diff options
Diffstat (limited to 'keyboards/atom47/rev2/keymaps/LEdiodes')
-rw-r--r-- | keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c | 31 | ||||
-rw-r--r-- | keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h | 25 | ||||
-rw-r--r-- | keyboards/atom47/rev2/keymaps/LEdiodes/config.h | 74 | ||||
-rw-r--r-- | keyboards/atom47/rev2/keymaps/LEdiodes/keymap.c | 35 | ||||
-rw-r--r-- | keyboards/atom47/rev2/keymaps/LEdiodes/rules.mk | 65 |
5 files changed, 230 insertions, 0 deletions
diff --git a/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c b/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c new file mode 100644 index 0000000000..7b839e7967 --- /dev/null +++ b/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c @@ -0,0 +1,31 @@ +#include "atom47.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB &= ~(1<<5); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTF |= (1<<5); + } else { + // Turn capslock off + PORTF &= ~(1<<5); + } + led_set_user(usb_led); +} diff --git a/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h b/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h new file mode 100644 index 0000000000..2c19a20cc5 --- /dev/null +++ b/keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h @@ -0,0 +1,25 @@ +#ifndef ATOM47_H +#define ATOM47_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +#define KEYMAP_ANSI( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2c, \ + k30, k31, k32, k33, k34, k36, k38, k39, k3a, k3c \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \ + {k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif diff --git a/keyboards/atom47/rev2/keymaps/LEdiodes/config.h b/keyboards/atom47/rev2/keymaps/LEdiodes/config.h new file mode 100644 index 0000000000..e054f27759 --- /dev/null +++ b/keyboards/atom47/rev2/keymaps/LEdiodes/config.h @@ -0,0 +1,74 @@ +/* +Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Vortex +#define PRODUCT Core +#define DESCRIPTION Atom47 PCB for the Vortex Core + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {B1,B2,B3,B7} +#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +#define RGB_DI_PIN D0 // The pin the LED strip is connected to +#define RGBLED_NUM 1 // Number of LEDs in your strip + +#define QMK_ESC_OUTPUT D7 // usually COL +#define QMK_ESC_INPUT B1 // usually ROW +#define QMK_LED B6 + +#endif + diff --git a/keyboards/atom47/rev2/keymaps/LEdiodes/keymap.c b/keyboards/atom47/rev2/keymaps/LEdiodes/keymap.c new file mode 100644 index 0000000000..75c8654ba6 --- /dev/null +++ b/keyboards/atom47/rev2/keymaps/LEdiodes/keymap.c @@ -0,0 +1,35 @@ +#include "atom47.h" + +// These are all aliases for the function layers. +#define _L0 0 +#define _L1 1 +#define _L2 2 +#define _L3 3 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_L0] = KEYMAP_ANSI( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, MO(_L1), \ + KC_LCTL, KC_LGUI, KC_LALT, TG(_L3), KC_SPC, KC_SPC, MO(_L2), KC_RALT, KC_APP, KC_RCTRL), \ + +[_L2] = KEYMAP_ANSI( + _______, KC_VOLD, KC_VOLU, KC_MUTE, RESET, _______, KC_CALC, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RIGHT, KC_INS, _______, \ + _______, _______, _______, _______, _______, _______, _______, BL_TOGG, BL_DEC, BL_INC, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_L1] = KEYMAP_ANSI( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \ + _______, _______, _______, _______, _______, KC_QUOT, KC_SLSH, KC_LBRC, KC_RBRC, KC_BSLS, KC_RSFT, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), \ + +[_L3] = KEYMAP_ANSI( + _______, _______, _______, KC_7, KC_8, KC_9, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_4, KC_5, KC_6, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, KC_1, KC_2, KC_3, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_0, KC_DOT, _______, _______, _______, RESET), \ +}; diff --git a/keyboards/atom47/rev2/keymaps/LEdiodes/rules.mk b/keyboards/atom47/rev2/keymaps/LEdiodes/rules.mk new file mode 100644 index 0000000000..d446d3a699 --- /dev/null +++ b/keyboards/atom47/rev2/keymaps/LEdiodes/rules.mk @@ -0,0 +1,65 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID |