summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/bluetooth/bluefruit_le.cpp26
-rw-r--r--drivers/bluetooth/outputselect.c2
-rw-r--r--drivers/bluetooth/rn42.c8
-rw-r--r--drivers/eeprom/eeprom_driver.c12
-rw-r--r--drivers/eeprom/eeprom_i2c.c6
-rw-r--r--drivers/eeprom/eeprom_spi.c12
-rw-r--r--drivers/eeprom/eeprom_transient.c8
-rw-r--r--drivers/eeprom/eeprom_transient.h2
-rw-r--r--drivers/flash/flash_spi.c12
-rw-r--r--drivers/gpio/mcp23018.c6
-rw-r--r--drivers/haptic/DRV2605L.c6
-rw-r--r--drivers/haptic/solenoid.c20
-rw-r--r--drivers/lcd/st7565.c25
-rw-r--r--drivers/lcd/st7565.h8
-rw-r--r--drivers/led/apa102.c10
-rw-r--r--drivers/led/aw20216.c14
-rw-r--r--drivers/led/issi/is31fl3731-simple.c6
-rw-r--r--drivers/led/issi/is31fl3731.c6
-rw-r--r--drivers/led/issi/is31fl3733-simple.c20
-rw-r--r--drivers/led/issi/is31fl3733-simple.h14
-rw-r--r--drivers/led/issi/is31fl3733.c20
-rw-r--r--drivers/led/issi/is31fl3733.h14
-rw-r--r--drivers/led/issi/is31fl3736.c20
-rw-r--r--drivers/led/issi/is31fl3736.h16
-rw-r--r--drivers/led/issi/is31fl3737.c20
-rw-r--r--drivers/led/issi/is31fl3737.h16
-rw-r--r--drivers/led/issi/is31fl3741.c20
-rw-r--r--drivers/led/issi/is31fl3741.h16
-rw-r--r--drivers/oled/oled_driver.h22
-rw-r--r--drivers/oled/ssd1306_sh1106.c49
-rw-r--r--drivers/ps2/ps2_busywait.c6
-rw-r--r--drivers/ps2/ps2_interrupt.c16
-rw-r--r--drivers/ps2/ps2_mouse.c28
-rw-r--r--drivers/sensors/adns5050.c10
-rw-r--r--drivers/sensors/adns9800.c4
-rw-r--r--drivers/sensors/analog_joystick.c2
-rw-r--r--drivers/sensors/cirque_pinnacle.c38
-rw-r--r--drivers/sensors/cirque_pinnacle.h8
-rw-r--r--drivers/sensors/cirque_pinnacle_i2c.c4
-rw-r--r--drivers/sensors/cirque_pinnacle_spi.c10
-rw-r--r--drivers/sensors/pimoroni_trackball.c4
-rw-r--r--drivers/sensors/pmw3360.c14
-rw-r--r--drivers/sensors/pmw3360.h8
-rw-r--r--drivers/sensors/pmw3389.c14
-rw-r--r--drivers/sensors/pmw3389.h8
-rw-r--r--drivers/usb2422.c14
-rw-r--r--drivers/ws2812.h8
47 files changed, 365 insertions, 267 deletions
diff --git a/drivers/bluetooth/bluefruit_le.cpp b/drivers/bluetooth/bluefruit_le.cpp
index 86581a1a48..19310767cf 100644
--- a/drivers/bluetooth/bluefruit_le.cpp
+++ b/drivers/bluetooth/bluefruit_le.cpp
@@ -29,7 +29,7 @@
#endif
#ifndef BLUEFRUIT_LE_SCK_DIVISOR
-# define BLUEFRUIT_LE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE
+# define BLUEFRUIT_LE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE
#endif
#define SAMPLE_BATTERY
@@ -77,10 +77,10 @@ struct sdep_msg {
// information here.
enum queue_type {
- QTKeyReport, // 1-byte modifier + 6-byte key report
- QTConsumer, // 16-bit key code
+ QTKeyReport, // 1-byte modifier + 6-byte key report
+ QTConsumer, // 16-bit key code
#ifdef MOUSE_ENABLE
- QTMouseMove, // 4-byte mouse report
+ QTMouseMove, // 4-byte mouse report
#endif
};
@@ -115,8 +115,8 @@ enum sdep_type {
SdepResponse = 0x20,
SdepAlert = 0x40,
SdepError = 0x80,
- SdepSlaveNotReady = 0xFE, // Try again later
- SdepSlaveOverflow = 0xFF, // You read more data than is available
+ SdepSlaveNotReady = 0xFE, // Try again later
+ SdepSlaveOverflow = 0xFF, // You read more data than is available
};
enum ble_cmd {
@@ -306,13 +306,15 @@ static bool ble_init(void) {
wait_ms(10);
writePinHigh(BLUEFRUIT_LE_RST_PIN);
- wait_ms(1000); // Give it a second to initialize
+ wait_ms(1000); // Give it a second to initialize
state.initialized = true;
return state.initialized;
}
-static inline uint8_t min(uint8_t a, uint8_t b) { return a < b ? a : b; }
+static inline uint8_t min(uint8_t a, uint8_t b) {
+ return a < b ? a : b;
+}
static bool read_response(char *resp, uint16_t resplen, bool verbose) {
char *dest = resp;
@@ -424,7 +426,9 @@ bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool verbose) {
return at_command(cmdbuf, resp, resplen, verbose);
}
-bool bluefruit_le_is_connected(void) { return state.is_connected; }
+bool bluefruit_le_is_connected(void) {
+ return state.is_connected;
+}
bool bluefruit_le_enable_keyboard(void) {
char resbuf[128];
@@ -671,7 +675,9 @@ void bluefruit_le_send_mouse_move(int8_t x, int8_t y, int8_t scroll, int8_t pan,
}
#endif
-uint32_t bluefruit_le_read_battery_voltage(void) { return state.vbat; }
+uint32_t bluefruit_le_read_battery_voltage(void) {
+ return state.vbat;
+}
bool bluefruit_le_set_mode_leds(bool on) {
if (!state.configured) {
diff --git a/drivers/bluetooth/outputselect.c b/drivers/bluetooth/outputselect.c
index 44bc4a9aa3..b986ba274e 100644
--- a/drivers/bluetooth/outputselect.c
+++ b/drivers/bluetooth/outputselect.c
@@ -52,7 +52,7 @@ uint8_t auto_detect_output(void) {
#endif
#ifdef BLUETOOTH_ENABLE
- return OUTPUT_BLUETOOTH; // should check if BT is connected here
+ return OUTPUT_BLUETOOTH; // should check if BT is connected here
#endif
return OUTPUT_NONE;
diff --git a/drivers/bluetooth/rn42.c b/drivers/bluetooth/rn42.c
index 2ef40bb7e0..5d497cda20 100644
--- a/drivers/bluetooth/rn42.c
+++ b/drivers/bluetooth/rn42.c
@@ -61,7 +61,9 @@ static inline uint16_t rn42_consumer_usage_to_bitmap(uint16_t usage) {
}
}
-void rn42_init(void) { uart_init(RN42_BAUD_RATE); }
+void rn42_init(void) {
+ uart_init(RN42_BAUD_RATE);
+}
void rn42_send_keyboard(report_keyboard_t *report) {
uart_write(0xFD);
@@ -81,8 +83,8 @@ void rn42_send_mouse(report_mouse_t *report) {
uart_write(report->buttons);
uart_write(report->x);
uart_write(report->y);
- uart_write(report->v); // should try sending the wheel v here
- uart_write(report->h); // should try sending the wheel h here
+ uart_write(report->v); // should try sending the wheel v here
+ uart_write(report->h); // should try sending the wheel h here
uart_write(0x00);
}
diff --git a/drivers/eeprom/eeprom_driver.c b/drivers/eeprom/eeprom_driver.c
index 6ce47faf7d..885cf21981 100644
--- a/drivers/eeprom/eeprom_driver.c
+++ b/drivers/eeprom/eeprom_driver.c
@@ -37,11 +37,17 @@ uint32_t eeprom_read_dword(const uint32_t *addr) {
return ret;
}
-void eeprom_write_byte(uint8_t *addr, uint8_t value) { eeprom_write_block(&value, addr, 1); }
+void eeprom_write_byte(uint8_t *addr, uint8_t value) {
+ eeprom_write_block(&value, addr, 1);
+}
-void eeprom_write_word(uint16_t *addr, uint16_t value) { eeprom_write_block(&value, addr, 2); }
+void eeprom_write_word(uint16_t *addr, uint16_t value) {
+ eeprom_write_block(&value, addr, 2);
+}
-void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_block(&value, addr, 4); }
+void eeprom_write_dword(uint32_t *addr, uint32_t value) {
+ eeprom_write_block(&value, addr, 4);
+}
void eeprom_update_block(const void *buf, void *addr, size_t len) {
uint8_t read_buf[len];
diff --git a/drivers/eeprom/eeprom_i2c.c b/drivers/eeprom/eeprom_i2c.c
index 8e80ff544f..a74a010415 100644
--- a/drivers/eeprom/eeprom_i2c.c
+++ b/drivers/eeprom/eeprom_i2c.c
@@ -43,7 +43,7 @@
#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
# include "timer.h"
# include "debug.h"
-#endif // DEBUG_EEPROM_OUTPUT
+#endif // DEBUG_EEPROM_OUTPUT
static inline void fill_target_address(uint8_t *buffer, const void *addr) {
uintptr_t p = (uintptr_t)addr;
@@ -91,7 +91,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
}
dprintf("\n");
-#endif // DEBUG_EEPROM_OUTPUT
+#endif // DEBUG_EEPROM_OUTPUT
}
void eeprom_write_block(const void *buf, void *addr, size_t len) {
@@ -122,7 +122,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
dprintf(" %02X", (int)(read_buf[i]));
}
dprintf("\n");
-#endif // DEBUG_EEPROM_OUTPUT
+#endif // DEBUG_EEPROM_OUTPUT
i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100);
wait_ms(EXTERNAL_EEPROM_WRITE_TIME);
diff --git a/drivers/eeprom/eeprom_spi.c b/drivers/eeprom/eeprom_spi.c
index e273090854..25955498c4 100644
--- a/drivers/eeprom/eeprom_spi.c
+++ b/drivers/eeprom/eeprom_spi.c
@@ -52,7 +52,9 @@
# define EXTERNAL_EEPROM_SPI_TIMEOUT 100
#endif
-static bool spi_eeprom_start(void) { return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); }
+static bool spi_eeprom_start(void) {
+ return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR);
+}
static spi_status_t spi_eeprom_wait_while_busy(int timeout) {
uint32_t deadline = timer_read32() + timeout;
@@ -80,7 +82,9 @@ static void spi_eeprom_transmit_address(uintptr_t addr) {
//----------------------------------------------------------------------------------------------------------------------
-void eeprom_driver_init(void) { spi_init(); }
+void eeprom_driver_init(void) {
+ spi_init();
+}
void eeprom_driver_erase(void) {
#if defined(CONSOLE_ENABLE) && defined(DEBUG_EEPROM_OUTPUT)
@@ -135,7 +139,7 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) {
dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
}
dprintf("\n");
-#endif // DEBUG_EEPROM_OUTPUT
+#endif // DEBUG_EEPROM_OUTPUT
spi_stop();
}
@@ -192,7 +196,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) {
dprintf(" %02X", (int)(uint8_t)(read_buf[i]));
}
dprintf("\n");
-#endif // DEBUG_EEPROM_OUTPUT
+#endif // DEBUG_EEPROM_OUTPUT
spi_write(CMD_WRITE);
spi_eeprom_transmit_address(target_addr);
diff --git a/drivers/eeprom/eeprom_transient.c b/drivers/eeprom/eeprom_transient.c
index b4c78c6f40..9dc4289c27 100644
--- a/drivers/eeprom/eeprom_transient.c
+++ b/drivers/eeprom/eeprom_transient.c
@@ -30,9 +30,13 @@ size_t clamp_length(intptr_t offset, size_t len) {
return len;
}
-void eeprom_driver_init(void) { eeprom_driver_erase(); }
+void eeprom_driver_init(void) {
+ eeprom_driver_erase();
+}
-void eeprom_driver_erase(void) { memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); }
+void eeprom_driver_erase(void) {
+ memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE);
+}
void eeprom_read_block(void *buf, const void *addr, size_t len) {
intptr_t offset = (intptr_t)addr;
diff --git a/drivers/eeprom/eeprom_transient.h b/drivers/eeprom/eeprom_transient.h
index d06189b246..687b8619fe 100644
--- a/drivers/eeprom/eeprom_transient.h
+++ b/drivers/eeprom/eeprom_transient.h
@@ -21,5 +21,5 @@
*/
#ifndef TRANSIENT_EEPROM_SIZE
# include "eeconfig.h"
-# define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
+# define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
#endif
diff --git a/drivers/flash/flash_spi.c b/drivers/flash/flash_spi.c
index 2fa8891e38..f4cbf65159 100644
--- a/drivers/flash/flash_spi.c
+++ b/drivers/flash/flash_spi.c
@@ -65,7 +65,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define DEBUG_FLASH_SPI_OUTPUT
-static bool spi_flash_start(void) { return spi_start(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN, EXTERNAL_FLASH_SPI_LSBFIRST, EXTERNAL_FLASH_SPI_MODE, EXTERNAL_FLASH_SPI_CLOCK_DIVISOR); }
+static bool spi_flash_start(void) {
+ return spi_start(EXTERNAL_FLASH_SPI_SLAVE_SELECT_PIN, EXTERNAL_FLASH_SPI_LSBFIRST, EXTERNAL_FLASH_SPI_MODE, EXTERNAL_FLASH_SPI_CLOCK_DIVISOR);
+}
static flash_status_t spi_flash_wait_while_busy(void) {
uint32_t deadline = timer_read32() + EXTERNAL_FLASH_SPI_TIMEOUT;
@@ -160,7 +162,9 @@ static flash_status_t spi_flash_transaction(uint8_t cmd, uint32_t addr, uint8_t
return response;
}
-void flash_init(void) { spi_init(); }
+void flash_init(void) {
+ spi_init();
+}
flash_status_t flash_erase_chip(void) {
flash_status_t response = FLASH_STATUS_SUCCESS;
@@ -304,7 +308,7 @@ flash_status_t flash_read_block(uint32_t addr, void *buf, size_t len) {
dprintf(" %02X", (int)(((uint8_t *)read_buf)[i]));
}
dprintf("\n");
-#endif // DEBUG_FLASH_SPI_OUTPUT
+#endif // DEBUG_FLASH_SPI_OUTPUT
return response;
}
@@ -340,7 +344,7 @@ flash_status_t flash_write_block(uint32_t addr, const void *buf, size_t len) {
dprintf(" %02X", (int)(uint8_t)(write_buf[i]));
}
dprintf("\n");
-#endif // DEBUG_FLASH_SPI_OUTPUT
+#endif // DEBUG_FLASH_SPI_OUTPUT
/* Perform the write. */
response = spi_flash_transaction(FLASH_CMD_PP, addr, write_buf, write_length);
diff --git a/drivers/gpio/mcp23018.c b/drivers/gpio/mcp23018.c
index dc8ab03c50..41cbfe087e 100644
--- a/drivers/gpio/mcp23018.c
+++ b/drivers/gpio/mcp23018.c
@@ -10,11 +10,11 @@
#define TIMEOUT 100
enum {
- CMD_IODIRA = 0x00, // i/o direction register
+ CMD_IODIRA = 0x00, // i/o direction register
CMD_IODIRB = 0x01,
- CMD_GPPUA = 0x0C, // GPIO pull-up resistor register
+ CMD_GPPUA = 0x0C, // GPIO pull-up resistor register
CMD_GPPUB = 0x0D,
- CMD_GPIOA = 0x12, // general purpose i/o port register (write modifies OLAT)
+ CMD_GPIOA = 0x12, // general purpose i/o port register (write modifies OLAT)
CMD_GPIOB = 0x13,
};
diff --git a/drivers/haptic/DRV2605L.c b/drivers/haptic/DRV2605L.c
index 5de2b354c9..5a1d2ca0af 100644
--- a/drivers/haptic/DRV2605L.c
+++ b/drivers/haptic/DRV2605L.c
@@ -106,12 +106,14 @@ void DRV_init(void) {
void DRV_rtp_init(void) {
DRV_write(DRV_GO, 0x00);
- DRV_write(DRV_RTP_INPUT, 20); // 20 is the lowest value I've found where haptics can still be felt.
+ DRV_write(DRV_RTP_INPUT, 20); // 20 is the lowest value I've found where haptics can still be felt.
DRV_write(DRV_MODE, 0x05);
DRV_write(DRV_GO, 0x01);
}
-void DRV_amplitude(uint8_t amplitude) { DRV_write(DRV_RTP_INPUT, amplitude); }
+void DRV_amplitude(uint8_t amplitude) {
+ DRV_write(DRV_RTP_INPUT, amplitude);
+}
void DRV_pulse(uint8_t sequence) {
DRV_write(DRV_GO, 0x00);
diff --git a/drivers/haptic/solenoid.c b/drivers/haptic/solenoid.c
index 7a09940f78..14d868bffe 100644
--- a/drivers/haptic/solenoid.c
+++ b/drivers/haptic/solenoid.c
@@ -28,13 +28,21 @@ uint8_t solenoid_dwell = SOLENOID_DEFAULT_DWELL;
extern haptic_config_t haptic_config;
-void solenoid_buzz_on(void) { haptic_set_buzz(1); }
+void solenoid_buzz_on(void) {
+ haptic_set_buzz(1);
+}
-void solenoid_buzz_off(void) { haptic_set_buzz(0); }
+void solenoid_buzz_off(void) {
+ haptic_set_buzz(0);
+}
-void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); }
+void solenoid_set_buzz(int buzz) {
+ haptic_set_buzz(buzz);
+}
-void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; }
+void solenoid_set_dwell(uint8_t dwell) {
+ solenoid_dwell = dwell;
+}
void solenoid_stop(void) {
SOLENOID_PIN_WRITE_INACTIVE();
@@ -89,4 +97,6 @@ void solenoid_setup(void) {
}
}
-void solenoid_shutdown(void) { SOLENOID_PIN_WRITE_INACTIVE(); }
+void solenoid_shutdown(void) {
+ SOLENOID_PIN_WRITE_INACTIVE();
+}
diff --git a/drivers/lcd/st7565.c b/drivers/lcd/st7565.c
index 49b13c00f1..47ee02804b 100644
--- a/drivers/lcd/st7565.c
+++ b/drivers/lcd/st7565.c
@@ -39,7 +39,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// Addressing Setting Commands
#define PAM_SETCOLUMN_LSB 0x00
#define PAM_SETCOLUMN_MSB 0x10
-#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7
+#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7
// Hardware Configuration Commands
#define DISPLAY_START_LINE 0x40
@@ -138,7 +138,9 @@ bool st7565_init(display_rotation_t rotation) {
return true;
}
-__attribute__((weak)) display_rotation_t st7565_init_user(display_rotation_t rotation) { return rotation; }
+__attribute__((weak)) display_rotation_t st7565_init_user(display_rotation_t rotation) {
+ return rotation;
+}
void st7565_clear(void) {
memset(st7565_buffer, 0, sizeof(st7565_buffer));
@@ -212,7 +214,8 @@ void st7565_advance_page(bool clearPageRemainder) {
remaining = remaining / ST7565_FONT_WIDTH;
// Write empty character until next line
- while (remaining--) st7565_write_char(' ', false);
+ while (remaining--)
+ st7565_write_char(' ', false);
} else {
// Next page index out of bounds?
if (index + remaining >= ST7565_MATRIX_SIZE) {
@@ -263,7 +266,7 @@ void st7565_write_char(const char data, bool invert) {
_Static_assert(sizeof(font) >= ((ST7565_FONT_END + 1 - ST7565_FONT_START) * ST7565_FONT_WIDTH), "ST7565_FONT_END references outside array");
// set the reder buffer data
- uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
+ uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
if (cast_data < ST7565_FONT_START || cast_data > ST7565_FONT_END) {
memset(st7565_cursor, 0x00, ST7565_FONT_WIDTH);
} else {
@@ -389,7 +392,7 @@ void st7565_write_raw_P(const char *data, uint16_t size) {
st7565_dirty |= ((ST7565_BLOCK_TYPE)1 << (i / ST7565_BLOCK_SIZE));
}
}
-#endif // defined(__AVR__)
+#endif // defined(__AVR__)
bool st7565_on(void) {
if (!st7565_initialized) {
@@ -429,7 +432,9 @@ bool st7565_off(void) {
__attribute__((weak)) void st7565_off_user(void) {}
-bool st7565_is_on(void) { return st7565_active; }
+bool st7565_is_on(void) {
+ return st7565_active;
+}
bool st7565_invert(bool invert) {
if (!st7565_initialized) {
@@ -445,9 +450,13 @@ bool st7565_invert(bool invert) {
return st7565_inverted;
}
-uint8_t st7565_max_chars(void) { return ST7565_DISPLAY_WIDTH / ST7565_FONT_WIDTH; }
+uint8_t st7565_max_chars(void) {
+ return ST7565_DISPLAY_WIDTH / ST7565_FONT_WIDTH;
+}
-uint8_t st7565_max_lines(void) { return ST7565_DISPLAY_HEIGHT / ST7565_FONT_HEIGHT; }
+uint8_t st7565_max_lines(void) {
+ return ST7565_DISPLAY_HEIGHT / ST7565_FONT_HEIGHT;
+}
void st7565_task(void) {
if (!st7565_initialized) {
diff --git a/drivers/lcd/st7565.h b/drivers/lcd/st7565.h
index d453dbe6da..0e42c8765b 100644
--- a/drivers/lcd/st7565.h
+++ b/drivers/lcd/st7565.h
@@ -29,16 +29,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define ST7565_DISPLAY_HEIGHT 32
#endif
#ifndef ST7565_MATRIX_SIZE
-# define ST7565_MATRIX_SIZE (ST7565_DISPLAY_HEIGHT / 8 * ST7565_DISPLAY_WIDTH) // 1024 (compile time mathed)
+# define ST7565_MATRIX_SIZE (ST7565_DISPLAY_HEIGHT / 8 * ST7565_DISPLAY_WIDTH) // 1024 (compile time mathed)
#endif
#ifndef ST7565_BLOCK_TYPE
# define ST7565_BLOCK_TYPE uint16_t
#endif
#ifndef ST7565_BLOCK_COUNT
-# define ST7565_BLOCK_COUNT (sizeof(ST7565_BLOCK_TYPE) * 8) // 32 (compile time mathed)
+# define ST7565_BLOCK_COUNT (sizeof(ST7565_BLOCK_TYPE) * 8) // 32 (compile time mathed)
#endif
#ifndef ST7565_BLOCK_SIZE
-# define ST7565_BLOCK_SIZE (ST7565_MATRIX_SIZE / ST7565_BLOCK_COUNT) // 32 (compile time mathed)
+# define ST7565_BLOCK_SIZE (ST7565_MATRIX_SIZE / ST7565_BLOCK_COUNT) // 32 (compile time mathed)
#endif
// the column address corresponding to the first column in the display hardware
@@ -174,7 +174,7 @@ void st7565_write_raw_P(const char *data, uint16_t size);
# define st7565_write_P(data, invert) st7565_write(data, invert)
# define st7565_write_ln_P(data, invert) st7565_write_ln(data, invert)
# define st7565_write_raw_P(data, size) st7565_write_raw(data, size)
-#endif // defined(__AVR__)
+#endif // defined(__AVR__)
// Can be used to manually turn on the screen if it is off
// Returns true if the screen was on or turns on
diff --git a/drivers/led/apa102.c b/drivers/led/apa102.c
index 00e7eb4505..f291948975 100644
--- a/drivers/led/apa102.c
+++ b/drivers/led/apa102.c
@@ -20,15 +20,15 @@
#ifndef APA102_NOPS
# if defined(__AVR__)
-# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed
+# define APA102_NOPS 0 // AVR at 16 MHz already spends 62.5 ns per clock, so no extra delay is needed
# elif defined(PROTOCOL_CHIBIOS)
# include "hal.h"
# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) || defined(GD32VF103)
-# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns
+# define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns
# else
# error("APA102_NOPS configuration required")
-# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot
+# define APA102_NOPS 0 // this just pleases the compile so the above error is easier to spot
# endif
# endif
#endif
@@ -72,7 +72,9 @@ void apa102_setleds(LED_TYPE *start_led, uint16_t num_leds) {
}
// Overwrite the default rgblight_call_driver to use apa102 driver
-void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) { apa102_setleds(start_led, num_leds); }
+void rgblight_call_driver(LED_TYPE *start_led, uint8_t num_leds) {
+ apa102_setleds(start_led, num_leds);
+}
void static apa102_init(void) {
setPinOutput(RGB_DI_PIN);
diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c
index 2c7ff8f088..59389cdcd6 100644
--- a/drivers/led/aw20216.c
+++ b/drivers/led/aw20216.c
@@ -23,17 +23,17 @@
*/
#define AWINIC_ID 0b1010 << 4
-#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers
-#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control
-#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control
-#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice?
-#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control?
+#define AW_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers
+#define AW_PAGE_PWM 0x01 << 1 // PG1, LED PWM control
+#define AW_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control
+#define AW_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice?
+#define AW_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control?
#define AW_WRITE 0
#define AW_READ 1
-#define AW_REG_CONFIGURATION 0x00 // PG0
-#define AW_REG_GLOBALCURRENT 0x01 // PG0
+#define AW_REG_CONFIGURATION 0x00 // PG0
+#define AW_REG_GLOBALCURRENT 0x01 // PG0
// Default value of AW_REG_CONFIGURATION
// D7:D4 = 1011, SWSEL (SW1~SW12 active)
diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c
index f51e2e38af..3abe9ea337 100644
--- a/drivers/led/issi/is31fl3731-simple.c
+++ b/drivers/led/issi/is31fl3731-simple.c
@@ -42,13 +42,13 @@
#define ISSI_REG_PICTUREFRAME 0x01
// Not defined in the datasheet -- See AN for IC
-#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
+#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
#define ISSI_REG_SHUTDOWN 0x0A
#define ISSI_REG_AUDIOSYNC 0x06
#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
+#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
@@ -148,7 +148,7 @@ void IS31FL3731_init(uint8_t addr) {
// enable software shutdown
IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
-#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
+#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10);
#endif
diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c
index e6190a6b90..9c6c29f081 100644
--- a/drivers/led/issi/is31fl3731.c
+++ b/drivers/led/issi/is31fl3731.c
@@ -41,13 +41,13 @@
#define ISSI_REG_PICTUREFRAME 0x01
// Not defined in the datasheet -- See AN for IC
-#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
+#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
#define ISSI_REG_SHUTDOWN 0x0A
#define ISSI_REG_AUDIOSYNC 0x06
#define ISSI_COMMANDREGISTER 0xFD
-#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
+#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
@@ -136,7 +136,7 @@ void IS31FL3731_init(uint8_t addr) {
// enable software shutdown
IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
-#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
+#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array
IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10);
#endif
diff --git a/drivers/led/issi/is31fl3733-simple.c b/drivers/led/issi/is31fl3733-simple.c
index 777895bf89..af006f756d 100644
--- a/drivers/led/issi/is31fl3733-simple.c
+++ b/drivers/led/issi/is31fl3733-simple.c
@@ -39,16 +39,16 @@
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01 // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03 // PG3
+#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
+#define ISSI_PAGE_PWM 0x01 // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
+#define ISSI_PAGE_FUNCTION 0x03 // PG3
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11 // PG3
-#define ISSI_REG_SWPULLUP 0x0F // PG3
-#define ISSI_REG_CSPULLUP 0x10 // PG3
+#define ISSI_REG_CONFIGURATION 0x00 // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
+#define ISSI_REG_RESET 0x11 // PG3
+#define ISSI_REG_SWPULLUP 0x0F // PG3
+#define ISSI_REG_CSPULLUP 0x10 // PG3
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
@@ -59,7 +59,7 @@
#endif
#ifndef ISSI_PWM_FREQUENCY
-# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
+# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
#endif
#ifndef ISSI_SWPULLUP
diff --git a/drivers/led/issi/is31fl3733-simple.h b/drivers/led/issi/is31fl3733-simple.h
index f071db5e40..f5253e3101 100644
--- a/drivers/led/issi/is31fl3733-simple.h
+++ b/drivers/led/issi/is31fl3733-simple.h
@@ -47,13 +47,13 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool value);
void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index);
void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
-#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
-#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
-#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
-#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
-#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+#define PUR_0R 0x00 // No PUR resistor
+#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
+#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
+#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
+#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
+#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
+#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
#define A_1 0x00
#define A_2 0x01
diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c
index 696491d070..a2fdaa90fa 100644
--- a/drivers/led/issi/is31fl3733.c
+++ b/drivers/led/issi/is31fl3733.c
@@ -38,16 +38,16 @@
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01 // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03 // PG3
+#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
+#define ISSI_PAGE_PWM 0x01 // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
+#define ISSI_PAGE_FUNCTION 0x03 // PG3
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11 // PG3
-#define ISSI_REG_SWPULLUP 0x0F // PG3
-#define ISSI_REG_CSPULLUP 0x10 // PG3
+#define ISSI_REG_CONFIGURATION 0x00 // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
+#define ISSI_REG_RESET 0x11 // PG3
+#define ISSI_REG_SWPULLUP 0x0F // PG3
+#define ISSI_REG_CSPULLUP 0x10 // PG3
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
@@ -58,7 +58,7 @@
#endif
#ifndef ISSI_PWM_FREQUENCY
-# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
+# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
#endif
#ifndef ISSI_SWPULLUP
diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h
index c5d62fed85..7653dd17c0 100644
--- a/drivers/led/issi/is31fl3733.h
+++ b/drivers/led/issi/is31fl3733.h
@@ -48,13 +48,13 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index);
void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
-#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
-#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
-#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
-#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
-#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+#define PUR_0R 0x00 // No PUR resistor
+#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
+#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
+#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
+#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
+#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
+#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
#define A_1 0x00
#define A_2 0x01
diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c
index c9a871118d..7752a3f6cb 100644
--- a/drivers/led/issi/is31fl3736.c
+++ b/drivers/led/issi/is31fl3736.c
@@ -36,16 +36,16 @@
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01 // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03 // PG3
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11 // PG3
-#define ISSI_REG_SWPULLUP 0x0F // PG3
-#define ISSI_REG_CSPULLUP 0x10 // PG3
+#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
+#define ISSI_PAGE_PWM 0x01 // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
+#define ISSI_PAGE_FUNCTION 0x03 // PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
+#define ISSI_REG_RESET 0x11 // PG3
+#define ISSI_REG_SWPULLUP 0x0F // PG3
+#define ISSI_REG_CSPULLUP 0x10 // PG3
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h
index 9fbe1cc577..f126034615 100644
--- a/drivers/led/issi/is31fl3736.h
+++ b/drivers/led/issi/is31fl3736.h
@@ -61,14 +61,14 @@ void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled);
void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x01 // 0.5k Ohm resistor
-#define PUR_1KR 0x02 // 1.0k Ohm resistor
-#define PUR_2KR 0x03 // 2.0k Ohm resistor
-#define PUR_4KR 0x04 // 4.0k Ohm resistor
-#define PUR_8KR 0x05 // 8.0k Ohm resistor
-#define PUR_16KR 0x06 // 16k Ohm resistor
-#define PUR_32KR 0x07 // 32k Ohm resistor
+#define PUR_0R 0x00 // No PUR resistor
+#define PUR_05KR 0x01 // 0.5k Ohm resistor
+#define PUR_1KR 0x02 // 1.0k Ohm resistor
+#define PUR_2KR 0x03 // 2.0k Ohm resistor
+#define PUR_4KR 0x04 // 4.0k Ohm resistor
+#define PUR_8KR 0x05 // 8.0k Ohm resistor
+#define PUR_16KR 0x06 // 16k Ohm resistor
+#define PUR_32KR 0x07 // 32k Ohm resistor
#define A_1 0x00
#define A_2 0x02
diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c
index 0722e18869..9f2a13de45 100644
--- a/drivers/led/issi/is31fl3737.c
+++ b/drivers/led/issi/is31fl3737.c
@@ -38,16 +38,16 @@
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
-#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
-#define ISSI_PAGE_PWM 0x01 // PG1
-#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
-#define ISSI_PAGE_FUNCTION 0x03 // PG3
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG3
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
-#define ISSI_REG_RESET 0x11 // PG3
-#define ISSI_REG_SWPULLUP 0x0F // PG3
-#define ISSI_REG_CSPULLUP 0x10 // PG3
+#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
+#define ISSI_PAGE_PWM 0x01 // PG1
+#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
+#define ISSI_PAGE_FUNCTION 0x03 // PG3
+
+#define ISSI_REG_CONFIGURATION 0x00 // PG3
+#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
+#define ISSI_REG_RESET 0x11 // PG3
+#define ISSI_REG_SWPULLUP 0x0F // PG3
+#define ISSI_REG_CSPULLUP 0x10 // PG3
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h
index 31b1a22267..ddb70a9df5 100644
--- a/drivers/led/issi/is31fl3737.h
+++ b/drivers/led/issi/is31fl3737.h
@@ -48,14 +48,14 @@ void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bo
void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2);
void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL
-#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL
-#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL
-#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL
-#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL
-#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL
-#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
+#define PUR_0R 0x00 // No PUR resistor
+#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL
+#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL
+#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL
+#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL
+#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL
+#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL
+#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
#define A_1 0x00
#define A_2 0x01
diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c
index 8d347a5e60..393b0179b5 100644
--- a/drivers/led/issi/is31fl3741.c
+++ b/drivers/led/issi/is31fl3741.c
@@ -42,16 +42,16 @@
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
#define ISSI_IDREGISTER 0xFC
-#define ISSI_PAGE_PWM0 0x00 // PG0
-#define ISSI_PAGE_PWM1 0x01 // PG1
-#define ISSI_PAGE_SCALING_0 0x02 // PG2
-#define ISSI_PAGE_SCALING_1 0x03 // PG3
-#define ISSI_PAGE_FUNCTION 0x04 // PG4
-
-#define ISSI_REG_CONFIGURATION 0x00 // PG4
-#define ISSI_REG_GLOBALCURRENT 0x01 // PG4
-#define ISSI_REG_PULLDOWNUP 0x02 // PG4
-#define ISSI_REG_RESET 0x3F // PG4
+#define ISSI_PAGE_PWM0 0x00 // PG0
+#define ISSI_PAGE_PWM1 0x01 // PG1
+#define ISSI_PAGE_SCALING_0 0x02 // PG2
+#define ISSI_PAGE_SCALING_1 0x03 // PG3
+#define ISSI_PAGE_FUNCTION 0x04 // PG4
+
+#define ISSI_REG_CONFIGURATION 0x00 // PG4
+#define ISSI_REG_GLOBALCURRENT 0x01 // PG4
+#define ISSI_REG_PULLDOWNUP 0x02 // PG4
+#define ISSI_REG_RESET 0x3F // PG4
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
diff --git a/drivers/led/issi/is31fl3741.h b/drivers/led/issi/is31fl3741.h
index 8154f8be70..3bdb23bd2d 100644
--- a/drivers/led/issi/is31fl3741.h
+++ b/drivers/led/issi/is31fl3741.h
@@ -51,14 +51,14 @@ void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t
void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue);
-#define PUR_0R 0x00 // No PUR resistor
-#define PUR_05KR 0x01 // 0.5k Ohm resistor
-#define PUR_1KR 0x02 // 1.0k Ohm resistor
-#define PUR_2KR 0x03 // 2.0k Ohm resistor
-#define PUR_4KR 0x04 // 4.0k Ohm resistor
-#define PUR_8KR 0x05 // 8.0k Ohm resistor
-#define PUR_16KR 0x06 // 16k Ohm resistor
-#define PUR_32KR 0x07 // 32k Ohm resistor
+#define PUR_0R 0x00 // No PUR resistor
+#define PUR_05KR 0x01 // 0.5k Ohm resistor
+#define PUR_1KR 0x02 // 1.0k Ohm resistor
+#define PUR_2KR 0x03 // 2.0k Ohm resistor
+#define PUR_4KR 0x04 // 4.0k Ohm resistor
+#define PUR_8KR 0x05 // 8.0k Ohm resistor
+#define PUR_16KR 0x06 // 16k Ohm resistor
+#define PUR_32KR 0x07 // 32k Ohm resistor
#define CS1_SW1 0x00
#define CS2_SW1 0x01
diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h
index 3b56d370dc..918b837f07 100644
--- a/drivers/oled/oled_driver.h
+++ b/drivers/oled/oled_driver.h
@@ -34,16 +34,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define OLED_DISPLAY_HEIGHT 64
# endif
# ifndef OLED_MATRIX_SIZE
-# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed)
+# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 1024 (compile time mathed)
# endif
# ifndef OLED_BLOCK_TYPE
# define OLED_BLOCK_TYPE uint16_t
# endif
# ifndef OLED_BLOCK_COUNT
-# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed)
+# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 32 (compile time mathed)
# endif
# ifndef OLED_BLOCK_SIZE
-# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
+# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
# endif
# ifndef OLED_COM_PINS
# define OLED_COM_PINS COM_PINS_ALT
@@ -68,7 +68,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 88, 96, 104, 112, 120 }
// #define OLED_TARGET_MAP { 56, 120, 48, 112, 40, 104, 32, 96, 24, 88, 16, 80, 8, 72, 0, 64 }
-#else // defined(OLED_DISPLAY_128X64)
+#else // defined(OLED_DISPLAY_128X64)
// Default 128x32
# ifndef OLED_DISPLAY_WIDTH
# define OLED_DISPLAY_WIDTH 128
@@ -77,16 +77,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define OLED_DISPLAY_HEIGHT 32
# endif
# ifndef OLED_MATRIX_SIZE
-# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed)
+# define OLED_MATRIX_SIZE (OLED_DISPLAY_HEIGHT / 8 * OLED_DISPLAY_WIDTH) // 512 (compile time mathed)
# endif
# ifndef OLED_BLOCK_TYPE
-# define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only
+# define OLED_BLOCK_TYPE uint16_t // Type to use for segmenting the oled display for smart rendering, use unsigned types only
# endif
# ifndef OLED_BLOCK_COUNT
-# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed)
+# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) // 16 (compile time mathed)
# endif
# ifndef OLED_BLOCK_SIZE
-# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
+# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) // 32 (compile time mathed)
# endif
# ifndef OLED_COM_PINS
# define OLED_COM_PINS COM_PINS_SEQ
@@ -105,7 +105,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// If OLED_BLOCK_TYPE is uint8_t, these tables would look like:
// #define OLED_SOURCE_MAP { 0, 8, 16, 24, 32, 40, 48, 56 }
// #define OLED_TARGET_MAP { 48, 32, 16, 0, 56, 40, 24, 8 }
-#endif // defined(OLED_DISPLAY_CUSTOM)
+#endif // defined(OLED_DISPLAY_CUSTOM)
#if !defined(OLED_IC)
# define OLED_IC OLED_IC_SSD1306
@@ -180,7 +180,7 @@ typedef enum {
OLED_ROTATION_0 = 0,
OLED_ROTATION_90 = 1,
OLED_ROTATION_180 = 2,
- OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180
+ OLED_ROTATION_270 = 3, // OLED_ROTATION_90 | OLED_ROTATION_180
} oled_rotation_t;
// Initialize the oled display, rotating the rendered output based on the define passed in.
@@ -262,7 +262,7 @@ void oled_write_raw_P(const char *data, uint16_t size);
# define oled_write_P(data, invert) oled_write(data, invert)
# define oled_write_ln_P(data, invert) oled_write(data, invert)
# define oled_write_raw_P(data, size) oled_write_raw(data, size)
-#endif // defined(__AVR__)
+#endif // defined(__AVR__)
// Can be used to manually turn on the screen if it is off
// Returns true if the screen was on or turns on
diff --git a/drivers/oled/ssd1306_sh1106.c b/drivers/oled/ssd1306_sh1106.c
index d9bd3c14bd..30cfeb5648 100644
--- a/drivers/oled/ssd1306_sh1106.c
+++ b/drivers/oled/ssd1306_sh1106.c
@@ -53,7 +53,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PAGE_ADDR 0x22
#define PAM_SETCOLUMN_LSB 0x00
#define PAM_SETCOLUMN_MSB 0x10
-#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7
+#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7
// Hardware Configuration Commands
#define DISPLAY_START_LINE 0x40
@@ -97,9 +97,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define I2C_DATA 0x40
#if defined(__AVR__)
# define I2C_TRANSMIT_P(data) i2c_transmit_P((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT)
-#else // defined(__AVR__)
+#else // defined(__AVR__)
# define I2C_TRANSMIT_P(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT)
-#endif // defined(__AVR__)
+#endif // defined(__AVR__)
#define I2C_TRANSMIT(data) i2c_transmit((OLED_DISPLAY_ADDRESS << 1), &data[0], sizeof(data), OLED_I2C_TIMEOUT)
#define I2C_WRITE_REG(mode, data, size) i2c_writeReg((OLED_DISPLAY_ADDRESS << 1), mode, data, size, OLED_I2C_TIMEOUT)
@@ -119,7 +119,7 @@ bool oled_inverted = false;
uint8_t oled_brightness = OLED_BRIGHTNESS;
oled_rotation_t oled_rotation = 0;
uint8_t oled_rotation_width = 0;
-uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values
+uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values
uint8_t oled_scroll_start = 0;
uint8_t oled_scroll_end = 7;
#if OLED_TIMEOUT > 0
@@ -190,7 +190,7 @@ bool oled_init(oled_rotation_t rotation) {
#if (OLED_IC != OLED_IC_SH1106)
// MEMORY_MODE is unsupported on SH1106 (Page Addressing only)
MEMORY_MODE,
- 0x00, // Horizontal addressing mode
+ 0x00, // Horizontal addressing mode
#endif
};
if (I2C_TRANSMIT_P(display_setup1) != I2C_STATUS_SUCCESS) {
@@ -232,8 +232,12 @@ bool oled_init(oled_rotation_t rotation) {
return true;
}
-__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return rotation; }
-__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; }
+__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) {
+ return rotation;
+}
+__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) {
+ return rotation;
+}
void oled_clear(void) {
memset(oled_buffer, 0, sizeof(oled_buffer));
@@ -306,9 +310,9 @@ void oled_render(void) {
// Set column & page position
static uint8_t display_start[] = {I2C_CMD, COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1};
if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) {
- calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
+ calc_bounds(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
} else {
- calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
+ calc_bounds_90(update_start, &display_start[1]); // Offset from I2C_CMD byte at the start
}
// Send column & page position
@@ -368,7 +372,8 @@ void oled_advance_page(bool clearPageRemainder) {
remaining = remaining / OLED_FONT_WIDTH;
// Write empty character until next line
- while (remaining--) oled_write_char(' ', false);
+ while (remaining--)
+ oled_write_char(' ', false);
} else {
// Next page index out of bounds?
if (index + remaining >= OLED_MATRIX_SIZE) {
@@ -419,7 +424,7 @@ void oled_write_char(const char data, bool invert) {
_Static_assert(sizeof(font) >= ((OLED_FONT_END + 1 - OLED_FONT_START) * OLED_FONT_WIDTH), "OLED_FONT_END references outside array");
// set the reder buffer data
- uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
+ uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index
if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) {
memset(oled_cursor, 0x00, OLED_FONT_WIDTH);
} else {
@@ -545,7 +550,7 @@ void oled_write_raw_P(const char *data, uint16_t size) {
oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE));
}
}
-#endif // defined(__AVR__)
+#endif // defined(__AVR__)
bool oled_on(void) {
if (!oled_initialized) {
@@ -595,7 +600,9 @@ bool oled_off(void) {
return !oled_active;
}
-bool is_oled_on(void) { return oled_active; }
+bool is_oled_on(void) {
+ return oled_active;
+}
uint8_t oled_set_brightness(uint8_t level) {
if (!oled_initialized) {
@@ -613,7 +620,9 @@ uint8_t oled_set_brightness(uint8_t level) {
return oled_brightness;
}
-uint8_t oled_get_brightness(void) { return oled_brightness; }
+uint8_t oled_get_brightness(void) {
+ return oled_brightness;
+}
// Set the specific 8 lines rows of the screen to scroll.
// 0 is the default for start, and 7 for end, which is the entire
@@ -693,7 +702,9 @@ bool oled_scroll_off(void) {
return !oled_scrolling;
}
-bool is_oled_scrolling(void) { return oled_scrolling; }
+bool is_oled_scrolling(void) {
+ return oled_scrolling;
+}
bool oled_invert(bool invert) {
if (!oled_initialized) {
@@ -777,5 +788,9 @@ void oled_task(void) {
#endif
}
-__attribute__((weak)) bool oled_task_kb(void) { return oled_task_user(); }
-__attribute__((weak)) bool oled_task_user(void) { return true; }
+__attribute__((weak)) bool oled_task_kb(void) {
+ return oled_task_user();
+}
+__attribute__((weak)) bool oled_task_user(void) {
+ return true;
+}
diff --git a/drivers/ps2/ps2_busywait.c b/drivers/ps2/ps2_busywait.c
index 983194eea8..c5a0183bb7 100644
--- a/drivers/ps2/ps2_busywait.c
+++ b/drivers/ps2/ps2_busywait.c
@@ -71,12 +71,12 @@ uint8_t ps2_host_send(uint8_t data) {
/* terminate a transmission if we have */
inhibit();
- wait_us(100); // 100us [4]p.13, [5]p.50
+ wait_us(100); // 100us [4]p.13, [5]p.50
/* 'Request to Send' and Start bit */
data_lo();
clock_hi();
- WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
+ WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
/* Data bit */
for (uint8_t i = 0; i < 8; i++) {
@@ -143,7 +143,7 @@ uint8_t ps2_host_recv(void) {
idle();
/* start bit [1] */
- WAIT(clock_lo, 100, 1); // TODO: this is enough?
+ WAIT(clock_lo, 100, 1); // TODO: this is enough?
WAIT(data_lo, 1, 2);
WAIT(clock_hi, 50, 3);
diff --git a/drivers/ps2/ps2_interrupt.c b/drivers/ps2/ps2_interrupt.c
index 70debd02f7..c49b4f8b75 100644
--- a/drivers/ps2/ps2_interrupt.c
+++ b/drivers/ps2/ps2_interrupt.c
@@ -43,7 +43,7 @@ POSSIBILITY OF SUCH DAMAGE.
#if defined(__AVR__)
# include <avr/interrupt.h>
-#elif defined(PROTOCOL_CHIBIOS) // TODO: or STM32 ?
+#elif defined(PROTOCOL_CHIBIOS) // TODO: or STM32 ?
// chibiOS headers
# include "ch.h"
# include "hal.h"
@@ -71,7 +71,9 @@ static inline void pbuf_clear(void);
#if defined(PROTOCOL_CHIBIOS)
void ps2_interrupt_service_routine(void);
-void palCallback(void *arg) { ps2_interrupt_service_routine(); }
+void palCallback(void *arg) {
+ ps2_interrupt_service_routine();
+}
# define PS2_INT_INIT() \
{ palSetLineMode(PS2_CLOCK_PIN, PAL_MODE_INPUT); } \
@@ -85,7 +87,7 @@ void palCallback(void *arg) { ps2_interrupt_service_routine(); }
# define PS2_INT_OFF() \
{ palDisableLineEvent(PS2_CLOCK_PIN); } \
while (0)
-#endif // PROTOCOL_CHIBIOS
+#endif // PROTOCOL_CHIBIOS
void ps2_host_init(void) {
idle();
@@ -103,12 +105,12 @@ uint8_t ps2_host_send(uint8_t data) {
/* terminate a transmission if we have */
inhibit();
- wait_us(100); // 100us [4]p.13, [5]p.50
+ wait_us(100); // 100us [4]p.13, [5]p.50
/* 'Request to Send' and Start bit */
data_lo();
clock_hi();
- WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
+ WAIT(clock_lo, 10000, 10); // 10ms [5]p.50
/* Data bit[2-9] */
for (uint8_t i = 0; i < 8; i++) {
@@ -244,7 +246,9 @@ RETURN:
}
#if defined(__AVR__)
-ISR(PS2_INT_VECT) { ps2_interrupt_service_routine(); }
+ISR(PS2_INT_VECT) {
+ ps2_interrupt_service_routine();
+}
#endif
/* send LED state to keyboard */
diff --git a/drivers/ps2/ps2_mouse.c b/drivers/ps2/ps2_mouse.c
index 8a6668b410..ccb0a929ae 100644
--- a/drivers/ps2/ps2_mouse.c
+++ b/drivers/ps2/ps2_mouse.c
@@ -42,7 +42,7 @@ static inline void ps2_mouse_scroll_button_task(report_mouse_t *mouse_report);
void ps2_mouse_init(void) {
ps2_host_init();
- wait_ms(PS2_MOUSE_INIT_DELAY); // wait for powering up
+ wait_ms(PS2_MOUSE_INIT_DELAY); // wait for powering up
PS2_MOUSE_SEND(PS2_MOUSE_RESET, "ps2_mouse_init: sending reset");
@@ -113,9 +113,13 @@ void ps2_mouse_task(void) {
ps2_mouse_clear_report(&mouse_report);
}
-void ps2_mouse_disable_data_reporting(void) { PS2_MOUSE_SEND(PS2_MOUSE_DISABLE_DATA_REPORTING, "ps2 mouse disable data reporting"); }
+void ps2_mouse_disable_data_reporting(void) {
+ PS2_MOUSE_SEND(PS2_MOUSE_DISABLE_DATA_REPORTING, "ps2 mouse disable data reporting");
+}
-void ps2_mouse_enable_data_reporting(void) { PS2_MOUSE_SEND(PS2_MOUSE_ENABLE_DATA_REPORTING, "ps2 mouse enable data reporting"); }
+void ps2_mouse_enable_data_reporting(void) {
+ PS2_MOUSE_SEND(PS2_MOUSE_ENABLE_DATA_REPORTING, "ps2 mouse enable data reporting");
+}
void ps2_mouse_set_remote_mode(void) {
PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_REMOTE_MODE, "ps2 mouse set remote mode");
@@ -127,13 +131,21 @@ void ps2_mouse_set_stream_mode(void) {
ps2_mouse_mode = PS2_MOUSE_STREAM_MODE;
}
-void ps2_mouse_set_scaling_2_1(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_2_1, "ps2 mouse set scaling 2:1"); }
+void ps2_mouse_set_scaling_2_1(void) {
+ PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_2_1, "ps2 mouse set scaling 2:1");
+}
-void ps2_mouse_set_scaling_1_1(void) { PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_1_1, "ps2 mouse set scaling 1:1"); }
+void ps2_mouse_set_scaling_1_1(void) {
+ PS2_MOUSE_SEND_SAFE(PS2_MOUSE_SET_SCALING_1_1, "ps2 mouse set scaling 1:1");
+}
-void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution) { PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_RESOLUTION, resolution, "ps2 mouse set resolution"); }
+void ps2_mouse_set_resolution(ps2_mouse_resolution_t resolution) {
+ PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_RESOLUTION, resolution, "ps2 mouse set resolution");
+}
-void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate) { PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_SAMPLE_RATE, sample_rate, "ps2 mouse set sample rate"); }
+void ps2_mouse_set_sample_rate(ps2_mouse_sample_rate_t sample_rate) {
+ PS2_MOUSE_SET_SAFE(PS2_MOUSE_SET_SAMPLE_RATE, sample_rate, "ps2 mouse set sample rate");
+}
/* ============================= HELPERS ============================ */
@@ -165,7 +177,7 @@ static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report)
#ifdef PS2_MOUSE_INVERT_X
mouse_report->x = -mouse_report->x;
#endif
-#ifndef PS2_MOUSE_INVERT_Y // NOTE if not!
+#ifndef PS2_MOUSE_INVERT_Y // NOTE if not!
// invert coordinate of y to conform to USB HID mouse
mouse_report->y = -mouse_report->y;
#endif
diff --git a/drivers/sensors/adns5050.c b/drivers/sensors/adns5050.c
index c23d24d5af..b76268fba2 100644
--- a/drivers/sensors/adns5050.c
+++ b/drivers/sensors/adns5050.c
@@ -74,9 +74,13 @@ void adns5050_sync(void) {
writePinHigh(ADNS5050_CS_PIN);
}
-void adns5050_cs_select(void) { writePinLow(ADNS5050_CS_PIN); }
+void adns5050_cs_select(void) {
+ writePinLow(ADNS5050_CS_PIN);
+}
-void adns5050_cs_deselect(void) { writePinHigh(ADNS5050_CS_PIN); }
+void adns5050_cs_deselect(void) {
+ writePinHigh(ADNS5050_CS_PIN);
+}
uint8_t adns5050_serial_read(void) {
setPinInput(ADNS5050_SDIO_PIN);
@@ -190,7 +194,7 @@ int8_t convert_twoscomp(uint8_t data) {
// Don't forget to use the definitions for CPI in the header file.
void adns5050_set_cpi(uint16_t cpi) {
- uint8_t cpival = constrain((cpi / 125), 0x1, 0xD); // limits to 0--119
+ uint8_t cpival = constrain((cpi / 125), 0x1, 0xD); // limits to 0--119
adns5050_write_reg(REG_MOUSE_CONTROL2, 0b10000 | cpival);
}
diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c
index d167841968..3633f23e52 100644
--- a/drivers/sensors/adns9800.c
+++ b/drivers/sensors/adns9800.c
@@ -77,7 +77,9 @@
#define MSB1 0x80
// clang-format on
-void adns9800_spi_start(void) { spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR); }
+void adns9800_spi_start(void) {
+ spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR);
+}
void adns9800_write(uint8_t reg_addr, uint8_t data) {
adns9800_spi_start();
diff --git a/drivers/sensors/analog_joystick.c b/drivers/sensors/analog_joystick.c
index 1666bed047..95f8cff23a 100644
--- a/drivers/sensors/analog_joystick.c
+++ b/drivers/sensors/analog_joystick.c
@@ -24,7 +24,7 @@ uint16_t minAxisValue = ANALOG_JOYSTICK_AXIS_MIN;
uint16_t maxAxisValue = ANALOG_JOYSTICK_AXIS_MAX;
uint8_t maxCursorSpeed = ANALOG_JOYSTICK_SPEED_MAX;
-uint8_t speedRegulator = ANALOG_JOYSTICK_SPEED_REGULATOR; // Lower Values Create Faster Movement
+uint8_t speedRegulator = ANALOG_JOYSTICK_SPEED_REGULATOR; // Lower Values Create Faster Movement
int16_t xOrigin, yOrigin;
diff --git a/drivers/sensors/cirque_pinnacle.c b/drivers/sensors/cirque_pinnacle.c
index b807c4f076..2db7f916fe 100644
--- a/drivers/sensors/cirque_pinnacle.c
+++ b/drivers/sensors/cirque_pinnacle.c
@@ -54,7 +54,9 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count);
void RAP_Write(uint8_t address, uint8_t data);
#ifdef CONSOLE_ENABLE
-void print_byte(uint8_t byte) { xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
+void print_byte(uint8_t byte) {
+ xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0'));
+}
#endif
/* Logical Scaling Functions */
@@ -73,8 +75,12 @@ void ClipCoordinates(pinnacle_data_t* coordinates) {
}
}
-uint16_t cirque_pinnacle_get_scale(void) { return scale_data; }
-void cirque_pinnacle_set_scale(uint16_t scale) { scale_data = scale; }
+uint16_t cirque_pinnacle_get_scale(void) {
+ return scale_data;
+}
+void cirque_pinnacle_set_scale(uint16_t scale) {
+ scale_data = scale;
+}
// Scales data to desired X & Y resolution
void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResolution, uint16_t yResolution) {
@@ -105,13 +111,13 @@ void cirque_pinnacle_clear_flags() {
void cirque_pinnacle_enable_feed(bool feedEnable) {
uint8_t temp;
- RAP_ReadBytes(FEEDCONFIG_1, &temp, 1); // Store contents of FeedConfig1 register
+ RAP_ReadBytes(FEEDCONFIG_1, &temp, 1); // Store contents of FeedConfig1 register
if (feedEnable) {
- temp |= 0x01; // Set Feed Enable bit
+ temp |= 0x01; // Set Feed Enable bit
RAP_Write(0x04, temp);
} else {
- temp &= ~0x01; // Clear Feed Enable bit
+ temp &= ~0x01; // Clear Feed Enable bit
RAP_Write(0x04, temp);
}
}
@@ -122,13 +128,13 @@ void cirque_pinnacle_enable_feed(bool feedEnable) {
void ERA_ReadBytes(uint16_t address, uint8_t* data, uint16_t count) {
uint8_t ERAControlValue = 0xFF;
- cirque_pinnacle_enable_feed(false); // Disable feed
+ cirque_pinnacle_enable_feed(false); // Disable feed
- RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Send upper byte of ERA address
- RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Send lower byte of ERA address
+ RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Send upper byte of ERA address
+ RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Send lower byte of ERA address
for (uint16_t i = 0; i < count; i++) {
- RAP_Write(ERA_CONTROL, 0x05); // Signal ERA-read (auto-increment) to Pinnacle
+ RAP_Write(ERA_CONTROL, 0x05); // Signal ERA-read (auto-increment) to Pinnacle
// Wait for status register 0x1E to clear
do {
@@ -145,14 +151,14 @@ void ERA_ReadBytes(uint16_t address, uint8_t* data, uint16_t count) {
void ERA_WriteByte(uint16_t address, uint8_t data) {
uint8_t ERAControlValue = 0xFF;
- cirque_pinnacle_enable_feed(false); // Disable feed
+ cirque_pinnacle_enable_feed(false); // Disable feed
- RAP_Write(ERA_VALUE, data); // Send data byte to be written
+ RAP_Write(ERA_VALUE, data); // Send data byte to be written
- RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Upper byte of ERA address
- RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Lower byte of ERA address
+ RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Upper byte of ERA address
+ RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Lower byte of ERA address
- RAP_Write(ERA_CONTROL, 0x02); // Signal an ERA-write to Pinnacle
+ RAP_Write(ERA_CONTROL, 0x02); // Signal an ERA-write to Pinnacle
// Wait for status register 0x1E to clear
do {
@@ -166,7 +172,7 @@ void cirque_pinnacle_set_adc_attenuation(uint8_t adcGain) {
uint8_t temp = 0x00;
ERA_ReadBytes(0x0187, &temp, 1);
- temp &= 0x3F; // clear top two bits
+ temp &= 0x3F; // clear top two bits
temp |= adcGain;
ERA_WriteByte(0x0187, temp);
ERA_ReadBytes(0x0187, &temp, 1);
diff --git a/drivers/sensors/cirque_pinnacle.h b/drivers/sensors/cirque_pinnacle.h
index db891122a6..c8cb360e03 100644
--- a/drivers/sensors/cirque_pinnacle.h
+++ b/drivers/sensors/cirque_pinnacle.h
@@ -26,16 +26,16 @@ void cirque_pinnacle_set_scale(uint16_t scale);
// Coordinate scaling values
#ifndef CIRQUE_PINNACLE_X_LOWER
-# define CIRQUE_PINNACLE_X_LOWER 127 // min "reachable" X value
+# define CIRQUE_PINNACLE_X_LOWER 127 // min "reachable" X value
#endif
#ifndef CIRQUE_PINNACLE_X_UPPER
-# define CIRQUE_PINNACLE_X_UPPER 1919 // max "reachable" X value
+# define CIRQUE_PINNACLE_X_UPPER 1919 // max "reachable" X value
#endif
#ifndef CIRQUE_PINNACLE_Y_LOWER
-# define CIRQUE_PINNACLE_Y_LOWER 63 // min "reachable" Y value
+# define CIRQUE_PINNACLE_Y_LOWER 63 // min "reachable" Y value
#endif
#ifndef CIRQUE_PINNACLE_Y_UPPER
-# define CIRQUE_PINNACLE_Y_UPPER 1471 // max "reachable" Y value
+# define CIRQUE_PINNACLE_Y_UPPER 1471 // max "reachable" Y value
#endif
#ifndef CIRQUE_PINNACLE_X_RANGE
# define CIRQUE_PINNACLE_X_RANGE (CIRQUE_PINNACLE_X_UPPER - CIRQUE_PINNACLE_X_LOWER)
diff --git a/drivers/sensors/cirque_pinnacle_i2c.c b/drivers/sensors/cirque_pinnacle_i2c.c
index 81dd982b0c..8a38f1dcea 100644
--- a/drivers/sensors/cirque_pinnacle_i2c.c
+++ b/drivers/sensors/cirque_pinnacle_i2c.c
@@ -14,7 +14,7 @@ extern bool touchpad_init;
/* RAP Functions */
// Reads <count> Pinnacle registers starting at <address>
void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
- uint8_t cmdByte = READ_MASK | address; // Form the READ command byte
+ uint8_t cmdByte = READ_MASK | address; // Form the READ command byte
if (touchpad_init) {
i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, NULL, 0, CIRQUE_PINNACLE_TIMEOUT);
if (i2c_readReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, data, count, CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) {
@@ -29,7 +29,7 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
// Writes single-byte <data> to <address>
void RAP_Write(uint8_t address, uint8_t data) {
- uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte
+ uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte
if (touchpad_init) {
if (i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, &data, sizeof(data), CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) {
diff --git a/drivers/sensors/cirque_pinnacle_spi.c b/drivers/sensors/cirque_pinnacle_spi.c
index ed40abd9fa..e00e73eb8c 100644
--- a/drivers/sensors/cirque_pinnacle_spi.c
+++ b/drivers/sensors/cirque_pinnacle_spi.c
@@ -13,14 +13,14 @@ extern bool touchpad_init;
/* RAP Functions */
// Reads <count> Pinnacle registers starting at <address>
void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
- uint8_t cmdByte = READ_MASK | address; // Form the READ command byte
+ uint8_t cmdByte = READ_MASK | address; // Form the READ command byte
if (touchpad_init) {
if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_PINNACLE_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) {
spi_write(cmdByte);
- spi_read(); // filler
- spi_read(); // filler
+ spi_read(); // filler
+ spi_read(); // filler
for (uint8_t i = 0; i < count; i++) {
- data[i] = spi_read(); // each sepsequent read gets another register's contents
+ data[i] = spi_read(); // each sepsequent read gets another register's contents
}
} else {
#ifdef CONSOLE_ENABLE
@@ -34,7 +34,7 @@ void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) {
// Writes single-byte <data> to <address>
void RAP_Write(uint8_t address, uint8_t data) {
- uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte
+ uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte
if (touchpad_init) {
if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_PINNACLE_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) {
diff --git a/drivers/sensors/pimoroni_trackball.c b/drivers/sensors/pimoroni_trackball.c
index 2867e763bc..333e017a06 100644
--- a/drivers/sensors/pimoroni_trackball.c
+++ b/drivers/sensors/pimoroni_trackball.c
@@ -33,7 +33,9 @@
static uint16_t precision = 128;
-uint16_t pimoroni_trackball_get_cpi(void) { return (precision * 125); }
+uint16_t pimoroni_trackball_get_cpi(void) {
+ return (precision * 125);
+}
/**
* @brief Sets the scaling value for pimoroni trackball
*
diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c
index 8d1b08e22b..8c977be1c8 100644
--- a/drivers/sensors/pmw3360.c
+++ b/drivers/sensors/pmw3360.c
@@ -86,7 +86,9 @@
bool _inBurst = false;
#ifdef CONSOLE_ENABLE
-void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
+void print_byte(uint8_t byte) {
+ dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0'));
+}
#endif
#define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)))
@@ -144,7 +146,7 @@ bool pmw3360_init(void) {
pmw3360_spi_start();
spi_stop();
- pmw3360_write(REG_Shutdown, 0xb6); // Shutdown first
+ pmw3360_write(REG_Shutdown, 0xb6); // Shutdown first
wait_ms(300);
pmw3360_spi_start();
@@ -222,7 +224,7 @@ bool pmw3360_check_signature(void) {
uint8_t pid = pmw3360_read(REG_Product_ID);
uint8_t iv_pid = pmw3360_read(REG_Inverse_Product_ID);
uint8_t SROM_ver = pmw3360_read(REG_SROM_ID);
- return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04
+ return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04
}
uint16_t pmw3360_get_cpi(void) {
@@ -248,17 +250,17 @@ report_pmw3360_t pmw3360_read_burst(void) {
pmw3360_spi_start();
spi_write(REG_Motion_Burst);
- wait_us(35); // waits for tSRAD_MOTBR
+ wait_us(35); // waits for tSRAD_MOTBR
report.motion = spi_read();
- spi_read(); // skip Observation
+ spi_read(); // skip Observation
// delta registers
report.dx = spi_read();
report.mdx = spi_read();
report.dy = spi_read();
report.mdy = spi_read();
- if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird.
+ if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird.
_inBurst = false;
}
diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h
index 4e17aa0c46..eec7295871 100644
--- a/drivers/sensors/pmw3360.h
+++ b/drivers/sensors/pmw3360.h
@@ -58,11 +58,11 @@
typedef struct {
int8_t motion;
- bool isMotion; // True if a motion is detected.
- bool isOnSurface; // True when a chip is on a surface
- int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value)
+ bool isMotion; // True if a motion is detected.
+ bool isOnSurface; // True when a chip is on a surface
+ int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value)
int8_t mdx;
- int16_t dy; // displacement on y directions.
+ int16_t dy; // displacement on y directions.
int8_t mdy;
} report_pmw3360_t;
diff --git a/drivers/sensors/pmw3389.c b/drivers/sensors/pmw3389.c
index 963925bd38..828dafa134 100644
--- a/drivers/sensors/pmw3389.c
+++ b/drivers/sensors/pmw3389.c
@@ -90,7 +90,9 @@
bool _inBurst = false;
#ifdef CONSOLE_ENABLE
-void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
+void print_byte(uint8_t byte) {
+ dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0'));
+}
#endif
#define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)))
@@ -148,7 +150,7 @@ bool pmw3389_init(void) {
pmw3389_spi_start();
spi_stop();
- pmw3389_write(REG_Shutdown, 0xb6); // Shutdown first
+ pmw3389_write(REG_Shutdown, 0xb6); // Shutdown first
wait_ms(300);
pmw3389_spi_start();
@@ -226,7 +228,7 @@ bool pmw3389_check_signature(void) {
uint8_t pid = pmw3389_read(REG_Product_ID);
uint8_t iv_pid = pmw3389_read(REG_Inverse_Product_ID);
uint8_t SROM_ver = pmw3389_read(REG_SROM_ID);
- return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04
+ return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04
}
uint16_t pmw3389_get_cpi(void) {
@@ -254,17 +256,17 @@ report_pmw3389_t pmw3389_read_burst(void) {
pmw3389_spi_start();
spi_write(REG_Motion_Burst);
- wait_us(35); // waits for tSRAD_MOTBR
+ wait_us(35); // waits for tSRAD_MOTBR
report.motion = spi_read();
- spi_read(); // skip Observation
+ spi_read(); // skip Observation
// delta registers
report.dx = spi_read();
report.mdx = spi_read();
report.dy = spi_read();
report.mdy = spi_read();
- if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird.
+ if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird.
_inBurst = false;
}
diff --git a/drivers/sensors/pmw3389.h b/drivers/sensors/pmw3389.h
index a7c95e6076..db4a763fe3 100644
--- a/drivers/sensors/pmw3389.h
+++ b/drivers/sensors/pmw3389.h
@@ -59,11 +59,11 @@
typedef struct {
int8_t motion;
- bool isMotion; // True if a motion is detected.
- bool isOnSurface; // True when a chip is on a surface
- int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value)
+ bool isMotion; // True if a motion is detected.
+ bool isOnSurface; // True when a chip is on a surface
+ int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value)
int8_t mdx;
- int16_t dy; // displacement on y directions.
+ int16_t dy; // displacement on y directions.
int8_t mdy;
} report_pmw3389_t;
diff --git a/drivers/usb2422.c b/drivers/usb2422.c
index 62b919093b..8ee54b24ee 100644
--- a/drivers/usb2422.c
+++ b/drivers/usb2422.c
@@ -352,7 +352,7 @@ void USB2422_init() {
setPinInput(USB2422_ACTIVE_PIN);
#endif
- i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration
+ i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration
}
void USB2422_configure() {
@@ -363,14 +363,14 @@ void USB2422_configure() {
// configure Usb2422 registers
config.VID.reg = USB2422_VENDOR_ID;
config.PID.reg = USB2422_PRODUCT_ID;
- config.DID.reg = USB2422_DEVICE_VER; // BCD format, eg 01.01
- config.CFG1.bit.SELF_BUS_PWR = 1; // self powered for now
- config.CFG1.bit.HS_DISABLE = 1; // full or high speed
+ config.DID.reg = USB2422_DEVICE_VER; // BCD format, eg 01.01
+ config.CFG1.bit.SELF_BUS_PWR = 1; // self powered for now
+ config.CFG1.bit.HS_DISABLE = 1; // full or high speed
// config.CFG2.bit.COMPOUND = 0; // compound device
- config.CFG3.bit.STRING_EN = 1; // strings enabled
+ config.CFG3.bit.STRING_EN = 1; // strings enabled
// config.NRD.bit.PORT2_NR = 0; // MCU is non-removable
- config.MAXPB.reg = 20; // 0mA
- config.HCMCB.reg = 20; // 0mA
+ config.MAXPB.reg = 20; // 0mA
+ config.HCMCB.reg = 20; // 0mA
config.MFRSL.reg = sizeof(USB2422_MANUFACTURER);
config.PRDSL.reg = sizeof(USB2422_PRODUCT);
config.SERSL.reg = sizeof(SERNAME);
diff --git a/drivers/ws2812.h b/drivers/ws2812.h
index 945b3d0728..5985b5340c 100644
--- a/drivers/ws2812.h
+++ b/drivers/ws2812.h
@@ -33,19 +33,19 @@
#endif
#ifndef WS2812_T1H
-# define WS2812_T1H 900 // Width of a 1 bit in ns
+# define WS2812_T1H 900 // Width of a 1 bit in ns
#endif
#ifndef WS2812_T1L
-# define WS2812_T1L (WS2812_TIMING - WS2812_T1H) // Width of a 1 bit in ns
+# define WS2812_T1L (WS2812_TIMING - WS2812_T1H) // Width of a 1 bit in ns
#endif
#ifndef WS2812_T0H
-# define WS2812_T0H 350 // Width of a 0 bit in ns
+# define WS2812_T0H 350 // Width of a 0 bit in ns
#endif
#ifndef WS2812_T0L
-# define WS2812_T0L (WS2812_TIMING - WS2812_T0H) // Width of a 0 bit in ns
+# define WS2812_T0L (WS2812_TIMING - WS2812_T0H) // Width of a 0 bit in ns
#endif
/*