6 files changed, 147 insertions, 138 deletions
diff --git a/keyboards/chibios_test/stm32_f072_onekey/Makefile b/keyboards/chibios_test/stm32_f072_onekey/Makefile
index eae38c4b2b..191c6bb664 100644
--- a/keyboards/chibios_test/stm32_f072_onekey/Makefile
+++ b/keyboards/chibios_test/stm32_f072_onekey/Makefile
@@ -1,41 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F0xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F072xB
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f0xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = ST_STM32F072B_DISCOVERY
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m0
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 6
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-# Build Options
-#   comment out to disable the options.
-#
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
+endif
+\ No newline at end of file
diff --git a/keyboards/chibios_test/stm32_f072_onekey/rules.mk b/keyboards/chibios_test/stm32_f072_onekey/rules.mk
new file mode 100644
index 0000000000..eae38c4b2b
--- /dev/null
+++ b/keyboards/chibios_test/stm32_f072_onekey/rules.mk
@@ -0,0 +1,41 @@
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F0xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+MCU_LDSCRIPT = STM32F072xB
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f0xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+BOARD = ST_STM32F072B_DISCOVERY
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m0
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 6
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+# Build Options
+#   comment out to disable the options.
+#
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/chibios_test/stm32_f103_onekey/Makefile b/keyboards/chibios_test/stm32_f103_onekey/Makefile
index 307ca5b198..191c6bb664 100644
--- a/keyboards/chibios_test/stm32_f103_onekey/Makefile
+++ b/keyboards/chibios_test/stm32_f103_onekey/Makefile
@@ -1,52 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-# GENERIC STM32F103C8T6 board - stm32duino bootloader
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
-MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
-BOARD = GENERIC_STM32_F103
-
-# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
-# OPT_DEFS =
-# MCU_LDSCRIPT = STM32F103x8
-# BOARD = GENERIC_STM32_F103
-
-# MAPLE MINI
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
-# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
-# BOARD = MAPLEMINI_STM32_F103
-
-## chip/board settings
-# the next two should match the directories in
-#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F1xx
-# linker script to use
-# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#  or <this_dir>/ld/
-# startup code to use
-# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f1xx
-# it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m3
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
-# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
-# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
-# a custom board definition that you plan to reuse).
-# If you're not setting it here, leave it commented out.
-# It is chip dependent, the correct number can be looked up here (page 175):
-# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
-# This also requires a patch to chibios:
-#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
-#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
-
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
+endif
+\ No newline at end of file
diff --git a/keyboards/chibios_test/stm32_f103_onekey/rules.mk b/keyboards/chibios_test/stm32_f103_onekey/rules.mk
new file mode 100644
index 0000000000..307ca5b198
--- /dev/null
+++ b/keyboards/chibios_test/stm32_f103_onekey/rules.mk
@@ -0,0 +1,52 @@
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+# GENERIC STM32F103C8T6 board - stm32duino bootloader
+OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
+MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
+BOARD = GENERIC_STM32_F103
+
+# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
+# OPT_DEFS =
+# MCU_LDSCRIPT = STM32F103x8
+# BOARD = GENERIC_STM32_F103
+
+# MAPLE MINI
+# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
+# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
+# BOARD = MAPLEMINI_STM32_F103
+
+## chip/board settings
+# the next two should match the directories in
+#  <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+MCU_FAMILY = STM32
+MCU_SERIES = STM32F1xx
+# linker script to use
+# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#  or <this_dir>/ld/
+# startup code to use
+# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+MCU_STARTUP = stm32f1xx
+# it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# Cortex version
+# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
+MCU  = cortex-m3
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+ARMV = 7
+# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
+# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
+# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
+# a custom board definition that you plan to reuse).
+# If you're not setting it here, leave it commented out.
+# It is chip dependent, the correct number can be looked up here (page 175):
+# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
+# This also requires a patch to chibios:
+#   <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
+#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
+
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
diff --git a/keyboards/chibios_test/teensy_lc_onekey/Makefile b/keyboards/chibios_test/teensy_lc_onekey/Makefile
index 43ea9d82d9..191c6bb664 100644
--- a/keyboards/chibios_test/teensy_lc_onekey/Makefile
+++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile
@@ -1,49 +1,3 @@
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = KL2x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MKL26Z64
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = kl2x
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_LC
-
-# Cortex version
-# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
-MCU  = cortex-m0plus
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 6
-
-ifndef QUANTUM_DIR
+ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
 endif
 \ No newline at end of file
diff --git a/keyboards/chibios_test/teensy_lc_onekey/rules.mk b/keyboards/chibios_test/teensy_lc_onekey/rules.mk
new file mode 100644
index 0000000000..43ea9d82d9
--- /dev/null
+++ b/keyboards/chibios_test/teensy_lc_onekey/rules.mk
@@ -0,0 +1,49 @@
+# project specific files
+SRC =	matrix.c \
+	    led.c
+
+## chip/board settings
+# - the next two should match the directories in
+#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
+# - For Teensies, FAMILY = KINETIS and SERIES is either
+#   KL2x (LC) or K20x (3.0,3.1,3.2).
+MCU_FAMILY = KINETIS
+MCU_SERIES = KL2x
+
+# Linker script to use
+# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
+#   or <this_dir>/ld/
+# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
+# - LDSCRIPT =
+#   - MKL26Z64 for Teensy LC
+#   - MK20DX128 for Teensy 3.0
+#   - MK20DX256 for Teensy 3.1 and 3.2
+MCU_LDSCRIPT = MKL26Z64
+
+# Startup code to use
+#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
+# - STARTUP =
+#   - kl2x for Teensy LC
+#   - k20x5 for Teensy 3.0
+#   - k20x7 for Teensy 3.1 and 3.2
+MCU_STARTUP = kl2x
+
+# Board: it should exist either in <chibios>/os/hal/boards/
+#  or <this_dir>/boards
+# - BOARD =
+#   - PJRC_TEENSY_LC for Teensy LC
+#   - PJRC_TEENSY_3 for Teensy 3.0
+#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
+BOARD = PJRC_TEENSY_LC
+
+# Cortex version
+# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
+MCU  = cortex-m0plus
+
+# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
+# I.e. 6 for Teensy LC; 7 for Teensy 3.x
+ARMV = 6
+
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+\ No newline at end of file