diff options
Diffstat (limited to 'keyboards/exclusive')
58 files changed, 0 insertions, 2995 deletions
diff --git a/keyboards/exclusive/e6_rgb/config.h b/keyboards/exclusive/e6_rgb/config.h deleted file mode 100644 index cb213c25e2..0000000000 --- a/keyboards/exclusive/e6_rgb/config.h +++ /dev/null @@ -1,65 +0,0 @@ -/** - * config.h - * - */ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xDEAD -#define PRODUCT_ID 0xFEED -#define DEVICE_VER 0x0062 -#define MANUFACTURER astro -#define PRODUCT e6rgb -#define DESCRIPTION 60% rgb keyboard - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 -/* key matrix pins */ -#define MATRIX_ROW_PINS { F1, F4, F5, F6, D6 } -#define MATRIX_COL_PINS { D7, B4, B5, B6, C6, C7, F7, F0, B0, B1, D2, D3, B3, B2 } -#define UNUSED_PINS -#define DIODE_DIRECTION COL2ROW - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -//rgb light setting -#define RGBLED_NUM 6 -#define RGB_DI_PIN B7 -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 - -#define DRIVER_ADDR_1 0b1010000 -#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. - -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 63 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL - -// tapping setting -#define TAPPING_TERM 200 -#define RETRO_TAPPING -#define PERMISSIVE_HOLD diff --git a/keyboards/exclusive/e6_rgb/e6_rgb.c b/keyboards/exclusive/e6_rgb/e6_rgb.c deleted file mode 100644 index d50af86b51..0000000000 --- a/keyboards/exclusive/e6_rgb/e6_rgb.c +++ /dev/null @@ -1,204 +0,0 @@ -/** - * e6_rgb.c - */ - -#include "e6_rgb.h" - -#ifdef RGB_MATRIX_ENABLE -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { - setPinOutput(D5); - writePinHigh(D5); -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ -//cs1 - {0, K_1, J_1, L_1}, - {0, H_1, G_1, I_1}, - {0, E_1, D_1, F_1}, - {0, B_1, A_1, C_1}, - -//cs2 - {0, K_2, J_2, L_2}, - {0, H_2, G_2, I_2}, - {0, E_2, D_2, F_2}, - {0, B_2, A_2, C_2}, -//cs3 - {0, K_3, J_3, L_3}, - {0, H_3, G_3, I_3}, - {0, E_3, D_3, F_3}, - {0, B_3, A_3, C_3}, -//cs4 - {0, K_4, J_4, L_4}, - {0, H_4, G_4, I_4}, - {0, E_4, D_4, F_4}, - {0, B_4, A_4, C_4}, -//cs5 - {0, K_5, J_5, L_5}, - {0, H_5, G_5, I_5}, - {0, E_5, D_5, F_5}, - {0, B_5, A_5, C_5}, -//cs6 - {0, K_6, J_6, L_6}, - {0, H_6, G_6, I_6}, - {0, E_6, D_6, F_6}, - {0, B_6, A_6, C_6}, -//cs7 - {0, K_7, J_7, L_7}, - {0, H_7, G_7, I_7}, - {0, E_7, D_7, F_7}, - {0, B_7, A_7, C_7}, -//cs8 - {0, K_8, J_8, L_8}, - {0, H_8, G_8, I_8}, - {0, E_8, D_8, F_8}, - {0, B_8, A_8, C_8}, -//cs9 - {0, K_9, J_9, L_9}, - {0, H_9, G_9, I_9}, - {0, E_9, D_9, F_9}, - {0, B_9, A_9, C_9}, -//cs10 - {0, K_10, J_10, L_10}, - {0, H_10, G_10, I_10}, - {0, E_10, D_10, F_10}, - {0, B_10, A_10, C_10}, -//cs11 - {0, K_11, J_11, L_11}, - {0, H_11, G_11, I_11}, - {0, E_11, D_11, F_11}, - {0, B_11, A_11, C_11}, -//cs12 - {0, K_12, J_12, L_12}, - {0, H_12, G_12, I_12}, - {0, E_12, D_12, F_12}, - {0, B_12, A_12, C_12}, -//cs13 - {0, K_13, J_13, L_13}, - {0, H_13, G_13, I_13}, - {0, E_13, D_13, F_13}, - {0, B_13, A_13, C_13}, -//cs14 - {0, K_14, J_14, L_14}, - {0, H_14, G_14, I_14}, - {0, E_14, D_14, F_14}, - {0, B_14, A_14, C_14}, -//cs15 - {0, K_15, J_15, L_15}, - - {0, E_15, D_15, F_15}, - {0, B_15, A_15, C_15}, -//cs16 - {0, K_16, J_16, L_16}, - {0, H_16, G_16, I_16}, - {0, E_16, D_16, F_16}, - {0, B_16, A_16, C_16}, -}; -const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { -/* {row | col << 4} - * | {x=0..224, y=0..64} - * | | modifier - * | | | */ -//cs1 - {{0|(0<<4)}, { 0, 0}, 1}, - {{0|(1<<4)}, { 17, 0}, 0}, - {{1|(0<<4)}, { 0, 16}, 1}, - {{2|(0<<4)}, { 0, 32}, 1}, - -//cs2 - {{0|(2<<4)}, { 34, 0}, 0}, - {{0|(3<<4)}, { 51, 0}, 0}, - {{1|(1<<4)}, { 17, 16}, 0}, - {{1|(2<<4)}, { 34, 16}, 0}, -//cs3 - {{2|(1<<4)}, { 17, 32}, 0}, - {{2|(2<<4)}, { 34, 32}, 0}, - {{3|(1<<4)}, { 17, 48}, 0}, - {{3|(2<<4)}, { 34, 48}, 0}, -//cs4 - {{0|(4<<4)}, { 68, 0}, 0}, - {{0|(5<<4)}, { 85, 0}, 0}, - {{1|(3<<4)}, { 51, 16}, 0}, - {{1|(4<<4)}, { 68, 16}, 0}, -//cs5 - {{0|(11<<4)}, {187, 0}, 0}, - {{0|(12<<4)}, {204, 0}, 0}, - {{1|(11<<4)}, {187, 16}, 0}, - {{1|(12<<4)}, {204, 16}, 0}, -//cs6 - {{0|(7<<4)}, {119, 0}, 0}, - {{0|(8<<4)}, {136, 0}, 0}, - {{1|(7<<4)}, {119, 16}, 0}, - {{1|(8<<4)}, {136, 16}, 0}, -//cs7 - {{0|(9<<4)}, {153, 0}, 0}, - {{0|(10<<4)}, {170, 0}, 0}, - {{1|(9<<4)}, {153, 16}, 0}, - {{1|(10<<4)}, {170, 16}, 0}, -//cs8 - {{0|(13<<4)}, {221, 0}, 0}, - {{0|(14<<4)}, {221, 0}, 0}, - {{1|(13<<4)}, {221, 32}, 1}, - {{2|(12<<4)}, {221, 16}, 1}, -//cs9 - {{2|(3<<4)}, { 51, 32}, 0}, - {{2|(4<<4)}, { 68, 32}, 0}, - {{3|(3<<4)}, { 51, 48}, 0}, - {{3|(4<<4)}, { 68, 48}, 0}, -//cs10 - {{0|(6<<4)}, {102, 0}, 0}, - {{1|(5<<4)}, { 85, 16}, 0}, - {{1|(6<<4)}, {102, 16}, 0}, - {{2|(5<<4)}, { 85, 32}, 0}, -//cs11 - {{2|(6<<4)}, {102, 32}, 0}, - {{3|(5<<4)}, { 85, 48}, 0}, - {{3|(6<<4)}, {102, 48}, 0}, - {{4|(5<<4)}, {102, 64}, 0}, -//cs12 - {{2|(7<<4)}, {119, 32}, 0}, - {{2|(8<<4)}, {136, 32}, 0}, - {{3|(7<<4)}, {119, 48}, 0}, - {{3|(8<<4)}, {136, 48}, 0}, -//cs13 - {{2|(9<<4)}, {153, 32}, 0}, - {{2|(10<<4)}, {170, 32}, 0}, - {{3|(9<<4)}, {153, 48}, 0}, - {{4|(6<<4)}, {136, 48}, 1}, -//cs14 - {{2|(11<<4)}, {187, 32}, 0}, - {{3|(10<<4)}, {170, 48}, 0}, - {{3|(11<<4)}, {187, 48}, 1}, - {{4|(7<<4)}, {153, 48}, 1}, -//cs15 - {{3|(12<<4)}, {221, 48}, 1}, - - {{4|(9<<4)}, {221, 64}, 1}, - {{4|(8<<4)}, {204, 64}, 1}, -//cs16 - {{3|(0<<4)}, { 0, 48}, 1}, - {{4|(0<<4)}, { 0, 64}, 1}, - {{4|(1<<4)}, { 17, 64}, 1}, - {{4|(2<<4)}, { 34, 64}, 1}, -}; -#endif diff --git a/keyboards/exclusive/e6_rgb/e6_rgb.h b/keyboards/exclusive/e6_rgb/e6_rgb.h deleted file mode 100644 index 01f700c009..0000000000 --- a/keyboards/exclusive/e6_rgb/e6_rgb.h +++ /dev/null @@ -1,83 +0,0 @@ - /** - * e6_rgb.h - * - */ -#pragma once - -#include "quantum.h" - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguements -// The second converts the arguments into a two-dimensional array -#define LAYOUT_60_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k42, k43, k47, k48, k49, k4a, k4b \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, KC_NO}, \ - {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k48, k49, k4a, k4b} \ -} - -#define LAYOUT_60_wkl( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k42, k43, k47, k49, k4a, k4b \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \ - {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, k4b} \ -} - -#define LAYOUT_60_hhkb( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k42, k43, k47, k49, k4a \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3c, k3d}, \ - {KC_NO, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, KC_NO} \ -} -#define LAYOUT_60_wkl_split_bs( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k42, k43, k47, k49, k4a, k4b \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \ - {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, k4b} \ -} -#define LAYOUT_60_ansi_split_bs_shift( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k42, k43, k47, k48, k49, k4a, k4b \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \ - {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k48, k49, k4a, k4b} \ -} diff --git a/keyboards/exclusive/e6_rgb/info.json b/keyboards/exclusive/e6_rgb/info.json deleted file mode 100644 index 80f3610029..0000000000 --- a/keyboards/exclusive/e6_rgb/info.json +++ /dev/null @@ -1,21 +0,0 @@ -{ - "keyboard_name": "e6_rgb", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_60_wkl": { - "key_count":61, - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] - }, - "LAYOUT_60_ansi": { - "key_count":61, - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - "LAYOUT_60_hhkb": { - "key_count":60, - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}] - } - } -} diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_ansi/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_ansi/keymap.c deleted file mode 100644 index 0f7f09f551..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_ansi/keymap.c +++ /dev/null @@ -1,29 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BSp | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| - * |-----------------------------------------------------------' - * |Ctrl |Gui|Alt | Space |Alt |Gui|Fn |Ctrl | - * `-----------------------------------------------------------' - */ - [0] = LAYOUT_60_ansi( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,\ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), - [1] = LAYOUT_60_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,_______,_______,_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_shift/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_shift/keymap.c deleted file mode 100644 index 1ecde0089c..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_shift/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_ansi_split_bs_shift( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_END,\ - KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, KC_RGUI, TG(1), KC_RCTL), - [1] = LAYOUT_60_ansi_split_bs_shift( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,_______,TG(0),_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_hhkb/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_hhkb/keymap.c deleted file mode 100644 index e1d2cca372..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_hhkb/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_hhkb( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_BSLS,\ - KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1)), - [1] = LAYOUT_60_hhkb( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,_______,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______, _______, _______,_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_wkl/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_wkl/keymap.c deleted file mode 100644 index e149c7f06b..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_wkl/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_wkl( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_DEL,\ - KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, TG(1), KC_RCTL), - [1] = LAYOUT_60_wkl( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_DEL,\ - RESET, RGB_TOG, RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,TG(0),_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_wkl_split_bs/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_wkl_split_bs/keymap.c deleted file mode 100644 index d9a7885eb8..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_wkl_split_bs/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_wkl_split_bs( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_END,\ - KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, TG(1), KC_RCTL), - [1] = LAYOUT_60_wkl_split_bs( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,TG(0),_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/default/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/default/keymap.c deleted file mode 100644 index 0f7f09f551..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/default/keymap.c +++ /dev/null @@ -1,29 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BSp | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| - * |-----------------------------------------------------------' - * |Ctrl |Gui|Alt | Space |Alt |Gui|Fn |Ctrl | - * `-----------------------------------------------------------' - */ - [0] = LAYOUT_60_ansi( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,\ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), - [1] = LAYOUT_60_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,_______,_______,_______), -}; diff --git a/keyboards/exclusive/e6_rgb/readme.md b/keyboards/exclusive/e6_rgb/readme.md deleted file mode 100644 index b252ab53b4..0000000000 --- a/keyboards/exclusive/e6_rgb/readme.md +++ /dev/null @@ -1,12 +0,0 @@ -# e6 pcb with rgb - -A full rgb pcb for exclusive E6V1&V2 - -Keyboard Maintainer: [astro](https://github.com/yulei) -Hardware Supported: E6V1, E6V2 - -Make example for this keyboard (after setting up your build environment): - - make exclusive/e6_rgb:60_ansi - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/exclusive/e6_rgb/rules.mk b/keyboards/exclusive/e6_rgb/rules.mk deleted file mode 100644 index 9e4e0f58f5..0000000000 --- a/keyboards/exclusive/e6_rgb/rules.mk +++ /dev/null @@ -1,77 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# project specific files -#SRC = - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -BOOTLOADER = atmel-dfu -#OPT_DEFS += -DBOOTLOADER_SIZE=4096 - -# Do not put the microcontroller into power saving mode -# when we get USB suspend event. We want it to keep updating -# backlight effects. -#OPT_DEFS += -DNO_SUSPEND_POWER_DOWN - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -#RGBLIGHT_ENABLE = yes # Use RGB bottom light -RGB_MATRIX_ENABLE = IS31FL3733# Use RGB matrix -LAYOUTS = 60_ansi 60_hhkb diff --git a/keyboards/exclusive/e6v2/bmc/bmc.c b/keyboards/exclusive/e6v2/bmc/bmc.c deleted file mode 100644 index e3dd244c51..0000000000 --- a/keyboards/exclusive/e6v2/bmc/bmc.c +++ /dev/null @@ -1,96 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include "bmc.h" -#include "rgblight.h" -#include "i2c.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); -} -#endif - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -void backlight_init_ports(void) { - // initialize pins D0, D1, D4 and D6 as output - setPinOutput(D0); - setPinOutput(D1); - setPinOutput(D4); - setPinOutput(D6); - - // turn RGB LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); -} - -void backlight_set(uint8_t level) { - if (level == 0) { - // turn RGB LEDs off - writePinLow(D0); - writePinLow(D1); - writePinLow(D4); - writePinLow(D6); - } else { - // turn RGB LEDs on - writePinHigh(D0); - writePinHigh(D1); - writePinHigh(D4); - writePinHigh(D6); - } -} diff --git a/keyboards/exclusive/e6v2/bmc/bmc.h b/keyboards/exclusive/e6v2/bmc/bmc.h deleted file mode 100644 index 06d23fbe69..0000000000 --- a/keyboards/exclusive/e6v2/bmc/bmc.h +++ /dev/null @@ -1,101 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#pragma once - -#include "quantum.h" - -/* This a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ - -// LAYOUT_all ignores the key often coded as ~# to the left of Enter on ISO layouts. -// This is done as it shares the same row AND col as the pipe key. -#define LAYOUT_all( \ - k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \ - k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \ - k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26, \ - k10, k53, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54, \ - k00, k01, k02, k75, k04, k08, k09, k05 \ -) \ -{ \ - { k00, k01, k02, KC_NO, k04, k05, KC_NO, KC_NO, k08, k09, KC_NO }, \ - { k10, k11, k12, k13, k14, k15, KC_NO, KC_NO, k18, k19, KC_NO }, \ - { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, KC_NO }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, KC_NO }, \ - { KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4A }, \ - { k50, KC_NO, k52, k53, k54, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, k61, k62, k63, k64, KC_NO, k66, k67, k68, KC_NO, k6A }, \ - { KC_NO, k71, k72, k73, k74, k75, k76, k77, k78, KC_NO, k7A }, \ -} - -#define LAYOUT_60_ansi( \ - k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k4A, \ - k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \ - k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26, \ - k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, \ - k00, k01, k02, k75, k04, k08, k09, k05 \ -) \ -{ \ - { k00, k01, k02, KC_NO, k04, k05, KC_NO, KC_NO, k08, k09, KC_NO }, \ - { k10, k11, k12, k13, k14, k15, KC_NO, KC_NO, k18, k19, KC_NO }, \ - { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, KC_NO }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, KC_NO }, \ - { KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4A }, \ - { k50, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, k61, k62, k63, k64, KC_NO, k66, k67, k68, KC_NO, k6A }, \ - { KC_NO, k71, k72, k73, k74, k75, k76, k77, k78, KC_NO, k7A }, \ -} - -#define LAYOUT_60_hhkb( \ - k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \ - k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \ - k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26, \ - k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54, \ - k01, k02, k75, k08, k09 \ -) \ -{ \ - { KC_NO, k01, k02, KC_NO, KC_NO, k05, KC_NO, KC_NO, k08, k09, KC_NO }, \ - { k10, k11, k12, k13, k14, k15, KC_NO, KC_NO, k18, k19, KC_NO }, \ - { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, KC_NO }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, KC_NO }, \ - { KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4A }, \ - { k50, KC_NO, k52, KC_NO, k54, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, k61, k62, k63, k64, KC_NO, k66, k67, k68, KC_NO, k6A }, \ - { KC_NO, k71, k72, k73, k74, k75, k76, k77, k78, KC_NO, k7A }, \ -} - -#define LAYOUT_60_tsangan( \ - k50, k41, k42, k43, k44, k45, k61, k68, k78, k71, k49, k48, k47, k52, k4A, \ - k30, k31, k32, k33, k34, k35, k62, k67, k77, k72, k39, k38, k37, k36, \ - k20, k21, k22, k23, k24, k25, k63, k66, k76, k73, k29, k28, k26, \ - k10, k11, k12, k13, k14, k15, k64, k6A, k7A, k74, k19, k18, k54, \ - k00, k01, k02, k75, k08, k09, k05 \ -) \ -{ \ - { k00, k01, k02, KC_NO, KC_NO, k05, KC_NO, KC_NO, k08, k09, KC_NO }, \ - { k10, k11, k12, k13, k14, k15, KC_NO, KC_NO, k18, k19, KC_NO }, \ - { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, KC_NO }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, KC_NO }, \ - { KC_NO, k41, k42, k43, k44, k45, KC_NO, k47, k48, k49, k4A }, \ - { k50, KC_NO, k52, KC_NO, k54, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, k61, k62, k63, k64, KC_NO, k66, k67, k68, KC_NO, k6A }, \ - { KC_NO, k71, k72, k73, k74, k75, k76, k77, k78, KC_NO, k7A }, \ -} diff --git a/keyboards/exclusive/e6v2/bmc/config.h b/keyboards/exclusive/e6v2/bmc/config.h deleted file mode 100644 index aae4d56dd9..0000000000 --- a/keyboards/exclusive/e6v2/bmc/config.h +++ /dev/null @@ -1,57 +0,0 @@ -/* -Copyright 2019 MechMerlin - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER exclusive -#define PRODUCT e6v2 bmc -#define DESCRIPTION A custom 60% keyboard - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 11 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - -// 0 1 2 3 4 5 6 7 8 9 A -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, C2, C3, C4, C5, D7 } -#define DIODE_DIRECTION COL2ROW - - -#define RGBLED_NUM 6 -#define RGBLIGHT_ANIMATIONS - -#define NO_UART 1 -#define BOOTLOADHID_BOOTLOADER 1 - -// Set bootmagic lite key to the key commonly programmed as Esc. -#define BOOTMAGIC_LITE_ROW 5 -#define BOOTMAGIC_LITE_COLUMN 0
\ No newline at end of file diff --git a/keyboards/exclusive/e6v2/bmc/i2c.c b/keyboards/exclusive/e6v2/bmc/i2c.c deleted file mode 100644 index 801242e0d0..0000000000 --- a/keyboards/exclusive/e6v2/bmc/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -// Please do not modify this file - -#include <avr/io.h> -#include <util/twi.h> - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the start condition was successfully transmitted - if ((TWSR & 0xF8) != TW_START) { - return 1; - } - - // transmit address and wait - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the device has acknowledged the READ / WRITE mode - uint8_t twst = TW_STATUS & 0xF8; - if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { - return 1; - } - - return 0; -} - -void i2c_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); -} - -uint8_t i2c_write(uint8_t data) { - TWDR = data; - - // transmit data and wait - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { - return 1; - } - - return 0; -} - -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { - if (i2c_start(address)) { - return 1; - } - - for (uint16_t i = 0; i < length; i++) { - if (i2c_write(data[i])) { - return 1; - } - } - - i2c_stop(); - - return 0; -}
\ No newline at end of file diff --git a/keyboards/exclusive/e6v2/bmc/i2c.h b/keyboards/exclusive/e6v2/bmc/i2c.h deleted file mode 100644 index 5407d7bee3..0000000000 --- a/keyboards/exclusive/e6v2/bmc/i2c.h +++ /dev/null @@ -1,24 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -// Please do not modify this file - -#pragma once - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
\ No newline at end of file diff --git a/keyboards/exclusive/e6v2/bmc/info.json b/keyboards/exclusive/e6v2/bmc/info.json deleted file mode 100644 index aa6d171ba8..0000000000 --- a/keyboards/exclusive/e6v2/bmc/info.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "keyboard_name": "", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT_all": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.26}, {"x":10.0, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_60_ansi": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_60_hhkb": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"|", "x":13, "y":0}, {"label":"~", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"Delete", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] - }, - - "LAYOUT_60_tsangan": { - "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}] - } - } -}
\ No newline at end of file diff --git a/keyboards/exclusive/e6v2/bmc/keymaps/default/config.h b/keyboards/exclusive/e6v2/bmc/keymaps/default/config.h deleted file mode 100644 index 26c6d6ade1..0000000000 --- a/keyboards/exclusive/e6v2/bmc/keymaps/default/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -// place overrides here diff --git a/keyboards/exclusive/e6v2/bmc/keymaps/default/keymap.c b/keyboards/exclusive/e6v2/bmc/keymaps/default/keymap.c deleted file mode 100644 index 7300419176..0000000000 --- a/keyboards/exclusive/e6v2/bmc/keymaps/default/keymap.c +++ /dev/null @@ -1,74 +0,0 @@ -/* Copyright 2019 MechMerlin - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include QMK_KEYBOARD_H - -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT_60_ansi( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, MO(1) - ), - -[1] = LAYOUT_60_ansi( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - BL_TOGG, BL_INC, BL_DEC, BL_STEP, RESET, EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - } - return true; -} - -void matrix_init_user(void) { - -} - -void matrix_scan_user(void) { - -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/exclusive/e6v2/bmc/keymaps/default/readme.md b/keyboards/exclusive/e6v2/bmc/keymaps/default/readme.md deleted file mode 100644 index 4a1b6efa62..0000000000 --- a/keyboards/exclusive/e6v2/bmc/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for bmc diff --git a/keyboards/exclusive/e6v2/bmc/readme.md b/keyboards/exclusive/e6v2/bmc/readme.md deleted file mode 100644 index 3e2d19748d..0000000000 --- a/keyboards/exclusive/e6v2/bmc/readme.md +++ /dev/null @@ -1,44 +0,0 @@ -# E6-V2 Bootmapper Client (ps2avrgb) - -These docs are for the BMC version of the E6-V2 PCB which has an atmega32a microcontroller. Please do not flash this `.hex` file on your atmega32u4 equipped E6-V2. - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller -Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) - -Make example for this keyboard (after setting up your build environment): - - make exclusive/e6v2/bmc:default - -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K50`, commonly programmed as the escape key. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python - pip3 install pyusb - brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/exclusive/e6v2/bmc/rules.mk b/keyboards/exclusive/e6v2/bmc/rules.mk deleted file mode 100644 index 7c3e16b154..0000000000 --- a/keyboards/exclusive/e6v2/bmc/rules.mk +++ /dev/null @@ -1,90 +0,0 @@ -# MCU name -#MCU = at90usb1286 -MCU = atmega32a -PROTOCOL = VUSB - -NO_UART = yes -NO_SUSPEND_POWER_DOWN = yes - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 12000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -# ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -# F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS = -DDEBUG_LEVEL=0 - - -# Bootloader selection -# Teensy halfkay -# Pro Micro caterina -# Atmel DFU atmel-dfu -# LUFA DFU lufa-dfu -# QMK DFU qmk-dfu -# atmega32a bootloadHID -BOOTLOADER = bootloadHID - - -# If you don't know the bootloader type, then you can specify the -# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -# OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_CUSTOM_DRIVER = yes -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 -FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) - -SRC += i2c.c - -PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/exclusive/e6v2/bmc/usbconfig.h b/keyboards/exclusive/e6v2/bmc/usbconfig.h deleted file mode 100644 index c52c90ce8a..0000000000 --- a/keyboards/exclusive/e6v2/bmc/usbconfig.h +++ /dev/null @@ -1,393 +0,0 @@ -/* Name: usbconfig.h - * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers - * Author: Christian Starkjohann - * Creation Date: 2005-04-01 - * Tabsize: 4 - * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH - * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) - * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ - */ - -#pragma once - -#include "config.h" - -/* -General Description: -This file is an example configuration (with inline documentation) for the USB -driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is -also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may -wire the lines to any other port, as long as D+ is also wired to INT0 (or any -other hardware interrupt, as long as it is the highest level interrupt, see -section at the end of this file). -*/ - -/* ---------------------------- Hardware Config ---------------------------- */ - -#define USB_CFG_IOPORTNAME D -/* This is the port where the USB bus is connected. When you configure it to - * "B", the registers PORTB, PINB and DDRB will be used. - */ -#define USB_CFG_DMINUS_BIT 3 -/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected. - * This may be any bit in the port. - */ -#define USB_CFG_DPLUS_BIT 2 -/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected. - * This may be any bit in the port. Please note that D+ must also be connected - * to interrupt pin INT0! [You can also use other interrupts, see section - * "Optional MCU Description" below, or you can connect D- to the interrupt, as - * it is required if you use the USB_COUNT_SOF feature. If you use D- for the - * interrupt, the USB interrupt will also be triggered at Start-Of-Frame - * markers every millisecond.] - */ -#define USB_CFG_CLOCK_KHZ (F_CPU/1000) -/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000, - * 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code - * require no crystal, they tolerate +/- 1% deviation from the nominal - * frequency. All other rates require a precision of 2000 ppm and thus a - * crystal! - * Since F_CPU should be defined to your actual clock rate anyway, you should - * not need to modify this setting. - */ -#define USB_CFG_CHECK_CRC 0 -/* Define this to 1 if you want that the driver checks integrity of incoming - * data packets (CRC checks). CRC checks cost quite a bit of code size and are - * currently only available for 18 MHz crystal clock. You must choose - * USB_CFG_CLOCK_KHZ = 18000 if you enable this option. - */ - -/* ----------------------- Optional Hardware Config ------------------------ */ - -/* #define USB_CFG_PULLUP_IOPORTNAME D */ -/* If you connect the 1.5k pullup resistor from D- to a port pin instead of - * V+, you can connect and disconnect the device from firmware by calling - * the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). - * This constant defines the port on which the pullup resistor is connected. - */ -/* #define USB_CFG_PULLUP_BIT 4 */ -/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined - * above) where the 1.5k pullup resistor is connected. See description - * above for details. - */ - -/* --------------------------- Functional Range ---------------------------- */ - -#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 -/* Define this to 1 if you want to compile a version with two endpoints: The - * default control endpoint 0 and an interrupt-in endpoint (any other endpoint - * number). - */ -#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 -/* Define this to 1 if you want to compile a version with three endpoints: The - * default control endpoint 0, an interrupt-in endpoint 3 (or the number - * configured below) and a catch-all default interrupt-in endpoint as above. - * You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. - */ -#define USB_CFG_EP3_NUMBER 3 -/* If the so-called endpoint 3 is used, it can now be configured to any other - * endpoint number (except 0) with this macro. Default if undefined is 3. - */ -/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ -/* The above macro defines the startup condition for data toggling on the - * interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. - * Since the token is toggled BEFORE sending any data, the first packet is - * sent with the oposite value of this configuration! - */ -#define USB_CFG_IMPLEMENT_HALT 0 -/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature - * for endpoint 1 (interrupt endpoint). Although you may not need this feature, - * it is required by the standard. We have made it a config option because it - * bloats the code considerably. - */ -#define USB_CFG_SUPPRESS_INTR_CODE 0 -/* Define this to 1 if you want to declare interrupt-in endpoints, but don't - * want to send any data over them. If this macro is defined to 1, functions - * usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if - * you need the interrupt-in endpoints in order to comply to an interface - * (e.g. HID), but never want to send any data. This option saves a couple - * of bytes in flash memory and the transmit buffers in RAM. - */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ -#define USB_CFG_IS_SELF_POWERED 0 -/* Define this to 1 if the device has its own power supply. Set it to 0 if the - * device is powered from the USB bus. - */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ -#define USB_CFG_IMPLEMENT_FN_WRITE 1 -/* Set this to 1 if you want usbFunctionWrite() to be called for control-out - * transfers. Set it to 0 if you don't need it and want to save a couple of - * bytes. - */ -#define USB_CFG_IMPLEMENT_FN_READ 0 -/* Set this to 1 if you need to send control replies which are generated - * "on the fly" when usbFunctionRead() is called. If you only want to send - * data from a static buffer, set it to 0 and return the data from - * usbFunctionSetup(). This saves a couple of bytes. - */ -#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 -/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints. - * You must implement the function usbFunctionWriteOut() which receives all - * interrupt/bulk data sent to any endpoint other than 0. The endpoint number - * can be found in 'usbRxToken'. - */ -#define USB_CFG_HAVE_FLOWCONTROL 0 -/* Define this to 1 if you want flowcontrol over USB data. See the definition - * of the macros usbDisableAllRequests() and usbEnableAllRequests() in - * usbdrv.h. - */ -#define USB_CFG_DRIVER_FLASH_PAGE 0 -/* If the device has more than 64 kBytes of flash, define this to the 64 k page - * where the driver's constants (descriptors) are located. Or in other words: - * Define this to 1 for boot loaders on the ATMega128. - */ -#define USB_CFG_LONG_TRANSFERS 0 -/* Define this to 1 if you want to send/receive blocks of more than 254 bytes - * in a single control-in or control-out transfer. Note that the capability - * for long transfers increases the driver size. - */ -/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ -/* This macro is a hook if you want to do unconventional things. If it is - * defined, it's inserted at the beginning of received message processing. - * If you eat the received message and don't want default processing to - * proceed, do a return after doing your things. One possible application - * (besides debugging) is to flash a status LED on each packet. - */ -/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ -/* This macro is a hook if you need to know when an USB RESET occurs. It has - * one parameter which distinguishes between the start of RESET state and its - * end. - */ -/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ -/* This macro (if defined) is executed when a USB SET_ADDRESS request was - * received. - */ -#define USB_COUNT_SOF 1 -/* define this macro to 1 if you need the global variable "usbSofCount" which - * counts SOF packets. This feature requires that the hardware interrupt is - * connected to D- instead of D+. - */ -/* #ifdef __ASSEMBLER__ - * macro myAssemblerMacro - * in YL, TCNT0 - * sts timer0Snapshot, YL - * endm - * #endif - * #define USB_SOF_HOOK myAssemblerMacro - * This macro (if defined) is executed in the assembler module when a - * Start Of Frame condition is detected. It is recommended to define it to - * the name of an assembler macro which is defined here as well so that more - * than one assembler instruction can be used. The macro may use the register - * YL and modify SREG. If it lasts longer than a couple of cycles, USB messages - * immediately after an SOF pulse may be lost and must be retried by the host. - * What can you do with this hook? Since the SOF signal occurs exactly every - * 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in - * designs running on the internal RC oscillator. - * Please note that Start Of Frame detection works only if D- is wired to the - * interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! - */ -#define USB_CFG_CHECK_DATA_TOGGLING 0 -/* define this macro to 1 if you want to filter out duplicate data packets - * sent by the host. Duplicates occur only as a consequence of communication - * errors, when the host does not receive an ACK. Please note that you need to - * implement the filtering yourself in usbFunctionWriteOut() and - * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable - * for each control- and out-endpoint to check for duplicate packets. - */ -#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 -/* define this macro to 1 if you want the function usbMeasureFrameLength() - * compiled in. This function can be used to calibrate the AVR's RC oscillator. - */ -#define USB_USE_FAST_CRC 0 -/* The assembler module has two implementations for the CRC algorithm. One is - * faster, the other is smaller. This CRC routine is only used for transmitted - * messages where timing is not critical. The faster routine needs 31 cycles - * per byte while the smaller one needs 61 to 69 cycles. The faster routine - * may be worth the 32 bytes bigger code size if you transmit lots of data and - * run the AVR close to its limit. - */ - -/* -------------------------- Device Description --------------------------- */ - -#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) -/* USB vendor ID for the device, low byte first. If you have registered your - * own Vendor ID, define it here. Otherwise you may use one of obdev's free - * shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) -/* This is the ID of the product, low byte first. It is interpreted in the - * scope of the vendor ID. If you have registered your own VID with usb.org - * or if you have licensed a PID from somebody else, define it here. Otherwise - * you may use one of obdev's free shared VID/PID pairs. See the file - * USB-IDs-for-free.txt for details! - * *** IMPORTANT NOTE *** - * This template uses obdev's shared VID/PID pair for Vendor Class devices - * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand - * the implications! - */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 -/* Version number of the device: Minor number first, then major number. - */ -#define USB_CFG_VENDOR_NAME 'G', 'r', 'a', 'y', ' ', 'S', 't', 'u', 'd', 'i', 'o' -#define USB_CFG_VENDOR_NAME_LEN 11 -/* These two values define the vendor name returned by the USB device. The name - * must be given as a list of characters under single quotes. The characters - * are interpreted as Unicode (UTF-16) entities. - * If you don't want a vendor name string, undefine these macros. - * ALWAYS define a vendor name containing your Internet domain name if you use - * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for - * details. - */ -#define USB_CFG_DEVICE_NAME 'H', 'B', '8', '5' -#define USB_CFG_DEVICE_NAME_LEN 4 -/* Same as above for the device name. If you don't want a device name, undefine - * the macros. See the file USB-IDs-for-free.txt before you assign a name if - * you use a shared VID/PID. - */ -/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ -/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ -/* Same as above for the serial number. If you don't want a serial number, - * undefine the macros. - * It may be useful to provide the serial number through other means than at - * compile time. See the section about descriptor properties below for how - * to fine tune control over USB descriptors such as the string descriptor - * for the serial number. - */ -#define USB_CFG_DEVICE_CLASS 0 -#define USB_CFG_DEVICE_SUBCLASS 0 -/* See USB specification if you want to conform to an existing device class. - * Class 0xff is "vendor specific". - */ -#define USB_CFG_INTERFACE_CLASS 3 /* HID */ -#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ -#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ -/* See USB specification if you want to conform to an existing device class or - * protocol. The following classes must be set at interface level: - * HID class is 3, no subclass and protocol required (but may be useful!) - * CDC class is 2, use subclass 2 and protocol 1 for ACM - */ -#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 -/* Define this to the length of the HID report descriptor, if you implement - * an HID device. Otherwise don't define it or define it to 0. - * If you use this define, you must add a PROGMEM character array named - * "usbHidReportDescriptor" to your code which contains the report descriptor. - * Don't forget to keep the array and this define in sync! - */ - -/* #define USB_PUBLIC static */ -/* Use the define above if you #include usbdrv.c instead of linking against it. - * This technique saves a couple of bytes in flash memory. - */ - -/* ------------------- Fine Control over USB Descriptors ------------------- */ -/* If you don't want to use the driver's default USB descriptors, you can - * provide our own. These can be provided as (1) fixed length static data in - * flash memory, (2) fixed length static data in RAM or (3) dynamically at - * runtime in the function usbFunctionDescriptor(). See usbdrv.h for more - * information about this function. - * Descriptor handling is configured through the descriptor's properties. If - * no properties are defined or if they are 0, the default descriptor is used. - * Possible properties are: - * + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched - * at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is - * used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if - * you want RAM pointers. - * + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found - * in static memory is in RAM, not in flash memory. - * + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), - * the driver must know the descriptor's length. The descriptor itself is - * found at the address of a well known identifier (see below). - * List of static descriptor names (must be declared PROGMEM if in flash): - * char usbDescriptorDevice[]; - * char usbDescriptorConfiguration[]; - * char usbDescriptorHidReport[]; - * char usbDescriptorString0[]; - * int usbDescriptorStringVendor[]; - * int usbDescriptorStringDevice[]; - * int usbDescriptorStringSerialNumber[]; - * Other descriptors can't be provided statically, they must be provided - * dynamically at runtime. - * - * Descriptor properties are or-ed or added together, e.g.: - * #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) - * - * The following descriptors are defined: - * USB_CFG_DESCR_PROPS_DEVICE - * USB_CFG_DESCR_PROPS_CONFIGURATION - * USB_CFG_DESCR_PROPS_STRINGS - * USB_CFG_DESCR_PROPS_STRING_0 - * USB_CFG_DESCR_PROPS_STRING_VENDOR - * USB_CFG_DESCR_PROPS_STRING_PRODUCT - * USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER - * USB_CFG_DESCR_PROPS_HID - * USB_CFG_DESCR_PROPS_HID_REPORT - * USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) - * - * Note about string descriptors: String descriptors are not just strings, they - * are Unicode strings prefixed with a 2 byte header. Example: - * int serialNumberDescriptor[] = { - * USB_STRING_DESCRIPTOR_HEADER(6), - * 'S', 'e', 'r', 'i', 'a', 'l' - * }; - */ - -#define USB_CFG_DESCR_PROPS_DEVICE 0 -#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0 -#define USB_CFG_DESCR_PROPS_STRINGS 0 -#define USB_CFG_DESCR_PROPS_STRING_0 0 -#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 -#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 -#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 -#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID 0 -#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC -//#define USB_CFG_DESCR_PROPS_HID_REPORT 0 -#define USB_CFG_DESCR_PROPS_UNKNOWN 0 - -#define usbMsgPtr_t unsigned short -/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to - * a scalar type here because gcc generates slightly shorter code for scalar - * arithmetics than for pointer arithmetics. Remove this define for backward - * type compatibility or define it to an 8 bit type if you use data in RAM only - * and all RAM is below 256 bytes (tiny memory model in IAR CC). - */ - -/* ----------------------- Optional MCU Description ------------------------ */ - -/* The following configurations have working defaults in usbdrv.h. You - * usually don't need to set them explicitly. Only if you want to run - * the driver on a device which is not yet supported or with a compiler - * which is not fully supported (such as IAR C) or if you use a differnt - * interrupt than INT0, you may have to define some of these. - */ -/* #define USB_INTR_CFG MCUCR */ -/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE GIMSK */ -/* #define USB_INTR_ENABLE_BIT INT0 */ -/* #define USB_INTR_PENDING GIFR */ -/* #define USB_INTR_PENDING_BIT INTF0 */ -/* #define USB_INTR_VECTOR INT0_vect */ - -/* Set INT1 for D- falling edge to count SOF */ -/* #define USB_INTR_CFG EICRA */ -#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) -/* #define USB_INTR_CFG_CLR 0 */ -/* #define USB_INTR_ENABLE EIMSK */ -#define USB_INTR_ENABLE_BIT INT1 -/* #define USB_INTR_PENDING EIFR */ -#define USB_INTR_PENDING_BIT INTF1 -#define USB_INTR_VECTOR INT1_vect diff --git a/keyboards/exclusive/e6v2/le/config.h b/keyboards/exclusive/e6v2/le/config.h deleted file mode 100644 index 580929ba8a..0000000000 --- a/keyboards/exclusive/e6v2/le/config.h +++ /dev/null @@ -1,59 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0002 -#define MANUFACTURER Exclusive / E-Team -#define PRODUCT E6-V2 LE -#define DESCRIPTION E6-V2 LE QMK PCB (Mid-Port) - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* QMK E6-V2 PCB default pin-out */ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } -#define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 } -#define UNUSED_PINS - -#define RGB_DI_PIN E6 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 12 -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 12 -#define RGBLIGHT_VAL_STEP 12 -#endif - -#define BACKLIGHT_PIN B6 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 2 -#define BACKLIGHT_BREAHTING -#define BREATHING_PERIOD 3 -#endif - -#define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 - -#endif diff --git a/keyboards/exclusive/e6v2/le/info.json b/keyboards/exclusive/e6v2/le/info.json deleted file mode 100644 index 5a44eab18c..0000000000 --- a/keyboards/exclusive/e6v2/le/info.json +++ /dev/null @@ -1,19 +0,0 @@ -{ - "keyboard_name": "E6-V2 LE", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.75}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.25}, {"label":"Win", "x":3, "y":4, "w":1.25}, {"label":"Alt", "x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4, "w":2.75}, {"x":8.25, "y":4, "w":1.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}] - }, - "LAYOUT_60_ansi": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - "LAYOUT_60_hhkb": { - "key_count": 60, - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, {"label":"2", "x":2, "y":0}, {"label":"3", "x":3, "y":0}, {"label":"4", "x":4, "y":0}, {"label":"5", "x":5, "y":0}, {"label":"6", "x":6, "y":0}, {"label":"7", "x":7, "y":0}, {"label":"8", "x":8, "y":0}, {"label":"9", "x":9, "y":0}, {"label":"0", "x":10, "y":0}, {"label":"-", "x":11, "y":0}, {"label":"=", "x":12, "y":0}, {"label":"\\", "x":13, "y":0}, {"label":"`", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"[", "x":11.5, "y":1}, {"label":"]", "x":12.5, "y":1}, {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, {"label":"Control", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":";", "x":10.75, "y":2}, {"label":"'", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":",", "x":9.25, "y":3}, {"label":".", "x":10.25, "y":3}, {"label":"/", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Os", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Os", "x":12.5, "y":4}] - } - } -} diff --git a/keyboards/exclusive/e6v2/le/keymaps/default/keymap.c b/keyboards/exclusive/e6v2/le/keymaps/default/keymap.c deleted file mode 100644 index b785a3279e..0000000000 --- a/keyboards/exclusive/e6v2/le/keymaps/default/keymap.c +++ /dev/null @@ -1,11 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, - KC_LCTL, KC_LGUI, KC_LALT, KC_MENU, KC_SPACE, KC_SPACE, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT - ), -};
\ No newline at end of file diff --git a/keyboards/exclusive/e6v2/le/keymaps/eric/keymap.c b/keyboards/exclusive/e6v2/le/keymaps/eric/keymap.c deleted file mode 100644 index 4d3052ef2c..0000000000 --- a/keyboards/exclusive/e6v2/le/keymaps/eric/keymap.c +++ /dev/null @@ -1,31 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /*rBase layer */ - [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, MO(1), - KC_LCTL, KC_LALT, KC_LGUI, KC_LGUI, KC_SPACE, KC_SPACE, KC_RGUI, KC_RGUI, KC_RALT, KC_RCTL, KC_RCTL - ), - - /* Function layer */ - [1] = LAYOUT( - KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_HOME, KC_AMPR, KC_TILD, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_UP, KC_DEL, KC_BSPC, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, KC_ASTR, KC_TRNS, KC_TRNS, KC_PGUP, KC_HOME, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_UNDS, KC_PLUS, KC_LPRN, KC_RPRN, KC_PIPE, KC_TRNS, KC_TRNS, KC_PGDN, KC_END, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(2), MO(2), KC_TRNS - ), - - /* Reset layer */ - [2] = LAYOUT( - RESET, KC_A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO - ), - -}; diff --git a/keyboards/exclusive/e6v2/le/keymaps/johu/keymap.c b/keyboards/exclusive/e6v2/le/keymaps/johu/keymap.c deleted file mode 100644 index 691f0e73cd..0000000000 --- a/keyboards/exclusive/e6v2/le/keymaps/johu/keymap.c +++ /dev/null @@ -1,98 +0,0 @@ -#include QMK_KEYBOARD_H - -#define _BL 0 -#define _FL 1 -#define _SL 2 -#define _CL 3 - -// Tap dance defines -#define CTL_ESC CTL_T(KC_ESC) // Tap for Esc, hold for Ctrl -#define HPR_TAB ALL_T(KC_TAB) // Tap for Tab, hold for Hyper (Super+Ctrl+Shift+Alt) -#define SFT_ENT SFT_T(KC_ENT) // Tap for Enter, hold for Shift -#define KC_SPFN LT(_SL, KC_SPC) // Tap for space, hold for function layer (aka SpaceFN) - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Layer 0: Base layer (Default layer) - * ,-----------------------------------------------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | - * |-----------------------------------------------------------------------------------------+ - * |Tab/Hyper| Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | - * |-----------------------------------------------------------------------------------------+ - * | Ctrl/Esc | A | S | D | F | G | H | J | K | L | ; | ' | Enter | - * |-----------------------------------------------------------------------------------------+ - * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift/Ent | FN | - * |-----------------------------------------------------------------------------------------+ - * |LGUI | LAlt | Space | RAlt |RGUI | - * `--------------------------------------------------------------------' - */ - [_BL] = LAYOUT_60_hhkb( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - HPR_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_ENT, MO(_FL), - KC_LGUI, KC_LALT, KC_SPFN, KC_RALT, KC_RGUI - ), - -/* Layer 1: FN Layer - * ,-----------------------------------------------------------------------------------------. - * | CL | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | | | | Psc | Slck| Paus| Up | | Del | - * |-----------------------------------------------------------------------------------------+ - * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | - * |-----------------------------------------------------------------------------------------+ - * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | - * |-----------------------------------------------------------------------------------------+ - * | | | | Stop | CL | - * `--------------------------------------------------------------------' - */ - [_FL] = LAYOUT_60_hhkb( - TG(_CL), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, KC_DEL, - _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, - _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, - _______, _______, _______, KC_MSTP, MO(_CL) - ), - -/* Layer 2: Space FN Layer -* ,-----------------------------------------------------------------------------------------. -* | CL | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | -* |-----------------------------------------------------------------------------------------+ -* | | | | | | | | PgUp| | PgDn| | | | Del | -* |-----------------------------------------------------------------------------------------+ -* | | Vol-| Vol+| Mute| | | Left| Down| Up |Right| | | | -* |-----------------------------------------------------------------------------------------+ -* | | Prev| Play| Next| | | Home| End | | | | | | -* |-----------------------------------------------------------------------------------------+ -* | | | | | CL | -* `--------------------------------------------------------------------' -*/ - [_SL] = LAYOUT_60_hhkb( - TG(_CL), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, KC_PGDN, _______, _______, _______, KC_DEL, - _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, - _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_END, _______, _______, _______, _______, _______, - _______, _______, _______, _______, MO(_CL) - ), - -/* Layer 3: Control Layer - * ,-----------------------------------------------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | BL- | BL+ | BL | | | | | | | | | | RESET | - * |-----------------------------------------------------------------------------------------+ - * | | RGBT| RGBM| | | | | | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | CAPS | Hue+| Hue-| Sat+| Sat-| Val+| Val-| | | | | | | - * |-----------------------------------------------------------------------------------------+ - * | | | | | | - * `--------------------------------------------------------------------' - */ - [_CL] = LAYOUT_60_hhkb( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, BL_TOGG, BL_STEP, BL_DEC, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - KC_CAPS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______ - ) -}; diff --git a/keyboards/exclusive/e6v2/le/keymaps/johu/readme.md b/keyboards/exclusive/e6v2/le/keymaps/johu/readme.md deleted file mode 100644 index 605a14a1c3..0000000000 --- a/keyboards/exclusive/e6v2/le/keymaps/johu/readme.md +++ /dev/null @@ -1,40 +0,0 @@ -# johu's E6-V2 Last Edition (LE) HHKB -Make example for this keyboard (after setting up your build environment): -```bash -$ make e6v2/le:johu -``` - -Or to make and flash: -```bash -$ make e6v2/le:johu:dfu -``` - -See the [build environment setup] and the [make instructions] for more -information. Brand new to QMK? Start with our [Complete Newbs Guide]. - -## Layer 0: Base Layer -* HHKB Qwerty layout plus some specials: - * The Space key sends `Space` when tapped, toggles to *Space FN Layer* when held - * [Grave Escape] - * The Ctrl key sends `Esc` when tapped, `Ctrl` when held - * The Tab key sends `Tab` when tapped, [Hyper] (`Super+Ctrl+Alt+Shift`) when held - * The right Shift key sends `Enter` when tapped, `Shift` when held - -## Layer 1: Function Layer -* Default HHKB function layer includig the iconic diamond arrow cluster -* Multimedia controls - -## Layer 2: Space FN Layer -* VIM style arrow cluster -* Multimedia controls - -## Layer 3: Control Layer -* Reset button -* RGB controls -* Caps Lock - -[build environment setup]: https://docs.qmk.fm/#/getting_started_build_tools -[make instructions]: https://docs.qmk.fm/#/getting_started_make_guide -[Complete Newbs Guide]: https://docs.qmk.fm/#/newbs -[Grave Escape]: https://beta.docs.qmk.fm/features/feature_grave_esc -[Hyper]: http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key diff --git a/keyboards/exclusive/e6v2/le/le.c b/keyboards/exclusive/e6v2/le/le.c deleted file mode 100644 index f27bdc113b..0000000000 --- a/keyboards/exclusive/e6v2/le/le.c +++ /dev/null @@ -1,33 +0,0 @@ -#include "le.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 7); - PORTB &= ~(1 << 7); - } else { - DDRB &= ~(1 << 7); - PORTB &= ~(1 << 7); - } -} - diff --git a/keyboards/exclusive/e6v2/le/le.h b/keyboards/exclusive/e6v2/le/le.h deleted file mode 100644 index d52560dfbe..0000000000 --- a/keyboards/exclusive/e6v2/le/le.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef LE_H -#define LE_H - -#include "quantum.h" - -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0D, \ - K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K42, K43, K44, K47, K49, K4A, K4B, K4C, K4D, K4E \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, KC_NO, K42, K43, K44, KC_NO, KC_NO, K47, KC_NO, K49, K4A, K4B, K4C, K4D, K4E }, \ -} - -#define LAYOUT_60_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ - K40, K42, K43, K47, K4A, K4B, K4D, K4E \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ - { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, KC_NO }, \ - { K40, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, K4A, K4B, KC_NO, K4D, K4E }, \ -} - -/* LAYOUT_60_hhkb - * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ - * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0e │0d │ - * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ - * │10 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │20 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ - * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3e │ - * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──────┬┴───┴┬───┬─┴───┤ - * │▓▓▓▓▓│42 │43 │47 (7u) │4b │4d │▓▓▓▓▓│ - * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ -*/ -#define LAYOUT_60_hhkb( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0D, \ - K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, \ - K42, K43, K47, K4B, K4D \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E }, \ - { KC_NO, KC_NO, K42, K43, KC_NO, KC_NO, KC_NO, K47, KC_NO, KC_NO, KC_NO, K4B, KC_NO, K4D, KC_NO }, \ -} - -#endif diff --git a/keyboards/exclusive/e6v2/le/readme.md b/keyboards/exclusive/e6v2/le/readme.md deleted file mode 100644 index b57bb01604..0000000000 --- a/keyboards/exclusive/e6v2/le/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# E6-V2 Last Edition (LE) - -These docs are for the QMK version of the E6-V2 PCB. [More info on qmk.fm](http://qmk.fm/) - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: E6-V2 LE Mid Port rev.qmk -Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) - -**Please do not flash LE firmware on OE hardware.** - -Make example for this keyboard (after setting up your build environment): - - make exclusive/e6v2/le:default - -Or to make and flash: - - make exclusive/e6v2/le:default:dfu - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/exclusive/e6v2/le/rules.mk b/keyboards/exclusive/e6v2/le/rules.mk deleted file mode 100644 index 7d28042d85..0000000000 --- a/keyboards/exclusive/e6v2/le/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 - -LAYOUTS = 60_ansi
\ No newline at end of file diff --git a/keyboards/exclusive/e6v2/oe/config.h b/keyboards/exclusive/e6v2/oe/config.h deleted file mode 100644 index 0bb89eba6d..0000000000 --- a/keyboards/exclusive/e6v2/oe/config.h +++ /dev/null @@ -1,59 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef CONFIG_H -#define CONFIG_H - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 -#define DEVICE_VER 0x0002 -#define MANUFACTURER Exclusive / E-Team -#define PRODUCT E6-V2 -#define DESCRIPTION E6-V2 QMK PCB (Mid-Port) - -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* QMK E6-V2 PCB default pin-out */ -#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } -#define MATRIX_COL_PINS { C7, C6, B5, B4, D7, D6, D4, F6, F7, F5, F4, F1, F0, B0, B1 } -#define UNUSED_PINS { E6, B2, B3, B7 } - -#define RGB_DI_PIN E2 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 8 -#define RGBLIGHT_HUE_STEP 12 -#define RGBLIGHT_SAT_STEP 12 -#define RGBLIGHT_VAL_STEP 12 -#endif - -#define BACKLIGHT_PIN B6 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 5 -#define BACKLIGHT_BREAHTING -#define BREATHING_PERIOD 3 -#endif - -#define DIODE_DIRECTION COL2ROW -#define DEBOUNCING_DELAY 5 - -#endif diff --git a/keyboards/exclusive/e6v2/oe/info.json b/keyboards/exclusive/e6v2/oe/info.json deleted file mode 100644 index 7c14017274..0000000000 --- a/keyboards/exclusive/e6v2/oe/info.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "keyboard_name": "E6-V2 OE", - "url": "", - "maintainer": "qmk", - "width": 15, - "height": 5, - "layouts": { - "LAYOUT": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"x":12.75, "y":2}, {"label":"Enter", "x":13.75, "y":2, "w":1.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_60_ansi": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] - }, - - "LAYOUT_hhkb": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}] - }, - - "LAYOUT_hhkb_splits": { - "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}] - } - } -} diff --git a/keyboards/exclusive/e6v2/oe/keymaps/amnesia0287/keymap.c b/keyboards/exclusive/e6v2/oe/keymaps/amnesia0287/keymap.c deleted file mode 100644 index 7e64b1212e..0000000000 --- a/keyboards/exclusive/e6v2/oe/keymaps/amnesia0287/keymap.c +++ /dev/null @@ -1,79 +0,0 @@ -#include QMK_KEYBOARD_H - -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _BL 0 -#define _HLa 1 -#define _HLb 2 -#define _HL 3 -#define _XL 4 - -enum hype_keycodes { - FN_HLa = SAFE_RANGE, - FN_HLb -}; - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BL] = LAYOUT_hhkb( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN_HLb, - KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, FN_HLa - ), - [_HLa] = LAYOUT_hhkb( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_CAPS, KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS - ), - [_HLb] = LAYOUT_hhkb( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - KC_CAPS, KC_TRNS, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS - ), - [_HL] = LAYOUT_hhkb( - RGB_TOG, RGB_M_P, RGB_RMOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, BL_BRTG, BL_OFF, BL_STEP, BL_ON, BL_DEC, BL_INC, LALT(KC_F4), - RESET, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_MPRV, KC_MNXT, KC_MPLY, KC_TRNS, KC_TRNS - ), -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case FN_HLa: - if (record->event.pressed) - { - layer_on(_HLa); - update_tri_layer(_HLa, _HLb, _HL); - } - else - { - layer_off(_HLa); - update_tri_layer(_HLa, _HLb, _HL); - } - return false; - break; - case FN_HLb: - if (record->event.pressed) - { - layer_on(_HLb); - update_tri_layer(_HLa, _HLb, _HL); - } - else - { - layer_off(_HLb); - update_tri_layer(_HLa, _HLb, _HL); - } - return false; - break; - } - return true; -} diff --git a/keyboards/exclusive/e6v2/oe/keymaps/amnesia0287/readme.md b/keyboards/exclusive/e6v2/oe/keymaps/amnesia0287/readme.md deleted file mode 100644 index 4cc97aef04..0000000000 --- a/keyboards/exclusive/e6v2/oe/keymaps/amnesia0287/readme.md +++ /dev/null @@ -1,8 +0,0 @@ -amnesia0287's Keymap -=== - -Keymap Maintainer: [amnesia0287](https://github.com/amnesia0287) - -Difference from base layout: Primarily the HHKB-ness - -Intended usage: Daily driver for programming diff --git a/keyboards/exclusive/e6v2/oe/keymaps/default/keymap.c b/keyboards/exclusive/e6v2/oe/keymaps/default/keymap.c deleted file mode 100644 index 945787f0dc..0000000000 --- a/keyboards/exclusive/e6v2/oe/keymaps/default/keymap.c +++ /dev/null @@ -1,18 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_ansi( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_MENU, KC_RCTL - ), - [1] = LAYOUT_60_ansi( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; diff --git a/keyboards/exclusive/e6v2/oe/keymaps/default/readme.md b/keyboards/exclusive/e6v2/oe/keymaps/default/readme.md deleted file mode 100644 index e726473646..0000000000 --- a/keyboards/exclusive/e6v2/oe/keymaps/default/readme.md +++ /dev/null @@ -1,8 +0,0 @@ -Default Keymap -=== - -Super simple default keymap with only a base layer. - -Keymap Maintainer: [amnesia0287](https://github.com/amnesia0287) - -Intended usage: This is mostly provided for testing before you build your own keymap and as a reference to a stock(ish) configuration diff --git a/keyboards/exclusive/e6v2/oe/oe.c b/keyboards/exclusive/e6v2/oe/oe.c deleted file mode 100644 index 10cd59f0c2..0000000000 --- a/keyboards/exclusive/e6v2/oe/oe.c +++ /dev/null @@ -1,53 +0,0 @@ -#include "oe.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - DDRB |= (1<<6); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output low - DDRB |= (1<<2); - PORTB &= ~(1<<2); - } else { - // Hi-Z - DDRB &= ~(1<<2); - PORTB &= ~(1<<2); - } - // DDRB |= (1<<7); - // DDRB |= (1<<1); - // DDRB |= (1<<3); - // DDRE |= (1<<6); - if (usb_led == 0){ - PORTB |= (1<<6); - // PORTB |= (1<<7); - // PORTB |= (1<<1); - // PORTB |= (1<<3); - // PORTE |= (1<<6); - } - else{ - PORTB &= ~(1<<6); - // PORTB &= ~(1<<7); - } - - led_set_user(usb_led); -} diff --git a/keyboards/exclusive/e6v2/oe/oe.h b/keyboards/exclusive/e6v2/oe/oe.h deleted file mode 100644 index 0746039fe7..0000000000 --- a/keyboards/exclusive/e6v2/oe/oe.h +++ /dev/null @@ -1,66 +0,0 @@ -#ifndef OE_H -#define OE_H - -#include "quantum.h" - -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \ -} - -#define LAYOUT_60_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, KC_NO }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \ -} - -#define LAYOUT_hhkb( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K41, K42, K46, K4B, K4C \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ - { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \ -} - -#define LAYOUT_hhkb_splits( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K41, K42, K46, K4B, K4C \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ - { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \ -} - -#endif diff --git a/keyboards/exclusive/e6v2/oe/readme.md b/keyboards/exclusive/e6v2/oe/readme.md deleted file mode 100644 index 9d5dd62615..0000000000 --- a/keyboards/exclusive/e6v2/oe/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# E6-V2 Original Edition (OE) - -These docs are for the QMK version of the E6-V2 PCB. [More info on qmk.fm](http://qmk.fm/) - -Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287) -Hardware Supported: E6-V2 OE Mid Port rev.qmk -Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) - -**Please do not flash OE firmware on LE hardware.** - -Make example for this keyboard (after setting up your build environment): - - make e6v2/oe:default - -Or to make and flash: - - make e6v2/oe:default:dfu - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
\ No newline at end of file diff --git a/keyboards/exclusive/e6v2/oe/rules.mk b/keyboards/exclusive/e6v2/oe/rules.mk deleted file mode 100644 index 7d28042d85..0000000000 --- a/keyboards/exclusive/e6v2/oe/rules.mk +++ /dev/null @@ -1,70 +0,0 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 - -LAYOUTS = 60_ansi
\ No newline at end of file diff --git a/keyboards/exclusive/e6v2/readme.md b/keyboards/exclusive/e6v2/readme.md deleted file mode 100644 index c09d1ccf1b..0000000000 --- a/keyboards/exclusive/e6v2/readme.md +++ /dev/null @@ -1,20 +0,0 @@ -# E6-V2 - -The E6-V2 is a 60% keyboard manufactured by Exclusive. - -### Round 1: -- ps2avrGB PCB and QMK powered PCB option (OE PCB) -- Center mount and side mount USB - -### Round 2 -- ps2avrGB PCB and QMK powered PCB option (LE PCB) -- Only center mount USB offered -- All brass option - -These docs are for the QMK version of the E6-V2 PCB. [More info on qmk.fm](http://qmk.fm/) - -The E6V2 has been available with either a bootmapper client or QMK powered PCB. During the second round, the QMK powered PCB was redesigned and used different ports and a different switch matrix. - -Please use the appropriate version when making your firmware. Flashing one in place of the other, can brick your PCB. Please be certain whether you have a OE or LE PCB. - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/exclusive/e7v1/config.h b/keyboards/exclusive/e7v1/config.h deleted file mode 100644 index eacb3ba312..0000000000 --- a/keyboards/exclusive/e7v1/config.h +++ /dev/null @@ -1,47 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x7050 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Exclusive / E-Team -#define PRODUCT E7-V1 -#define DESCRIPTION E7-V1 QMK PCB(LED) - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 16 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 } -#define MATRIX_COL_PINS { B6, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7, F1 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* number of backlight levels */ -#define BACKLIGHT_PIN B7 -#ifdef BACKLIGHT_PIN -#define BACKLIGHT_LEVELS 6 -#endif - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -#define RGB_DI_PIN E6 -#ifdef RGB_DI_PIN -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 20 -#define RGBLIGHT_HUE_STEP 8 -#define RGBLIGHT_SAT_STEP 8 -#define RGBLIGHT_VAL_STEP 8 -#endif diff --git a/keyboards/exclusive/e7v1/e7v1.c b/keyboards/exclusive/e7v1/e7v1.c deleted file mode 100644 index 381585e6cf..0000000000 --- a/keyboards/exclusive/e7v1/e7v1.c +++ /dev/null @@ -1,25 +0,0 @@ -#include "e7v1.h" - -void matrix_init_kb(void) { - setPinOutput(F0); - matrix_init_user(); -} - -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - writePinHigh(F0); - } else { - writePinLow(F0); - } - - led_set_user(usb_led); -} - diff --git a/keyboards/exclusive/e7v1/e7v1.h b/keyboards/exclusive/e7v1/e7v1.h deleted file mode 100644 index 2fc7acb3ba..0000000000 --- a/keyboards/exclusive/e7v1/e7v1.h +++ /dev/null @@ -1,103 +0,0 @@ -#pragma once - -#include "quantum.h" - -// layout with all the switches supported by the PCB -#define LAYOUT_all( \ - K000, K001, K002, K003, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \ - K500, K501, K502, K505, K510, K511, K512, K513, K514, K515 \ -) { \ - { K000, K001, K002, K003, KC_NO, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, KC_NO }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514, K515 } \ -} - -#define LAYOUT_75_ansi( \ - K000, K001, K002, K003, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \ - K500, K501, K502, K505, K510, K512, K513, K514, K515 \ -) { \ - { K000, K001, K002, K003, KC_NO, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, KC_NO }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, KC_NO, K512, K513, K514, K515 } \ -} - -// Ansi layout with a 7u space bar -#define LAYOUT_75_ansi_7u( \ - K000, K001, K002, K003, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \ - K500, K501, K505, K510, K512, K513, K514, K515 \ -) { \ - { K000, K001, K002, K003, KC_NO, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, KC_NO }, \ - { K500, K501, KC_NO, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, KC_NO, K512, K513, K514, K515 } \ -} - -// ANSI layout with split backspace -#define LAYOUT_75_ansi_splitbs( \ - K000, K001, K002, K003, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ - K400 , K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \ - K500, K501, K502, K505, K510, K512, K513, K514, K515 \ -) { \ - { K000, K001, K002, K003, KC_NO, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, KC_NO }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, KC_NO, K512, K513, K514, K515 } \ -} - -// ANSI layout with split backspace -#define LAYOUT_75_ansi_7u_splitbs( \ - K000, K001, K002, K003, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ - K400 , K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \ - K500, K501, K505, K510, K512, K513, K514, K515 \ -) { \ - { K000, K001, K002, K003, KC_NO, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO }, \ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, KC_NO }, \ - { K500, K501, KC_NO, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, KC_NO, K512, K513, K514, K515 } \ -} - -#define LAYOUT_75_iso( \ - K000, K001, K002, K003, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K214, K313, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, \ - K500, K501, K502, K505, K510, K512, K513, K514, K515 \ -) { \ - { K000, K001, K002, K003, KC_NO, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, KC_NO }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, KC_NO, KC_NO, KC_NO, KC_NO, K510, KC_NO, K512, K513, K514, K515 } \ -} diff --git a/keyboards/exclusive/e7v1/info.json b/keyboards/exclusive/e7v1/info.json deleted file mode 100644 index e675e661fa..0000000000 --- a/keyboards/exclusive/e7v1/info.json +++ /dev/null @@ -1,25 +0,0 @@ -{ - "keyboard_name": "E7-V1", - "url": "", - "maintainer": "masterzen", - "width": 16.25, - "height": 6.5, - "layouts": { - "LAYOUT_all": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"x":13, "y":1.5}, {"label":"Backspace", "x":14, "y":1.5}, {"label":"Page Up", "x":15.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"\\", "x":13.5, "y":2.5, "w":1.5}, {"label":"Page down", "x":15.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"Z", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":4.75}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5}, {"label":"Win", "x":11, "y":5.5}, {"x":12, "y":5.5}, {"label":"\u2190", "x":13.25, "y":5.75}, {"label":"\u2193", "x":14.25, "y":5.75}, {"label":"\u2192", "x":15.25, "y":5.75}] - }, - "LAYOUT_75_ansi": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Page Up", "x":15.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"\\", "x":13.5, "y":2.5, "w":1.5}, {"label":"Page down", "x":15.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":4.75}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.5}, {"label":"Win", "x":11.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":13.25, "y":5.75}, {"label":"\u2193", "x":14.25, "y":5.75}, {"label":"\u2192", "x":15.25, "y":5.75}] - }, - "LAYOUT_75_ansi_7u": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"|", "x":13, "y":1.5, "w":2}, {"label":"Page Up", "x":15.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Backspace", "x":13.5, "y":2.5, "w":1.5}, {"label":"Page down", "x":15.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":4.75}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, {"label":"Win", "x":1.5, "y":5.5, "w":1.5}, {"x":3, "y":5.5, "w":7}, {"label":"Alt", "x":10, "y":5.5, "w":1.5}, {"label":"Win", "x":11.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":13.25, "y":5.75}, {"label":"\u2193", "x":14.25, "y":5.75}, {"label":"\u2192", "x":15.25, "y":5.75}] }, - "LAYOUT_75_ansi_7u_splitbs": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"|", "x":13, "y":1.5}, {"label":"Del", "x":14, "y":1.5}, {"label":"Page Up", "x":15.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Backspace", "x":13.5, "y":2.5, "w":1.5}, {"label":"Page down", "x":15.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":4.75}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, {"label":"Win", "x":1.5, "y":5.5, "w":1.5}, {"x":3, "y":5.5, "w":7}, {"label":"Alt", "x":10, "y":5.5, "w":1.5}, {"label":"Win", "x":11.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":13.25, "y":5.75}, {"label":"\u2193", "x":14.25, "y":5.75}, {"label":"\u2192", "x":15.25, "y":5.75}] - }, - "LAYOUT_75_iso": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Page Up", "x":15.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Page down", "x":15.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"Z", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":4.75}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.5}, {"label":"Win", "x":11.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":13.25, "y":5.75}, {"label":"\u2193", "x":14.25, "y":5.75}, {"label":"\u2192", "x":15.25, "y":5.75}]}, - "LAYOUT_75_ansi_splitbs": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.25, "y":0}, {"label":"F2", "x":2.25, "y":0}, {"label":"F3", "x":3.25, "y":0}, {"label":"F4", "x":4.25, "y":0}, {"label":"F5", "x":5.5, "y":0}, {"label":"F6", "x":6.5, "y":0}, {"label":"F7", "x":7.5, "y":0}, {"label":"F8", "x":8.5, "y":0}, {"label":"F9", "x":9.75, "y":0}, {"label":"F10", "x":10.75, "y":0}, {"label":"F11", "x":11.75, "y":0}, {"label":"F12", "x":12.75, "y":0}, {"label":"Home", "x":14, "y":0}, {"label":"End", "x":15.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"|", "x":13, "y":1.5}, {"label":"Del", "x":14, "y":1.5}, {"label":"Page Up", "x":15.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Backspace", "x":13.5, "y":2.5, "w":1.5}, {"label":"Page down", "x":15.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"label":"\u2191", "x":14.25, "y":4.75}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.5}, {"label":"Win", "x":11.5, "y":5.5, "w":1.5}, {"label":"\u2190", "x":13.25, "y":5.75}, {"label":"\u2193", "x":14.25, "y":5.75}, {"label":"\u2192", "x":15.25, "y":5.75}] - } - } -} diff --git a/keyboards/exclusive/e7v1/keymaps/ansi_splitbs/keymap.c b/keyboards/exclusive/e7v1/keymaps/ansi_splitbs/keymap.c deleted file mode 100644 index 242020b20a..0000000000 --- a/keyboards/exclusive/e7v1/keymaps/ansi_splitbs/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -#include QMK_KEYBOARD_H - -/* - * ,---------------------------------------------------------------------| - * |Esc|▓|F1 |F2 |F3 |F4 |▓|F5 |F6 |F7 |F8 |▓|F9 |F10|F11|F12|▓|Ins|▓|Del| - * |---------------------------------------------------------------------| - * |` |1 |2 |3 |4 |5 |6 |7 |8 |9 |0 |- |= |\ |Del|▓PgU | - * |---------------------------------------------------------------------| - * |Tab |Q |W |E |R |T |Y |U |I |O |P |[ | ] | BSpc|▓PgDn| - * |---------------------------------------------------------------------| - * |Caps |A |S |D |F |G |H |J |K |L |; |' | Enter |▓▓▓▓▓▓▓| - * |---------------------------------------------------------------------| - * |Shft |Z |X |C |V |B |N |M |, |. |/ |Shift |▓| Up |▓▓| - * |---------------------------------------------------------------------| - * |Ctrl|GUI |Alt | Space |Alt |Fn |▓|Lt |Dn |Rt | - * `---------------------------------------------------------------------|' - */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_75_ansi_splitbs( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS,KC_DEL, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), - - [1] = LAYOUT_75_ansi_splitbs( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - BL_TOGG, BL_DEC, BL_INC, KC_LGUI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, - _______, _______, _______, _______, _______, MO(1), RGB_MOD, RGB_VAD, RGB_HUD), - - -}; diff --git a/keyboards/exclusive/e7v1/keymaps/ansi_splitbs/readme.md b/keyboards/exclusive/e7v1/keymaps/ansi_splitbs/readme.md deleted file mode 100644 index be9f4c312e..0000000000 --- a/keyboards/exclusive/e7v1/keymaps/ansi_splitbs/readme.md +++ /dev/null @@ -1,5 +0,0 @@ -# ANSI split backspace Keymap - -Split backspace ANSI keymap with a base layer and an adjust layer. - -Keymap Maintainer: [masterzen](https://github.com/amnesia0287) diff --git a/keyboards/exclusive/e7v1/keymaps/default/keymap.c b/keyboards/exclusive/e7v1/keymaps/default/keymap.c deleted file mode 100644 index 189c01eca2..0000000000 --- a/keyboards/exclusive/e7v1/keymaps/default/keymap.c +++ /dev/null @@ -1,37 +0,0 @@ -#include QMK_KEYBOARD_H - -/* - * ,---------------------------------------------------------------------| - * |Esc|▓|F1 |F2 |F3 |F4 |▓|F5 |F6 |F7 |F8 |▓|F9 |F10|F11|F12|▓|Ins|▓|Del| - * |---------------------------------------------------------------------| - * |` |1 |2 |3 |4 |5 |6 |7 |8 |9 |0 |- |= |Backspace|▓PgU | - * |---------------------------------------------------------------------| - * |Tab |Q |W |E |R |T |Y |U |I |O |P |[ | ] | \ |▓PgDn| - * |---------------------------------------------------------------------| - * |Caps |A |S |D |F |G |H |J |K |L |; |' | Enter |▓▓▓▓▓▓▓| - * |---------------------------------------------------------------------| - * |Shft |Z |X |C |V |B |N |M |, |. |/ |Shift |▓| Up |▓▓| - * |---------------------------------------------------------------------| - * |Ctrl|GUI |Alt | Space |Alt |Fn |▓|Lt |Dn |Rt | - * `---------------------------------------------------------------------|' - */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_75_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), - - [1] = LAYOUT_75_ansi( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - BL_TOGG, BL_DEC, BL_INC, KC_LGUI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, - _______, _______, _______, _______, _______, MO(1), RGB_MOD, RGB_VAD, RGB_HUD), - - -}; diff --git a/keyboards/exclusive/e7v1/keymaps/default/readme.md b/keyboards/exclusive/e7v1/keymaps/default/readme.md deleted file mode 100644 index a6fc70a6aa..0000000000 --- a/keyboards/exclusive/e7v1/keymaps/default/readme.md +++ /dev/null @@ -1,5 +0,0 @@ -# Default Keymap - -Default ANSI keymap with a base layer and an adjust layer. - -Keymap Maintainer: [masterzen](https://github.com/amnesia0287) diff --git a/keyboards/exclusive/e7v1/keymaps/masterzen/keymap.c b/keyboards/exclusive/e7v1/keymaps/masterzen/keymap.c deleted file mode 100644 index 61a41f629c..0000000000 --- a/keyboards/exclusive/e7v1/keymaps/masterzen/keymap.c +++ /dev/null @@ -1,138 +0,0 @@ -#include QMK_KEYBOARD_H - -enum layers { - BASE, // qwerty linux - OSX, // qwerty osx - - _ADJUST, // function key layer -}; - -enum keycodes { - // default layout switcher - LAY_LIN = SAFE_RANGE, - LAY_OSX -}; - -/* - * ,---------------------------------------------------------------------| - * |Esc|▓|F1 |F2 |F3 |F4 |▓|F5 |F6 |F7 |F8 |▓|F9 |F10|F11|F12|▓|Hom|▓|End| - * |---------------------------------------------------------------------| - * |` |1 |2 |3 |4 |5 |6 |7 |8 |9 |0 |- |= |\ |Del|▓PgU | - * |---------------------------------------------------------------------| - * |Tab |Q |W |E |R |T |Y |U |I |O |P |[ | ] | BSpc|▓PgDn| - * |---------------------------------------------------------------------| - * |LCTRL |A |S |D |F |G |H |J |K |L |; |' | Enter |▓▓▓▓▓▓▓| - * |---------------------------------------------------------------------| - * |Shft |Z |X |C |V |B |N |M |, |. |/ |Shift |▓| Up |▓▓| - * |---------------------------------------------------------------------| - * |Ctrl|GUI |Alt | Space |Alt |Fn |▓|Lt |Dn |Rt | - * `---------------------------------------------------------------------|' - */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT_75_ansi_splitbs( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, LT(_ADJUST,KC_END), - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS,KC_DEL, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT), - - [OSX] = LAYOUT_75_ansi_splitbs( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - KC_LCTL, KC_LALT, KC_LGUI, _______, KC_LGUI, KC_RALT, _______, _______, _______), - - [_ADJUST] = LAYOUT_75_ansi_splitbs( - RESET, LAY_LIN, LAY_OSX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO(_ADJUST), - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - BL_TOGG, BL_DEC, BL_INC, KC_LGUI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, - _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_VAD, RGB_HUD), - - -}; - -extern rgblight_config_t rgblight_config; - -bool edit = false; -uint32_t mode; -uint16_t hue; -uint8_t sat; -uint8_t val; - -void matrix_init_user(void) -{ - mode = rgblight_config.mode; -} - - -void persistent_default_layer_set(uint16_t default_layer) -{ - eeconfig_update_default_layer(default_layer); - default_layer_set(default_layer); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) -{ - switch (keycode) - { - /* layout switcher */ - case LAY_LIN: - if (record->event.pressed) - { - persistent_default_layer_set(1UL << BASE); - } - return false; - break; - case LAY_OSX: - if (record->event.pressed) - { - persistent_default_layer_set(1UL << OSX); - } - return false; - break; - case RGB_MOD: - // allows to set the rgb mode while in the ADJUST layer which uses - // its own mode - if (record->event.pressed) - { - rgblight_mode(mode); - rgblight_step(); - mode = rgblight_config.mode; - } - return false; - break; - } - return true; -} - -uint32_t layer_state_set_user(uint32_t state) -{ - if (state == BASE && edit == true) - { - hue = rgblight_get_hue(); - sat = rgblight_get_sat(); - val = rgblight_get_val(); - edit = false; - } - - switch (biton32(state)) - { - case _ADJUST: - mode = rgblight_get_mode(); - rgblight_mode_noeeprom(1); - rgblight_setrgb(0xD3, 0x7F, 0xED); - edit = true; - break; - default: - rgblight_mode(mode); - rgblight_sethsv(hue, sat, val); - break; - } - return state; -} diff --git a/keyboards/exclusive/e7v1/keymaps/masterzen/readme.md b/keyboards/exclusive/e7v1/keymaps/masterzen/readme.md deleted file mode 100644 index ee4f2a531f..0000000000 --- a/keyboards/exclusive/e7v1/keymaps/masterzen/readme.md +++ /dev/null @@ -1,14 +0,0 @@ -# masterzen's Keymap - - - -Keymap Maintainer: [masterzen](https://github.com/masterzen) - - -Difference from base layout: - * split backspace - * Home & End on last keys of row 0 instead of Insert/Del - * Fn is on the End key when hold - * supports both a windows/linux keymap and osx keymap - * layer change is reflected in the rgb leds of the logo - diff --git a/keyboards/exclusive/e7v1/readme.md b/keyboards/exclusive/e7v1/readme.md deleted file mode 100644 index 9d1b8538b4..0000000000 --- a/keyboards/exclusive/e7v1/readme.md +++ /dev/null @@ -1,15 +0,0 @@ -# E7-V1 - - - -A 75% keyboard made by Exclusive and run in a Geekhack group buy. - -Keyboard Maintainer: [masterzen](https://github.com/masterzen) -Hardware Supported: E7 - V1 QMK PCB LED -Hardware Availability: [https://geekhack.org/index.php?topic=97182.msg2654226#msg2654226](https://geekhack.org/index.php?topic=97182.msg2654226#msg2654226) - -Make example for this keyboard (after setting up your build environment): - - make exclusive/e7v1:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/exclusive/e7v1/rules.mk b/keyboards/exclusive/e7v1/rules.mk deleted file mode 100644 index f903df7de5..0000000000 --- a/keyboards/exclusive/e7v1/rules.mk +++ /dev/null @@ -1,54 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - -# Bootloader selection -BOOTLOADER = atmel-dfu - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes diff --git a/keyboards/exclusive/readme.md b/keyboards/exclusive/readme.md deleted file mode 100644 index 85409c9236..0000000000 --- a/keyboards/exclusive/readme.md +++ /dev/null @@ -1,9 +0,0 @@ -# Exclusive Firmware - -All files related to firmware of keyboards designed by Exclusive. - -## Keyboards - -* [e6_rgb](./e6_rgb/): maintainer [astro](https://github.com/yulei) -* [e6-v2](./e6v2/): maintainers [MechMerlin](https://github.com/mechmerlin), [amnesia0287](https://github.com/amnesia0287) -* [e7-v1](./e7v1): maintainer [masterzen](https://github.com/masterzen) |