diff options
| -rw-r--r-- | converter/pc98_usb/Makefile | 4 | ||||
| -rw-r--r-- | converter/pc98_usb/command_extra.c | 43 | ||||
| -rw-r--r-- | converter/pc98_usb/config.h | 125 | ||||
| -rw-r--r-- | converter/pc98_usb/matrix.c | 1 | ||||
| -rw-r--r-- | protocol/serial_uart.c | 93 |
5 files changed, 174 insertions, 92 deletions
diff --git a/converter/pc98_usb/Makefile b/converter/pc98_usb/Makefile index 076371dbfd..2575d86672 100644 --- a/converter/pc98_usb/Makefile +++ b/converter/pc98_usb/Makefile @@ -11,8 +11,8 @@ TARGET_DIR = . SRC = keymap.c \ matrix.c \ led.c \ - command_extra.c \ - protocol/serial_soft.c + protocol/serial_uart.c +# protocol/serial_soft.c CONFIG_H = config.h diff --git a/converter/pc98_usb/command_extra.c b/converter/pc98_usb/command_extra.c deleted file mode 100644 index 50389467ea..0000000000 --- a/converter/pc98_usb/command_extra.c +++ /dev/null @@ -1,43 +0,0 @@ -#include "stdbool.h" -#include "stdint.h" -#include "keycode.h" -#include "serial.h" -#include "print.h" -#include "command.h" - -bool command_extra(uint8_t code) -{ - switch (code) { - case KC_H: - case KC_SLASH: /* ? */ - print("\n\n----- Sun converter Help -----\n"); - print("UP: Bell On\n"); - print("DOWN: Bell Off\n"); - print("LEFT: Click On\n"); - print("RIGHT: Click Off\n"); - return false; - case KC_UP: - print("Bell On\n"); - serial_send(0x02); - break; - case KC_DOWN: - print("Bell Off\n"); - serial_send(0x03); - break; - case KC_LEFT: - print("Click On\n"); - serial_send(0x0A); - break; - case KC_RIGHT: - print("Click Off\n"); - serial_send(0x0B); - break; - case KC_NUMLOCK: - print("layout\n"); - serial_send(0x0F); - break; - default: - return false; - } - return true; -} diff --git a/converter/pc98_usb/config.h b/converter/pc98_usb/config.h index aa0476e3e8..04ee5b1101 100644 --- a/converter/pc98_usb/config.h +++ b/converter/pc98_usb/config.h @@ -27,27 +27,18 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* matrix size */ -#define MATRIX_ROWS 16 -#define MATRIX_COLS 8 +#define MATRIX_ROWS 16 +#define MATRIX_COLS 8 /* To use new keymap framework */ #define USE_KEYMAP_V2 /* key combination for command */ -#define IS_COMMAND() ( \ +#define IS_COMMAND() ( \ host_get_first_key() == KC_CANCEL \ ) -/* PC98 Serial(USART) configuration - * asynchronous, positive logic, 19200baud, bit order: LSB first - * 1-start bit, 8-data bit, odd parity, 1-stop bit - */ -#define SERIAL_BAUD 19200 -#define SERIAL_PARITY_ODD -#define SERIAL_BIT_ORDER_LSB -#define SERIAL_LOGIC_POSITIVE - /* PC98 Reset Port shared with TXD */ #define PC98_RST_DDR DDRD #define PC98_RST_PORT PORTD @@ -61,50 +52,92 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PC98_RTY_PORT PORTD #define PC98_RTY_BIT 5 +/* + * PC98 Serial(USART) configuration + * asynchronous, positive logic, 19200baud, bit order: LSB first + * 1-start bit, 8-data bit, odd parity, 1-stop bit + */ +/* + * Software Serial + */ +#define SERIAL_SOFT_BAUD 19200 +#define SERIAL_SOFT_PARITY_ODD +#define SERIAL_SOFT_BIT_ORDER_LSB +#define SERIAL_SOFT_LOGIC_POSITIVE /* RXD Port */ -#define SERIAL_RXD_DDR DDRD -#define SERIAL_RXD_PORT PORTD -#define SERIAL_RXD_PIN PIND -#define SERIAL_RXD_BIT 2 -#ifdef SERIAL_LOGIC_NEGATIVE -#define SERIAL_RXD_READ() ~(SERIAL_RXD_PIN&(1<<SERIAL_RXD_BIT)) +#define SERIAL_SOFT_RXD_DDR DDRD +#define SERIAL_SOFT_RXD_PORT PORTD +#define SERIAL_SOFT_RXD_PIN PIND +#define SERIAL_SOFT_RXD_BIT 2 +#ifdef SERIAL_SOFT_LOGIC_NEGATIVE + #define SERIAL_SOFT_RXD_READ() ~(SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) #else -#define SERIAL_RXD_READ() (SERIAL_RXD_PIN&(1<<SERIAL_RXD_BIT)) + #define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) #endif /* RXD Interupt */ -#define SERIAL_RXD_VECT INT2_vect -#define SERIAL_RXD_INIT() do { \ +#define SERIAL_SOFT_RXD_VECT INT2_vect +#define SERIAL_SOFT_RXD_INIT() do { \ /* pin configuration: input with pull-up */ \ - SERIAL_RXD_DDR &= ~(1<<SERIAL_RXD_BIT); \ - SERIAL_RXD_PORT |= (1<<SERIAL_RXD_BIT); \ - /* enable interrupt: INT2(falling edge) */ \ - EICRA |= ((1<<ISC21)|(0<<ISC20)); \ - EIMSK |= (1<<INT2); \ - sei(); \ + SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ + SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ + /* enable interrupt: INT2(falling edge) */ \ + EICRA |= ((1<<ISC21)|(0<<ISC20)); \ + EIMSK |= (1<<INT2); \ + sei(); \ } while (0) -#define SERIAL_RXD_INT_ENTER() -#define SERIAL_RXD_INT_EXIT() do { \ - /* clear interrupt flag */ \ - EIFR = (1<<INTF2); \ +#define SERIAL_SOFT_RXD_INT_ENTER() +#define SERIAL_SOFT_RXD_INT_EXIT() do { \ + /* clear interrupt flag */ \ + EIFR = (1<<INTF2); \ } while (0) - /* TXD Port */ -#define SERIAL_TXD_DDR DDRD -#define SERIAL_TXD_PORT PORTD -#define SERIAL_TXD_PIN PIND -#define SERIAL_TXD_BIT 3 -#ifdef SERIAL_LOGIC_NEGATIVE -#define SERIAL_TXD_ON() do { SERIAL_TXD_PORT &= ~(1<<SERIAL_TXD_BIT); } while (0) -#define SERIAL_TXD_OFF() do { SERIAL_TXD_PORT |= (1<<SERIAL_TXD_BIT); } while (0) +#define SERIAL_SOFT_TXD_DDR DDRD +#define SERIAL_SOFT_TXD_PORT PORTD +#define SERIAL_SOFT_TXD_PIN PIND +#define SERIAL_SOFT_TXD_BIT 3 +#ifdef SERIAL_SOFT_LOGIC_NEGATIVE + #define SERIAL_SOFT_TXD_ON() do { \ + SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); \ + } while (0) + #define SERIAL_SOFT_TXD_OFF() do { \ + SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); \ + } while (0) #else -#define SERIAL_TXD_ON() do { SERIAL_TXD_PORT |= (1<<SERIAL_TXD_BIT); } while (0) -#define SERIAL_TXD_OFF() do { SERIAL_TXD_PORT &= ~(1<<SERIAL_TXD_BIT); } while (0) + #define SERIAL_SOFT_TXD_ON() do { \ + SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); \ + } while (0) + #define SERIAL_SOFT_TXD_OFF() do { \ + SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); \ + } while (0) #endif -#define SERIAL_TXD_INIT() do { \ - /* pin configuration: output */ \ - SERIAL_TXD_DDR |= (1<<SERIAL_TXD_BIT); \ - /* idle */ \ - SERIAL_TXD_ON(); \ +#define SERIAL_SOFT_TXD_INIT() do { \ + /* pin configuration: output */ \ + SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \ + /* idle */ \ + SERIAL_SOFT_TXD_ON(); \ } while (0) + +/* + * Hardware Serial(UART) + */ +#ifdef __AVR_ATmega32U4__ + #define SERIAL_UART_BAUD 19200 + #define SERIAL_UART_DATA UDR1 + #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) + #define SERIAL_UART_RXD_VECT USART1_RX_vect + #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) + #define SERIAL_UART_INIT() do { \ + UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ + UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ + UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \ + UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \ + UCSR1C |= (1<<UPM11) | (1<<UPM10); /* parity: none(00), even(01), odd(11) */ \ + sei(); \ + } while(0) +#else + #error "USART configuration is needed." +#endif + + #endif diff --git a/converter/pc98_usb/matrix.c b/converter/pc98_usb/matrix.c index 18ad5bfe7c..d03aaf10d1 100644 --- a/converter/pc98_usb/matrix.c +++ b/converter/pc98_usb/matrix.c @@ -89,7 +89,6 @@ RETRY: while (!(code = serial_recv())) ; print("PC98: send 70: "); print_hex8(code); print("\n"); if (code != 0xFA) goto RETRY; - } void matrix_init(void) diff --git a/protocol/serial_uart.c b/protocol/serial_uart.c new file mode 100644 index 0000000000..6c0af88175 --- /dev/null +++ b/protocol/serial_uart.c @@ -0,0 +1,93 @@ +/* +Copyright 2013 Jun WAKO <wakojun@gmail.com> + +This software is licensed with a Modified BSD License. +All of this is supposed to be Free Software, Open Source, DFSG-free, +GPL-compatible, and OK to use in both free and proprietary applications. +Additions and corrections to this file are welcome. + + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + +* Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + +* Neither the name of the copyright holders nor the names of + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. +*/ + +#include <stdbool.h> +#include <avr/io.h> +#include <avr/interrupt.h> +#include "serial.h" + + +void serial_init(void) +{ + SERIAL_UART_INIT(); +} + +// RX ring buffer +#define RBUF_SIZE 8 +static uint8_t rbuf[RBUF_SIZE]; +static uint8_t rbuf_head = 0; +static uint8_t rbuf_tail = 0; + +uint8_t serial_recv(void) +{ + uint8_t data = 0; + if (rbuf_head == rbuf_tail) { + return 0; + } + + data = rbuf[rbuf_tail]; + rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; + return data; +} + +int16_t serial_recv2(void) +{ + uint8_t data = 0; + if (rbuf_head == rbuf_tail) { + return -1; + } + + data = rbuf[rbuf_tail]; + rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE; + return data; +} + +void serial_send(uint8_t data) +{ + while (!SERIAL_UART_TXD_READY) ; + SERIAL_UART_DATA = data; +} + +// USART RX complete interrupt +ISR(SERIAL_UART_RXD_VECT) +{ + uint8_t next = (rbuf_head + 1) % RBUF_SIZE; + if (next != rbuf_tail) { + rbuf[rbuf_head] = SERIAL_UART_DATA; + rbuf_head = next; + } +} |