summaryrefslogtreecommitdiff
path: root/keyboards/dz60/keymaps/LEdiodes
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/dz60/keymaps/LEdiodes')
-rw-r--r--keyboards/dz60/keymaps/LEdiodes/config.h58
-rw-r--r--keyboards/dz60/keymaps/LEdiodes/keymap.c141
-rw-r--r--keyboards/dz60/keymaps/LEdiodes/readme.md9
-rw-r--r--keyboards/dz60/keymaps/LEdiodes/rules.mk57
4 files changed, 265 insertions, 0 deletions
diff --git a/keyboards/dz60/keymaps/LEdiodes/config.h b/keyboards/dz60/keymaps/LEdiodes/config.h
new file mode 100644
index 0000000000..bb78d9bb66
--- /dev/null
+++ b/keyboards/dz60/keymaps/LEdiodes/config.h
@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x2260
+#define DEVICE_VER 0x0001
+#define MANUFACTURER KBDFans
+#define PRODUCT DZ60
+#define DESCRIPTION DZ60 Keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
+#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#define BACKLIGHT_LEVELS 5
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 16
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+
+/* sets 'Auto Shift' timeouts */
+#define AUTO_SHIFT_TIMEOUT 150
+#define NO_AUTO_SHIFT_SPECIAL
+
+#endif
diff --git a/keyboards/dz60/keymaps/LEdiodes/keymap.c b/keyboards/dz60/keymaps/LEdiodes/keymap.c
new file mode 100644
index 0000000000..46bdb5fed1
--- /dev/null
+++ b/keyboards/dz60/keymaps/LEdiodes/keymap.c
@@ -0,0 +1,141 @@
+#include "xd60.h"
+#include "action_layer.h"
+
+#Define _L0 0
+#Define _L1 1
+#Define _L2 2
+#Define _L3 3
+#Define _L4 4
+
+#define _______ KC_TRNS
+
+/*
+ * template
+ * [_L1] = KEYMAP(
+ * _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ * _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ * _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ * _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
+ * _______,_______,_______, _______,_______,_______, _______,_______,_______,_______,_______,
+ *
+ *
+ *\
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Keymap _L0: (Layer 0 - Base Layer) This is the default layer
+ * This layer has a key set to MO(_L1) which means when held down Layer 1 will become active, If Layer 1 does not have anything set for tat key is will revert to uing the key set at layer 0.
+ * LT(_L1, KC_1) means that when the "1" key is long touched then it will activate the layer _L1 key(F1) but if the key is just tapped it will activate the "1" key.
+ * KC_GESC = Escape when tapped, ` when pressed with Shift or GUI
+ * KC_LSPO = Left Shift when held, ( when tapped
+ * TD(LT(_L3,KC_SPACE)) = This is a test... hoping it will tap dance if double tapped it does enter if single tap it does space if long hold down it does _L3(Layer 3).
+ * LT(_L3,KC_SPACE) = if tapped it does space, is long touch it does _L3(Layer 3)
+ * BL_TOGG = Toggles the LEDs.
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = |Bkspc| Del |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ |
+ * |-----------------------------------------------------------------------------------------+
+ * | _L4 | A | S | D | F | G | H | J | K | L | ; | ' | Enter |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift | Z | X | C | V | B | N | M | , | . | / | RSh | U | _L1 |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl | Win | Alt | _L3[Space] |LEdiodes| Space |Win | _L2| L | D | R |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L0] = KEYMAP(
+ KC_GESC, LT(_L1, KC_1),LT(_L1, KC_2),LT(_L1, KC_3),LT(_L1, KC_4),LT(_L1, KC_5),LT(_L1, KC_6),LT(_L1, KC_7),LT(_L1, KC_8),LT(_L1, KC_9),LT(_L1, KC_0),LT(_L1, KC_MINS),LT(_L1, KC_EQL),KC_BSPC, KC_DEL, \
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, \
+ KC_LSPO, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPO, KC_UP, M0(_L1), \
+ KC_LCTL, KC_LGUI, KC_LALT, TD(LT(_L3,KC_SPACE)),BL_TOGG,TD(TD_SPC_ENT), KC_RGUI, M0(_L2), KC_LEFT, KC_DOWN, KC_RIGHT),
+
+/* Keymap _L1: (Layer 1) This is function layer 1
+ * This layer is activated while the Fn key is being held down.
+ * ,-----------------------------------------------------------------------------------------.
+ * | Reset | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | F13| F14|
+ * |-----------------------------------------------------------------------------------------+
+ * | | WhUp| U | WhDn | | | | | | PrtScr | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | L | D | R | | | Home | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | End | VolDn|VolUp|Mute | | | PgUp| |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | Home| PgDn| End |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L1] = KEYMAP(
+ RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, \
+ _______, KC_WH_U, KC_UP, KC_WH_D, _______, _______,_______, _______, _______, _______, KC_PSCR, _______, _______, _______, \
+ _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, KC_HOME, _______, _______, _______, KC_HOME, _______, _______, _______, \
+ _______, _______, _______, KC_APP, BL_STEP,_______, KC_END, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, KC_PGUP, _______, \
+ _______, _______, _______, _______,_______,_______, _______, _______, KC_HOME, KC_PGDOWN, KC_END),
+
+/* Keymap _L2: (Layer 2) This is function layer 2
+ * This layer is activated while the Fn2 key is being held down.
+ * LCA(KC_TAB) = Hold Left Control and Alt and press kc_tab which cycles trough open apps.
+ * MEH(KC_TAB) = Hold Left Control, Shift and Alt and press kc_TAB to cycle backwards through apps.
+ * ,-----------------------------------------------------------------------------------------.
+ * | | | | | | | | | | | | | | | LCA(KC_TAB)|
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | | | | |MEH(KC_TAB)
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | || | | | | |
+ * |-----------------------------------------------------------------------------------------+
+ * | | | | | | | | | | | |
+ * `-----------------------------------------------------------------------------------------'
+ */
+[_L2] = KEYMAP(
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,LCA(KC_TAB), \
+ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, MEH(KC_TAB), \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
+ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,KC_MS_BTN1,KC_MS_UP,KC_MS_BTN2, \
+ _______,_______,_______, _______,_______,_______, _______,_______,KC_MS_LEFT,KC_MS_DOWN,KC_MS_RIGHT,
+
+};
+
+// Custom Actions
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
+};
+
+// Macros
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ if (record->event.pressed) { register_code(KC_RSFT); }
+ else { unregister_code(KC_RSFT); }
+ break;
+ }
+
+ return MACRO_NONE;
+};
+
+// Loop
+void matrix_scan_user(void) {
+ // Empty
+};
+
+//Tap Dance Declarations
+enum {
+ TD_SPC_ENT = 0,
+ TD_KC_LSFT_CAPS = 0,
+ TD_KC_RSFT_CAPS = 0
+};
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+
+ //Tap once for space, tap twice for enter
+ [TD_SPC_ENT] = ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT),
+ //Tap once for Left Shift, twice for Caps Lock
+ [TD_KC_LSFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS),
+ //Tap once for Right Shift, twice for Caps Lock
+ [TD_KC_RSFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_RSFT, KC_CAPS)
+
+// Other declarations would go here, separated by commas, if you have them
+
+};
diff --git a/keyboards/dz60/keymaps/LEdiodes/readme.md b/keyboards/dz60/keymaps/LEdiodes/readme.md
new file mode 100644
index 0000000000..db83b2494d
--- /dev/null
+++ b/keyboards/dz60/keymaps/LEdiodes/readme.md
@@ -0,0 +1,9 @@
+# LEdiodes Keymap for XD60 60% PCB
+
+![LEdiodes Layer 0 Keymap for XD60](https://i.imgur.com/pDneawX.jpg)
+
+## Additional Notes
+Layer 0(default) Keymap for LEdiodes XD60.
+
+## Build
+To build the default keymap, simply run `make xd60:LEdiodes`.
diff --git a/keyboards/dz60/keymaps/LEdiodes/rules.mk b/keyboards/dz60/keymaps/LEdiodes/rules.mk
new file mode 100644
index 0000000000..f54d9500fb
--- /dev/null
+++ b/keyboards/dz60/keymaps/LEdiodes/rules.mk
@@ -0,0 +1,57 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = no # Console for debug(+400)
+COMMAND_ENABLE = no # Commands for debug and configuration
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes
+AUTO_SHIFT_ENABLE = yes # If the time depressed is greater than or equal to the AUTO_SHIFT_TIMEOUT, then a shifted version of the key is emitted. If the time is less than the AUTO_SHIFT_TIMEOUT time, then the normal state is emitted \ No newline at end of file