diff options
Diffstat (limited to 'keyboards/3w6/rev1')
| -rw-r--r-- | keyboards/3w6/rev1/matrix.c | 88 |
1 files changed, 33 insertions, 55 deletions
diff --git a/keyboards/3w6/rev1/matrix.c b/keyboards/3w6/rev1/matrix.c index 7262fd22e6..af3d210670 100644 --- a/keyboards/3w6/rev1/matrix.c +++ b/keyboards/3w6/rev1/matrix.c @@ -35,8 +35,6 @@ extern i2c_status_t tca9555_status; // | 0 | 1 | 0 | 0 | A2 | A1 | A0 | // | 0 | 1 | 0 | 0 | 0 | 0 | 0 | #define I2C_ADDR 0b0100000 -#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE) -#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ) // Register addresses #define IODIRA 0x06 // i/o direction register @@ -64,19 +62,14 @@ uint8_t init_tca9555(void) { // - unused : input : 1 // - input : input : 1 // - driving : output : 0 - tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); - if (tca9555_status) goto out; - tca9555_status = i2c_write(IODIRA, I2C_TIMEOUT); - if (tca9555_status) goto out; - // This means: write on pin 5 of port 0, read on rest - tca9555_status = i2c_write(0b11011111, I2C_TIMEOUT); - if (tca9555_status) goto out; - // This means: we will write on pins 0 to 2 on port 1. read rest - tca9555_status = i2c_write(0b11111000, I2C_TIMEOUT); - if (tca9555_status) goto out; - -out: - i2c_stop(); + uint8_t conf[2] = { + // This means: write on pin 5 of port 0, read on rest + 0b11011111, + // This means: we will write on pins 0 to 2 on port 1. read rest + 0b11111000, + }; + tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT); + return tca9555_status; } @@ -192,36 +185,29 @@ static matrix_row_t read_cols(uint8_t row) { if (tca9555_status) { // if there was an error return 0; } else { - uint8_t data = 0; - uint8_t port0 = 0; - uint8_t port1 = 0; - tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); - if (tca9555_status) goto out; - tca9555_status = i2c_write(IREGP0, I2C_TIMEOUT); - if (tca9555_status) goto out; - tca9555_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT); - if (tca9555_status) goto out; - tca9555_status = i2c_read_ack(I2C_TIMEOUT); - if (tca9555_status < 0) goto out; - port0 = (uint8_t)tca9555_status; - tca9555_status = i2c_read_nack(I2C_TIMEOUT); - if (tca9555_status < 0) goto out; - port1 = (uint8_t)tca9555_status; - - // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero. - // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys. - // Since the pins are not ordered sequentially, we have to build the correct dataset from the two ports. Refer to the schematic to see where every pin is connected. - data |= ( port0 & 0x01 ); - data |= ( port0 & 0x02 ); - data |= ( port1 & 0x10 ) >> 2; - data |= ( port1 & 0x08 ); - data |= ( port0 & 0x40 ) >> 2; - data = ~(data); - - tca9555_status = I2C_STATUS_SUCCESS; - out: - i2c_stop(); - return data; + uint8_t data = 0; + uint8_t ports[2] = {0}; + tca9555_status = i2c_readReg(I2C_ADDR, IREGP0, ports, 2, I2C_TIMEOUT); + if (tca9555_status) { // if there was an error + // do nothing + return 0; + } else { + uint8_t port0 = ports[0]; + uint8_t port1 = ports[1]; + + // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero. + // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys. + // Since the pins are not ordered sequentially, we have to build the correct dataset from the two ports. Refer to the schematic to see where every pin is connected. + data |= ( port0 & 0x01 ); + data |= ( port0 & 0x02 ); + data |= ( port1 & 0x10 ) >> 2; + data |= ( port1 & 0x08 ); + data |= ( port0 & 0x40 ) >> 2; + data = ~(data); + + tca9555_status = I2C_STATUS_SUCCESS; + return data; + } } } } @@ -263,18 +249,10 @@ static void select_row(uint8_t row) { default: break; } - tca9555_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); - if (tca9555_status) goto out; - tca9555_status = i2c_write(OREGP0, I2C_TIMEOUT); - if (tca9555_status) goto out; - tca9555_status = i2c_write(port0, I2C_TIMEOUT); - if (tca9555_status) goto out; - tca9555_status = i2c_write(port1, I2C_TIMEOUT); - if (tca9555_status) goto out; + uint8_t ports[2] = {port0, port1}; + tca9555_status = i2c_writeReg(I2C_ADDR, OREGP0, ports, 2, I2C_TIMEOUT); // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one. // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus. - out: - i2c_stop(); } } } |