diff options
Diffstat (limited to 'keyboards/dztech')
25 files changed, 2771 insertions, 8 deletions
diff --git a/keyboards/dztech/dz40rgb/bootloader_defs.h b/keyboards/dztech/dz40rgb/bootloader_defs.h new file mode 100644 index 0000000000..3b0e9d20a6 --- /dev/null +++ b/keyboards/dztech/dz40rgb/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/keyboards/dztech/dz40rgb/chconf.h b/keyboards/dztech/dz40rgb/chconf.h new file mode 100644 index 0000000000..1d9f12ff1f --- /dev/null +++ b/keyboards/dztech/dz40rgb/chconf.h @@ -0,0 +1,520 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/dztech/dz40rgb/config.h b/keyboards/dztech/dz40rgb/config.h new file mode 100644 index 0000000000..2ac7fbdc87 --- /dev/null +++ b/keyboards/dztech/dz40rgb/config.h @@ -0,0 +1,34 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1220 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH +#define PRODUCT DZ40RGB +#define DESCRIPTION DZ40 ARM RGB keyboard +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +#define MATRIX_ROW_PINS { B13, B12, A2, A1 } +#define MATRIX_COL_PINS {A6, A7, B0, B1, C15, C14, C13, B9, B8, A8, B14, B15 } + +/* #define UNUSED_PINS {A0,A1,A2, A3,A4,A9,A10,C15,A13,A14,B2}*/ + +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 3 +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +#define RGB_MATRIX_SKIP_FRAMES 0 +#define RGB_MATRIX_KEYPRESSES +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_MULTISPLASH +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#define DRIVER_ADDR_1 0b1010000 +#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. + +#define DRIVER_COUNT 2 + diff --git a/keyboards/dztech/dz40rgb/dz40rgb.c b/keyboards/dztech/dz40rgb/dz40rgb.c new file mode 100644 index 0000000000..b1a03760f8 --- /dev/null +++ b/keyboards/dztech/dz40rgb/dz40rgb.c @@ -0,0 +1,297 @@ +#include "dz40rgb.h" +#include "config.h" +#if defined (split_space) +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + + {0, K_13, J_13, L_13}, + {0, K_14, J_14, L_14}, + + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + + {0, H_13, G_13, I_13}, + {0, H_14, G_14, I_14}, + + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + + {0, E_13, D_13, F_13}, + {0, E_14, D_14, F_14}, + + {0, B_12, A_12, C_12}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_7, A_7, C_7}, + {0, B_6, A_6, C_6}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1} + +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + + {{0|(11<<4)}, {20.36*11, 0}, 1}, + {{0|(10<<4)}, {20.36*10, 0}, 1}, + {{0|(9<<4)}, {20.36*9, 0}, 1}, + {{0|(8<<4)}, {20.36*8, 0}, 1}, + {{0|(7<<4)}, {20.36*7, 0}, 1}, + {{0|(6<<4)}, { 20.36*6, 0}, 1}, + {{0|(5<<4)}, { 20.36*5, 0}, 1}, + {{0|(4<<4)}, { 20.36*4, 0}, 1}, + {{0|(3<<4)}, { 20.36*3, 0}, 1}, + {{0|(2<<4)}, { 20.36*2, 0}, 1}, + {{0|(1<<4)}, { 20.36*1, 0}, 1}, + {{0|(0<<4)}, { 20.36*0, 0}, 1}, + + {{0|(12<<4)}, {20.36*11, 21.33*0.5}, 1}, + {{0|(13<<4)}, {20.36*0,21.33*0.5}, 1}, + + {{1|(11<<4)}, {20.36*11, 21.33}, 1}, + {{1|(10<<4)}, {20.36*10, 21.33}, 0}, + {{1|(9<<4)}, {20.36*9, 21.33}, 0}, + {{1|(8<<4)}, {20.36*8, 21.33}, 0}, + {{1|(7<<4)}, {20.36*7, 21.33}, 0}, + {{1|(6<<4)}, { 20.36*6, 21.33}, 0}, + {{1|(5<<4)}, { 20.36*5, 21.33}, 0}, + {{1|(4<<4)}, { 20.36*4, 21.33}, 0}, + {{1|(3<<4)}, { 20.36*3, 21.33}, 0}, + {{1|(2<<4)}, { 20.36*2, 21.33}, 0}, + {{1|(1<<4)}, { 20.36*1, 21.33}, 0}, + {{1|(0<<4)}, { 20.36*0, 21.33}, 1}, + + {{1|(12<<4)}, {20.36*11, 21.33*1.5}, 1}, + {{1|(13<<4)}, {20.36*0,21.33*1.5}, 1}, + + {{2|(11<<4)}, {20.36*11, 21.33*2}, 1}, + {{2|(10<<4)}, {20.36*10, 21.33*2}, 0}, + {{2|(9<<4)}, {20.36*9, 21.33*2}, 0}, + {{2|(8<<4)}, {20.36*8, 21.33*2}, 0}, + {{2|(7<<4)}, {20.36*7, 21.33*2}, 0}, + {{2|(6<<4)}, { 20.36*6, 21.33*2}, 0}, + {{2|(5<<4)}, { 20.36*5, 21.33*2}, 0}, + {{2|(4<<4)}, { 20.36*4, 21.33*2}, 0}, + {{2|(3<<4)}, { 20.36*3, 21.33*2}, 0}, + {{2|(2<<4)}, { 20.36*2, 21.33*2}, 0}, + {{2|(1<<4)}, { 20.36*1, 21.33*2}, 0}, + {{2|(0<<4)}, { 20.36*0, 21.33*2}, 1}, + + {{2|(12<<4)}, {20.36*11, 21.33*2.5}, 1}, + {{2|(13<<4)}, {20.36*0,21.33*2.5}, 1}, + + {{3|(11<<4)}, {20.36*11, 21.33*3}, 1}, + {{3|(10<<4)}, {20.36*10, 21.33*3}, 1}, + {{3|(9<<4)}, {20.36*9, 21.33*3}, 1}, + {{3|(8<<4)}, {20.36*8, 21.33*3}, 1}, + {{3|(7<<4)}, {20.36*7, 21.33*3}, 1}, + {{3|(6<<4)}, { 20.36*6, 21.33*3}, 1}, + {{3|(5<<4)}, { 20.36*5, 21.33*3}, 1}, + {{3|(4<<4)}, { 20.36*4, 21.33*3}, 1}, + {{3|(3<<4)}, { 20.36*3, 21.33*3}, 1}, + {{3|(2<<4)}, { 20.36*2, 21.33*3}, 1}, + {{3|(1<<4)}, { 20.36*1, 21.33*3}, 1}, + {{3|(0<<4)}, { 20.36*0, 21.33*3}, 1} + +}; +#else +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + + {0, K_13, J_13, L_13}, + {0, K_14, J_14, L_14}, + + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + + {0, H_13, G_13, I_13}, + {0, H_14, G_14, I_14}, + + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + + {0, E_13, D_13, F_13}, + {0, E_14, D_14, F_14}, + + {0, B_12, A_12, C_12}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_13, A_13, C_13}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1} + +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + + {{0|(11<<4)}, {20.36*11, 0}, 1}, + {{0|(10<<4)}, {20.36*10, 0}, 1}, + {{0|(9<<4)}, {20.36*9, 0}, 1}, + {{0|(8<<4)}, {20.36*8, 0}, 1}, + {{0|(7<<4)}, {20.36*7, 0}, 1}, + {{0|(6<<4)}, { 20.36*6, 0}, 1}, + {{0|(5<<4)}, { 20.36*5, 0}, 1}, + {{0|(4<<4)}, { 20.36*4, 0}, 1}, + {{0|(3<<4)}, { 20.36*3, 0}, 1}, + {{0|(2<<4)}, { 20.36*2, 0}, 1}, + {{0|(1<<4)}, { 20.36*1, 0}, 1}, + {{0|(0<<4)}, { 20.36*0, 0}, 1}, + + {{0|(12<<4)}, {20.36*11, 21.33*0.5}, 1}, + {{0|(13<<4)}, {20.36*0,21.33*0.5}, 1}, + + {{1|(11<<4)}, {20.36*11, 21.33}, 1}, + {{1|(10<<4)}, {20.36*10, 21.33}, 0}, + {{1|(9<<4)}, {20.36*9, 21.33}, 0}, + {{1|(8<<4)}, {20.36*8, 21.33}, 0}, + {{1|(7<<4)}, {20.36*7, 21.33}, 0}, + {{1|(6<<4)}, { 20.36*6, 21.33}, 0}, + {{1|(5<<4)}, { 20.36*5, 21.33}, 0}, + {{1|(4<<4)}, { 20.36*4, 21.33}, 0}, + {{1|(3<<4)}, { 20.36*3, 21.33}, 0}, + {{1|(2<<4)}, { 20.36*2, 21.33}, 0}, + {{1|(1<<4)}, { 20.36*1, 21.33}, 0}, + {{1|(0<<4)}, { 20.36*0, 21.33}, 1}, + + {{1|(12<<4)}, {20.36*11, 21.33*1.5}, 1}, + {{1|(13<<4)}, {20.36*0,21.33*1.5}, 1}, + + {{2|(11<<4)}, {20.36*11, 21.33*2}, 1}, + {{2|(10<<4)}, {20.36*10, 21.33*2}, 0}, + {{2|(9<<4)}, {20.36*9, 21.33*2}, 0}, + {{2|(8<<4)}, {20.36*8, 21.33*2}, 0}, + {{2|(7<<4)}, {20.36*7, 21.33*2}, 0}, + {{2|(6<<4)}, { 20.36*6, 21.33*2}, 0}, + {{2|(5<<4)}, { 20.36*5, 21.33*2}, 0}, + {{2|(4<<4)}, { 20.36*4, 21.33*2}, 0}, + {{2|(3<<4)}, { 20.36*3, 21.33*2}, 0}, + {{2|(2<<4)}, { 20.36*2, 21.33*2}, 0}, + {{2|(1<<4)}, { 20.36*1, 21.33*2}, 0}, + {{2|(0<<4)}, { 20.36*0, 21.33*2}, 1}, + + {{2|(12<<4)}, {20.36*11, 21.33*2.5}, 1}, + {{2|(13<<4)}, {20.36*0,21.33*2.5}, 1}, + + {{3|(11<<4)}, {20.36*11, 21.33*3}, 1}, + {{3|(10<<4)}, {20.36*10, 21.33*3}, 1}, + {{3|(9<<4)}, {20.36*9, 21.33*3}, 1}, + {{3|(8<<4)}, {20.36*8, 21.33*3}, 1}, + {{3|(7<<4)}, {20.36*7, 21.33*3}, 1}, + {{3|(6<<4)}, { 20.36*5.5, 21.33*3}, 1}, + {{3|(4<<4)}, { 20.36*4, 21.33*3}, 1}, + {{3|(3<<4)}, { 20.36*3, 21.33*3}, 1}, + {{3|(2<<4)}, { 20.36*2, 21.33*3}, 1}, + {{3|(1<<4)}, { 20.36*1, 21.33*3}, 1}, + {{3|(0<<4)}, { 20.36*0, 21.33*3}, 1} + +}; +#endif + + +void matrix_init_kb(void) { + matrix_init_user(); +} + + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + return process_record_user(keycode, record); +} + + +void suspend_power_down_kb(void) +{ + rgb_matrix_set_suspend_state(true); +} + +void suspend_wakeup_init_kb(void) +{ + rgb_matrix_set_suspend_state(false); +} diff --git a/keyboards/dztech/dz40rgb/dz40rgb.h b/keyboards/dztech/dz40rgb/dz40rgb.h new file mode 100644 index 0000000000..5f88a6225a --- /dev/null +++ b/keyboards/dztech/dz40rgb/dz40rgb.h @@ -0,0 +1,27 @@ +#pragma once +#include "quantum.h" +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k36, k36, k37, k38, k39, k3a, k3b } \ +} + +#define LAYOUT_SPLIT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ +} diff --git a/keyboards/dztech/dz40rgb/halconf.h b/keyboards/dztech/dz40rgb/halconf.h new file mode 100644 index 0000000000..eda293c49b --- /dev/null +++ b/keyboards/dztech/dz40rgb/halconf.h @@ -0,0 +1,388 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/dztech/dz40rgb/keymaps/default/config.h b/keyboards/dztech/dz40rgb/keymaps/default/config.h new file mode 100644 index 0000000000..30bf11ed5d --- /dev/null +++ b/keyboards/dztech/dz40rgb/keymaps/default/config.h @@ -0,0 +1,3 @@ +#pragma once +#define DRIVER_1_LED_TOTAL 53 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz40rgb/keymaps/default/keymap.c b/keyboards/dztech/dz40rgb/keymaps/default/keymap.c new file mode 100644 index 0000000000..6ea7421c92 --- /dev/null +++ b/keyboards/dztech/dz40rgb/keymaps/default/keymap.c @@ -0,0 +1,75 @@ +#include QMK_KEYBOARD_H +extern bool g_suspend_state; +#define _LAYER0 0 +#define _LAYER1 1 +#define _LAYER2 2 +#define _LAYER3 3 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT( /* Base */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + [_LAYER1] = LAYOUT( /* FN */ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, TO(3), KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + [_LAYER2] = LAYOUT( /* FN2 */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, + RGB_TOG, RGB_MOD, BL_INC, BL_DEC, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + [_LAYER3] = LAYOUT( /* FN3 */ + TO(0), RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; +void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { + rgb_led led; + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + led = g_rgb_leds[i]; + if (led.matrix_co.raw < 0xFF) { + if (led.modifier) { + rgb_matrix_set_color( i, red, green, blue ); + } + } + } +} + +void rgb_matrix_indicators_user(void) { + if (!g_suspend_state) { + switch (biton32(layer_state)) { + case _LAYER1: + rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; + case _LAYER2: + rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; + case _LAYER3: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; + } + } + +} + + + + + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; + } + diff --git a/keyboards/dztech/dz40rgb/keymaps/split_space/config.h b/keyboards/dztech/dz40rgb/keymaps/split_space/config.h new file mode 100644 index 0000000000..4f35bef373 --- /dev/null +++ b/keyboards/dztech/dz40rgb/keymaps/split_space/config.h @@ -0,0 +1,5 @@ +#pragma once +#include "../../config.h" +#define split_space +#define DRIVER_1_LED_TOTAL 54 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c b/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c new file mode 100644 index 0000000000..bbbe5a8f0c --- /dev/null +++ b/keyboards/dztech/dz40rgb/keymaps/split_space/keymap.c @@ -0,0 +1,102 @@ +#include QMK_KEYBOARD_H +extern bool g_suspend_state; +#define _LAYER0 0 +#define _LAYER1 1 +#define _LAYER2 2 +#define _LAYER3 3 +#define _LAYER4 4 +#define _LAYER5 5 +#define _LAYER6 6 +#define _LAYER7 7 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT_SPLIT( /* Base */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + [_LAYER1] = LAYOUT_SPLIT( /* FN */ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY), + [_LAYER2] = LAYOUT_SPLIT( /* LIGHT */ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY), + [_LAYER3] = LAYOUT_SPLIT( /* NUMPAD */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + [_LAYER4] = LAYOUT_SPLIT( /* MAC */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + [_LAYER5] = LAYOUT_SPLIT( /* NEED TO DEFINE */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + [_LAYER6] = LAYOUT_SPLIT( /* NEED TO DEFINE */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + [_LAYER7] = LAYOUT_SPLIT( /* NEED TO DEFINE */ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + RGB_MOD, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + }; + + + + +void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { + rgb_led led; + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + led = g_rgb_leds[i]; + if (led.matrix_co.raw < 0xFF) { + if (led.modifier) { + rgb_matrix_set_color( i, red, green, blue ); + } + } + } +} + +void rgb_matrix_indicators_user(void) { + if (!g_suspend_state) { + switch (biton32(layer_state)) { + case _LAYER1: + rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; + case _LAYER2: + rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; + case _LAYER4: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; + case _LAYER5: + rgb_matrix_layer_helper(0x00, 0xFF, 0xFF, false); break; + case _LAYER6: + rgb_matrix_layer_helper(0xFF, 0xFF, 0xFF, false); break; + } + } + +} + + + + + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; + } + diff --git a/keyboards/dztech/dz40rgb/mcuconf.h b/keyboards/dztech/dz40rgb/mcuconf.h new file mode 100644 index 0000000000..226da48d59 --- /dev/null +++ b/keyboards/dztech/dz40rgb/mcuconf.h @@ -0,0 +1,257 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +#undef STM32_HSE_BYPASS +// #error "oh no" +// #endif + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/dztech/dz40rgb/rules.mk b/keyboards/dztech/dz40rgb/rules.mk new file mode 100644 index 0000000000..99cbafb8cc --- /dev/null +++ b/keyboards/dztech/dz40rgb/rules.mk @@ -0,0 +1,57 @@ +# project specific files + +## chip/board settings +# the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F3xx + +# Linker script to use +# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +MCU_LDSCRIPT = STM32F303xC + +# Startup code to use +# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f3xx + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +BOARD = GENERIC_STM32_F303XC + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 +OPT_DEFS = + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DNO_SUSPEND_POWER_DOWN + +# Options to pass to dfu-util when flashing +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave + +# Build Options +# comment out to disable the options. +# +BACKLIGHT_ENABLE = no +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = no # USB Nkey Rollover +AUDIO_ENABLE = no +RGB_MATRIX_ENABLE = IS31FL3733 # Use RGB matrix +NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in66666666666666666666666666 diff --git a/keyboards/dztech/dz60rgb/config.h b/keyboards/dztech/dz60rgb/config.h index 167b67a87d..814cb6520f 100644 --- a/keyboards/dztech/dz60rgb/config.h +++ b/keyboards/dztech/dz60rgb/config.h @@ -6,7 +6,8 @@ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x1219 #define DEVICE_VER 0x0001 -#define MANUFACTURER DOU +#define MANUFACTURER DZTECH + #define PRODUCT DZ60RGB #define DESCRIPTION DZ60 ARM RGB keyboard #define MATRIX_ROWS 5 @@ -20,7 +21,6 @@ #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 3 - #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended #define RGB_MATRIX_SKIP_FRAMES 0 @@ -30,7 +30,5 @@ #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH #define DRIVER_ADDR_1 0b1010000 #define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons. - #define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 63 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + diff --git a/keyboards/dztech/dz60rgb/dz60rgb.c b/keyboards/dztech/dz60rgb/dz60rgb.c index 4a4893b8e4..99e3b5646f 100644 --- a/keyboards/dztech/dz60rgb/dz60rgb.c +++ b/keyboards/dztech/dz60rgb/dz60rgb.c @@ -1,4 +1,587 @@ #include "dz60rgb.h" +#include "config.h" +#if defined (dzrgb60_iso) + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, K_14, J_14, L_14}, + {0, K_13, J_13, L_13}, + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + + {0, H_15, G_15, I_15}, + {0, H_13, G_13, I_13}, + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + + {0, B_14, A_14, C_14}, + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + + {0, B_13, A_13, C_13}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_7, A_7, C_7}, + {0, B_6, A_6, C_6}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1}, + + {0, B_15, A_15, C_15}, + {0, E_13, D_13, F_13}, + {0, B_12, A_12, C_12}, + {0, E_15, D_15, F_15}, + {0, B_16, A_16, C_16}, + {0, E_16, D_16, F_16}, + {0, H_16, G_16, I_16}, + {0, K_16, J_16, L_16} +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + {{0|(13<<4)}, {16*13.5, 0}, 1}, + {{0|(12<<4)}, {16*12, 0}, 1}, + {{0|(11<<4)}, {16*11, 0}, 1}, + {{0|(10<<4)}, {16*10, 0}, 1}, + {{0|(9<<4)}, {16*9, 0}, 1}, + {{0|(8<<4)}, {16*8, 0}, 1}, + {{0|(7<<4)}, {16*7, 0}, 1}, + {{0|(6<<4)}, {16*6, 0}, 1}, + {{0|(5<<4)}, {16*5, 0}, 1}, + {{0|(4<<4)}, {16*4, 0}, 1}, + {{0|(3<<4)}, {16*3, 0}, 1}, + {{0|(2<<4)}, {16*2, 0}, 1}, + {{0|(1<<4)}, {16*1, 0}, 1}, + {{0|(0<<4)}, {16*0, 0}, 1}, + + {{2|(13<<4)}, {16*13.75, 24}, 1}, + {{1|(12<<4)}, {16*12.5, 16}, 0}, + {{1|(11<<4)}, {16*11.5, 16}, 0}, + {{1|(10<<4)}, {16*10.5, 16}, 0}, + {{1|(9<<4)}, { 16*9.5, 16}, 0}, + {{1|(8<<4)}, { 16*8.5, 16}, 0}, + {{1|(7<<4)}, { 16*7.5, 16}, 0}, + {{1|(6<<4)}, { 16*6.5, 16}, 0}, + {{1|(5<<4)}, { 16*5.5, 16}, 0}, + {{1|(4<<4)}, { 16*4.5, 16}, 0}, + {{1|(3<<4)}, { 16*3.5, 16}, 0}, + {{1|(2<<4)}, { 16*2.5, 16}, 0}, + {{1|(1<<4)}, { 16*1.5, 16}, 0}, + {{1|(0<<4)}, { 16*0.25, 16}, 1}, + + {{1|(13<<4)}, {16*12.75, 32}, 1}, + {{2|(11<<4)}, {16*11.75, 32}, 0}, + {{2|(10<<4)}, {16*10.75, 32}, 0}, + {{2|(9<<4)}, {16*9.75, 32}, 0}, + {{2|(8<<4)}, {16*8.75, 32}, 0}, + {{2|(7<<4)}, {16*7.75, 32}, 0}, + {{2|(6<<4)}, { 16*6.75, 32}, 0}, + {{2|(5<<4)}, { 16*5.75, 32}, 0}, + {{2|(4<<4)}, { 16*4.75, 32}, 0}, + {{2|(3<<4)}, { 16*3.75, 32}, 0}, + {{2|(2<<4)}, { 16*2.75, 32}, 0}, + {{2|(1<<4)}, { 16*1.75, 32}, 0}, + {{2|(0<<4)}, { 16*0.375, 32}, 1}, + + {{3|(11<<4)}, {16*13.125, 48}, 1}, + {{3|(10<<4)}, {16*11.25, 48}, 0}, + {{3|(9<<4)}, {16*10.25, 48}, 0}, + {{3|(8<<4)}, {16*9.25, 48}, 0}, + {{3|(7<<4)}, {16*8.25, 48}, 0}, + {{3|(6<<4)}, {16*7.25, 48}, 0}, + {{3|(5<<4)}, {16*6.25, 48}, 0}, + {{3|(4<<4)}, {16*5.25, 48}, 0}, + {{3|(3<<4)}, {16*4.25, 48}, 0}, + {{3|(2<<4)}, {16*3.25, 48}, 0}, + {{3|(1<<4)}, {16*1.25, 48}, 0}, + {{3|(0<<4)}, {16*0.625, 48}, 1}, + + {{4|(13<<4)}, {16*13.875, 64}, 1}, + {{4|(11<<4)}, {16*12.625, 64}, 1}, + {{4|(10<<4)}, {16*11.375, 64}, 1}, + {{4|(9<<4)}, {16*10.125, 64}, 1}, + {{4|(5<<4)}, { 16*6.375, 64}, 0}, + {{4|(2<<4)}, { 16*2.625, 64}, 1}, + {{4|(1<<4)}, { 16*1.375, 64}, 1}, + {{4|(0<<4)}, { 16*0.125, 64}, 1} + +}; + + + +#elif defined (dzrgb60_hhkb) + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, H_15, G_15, I_15}, + {0, K_14, J_14, L_14}, + {0, K_13, J_13, L_13}, + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + + {0, H_14, G_14, I_14}, + {0, H_13, G_13, I_13}, + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + + {0, E_14, D_14, F_14}, + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + + {0, B_14, A_14, C_14}, + {0, B_13, A_13, C_13}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_7, A_7, C_7}, + {0, B_6, A_6, C_6}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1}, + + {0, B_15, A_15, C_15}, + {0, E_13, D_13, F_13}, + {0, B_12, A_12, C_12}, + {0, B_16, A_16, C_16}, + {0, E_16, D_16, F_16}, + {0, H_16, G_16, I_16}, + {0, K_16, J_16, L_16} +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + {{2|(12<<4)}, {16*14, 0}, 1}, + {{0|(13<<4)}, {16*13, 0}, 1}, + {{0|(12<<4)}, {16*12, 0}, 1}, + {{0|(11<<4)}, {16*11, 0}, 1}, + {{0|(10<<4)}, {16*10, 0}, 1}, + {{0|(9<<4)}, {16*9, 0}, 1}, + {{0|(8<<4)}, {16*8, 0}, 1}, + {{0|(7<<4)}, {16*7, 0}, 1}, + {{0|(6<<4)}, {16*6, 0}, 1}, + {{0|(5<<4)}, {16*5, 0}, 1}, + {{0|(4<<4)}, {16*4, 0}, 1}, + {{0|(3<<4)}, {16*3, 0}, 1}, + {{0|(2<<4)}, {16*2, 0}, 1}, + {{0|(1<<4)}, {16*1, 0}, 1}, + {{0|(0<<4)}, {16*0, 0}, 1}, + + {{1|(13<<4)}, {16*13.75, 16}, 1}, + {{1|(12<<4)}, {16*12.5, 16}, 0}, + {{1|(11<<4)}, {16*11.5, 16}, 0}, + {{1|(10<<4)}, {16*10.5, 16}, 0}, + {{1|(9<<4)}, { 16*9.5, 16}, 0}, + {{1|(8<<4)}, { 16*8.5, 16}, 0}, + {{1|(7<<4)}, { 16*7.5, 16}, 0}, + {{1|(6<<4)}, { 16*6.5, 16}, 0}, + {{1|(5<<4)}, { 16*5.5, 16}, 0}, + {{1|(4<<4)}, { 16*4.5, 16}, 0}, + {{1|(3<<4)}, { 16*3.5, 16}, 0}, + {{1|(2<<4)}, { 16*2.5, 16}, 0}, + {{1|(1<<4)}, { 16*1.5, 16}, 0}, + {{1|(0<<4)}, { 16*0.25, 16}, 1}, + + {{2|(13<<4)}, {16*12.75, 32}, 1}, + {{2|(11<<4)}, {16*11.75, 32}, 0}, + {{2|(10<<4)}, {16*10.75, 32}, 0}, + {{2|(9<<4)}, {16*9.75, 32}, 0}, + {{2|(8<<4)}, {16*8.75, 32}, 0}, + {{2|(7<<4)}, {16*7.75, 32}, 0}, + {{2|(6<<4)}, { 16*6.75, 32}, 0}, + {{2|(5<<4)}, { 16*5.75, 32}, 0}, + {{2|(4<<4)}, { 16*4.75, 32}, 0}, + {{2|(3<<4)}, { 16*3.75, 32}, 0}, + {{2|(2<<4)}, { 16*2.75, 32}, 0}, + {{2|(1<<4)}, { 16*1.75, 32}, 0}, + {{2|(0<<4)}, { 16*0.375, 32}, 1}, + + {{3|(13<<4)}, {16*14, 48}, 1}, + {{3|(11<<4)}, {16*12.625, 48}, 0}, + {{3|(10<<4)}, {16*11.25, 48}, 0}, + {{3|(9<<4)}, {16*10.25, 48}, 0}, + {{3|(8<<4)}, {16*9.25, 48}, 0}, + {{3|(7<<4)}, {16*8.25, 48}, 0}, + {{3|(6<<4)}, {16*7.25, 48}, 0}, + {{3|(5<<4)}, {16*6.25, 48}, 0}, + {{3|(4<<4)}, {16*5.25, 48}, 0}, + {{3|(3<<4)}, {16*4.25, 48}, 0}, + {{3|(2<<4)}, {16*3.25, 48}, 0}, + {{3|(1<<4)}, {16*1.25, 48}, 0}, + {{3|(0<<4)}, {16*0.625, 48}, 1}, + + {{4|(13<<4)}, {16*13.625, 64}, 1}, + {{4|(11<<4)}, {16*12.375, 64}, 1}, + {{4|(10<<4)}, {16*11.125, 64}, 1}, + {{4|(5<<4)}, { 16*7, 64}, 0}, + {{4|(2<<4)}, { 16*2.875, 64}, 1}, + {{4|(1<<4)}, { 16*1.625, 64}, 1}, + {{4|(0<<4)}, { 16*0.375, 64}, 1} + +}; +#elif defined (dzrgb60_hhkb_iso) +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, H_15, G_15, I_15}, + {0, K_14, J_14, L_14}, + {0, K_13, J_13, L_13}, + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + + {0, K_15, J_15, L_15}, + {0, H_13, G_13, I_13}, + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + + {0, E_15, D_15, F_15}, + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + + {0, B_14, A_14, C_14}, + {0, B_13, A_13, C_13}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_7, A_7, C_7}, + {0, B_6, A_6, C_6}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1}, + + {0, B_15, A_15, C_15}, + {0, E_13, D_13, F_13}, + {0, B_12, A_12, C_12}, + {0, B_16, A_16, C_16}, + {0, E_16, D_16, F_16}, + {0, H_16, G_16, I_16}, + {0, K_16, J_16, L_16} +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + {{2|(12<<4)}, {16*14, 0}, 1}, + {{0|(13<<4)}, {16*13, 0}, 1}, + {{0|(12<<4)}, {16*12, 0}, 1}, + {{0|(11<<4)}, {16*11, 0}, 1}, + {{0|(10<<4)}, {16*10, 0}, 1}, + {{0|(9<<4)}, {16*9, 0}, 1}, + {{0|(8<<4)}, {16*8, 0}, 1}, + {{0|(7<<4)}, {16*7, 0}, 1}, + {{0|(6<<4)}, {16*6, 0}, 1}, + {{0|(5<<4)}, {16*5, 0}, 1}, + {{0|(4<<4)}, {16*4, 0}, 1}, + {{0|(3<<4)}, {16*3, 0}, 1}, + {{0|(2<<4)}, {16*2, 0}, 1}, + {{0|(1<<4)}, {16*1, 0}, 1}, + {{0|(0<<4)}, {16*0, 0}, 1}, + + {{2|(13<<4)}, {16*13.75, 24}, 1}, + {{1|(12<<4)}, {16*12.5, 16}, 0}, + {{1|(11<<4)}, {16*11.5, 16}, 0}, + {{1|(10<<4)}, {16*10.5, 16}, 0}, + {{1|(9<<4)}, { 16*9.5, 16}, 0}, + {{1|(8<<4)}, { 16*8.5, 16}, 0}, + {{1|(7<<4)}, { 16*7.5, 16}, 0}, + {{1|(6<<4)}, { 16*6.5, 16}, 0}, + {{1|(5<<4)}, { 16*5.5, 16}, 0}, + {{1|(4<<4)}, { 16*4.5, 16}, 0}, + {{1|(3<<4)}, { 16*3.5, 16}, 0}, + {{1|(2<<4)}, { 16*2.5, 16}, 0}, + {{1|(1<<4)}, { 16*1.5, 16}, 0}, + {{1|(0<<4)}, { 16*0.25, 16}, 1}, + + {{1|(13<<4)}, {16*12.75, 32}, 1}, + {{2|(11<<4)}, {16*11.75, 32}, 0}, + {{2|(10<<4)}, {16*10.75, 32}, 0}, + {{2|(9<<4)}, {16*9.75, 32}, 0}, + {{2|(8<<4)}, {16*8.75, 32}, 0}, + {{2|(7<<4)}, {16*7.75, 32}, 0}, + {{2|(6<<4)}, { 16*6.75, 32}, 0}, + {{2|(5<<4)}, { 16*5.75, 32}, 0}, + {{2|(4<<4)}, { 16*4.75, 32}, 0}, + {{2|(3<<4)}, { 16*3.75, 32}, 0}, + {{2|(2<<4)}, { 16*2.75, 32}, 0}, + {{2|(1<<4)}, { 16*1.75, 32}, 0}, + {{2|(0<<4)}, { 16*0.375, 32}, 1}, + + {{3|(13<<4)}, {16*14, 48}, 1}, + {{3|(11<<4)}, {16*12.625, 48}, 0}, + {{3|(10<<4)}, {16*11.25, 48}, 0}, + {{3|(9<<4)}, {16*10.25, 48}, 0}, + {{3|(8<<4)}, {16*9.25, 48}, 0}, + {{3|(7<<4)}, {16*8.25, 48}, 0}, + {{3|(6<<4)}, {16*7.25, 48}, 0}, + {{3|(5<<4)}, {16*6.25, 48}, 0}, + {{3|(4<<4)}, {16*5.25, 48}, 0}, + {{3|(3<<4)}, {16*4.25, 48}, 0}, + {{3|(2<<4)}, {16*3.25, 48}, 0}, + {{3|(1<<4)}, {16*1.25, 48}, 0}, + {{3|(0<<4)}, {16*0.625, 48}, 1}, + + {{4|(13<<4)}, {16*13.625, 64}, 1}, + {{4|(11<<4)}, {16*12.375, 64}, 1}, + {{4|(10<<4)}, {16*11.125, 64}, 1}, + {{4|(5<<4)}, { 16*7, 64}, 0}, + {{4|(2<<4)}, { 16*2.875, 64}, 1}, + {{4|(1<<4)}, { 16*1.625, 64}, 1}, + {{4|(0<<4)}, { 16*0.375, 64}, 1} + +}; +#elif defined (dzrgb60_ansi) +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, K_14, J_14, L_14}, + {0, K_13, J_13, L_13}, + {0, K_12, J_12, L_12}, + {0, K_11, J_11, L_11}, + {0, K_10, J_10, L_10}, + {0, K_9, J_9, L_9}, + {0, K_8, J_8, L_8}, + {0, K_7, J_7, L_7}, + {0, K_6, J_6, L_6}, + {0, K_5, J_5, L_5}, + {0, K_4, J_4, L_4}, + {0, K_3, J_3, L_3}, + {0, K_2, J_2, L_2}, + {0, K_1, J_1, L_1}, + + {0, H_14, G_14, I_14}, + {0, H_13, G_13, I_13}, + {0, H_12, G_12, I_12}, + {0, H_11, G_11, I_11}, + {0, H_10, G_10, I_10}, + {0, H_9, G_9, I_9}, + {0, H_8, G_8, I_8}, + {0, H_7, G_7, I_7}, + {0, H_6, G_6, I_6}, + {0, H_5, G_5, I_5}, + {0, H_4, G_4, I_4}, + {0, H_3, G_3, I_3}, + {0, H_2, G_2, I_2}, + {0, H_1, G_1, I_1}, + + {0, E_14, D_14, F_14}, + {0, E_12, D_12, F_12}, + {0, E_11, D_11, F_11}, + {0, E_10, D_10, F_10}, + {0, E_9, D_9, F_9}, + {0, E_8, D_8, F_8}, + {0, E_7, D_7, F_7}, + {0, E_6, D_6, F_6}, + {0, E_5, D_5, F_5}, + {0, E_4, D_4, F_4}, + {0, E_3, D_3, F_3}, + {0, E_2, D_2, F_2}, + {0, E_1, D_1, F_1}, + + {0, B_13, A_13, C_13}, + {0, B_11, A_11, C_11}, + {0, B_10, A_10, C_10}, + {0, B_9, A_9, C_9}, + {0, B_8, A_8, C_8}, + {0, B_7, A_7, C_7}, + {0, B_6, A_6, C_6}, + {0, B_5, A_5, C_5}, + {0, B_4, A_4, C_4}, + {0, B_3, A_3, C_3}, + {0, B_2, A_2, C_2}, + {0, B_1, A_1, C_1}, + + {0, B_15, A_15, C_15}, + {0, E_13, D_13, F_13}, + {0, B_12, A_12, C_12}, + {0, E_15, D_15, F_15}, + {0, B_16, A_16, C_16}, + {0, E_16, D_16, F_16}, + {0, H_16, G_16, I_16}, + {0, K_16, J_16, L_16} +}; + +const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { + {{0|(13<<4)}, {16*13.5, 0}, 1}, + {{0|(12<<4)}, {16*12, 0}, 1}, + {{0|(11<<4)}, {16*11, 0}, 1}, + {{0|(10<<4)}, {16*10, 0}, 1}, + {{0|(9<<4)}, {16*9, 0}, 1}, + {{0|(8<<4)}, {16*8, 0}, 1}, + {{0|(7<<4)}, {16*7, 0}, 1}, + {{0|(6<<4)}, {16*6, 0}, 1}, + {{0|(5<<4)}, {16*5, 0}, 1}, + {{0|(4<<4)}, {16*4, 0}, 1}, + {{0|(3<<4)}, {16*3, 0}, 1}, + {{0|(2<<4)}, {16*2, 0}, 1}, + {{0|(1<<4)}, {16*1, 0}, 1}, + {{0|(0<<4)}, {16*0, 0}, 1}, + + {{1|(13<<4)}, {16*13.75, 16}, 1}, + {{1|(12<<4)}, {16*12.5, 16}, 0}, + {{1|(11<<4)}, {16*11.5, 16}, 0}, + {{1|(10<<4)}, {16*10.5, 16}, 0}, + {{1|(9<<4)}, { 16*9.5, 16}, 0}, + {{1|(8<<4)}, { 16*8.5, 16}, 0}, + {{1|(7<<4)}, { 16*7.5, 16}, 0}, + {{1|(6<<4)}, { 16*6.5, 16}, 0}, + {{1|(5<<4)}, { 16*5.5, 16}, 0}, + {{1|(4<<4)}, { 16*4.5, 16}, 0}, + {{1|(3<<4)}, { 16*3.5, 16}, 0}, + {{1|(2<<4)}, { 16*2.5, 16}, 0}, + {{1|(1<<4)}, { 16*1.5, 16}, 0}, + {{1|(0<<4)}, { 16*0.25, 16}, 1}, + + {{2|(13<<4)}, {16*13.375, 24}, 1}, + {{2|(11<<4)}, {16*11.75, 32}, 0}, + {{2|(10<<4)}, {16*10.75, 32}, 0}, + {{2|(9<<4)}, {16*9.75, 32}, 0}, + {{2|(8<<4)}, {16*8.75, 32}, 0}, + {{2|(7<<4)}, {16*7.75, 32}, 0}, + {{2|(6<<4)}, { 16*6.75, 32}, 0}, + {{2|(5<<4)}, { 16*5.75, 32}, 0}, + {{2|(4<<4)}, { 16*4.75, 32}, 0}, + {{2|(3<<4)}, { 16*3.75, 32}, 0}, + {{2|(2<<4)}, { 16*2.75, 32}, 0}, + {{2|(1<<4)}, { 16*1.75, 32}, 0}, + {{2|(0<<4)}, { 16*0.375, 32}, 1}, + + {{3|(11<<4)}, {16*13.125, 48}, 1}, + {{3|(10<<4)}, {16*11.25, 48}, 0}, + {{3|(9<<4)}, {16*10.25, 48}, 0}, + {{3|(8<<4)}, {16*9.25, 48}, 0}, + {{3|(7<<4)}, {16*8.25, 48}, 0}, + {{3|(6<<4)}, {16*7.25, 48}, 0}, + {{3|(5<<4)}, {16*6.25, 48}, 0}, + {{3|(4<<4)}, {16*5.25, 48}, 0}, + {{3|(3<<4)}, {16*4.25, 48}, 0}, + {{3|(2<<4)}, {16*3.25, 48}, 0}, + {{3|(1<<4)}, {16*1.25, 48}, 0}, + {{3|(0<<4)}, {16*0.625, 48}, 1}, + + {{4|(13<<4)}, {16*13.875, 64}, 1}, + {{4|(11<<4)}, {16*12.625, 64}, 1}, + {{4|(10<<4)}, {16*11.375, 64}, 1}, + {{4|(9<<4)}, {16*10.125, 64}, 1}, + {{4|(5<<4)}, { 16*6.375, 64}, 0}, + {{4|(2<<4)}, { 16*2.625, 64}, 1}, + {{4|(1<<4)}, { 16*1.375, 64}, 1}, + {{4|(0<<4)}, { 16*0.125, 64}, 1} +}; +#else + const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver @@ -72,7 +655,7 @@ const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_16, A_16, C_16}, {0, E_16, D_16, F_16}, {0, H_16, G_16, I_16}, - {0, K_16, J_16, L_16}, + {0, K_16, J_16, L_16} }; const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { @@ -142,9 +725,10 @@ const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = { {{4|(5<<4)}, { 17.23*5, 64}, 0}, {{4|(2<<4)}, { 17.23*2, 64}, 1}, {{4|(1<<4)}, { 17.23*1, 64}, 1}, - {{4|(0<<4)}, { 17.23*0, 64}, 1}, + {{4|(0<<4)}, { 17.23*0, 64}, 1} }; +#endif void matrix_init_kb(void) { matrix_init_user(); diff --git a/keyboards/dztech/dz60rgb/dz60rgb.h b/keyboards/dztech/dz60rgb/dz60rgb.h index a029933f1f..1884ddfb0b 100644 --- a/keyboards/dztech/dz60rgb/dz60rgb.h +++ b/keyboards/dztech/dz60rgb/dz60rgb.h @@ -1,6 +1,7 @@ #pragma once #define XXX KC_NO #include "quantum.h" + #define LAYOUT( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ @@ -14,3 +15,58 @@ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ { K40, K41, K42, XXX, XXX, K45, XXX, XXX, K48, K49, K4A, K4B, XXX, K4D } \ } +#define LAYOUT_ISO( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ + K40, K41, K42, K45, K49, K4A, K4B, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, XXX }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, XXX, K4D } \ +} + +#define LAYOUT_HHKB( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D,\ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,\ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D,\ + K40, K41, K42, K45, K4A, K4B, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D}, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, K4B, XXX, K4D } \ +} + +#define LAYOUT_HHKB_ISO( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K45, K4A, K4B, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D,}, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, K4B, XXX, K4D } \ +} + +#define LAYOUT_ANSI( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ + K40, K41, K42, K45, K49, K4A, K4B, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, XXX }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, XXX, K4D } \ +} diff --git a/keyboards/dztech/dz60rgb/keymaps/ansi/config.h b/keyboards/dztech/dz60rgb/keymaps/ansi/config.h new file mode 100644 index 0000000000..2e7122b3cc --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/ansi/config.h @@ -0,0 +1,4 @@ +#pragma once +#define dzrgb60_ansi +#define DRIVER_1_LED_TOTAL 61 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c b/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c new file mode 100644 index 0000000000..fcdf29e4ee --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/ansi/keymap.c @@ -0,0 +1,83 @@ +#include QMK_KEYBOARD_H +extern bool g_suspend_state; +#define _LAYER0 0 +#define _LAYER1 1 +#define _LAYER2 2 +#define _LAYER3 3 +#define _LAYER4 4 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT_ANSI( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(2), KC_RCTL), + [_LAYER1] = LAYOUT_ANSI( /* FN */ + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, \ + KC_TRNS, KC_TRNS, KC_TRNS, TO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER2] = LAYOUT_ANSI( /* FN2 */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER3] = LAYOUT_ANSI( /* FN3 */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_TRNS,MO(4), KC_RALT, KC_RCTL), + [_LAYER4] = LAYOUT_ANSI( /* FN4 */ + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_HOME, KC_PGUP, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, \ + KC_TRNS, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + }; + +void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { + rgb_led led; + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + led = g_rgb_leds[i]; + if (led.matrix_co.raw < 0xFF) { + if (led.modifier) { + rgb_matrix_set_color( i, red, green, blue ); + } + } + } +} + +void rgb_matrix_indicators_user(void) { + uint8_t this_led = host_keyboard_leds(); + if (!g_suspend_state) { + switch (biton32(layer_state)) { + case _LAYER1: + rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; + case _LAYER2: + rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; + case _LAYER3: + rgb_matrix_layer_helper(0x00, 0x00, 0xFF, false); break; + case _LAYER4: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; + } + } + if ( this_led & (1<<USB_LED_CAPS_LOCK)) { + rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); + } + +} + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; + } diff --git a/keyboards/dztech/dz60rgb/keymaps/default/config.h b/keyboards/dztech/dz60rgb/keymaps/default/config.h new file mode 100644 index 0000000000..558b6023d5 --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/default/config.h @@ -0,0 +1,3 @@ +#pragma once +#define DRIVER_1_LED_TOTAL 63 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/default/keymap.c b/keyboards/dztech/dz60rgb/keymaps/default/keymap.c index 8de71848d5..2c667ef42e 100644 --- a/keyboards/dztech/dz60rgb/keymaps/default/keymap.c +++ b/keyboards/dztech/dz60rgb/keymaps/default/keymap.c @@ -10,7 +10,7 @@ extern bool g_suspend_state; #define _LAYER7 7 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LAYER0] = LAYOUT( /* Base */ - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + RESET, RGB_MOD, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL),\ diff --git a/keyboards/dztech/dz60rgb/keymaps/hhkb/config.h b/keyboards/dztech/dz60rgb/keymaps/hhkb/config.h new file mode 100644 index 0000000000..a0a0e899f8 --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/hhkb/config.h @@ -0,0 +1,4 @@ +#pragma once +#define dzrgb60_hhkb +#define DRIVER_1_LED_TOTAL 62 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c b/keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c new file mode 100644 index 0000000000..6ba3ac7e6c --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/hhkb/keymap.c @@ -0,0 +1,84 @@ +#include QMK_KEYBOARD_H +extern bool g_suspend_state; +#define _LAYER0 0 +#define _LAYER1 1 +#define _LAYER2 2 +#define _LAYER3 3 +#define _LAYER4 4 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT_HHKB( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DEL, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_RCTL), + [_LAYER1] = LAYOUT_HHKB( /* FN */ + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, TO(3), KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER2] = LAYOUT_HHKB( /* FN2 */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER3] = LAYOUT_HHKB( /* FN3 */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DEL, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(4),\ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, MO(4), KC_RGUI, KC_RCTL), + [_LAYER4] = LAYOUT_HHKB( /* FN4 */ + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_TRNS), + }; + + +void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { + rgb_led led; + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + led = g_rgb_leds[i]; + if (led.matrix_co.raw < 0xFF) { + if (led.modifier) { + rgb_matrix_set_color( i, red, green, blue ); + } + } + } +} + +void rgb_matrix_indicators_user(void) { + uint8_t this_led = host_keyboard_leds(); + if (!g_suspend_state) { + switch (biton32(layer_state)) { + case _LAYER1: + rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; + case _LAYER2: + rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; + case _LAYER3: + rgb_matrix_layer_helper(0x00, 0x00, 0xFF, false); break; + case _LAYER4: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; + } + } + if ( this_led & (1<<USB_LED_CAPS_LOCK)) { + rgb_matrix_set_color(41, 0xFF, 0xFF, 0xFF); + } + +} + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; + } diff --git a/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h b/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h new file mode 100644 index 0000000000..bdafd9cd60 --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/config.h @@ -0,0 +1,4 @@ +#pragma once +#define dzrgb60_hhkb_iso +#define DRIVER_1_LED_TOTAL 62 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c b/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c new file mode 100644 index 0000000000..772eddf07c --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/hhkb_iso/keymap.c @@ -0,0 +1,84 @@ +#include QMK_KEYBOARD_H +extern bool g_suspend_state; +#define _LAYER0 0 +#define _LAYER1 1 +#define _LAYER2 2 +#define _LAYER3 3 +#define _LAYER4 4 +#define _LAYER5 5 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT_HHKB_ISO( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DEL, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_RALT, MO(1), KC_RCTL), + [_LAYER1] = LAYOUT_HHKB_ISO( /* FN */ + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, TO(3), KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER2] = LAYOUT_HHKB_ISO( /* LIGHT */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET ,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER3] = LAYOUT_HHKB_ISO( /* NUMPAD */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DEL, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(4),\ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, MO(4), KC_RGUI, KC_RCTL), + [_LAYER4] = LAYOUT_HHKB_ISO( /* MAC */ + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_PSCR, KC_SLCK, KC_PAUS, RESET ,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_TRNS), + }; + +void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { + rgb_led led; + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + led = g_rgb_leds[i]; + if (led.matrix_co.raw < 0xFF) { + if (led.modifier) { + rgb_matrix_set_color( i, red, green, blue ); + } + } + } +} + +void rgb_matrix_indicators_user(void) { + uint8_t this_led = host_keyboard_leds(); + if (!g_suspend_state) { + switch (biton32(layer_state)) { + case _LAYER1: + rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; + case _LAYER2: + rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; + case _LAYER3: + rgb_matrix_layer_helper(0x00, 0x00, 0xFF, false); break; + case _LAYER4: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; + } + } + if ( this_led & (1<<USB_LED_CAPS_LOCK)) { + rgb_matrix_set_color(41, 0xFF, 0xFF, 0xFF); + } + +} + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; + } diff --git a/keyboards/dztech/dz60rgb/keymaps/iso/config.h b/keyboards/dztech/dz60rgb/keymaps/iso/config.h new file mode 100644 index 0000000000..bc830ff18d --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/iso/config.h @@ -0,0 +1,4 @@ +#pragma once +#define dzrgb60_iso +#define DRIVER_1_LED_TOTAL 61 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL diff --git a/keyboards/dztech/dz60rgb/keymaps/iso/keymap.c b/keyboards/dztech/dz60rgb/keymaps/iso/keymap.c new file mode 100644 index 0000000000..a78e23703b --- /dev/null +++ b/keyboards/dztech/dz60rgb/keymaps/iso/keymap.c @@ -0,0 +1,83 @@ +#include QMK_KEYBOARD_H +extern bool g_suspend_state; +#define _LAYER0 0 +#define _LAYER1 1 +#define _LAYER2 2 +#define _LAYER3 3 +#define _LAYER4 4 +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT_ANSI( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(2), KC_RCTL), + [_LAYER1] = LAYOUT_ANSI( /* FN */ + TO(3), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,\ + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_CALC, KC_TRNS, KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, \ + KC_TRNS, KC_TRNS, KC_TRNS, TO(3), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER2] = LAYOUT_ANSI( /* FN2 */ + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, RESET,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS,\ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_LAYER3] = LAYOUT_ANSI( /* FN3 */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLASH,\ + CTL_T(KC_CAPS),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_TRNS,MO(4), KC_RALT, KC_RCTL), + [_LAYER4] = LAYOUT_ANSI( /* FN4 */ + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL ,\ + KC_TRNS, RGB_TOG, KC_TRNS, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_MOD, KC_PSCR, KC_SLCK, KC_PAUS, RESET,\ + KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPI, RGB_SPD, KC_HOME, KC_PGUP, KC_TRNS,\ + KC_MPRV, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDOWN,KC_MNXT, \ + KC_TRNS, KC_TRNS, KC_TRNS, TO(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + }; + +void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue, bool default_layer) { + rgb_led led; + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + led = g_rgb_leds[i]; + if (led.matrix_co.raw < 0xFF) { + if (led.modifier) { + rgb_matrix_set_color( i, red, green, blue ); + } + } + } +} + +void rgb_matrix_indicators_user(void) { + uint8_t this_led = host_keyboard_leds(); + if (!g_suspend_state) { + switch (biton32(layer_state)) { + case _LAYER1: + rgb_matrix_layer_helper(0xFF, 0x00, 0x00, false); break; + case _LAYER2: + rgb_matrix_layer_helper(0x00, 0xFF, 0x00, false); break; + case _LAYER3: + rgb_matrix_layer_helper(0x00, 0x00, 0xFF, false); break; + case _LAYER4: + rgb_matrix_layer_helper(0xFF, 0xFF, 0x00, false); break; + } + } + if ( this_led & (1<<USB_LED_CAPS_LOCK)) { + rgb_matrix_set_color(40, 0xFF, 0xFF, 0xFF); + } + +} + +void matrix_init_user(void) { + //user initialization +} + +void matrix_scan_user(void) { + //user matrix +} + + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; + } |