diff options
Diffstat (limited to 'drivers/led')
| -rw-r--r-- | drivers/led/ckled2001.c | 11 | ||||
| -rw-r--r-- | drivers/led/issi/is31fl3733-simple.c | 248 | ||||
| -rw-r--r-- | drivers/led/issi/is31fl3733-simple.h | 260 | ||||
| -rw-r--r-- | drivers/led/issi/is31fl3742.h | 299 | ||||
| -rw-r--r-- | drivers/led/issi/is31fl3743.h | 327 | ||||
| -rw-r--r-- | drivers/led/issi/is31fl3745.h | 270 | ||||
| -rw-r--r-- | drivers/led/issi/is31fl3746.h | 198 | ||||
| -rw-r--r-- | drivers/led/issi/is31flcommon.c | 230 | ||||
| -rw-r--r-- | drivers/led/issi/is31flcommon.h | 78 |
9 files changed, 1920 insertions, 1 deletions
diff --git a/drivers/led/ckled2001.c b/drivers/led/ckled2001.c index 990e50cb60..8d71805a24 100644 --- a/drivers/led/ckled2001.c +++ b/drivers/led/ckled2001.c @@ -125,7 +125,16 @@ void CKLED2001_init(uint8_t addr) { // Set CURRENT PAGE (Page 4) CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, CURRENT_TUNE_PAGE); for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) { - CKLED2001_write_register(addr, i, 0xFF); + switch (i) { + case 2: + case 5: + case 8: + case 11: + CKLED2001_write_register(addr, i, 0xA0); + break; + default: + CKLED2001_write_register(addr, i, 0xFF); + } } // Enable LEDs ON/OFF diff --git a/drivers/led/issi/is31fl3733-simple.c b/drivers/led/issi/is31fl3733-simple.c new file mode 100644 index 0000000000..777895bf89 --- /dev/null +++ b/drivers/led/issi/is31fl3733-simple.c @@ -0,0 +1,248 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby + * Copyright 2021 Leo Deng + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "is31fl3733-simple.h" +#include "i2c_master.h" +#include "wait.h" + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) +#define ISSI_ADDR_DEFAULT 0x50 + +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_INTERRUPTMASKREGISTER 0xF0 +#define ISSI_INTERRUPTSTATUSREGISTER 0xF1 + +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 + +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 + +#ifndef ISSI_TIMEOUT +# define ISSI_TIMEOUT 100 +#endif + +#ifndef ISSI_PERSISTENCE +# define ISSI_PERSISTENCE 0 +#endif + +#ifndef ISSI_PWM_FREQUENCY +# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +#endif + +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the IS31FL3733 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[LED_DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required[LED_DRIVER_COUNT] = {false}; + +/* There's probably a better way to init this... */ +#if LED_DRIVER_COUNT == 1 +uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}}; +#elif LED_DRIVER_COUNT == 2 +uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}}; +#elif LED_DRIVER_COUNT == 3 +uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}}; +#elif LED_DRIVER_COUNT == 4 +uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}, {0}}; +#endif +bool g_led_control_registers_update_required[LED_DRIVER_COUNT] = {false}; + +bool IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) { + // If the transaction fails function returns false. + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + +#if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) { + return false; + } +#endif + return true; +} + +bool IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) { + // Assumes PG1 is already selected. + // If any of the transactions fails function returns false. + // Transmit PWM registers in 12 transfers of 16 bytes. + // g_twi_transfer_buffer[] is 20 bytes + + // Iterate over the pwm_buffer contents at 16 byte intervals. + for (int i = 0; i < 192; i += 16) { + g_twi_transfer_buffer[0] = i; + // Copy the data from i to i+15. + // Device will auto-increment register for data after the first byte + // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer. + for (int j = 0; j < 16; j++) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + +#if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) { + return false; + } +#endif + } + return true; +} + +void IS31FL3733_init(uint8_t addr, uint8_t sync) { + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, shutdown is enabled last. + // Set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + // Sync is passed so set it according to the datasheet. + + // Unlock the command register. + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG0 + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); + // Turn off all LEDs. + for (int i = 0x00; i <= 0x17; i++) { + IS31FL3733_write_register(addr, i, 0x00); + } + + // Unlock the command register. + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG1 + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); + // Set PWM on all LEDs to 0 + // No need to setup Breath registers to PWM as that is the default. + for (int i = 0x00; i <= 0xBF; i++) { + IS31FL3733_write_register(addr, i, 0x00); + } + + // Unlock the command register. + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG3 + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); + // Set global current to maximum. + IS31FL3733_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); + // Disable software shutdown. + IS31FL3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01); + + // Wait 10ms to ensure the device has woken up. + wait_ms(10); +} + +void IS31FL3733_set_value(int index, uint8_t value) { + if (index >= 0 && index < DRIVER_LED_TOTAL) { + is31_led led = g_is31_leds[index]; + + g_pwm_buffer[led.driver][led.v] = value; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void IS31FL3733_set_value_all(uint8_t value) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + IS31FL3733_set_value(i, value); + } +} + +void IS31FL3733_set_led_control_register(uint8_t index, bool value) { + is31_led led = g_is31_leds[index]; + + uint8_t control_register = led.v / 8; + uint8_t bit_value = led.v % 8; + + if (value) { + g_led_control_registers[led.driver][control_register] |= (1 << bit_value); + } else { + g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value); + } + + g_led_control_registers_update_required[led.driver] = true; +} + +void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + // Firstly we need to unlock the command register and select PG1. + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); + + // If any of the transactions fail we risk writing dirty PG0, + // refresh page 0 just in case. + if (!IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index])) { + g_led_control_registers_update_required[index] = true; + } + g_pwm_buffer_update_required[index] = false; + } +} + +void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) { + if (g_led_control_registers_update_required[index]) { + // Firstly we need to unlock the command register and select PG0 + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); + for (int i = 0; i < 24; i++) { + IS31FL3733_write_register(addr, i, g_led_control_registers[index][i]); + } + g_led_control_registers_update_required[index] = false; + } +} diff --git a/drivers/led/issi/is31fl3733-simple.h b/drivers/led/issi/is31fl3733-simple.h new file mode 100644 index 0000000000..f071db5e40 --- /dev/null +++ b/drivers/led/issi/is31fl3733-simple.h @@ -0,0 +1,260 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby + * Copyright 2021 Leo Deng + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> +#include "progmem.h" + +typedef struct is31_led { + uint8_t driver : 2; + uint8_t v; +} __attribute__((packed)) is31_led; + +extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; + +void IS31FL3733_init(uint8_t addr, uint8_t sync); +bool IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data); +bool IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer); + +void IS31FL3733_set_value(int index, uint8_t value); +void IS31FL3733_set_value_all(uint8_t value); + +void IS31FL3733_set_led_control_register(uint8_t index, bool value); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); +void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); + +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL + +#define A_1 0x00 +#define A_2 0x01 +#define A_3 0x02 +#define A_4 0x03 +#define A_5 0x04 +#define A_6 0x05 +#define A_7 0x06 +#define A_8 0x07 +#define A_9 0x08 +#define A_10 0x09 +#define A_11 0x0A +#define A_12 0x0B +#define A_13 0x0C +#define A_14 0x0D +#define A_15 0x0E +#define A_16 0x0F + +#define B_1 0x10 +#define B_2 0x11 +#define B_3 0x12 +#define B_4 0x13 +#define B_5 0x14 +#define B_6 0x15 +#define B_7 0x16 +#define B_8 0x17 +#define B_9 0x18 +#define B_10 0x19 +#define B_11 0x1A +#define B_12 0x1B +#define B_13 0x1C +#define B_14 0x1D +#define B_15 0x1E +#define B_16 0x1F + +#define C_1 0x20 +#define C_2 0x21 +#define C_3 0x22 +#define C_4 0x23 +#define C_5 0x24 +#define C_6 0x25 +#define C_7 0x26 +#define C_8 0x27 +#define C_9 0x28 +#define C_10 0x29 +#define C_11 0x2A +#define C_12 0x2B +#define C_13 0x2C +#define C_14 0x2D +#define C_15 0x2E +#define C_16 0x2F + +#define D_1 0x30 +#define D_2 0x31 +#define D_3 0x32 +#define D_4 0x33 +#define D_5 0x34 +#define D_6 0x35 +#define D_7 0x36 +#define D_8 0x37 +#define D_9 0x38 +#define D_10 0x39 +#define D_11 0x3A +#define D_12 0x3B +#define D_13 0x3C +#define D_14 0x3D +#define D_15 0x3E +#define D_16 0x3F + +#define E_1 0x40 +#define E_2 0x41 +#define E_3 0x42 +#define E_4 0x43 +#define E_5 0x44 +#define E_6 0x45 +#define E_7 0x46 +#define E_8 0x47 +#define E_9 0x48 +#define E_10 0x49 +#define E_11 0x4A +#define E_12 0x4B +#define E_13 0x4C +#define E_14 0x4D +#define E_15 0x4E +#define E_16 0x4F + +#define F_1 0x50 +#define F_2 0x51 +#define F_3 0x52 +#define F_4 0x53 +#define F_5 0x54 +#define F_6 0x55 +#define F_7 0x56 +#define F_8 0x57 +#define F_9 0x58 +#define F_10 0x59 +#define F_11 0x5A +#define F_12 0x5B +#define F_13 0x5C +#define F_14 0x5D +#define F_15 0x5E +#define F_16 0x5F + +#define G_1 0x60 +#define G_2 0x61 +#define G_3 0x62 +#define G_4 0x63 +#define G_5 0x64 +#define G_6 0x65 +#define G_7 0x66 +#define G_8 0x67 +#define G_9 0x68 +#define G_10 0x69 +#define G_11 0x6A +#define G_12 0x6B +#define G_13 0x6C +#define G_14 0x6D +#define G_15 0x6E +#define G_16 0x6F + +#define H_1 0x70 +#define H_2 0x71 +#define H_3 0x72 +#define H_4 0x73 +#define H_5 0x74 +#define H_6 0x75 +#define H_7 0x76 +#define H_8 0x77 +#define H_9 0x78 +#define H_10 0x79 +#define H_11 0x7A +#define H_12 0x7B +#define H_13 0x7C +#define H_14 0x7D +#define H_15 0x7E +#define H_16 0x7F + +#define I_1 0x80 +#define I_2 0x81 +#define I_3 0x82 +#define I_4 0x83 +#define I_5 0x84 +#define I_6 0x85 +#define I_7 0x86 +#define I_8 0x87 +#define I_9 0x88 +#define I_10 0x89 +#define I_11 0x8A +#define I_12 0x8B +#define I_13 0x8C +#define I_14 0x8D +#define I_15 0x8E +#define I_16 0x8F + +#define J_1 0x90 +#define J_2 0x91 +#define J_3 0x92 +#define J_4 0x93 +#define J_5 0x94 +#define J_6 0x95 +#define J_7 0x96 +#define J_8 0x97 +#define J_9 0x98 +#define J_10 0x99 +#define J_11 0x9A +#define J_12 0x9B +#define J_13 0x9C +#define J_14 0x9D +#define J_15 0x9E +#define J_16 0x9F + +#define K_1 0xA0 +#define K_2 0xA1 +#define K_3 0xA2 +#define K_4 0xA3 +#define K_5 0xA4 +#define K_6 0xA5 +#define K_7 0xA6 +#define K_8 0xA7 +#define K_9 0xA8 +#define K_10 0xA9 +#define K_11 0xAA +#define K_12 0xAB +#define K_13 0xAC +#define K_14 0xAD +#define K_15 0xAE +#define K_16 0xAF + +#define L_1 0xB0 +#define L_2 0xB1 +#define L_3 0xB2 +#define L_4 0xB3 +#define L_5 0xB4 +#define L_6 0xB5 +#define L_7 0xB6 +#define L_8 0xB7 +#define L_9 0xB8 +#define L_10 0xB9 +#define L_11 0xBA +#define L_12 0xBB +#define L_13 0xBC +#define L_14 0xBD +#define L_15 0xBE +#define L_16 0xBF diff --git a/drivers/led/issi/is31fl3742.h b/drivers/led/issi/is31fl3742.h new file mode 100644 index 0000000000..c96f12d0f1 --- /dev/null +++ b/drivers/led/issi/is31fl3742.h @@ -0,0 +1,299 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2020 MelGeek + * Copyright 2021 MasterSpoon + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR represents A1:A0 of the 7-bit address. +// The result is: 0b01100(ADDR) +#ifndef DRIVER_ADDR_1 +# define DRIVER_ADDR_1 0b0110000 +#endif + +// Command Registers +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_IDREGISTER 0xFC +#define ISSI_REGISTER_UNLOCK 0xC5 + +// Response Registers +#define ISSI_PAGE_PWM 0x00 +#define ISSI_PAGE_SCALING 0x02 +#define ISSI_PAGE_FUNCTION 0x04 + +// Registers under Function Register +#define ISSI_REG_CONFIGURATION 0x00 +#define ISSI_REG_GLOBALCURRENT 0x01 +#define ISSI_REG_PULLDOWNUP 0x02 +#define ISSI_REG_SSR 0x41 +#define ISSI_REG_RESET 0x3F +#define ISSI_REG_PWM_SET 0x36 + +// Set defaults for Function Registers +#ifndef ISSI_CONFIGURATION +# define ISSI_CONFIGURATION 0x31 +#endif +#ifndef ISSI_GLOBALCURRENT +# define ISSI_GLOBALCURRENT 0xFF +#endif +#ifndef ISSI_PULLDOWNUP +# define ISSI_PULLDOWNUP 0x55 +#endif +#ifndef ISSI_PWM_SET +# define ISSI_PWM_SET 0x00 +#endif + +// Set defaults for Spread Spectrum Register +#ifndef ISSI_SSR_1 +# define ISSI_SSR_1 0x00 +#endif +#ifndef ISSI_SSR_2 +# define ISSI_SSR_2 0x00 +#endif +#ifndef ISSI_SSR_3 +# define ISSI_SSR_3 0x00 +#endif +#ifndef ISSI_SSR_4 +# define ISSI_SSR_4 0x00 +#endif + +// Set defaults for Scaling registers +#ifndef ISSI_SCAL_RED +# define ISSI_SCAL_RED 0xFF +#endif +#ifndef ISSI_SCAL_BLUE +# define ISSI_SCAL_BLUE 0xFF +#endif +#ifndef ISSI_SCAL_GREEN +# define ISSI_SCAL_GREEN 0xFF +#endif +#define ISSI_SCAL_RED_OFF 0x00 +#define ISSI_SCAL_GREEN_OFF 0x00 +#define ISSI_SCAL_BLUE_OFF 0x00 + +#ifndef ISSI_SCAL_LED +# define ISSI_SCAL_LED 0xFF +#endif +#define ISSI_SCAL_LED_OFF 0x00 + +// Set buffer sizes +#define ISSI_MAX_LEDS 180 +#define ISSI_SCALING_SIZE 180 +#define ISSI_PWM_TRF_SIZE 18 +#define ISSI_SCALING_TRF_SIZE 18 + +// Location of 1st bit for PWM and Scaling registers +#define ISSI_PWM_REG_1ST 0x00 +#define ISSI_SCL_REG_1ST 0x00 + +// Map CS SW locations to order in PWM / Scaling buffers +// This matches the ORDER in the Datasheet Register not the POSITION +// It will always count from 0x00 to (ISSI_MAX_LEDS - 1) +#define CS1_SW1 0x00 +#define CS2_SW1 0x01 +#define CS3_SW1 0x02 +#define CS4_SW1 0x03 +#define CS5_SW1 0x04 +#define CS6_SW1 0x05 +#define CS7_SW1 0x06 +#define CS8_SW1 0x07 +#define CS9_SW1 0x08 +#define CS10_SW1 0x09 +#define CS11_SW1 0x0A +#define CS12_SW1 0x0B +#define CS13_SW1 0x0C +#define CS14_SW1 0x0D +#define CS15_SW1 0x0E +#define CS16_SW1 0x0F +#define CS17_SW1 0x10 +#define CS18_SW1 0x11 +#define CS19_SW1 0x12 +#define CS20_SW1 0x13 +#define CS21_SW1 0x14 +#define CS22_SW1 0x15 +#define CS23_SW1 0x16 +#define CS24_SW1 0x17 +#define CS25_SW1 0x18 +#define CS26_SW1 0x19 +#define CS27_SW1 0x1A +#define CS28_SW1 0x1B +#define CS29_SW1 0x1C +#define CS30_SW1 0x1D + +#define CS1_SW2 0x1E +#define CS2_SW2 0x1F +#define CS3_SW2 0x20 +#define CS4_SW2 0x21 +#define CS5_SW2 0x22 +#define CS6_SW2 0x23 +#define CS7_SW2 0x24 +#define CS8_SW2 0x25 +#define CS9_SW2 0x26 +#define CS10_SW2 0x27 +#define CS11_SW2 0x28 +#define CS12_SW2 0x29 +#define CS13_SW2 0x2A +#define CS14_SW2 0x2B +#define CS15_SW2 0x2C +#define CS16_SW2 0x2D +#define CS17_SW2 0x2E +#define CS18_SW2 0x2F +#define CS19_SW2 0x30 +#define CS20_SW2 0x31 +#define CS21_SW2 0x32 +#define CS22_SW2 0x33 +#define CS23_SW2 0x34 +#define CS24_SW2 0x35 +#define CS25_SW2 0x36 +#define CS26_SW2 0x37 +#define CS27_SW2 0x38 +#define CS28_SW2 0x39 +#define CS29_SW2 0x3A +#define CS30_SW2 0x3B + +#define CS1_SW3 0x3C +#define CS2_SW3 0x3D +#define CS3_SW3 0x3E +#define CS4_SW3 0x3F +#define CS5_SW3 0x40 +#define CS6_SW3 0x41 +#define CS7_SW3 0x42 +#define CS8_SW3 0x43 +#define CS9_SW3 0x44 +#define CS10_SW3 0x45 +#define CS11_SW3 0x46 +#define CS12_SW3 0x47 +#define CS13_SW3 0x48 +#define CS14_SW3 0x49 +#define CS15_SW3 0x4A +#define CS16_SW3 0x4B +#define CS17_SW3 0x4C +#define CS18_SW3 0x4D +#define CS19_SW3 0x4E +#define CS20_SW3 0x4F +#define CS21_SW3 0x50 +#define CS22_SW3 0x51 +#define CS23_SW3 0x52 +#define CS24_SW3 0x53 +#define CS25_SW3 0x54 +#define CS26_SW3 0x55 +#define CS27_SW3 0x56 +#define CS28_SW3 0x57 +#define CS29_SW3 0x58 +#define CS30_SW3 0x59 + +#define CS1_SW4 0x5A +#define CS2_SW4 0x5B +#define CS3_SW4 0x5C +#define CS4_SW4 0x5D +#define CS5_SW4 0x5E +#define CS6_SW4 0x5F +#define CS7_SW4 0x60 +#define CS8_SW4 0x61 +#define CS9_SW4 0x62 +#define CS10_SW4 0x63 +#define CS11_SW4 0x64 +#define CS12_SW4 0x65 +#define CS13_SW4 0x66 +#define CS14_SW4 0x67 +#define CS15_SW4 0x68 +#define CS16_SW4 0x69 +#define CS17_SW4 0x6A +#define CS18_SW4 0x6B +#define CS19_SW4 0x6C +#define CS20_SW4 0x6D +#define CS21_SW4 0x6E +#define CS22_SW4 0x6F +#define CS23_SW4 0x70 +#define CS24_SW4 0x71 +#define CS25_SW4 0x72 +#define CS26_SW4 0x73 +#define CS27_SW4 0x74 +#define CS28_SW4 0x75 +#define CS29_SW4 0x76 +#define CS30_SW4 0x77 + +#define CS1_SW5 0x78 +#define CS2_SW5 0x79 +#define CS3_SW5 0x7A +#define CS4_SW5 0x7B +#define CS5_SW5 0x7C +#define CS6_SW5 0x7D +#define CS7_SW5 0x7E +#define CS8_SW5 0x7F +#define CS9_SW5 0x80 +#define CS10_SW5 0x81 +#define CS11_SW5 0x82 +#define CS12_SW5 0x83 +#define CS13_SW5 0x84 +#define CS14_SW5 0x85 +#define CS15_SW5 0x86 +#define CS16_SW5 0x87 +#define CS17_SW5 0x88 +#define CS18_SW5 0x89 +#define CS19_SW5 0x8A +#define CS20_SW5 0x8B +#define CS21_SW5 0x8C +#define CS22_SW5 0x8D +#define CS23_SW5 0x8E +#define CS24_SW5 0x8F +#define CS25_SW5 0x90 +#define CS26_SW5 0x91 +#define CS27_SW5 0x92 +#define CS28_SW5 0x93 +#define CS29_SW5 0x94 +#define CS30_SW5 0x95 + +#define CS1_SW6 0x96 +#define CS2_SW6 0x97 +#define CS3_SW6 0x98 +#define CS4_SW6 0x99 +#define CS5_SW6 0x9A +#define CS6_SW6 0x9B +#define CS7_SW6 0x9C +#define CS8_SW6 0x9D +#define CS9_SW6 0x9E +#define CS10_SW6 0x9F +#define CS11_SW6 0xA0 +#define CS12_SW6 0xA1 +#define CS13_SW6 0xA2 +#define CS14_SW6 0xA3 +#define CS15_SW6 0xA4 +#define CS16_SW6 0xA5 +#define CS17_SW6 0xA6 +#define CS18_SW6 0xA7 +#define CS19_SW6 0xA8 +#define CS20_SW6 0xA9 +#define CS21_SW6 0xAA +#define CS22_SW6 0xAB +#define CS23_SW6 0xAC +#define CS24_SW6 0xAD +#define CS25_SW6 0xAE +#define CS26_SW6 0xAF +#define CS27_SW6 0xB0 +#define CS28_SW6 0xB1 +#define CS29_SW6 0xB2 +#define CS30_SW6 0xB3 diff --git a/drivers/led/issi/is31fl3743.h b/drivers/led/issi/is31fl3743.h new file mode 100644 index 0000000000..d8fcd79096 --- /dev/null +++ b/drivers/led/issi/is31fl3743.h @@ -0,0 +1,327 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2020 MelGeek + * Copyright 2021 MasterSpoon + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b010(ADDR2)(ADDR1) +#ifndef DRIVER_ADDR_1 +# define DRIVER_ADDR_1 0b0100000 +#endif + +// Set defaults for Spread Spectrum Register +#ifndef ISSI_SSR_1 +# if DRIVER_COUNT == 1 +# define ISSI_SSR_1 0x00 +# else +# define ISSI_SSR_1 0xC0 +# endif +#endif +#ifndef ISSI_SSR_2 +# define ISSI_SSR_2 0x80 +#endif +#ifndef ISSI_SSR_3 +# define ISSI_SSR_3 0x80 +#endif +#ifndef ISSI_SSR_4 +# define ISSI_SSR_4 0x80 +#endif + +// Command Registers +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_IDREGISTER 0xFC +#define ISSI_REGISTER_UNLOCK 0xC5 + +// Response Registers +#define ISSI_PAGE_PWM 0x00 +#define ISSI_PAGE_SCALING 0x01 +#define ISSI_PAGE_FUNCTION 0x02 + +// Registers under Function Register +#define ISSI_REG_CONFIGURATION 0x00 +#define ISSI_REG_GLOBALCURRENT 0x01 +#define ISSI_REG_PULLDOWNUP 0x02 +#define ISSI_REG_TEMP 0x24 +#define ISSI_REG_SSR 0x25 +#define ISSI_REG_RESET 0x2F + +// Set defaults for Function Registers +#ifndef ISSI_CONFIGURATION +# define ISSI_CONFIGURATION 0x01 +#endif +#ifndef ISSI_GLOBALCURRENT +# define ISSI_GLOBALCURRENT 0xFF +#endif +#ifndef ISSI_PULLDOWNUP +# define ISSI_PULLDOWNUP 0x33 +#endif +#ifndef ISSI_TEMP +# define ISSI_TEMP 0x00 +#endif + +// Set defaults for Scaling registers +#ifndef ISSI_SCAL_RED +# define ISSI_SCAL_RED 0xFF +#endif +#ifndef ISSI_SCAL_BLUE +# define ISSI_SCAL_BLUE 0xFF +#endif +#ifndef ISSI_SCAL_GREEN +# define ISSI_SCAL_GREEN 0xFF +#endif +#define ISSI_SCAL_RED_OFF 0x00 +#define ISSI_SCAL_GREEN_OFF 0x00 +#define ISSI_SCAL_BLUE_OFF 0x00 + +#ifndef ISSI_SCAL_LED +# define ISSI_SCAL_LED 0xFF +#endif +#define ISSI_SCAL_LED_OFF 0x00 + +// Set buffer sizes +#define ISSI_MAX_LEDS 198 +#define ISSI_SCALING_SIZE 198 +#define ISSI_PWM_TRF_SIZE 18 +#define ISSI_SCALING_TRF_SIZE 18 + +// Location of 1st bit for PWM and Scaling registers +#define ISSI_PWM_REG_1ST 0x01 +#define ISSI_SCL_REG_1ST 0x01 + +// Map CS SW locations to order in PWM / Scaling buffers +// This matches the ORDER in the Datasheet Register not the POSITION +// It will always count from 0x00 to (ISSI_MAX_LEDS - 1) +#define CS1_SW1 0x00 +#define CS2_SW1 0x01 +#define CS3_SW1 0x02 +#define CS4_SW1 0x03 +#define CS5_SW1 0x04 +#define CS6_SW1 0x05 +#define CS7_SW1 0x06 +#define CS8_SW1 0x07 +#define CS9_SW1 0x08 +#define CS10_SW1 0x09 +#define CS11_SW1 0x0A +#define CS12_SW1 0x0B +#define CS13_SW1 0x0C +#define CS14_SW1 0x0D +#define CS15_SW1 0x0E +#define CS16_SW1 0x0F +#define CS17_SW1 0x10 +#define CS18_SW1 0x11 + +#define CS1_SW2 0x12 +#define CS2_SW2 0x13 +#define CS3_SW2 0x14 +#define CS4_SW2 0x15 +#define CS5_SW2 0x16 +#define CS6_SW2 0x17 +#define CS7_SW2 0x18 +#define CS8_SW2 0x19 +#define CS9_SW2 0x1A +#define CS10_SW2 0x1B +#define CS11_SW2 0x1C +#define CS12_SW2 0x1D +#define CS13_SW2 0x1E +#define CS14_SW2 0x1F +#define CS15_SW2 0x20 +#define CS16_SW2 0x21 +#define CS17_SW2 0x22 +#define CS18_SW2 0x23 + +#define CS1_SW3 0x24 +#define CS2_SW3 0x25 +#define CS3_SW3 0x26 +#define CS4_SW3 0x27 +#define CS5_SW3 0x28 +#define CS6_SW3 0x29 +#define CS7_SW3 0x2A +#define CS8_SW3 0x2B +#define CS9_SW3 0x2C +#define CS10_SW3 0x2D +#define CS11_SW3 0x2E +#define CS12_SW3 0x2F +#define CS13_SW3 0x30 +#define CS14_SW3 0x31 +#define CS15_SW3 0x32 +#define CS16_SW3 0x33 +#define CS17_SW3 0x34 +#define CS18_SW3 0x35 + +#define CS1_SW4 0x36 +#define CS2_SW4 0x37 +#define CS3_SW4 0x38 +#define CS4_SW4 0x39 +#define CS5_SW4 0x3A +#define CS6_SW4 0x3B +#define CS7_SW4 0x3C +#define CS8_SW4 0x3D +#define CS9_SW4 0x3E +#define CS10_SW4 0x3F +#define CS11_SW4 0x40 +#define CS12_SW4 0x41 +#define CS13_SW4 0x42 +#define CS14_SW4 0x43 +#define CS15_SW4 0x44 +#define CS16_SW4 0x45 +#define CS17_SW4 0x46 +#define CS18_SW4 0x47 + +#define CS1_SW5 0x48 +#define CS2_SW5 0x49 +#define CS3_SW5 0x4A +#define CS4_SW5 0x4B +#define CS5_SW5 0x4C +#define CS6_SW5 0x4D +#define CS7_SW5 0x4E +#define CS8_SW5 0x4F +#define CS9_SW5 0x50 +#define CS10_SW5 0x51 +#define CS11_SW5 0x52 +#define CS12_SW5 0x53 +#define CS13_SW5 0x54 +#define CS14_SW5 0x55 +#define CS15_SW5 0x56 +#define CS16_SW5 0x57 +#define CS17_SW5 0x58 +#define CS18_SW5 0x59 + +#define CS1_SW6 0x5A +#define CS2_SW6 0x5B +#define CS3_SW6 0x5C +#define CS4_SW6 0x5D +#define CS5_SW6 0x5E +#define CS6_SW6 0x5F +#define CS7_SW6 0x60 +#define CS8_SW6 0x61 +#define CS9_SW6 0x62 +#define CS10_SW6 0x63 +#define CS11_SW6 0x64 +#define CS12_SW6 0x65 +#define CS13_SW6 0x66 +#define CS14_SW6 0x67 +#define CS15_SW6 0x68 +#define CS16_SW6 0x69 +#define CS17_SW6 0x6A +#define CS18_SW6 0x6B + +#define CS1_SW7 0x6C +#define CS2_SW7 0x6D +#define CS3_SW7 0x6E +#define CS4_SW7 0x6F +#define CS5_SW7 0x70 +#define CS6_SW7 0x71 +#define CS7_SW7 0x72 +#define CS8_SW7 0x73 +#define CS9_SW7 0x74 +#define CS10_SW7 0x75 +#define CS11_SW7 0x76 +#define CS12_SW7 0x77 +#define CS13_SW7 0x78 +#define CS14_SW7 0x79 +#define CS15_SW7 0x7A +#define CS16_SW7 0x7B +#define CS17_SW7 0x7C +#define CS18_SW7 0x7D + +#define CS1_SW8 0x7E +#define CS2_SW8 0x7F +#define CS3_SW8 0x80 +#define CS4_SW8 0x81 +#define CS5_SW8 0x82 +#define CS6_SW8 0x83 +#define CS7_SW8 0x84 +#define CS8_SW8 0x85 +#define CS9_SW8 0x86 +#define CS10_SW8 0x87 +#define CS11_SW8 0x88 +#define CS12_SW8 0x89 +#define CS13_SW8 0x8A +#define CS14_SW8 0x8B +#define CS15_SW8 0x8C +#define CS16_SW8 0x8D +#define CS17_SW8 0x8E +#define CS18_SW8 0x8F + +#define CS1_SW9 0x90 +#define CS2_SW9 0x91 +#define CS3_SW9 0x92 +#define CS4_SW9 0x93 +#define CS5_SW9 0x94 +#define CS6_SW9 0x95 +#define CS7_SW9 0x96 +#define CS8_SW9 0x97 +#define CS9_SW9 0x98 +#define CS10_SW9 0x99 +#define CS11_SW9 0x9A +#define CS12_SW9 0x9B +#define CS13_SW9 0x9C +#define CS14_SW9 0x9D +#define CS15_SW9 0x9E +#define CS16_SW9 0x9F +#define CS17_SW9 0xA0 +#define CS18_SW9 0xA1 + +#define CS1_SW10 0xA2 +#define CS2_SW10 0xA3 +#define CS3_SW10 0xA4 +#define CS4_SW10 0xA5 +#define CS5_SW10 0xA6 +#define CS6_SW10 0xA7 +#define CS7_SW10 0xA8 +#define CS8_SW10 0xA9 +#define CS9_SW10 0xAA +#define CS10_SW10 0xAB +#define CS11_SW10 0xAC +#define CS12_SW10 0xAD +#define CS13_SW10 0xAE +#define CS14_SW10 0xAF +#define CS15_SW10 0xB0 +#define CS16_SW10 0xB1 +#define CS17_SW10 0xB2 +#define CS18_SW10 0xB3 + +#define CS1_SW11 0xB4 +#define CS2_SW11 0xB5 +#define CS3_SW11 0xB6 +#define CS4_SW11 0xB7 +#define CS5_SW11 0xB8 +#define CS6_SW11 0xB9 +#define CS7_SW11 0xBA +#define CS8_SW11 0xBB +#define CS9_SW11 0xBC +#define CS10_SW11 0xBD +#define CS11_SW11 0xBE +#define CS12_SW11 0xBF +#define CS13_SW11 0xC0 +#define CS14_SW11 0xC1 +#define CS15_SW11 0xC2 +#define CS16_SW11 0xC3 +#define CS17_SW11 0xC4 +#define CS18_SW11 0xC5 diff --git a/drivers/led/issi/is31fl3745.h b/drivers/led/issi/is31fl3745.h new file mode 100644 index 0000000000..ca5dd4a986 --- /dev/null +++ b/drivers/led/issi/is31fl3745.h @@ -0,0 +1,270 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2020 MelGeek + * Copyright 2021 MasterSpoon + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b010(ADDR2)(ADDR1) +#ifndef DRIVER_ADDR_1 +# define DRIVER_ADDR_1 0b0100000 +#endif + +// Set defaults for Spread Spectrum Register +#ifndef ISSI_SSR_1 +# if DRIVER_COUNT == 1 +# define ISSI_SSR_1 0x00 +# else +# define ISSI_SSR_1 0xC0 +# endif +#endif +#ifndef ISSI_SSR_2 +# define ISSI_SSR_2 0x80 +#endif +#ifndef ISSI_SSR_3 +# define ISSI_SSR_3 0x80 +#endif +#ifndef ISSI_SSR_4 +# define ISSI_SSR_4 0x80 +#endif + +// Command Registers +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_IDREGISTER 0xFC +#define ISSI_REGISTER_UNLOCK 0xC5 + +// Response Registers +#define ISSI_PAGE_PWM 0x00 +#define ISSI_PAGE_SCALING 0x01 +#define ISSI_PAGE_FUNCTION 0x02 + +// Registers under Function Register +#define ISSI_REG_CONFIGURATION 0x00 +#define ISSI_REG_GLOBALCURRENT 0x01 +#define ISSI_REG_PULLDOWNUP 0x02 +#define ISSI_REG_TEMP 0x24 +#define ISSI_REG_SSR 0x25 +#define ISSI_REG_RESET 0x2F + +// Set defaults for Function Registers +#ifndef ISSI_CONFIGURATION +# define ISSI_CONFIGURATION 0x31 +#endif +#ifndef ISSI_GLOBALCURRENT +# define ISSI_GLOBALCURRENT 0xFF +#endif +#ifndef ISSI_PULLDOWNUP +# define ISSI_PULLDOWNUP 0x33 +#endif +#ifndef ISSI_TEMP +# define ISSI_TEMP 0x00 +#endif + +// Set defaults for Scaling registers +#ifndef ISSI_SCAL_RED +# define ISSI_SCAL_RED 0xFF +#endif +#ifndef ISSI_SCAL_BLUE +# define ISSI_SCAL_BLUE 0xFF +#endif +#ifndef ISSI_SCAL_GREEN +# define ISSI_SCAL_GREEN 0xFF +#endif +#define ISSI_SCAL_RED_OFF 0x00 +#define ISSI_SCAL_GREEN_OFF 0x00 +#define ISSI_SCAL_BLUE_OFF 0x00 + +#ifndef ISSI_SCAL_LED +# define ISSI_SCAL_LED 0xFF +#endif +#define ISSI_SCAL_LED_OFF 0x00 + +// Set buffer sizes +#define ISSI_MAX_LEDS 144 +#define ISSI_SCALING_SIZE 144 +#define ISSI_PWM_TRF_SIZE 18 +#define ISSI_SCALING_TRF_SIZE 18 + +// Location of 1st bit for PWM and Scaling registers +#define ISSI_PWM_REG_1ST 0x01 +#define ISSI_SCL_REG_1ST 0x01 + +// Map CS SW locations to order in PWM / Scaling buffers +// This matches the ORDER in the Datasheet Register not the POSITION +// It will always count from 0x00 to (ISSI_MAX_LEDS - 1) +#define CS1_SW1 0x00 +#define CS2_SW1 0x01 +#define CS3_SW1 0x02 +#define CS4_SW1 0x03 +#define CS5_SW1 0x04 +#define CS6_SW1 0x05 +#define CS7_SW1 0x06 +#define CS8_SW1 0x07 +#define CS9_SW1 0x08 +#define CS10_SW1 0x09 +#define CS11_SW1 0x0A +#define CS12_SW1 0x0B +#define CS13_SW1 0x0C +#define CS14_SW1 0x0D +#define CS15_SW1 0x0E +#define CS16_SW1 0x0F +#define CS17_SW1 0x10 +#define CS18_SW1 0x11 + +#define CS1_SW2 0x12 +#define CS2_SW2 0x13 +#define CS3_SW2 0x14 +#define CS4_SW2 0x15 +#define CS5_SW2 0x16 +#define CS6_SW2 0x17 +#define CS7_SW2 0x18 +#define CS8_SW2 0x19 +#define CS9_SW2 0x1A +#define CS10_SW2 0x1B +#define CS11_SW2 0x1C +#define CS12_SW2 0x1D +#define CS13_SW2 0x1E +#define CS14_SW2 0x1F +#define CS15_SW2 0x20 +#define CS16_SW2 0x21 +#define CS17_SW2 0x22 +#define CS18_SW2 0x23 + +#define CS1_SW3 0x24 +#define CS2_SW3 0x25 +#define CS3_SW3 0x26 +#define CS4_SW3 0x27 +#define CS5_SW3 0x28 +#define CS6_SW3 0x29 +#define CS7_SW3 0x2A +#define CS8_SW3 0x2B +#define CS9_SW3 0x2C +#define CS10_SW3 0x2D +#define CS11_SW3 0x2E +#define CS12_SW3 0x2F +#define CS13_SW3 0x30 +#define CS14_SW3 0x31 +#define CS15_SW3 0x32 +#define CS16_SW3 0x33 +#define CS17_SW3 0x34 +#define CS18_SW3 0x35 + +#define CS1_SW4 0x36 +#define CS2_SW4 0x37 +#define CS3_SW4 0x38 +#define CS4_SW4 0x39 +#define CS5_SW4 0x3A +#define CS6_SW4 0x3B +#define CS7_SW4 0x3C +#define CS8_SW4 0x3D +#define CS9_SW4 0x3E +#define CS10_SW4 0x3F +#define CS11_SW4 0x40 +#define CS12_SW4 0x41 +#define CS13_SW4 0x42 +#define CS14_SW4 0x43 +#define CS15_SW4 0x44 +#define CS16_SW4 0x45 +#define CS17_SW4 0x46 +#define CS18_SW4 0x47 + +#define CS1_SW5 0x48 +#define CS2_SW5 0x49 +#define CS3_SW5 0x4A +#define CS4_SW5 0x4B +#define CS5_SW5 0x4C +#define CS6_SW5 0x4D +#define CS7_SW5 0x4E +#define CS8_SW5 0x4F +#define CS9_SW5 0x50 +#define CS10_SW5 0x51 +#define CS11_SW5 0x52 +#define CS12_SW5 0x53 +#define CS13_SW5 0x54 +#define CS14_SW5 0x55 +#define CS15_SW5 0x56 +#define CS16_SW5 0x57 +#define CS17_SW5 0x58 +#define CS18_SW5 0x59 + +#define CS1_SW6 0x5A +#define CS2_SW6 0x5B +#define CS3_SW6 0x5C +#define CS4_SW6 0x5D +#define CS5_SW6 0x5E +#define CS6_SW6 0x5F +#define CS7_SW6 0x60 +#define CS8_SW6 0x61 +#define CS9_SW6 0x62 +#define CS10_SW6 0x63 +#define CS11_SW6 0x64 +#define CS12_SW6 0x65 +#define CS13_SW6 0x66 +#define CS14_SW6 0x67 +#define CS15_SW6 0x68 +#define CS16_SW6 0x69 +#define CS17_SW6 0x6A +#define CS18_SW6 0x6B + +#define CS1_SW7 0x6C +#define CS2_SW7 0x6D +#define CS3_SW7 0x6E +#define CS4_SW7 0x6F +#define CS5_SW7 0x70 +#define CS6_SW7 0x71 +#define CS7_SW7 0x72 +#define CS8_SW7 0x73 +#define CS9_SW7 0x74 +#define CS10_SW7 0x75 +#define CS11_SW7 0x76 +#define CS12_SW7 0x77 +#define CS13_SW7 0x78 +#define CS14_SW7 0x79 +#define CS15_SW7 0x7A +#define CS16_SW7 0x7B +#define CS17_SW7 0x7C +#define CS18_SW7 0x7D + +#define CS1_SW8 0x7E +#define CS2_SW8 0x7F +#define CS3_SW8 0x80 +#define CS4_SW8 0x81 +#define CS5_SW8 0x82 +#define CS6_SW8 0x83 +#define CS7_SW8 0x84 +#define CS8_SW8 0x85 +#define CS9_SW8 0x86 +#define CS10_SW8 0x87 +#define CS11_SW8 0x88 +#define CS12_SW8 0x89 +#define CS13_SW8 0x8A +#define CS14_SW8 0x8B +#define CS15_SW8 0x8C +#define CS16_SW8 0x8D +#define CS17_SW8 0x8E +#define CS18_SW8 0x8F diff --git a/drivers/led/issi/is31fl3746.h b/drivers/led/issi/is31fl3746.h new file mode 100644 index 0000000000..f89f281533 --- /dev/null +++ b/drivers/led/issi/is31fl3746.h @@ -0,0 +1,198 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2020 MelGeek + * Copyright 2021 MasterSpoon + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b110(ADDR2)(ADDR1) +#ifndef DRIVER_ADDR_1 +# define DRIVER_ADDR_1 0b1100000 +#endif + +// Set defaults for Spread Spectrum Register +#ifndef ISSI_SSR_1 +# define ISSI_SSR_1 0x00 +#endif +#ifndef ISSI_SSR_2 +# define ISSI_SSR_2 0x00 +#endif +#ifndef ISSI_SSR_3 +# define ISSI_SSR_3 0x00 +#endif +#ifndef ISSI_SSR_4 +# define ISSI_SSR_4 0x00 +#endif + +// Command Registers +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_IDREGISTER 0xFC +#define ISSI_REGISTER_UNLOCK 0xC5 + +// Response Registers +#define ISSI_PAGE_PWM 0x00 +#define ISSI_PAGE_SCALING 0x01 +#define ISSI_PAGE_FUNCTION 0x01 + +// Registers under Function Register +#define ISSI_REG_CONFIGURATION 0x50 +#define ISSI_REG_GLOBALCURRENT 0x51 +#define ISSI_REG_PULLDOWNUP 0x52 +#define ISSI_REG_TEMP 0x5F +#define ISSI_REG_SSR 0x60 +#define ISSI_REG_RESET 0x8F +#define ISSI_REG_PWM_ENABLE 0xE0 +#define ISSI_REG_PWM_SET 0xE2 + +// Set defaults for Function Registers +#ifndef ISSI_CONFIGURATION +# define ISSI_CONFIGURATION 0x01 +#endif +#ifndef ISSI_GLOBALCURRENT +# define ISSI_GLOBALCURRENT 0xFF +#endif +#ifndef ISSI_PULLDOWNUP +# define ISSI_PULLDOWNUP 0x33 +#endif +#ifndef ISSI_TEMP +# define ISSI_TEMP 0x00 +#endif +#ifndef ISSI_PWM_ENABLE +# define ISSI_PWM_ENABLE 0x00 +#endif +#ifndef ISSI_PWM_SET +# define ISSI_PWM_SET 0x00 +#endif + +// Set defaults for Scaling registers +#ifndef ISSI_SCAL_RED +# define ISSI_SCAL_RED 0xFF +#endif +#ifndef ISSI_SCAL_BLUE +# define ISSI_SCAL_BLUE 0xFF +#endif +#ifndef ISSI_SCAL_GREEN +# define ISSI_SCAL_GREEN 0xFF +#endif +#define ISSI_SCAL_RED_OFF 0x00 +#define ISSI_SCAL_GREEN_OFF 0x00 +#define ISSI_SCAL_BLUE_OFF 0x00 + +#ifndef ISSI_SCAL_LED +# define ISSI_SCAL_LED 0xFF +#endif +#define ISSI_SCAL_LED_OFF 0x00 + +// Set buffer sizes +#define ISSI_MAX_LEDS 72 +#define ISSI_SCALING_SIZE 72 +#define ISSI_PWM_TRF_SIZE 18 +#define ISSI_SCALING_TRF_SIZE 18 + +// Location of 1st bit for PWM and Scaling registers +#define ISSI_PWM_REG_1ST 0x01 +#define ISSI_SCL_REG_1ST 0x01 + +// Map CS SW locations to order in PWM / Scaling buffers +// This matches the ORDER in the Datasheet Register not the POSITION +// It will always count from 0x00 to (ISSI_MAX_LEDS - 1) +#define CS1_SW1 0x00 +#define CS2_SW1 0x01 +#define CS3_SW1 0x02 +#define CS4_SW1 0x03 +#define CS5_SW1 0x04 +#define CS6_SW1 0x05 +#define CS7_SW1 0x06 +#define CS8_SW1 0x07 +#define CS9_SW1 0x08 +#define CS10_SW1 0x09 +#define CS11_SW1 0x0A +#define CS12_SW1 0x0B +#define CS13_SW1 0x0C +#define CS14_SW1 0x0D +#define CS15_SW1 0x0E +#define CS16_SW1 0x0F +#define CS17_SW1 0x10 +#define CS18_SW1 0x11 + +#define CS1_SW2 0x12 +#define CS2_SW2 0x13 +#define CS3_SW2 0x14 +#define CS4_SW2 0x15 +#define CS5_SW2 0x16 +#define CS6_SW2 0x17 +#define CS7_SW2 0x18 +#define CS8_SW2 0x19 +#define CS9_SW2 0x1A +#define CS10_SW2 0x1B +#define CS11_SW2 0x1C +#define CS12_SW2 0x1D +#define CS13_SW2 0x1E +#define CS14_SW2 0x1F +#define CS15_SW2 0x20 +#define CS16_SW2 0x21 +#define CS17_SW2 0x22 +#define CS18_SW2 0x23 + +#define CS1_SW3 0x24 +#define CS2_SW3 0x25 +#define CS3_SW3 0x26 +#define CS4_SW3 0x27 +#define CS5_SW3 0x28 +#define CS6_SW3 0x29 +#define CS7_SW3 0x2A +#define CS8_SW3 0x2B +#define CS9_SW3 0x2C +#define CS10_SW3 0x2D +#define CS11_SW3 0x2E +#define CS12_SW3 0x2F +#define CS13_SW3 0x30 +#define CS14_SW3 0x31 +#define CS15_SW3 0x32 +#define CS16_SW3 0x33 +#define CS17_SW3 0x34 +#define CS18_SW3 0x35 + +#define CS1_SW4 0x36 +#define CS2_SW4 0x37 +#define CS3_SW4 0x38 +#define CS4_SW4 0x39 +#define CS5_SW4 0x3A +#define CS6_SW4 0x3B +#define CS7_SW4 0x3C +#define CS8_SW4 0x3D +#define CS9_SW4 0x3E +#define CS10_SW4 0x3F +#define CS11_SW4 0x40 +#define CS12_SW4 0x41 +#define CS13_SW4 0x42 +#define CS14_SW4 0x43 +#define CS15_SW4 0x44 +#define CS16_SW4 0x45 +#define CS17_SW4 0x46 +#define CS18_SW4 0x47 diff --git a/drivers/led/issi/is31flcommon.c b/drivers/led/issi/is31flcommon.c new file mode 100644 index 0000000000..9f4b2123ff --- /dev/null +++ b/drivers/led/issi/is31flcommon.c @@ -0,0 +1,230 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2020 MelGeek + * Copyright 2021 MasterSpoon + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "is31flcommon.h" +#include "i2c_master.h" +#include "wait.h" +#include <string.h> + +// Set defaults for Timeout and Persistence +#ifndef ISSI_TIMEOUT +# define ISSI_TIMEOUT 100 +#endif +#ifndef ISSI_PERSISTENCE +# define ISSI_PERSISTENCE 0 +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the PWM & scaling registers. +// Storing them like this is optimal for I2C transfers to the registers. +uint8_t g_pwm_buffer[DRIVER_COUNT][ISSI_MAX_LEDS]; +bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; + +uint8_t g_scaling_buffer[DRIVER_COUNT][ISSI_SCALING_SIZE]; +bool g_scaling_buffer_update_required[DRIVER_COUNT] = {false}; + +// For writing of single register entry +void IS31FL_write_single_register(uint8_t addr, uint8_t reg, uint8_t data) { + // Set register address and register data ready to write + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + +#if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) break; + } +#else + i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT); +#endif +} + +// For writing of mulitple register entries to make use of address auto increment +// Once the controller has been called and we have written the first bit of data +// the controller will move to the next register meaning we can write sequential blocks. +bool IS31FL_write_multi_registers(uint8_t addr, uint8_t *source_buffer, uint8_t buffer_size, uint8_t transfer_size, uint8_t start_reg_addr) { + // Split the buffer into chunks to transfer + for (int i = 0; i < buffer_size; i += transfer_size) { + // Set the first entry of transfer buffer to the first register we want to write + g_twi_transfer_buffer[0] = i + start_reg_addr; + // Copy the section of our source buffer into the transfer buffer after first register address + memcpy(g_twi_transfer_buffer + 1, source_buffer + i, transfer_size); + +#if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, transfer_size + 1, ISSI_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, transfer_size + 1, ISSI_TIMEOUT) != 0) { + return false; + } +#endif + } + return true; +} + +void IS31FL_unlock_register(uint8_t addr, uint8_t page) { + // unlock the command register and select Page to write + IS31FL_write_single_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, ISSI_REGISTER_UNLOCK); + IS31FL_write_single_register(addr, ISSI_COMMANDREGISTER, page); +} + +void IS31FL_common_init(uint8_t addr, uint8_t ssr) { + // Setup phase, need to take out of software shutdown and configure + // ISSI_SSR_x is passed to allow Master / Slave setting where applicable + + // Unlock the command register & select Function Register + IS31FL_unlock_register(addr, ISSI_PAGE_FUNCTION); + // Set Configuration Register to remove Software shutdown + IS31FL_write_single_register(addr, ISSI_REG_CONFIGURATION, ISSI_CONFIGURATION); + // Set Golbal Current Control Register + IS31FL_write_single_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT); + // Set Pull up & Down for SWx CSy + IS31FL_write_single_register(addr, ISSI_REG_PULLDOWNUP, ISSI_PULLDOWNUP); +// Set Tempature Status +#ifdef ISSI_REG_TEMP + IS31FL_write_single_register(addr, ISSI_REG_TEMP, ISSI_TEMP); +#endif + // Set Spread Spectrum Register, passed through as sets SYNC function + IS31FL_write_single_register(addr, ISSI_REG_SSR, ssr); +// Set PWM Frequency Enable Register if applicable +#ifdef ISSI_REG_PWM_ENABLE + IS31FL_write_single_register(addr, ISSI_REG_PWM_ENABLE, ISSI_PWM_ENABLE); +#endif +// Set PWM Frequency Register if applicable +#ifdef ISSI_REG_PWM_SET + IS31FL_write_single_register(addr, ISSI_REG_PWM_SET, ISSI_PWM_SET); +#endif + + // Wait 10ms to ensure the device has woken up. + wait_ms(10); +} + +void IS31FL_common_update_pwm_register(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + // Queue up the correct page + IS31FL_unlock_register(addr, ISSI_PAGE_PWM); + // Hand off the update to IS31FL_write_multi_registers + IS31FL_write_multi_registers(addr, g_pwm_buffer[index], ISSI_MAX_LEDS, ISSI_PWM_TRF_SIZE, ISSI_PWM_REG_1ST); + // Update flags that pwm_buffer has been updated + g_pwm_buffer_update_required[index] = false; + } +} + +#ifdef ISSI_MANUAL_SCALING +void IS31FL_set_manual_scaling_buffer(void) { + for (int i = 0; i < ISSI_MANUAL_SCALING; i++) { + is31_led scale = g_is31_scaling[i]; + if (scale.driver >= 0 && scale.driver < DRIVER_LED_TOTAL) { + is31_led led = g_is31_leds[scale.driver]; + +# ifdef RGB_MATRIX_ENABLE + g_scaling_buffer[led.driver][led.r] = scale.r; + g_scaling_buffer[led.driver][led.g] = scale.g; + g_scaling_buffer[led.driver][led.b] = scale.b; +# elif defined(LED_MATRIX_ENABLE) + g_scaling_buffer[led.driver][led.v] = scale.v; +# endif + g_scaling_buffer_update_required[led.driver] = true; + } + } +} +#endif + +void IS31FL_common_update_scaling_register(uint8_t addr, uint8_t index) { + if (g_scaling_buffer_update_required[index]) { + // Queue up the correct page + IS31FL_unlock_register(addr, ISSI_PAGE_SCALING); + // Hand off the update to IS31FL_write_multi_registers + IS31FL_write_multi_registers(addr, g_scaling_buffer[index], ISSI_SCALING_SIZE, ISSI_SCALING_TRF_SIZE, ISSI_SCL_REG_1ST); + // Update flags that scaling_buffer has been updated + g_scaling_buffer_update_required[index] = false; + } +} + +#ifdef RGB_MATRIX_ENABLE +// Colour is set by adjusting PWM register +void IS31FL_RGB_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + if (index >= 0 && index < DRIVER_LED_TOTAL) { + is31_led led = g_is31_leds[index]; + + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void IS31FL_RGB_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + IS31FL_RGB_set_color(i, red, green, blue); + } +} + +// Setup Scaling register that decides the peak current of each LED +void IS31FL_RGB_set_scaling_buffer(uint8_t index, bool red, bool green, bool blue) { + is31_led led = g_is31_leds[index]; + if (red) { + g_scaling_buffer[led.driver][led.r] = ISSI_SCAL_RED; + } else { + g_scaling_buffer[led.driver][led.r] = ISSI_SCAL_RED_OFF; + } + if (green) { + g_scaling_buffer[led.driver][led.g] = ISSI_SCAL_GREEN; + } else { + g_scaling_buffer[led.driver][led.g] = ISSI_SCAL_GREEN_OFF; + } + if (blue) { + g_scaling_buffer[led.driver][led.b] = ISSI_SCAL_BLUE; + } else { + g_scaling_buffer[led.driver][led.b] = ISSI_SCAL_BLUE_OFF; + } + g_scaling_buffer_update_required[led.driver] = true; +} + +#elif defined(LED_MATRIX_ENABLE) +// LED Matrix Specific scripts +void IS31FL_simple_set_scaling_buffer(uint8_t index, bool value) { + is31_led led = g_is31_leds[index]; + if (value) { + g_scaling_buffer[led.driver][led.v] = ISSI_SCAL_LED; + } else { + g_scaling_buffer[led.driver][led.v] = ISSI_SCAL_LED_OFF; + } + g_scaling_buffer_update_required[led.driver] = true; +} + +void IS31FL_simple_set_brightness(int index, uint8_t value) { + if (index >= 0 && index < DRIVER_LED_TOTAL) { + is31_led led = g_is31_leds[index]; + g_pwm_buffer[led.driver][led.v] = value; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void IS31FL_simple_set_brigntness_all(uint8_t value) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + IS31FL_simple_set_brightness(i, value); + } +} +#endif diff --git a/drivers/led/issi/is31flcommon.h b/drivers/led/issi/is31flcommon.h new file mode 100644 index 0000000000..77e9665e32 --- /dev/null +++ b/drivers/led/issi/is31flcommon.h @@ -0,0 +1,78 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2020 MelGeek + * Copyright 2021 MasterSpoon + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> +#include "progmem.h" + +// Which variant header file to use +#ifdef IS31FL3742A +# include "is31fl3742.h" +#elif defined(IS31FL3743A) +# include "is31fl3743.h" +#elif defined(IS31FL3745) +# include "is31fl3745.h" +#elif defined(IS31FL3746A) +# include "is31fl3746.h" +#endif + +#ifdef RGB_MATRIX_ENABLE +typedef struct is31_led { + uint8_t driver; + uint8_t r; + uint8_t g; + uint8_t b; +} __attribute__((packed)) is31_led; + +#elif defined(LED_MATRIX_ENABLE) +typedef struct is31_led { + uint8_t driver; + uint8_t v; +} __attribute__((packed)) is31_led; +#endif + +#ifdef ISSI_MANUAL_SCALING +extern const is31_led __flash g_is31_scaling[]; +void IS31FL_set_manual_scaling_buffer(void); +#endif + +extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; + +void IS31FL_write_single_register(uint8_t addr, uint8_t reg, uint8_t data); +bool IS31FL_write_multi_registers(uint8_t addr, uint8_t *source_buffer, uint8_t buffer_size, uint8_t transfer_size, uint8_t start_reg_addr); +void IS31FL_unlock_register(uint8_t addr, uint8_t page); +void IS31FL_common_init(uint8_t addr, uint8_t ssr); + +void IS31FL_common_update_pwm_register(uint8_t addr, uint8_t index); +void IS31FL_common_update_scaling_register(uint8_t addr, uint8_t index); + +#ifdef RGB_MATRIX_ENABLE +// RGB Matrix Specific scripts +void IS31FL_RGB_set_color(int index, uint8_t red, uint8_t green, uint8_t blue); +void IS31FL_RGB_set_color_all(uint8_t red, uint8_t green, uint8_t blue); +void IS31FL_RGB_set_scaling_buffer(uint8_t index, bool red, bool green, bool blue); +#elif defined(LED_MATRIX_ENABLE) +// LED Matrix Specific scripts +void IS31FL_simple_set_scaling_buffer(uint8_t index, bool value); +void IS31FL_simple_set_brightness(int index, uint8_t value); +void IS31FL_simple_set_brigntness_all(uint8_t value); +#endif |