diff options
Diffstat (limited to 'keyboards/40percentclub/gherkin')
24 files changed, 1088 insertions, 0 deletions
diff --git a/keyboards/40percentclub/gherkin/config.h b/keyboards/40percentclub/gherkin/config.h new file mode 100644 index 0000000000..34f38e35c2 --- /dev/null +++ b/keyboards/40percentclub/gherkin/config.h @@ -0,0 +1,54 @@ +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER 40 Percent Club +#define PRODUCT Gherkin +#define DESCRIPTION A 30 key ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 6 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ +#define BACKLIGHT_PIN B5 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif + +#endif diff --git a/keyboards/40percentclub/gherkin/gherkin.c b/keyboards/40percentclub/gherkin/gherkin.c new file mode 100644 index 0000000000..2952d842cf --- /dev/null +++ b/keyboards/40percentclub/gherkin/gherkin.c @@ -0,0 +1 @@ +#include "gherkin.h" diff --git a/keyboards/40percentclub/gherkin/gherkin.h b/keyboards/40percentclub/gherkin/gherkin.h new file mode 100644 index 0000000000..f8674be40e --- /dev/null +++ b/keyboards/40percentclub/gherkin/gherkin.h @@ -0,0 +1,18 @@ +#ifndef GHERKIN_H +#define GHERKIN_H + +#include "quantum.h" + +#define LAYOUT_ortho_3x10( \ + K00, K01, K02, K03, K04, K05, K10, K11, K12, K13 , \ + K14, K15, K20, K21, K22, K23, K24, K25, K30, K31 , \ + K32, K33, K34, K35, K40, K41, K42, K43, K44, K45 \ +) { \ + { K00, K01, K02, K03, K04, K05 }, \ + { K10, K11, K12, K13, K14, K15 }, \ + { K20, K21, K22, K23, K24, K25 }, \ + { K30, K31, K32, K33, K34, K35 }, \ + { K40, K41, K42, K43, K44, K45 } \ +} + +#endif diff --git a/keyboards/40percentclub/gherkin/info.json b/keyboards/40percentclub/gherkin/info.json new file mode 100644 index 0000000000..7ebbfb04be --- /dev/null +++ b/keyboards/40percentclub/gherkin/info.json @@ -0,0 +1,13 @@ +{ + "keyboard_name": "Gherkin", + "url": "", + "maintainer": "qmk", + "width": 10, + "height": 3, + "layouts": { + "LAYOUT_ortho_3x10": { + "key_count": 30, + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}] + } + } +} diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md new file mode 100644 index 0000000000..3c9a5e98b3 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/README.md @@ -0,0 +1,11 @@ +# Gherkin Layout +This is my gherkin layout. +It is used as a game pad, and key layout is inspired by spare keys I had lying around. +The firmware is very simple, and only includes one layer keymap, and RGB effects. + +# Flashing +The following command should be used from the main qmk directory. +``` +make gherkin:bbaserdem +sudo avrdude -p atmgea34u4 -P `ls /dev/ttyACM*` -c avr109 -U flash:.build/gherkin_bbaserdem.hex +``` diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h new file mode 100644 index 0000000000..37d7113e78 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/config.h @@ -0,0 +1,13 @@ +#ifndef CONFIG_KEYMAP_H +#define CONFIG_KEYMAP_H + +#include "../../config.h" +#define RGB_DI_PIN F6 +#define RGBLED_NUM 10 +#define RGBLIGHT_ANIMATIONS +#ifdef BACKLIGHT_LEVELS +#undef BACKLIGHT_LEVELS +#endif +#define BACKLIGHT_LEVELS 3 + +#endif diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c new file mode 100644 index 0000000000..0d3c8557c5 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/keymap.c @@ -0,0 +1,36 @@ +// This is a game-pad gherkin layout with RGB and LED lights + +#include QMK_KEYBOARD_H + +backlight_config_t backlight_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Game pad + * ,-----------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | Ctl | Alt | ~ | + * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| + * | Tab | Q | W | E | R | T | |^| | ; | ' | / | + * |-----+-----+-----+-----+-----+-----+-----+-----+-----+-----| + * | Shf | A | S | D | F | <-- | |v| | --> | , | . | + * `-----------------------------------------------------------' + */ + LAYOUT_ortho_3x10( + KC_ESCAPE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_LCTRL, KC_LALT, KC_GRAVE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_UP, KC_SCLN, KC_QUOTE, KC_SLASH, + KC_LSHIFT, KC_A, KC_S, KC_D, KC_F, KC_LEFT, KC_DOWN, KC_RIGHT, KC_COMMA, KC_DOT + ) +}; + +void matrix_init_user(void) { + // Set LED's to max + _delay_us(300); + backlight_config.level = 2; + backlight_config.enable = 1; + eeconfig_update_backlight(backlight_config.raw); + backlight_set(backlight_config.level); + // Set RGB to rainbow mood light + rgblight_enable(); + rgblight_mode(1); + rgblight_sethsv(120,255,255); + rgblight_mode(6); +} diff --git a/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk new file mode 100644 index 0000000000..cd1cddebf4 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/bbaserdem/rules.mk @@ -0,0 +1,17 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +USER_NAME := bbaserdem-nouserspace + +STENO_ENABLE = no # Additional protocols for Stenography(+1700), requires VIRTSER +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +AUDIO_ENABLE = no # Enable audio output from keyboard + +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = yes # Enable RBG light strips +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/40percentclub/gherkin/keymaps/default/keymap.c b/keyboards/40percentclub/gherkin/keymaps/default/keymap.c new file mode 100644 index 0000000000..f018200304 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/default/keymap.c @@ -0,0 +1,74 @@ +#include QMK_KEYBOARD_H + +#define _______ KC_TRNS +#define FN1_Q LT(1, KC_Q) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_3x10( + FN1_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, + KC_Z, KC_X, KC_C, KC_V, KC_BSPC, KC_SPC, KC_B, KC_N, KC_M, KC_ENT + ), + + [1] = LAYOUT_ortho_3x10( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_INC, + _______, _______, _______, _______, _______, _______, RESET, _______, _______, BL_DEC + ), + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + keyevent_t event = record->event; + (void)event; + + switch (id) { + + } + return MACRO_NONE; +} + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + DDRD |= (1 << 5); PORTD &= ~(1 << 5); + } else { + DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRB |= (1 << 0); PORTB &= ~(1 << 0); + } else { + DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h new file mode 100644 index 0000000000..71c0cb8b56 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/config.h @@ -0,0 +1,15 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#undef RGB_DI_PIN +#undef RGBLED_NUM +#define RGB_DI_PIN D2 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 8 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#endif
\ No newline at end of file diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c new file mode 100644 index 0000000000..580b041c9c --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/keymap.c @@ -0,0 +1,152 @@ +#include QMK_KEYBOARD_H + +extern rgblight_config_t rgblight_config; +extern keymap_config_t keymap_config; + +#define _PS 0 // This is the Photoshop Layer +#define _AI 1 // This is the Illustrator Layer +#define _PR 2 // This is the Premier Layer +#define _XD 3 // This is the Experience Design Layer + +enum custom_keycodes { + PS = SAFE_RANGE, + AI, + PR, +}; + +#define _______ KC_TRNS + +#define PS TO(0) +#define AI TO(1) +#define PR TO(2) +#define XD TO(3) + +// Mix of Photoshop, Illustrator, Premiere, and Experience Design shortcuts. +#define SAVE LCTL(KC_S) +#define OPEN LCTL(KC_O) +#define COPY LCTL(KC_C) +#define PAST LCTL(KC_V) +#define CUNDO LCTL(LALT(KC_Z)) +#define INVERT LCTL(LSFT(KC_I)) +#define NLAYER LSFT(LCTL(KC_N)) +#define UNDO LCTL(KC_Z) +#define TRANS LCTL(KC_T) +#define ALIGNL LCTL(LSFT(KC_L)) +#define ALIGNC LCTL(LSFT(KC_C)) +#define ALIGNR LCTL(LSFT(KC_R)) +#define BRINGF LCTL(KC_RBRC) +#define BRINGB LCTL(KC_LBRC) + +// Illustrator layer shortcuts. +#define SHAPE LSFT(KC_M) +#define RULER LCTL(LALT(KC_R)) + +// Premiere layer shortcuts. +#define REDO LCTL(LSFT(KC_Z)) +#define EXPORT LCTL(KC_M) +#define IMPORT LCTL(KC_I) +#define PCOPY LCTL(KC_V) +#define PPASTE LCTL(LSFT(KC_V)) + +// Experience Design layer shortcuts. (can be used with others too.) +#define NEW LCTL(KC_N) +#define LOCK LCTL(KC_L) +#define SYMB LCTL(KC_K) +#define HIDE LCTL(KC_SCLN) +#define REPEAT LCTL(KC_R) +#define MASK LCTL(LSFT(KC_M)) +#define GROUP LCTL(KC_G) +#define UNGRP LCTL(LSFT(KC_G)) +#define VIEW LCTL(KC_TAB) +#define HORZ LSFT(KC_C) +#define VERT LSFT(KC_M) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Photoshop layer + [_PS] = LAYOUT_ortho_3x10( + SAVE, KC_W, KC_E, KC_T, KC_U, KC_I, KC_P, INVERT, CUNDO, NLAYER, + UNDO, KC_H, KC_L, TRANS, ALIGNL, ALIGNC, ALIGNR, BRINGB, BRINGF, OPEN, + KC_LSFT, COPY, PAST, KC_Z, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, AI + ), + + // Illustrator layer + [_AI] = LAYOUT_ortho_3x10( + _______, M(0), RULER, _______, KC_G, _______, _______, KC_Q, KC_MINS, KC_PLUS, + _______, _______, _______, KC_E, _______, _______, _______, SHAPE, KC_O, OPEN, + _______, _______, _______, _______, _______, _______, _______, KC_M, KC_SLSH, PR + ), + + // Premiere layer + [_PR] = LAYOUT_ortho_3x10( + _______, KC_Q, KC_W, KC_I, KC_O, KC_P, IMPORT, EXPORT, KC_MINS, KC_EQL, + _______, REDO, KC_D, KC_F, KC_H, KC_M, KC_ENT, KC_LBRC, KC_RBRC, OPEN, + _______, PCOPY, PPASTE, KC_SPC, KC_Z, KC_C, KC_V, KC_LEFT, KC_RIGHT, XD + ), + + // Experience Design layer + [_XD] = LAYOUT_ortho_3x10( + _______, KC_E, KC_R, KC_T, KC_P, KC_A, KC_L, KC_V, KC_DEL, NEW, + _______, REDO, GROUP, UNGRP, VIEW, HORZ, VERT, KC_Z, KC_ENT, OPEN, + _______, KC_LCTL, COPY, PAST, SYMB, LOCK, MASK, HIDE, REPEAT, PS + ), + +}; + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +void matrix_init_user(void) { + rgblight_enable(); +} + +void matrix_scan_user(void) { + #ifdef RGBLIGHT_ENABLE + + static uint8_t old_layer = 255; + uint8_t new_layer = biton32(layer_state); + + // Color of the Icons. + if (old_layer != new_layer) { + switch (new_layer) { + case _PS: + // #31C5F0 + rgblight_setrgb(49, 197, 240); + break; + case _AI: + // #FF8011 + rgblight_setrgb(255, 128, 17); + break; + case _PR: + // #E788FF + rgblight_setrgb(231, 136, 255); + break; + case _XD: + // #FF2BC2 + rgblight_setrgb(255, 43, 194); + break; + } + old_layer = new_layer; + } + #endif +} + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + keyevent_t event = record->event; + (void)event; + + switch (id) { + case 0: + // Save for Web Macro. + return MACRO(D(LSFT), D(LALT), D(LCTL), T(S), U(LCTL), U(LALT), U(LSFT), END); + } + return MACRO_NONE; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + } + return true; +} diff --git a/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk new file mode 100644 index 0000000000..ed0af7b8bd --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/itsaferbie/rules.mk @@ -0,0 +1,7 @@ +BACKLIGHT_ENABLE = yes +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/config.h b/keyboards/40percentclub/gherkin/keymaps/mjt/config.h new file mode 100644 index 0000000000..bb59ec213d --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/mjt/config.h @@ -0,0 +1,169 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Some Guy +#define PRODUCT Gherkin +#define DESCRIPTION 30 percent disaster + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// These are with USB on the left. +// #define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } +// original from TMK: #define MATRIX_COL_PINS { D0, D4, C6, D7, E6, B4 } +// #define MATRIX_COL_PINS { D0, D4, F6, D7, E6, B4 } + +// these are with USB on the right. +#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 } +#define MATRIX_COL_PINS { B4, E6, D7, F6, D4, D0 } + +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_PIN B5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define AUDIO_VOICES + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c b/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c new file mode 100644 index 0000000000..2b4369c34f --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/mjt/keymap.c @@ -0,0 +1,279 @@ +#include QMK_KEYBOARD_H +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif + +extern keymap_config_t keymap_config; + +//Tap Dance Declarations +enum { + TD_Z_LCTL = 0, + TD_X_LGUI = 1, + TD_C_LALT = 2, + TD_A_TAB = 3, + TD_Q_ESC = 4, +// M(0) +}; + +//Friendly Layer Names +enum gherkin_layers { + _QWERTY, + _SONGS, + _NUMBERS, + _SYMBOLS, + _PLOVER, + _ADJUST +}; + +// custom keycodes +enum gherkin_keycodes { + QWERTY = SAFE_RANGE, + NUMBERS, + SYMBOLS, + SONGS, + PLOVER, + BACKLIT, + MACSLEEP, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_ortho_3x10( + TD(TD_Q_ESC), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + TD(TD_A_TAB), LT(_SYMBOLS,KC_S), KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, LT(_ADJUST,KC_SPC), + TD(TD_Z_LCTL), TD(TD_X_LGUI), TD(TD_C_LALT), KC_V, KC_B, LT(_NUMBERS, KC_N), KC_M, KC_COMM, KC_DOT, SFT_T(KC_ENT) + ), + [_NUMBERS] = LAYOUT_ortho_3x10( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_HOME, KC_PGDN, KC_PGUP, KC_END , + KC_F7, KC_F8, KC_F9, KC_F10, LT(_ADJUST,KC_F11), _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT + ), + [_SYMBOLS] = LAYOUT_ortho_3x10( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, + KC_GRV, _______, XXXXXXX, KC_LBRC, KC_RBRC, KC_BSLS, KC_MINS, KC_EQL , KC_SCLN, KC_QUOT, + KC_TILD, MO(_ADJUST), XXXXXXX, KC_LCBR, KC_RCBR, KC_PIPE, KC_UNDS, KC_PLUS, S(KC_SCLN), S(KC_QUOT) + ), + [_PLOVER] = LAYOUT_ortho_3x10( + KC_Q, KC_W, KC_E, KC_R, KC_1, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + EXT_PLV, XXXXXXX, KC_C, KC_V, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX + ), + [_ADJUST] = LAYOUT_ortho_3x10( + RESET, _______, _______, _______, _______, QWERTY, NUMBERS, SYMBOLS, PLOVER, SONGS, + MUV_DE, MUV_IN, MU_ON, MU_OFF, _______, _______, _______, _______, MACSLEEP, _______, + BACKLIT, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case NUMBERS: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_dvorak); + #endif + persistant_default_layer_set(1UL<<_NUMBERS); + } + return false; + break; + case SYMBOLS: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_colemak); + #endif + persistant_default_layer_set(1UL<<_SYMBOLS); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(tone_plover); + #endif + layer_off(_NUMBERS); + layer_off(_SYMBOLS); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(tone_plover_gb); + #endif + layer_off(_PLOVER); + } + return false; + break; + case MACSLEEP: + if (record->event.pressed) { + // ACTION_MODS_KEY(MOD_LCTL | MOD_LSFT, KC_POWER); + register_code(KC_RSFT); + register_code(KC_RCTL); + register_code(KC_POWER); + unregister_code(KC_POWER); + unregister_code(KC_RCTL); + unregister_code(KC_RSFT); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + } + return true; +} + + +/* +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + keyevent_t event = record->event; + + switch (id) { + case 0: { + if (record->event.pressed) { + key_timer = timer_read(); // if the key is being pressed, we start the timer. + } + else { // this means the key was just released, so we can figure out how long it was pressed for (tap or "held down"). + if (timer_elapsed(key_timer) > 150) { // 150 being 150ms, the threshhold we pick for counting something as a tap. + return MACRO( D(LSFT), END ); + } + else { + return MACRO( T(N), END ); + } + } + break; + } + } + return MACRO_NONE; +}*/ + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_SONG(tone_startup); +} + +void shutdown_user() +{ + PLAY_SONG(tone_goodbye); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_SONG(music_scale); +} + +#endif + +void matrix_scan_user(void) { +} + +//Tap Dance Definitions +qk_tap_dance_action_t tap_dance_actions[] = { + //Tap once for Esc, twice for Caps Lock + [TD_Z_LCTL] = ACTION_TAP_DANCE_DOUBLE(KC_Z, KC_LCTL), + [TD_X_LGUI] = ACTION_TAP_DANCE_DOUBLE(KC_X, KC_LGUI), + [TD_C_LALT] = ACTION_TAP_DANCE_DOUBLE(KC_C, KC_LALT), + [TD_A_TAB] = ACTION_TAP_DANCE_DOUBLE(KC_A, KC_TAB), + [TD_Q_ESC] = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC) +}; + +// don't know what this is doing... +/* +void led_set_user(uint8_t usb_led) { + + if (usb_led & (1 << USB_LED_NUM_LOCK)) { + DDRD |= (1 << 5); PORTD &= ~(1 << 5); + } else { + DDRD &= ~(1 << 5); PORTD &= ~(1 << 5); + } + + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + DDRB |= (1 << 0); PORTB &= ~(1 << 0); + } else { + DDRB &= ~(1 << 0); PORTB &= ~(1 << 0); + } + + if (usb_led & (1 << USB_LED_SCROLL_LOCK)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_COMPOSE)) { + + } else { + + } + + if (usb_led & (1 << USB_LED_KANA)) { + + } else { + + } + +} +*/ diff --git a/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk b/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk new file mode 100644 index 0000000000..afb93b674c --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/mjt/rules.mk @@ -0,0 +1,29 @@ +## not sure where this stuff goes ## +MCU = atmega32u4 +F_CPU = 16000000 +ARCH = AVR8 +F_USB = $(F_CPU) +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +TAP_DANCE_ENABLE=yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/config.h b/keyboards/40percentclub/gherkin/keymaps/steno/config.h new file mode 100644 index 0000000000..abacefa01d --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/steno/config.h @@ -0,0 +1,12 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#define NO_ACTION_LAYER +#define NO_ACTION_TAPPING +#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#endif
\ No newline at end of file diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c b/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c new file mode 100644 index 0000000000..c7ee63d126 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/steno/keymap.c @@ -0,0 +1,13 @@ +#include QMK_KEYBOARD_H +#include "keymap_steno.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_3x10( + STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , + STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , + STN_NUM, STN_NUM, STN_A, STN_O, STN_NUM, STN_E, STN_U, STN_NUM, STN_NUM, STN_NUM), +}; + +void matrix_init_user() { + steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT +}
\ No newline at end of file diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/readme.md b/keyboards/40percentclub/gherkin/keymaps/steno/readme.md new file mode 100644 index 0000000000..6536ed7aba --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/steno/readme.md @@ -0,0 +1,9 @@ +# Gherkin Steno + +This is a stenography-only keymap. It boots by default into GeminiPR mode. All the excess stuff is stripped away (I'd remove normal keyboard support if I could). + +> Note: The number bar has been moved to the bottom row in all the left-over spaces. + + | S | T | P | H | * | F | P | L | T | D | + | S | K | W | R | * | R | B | G | S | Z | + | # | # | A | O | # | E | U | # | # | # | diff --git a/keyboards/40percentclub/gherkin/keymaps/steno/rules.mk b/keyboards/40percentclub/gherkin/keymaps/steno/rules.mk new file mode 100644 index 0000000000..fa813f2099 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/steno/rules.mk @@ -0,0 +1,16 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = no # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no
\ No newline at end of file diff --git a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/config.h b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/config.h new file mode 100644 index 0000000000..7fa3bf328e --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/config.h @@ -0,0 +1,6 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +#endif diff --git a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/keymap.c b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/keymap.c new file mode 100644 index 0000000000..ea2921924e --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/keymap.c @@ -0,0 +1,58 @@ +#include QMK_KEYBOARD_H +#include "keymap_steno.h" + +#define ST_BOLT QK_STENO_BOLT +#define ST_GEM QK_STENO_GEMINI + +#define XXXXXXX KC_NO + +enum keyboard_layers { + _QWERTY, + _RAISE, + _LOWER, + _PLOVER, + _ADJUST +}; + +#define ADJ_Z LT(_ADJUST, KC_Z) +#define RS_BSPC LT(_RAISE, KC_BSPC) +#define LW_SPC LT(_LOWER, KC_SPC) +#define MO_ADJ MO(_ADJUST) +#define TG_PLV TG(_PLOVER) +#define OS_LCTL OSM(MOD_LCTL) +#define OS_LALT OSM(MOD_LALT) +#define OS_LGUI OSM(MOD_LGUI) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT_ortho_3x10( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_RSFT, + ADJ_Z, KC_X, KC_C, KC_V, RS_BSPC, LW_SPC, KC_B, KC_N, KC_M, KC_ENT + ), + + [_RAISE] = LAYOUT_ortho_3x10( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_7, KC_9, KC_0, + KC_ESC, KC_MINS, KC_EQL, _______, KC_LBRC, KC_RBRC, _______, KC_QUOT, KC_SCLN, _______, + OS_LCTL, OS_LGUI, OS_LALT, KC_GRV, _______, KC_TAB, KC_BSLS, KC_COMM, KC_DOT, KC_SLSH + ), + + [_LOWER] = LAYOUT_ortho_3x10( + KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_PGUP, KC_HOME, KC_UP, KC_END, XXXXXXX, + KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, _______, + KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, OS_LALT, OS_LGUI, OS_LCTL, KC_CAPS + ), + + [_PLOVER] = LAYOUT_ortho_3x10( + STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, + STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, + MO_ADJ, STN_NUM, STN_A, STN_O, STN_NUM, STN_E, STN_U, STN_NUM, STN_NUM, XXXXXXX + ), + + [_ADJUST] = LAYOUT_ortho_3x10( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, ST_BOLT, ST_GEM, TG_PLV, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET + ), + +}; diff --git a/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/rules.mk b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/rules.mk new file mode 100644 index 0000000000..02216ecb36 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/talljoe-gherkin/rules.mk @@ -0,0 +1,6 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif + +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +STENO_ENABLE = yes # Additional protocols for Stenography(+1700), requires VIRTSER diff --git a/keyboards/40percentclub/gherkin/readme.md b/keyboards/40percentclub/gherkin/readme.md new file mode 100644 index 0000000000..a6680d7205 --- /dev/null +++ b/keyboards/40percentclub/gherkin/readme.md @@ -0,0 +1,21 @@ +# Gherkin + + +=== + +A 30 key keyboard. + +* [The original TMK firmware](https://github.com/di0ib/tmk_keyboard/tree/master/keyboard/gherkin) + +Keyboard Maintainer: QMK Community +Hardware Supported: Gherkin PCB +Hardware Availability: [Gherkin project on 40% Keyboards](http://www.40percent.club/2016/11/gherkin.html) + +Make example for this keyboard (after setting up your build environment): + + make 40percentclub/gherkin:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +First pass at adding support for the gherkin keyboard. Compiles but completely +untested. Intended to kick-start development. diff --git a/keyboards/40percentclub/gherkin/rules.mk b/keyboards/40percentclub/gherkin/rules.mk new file mode 100644 index 0000000000..416ca5e5f4 --- /dev/null +++ b/keyboards/40percentclub/gherkin/rules.mk @@ -0,0 +1,59 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no + +LAYOUTS = ortho_3x10 |