summaryrefslogtreecommitdiff
path: root/keyboards/felix/config.h
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/felix/config.h')
-rw-r--r--keyboards/felix/config.h127
1 files changed, 0 insertions, 127 deletions
diff --git a/keyboards/felix/config.h b/keyboards/felix/config.h
deleted file mode 100644
index 73f9d1fa86..0000000000
--- a/keyboards/felix/config.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#pragma once
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Unikeyboard
-#define PRODUCT Felix
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 4
-
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B2, B3, B1, F7, F6 }
-#define MATRIX_COL_PINS { B5, B4, E6, D7 }
-#define UNUSED_PINS
-
-/* COL2ROW, ROW2COL */
-#define DIODE_DIRECTION ROW2COL
-
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
-
-#define BACKLIGHT_PIN C6
-#define BACKLIGHT_LEVELS 5
-//#define BACKLIGHT_BREATHING
-
-// #define RGB_DI_PIN E2
-// #ifdef RGB_DI_PIN
-// #define RGBLED_NUM 16
-// #define RGBLIGHT_HUE_STEP 8
-// #define RGBLIGHT_SAT_STEP 8
-// #define RGBLIGHT_VAL_STEP 8
-// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
-// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
-// /*== all animations enable ==*/
-// #define RGBLIGHT_ANIMATIONS
-// /*== or choose animations ==*/
-// #define RGBLIGHT_EFFECT_BREATHING
-// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
-// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
-// #define RGBLIGHT_EFFECT_SNAKE
-// #define RGBLIGHT_EFFECT_KNIGHT
-// #define RGBLIGHT_EFFECT_CHRISTMAS
-// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
-// #define RGBLIGHT_EFFECT_RGB_TEST
-// #define RGBLIGHT_EFFECT_ALTERNATING
-// /*== customize breathing effect ==*/
-// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
-// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
-// /*==== use exp() and sin() ====*/
-// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
-// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
-// #endif
-
-/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
-#define DEBOUNCE 5
-
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-// #define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-//#define NO_ACTION_MACRO
-//#define NO_ACTION_FUNCTION
-
-/* Bootmagic Lite key configuration */
-// #define BOOTMAGIC_LITE_ROW 0
-// #define BOOTMAGIC_LITE_COLUMN 0