diff options
Diffstat (limited to 'keyboard/onekey')
| -rw-r--r-- | keyboard/onekey/Makefile | 132 | ||||
| -rw-r--r-- | keyboard/onekey/Makefile.pjrc | 103 | ||||
| -rw-r--r-- | keyboard/onekey/README.md | 5 | ||||
| -rw-r--r-- | keyboard/onekey/config.h | 156 | ||||
| -rw-r--r-- | keyboard/onekey/keymap.c | 66 | ||||
| -rw-r--r-- | keyboard/onekey/led.c | 25 | ||||
| -rw-r--r-- | keyboard/onekey/matrix.c | 176 |
7 files changed, 663 insertions, 0 deletions
diff --git a/keyboard/onekey/Makefile b/keyboard/onekey/Makefile new file mode 100644 index 0000000000..54a2d486fd --- /dev/null +++ b/keyboard/onekey/Makefile @@ -0,0 +1,132 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = onekey_lufa + +# Directory common source filess exist +TMK_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +#MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +#EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +#COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + +#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +#PS2_USE_BUSYWAIT = yes # uses primitive reference code +#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin +#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/protocol/lufa.mk +include $(TMK_DIR)/rules.mk diff --git a/keyboard/onekey/Makefile.pjrc b/keyboard/onekey/Makefile.pjrc new file mode 100644 index 0000000000..e4ca0783ad --- /dev/null +++ b/keyboard/onekey/Makefile.pjrc @@ -0,0 +1,103 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = onekey_pjrc + +# Directory common source filess exist +TMK_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u4 +#MCU = at90usb1286 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +#MOUSEKEY_ENABLE = yes # Mouse keys(+5000) +#EXTRAKEY_ENABLE = yes # Audio control and System control(+600) +CONSOLE_ENABLE = yes # Console for debug +#COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover(+500) + +PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support +PS2_USE_BUSYWAIT = yes # uses primitive reference code +#PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin +#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/protocol/pjrc.mk +include $(TMK_DIR)/rules.mk diff --git a/keyboard/onekey/README.md b/keyboard/onekey/README.md new file mode 100644 index 0000000000..7413f3880e --- /dev/null +++ b/keyboard/onekey/README.md @@ -0,0 +1,5 @@ +Onekey +====== +Just one key keyboard for example. It sends 'a' key if pins PB0 and PB1 are short-circuited. + +https://github.com/tmk/tmk_keyboard/issues/56 diff --git a/keyboard/onekey/config.h b/keyboard/onekey/config.h new file mode 100644 index 0000000000..bf1d2b1ed3 --- /dev/null +++ b/keyboard/onekey/config.h @@ -0,0 +1,156 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1111 +#define DEVICE_VER 0x0001 +#define MANUFACTURER geekhack +#define PRODUCT Onekey +#define DESCRIPTION t.m.k. keyboard firmware for Onekey + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 1 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +/* PS/2 mouse */ +#ifdef PS2_USE_BUSYWAIT +# define PS2_CLOCK_PORT PORTD +# define PS2_CLOCK_PIN PIND +# define PS2_CLOCK_DDR DDRD +# define PS2_CLOCK_BIT 1 +# define PS2_DATA_PORT PORTD +# define PS2_DATA_PIN PIND +# define PS2_DATA_DDR DDRD +# define PS2_DATA_BIT 2 +#endif + + +/* PS/2 mouse interrupt version */ +#ifdef PS2_USE_INT +/* uses INT1 for clock line(ATMega32U4) */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 1 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 + +#define PS2_INT_INIT() do { \ + EICRA |= ((1<<ISC11) | \ + (0<<ISC10)); \ +} while (0) +#define PS2_INT_ON() do { \ + EIMSK |= (1<<INT1); \ +} while (0) +#define PS2_INT_OFF() do { \ + EIMSK &= ~(1<<INT1); \ +} while (0) +#define PS2_INT_VECT INT1_vect +#endif + + +/* PS/2 mouse USART version */ +#ifdef PS2_USE_USART +#if defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) +/* XCK for clock line and RXD for data line */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 5 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 + +/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ +/* set DDR of CLOCK as input to be slave */ +#define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ + PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ + UCSR1C = ((1 << UMSEL10) | \ + (3 << UPM10) | \ + (0 << USBS1) | \ + (3 << UCSZ10) | \ + (0 << UCPOL1)); \ + UCSR1A = 0; \ + UBRR1H = 0; \ + UBRR1L = 0; \ +} while (0) +#define PS2_USART_RX_INT_ON() do { \ + UCSR1B = ((1 << RXCIE1) | \ + (1 << RXEN1)); \ +} while (0) +#define PS2_USART_RX_POLL_ON() do { \ + UCSR1B = (1 << RXEN1); \ +} while (0) +#define PS2_USART_OFF() do { \ + UCSR1C = 0; \ + UCSR1B &= ~((1 << RXEN1) | \ + (1 << TXEN1)); \ +} while (0) +#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) +#define PS2_USART_RX_DATA UDR1 +#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) +#define PS2_USART_RX_VECT USART1_RX_vect +#endif +#endif + +#endif diff --git a/keyboard/onekey/keymap.c b/keyboard/onekey/keymap.c new file mode 100644 index 0000000000..dce4e9191e --- /dev/null +++ b/keyboard/onekey/keymap.c @@ -0,0 +1,66 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "action.h" +#include "action_macro.h" +#include "report.h" +#include "host.h" +#include "print.h" +#include "debug.h" +#include "keymap.h" + + +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + {{KC_A}}, +}; + +/* + * Fn action definition + */ +static const uint16_t PROGMEM fn_actions[] = { +}; + + + +#define KEYMAPS_SIZE (sizeof(keymaps) / sizeof(keymaps[0])) +#define FN_ACTIONS_SIZE (sizeof(fn_actions) / sizeof(fn_actions[0])) + +/* translates key to keycode */ +uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key) +{ + if (layer < KEYMAPS_SIZE) { + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); + } else { + // fall back to layer 0 + return pgm_read_byte(&keymaps[0][(key.row)][(key.col)]); + } +} + +/* translates Fn keycode to action */ +action_t keymap_fn_to_action(uint8_t keycode) +{ + action_t action; + if (FN_INDEX(keycode) < FN_ACTIONS_SIZE) { + action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); + } else { + action.code = ACTION_NO; + } + return action; +} diff --git a/keyboard/onekey/led.c b/keyboard/onekey/led.c new file mode 100644 index 0000000000..2d52fbf1c3 --- /dev/null +++ b/keyboard/onekey/led.c @@ -0,0 +1,25 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ +} diff --git a/keyboard/onekey/matrix.c b/keyboard/onekey/matrix.c new file mode 100644 index 0000000000..29df868321 --- /dev/null +++ b/keyboard/onekey/matrix.c @@ -0,0 +1,176 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* + * scan matrix + */ +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" + + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif +static uint8_t debouncing = DEBOUNCE; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } +} + +uint8_t matrix_scan(void) +{ + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i] != cols) { + matrix_debouncing[i] = cols; + if (debouncing) { + debug("bounce!: "); debug_hex(debouncing); debug("\n"); + } + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = matrix_debouncing[i]; + } + } + } + + return 1; +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + pbin_reverse16(matrix_get_row(row)); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +/* Column pin configuration + * col: 0 + * pin: B0 + */ +static void init_cols(void) +{ + // Input with pull-up(DDR:0, PORT:1) + DDRB &= ~(1<<0); + PORTB |= (1<<0); +} + +static matrix_row_t read_cols(void) +{ + return (PINB&(1<<0) ? 0 : (1<<0)); +} + +/* Row pin configuration + * row: 0 + * pin: B1 + */ +static void unselect_rows(void) +{ + // Hi-Z(DDR:0, PORT:0) to unselect + DDRB &= ~0b00000010; + PORTB &= ~0b00000010; +} + +static void select_row(uint8_t row) +{ + // Output low(DDR:1, PORT:0) to select + switch (row) { + case 0: + DDRB |= (1<<1); + PORTB &= ~(1<<1); + break; + } +} |