summaryrefslogtreecommitdiff
path: root/converter
diff options
context:
space:
mode:
Diffstat (limited to 'converter')
-rw-r--r--converter/terminal_bluefruit/Makefile113
-rw-r--r--converter/terminal_bluefruit/README37
-rw-r--r--converter/terminal_bluefruit/config.h112
-rw-r--r--converter/terminal_bluefruit/keymap.c227
-rw-r--r--converter/terminal_bluefruit/led.c35
-rw-r--r--converter/terminal_bluefruit/matrix.c262
6 files changed, 786 insertions, 0 deletions
diff --git a/converter/terminal_bluefruit/Makefile b/converter/terminal_bluefruit/Makefile
new file mode 100644
index 0000000000..83d68fc252
--- /dev/null
+++ b/converter/terminal_bluefruit/Makefile
@@ -0,0 +1,113 @@
+# Target file name (without extension).
+TARGET = terminal_bluefruit
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+BLUEFRUIT_TRACE_SERIAL=true
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+
+
+#
+# PS/2 protocol implementations
+# USART is recommended if it is available, others are for reference purpose.
+# INT implementation will drop simultaneous key strokes.
+#
+#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
+PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
+#PS2_USE_BUSYWAIT = yes # uses primitive reference code
+
+ifdef PS2_USE_USART
+ SRC += protocol/ps2_usart.c
+ OPT_DEFS += -DPS2_USE_USART
+endif
+
+ifdef PS2_USE_INT
+ SRC += protocol/ps2.c
+ OPT_DEFS += -DPS2_USE_INT
+endif
+
+ifdef PS2_USE_BUSYWAIT
+ SRC += protocol/ps2.c
+ OPT_DEFS += -DPS2_USE_BUSYWAIT
+endif
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+
+include $(TOP_DIR)/protocol/bluefruit.mk
+include $(TOP_DIR)/protocol.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/converter/terminal_bluefruit/README b/converter/terminal_bluefruit/README
new file mode 100644
index 0000000000..6ff1bc92f3
--- /dev/null
+++ b/converter/terminal_bluefruit/README
@@ -0,0 +1,37 @@
+Keyboard converter for IBM terminal keyboard
+============================================
+It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy.
+I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys).
+
+Source code: https://github.com/tmk/tmk_keyboard
+Article: http://geekhack.org/index.php?topic=27272.0
+
+
+CONNECTION
+----------
+Keyboard ATMega32U4
+----------------------
+Data: PD2
+Clock: PD5
+
+And VCC and GND, of course. See RESOURCE for keyboard connector pin assign.
+
+
+BUILD
+-----
+$ git clone https://github.com/tmk/tmk_keyboard.git
+$ cd converter/terminal_usb
+$ make
+
+
+RESOURCE
+--------
+Soarer's Converter: http://geekhack.org/index.php?topic=17458.0
+102keys(1392595): http://geekhack.org/index.php?topic=10737.0
+122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html
+KbdBabel: http://www.kbdbabel.org/
+RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png
+DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png
+WinAVR: http://winavr.sourceforge.net/
+
+EOF
diff --git a/converter/terminal_bluefruit/config.h b/converter/terminal_bluefruit/config.h
new file mode 100644
index 0000000000..8bf139d35f
--- /dev/null
+++ b/converter/terminal_bluefruit/config.h
@@ -0,0 +1,112 @@
+/*
+Converter for 70% IBM Terminal Keyboard
+Author: Benjamin Gould, 2013
+Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x6535
+#define DEVICE_VER 0x0100
+#define MANUFACTURER t.m.k.
+#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth
+#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth
+
+
+/* matrix size */
+#define MATRIX_ROWS 17 // keycode bit: 3-0
+#define MATRIX_COLS 8 // keycode bit: 6-4
+
+
+/* legacy keymap support */
+// #define USE_LEGACY_KEYMAP
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \
+ (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \
+)
+
+/* USART configuration
+ * asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control
+ */
+#ifdef __AVR_ATmega32U4__
+ #define SERIAL_UART_BAUD 9600
+ #define SERIAL_UART_DATA UDR1
+ #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+ #define SERIAL_UART_RXD_VECT USART1_RX_vect
+ #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
+ #define SERIAL_UART_INIT() do { \
+ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
+ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
+ UCSR1B = (1<<TXEN1); /* TX: enable */ \
+ UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
+ (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
+ sei(); \
+ } while(0)
+#else
+# error "USART configuration is needed."
+#endif
+
+/*
+ * PS/2 Interrupt configuration
+ */
+#ifdef PS2_USE_INT
+/* uses INT1 for clock line(ATMega32U4) */
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+
+#define PS2_INT_INIT() do { \
+ EICRA |= ((1<<ISC11) | \
+ (0<<ISC10)); \
+} while (0)
+#define PS2_INT_ON() do { \
+ EIMSK |= (1<<INT1); \
+} while (0)
+#define PS2_INT_OFF() do { \
+ EIMSK &= ~(1<<INT1); \
+} while (0)
+#define PS2_INT_VECT INT1_vect
+#endif
+
+
+/*
+ * PS/2 Busywait configuration
+ */
+#ifdef PS2_USE_BUSYWAIT
+#define PS2_CLOCK_PORT PORTD
+#define PS2_CLOCK_PIN PIND
+#define PS2_CLOCK_DDR DDRD
+#define PS2_CLOCK_BIT 1
+
+#define PS2_DATA_PORT PORTD
+#define PS2_DATA_PIN PIND
+#define PS2_DATA_DDR DDRD
+#define PS2_DATA_BIT 0
+#endif
+
+#endif
diff --git a/converter/terminal_bluefruit/keymap.c b/converter/terminal_bluefruit/keymap.c
new file mode 100644
index 0000000000..716590a456
--- /dev/null
+++ b/converter/terminal_bluefruit/keymap.c
@@ -0,0 +1,227 @@
+/*
+Converter for 70% IBM Terminal Keyboard
+Author: Benjamin Gould, 2013
+Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+
+
+/*
+ * IBM Terminal keyboard 6110345(122keys)/1392595(102keys)
+ * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M
+ * http://www.seasip.info/VintagePC/ibm_1391406.html
+ *
+ * Keymap array:
+ * 8 bytes
+ * +---------+
+ * 0| |
+ * :| | 0x00-0x87
+ * ;| |
+ * 17| |
+ * +---------+
+ */
+#define KEYMAP( \
+ K08,K10,K18,K20,K28,K30,K38,K40,K48,K50,K57,K5F, \
+ K07,K0F,K17,K1F,K27,K2F,K37,K3F,K47,K4F,K56,K5E, \
+ \
+ K05,K06, K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K5D,K66, K67,K6E,K6F, K76,K77,K7E,K84, \
+ K04,K0C, K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B, K5C, K64,K65,K6D, K6C,K75,K7D,K7C, \
+ K03,K0B, K14,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K53,K5A, K63, K6B,K73,K74,K7B, \
+ K83,K0A, K12,K13,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K51,K59, K61,K62,K6A, K69,K72,K7A,K79, \
+ K01,K09, K11, K19, K29, K39, K58, K60, K68,K70,K71,K78 \
+) { \
+ { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
+ { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \
+ { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \
+ { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \
+ { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \
+ { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \
+ { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
+ { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \
+ { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \
+ { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \
+ { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
+ { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \
+ { KC_NO, KC_NO, KC_NO, KC_##K83, KC_##K84, KC_NO, KC_NO, KC_NO, }, \
+}
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* 0: default
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+ * `---' `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------. ,---------------.
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -|
+ * |-----------------------------------------------------------| |-----------| |---------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| |
+ * |-----------------------------------------------------------| `-----------' |-----------| +|
+ * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| |
+ * |-----------------------------------------------------------| ,---. |---------------|
+ * |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| |
+ * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+ * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| |
+ * `----' `---------------------------------------' `----' `-----------' `---------------'
+ */
+/*
+ KEYMAP(
+ F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,
+ F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
+
+ PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS,
+ SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS,
+ PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM,
+ APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT,
+ RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO
+ ),
+*/
+ /*
+ KEYMAP(
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS
+ ),
+ */
+ // pseudo ANSI
+
+ KEYMAP(
+ FN0, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO,
+ PSCR,PAUS,PGUP,PGDN,HOME,END, INS, DEL, LEFT,DOWN,UP, RGHT,
+
+ NO, NO, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, BSPC, NO, NO, NO, NO, NO, NO, NO,
+ NO, NO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, NO, NO, NO, NO, NO, NO, NO,
+ NO, NO, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, NO, NO, NO, NO, NO,
+ NO, NO, LSFT,FN1 ,Z, X, C, V, B, N, M, COMM,DOT, SLSH, FN1, RSFT, NO, NO, NO, NO, NO, NO, NO,
+ NO, NO, LCTL, LALT, SPC, LGUI, APP, NO, NO, NO, NO, NO
+ ),
+
+ // Momentary Function Layer
+ KEYMAP(
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,MUTE,VOLD,VOLU,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+
+ TRNS,TRNS, TRNS,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,UP ,END, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MS_L,MS_D,MS_U,MS_R,LEFT,DOWN, RGHT,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,PGDN,TRNS, TRNS,RSFT, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, BTN2, TRNS, BTN1, RALT, RCTL, TRNS, TRNS,TRNS,TRNS,TRNS
+ ),
+
+ // Mouse Layer
+ KEYMAP(
+ FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
+ TRNS,TRNS, TRNS,NO, NO, MS_U,NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
+ TRNS,TRNS, BTN2,BTN1,MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,NO, NO, NO, ENT, NO, NO, NO, NO, NO,
+ TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO,
+ TRNS,TRNS, TRNS, TRNS, BTN1, BTN2, TRNS, NO, NO, NO, NO, NO
+ ),
+
+ // vi Layer
+ KEYMAP(
+ FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
+ TRNS,TRNS, TRNS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO,
+ TRNS,TRNS, TRNS,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, NO, NO, NO, NO, NO,
+ TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO,
+ TRNS,TRNS, TRNS, TRNS, SPC, RALT, RCTL, NO, NO, NO, NO, NO
+ ),
+
+ // num lock layer
+ KEYMAP(
+ FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,
+
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,
+ TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS
+ ),
+
+};
+
+
+static const uint16_t fn_actions[] PROGMEM = {
+ [0] = ACTION_DEFAULT_LAYER_SET(0),
+ [1] = ACTION_LAYER_MOMENTARY(1),
+ [2] = ACTION_LAYER_MOMENTARY(2), //ACTION_LAYER_ON(2, ON_RELEASE),
+ [3] = KC_NO, //ACTION_LAYER_ON(3, ON_RELEASE),
+ [4] = KC_NO, //ACTION_LAYER_ON(4, ON_RELEASE),
+ [5] = KC_NO,
+ [6] = KC_NO,
+ [7] = KC_NO,
+};
+
+/*
+enum macro_id {
+ MS_UL,
+ MS_UR,
+ MS_DL,
+ MS_DR,
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ keyevent_t event = record->event;
+
+ switch (id) {
+ case MS_UL:
+ return (event.pressed ? MACRO( D(MS_L), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
+ case MS_UR:
+ return (event.pressed ? MACRO( D(MS_R), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) );
+ case MS_DL:
+ return (event.pressed ? MACRO( D(MS_L), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
+ case MS_DR:
+ return (event.pressed ? MACRO( D(MS_R), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) );
+ }
+ return MACRO_NONE;
+}
+*/
+
+uint8_t keymap_key_to_keycode(uint8_t layer, key_t key)
+{
+ return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]);
+}
+
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ action_t action;
+ action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]);
+ return action;
+}
diff --git a/converter/terminal_bluefruit/led.c b/converter/terminal_bluefruit/led.c
new file mode 100644
index 0000000000..e5bf41d4ab
--- /dev/null
+++ b/converter/terminal_bluefruit/led.c
@@ -0,0 +1,35 @@
+/*
+Converter for 70% IBM Terminal Keyboard
+Author: Benjamin Gould, 2013
+Based on code Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "ps2.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ uint8_t ps2_led = 0;
+ if (usb_led & (1<<USB_LED_SCROLL_LOCK))
+ ps2_led |= (1<<PS2_LED_SCROLL_LOCK);
+ if (usb_led & (1<<USB_LED_NUM_LOCK))
+ ps2_led |= (1<<PS2_LED_NUM_LOCK);
+ if (usb_led & (1<<USB_LED_CAPS_LOCK))
+ ps2_led |= (1<<PS2_LED_CAPS_LOCK);
+ ps2_host_set_led(ps2_led);
+}
diff --git a/converter/terminal_bluefruit/matrix.c b/converter/terminal_bluefruit/matrix.c
new file mode 100644
index 0000000000..36901536f1
--- /dev/null
+++ b/converter/terminal_bluefruit/matrix.c
@@ -0,0 +1,262 @@
+/*
+Copyright 2011 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "debug.h"
+#include "ps2.h"
+#include "matrix.h"
+
+
+static void matrix_make(uint8_t code);
+static void matrix_break(uint8_t code);
+#ifdef MATRIX_HAS_GHOST
+static bool matrix_has_ghost_in_row(uint8_t row);
+#endif
+
+
+/*
+ * Matrix Array usage:
+ * 'Scan Code Set 3' is assigned into 17x8 cell matrix.
+ *
+ * 8bit wide
+ * +---------+
+ * 0| |
+ * :| | 0x00-0x87
+ * ;| |
+ * 17| |
+ * +---------+
+ */
+static uint8_t matrix[MATRIX_ROWS];
+#define ROW(code) (code>>3)
+#define COL(code) (code&0x07)
+
+static bool is_modified = false;
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ debug_enable = true;
+ //debug_matrix = true;
+ //debug_keyboard = true;
+ //debug_mouse = false;
+
+ ps2_host_init();
+
+ // initialize matrix state: all keys off
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
+
+ return;
+}
+
+uint8_t matrix_scan(void)
+{
+
+ // scan code reading states
+ static enum {
+ RESET,
+ RESET_RESPONSE,
+ KBD_ID0,
+ KBD_ID1,
+ CONFIG,
+ READY,
+ F0,
+ } state = RESET;
+
+ is_modified = false;
+
+ uint8_t code;
+ if ((code = ps2_host_recv())) {
+ debug("r"); debug_hex(code); debug(" ");
+ }
+
+ switch (state) {
+ case RESET:
+ debug("wFF ");
+ if (ps2_host_send(0xFF) == 0xFA) {
+ debug("[ack]\nRESET_RESPONSE: ");
+ state = RESET_RESPONSE;
+ }
+ break;
+ case RESET_RESPONSE:
+ if (code == 0xAA) {
+ debug("[ok]\nKBD_ID: ");
+ state = KBD_ID0;
+ } else if (code) {
+ debug("err\nRESET: ");
+ state = RESET;
+ }
+ break;
+ // after reset receive keyboad ID(2 bytes)
+ case KBD_ID0:
+ if (code) {
+ state = KBD_ID1;
+ }
+ break;
+ case KBD_ID1:
+ if (code) {
+ debug("\nCONFIG: ");
+ state = CONFIG;
+ }
+ break;
+ case CONFIG:
+ debug("wF8 ");
+ if (ps2_host_send(0xF8) == 0xFA) {
+ debug("[ack]\nREADY\n");
+ state = READY;
+ }
+ break;
+ case READY:
+ switch (code) {
+ case 0x00:
+ break;
+ case 0xF0:
+ state = F0;
+ debug(" ");
+ break;
+ default: // normal key make
+ if (code < 0x88) {
+ matrix_make(code);
+ } else {
+ debug("unexpected scan code at READY: "); debug_hex(code); debug("\n");
+ }
+ state = READY;
+ debug("\n");
+ }
+ break;
+ case F0: // Break code
+ switch (code) {
+ case 0x00:
+ break;
+ default:
+ if (code < 0x88) {
+ matrix_break(code);
+ } else {
+ debug("unexpected scan code at F0: "); debug_hex(code); debug("\n");
+ }
+ state = READY;
+ debug("\n");
+ }
+ break;
+ }
+ return 1;
+}
+
+bool matrix_is_modified(void)
+{
+ return is_modified;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+#ifdef MATRIX_HAS_GHOST
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ if (matrix_has_ghost_in_row(i))
+ return true;
+ }
+#endif
+ return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return (matrix[row] & (1<<col));
+}
+
+inline
+uint8_t matrix_get_row(uint8_t row)
+{
+ return matrix[row];
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 01234567\n");
+ for (uint8_t row = 0; row < matrix_rows(); row++) {
+ phex(row); print(": ");
+ pbin_reverse(matrix_get_row(row));
+#ifdef MATRIX_HAS_GHOST
+ if (matrix_has_ghost_in_row(row)) {
+ print(" <ghost");
+ }
+#endif
+ print("\n");
+ }
+}
+
+uint8_t matrix_key_count(void)
+{
+ uint8_t count = 0;
+ for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+ count += bitpop(matrix[i]);
+ }
+ return count;
+}
+
+#ifdef MATRIX_HAS_GHOST
+inline
+static bool matrix_has_ghost_in_row(uint8_t row)
+{
+ // no ghost exists in case less than 2 keys on
+ if (((matrix[row] - 1) & matrix[row]) == 0)
+ return false;
+
+ // ghost exists in case same state as other row
+ for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+ if (i != row && (matrix[i] & matrix[row]) == matrix[row])
+ return true;
+ }
+ return false;
+}
+#endif
+
+
+inline
+static void matrix_make(uint8_t code)
+{
+ if (!matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] |= 1<<COL(code);
+ is_modified = true;
+ }
+}
+
+inline
+static void matrix_break(uint8_t code)
+{
+ if (matrix_is_on(ROW(code), COL(code))) {
+ matrix[ROW(code)] &= ~(1<<COL(code));
+ is_modified = true;
+ }
+}