summaryrefslogtreecommitdiff
path: root/converter/m0110_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/m0110_usb')
-rw-r--r--converter/m0110_usb/Makefile.tmk_rev1 (renamed from converter/m0110_usb/Makefile.pjrc)41
-rw-r--r--converter/m0110_usb/Makefile.tmk_rev296
-rw-r--r--converter/m0110_usb/README.md11
-rw-r--r--converter/m0110_usb/keymap_common.h106
-rw-r--r--converter/m0110_usb/keymap_default.c72
-rw-r--r--converter/m0110_usb/keymap_for_editor.c118
-rw-r--r--converter/m0110_usb/keymap_intl.c28
-rw-r--r--converter/m0110_usb/keymap_plain.c64
8 files changed, 250 insertions, 286 deletions
diff --git a/converter/m0110_usb/Makefile.pjrc b/converter/m0110_usb/Makefile.tmk_rev1
index e82564218e..f36fcc4b5d 100644
--- a/converter/m0110_usb/Makefile.pjrc
+++ b/converter/m0110_usb/Makefile.tmk_rev1
@@ -1,5 +1,5 @@
# Target file name (without extension).
-TARGET = m0110_pjrc
+TARGET = m0110_lufa
# Directory common source filess exist
TMK_DIR = ../../tmk_core
@@ -10,13 +10,14 @@ TARGET_DIR = .
# keyboard dependent files
SRC = matrix.c \
led.c \
+ keymap_common.c \
m0110.c
# To use own keymap file run make like: make keymap=hasu
-ifdef keymap
- SRC += keymap_$(keymap).c
+ifdef KEYMAP
+ SRC += keymap_$(KEYMAP).c
else
- SRC += keymap.c
+ SRC += keymap_default.c
endif
CONFIG_H = config.h
@@ -24,10 +25,8 @@ CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
-#MCU = at90usb162 # Teensy 1.0
-MCU = atmega32u4 # Teensy 2.0
-#MCU = at90usb646 # Teensy++ 1.0
-#MCU = at90usb1286 # Teensy++ 2.0
+#MCU = atmega32u2 # TMK converter rev2
+MCU = atmega32u4 # TMK converter rev1
# Processor frequency.
@@ -38,6 +37,29 @@ MCU = atmega32u4 # Teensy 2.0
F_CPU = 16000000
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
@@ -55,6 +77,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
@@ -67,7 +90,7 @@ VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)
-include $(TMK_DIR)/protocol/pjrc.mk
+include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/protocol.mk
include $(TMK_DIR)/common.mk
include $(TMK_DIR)/rules.mk
diff --git a/converter/m0110_usb/Makefile.tmk_rev2 b/converter/m0110_usb/Makefile.tmk_rev2
new file mode 100644
index 0000000000..e836456326
--- /dev/null
+++ b/converter/m0110_usb/Makefile.tmk_rev2
@@ -0,0 +1,96 @@
+# Target file name (without extension).
+TARGET = m0110_lufa
+
+# Directory common source filess exist
+TMK_DIR = ../../tmk_core
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = matrix.c \
+ led.c \
+ keymap_common.c \
+ m0110.c
+
+# To use own keymap file run make like: make keymap=hasu
+ifdef KEYMAP
+ SRC += keymap_$(KEYMAP).c
+else
+ SRC += keymap_default.c
+endif
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+MCU = atmega32u2 # TMK converter rev2
+#MCU = atmega32u4 # TMK converter rev1
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor
+
+
+
+#---------------- Programming Options --------------------------
+PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md
index c1ecb53b0b..bfd3261df5 100644
--- a/converter/m0110_usb/README.md
+++ b/converter/m0110_usb/README.md
@@ -59,19 +59,16 @@ To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
$ cd m0110_usb
- $ make -f Makefile clean
- $ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}]
+ $ make -f Makefile.rev2 clean
+ $ make -f Makefile.rev2 [KEYMAP={default|intl|spacefn|hasu}]
-Use `Makefile.teensy` instead for Teensy.
+Use `Maefile.tmk_rev1` for TMK converter Rev.1, `Makefile.teensy` for Teensy instead.
Keymap
------
-To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this.
-
- $ make -f Makefile clean
- $ make -f Makefile KEYMAP=name
+To create your own keymap copy existent keymap file to `keymap_name.c` and edit it.
diff --git a/converter/m0110_usb/keymap_common.h b/converter/m0110_usb/keymap_common.h
index 8bde7473dd..925556d977 100644
--- a/converter/m0110_usb/keymap_common.h
+++ b/converter/m0110_usb/keymap_common.h
@@ -1,5 +1,5 @@
/*
-Copyright 2011,2012,2014 Jun Wako <wakojun@gmail.com>
+Copyright 2011,2012,2014,2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@@ -24,64 +24,49 @@ extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS];
extern const uint16_t fn_actions[];
-/*
- * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
- * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist
- * on the M0110A, but since it generates a unique scan code which is not used for some other key in
- * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost)
- * identical to the combination of the M0110 along with the M0120 keypad. The only difference
- * (which is causing some problems as you will read below) is that the M0110+M0120 don't have
- * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
- * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
- * substituted the [comma] key with the [=] key, however its scancode is the same.
+/* Common layout for M0110 and M0110A
+ * This keymap works with both keyboards. As you can see, the M0110A is
+ * a superset of M0110 keyboard, only one exception is 'Enter'(34) of M0110
+ * does not exist on the M0110A.
*
- * Physical layout:
- * M0110A
* ,---------------------------------------------------------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *|
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
* |-----------------------------------------------------' | |---------------|
* |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
- * |---------------------------------------------------------' |-----------|Ent|
- * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
+ * |---------------------------------------------------------| |-----------|Ent|
+ * |Opt |Mac | Space |Ent| \|Lft|Rgt|Dn | | 0| .| |
* `---------------------------------------------------------' `---------------'
*
- * M0110 M0120
+ * M0110A scan codes
* ,---------------------------------------------------------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -| +| *|
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62|
* |---------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /|
- * |---------------------------------------------------------| |---------------|
- * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,|
+ * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E|
+ * |-----------------------------------------------------' | |---------------|
+ * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66|
* |---------------------------------------------------------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
- * `---------------------------------------------------------' |-----------|Ent|
- * |Opt|Mac | Space |Ent |Opt| | 0| .| |
- * `-----------------------------------------------' `---------------'
- * With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down)
+ * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| 4D| | 53| 54| 55| |
+ * `---------------------------------------------------------' |-----------| 4C|
+ * | 3A| 37| 31 | 2A| 46| 42| 48| | 52| 41| |
+ * `---------------------------------------------------------' `---------------'
*
- * NOTE: \ is located differently.
- * NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A).
- * NOTE: Left Shift and right Shift are logically same key.
- * NOTE: Left Option and right Option are logically same key.
- */
-
-/* Keymap definition Macro
+ * M0110 + M0120 scan codes
* ,---------------------------------------------------------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *|
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62|
* |---------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
- * |-----------------------------------------------------' | |---------------|
- * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
+ * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E|
* |---------------------------------------------------------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
- * |---------------------------------------------------------| |-----------|Ent|
- * |Opt |Mac | Space |Ent| \|Lft|Rgt|Dn | | 0| .| |
- * `---------------------------------------------------------' `---------------'
- * NOTE: Ent between Space and \ means Enter on M0110.
+ * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66|
+ * |---------------------------------------------------------| |---------------|
+ * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| | 53| 54| 55| |
+ * `---------------------------------------------------------' |-----------| 4C|
+ * | 3A| 37| 31 | 34| 3A| | 52| 41| |
+ * `------------------------------------------------' `---------------'
+ * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two.
*/
#define KEYMAP( \
K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \
@@ -106,25 +91,30 @@ extern const uint16_t fn_actions[];
{ KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \
}
-/* International keyboard
- * ,---------------------------------------------------------.
- * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33|
- * |---------------------------------------------------------|
- * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A|
- * |------------------------------------------------------, |
- * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| |
- * |---------------------------------------------------------|
- * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38|
- * `---------------------------------------------------------'
- * | 3A| 37| 34 | 31| 3A|
- * `------------------------------------------------'
+/* International keyboard layout for M0110 + M0120
+ * https://en.wikipedia.org/wiki/File:Apple_Macintosh_Plus_Keyboard.jpg
+ * Probably International keyboard layout of M0110A doesn't exist.
+ *
+ * M0110 + M0120 scan codes
+ * ,---------------------------------------------------------. ,---------------.
+ * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62|
+ * |---------------------------------------------------------| |---------------|
+ * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E|
+ * |------------------------------------------------------, | |---------------|
+ * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | | 56| 57| 58| 66|
+ * |---------------------------------------------------------| |---------------|
+ * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38| | 53| 54| 55| |
+ * `---------------------------------------------------------' |-----------| 4C|
+ * | 3A| 37| 34 | 31| 3A| | 52| 41| |
+ * `------------------------------------------------' `---------------'
+ * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two.
*/
#define KEYMAP_INTL( \
K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \
K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K59,K5B,K5C,K4E, \
K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24, K56,K57,K58,K66, \
- K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A, K4D, K53,K54,K55,K4C, \
- K3A,K37, K34, K31, K46,K42,K48, K52, K41 \
+ K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A, K53,K54,K55,K4C, \
+ K3A,K37, K34, K31, K52, K41 \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
{ KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \
@@ -134,8 +124,8 @@ extern const uint16_t fn_actions[];
{ KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_NO, KC_##K37 }, \
{ KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
- { KC_NO, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_##K47 }, \
- { KC_##K48, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \
+ { KC_NO, KC_##K41, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K47 }, \
+ { KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_NO, KC_##K4E, KC_NO }, \
{ KC_NO, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \
{ KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \
diff --git a/converter/m0110_usb/keymap_default.c b/converter/m0110_usb/keymap_default.c
index b0b8ee220a..ff7478d1b5 100644
--- a/converter/m0110_usb/keymap_default.c
+++ b/converter/m0110_usb/keymap_default.c
@@ -20,15 +20,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
+#ifdef KEYMAP_SECTION_ENABLE
+const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
+#else
const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
+#endif
/* Default:
* M0110 M0120
* ,---------------------------------------------------------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *|
+ * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *|
* |---------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| -|
* |---------------------------------------------------------| |---------------|
- * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,|
+ * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
@@ -52,27 +56,40 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
- LALT,LGUI, SPC, FN0, BSLS,LEFT,RGHT,DOWN, P0, PDOT
+ LALT,LGUI, SPC, FN0, FN13,LEFT,RGHT,DOWN, P0, PDOT
),
- /* Cursor Layer
+ /* Cursor Layer:
+ * M0110 M0120
* ,---------------------------------------------------------. ,---------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -| +| *|
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
* |---------------------------------------------------------| |---------------|
- * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |INS| | 7| 8| 9| /|
+ * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |INS| | | 7| 8| 9| -|
* |---------------------------------------------------------| |---------------|
- * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| ,|
+ * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
* |Opt|Mac | Space |Fn |Opt| | 0| .| |
* `-----------------------------------------------' `---------------'
+ * M0110A
+ * ,---------------------------------------------------------. ,---------------.
+ * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
+ * |---------------------------------------------------------| |---------------|
+ * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |INS| | | 7| 8| 9| -|
+ * |-----------------------------------------------------' | |---------------|
+ * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +|
+ * |---------------------------------------------------------| |---------------|
+ * |Shift |End| |PgD| | | | |End|PgD|Dow|Shft|PgU| | 1| 2| 3| |
+ * |---------------------------------------------------------| |-----------|Ent|
+ * |Opt |Mac | Space | \|Hom|End|PgD| | 0| .| |
+ * `---------------------------------------------------------' `---------------'
*/
[1] = KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
- CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, P7, P8, P9, PMNS,
+ CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS,
LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS,
LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT,
- LALT,LGUI, SPC, FN0, INS, HOME,END, PGDN, P0, PDOT
+ LALT,LGUI, SPC, FN0, FN13,HOME,END, PGDN, P0, PDOT
),
};
@@ -80,6 +97,41 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
/*
* Fn action definition
*/
+#ifdef KEYMAP_SECTION_ENABLE
+const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
+#else
const uint16_t fn_actions[] PROGMEM = {
+#endif
[0] = ACTION_LAYER_MOMENTARY(1),
+ [1] = ACTION_LAYER_MOMENTARY(2),
+ [2] = ACTION_LAYER_MOMENTARY(3),
+ [3] = ACTION_LAYER_MOMENTARY(4),
+ [4] = ACTION_LAYER_MOMENTARY(5),
+ [5] = ACTION_LAYER_MOMENTARY(6),
+ [6] = ACTION_LAYER_MOMENTARY(7),
+ [7] = ACTION_LAYER_TOGGLE(1),
+ [8] = ACTION_LAYER_TOGGLE(2),
+ [9] = ACTION_LAYER_TOGGLE(3),
+ [10] = ACTION_LAYER_TAP_TOGGLE(1),
+ [11] = ACTION_LAYER_TAP_TOGGLE(2),
+ [12] = ACTION_LAYER_TAP_TOGGLE(3),
+ [13] = ACTION_LAYER_TAP_KEY(1, KC_BSLASH),
+ [14] = ACTION_LAYER_TAP_KEY(2, KC_TAB),
+ [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER),
+ [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
+ [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
+ [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
+ [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
+ [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
+ [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
+ [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
+ [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
+ [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
+ [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
+ [26] = ACTION_MODS_ONESHOT(MOD_LCTL),
+ [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
+ [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
+ [29] = ACTION_MODS_ONESHOT(MOD_LSFT),
+ [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE),
+ [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH),
};
diff --git a/converter/m0110_usb/keymap_for_editor.c b/converter/m0110_usb/keymap_for_editor.c
deleted file mode 100644
index d20f298f87..0000000000
--- a/converter/m0110_usb/keymap_for_editor.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <stdint.h>
-#include "keycode.h"
-#include "keymap_common.h"
-
-
-#ifdef KEYMAP_SECTION_ENABLE
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = {
-#else
-const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
-#endif
- /* Default:
- * ,---------------------------------------------------------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *|
- * |---------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
- * |-----------------------------------------------------' | |---------------|
- * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +|
- * |---------------------------------------------------------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
- * |---------------------------------------------------------| |-----------|Ent|
- * |Ctl |Gui | Space |Alt| \|Lft|Rgt|Dn | | 0| .| |
- * `---------------------------------------------------------' `---------------'
- */
- [0] = KEYMAP(
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, CLR, EQL, PSLS,PAST,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
- LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, FN15, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
- LCTL,LGUI, FN16, LALT,FN31,LEFT,RGHT,DOWN, P0, PDOT
- ),
- /* Cursor Layer(WASD, IJKL)
- * ,---------------------------------------------------------. ,---------------.
- * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
- * |---------------------------------------------------------| |---------------|
- * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -|
- * |-----------------------------------------------------' | |---------------|
- * |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +|
- * |---------------------------------------------------------| |---------------|
- * |Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| |
- * |---------------------------------------------------------| |-----------|Ent|
- * |Ctl |Gui | Space |Alt | \|Hom|End|PgD| | 0| .| |
- * `---------------------------------------------------------' `---------------'
- */
- [3] = KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
- CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS,
- LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS,
- LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT,
- LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT
- ),
- [4] = KEYMAP(
- ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
- CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS,
- LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS,
- LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT,
- LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT
- ),
- [7] = {},
-};
-
-
-/*
- * Fn action definition
- */
-#ifdef KEYMAP_SECTION_ENABLE
-const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = {
-#else
-const uint16_t fn_actions[] PROGMEM = {
-#endif
- [0] = ACTION_LAYER_MOMENTARY(1),
- [1] = ACTION_LAYER_MOMENTARY(2),
- [2] = ACTION_LAYER_MOMENTARY(3),
- [3] = ACTION_LAYER_MOMENTARY(4),
- [4] = ACTION_LAYER_MOMENTARY(5),
- [5] = ACTION_LAYER_MOMENTARY(6),
- [6] = ACTION_LAYER_MOMENTARY(7),
- [7] = ACTION_LAYER_TOGGLE(1),
- [8] = ACTION_LAYER_TOGGLE(2),
- [9] = ACTION_LAYER_TOGGLE(3),
- [10] = ACTION_LAYER_TAP_TOGGLE(1),
- [11] = ACTION_LAYER_TAP_TOGGLE(2),
- [12] = ACTION_LAYER_TAP_TOGGLE(3),
- [13] = ACTION_LAYER_TAP_KEY(1, KC_F),
- [14] = ACTION_LAYER_TAP_KEY(2, KC_J),
- [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER),
- [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE),
- [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON),
- [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE),
- [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH),
- [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE),
- [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE),
- [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE),
- [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER),
- [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
- [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE),
- [26] = ACTION_MODS_ONESHOT(MOD_LCTL),
- [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC),
- [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE),
- [29] = ACTION_MODS_ONESHOT(MOD_LSFT),
- [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE),
- [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH),
-};
diff --git a/converter/m0110_usb/keymap_intl.c b/converter/m0110_usb/keymap_intl.c
index 80b029305f..6cc251a289 100644
--- a/converter/m0110_usb/keymap_intl.c
+++ b/converter/m0110_usb/keymap_intl.c
@@ -30,29 +30,17 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* |------------------------------------------------------, | |---------------|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| ,|
* |---------------------------------------------------------| |---------------|
- * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
+ * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /| | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
- * |Opt|Mac | Space |Fn |Opt| | 0| .| |
+ * |Opt|Mac | Space |Fn | | | 0| .| |
* `-----------------------------------------------' `---------------'
- * M0110A(not existent?)
- * ,---------------------------------------------------------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *|
- * |---------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Ret| | 7| 8| 9| -|
- * |------------------------------------------------------, | |---------------|
- * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| +|
- * |---------------------------------------------------------| |---------------|
- * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
- * |---------------------------------------------------------| |-----------|Ent|
- * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
- * `---------------------------------------------------------' `---------------'
*/
[0] = KEYMAP_INTL(
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,ENT, P7, P8, P9, PMNS,
LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, P4, P5, P6, PPLS,
- LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
- LALT,LGUI, SPC, FN0, LEFT,RGHT,DOWN, P0, PDOT
+ LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, P1, P2, P3, PENT,
+ LALT,LGUI, SPC, FN0, P0, PDOT
),
/* Cursor Layer
* ,---------------------------------------------------------. ,---------------.
@@ -62,17 +50,17 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = {
* |------------------------------------------------------, | |---------------|
* |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Ins| | | 4| 5| 6| ,|
* |---------------------------------------------------------| |---------------|
- * |Shif| <|End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| |
+ * |Shif| <|End| |PgD| | | | |End|PgD|Dow| | | 1| 2| 3| |
* `---------------------------------------------------------' |-----------|Ent|
- * |Opt|Mac | Space |Fn |Opt| | 0| .| |
+ * |Opt|Mac | Space |Fn | | | 0| .| |
* `-----------------------------------------------' `---------------'
*/
[1] = KEYMAP_INTL(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, ENT, P7, P8, P9, PMNS,
LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT,INS, P4, P5, P6, PPLS,
- LSFT,NO, END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT,
- LALT,LGUI, SPC, FN0, HOME,END, PGDN, P0, PDOT
+ LSFT,NO, END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, P1, P2, P3, PENT,
+ LALT,LGUI, SPC, FN0, P0, PDOT
),
};
diff --git a/converter/m0110_usb/keymap_plain.c b/converter/m0110_usb/keymap_plain.c
deleted file mode 100644
index d1507fcaa9..0000000000
--- a/converter/m0110_usb/keymap_plain.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
-Copyright 2014 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <stdint.h>
-#include "keycode.h"
-#include "keymap_common.h"
-
-
-const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* Default:
- * M0110 M0120
- * ,---------------------------------------------------------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *|
- * |---------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /|
- * |---------------------------------------------------------| |---------------|
- * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,|
- * |---------------------------------------------------------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
- * `---------------------------------------------------------' |-----------|Ent|
- * |Opt|Mac | Space |Mac |Opt| | 0| .| |
- * `-----------------------------------------------' `---------------'
- * M0110A
- * ,---------------------------------------------------------. ,---------------.
- * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Nlk| =| /| *|
- * |---------------------------------------------------------| |---------------|
- * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
- * |-----------------------------------------------------' | |---------------|
- * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
- * |---------------------------------------------------------| |---------------|
- * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
- * |---------------------------------------------------------' |-----------|Ent|
- * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
- * `---------------------------------------------------------' `---------------'
- */
- [0] = KEYMAP(
- GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,PEQL,PSLS,PAST,
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
- LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
- LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
- LALT,LGUI, SPC, RGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT
- ),
-};
-
-/*
- * Fn action definition
- */
-const uint16_t fn_actions[] PROGMEM = {
-};
-
-