diff options
Diffstat (limited to 'keyboards/edi')
-rw-r--r-- | keyboards/edi/standaside/config.h | 104 | ||||
-rw-r--r-- | keyboards/edi/standaside/info.json | 78 | ||||
-rw-r--r-- | keyboards/edi/standaside/keymaps/default/keymap.c | 77 | ||||
-rw-r--r-- | keyboards/edi/standaside/readme.md | 15 | ||||
-rw-r--r-- | keyboards/edi/standaside/rules.mk | 18 | ||||
-rw-r--r-- | keyboards/edi/standaside/standaside.c | 1 | ||||
-rw-r--r-- | keyboards/edi/standaside/standaside.h | 23 |
7 files changed, 316 insertions, 0 deletions
diff --git a/keyboards/edi/standaside/config.h b/keyboards/edi/standaside/config.h new file mode 100644 index 0000000000..797a463a15 --- /dev/null +++ b/keyboards/edi/standaside/config.h @@ -0,0 +1,104 @@ + + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xF7E0 +#define PRODUCT_ID 0x0412 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Fate Everywhere +#define PRODUCT Stand Aside + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D1, F4, F6, F7, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { F5, D0, D4, C6, D7, E6, B4, B5 } +#define UNUSED_PINS {} + + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN C7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Enable RGB Underlighting + */ +#define RGB_DI_PIN C7 +#define RGBLED_NUM 12 +#define RGBLIGHT_ANIMATIONS + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + diff --git a/keyboards/edi/standaside/info.json b/keyboards/edi/standaside/info.json new file mode 100644 index 0000000000..797a3419b7 --- /dev/null +++ b/keyboards/edi/standaside/info.json @@ -0,0 +1,78 @@ +{ + "keyboard_name": "Stand Aside", + "url": "", + "maintainer": "fateeverywhere", + "layouts": { + "LAYOUT_ortho_4x16": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + {"x":15, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":4, "y":1}, + {"x":5, "y":1}, + {"x":6, "y":1}, + {"x":7, "y":1}, + {"x":8, "y":1}, + {"x":9, "y":1}, + {"x":10, "y":1}, + {"x":11, "y":1}, + {"x":12, "y":1}, + {"x":13, "y":1}, + {"x":14, "y":1}, + {"x":15, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4, "y":2}, + {"x":5, "y":2}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":10, "y":2}, + {"x":11, "y":2}, + {"x":12, "y":2}, + {"x":13, "y":2}, + {"x":14, "y":2}, + {"x":15, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4, "y":3}, + {"x":5, "y":3}, + {"x":6, "y":3}, + {"x":7, "y":3}, + {"x":8, "y":3}, + {"x":9, "y":3}, + {"x":10, "y":3}, + {"x":11, "y":3}, + {"x":12, "y":3}, + {"x":13, "y":3}, + {"x":14, "y":3}, + {"x":15, "y":3} + ] + } + } +} diff --git a/keyboards/edi/standaside/keymaps/default/keymap.c b/keyboards/edi/standaside/keymaps/default/keymap.c new file mode 100644 index 0000000000..0f13cb7632 --- /dev/null +++ b/keyboards/edi/standaside/keymaps/default/keymap.c @@ -0,0 +1,77 @@ + +#include QMK_KEYBOARD_H + +#define _MAIN 0 +#define _RAISE 1 +#define _LOWER 2 + +// Readability keycodes +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + +/* MAIN + * .-----------------------------------------------------------------------------------------------------------------------------------------------. + * | TAB | Q | W | E | R | T | Y | U | I | O | P | Backsp | Delete | 7 | 8 | 9 | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | ESC | A | S | D | F | G | H | J | K | L | ; | ' | PgUp | 4 | 5 | 6 | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | SHIFT | Z | X | C | V | B | N | M | , | . | / | ENTER | PgDn | 1 | 2 | 3 | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | LCTRL | PAUS | GUI | ALT | Lower | Space | Space | Raise | Left | Down | Up | Right | Shift | 0 | . | ENTER | + * '-----------------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_MAIN] = LAYOUT_ortho_4x16( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_DEL, KC_KP_7, KC_KP_8, KC_KP_9, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_PGUP, KC_KP_4, KC_KP_5, KC_KP_6, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, KC_PGDN, KC_KP_1, KC_KP_2, KC_KP_3, + KC_LCTL, KC_PAUS, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RSFT, KC_KP_0, KC_KP_DOT, KC_PENT + ), + +/* RAISE + * .-----------------------------------------------------------------------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | Insert | | | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | | | | | - | = | [ | ] | \ | Home | | | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | | | | | | | | | PScr | End | | | | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | | | | | Next | Vol- | Vol+ | Play | NumLok | | | | + * '-----------------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_RAISE] = LAYOUT_ortho_4x16( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, KC_INS, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_END, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY, KC_NLCK, _______, _______, _______ + ), + +/* LOWER + * .-----------------------------------------------------------------------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | | | RGBPWR | Mode | Reset | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | | HUE+ | SAT+ | VAL+ | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | | HUE- | SAT- | VAL- | + * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + * | | | | | | | | | | | Mute | | Plain | Rainbo | Larsen | + * '-----------------------------------------------------------------------------------------------------------------------------------------------' + */ + + [_LOWER] = LAYOUT_ortho_4x16( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, RGB_TOG, RGB_MOD, RESET, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, _______, RGB_HUI, RGB_SAI, RGB_VAI, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, RGB_M_P, RGB_M_R, RGB_M_K + ), + +}; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +}
\ No newline at end of file diff --git a/keyboards/edi/standaside/readme.md b/keyboards/edi/standaside/readme.md new file mode 100644 index 0000000000..51911c877d --- /dev/null +++ b/keyboards/edi/standaside/readme.md @@ -0,0 +1,15 @@ +# Stand Aside + +![Stand Aside](https://i.imgur.com/X6Katar.png) + +A compact 60% keyboard designed by Fate Everywhere. Born out of the desire for a Planck with a numpad for technical work. Available for sale (kit and completed) once the store comes up. + +Keyboard Maintainer: [Fate Everywhere](https://github.com/fateeverywhere) +Hardware Supported: Mark 3 Stand Aside. +Hardware Availability: Seven Store (https://store.7storm.org). + +Make example for this keyboard (after setting up your build environment): + + make edi/standaside:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/edi/standaside/rules.mk b/keyboards/edi/standaside/rules.mk new file mode 100644 index 0000000000..8e4bcc5f9b --- /dev/null +++ b/keyboards/edi/standaside/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = yes # Enable RGB underlighting support diff --git a/keyboards/edi/standaside/standaside.c b/keyboards/edi/standaside/standaside.c new file mode 100644 index 0000000000..9f445ec044 --- /dev/null +++ b/keyboards/edi/standaside/standaside.c @@ -0,0 +1 @@ +#include "standaside.h" diff --git a/keyboards/edi/standaside/standaside.h b/keyboards/edi/standaside/standaside.h new file mode 100644 index 0000000000..9601f1257c --- /dev/null +++ b/keyboards/edi/standaside/standaside.h @@ -0,0 +1,23 @@ +#pragma once + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_ortho_4x16( \ + k00, k10, k01, k11, k02, k12, k03, k13, k04, k14, k05, k15, k06, k16, k07, k17, \ + k20, k30, k21, k31, k22, k32, k23, k33, k24, k34, k25, k35, k26, k36, k27, k37, \ + k40, k50, k41, k51, k42, k52, k43, k53, k44, k54, k45, k55, k46, k56, k47, k57, \ + k60, k70, k61, k71, k62, k72, k63, k73, k64, k74, k65, k75, k66, k76, k67, k77 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, k43, k44, k45, k46, k47 }, \ + { k50, k51, k52, k53, k54, k55, k56, k57 }, \ + { k60, k61, k62, k63, k64, k65, k66, k67 }, \ + { k70, k71, k72, k73, k74, k75, k76, k77 } \ +} |