diff options
Diffstat (limited to 'keyboard/clueboard1')
| -rw-r--r-- | keyboard/clueboard1/Makefile | 137 | ||||
| -rw-r--r-- | keyboard/clueboard1/clueboard1.c | 27 | ||||
| -rw-r--r-- | keyboard/clueboard1/clueboard1.h | 52 | ||||
| -rw-r--r-- | keyboard/clueboard1/config.h | 86 | ||||
| -rw-r--r-- | keyboard/clueboard1/keymaps/keymap_default.c | 108 | ||||
| -rw-r--r-- | keyboard/clueboard1/led.c | 34 |
6 files changed, 444 insertions, 0 deletions
diff --git a/keyboard/clueboard1/Makefile b/keyboard/clueboard1/Makefile new file mode 100644 index 0000000000..767fc95efb --- /dev/null +++ b/keyboard/clueboard1/Makefile @@ -0,0 +1,137 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = clueboard1 + + +# Directory common source filess exist +TOP_DIR = ../.. +TMK_DIR = ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# # project specific files +SRC = clueboard1.c \ + led.c \ + +ifdef KEYMAP + SRC := keymaps/keymap_$(KEYMAP).c $(SRC) +else + SRC := keymaps/keymap_default.c $(SRC) +endif + +CONFIG_H = config.h + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +# MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = YES # MIDI controls +# UNICODE_ENABLE = YES # Unicode +# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID + + +# Optimize size but this may cause error "relocation truncated to fit" +#EXTRALDFLAGS = -Wl,--relax + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) +VPATH += $(TMK_DIR) + +include $(TOP_DIR)/quantum/quantum.mk diff --git a/keyboard/clueboard1/clueboard1.c b/keyboard/clueboard1/clueboard1.c new file mode 100644 index 0000000000..252c65fcc2 --- /dev/null +++ b/keyboard/clueboard1/clueboard1.c @@ -0,0 +1,27 @@ +#include "clueboard1.h" + +__attribute__ ((weak)) +void * matrix_init_user(void) { + // leave these blank +}; + +__attribute__ ((weak)) +void * matrix_scan_user(void) { + // leave these blank +}; + +void * matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + if (matrix_init_user) { + (*matrix_init_user)(); + } +}; + +void * matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + if (matrix_scan_user) { + (*matrix_scan_user)(); + } +}; diff --git a/keyboard/clueboard1/clueboard1.h b/keyboard/clueboard1/clueboard1.h new file mode 100644 index 0000000000..1572ea2fdc --- /dev/null +++ b/keyboard/clueboard1/clueboard1.h @@ -0,0 +1,52 @@ +#ifndef CLUEBOARD1_H +#define CLUEBOARD1_H + +#include "matrix.h" +#include "keymap_common.h" +#include <stddef.h> + + +/* Clueboard matrix layout + * ,-----------------------------------------------------------. ,---. + * | 00| 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E| | 0F| + * |-----------------------------------------------------------| |---| + * | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| 1C| 1D| | 1F| + * |-----------------------------------------------------------| `---' + * | 20| 21| 22| 23| 24| 25| 26| 27| 28| 29| 2A| 2B| 2C| 2D| + * |------------------------------------------------------------. + * | 30| 31| 32| 33| 34| 35| 36| 37| 38| 39| 3A| 3B| 3C| 3D|3E| + * |------------------------------------------------------------------. + * | 40| 41| 42| 43| 45| 46| 49| 4A| 4B| 4C| 4D| 4E| 4F| + * `------------------------------------------------------------------' + * ,-----------------------------------------------------------. ,---. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Yen| BS| |Ins| + * |-----------------------------------------------------------| |---| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| + * |-----------------------------------------------------------| `---' + * |Caps | A| S| D| F| G| H| J| k| L| ;| '| # | Ent| + * |--------------------------------------------------------------. + * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| + * |------------------------------------------------------------------. + * |Ctrl|Alt|Gui |MHen| Space| Space|Henk|Gui |Ctrl| Fn|Left|Down|Rgt| + * `------------------------------------------------------------------' + */ +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k43, k45, k46, k49, k4A, k4B, k4C, k4D, k4E, k4F \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, KC_NO, k45, k46, KC_NO, KC_NO, k49, k4A, k4B, k4C, k4D, k4E, k4F } \ +} + +void * matrix_init_user(void); +void * matrix_scan_user(void); + +#endif diff --git a/keyboard/clueboard1/config.h b/keyboard/clueboard1/config.h new file mode 100644 index 0000000000..01212078f1 --- /dev/null +++ b/keyboard/clueboard1/config.h @@ -0,0 +1,86 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC1ED +#define PRODUCT_ID 0x2301 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Clueboard +#define PRODUCT Clueboard +#define DESCRIPTION QMK keyboard firmware for Clueboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +// COLS: Left to right, ROWS: Top to bottom + +/* Column pin configuration + * col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + * pin: B3 F1 F4 F5 F6 C7 C6 B6 B5 B4 D7 D6 D4 F7 B0 B1 + */ +#define COLS (int []){ B3, F1, F4, F5, F6, C7, C6, B6, B5, B4, D7, D6, D4, F7, B0, B1 } + + /* Row pin configuration + * row: 0 1 2 3 4 + * pin: D1 D0 D2 D5 D3 + */ +#define ROWS (int []){ D1, D0, D2, D5, D3 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboard/clueboard1/keymaps/keymap_default.c b/keyboard/clueboard1/keymaps/keymap_default.c new file mode 100644 index 0000000000..bee7e35a07 --- /dev/null +++ b/keyboard/clueboard1/keymaps/keymap_default.c @@ -0,0 +1,108 @@ +#include "clueboard1.h" + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 +#define _RS 2 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,--------------------------------------------------------------------------. ,----. + * |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP| + * |--------------------------------------------------------------------------| |----| + * | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN| + * |--------------------------------------------------------------------------| `----' + * |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent| + * |-----------------------------------------------------------------------------. + * |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP| + * |------------------------------------------------------------------------|----|----. + * | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT| + * `----------------------------------------------------------------------------------' + */ +[_BL] = KEYMAP( + F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \ + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap _FL: Function Layer + * ,--------------------------------------------------------------------------. ,----. + * | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN| + * |--------------------------------------------------------------------------| |----| + * | | | | | | | | |PScr|SLck|Paus| | | | |BLDE| + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | |PGUP| + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL|HOME|PGDN| END| + * `----------------------------------------------------------------------------------' + */ +[_FL] = KEYMAP( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_INC, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, \ + KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END), + + /* Keymap _RS: Reset layer + * ,--------------------------------------------------------------------------. ,----. + * | | | | | | | | | | | | | | | | | | + * |--------------------------------------------------------------------------| |----| + * | | | | |RESET| | | | | | | | | | | | + * |--------------------------------------------------------------------------| `----' + * | | | _RS| | | | | | | | | | | | + * |-----------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | | + * |------------------------------------------------------------------------|----|----. + * | | | | | | | | | | _FL| | | | + * `----------------------------------------------------------------------------------' + */ +[_RS] = KEYMAP( + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_TRNS, KC_TRNS, KC_TRNS), +}; + +enum function_id { + SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + [0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +} diff --git a/keyboard/clueboard1/led.c b/keyboard/clueboard1/led.c new file mode 100644 index 0000000000..deb7143eec --- /dev/null +++ b/keyboard/clueboard1/led.c @@ -0,0 +1,34 @@ + /* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <avr/io.h> +#include "stdint.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output low + DDRB |= (1<<2); + PORTB &= ~(1<<2); + } else { + // Hi-Z + DDRB &= ~(1<<2); + PORTB &= ~(1<<2); + } +} |