diff options
Diffstat (limited to 'keyboards/facew')
| -rw-r--r-- | keyboards/facew/config.h | 1 | ||||
| -rw-r--r-- | keyboards/facew/facew.c | 54 | ||||
| -rw-r--r-- | keyboards/facew/readme.md | 40 | ||||
| -rw-r--r-- | keyboards/facew/rules.mk | 20 | ||||
| -rw-r--r-- | keyboards/facew/usbconfig.h | 12 |
5 files changed, 27 insertions, 100 deletions
diff --git a/keyboards/facew/config.h b/keyboards/facew/config.h index 62ba98be59..9a31f92783 100644 --- a/keyboards/facew/config.h +++ b/keyboards/facew/config.h @@ -21,6 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D +#define DEVICE_VER 0x0200 #define MANUFACTURER NotActuallyWinkeyless #define PRODUCT facew diff --git a/keyboards/facew/facew.c b/keyboards/facew/facew.c index 7ec56548b1..fa58f0cf79 100644 --- a/keyboards/facew/facew.c +++ b/keyboards/facew/facew.c @@ -16,51 +16,31 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "facew.h" -#ifdef BACKLIGHT_ENABLE -#include "backlight.h" -#endif -#ifdef RGBLIGHT_ENABLE -#include "rgblight.h" -#endif - -#include <avr/pgmspace.h> - -#include "action_layer.h" -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} void backlight_init_ports(void) { - DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); } void backlight_set(uint8_t level) { if (level == 0) { // Turn out the lights - PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6); + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); } else { // Turn on the lights - PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); } } diff --git a/keyboards/facew/readme.md b/keyboards/facew/readme.md index b749d18d29..a852a4f46d 100644 --- a/keyboards/facew/readme.md +++ b/keyboards/facew/readme.md @@ -4,44 +4,18 @@ A 60% no frills keyboard. The FaceW is a special run of the WKL B.Face sourced from Sprit that doesn't have underglow RGB LEDs but does have in switch LEDs. Also unlike the B.Face, it is based on ps2avru instead of ps2avrGB. It is designed and manufactured in Korea. -Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin) -Hardware Supported: FaceW Sprit Edition PCB -Hardware Availability: https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352 +* Keyboard Maintainer: [MechMerlin](www.github.com/mechmerlin) +* Hardware Supported: FaceW Sprit Edition PCB +* Hardware Availability: <https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=1352> Make example for this keyboard (after setting up your build environment): make facew:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** To put the FaceW into reset, hold `q` (`K01`) while plugging in. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + make facew:default:flash + +**Reset Key**: Hold down the key located at *K01*, commonly programmed as *q* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/facew/rules.mk b/keyboards/facew/rules.mk index c9942e3694..c4117d15d7 100644 --- a/keyboards/facew/rules.mk +++ b/keyboards/facew/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - # MCU name MCU = atmega32a @@ -34,11 +19,8 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 -# custom matrix setup -SRC = i2c_master.c - LAYOUTS = 60_ansi diff --git a/keyboards/facew/usbconfig.h b/keyboards/facew/usbconfig.h index f3d663f8a6..47755fa8c1 100644 --- a/keyboards/facew/usbconfig.h +++ b/keyboards/facew/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of @@ -237,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'S', 'p', 'r', 'i', 't' |