diff options
Diffstat (limited to 'drivers/painter/st77xx/qp_st7735_opcodes.h')
| -rw-r--r-- | drivers/painter/st77xx/qp_st7735_opcodes.h | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/drivers/painter/st77xx/qp_st7735_opcodes.h b/drivers/painter/st77xx/qp_st7735_opcodes.h new file mode 100644 index 0000000000..816e32f3d7 --- /dev/null +++ b/drivers/painter/st77xx/qp_st7735_opcodes.h @@ -0,0 +1,31 @@ +// Copyright 2022 David Hoelscher (@customMK) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// Quantum Painter ST7735 additional command opcodes + +// Panel Function Commands +#define ST7735_SET_FRAME_RATE_CTL_1 0xB1 // Set frame rate control 1 +#define ST7735_SET_FRAME_RATE_CTL_2 0xB2 // Set frame rate control 2 +#define ST7735_SET_FRAME_RATE_CTL_3 0xB3 // Set frame rate control 3 +#define ST7735_SET_INVERSION_CTL 0xB4 // Set inversion mode control +#define ST7735_SET_DISPLAY_CTL 0xB6 // Set display control 5 +#define ST7735_SET_POWER_CTL_1 0xC0 // Set GVDD +#define ST7735_SET_POWER_CTL_2 0xC1 // Set VGH and VGL +#define ST7735_SET_POWER_CTL_3 0xC2 // Set normal mode op amp current +#define ST7735_SET_POWER_CTL_4 0xC3 // Set idle mode op amp current +#define ST7735_SET_POWER_CTL_5 0xC4 // Set partial mode op amp current +#define ST7735_SET_VCOM_CTL 0xC5 // Set VCOM voltages +#define ST7735_SET_VCOM_OFFSET_CTL 0xC7 // Set VCOM offset ctl +#define ST7735_SET_LCD_ID 0xD1 // Set LCD module version +#define ST7735_SET_PROJECT_ID 0xD2 // Set product project ID +#define ST7735_SET_POWER_CTL_6 0xFC // Set partial+idle op amp current +#define ST7735_SET_NVMEM_CTL_STATUS 0xD9 // EEPROM Control Status +#define ST7735_SET_NVMEM_READ_CMD 0xCC // EEPROM Read Command +#define ST7735_SET_NVMEM_WRITE_CMD 0xDF // EEPROM Write Command +#define ST7735_SET_PGAMMA 0xE0 // Set positive gamma +#define ST7735_SET_NGAMMA 0xE1 // Set negative gamma +#define ST7735_SET_EXTENSION_ENABLE 0xF0 // Enable extension command +#define ST7735_SET_VCOM_DELAY 0xFF // Set VCOM delay time |