diff options
Diffstat (limited to 'keyboards/cheshire/curiosity')
-rw-r--r-- | keyboards/cheshire/curiosity/chconf.h | 206 | ||||
-rw-r--r-- | keyboards/cheshire/curiosity/halconf.h | 266 |
2 files changed, 417 insertions, 55 deletions
diff --git a/keyboards/cheshire/curiosity/chconf.h b/keyboards/cheshire/curiosity/chconf.h index 99fa8ce398..8d66b51d23 100644 --- a/keyboards/cheshire/curiosity/chconf.h +++ b/keyboards/cheshire/curiosity/chconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -15,7 +15,7 @@ */ /** - * @file templates/chconf.h + * @file rt/templates/chconf.h * @brief Configuration file template. * @details A copy of this file must be placed in each project directory, it * contains the application specific kernel settings. @@ -29,6 +29,7 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ /*===========================================================================*/ /** @@ -41,14 +42,34 @@ * @brief System time counter resolution. * @note Allowed values are 16 or 32 bits. */ +#if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 +#endif /** * @brief System tick frequency. * @details Frequency of the system timer that drives the system ticks. This * setting also defines the system tick time unit. */ +#if !defined(CH_CFG_ST_FREQUENCY) #define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif /** * @brief Time delta constant for the tick-less mode. @@ -58,7 +79,9 @@ * The value one is not valid, timeouts are rounded up to * this value. */ +#if !defined(CH_CFG_ST_TIMEDELTA) #define CH_CFG_ST_TIMEDELTA 2 +#endif /** @} */ @@ -81,7 +104,9 @@ * @note The round robin preemption is not supported in tickless mode and * must be set to zero in that case. */ +#if !defined(CH_CFG_TIME_QUANTUM) #define CH_CFG_TIME_QUANTUM 0 +#endif /** * @brief Managed RAM size. @@ -94,7 +119,9 @@ * provide the @p __heap_base__ and @p __heap_end__ symbols. * @note Requires @p CH_CFG_USE_MEMCORE. */ +#if !defined(CH_CFG_MEMCORE_SIZE) #define CH_CFG_MEMCORE_SIZE 0 +#endif /** * @brief Idle thread automatic spawn suppression. @@ -103,11 +130,9 @@ * function becomes the idle thread and must implement an * infinite loop. */ +#if !defined(CH_CFG_NO_IDLE_THREAD) #define CH_CFG_NO_IDLE_THREAD FALSE - -/* Use __WFI in the idle thread for waiting. Does lower the power - * consumption. */ -#define CORTEX_ENABLE_WFI_IDLE TRUE +#endif /** @} */ @@ -126,7 +151,9 @@ * @note This is not related to the compiler optimization options. * @note The default is @p TRUE. */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) #define CH_CFG_OPTIMIZE_SPEED FALSE +#endif /** @} */ @@ -144,7 +171,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_TM) #define CH_CFG_USE_TM FALSE +#endif /** * @brief Threads registry APIs. @@ -152,7 +181,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_REGISTRY) #define CH_CFG_USE_REGISTRY TRUE +#endif /** * @brief Threads synchronization APIs. @@ -161,7 +192,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_WAITEXIT) #define CH_CFG_USE_WAITEXIT TRUE +#endif /** * @brief Semaphores APIs. @@ -169,7 +202,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_SEMAPHORES) #define CH_CFG_USE_SEMAPHORES TRUE +#endif /** * @brief Semaphores queuing mode. @@ -180,7 +215,9 @@ * requirements. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) #define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif /** * @brief Mutexes APIs. @@ -188,7 +225,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MUTEXES) #define CH_CFG_USE_MUTEXES TRUE +#endif /** * @brief Enables recursive behavior on mutexes. @@ -198,7 +237,9 @@ * @note The default is @p FALSE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) #define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif /** * @brief Conditional Variables APIs. @@ -208,7 +249,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_MUTEXES. */ +#if !defined(CH_CFG_USE_CONDVARS) #define CH_CFG_USE_CONDVARS TRUE +#endif /** * @brief Conditional Variables APIs with timeout. @@ -218,7 +261,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_CONDVARS. */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) #define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif /** * @brief Events Flags APIs. @@ -226,7 +271,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_EVENTS) #define CH_CFG_USE_EVENTS TRUE +#endif /** * @brief Events Flags APIs with timeout. @@ -236,7 +283,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_EVENTS. */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) #define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif /** * @brief Synchronous Messages APIs. @@ -245,7 +294,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MESSAGES) #define CH_CFG_USE_MESSAGES TRUE +#endif /** * @brief Synchronous Messages queuing mode. @@ -256,7 +307,9 @@ * requirements. * @note Requires @p CH_CFG_USE_MESSAGES. */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) #define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif /** * @brief Mailboxes APIs. @@ -266,7 +319,9 @@ * @note The default is @p TRUE. * @note Requires @p CH_CFG_USE_SEMAPHORES. */ +#if !defined(CH_CFG_USE_MAILBOXES) #define CH_CFG_USE_MAILBOXES TRUE +#endif /** * @brief Core Memory Manager APIs. @@ -275,7 +330,9 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMCORE) #define CH_CFG_USE_MEMCORE FALSE +#endif /** * @brief Heap Allocator APIs. @@ -287,7 +344,9 @@ * @p CH_CFG_USE_SEMAPHORES. * @note Mutexes are recommended. */ +#if !defined(CH_CFG_USE_HEAP) #define CH_CFG_USE_HEAP FALSE +#endif /** * @brief Memory Pools Allocator APIs. @@ -296,7 +355,31 @@ * * @note The default is @p TRUE. */ +#if !defined(CH_CFG_USE_MEMPOOLS) #define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif /** * @brief Dynamic Threads APIs. @@ -307,7 +390,80 @@ * @note Requires @p CH_CFG_USE_WAITEXIT. * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ +#if !defined(CH_CFG_USE_DYNAMIC) #define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif /** @} */ @@ -323,7 +479,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_STATISTICS) #define CH_DBG_STATISTICS FALSE +#endif /** * @brief Debug option, system state check. @@ -332,7 +490,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) #define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif /** * @brief Debug option, parameters checks. @@ -341,7 +501,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_CHECKS) #define CH_DBG_ENABLE_CHECKS FALSE +#endif /** * @brief Debug option, consistency checks. @@ -351,7 +513,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_ENABLE_ASSERTS) #define CH_DBG_ENABLE_ASSERTS FALSE +#endif /** * @brief Debug option, trace buffer. @@ -359,14 +523,18 @@ * * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. */ +#if !defined(CH_DBG_TRACE_MASK) #define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif /** * @brief Trace buffer entries. * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is * different from @p CH_DBG_TRACE_MASK_DISABLED. */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) #define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif /** * @brief Debug option, stack checks. @@ -378,7 +546,9 @@ * @note The default failure mode is to halt the system with the global * @p panic_msg variable set to @p NULL. */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) #define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif /** * @brief Debug option, stacks initialization. @@ -388,7 +558,9 @@ * * @note The default is @p FALSE. */ +#if !defined(CH_DBG_FILL_THREADS) #define CH_DBG_FILL_THREADS FALSE +#endif /** * @brief Debug option, threads profiling. @@ -399,7 +571,9 @@ * @note This debug option is not currently compatible with the * tickless mode. */ +#if !defined(CH_DBG_THREADS_PROFILING) #define CH_DBG_THREADS_PROFILING FALSE +#endif /** @} */ @@ -411,6 +585,22 @@ /*===========================================================================*/ /** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** * @brief Threads descriptor structure extension. * @details User fields added to the end of the @p thread_t structure. */ @@ -419,9 +609,9 @@ /** * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. + * @details User initialization code added to the @p _thread_init() function. * - * @note It is invoked from within @p chThdInit() and implicitly from all + * @note It is invoked from within @p _thread_init() and implicitly from all * the threads creation APIs. */ #define CH_CFG_THREAD_INIT_HOOK(tp) { \ diff --git a/keyboards/cheshire/curiosity/halconf.h b/keyboards/cheshire/curiosity/halconf.h index 8b9724b1a3..16f32117d5 100644 --- a/keyboards/cheshire/curiosity/halconf.h +++ b/keyboards/cheshire/curiosity/halconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -25,8 +25,11 @@ * @{ */ -#ifndef _HALCONF_H_ -#define _HALCONF_H_ +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ #include "mcuconf.h" @@ -34,140 +37,181 @@ * @brief Enables the PAL subsystem. */ #if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE +#define HAL_USE_PAL TRUE #endif /** * @brief Enables the ADC subsystem. */ #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE +#define HAL_USE_ADC FALSE #endif /** * @brief Enables the CAN subsystem. */ #if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE +#define HAL_USE_CAN FALSE #endif /** - * @brief Enables the DAC subsystem. + * @brief Enables the cryptographic subsystem. */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE #endif /** - * @brief Enables the EXT subsystem. + * @brief Enables the DAC subsystem. */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE #endif /** * @brief Enables the GPT subsystem. */ #if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE +#define HAL_USE_GPT FALSE #endif /** * @brief Enables the I2C subsystem. */ #if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE +#define HAL_USE_I2C FALSE #endif /** * @brief Enables the I2S subsystem. */ #if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE +#define HAL_USE_I2S FALSE #endif /** * @brief Enables the ICU subsystem. */ #if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE +#define HAL_USE_ICU FALSE #endif /** * @brief Enables the MAC subsystem. */ #if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE +#define HAL_USE_MAC FALSE #endif /** * @brief Enables the MMC_SPI subsystem. */ #if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE +#define HAL_USE_MMC_SPI FALSE #endif /** * @brief Enables the PWM subsystem. */ #if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE +#define HAL_USE_PWM FALSE #endif /** * @brief Enables the RTC subsystem. */ #if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE +#define HAL_USE_RTC FALSE #endif /** * @brief Enables the SDC subsystem. */ #if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE +#define HAL_USE_SDC FALSE #endif /** * @brief Enables the SERIAL subsystem. */ #if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE +#define HAL_USE_SERIAL FALSE #endif /** * @brief Enables the SERIAL over USB subsystem. */ #if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE #endif /** * @brief Enables the SPI subsystem. */ #if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE #endif /** * @brief Enables the UART subsystem. */ #if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE +#define HAL_USE_UART FALSE #endif /** * @brief Enables the USB subsystem. */ #if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE +#define HAL_USE_USB TRUE #endif /** * @brief Enables the WDG subsystem. */ #if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE #endif /*===========================================================================*/ @@ -179,7 +223,7 @@ * @note Disabling this option saves both code and data space. */ #if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE +#define ADC_USE_WAIT TRUE #endif /** @@ -187,7 +231,7 @@ * @note Disabling this option saves both code and data space. */ #if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE +#define ADC_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ @@ -198,7 +242,56 @@ * @brief Sleep mode related APIs inclusion switch. */ #if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ @@ -209,7 +302,7 @@ * @brief Enables the mutual exclusion APIs on the I2C bus. */ #if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE +#define I2C_USE_MUTUAL_EXCLUSION TRUE #endif /*===========================================================================*/ @@ -217,17 +310,17 @@ /*===========================================================================*/ /** - * @brief Enables an event sources for incoming packets. + * @brief Enables the zero-copy API. */ #if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE +#define MAC_USE_ZERO_COPY FALSE #endif /** * @brief Enables an event sources for incoming packets. */ #if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE +#define MAC_USE_EVENTS TRUE #endif /*===========================================================================*/ @@ -243,7 +336,7 @@ * use a DMA channel and heavily loads the CPU. */ #if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE +#define MMC_NICE_WAITING TRUE #endif /*===========================================================================*/ @@ -255,7 +348,7 @@ * @note Attempts are performed at 10mS intervals. */ #if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 +#define SDC_INIT_RETRY 100 #endif /** @@ -264,7 +357,7 @@ * at @p FALSE. */ #if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE +#define SDC_MMC_SUPPORT FALSE #endif /** @@ -274,7 +367,21 @@ * lower priority, this may slow down the driver a bit however. */ #if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U #endif /*===========================================================================*/ @@ -287,18 +394,18 @@ * default configuration. */ #if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 +#define SERIAL_DEFAULT_BITRATE 38400 #endif /** * @brief Serial buffers size. * @details Configuration parameter, you can change the depth of the queue * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 16 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 +#define SERIAL_BUFFERS_SIZE 16 #endif /*===========================================================================*/ @@ -309,11 +416,19 @@ * @brief Serial over USB buffers size. * @details Configuration parameter, the buffer size must be a multiple of * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive + * @note The default is 256 bytes for both the transmission and receive * buffers. */ #if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 1 +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 #endif /*===========================================================================*/ @@ -325,15 +440,52 @@ * @note Disabling this option saves both code and data space. */ #if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE #endif + /** * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. * @note Disabling this option saves both code and data space. */ #if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE #endif /*===========================================================================*/ @@ -345,9 +497,29 @@ * @note Disabling this option saves both code and data space. */ #if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE #endif -#endif /* _HALCONF_H_ */ +#endif /* HALCONF_H */ /** @} */ |