diff options
| -rw-r--r-- | keyboards/southpole/config.h | 46 | ||||
| -rw-r--r-- | keyboards/southpole/keymaps/default/keymap.c | 26 | ||||
| -rw-r--r-- | keyboards/southpole/keymaps/foobeard/keymap.c | 72 | ||||
| -rw-r--r-- | keyboards/southpole/readme.md | 13 | ||||
| -rw-r--r-- | keyboards/southpole/rules.mk | 56 | ||||
| -rw-r--r-- | keyboards/southpole/southpole.c | 1 | ||||
| -rw-r--r-- | keyboards/southpole/southpole.h | 18 |
7 files changed, 232 insertions, 0 deletions
diff --git a/keyboards/southpole/config.h b/keyboards/southpole/config.h new file mode 100644 index 0000000000..5992a360f5 --- /dev/null +++ b/keyboards/southpole/config.h @@ -0,0 +1,46 @@ +#pragma once + +//#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER u/waxpoetic +#define PRODUCT southpole +#define DESCRIPTION southpaw keyboard, left hand numpad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 20 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D2, D3, C6, C7, D5 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, D4, E6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 0 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 0 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#endif
\ No newline at end of file diff --git a/keyboards/southpole/keymaps/default/keymap.c b/keyboards/southpole/keymaps/default/keymap.c new file mode 100644 index 0000000000..78cb81f4ba --- /dev/null +++ b/keyboards/southpole/keymaps/default/keymap.c @@ -0,0 +1,26 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_NLCK, KC_SLSH, KC_ASTR, KC_MINS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_HOME, \ + KC_7, KC_8, KC_9, KC_PLUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \ + KC_4, KC_5, KC_6, KC_ENT, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \ + KC_1, KC_2, KC_3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_END, \ + KC_0, KC_DOT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), \ + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, RESET, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ + ) + +}; + +void matrix_init_user(void) { +} + +void matrix_scan_user(void) { +} diff --git a/keyboards/southpole/keymaps/foobeard/keymap.c b/keyboards/southpole/keymaps/foobeard/keymap.c new file mode 100644 index 0000000000..ef2710d0a3 --- /dev/null +++ b/keyboards/southpole/keymaps/foobeard/keymap.c @@ -0,0 +1,72 @@ +/* +Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> +Modified 2017 Andrew Novak <ndrw.nvk@gmail.com> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public LicensezZZ +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _QWERTY, + _RAISE +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, +}; + +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Layer 0, default layer + * ,--------------------------------------------------------------------------------------------------------------------------------------------. + * |NumLck| / | * | - | | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ |Delete| Ins | + * |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------| + * | 7 | 8 | 9 | + | | Tab | Q | W | E | R | T | Y | U | I | O | P | { | } | BkSpc | Vol+ | + * |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------| + * | 4 | 5 | 6 | + | | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Return | Vol- | + * |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------| + * | 1 | 2 | 3 | En | | LShft | Z | X | C | V | B | N | M | , | . | / | RShft | Up | Mute | + * |------+------+------+------+-+----------------------------------------------------------------------------------------------+--------+------| + * | 0 | . | En | | Ctrl | Win | Alt | Space | Fn | | Left | Down | Right| + * `------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------' + */ + [_QWERTY] = LAYOUT( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DELETE, KC_INS, \ + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_VOLU, \ + KC_P4, KC_P5, KC_P6, KC_PENT, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_VOLD, \ + KC_P1, KC_P2, KC_P3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_MUTE, \ + KC_P0, KC_PDOT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + + /*layer 1, function layer + * ,--------------------------------------------------------------------------------------------------------------------------------------------. + * |Reset | | | | | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | |Calc | + * |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------| + * | | | | | | | | | | | | | | | | | | | | | + * |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------| + * | | | | | | | | | | | | | | | | | | | | + * |------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------| + * | | | | | | | | | | | | | | | | | | | | + * |------+------+------+------+-+----------------------------------------------------------------------------------------------+--------+------| + * | | | | | | | | | | | | | | + * `------+------+------+------+-+-------------------------------------------------------------------------------------------------------+------' + */ + + [_RAISE] = LAYOUT( + RESET, _______, _______, _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_CALC, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ) +};
\ No newline at end of file diff --git a/keyboards/southpole/readme.md b/keyboards/southpole/readme.md new file mode 100644 index 0000000000..4ea99ad349 --- /dev/null +++ b/keyboards/southpole/readme.md @@ -0,0 +1,13 @@ +# Southpole +[Southpole](https://imgur.com/a/MZ2wdYt) + +PCB designed by u/waxpoetic for a southpaw style board with an hhkb style layout. + +Keyboard Maintainer: ericduns +Hardware Supported: Teensy 2.0 + +Make example for this keyboard (after setting up your build environment): + + make southpole:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/southpole/rules.mk b/keyboards/southpole/rules.mk new file mode 100644 index 0000000000..356b75bb6c --- /dev/null +++ b/keyboards/southpole/rules.mk @@ -0,0 +1,56 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +#AUDIO_ENABLE = no +RGBLIGHT_ENABLE = no
\ No newline at end of file diff --git a/keyboards/southpole/southpole.c b/keyboards/southpole/southpole.c new file mode 100644 index 0000000000..f345893fb5 --- /dev/null +++ b/keyboards/southpole/southpole.c @@ -0,0 +1 @@ +#include "southpole.h" diff --git a/keyboards/southpole/southpole.h b/keyboards/southpole/southpole.h new file mode 100644 index 0000000000..99cf2ce7b5 --- /dev/null +++ b/keyboards/southpole/southpole.h @@ -0,0 +1,18 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K119, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K219, \ + K300, K301, K302, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K319, \ + K401, K402, K404, K405, K406, K409, K413, K415, K416, K419 \ +) \ + { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K018, K019 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, KC_NO, K119 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, KC_NO, KC_NO, K219 }, \ + { K300, K301, K302, KC_NO, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, KC_NO, KC_NO, K319 }, \ + { KC_NO, K401, K402, KC_NO, K404, K405, K406, KC_NO, KC_NO, K409, KC_NO, KC_NO, KC_NO, K413, KC_NO, K415, K416, KC_NO, KC_NO, K419 } \ +} |