diff options
Diffstat (limited to 'docs')
41 files changed, 1520 insertions, 678 deletions
diff --git a/docs/_summary.md b/docs/_summary.md index 102adad795..3a5dfacaa3 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -82,14 +82,13 @@ * [Key Overrides](feature_key_overrides.md) * [Layers](feature_layers.md) * [One Shot Keys](one_shot_keys.md) - * [Pointing Device](feature_pointing_device.md) * [Raw HID](feature_rawhid.md) * [Secure](feature_secure.md) + * [Send String](feature_send_string.md) * [Sequencer](feature_sequencer.md) * [Swap Hands](feature_swap_hands.md) * [Tap Dance](feature_tap_dance.md) * [Tap-Hold Configuration](tap_hold.md) - * [Terminal](feature_terminal.md) * [Unicode](feature_unicode.md) * [Userspace](feature_userspace.md) * [WPM Calculation](feature_wpm.md) @@ -108,6 +107,7 @@ * [Audio](feature_audio.md) * [Bluetooth](feature_bluetooth.md) * [Bootmagic Lite](feature_bootmagic.md) + * [Converters](feature_converters.md) * [Custom Matrix](custom_matrix.md) * [Digitizer](feature_digitizer.md) * [DIP Switch](feature_dip_switch.md) @@ -116,7 +116,7 @@ * [Joystick](feature_joystick.md) * [LED Indicators](feature_led_indicators.md) * [MIDI](feature_midi.md) - * [Proton C Conversion](proton_c_conversion.md) + * [Pointing Device](feature_pointing_device.md) * [PS/2 Mouse](feature_ps2_mouse.md) * [Split Keyboard](feature_split_keyboard.md) * [Stenography](feature_stenography.md) @@ -148,6 +148,7 @@ * [SPI Driver](spi_driver.md) * [WS2812 Driver](ws2812_driver.md) * [EEPROM Driver](eeprom_driver.md) + * [Flash Driver](flash_driver.md) * ['serial' Driver](serial_driver.md) * [UART Driver](uart_driver.md) * [GPIO Controls](gpio_control.md) @@ -166,6 +167,8 @@ * Arm/ChibiOS * [Selecting an MCU](platformdev_selecting_arm_mcu.md) * [Early initialization](platformdev_chibios_earlyinit.md) + * [Raspberry Pi RP2040](platformdev_rp2040.md) + * [Proton C](platformdev_proton_c.md) * [WeAct Blackpill F411](platformdev_blackpill_f411.md) * QMK Reference diff --git a/docs/cli_commands.md b/docs/cli_commands.md index a380d3eb2f..56767d962b 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -352,6 +352,73 @@ $ qmk via2json -kb ai03/polaris -o polaris_keymap.json polaris_via_backup.json Ψ Wrote keymap to /home/you/qmk_firmware/polaris_keymap.json ``` +## `qmk import-keyboard` + +This command imports a data-driven `info.json` keyboard into the repo. + +**Usage**: + +``` +usage: qmk import-keyboard [-h] filename +``` + +**Example:** + +``` +$ qmk import-keyboard ~/Downloads/forever60.json +Ψ Importing forever60.json. + +Ψ Imported a new keyboard named forever60. +Ψ To start working on things, `cd` into keyboards/forever60, +Ψ or open the directory in your preferred text editor. +Ψ And build with qmk compile -kb forever60 -km default. +``` + +## `qmk import-keymap` + +This command imports a data-driven `keymap.json` keymap into the repo. + +**Usage**: + +``` +usage: qmk import-keymap [-h] filename +``` + +**Example:** + +``` +qmk import-keymap ~/Downloads/asdf2.json +Ψ Importing asdf2.json. + +Ψ Imported a new keymap named asdf2. +Ψ To start working on things, `cd` into keyboards/takashicompany/dogtag/keymaps/asdf2, +Ψ or open the directory in your preferred text editor. +Ψ And build with qmk compile -kb takashicompany/dogtag -km asdf2. +``` + +## `qmk import-kbfirmware` + +This command creates a new keyboard based on a [Keyboard Firmware Builder](https://kbfirmware.com/) export. + +**Usage**: + +``` +usage: qmk import-kbfirmware [-h] filename +``` + +**Example:** + +``` +$ qmk import-kbfirmware ~/Downloads/gh62.json +Ψ Importing gh62.json. + +⚠ Support here is basic - Consider using 'qmk new-keyboard' instead +Ψ Imported a new keyboard named gh62. +Ψ To start working on things, `cd` into keyboards/gh62, +Ψ or open the directory in your preferred text editor. +Ψ And build with qmk compile -kb gh62 -km default. +``` + --- # Developer Commands @@ -527,3 +594,4 @@ This command converts a TTF font to an intermediate format for editing, before c ## `qmk painter-convert-font-image` This command converts an intermediate font image to the QFF File Format. See the [Quantum Painter](quantum_painter.md?id=quantum-painter-cli) documentation for more information on this command. + diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index cee8986829..cc9c0b7f92 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -62,9 +62,17 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [MK20DX128](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-50-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-based-on-arm-cortex-m4-core:K20_50) * [MK20DX256](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-72-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-mcus-based-on-arm-cortex-m4-core:K20_72) * PJRC Teensy 3.2 + * [MK64FX512](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k6x-ethernet/kinetis-k64-120-mhz-256-kb-sram-microcontrollers-mcus-based-on-arm-cortex-m4-core:K64_120) + * PJRC Teensy 3.5 * [MK66FX1M0](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k6x-ethernet/kinetis-k66-180-mhz-dual-high-speed-full-speed-usbs-2mb-flash-microcontrollers-mcus-based-on-arm-cortex-m4-core:K66_180) * PJRC Teensy 3.6 +### Raspberry Pi + +* [RP2040](https://www.raspberrypi.com/documentation/microcontrollers/rp2040.html) + +For a detailed overview about the RP2040 support by QMK see the [dedicated RP2040 page](platformdev_rp2040.md). + ## Atmel ATSAM There is limited support for one of Atmel's ATSAM microcontrollers, that being the [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) used by the [Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop). However, it is not recommended to design a board with this microcontroller as the support is quite specialized to Massdrop hardware. diff --git a/docs/config_options.md b/docs/config_options.md index 8227a0e074..34034f7c8d 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -107,8 +107,10 @@ This is a C header file that is one of the first things included, and will persi * sets the maximum power (in mA) over USB for the device (default: 500) * `#define USB_POLLING_INTERVAL_MS 10` * sets the USB polling rate in milliseconds for the keyboard, mouse, and shared (NKRO/media keys) interfaces -* `#define USB_SUSPEND_WAKEUP_DELAY 200` - * set the number of milliseconde to pause after sending a wakeup packet +* `#define USB_SUSPEND_WAKEUP_DELAY 0` + * sets the number of milliseconds to pause after sending a wakeup packet. + Disabled by default, you might want to set this to 200 (or higher) if the + keyboard does not wake up properly after suspending. * `#define F_SCL 100000L` * sets the I2C clock rate speed for keyboards using I2C. The default is `400000L`, except for keyboards using `split_common`, where the default is `100000L`. @@ -141,7 +143,7 @@ If you define these options you will enable the associated feature, which may in ## Behaviors That Can Be Configured * `#define TAPPING_TERM 200` - * how long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too + * how long before a key press becomes a hold * `#define TAPPING_TERM_PER_KEY` * enables handling for per key `TAPPING_TERM` settings * `#define RETRO_TAPPING` @@ -174,6 +176,8 @@ If you define these options you will enable the associated feature, which may in * sets the timer for leader key chords to run on each key press rather than overall * `#define LEADER_KEY_STRICT_KEY_PROCESSING` * Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify `MT(MOD_CTL, KC_A)` if you want to use `KC_A`. +* `#define MOUSE_EXTENDED_REPORT` + * Enables support for extended reports (-32767 to 32767, instead of -127 to 127), which may allow for smoother reporting, and prevent maxing out of the reports. Applies to both Pointing Device and Mousekeys. * `#define ONESHOT_TIMEOUT 300` * how long before oneshot times out * `#define ONESHOT_TAP_TOGGLE 2` diff --git a/docs/custom_matrix.md b/docs/custom_matrix.md index 8f6878f94a..6d6ae5e972 100644 --- a/docs/custom_matrix.md +++ b/docs/custom_matrix.md @@ -81,17 +81,17 @@ void matrix_init(void) { } uint8_t matrix_scan(void) { - bool matrix_has_changed = false; + bool changed = false; // TODO: add matrix scanning routine here // Unless hardware debouncing - use the configured debounce routine - debounce(raw_matrix, matrix, MATRIX_ROWS, changed); + changed = debounce(raw_matrix, matrix, MATRIX_ROWS, changed); // This *must* be called for correct keyboard behavior matrix_scan_quantum(); - return matrix_has_changed; + return changed; } ``` diff --git a/docs/eeprom_driver.md b/docs/eeprom_driver.md index 6dcf10c04d..50d8bcb7b3 100644 --- a/docs/eeprom_driver.md +++ b/docs/eeprom_driver.md @@ -2,12 +2,15 @@ The EEPROM driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present. +Selecting the EEPROM driver is done in your keyboard's `rules.mk`: + Driver | Description -----------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- `EEPROM_DRIVER = vendor` (default) | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. STM32L0xx and STM32L1xx will use the onboard dedicated true EEPROM. Other chips will generally act as "transient" below. `EEPROM_DRIVER = i2c` | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below. `EEPROM_DRIVER = spi` | Supports writing to SPI-based 25xx EEPROM chips. See the driver section below. `EEPROM_DRIVER = transient` | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost. +`EEPROM_DRIVER = wear_leveling` | Frontend driver for the wear_leveling system, allowing for EEPROM emulation on top of flash -- both in-MCU and external SPI NOR flash. ## Vendor Driver Configuration :id=vendor-eeprom-driver-configuration @@ -43,8 +46,9 @@ Module | Equivalent `#define` | Source -----------------|---------------------------------|------------------------------------------ CAT24C512 EEPROM | `#define EEPROM_I2C_CAT24C512` | <https://www.sparkfun.com/products/14764> RM24C512C EEPROM | `#define EEPROM_I2C_RM24C512C` | <https://www.sparkfun.com/products/14764> -24LC64 EEPROM | `#define EEPROM_I2C_24LC64` | <https://www.microchip.com/wwwproducts/en/24LC64> -24LC128 EEPROM | `#define EEPROM_I2C_24LC128` | <https://www.microchip.com/wwwproducts/en/24LC128> +24LC32A EEPROM | `#define EEPROM_I2C_24LC32A` | <https://www.microchip.com/en-us/product/24LC32A> +24LC64 EEPROM | `#define EEPROM_I2C_24LC64` | <https://www.microchip.com/en-us/product/24LC64> +24LC128 EEPROM | `#define EEPROM_I2C_24LC128` | <https://www.microchip.com/en-us/product/24LC128> 24LC256 EEPROM | `#define EEPROM_I2C_24LC256` | <https://www.sparkfun.com/products/525> MB85RC256V FRAM | `#define EEPROM_I2C_MB85RC256V` | <https://www.adafruit.com/product/1895> @@ -54,13 +58,13 @@ MB85RC256V FRAM | `#define EEPROM_I2C_MB85RC256V` | <https://www.adafruit.com/p Currently QMK supports 25xx-series chips over SPI. As such, requires a working spi_master driver configuration. You can override the driver configuration via your config.h: -`config.h` override | Description | Default Value ------------------------------------------------|--------------------------------------------------------------------------------------|-------------- -`#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN` | SPI Slave select pin in order to inform that the EEPROM is currently being addressed | _none_ -`#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR` | Clock divisor used to divide the peripheral clock to derive the SPI frequency | `64` -`#define EXTERNAL_EEPROM_BYTE_COUNT` | Total size of the EEPROM in bytes | 8192 -`#define EXTERNAL_EEPROM_PAGE_SIZE` | Page size of the EEPROM in bytes, as specified in the datasheet | 32 -`#define EXTERNAL_EEPROM_ADDRESS_SIZE` | The number of bytes to transmit for the memory location within the EEPROM | 2 +`config.h` override | Default Value | Description +-----------------------------------------------|---------------|------------------------------------------------------------------------------------- +`#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN` | _none_ | SPI Slave select pin in order to inform that the EEPROM is currently being addressed +`#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR` | `64` | Clock divisor used to divide the peripheral clock to derive the SPI frequency +`#define EXTERNAL_EEPROM_BYTE_COUNT` | `8192` | Total size of the EEPROM in bytes +`#define EXTERNAL_EEPROM_PAGE_SIZE` | `32` | Page size of the EEPROM in bytes, as specified in the datasheet +`#define EXTERNAL_EEPROM_ADDRESS_SIZE` | `2` | The number of bytes to transmit for the memory location within the EEPROM !> There's no way to determine if there is an SPI EEPROM actually responding. Generally, this will result in reads of nothing but zero. @@ -73,3 +77,84 @@ The only configurable item for the transient EEPROM driver is its size: `#define TRANSIENT_EEPROM_SIZE` | Total size of the EEPROM storage in bytes | 64 Default values and extended descriptions can be found in `drivers/eeprom/eeprom_transient.h`. + +## Wear-leveling Driver Configuration :id=wear_leveling-eeprom-driver-configuration + +The wear-leveling driver uses an algorithm to minimise the number of erase cycles on the underlying MCU flash memory. + +There is no specific configuration for this driver, but the wear-leveling system used by this driver may need configuration. See the [wear-leveling configuration](#wear_leveling-configuration) section for more information. + +# Wear-leveling Configuration :id=wear_leveling-configuration + +The wear-leveling driver has a few possible _backing stores_ that may be used by adding to your keyboard's `rules.mk` file: + +Driver | Description +----------------------------------------|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ +`WEAR_LEVELING_DRIVER = embedded_flash` | This driver is used for emulating EEPROM by writing to embedded flash on the MCU. +`WEAR_LEVELING_DRIVER = spi_flash` | This driver is used to address external SPI NOR Flash peripherals. +`WEAR_LEVELING_DRIVER = rp2040_flash` | This driver is used to write to the same storage the RP2040 executes code from. +`WEAR_LEVELING_DRIVER = legacy` | This driver is the "legacy" emulated EEPROM provided in historical revisions of QMK. Currently used for STM32F0xx and STM32F4x1, but slated for deprecation and removal once `embedded_flash` support for those MCU families is complete. + +!> All wear-leveling drivers require an amount of RAM equivalent to the selected logical EEPROM size. Increasing the size to 32kB of EEPROM requires 32kB of RAM, which a significant number of MCUs simply do not have. + +## Wear-leveling Embedded Flash Driver Configuration :id=wear_leveling-efl-driver-configuration + +This driver performs writes to the embedded flash storage embedded in the MCU. In most circumstances, the last few of sectors of flash are used in order to minimise the likelihood of collision with program code. + +Configurable options in your keyboard's `config.h`: + +`config.h` override | Default | Description +-----------------------------------------|-------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- +`#define WEAR_LEVELING_EFL_FIRST_SECTOR` | _unset_ | The first sector on the MCU to use. By default this is not defined and calculated at runtime based on the MCU. However, different flash sizes on MCUs may require custom configuration. +`#define WEAR_LEVELING_EFL_FLASH_SIZE` | _unset_ | Allows overriding the flash size available for use for wear-leveling. Under normal circumstances this is automatically calculated and should not need to be overridden. Specifying a size larger than the amount actually available in flash will usually prevent the MCU from booting. +`#define WEAR_LEVELING_LOGICAL_SIZE` | `1024` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM. +`#define WEAR_LEVELING_BACKING_SIZE` | `2048` | Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size. +`#define BACKING_STORE_WRITE_SIZE` | _automatic_ | The byte width of the underlying write used on the MCU, and is usually automatically determined from the selected MCU family. If an error occurs in the auto-detection, you'll need to consult the MCU's datasheet and determine this value, specifying it directly. + +!> If your MCU does not boot after swapping to the EFL wear-leveling driver, it's likely that the flash size is incorrectly detected, usually as an MCU with larger flash and may require overriding. + +## Wear-leveling SPI Flash Driver Configuration :id=wear_leveling-flash_spi-driver-configuration + +This driver performs writes to an external SPI NOR Flash peripheral. It also requires a working configuration for the SPI NOR Flash peripheral -- see the [flash driver](flash_driver.md) documentation for more information. + +Configurable options in your keyboard's `config.h`: + +`config.h` override | Default | Description +----------------------------------------------------|--------------------------------|-------------------------------------------------------------------------------------------------------------------------------- +`#define WEAR_LEVELING_EXTERNAL_FLASH_BLOCK_COUNT` | `1` | Number of blocks in the external flash used by the wear-leveling algorithm. +`#define WEAR_LEVELING_EXTERNAL_FLASH_BLOCK_OFFSET` | `0` | The index first block in the external flash used by the wear-leveling algorithm. +`#define WEAR_LEVELING_LOGICAL_SIZE` | `((block_count*block_size)/2)` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM. Result must be <= 64kB. +`#define WEAR_LEVELING_BACKING_SIZE` | `(block_count*block_size)` | Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size. +`#define BACKING_STORE_WRITE_SIZE` | `8` | The write width used whenever a write is performed on the external flash peripheral. + +!> There is currently a limit of 64kB for the EEPROM subsystem within QMK, so using a larger flash is not going to be beneficial as the logical size cannot be increased beyond 65536. The backing size may be increased to a larger value, but erase timing may suffer as a result. + +## Wear-leveling RP2040 Driver Configuration :id=wear_leveling-rp2040-driver-configuration + +This driver performs writes to the same underlying storage that the RP2040 executes its code. + +Configurable options in your keyboard's `config.h`: + +`config.h` override | Default | Description +------------------------------------------|----------------------------|-------------------------------------------------------------------------------------------------------------------------------- +`#define WEAR_LEVELING_RP2040_FLASH_SIZE` | `PICO_FLASH_SIZE_BYTES` | Number of bytes of flash on the board. +`#define WEAR_LEVELING_RP2040_FLASH_BASE` | `(flash_size-sector_size)` | The byte-wise location that the backing storage should be located. +`#define WEAR_LEVELING_LOGICAL_SIZE` | `4096` | Number of bytes "exposed" to the rest of QMK and denotes the size of the usable EEPROM. +`#define WEAR_LEVELING_BACKING_SIZE` | `8192` | Number of bytes used by the wear-leveling algorithm for its underlying storage, and needs to be a multiple of the logical size as well as the sector size. +`#define BACKING_STORE_WRITE_SIZE` | `2` | The write width used whenever a write is performed on the external flash peripheral. + +## Wear-leveling Legacy EEPROM Emulation Driver Configuration :id=wear_leveling-legacy-driver-configuration + +This driver performs writes to the embedded flash storage embedded in the MCU much like the normal Embedded Flash Driver, and is only for use with STM32F0xx and STM32F4x1 devices. This flash implementation is still currently provided as the EFL driver is currently non-functional for the previously mentioned families. + +By default, `1024` bytes of emulated EEPROM is provided: + +MCU | EEPROM Provided | Flash Used +----------|-----------------|-------------- +STM32F042 | `1024` bytes | `2048` bytes +STM32F070 | `1024` bytes | `2048` bytes +STM32F072 | `1024` bytes | `2048` bytes +STM32F401 | `1024` bytes | `16384` bytes +STM32F411 | `1024` bytes | `16384` bytes + +Under normal circumstances configuration of this driver requires intimate knowledge of the MCU's flash structure -- reconfiguration is at your own risk and will require referring to the code. diff --git a/docs/faq_debug.md b/docs/faq_debug.md index fba27c5f68..4a35997222 100644 --- a/docs/faq_debug.md +++ b/docs/faq_debug.md @@ -59,7 +59,7 @@ When porting, or when attempting to diagnose pcb issues, it can be useful to kno bool process_record_user(uint16_t keycode, keyrecord_t *record) { // If console is enabled, it will print the matrix position and status of each key pressed #ifdef CONSOLE_ENABLE - uprintf("KL: kc: 0x%04X, col: %u, row: %u, pressed: %b, time: %u, interrupt: %b, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count); + uprintf("KL: kc: 0x%04X, col: %2u, row: %2u, pressed: %u, time: %5u, int: %u, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count); #endif return true; } @@ -69,12 +69,12 @@ Example output ``` Waiting for device:....... Listening: -KL: kc: 169, col: 0, row: 0, pressed: 1 -KL: kc: 169, col: 0, row: 0, pressed: 0 -KL: kc: 174, col: 1, row: 0, pressed: 1 -KL: kc: 174, col: 1, row: 0, pressed: 0 -KL: kc: 172, col: 2, row: 0, pressed: 1 -KL: kc: 172, col: 2, row: 0, pressed: 0 +KL: kc: 169, col: 0, row: 0, pressed: 1, time: 15505, int: 0, count: 0 +KL: kc: 169, col: 0, row: 0, pressed: 0, time: 15510, int: 0, count: 0 +KL: kc: 174, col: 1, row: 0, pressed: 1, time: 15703, int: 0, count: 0 +KL: kc: 174, col: 1, row: 0, pressed: 0, time: 15843, int: 0, count: 0 +KL: kc: 172, col: 2, row: 0, pressed: 1, time: 16303, int: 0, count: 0 +KL: kc: 172, col: 2, row: 0, pressed: 0, time: 16411, int: 0, count: 0 ``` ### How long did it take to scan for a keypress? diff --git a/docs/feature_converters.md b/docs/feature_converters.md new file mode 100644 index 0000000000..11dcc62b2a --- /dev/null +++ b/docs/feature_converters.md @@ -0,0 +1,98 @@ +# Converters + +Since many drop-in replacement controllers now exist, we've done our best to make them easy to use in existing designs. + +This page documents the handy automated process for converting keyboards. + +### Supported Converters + +Currently the following converters are available: + +| From | To | +|------------|-------------------| +| `promicro` | `proton_c` | +| `promicro` | `kb2040` | +| `promicro` | `promicro_rp2040` | +| `promicro` | `blok` | + +See below for more in depth information on each converter. + +## Overview + +Each converter category is broken down by its declared `pin compatibility`. +This ensures that only valid combinations are attempted. + +You can generate the firmware by appending `-e CONVERT_TO=<target>` to your compile/flash command. For example: + +```sh +qmk flash -c -kb keebio/bdn9/rev1 -km default -e CONVERT_TO=proton_c +``` + +You can also add the same `CONVERT_TO=<target>` to your keymap's `rules.mk`, which will accomplish the same thing. + +?> If you get errors about `PORTB/DDRB`, etc not being defined, you'll need to convert the keyboard's code to use the [GPIO Controls](gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all. + +### Conditional Configuration + +Once a converter is enabled, it exposes the `CONVERT_TO_<target_uppercase>` flag that you can use in your code with `#ifdef`s, For example: + +```c +#ifdef CONVERT_TO_PROTON_C + // Proton C code +#else + // Pro Micro code +#endif +``` + +## Pro Micro + +If a board currently supported in QMK uses a [Pro Micro](https://www.sparkfun.com/products/12640) (or compatible board), the supported alternative controllers are: + +| Device | Target | +|------------------------------------------------------------------------|-------------------| +| [Proton C](https://qmk.fm/proton-c/) | `proton_c` | +| [Adafruit KB2040](https://learn.adafruit.com/adafruit-kb2040) | `kb2040` | +| [SparkFun Pro Micro - RP2040](https://www.sparkfun.com/products/18288) | `promicro_rp2040` | +| [Blok](https://boardsource.xyz/store/628b95b494dfa308a6581622) | `blok` | + +Converter summary: + +| Target | Argument | `rules.mk` | Condition | +|-------------------|---------------------------------|------------------------------|-------------------------------------| +| `proton_c` | `-e CONVERT_TO=proton_c` | `CONVERT_TO=proton_c` | `#ifdef CONVERT_TO_PROTON_C` | +| `kb2040` | `-e CONVERT_TO=kb2040` | `CONVERT_TO=kb2040` | `#ifdef CONVERT_TO_KB2040` | +| `promicro_rp2040` | `-e CONVERT_TO=promicro_rp2040` | `CONVERT_TO=promicro_rp2040` | `#ifdef CONVERT_TO_PROMICRO_RP2040` | +| `blok` | `-e CONVERT_TO=blok` | `CONVERT_TO=blok` | `#ifdef CONVERT_TO_BLOK` | + +### Proton C :id=proton_c + +The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is mapped to it. If you want the RXLED (B0) mapped to it instead, add this line to your `config.h`: + +```c +#define CONVERT_TO_PROTON_C_RXLED +``` + +The following defaults are based on what has been implemented for STM32 boards. + +| Feature | Notes | +|----------------------------------------------|------------------------------------------------------------------------------------------------------------------| +| [Audio](feature_audio.md) | Enabled | +| [RGB Lighting](feature_rgblight.md) | Disabled | +| [Backlight](feature_backlight.md) | Forces [task driven PWM](feature_backlight.md#software-pwm-driver) until ARM can provide automatic configuration | +| USB Host (e.g. USB-USB converter) | Not supported (USB host code is AVR specific and is not currently supported on ARM) | +| [Split keyboards](feature_split_keyboard.md) | Partial - heavily dependent on enabled features | + +### Adafruit KB2040 :id=kb2040 + +The following defaults are based on what has been implemented for [RP2040](platformdev_rp2040.md) boards. + +| Feature | Notes | +|----------------------------------------------|------------------------------------------------------------------------------------------------------------------| +| [RGB Lighting](feature_rgblight.md) | Enabled via `PIO` vendor driver | +| [Backlight](feature_backlight.md) | Forces [task driven PWM](feature_backlight.md#software-pwm-driver) until ARM can provide automatic configuration | +| USB Host (e.g. USB-USB converter) | Not supported (USB host code is AVR specific and is not currently supported on ARM) | +| [Split keyboards](feature_split_keyboard.md) | Partial via `PIO` vendor driver - heavily dependent on enabled features | + +### SparkFun Pro Micro - RP2040 and Blok :id=promicro_rp2040 + +Currently identical to [Adafruit KB2040](#kb2040). diff --git a/docs/feature_dynamic_macros.md b/docs/feature_dynamic_macros.md index 01f2a0ca40..0660e0c065 100644 --- a/docs/feature_dynamic_macros.md +++ b/docs/feature_dynamic_macros.md @@ -35,6 +35,7 @@ There are a number of options added that should allow some additional degree of |`DYNAMIC_MACRO_SIZE` |128 |Sets the amount of memory that Dynamic Macros can use. This is a limited resource, dependent on the controller. | |`DYNAMIC_MACRO_USER_CALL` |*Not defined* |Defining this falls back to using the user `keymap.c` file to trigger the macro behavior. | |`DYNAMIC_MACRO_NO_NESTING` |*Not Defined* |Defining this disables the ability to call a macro from another macro (nested macros). | +|`DYNAMIC_MACRO_DELAY` |*Not Defined* |Sets the waiting time (ms unit) when sending each key. | If the LEDs start blinking during the recording with each keypress, it means there is no more space for the macro in the macro buffer. To fit the macro in, either make the other macro shorter (they share the same buffer) or increase the buffer size by adding the `DYNAMIC_MACRO_SIZE` define in your `config.h` (default value: 128; please read the comments for it in the header). diff --git a/docs/feature_macros.md b/docs/feature_macros.md index 78bc4ba0a5..f5bd5be41b 100644 --- a/docs/feature_macros.md +++ b/docs/feature_macros.md @@ -106,6 +106,8 @@ Only basic keycodes (prefixed by `KC_`) are supported. Do not include the `KC_` ### `SEND_STRING()` & `process_record_user` +See also: [Send String](feature_send_string.md) + Sometimes you want a key to type out words or phrases. For the most common situations, we've provided `SEND_STRING()`, which will type out a string (i.e. a sequence of characters) for you. All ASCII characters that are easily translatable to a keycode are supported (e.g. `qmk 123\n\t`). Here is an example `keymap.c` for a two-key keyboard: @@ -347,7 +349,7 @@ If the keycode is `KC_CAPS`, it waits `TAP_HOLD_CAPS_DELAY` milliseconds instead Like `tap_code(<kc>)`, but with a `delay` parameter for specifying arbitrary intervals before sending the unregister event. -#### `register_code16(<kc>);`, `unregister_code16(<kc>);` and `tap_code16(<kc>);` +#### `register_code16(<kc>);`, `unregister_code16(<kc>);`, `tap_code16(<kc>);` and `tap_code16_delay(<kc>, <delay>);` These functions work similar to their regular counterparts, but allow you to use modded keycodes (with Shift, Alt, Control, and/or GUI applied to them). diff --git a/docs/feature_mouse_keys.md b/docs/feature_mouse_keys.md index 905da36e43..8e474c4245 100644 --- a/docs/feature_mouse_keys.md +++ b/docs/feature_mouse_keys.md @@ -87,9 +87,9 @@ This is an extension of the accelerated mode. The kinetic mode uses a quadratic |`MK_KINETIC_SPEED` |undefined|Enable kinetic mode | |`MOUSEKEY_DELAY` |5 |Delay between pressing a movement key and cursor movement | |`MOUSEKEY_INTERVAL` |10 |Time between cursor movements in milliseconds | -|`MOUSEKEY_MOVE_DELTA` |5 |Step size for accelerating from initial to base speed | +|`MOUSEKEY_MOVE_DELTA` |16 |Step size for accelerating from initial to base speed | |`MOUSEKEY_INITIAL_SPEED` |100 |Initial speed of the cursor in pixel per second | -|`MOUSEKEY_BASE_SPEED` |1000 |Maximum cursor speed at which acceleration stops | +|`MOUSEKEY_BASE_SPEED` |5000 |Maximum cursor speed at which acceleration stops | |`MOUSEKEY_DECELERATED_SPEED` |400 |Decelerated cursor speed | |`MOUSEKEY_ACCELERATED_SPEED` |3000 |Accelerated cursor speed | |`MOUSEKEY_WHEEL_INITIAL_MOVEMENTS` |16 |Initial number of movements of the mouse wheel | @@ -100,7 +100,7 @@ This is an extension of the accelerated mode. The kinetic mode uses a quadratic Tips: * The smoothness of the cursor movement depends on the `MOUSEKEY_INTERVAL` setting. The shorter the interval is set the smoother the movement will be. Setting the value too low makes the cursor unresponsive. Lower settings are possible if the micro processor is fast enough. For example: At an interval of `8` milliseconds, `125` movements per second will be initiated. With a base speed of `1000` each movement will move the cursor by `8` pixels. -* Mouse wheel movements are implemented differently from cursor movements. While it's okay for the cursor to move multiple pixels at once for the mouse wheel this would lead to jerky movements. Instead, the mouse wheel operates at step size `1`. Setting mouse wheel speed is done by adjusting the number of wheel movements per second. +* Mouse wheel movements are implemented differently from cursor movements. While it's okay for the cursor to move multiple pixels at once for the mouse wheel this would lead to jerky movements. Instead, the mouse wheel operates at step size `2`. Setting mouse wheel speed is done by adjusting the number of wheel movements per second. ### Constant mode diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index 02c1e64a31..f8a55c1c86 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -10,7 +10,7 @@ POINTING_DEVICE_ENABLE = yes ## Sensor Drivers -There are a number of sensors that are supported by default. Note that only one sensor can be enabled by `POINTING_DEVICE_DRIVER` at a time. If you need to enable more than one sensor, then you need to implement it manually. +There are a number of sensors that are supported by default. Note that only one sensor can be enabled by `POINTING_DEVICE_DRIVER` at a time. If you need to enable more than one sensor, then you need to implement it manually, using the `custom` driver. ### ADNS 5050 Sensor @@ -22,11 +22,11 @@ POINTING_DEVICE_DRIVER = adns5050 The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source. -| Setting | Description | -|--------------------|---------------------------------------------------------------------| -|`ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | -|`ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | -|`ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | +| Setting | Description | +| ------------------- | ------------------------------------------------------------------- | +| `ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | +| `ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | +| `ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI. @@ -40,13 +40,13 @@ POINTING_DEVICE_DRIVER = adns9800 The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking. -| Setting | Description | Default | -|--------------------------------|------------------------------------------------------------------------|---------------| -|`ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | -|`ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | -|`ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | -|`ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -|`ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | +| Setting | Description | Default | +| ----------------------- | ---------------------------------------------------------------------- | ------------- | +| `ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | +| `ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | +| `ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | +| `ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | +| `ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI. @@ -61,17 +61,16 @@ POINTING_DEVICE_DRIVER = analog_joystick The Analog Joystick is an analog (ADC) driven sensor. There are a variety of joysticks that you can use for this. -| Setting | Description | Default | -|----------------------------------|----------------------------------------------------------------------------|---------------| -|`ANALOG_JOYSTICK_X_AXIS_PIN` | (Required) The pin used for the vertical/X axis. | _not defined_ | -|`ANALOG_JOYSTICK_Y_AXIS_PIN` | (Required) The pin used for the horizontal/Y axis. | _not defined_ | -|`ANALOG_JOYSTICK_AXIS_MIN` | (Optional) Sets the lower range to be considered movement. | `0` | -|`ANALOG_JOYSTICK_AXIS_MAX` | (Optional) Sets the upper range to be considered movement. | `1023` | -|`ANALOG_JOYSTICK_SPEED_REGULATOR` | (Optional) The divisor used to slow down movement. (lower makes it faster) | `20` | -|`ANALOG_JOYSTICK_READ_INTERVAL` | (Optional) The interval in milliseconds between reads. | `10` | -|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maximum value used for motion. | `2` | -|`ANALOG_JOYSTICK_CLICK_PIN` | (Optional) The pin wired up to the press switch of the analog stick. | _not defined_ | - +| Setting | Description | Default | +| --------------------------------- | -------------------------------------------------------------------------- | ------------- | +| `ANALOG_JOYSTICK_X_AXIS_PIN` | (Required) The pin used for the vertical/X axis. | _not defined_ | +| `ANALOG_JOYSTICK_Y_AXIS_PIN` | (Required) The pin used for the horizontal/Y axis. | _not defined_ | +| `ANALOG_JOYSTICK_AXIS_MIN` | (Optional) Sets the lower range to be considered movement. | `0` | +| `ANALOG_JOYSTICK_AXIS_MAX` | (Optional) Sets the upper range to be considered movement. | `1023` | +| `ANALOG_JOYSTICK_SPEED_REGULATOR` | (Optional) The divisor used to slow down movement. (lower makes it faster) | `20` | +| `ANALOG_JOYSTICK_READ_INTERVAL` | (Optional) The interval in milliseconds between reads. | `10` | +| `ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maximum value used for motion. | `2` | +| `ANALOG_JOYSTICK_CLICK_PIN` | (Optional) The pin wired up to the press switch of the analog stick. | _not defined_ | ### Cirque Trackpad @@ -90,29 +89,69 @@ POINTING_DEVICE_DRIVER = cirque_pinnacle_spi This supports the Cirque Pinnacle 1CA027 Touch Controller, which is used in the TM040040, TM035035 and the TM023023 trackpads. These are I2C or SPI compatible, and both configurations are supported. -| Setting | Description | Default | -|---------------------------------|---------------------------------------------------------------------------------|-----------------------| -|`CIRQUE_PINNACLE_X_LOWER` | (Optional) The minimum reachable X value on the sensor. | `127` | -|`CIRQUE_PINNACLE_X_UPPER` | (Optional) The maximum reachable X value on the sensor. | `1919` | -|`CIRQUE_PINNACLE_Y_LOWER` | (Optional) The minimum reachable Y value on the sensor. | `63` | -|`CIRQUE_PINNACLE_Y_UPPER` | (Optional) The maximum reachable Y value on the sensor. | `1471` | -|`CIRQUE_PINNACLE_TAPPING_TERM` | (Optional) Length of time that a touch can be to be considered a tap. | `TAPPING_TERM`/`200` | -|`CIRQUE_PINNACLE_TOUCH_DEBOUNCE` | (Optional) Length of time that a touch can be to be considered a tap. | `TAPPING_TERM`/`200` | - -| I2C Setting | Description | Default | -|--------------------------|---------------------------------------------------------------------------------|---------| -|`CIRQUE_PINNACLE_ADDR` | (Required) Sets the I2C Address for the Cirque Trackpad | `0x2A` | -|`CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20` | - -| SPI Setting | Description | Default | -|-------------------------------|------------------------------------------------------------------------|---------------| -|`CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` | -|`CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | -|`CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` | -|`CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -|`CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | - -Default Scaling/CPI is 1024. +| Setting | Description | Default | +| -------------------------------- | ---------------------------------------------------------- | ------------------ | +| `CIRQUE_PINNACLE_X_LOWER` | (Optional) The minimum reachable X value on the sensor. | `127` | +| `CIRQUE_PINNACLE_X_UPPER` | (Optional) The maximum reachable X value on the sensor. | `1919` | +| `CIRQUE_PINNACLE_Y_LOWER` | (Optional) The minimum reachable Y value on the sensor. | `63` | +| `CIRQUE_PINNACLE_Y_UPPER` | (Optional) The maximum reachable Y value on the sensor. | `1471` | +| `CIRQUE_PINNACLE_DIAMETER_MM` | (Optional) Diameter of the trackpad sensor in millimeters. | `40` | +| `CIRQUE_PINNACLE_ATTENUATION` | (Optional) Sets the attenuation of the sensor data. | `ADC_ATTENUATE_4X` | +| `CIRQUE_PINNACLE_CURVED_OVERLAY` | (Optional) Applies settings tuned for curved overlay. | _not defined_ | + +**`CIRQUE_PINNACLE_ATTENUATION`** is a measure of how much data is suppressed in regards to sensitivity. The higher the attenuation, the less sensitive the touchpad will be. + +Default attenuation is set to 4X, although if you are using a thicker overlay (such as the curved overlay) you will want a lower attenuation such as 2X. The possible values are: +* `ADC_ATTENUATE_4X`: Least sensitive +* `ADC_ATTENUATE_3X` +* `ADC_ATTENUATE_2X` +* `ADC_ATTENUATE_1X`: Most sensitive + +| I2C Setting | Description | Default | +| ------------------------- | ------------------------------------------------------------------------------- | ------- | +| `CIRQUE_PINNACLE_ADDR` | (Required) Sets the I2C Address for the Cirque Trackpad | `0x2A` | +| `CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20` | + +| SPI Setting | Description | Default | +| ------------------------------ | ---------------------------------------------------------------------- | ------------- | +| `CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` | +| `CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | +| `CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` | +| `CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | +| `CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | + +Default Scaling is 1024. Actual CPI depends on trackpad diameter. + +Also see the `POINTING_DEVICE_TASK_THROTTLE_MS`, which defaults to 10ms when using Cirque Pinnacle, which matches the internal update rate of the position registers (in standard configuration). Advanced configuration for pen/stylus usage might require lower values. + +#### Cirque Trackpad gestures + +| Gesture Setting | Description | Default | +| ---------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ | -------------------- | +| `CIRQUE_PINNACLE_CIRCULAR_SCROLL_ENABLE` | (Optional) Enable circular scroll. Touch originating in outer ring can trigger scroll by moving along the perimeter. Near side triggers vertical scroll and far side triggers horizontal scroll. | _not defined_ | +| `CIRQUE_PINNACLE_TAP_ENABLE` | (Optional) Enable tap to click. This currently only works on the master side. | _not defined_ | +| `CIRQUE_PINNACLE_TAPPING_TERM` | (Optional) Length of time that a touch can be to be considered a tap. | `TAPPING_TERM`/`200` | +| `CIRQUE_PINNACLE_TOUCH_DEBOUNCE` | (Optional) Length of time that a touch can be to be considered a tap. | `TAPPING_TERM`/`200` | + +Additionally, `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE` is supported on the Cirque. + +### PAW 3204 Sensor + +To use the paw 3204 sensor, add this to your `rules.mk` + +```make +POINTING_DEVICE_DRIVER = paw3204 +``` + +The paw 3204 sensor uses a serial type protocol for communication, and requires an additional light source. + +| Setting | Description | +|--------------------|---------------------------------------------------------------------| +|`PAW3204_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | +|`PAW3204_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | + +The CPI range is 400-1600, with supported values of (400, 500, 600, 800, 1000, 1200 and 1600). Defaults to 1000 CPI. + ### Pimoroni Trackball @@ -124,62 +163,69 @@ POINTING_DEVICE_DRIVER = pimoroni_trackball The Pimoroni Trackball module is a I2C based breakout board with an RGB enable trackball. -| Setting | Description | Default | -|-------------------------------------|------------------------------------------------------------------------------------|---------| -|`PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` | -|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackball in milliseconds. | `100` | -|`PIMORONI_TRACKBALL_SCALE` | (Optional) The multiplier used to generate reports from the sensor. | `5` | -|`PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` | -|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | +| Setting | Description | Default | +| ------------------------------------ | ---------------------------------------------------------------------------------- | ------- | +| `PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` | +| `PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackball in milliseconds. | `100` | +| `PIMORONI_TRACKBALL_SCALE` | (Optional) The multiplier used to generate reports from the sensor. | `5` | +| `PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` | +| `PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | -### PMW 3360 Sensor +### PMW 3360 and PMW 3389 Sensor -This drivers supports multiple sensors _per_ controller, so 2 can be attached at the same side for split keyboards (or unsplit keyboards). -To use the PMW 3360 sensor, add this to your `rules.mk` +This drivers supports both the PMW 3360 and PMW 3389 sensor as well as multiple sensors of the same type _per_ controller, so 2 can be attached at the same side for split keyboards (or unsplit keyboards). + +To use the **PMW 3360** sensor, add this to your `rules.mk` ```make POINTING_DEVICE_DRIVER = pmw3360 ``` -The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for surface tracking. +The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI. -| Setting | Description | Default | -|-----------------------------|--------------------------------------------------------------------------------------------|---------------| -|`PMW3360_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | -|`PMW3360_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ | -|`PMW3360_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | -|`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | -|`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | -|`PMW3360_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -|`PMW3360_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` | -|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor.| `0` | -|`PMW3360_FIRMWARE_UPLOAD_FAST` | (Optional) Skips the 15us wait between firmware blocks. | _not defined_ | +To use the **PMW 3389** sensor, add this to your `rules.mk` -The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI. +```make +POINTING_DEVICE_DRIVER = pmw3389 +``` -To use multiple sensors, instead of setting `PMW3360_CS_PIN` you need to set `PMW3360_CS_PINS` and also handle and merge the read from this sensor in user code. +The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI. + +Both PMW 3360 and PMW 3389 are SPI driven optical sensors, that use a built in IR LED for surface tracking. + +| Setting | Description | Default | +| ---------------------------- | ------------------------------------------------------------------------------------------- | ------------- | +| `PMW33XX_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | +| `PMW33XX_CS_PINS` | (Alternative) Sets the Cable Select pins connected to multiple sensors. | _not defined_ | +| `PMW33XX_CPI` | (Optional) Sets counts per inch sensitivity of the sensor. | _varies_ | +| `PMW33XX_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | +| `PMW33XX_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | +| `PMW33XX_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` | +| `ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor. | `0` | + +To use multiple sensors, instead of setting `PMW33XX_CS_PIN` you need to set `PMW33XX_CS_PINS` and also handle and merge the read from this sensor in user code. Note that different (per sensor) values of CPI, speed liftoff, rotational angle or flipping of X/Y is not currently supported. ```c // in config.h: -#define PMW3360_CS_PINS { B5, B6 } - +#define PMW33XX_CS_PINS { B5, B6 } // in keyboard.c: #ifdef POINTING_DEVICE_ENABLE void pointing_device_init_kb(void) { - pmw3360_init(1); // index 1 is the second device. - pointing_device_set_cpi(800); // applies to both sensors + pmw33xx_init(1); // index 1 is the second device. + pmw33xx_set_cpi(0, 800); // applies to first sensor + pmw33xx_set_cpi(1, 800); // applies to second sensor pointing_device_init_user(); } // Contains report from sensor #0 already, need to merge in from sensor #1 report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { - report_pmw3360_t data = pmw3360_read_burst(1); - if (data.isOnSurface && data.isMotion) { + pmw33xx_report_t report = pmw33xx_read_burst(1); + if (!report.motion.b.is_lifted && report.motion.b.is_motion) { // From quantum/pointing_device_drivers.c #define constrain_hid(amt) ((amt) < -127 ? -127 : ((amt) > 127 ? 127 : (amt))) - mouse_report.x = constrain_hid(mouse_report.x + data.dx); - mouse_report.y = constrain_hid(mouse_report.y + data.dy); + mouse_report.x = constrain_hid(mouse_report.x + report.delta_x); + mouse_report.y = constrain_hid(mouse_report.y + report.delta_y); } return pointing_device_task_user(mouse_report); } @@ -187,30 +233,6 @@ report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { ``` -### PMW 3389 Sensor - -To use the PMW 3389 sensor, add this to your `rules.mk` - -```make -POINTING_DEVICE_DRIVER = pmw3389 -``` - -The PMW 3389 is an SPI driven optical sensor, that uses a built in IR LED for surface tracking. - -| Setting | Description | Default | -|---------------------------------|--------------------------------------------------------------------------------------------|---------------| -|`PMW3389_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | -|`PMW3389_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | -|`PMW3389_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | -|`PMW3389_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | -|`PMW3389_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -|`PMW3389_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` | -|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0` | -|`PMW3389_FIRMWARE_UPLOAD_FAST` | (Optional) Skips the 15us wait between firmware blocks. | _not defined_ | - -The CPI range is 50-16000, in increments of 50. Defaults to 2000 CPI. - - ### Custom Driver If you have a sensor type that isn't supported above, a custom option is available by adding the following to your `rules.mk` @@ -232,41 +254,45 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} ## Common Configuration -| Setting | Description | Default | -|----------------------------------|-----------------------------------------------------------------------|-------------------| -|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | -|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | -|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | -|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | -|`POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ | +| Setting | Description | Default | +| ---------------------------------- | -------------------------------------------------------------------------------------------------------------------------------- | ------------- | +| `MOUSE_EXTENDED_REPORT` | (Optional) Enables support for extended mouse reports. (-32767 to 32767, instead of just -127 to 127). | _not defined_ | +| `POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +| `POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +| `POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +| `POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | +| `POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | +| `POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | +| `POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ | +| `POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE` | (Optional) Enable inertial cursor. Cursor continues moving after a flick gesture and slows down by kinetic friction. | _not defined_ | !> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and `POINTING_DEVICE_TASK_THROTTLE_MS` will default to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness. +!> **`POINTING_DEVICE_GESTURES_CURSOR_GLIDE_ENABLE`** can be used with any pointing device with a lift/contact status can integrate this gesture into its driver. e.g. PMW3360 can use Lift_Stat from Motion register. Note that `POINTING_DEVICE_MOTION_PIN` cannot be used with this feature; continuous polling of `pointing_device_get_report()` is needed to generate glide reports. + ## Split Keyboard Configuration The following configuration options are only available when using `SPLIT_POINTING_ENABLE` see [data sync options](feature_split_keyboard.md?id=data-sync-options). The rotation and invert `*_RIGHT` options are only used with `POINTING_DEVICE_COMBINED`. If using `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` use the common configuration above to configure your pointing device. -| Setting | Description | Default | -|----------------------------------------|-----------------------------------------------------------------------|---------------| -|`POINTING_DEVICE_LEFT` | Pointing device on the left side (Required - pick one only) | _not defined_ | -|`POINTING_DEVICE_RIGHT` | Pointing device on the right side (Required - pick one only) | _not defined_ | -|`POINTING_DEVICE_COMBINED` | Pointing device on both sides (Required - pick one only) | _not defined_ | -|`POINTING_DEVICE_ROTATION_90_RIGHT` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_180_RIGHT` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_270_RIGHT` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | -|`POINTING_DEVICE_INVERT_X_RIGHT` | (Optional) Inverts the X axis report. | _not defined_ | -|`POINTING_DEVICE_INVERT_Y_RIGHT` | (Optional) Inverts the Y axis report. | _not defined_ | +| Setting | Description | Default | +| ------------------------------------ | ----------------------------------------------------------------------------------------------------- | ------------- | +| `POINTING_DEVICE_LEFT` | Pointing device on the left side (Required - pick one only) | _not defined_ | +| `POINTING_DEVICE_RIGHT` | Pointing device on the right side (Required - pick one only) | _not defined_ | +| `POINTING_DEVICE_COMBINED` | Pointing device on both sides (Required - pick one only) | _not defined_ | +| `POINTING_DEVICE_ROTATION_90_RIGHT` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +| `POINTING_DEVICE_ROTATION_180_RIGHT` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +| `POINTING_DEVICE_ROTATION_270_RIGHT` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +| `POINTING_DEVICE_INVERT_X_RIGHT` | (Optional) Inverts the X axis report. | _not defined_ | +| `POINTING_DEVICE_INVERT_Y_RIGHT` | (Optional) Inverts the Y axis report. | _not defined_ | !> If there is a `_RIGHT` configuration option or callback, the [common configuration](feature_pointing_device.md?id=common-configuration) option will work for the left. For correct left/right detection you should setup a [handedness option](feature_split_keyboard?id=setting-handedness), `EE_HANDS` is usually a good option for an existing board that doesn't do handedness by hardware. ## Callbacks and Functions -| Function | Description | -|-----------------------------------|----------------------------------------------------------------------------------------------------------------------------------------| +| Function | Description | +| ---------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------- | | `pointing_device_init_kb(void)` | Callback to allow for keyboard level initialization. Useful for additional hardware sensors. | | `pointing_device_init_user(void)` | Callback to allow for user level initialization. Useful for additional hardware sensors. | | `pointing_device_task_kb(mouse_report)` | Callback that sends sensor data, so keyboard code can intercept and modify the data. Returns a mouse report. | @@ -274,11 +300,11 @@ The following configuration options are only available when using `SPLIT_POINTIN | `pointing_device_handle_buttons(buttons, pressed, button)` | Callback to handle hardware button presses. Returns a `uint8_t`. | | `pointing_device_get_cpi(void)` | Gets the current CPI/DPI setting from the sensor, if supported. | | `pointing_device_set_cpi(uint16_t)` | Sets the CPI/DPI, if supported. | -| `pointing_device_get_report(void)` | Returns the current mouse report (as a `mouse_report_t` data structure). | -| `pointing_device_set_report(mouse_report)` | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function. | -| `pointing_device_send(void)` | Sends the current mouse report to the host system. Function can be replaced. | +| `pointing_device_get_report(void)` | Returns the current mouse report (as a `mouse_report_t` data structure). | +| `pointing_device_set_report(mouse_report)` | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function. | +| `pointing_device_send(void)` | Sends the current mouse report to the host system. Function can be replaced. | | `has_mouse_report_changed(new_report, old_report)` | Compares the old and new `mouse_report_t` data and returns true only if it has changed. | -| `pointing_device_adjust_by_defines(mouse_report)` | Applies rotations and invert configurations to a raw mouse report. | +| `pointing_device_adjust_by_defines(mouse_report)` | Applies rotations and invert configurations to a raw mouse report. | ## Split Keyboard Callbacks and Functions @@ -286,7 +312,7 @@ The following configuration options are only available when using `SPLIT_POINTIN The combined functions below are only available when using `SPLIT_POINTING_ENABLE` and `POINTING_DEVICE_COMBINED`. The 2 callbacks `pointing_device_task_combined_*` replace the single sided equivalents above. See the [combined pointing devices example](feature_pointing_device.md?id=combined-pointing-devices) | Function | Description | -|-----------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------| +| --------------------------------------------------------------- | ------------------------------------------------------------------------------------------------------------------------ | | `pointing_device_set_shared_report(mouse_report)` | Sets the shared mouse report to the assigned `mouse_report_t` data structured passed to the function. | | `pointing_device_set_cpi_on_side(bool, uint16_t)` | Sets the CPI/DPI of one side, if supported. Passing `true` will set the left and `false` the right` | | `pointing_device_combine_reports(left_report, right_report)` | Returns a combined mouse_report of left_report and right_report (as a `mouse_report_t` data structure) | @@ -430,4 +456,3 @@ report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, re return pointing_device_combine_reports(left_report, right_report); } ``` -======= diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index b664ccd698..f9ab395488 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -86,6 +86,7 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | | `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 | +| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | | `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | | `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | @@ -172,6 +173,7 @@ Configure the hardware via your `config.h`: | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | | `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3737B only | 0 | +| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF | | `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | | `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | @@ -409,6 +411,7 @@ You can use up to 2 AW20216 IC's. Do not specify `DRIVER_<N>_xxx` defines for IC | `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | | | `AW_SCALING_MAX` | (Optional) LED current scaling value (0-255, higher values mean LED is brighter at full PWM) | 150 | | `AW_GLOBAL_CURRENT_MAX` | (Optional) Driver global current limit (0-255, higher values means the driver may consume more power) | 150 | +| `AW_SPI_MODE` | (Optional) Mode for SPI communication (0-3, defines polarity and phase of the clock) | 3 | | `AW_SPI_DIVISOR` | (Optional) Clock divisor for SPI communication (powers of 2, smaller numbers means faster communication, should not be less than 4) | 4 | Here is an example using 2 drivers. @@ -665,11 +668,36 @@ In order to change the delay of temperature decrease define `RGB_MATRIX_TYPING_H #define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 50 ``` -Heatmap effect may not light up the correct adjacent LEDs for certain key matrix layout such as split keyboards. The following define will limit the effect to pressed keys only: +As heatmap uses the physical position of the leds set in the g_led_config, you may need to tweak the following options to get the best effect for your keyboard. Note the size of this grid is `224x64`. + +Limit the distance the effect spreads to surrounding keys. + +```c +#define RGB_MATRIX_TYPING_HEATMAP_SPREAD 40 +``` + +Limit how hot surrounding keys get from each press. + +```c +#define RGB_MATRIX_TYPING_HEATMAP_AREA_LIMIT 16 +``` + +Remove the spread effect entirely. + ```c #define RGB_MATRIX_TYPING_HEATMAP_SLIM ``` +### RGB Matrix Effect Solid Reactive :id=rgb-matrix-effect-solid-reactive + +Solid reactive effects will pulse RGB light on key presses with user configurable hues. To enable gradient mode that will automatically change reactive color, add the following define: + +```c +#define RGB_MATRIX_SOLID_REACTIVE_GRADIENT_MODE +``` + +Gradient mode will loop through the color wheel hues over time and its duration can be controlled with the effect speed keycodes (`RGB_SPI`/`RGB_SPD`). + ## Custom RGB Matrix Effects :id=custom-rgb-matrix-effects By setting `RGB_MATRIX_CUSTOM_USER = yes` in `rules.mk`, new effects can be defined directly from your keymap or userspace, without having to edit any QMK core files. To declare new effects, create a `rgb_matrix_user.inc` file in the user keymap directory or userspace folder. diff --git a/docs/feature_send_string.md b/docs/feature_send_string.md new file mode 100644 index 0000000000..67df0224e9 --- /dev/null +++ b/docs/feature_send_string.md @@ -0,0 +1,224 @@ +# Send String + +The Send String API is part of QMK's macro system. It allows for sequences of keystrokes to be sent automatically. + +The full ASCII character set is supported, along with all of the keycodes in the Basic Keycode range (as these are the only ones that will actually be sent to the host). + +?> Unicode characters are **not** supported with this API -- see the [Unicode](feature_unicode.md) feature instead. + +## Usage + +Send String is enabled by default, so there is usually no need for any special setup. However, if it is disabled, add the following to your `rules.mk`: + +```make +SEND_STRING_ENABLE = yes +``` + +## Basic Configuration + +Add the following to your `config.h`: + +|Define |Default |Description | +|-----------------|----------------|------------------------------------------------------------------------------------------------------------| +|`SENDSTRING_BELL`|*Not defined* |If the [Audio](feature_audio.md) feature is enabled, the `\a` character (ASCII `BEL`) will beep the speaker.| +|`BELL_SOUND` |`TERMINAL_SOUND`|The song to play when the `\a` character is encountered. By default, this is an eighth note of C5. | + +## Keycodes + +The Send String functions accept C string literals, but specific keycodes can be injected with the below macros. All of the keycodes in the [Basic Keycode range](keycodes_basic.md) are supported (as these are the only ones that will actually be sent to the host), but with an `X_` prefix instead of `KC_`. + +|Macro |Description | +|--------------|-------------------------------------------------------------------| +|`SS_TAP(x)` |Send a keydown, then keyup, event for the given Send String keycode| +|`SS_DOWN(x)` |Send a keydown event for the given Send String keycode | +|`SS_UP(x)` |Send a keyup event for the given Send String keycode | +|`SS_DELAY(ms)`|Wait for `ms` milliseconds | + +The following characters are also mapped to their respective keycodes for convenience: + +|Character|Hex |ASCII|Keycode | +|---------|------|-----|--------------| +|`\b` |`\x08`|`BS` |`KC_BACKSPACE`| +|`\e` |`\x09`|`ESC`|`KC_ESCAPE` | +|`\n` |`\x0A`|`LF` |`KC_ENTER` | +|`\t` |`\x1B`|`TAB`|`KC_TAB` | +| |`\x7F`|`DEL`|`KC_DELETE` | + +### Language Support + +By default, Send String assumes your OS keyboard layout is set to US ANSI. If you are using a different keyboard layout, you can [override the lookup tables used to convert ASCII characters to keystrokes](reference_keymap_extras.md#sendstring-support). + +## Examples + +### Hello World + +A simple custom keycode which types out "Hello, world!" and the Enter key when pressed. + +Add the following to your `keymap.c`: + +```c +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case SS_HELLO: + if (record->event.pressed) { + SEND_STRING("Hello, world!\n"); + } + return false; + } + + return true; +} +``` + +### Keycode Injection + +This example types out opening and closing curly braces, then taps the left arrow key to move the cursor between the two. + +```c +SEND_STRING("{}" SS_TAP(X_LEFT)); +``` + +This example types Ctrl+A, then Ctrl+C, without releasing Ctrl. + +```c +SEND_STRING(SS_LCTL("ac")); +``` + +## API + +### `void send_string(const char *string)` + +Type out a string of ASCII characters. + +This function simply calls `send_string_with_delay(string, 0)`. + +#### Arguments + + - `const char *string` + The string to type out. + +--- + +### `void send_string_with_delay(const char *string, uint8_t interval)` + +Type out a string of ASCII characters, with a delay between each character. + +#### Arguments + + - `const char *string` + The string to type out. + - `uint8_t interval` + The amount of time, in milliseconds, to wait before typing the next character. + +--- + +### `void send_string_P(const char *string)` + +Type out a PROGMEM string of ASCII characters. + +On ARM devices, this function is simply an alias for `send_string_with_delay(string, 0)`. + +#### Arguments + + - `const char *string` + The string to type out. + +--- + +### `void send_string_with_delay_P(const char *string, uint8_t interval)` + +Type out a PROGMEM string of ASCII characters, with a delay between each character. + +On ARM devices, this function is simply an alias for `send_string_with_delay(string, interval)`. + +#### Arguments + + - `const char *string` + The string to type out. + - `uint8_t interval` + The amount of time, in milliseconds, to wait before typing the next character. + +--- + +### `void send_char(char ascii_code)` + +Type out an ASCII character. + +#### Arguments + + - `char ascii_code` + The character to type. + +--- + +### `void send_dword(uint32_t number)` + +Type out an eight digit (unsigned 32-bit) hexadecimal value. + +The format is `[0-9a-f]{8}`, eg. `00000000` through `ffffffff`. + +#### Arguments + + - `uint32_t number` + The value to type, from 0 to 4,294,967,295. + +--- + +### `void send_word(uint16_t number)` + +Type out a four digit (unsigned 16-bit) hexadecimal value. + +The format is `[0-9a-f]{4}`, eg. `0000` through `ffff`. + +#### Arguments + + - `uint16_t number` + The value to type, from 0 to 65,535. + +--- + +### `void send_byte(uint8_t number)` + +Type out a two digit (8-bit) hexadecimal value. + +The format is `[0-9a-f]{2}`, eg. `00` through `ff`. + +#### Arguments + + - `uint8_t number` + The value to type, from 0 to 255. + +--- + +### `void send_nibble(uint8_t number)` + +Type out a single hexadecimal digit. + +The format is `[0-9a-f]{1}`, eg. `0` through `f`. + +#### Arguments + + - `uint8_t number` + The value to type, from 0 to 15. + +--- + +### `void tap_random_base64(void)` + +Type a pseudorandom character from the set `A-Z`, `a-z`, `0-9`, `+` and `/`. + +--- + +### `SEND_STRING(string)` + +Shortcut macro for `send_string_with_delay_P(PSTR(string), 0)`. + +On ARM devices, this define evaluates to `send_string_with_delay(string, 0)`. + +--- + +### `SEND_STRING_DELAY(string, interval)` + +Shortcut macro for `send_string_with_delay_P(PSTR(string), interval)`. + +On ARM devices, this define evaluates to `send_string_with_delay(string, interval)`. diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index eefafdbf75..e53b3525cb 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -143,6 +143,9 @@ Next, you will have to flash the EEPROM files once for the correct hand to the c * ARM controllers with a DFU compatible bootloader (e.g. Proton-C): * `:dfu-util-split-left` * `:dfu-util-split-right` +* ARM controllers with a UF2 compatible bootloader: + * `:uf2-split-left` + * `:uf2-split-right` Example: @@ -367,7 +370,7 @@ There are some settings that you may need to configure, based on how the hardwar #define MATRIX_COL_PINS_RIGHT { <col pins> } ``` -This allows you to specify a different set of pins for the matrix on the right side. This is useful if you have a board with differently-shaped halves that requires a different configuration (such as Keebio's Quefrency). +This allows you to specify a different set of pins for the matrix on the right side. This is useful if you have a board with differently-shaped halves that requires a different configuration (such as Keebio's Quefrency). The number of pins in the right and left matrices must be the same, if you have a board with a different number of rows or columns on one side, pad out the extra spaces with `NO_PIN` and make sure you add the unused rows or columns to your matrix. ```c #define DIRECT_PINS_RIGHT { { F1, F0, B0, C7 }, { F4, F5, F6, F7 } } diff --git a/docs/feature_stenography.md b/docs/feature_stenography.md index 2b52bb17a6..62d4dabf81 100644 --- a/docs/feature_stenography.md +++ b/docs/feature_stenography.md @@ -8,46 +8,107 @@ The [Open Steno Project](https://www.openstenoproject.org/) has built an open-so Plover can work with any standard QWERTY keyboard, although it is more efficient if the keyboard supports NKRO (n-key rollover) to allow Plover to see all the pressed keys at once. An example keymap for Plover can be found in `planck/keymaps/default`. Switching to the `PLOVER` layer adjusts the position of the keyboard to support the number bar. -To use Plover with QMK just enable NKRO and optionally adjust your layout if you have anything other than a standard layout. You may also want to purchase some steno-friendly keycaps to make it easier to hit multiple keys. +To enable NKRO, add `NKRO_ENABLE = yes` in your `rules.mk` and make sure to press `NK_ON` to turn it on because `NKRO_ENABLE = yes` merely adds the possibility of switching to NKRO mode but it doesn't automatically switch to it. If you want to automatically switch, add `#define FORCE_NKRO` in your `config.h`. + +You may also need to adjust your layout, either in QMK or in Plover, if you have anything other than a standard layout. You may also want to purchase some steno-friendly keycaps to make it easier to hit multiple keys. ## Plover with Steno Protocol :id=plover-with-steno-protocol -Plover also understands the language of several steno machines. QMK can speak a couple of these languages, TX Bolt and GeminiPR. An example layout can be found in `planck/keymaps/steno`. +Plover also understands the language of several steno machines. QMK can speak a couple of these languages: TX Bolt and GeminiPR. An example layout can be found in `planck/keymaps/steno`. + +When QMK speaks to Plover over a steno protocol, Plover will not use the keyboard as input. This means that you can switch back and forth between a standard keyboard and your steno keyboard, or even switch layers from Plover to standard and back without needing to activate/deactivate Plover. + +In this mode, Plover expects to speak with a steno machine over a serial port so QMK will present itself to the operating system as a virtual serial port in addition to a keyboard. -When QMK speaks to Plover over a steno protocol Plover will not use the keyboard as input. This means that you can switch back and forth between a standard keyboard and your steno keyboard, or even switch layers from Plover to standard and back without needing to activate/deactivate Plover. +> Note: Due to hardware limitations, you might not be able to run both a virtual serial port and mouse emulation at the same time. -In this mode Plover expects to speak with a steno machine over a serial port so QMK will present itself to the operating system as a virtual serial port in addition to a keyboard. By default QMK will speak the TX Bolt protocol but can be switched to GeminiPR; the last protocol used is stored in non-volatile memory so QMK will use the same protocol on restart. +!> Serial stenography protocols are not supported on [V-USB keyboards](compatible_microcontrollers#atmel-avr). -> Note: Due to hardware limitations you may not be able to run both a virtual serial port and mouse emulation at the same time. +To enable stenography protocols, add the following lines to your `rules.mk`: +```mk +STENO_ENABLE = yes +``` ### TX Bolt :id=tx-bolt -TX Bolt communicates the status of 24 keys over a very simple protocol in variable-sized (1-5 byte) packets. +TX Bolt communicates the status of 24 keys over a simple protocol in variable-sized (1–4 bytes) packets. -### GeminiPR :id=geminipr +To select TX Bolt, add the following lines to your `rules.mk`: +```mk +STENO_ENABLE = yes +STENO_PROTOCOL = txbolt +``` -GeminiPR encodes 42 keys into a 6-byte packet. While TX Bolt contains everything that is necessary for standard stenography, GeminiPR opens up many more options, including supporting non-English theories. +Each byte of the packet represents a different group of steno keys. Determining the group of a certain byte of the packet is done by checking the first two bits, the remaining bits are set if the corresponding steno key was pressed for the stroke. The last set of keys (as indicated by leading `11`) needs to keep track of less keys than there are bits so one of the bits is constantly 0. -## Configuring QMK for Steno :id=configuring-qmk-for-steno +The start of a new packet can be detected by comparing the group “ID” (the two MSBs) of the current byte to that of the previously received byte. If the group “ID” of the current byte is smaller or equal to that of the previous byte, it means that the current byte is the beginning of a new packet. -Firstly, enable steno in your keymap's Makefile. You may also need disable mousekeys, extra keys, or another USB endpoint to prevent conflicts. The builtin USB stack for some processors only supports a certain number of USB endpoints and the virtual serial port needed for steno fills 3 of them. +The format of TX Bolt packets is shown below. +``` +00HWPKTS 01UE*OAR 10GLBPRF 110#ZDST +``` + +Examples of steno strokes and the associated packet: +- `EUBG` = `01110000 10101000` +- `WAZ` = `00010000 01000010 11001000` +- `PHAPBGS` = `00101000 01000010 10101100 11000010` + +### GeminiPR :id=geminipr + +GeminiPR encodes 42 keys into a 6-byte packet. While TX Bolt contains everything that is necessary for standard stenography, GeminiPR opens up many more options, including differentiating between top and bottom `S-`, and supporting non-English theories. -```make +To select GeminiPR, add the following lines to your `rules.mk`: +```mk STENO_ENABLE = yes -MOUSEKEY_ENABLE = no +STENO_PROTOCOL = geminipr ``` -In your keymap create a new layer for Plover. You will need to include `keymap_steno.h`. See `planck/keymaps/steno/keymap.c` for an example. Remember to create a key to switch to the layer as well as a key for exiting the layer. If you would like to switch modes on the fly you can use the keycodes `QK_STENO_BOLT` and `QK_STENO_GEMINI`. If you only want to use one of the protocols you may set it up in your initialization function: +All packets in the GeminiPR protocol consist of exactly six bytes, used as bit-arrays for different groups of keys. The beginning of a packet is indicated by setting the most significant bit (MSB) to 1 while setting the MSB of the remaining five bytes to 0. -```c -void eeconfig_init_user() { - steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT -} +The format of GeminiPR packets is shown below. +``` +1 Fn #1 #2 #3 #4 #5 #6 +0 S1- S2- T- K- P- W- H- +0 R- A- O- *1 *2 res1 res2 +0 pwr *3 *4 -E -U -F -R +0 -P -B -L -G -T -S -D +0 #7 #8 #9 #A #B #C -Z ``` -Once you have your keyboard flashed launch Plover. Click the 'Configure...' button. In the 'Machine' tab select the Stenotype Machine that corresponds to your desired protocol. Click the 'Configure...' button on this tab and enter the serial port or click 'Scan'. Baud rate is fine at 9600 (although you should be able to set as high as 115200 with no issues). Use the default settings for everything else (Data Bits: 8, Stop Bits: 1, Parity: N, no flow control). +Examples of steno strokes and the associated packet: +- `EUBG` = `10000000 00000000 00000000 00001100 00101000 00000000` +- `WAZ` = `10000000 00000010 00100000 00000000 00000000 00000001` +- `PHAPBGS` = `10000000 00000101 00100000 00000000 01101010 00000000` -On the display tab click 'Open stroke display'. With Plover disabled you should be able to hit keys on your keyboard and see them show up in the stroke display window. Use this to make sure you have set up your keymap correctly. You are now ready to steno! +### Switching protocols on the fly :id=switching-protocols-on-the-fly + +If you wish to switch the serial protocol used to transfer the steno chords without having to recompile your keyboard firmware every time, you can press the `QK_STENO_BOLT` and `QK_STENO_GEMINI` keycodes in order to switch protocols on the fly. + +To enable these special keycodes, add the following lines to your `rules.mk`: +```mk +STENO_ENABLE = yes +STENO_PROTOCOL = all +``` + +If you want to switch protocols programatically, as part of a custom macro for example, don't use `tap_code(QK_STENO_*)`, as `tap_code` only supports [basic keycodes](keycodes_basic). Instead, you should use `steno_set_mode(STENO_MODE_*)`, whose valid arguments are `STENO_MODE_BOLT` and `STENO_MODE_GEMINI`. + +The default protocol is Gemini PR but the last protocol used is stored in non-volatile memory so QMK will remember your choice between reboots of your keyboard — assuming that your keyboard features (emulated) EEPROM. + +Naturally, this option takes the most amount of firmware space as it needs to compile the code for all the available stenography protocols. In most cases, compiling a single stenography protocol is sufficient. + +The default value for `STENO_PROTOCOL` is `all`. + +## Configuring QMK for Steno :id=configuring-qmk-for-steno + +After enabling stenography and optionally selecting a protocol, you may also need disable mouse keys, extra keys, or another USB endpoint to prevent conflicts. The builtin USB stack for some processors only supports a certain number of USB endpoints and the virtual serial port needed for steno fills 3 of them. + +!> If you had *explicitly* set `VIRSTER_ENABLE = no`, none of the serial stenography protocols (GeminiPR, TX Bolt) will work properly. You are expected to either set it to `yes`, remove the line from your `rules.mk` or send the steno chords yourself in an alternative way using the [provided interceptable hooks](#interfacing-with-the-code). + +In your keymap, create a new layer for Plover, that you can fill in with the [steno keycodes](#keycode-reference) (you will need to include `keymap_steno.h`, see `planck/keymaps/steno/keymap.c` for an example). Remember to create a key to switch to the layer as well as a key for exiting the layer. + +Once you have your keyboard flashed, launch Plover. Click the 'Configure...' button. In the 'Machine' tab, select the Stenotype Machine that corresponds to your desired protocol. Click the 'Configure...' button on this tab and enter the serial port or click 'Scan'. Baud rate is fine at 9600 (although you should be able to set as high as 115200 with no issues). Use the default settings for everything else (Data Bits: 8, Stop Bits: 1, Parity: N, no flow control). + +To test your keymap, you can chord keys on your keyboard and either look at the output of the 'paper tape' (Tools > Paper Tape) or that of the 'layout display' (Tools > Layout Display). If your strokes correctly show up, you are now ready to steno! ## Learning Stenography :id=learning-stenography @@ -60,7 +121,7 @@ On the display tab click 'Open stroke display'. With Plover disabled you should The steno code has three interceptable hooks. If you define these functions, they will be called at certain points in processing; if they return true, processing continues, otherwise it's assumed you handled things. ```c -bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[6]); +bool send_steno_chord_user(steno_mode_t mode, uint8_t chord[MAX_STROKE_SIZE]); ``` This function is called when a chord is about to be sent. Mode will be one of `STENO_MODE_BOLT` or `STENO_MODE_GEMINI`. This represents the actual chord that would be sent via whichever protocol. You can modify the chord provided to alter what gets sent. Remember to return true if you want the regular sending process to happen. @@ -72,15 +133,23 @@ bool process_steno_user(uint16_t keycode, keyrecord_t *record) { return true; } This function is called when a keypress has come in, before it is processed. The keycode should be one of `QK_STENO_BOLT`, `QK_STENO_GEMINI`, or one of the `STN_*` key values. ```c -bool postprocess_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t mode, uint8_t chord[6], int8_t pressed); +bool post_process_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t mode, uint8_t chord[MAX_STROKE_SIZE], int8_t n_pressed_keys); ``` -This function is called after a key has been processed, but before any decision about whether or not to send a chord. If `IS_PRESSED(record->event)` is false, and `pressed` is 0 or 1, the chord will be sent shortly, but has not yet been sent. This is where to put hooks for things like, say, live displays of steno chords or keys. +This function is called after a key has been processed, but before any decision about whether or not to send a chord. This is where to put hooks for things like, say, live displays of steno chords or keys. + +If `IS_PRESSED(record->event)` is false, and `n_pressed_keys` is 0 or 1, the chord will be sent shortly, but has not yet been sent. This relieves you of the need of keeping track of where a packet ends and another begins. + +The `chord` argument contains the packet of the current chord as specified by the protocol in use. This is *NOT* simply a list of chorded steno keys of the form `[STN_E, STN_U, STN_BR, STN_GR]`. Refer to the appropriate protocol section of this document to learn more about the format of the packets in your steno protocol/mode of choice. +The `n_pressed_keys` argument is the number of physical keys actually being held down. +This is not always equal to the number of bits set to 1 (aka the [Hamming weight](https://en.wikipedia.org/wiki/Hamming_weight)) in `chord` because it is possible to simultaneously press down four keys, then release three of those four keys and then press yet another key while the fourth finger is still holding down its key. +At the end of this scenario given as an example, `chord` would have five bits set to 1 but +`n_pressed_keys` would be set to 2 because there are only two keys currently being pressed down. ## Keycode Reference :id=keycode-reference -As defined in `keymap_steno.h`. +You must include `keymap_steno.h` to your `keymap.c` with `#include "keymap_steno.h"` before you can use these keycodes > Note: TX Bolt does not support the full set of keys. The TX Bolt implementation in QMK will map the GeminiPR keys to the nearest TX Bolt key so that one key map will work for both. @@ -124,10 +193,10 @@ As defined in `keymap_steno.h`. |`STN_SR`|`STN_SR`| `-S`| |`STN_DR`|`STN_DR`| `-D`| |`STN_ZR`|`STN_ZR`| `-Z`| -|`STN_FN`|| (GeminiPR only)| -|`STN_RES1`||(GeminiPR only)| -|`STN_RES2`||(GeminiPR only)| -|`STN_PWR`||(GeminiPR only)| +|`STN_FN`|| (Function)| +|`STN_RES1`||(Reset 1)| +|`STN_RES2`||(Reset 2)| +|`STN_PWR`||(Power)| If you do not want to hit two keys with one finger combined keycodes can be used. These are also defined in `keymap_steno.h`, and causes both keys to be reported as pressed or released. To use these keycodes define `STENO_COMBINEDMAP` in your `config.h` file. diff --git a/docs/feature_tap_dance.md b/docs/feature_tap_dance.md index c055a9989a..05134ec229 100644 --- a/docs/feature_tap_dance.md +++ b/docs/feature_tap_dance.md @@ -14,55 +14,48 @@ Optionally, you might want to set a custom `TAPPING_TERM` time by adding somethi ```c #define TAPPING_TERM 175 +#define TAPPING_TERM_PER_KEY ``` -The `TAPPING_TERM` time is the maximum time allowed between taps of your Tap Dance key, and is measured in milliseconds. For example, if you used the above `#define` statement and set up a Tap Dance key that sends `Space` on single-tap and `Enter` on double-tap, then this key will send `ENT` only if you tap this key twice in less than 175ms. If you tap the key, wait more than 175ms, and tap the key again you'll end up sending `SPC SPC` instead. +The `TAPPING_TERM` time is the maximum time allowed between taps of your Tap Dance key, and is measured in milliseconds. For example, if you used the above `#define` statement and set up a Tap Dance key that sends `Space` on single-tap and `Enter` on double-tap, then this key will send `ENT` only if you tap this key twice in less than 175ms. If you tap the key, wait more than 175ms, and tap the key again you'll end up sending `SPC SPC` instead. The `TAPPING_TERM_PER_KEY` definition is only needed if you control the tapping term through a [custom `get_tapping_term` function](tap_hold.md#tapping_term), which may be needed because `TAPPING_TERM` affects not just tap-dance keys. -Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro, that takes a number which will later be used as an index into the `tap_dance_actions` array. +Next, you will want to define some tap-dance keys, which is easiest to do with the `TD()` macro. That macro takes a number which will later be used as an index into the `tap_dance_actions` array and turns it into a tap-dance keycode. After this, you'll want to use the `tap_dance_actions` array to specify what actions shall be taken when a tap-dance key is in action. Currently, there are five possible options: * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when tapped once, `kc2` otherwise. When the key is held, the appropriate keycode is registered: `kc1` when pressed and held, `kc2` when tapped once, then pressed and held. * `ACTION_TAP_DANCE_LAYER_MOVE(kc, layer)`: Sends the `kc` keycode when tapped once, or moves to `layer`. (this functions like the `TO` layer keycode). - * This is the same as `ACTION_TAP_DANCE_DUAL_ROLE`, but renamed to something that is clearer about its functionality. Both names will work. * `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: Sends the `kc` keycode when tapped once, or toggles the state of `layer`. (this functions like the `TG` layer keycode). * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action. * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets. -* ~~`ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`~~: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`. - * This is deprecated in favor of the Per Key Tapping Term functionality, as outlined [here](tap_hold.md#tapping-term). You'd want to check for the specific `TD()` macro that you want to use (such as `TD(TD_ESC_CAPS)`) instead of using this specific Tap Dance function. The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. !> Keep in mind that only [basic keycodes](keycodes_basic.md) are supported here. Custom keycodes are not supported. -Similar to the first option, the second option is good for simple layer-switching cases. +Similar to the first option, the second and third option are good for simple layer-switching cases. -For more complicated cases, use the third or fourth options (examples of each are listed below). - -Finally, the fifth option is particularly useful if your non-Tap-Dance keys start behaving weirdly after adding the code for your Tap Dance keys. The likely problem is that you changed the `TAPPING_TERM` time to make your Tap Dance keys easier for you to use, and that this has changed the way your other keys handle interrupts. +For more complicated cases, like blink the LEDs, fiddle with the backlighting, and so on, use the fourth or fifth option. Examples of each are listed below. ## Implementation Details :id=implementation Well, that's the bulk of it! You should now be able to work through the examples below, and to develop your own Tap Dance functionality. But if you want a deeper understanding of what's going on behind the scenes, then read on for the explanation of how it all works! -The main entry point is `process_tap_dance()`, called from `process_record_quantum()`, which is run for every keypress, and our handler gets to run early. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. If it was the same, we increment the counter and reset the timer. - -This means that you have `TAPPING_TERM` time to tap the key again; you do not have to input all the taps within a single `TAPPING_TERM` timeframe. This allows for longer tap counts, with minimal impact on responsiveness. +Let's go over the three functions mentioned in `ACTION_TAP_DANCE_FN_ADVANCED` in a little more detail. They all receive the same too arguments: a pointer to a structure that holds all dance related state information, and a pointer to a use case specific state variable. The three functions differ in when they are called. The first, `on_each_tap_fn()`, is called every time the tap dance key is *pressed*. Before it is called, the counter is incremented and the timer is reset. The second function, `on_dance_finished_fn()`, is called when the tap dance is interrupted or ends because `TAPPING_TERM` milliseconds have passed since the last tap. When the `finished` field of the dance state structure is set to `true`, the `on_dance_finished_fn()` is skipped. After `on_dance_finished_fn()` was called or would have been called, but no sooner than when the tap dance key is *released*, `on_dance_reset_fn()` is called. It is possible to end a tap dance immediately, skipping `on_dance_finished_fn()`, but not `on_dance_reset_fn`, by calling `reset_tap_dance(state)`. -Our next stop is `tap_dance_task()`. This handles the timeout of tap-dance keys. +To accomplish this logic, the tap dance mechanics use three entry points. The main entry point is `process_tap_dance()`, called from `process_record_quantum()` *after* `process_record_kb()` and `process_record_user()`. This function is responsible for calling `on_each_tap_fn()` and `on_dance_reset_fn()`. In order to handle interruptions of a tap dance, another entry point, `preprocess_tap_dance()` is run right at the beginning of `process_record_quantum()`. This function checks whether the key pressed is a tap-dance key. If it is not, and a tap-dance was in action, we handle that first, and enqueue the newly pressed key. If it is a tap-dance key, then we check if it is the same as the already active one (if there's one active, that is). If it is not, we fire off the old one first, then register the new one. Finally, `tap_dance_task()` periodically checks whether `TAPPING_TERM` has passed since the last key press and finishes a tap dance if that is the case. -For the sake of flexibility, tap-dance actions can be either a pair of keycodes, or a user function. The latter allows one to handle higher tap counts, or do extra things, like blink the LEDs, fiddle with the backlighting, and so on. This is accomplished by using an union, and some clever macros. +This means that you have `TAPPING_TERM` time to tap the key again; you do not have to input all the taps within a single `TAPPING_TERM` timeframe. This allows for longer tap counts, with minimal impact on responsiveness. ## Examples :id=examples -### Simple Example :id=simple-example +### Simple Example: Send `ESC` on Single Tap, `CAPS_LOCK` on Double Tap :id=simple-example Here's a simple example for a single definition: 1. In your `rules.mk`, add `TAP_DANCE_ENABLE = yes` -2. In your `config.h` (which you can copy from `qmk_firmware/keyboards/planck/config.h` to your keymap directory), add `#define TAPPING_TERM 200` -3. In your `keymap.c` file, define the variables and definitions, then add to your keymap: +2. In your `keymap.c` file, define the variables and definitions, then add to your keymap: ```c // Tap Dance declarations @@ -92,40 +85,15 @@ All the enums used in the examples are declared like this: ```c // Enums defined for all examples: enum { - CT_SE, - CT_CLN, + TD_ESC_CAPS, CT_EGG, CT_FLSH, - X_TAP_DANCE -}; -``` - -#### Example 1: Send `:` on Single Tap, `;` on Double Tap :id=example-1 - -```c -void dance_cln_finished(qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code16(KC_COLN); - } else { - register_code(KC_SCLN); - } -} - -void dance_cln_reset(qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - unregister_code16(KC_COLN); - } else { - unregister_code(KC_SCLN); - } -} - -// All tap dance functions would go here. Only showing this one. -qk_tap_dance_action_t tap_dance_actions[] = { - [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_cln_finished, dance_cln_reset), + CT_CLN, + X_CTL, }; ``` -#### Example 2: Send "Safety Dance!" After 100 Taps :id=example-2 +#### Example 1: Send "Safety Dance!" After 100 Taps :id=example-1 ```c void dance_egg(qk_tap_dance_state_t *state, void *user_data) { @@ -140,7 +108,7 @@ qk_tap_dance_action_t tap_dance_actions[] = { }; ``` -#### Example 3: Turn LED Lights On Then Off, One at a Time :id=example-3 +#### Example 2: Turn LED Lights On Then Off, One at a Time :id=example-2 ```c // On each tap, light up one LED, from right to left @@ -181,15 +149,74 @@ void dance_flsh_reset(qk_tap_dance_state_t *state, void *user_data) { ergodox_right_led_3_off(); } -// All tap dances now put together. Example 3 is "CT_FLASH" +// All tap dances now put together. Example 2 is "CT_FLSH" qk_tap_dance_action_t tap_dance_actions[] = { - [CT_SE] = ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT), - [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, dance_cln_finished, dance_cln_reset), + [TD_ESC_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_ESC, KC_CAPS), [CT_EGG] = ACTION_TAP_DANCE_FN(dance_egg), [CT_FLSH] = ACTION_TAP_DANCE_FN_ADVANCED(dance_flsh_each, dance_flsh_finished, dance_flsh_reset) }; ``` +#### Example 3: Send `:` on Tap, `;` on Hold :id=example-3 + +With a little effort, powerful tap-hold configurations can be implemented as tap dances. To emit taps as early as possible, we need to act on releases of the tap dance key. There is no callback for this in the tap dance framework, so we use `process_record_user()`. + +```c +typedef struct { + uint16_t tap; + uint16_t hold; + uint16_t held; +} tap_dance_tap_hold_t; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + qk_tap_dance_action_t *action; + + switch (keycode) { + case TD(CT_CLN): // list all tap dance keycodes with tap-hold configurations + action = &tap_dance_actions[TD_INDEX(keycode)]; + if (!record->event.pressed && action->state.count && !action->state.finished) { + tap_dance_tap_hold_t *tap_hold = (tap_dance_tap_hold_t *)action->user_data; + tap_code16(tap_hold->tap); + } + } + return true; +} + +void tap_dance_tap_hold_finished(qk_tap_dance_state_t *state, void *user_data) { + tap_dance_tap_hold_t *tap_hold = (tap_dance_tap_hold_t *)user_data; + + if (state->pressed) { + if (state->count == 1 +#ifndef PERMISSIVE_HOLD + && !state->interrupted +#endif + ) { + register_code16(tap_hold->hold); + tap_hold->held = tap_hold->hold; + } else { + register_code16(tap_hold->tap); + tap_hold->held = tap_hold->tap; + } + } +} + +void tap_dance_tap_hold_reset(qk_tap_dance_state_t *state, void *user_data) { + tap_dance_tap_hold_t *tap_hold = (tap_dance_tap_hold_t *)user_data; + + if (tap_hold->held) { + unregister_code16(tap_hold->held); + tap_hold->held = 0; + } +} + +#define ACTION_TAP_DANCE_TAP_HOLD(tap, hold) \ + { .fn = {NULL, tap_dance_tap_hold_finished, tap_dance_tap_hold_reset}, .user_data = (void *)&((tap_dance_tap_hold_t){tap, hold, 0}), } + +qk_tap_dance_action_t tap_dance_actions[] = { + [CT_CLN] = ACTION_TAP_DANCE_TAP_HOLD(KC_COLN, KC_SCLN), +}; +``` + #### Example 4: 'Quad Function Tap-Dance' :id=example-4 By [DanielGGordon](https://github.com/danielggordon) @@ -329,7 +356,7 @@ And then simply use `TD(X_CTL)` anywhere in your keymap. If you want to implement this in your userspace, then you may want to check out how [DanielGGordon](https://github.com/qmk/qmk_firmware/tree/master/users/gordon) has implemented this in their userspace. -> In this configuration "hold" takes place **after** tap dance timeout (see `ACTION_TAP_DANCE_FN_ADVANCED_TIME`). To achieve instant hold, remove `state->interrupted` checks in conditions. As a result you may use comfortable longer tapping periods to have more time for taps and not to wait too long for holds (try starting with doubled `TAPPING_TERM`). +> In this configuration "hold" takes place **after** tap dance timeout. To achieve instant hold, remove `state->interrupted` checks in conditions. As a result you may use comfortable longer tapping periods to have more time for taps and not to wait too long for holds (try starting with doubled `TAPPING_TERM`). #### Example 5: Using tap dance for advanced mod-tap and layer-tap keys :id=example-5 @@ -511,8 +538,18 @@ void ql_reset(qk_tap_dance_state_t *state, void *user_data) { // Associate our tap dance key with its functionality qk_tap_dance_action_t tap_dance_actions[] = { - [QUOT_LAYR] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(NULL, ql_finished, ql_reset, 275) + [QUOT_LAYR] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ql_finished, ql_reset) }; + +// Set a long-ish tapping term for tap-dance keys +uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QK_TAP_DANCE ... QK_TAP_DANCE_MAX: + return 275; + default: + return TAPPING_TERM; + } +} ``` The above code is similar to that used in previous examples. The one point to note is that we need to be able to check which layers are active at any time so we can toggle them if needed. To do this we use the `layer_state_is(layer)` function which returns `true` if the given `layer` is active. @@ -521,6 +558,6 @@ The use of `cur_dance()` and `ql_tap_state` mirrors the above examples. The `case: TD_SINGLE_TAP` in `ql_finished` is similar to the above examples. The `TD_SINGLE_HOLD` case works in conjunction with `ql_reset()` to switch to `_MY_LAYER` while the tap dance key is held, and to switch away from `_MY_LAYER` when the key is released. This mirrors the use of `MO(_MY_LAYER)`. The `TD_DOUBLE_TAP` case works by checking whether `_MY_LAYER` is the active layer, and toggling it on or off accordingly. This mirrors the use of `TG(_MY_LAYER)`. -`tap_dance_actions[]` works similar to the above examples. Note that I used `ACTION_TAP_DANCE_FN_ADVANCED_TIME()` instead of `ACTION_TAP_DANCE_FN_ADVANCED()`. This is because I like my `TAPPING_TERM` to be short (\~175ms) for my non-tap-dance keys but find that this is too quick for me to reliably complete tap dance actions - thus the increased time of 275ms here. +`tap_dance_actions[]` works similar to the above examples. Note that, additionally, I set a longer tapping term for the tap dance keys. This is because I like my `TAPPING_TERM` to be short (\~175ms) for my non-tap-dance keys but find that this is too quick for me to reliably complete tap dance actions - thus the increased time of 275ms here. In order for the per-key tapping terms to take effect, `TAPPING_TERM_PER_KEY` must be defined in your `config.h`. Finally, to get this tap dance key working, be sure to include `TD(QUOT_LAYR)` in your `keymaps[]`. diff --git a/docs/feature_terminal.md b/docs/feature_terminal.md deleted file mode 100644 index f850622165..0000000000 --- a/docs/feature_terminal.md +++ /dev/null @@ -1,107 +0,0 @@ -# Terminal - -> This feature is currently *huge*, and should probably only be put on boards with a lot of memory, or for fun. - -The terminal feature is a command-line-like interface designed to communicate through a text editor with keystrokes. It's beneficial to turn off auto-indent features in your editor. - -To enable, stick this in your `rules.mk` or `Makefile`: - - TERMINAL_ENABLE = yes - -And use the `TERM_ON` and `TERM_OFF` keycodes to turn it on or off. - -When enabled, a `> ` prompt will appear, where you'll be able to type, backspace (a bell will ding if you reach the beginning and audio is enabled), and hit enter to send the command. Arrow keys are currently disabled so it doesn't get confused. Moving your cursor around with the mouse is discouraged. - -`#define TERMINAL_HELP` enables some other output helpers that aren't really needed with this page. - -Pressing "up" and "down" will allow you to cycle through the past 5 commands entered. - -## Future Ideas - -* Keyboard/user-extensible commands -* Smaller footprint -* Arrow key support -* Command history - Done -* SD card support -* LCD support for buffer display -* Keycode -> name string LUT -* Layer status -* *Analog/digital port read/write* -* RGB mode stuff -* Macro definitions -* EEPROM read/write -* Audio control - -## Current Commands - -### `about` - -Prints out the current version of QMK with a build date: - -``` -> about -QMK Firmware - v0.5.115-7-g80ed73-dirty - Built: 2017-08-29-20:24:44 -``` - - -### `print-buffer` - -Outputs the last 5 commands entered - -``` -> print-buffer -0. print-buffer -1. help -2. about -3. keymap 0 -4. help -5. flush-buffer -``` - -### `flush-buffer` - -Clears command buffer -``` -> flush-buffer -Buffer cleared! -``` - - -### `help` - - -Prints out the available commands: - -``` -> help -commands available: - about help keycode keymap exit print-buffer flush-buffer -``` - -### `keycode <layer> <row> <col>` - -Prints out the keycode value of a certain layer, row, and column: - -``` -> keycode 0 1 0 -0x29 (41) -``` - -### `keymap <layer>` - -Prints out the entire keymap for a certain layer - -``` -> keymap 0 -0x002b, 0x0014, 0x001a, 0x0008, 0x0015, 0x0017, 0x001c, 0x0018, 0x000c, 0x0012, 0x0013, 0x002a, -0x0029, 0x0004, 0x0016, 0x0007, 0x0009, 0x000a, 0x000b, 0x000d, 0x000e, 0x000f, 0x0033, 0x0034, -0x00e1, 0x001d, 0x001b, 0x0006, 0x0019, 0x0005, 0x0011, 0x0010, 0x0036, 0x0037, 0x0038, 0x0028, -0x5cd6, 0x00e0, 0x00e2, 0x00e3, 0x5cd4, 0x002c, 0x002c, 0x5cd5, 0x0050, 0x0051, 0x0052, 0x004f, -> -``` - -### `exit` - -Exits the terminal - same as `TERM_OFF`. diff --git a/docs/flashing.md b/docs/flashing.md index 271e15b13c..5e5dcb34e4 100644 --- a/docs/flashing.md +++ b/docs/flashing.md @@ -358,3 +358,46 @@ CLI Flashing sequence: 2. Wait for the OS to detect the device 3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/blackpill_f411_tinyuf2 --keymap default` 4. Wait for the keyboard to become available + +### `make` Targets + +* `:uf2-split-left` and `:uf2-split-right`: Flashes the firmware but also sets the handedness setting in EEPROM by generating a side specific firmware. + +## Raspberry Pi RP2040 UF2 + +The `rules.mk` setting for this bootloader is `rp2040`, and can be specified at the keymap or user level. + +To ensure compatibility with the rp2040 bootloader, make sure this block is present in your `rules.mk`: + +```make +# Bootloader selection +BOOTLOADER = rp2040 +``` + +Compatible flashers: + +* Any application able to copy a file from one place to another, such as _macOS Finder_ or _Windows Explorer_. + +Flashing sequence: + +1. Enter the bootloader using any of the following methods: + * Tap the `QK_BOOTLOADER` keycode + * Hold the `BOOTSEL` button on the PCB while plugin in the usb cable. + * Double-tap the `RESET` button on the PCB<sup>1</sup>. +2. Wait for the OS to detect the device +3. Copy the .uf2 file to the new USB disk +4. Wait for the keyboard to become available + +or + +CLI Flashing sequence: + +1. Enter the bootloader using any of the following methods: + * Tap the `QK_BOOTLOADER` keycode + * Hold the `BOOTSEL` button on the PCB while plugin in the usb cable. + * Double-tap the `RESET` button on the PCB<sup>1</sup>. +2. Wait for the OS to detect the device +3. Flash via QMK CLI eg. `qmk flash --keyboard handwired/onekey/rpi_pico --keymap default` +4. Wait for the keyboard to become available + +<sup>1</sup>: This works only if QMK was compiled with `RP2040_BOOTLOADER_DOUBLE_TAP_RESET` defined. diff --git a/docs/ja/_summary.md b/docs/ja/_summary.md index 81b5756c27..8516a5eaaa 100644 --- a/docs/ja/_summary.md +++ b/docs/ja/_summary.md @@ -85,7 +85,6 @@ * [スワップハンド](ja/feature_swap_hands.md) * [タップダンス](ja/feature_tap_dance.md) * [タップホールド設定](ja/tap_hold.md) - * [ターミナル](ja/feature_terminal.md) * [ユニコード](ja/feature_unicode.md) * [ユーザスペース](ja/feature_userspace.md) * [WPM 計算](ja/feature_wpm.md) diff --git a/docs/ja/config_options.md b/docs/ja/config_options.md index fb43d015f2..9da84e6e4f 100644 --- a/docs/ja/config_options.md +++ b/docs/ja/config_options.md @@ -108,7 +108,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。 * デバイスの USB 経由の最大電力(mA) を設定します (デフォルト: 500) * `#define USB_POLLING_INTERVAL_MS 10` * キーボード、マウス および 共有 (NKRO/メディアキー) インタフェースのための USB ポーリングレートをミリ秒で設定します -* `#define USB_SUSPEND_WAKEUP_DELAY 200` +* `#define USB_SUSPEND_WAKEUP_DELAY 0` * ウェイクアップパケットを送信した後で一時停止するミリ秒を設定します * `#define F_SCL 100000L` * I2C を使用するキーボードのための I2C クロックレート速度を設定します。デフォルトは `400000L` ですが、`split_common` を使っているキーボードは別でデフォルトは `100000L` です。 @@ -144,7 +144,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。 ## 設定可能な挙動 :id=behaviors-that-can-be-configured * `#define TAPPING_TERM 200` - * タップがホールドになるまでの時間。500以上に設定された場合、タップ期間中にタップされたキーもホールドになります。(訳注: PERMISSIVE_HOLDも参照) + * タップがホールドになるまでの時間。 * `#define TAPPING_TERM_PER_KEY` * キーごとの `TAPPING_TERM` 設定の処理を有効にします * `#define RETRO_TAPPING` diff --git a/docs/ja/custom_matrix.md b/docs/ja/custom_matrix.md index 277fc658d3..2c697bb148 100644 --- a/docs/ja/custom_matrix.md +++ b/docs/ja/custom_matrix.md @@ -87,17 +87,17 @@ void matrix_init(void) { } uint8_t matrix_scan(void) { - bool matrix_has_changed = false; + bool changed = false; // TODO: ここにマトリックススキャンルーチンを追加します // ハードウェアによるデバウンスがない場合 - 設定されているデバウンスルーチンを使用します - debounce(raw_matrix, matrix, MATRIX_ROWS, changed); + changed = debounce(raw_matrix, matrix, MATRIX_ROWS, changed); // 正しいキーボード動作のためにこれを呼び出す*必要があります* matrix_scan_quantum(); - return matrix_has_changed; + return changed; } ``` diff --git a/docs/ja/feature_dynamic_macros.md b/docs/ja/feature_dynamic_macros.md index 951b903127..3cff788007 100644 --- a/docs/ja/feature_dynamic_macros.md +++ b/docs/ja/feature_dynamic_macros.md @@ -40,6 +40,7 @@ QMK はその場で作られた一時的なマクロをサポートします。 | `DYNAMIC_MACRO_SIZE` | 128 | 動的マクロが使用できるメモリ量を設定します。これは限られたリソースであり、コントローラに依存します。 | | `DYNAMIC_MACRO_USER_CALL` | *定義なし* | これを定義すると、ユーザの `keymap.c` ファイルを使ってマクロが起動されます。 | | `DYNAMIC_MACRO_NO_NESTING` | *定義なし* | これを定義すると、別のマクロからマクロを呼び出す(入れ子になったマクロ)機能を無効にします。 | +| `DYNAMIC_MACRO_DELAY` | *定義なし* | 各キーを送信する時の待ち時間（ms単位）を設定します。 | 記録中にキーを押すたびに LED が点滅し始めた場合は、マクロバッファにマクロを入れるスペースがもう無いことを意味します。マクロを入れるには、他のマクロ(それらは同じバッファを共有します)を短くするか、`config.h` に `DYNAMIC_MACRO_SIZE` 定義を追加することでバッファを増やします(デフォルト値: 128; ヘッダ内のコメントを読んでください)。 diff --git a/docs/ja/feature_stenography.md b/docs/ja/feature_stenography.md index f8f7df11e1..b280084ae3 100644 --- a/docs/ja/feature_stenography.md +++ b/docs/ja/feature_stenography.md @@ -77,7 +77,7 @@ bool process_steno_user(uint16_t keycode, keyrecord_t *record) { return true; } この関数はキーが押されるとキーが処理される前に呼び出されます。キーコードは `QK_STENO_BOLT`、`QK_STENO_GEMINI` あるいは `STN_*` キー値のいずれかでなければなりません。 ```c -bool postprocess_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t mode, uint8_t chord[6], int8_t pressed); +bool post_process_steno_user(uint16_t keycode, keyrecord_t *record, steno_mode_t mode, uint8_t chord[6], int8_t pressed); ``` この関数はキーが処理された後、ただしコードを送信するかどうかを決める前に呼び出されます。`IS_PRESSED(record->event)` が false で、`pressed` が 0 または 1 の場合は、コードはまもなく送信されますが、まだ送信されてはいません。ここが速記コードあるいはキーのライブ表示などのフックを配置する場所です。 diff --git a/docs/ja/feature_tap_dance.md b/docs/ja/feature_tap_dance.md index a6d108f1e9..762816f21b 100644 --- a/docs/ja/feature_tap_dance.md +++ b/docs/ja/feature_tap_dance.md @@ -28,7 +28,6 @@ * `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: 1回タップすると `kc1` キーコードを送信し、2回タップすると `kc2` キーコードを送信します。キーを押し続けているときは、適切なキーコードが登録されます: キーを押し続けた場合は `kc1`、一度タップしてから続けてもう一度キーを押してそのまま押し続けたときは、 `kc2` が登録されます。 * `ACTION_TAP_DANCE_LAYER_MOVE(kc, layer)`: 1回タップすると `kc` キーコードが送信され、2回タップすると `layer` レイヤーに移動します(これは `TO` レイヤーキーコードのように機能します)。 - * この機能は `ACTION_TAP_DANCE_DUAL_ROLE` と同じですが、機能が明確になるように関数名を変更しました。どちらの関数名でも実行できます。 * `ACTION_TAP_DANCE_LAYER_TOGGLE(kc, layer)`: 1回タップすると `kc` キーコードが送信され、2回タップすると `layer` の状態をトグルします(これは `TG` レイヤーキーコードのように機能します)。 * `ACTION_TAP_DANCE_FN(fn)`: ユーザーキーマップに定義した指定の関数が呼び出されます。タップダンス実行の回数分タップすると、最後の時点で呼び出されます。 * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: タップする度にユーザーキーマップに定義した最初の関数が呼び出されます。タップダンスの実行が終わった時点で2番目の関数が呼び出され、タップダンスの実行をリセットするときに最後の関数が呼び出されます。 diff --git a/docs/ja/feature_terminal.md b/docs/ja/feature_terminal.md deleted file mode 100644 index 8e125ecee0..0000000000 --- a/docs/ja/feature_terminal.md +++ /dev/null @@ -1,112 +0,0 @@ -# ターミナル - -<!--- - original document: 0.8.147:docs/feature_terminal.md - git diff 0.8.147 HEAD -- docs/feature_terminal.md | cat ---> - -> この機能は現在のところ*巨大*であり、おそらく大量のメモリを搭載したキーボード、または楽しみのためにのみ配置する必要があります。 - -ターミナル機能はテキストエディタを介してキーストロークで通信するように設計されたコマンドラインのようなインタフェースです。エディタで自動インデント機能をオフにすることは有益です。 - -有効にするには、以下を `rules.mk` または `Makefile` に貼り付けます: - - TERMINAL_ENABLE = yes - -そして、オンまたはオフにするために、`TERM_ON` および `TERM_OFF` キーコードを使います。 - -有効な場合、`> ` プロンプトが現れ、ここでコマンドやバックスペース(オーディオが有効な場合は、先頭に到達するとベルが鳴ります)を入力することができ、エンターを入力するとコマンドを送信します。矢印キーは現在のところ無効なため、混乱することはありません。マウスでカーソルを移動することはお勧めしません。 - -`#define TERMINAL_HELP` は、このページでは実際には必要のない他の出力ヘルパーを有効にします。 - -"上矢印" および "下矢印" により、過去に入力した5つのコマンドを順に切り替えることができます。 - -## 今後のアイデア - -* キーボード/ユーザ拡張可能なコマンド -* より小さなフットプリント -* 矢印キーのサポート -* コマンド履歴 - 完了 -* SD カードのサポート -* バッファディスプレイのための LCD サポート -* キーコード -> 名称の対応表 -* レイヤー状態 -* *アナログ/デジタル ポートの読み込み/書き込み* -* RGB モード関連機能 -* マクロ定義 -* EEPROM の読み込み/書き込み -* オーディオ制御 - -## 現在のコマンド - -### `about` - -現在の QMK のバージョンとビルドした日の出力: - -``` -> about -QMK Firmware - v0.5.115-7-g80ed73-dirty - Built: 2017-08-29-20:24:44 -``` - - -### `print-buffer` - -最後に入力した5つのコマンドの出力 - -``` -> print-buffer -0. print-buffer -1. help -2. about -3. keymap 0 -4. help -5. flush-buffer -``` - -### `flush-buffer` - -コマンドバッファをクリア -``` -> flush-buffer -Buffer cleared! -``` - - -### `help` - - -利用可能なコマンドの出力: - -``` -> help -commands available: - about help keycode keymap exit print-buffer flush-buffer -``` - -### `keycode <layer> <row> <col>` - -特定のレイヤー、行および列のキーコード値の出力: - -``` -> keycode 0 1 0 -0x29 (41) -``` - -### `keymap <layer>` - -特定のレイヤーの全てのキーマップの出力 - -``` -> keymap 0 -0x002b, 0x0014, 0x001a, 0x0008, 0x0015, 0x0017, 0x001c, 0x0018, 0x000c, 0x0012, 0x0013, 0x002a, -0x0029, 0x0004, 0x0016, 0x0007, 0x0009, 0x000a, 0x000b, 0x000d, 0x000e, 0x000f, 0x0033, 0x0034, -0x00e1, 0x001d, 0x001b, 0x0006, 0x0019, 0x0005, 0x0011, 0x0010, 0x0036, 0x0037, 0x0038, 0x0028, -0x5cd6, 0x00e0, 0x00e2, 0x00e3, 0x5cd4, 0x002c, 0x002c, 0x5cd5, 0x0050, 0x0051, 0x0052, 0x004f, -> -``` - -### `exit` - -ターミナルの終了 - `TERM_OFF` と同じ。 diff --git a/docs/ja/understanding_qmk.md b/docs/ja/understanding_qmk.md index 1654f8e002..550ee3a7c0 100644 --- a/docs/ja/understanding_qmk.md +++ b/docs/ja/understanding_qmk.md @@ -161,7 +161,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115) * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77) * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94) - * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264) * [Quantum 固有のキーコードを識別して処理する](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291) この一連のイベントの中の任意のステップで (`process_record_kb()` のような)関数は `false` を返して、以降の処理を停止することができます。 diff --git a/docs/keycodes.md b/docs/keycodes.md index bd5af32dd3..d0ba8e25bf 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -219,13 +219,13 @@ See also: [Basic Keycodes](keycodes_basic.md) See also: [Quantum Keycodes](quantum_keycodes.md#qmk-keycodes) -|Key |Aliases |Description | -|-----------------|---------|---------------------------------------------------------------------------------| -|`QK_BOOTLOADER` |`QK_BOOT`|Put the keyboard into bootloader mode for flashing | -|`QK_DEBUG_TOGGLE`|`DB_TOGG`|Toggle debug mode | -|`QK_CLEAR_EEPROM`|`EE_CLR` |Reinitializes the keyboard's EEPROM (persistent memory) | -|`QK_MAKE` | |Sends `qmk compile -kb (keyboard) -km (keymap)`, or `qmk flash` if shift is held | -|`QK_REBOOT` |`QK_RBT` |Resets the keyboard. Does not load the bootloader | +|Key |Aliases |Description | +|-----------------|---------|-------------------------------------------------------------------------------------------------------------------------------------------------| +|`QK_BOOTLOADER` |`QK_BOOT`|Put the keyboard into bootloader mode for flashing | +|`QK_DEBUG_TOGGLE`|`DB_TOGG`|Toggle debug mode | +|`QK_CLEAR_EEPROM`|`EE_CLR` |Reinitializes the keyboard's EEPROM (persistent memory) | +|`QK_MAKE` | |Sends `qmk compile -kb (keyboard) -km (keymap)`, or `qmk flash` if shift is held. Puts keyboard into bootloader mode if shift & control are held | +|`QK_REBOOT` |`QK_RBT` |Resets the keyboard. Does not load the bootloader | ## Audio Keys :id=audio-keys @@ -337,6 +337,9 @@ See also: [Magic Keycodes](keycodes_magic.md) |`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control | |`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control | |`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap | +|`MAGIC_SWAP_ESCAPE_CAPSLOCK` |`EC_SWAP`|Swap Caps Lock and Escape | +|`MAGIC_UNSWAP_ESCAPE_CAPSLOCK` |`EC_NORM`|Unswap Caps Lock and Escape | +|`MAGIC_TOGGLE_ESCAPE_CAPSLOCK` |`EC_TOGG`|Toggle Caps Lock and Escape swap | |`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control | |`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control | |`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI | diff --git a/docs/keycodes_magic.md b/docs/keycodes_magic.md index 01eb69168e..982a301630 100644 --- a/docs/keycodes_magic.md +++ b/docs/keycodes_magic.md @@ -7,6 +7,9 @@ |`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control | |`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control | |`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap | +|`MAGIC_SWAP_ESCAPE_CAPSLOCK` |`EC_SWAP`|Swap Caps Lock and Escape | +|`MAGIC_UNSWAP_ESCAPE_CAPSLOCK` |`EC_NORM`|Unswap Caps Lock and Escape | +|`MAGIC_TOGGLE_ESCAPE_CAPSLOCK` |`EC_TOGG`|Toggle Caps Lock and Escape swap | |`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control | |`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control | |`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI | diff --git a/docs/platformdev_chibios_earlyinit.md b/docs/platformdev_chibios_earlyinit.md index aaa91ba438..e1256f2714 100644 --- a/docs/platformdev_chibios_earlyinit.md +++ b/docs/platformdev_chibios_earlyinit.md @@ -20,7 +20,7 @@ As such, if you wish to override this API consider limiting use to writing to lo | `#define STM32_BOOTLOADER_DUAL_BANK` | Relevant for dual-bank STM32 MCUs, signifies that a GPIO is to be toggled in order to enter bootloader mode. | `FALSE` | | `#define STM32_BOOTLOADER_DUAL_BANK_GPIO` | Relevant for dual-bank STM32 MCUs, the pin to toggle when attempting to enter bootloader mode, e.g. `B8` | `<none>` | | `#define STM32_BOOTLOADER_DUAL_BANK_POLARITY` | Relevant for dual-bank STM32 MCUs, the value to set the pin to in order to trigger charging of the RC circuit. e.g. `0` or `1`. | `0` | -| `#define STM32_BOOTLOADER_DUAL_BANK_DELAY` | Relevant for dual-bank STM32 MCUs, an arbitrary measurement of time to delay before resetting the MCU. Increasing number increases the delay. | `100000` | +| `#define STM32_BOOTLOADER_DUAL_BANK_DELAY` | Relevant for dual-bank STM32 MCUs, an arbitrary measurement of time to delay before resetting the MCU. Increasing number increases the delay. | `100` | Kinetis MCUs have no configurable options. diff --git a/docs/platformdev_proton_c.md b/docs/platformdev_proton_c.md new file mode 100644 index 0000000000..3afec893fa --- /dev/null +++ b/docs/platformdev_proton_c.md @@ -0,0 +1,77 @@ +# Proton C + +The Proton C is an Arm STM32F303xC based drop-in replacement for the Pro Micro. + +<img src="https://i.imgur.com/GdsN1Rdh.jpg" alt="Proton C" /> + +#### Features + +* Through-hole mounted USB-C Port +* 32-bit 72MHz Cortex-M4 processor (STM32F303CCT6) +* I2C, SPI, PWM, DMA, DAC, USART, I2S +* 23x 3.3V I/O Ports +* 1x 5V output for WS2812 LED chains +* 256kB flash +* 40kB RAM +* AST1109MLTRQ speaker footprint +* Reset button + +## Warnings + +Some of the PCBs compatible with Pro Micro have VCC (3.3V) and RAW (5V) pins connected (shorted) on the pcb. Using the Proton C will short 5V power from USB and regulated 3.3V which is connected directly to the MCU. Shorting those pins may damage the MCU on the Proton C. + +So far, it appears that this is only an issue on the Gherkin PCBs, but other PCBs may be affected in this way. + +In this case, you may want to not hook up the RAW pin at all. + +## Manual Conversion + +To use the Proton C natively, without having to specify `CONVERT_TO=proton_c`, you need to change the `MCU` line in `rules.mk`: + +``` +MCU = STM32F303 +BOARD = QMK_PROTON_C +``` + +Remove these variables if they exist: + +* `BOOTLOADER` +* `EXTRA_FLAGS` + +Finally convert all pin assignments in `config.h` to the stm32 equivalents. + +| Pro Micro Left | Proton C Left | | Proton C Right | Pro Micro Right | +|-----------|----------|-|----------|-----------| +| `D3` | `A9` | | 5v | RAW (5v) | +| `D2` | `A10` | | GND | GND | +| GND | GND | | FLASH | RESET | +| GND | GND | | 3.3v | VCC <sup>1</sup> | +| `D1` | `B7` | | `A2` | `F4` | +| `D0` | `B6` | | `A1` | `F5` | +| `D4` | `B5` | | `A0` | `F6` | +| `C6` | `B4` | | `B8` | `F7` | +| `D7` | `B3` | | `B13` | `B1` | +| `E6` | `B2` | | `B14` | `B3` | +| `B4` | `B1` | | `B15` | `B2` | +| `B5` | `B0` | | `B9` | `B6` | +| `B0` (RX LED) | `C13` <sup>2</sup> | | `C13` <sup>2</sup> | `D5` (TX LED) | + +You can also make use of several new pins on the extended portion of the Proton C: + +| Left | | Right | +|------|-|-------| +| `A4`<sup>3</sup> | | `B10` | +| `A5`<sup>4</sup> | | `B11` | +| `A6` | | `B12` | +| `A7` | | `A14`<sup>5</sup> (SWCLK) | +| `A8` | | `A13`<sup>5</sup> (SWDIO) | +| `A15` | | RESET<sup>6</sup> | + +Notes: + +1. On a Pro Micro VCC can be 3.3v or 5v. +2. A Proton C only has one onboard LED, not two like a Pro Micro. The Pro Micro has an RX LED on `D5` and a TX LED on `B0`. +3. `A4` is shared with the speaker. +4. `A5` is shared with the speaker. +5. `A13` and `A14` are used for hardware debugging (SWD). You can also use them for GPIO, but should use them last. +6. Short RESET to 3.3v (pull high) to reboot the MCU. This does not enter bootloader mode like a Pro Micro, it only resets the MCU. diff --git a/docs/platformdev_rp2040.md b/docs/platformdev_rp2040.md new file mode 100644 index 0000000000..d690ebebf8 --- /dev/null +++ b/docs/platformdev_rp2040.md @@ -0,0 +1,125 @@ +# Raspberry Pi RP2040 + +The following table shows the current driver status for peripherals on RP2040 MCUs: + +| System | Support | +| ---------------------------------------------------------------- | ---------------------------------------------- | +| [ADC driver](adc_driver.md) | Support planned (no ETA) | +| [Audio](audio_driver.md) | Support planned (no ETA) | +| [I2C driver](i2c_driver.md) | :heavy_check_mark: | +| [SPI driver](spi_driver.md) | :heavy_check_mark: | +| [WS2812 driver](ws2812_driver.md) | :heavy_check_mark: using `PIO` driver | +| [External EEPROMs](eeprom_driver.md) | :heavy_check_mark: using `I2C` or `SPI` driver | +| [EEPROM emulation](eeprom_driver.md#wear_leveling-configuration) | :heavy_check_mark: | +| [serial driver](serial_driver.md) | :heavy_check_mark: using `SIO` or `PIO` driver | +| [UART driver](uart_driver.md) | Support planned (no ETA) | + +## GPIO + +<img alt="Raspberry Pi Pico pinout" src="https://i.imgur.com/nLaiYDE.jpg" width="48%"/> +<img alt="Sparkfun RP2040 Pro Micro pinout" src="https://i.imgur.com/1TPAhrs.jpg" width="48%"/> + +!> The GPIO pins of the RP2040 are not 5V tolerant! + +### Pin nomenclature + +To address individual pins on the RP2040, QMK uses the `GPx` abbreviation -- where the `x` stands for the GPIO number of the pin. This number can likely be found on the official pinout diagram of your board. Note that these GPIO numbers match the RP2040 MCU datasheet, and don't necessarily match the number you see printed on the board. For instance the Raspberry Pi Pico uses numbers from 1 to 40 for their pins, but these are not identical to the RP2040's GPIO numbers. So if you want to use the pin 11 of the Pico for your keyboard, you would refer to it as `GP8` in the config files. + +### Alternate functions + +The RP2040 features flexible GPIO function multiplexing, this means that every pin can be connected to nearly all the internal peripherals like I2C, SPI, UART or PWM. This allows for flexible PCB designs that are much less restricted in the selection of GPIO pins. To find out which pin can use which peripheral refer to the official [Raspberry PI RP2040 datasheet](https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#page=14) section 1.4.3 GPIO functions. + +## Selecting hardware peripherals and drivers + +QMK RP2040 support builds upon ChibiOS and thus follows their convention for activating drivers and associated hardware peripherals. These tables only give a quick overview which values have to be used, please refer to the ChibiOS specific sections on the driver pages. + +### I2C Driver + +| RP2040 Peripheral | `mcuconf.h` values | `I2C_DRIVER` | +| ----------------- | ------------------ | ------------ | +| `I2C0` | `RP_I2C_USE_I2C0` | `I2CD1` | +| `I2C1` | `RP_I2C_USE_I2C1` | `I2CD2` | + +To configure the I2C driver please read the [ChibiOS/ARM](i2c_driver.md#arm-configuration) section. + +### SPI Driver + +| RP2040 Peripheral | `mcuconf.h` values | `SPI_DRIVER` | +| ----------------- | ------------------ | ------------ | +| `SPI0` | `RP_SPI_USE_SPI0` | `SPID0` | +| `SPI1` | `RP_SPI_USE_SPI1` | `SPID1` | + +To configure the SPI driver please read the [ChibiOS/ARM](spi_driver.md#chibiosarm-configuration) section. + +## Double-tap reset boot-loader entry :id=double-tap + +The double-tap reset mechanism is an alternate way in QMK to enter the embedded mass storage UF2 boot-loader of the RP2040. It enables bootloader entry by a fast double-tap of the reset pin on start up, which is similar to the behavior of AVR Pro Micros. This feature activated by default for the Pro Micro RP2040 board, but has to be configured for other boards. To activate it, add the following options to your keyboards `config.h` file: + +```c +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET // Activates the double-tap behavior +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 200U // Timeout window in ms in which the double tap can occur. +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED_MASK 0U // Specify a optional status led which blinks when entering the bootloader +``` + +## Pre-defined RP2040 boards + +QMK defines two boards that you can choose from to base your RP2040 powered keyboard upon. These boards provide pre-configured default pins and drivers. + +### Generic Pro Micro RP2040 + +This is the default board that is chosen, unless any other RP2040 board is selected in your keyboards `rules.mk` file. It assumes a pin layout for the I2C, SPI and Serial drivers which is identical to the Sparkfun Pro Micro RP2040, however all values can be overwritten by defining them in your keyboards `config.h` file. The [double-tap](#double-tap) reset to enter boot-loader behavior is activated by default. + + +| Driver configuration define | Value | +| -------------------------------------------------------------------------- | ------------------------------------ | +| **I2C driver** | | +| `I2C_DRIVER` | `I2CD2` | +| `I2C1_SDA_PIN` | `GP2` | +| `I2C1_SCL_PIN` | `GP3` | +| **SPI driver** | | +| `SPI_DRIVER` | `SPID0` | +| `SPI_SCK_PIN` | `GP18` | +| `SPI_MISO_PIN` | `GP20` | +| `SPI_MOSI_PIN` | `GP19` | +| **Serial driver** | | +| `SERIAL_USART_DRIVER` ([SIO Driver](serial_driver.md#the-sio-driver) only) | `SIOD0` | +| `SOFT_SERIAL_PIN` | undefined, use `SERIAL_USART_TX_PIN` | +| `SERIAL_USART_TX_PIN` | `GP0` | +| `SERIAL_USART_RX_PIN` | `GP1` | + +?> The pin-outs of Adafruit's KB2040 and Boardsource's Blok both deviate from the Sparkfun Pro Micro RP2040. Lookup the pin-out of these boards and adjust your keyboards pin definition accordingly if you want to use these boards. + +### Generic RP2040 board + +This board can be chosen as a base for RP2040 keyboards which configure all necessary pins and drivers themselves and do not wish to leverage the configuration matching the Generic Pro Micro RP2040 board. Thus it doesn't provide any pre-configured pins or drivers. To select this board add the following line to your keyboards `rules.mk` file. + +```make +BOARD = GENERIC_RP_RP2040 +``` + +## Split keyboard support + +Split keyboards are fully supported using the [serial driver](serial_driver.md) in both full-duplex and half-duplex configurations. Two driver subsystems are supported by the RP2040, the hardware UART based `SIO` and the Programmable IO based `PIO` driver. + +| Feature | [SIO Driver](serial_driver.md#the-sio-driver) | [PIO Driver](serial_driver.md#the-pio-driver) | +| ----------------------------- | --------------------------------------------- | --------------------------------------------- | +| Half-Duplex operation | | :heavy_check_mark: | +| Full-Duplex operation | :heavy_check_mark: | :heavy_check_mark: | +| `TX` and `RX` pin swapping | | :heavy_check_mark: | +| Any GPIO as `TX` and `RX` pin | Only UART capable pins | :heavy_check_mark: | +| Simple configuration | | :heavy_check_mark: | + +The `PIO` driver is much more flexible then the `SIO` driver, the only "downside" is the usage of `PIO` resources which in turn are not available for advanced user programs. Under normal circumstances, this resource allocation will be a non-issue. + +## RP2040 second stage bootloader selection + +As the RP2040 does not have any internal flash memory it depends on an external SPI flash memory chip to store and execute instructions from. To successfully interact with a wide variety of these chips a second stage bootloader that is compatible with the chosen external flash memory has to be supplied with each firmware image. By default an `W25Q080` compatible bootloader is assumed, but others can be chosen by adding one of the defines listed in the table below to your keyboards `config.h` file. + +| Compatible with flash chip | Selection | +| :------------------------- | ---------------------------------- | +| W25Q080 | Selected by default | +| AT25SF128A | `#define RP2040_FLASH_AT25SF128A` | +| GD25Q64CS | `#define RP2040_FLASH_GD25Q64CS` | +| W25X10CL | `#define RP2040_FLASH_W25X10CL` | +| IS25LP080 | `#define RP2040_FLASH_IS25LP080` | +| Generic 03H flash | `#define RP2040_FLASH_GENERIC_03H` | diff --git a/docs/proton_c_conversion.md b/docs/proton_c_conversion.md deleted file mode 100644 index 1e1b1e806d..0000000000 --- a/docs/proton_c_conversion.md +++ /dev/null @@ -1,91 +0,0 @@ -# Converting a board to use the Proton C - -Since the Proton C is a drop-in replacement for a Pro Micro we've made it easy to use. This page documents a handy automated process for converting keyboards, as well as documenting the manual process if you'd like to make use of Proton C features that aren't available on Pro Micros. - -## Automatic Conversion - -If a board currently supported in QMK uses a Pro Micro (or compatible board) and you want to use the Proton C, you can generate the firmware by appending `CONVERT_TO_PROTON_C=yes` (or `CTPC=yes`) to your make argument, like this: - - make 40percentclub/mf68:default CTPC=yes - -You can add the same argument to your keymap's `rules.mk`, which will accomplish the same thing. - -This exposes the `CONVERT_TO_PROTON_C` flag that you can use in your code with `#ifdef`s, like this: - -```c -#ifdef CONVERT_TO_PROTON_C - // Proton C code -#else - // Pro Micro code -#endif -``` - -If you get errors about `PORTB/DDRB`, etc not being defined, so you'll need to convert the keyboard's code to use the [GPIO Controls](gpio_control.md) that will work for both ARM and AVR. This shouldn't affect the AVR builds at all. - -The Proton C only has one on-board LED (C13), and by default, the TXLED (D5) is mapped to it. If you want the RXLED (B0) mapped to it instead, add this like to your `config.h`: - - #define CONVERT_TO_PROTON_C_RXLED - -## Feature Conversion - -These are defaults based on what has been implemented for ARM boards. - -| Feature | Notes | -|-------------------------------------|------------------------------------------------------------------------------------------------------------------| -| [Audio](feature_audio.md) | Enabled | -| [RGB Lighting](feature_rgblight.md) | Disabled | -| [Backlight](feature_backlight.md) | Forces [task driven PWM](feature_backlight.md#software-pwm-driver) until ARM can provide automatic configuration | -| USB Host (e.g. USB-USB converter) | Not supported (USB host code is AVR specific and is not currently supported on ARM) | -| [Split keyboards](feature_split_keyboard.md) | Partial - heavily dependent on enabled features | - -## Manual Conversion - -To use the Proton C natively, without having to specify `CTPC=yes`, you need to change the `MCU` line in `rules.mk`: - -``` -MCU = STM32F303 -BOARD = QMK_PROTON_C -``` - -Remove these variables if they exist: - -* `BOOTLOADER` -* `EXTRA_FLAGS` - -Finally convert all pin assignments in `config.h` to the stm32 equivalents. - -| Pro Micro Left | Proton C Left | | Proton C Right | Pro Micro Right | -|-----------|----------|-|----------|-----------| -| `D3` | `A9` | | 5v | RAW (5v) | -| `D2` | `A10` | | GND | GND | -| GND | GND | | FLASH | RESET | -| GND | GND | | 3.3v | VCC <sup>1</sup> | -| `D1` | `B7` | | `A2` | `F4` | -| `D0` | `B6` | | `A1` | `F5` | -| `D4` | `B5` | | `A0` | `F6` | -| `C6` | `B4` | | `B8` | `F7` | -| `D7` | `B3` | | `B13` | `B1` | -| `E6` | `B2` | | `B14` | `B3` | -| `B4` | `B1` | | `B15` | `B2` | -| `B5` | `B0` | | `B9` | `B6` | -| `B0` (RX LED) | `C13` <sup>2</sup> | | `C13` <sup>2</sup> | `D5` (TX LED) | - -You can also make use of several new pins on the extended portion of the Proton C: - -| Left | | Right | -|------|-|-------| -| `A4`<sup>3</sup> | | `B10` | -| `A5`<sup>4</sup> | | `B11` | -| `A6` | | `B12` | -| `A7` | | `A14`<sup>5</sup> (SWCLK) | -| `A8` | | `A13`<sup>5</sup> (SWDIO) | -| `A15` | | RESET<sup>6</sup> | - -Notes: - -1. On a Pro Micro VCC can be 3.3v or 5v. -2. A Proton C only has one onboard LED, not two like a Pro Micro. The Pro Micro has an RX LED on `D5` and a TX LED on `B0`. -3. `A4` is shared with the speaker. -4. `A5` is shared with the speaker. -5. `A13` and `A14` are used for hardware debugging (SWD). You can also use them for GPIO, but should use them last. -6. Short RESET to 3.3v (pull high) to reboot the MCU. This does not enter bootloader mode like a Pro Micro, it only resets the MCU. diff --git a/docs/quantum_keycodes.md b/docs/quantum_keycodes.md index a1923777ef..bc68cbc922 100644 --- a/docs/quantum_keycodes.md +++ b/docs/quantum_keycodes.md @@ -8,10 +8,10 @@ On this page we have documented keycodes between `0x00FF` and `0xFFFF` which are ## QMK Keycodes :id=qmk-keycodes -|Key |Aliases |Description | -|-----------------|---------|---------------------------------------------------------------------------------| -|`QK_BOOTLOADER` |`QK_BOOT`|Put the keyboard into bootloader mode for flashing | -|`QK_DEBUG_TOGGLE`|`DB_TOGG`|Toggle debug mode | -|`QK_CLEAR_EEPROM`|`EE_CLR` |Reinitializes the keyboard's EEPROM (persistent memory) | -|`QK_MAKE` | |Sends `qmk compile -kb (keyboard) -km (keymap)`, or `qmk flash` if shift is held | -|`QK_REBOOT` |`QK_RBT` |Resets the keyboard. Does not load the bootloader | +|Key |Aliases |Description | +|-----------------|---------|-------------------------------------------------------------------------------------------------------------------------------------------------| +|`QK_BOOTLOADER` |`QK_BOOT`|Put the keyboard into bootloader mode for flashing | +|`QK_DEBUG_TOGGLE`|`DB_TOGG`|Toggle debug mode | +|`QK_CLEAR_EEPROM`|`EE_CLR` |Reinitializes the keyboard's EEPROM (persistent memory) | +|`QK_MAKE` | |Sends `qmk compile -kb (keyboard) -km (keymap)`, or `qmk flash` if shift is held. Puts keyboard into bootloader mode if shift & control are held | +|`QK_REBOOT` |`QK_RBT` |Resets the keyboard. Does not load the bootloader | diff --git a/docs/quantum_painter.md b/docs/quantum_painter.md index a3705b62ce..2386a70933 100644 --- a/docs/quantum_painter.md +++ b/docs/quantum_painter.md @@ -24,6 +24,7 @@ Hardware supported: | GC9A01 | RGB LCD (circular) | 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = gc9a01_spi` | | ILI9163 | RGB LCD | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9163_spi` | | ILI9341 | RGB LCD | 240x320 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9341_spi` | +| ILI9488 | RGB LCD | 320x480 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ili9488_spi` | | SSD1351 | RGB OLED | 128x128 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = ssd1351_spi` | | ST7789 | RGB LCD | 240x320, 240x240 | SPI + D/C + RST | `QUANTUM_PAINTER_DRIVERS = st7789_spi` | @@ -654,6 +655,30 @@ The maximum number of displays can be configured by changing the following in yo #define ILI9341_NUM_DEVICES 3 ``` +### ILI9488 :id=qp-driver-ili9488 + +Enabling support for the ILI9488 in Quantum Painter is done by adding the following to `rules.mk`: + +```make +QUANTUM_PAINTER_ENABLE = yes +QUANTUM_PAINTER_DRIVERS = ili9488_spi +``` + +Creating a ILI9488 device in firmware can then be done with the following API: + +```c +painter_device_t qp_ili9488_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode); +``` + +The device handle returned from the `qp_ili9488_make_spi_device` function can be used to perform all other drawing operations. + +The maximum number of displays can be configured by changing the following in your `config.h` (default is 1): + +```c +// 3 displays: +#define ILI9488_NUM_DEVICES 3 +``` + ### SSD1351 :id=qp-driver-ssd1351 Enabling support for the SSD1351 in Quantum Painter is done by adding the following to `rules.mk`: diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md index aa59711592..52f16b4401 100644 --- a/docs/reference_info_json.md +++ b/docs/reference_info_json.md @@ -239,6 +239,42 @@ Example: The device version is a BCD (binary coded decimal) value, in the format `MMmr`, so the below value would look like `0x0100` in the generated code. This also means the maximum valid values for each part are `99.9.9`, despite it being a hexadecimal value under the hood. +### Encoders + +This section controls the basic [rotary encoder](feature_encoders.md) support. + +The following items can be set. Not every value is required. + +* `pin_a` + * __Required__. A pad definition +* `pin_b` + * __Required__. B pad definition +* `resolution` + * How many pulses the encoder registers between each detent + +Examples: + +```json +{ + "encoder": { + "rotary": [ + { "pin_a": "B5", "pin_b": "A2" } + ] + } +} +``` + +```json +{ + "encoder": { + "rotary": [ + { "pin_a": "B5", "pin_b": "A2", "resolution": 4 } + { "pin_a": "B6", "pin_b": "A3", "resolution": 2 } + ] + } +} +``` + ### Secure The following options can be configured: diff --git a/docs/serial_driver.md b/docs/serial_driver.md index 3e89deffad..fff63109a1 100644 --- a/docs/serial_driver.md +++ b/docs/serial_driver.md @@ -1,129 +1,301 @@ # 'serial' Driver -This driver powers the [Split Keyboard](feature_split_keyboard.md) feature. + +The serial driver powers the [Split Keyboard](feature_split_keyboard.md) feature. Several implementations are available, depending on the platform of your split keyboard. Note that none of the drivers support split keyboards with more then two halves. + +| Driver | AVR | ARM | Connection between halves | +| --------------------------------------- | ------------------ | ------------------ | --------------------------------------------------------------------------------------------- | +| [Bitbang](#bitbang) | :heavy_check_mark: | :heavy_check_mark: | Single wire communication. One wire is used for reception and transmission. | +| [USART Half-duplex](#usart-half-duplex) | | :heavy_check_mark: | Efficient single wire communication. One wire is used for reception and transmission. | +| [USART Full-duplex](#usart-full-duplex) | | :heavy_check_mark: | Efficient two wire communication. Two distinct wires are used for reception and transmission. | ?> Serial in this context should be read as **sending information one bit at a time**, rather than implementing UART/USART/RS485/RS232 standards. -Drivers in this category have the following characteristics: -* bit bang and USART Half-duplex provide data and signaling over a single conductor -* USART Full-duplex provide data and signaling over two conductors -* They are all limited to single master and single slave communication scheme +<hr> + +## Bitbang + +This is the Default driver, the absence of configuration assumes this driver. It works by [bit banging](https://en.wikipedia.org/wiki/Bit_banging) a GPIO pin using the CPU. It is therefore not as efficient as a dedicated hardware peripheral, which the Half-duplex and Full-duplex drivers use. -## Supported Driver Types +!> On ARM platforms the bitbang driver causes connection issues when using it together with the bitbang WS2812 driver. Choosing alternate drivers for both serial and WS2812 (instead of bitbang) is strongly recommended. -| | AVR | ARM | -| ----------------- | ------------------ | ------------------ | -| bit bang | :heavy_check_mark: | :heavy_check_mark: | -| USART Half-duplex | | :heavy_check_mark: | -| USART Full-duplex | | :heavy_check_mark: | +### Pin configuration + +``` + LEFT RIGHT ++-------+ SERIAL +-------+ +| SSP |-----------------| SSP | +| | VDD | | +| |-----------------| | +| | GND | | +| |-----------------| | ++-------+ +-------+ +``` -## Driver configuration +One GPIO pin is needed for the bitbang driver, as only one wire is used for receiving and transmitting data. This pin is referred to as the `SOFT_SERIAL_PIN` (SSP) in the configuration. A simple TRS or USB cable provides enough conductors for this driver to work. -### Bitbang -Default driver, the absence of configuration assumes this driver. To configure it, add this to your rules.mk: +### Setup + +To use the bitbang driver follow these steps to activate it. + +1. Change the `SERIAL_DRIVER` to `bitbang` in your keyboards `rules.mk` file: ```make SERIAL_DRIVER = bitbang ``` -Configure the driver via your config.h: +2. Configure the GPIO pin of your keyboard via the `config.h` file: + ```c #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -#define SELECT_SOFT_SERIAL_SPEED 1 // or 0, 2, 3, 4, 5 - // 0: about 189kbps (Experimental only) - // 1: about 137kbps (default) - // 2: about 75kbps - // 3: about 39kbps - // 4: about 26kbps - // 5: about 20kbps ``` -#### ARM +3. On ARM platforms you must turn on ChibiOS `PAL_USE_CALLBACKS` feature: + +* In `halconf.h` add the line `#define PAL_USE_CALLBACKS TRUE`. + +<hr> + +## USART Half-duplex + +Targeting ARM boards based on ChibiOS, where communication is offloaded to a USART hardware device that supports Half-duplex operation. The advantages over bitbanging are fast, accurate timings and reduced CPU usage. Therefore it is advised to choose this driver or the Full-duplex driver whenever possible. + +### Pin configuration + +``` + LEFT RIGHT ++-------+ | | +-------+ +| | R R | | +| | | SERIAL | | | +| TX |-----------------| TX | +| | VDD | | +| |-----------------| | +| | GND | | +| |-----------------| | ++-------+ +-------+ +``` + +Only one GPIO pin is needed for the Half-duplex driver, as only one wire is used for receiving and transmitting data. This pin is referred to as the `SERIAL_USART_TX_PIN` in the configuration. Take care that the pin you chose can act as the TX pin of the USART peripheral. A simple TRS or USB cable provides enough conductors for this driver to work. As the split connection is configured to work in open-drain mode, an **external pull-up resistor is needed to keep the line high**. Resistor values of 1.5kΩ to 8.2kΩ are known to work. -!> The bitbang driver causes connection issues with bitbang WS2812 driver +### Setup -Along with the generic options above, you must also turn on the `PAL_USE_CALLBACKS` feature in your halconf.h. +To use the Half-duplex driver follow these steps to activate it. If you target the Raspberry Pi RP2040 PIO implementation skip step 1. -### USART Half-duplex -Targeting STM32 boards where communication is offloaded to a USART hardware device. The advantage over bitbang is that this provides fast and accurate timings. `SERIAL_PIN_TX` for this driver is the configured USART TX pin. As this Pin is configured in open-drain mode an **external pull-up resistor is needed to keep the line high** (resistor values of 1.5k to 8.2k are known to work). To configure it, add this to your rules.mk: +1. Change the `SERIAL_DRIVER` to `usart` in your keyboards `rules.mk` file: ```make SERIAL_DRIVER = usart ``` -Configure the hardware via your config.h: +2. (RP2040 PIO only!) Change the `SERIAL_DRIVER` to `vendor` in your keyboards `rules.mk` file: + +```make +SERIAL_DRIVER = vendor +``` + +3. Configure the hardware of your keyboard via the `config.h` file: + +```c +#define SERIAL_USART_TX_PIN B6 // The GPIO pin that is used split communication. +``` + +For STM32 MCUs several GPIO configuration options can be changed as well. See the section ["Alternate Functions for selected STM32 MCUs"](alternate-functions-for-selected-stm32-mcus). + ```c -#define SOFT_SERIAL_PIN B6 // USART TX pin -//#define USART1_REMAP // Remap USART TX and RX pins on STM32F103 MCUs, see table below. -#define SELECT_SOFT_SERIAL_SPEED 1 // or 0, 2, 3, 4, 5 - // 0: about 460800 baud - // 1: about 230400 baud (default) - // 2: about 115200 baud - // 3: about 57600 baud - // 4: about 38400 baud - // 5: about 19200 baud -#define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 +#define USART1_REMAP // Remap USART TX and RX pins on STM32F103 MCUs, see table below. #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -#define SERIAL_USART_TIMEOUT 20 // USART driver timeout. default 20 ``` -You must also enable the ChibiOS `SERIAL` feature: -* In your board's halconf.h: `#define HAL_USE_SERIAL TRUE` -* In your board's mcuconf.h: `#define STM32_SERIAL_USE_USARTn TRUE` (where 'n' matches the peripheral number of your selected USART on the MCU) +1. Decide either for `SERIAL`, `SIO` or `PIO` subsystem, see the section ["Choosing a driver subsystem"](#choosing-a-driver-subsystem). -Do note that the configuration required is for the `SERIAL` peripheral, not the `UART` peripheral. +<hr> -### USART Full-duplex -Targeting STM32 boards where communication is offloaded to a USART hardware device. The advantage over bitbang is that this provides fast and accurate timings. USART Full-Duplex requires two conductors **without** pull-up resistors instead of one conductor with a pull-up resistor unlike the Half-duplex driver. Due to its internal design it is more efficent, which can result in even faster transmission speeds. +## USART Full-duplex -#### Pin configuration +Targeting ARM boards based on ChibiOS where communication is offloaded to an USART hardware device. The advantages over bitbanging are fast, accurate timings and reduced CPU usage. Therefore it is advised to choose this driver or the Full-duplex driver whenever possible. Due to its internal design it is slightly more efficient then the Half-duplex driver, but it should be primarily chosen if Half-duplex operation is not supported by the USART peripheral. -`SERIAL_USART_TX_PIN` is the USART `TX` pin, `SERIAL_USART_RX_PIN` is the USART `RX` pin. No external pull-up resistors are needed as the `TX` pin operates in push-pull mode. To use this driver the usart peripherals `TX` and `RX` pins must be configured with the correct Alternate-functions. If you are using a Proton-C everything is already setup, same is true for STM32F103 MCUs. For MCUs which are using a modern flexible GPIO configuration you have to specify these by setting `SERIAL_USART_TX_PAL_MODE` and `SERIAL_USART_RX_PAL_MODE`. Refeer to the corresponding datasheets of your MCU or find those settings in the table below. +### Pin configuration + +``` + LEFT RIGHT ++-------+ +-------+ +| | SERIAL | | +| TX |-----------------| RX | +| | SERIAL | | +| RX |-----------------| TX | +| | VDD | | +| |-----------------| | +| | GND | | +| |-----------------| | ++-------+ +-------+ +``` -#### Connecting the halves and Pin Swap -Please note that `TX` of the master half has to be connected with the `RX` pin of the slave half and `RX` of the master half has to be connected with the `TX` pin of the slave half! Usually this pin swap has to be done outside of the MCU e.g. with cables or on the pcb. Some MCUs like the STM32F303 used on the Proton-C allow this pin swap directly inside the MCU, this feature can be enabled using `#define SERIAL_USART_PIN_SWAP` in your config.h. +Two GPIO pins are needed for the Full-duplex driver, as two distinct wires are used for receiving and transmitting data. The pin transmitting data is the `TX` pin and refereed to as the `SERIAL_USART_TX_PIN`, the pin receiving data is the `RX` pin and refereed to as the `SERIAL_USART_RX_PIN` in this configuration. Please note that `TX` pin of the master half has to be connected with the `RX` pin of the slave half and the `RX` pin of the master half has to be connected with the `TX` pin of the slave half! Usually this pin swap has to be done outside of the MCU e.g. with cables or on the PCB. Some MCUs like the STM32F303 used on the Proton-C allow this pin swap directly inside the MCU. A simple TRRS or USB cable provides enough conductors for this driver to work. -#### Setup -To use the driver, add this to your rules.mk: +To use this driver the usart peripherals `TX` and `RX` pins must be configured with the correct Alternate-functions. If you are using a Proton-C everything is already setup, same is true for STM32F103 MCUs. For MCUs which are using a modern flexible GPIO configuration you have to specify these by setting `SERIAL_USART_TX_PAL_MODE` and `SERIAL_USART_RX_PAL_MODE`. Refer to the corresponding datasheets of your MCU or find those settings in the section ["Alternate Functions for selected STM32 MCUs"](#alternate-functions-for-selected-stm32-mcus). + +### Setup + +To use the Full-duplex driver follow these steps to activate it. If you target the Raspberry Pi RP2040 PIO implementation skip step 1. + +1. Change the `SERIAL_DRIVER` to `usart` in your keyboards `rules.mk` file: ```make SERIAL_DRIVER = usart ``` -Next configure the hardware via your config.h: +2. (RP2040 PIO only!) Change the `SERIAL_DRIVER` to `vendor` in your keyboards `rules.mk` file: + +```make +SERIAL_DRIVER = vendor +``` + +3. Configure the hardware of your keyboard via the `config.h` file: ```c #define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. #define SERIAL_USART_TX_PIN B6 // USART TX pin #define SERIAL_USART_RX_PIN B7 // USART RX pin -//#define USART1_REMAP // Remap USART TX and RX pins on STM32F103 MCUs, see table below. -//#define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve. - // Check if this feature is necessary with your keyboard design and available on the mcu. -#define SELECT_SOFT_SERIAL_SPEED 1 // or 0, 2, 3, 4, 5 - // 0: 460800 baud - // 1: 230400 baud (default) - // 2: 115200 baud - // 3: 57600 baud - // 4: 38400 baud - // 5: 19200 baud -#define SERIAL_USART_DRIVER SD1 // USART driver of TX and RX pin. default: SD1 +``` + +For STM32 MCUs several GPIO configuration options, including the ability for `TX` to `RX` pin swapping, can be changed as well. See the section ["Alternate Functions for selected STM32 MCUs"](alternate-functions-for-selected-stm32-mcus). + +```c +#define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve. (Only available on some MCUs) +#define USART1_REMAP // Remap USART TX and RX pins on STM32F103 MCUs, see table below. #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 -#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +``` + +1. Decide either for `SERIAL`, `SIO` or `PIO` subsystem, see the section ["Choosing a driver subsystem"](#choosing-a-driver-subsystem). + +<hr> + +## Choosing a driver subsystem + +### The `SERIAL` driver + +The `SERIAL` Subsystem is supported for the majority of ChibiOS MCUs and should be used whenever supported. Follow these steps in order to activate it: + +1. In your keyboards `halconf.h` add: + +```c +#define HAL_USE_SERIAL TRUE +``` + +2. In your keyboards `mcuconf.h`: activate the USART peripheral that is used on your MCU. The shown example is for an STM32 MCU, so this will not work on MCUs by other manufacturers. You can find the correct names in the `mcuconf.h` files of your MCU that ship with ChibiOS. + +Just below `#include_next <mcuconf.h>` add: + +```c +#include_next <mcuconf.h> + +#undef STM32_SERIAL_USE_USARTn +#define STM32_SERIAL_USE_USARTn TRUE +``` + +Where 'n' matches the peripheral number of your selected USART on the MCU. + +3. In you keyboards `config.h`: override the default USART `SERIAL` driver if you use a USART peripheral that does not belong to the default selected `SD1` driver. For instance, if you selected `STM32_SERIAL_USE_USART3` the matching driver would be `SD3`. + +```c + #define SERIAL_USART_DRIVER SD3 + ``` + +### The `SIO` driver + +The `SIO` Subsystem was added to ChibiOS with the 21.11 release and is only supported on selected MCUs. It should only be chosen when the `SERIAL` subsystem is not supported by your MCU. + +Follow these steps in order to activate it: + +1. In your keyboards `halconf.h` add: + +```c +#define HAL_USE_SIO TRUE +``` + +2. In your keyboards `mcuconf.h:` activate the USART peripheral that is used on your MCU. The shown example is for an STM32 MCU, so this will not work on MCUs by other manufacturers. You can find the correct names in the `mcuconf.h` files of your MCU that ship with ChibiOS. + +Just below `#include_next <mcuconf.h>` add: + +```c +#include_next <mcuconf.h> + +#undef STM32_SIO_USE_USARTn +#define STM32_SIO_USE_USARTn TRUE +``` + +Where 'n' matches the peripheral number of your selected USART on the MCU. + +3. In you keyboards `config.h`: override the default USART `SIO` driver if you use a USART peripheral that does not belong to the default selected `SIOD1` driver. For instance, if you selected `STM32_SERIAL_USE_USART3` the matching driver would be `SIOD3`. + +```c + #define SERIAL_USART_DRIVER SIOD3 + ``` + +### The `PIO` driver + +The `PIO` subsystem is a Raspberry Pi RP2040 specific implementation, using the integrated PIO peripheral and is therefore only available on this MCU. Because of the flexible nature of the PIO peripherals, **any** GPIO pin can be used as a `TX` or `RX` pin. Half-duplex and Full-duplex operation is fully supported. The Half-duplex operation mode uses the built-in pull-ups and GPIO manipulation on the RP2040 to drive the line high by default. An external pull-up is therefore not necessary. + +Configure the hardware via your config.h: +```c +#define SERIAL_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the Serial implementation uses the PIO0 peripheral +``` + +The Serial PIO program uses 2 state machines, 13 instructions and the complete interrupt handler of the PIO peripheral it is running on. + +<hr> + +## Advanced Configuration + +There are several advanced configuration options that can be defined in your keyboards `config.h` file: + +### Baudrate + +If you're having issues or need a higher baudrate with serial communication, you can change the baudrate which in turn controls the communication speed for serial. You want to lower the baudrate if you experience failed transactions. + +```c +#define SELECT_SOFT_SERIAL_SPEED {#} +``` + +| Speed | Bitbang | Half-duplex and Full-duplex | +| ----- | -------------------------- | --------------------------- | +| `0` | 189000 baud (experimental) | 460800 baud | +| `1` | 137000 baud (default) | 230400 baud (default) | +| `2` | 75000 baud | 115200 baud | +| `3` | 39000 baud | 57600 baud | +| `4` | 26000 baud | 38400 baud | +| `5` | 20000 baud | 19200 baud | + +Alternatively you can specify the baudrate directly by defining `SERIAL_USART_SPEED`. + +### Timeout + +This is the default time window in milliseconds in which a successful communication has to complete. Usually you don't want to change this value. But you can do so anyways by defining an alternate one in your keyboards `config.h` file: + +```c #define SERIAL_USART_TIMEOUT 20 // USART driver timeout. default 20 ``` -You must also enable the ChibiOS `SERIAL` feature: -* In your board's halconf.h: `#define HAL_USE_SERIAL TRUE` -* In your board's mcuconf.h: `#define STM32_SERIAL_USE_USARTn TRUE` (where 'n' matches the peripheral number of your selected USART on the MCU) +<hr> + +## Troubleshooting + +If you're having issues withe serial communication, you can enable debug messages that will give you insights which part of the communication failed. The enable these messages add to your keyboards `config.h` file: + +```c +#define SERIAL_DEBUG +``` + +?> The messages will be printed out to the `CONSOLE` output. For additional information, refer to [Debugging/Troubleshooting QMK](faq_debug.md). -Do note that the configuration required is for the `SERIAL` peripheral, not the `UART` peripheral. +## Alternate Functions for selected STM32 MCUs -#### Pins for USART Peripherals with Alternate Functions for selected STM32 MCUs +Pins for USART Peripherals with -##### STM32F303 / Proton-C [Datasheet](https://www.st.com/resource/en/datasheet/stm32f303cc.pdf) +### STM32F303 / Proton-C [Datasheet](https://www.st.com/resource/en/datasheet/stm32f303cc.pdf) Pin Swap available: :heavy_check_mark: -| Pin | Function | Mode | +| Pin | Function | Mode | | ---------- | -------- | ---- | | **USART1** | | | | PA9 | TX | AF7 | @@ -151,11 +323,11 @@ Pin Swap available: :heavy_check_mark: | PD8 | TX | AF7 | | PD9 | RX | AF7 | -##### STM32F072 [Datasheet](https://www.st.com/resource/en/datasheet/stm32f072c8.pdf) +### STM32F072 [Datasheet](https://www.st.com/resource/en/datasheet/stm32f072c8.pdf) Pin Swap available: :heavy_check_mark: -| Pin | Function | Mode | +| Pin | Function | Mode | | ------ | -------- | ---- | | USART1 | | | | PA9 | TX | AF1 | @@ -180,7 +352,7 @@ Pin Swap available: :heavy_check_mark: | PA0 | TX | AF4 | | PA1 | RX | AF4 | -##### STM32F103 Medium Density (C8-CB) [Datasheet](https://www.st.com/resource/en/datasheet/stm32f103c8.pdf) +### STM32F103 Medium Density (C8-CB) [Datasheet](https://www.st.com/resource/en/datasheet/stm32f103c8.pdf) Pin Swap available: N/A @@ -190,7 +362,7 @@ Pin remapping: The pins of USART Peripherals use default Pins that can be remapped to use other pins using the AFIO registers. Default pins are marked **bold**. Add the appropriate defines to your config.h file. -| Pin | Function | Mode | USART_REMAP | +| Pin | Function | Mode | USART_REMAP | | ---------- | -------- | ---- | ------------------- | | **USART1** | | | | | **PA9** | TX | AFPP | | diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md index 9b80fb179e..c1bcfe3ce9 100644 --- a/docs/understanding_qmk.md +++ b/docs/understanding_qmk.md @@ -155,7 +155,6 @@ The `process_record()` function itself is deceptively simple, but hidden within * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77) * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94) * `bool process_dynamic_tapping_term(uint16_t keycode, keyrecord_t *record)` - * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264) * [Identify and process Quantum-specific keycodes](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291) At any step during this chain of events a function (such as `process_record_kb()`) can `return false` to halt all further processing. diff --git a/docs/ws2812_driver.md b/docs/ws2812_driver.md index 8acac0b3aa..54e6e77d81 100644 --- a/docs/ws2812_driver.md +++ b/docs/ws2812_driver.md @@ -11,11 +11,12 @@ These LEDs are called "addressable" because instead of using a wire per color, e ## Supported Driver Types | | AVR | ARM | -|----------|--------------------|--------------------| +| -------- | ------------------ | ------------------ | | bit bang | :heavy_check_mark: | :heavy_check_mark: | | I2C | :heavy_check_mark: | | | SPI | | :heavy_check_mark: | | PWM | | :heavy_check_mark: | +| PIO | | :heavy_check_mark: | ## Driver configuration @@ -33,11 +34,11 @@ The default setting is 280 µs, which should work for most cases, but this can b Some variants of the WS2812 may have their color components in a different physical or logical order. For example, the WS2812B-2020 has physically swapped red and green LEDs, which causes the wrong color to be displayed, because the default order of the bytes sent over the wire is defined as GRB. In this case, you can change the byte order by defining `WS2812_BYTE_ORDER` as one of the following values: -|Byte order |Known devices | -|---------------------------------|-----------------------------| -|`WS2812_BYTE_ORDER_GRB` (default)|Most WS2812's, SK6812, SK6805| -|`WS2812_BYTE_ORDER_RGB` |WS2812B-2020 | -|`WS2812_BYTE_ORDER_BGR` |TM1812 | +| Byte order | Known devices | +| --------------------------------- | ----------------------------- | +| `WS2812_BYTE_ORDER_GRB` (default) | Most WS2812's, SK6812, SK6805 | +| `WS2812_BYTE_ORDER_RGB` | WS2812B-2020 | +| `WS2812_BYTE_ORDER_BGR` | TM1812 | ### Bitbang @@ -54,13 +55,13 @@ WS2812_DRIVER = bitbang The WS2812 LED communication topology depends on a serialized timed window. Different versions of the addressable LEDs have differing requirements for the timing parameters, for instance, of the SK6812. You can tune these parameters through the definition of the following macros: -| Macro |Default | AVR | ARM | -|---------------------|--------------------------------------------|--------------------|--------------------| -|`WS2812_TIMING` |`1250` | :heavy_check_mark: | :heavy_check_mark: | -|`WS2812_T0H` |`350` | :heavy_check_mark: | :heavy_check_mark: | -|`WS2812_T0L` |`WS2812_TIMING - WS2812_T0H` | | :heavy_check_mark: | -|`WS2812_T1H` |`900` | :heavy_check_mark: | :heavy_check_mark: | -|`WS2812_T1L` |`WS2812_TIMING - WS2812_T1H` | | :heavy_check_mark: | +| Macro | Default | AVR | ARM | +| --------------- | ---------------------------- | ------------------ | ------------------ | +| `WS2812_TIMING` | `1250` | :heavy_check_mark: | :heavy_check_mark: | +| `WS2812_T0H` | `350` | :heavy_check_mark: | :heavy_check_mark: | +| `WS2812_T0L` | `WS2812_TIMING - WS2812_T0H` | | :heavy_check_mark: | +| `WS2812_T1H` | `900` | :heavy_check_mark: | :heavy_check_mark: | +| `WS2812_T1L` | `WS2812_TIMING - WS2812_T1H` | | :heavy_check_mark: | ### I2C Targeting boards where WS2812 support is offloaded to a 2nd MCU. Currently the driver is limited to AVR given the known consumers are ps2avrGB/BMC. To configure it, add this to your rules.mk: @@ -107,16 +108,16 @@ To adjust the baudrate at which the SPI peripheral is configured, users will nee Only divisors of 2, 4, 8, 16, 32, 64, 128 and 256 are supported by hardware. -|Define |Default|Description | -|--------------------|-------|-------------------------------------| -|`WS2812_SPI_DIVISOR`|`16` |SPI source clock peripheral divisor | +| Define | Default | Description | +| -------------------- | ------- | ----------------------------------- | +| `WS2812_SPI_DIVISOR` | `16` | SPI source clock peripheral divisor | #### Testing Notes While not an exhaustive list, the following table provides the scenarios that have been partially validated: | | SPI1 | SPI2 | SPI3 | -|------|---------------------------------------------|-----------------------------------------|-----------------------| +| ---- | ------------------------------------------- | --------------------------------------- | --------------------- | | f072 | ? | B15 :heavy_check_mark: (needs SCK: B13) | N/A | | f103 | A7 :heavy_check_mark: | B15 :heavy_check_mark: | N/A | | f303 | A7 :heavy_check_mark: B5 :heavy_check_mark: | B15 :heavy_check_mark: | B5 :heavy_check_mark: | @@ -150,15 +151,32 @@ You must also turn on the PWM feature in your halconf.h and mcuconf.h While not an exhaustive list, the following table provides the scenarios that have been partially validated: -| | Status | -|-|-| -| f072 | ? | -| f103 | :heavy_check_mark: | -| f303 | :heavy_check_mark: | +| | Status | +| --------- | ------------------ | +| f072 | ? | +| f103 | :heavy_check_mark: | +| f303 | :heavy_check_mark: | | f401/f411 | :heavy_check_mark: | *Other supported ChibiOS boards and/or pins may function, it will be highly chip and configuration dependent.* +### PIO + +Targeting Raspberry Pi RP2040 boards only where WS2812 support is offloaded to an dedicated PIO implementation. This offloads processing of the WS2812 protocol from the MCU to a dedicated PIO program using DMA transfers. + +To configure it, add this to your rules.mk: + +```make +WS2812_DRIVER = vendor +``` + +Configure the hardware via your config.h: +```c +#define WS2812_PIO_USE_PIO1 // Force the usage of PIO1 peripheral, by default the WS2812 implementation uses the PIO0 peripheral +``` + +The WS2812 PIO programm uses 1 state machine, 4 instructions and does not use any interrupt handlers. + ### Push Pull and Open Drain Configuration The default configuration is a push pull on the defined pin. This can be configured for bitbang, PWM and SPI. diff --git a/docs/zh-cn/_summary.md b/docs/zh-cn/_summary.md index dbad1021fa..3baee6dc2e 100644 --- a/docs/zh-cn/_summary.md +++ b/docs/zh-cn/_summary.md @@ -91,7 +91,6 @@ * [换手](zh-cn/feature_swap_hands.md) * [一键多用](zh-cn/feature_tap_dance.md) * [点按配置](zh-cn/tap_hold.md) - * [终端](zh-cn/feature_terminal.md) * [Unicode](zh-cn/feature_unicode.md) * [用户空间](zh-cn/feature_userspace.md) * [WPM计算](zh-cn/feature_wpm.md) diff --git a/docs/zh-cn/custom_quantum_functions.md b/docs/zh-cn/custom_quantum_functions.md index 29c5089052..dba9e7e7c0 100644 --- a/docs/zh-cn/custom_quantum_functions.md +++ b/docs/zh-cn/custom_quantum_functions.md @@ -240,7 +240,7 @@ void suspend_wakeup_init_user(void) { ```c layer_state_t layer_state_set_user(layer_state_t state) { - switch (biton32(state)) { + switch (get_highest_layer(state)) { case _RAISE: rgblight_setrgb (0x00, 0x00, 0xFF); break; @@ -267,7 +267,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { ### `layer_state_set_*` 函数文档 -* 键盘/各子版本：`uint32_t layer_state_set_kb(uint32_t state)` +* 键盘/各子版本：`layer_state_t layer_state_set_kb(layer_state_t state)` * 布局: `layer_state_t layer_state_set_user(layer_state_t state)` @@ -325,7 +325,7 @@ void keyboard_post_init_user(void) { ```c layer_state_t layer_state_set_user(layer_state_t state) { - switch (biton32(state)) { + switch (get_highest_layer(state)) { case _RAISE: if (user_config.rgb_layer_change) { rgblight_sethsv_noeeprom_magenta(); rgblight_mode_noeeprom(1); } break; @@ -474,4 +474,3 @@ cancel_deferred_exec(my_token); ```c #define MAX_DEFERRED_EXECUTORS 16 ``` - |