diff options
401 files changed, 4275 insertions, 6459 deletions
diff --git a/build_test.mk b/build_test.mk index 136a0455f0..ec6699b4ea 100644 --- a/build_test.mk +++ b/build_test.mk @@ -43,6 +43,7 @@ all: elf VPATH += $(COMMON_VPATH) PLATFORM:=TEST PLATFORM_KEY:=test +BOOTLOADER_TYPE:=none ifeq ($(strip $(DEBUG)), 1) CONSOLE_ENABLE = yes diff --git a/builddefs/bootloader.mk b/builddefs/bootloader.mk index ccb92392d9..470febc346 100644 --- a/builddefs/bootloader.mk +++ b/builddefs/bootloader.mk @@ -30,6 +30,7 @@ # bootloadhid HIDBootFlash compatible (ATmega32A) # usbasploader USBaspLoader (ATmega328P) # ARM: +# halfkay PJRC Teensy # kiibohd Input:Club Kiibohd bootloader (only used on their boards) # stm32duino STM32Duino (STM32F103x8) # stm32-dfu STM32 USB DFU in ROM @@ -43,6 +44,8 @@ ifeq ($(strip $(BOOTLOADER)), atmel-dfu) OPT_DEFS += -DBOOTLOADER_ATMEL_DFU OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE = 4096 endif @@ -53,6 +56,8 @@ endif ifeq ($(strip $(BOOTLOADER)), lufa-dfu) OPT_DEFS += -DBOOTLOADER_LUFA_DFU OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE ?= 4096 endif @@ -63,6 +68,8 @@ endif ifeq ($(strip $(BOOTLOADER)), qmk-dfu) OPT_DEFS += -DBOOTLOADER_QMK_DFU OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE ?= 4096 endif @@ -73,10 +80,14 @@ endif ifeq ($(strip $(BOOTLOADER)), qmk-hid) OPT_DEFS += -DBOOTLOADER_QMK_HID OPT_DEFS += -DBOOTLOADER_HID + BOOTLOADER_TYPE = dfu + BOOTLOADER_SIZE ?= 4096 endif ifeq ($(strip $(BOOTLOADER)), halfkay) OPT_DEFS += -DBOOTLOADER_HALFKAY + BOOTLOADER_TYPE = halfkay + ifeq ($(strip $(MCU)), atmega32u4) BOOTLOADER_SIZE = 512 endif @@ -86,18 +97,26 @@ ifeq ($(strip $(BOOTLOADER)), halfkay) endif ifeq ($(strip $(BOOTLOADER)), caterina) OPT_DEFS += -DBOOTLOADER_CATERINA + BOOTLOADER_TYPE = caterina + BOOTLOADER_SIZE = 4096 endif ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID)) OPT_DEFS += -DBOOTLOADER_BOOTLOADHID + BOOTLOADER_TYPE = bootloadhid + BOOTLOADER_SIZE = 4096 endif ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp)) OPT_DEFS += -DBOOTLOADER_USBASP + BOOTLOADER_TYPE = usbasploader + BOOTLOADER_SIZE = 4096 endif ifeq ($(strip $(BOOTLOADER)), lufa-ms) OPT_DEFS += -DBOOTLOADER_MS + BOOTLOADER_TYPE = dfu + BOOTLOADER_SIZE ?= 8192 FIRMWARE_FORMAT = bin cpfirmware: lufa_warning @@ -115,6 +134,7 @@ endif ifeq ($(strip $(BOOTLOADER)), stm32-dfu) OPT_DEFS += -DBOOTLOADER_STM32_DFU + BOOTLOADER_TYPE = stm32_dfu # Options to pass to dfu-util when flashing DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave @@ -122,6 +142,7 @@ ifeq ($(strip $(BOOTLOADER)), stm32-dfu) endif ifeq ($(strip $(BOOTLOADER)), apm32-dfu) OPT_DEFS += -DBOOTLOADER_APM32_DFU + BOOTLOADER_TYPE = stm32_dfu # Options to pass to dfu-util when flashing DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave @@ -129,6 +150,7 @@ ifeq ($(strip $(BOOTLOADER)), apm32-dfu) endif ifeq ($(strip $(BOOTLOADER)), gd32v-dfu) OPT_DEFS += -DBOOTLOADER_GD32V_DFU + BOOTLOADER_TYPE = gd32v_dfu # Options to pass to dfu-util when flashing DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave @@ -136,6 +158,8 @@ ifeq ($(strip $(BOOTLOADER)), gd32v-dfu) endif ifeq ($(strip $(BOOTLOADER)), kiibohd) OPT_DEFS += -DBOOTLOADER_KIIBOHD + BOOTLOADER_TYPE = kiibohd + ifeq ($(strip $(MCU_ORIG)), MK20DX128) MCU_LDSCRIPT = MK20DX128BLDR4 endif @@ -151,8 +175,7 @@ ifeq ($(strip $(BOOTLOADER)), stm32duino) OPT_DEFS += -DBOOTLOADER_STM32DUINO MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader BOARD = STM32_F103_STM32DUINO - # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense - STM32_BOOTLOADER_ADDRESS = 0x80000000 + BOOTLOADER_TYPE = stm32duino # Options to pass to dfu-util when flashing DFU_ARGS = -d 1EAF:0003 -a 2 -R @@ -160,4 +183,17 @@ ifeq ($(strip $(BOOTLOADER)), stm32duino) endif ifeq ($(strip $(BOOTLOADER)), tinyuf2) OPT_DEFS += -DBOOTLOADER_TINYUF2 + BOOTLOADER_TYPE = tinyuf2 +endif +ifeq ($(strip $(BOOTLOADER)), halfkay) + OPT_DEFS += -DBOOTLOADER_HALFKAY + BOOTLOADER_TYPE = halfkay +endif +ifeq ($(strip $(BOOTLOADER)), md-boot) + OPT_DEFS += -DBOOTLOADER_MD_BOOT + BOOTLOADER_TYPE = md_boot +endif + +ifeq ($(strip $(BOOTLOADER_TYPE)),) + BOOTLOADER_TYPE = none endif diff --git a/builddefs/message.mk b/builddefs/message.mk index cb4ef43719..1187491452 100644 --- a/builddefs/message.mk +++ b/builddefs/message.mk @@ -87,6 +87,7 @@ define GENERATE_MSG_AVAILABLE_KEYMAPS endef MSG_AVAILABLE_KEYMAPS = $(eval $(call GENERATE_MSG_AVAILABLE_KEYMAPS))$(MSG_AVAILABLE_KEYMAPS_ACTUAL) +MSG_BOOTLOADER_NOT_FOUND_BASE = Bootloader not found. Make sure the board is in bootloader mode. See https://docs.qmk.fm/\#/newbs_flashing\n MSG_CHECK_FILESIZE = Checking file size of $(TARGET).$(FIRMWARE_FORMAT) MSG_CHECK_FILESIZE_SKIPPED = (Firmware size check does not yet support $(MCU_ORIG); skipping) MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE) ($(OVER_SIZE) bytes over)\n @@ -97,6 +98,6 @@ MSG_PYTHON_MISSING = $(ERROR_COLOR)ERROR:$(NO_COLOR) Cannot run \"qmk hello\"!\n Please run $(BOLD)qmk setup$(NO_COLOR) to install all the dependencies QMK requires.\n\n MSG_FLASH_BOOTLOADER = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's bootloader is not specified or is not supported by the \":flash\" target at this time.\n\n MSG_FLASH_ARCH = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's architecture is not supported by the \":flash\" target at this time.\n\n -MSG_BOOTLOADER_NOT_FOUND = $(ERROR_COLOR)ERROR:$(NO_COLOR) Bootloader not found. Trying again in 5s (Ctrl+C to cancel)\n +MSG_BOOTLOADER_NOT_FOUND = $(ERROR_COLOR)ERROR:$(NO_COLOR) $(MSG_BOOTLOADER_NOT_FOUND_BASE) Trying again in 5s (Ctrl+C to cancel)\n BOOTLOADER_RETRY_TIME ?= 0.5 -MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY = Bootloader not found. Trying again every $(BOOTLOADER_RETRY_TIME)s (Ctrl+C to cancel) +MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY = $(MSG_BOOTLOADER_NOT_FOUND_BASE) Trying again every $(BOOTLOADER_RETRY_TIME)s (Ctrl+C to cancel) diff --git a/common_features.mk b/common_features.mk index 8c593024f0..5cde023d10 100644 --- a/common_features.mk +++ b/common_features.mk @@ -356,7 +356,7 @@ endif ifeq ($(strip $(PRINTING_ENABLE)), yes) OPT_DEFS += -DPRINTING_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c - SRC += $(TMK_DIR)/protocol/serial_uart.c + QUANTUM_LIB_SRC += uart.c endif VARIABLE_TRACE ?= no @@ -604,6 +604,7 @@ ifeq ($(strip $(UNICODE_ENABLE)), yes) endif ifeq ($(strip $(UNICODE_COMMON)), yes) + OPT_DEFS += -DUNICODE_COMMON_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c endif @@ -719,6 +720,7 @@ ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) ifeq ($(strip $(BLUETOOTH_DRIVER)), RN42) OPT_DEFS += -DMODULE_RN42 - SRC += $(TMK_DIR)/protocol/serial_uart.c + SRC += $(DRIVER_PATH)/bluetooth/rn42.c + QUANTUM_LIB_SRC += uart.c endif endif diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 308f9b782b..94bbbe7e85 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -57,7 +57,7 @@ }, "bootloader": { "type": "string", - "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"], + "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "md-boot", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"], }, "bootloader_instructions": { "type": "string", @@ -69,7 +69,7 @@ "properties": { "debounce_type": { "type": "string", - "enum": ["custom", "eager_pk", "eager_pr", "sym_defer_pk", "sym_eager_pk"] + "enum": ["custom", "eager_pk", "eager_pr", "sym_defer_pk", "sym_defer_pr", "sym_eager_pk"] }, "firmware_format": { "type": "string", diff --git a/docs/ChangeLog/20220226/PR15304.md b/docs/ChangeLog/20220226/PR15304.md new file mode 100644 index 0000000000..3cdb40db10 --- /dev/null +++ b/docs/ChangeLog/20220226/PR15304.md @@ -0,0 +1,13 @@ +### Split Common core now supports Pointing Devices ([#15304](https://github.com/qmk/qmk_firmware/pull/15304)) + +Pointing devices can now be shared across a split keyboard with support for a single pointing device or a pointing device on each side. + +This feature can be enabled with `#define SPLIT_POINTING_ENABLE` and one of the following options: + +| Setting | Description | +|---------------------------|------------------------------------| +|`POINTING_DEVICE_LEFT` | Pointing device on the left side | +|`POINTING_DEVICE_RIGHT` | Pointing device on the right side | +|`POINTING_DEVICE_COMBINED` | Pointing device on both sides | + +See the [Pointing Device](../feature_pointing_device.md) documentation for further configuration options. diff --git a/docs/feature_debounce_type.md b/docs/feature_debounce_type.md index f37a785b1e..9cd736a24a 100644 --- a/docs/feature_debounce_type.md +++ b/docs/feature_debounce_type.md @@ -116,6 +116,7 @@ Where name of algorithm is one of: For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use. * ```sym_eager_pk``` - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key +* ```sym_defer_pr``` - debouncing per row. On any state change, a per-row timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that row, the entire row is pushed. Can improve responsiveness over `sym_defer_g` while being less susceptible than per-key debouncers to noise. * ```sym_defer_pk``` - debouncing per key. On any state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key status change is pushed. * ```asym_eager_defer_pk``` - debouncing per key. On a key-down state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key. On a key-up state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key-up status change is pushed. diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index c8c74cb8f0..bbdf7e122c 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -167,7 +167,7 @@ List of waveform sequences from the datasheet: ``` #define DRV_GREETING *sequence name or number* ``` -If haptic feedback is enabled, the keyboard will vibrate to a specific sqeuence during startup. That can be selected using the following define: +If haptic feedback is enabled, the keyboard will vibrate to a specific sequence during startup. That can be selected using the following define: ``` #define DRV_MODE_DEFAULT *sequence name or number* @@ -207,4 +207,4 @@ With the entry of `#define NO_HAPTIC_LOCKKEYS` in config.h, none of the followin With the entry of `#define NO_HAPTIC_NAV` in config.h, none of the following keys will trigger a feedback: Print Screen, Pause, Insert, Delete, Page Down, Page Up, Left Arrow, Up Arrow, Right Arrow, Down Arrow, End, Home. ### NO_HAPTIC_NUMERIC -With the entry of `#define NO_HAPTIC_NUMERIC` in config.h, none of the following keys between 0 and 9 (KC_1 ... KC_0) will trigger a feedback.
\ No newline at end of file +With the entry of `#define NO_HAPTIC_NUMERIC` in config.h, none of the following keys between 0 and 9 (KC_1 ... KC_0) will trigger a feedback. diff --git a/docs/feature_key_lock.md b/docs/feature_key_lock.md index 8e6e29f0e6..7681394229 100644 --- a/docs/feature_key_lock.md +++ b/docs/feature_key_lock.md @@ -19,4 +19,5 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th Key Lock is only able to hold standard action keys and [One Shot modifier](one_shot_keys.md) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`). This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held. -Switching layers will not cancel the Key Lock. +Switching layers will not cancel the Key Lock. The Key Lock can be cancelled by calling the `cancel_key_lock()` function. + diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index bd7fb36589..f8de92f3b4 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -30,7 +30,7 @@ The ADNS 5050 sensor uses a serial type protocol for communication, and requires The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI. -### ADSN 9800 Sensor +### ADNS 9800 Sensor To use the ADNS 9800 sensor, add this to your `rules.mk` @@ -69,7 +69,7 @@ The Analog Joystick is an analog (ADC) driven sensor. There are a variety of jo |`ANALOG_JOYSTICK_AXIS_MAX` | (Optional) Sets the upper range to be considered movement. | `1023` | |`ANALOG_JOYSTICK_SPEED_REGULATOR` | (Optional) The divisor used to slow down movement. (lower makes it faster) | `20` | |`ANALOG_JOYSTICK_READ_INTERVAL` | (Optional) The interval in milliseconds between reads. | `10` | -|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maxiumum value used for motion. | `2` | +|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maximum value used for motion. | `2` | |`ANALOG_JOYSTICK_CLICK_PIN` | (Optional) The pin wired up to the press switch of the analog stick. | _not defined_ | @@ -127,11 +127,10 @@ The Pimoroni Trackball module is a I2C based breakout board with an RGB enable t | Setting | Description | Default | |-------------------------------------|------------------------------------------------------------------------------------|---------| |`PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` | -|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `100` | -|`PIMORONI_TRACKBALL_INTERVAL_MS` | (Optional) The update/read interval for the sensor in milliseconds. | `8` | +|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackball in milliseconds. | `100` | |`PIMORONI_TRACKBALL_SCALE` | (Optional) The multiplier used to generate reports from the sensor. | `5` | |`PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` | -|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | +|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | ### PMW 3360 Sensor @@ -171,14 +170,35 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} ## Common Configuration -| Setting | Description | Default | -|-------------------------------|-----------------------------------------------------------------------|---------------| -|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | -|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | -|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | -|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | +| Setting | Description | Default | +|----------------------------------|-----------------------------------------------------------------------|-------------------| +|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | +|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | +|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | +|`POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ | + +!> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and would recommend `POINTING_DEVICE_TASK_THROTTLE_MS` be set to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness. + + +## Split Keyboard Configuration + +The following configuration options are only available when using `SPLIT_POINTING_ENABLE` see [data sync options](feature_split_keyboard.md?id=data-sync-options). The rotation and invert `*_RIGHT` options are only used with `POINTING_DEVICE_COMBINED`. If using `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` use the common configuration above to configure your pointing device. + +| Setting | Description | Default | +|----------------------------------------|-----------------------------------------------------------------------|---------------| +|`POINTING_DEVICE_LEFT` | Pointing device on the left side (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_RIGHT` | Pointing device on the right side (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_COMBINED` | Pointing device on both sides (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_ROTATION_90_RIGHT` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_180_RIGHT` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_270_RIGHT` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +|`POINTING_DEVICE_INVERT_X_RIGHT` | (Optional) Inverts the X axis report. | _not defined_ | +|`POINTING_DEVICE_INVERT_Y_RIGHT` | (Optional) Inverts the Y axis report. | _not defined_ | + +!> If there is a `_RIGHT` configuration option or callback, the [common configuration](feature_pointing_device.md?id=common-configuration) option will work for the left. For correct left/right detection you should setup a [handedness option](feature_split_keyboard?id=setting-handedness), `EE_HANDS` is usually a good option for an existing board that doesn't do handedness by hardware. ## Callbacks and Functions @@ -188,7 +208,7 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} | `pointing_device_init_kb(void)` | Callback to allow for keyboard level initialization. Useful for additional hardware sensors. | | `pointing_device_init_user(void)` | Callback to allow for user level initialization. Useful for additional hardware sensors. | | `pointing_device_task_kb(mouse_report)` | Callback that sends sensor data, so keyboard code can intercept and modify the data. Returns a mouse report. | -| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user coe can intercept and modify the data. Returns a mouse report. | +| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user code can intercept and modify the data. Returns a mouse report. | | `pointing_device_handle_buttons(buttons, pressed, button)` | Callback to handle hardware button presses. Returns a `uint8_t`. | | `pointing_device_get_cpi(void)` | Gets the current CPI/DPI setting from the sensor, if supported. | | `pointing_device_set_cpi(uint16_t)` | Sets the CPI/DPI, if supported. | @@ -196,6 +216,21 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} | `pointing_device_set_report(mouse_report)` | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function. | | `pointing_device_send(void)` | Sends the current mouse report to the host system. Function can be replaced. | | `has_mouse_report_changed(old, new)` | Compares the old and new `mouse_report_t` data and returns true only if it has changed. | +| `pointing_device_adjust_by_defines(mouse_report)` | Applies rotations and invert configurations to a raw mouse report. | + + +## Split Keyboard Callbacks and Functions + +The combined functions below are only available when using `SPLIT_POINTING_ENABLE` and `POINTING_DEVICE_COMBINED`. The 2 callbacks `pointing_device_task_combined_*` replace the single sided equivalents above. See the [combined pointing devices example](feature_pointing_device.md?id=combined-pointing-devices) + +| Function | Description | +|-----------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------| +| `pointing_device_set_shared_report(mouse_report)` | Sets the shared mouse report to the assigned `mouse_report_t` data structured passed to the function. | +| `pointing_device_set_cpi_on_side(bool, uint16_t)` | Sets the CPI/DPI of one side, if supported. Passing `true` will set the left and `false` the right` | +| `pointing_device_combine_reports(left_report, right_report)` | Returns a combined mouse_report of left_report and right_report (as a `mouse_report_t` data structure) | +| `pointing_device_task_combined_kb(left_report, right_report)` | Callback, so keyboard code can intercept and modify the data. Returns a combined mouse report. | +| `pointing_device_task_combined_user(left_report, right_report)` | Callback, so user code can intercept and modify. Returns a combined mouse report using `pointing_device_combine_reports` | +| `pointing_device_adjust_by_defines_right(mouse_report)` | Applies right side rotations and invert configurations to a raw mouse report. | # Manipulating Mouse Reports @@ -242,3 +277,62 @@ case MS_SPECIAL: ``` Recall that the mouse report is set to zero (except the buttons) whenever it is sent, so the scrolling would only occur once in each case. + +## Split Examples + +The following examples make use the `SPLIT_POINTING_ENABLE` functionality and show how to manipulate the mouse report for a scrolling mode. + +### Single Pointing Device + +The following example will work with either `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` and enables scrolling mode while on a particular layer. + +```c + +static bool scrolling_mode = false; + +layer_state_t layer_state_set_user(layer_state_t state) { + switch (get_highest_layer(state)) { + case _RAISE: // If we're on the _RAISE layer enable scrolling mode + scrolling_mode = true; + pointing_device_set_cpi(2000); + break; + default: + if (scrolling_mode) { // check if we were scrolling before and set disable if so + scrolling_mode = false; + pointing_device_set_cpi(8000); + } + break; + } + return state; +} + +report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { + if (scrolling_mode) { + mouse_report.h = mouse_report.x; + mouse_report.v = mouse_report.y; + mouse_report.x = 0; + mouse_report.y = 0; + } + return mouse_report; +} + +``` + +### Combined Pointing Devices + +The following example requires `POINTING_DEVICE_COMBINED` and sets the left side pointing device to scroll only. + +```c +void keyboard_post_init_user(void) { + pointing_device_set_cpi_on_side(true, 1000); //Set cpi on left side to a low value for slower scrolling. + pointing_device_set_cpi_on_side(false, 8000); //Set cpi on right side to a reasonable value for mousing. +} + +report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) { + left_report.h = left_report.x; + left_report.v = left_report.y; + left_report.x = 0; + left_report.y = 0; + return pointing_device_combine_reports(left_report, right_report); +} +``` diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index c8ba18beeb..b51593308e 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -266,6 +266,14 @@ This enables transmitting the current OLED on/off status to the slave side of th This enables transmitting the current ST7565 on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing. +```c +#define SPLIT_POINTING_ENABLE +``` + +This enables transmitting the pointing device status to the master side of the split keyboard. The purpose of this feature is to enable use pointing devices on the slave side. + +!> There is additional required configuration for `SPLIT_POINTING_ENABLE` outlined in the [pointing device documentation](feature_pointing_device.md?id=split-keyboard-configuration). + ### Custom data sync between sides :id=custom-data-sync QMK's split transport allows for arbitrary data transactions at both the keyboard and user levels. This is modelled on a remote procedure call, with the master invoking a function on the slave side, with the ability to send data from master to slave, process it slave side, and send data back from slave to master. diff --git a/docs/feature_wpm.md b/docs/feature_wpm.md index 87145c97e3..9f98ef8336 100644 --- a/docs/feature_wpm.md +++ b/docs/feature_wpm.md @@ -16,7 +16,7 @@ For split keyboards using soft serial, the computed WPM score will be available | `WPM_ALLOW_COUNT_REGRESSION` | _Not defined_ | If defined allows the WPM to be decreased when hitting Delete or Backspace | | `WPM_UNFILTERED` | _Not defined_ | If undefined (the default), WPM values will be smoothed to avoid sudden changes in value | | `WPM_SAMPLE_SECONDS` | `5` | This defines how many seconds of typing to average, when calculating WPM | -| `WPM_SAMPLE_PERIODS` | `50` | This defines how many sampling periods to use when calculating WPM | +| `WPM_SAMPLE_PERIODS` | `25` | This defines how many sampling periods to use when calculating WPM | | `WPM_LAUNCH_CONTROL` | _Not defined_ | If defined, WPM values will be calculated using partial buffers when typing begins | 'WPM_UNFILTERED' is potentially useful if you're filtering data in some other way (and also because it reduces the code required for the WPM feature), or if reducing measurement latency to a minimum is important for you. diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md index ccd3f8c74d..e1f1515b71 100644 --- a/docs/internals_gpio_control.md +++ b/docs/internals_gpio_control.md @@ -6,17 +6,19 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This The following functions provide basic control of GPIOs and are found in `platforms/<platform>/gpio.h`. -|Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples | -|------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------| -| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` | -| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` | -| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` | -| `setPinOutput(pin)` | Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` | -| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` | -| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` | -| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` | -| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` | -| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` | +| Function | Description | Old AVR Examples | Old ChibiOS/ARM Examples | +|------------------------------|-----------------------------------------------------|-------------------------------------------------|--------------------------------------------------| +| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` | +| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` | +| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` | +| `setPinOutput(pin)` | Set pin as output (alias of `setPinOutputPushPull`) | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` | +| `setPinOutputPushPull(pin)` | Set pin as output, push/pull mode | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` | +| `setPinOutputOpenDrain(pin)` | Set pin as output, open-drain mode | N/A (Not implemented on AVR) | `palSetLineMode(pin, PAL_MODE_OUTPUT_OPENDRAIN)` | +| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` | +| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` | +| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` | +| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` | +| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` | ## Advanced Settings :id=advanced-settings diff --git a/docs/keycodes.md b/docs/keycodes.md index ba06e1b8b6..2ea4fc74e2 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -326,6 +326,7 @@ See also: [Magic Keycodes](keycodes_magic.md) |----------------------------------|---------|--------------------------------------------------------------------------| |`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control | |`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control | +|`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap | |`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control | |`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control | |`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI | diff --git a/docs/keycodes_magic.md b/docs/keycodes_magic.md index 7e1b1a4f62..01eb69168e 100644 --- a/docs/keycodes_magic.md +++ b/docs/keycodes_magic.md @@ -6,6 +6,7 @@ |----------------------------------|---------|--------------------------------------------------------------------------| |`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control | |`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control | +|`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap | |`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control | |`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control | |`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI | diff --git a/drivers/bluetooth/rn42.c b/drivers/bluetooth/rn42.c new file mode 100644 index 0000000000..2ef40bb7e0 --- /dev/null +++ b/drivers/bluetooth/rn42.c @@ -0,0 +1,99 @@ +/* Copyright 2021 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "report.h" +#include "uart.h" + +#ifndef RN42_BAUD_RATE +# define RN42_BAUD_RATE 115200 +#endif + +// https://cdn.sparkfun.com/datasheets/Wireless/Bluetooth/bluetooth_cr_UG-v1.0r.pdf#G7.663734 +static inline uint16_t rn42_consumer_usage_to_bitmap(uint16_t usage) { + switch (usage) { + case AC_HOME: + return 0x0001; + case AL_EMAIL: + return 0x0002; + case AC_SEARCH: + return 0x0004; + case AL_KEYBOARD_LAYOUT: + return 0x0008; + case AUDIO_VOL_UP: + return 0x0010; + case AUDIO_VOL_DOWN: + return 0x0020; + case AUDIO_MUTE: + return 0x0040; + case TRANSPORT_PLAY_PAUSE: + return 0x0080; + case TRANSPORT_NEXT_TRACK: + return 0x0100; + case TRANSPORT_PREV_TRACK: + return 0x0200; + case TRANSPORT_STOP: + return 0x0400; + case TRANSPORT_EJECT: + return 0x0800; + case TRANSPORT_FAST_FORWARD: + return 0x1000; + case TRANSPORT_REWIND: + return 0x2000; + case TRANSPORT_STOP_EJECT: + return 0x4000; + case AL_LOCAL_BROWSER: + return 0x8000; + default: + return 0; + } +} + +void rn42_init(void) { uart_init(RN42_BAUD_RATE); } + +void rn42_send_keyboard(report_keyboard_t *report) { + uart_write(0xFD); + uart_write(0x09); + uart_write(0x01); + uart_write(report->mods); + uart_write(0x00); + for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { + uart_write(report->keys[i]); + } +} + +void rn42_send_mouse(report_mouse_t *report) { + uart_write(0xFD); + uart_write(0x00); + uart_write(0x03); + uart_write(report->buttons); + uart_write(report->x); + uart_write(report->y); + uart_write(report->v); // should try sending the wheel v here + uart_write(report->h); // should try sending the wheel h here + uart_write(0x00); +} + +void rn42_send_consumer(uint16_t data) { + static uint16_t last_data = 0; + if (data == last_data) return; + last_data = data; + uint16_t bitmap = rn42_consumer_usage_to_bitmap(data); + uart_write(0xFD); + uart_write(0x03); + uart_write(0x03); + uart_write(bitmap & 0xFF); + uart_write((bitmap >> 8) & 0xFF); +} diff --git a/drivers/bluetooth/rn42.h b/drivers/bluetooth/rn42.h new file mode 100644 index 0000000000..4747759111 --- /dev/null +++ b/drivers/bluetooth/rn42.h @@ -0,0 +1,25 @@ +/* Copyright 2021 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "report.h" + +void rn42_init(void); + +void rn42_send_keyboard(report_keyboard_t *report); + +void rn42_send_mouse(report_mouse_t *report); + +void rn42_send_consumer(uint16_t data); diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index c52f991804..425cf9912f 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -154,8 +154,8 @@ void adns9800_init() { } config_adns9800_t adns9800_get_config(void) { - uint8_t config_1 = adns9800_read(REG_Configuration_I); - return (config_adns9800_t){(config_1 & 0xFF) * CPI_STEP}; + uint8_t cpival = adns9800_read(REG_Configuration_I); + return (config_adns9800_t){(cpival & 0xFF) * CPI_STEP}; } void adns9800_set_config(config_adns9800_t config) { @@ -164,8 +164,8 @@ void adns9800_set_config(config_adns9800_t config) { } uint16_t adns9800_get_cpi(void) { - uint8_t config_1 = adns9800_read(REG_Configuration_I); - return (uint16_t){(config_1 & 0xFF) * CPI_STEP}; + uint8_t cpival = adns9800_read(REG_Configuration_I); + return (uint16_t)(cpival & 0xFF) * CPI_STEP; } void adns9800_set_cpi(uint16_t cpi) { @@ -184,7 +184,7 @@ static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { } report_adns9800_t adns9800_get_report(void) { - report_adns9800_t report = {0, 0}; + report_adns9800_t report = {0}; adns9800_spi_start(); diff --git a/drivers/sensors/pimoroni_trackball.c b/drivers/sensors/pimoroni_trackball.c index 7d390056ea..2867e763bc 100644 --- a/drivers/sensors/pimoroni_trackball.c +++ b/drivers/sensors/pimoroni_trackball.c @@ -33,8 +33,24 @@ static uint16_t precision = 128; -float pimoroni_trackball_get_precision(void) { return ((float)precision / 128); } -void pimoroni_trackball_set_precision(float floatprecision) { precision = (floatprecision * 128); } +uint16_t pimoroni_trackball_get_cpi(void) { return (precision * 125); } +/** + * @brief Sets the scaling value for pimoroni trackball + * + * Sets a scaling value for pimoroni trackball to allow runtime adjustment. This isn't used by the sensor and is an + * approximation so the functions are consistent across drivers. + * + * NOTE: This rounds down to the nearest number divisable by 125 that's a positive integer, values below 125 are clamped to 125. + * + * @param cpi uint16_t + */ +void pimoroni_trackball_set_cpi(uint16_t cpi) { + if (cpi < 249) { + precision = 1; + } else { + precision = (cpi - (cpi % 125)) / 125; + } +} void pimoroni_trackball_set_rgbw(uint8_t r, uint8_t g, uint8_t b, uint8_t w) { uint8_t data[4] = {r, g, b, w}; @@ -60,7 +76,7 @@ i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data) { return status; } -__attribute__((weak)) void pimironi_trackball_device_init(void) { +__attribute__((weak)) void pimoroni_trackball_device_init(void) { i2c_init(); pimoroni_trackball_set_rgbw(0x00, 0x00, 0x00, 0x00); } diff --git a/drivers/sensors/pimoroni_trackball.h b/drivers/sensors/pimoroni_trackball.h index 59ee8724ba..e20ee748a7 100644 --- a/drivers/sensors/pimoroni_trackball.h +++ b/drivers/sensors/pimoroni_trackball.h @@ -23,9 +23,6 @@ #ifndef PIMORONI_TRACKBALL_ADDRESS # define PIMORONI_TRACKBALL_ADDRESS 0x0A #endif -#ifndef PIMORONI_TRACKBALL_INTERVAL_MS -# define PIMORONI_TRACKBALL_INTERVAL_MS 8 -#endif #ifndef PIMORONI_TRACKBALL_SCALE # define PIMORONI_TRACKBALL_SCALE 5 #endif @@ -52,10 +49,10 @@ typedef struct { uint8_t click; } pimoroni_data_t; -void pimironi_trackball_device_init(void); +void pimoroni_trackball_device_init(void); void pimoroni_trackball_set_rgbw(uint8_t red, uint8_t green, uint8_t blue, uint8_t white); int16_t pimoroni_trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_t scale); void pimoroni_trackball_adapt_values(int8_t* mouse, int16_t* offset); -float pimoroni_trackball_get_precision(void); -void pimoroni_trackball_set_precision(float precision); +uint16_t pimoroni_trackball_get_cpi(void); +void pimoroni_trackball_set_cpi(uint16_t cpi); i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data); diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 50d1c35801..4854ba5f47 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -16,6 +16,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "spi_master.h" #include "pmw3360.h" #include "wait.h" #include "debug.h" @@ -24,55 +25,57 @@ // Registers // clang-format off -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Raw_Data_Sum 0x08 -#define REG_Maximum_Raw_data 0x09 -#define REG_Minimum_Raw_data 0x0A -#define REG_Shutter_Lower 0x0B -#define REG_Shutter_Upper 0x0C -#define REG_Control 0x0D -#define REG_Config1 0x0F -#define REG_Config2 0x10 -#define REG_Angle_Tune 0x11 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate_Lower 0x15 -#define REG_Rest1_Rate_Upper 0x16 -#define REG_Rest1_Downshift 0x17 -#define REG_Rest2_Rate_Lower 0x18 -#define REG_Rest2_Rate_Upper 0x19 -#define REG_Rest2_Downshift 0x1A -#define REG_Rest3_Rate_Lower 0x1B -#define REG_Rest3_Rate_Upper 0x1C -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_Raw_Data_Dump 0x29 -#define REG_SROM_ID 0x2A -#define REG_Min_SQ_Run 0x2B -#define REG_Raw_Data_Threshold 0x2C -#define REG_Config5 0x2F -#define REG_Power_Up_Reset 0x3A -#define REG_Shutdown 0x3B -#define REG_Inverse_Product_ID 0x3F -#define REG_LiftCutoff_Tune3 0x41 -#define REG_Angle_Snap 0x42 -#define REG_LiftCutoff_Tune1 0x4A -#define REG_Motion_Burst 0x50 -#define REG_LiftCutoff_Tune_Timeout 0x58 -#define REG_LiftCutoff_Tune_Min_Length 0x5A -#define REG_SROM_Load_Burst 0x62 -#define REG_Lift_Config 0x63 -#define REG_Raw_Data_Burst 0x64 -#define REG_LiftCutoff_Tune2 0x65 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Raw_Data_Sum 0x08 +#define REG_Maximum_Raw_data 0x09 +#define REG_Minimum_Raw_data 0x0a +#define REG_Shutter_Lower 0x0b +#define REG_Shutter_Upper 0x0c +#define REG_Control 0x0d +#define REG_Config1 0x0f +#define REG_Config2 0x10 +#define REG_Angle_Tune 0x11 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate_Lower 0x15 +#define REG_Rest1_Rate_Upper 0x16 +#define REG_Rest1_Downshift 0x17 +#define REG_Rest2_Rate_Lower 0x18 +#define REG_Rest2_Rate_Upper 0x19 +#define REG_Rest2_Downshift 0x1a +#define REG_Rest3_Rate_Lower 0x1b +#define REG_Rest3_Rate_Upper 0x1c +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_Raw_Data_Dump 0x29 +#define REG_SROM_ID 0x2a +#define REG_Min_SQ_Run 0x2b +#define REG_Raw_Data_Threshold 0x2c +#define REG_Config5 0x2f +#define REG_Power_Up_Reset 0x3a +#define REG_Shutdown 0x3b +#define REG_Inverse_Product_ID 0x3f +#define REG_LiftCutoff_Tune3 0x41 +#define REG_Angle_Snap 0x42 +#define REG_LiftCutoff_Tune1 0x4a +#define REG_Motion_Burst 0x50 +#define REG_LiftCutoff_Tune_Timeout 0x58 +#define REG_LiftCutoff_Tune_Min_Length 0x5a +#define REG_SROM_Load_Burst 0x62 +#define REG_Lift_Config 0x63 +#define REG_Raw_Data_Burst 0x64 +#define REG_LiftCutoff_Tune2 0x65 + +#define CPI_STEP 100 // clang-format on #ifndef MAX_CPI @@ -86,41 +89,36 @@ void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' #endif #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) -bool spi_start_adv(void) { +bool pmw3360_spi_start(void) { bool status = spi_start(PMW3360_CS_PIN, PMW3360_SPI_LSBFIRST, PMW3360_SPI_MODE, PMW3360_SPI_DIVISOR); wait_us(1); return status; } -void spi_stop_adv(void) { - wait_us(1); - spi_stop(); -} +spi_status_t pmw3360_write(uint8_t reg_addr, uint8_t data) { + pmw3360_spi_start(); -spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data) { if (reg_addr != REG_Motion_Burst) { _inBurst = false; } - spi_start_adv(); // send address of the register, with MSBit = 1 to indicate it's a write spi_status_t status = spi_write(reg_addr | 0x80); status = spi_write(data); // tSCLK-NCS for write operation - wait_us(20); + wait_us(35); - // tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound - wait_us(100); + // tSWW/tSWR (=180us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound + wait_us(145); spi_stop(); return status; } -uint8_t spi_read_adv(uint8_t reg_addr) { - spi_start_adv(); +uint8_t pmw3360_read(uint8_t reg_addr) { + pmw3360_spi_start(); // send adress of the register, with MSBit = 0 to indicate it's a read spi_write(reg_addr & 0x7f); - uint8_t data = spi_read(); // tSCLK-NCS for read operation is 120ns @@ -133,19 +131,6 @@ uint8_t spi_read_adv(uint8_t reg_addr) { return data; } -void pmw3360_set_cpi(uint16_t cpi) { - uint8_t cpival = constrain((cpi / 100) - 1, 0, MAX_CPI); - - spi_start_adv(); - spi_write_adv(REG_Config1, cpival); - spi_stop(); -} - -uint16_t pmw3360_get_cpi(void) { - uint8_t cpival = spi_read_adv(REG_Config1); - return (uint16_t)((cpival + 1) & 0xFF) * 100; -} - bool pmw3360_init(void) { setPinOutput(PMW3360_CS_PIN); @@ -153,42 +138,51 @@ bool pmw3360_init(void) { _inBurst = false; spi_stop(); - spi_start_adv(); + pmw3360_spi_start(); spi_stop(); - spi_write_adv(REG_Shutdown, 0xb6); // Shutdown first + pmw3360_write(REG_Shutdown, 0xb6); // Shutdown first wait_ms(300); - spi_start_adv(); + pmw3360_spi_start(); wait_us(40); - spi_stop_adv(); + spi_stop(); wait_us(40); - spi_write_adv(REG_Power_Up_Reset, 0x5a); + // reboot + pmw3360_write(REG_Power_Up_Reset, 0x5a); wait_ms(50); - spi_read_adv(REG_Motion); - spi_read_adv(REG_Delta_X_L); - spi_read_adv(REG_Delta_X_H); - spi_read_adv(REG_Delta_Y_L); - spi_read_adv(REG_Delta_Y_H); + // read registers and discard + pmw3360_read(REG_Motion); + pmw3360_read(REG_Delta_X_L); + pmw3360_read(REG_Delta_X_H); + pmw3360_read(REG_Delta_Y_L); + pmw3360_read(REG_Delta_Y_H); pmw3360_upload_firmware(); - spi_stop_adv(); + spi_stop(); wait_ms(10); pmw3360_set_cpi(PMW3360_CPI); wait_ms(1); - spi_write_adv(REG_Config2, 0x00); + pmw3360_write(REG_Config2, 0x00); - spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -30, 30)); + pmw3360_write(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -127, 127)); - spi_write_adv(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE); + pmw3360_write(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE); bool init_success = pmw3360_check_signature(); +#ifdef CONSOLE_ENABLE + if (init_success) { + dprintf("pmw3360 signature verified"); + } else { + dprintf("pmw3360 signature verification failed!"); + } +#endif writePinLow(PMW3360_CS_PIN); @@ -196,13 +190,13 @@ bool pmw3360_init(void) { } void pmw3360_upload_firmware(void) { - spi_write_adv(REG_SROM_Enable, 0x1d); + pmw3360_write(REG_SROM_Enable, 0x1d); wait_ms(10); - spi_write_adv(REG_SROM_Enable, 0x18); + pmw3360_write(REG_SROM_Enable, 0x18); - spi_start_adv(); + pmw3360_spi_start(); spi_write(REG_SROM_Load_Burst | 0x80); wait_us(15); @@ -214,68 +208,72 @@ void pmw3360_upload_firmware(void) { } wait_us(200); - spi_read_adv(REG_SROM_ID); - - spi_write_adv(REG_Config2, 0x00); - - spi_stop(); - wait_ms(10); + pmw3360_read(REG_SROM_ID); + pmw3360_write(REG_Config2, 0x00); } bool pmw3360_check_signature(void) { - uint8_t pid = spi_read_adv(REG_Product_ID); - uint8_t iv_pid = spi_read_adv(REG_Inverse_Product_ID); - uint8_t SROM_ver = spi_read_adv(REG_SROM_ID); + uint8_t pid = pmw3360_read(REG_Product_ID); + uint8_t iv_pid = pmw3360_read(REG_Inverse_Product_ID); + uint8_t SROM_ver = pmw3360_read(REG_SROM_ID); return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04 } +uint16_t pmw3360_get_cpi(void) { + uint8_t cpival = pmw3360_read(REG_Config1); + return (uint16_t)((cpival + 1) & 0xFF) * CPI_STEP; +} + +void pmw3360_set_cpi(uint16_t cpi) { + uint8_t cpival = constrain((cpi / CPI_STEP) - 1, 0, MAX_CPI); + pmw3360_write(REG_Config1, cpival); +} + report_pmw3360_t pmw3360_read_burst(void) { + report_pmw3360_t report = {0}; + if (!_inBurst) { #ifdef CONSOLE_ENABLE dprintf("burst on"); #endif - spi_write_adv(REG_Motion_Burst, 0x00); + pmw3360_write(REG_Motion_Burst, 0x00); _inBurst = true; } - spi_start_adv(); + pmw3360_spi_start(); spi_write(REG_Motion_Burst); wait_us(35); // waits for tSRAD - report_pmw3360_t data = {0}; - - data.motion = spi_read(); + report.motion = spi_read(); spi_write(0x00); // skip Observation - data.dx = spi_read(); - data.mdx = spi_read(); - data.dy = spi_read(); - data.mdy = spi_read(); + report.dx = spi_read(); + report.mdx = spi_read(); + report.dy = spi_read(); + report.mdy = spi_read(); spi_stop(); #ifdef CONSOLE_ENABLE if (debug_mouse) { - print_byte(data.motion); - print_byte(data.dx); - print_byte(data.mdx); - print_byte(data.dy); - print_byte(data.mdy); + print_byte(report.motion); + print_byte(report.dx); + print_byte(report.mdx); + print_byte(report.dy); + print_byte(report.mdy); dprintf("\n"); } #endif - data.isMotion = (data.motion & 0x80) != 0; - data.isOnSurface = (data.motion & 0x08) == 0; - data.dx |= (data.mdx << 8); - data.dx = data.dx * -1; - data.dy |= (data.mdy << 8); - data.dy = data.dy * -1; - - spi_stop(); + report.isMotion = (report.motion & 0x80) != 0; + report.isOnSurface = (report.motion & 0x08) == 0; + report.dx |= (report.mdx << 8); + report.dx = report.dx * -1; + report.dy |= (report.mdy << 8); + report.dy = report.dy * -1; - if (data.motion & 0b111) { // panic recovery, sometimes burst mode works weird. + if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird. _inBurst = false; } - return data; + return report; } diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 9aa8e13f8e..b46fc9056e 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -19,8 +19,6 @@ #pragma once #include <stdint.h> -#include "report.h" -#include "spi_master.h" #ifndef PMW3360_CPI # define PMW3360_CPI 1600 @@ -69,10 +67,6 @@ This should work for the 3390 and 3391 too, in theory. # define PMW3360_FIRMWARE_H "pmw3360_firmware.h" #endif -#ifdef CONSOLE_ENABLE -void print_byte(uint8_t byte); -#endif - typedef struct { int8_t motion; bool isMotion; // True if a motion is detected. @@ -83,16 +77,10 @@ typedef struct { int8_t mdy; } report_pmw3360_t; -bool spi_start_adv(void); -void spi_stop_adv(void); -spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data); -uint8_t spi_read_adv(uint8_t reg_addr); -bool pmw3360_init(void); -void pmw3360_set_cpi(uint16_t cpi); -uint16_t pmw3360_get_cpi(void); -void pmw3360_upload_firmware(void); -bool pmw3360_check_signature(void); +bool pmw3360_init(void); +void pmw3360_upload_firmware(void); +bool pmw3360_check_signature(void); +uint16_t pmw3360_get_cpi(void); +void pmw3360_set_cpi(uint16_t cpi); +/* Reads and clears the current delta values on the sensor */ report_pmw3360_t pmw3360_read_burst(void); - -#define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0) -#define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI) diff --git a/keyboards/40percentclub/ut47/keymaps/default/keymap.c b/keyboards/40percentclub/ut47/keymaps/default/keymap.c index 0fa7838dfd..4eb2c190c1 100644 --- a/keyboards/40percentclub/ut47/keymaps/default/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/default/keymap.c @@ -15,7 +15,7 @@ */ #include QMK_KEYBOARD_H #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" #endif #define LT3_TAB LT(3, KC_TAB) @@ -108,11 +108,11 @@ LAYOUT( /* Tab */ //LED keymap functions #ifdef LED_ENABLE void led_chmode(void) { - serial_send(101); + uart_write(0x65); } void led_toggle(void) { - serial_send(100); + uart_write(0x64); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c index 0c1c2e7599..8a0ba7b391 100644 --- a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c @@ -15,7 +15,7 @@ */ #include QMK_KEYBOARD_H #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" #endif #define LT3_TAB LT(3, KC_TAB) @@ -108,11 +108,11 @@ LAYOUT( /* Tab */ //LED keymap functions #ifdef LED_ENABLE void led_chmode(void) { - serial_send(101); + uart_write(0x65); } void led_toggle(void) { - serial_send(100); + uart_write(0x64); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c index 52372e2857..5e79cdb9a4 100644 --- a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c @@ -15,7 +15,7 @@ */ #include QMK_KEYBOARD_H #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" #endif @@ -151,11 +151,11 @@ LAYOUT( /* GAMING, toggled on and off - L5 */ //LED keymap functions #ifdef LED_ENABLE void led_chmode(void) { - serial_send(101); + uart_write(0x65); } void led_toggle(void) { - serial_send(100); + uart_write(0x64); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c index ae8ad3e378..75dba3a2d4 100644 --- a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c @@ -15,7 +15,7 @@ */ #include QMK_KEYBOARD_H #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" #endif #define LT3_TAB LT(3, KC_TAB) @@ -60,11 +60,11 @@ LAYOUT( /* Tab */ //LED keymap functions #ifdef LED_ENABLE void led_chmode(void) { - serial_send(101); + uart_write(0x65); } void led_toggle(void) { - serial_send(100); + uart_write(0x64); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/40percentclub/ut47/matrix.c b/keyboards/40percentclub/ut47/matrix.c index e47c7f8e13..89537592c5 100644 --- a/keyboards/40percentclub/ut47/matrix.c +++ b/keyboards/40percentclub/ut47/matrix.c @@ -26,10 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "debug.h" #include "util.h" #include "matrix.h" -#ifdef LED_ENABLE - #include "protocol/serial.h" -#endif - #ifndef DEBOUNCE # define DEBOUNCE 5 @@ -69,10 +65,6 @@ void matrix_init(void) matrix[i] = 0; matrix_debouncing[i] = 0; } - -#ifdef LED_ENABLE - serial_init(); -#endif } uint8_t matrix_scan(void) @@ -104,12 +96,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk index 29cee474ff..6c9805e0fc 100644 --- a/keyboards/40percentclub/ut47/rules.mk +++ b/keyboards/40percentclub/ut47/rules.mk @@ -18,4 +18,5 @@ AUDIO_ENABLE = no # Audio output # custom matrix setup CUSTOM_MATRIX = yes -SRC += matrix.c protocol/serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/40percentclub/ut47/ut47.c b/keyboards/40percentclub/ut47/ut47.c index 9054335e5a..864edaeb57 100644 --- a/keyboards/40percentclub/ut47/ut47.c +++ b/keyboards/40percentclub/ut47/ut47.c @@ -15,7 +15,11 @@ */ #include "ut47.h" #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" + +void matrix_init_kb() { + uart_init(9600); +} #endif bool process_record_kb(uint16_t keycode, keyrecord_t *record) { @@ -23,7 +27,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { // runs for every action, just before processing by the firmware if (record->event.pressed) { #ifdef LED_ENABLE - serial_send((record->event.key.row*16)+record->event.key.col); + uart_write((record->event.key.row*16)+record->event.key.col); #endif } return process_record_user(keycode, record); diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h index 9ad384c8ff..0e4f4c3baf 100644 --- a/keyboards/ai03/orbit/config.h +++ b/keyboards/ai03/orbit/config.h @@ -44,13 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 } #define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 } #define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 } - -#define SPLIT_HAND_PIN D5 - -//#define USE_I2C - -#define SELECT_SOFT_SERIAL_SPEED 1 - #define UNUSED_PINS /* COL2ROW, ROW2COL */ @@ -60,6 +53,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 +#define SELECT_SOFT_SERIAL_SPEED 1 + +#define SPLIT_LED_STATE_ENABLE +#define SPLIT_LAYER_STATE_ENABLE + +#define SPLIT_HAND_PIN D5 #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING diff --git a/keyboards/ai03/orbit/keymaps/default/keymap.c b/keyboards/ai03/orbit/keymaps/default/keymap.c index fa383d7c00..c9696ccde6 100644 --- a/keyboards/ai03/orbit/keymaps/default/keymap.c +++ b/keyboards/ai03/orbit/keymaps/default/keymap.c @@ -48,25 +48,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case MANUAL: - if (record->event.pressed) - { - // Keypress + if (record->event.pressed) { SEND_STRING("https://kb.ai03.me/redir/orbit"); - } - else - { - // Key release } break; case DBLZERO: - if (record->event.pressed) - { - // Keypress + if (record->event.pressed) { SEND_STRING("00"); - } - else - { - // Key release } break; } diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c deleted file mode 100644 index b8e3296686..0000000000 --- a/keyboards/ai03/orbit/matrix.c +++ /dev/null @@ -1,328 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include "wait.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "config.h" -#include "split_flags.h" -#include "quantum.h" -#include "debounce.h" -#include "transport.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -//#define ROWS_PER_HAND (MATRIX_ROWS / 2) - -#ifdef DIRECT_PINS -static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; -#else -static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t raw_matrix[ROWS_PER_HAND]; - -// row offsets for each hand -uint8_t thisHand, thatHand; - -// user-defined overridable functions - -__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } - -__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } - -__attribute__((weak)) void matrix_init_user(void) {} - -__attribute__((weak)) void matrix_scan_user(void) {} - -__attribute__((weak)) void matrix_slave_scan_user(void) {} - -// helper functions - -inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } - -inline uint8_t matrix_cols(void) { return MATRIX_COLS; } - -bool matrix_is_modified(void) { - if (debounce_active()) return false; - return true; -} - -inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } - -inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } - -void matrix_print(void) { - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); - print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) { - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; -} - -// matrix code - -#ifdef DIRECT_PINS - -static void init_pins(void) { - for (int row = 0; row < MATRIX_ROWS; row++) { - for (int col = 0; col < MATRIX_COLS; col++) { - pin_t pin = direct_pins[row][col]; - if (pin != NO_PIN) { - setPinInputHigh(pin); - } - } - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - matrix_row_t last_row_value = current_matrix[current_row]; - current_matrix[current_row] = 0; - - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - pin_t pin = direct_pins[current_row][col_index]; - if (pin != NO_PIN) { - current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index); - } - } - - return (last_row_value != current_matrix[current_row]); -} - -#elif (DIODE_DIRECTION == COL2ROW) - -static void select_row(uint8_t row) { - setPinOutput(row_pins[row]); - writePinLow(row_pins[row]); -} - -static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } - -static void unselect_rows(void) { - for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { - setPinInputHigh(row_pins[x]); - } -} - -static void init_pins(void) { - unselect_rows(); - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - -#elif (DIODE_DIRECTION == ROW2COL) - -static void select_col(uint8_t col) { - setPinOutput(col_pins[col]); - writePinLow(col_pins[col]); -} - -static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); } - -static void unselect_cols(void) { - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - -static void init_pins(void) { - unselect_cols(); - for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { - setPinInputHigh(row_pins[x]); - } -} - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { - bool matrix_changed = false; - - // Select col and wait for col selecton to stabilize - select_col(current_col); - wait_us(30); - - // For each row... - for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - - // Check row pin state - if (readPin(row_pins[row_index])) { - // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); - } else { - // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { - matrix_changed = true; - } - } - - // Unselect col - unselect_col(current_col); - - return matrix_changed; -} - -#endif - -void matrix_init(void) { - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - - // Set pinout for right half if pinout for that half is defined - if (!isLeftHand) { -#ifdef MATRIX_ROW_PINS_RIGHT - const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - row_pins[i] = row_pins_right[i]; - } -#endif -#ifdef MATRIX_COL_PINS_RIGHT - const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT; - for (uint8_t i = 0; i < MATRIX_COLS; i++) { - col_pins[i] = col_pins_right[i]; - } -#endif - } - - thisHand = isLeftHand ? 0 : (ROWS_PER_HAND); - thatHand = ROWS_PER_HAND - thisHand; - - // initialize key pins - init_pins(); - - // initialize matrix state: all keys off - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - } - - debounce_init(ROWS_PER_HAND); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) { - bool changed = false; - -#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { - changed |= read_cols_on_row(raw_matrix, current_row); - } -#elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - changed |= read_rows_on_col(raw_matrix, current_col); - } -#endif - - debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); - - return 1; -} - -uint8_t matrix_scan(void) { - uint8_t ret = _matrix_scan(); - - if (is_keyboard_master()) { - static uint8_t error_count; - - if (!transport_master(matrix + thatHand)) { - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[thatHand + i] = 0; - } - } - } else { - error_count = 0; - } - - matrix_scan_quantum(); - } else { - transport_slave(matrix + thisHand); - matrix_slave_scan_user(); - } - - return ret; -} diff --git a/keyboards/ai03/orbit/orbit.c b/keyboards/ai03/orbit/orbit.c index 97553e318a..5097f9cd90 100644 --- a/keyboards/ai03/orbit/orbit.c +++ b/keyboards/ai03/orbit/orbit.c @@ -15,196 +15,124 @@ */ #include "orbit.h" #include "split_util.h" -#include "transport.h" +void led_init_ports(void) { + // Initialize indicator LEDs to output + if (isLeftHand) { + setPinOutput(C6); + setPinOutput(B6); + setPinOutput(B5); + } else { + setPinOutput(F6); + setPinOutput(F7); + setPinOutput(C7); + } + + set_layer_indicators(0); +} // Call led_toggle to set LEDs easily // LED IDs: -// +// // (LEFT) 0 1 2 | 3 4 5 (RIGHT) - -void led_toggle(int id, bool on) { - - if (isLeftHand) { - switch(id) { - case 0: - // Left hand C6 - if (on) - //PORTC |= (1<<6); - writePinHigh(C6); - else - //PORTC &= ~(1<<6); - writePinLow(C6); - break; - case 1: - // Left hand B6 - if (on) - //PORTB |= (1<<6); - writePinHigh(B6); - else - //PORTB &= ~(1<<6); - writePinLow(B6); - break; - case 2: - // Left hand B5 - if (on) - //PORTB |= (1<<5); - writePinHigh(B5); - else - //PORTB &= ~(1<<5); - writePinLow(B5); - break; - default: - break; - } - } else { - switch(id) { - case 3: - // Right hand F6 - if (on) - //PORTF |= (1<<6); - writePinHigh(F6); - else - //PORTF &= ~(1<<6); - writePinLow(F6); - break; - case 4: - // Right hand F7 - if (on) - //PORTF |= (1<<7); - writePinHigh(F7); - else - //PORTF &= ~(1<<7); - writePinLow(F7); - break; - case 5: - // Right hand C7 - if (on) - //PORTC |= (1<<7); - writePinHigh(C7); - else - //PORTC &= ~(1<<7); - writePinLow(C7); - break; - default: - break; - } - } +void led_toggle(uint8_t id, bool on) { + if (isLeftHand) { + switch (id) { + case 0: + // Left hand C6 + writePin(C6, on); + break; + case 1: + // Left hand B6 + writePin(B6, on); + break; + case 2: + // Left hand B5 + writePin(B5, on); + break; + default: + break; + } + } else { + switch (id) { + case 3: + // Right hand F6 + writePin(F6, on); + break; + case 4: + // Right hand F7 + writePin(F7, on); + break; + case 5: + // Right hand C7 + writePin(C7, on); + break; + default: + break; + } + } } // Set all LEDs at once using an array of 6 booleans // LED IDs: -// +// // (LEFT) 0 1 2 | 3 4 5 (RIGHT) -// +// // Ex. set_all_leds({ false, false, false, true, true, true }) would turn off left hand, turn on right hand void set_all_leds(bool leds[6]) { - for (int i = 0; i < 6; i++) { - led_toggle(i, leds[i]); - } + for (int i = 0; i < 6; i++) { + led_toggle(i, leds[i]); + } } void set_layer_indicators(uint8_t layer) { - - switch (layer) - { - case 0: - led_toggle(0, true); - led_toggle(1, false); - led_toggle(2, false); - break; - case 1: - led_toggle(0, true); - led_toggle(1, true); - led_toggle(2, false); - break; - case 2: - led_toggle(0, true); - led_toggle(1, true); - led_toggle(2, true); - break; - case 3: - led_toggle(0, false); - led_toggle(1, true); - led_toggle(2, true); - break; - case 4: - led_toggle(0, false); - led_toggle(1, false); - led_toggle(2, true); - break; - default: - led_toggle(0, true); - led_toggle(1, false); - led_toggle(2, true); - break; - } - + switch (layer) { + case 0: + led_toggle(0, true); + led_toggle(1, false); + led_toggle(2, false); + break; + case 1: + led_toggle(0, true); + led_toggle(1, true); + led_toggle(2, false); + break; + case 2: + led_toggle(0, true); + led_toggle(1, true); + led_toggle(2, true); + break; + case 3: + led_toggle(0, false); + led_toggle(1, true); + led_toggle(2, true); + break; + case 4: + led_toggle(0, false); + led_toggle(1, false); + led_toggle(2, true); + break; + default: + led_toggle(0, true); + led_toggle(1, false); + led_toggle(2, true); + break; + } } -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - // Initialize indicator LEDs to output - if (isLeftHand) - { - setPinOutput(C6); - setPinOutput(B6); - setPinOutput(B5); - //DDRC |= (1<<6); - //DDRB |= (1<<6); - //DDRB |= (1<<5); - } - else - { - setPinOutput(F6); - setPinOutput(F7); - setPinOutput(C7); - //DDRF |= (1<<6); - //DDRF |= (1<<7); - //DDRC |= (1<<7); - } - - set_layer_indicators(0); - - matrix_init_user(); +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + led_toggle(3, led_state.num_lock); + led_toggle(4, led_state.caps_lock); + led_toggle(5, led_state.scroll_lock); + } + return res; } -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (is_keyboard_master()) { - - serial_m2s_buffer.nlock_led = IS_LED_ON(usb_led, USB_LED_NUM_LOCK); - serial_m2s_buffer.clock_led = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK); - serial_m2s_buffer.slock_led = IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK); - - led_toggle(3, IS_LED_ON(usb_led, USB_LED_NUM_LOCK)); - led_toggle(4, IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)); - led_toggle(5, IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)); - - } - - led_set_user(usb_led); -} +layer_state_t layer_state_set_kb(layer_state_t state) { + set_layer_indicators(get_highest_layer(state)); -uint32_t layer_state_set_kb(uint32_t state) { - - if (is_keyboard_master()) - { - serial_m2s_buffer.current_layer = biton32(state); - - // If left half, do the LED toggle thing - if (isLeftHand) - { - set_layer_indicators(biton32(state)); - } - - } - // NOTE: Do not set slave LEDs here. - // This is not called on slave - - return layer_state_set_user(state); + return layer_state_set_user(state); } diff --git a/keyboards/ai03/orbit/orbit.h b/keyboards/ai03/orbit/orbit.h index 39f1ebb0e3..7f3b1aca32 100644 --- a/keyboards/ai03/orbit/orbit.h +++ b/keyboards/ai03/orbit/orbit.h @@ -18,6 +18,8 @@ #include "quantum.h" +#define XXX KC_NO + /* This a shortcut to help you visually see your layout. * * The first section contains all of the arguments representing the physical @@ -26,17 +28,6 @@ * The second converts the arguments into a two-dimensional array which * represents the switch matrix. */ - -#ifdef USE_I2C -#include <stddef.h> -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/interrupt.h> -#endif -#endif - -#define XXX KC_NO - #define LAYOUT( \ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ @@ -56,6 +47,6 @@ { R40, R41, R42, R43, R44, R45, XXX } \ } -extern void led_toggle(int id, bool on); +void led_toggle(uint8_t id, bool on); void set_all_leds(bool leds[6]); -extern void set_layer_indicators(uint8_t layer); +void set_layer_indicators(uint8_t layer); diff --git a/keyboards/ai03/orbit/readme.md b/keyboards/ai03/orbit/readme.md index 58ba2079d5..0c320929b6 100644 --- a/keyboards/ai03/orbit/readme.md +++ b/keyboards/ai03/orbit/readme.md @@ -4,9 +4,9 @@ A split ergonomic keyboard project. -Keyboard Maintainer: [ai03](https://github.com/ai03-2725) -Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit) -Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed. +* Keyboard Maintainer: [ai03](https://github.com/ai03-2725) +* Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit) +* Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk index f98e2382f1..a0f1ab94a9 100644 --- a/keyboards/ai03/orbit/rules.mk +++ b/keyboards/ai03/orbit/rules.mk @@ -16,12 +16,4 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -USE_I2C = no # I2C for split communication -CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) -# SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files - -SRC += split_util.c \ - split_flags.c \ - serial.c \ - transport.c \ - matrix.c +SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files diff --git a/keyboards/ai03/orbit/serial.c b/keyboards/ai03/orbit/serial.c deleted file mode 100644 index 636dfa0906..0000000000 --- a/keyboards/ai03/orbit/serial.c +++ /dev/null @@ -1,545 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stddef.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef SOFT_SERIAL_PIN - -#ifdef __AVR_ATmega32U4__ - // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. - #ifdef USE_AVR_I2C - #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 - #error Using ATmega32U4 I2C, so can not use PD0, PD1 - #endif - #endif - - #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 - #define SERIAL_PIN_DDR DDRD - #define SERIAL_PIN_PORT PORTD - #define SERIAL_PIN_INPUT PIND - #if SOFT_SERIAL_PIN == D0 - #define SERIAL_PIN_MASK _BV(PD0) - #define EIMSK_BIT _BV(INT0) - #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) - #define SERIAL_PIN_INTERRUPT INT0_vect - #elif SOFT_SERIAL_PIN == D1 - #define SERIAL_PIN_MASK _BV(PD1) - #define EIMSK_BIT _BV(INT1) - #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) - #define SERIAL_PIN_INTERRUPT INT1_vect - #elif SOFT_SERIAL_PIN == D2 - #define SERIAL_PIN_MASK _BV(PD2) - #define EIMSK_BIT _BV(INT2) - #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) - #define SERIAL_PIN_INTERRUPT INT2_vect - #elif SOFT_SERIAL_PIN == D3 - #define SERIAL_PIN_MASK _BV(PD3) - #define EIMSK_BIT _BV(INT3) - #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) - #define SERIAL_PIN_INTERRUPT INT3_vect - #endif - #elif SOFT_SERIAL_PIN == E6 - #define SERIAL_PIN_DDR DDRE - #define SERIAL_PIN_PORT PORTE - #define SERIAL_PIN_INPUT PINE - #define SERIAL_PIN_MASK _BV(PE6) - #define EIMSK_BIT _BV(INT6) - #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) - #define SERIAL_PIN_INTERRUPT INT6_vect - #else - #error invalid SOFT_SERIAL_PIN value - #endif - -#else - #error serial.c now support ATmega32U4 only -#endif - -#define ALWAYS_INLINE __attribute__((always_inline)) -#define NO_INLINE __attribute__((noinline)) -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -#define ODD_PARITY 1 -#define EVEN_PARITY 0 -#define PARITY EVEN_PARITY - -#ifdef SERIAL_DELAY - // custom setup in config.h - // #define TID_SEND_ADJUST 2 - // #define SERIAL_DELAY 6 // micro sec - // #define READ_WRITE_START_ADJUST 30 // cycles - // #define READ_WRITE_WIDTH_ADJUST 8 // cycles -#else -// ============ Standard setups ============ - -#ifndef SELECT_SOFT_SERIAL_SPEED -#define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps (Experimental only) -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -#if __GNUC__ < 6 - #define TID_SEND_ADJUST 14 -#else - #define TID_SEND_ADJUST 2 -#endif - -#if SELECT_SOFT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 34 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 36 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 5 - // Ultra Low speed - #define SERIAL_DELAY 48 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#else -#error invalid SELECT_SOFT_SERIAL_SPEED value -#endif /* SELECT_SOFT_SERIAL_SPEED */ -#endif /* SERIAL_DELAY */ - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH_US 1 -#ifndef SERIAL_USE_MULTI_TRANSACTION - #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY -#else - #define SLAVE_INT_ACK_WIDTH_UNIT 2 - #define SLAVE_INT_ACK_WIDTH 4 -#endif - -static SSTD_t *Transaction_table = NULL; -static uint8_t Transaction_table_size = 0; - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static void serial_output(void) ALWAYS_INLINE; -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static void serial_low(void) ALWAYS_INLINE; -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static void serial_high(void) ALWAYS_INLINE; -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_output(); - serial_high(); -} - -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_input_with_pullup(); - - // Enable INT0-INT3,INT6 - EIMSK |= EIMSK_BIT; -#if SERIAL_PIN_MASK == _BV(PE6) - // Trigger on falling edge of INT6 - EICRB &= EICRx_BIT; -#else - // Trigger on falling edge of INT0-INT3 - EICRA &= EICRx_BIT; -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static -void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { - serial_delay_half1(); // read the middle of pulses - if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; - } else { - byte = (byte << 1) | 0; p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb)? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if(p & 1) { serial_high(); } - else { serial_low(); } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data,8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static -void change_sender2reciver(void) { - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 -} - -inline static -void change_reciver2sender(void) { - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); //3 - serial_delay_half1(); //4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) -{ - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - -#ifndef SERIAL_USE_MULTI_TRANSACTION - serial_low(); - serial_output(); - SSTD_t *trans = Transaction_table; -#else - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount,7); - tid = bits>>3; - bits = (bits&7) != nibble_bits_count(tid); - if( bits || pecount> 0 || tid > Transaction_table_size ) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); - SSTD_t *trans = &Transaction_table[tid]; - serial_low(); // response step2 ack high->low -#endif - - // target send phase - if( trans->target2initiator_buffer_size > 0 ) - serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if( trans->initiator2target_buffer_size > 0 ) { - if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); //weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void) { - SSTD_t *trans = Transaction_table; -#else -int soft_serial_transaction(int sstd_index) { - if( sstd_index > Transaction_table_size ) - return TRANSACTION_TYPE_ERROR; - SSTD_t *trans = &Transaction_table[sstd_index]; -#endif - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - -#ifndef SERIAL_USE_MULTI_TRANSACTION - // wait for the target response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the target is present - if (serial_read_pin()) { - // target failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - -#else - // send transaction table index - int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 7); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while( !serial_read_pin() ) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for( int i = 0; serial_read_pin(); i++ ) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } -#endif - - // initiator recive phase - // if the target is present syncronize with it - if( trans->target2initiator_buffer_size > 0 ) { - if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if( trans->initiator2target_buffer_size > 0 ) { - serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index) { - SSTD_t *trans = &Transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0;; - sei(); - return retval; -} -#endif - -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) -// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669) diff --git a/keyboards/ai03/orbit/serial.h b/keyboards/ai03/orbit/serial.h deleted file mode 100644 index 1c1e640069..0000000000 --- a/keyboards/ai03/orbit/serial.h +++ /dev/null @@ -1,62 +0,0 @@ -#pragma once - -#include <stdbool.h> - -// ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in config.h -// ///////////////////////////////////////////////////////////////// -// ex. -// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -// -// //// USE simple API (using signle-type transaction function) -// /* nothing */ -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION -// -// ///////////////////////////////////////////////////////////////// - -// Soft Serial Transaction Descriptor -typedef struct _SSTD_t { - uint8_t *status; - uint8_t initiator2target_buffer_size; - uint8_t *initiator2target_buffer; - uint8_t target2initiator_buffer_size; - uint8_t *target2initiator_buffer; -} SSTD_t; -#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) - -// initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); -// target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); - -// initiator resullt -#define TRANSACTION_END 0 -#define TRANSACTION_NO_RESPONSE 0x1 -#define TRANSACTION_DATA_ERROR 0x2 -#define TRANSACTION_TYPE_ERROR 0x4 -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void); -#else -int soft_serial_transaction(int sstd_index); -#endif - -// target status -// *SSTD_t.status has -// initiator: -// TRANSACTION_END -// or TRANSACTION_NO_RESPONSE -// or TRANSACTION_DATA_ERROR -// target: -// TRANSACTION_DATA_ERROR -// or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x8 -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index); -#endif diff --git a/keyboards/ai03/orbit/split_flags.c b/keyboards/ai03/orbit/split_flags.c deleted file mode 100644 index 1f5825d650..0000000000 --- a/keyboards/ai03/orbit/split_flags.c +++ /dev/null @@ -1,5 +0,0 @@ -#include "split_flags.h" - -volatile bool RGB_DIRTY = false; - -volatile bool BACKLIT_DIRTY = false;
\ No newline at end of file diff --git a/keyboards/ai03/orbit/split_flags.h b/keyboards/ai03/orbit/split_flags.h deleted file mode 100644 index aaac474a7d..0000000000 --- a/keyboards/ai03/orbit/split_flags.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include <stdint.h> - -/** -* Global Flags -**/ - -//RGB Stuff -extern volatile bool RGB_DIRTY; - - -//Backlight Stuff -extern volatile bool BACKLIT_DIRTY; diff --git a/keyboards/ai03/orbit/split_util.c b/keyboards/ai03/orbit/split_util.c deleted file mode 100644 index 2352e5a111..0000000000 --- a/keyboards/ai03/orbit/split_util.c +++ /dev/null @@ -1,87 +0,0 @@ -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" -#include "timer.h" -#include "split_flags.h" -#include "transport.h" -#include "quantum.h" - -#ifdef EE_HANDS -# include "eeprom.h" -# include "eeconfig.h" -#endif - -volatile bool isLeftHand = true; - -__attribute__((weak)) -bool is_keyboard_left(void) { - #ifdef SPLIT_HAND_PIN - // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand - setPinInput(SPLIT_HAND_PIN); - return readPin(SPLIT_HAND_PIN); - #else - #ifdef EE_HANDS - return eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - #ifdef MASTER_RIGHT - return !is_keyboard_master(); - #else - return is_keyboard_master(); - #endif - #endif - #endif -} - -bool is_keyboard_master(void) -{ -#ifdef __AVR__ - static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN; - - // only check once, as this is called often - if (usbstate == UNKNOWN) - { - USBCON |= (1 << OTGPADE); // enables VBUS pad - wait_us(5); - - usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS - } - - return (usbstate == MASTER); -#else - return true; -#endif -} - -static void keyboard_master_setup(void) { -#if defined(USE_I2C) - #ifdef SSD1306OLED - matrix_master_OLED_init (); - #endif -#endif - transport_master_init(); - - // For master the Backlight info needs to be sent on startup - // Otherwise the salve won't start with the proper info until an update - BACKLIT_DIRTY = true; -} - -static void keyboard_slave_setup(void) -{ - transport_slave_init(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) -{ - isLeftHand = is_keyboard_left(); - - if (is_keyboard_master()) - { - keyboard_master_setup(); - } - else - { - keyboard_slave_setup(); - } -} diff --git a/keyboards/ai03/orbit/split_util.h b/keyboards/ai03/orbit/split_util.h deleted file mode 100644 index 20f7535bf4..0000000000 --- a/keyboards/ai03/orbit/split_util.h +++ /dev/null @@ -1,10 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include <stdint.h> -#include <stdio.h> -#include <stdlib.h> - -extern volatile bool isLeftHand; - -void matrix_master_OLED_init (void); diff --git a/keyboards/ai03/orbit/transport.c b/keyboards/ai03/orbit/transport.c deleted file mode 100644 index 447fafed14..0000000000 --- a/keyboards/ai03/orbit/transport.c +++ /dev/null @@ -1,238 +0,0 @@ - -#include "transport.h" - -#include "config.h" -#include "matrix.h" -#include "quantum.h" - -#include "orbit.h" - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -#ifdef RGBLIGHT_ENABLE -# include "rgblight.h" -#endif - -#ifdef BACKLIGHT_ENABLE -# include "backlight.h" - extern backlight_config_t backlight_config; -#endif - -#if defined(USE_I2C) - -#include "i2c.h" - -#ifndef SLAVE_I2C_ADDRESS -# define SLAVE_I2C_ADDRESS 0x32 -#endif - -#if (MATRIX_COLS > 8) -# error "Currently only supports 8 COLS" -#endif - -// Get rows from other half over i2c -bool transport_master(matrix_row_t matrix[]) { - int err = 0; - - // write backlight info -#ifdef BACKLIGHT_ENABLE - if (BACKLIT_DIRTY) { - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // Backlight location - err = i2c_master_write(I2C_BACKLIT_START); - if (err) { goto i2c_error; } - - // Write backlight - i2c_master_write(get_backlight_level()); - - BACKLIT_DIRTY = false; - } -#endif - - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // start of matrix stored at I2C_KEYMAP_START - err = i2c_master_write(I2C_KEYMAP_START); - if (err) { goto i2c_error; } - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) { goto i2c_error; } - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[i] = i2c_master_read(I2C_ACK); - } - matrix[i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return false; - } - -#ifdef RGBLIGHT_ENABLE - if (RGB_DIRTY) { - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // RGB Location - err = i2c_master_write(I2C_RGB_START); - if (err) { goto i2c_error; } - - uint32_t dword = eeconfig_read_rgblight(); - - // Write RGB - err = i2c_master_write_data(&dword, 4); - if (err) { goto i2c_error; } - - RGB_DIRTY = false; - i2c_master_stop(); - } -#endif - - return true; -} - -void transport_slave(matrix_row_t matrix[]) { - - for (int i = 0; i < ROWS_PER_HAND; ++i) - { - i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i]; - } - // Read Backlight Info - #ifdef BACKLIGHT_ENABLE - if (BACKLIT_DIRTY) - { - backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]); - BACKLIT_DIRTY = false; - } - #endif - #ifdef RGBLIGHT_ENABLE - if (RGB_DIRTY) - { - // Disable interupts (RGB data is big) - cli(); - // Create new DWORD for RGB data - uint32_t dword; - - // Fill the new DWORD with the data that was sent over - uint8_t * dword_dat = (uint8_t *)(&dword); - for (int i = 0; i < 4; i++) - { - dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i]; - } - - // Update the RGB now with the new data and set RGB_DIRTY to false - rgblight_update_dword(dword); - RGB_DIRTY = false; - // Re-enable interupts now that RGB is set - sei(); - } - #endif -} - -void transport_master_init(void) { - i2c_master_init(); -} - -void transport_slave_init(void) { - i2c_slave_init(SLAVE_I2C_ADDRESS); -} - -#else // USE_SERIAL - -#include "serial.h" - - - -volatile Serial_s2m_buffer_t serial_s2m_buffer = {}; -volatile Serial_m2s_buffer_t serial_m2s_buffer = {}; -uint8_t volatile status0 = 0; - -SSTD_t transactions[] = { - { (uint8_t *)&status0, - sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer, - sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer - } -}; - -uint8_t slave_layer_cache; -uint8_t slave_nlock_cache; -uint8_t slave_clock_cache; -uint8_t slave_slock_cache; - -void transport_master_init(void) -{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } - -void transport_slave_init(void) -{ - soft_serial_target_init(transactions, TID_LIMIT(transactions)); - slave_layer_cache = 255; - slave_nlock_cache = 255; - slave_clock_cache = 255; - slave_slock_cache = 255; -} - -bool transport_master(matrix_row_t matrix[]) { - - if (soft_serial_transaction()) { - return false; - } - - // TODO: if MATRIX_COLS > 8 change to unpack() - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[i] = serial_s2m_buffer.smatrix[i]; - } - - #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - // Code to send RGB over serial goes here (not implemented yet) - #endif - - #ifdef BACKLIGHT_ENABLE - // Write backlight level for slave to read - serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0; - #endif - - return true; -} - -void transport_slave(matrix_row_t matrix[]) { - - // TODO: if MATRIX_COLS > 8 change to pack() - for (int i = 0; i < ROWS_PER_HAND; ++i) - { - serial_s2m_buffer.smatrix[i] = matrix[i]; - } - #ifdef BACKLIGHT_ENABLE - backlight_set(serial_m2s_buffer.backlight_level); - #endif - #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - // Add serial implementation for RGB here - #endif - - if (slave_layer_cache != serial_m2s_buffer.current_layer) { - slave_layer_cache = serial_m2s_buffer.current_layer; - set_layer_indicators(slave_layer_cache); - } - - if (slave_nlock_cache != serial_m2s_buffer.nlock_led) { - slave_nlock_cache = serial_m2s_buffer.nlock_led; - led_toggle(3, slave_nlock_cache); - } - if (slave_clock_cache != serial_m2s_buffer.clock_led) { - slave_clock_cache = serial_m2s_buffer.clock_led; - led_toggle(4, slave_clock_cache); - } - if (slave_slock_cache != serial_m2s_buffer.slock_led) { - slave_slock_cache = serial_m2s_buffer.slock_led; - led_toggle(5, slave_slock_cache); - } - -} - -#endif diff --git a/keyboards/ai03/orbit/transport.h b/keyboards/ai03/orbit/transport.h deleted file mode 100644 index 757eae6f5c..0000000000 --- a/keyboards/ai03/orbit/transport.h +++ /dev/null @@ -1,42 +0,0 @@ -#pragma once - -#include "matrix.h" - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -typedef struct _Serial_s2m_buffer_t { - // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack - matrix_row_t smatrix[ROWS_PER_HAND]; -} Serial_s2m_buffer_t; - -typedef struct _Serial_m2s_buffer_t { -#ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; -#endif -#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - rgblight_config_t rgblight_config; //not yet use - // - // When MCUs on both sides drive their respective RGB LED chains, - // it is necessary to synchronize, so it is necessary to communicate RGB information. - // In that case, define the RGBLIGHT_SPLIT macro. - // - // Otherwise, if the master side MCU drives both sides RGB LED chains, - // there is no need to communicate. -#endif - - uint8_t current_layer; - uint8_t nlock_led; - uint8_t clock_led; - uint8_t slock_led; - -} Serial_m2s_buffer_t; - -extern volatile Serial_s2m_buffer_t serial_s2m_buffer; -extern volatile Serial_m2s_buffer_t serial_m2s_buffer; - -void transport_master_init(void); -void transport_slave_init(void); - -// returns false if valid data not received from slave -bool transport_master(matrix_row_t matrix[]); -void transport_slave(matrix_row_t matrix[]); diff --git a/keyboards/amj96/matrix.c b/keyboards/amj96/matrix.c index 8e7bbaa791..ffd66d120f 100644 --- a/keyboards/amj96/matrix.c +++ b/keyboards/amj96/matrix.c @@ -108,12 +108,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/angel64/alpha/matrix.c b/keyboards/angel64/alpha/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/angel64/alpha/matrix.c +++ b/keyboards/angel64/alpha/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/angel64/rev1/matrix.c b/keyboards/angel64/rev1/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/angel64/rev1/matrix.c +++ b/keyboards/angel64/rev1/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/bpiphany/kitten_paw/matrix.c b/keyboards/bpiphany/kitten_paw/matrix.c index b59089cdf4..56114858f1 100644 --- a/keyboards/bpiphany/kitten_paw/matrix.c +++ b/keyboards/bpiphany/kitten_paw/matrix.c @@ -117,13 +117,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) { - if (debouncing) - return false; - else - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1<<col)); } diff --git a/keyboards/bpiphany/pegasushoof/2013/matrix.c b/keyboards/bpiphany/pegasushoof/2013/matrix.c index 037f323c00..09244982d9 100644 --- a/keyboards/bpiphany/pegasushoof/2013/matrix.c +++ b/keyboards/bpiphany/pegasushoof/2013/matrix.c @@ -110,13 +110,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) - return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/centromere/config.h b/keyboards/centromere/config.h index e502e2534b..b4cae20332 100644 --- a/keyboards/centromere/config.h +++ b/keyboards/centromere/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 500000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/centromere/matrix.c b/keyboards/centromere/matrix.c index 7256cd5cb5..bbd771f41b 100644 --- a/keyboards/centromere/matrix.c +++ b/keyboards/centromere/matrix.c @@ -15,80 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(500000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF remote slave to send the matrix information - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates, erase the last set of data uint8_t uart_data[11] = {0}; @@ -96,58 +37,27 @@ uint8_t matrix_scan(void) //there are 10 bytes corresponding to 1w columns, and an end byte for (uint8_t i = 0; i < 11; i++) { //wait for the serial data, timeout if it's been too long - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/centromere/rules.mk b/keyboards/centromere/rules.mk index ed777e1b9e..113e1e6aff 100644 --- a/keyboards/centromere/rules.mk +++ b/keyboards/centromere/rules.mk @@ -11,16 +11,19 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge -NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = yes # Unicode +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes +CUSTOM_MATRIX = lite -# # project specific files -SRC += matrix.c serial_uart.c +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c LAYOUTS = split_3x5_3 split_3x6_3 diff --git a/keyboards/chimera_ergo/config.h b/keyboards/chimera_ergo/config.h index 0767a218b5..3c0cc5c162 100644 --- a/keyboards/chimera_ergo/config.h +++ b/keyboards/chimera_ergo/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/chimera_ergo/matrix.c b/keyboards/chimera_ergo/matrix.c index 577176c466..603ad0f386 100644 --- a/keyboards/chimera_ergo/matrix.c +++ b/keyboards/chimera_ergo/matrix.c @@ -15,89 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[14] = {0}; @@ -107,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/chimera_ergo/rules.mk b/keyboards/chimera_ergo/rules.mk index a8bd3a027a..8cb1736147 100644 --- a/keyboards/chimera_ergo/rules.mk +++ b/keyboards/chimera_ergo/rules.mk @@ -8,13 +8,16 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite -# # project specific files -SRC += matrix.c serial_uart.c +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/chimera_ls/config.h b/keyboards/chimera_ls/config.h index 2eb028471d..ca92e1e2e4 100644 --- a/keyboards/chimera_ls/config.h +++ b/keyboards/chimera_ls/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/chimera_ls/matrix.c b/keyboards/chimera_ls/matrix.c index 9edd91818f..a92c3e8431 100644 --- a/keyboards/chimera_ls/matrix.c +++ b/keyboards/chimera_ls/matrix.c @@ -15,93 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#elif (MATRIX_COLS <= 64) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse64(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop64(matrix[i]) -# define ROW_SHIFTER ((uint64_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} +#include "quantum.h" +#include "matrix.h" +#include "uart.h" -void matrix_init(void) { - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -111,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/chimera_ls/rules.mk b/keyboards/chimera_ls/rules.mk index 377c379911..b7f6db5aa5 100644 --- a/keyboards/chimera_ls/rules.mk +++ b/keyboards/chimera_ls/rules.mk @@ -8,16 +8,19 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c LAYOUTS = ortho_4x12 diff --git a/keyboards/chimera_ortho/config.h b/keyboards/chimera_ortho/config.h index 974502525c..3d86343a67 100644 --- a/keyboards/chimera_ortho/config.h +++ b/keyboards/chimera_ortho/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/chimera_ortho/matrix.c b/keyboards/chimera_ortho/matrix.c index 34930af7e2..a92c3e8431 100644 --- a/keyboards/chimera_ortho/matrix.c +++ b/keyboards/chimera_ortho/matrix.c @@ -15,79 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -97,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk index fbe6872001..8cb1736147 100644 --- a/keyboards/chimera_ortho/rules.mk +++ b/keyboards/chimera_ortho/rules.mk @@ -8,13 +8,16 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/chimera_ortho_plus/config.h b/keyboards/chimera_ortho_plus/config.h index 4b12796e95..ebffb85657 100644 --- a/keyboards/chimera_ortho_plus/config.h +++ b/keyboards/chimera_ortho_plus/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/chimera_ortho_plus/matrix.c b/keyboards/chimera_ortho_plus/matrix.c index 818e05ac98..603ad0f386 100644 --- a/keyboards/chimera_ortho_plus/matrix.c +++ b/keyboards/chimera_ortho_plus/matrix.c @@ -15,79 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[14] = {0}; @@ -97,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/chimera_ortho_plus/rules.mk b/keyboards/chimera_ortho_plus/rules.mk index e99e79c327..0a8a31e7dd 100644 --- a/keyboards/chimera_ortho_plus/rules.mk +++ b/keyboards/chimera_ortho_plus/rules.mk @@ -17,7 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes -CUSTOM_MATRIX = yes +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/comet46/config.h b/keyboards/comet46/config.h index 067dabb103..5ea40c14c5 100644 --- a/keyboards/comet46/config.h +++ b/keyboards/comet46/config.h @@ -62,12 +62,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL)) #define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define MODS_GUI_MASK (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)) - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/comet46/matrix.c b/keyboards/comet46/matrix.c index 34930af7e2..a92c3e8431 100644 --- a/keyboards/comet46/matrix.c +++ b/keyboards/comet46/matrix.c @@ -15,79 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -97,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk index 814622226a..e177fc6441 100644 --- a/keyboards/comet46/rules.mk +++ b/keyboards/comet46/rules.mk @@ -8,16 +8,18 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite # project specific files SRC += matrix.c \ i2c.c \ - ssd1306.c \ - serial_uart.c + ssd1306.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h index 4afc654e85..35032835cd 100644 --- a/keyboards/converter/palm_usb/config.h +++ b/keyboards/converter/palm_usb/config.h @@ -60,58 +60,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) - - -/* Serial(USART) configuration - * asynchronous, negative logic, 9600baud, no flow control - * 1-start bit, 8-data bit, non parity, 1-stop bit - */ -#define SERIAL_SOFT_BAUD 9600 -#define SERIAL_SOFT_PARITY_NONE -#define SERIAL_SOFT_BIT_ORDER_LSB -#if (HANDSPRING == 0) - #define SERIAL_SOFT_LOGIC_NEGATIVE //RS232 logic -#endif -/* RXD Port */ -#define SERIAL_SOFT_RXD_ENABLE - -// we are using Pro micro pin 3 / D0 as serial -#define SERIAL_SOFT_RXD_DDR DDRD -#define SERIAL_SOFT_RXD_PORT PORTD -#define SERIAL_SOFT_RXD_PIN PIND -#define SERIAL_SOFT_RXD_BIT 0 -#define SERIAL_SOFT_RXD_VECT INT0_vect - -/* RXD Interupt */ -#define SERIAL_SOFT_RXD_INIT() do { \ - /* pin configuration: input with pull-up */ \ - SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ - SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ - /* enable interrupt: INT0(rising edge) */ \ - EICRA |= ((1<<ISC01)|(1<<ISC00)); \ - EIMSK |= (1<<INT0); \ - sei(); \ -} while (0) -#define SERIAL_SOFT_RXD_INT_ENTER() -#define SERIAL_SOFT_RXD_INT_EXIT() do { \ - /* clear interrupt flag */ \ - EIFR = (1<<INTF0); \ -} while (0) -#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) - -/* TXD Port */ -#define SERIAL_SOFT_TXD_ENABLE -#define SERIAL_SOFT_TXD_DDR DDRD -#define SERIAL_SOFT_TXD_PORT PORTD -#define SERIAL_SOFT_TXD_PIN PIND -#define SERIAL_SOFT_TXD_BIT 3 -#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0) -#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0) -#define SERIAL_SOFT_TXD_INIT() do { \ - /* pin configuration: output */ \ - SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \ - /* idle */ \ - SERIAL_SOFT_TXD_ON(); \ -} while (0) - - diff --git a/keyboards/converter/palm_usb/matrix.c b/keyboards/converter/palm_usb/matrix.c index 289284b616..010fd56c79 100644 --- a/keyboards/converter/palm_usb/matrix.c +++ b/keyboards/converter/palm_usb/matrix.c @@ -18,7 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H -#include "protocol/serial.h" +#include "uart.h" #include "timer.h" @@ -58,8 +58,6 @@ static uint16_t disconnect_counter = 0; #define COL(code) ((code & COL_MASK) ) #define KEYUP(code) ((code & KEY_MASK) >>7 ) -static bool is_modified = false; - __attribute__ ((weak)) void matrix_init_kb(void) { matrix_init_user(); @@ -166,7 +164,7 @@ uint8_t rts_reset(void) { uint8_t get_serial_byte(void) { static uint8_t code; while(1) { - code = serial_recv(); + code = uart_read(); if (code) { debug_hex(code); debug(" "); return code; @@ -242,7 +240,7 @@ void matrix_init(void) debug_enable = true; //debug_matrix =true; - serial_init(); // arguments all #defined + uart_init(9600); // arguments all #defined #if (HANDSPRING == 0) pins_init(); // set all inputs and outputs. @@ -292,7 +290,7 @@ void matrix_init(void) uint8_t matrix_scan(void) { uint8_t code; - code = serial_recv(); + code = uart_read(); if (!code) { /* disconnect_counter ++; @@ -354,11 +352,6 @@ uint8_t matrix_scan(void) return code; } -bool matrix_is_modified(void) -{ - return is_modified; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/converter/palm_usb/post_rules.mk b/keyboards/converter/palm_usb/post_rules.mk deleted file mode 100644 index 9c11076701..0000000000 --- a/keyboards/converter/palm_usb/post_rules.mk +++ /dev/null @@ -1,7 +0,0 @@ -ifdef HARDWARE_SERIAL - # Untested with palm_usb - SRC += protocol/serial_uart.c - OPT_DEFS += -DHARDWARE_SERIAL -else - SRC += protocol/serial_soft.c -endif diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk index c5e680b883..a1d2e39b23 100644 --- a/keyboards/converter/palm_usb/rules.mk +++ b/keyboards/converter/palm_usb/rules.mk @@ -20,5 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. CUSTOM_MATRIX = yes SRC += matrix.c +QUANTUM_LIB_SRC += uart.c DEFAULT_FOLDER = converter/palm_usb/stowaway diff --git a/keyboards/converter/sun_usb/command_extra.c b/keyboards/converter/sun_usb/command_extra.c index 756a9160bb..332776ab90 100644 --- a/keyboards/converter/sun_usb/command_extra.c +++ b/keyboards/converter/sun_usb/command_extra.c @@ -1,5 +1,5 @@ #include QMK_KEYBOARD_H -#include "protocol/serial.h" +#include "uart.h" bool sun_bell = false; bool sun_click = false; @@ -20,41 +20,41 @@ bool command_extra(uint8_t code) return false; case KC_DEL: print("Reset\n"); - serial_send(0x01); + uart_write(0x01); break; case KC_HOME: sun_bell = !sun_bell; if (sun_bell) { print("Bell On\n"); - serial_send(0x02); + uart_write(0x02); } else { print("Bell Off\n"); - serial_send(0x03); + uart_write(0x03); } break; case KC_END: sun_click = !sun_click; if (sun_click) { print("Click On\n"); - serial_send(0x0A); + uart_write(0x0A); } else { print("Click Off\n"); - serial_send(0x0B); + uart_write(0x0B); } break; case KC_PGUP: print("LED all on\n"); - serial_send(0x0E); - serial_send(0xFF); + uart_write(0x0E); + uart_write(0xFF); break; case KC_PGDOWN: print("LED all off\n"); - serial_send(0x0E); - serial_send(0x00); + uart_write(0x0E); + uart_write(0x00); break; case KC_INSERT: print("layout\n"); - serial_send(0x0F); + uart_write(0x0F); break; default: xprintf("Unknown extra command: %02X\n", code); diff --git a/keyboards/converter/sun_usb/config.h b/keyboards/converter/sun_usb/config.h index c67ae5ebae..0a4aa019f7 100644 --- a/keyboards/converter/sun_usb/config.h +++ b/keyboards/converter/sun_usb/config.h @@ -33,50 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) - - -/* Serial(USART) configuration - * asynchronous, negative logic, 1200baud, no flow control - * 1-start bit, 8-data bit, non parity, 1-stop bit - */ -#define SERIAL_SOFT_BAUD 1200 -#define SERIAL_SOFT_PARITY_NONE -#define SERIAL_SOFT_BIT_ORDER_LSB -#define SERIAL_SOFT_LOGIC_NEGATIVE -/* RXD Port */ -#define SERIAL_SOFT_RXD_ENABLE -#define SERIAL_SOFT_RXD_DDR DDRD -#define SERIAL_SOFT_RXD_PORT PORTD -#define SERIAL_SOFT_RXD_PIN PIND -#define SERIAL_SOFT_RXD_BIT 2 -#define SERIAL_SOFT_RXD_VECT INT2_vect -/* RXD Interupt */ -#define SERIAL_SOFT_RXD_INIT() do { \ - /* pin configuration: input with pull-up */ \ - SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ - SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ - /* enable interrupt: INT2(rising edge) */ \ - EICRA |= ((1<<ISC21)|(1<<ISC20)); \ - EIMSK |= (1<<INT2); \ - sei(); \ -} while (0) -#define SERIAL_SOFT_RXD_INT_ENTER() -#define SERIAL_SOFT_RXD_INT_EXIT() do { \ - /* clear interrupt flag */ \ - EIFR = (1<<INTF2); \ -} while (0) -#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) -/* TXD Port */ -#define SERIAL_SOFT_TXD_ENABLE -#define SERIAL_SOFT_TXD_DDR DDRD -#define SERIAL_SOFT_TXD_PORT PORTD -#define SERIAL_SOFT_TXD_PIN PIND -#define SERIAL_SOFT_TXD_BIT 3 -#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0) -#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0) -#define SERIAL_SOFT_TXD_INIT() do { \ - /* pin configuration: output */ \ - SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \ - /* idle */ \ - SERIAL_SOFT_TXD_ON(); \ -} while (0) diff --git a/keyboards/converter/sun_usb/led.c b/keyboards/converter/sun_usb/led.c index a409699e92..f8d183fd48 100644 --- a/keyboards/converter/sun_usb/led.c +++ b/keyboards/converter/sun_usb/led.c @@ -16,7 +16,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H -#include "protocol/serial.h" +#include "uart.h" void led_set(uint8_t usb_led) { @@ -27,6 +27,6 @@ void led_set(uint8_t usb_led) if (usb_led & (1<<USB_LED_CAPS_LOCK)) sun_led |= (1<<3); xprintf("LED: %02X\n", usb_led); - serial_send(0x0E); - serial_send(sun_led); + uart_write(0x0E); + uart_write(sun_led); } diff --git a/keyboards/converter/sun_usb/matrix.c b/keyboards/converter/sun_usb/matrix.c index 21f45111ec..e28d165d52 100644 --- a/keyboards/converter/sun_usb/matrix.c +++ b/keyboards/converter/sun_usb/matrix.c @@ -16,7 +16,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H -#include "protocol/serial.h" +#include "uart.h" /* * Matrix Array usage: @@ -38,8 +38,6 @@ static uint8_t matrix[MATRIX_ROWS]; #define ROW(code) ((code>>3)&0xF) #define COL(code) (code&0x07) -static bool is_modified = false; - __attribute__ ((weak)) void matrix_init_kb(void) { matrix_init_user(); @@ -76,7 +74,7 @@ void matrix_init(void) /* PORTD |= (1<<6); */ debug_enable = true; - serial_init(); + uart_init(1200); // initialize matrix state: all keys off for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; @@ -86,12 +84,12 @@ void matrix_init(void) /* print("Reseting "); */ /* while (1) { */ /* print("."); */ - /* while (serial_recv()); */ - /* serial_send(0x01); */ + /* while (uart_read()); */ + /* uart_write(0x01); */ /* _delay_ms(500); */ - /* if (serial_recv() == 0xFF) { */ + /* if (uart_read() == 0xFF) { */ /* _delay_ms(500); */ - /* if (serial_recv() == 0x04) */ + /* if (uart_read() == 0x04) */ /* break; */ /* } */ /* } */ @@ -106,7 +104,7 @@ void matrix_init(void) uint8_t matrix_scan(void) { uint8_t code; - code = serial_recv(); + code = uart_read(); if (!code) return 0; debug_hex(code); debug(" "); @@ -115,7 +113,7 @@ uint8_t matrix_scan(void) case 0xFF: // reset success: FF 04 print("reset: "); _delay_ms(500); - code = serial_recv(); + code = uart_read(); xprintf("%02X\n", code); if (code == 0x04) { // LED status @@ -125,12 +123,12 @@ uint8_t matrix_scan(void) case 0xFE: // layout: FE <layout> print("layout: "); _delay_ms(500); - xprintf("%02X\n", serial_recv()); + xprintf("%02X\n", uart_read()); return 0; case 0x7E: // reset fail: 7E 01 print("reset fail: "); _delay_ms(500); - xprintf("%02X\n", serial_recv()); + xprintf("%02X\n", uart_read()); return 0; case 0x7F: // all keys up @@ -154,11 +152,6 @@ uint8_t matrix_scan(void) return code; } -bool matrix_is_modified(void) -{ - return is_modified; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/converter/sun_usb/post_rules.mk b/keyboards/converter/sun_usb/post_rules.mk deleted file mode 100644 index 2ea1f0a5bf..0000000000 --- a/keyboards/converter/sun_usb/post_rules.mk +++ /dev/null @@ -1,6 +0,0 @@ -ifdef HARDWARE_SERIAL - SRC += protocol/serial_uart.c - OPT_DEFS += -DHARDWARE_SERIAL -else - SRC += protocol/serial_soft.c -endif diff --git a/keyboards/converter/sun_usb/rules.mk b/keyboards/converter/sun_usb/rules.mk index 2f2ddde1d0..d25bcc7ffa 100644 --- a/keyboards/converter/sun_usb/rules.mk +++ b/keyboards/converter/sun_usb/rules.mk @@ -20,5 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. CUSTOM_MATRIX = yes SRC += matrix.c led.c +QUANTUM_LIB_SRC += uart.c DEFAULT_FOLDER = converter/sun_usb/type5 diff --git a/keyboards/converter/usb_usb/custom_matrix.cpp b/keyboards/converter/usb_usb/custom_matrix.cpp index 296f7fcd02..91986f6eb9 100644 --- a/keyboards/converter/usb_usb/custom_matrix.cpp +++ b/keyboards/converter/usb_usb/custom_matrix.cpp @@ -192,10 +192,6 @@ extern "C" return 1; } - bool matrix_is_modified(void) { - return matrix_is_mod; - } - bool matrix_is_on(uint8_t row, uint8_t col) { uint8_t code = CODE(row, col); diff --git a/keyboards/bat43/.noci b/keyboards/dailycraft/bat43/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/bat43/.noci +++ b/keyboards/dailycraft/bat43/.noci diff --git a/keyboards/bat43/bat43.c b/keyboards/dailycraft/bat43/bat43.c index 5d52c672b6..5d52c672b6 100644 --- a/keyboards/bat43/bat43.c +++ b/keyboards/dailycraft/bat43/bat43.c diff --git a/keyboards/bat43/bat43.h b/keyboards/dailycraft/bat43/bat43.h index 42d44107b4..046788a0a1 100644 --- a/keyboards/bat43/bat43.h +++ b/keyboards/dailycraft/bat43/bat43.h @@ -1,9 +1,9 @@ #pragma once -#ifdef KEYBOARD_bat43_rev1 +#ifdef KEYBOARD_dailycraft_bat43_rev1 #include "rev1.h" #endif -#ifdef KEYBOARD_bat43_rev2 +#ifdef KEYBOARD_dailycraft_bat43_rev2 #include "rev2.h" #endif diff --git a/keyboards/bat43/config.h b/keyboards/dailycraft/bat43/config.h index 19b485fd16..19b485fd16 100644 --- a/keyboards/bat43/config.h +++ b/keyboards/dailycraft/bat43/config.h diff --git a/keyboards/bat43/keymaps/default/keymap.c b/keyboards/dailycraft/bat43/keymaps/default/keymap.c index 5e4faccf98..5e4faccf98 100644 --- a/keyboards/bat43/keymaps/default/keymap.c +++ b/keyboards/dailycraft/bat43/keymaps/default/keymap.c diff --git a/keyboards/bat43/keymaps/default/readme.md b/keyboards/dailycraft/bat43/keymaps/default/readme.md index f72376d89e..f72376d89e 100644 --- a/keyboards/bat43/keymaps/default/readme.md +++ b/keyboards/dailycraft/bat43/keymaps/default/readme.md diff --git a/keyboards/bat43/keymaps/via/keymap.c b/keyboards/dailycraft/bat43/keymaps/via/keymap.c index 0bd07b6017..0bd07b6017 100644 --- a/keyboards/bat43/keymaps/via/keymap.c +++ b/keyboards/dailycraft/bat43/keymaps/via/keymap.c diff --git a/keyboards/bat43/keymaps/via/readme.md b/keyboards/dailycraft/bat43/keymaps/via/readme.md index f72376d89e..f72376d89e 100644 --- a/keyboards/bat43/keymaps/via/readme.md +++ b/keyboards/dailycraft/bat43/keymaps/via/readme.md diff --git a/keyboards/bat43/keymaps/via/rules.mk b/keyboards/dailycraft/bat43/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/bat43/keymaps/via/rules.mk +++ b/keyboards/dailycraft/bat43/keymaps/via/rules.mk diff --git a/keyboards/bat43/readme.md b/keyboards/dailycraft/bat43/readme.md index 7097aa7af5..6b58aa5ca3 100644 --- a/keyboards/bat43/readme.md +++ b/keyboards/dailycraft/bat43/readme.md @@ -6,10 +6,21 @@ A 43-key keyboard. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: bat43 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make bat43:default + make dailycraft/bat43:default + +Flashing example for this keyboard: + + make dailycraft/bat43:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/bat43/rev1/.noci b/keyboards/dailycraft/bat43/rev1/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/bat43/rev1/.noci +++ b/keyboards/dailycraft/bat43/rev1/.noci diff --git a/keyboards/bat43/rev1/info.json b/keyboards/dailycraft/bat43/rev1/info.json index 0384bb5feb..0384bb5feb 100644 --- a/keyboards/bat43/rev1/info.json +++ b/keyboards/dailycraft/bat43/rev1/info.json diff --git a/keyboards/bat43/rev1/rev1.c b/keyboards/dailycraft/bat43/rev1/rev1.c index cff7598740..cff7598740 100644 --- a/keyboards/bat43/rev1/rev1.c +++ b/keyboards/dailycraft/bat43/rev1/rev1.c diff --git a/keyboards/bat43/rev1/rev1.h b/keyboards/dailycraft/bat43/rev1/rev1.h index cf21486a9e..cf21486a9e 100644 --- a/keyboards/bat43/rev1/rev1.h +++ b/keyboards/dailycraft/bat43/rev1/rev1.h diff --git a/keyboards/bat43/rev1/rules.mk b/keyboards/dailycraft/bat43/rev1/rules.mk index 8b13789179..8b13789179 100644 --- a/keyboards/bat43/rev1/rules.mk +++ b/keyboards/dailycraft/bat43/rev1/rules.mk diff --git a/keyboards/bat43/rev2/.noci b/keyboards/dailycraft/bat43/rev2/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/bat43/rev2/.noci +++ b/keyboards/dailycraft/bat43/rev2/.noci diff --git a/keyboards/bat43/rev2/info.json b/keyboards/dailycraft/bat43/rev2/info.json index 352d9a6beb..352d9a6beb 100644 --- a/keyboards/bat43/rev2/info.json +++ b/keyboards/dailycraft/bat43/rev2/info.json diff --git a/keyboards/bat43/rev2/rev2.c b/keyboards/dailycraft/bat43/rev2/rev2.c index cffc0acd32..cffc0acd32 100644 --- a/keyboards/bat43/rev2/rev2.c +++ b/keyboards/dailycraft/bat43/rev2/rev2.c diff --git a/keyboards/bat43/rev2/rev2.h b/keyboards/dailycraft/bat43/rev2/rev2.h index f84cdbaa4d..f84cdbaa4d 100644 --- a/keyboards/bat43/rev2/rev2.h +++ b/keyboards/dailycraft/bat43/rev2/rev2.h diff --git a/keyboards/bat43/rev2/rules.mk b/keyboards/dailycraft/bat43/rev2/rules.mk index 8b13789179..8b13789179 100644 --- a/keyboards/bat43/rev2/rules.mk +++ b/keyboards/dailycraft/bat43/rev2/rules.mk diff --git a/keyboards/bat43/rules.mk b/keyboards/dailycraft/bat43/rules.mk index 7bd7394e4f..c2e1c5755f 100644 --- a/keyboards/bat43/rules.mk +++ b/keyboards/dailycraft/bat43/rules.mk @@ -17,4 +17,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -DEFAULT_FOLDER = bat43/rev2 +DEFAULT_FOLDER = dailycraft/bat43/rev2 diff --git a/keyboards/claw44/.noci b/keyboards/dailycraft/claw44/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/claw44/.noci +++ b/keyboards/dailycraft/claw44/.noci diff --git a/keyboards/claw44/claw44.c b/keyboards/dailycraft/claw44/claw44.c index d87103065c..d87103065c 100644 --- a/keyboards/claw44/claw44.c +++ b/keyboards/dailycraft/claw44/claw44.c diff --git a/keyboards/claw44/claw44.h b/keyboards/dailycraft/claw44/claw44.h index 4ca25fcb2b..76ecda6e90 100644 --- a/keyboards/claw44/claw44.h +++ b/keyboards/dailycraft/claw44/claw44.h @@ -1,5 +1,5 @@ #pragma once -#ifdef KEYBOARD_claw44_rev1 +#ifdef KEYBOARD_dailycraft_claw44_rev1 #include "rev1.h" #endif diff --git a/keyboards/claw44/config.h b/keyboards/dailycraft/claw44/config.h index 0bd74ff833..0bd74ff833 100644 --- a/keyboards/claw44/config.h +++ b/keyboards/dailycraft/claw44/config.h diff --git a/keyboards/claw44/keymaps/default/config.h b/keyboards/dailycraft/claw44/keymaps/default/config.h index 98469e4ccf..98469e4ccf 100644 --- a/keyboards/claw44/keymaps/default/config.h +++ b/keyboards/dailycraft/claw44/keymaps/default/config.h diff --git a/keyboards/claw44/keymaps/default/keymap.c b/keyboards/dailycraft/claw44/keymaps/default/keymap.c index 204c0c94e6..204c0c94e6 100644 --- a/keyboards/claw44/keymaps/default/keymap.c +++ b/keyboards/dailycraft/claw44/keymaps/default/keymap.c diff --git a/keyboards/claw44/keymaps/oled/config.h b/keyboards/dailycraft/claw44/keymaps/oled/config.h index 5379ce677d..5379ce677d 100644 --- a/keyboards/claw44/keymaps/oled/config.h +++ b/keyboards/dailycraft/claw44/keymaps/oled/config.h diff --git a/keyboards/claw44/keymaps/oled/keymap.c b/keyboards/dailycraft/claw44/keymaps/oled/keymap.c index 1778ac6167..1778ac6167 100644 --- a/keyboards/claw44/keymaps/oled/keymap.c +++ b/keyboards/dailycraft/claw44/keymaps/oled/keymap.c diff --git a/keyboards/claw44/keymaps/oled/rules.mk b/keyboards/dailycraft/claw44/keymaps/oled/rules.mk index d34d066ded..d34d066ded 100644 --- a/keyboards/claw44/keymaps/oled/rules.mk +++ b/keyboards/dailycraft/claw44/keymaps/oled/rules.mk diff --git a/keyboards/claw44/keymaps/via/config.h b/keyboards/dailycraft/claw44/keymaps/via/config.h index 98469e4ccf..98469e4ccf 100644 --- a/keyboards/claw44/keymaps/via/config.h +++ b/keyboards/dailycraft/claw44/keymaps/via/config.h diff --git a/keyboards/claw44/keymaps/via/keymap.c b/keyboards/dailycraft/claw44/keymaps/via/keymap.c index 5373b76876..5373b76876 100644 --- a/keyboards/claw44/keymaps/via/keymap.c +++ b/keyboards/dailycraft/claw44/keymaps/via/keymap.c diff --git a/keyboards/claw44/keymaps/via/rules.mk b/keyboards/dailycraft/claw44/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/claw44/keymaps/via/rules.mk +++ b/keyboards/dailycraft/claw44/keymaps/via/rules.mk diff --git a/keyboards/claw44/lib/glcdfont.c b/keyboards/dailycraft/claw44/lib/glcdfont.c index 9fa1c806aa..9fa1c806aa 100644 --- a/keyboards/claw44/lib/glcdfont.c +++ b/keyboards/dailycraft/claw44/lib/glcdfont.c diff --git a/keyboards/claw44/readme.md b/keyboards/dailycraft/claw44/readme.md index 7e72e08971..e533bd7c82 100644 --- a/keyboards/claw44/readme.md +++ b/keyboards/dailycraft/claw44/readme.md @@ -4,12 +4,23 @@ A split keyboard with 3x6 vertically staggered keys and 4 thumb keys. -Keyboard Maintainer: [@yfuku_](https://twitter.com/yfuku_) -Hardware Supported: Claw44 PCB, ProMicro -Hardware Availability: https://yfuku.booth.pm/ +* Keyboard Maintainer: [yfuku](https://github.com/yfuku) +* Hardware Supported: Claw44 PCB, ProMicro +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make claw44:default + make dailycraft/claw44:default + +Flashing example for this keyboard: + + make dailycraft/claw44:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/claw44/rev1/.noci b/keyboards/dailycraft/claw44/rev1/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/claw44/rev1/.noci +++ b/keyboards/dailycraft/claw44/rev1/.noci diff --git a/keyboards/claw44/rev1/config.h b/keyboards/dailycraft/claw44/rev1/config.h index 8116b605cd..8116b605cd 100644 --- a/keyboards/claw44/rev1/config.h +++ b/keyboards/dailycraft/claw44/rev1/config.h diff --git a/keyboards/claw44/rev1/info.json b/keyboards/dailycraft/claw44/rev1/info.json index 3301e7d2ec..3301e7d2ec 100644 --- a/keyboards/claw44/rev1/info.json +++ b/keyboards/dailycraft/claw44/rev1/info.json diff --git a/keyboards/claw44/rev1/readme.md b/keyboards/dailycraft/claw44/rev1/readme.md index 5ad967af80..5ad967af80 100644 --- a/keyboards/claw44/rev1/readme.md +++ b/keyboards/dailycraft/claw44/rev1/readme.md diff --git a/keyboards/claw44/rev1/rev1.c b/keyboards/dailycraft/claw44/rev1/rev1.c index 520a869e57..520a869e57 100644 --- a/keyboards/claw44/rev1/rev1.c +++ b/keyboards/dailycraft/claw44/rev1/rev1.c diff --git a/keyboards/claw44/rev1/rev1.h b/keyboards/dailycraft/claw44/rev1/rev1.h index 9a05977153..9a05977153 100644 --- a/keyboards/claw44/rev1/rev1.h +++ b/keyboards/dailycraft/claw44/rev1/rev1.h diff --git a/keyboards/claw44/rev1/rules.mk b/keyboards/dailycraft/claw44/rev1/rules.mk index a66eb7d352..a66eb7d352 100644 --- a/keyboards/claw44/rev1/rules.mk +++ b/keyboards/dailycraft/claw44/rev1/rules.mk diff --git a/keyboards/claw44/rules.mk b/keyboards/dailycraft/claw44/rules.mk index 6ba5e853fb..69c59f28e6 100644 --- a/keyboards/claw44/rules.mk +++ b/keyboards/dailycraft/claw44/rules.mk @@ -17,4 +17,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -DEFAULT_FOLDER = claw44/rev1 +DEFAULT_FOLDER = dailycraft/claw44/rev1 diff --git a/keyboards/owl8/config.h b/keyboards/dailycraft/owl8/config.h index d28fd9c927..d28fd9c927 100644 --- a/keyboards/owl8/config.h +++ b/keyboards/dailycraft/owl8/config.h diff --git a/keyboards/owl8/info.json b/keyboards/dailycraft/owl8/info.json index e50484ba90..e50484ba90 100644 --- a/keyboards/owl8/info.json +++ b/keyboards/dailycraft/owl8/info.json diff --git a/keyboards/owl8/keymaps/default/keymap.c b/keyboards/dailycraft/owl8/keymaps/default/keymap.c index e840263639..e840263639 100644 --- a/keyboards/owl8/keymaps/default/keymap.c +++ b/keyboards/dailycraft/owl8/keymaps/default/keymap.c diff --git a/keyboards/owl8/keymaps/default/readme.md b/keyboards/dailycraft/owl8/keymaps/default/readme.md index e0129daa2d..e0129daa2d 100644 --- a/keyboards/owl8/keymaps/default/readme.md +++ b/keyboards/dailycraft/owl8/keymaps/default/readme.md diff --git a/keyboards/owl8/keymaps/via/keymap.c b/keyboards/dailycraft/owl8/keymaps/via/keymap.c index 6e3f6ea90b..6e3f6ea90b 100644 --- a/keyboards/owl8/keymaps/via/keymap.c +++ b/keyboards/dailycraft/owl8/keymaps/via/keymap.c diff --git a/keyboards/owl8/keymaps/via/readme.md b/keyboards/dailycraft/owl8/keymaps/via/readme.md index c4fa65987c..c4fa65987c 100644 --- a/keyboards/owl8/keymaps/via/readme.md +++ b/keyboards/dailycraft/owl8/keymaps/via/readme.md diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/via/rules.mk b/keyboards/dailycraft/owl8/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/via/rules.mk +++ b/keyboards/dailycraft/owl8/keymaps/via/rules.mk diff --git a/keyboards/owl8/owl8.c b/keyboards/dailycraft/owl8/owl8.c index a31289891a..a31289891a 100644 --- a/keyboards/owl8/owl8.c +++ b/keyboards/dailycraft/owl8/owl8.c diff --git a/keyboards/owl8/owl8.h b/keyboards/dailycraft/owl8/owl8.h index 5e561f580c..5e561f580c 100644 --- a/keyboards/owl8/owl8.h +++ b/keyboards/dailycraft/owl8/owl8.h diff --git a/keyboards/owl8/readme.md b/keyboards/dailycraft/owl8/readme.md index b40a5f35cb..c7fab17476 100644 --- a/keyboards/owl8/readme.md +++ b/keyboards/dailycraft/owl8/readme.md @@ -6,14 +6,21 @@ macropad * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: owl8 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make owl8:default + make dailycraft/owl8:default Flashing example for this keyboard: - make owl8:default:flash + make dailycraft/owl8:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/owl8/rules.mk b/keyboards/dailycraft/owl8/rules.mk index 284ea23e78..284ea23e78 100644 --- a/keyboards/owl8/rules.mk +++ b/keyboards/dailycraft/owl8/rules.mk diff --git a/keyboards/wings42/config.h b/keyboards/dailycraft/wings42/config.h index cfb6bf4ffc..cfb6bf4ffc 100644 --- a/keyboards/wings42/config.h +++ b/keyboards/dailycraft/wings42/config.h diff --git a/keyboards/wings42/rev2/readme.md b/keyboards/dailycraft/wings42/readme.md index 158372feb4..c919653397 100644 --- a/keyboards/wings42/rev2/readme.md +++ b/keyboards/dailycraft/wings42/readme.md @@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: wings42 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make wings42:default + make dailycraft/wings42:default Flashing example for this keyboard: - make wings42:default:flash + make dailycraft/wings42:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/) +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wings42/rev1/config.h b/keyboards/dailycraft/wings42/rev1/config.h index cfb4274921..cfb4274921 100644 --- a/keyboards/wings42/rev1/config.h +++ b/keyboards/dailycraft/wings42/rev1/config.h diff --git a/keyboards/wings42/rev1/keymaps/default/keymap.c b/keyboards/dailycraft/wings42/rev1/keymaps/default/keymap.c index 442ba5ed9f..442ba5ed9f 100644 --- a/keyboards/wings42/rev1/keymaps/default/keymap.c +++ b/keyboards/dailycraft/wings42/rev1/keymaps/default/keymap.c diff --git a/keyboards/wings42/rev1/keymaps/default/readme.md b/keyboards/dailycraft/wings42/rev1/keymaps/default/readme.md index d99098ad0c..d99098ad0c 100644 --- a/keyboards/wings42/rev1/keymaps/default/readme.md +++ b/keyboards/dailycraft/wings42/rev1/keymaps/default/readme.md diff --git a/keyboards/wings42/rev1/keymaps/via/keymap.c b/keyboards/dailycraft/wings42/rev1/keymaps/via/keymap.c index 442ba5ed9f..442ba5ed9f 100644 --- a/keyboards/wings42/rev1/keymaps/via/keymap.c +++ b/keyboards/dailycraft/wings42/rev1/keymaps/via/keymap.c diff --git a/keyboards/owl8/keymaps/via/rules.mk b/keyboards/dailycraft/wings42/rev1/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/owl8/keymaps/via/rules.mk +++ b/keyboards/dailycraft/wings42/rev1/keymaps/via/rules.mk diff --git a/keyboards/wings42/rev1_extkeys/readme.md b/keyboards/dailycraft/wings42/rev1/readme.md index 7be464a141..959052c41d 100644 --- a/keyboards/wings42/rev1_extkeys/readme.md +++ b/keyboards/dailycraft/wings42/rev1/readme.md @@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: wings42 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make make wings42/rev1_extkeys:default + make dailycraft/wings42/rev1:default Flashing example for this keyboard: - make make wings42/rev1_extkeys:default:flash + make dailycraft/wings42/rev1:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/) +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wings42/rev1/rev1.c b/keyboards/dailycraft/wings42/rev1/rev1.c index dccf24c746..dccf24c746 100644 --- a/keyboards/wings42/rev1/rev1.c +++ b/keyboards/dailycraft/wings42/rev1/rev1.c diff --git a/keyboards/wings42/rev1/rev1.h b/keyboards/dailycraft/wings42/rev1/rev1.h index cd6e35a711..cd6e35a711 100644 --- a/keyboards/wings42/rev1/rev1.h +++ b/keyboards/dailycraft/wings42/rev1/rev1.h diff --git a/keyboards/wings42/rev1/rules.mk b/keyboards/dailycraft/wings42/rev1/rules.mk index e69de29bb2..e69de29bb2 100644 --- a/keyboards/wings42/rev1/rules.mk +++ b/keyboards/dailycraft/wings42/rev1/rules.mk diff --git a/keyboards/wings42/rev1_extkeys/config.h b/keyboards/dailycraft/wings42/rev1_extkeys/config.h index f0f04eca59..f0f04eca59 100644 --- a/keyboards/wings42/rev1_extkeys/config.h +++ b/keyboards/dailycraft/wings42/rev1_extkeys/config.h diff --git a/keyboards/wings42/rev1_extkeys/keymaps/default/keymap.c b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/default/keymap.c index 64a2b00c31..64a2b00c31 100644 --- a/keyboards/wings42/rev1_extkeys/keymaps/default/keymap.c +++ b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/default/keymap.c diff --git a/keyboards/wings42/rev1_extkeys/keymaps/default/readme.md b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/default/readme.md index d99098ad0c..d99098ad0c 100644 --- a/keyboards/wings42/rev1_extkeys/keymaps/default/readme.md +++ b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/default/readme.md diff --git a/keyboards/wings42/rev1_extkeys/keymaps/via/keymap.c b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/via/keymap.c index 97c77e182b..97c77e182b 100644 --- a/keyboards/wings42/rev1_extkeys/keymaps/via/keymap.c +++ b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/via/keymap.c diff --git a/keyboards/wings42/rev1/keymaps/via/rules.mk b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/wings42/rev1/keymaps/via/rules.mk +++ b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/via/rules.mk diff --git a/keyboards/wings42/readme.md b/keyboards/dailycraft/wings42/rev1_extkeys/readme.md index fc71d58ab6..4a34063ad4 100644 --- a/keyboards/wings42/readme.md +++ b/keyboards/dailycraft/wings42/rev1_extkeys/readme.md @@ -6,14 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: wings42 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make wings42:default + make dailycraft/wings42/rev1_extkeys:default Flashing example for this keyboard: - make wings42:default:flash + make dailycraft/wings42/rev1_extkeys:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wings42/rev1_extkeys/rev1_extkeys.c b/keyboards/dailycraft/wings42/rev1_extkeys/rev1_extkeys.c index 3d0d203704..3d0d203704 100644 --- a/keyboards/wings42/rev1_extkeys/rev1_extkeys.c +++ b/keyboards/dailycraft/wings42/rev1_extkeys/rev1_extkeys.c diff --git a/keyboards/wings42/rev1_extkeys/rev1_extkeys.h b/keyboards/dailycraft/wings42/rev1_extkeys/rev1_extkeys.h index 2ad58047f1..2ad58047f1 100644 --- a/keyboards/wings42/rev1_extkeys/rev1_extkeys.h +++ b/keyboards/dailycraft/wings42/rev1_extkeys/rev1_extkeys.h diff --git a/keyboards/wings42/rev1_extkeys/rules.mk b/keyboards/dailycraft/wings42/rev1_extkeys/rules.mk index e69de29bb2..e69de29bb2 100644 --- a/keyboards/wings42/rev1_extkeys/rules.mk +++ b/keyboards/dailycraft/wings42/rev1_extkeys/rules.mk diff --git a/keyboards/wings42/rev2/config.h b/keyboards/dailycraft/wings42/rev2/config.h index 836833718c..836833718c 100644 --- a/keyboards/wings42/rev2/config.h +++ b/keyboards/dailycraft/wings42/rev2/config.h diff --git a/keyboards/wings42/rev2/keymaps/default/keymap.c b/keyboards/dailycraft/wings42/rev2/keymaps/default/keymap.c index df572a6f5a..df572a6f5a 100644 --- a/keyboards/wings42/rev2/keymaps/default/keymap.c +++ b/keyboards/dailycraft/wings42/rev2/keymaps/default/keymap.c diff --git a/keyboards/wings42/rev2/keymaps/default/readme.md b/keyboards/dailycraft/wings42/rev2/keymaps/default/readme.md index d99098ad0c..d99098ad0c 100644 --- a/keyboards/wings42/rev2/keymaps/default/readme.md +++ b/keyboards/dailycraft/wings42/rev2/keymaps/default/readme.md diff --git a/keyboards/wings42/rev2/keymaps/via/config.h b/keyboards/dailycraft/wings42/rev2/keymaps/via/config.h index 3e0c8d146a..3e0c8d146a 100644 --- a/keyboards/wings42/rev2/keymaps/via/config.h +++ b/keyboards/dailycraft/wings42/rev2/keymaps/via/config.h diff --git a/keyboards/wings42/rev2/keymaps/via/keymap.c b/keyboards/dailycraft/wings42/rev2/keymaps/via/keymap.c index e6b4ef840a..e6b4ef840a 100644 --- a/keyboards/wings42/rev2/keymaps/via/keymap.c +++ b/keyboards/dailycraft/wings42/rev2/keymaps/via/keymap.c diff --git a/keyboards/wings42/rev2/keymaps/via/rules.mk b/keyboards/dailycraft/wings42/rev2/keymaps/via/rules.mk index eea5e1e2a2..eea5e1e2a2 100644 --- a/keyboards/wings42/rev2/keymaps/via/rules.mk +++ b/keyboards/dailycraft/wings42/rev2/keymaps/via/rules.mk diff --git a/keyboards/wings42/rev1/readme.md b/keyboards/dailycraft/wings42/rev2/readme.md index 4ddfe3e83c..c919653397 100644 --- a/keyboards/wings42/rev1/readme.md +++ b/keyboards/dailycraft/wings42/rev2/readme.md @@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: wings42 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make wings42/rev1:default + make dailycraft/wings42:default Flashing example for this keyboard: - make wings42/rev1:default:flash + make dailycraft/wings42:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/) +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wings42/rev2/rev2.c b/keyboards/dailycraft/wings42/rev2/rev2.c index 96aa6cd314..96aa6cd314 100644 --- a/keyboards/wings42/rev2/rev2.c +++ b/keyboards/dailycraft/wings42/rev2/rev2.c diff --git a/keyboards/wings42/rev2/rev2.h b/keyboards/dailycraft/wings42/rev2/rev2.h index 4720592264..4720592264 100644 --- a/keyboards/wings42/rev2/rev2.h +++ b/keyboards/dailycraft/wings42/rev2/rev2.h diff --git a/keyboards/wings42/rev2/rules.mk b/keyboards/dailycraft/wings42/rev2/rules.mk index e69de29bb2..e69de29bb2 100644 --- a/keyboards/wings42/rev2/rules.mk +++ b/keyboards/dailycraft/wings42/rev2/rules.mk diff --git a/keyboards/wings42/rules.mk b/keyboards/dailycraft/wings42/rules.mk index 74e894efec..94459dbcc5 100644 --- a/keyboards/wings42/rules.mk +++ b/keyboards/dailycraft/wings42/rules.mk @@ -19,4 +19,4 @@ AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes -DEFAULT_FOLDER = wings42/rev2 +DEFAULT_FOLDER = dailycraft/wings42/rev2 diff --git a/keyboards/wings42/wings42.c b/keyboards/dailycraft/wings42/wings42.c index 824b6cfbb6..824b6cfbb6 100644 --- a/keyboards/wings42/wings42.c +++ b/keyboards/dailycraft/wings42/wings42.c diff --git a/keyboards/wings42/wings42.h b/keyboards/dailycraft/wings42/wings42.h index 9412b7117a..d839f04884 100644 --- a/keyboards/wings42/wings42.h +++ b/keyboards/dailycraft/wings42/wings42.h @@ -18,13 +18,13 @@ #include "quantum.h" -#ifdef KEYBOARD_wings42_rev1 +#ifdef KEYBOARD_dailycraft_wings42_rev1 # include "rev1.h" #endif -#ifdef KEYBOARD_wings42_rev1_extkeys +#ifdef KEYBOARD_dailycraft_wings42_rev1_extkeys # include "rev1_extkeys.h" #endif -#ifdef KEYBOARD_wings42_rev2 +#ifdef KEYBOARD_dailycraft_wings42_rev2 # include "rev2.h" #endif diff --git a/keyboards/dc01/arrow/matrix.c b/keyboards/dc01/arrow/matrix.c index 0102ad0fa4..b69e147914 100644 --- a/keyboards/dc01/arrow/matrix.c +++ b/keyboards/dc01/arrow/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c index bf5aba8497..084978a1fd 100644 --- a/keyboards/dc01/left/matrix.c +++ b/keyboards/dc01/left/matrix.c @@ -230,14 +230,6 @@ if (i2c_transaction(SLAVE_I2C_ADDRESS_NUMPAD, 0x1FFFF, 11)) { return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/numpad/matrix.c b/keyboards/dc01/numpad/matrix.c index 38130114eb..e8e2a1b14a 100644 --- a/keyboards/dc01/numpad/matrix.c +++ b/keyboards/dc01/numpad/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/right/matrix.c b/keyboards/dc01/right/matrix.c index 544c8dc538..2509bd7d4c 100644 --- a/keyboards/dc01/right/matrix.c +++ b/keyboards/dc01/right/matrix.c @@ -206,14 +206,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dichotomy/config.h b/keyboards/dichotomy/config.h index 03e19b1388..40e7f18e6f 100644 --- a/keyboards/dichotomy/config.h +++ b/keyboards/dichotomy/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/dichotomy/dichotomy.c b/keyboards/dichotomy/dichotomy.c index 967d7e603c..afd52cc8b3 100755 --- a/keyboards/dichotomy/dichotomy.c +++ b/keyboards/dichotomy/dichotomy.c @@ -1,11 +1,13 @@ #include "dichotomy.h" +//#include "uart.h" + void pointing_device_task(void){ /*report_mouse_t currentReport = {}; uint32_t timeout = 0; //the m character requests the RF slave to send the mouse report - SERIAL_UART_DATA = 'm'; + uart_write('m'); //trust the external inputs completely, erase old data uint8_t uart_data[5] = {0}; @@ -15,7 +17,7 @@ void pointing_device_task(void){ //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while(!uart_available()){ timeout++; if (timeout > 10000){ xprintf("\r\nTIMED OUT"); @@ -23,7 +25,7 @@ void pointing_device_task(void){ } } xprintf("\r\nGOT DATA for %d",i); - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, bytes 1-4 are movement and scroll diff --git a/keyboards/dichotomy/matrix.c b/keyboards/dichotomy/matrix.c index ed83bd452c..806b66d498 100755 --- a/keyboards/dichotomy/matrix.c +++ b/keyboards/dichotomy/matrix.c @@ -29,7 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "dichotomy.h" #include "pointing_device.h" #include "report.h" -#include "protocol/serial.h" +#include "uart.h" #if (MATRIX_COLS <= 8) # define print_matrix_header() print("\nr/c 01234567\n") @@ -94,7 +94,7 @@ uint8_t matrix_cols(void) { void matrix_init(void) { matrix_init_quantum(); - serial_init(); + uart_init(1000000); } uint8_t matrix_scan(void) @@ -104,7 +104,7 @@ uint8_t matrix_scan(void) uint32_t timeout = 0; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -114,14 +114,14 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while(!uart_available()){ timeout++; if (timeout > 10000){ xprintf("\r\nTime out in keyboard."); break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 diff --git a/keyboards/dichotomy/rules.mk b/keyboards/dichotomy/rules.mk index 2b5eb0360c..a6029e3dbf 100755 --- a/keyboards/dichotomy/rules.mk +++ b/keyboards/dichotomy/rules.mk @@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality # # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/dm9records/ergoinu/config.h b/keyboards/dm9records/ergoinu/config.h index 113eaf9f76..89ea9e7903 100644 --- a/keyboards/dm9records/ergoinu/config.h +++ b/keyboards/dm9records/ergoinu/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #include "config_common.h" -#include "serial_config.h" /* USB Device descriptor parameter VID & PID are lisenced from microchip sublisence program, Don't use other project! */ @@ -30,11 +29,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MANUFACTURER Dm9Records #define PRODUCT ergoinu -#define TAPPING_FORCE_HOLD -#define TAPPING_TERM 100 - #define USE_SERIAL +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D2 + /* Select hand configuration */ #define MASTER_LEFT // #define MASTER_RIGHT @@ -49,6 +48,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COLS 7 #define MATRIX_COL_PINS { B4, E6, D7, C6, D4, F5, F4 } +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dm9records/ergoinu/ergoinu.c b/keyboards/dm9records/ergoinu/ergoinu.c index c6d099a148..a01ac0a25c 100644 --- a/keyboards/dm9records/ergoinu/ergoinu.c +++ b/keyboards/dm9records/ergoinu/ergoinu.c @@ -1 +1,18 @@ +/* +Copyright 2018 Takuya Urakawa<twitter:@hsgw> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include "ergoinu.h" diff --git a/keyboards/dm9records/ergoinu/ergoinu.h b/keyboards/dm9records/ergoinu/ergoinu.h index 43249a8440..c275d3fa27 100644 --- a/keyboards/dm9records/ergoinu/ergoinu.h +++ b/keyboards/dm9records/ergoinu/ergoinu.h @@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "quantum.h" -#ifdef RGBLIGHT_ENABLE -#include "ws2812.h" -#endif - #define LAYOUT( \ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ L07, L08, L09, L10, L11, L12, L13, R07, R08, R09, R10, R11, R12, R13, \ @@ -41,4 +37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. { R27, R26, R25, R24, R23, R22, R21 }, \ { KC_NO, KC_NO, R32, R31, R30, R29, R28 } \ } - diff --git a/keyboards/dm9records/ergoinu/keymaps/default/config.h b/keyboards/dm9records/ergoinu/keymaps/default/config.h deleted file mode 100644 index bb266f25e7..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2018 Takuya Urakawa <Twitter:@hsgw> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c index 00c5da820d..862b538829 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c +++ b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c @@ -5,14 +5,6 @@ extern rgblight_config_t rgblight_config; #endif -#define JA_CLON KC_QUOT // : and + -#define JA_AT KC_LBRC // @ and ` -#define JA_HAT KC_EQL // ^ and ~ -#define JA_ENUN KC_RO // \ and _ (EN mark and UNder score) -#define JA_ENVL KC_JYEN // \ and | (EN mark and Vertical Line) -#define JA_LBRC KC_RBRC // [ and { -#define JA_RBRC KC_BSLS // ] and } - enum LAYER_NO { BASE = 0, META, @@ -24,33 +16,30 @@ enum CUSTOM_KEYCODES { RGB_TYPE, }; -// Fillers to make layering more clear -#define ______ KC_TRNS -#define XXXXXX KC_NO - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, - KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, + KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, MO(META),KC_LALT, KC_LGUI, KC_ENT, KC_SPC, KC_ENT, KC_BSPC, KC_RGUI, KC_RALT, MO(META) ), [META] = LAYOUT( MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, - ______, KC_CAPS, ______, ______, ______, ______, ______, ______, ______, ______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, - ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RGHT, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______ + _______, KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [CONF] = LAYOUT( - ______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX + + [CONF] = LAYOUT( + _______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ) }; diff --git a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk deleted file mode 100644 index 8567c2ae2e..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes - -# Uncomment these for debugging -# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) -# $(info -- OPT_DEFS=$(OPT_DEFS)) -# $(info ) diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h b/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h deleted file mode 100644 index bb266f25e7..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2018 Takuya Urakawa <Twitter:@hsgw> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c index a9a9f71f4d..32289c44db 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c +++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c @@ -24,10 +24,6 @@ enum CUSTOM_KEYCODES { RGB_TYPE, }; -// Fillers to make layering more clear -#define ______ KC_TRNS -#define XXXXXX KC_NO - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT( @@ -38,20 +34,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(META),KC_LALT, KC_ZKHK, KC_BSPC, KC_SPC, KC_ENT, KC_BSPC, KC_MHEN, KC_KANA, MO(META) ), - [META] = LAYOUT( MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, - ______, KC_CAPS, ______, KC_UP, ______, ______, ______, ______, ______, ______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, - ______, KC_LEFT, KC_DOWN, KC_RGHT, ______, ______, ______, ______, ______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RGHT, - ______, ______, KC_RGUI, KC_DEL, KC_ENT, ______, KC_DEL, KC_HENK, KC_LGUI, ______ + _______, KC_CAPS, _______, KC_UP, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, + _______, _______, KC_RGUI, KC_DEL, KC_ENT, _______, KC_DEL, KC_HENK, KC_LGUI, _______ ), - [CONF] = LAYOUT( - ______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX + + [CONF] = LAYOUT( + _______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ) }; diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk deleted file mode 100644 index 97154be636..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes - -# Uncomment these for debugging -# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) -# $(info -- OPT_DEFS=$(OPT_DEFS)) -# $(info ) diff --git a/keyboards/dm9records/ergoinu/matrix.c b/keyboards/dm9records/ergoinu/matrix.c deleted file mode 100644 index b1c58f88fe..0000000000 --- a/keyboards/dm9records/ergoinu/matrix.c +++ /dev/null @@ -1,292 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#include "serial.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - - #ifdef DISABLE_PROMICRO_LEDs - writePinHigh(B0); - writePinHigh(D5); - #endif - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) { - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - int ret=serial_update_buffers(); - if (ret ) { -#ifndef DISABLE_PROMICRO_LEDs - if(ret==2) writePinLow(B0); -#endif - return 1; - } -#ifndef DISABLE_PROMICRO_LEDs - writePinHigh(B0); -#endif - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} - -uint8_t matrix_scan(void) { - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[offset+i] = serial_master_buffer[i]; - } - - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_master_buffer[i] = matrix[offset+i]; - } - - if( serial_transaction() ) { -#ifndef DISABLE_PROMICRO_LEDs - // turn on the indicator led when halves are disconnected - writePinLow(D5); -#endif - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { -#ifndef DISABLE_PROMICRO_LEDs - // turn off the indicator led on no error - writePinHigh(D5); -#endif - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/dm9records/ergoinu/post_rules.mk b/keyboards/dm9records/ergoinu/post_rules.mk deleted file mode 100644 index 02aa48104c..0000000000 --- a/keyboards/dm9records/ergoinu/post_rules.mk +++ /dev/null @@ -1,9 +0,0 @@ -ifneq ($(strip $(ERGOINU)),) - ifeq ($(findstring promicroled, $(ERGOINU)), promicroled) - DISABLE_PROMICRO_LEDs = no - endif -endif - -ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes) - OPT_DEFS += -DDISABLE_PROMICRO_LEDs -endif diff --git a/keyboards/dm9records/ergoinu/readme.md b/keyboards/dm9records/ergoinu/readme.md index de0a1c6c97..45f91dbac2 100644 --- a/keyboards/dm9records/ergoinu/readme.md +++ b/keyboards/dm9records/ergoinu/readme.md @@ -1,13 +1,12 @@ -ErgoInu -=== +# ErgoInu  An (Not Portable But Small) Ergonomic Split Keyboard. -Keyboard Maintainer: [hsgw](https://github.com/hsgw/) [twitter](https://twitter.com/hsgw) -Hardware Supported: Pro Micro -Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu) +* Keyboard Maintainer: [hsgw](https://github.com/hsgw/) [twitter](https://twitter.com/hsgw) +* Hardware Supported: Pro Micro +* Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/dm9records/ergoinu/rules.mk b/keyboards/dm9records/ergoinu/rules.mk index 0a634ee794..aba3644c9e 100644 --- a/keyboards/dm9records/ergoinu/rules.mk +++ b/keyboards/dm9records/ergoinu/rules.mk @@ -7,20 +7,14 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SUBPROJECT_rev1 = no -USE_I2C = no # i2c is not supported -CUSTOM_MATRIX = yes -SRC += matrix.c serial.c split_util.c - -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes +SPLIT_KEYBOARD = yes diff --git a/keyboards/dm9records/ergoinu/serial.c b/keyboards/dm9records/ergoinu/serial.c deleted file mode 100644 index 5919415877..0000000000 --- a/keyboards/dm9records/ergoinu/serial.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef USE_SERIAL - -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// Serial pulse period in microseconds. -#define SELECT_SERIAL_SPEED 1 -#if SELECT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #define READ_WRITE_START_ADJUST 23 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 50 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#else -#error Illegal Serial Speed -#endif - - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH 1 -#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input_with_pullup(); - -#if SERIAL_PIN_MASK == _BV(PD0) - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -#elif SERIAL_PIN_MASK == _BV(PD2) - // Enable INT2 - EIMSK |= _BV(INT2); - // Trigger on falling edge of INT2 - EICRA &= ~(_BV(ISC20) | _BV(ISC21)); -#else - #error unknown SERIAL_PIN_MASK value -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static -void sync_recv(void) { - for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - _delay_sub_us(READ_WRITE_START_ADJUST); - for ( uint8_t i = 0; i < 8; ++i) { - serial_delay_half1(); // read the middle of pulses - byte = (byte << 1) | serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 1<<7; - while( b ) { - if(data & b) { - serial_high(); - } else { - serial_low(); - } - b >>= 1; - serial_delay(); - } - serial_low(); // sync_send() / senc_recv() need raise edge -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - serial_output(); - - // slave send phase - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_slave_buffer[i]); - checksum += serial_slave_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // slave switch to input - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 - - // slave recive phase - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_master_buffer[i] = serial_read_byte(); - checksum_computed += serial_master_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } - - sync_recv(); //weit master output to high -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH); - - // wait for the slaves response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - sei(); - return 1; - } - - // master recive phase - // if the slave is present syncronize with it - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_slave_buffer[i] = serial_read_byte(); - checksum_computed += serial_slave_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if (checksum_computed != checksum_received) { - serial_output(); - serial_high(); - sei(); - return 2; - } - - // master switch to output - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); // 3 - serial_delay_half1(); //4 - - // master send phase - uint8_t checksum = 0; - - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_master_buffer[i]); - checksum += serial_master_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // always, release the line when not in use - sync_send(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/dm9records/ergoinu/serial.h b/keyboards/dm9records/ergoinu/serial.h deleted file mode 100644 index 67cf06ac6b..0000000000 --- a/keyboards/dm9records/ergoinu/serial.h +++ /dev/null @@ -1,24 +0,0 @@ -#pragma once - -#include <stdbool.h> - -// //////////////////////////////////////////// -// Need Soft Serial defines in serial_config.h -// //////////////////////////////////////////// -// ex. -// #define SERIAL_PIN_DDR DDRD -// #define SERIAL_PIN_PORT PORTD -// #define SERIAL_PIN_INPUT PIND -// #define SERIAL_PIN_MASK _BV(PD?) ?=0,2 -// #define SERIAL_PIN_INTERRUPT INT?_vect ?=0,2 -// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -// #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); diff --git a/keyboards/dm9records/ergoinu/serial_config.h b/keyboards/dm9records/ergoinu/serial_config.h deleted file mode 100644 index a16db684ca..0000000000 --- a/keyboards/dm9records/ergoinu/serial_config.h +++ /dev/null @@ -1,11 +0,0 @@ -#pragma once - -/* Soft Serial defines */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD2) -#define SERIAL_PIN_INTERRUPT INT2_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 diff --git a/keyboards/dm9records/ergoinu/split_util.c b/keyboards/dm9records/ergoinu/split_util.c deleted file mode 100644 index 0cbc2c69c4..0000000000 --- a/keyboards/dm9records/ergoinu/split_util.c +++ /dev/null @@ -1,56 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" - -#include "serial.h" - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - serial_master_init(); -} - -static void keyboard_slave_setup(void) { - serial_slave_init(); -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); -} diff --git a/keyboards/dm9records/ergoinu/split_util.h b/keyboards/dm9records/ergoinu/split_util.h deleted file mode 100644 index 11cfd5455a..0000000000 --- a/keyboards/dm9records/ergoinu/split_util.h +++ /dev/null @@ -1,12 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include "eeconfig.h" - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); diff --git a/keyboards/duck/jetfire/matrix.c b/keyboards/duck/jetfire/matrix.c index 2dd94a72ac..729fa6dd14 100644 --- a/keyboards/duck/jetfire/matrix.c +++ b/keyboards/duck/jetfire/matrix.c @@ -116,12 +116,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h b/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h index a7d95c51a9..d70f188178 100644 --- a/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h +++ b/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h @@ -21,7 +21,7 @@ #pragma once -#define CH_CFG_ST_FREQUENCY 10000 +#define CH_CFG_ST_FREQUENCY 1000 #define CH_CFG_ST_TIMEDELTA 0 diff --git a/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h b/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h index 6d67aa96aa..a24c1cee12 100644 --- a/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h +++ b/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h @@ -85,7 +85,7 @@ */ #define STM32_GPT_USE_TIM1 FALSE #define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM3 TRUE #define STM32_GPT_USE_TIM14 FALSE #define STM32_GPT_TIM1_IRQ_PRIORITY 2 #define STM32_GPT_TIM2_IRQ_PRIORITY 2 diff --git a/keyboards/durgod/dgk6x/config.h b/keyboards/durgod/dgk6x/config.h index 92673e5c24..a15ed86650 100644 --- a/keyboards/durgod/dgk6x/config.h +++ b/keyboards/durgod/dgk6x/config.h @@ -22,6 +22,9 @@ #define VENDOR_ID 0xD60D #define MANUFACTURER Hoksi Technology +#define USB_POLLING_INTERVAL_MS 1 +#define WAIT_US_TIMER GPTD3 + /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL diff --git a/keyboards/durgod/dgk6x/halconf.h b/keyboards/durgod/dgk6x/halconf.h index 1772f8e410..9c1c6e5280 100644 --- a/keyboards/durgod/dgk6x/halconf.h +++ b/keyboards/durgod/dgk6x/halconf.h @@ -19,4 +19,7 @@ #ifdef RGB_MATRIX_ENABLE #define HAL_USE_I2C TRUE #endif + +#define HAL_USE_GPT TRUE + #include_next <halconf.h> diff --git a/keyboards/durgod/k3x0/config.h b/keyboards/durgod/k3x0/config.h index ef73a71016..af543bb970 100644 --- a/keyboards/durgod/k3x0/config.h +++ b/keyboards/durgod/k3x0/config.h @@ -23,6 +23,9 @@ #define VENDOR_ID 0xD60D #define MANUFACTURER Hoksi Technology +#define USB_POLLING_INTERVAL_MS 1 +#define WAIT_US_TIMER GPTD3 + /* key matrix size (rows in specific keyboard variant) */ #define MATRIX_COLS 16 diff --git a/keyboards/durgod/k3x0/halconf.h b/keyboards/durgod/k3x0/halconf.h index fa20fe30a9..d2a9d8c7c0 100644 --- a/keyboards/durgod/k3x0/halconf.h +++ b/keyboards/durgod/k3x0/halconf.h @@ -19,4 +19,6 @@ #define HAL_USE_PAL TRUE #define PAL_USE_CALLBACKS TRUE +#define HAL_USE_GPT TRUE + #include_next <halconf.h> diff --git a/keyboards/ergodox_stm32/matrix.c b/keyboards/ergodox_stm32/matrix.c index 383bf9790a..094d4a9e0f 100644 --- a/keyboards/ergodox_stm32/matrix.c +++ b/keyboards/ergodox_stm32/matrix.c @@ -119,10 +119,6 @@ uint8_t matrix_scan(void) { return 0; } -bool matrix_is_modified(void) { - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); diff --git a/keyboards/ergotaco/matrix.c b/keyboards/ergotaco/matrix.c index e5af1c27fd..16300a7e4f 100644 --- a/keyboards/ergotaco/matrix.c +++ b/keyboards/ergotaco/matrix.c @@ -199,11 +199,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/gboards/gergoplex/matrix.c b/keyboards/gboards/gergoplex/matrix.c index 716390241a..a075b85725 100644 --- a/keyboards/gboards/gergoplex/matrix.c +++ b/keyboards/gboards/gergoplex/matrix.c @@ -152,11 +152,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } diff --git a/keyboards/georgi/matrix.c b/keyboards/georgi/matrix.c index 438412102b..7d635ad8d7 100644 --- a/keyboards/georgi/matrix.c +++ b/keyboards/georgi/matrix.c @@ -220,11 +220,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/gergo/matrix.c b/keyboards/gergo/matrix.c index 655e729356..443e97132b 100644 --- a/keyboards/gergo/matrix.c +++ b/keyboards/gergo/matrix.c @@ -273,11 +273,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h b/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h new file mode 100644 index 0000000000..fd8f1d6859 --- /dev/null +++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h @@ -0,0 +1,20 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#if defined(RGB_MATRIX_ENABLE) + #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR + // number of milliseconds to wait until turning off RGB automatically + #define RGB_DISABLE_TIMEOUT 300000 // 300 seconds / 5 min + // start fading out before getting disabled + // fading out is timed (depending on the rgb_matrix_config.speed) to have finished before reaching RGB_DISABLE_TIMEOUT + #define RGB_DISABLE_WITH_FADE_OUT + #define RGB_DISABLE_WHEN_USB_SUSPENDED + // number of milliseconds to wait until activating RGB idle effects + #define RGB_IDLE_TIMEOUT 4500 // 4.5 seconds + // activate breathe effect when idle + #define RGB_IDLE_BREATHE + // fade in when we have been suspended + #define RGB_FADE_IN +#endif diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c b/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c new file mode 100644 index 0000000000..d5b64c153a --- /dev/null +++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c @@ -0,0 +1,148 @@ +// Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>, +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +#include "vitoni.h" + +enum layer_names { + _BASE, + _MOV, + _RGB +}; + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Prt Rotary(Mute) +// ~ 1 2 3 4 5 6 7 8 9 0 - (=) BackSpc Del +// Tab Q W E R T Y U I O P [ ] PgUp +// Caps A S D F G H J K L ; " # Enter PgDn +// Sh_L / Z X C V B N M , . ? Sh_R Up End +// Ct_L Win_L Alt_L SPACE Alt_R FN Ct_R Left Down Right + + + // + // This keyboard defaults to 6KRO instead of NKRO for compatibility reasons (some KVMs and BIOSes are incompatible with NKRO). + // Since this is, among other things, a "gaming" keyboard, a key combination to enable NKRO on the fly is provided for convenience. + // Press CAPS+N to toggle between 6KRO and NKRO. This setting is persisted to the EEPROM and thus persists between restarts. + [_BASE] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, + MO(_MOV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, TG(_RGB),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_MOV] = LAYOUT( + RESET, KC_MYCM, KC_WHOM, KC_CALC, KC_MSEL, KC_MPRV, KC_MPLY, KC_MSTP, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [_RGB] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_SPI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, RGB_SPD, + _______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI + ), + +}; +// clang-format on + +#if defined(ENCODER_ENABLE) +bool encoder_update_user(uint8_t index, bool clockwise) { + switch (get_highest_layer(layer_state)) { + case _MOV: + if (clockwise) { + tap_code16(C(KC_TAB)); + } else { + tap_code16(S(C(KC_TAB))); + } + break; +#if defined(RGB_MATRIX_ENABLE) + case _RGB: + if (clockwise) { + rgb_matrix_increase_val_noeeprom(); + } else { + rgb_matrix_decrease_val_noeeprom(); + } + break; +#endif // RGB_MATRIX_ENABLE + default: + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + } + return true; +} +#endif // ENCODER_ENABLE + +#if defined(RGB_MATRIX_ENABLE) +/* +* Set up default RGB color. +*/ +void rgb_matrix_set_default_color(void) { + rgb_matrix_sethsv_noeeprom_user(HSV_CHARTREUSE); +} + +/* +* Set up RGB defaults. +*/ +void rgb_matrix_configure_default_settings(void) { + rgb_matrix_set_default_color(); +} + +void keyboard_post_init_user(void) { + rgb_matrix_enable_noeeprom(); + rgb_matrix_configure_default_settings(); +} + +/* +* Use RGB underglow to indicate specific layers. +*/ +layer_state_t layer_state_set_user(layer_state_t state) { + switch (get_highest_layer(state)) { + case _MOV: + rgb_matrix_sethsv_noeeprom_user(HSV_SPRINGGREEN); + break; + case _RGB: + rgb_matrix_sethsv_noeeprom_user(HSV_GREEN); + break; + default: // for any other layer + rgb_matrix_set_default_color(); + break; + } + return state; +} + +void matrix_scan_user(void) { + matrix_scan_user_rgb(); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_user_rgb(keycode, record)) { + return false; + } + + switch (keycode) { + case RESET: // when activating RESET mode for flashing + if (record->event.pressed) { + rgb_matrix_set_color_all(63, 0, 0); + rgb_matrix_driver.flush(); + } + return true; + } + return true; // Process all other keycodes normally +} +#endif // RGB_MATRIX_ENABLE diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc b/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc new file mode 100644 index 0000000000..38a74a568b --- /dev/null +++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc @@ -0,0 +1,104 @@ += ViToni's keymap for GMMK Pro ISO + +== Layout +Based on the stock layout but making use of CAPS as FN similar to laptop keyboards. +This frees up the left row for other uses (although not remapped yet). +Since both Delete and Insert are used for coding they are part of the CAPS layer as well. + +The differences are as follows: + +=== Layer 0 (`_BASE`) +Mostly stock + CAPS goes to layer `_MOV`. +FN toggles the layer `_RGB`. + +=== Layer 1 (`_MOV`), accessed by pressing `CAPS` on layer `_BASE` +[%header] +|=== +| Key / Action | Mapped to +| ESC | _RESET_ +| F1 | KC_MYCM +| F2 | KC_WHOM +| F3 | KC_CALC +| F4 | KC_MSEL +| F5 | KC_MPRV +| F6 | KC_MPLY +| F7 | KC_MSTP +| F8 | KC_MNXT +| F9 | KC_MUTE +| F10 | KC_VOLD +| F11 | KC_VOLU +| N | NK_TOGG +| Delete | Insert +| Left | Home +| Right | End +| Up | PgUp +| Down | PgDn +|=== + +=== Layer 2 (`_RGB`), accessed by pressing `FN` on layer `_BASE` +Revamped the stock FN layer to focus on RGB only. + +[%header] +|=== +| Key / Action | Mapped to +| Knob clockwise | Value/Brightness up +| Knob anti-clockwise | Value/Brightness down +| Backspace | _RESET_ +| Enter | RGB_TOG +| Del | RGB_MOD +| PgUp | RGB_RMOD +| PgDn | RGB_SPI +| End | RGB_SPD +| Left | RGB_HUD +| Right | RGB_HUI +| Up | RGB_SAI +| Down | RGB_SAD +|=== + +No other changes have been made. + +== RGB light + +The code customizing RGB light usage is decribed here: + +* link:../../../../../../users/vitoni/readme.adoc[/users/vitoni/readme.adoc] + +When using `RGB_DISABLE_TIMEOUT` addtional options are available: + +* `RGB_FADE_IN` makes the RGB lights fade in instead of setting the value/brightness to 100% (implicitly due to HSV including the brightness) when resuming after RGB lights have been turned off. +Fade in occurs when the keyboard is initialized and when the RGB brightness has been changed (e.g. suspending, fade out, etc.). +* `RGB_DISABLE_WITH_FADE_OUT` activates fade out before the keyboard is disabled by `RGB_DISABLE_TIMEOUT`. + +Parameters used to define the behavior are: +[%header] +|=== +|Key | Default | Description + +| RGB_MATRIX_MAXIMUM_BRIGHTNESS +| 200 (<= UNIT8_MAX) +| Maximum assumed value for brightness. +Used to calculate lead time for fade out before suspend timeout. + +|=== + +`RGB_IDLE_TIMEOUT` enables fading out after being idle for the defined time and allows +* `RGB_IDLE_BREATHE` also activates a brethe effect while idling. + +[%header] +|=== +|Key | Default | Description + +|RGB_IDLE_TIMEOUT +|4500 +|Time in milliseconds without activity before considered to be idle. + +|RGB_IDLE_MINIMUM_BRIGHTNESS +|`RGB_MATRIX_MAXIMUM_BRIGHTNESS` / 5 +|Brightness value RGB is dimmed to when starting to idle. + +When breathing used as the lower bound of the brightness value. + +|RGB_IDLE_MAXIMUM_BRIGHTNESS +|`RGB_MATRIX_MAXIMUM_BRIGHTNESS` * 2/5 +|Upper bound of brightness value of the RGB light while breathing. + +|=== diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c index a21cd08e14..a70e8c5aca 100644 --- a/keyboards/handwired/dactyl/matrix.c +++ b/keyboards/handwired/dactyl/matrix.c @@ -281,14 +281,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/frenchdev/matrix.c b/keyboards/handwired/frenchdev/matrix.c index 5ab254a6f9..a043f78538 100644 --- a/keyboards/handwired/frenchdev/matrix.c +++ b/keyboards/handwired/frenchdev/matrix.c @@ -174,12 +174,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/not_so_minidox/config.h b/keyboards/handwired/not_so_minidox/config.h index de9286eda5..177552e2a6 100644 --- a/keyboards/handwired/not_so_minidox/config.h +++ b/keyboards/handwired/not_so_minidox/config.h @@ -40,6 +40,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USE_SERIAL +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + //#define EE_HANDS #define MASTER_LEFT diff --git a/keyboards/handwired/not_so_minidox/i2c.c b/keyboards/handwired/not_so_minidox/i2c.c deleted file mode 100644 index 084c890c40..0000000000 --- a/keyboards/handwired/not_so_minidox/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/handwired/not_so_minidox/i2c.h b/keyboards/handwired/not_so_minidox/i2c.h deleted file mode 100644 index 8910e70f10..0000000000 --- a/keyboards/handwired/not_so_minidox/i2c.h +++ /dev/null @@ -1,46 +0,0 @@ -#pragma once - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c b/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c index 296a7a281d..435eed2f1f 100644 --- a/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c +++ b/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c @@ -8,17 +8,10 @@ #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 -#define _ADJUST 16 +#define _ADJUST 3 -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, -}; - -#define KC_LOWR LOWER -#define KC_RASE RAISE +#define KC_LOWR MO(_LOWER) +#define KC_RASE MO(_RAISE) #define KC_RST RESET #define KC_CAD LCTL(LALT(KC_DEL)) @@ -72,45 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_ADJUST); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - } - return true; +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); } diff --git a/keyboards/handwired/not_so_minidox/matrix.c b/keyboards/handwired/not_so_minidox/matrix.c deleted file mode 100644 index b7cec9370c..0000000000 --- a/keyboards/handwired/not_so_minidox/matrix.c +++ /dev/null @@ -1,308 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "config.h" -#include "quantum.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - int ret = _matrix_scan(); - - - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - writePinLow(D5); - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - writePinHigh(D5); - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); - -#ifdef USE_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/handwired/not_so_minidox/rules.mk b/keyboards/handwired/not_so_minidox/rules.mk index 3eab0fba7e..8f9772df22 100644 --- a/keyboards/handwired/not_so_minidox/rules.mk +++ b/keyboards/handwired/not_so_minidox/rules.mk @@ -7,19 +7,14 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control +EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -USE_I2C = no -CUSTOM_MATRIX = yes -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c +SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/not_so_minidox/serial.c b/keyboards/handwired/not_so_minidox/serial.c deleted file mode 100644 index 74bcbb6bf6..0000000000 --- a/keyboards/handwired/not_so_minidox/serial.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifndef USE_I2C - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/handwired/not_so_minidox/serial.h b/keyboards/handwired/not_so_minidox/serial.h deleted file mode 100644 index 28fcc56ce7..0000000000 --- a/keyboards/handwired/not_so_minidox/serial.h +++ /dev/null @@ -1,23 +0,0 @@ -#pragma once - -#include "config.h" -#include <stdbool.h> - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); diff --git a/keyboards/handwired/not_so_minidox/split_util.c b/keyboards/handwired/not_so_minidox/split_util.c deleted file mode 100644 index 39639c3b4b..0000000000 --- a/keyboards/handwired/not_so_minidox/split_util.c +++ /dev/null @@ -1,84 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init (); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -void keyboard_slave_loop(void) { - matrix_init(); - - while (1) { - matrix_slave_scan(); - } -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); - - if (!has_usb()) { - keyboard_slave_loop(); - } -} diff --git a/keyboards/handwired/not_so_minidox/split_util.h b/keyboards/handwired/not_so_minidox/split_util.h deleted file mode 100644 index 807412cd38..0000000000 --- a/keyboards/handwired/not_so_minidox/split_util.h +++ /dev/null @@ -1,17 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); diff --git a/keyboards/handwired/onekey/teensy_32/rules.mk b/keyboards/handwired/onekey/teensy_32/rules.mk index c1b90d0d2b..937c9d5103 100644 --- a/keyboards/handwired/onekey/teensy_32/rules.mk +++ b/keyboards/handwired/onekey/teensy_32/rules.mk @@ -1,5 +1,8 @@ # MCU name MCU = MK20DX256 +# Bootloader selection +BOOTLOADER = halfkay + # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/onekey/teensy_lc/rules.mk b/keyboards/handwired/onekey/teensy_lc/rules.mk index b3daabe317..0e3c7edf7a 100644 --- a/keyboards/handwired/onekey/teensy_lc/rules.mk +++ b/keyboards/handwired/onekey/teensy_lc/rules.mk @@ -2,5 +2,8 @@ MCU = MKL26Z64 USE_CHIBIOS_CONTRIB = yes +# Bootloader selection +BOOTLOADER = halfkay + # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/promethium/matrix.c b/keyboards/handwired/promethium/matrix.c index e3a41af288..90dbce14a9 100644 --- a/keyboards/handwired/promethium/matrix.c +++ b/keyboards/handwired/promethium/matrix.c @@ -148,14 +148,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) diff --git a/keyboards/handwired/pterodactyl/matrix.c b/keyboards/handwired/pterodactyl/matrix.c index 21e6a128df..d0f74802a0 100644 --- a/keyboards/handwired/pterodactyl/matrix.c +++ b/keyboards/handwired/pterodactyl/matrix.c @@ -282,14 +282,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/config.h index d7618912f7..b9d8e86c09 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/config.h @@ -52,5 +52,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define OLED_DISPLAY_128X64 -#define POINTING_DEVICE_TASK_THROTTLE #define POINTING_DEVICE_RIGHT diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index 958f694172..65f8a5260d 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -301,7 +301,7 @@ void oled_driver_render_logo_left(void) { # endif oled_set_cursor(6, 3); # if defined(KEYBOARD_handwired_tractyl_manuform_5x6_right) - render_pointing_dpi_status(0); + render_pointing_dpi_status(kb_config_data.device_cpi, 0); # endif oled_set_cursor(0, 4); } diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk index 37bbbb4dae..a689be3dd5 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk @@ -18,6 +18,4 @@ MOUSE_SHARED_EP = yes SPLIT_KEYBOARD = yes -QUANTUM_LIB_SRC += tm_sync.c - DEFAULT_FOLDER = handwired/tractyl_manuform/5x6_right/teensy2pp diff --git a/keyboards/handwired/tractyl_manuform/config.h b/keyboards/handwired/tractyl_manuform/config.h index cc8a7546f4..15c8102b8f 100644 --- a/keyboards/handwired/tractyl_manuform/config.h +++ b/keyboards/handwired/tractyl_manuform/config.h @@ -39,4 +39,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -#define SPLIT_TRANSACTION_IDS_KB RPC_ID_KB_CONFIG_SYNC, RPC_ID_POINTER_STATE_SYNC +#define SPLIT_POINTING_ENABLE +#define POINTING_DEVICE_TASK_THROTTLE_MS 1 + +#define SPLIT_TRANSACTION_IDS_KB RPC_ID_KB_CONFIG_SYNC diff --git a/keyboards/handwired/tractyl_manuform/tm_sync.c b/keyboards/handwired/tractyl_manuform/tm_sync.c deleted file mode 100644 index 549a17a22f..0000000000 --- a/keyboards/handwired/tractyl_manuform/tm_sync.c +++ /dev/null @@ -1,180 +0,0 @@ -/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> - * Copyright 2021 Dasky (@daskygit) - - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include QMK_KEYBOARD_H -#include "pointing_device.h" -#include "transactions.h" -#include <string.h> -#ifdef MOUSEKEY_ENABLE -# include "mousekey.h" -#endif - -// typedef struct { -// uint16_t device_cpi; -// } kb_config_data_t; - -kb_config_data_t kb_config; -static report_mouse_t shared_mouse_report; -extern const pointing_device_driver_t pointing_device_driver; - -void kb_pointer_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { - shared_mouse_report = pointing_device_driver.get_report(shared_mouse_report); - memcpy(target2initiator_buffer, &shared_mouse_report, sizeof(report_mouse_t)); - shared_mouse_report.x = 0; - shared_mouse_report.y = 0; - shared_mouse_report.h = 0; - shared_mouse_report.v = 0; -} - -void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { - if (initiator2target_buffer_size == sizeof(kb_config)) { - memcpy(&kb_config, initiator2target_buffer, sizeof(kb_config)); - } - - static uint16_t cpi = 0; - // Check if the state values are different - if (cpi != kb_config.device_cpi) { - cpi = kb_config.device_cpi; - if (!is_keyboard_left()) { - pointing_device_set_cpi(cpi); - } - } -} - -void keyboard_pre_init_sync(void) { - memset(&kb_config, 0, sizeof(kb_config)); - memset(&shared_mouse_report, 0, sizeof(shared_mouse_report)); -} - -void keyboard_post_init_sync(void) { - // Register keyboard state sync split transaction - transaction_register_rpc(RPC_ID_KB_CONFIG_SYNC, kb_config_sync_handler); - transaction_register_rpc(RPC_ID_POINTER_STATE_SYNC, kb_pointer_sync_handler); -} - -void housekeeping_task_sync(void) { - if (is_keyboard_master()) { - // Keep track of the last state, so that we can tell if we need to propagate to slave - static kb_config_data_t last_kb_config; - static uint32_t last_sync = 0; - bool needs_sync = false; - - // Check if the state values are different - if (memcmp(&kb_config, &last_kb_config, sizeof(kb_config))) { - needs_sync = true; - memcpy(&last_kb_config, &kb_config, sizeof(kb_config)); - } - // Send to slave every 500ms regardless of state change - if (timer_elapsed32(last_sync) > 500) { - needs_sync = true; - } - - // Perform the sync if requested - if (needs_sync) { - if (transaction_rpc_send(RPC_ID_KB_CONFIG_SYNC, sizeof(kb_config), &kb_config)) { - last_sync = timer_read32(); - } - } - } -} - -void trackball_set_cpi(uint16_t cpi) { - kb_config.device_cpi = cpi; - if (!is_keyboard_left()) { - pointing_device_set_cpi(cpi); - } -} - -void pointing_device_task(void) { - if (!is_keyboard_master()) { - return; - } - -#if defined(POINTING_DEVICE_TASK_THROTTLE) - static uint32_t last_exec = 0; - if (timer_elapsed32(last_exec) < 1) { - return; - } - last_exec = timer_read32(); -#endif - - report_mouse_t local_report = pointing_device_get_report(); - - // Gather report info -#ifdef POINTING_DEVICE_MOTION_PIN - if (!readPin(POINTING_DEVICE_MOTION_PIN)) -#endif -#if defined(POINTING_DEVICE_COMBINED) - local_report = pointing_device_driver.get_report(local_report); - transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &shared_mouse_report); - local_report.x = local_report.x | shared_mouse_report.x; - local_report.y = local_report.y | shared_mouse_report.y; - local_report.h = local_report.h | shared_mouse_report.h; - local_report.v = local_report.v | shared_mouse_report.v; -#elif defined(POINTING_DEVICE_LEFT) - if (is_keyboard_left()) { - local_report = pointing_device_driver.get_report(local_report); - } else { - transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &local_report); - } -#elif defined(POINTING_DEVICE_RIGHT) - if (!is_keyboard_left()) { - local_report = pointing_device_driver.get_report(local_report); - } else { - transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &local_report); - } -#else -# error "You need to define the side(s) the pointing device is on. POINTING_DEVICE_COMBINED / POINTING_DEVICE_LEFT / POINTING_DEVICE_RIGHT" -#endif - - // Support rotation of the sensor data -#if defined(POINTING_DEVICE_ROTATION_90) || defined(POINTING_DEVICE_ROTATION_180) || defined(POINTING_DEVICE_ROTATION_270) - int8_t x = local_report.x, y = local_report.y; -# if defined(POINTING_DEVICE_ROTATION_90) - local_report.x = y; - local_report.y = -x; -# elif defined(POINTING_DEVICE_ROTATION_180) - local_report.x = -x; - local_report.y = -y; -# elif defined(POINTING_DEVICE_ROTATION_270) - local_report.x = -y; - local_report.y = x; -# else -# error "How the heck did you get here?!" -# endif -#endif - // Support Inverting the X and Y Axises -#if defined(POINTING_DEVICE_INVERT_X) - local_report.x = -local_report.x; -#endif -#if defined(POINTING_DEVICE_INVERT_Y) - local_report.y = -local_report.y; -#endif - - // allow kb to intercept and modify report - local_report = pointing_device_task_kb(local_report); - // combine with mouse report to ensure that the combined is sent correctly -#ifdef MOUSEKEY_ENABLE - report_mouse_t mousekey_report = mousekey_get_report(); - local_report.buttons = local_report.buttons | mousekey_report.buttons; -#endif -#if defined(POINTING_DEVICE_COMBINED) - local_report.buttons = local_report.buttons | shared_mouse_report.buttons; -#endif - pointing_device_set_report(local_report); - pointing_device_send(); -} diff --git a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c b/keyboards/handwired/tractyl_manuform/tractyl_manuform.c index 6095bfb7e2..5bdc57ca09 100644 --- a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c +++ b/keyboards/handwired/tractyl_manuform/tractyl_manuform.c @@ -17,7 +17,6 @@ #include "tractyl_manuform.h" #include "transactions.h" #include <string.h> -#include "drivers/sensors/pmw3360.h" #ifndef TRACKBALL_DPI_OPTIONS # define TRACKBALL_DPI_OPTIONS \ @@ -31,11 +30,10 @@ #endif keyboard_config_t keyboard_config; +kb_config_data_t kb_config_data; uint16_t dpi_array[] = TRACKBALL_DPI_OPTIONS; #define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t)) - - bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (!process_record_user(keycode, record)) { return false; @@ -49,7 +47,8 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE; } eeconfig_update_kb(keyboard_config.raw); - trackball_set_cpi(dpi_array[keyboard_config.dpi_config]); + kb_config_data.device_cpi = dpi_array[keyboard_config.dpi_config]; + pointing_device_set_cpi(kb_config_data.device_cpi); } #endif @@ -69,7 +68,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { return true; } -__attribute__((weak)) void keyboard_pre_init_sync(void) {} __attribute__((weak)) void keyboard_pre_init_sub(void) {} void keyboard_pre_init_kb(void) { // debug_enable = true; @@ -83,20 +81,22 @@ void keyboard_pre_init_kb(void) { writePin(DEBUG_LED_PIN, !debug_enable); #endif + memset(&kb_config_data, 0, sizeof(kb_config_data)); + keyboard_pre_init_sub(); - keyboard_pre_init_sync(); keyboard_pre_init_user(); } -__attribute__((weak)) void keyboard_post_init_sync(void) {} -void keyboard_post_init_kb(void) { - keyboard_post_init_sync(); +void keyboard_post_init_kb(void) { + transaction_register_rpc(RPC_ID_KB_CONFIG_SYNC, kb_config_sync_handler); + keyboard_post_init_user(); } #ifdef POINTING_DEVICE_ENABLE void pointing_device_init_kb(void) { - trackball_set_cpi(dpi_array[keyboard_config.dpi_config]); + kb_config_data.device_cpi = dpi_array[keyboard_config.dpi_config]; + pointing_device_set_cpi(kb_config_data.device_cpi); pointing_device_init_user(); } @@ -111,7 +111,8 @@ report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { void eeconfig_init_kb(void) { keyboard_config.dpi_config = TRACKBALL_DPI_DEFAULT; #ifdef POINTING_DEVICE_ENABLE - trackball_set_cpi(dpi_array[keyboard_config.dpi_config]); + kb_config_data.device_cpi = dpi_array[keyboard_config.dpi_config]; + pointing_device_set_cpi(kb_config_data.device_cpi); #endif eeconfig_update_kb(keyboard_config.raw); eeconfig_init_user(); @@ -135,12 +136,39 @@ void matrix_scan_kb(void) { matrix_scan_user(); } -__attribute__((weak)) void housekeeping_task_sync(void) {} -void housekeeping_task_kb(void) { - housekeeping_task_sync(); +void housekeeping_task_kb(void) { + if (is_keyboard_master()) { + // Keep track of the last state, so that we can tell if we need to propagate to slave + static kb_config_data_t last_kb_config; + static uint32_t last_sync = 0; + bool needs_sync = false; + + // Check if the state values are different + if (memcmp(&kb_config_data, &last_kb_config, sizeof(kb_config_data))) { + needs_sync = true; + memcpy(&last_kb_config, &kb_config_data, sizeof(kb_config_data)); + } + // Send to slave every 500ms regardless of state change + if (timer_elapsed32(last_sync) > 500) { + needs_sync = true; + } + + // Perform the sync if requested + if (needs_sync) { + if (transaction_rpc_send(RPC_ID_KB_CONFIG_SYNC, sizeof(kb_config_data), &kb_config_data)) { + last_sync = timer_read32(); + } + } + } // no need for user function, is called already } +void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { + if (initiator2target_buffer_size == sizeof(kb_config_data)) { + memcpy(&kb_config_data, initiator2target_buffer, sizeof(kb_config_data)); + } +} + #ifdef POINTING_DEVICE_ENABLE void matrix_power_up(void) { pointing_device_task(); } #endif diff --git a/keyboards/handwired/tractyl_manuform/tractyl_manuform.h b/keyboards/handwired/tractyl_manuform/tractyl_manuform.h index 6aa40fc18b..3f8aca4551 100644 --- a/keyboards/handwired/tractyl_manuform/tractyl_manuform.h +++ b/keyboards/handwired/tractyl_manuform/tractyl_manuform.h @@ -32,21 +32,26 @@ typedef union { }; } keyboard_config_t; +typedef union { + uint32_t raw; + struct { + uint16_t device_cpi; + }; +} kb_config_data_t; + extern keyboard_config_t keyboard_config; +extern kb_config_data_t kb_config_data; enum ploopy_keycodes { DPI_CONFIG = SAFE_RANGE, KEYMAP_SAFE_RANGE, }; -typedef struct { - uint16_t device_cpi; -} kb_config_data_t; - -void trackball_set_cpi(uint16_t cpi); void matrix_init_sub_kb(void); void matrix_scan_sub_kb(void); void keyboard_pre_init_sync(void); void keyboard_post_init_sync(void); void housekeeping_task_sync(void); + +void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer); diff --git a/keyboards/handwired/wakizashi40/config.h b/keyboards/handwired/wakizashi40/config.h new file mode 100644 index 0000000000..78f85f2197 --- /dev/null +++ b/keyboards/handwired/wakizashi40/config.h @@ -0,0 +1,20 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" +#define DYNAMIC_KEYMAP_LAYER_COUNT 12 diff --git a/keyboards/handwired/wakizashi40/info.json b/keyboards/handwired/wakizashi40/info.json new file mode 100644 index 0000000000..b64ab55116 --- /dev/null +++ b/keyboards/handwired/wakizashi40/info.json @@ -0,0 +1,88 @@ +{ + "manufacturer": "fumbucker", + "keyboard_name": "Wakizashi 40", + "maintainer": "fumbucker", + "debounce": 5, + "processor": "at90usb1286", + "diode_direction": "COL2ROW", + "features": { + "audio": false, + "backlight": false, + "bluetooth": false, + "bootmagic": true, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": false, + "unicode": false + }, + "matrix_pins": { + "cols": ["C5", "C4", "D2", "D3", "D4", "D5", "C6", "D7", "B0", "B1", "B2", "B3", "B4"], + "rows": ["C0", "C1", "C2", "C3"] + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x7740", + "vid": "0x6662" + }, + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "TAB", "matrix": [0, 0], "w": 1.5, "x": 0, "y": 0 }, + { "label": "Q", "matrix": [0, 2], "w": 1, "x": 1.5, "y": 0 }, + { "label": "W", "matrix": [0, 3], "w": 1, "x": 2.5, "y": 0 }, + { "label": "E", "matrix": [0, 4], "w": 1, "x": 3.5, "y": 0 }, + { "label": "R", "matrix": [0, 5], "w": 1, "x": 4.5, "y": 0 }, + { "label": "T", "matrix": [0, 6], "w": 1, "x": 5.5, "y": 0 }, + { "label": "Y", "matrix": [0, 7], "w": 1, "x": 6.5, "y": 0 }, + { "label": "U", "matrix": [0, 8], "w": 1, "x": 7.5, "y": 0 }, + { "label": "I", "matrix": [0, 9], "w": 1, "x": 8.5, "y": 0 }, + { "label": "O", "matrix": [0, 10], "w": 1, "x": 9.5, "y": 0 }, + { "label": "P", "matrix": [0, 11], "w": 1, "x": 10.5, "y": 0 }, + { "label": "BACKSPACE", "matrix": [0, 12], "w": 1.5, "x": 11.5, "y": 0 }, + + { "label": "CAPSLOCK", "matrix": [1, 0], "w": 1.25, "x": 0, "y": 1 }, + { "label": "A", "matrix": [1, 1], "w": 1, "x": 1.25, "y": 1 }, + { "label": "S", "matrix": [1, 2], "w": 1, "x": 2.25, "y": 1 }, + { "label": "D", "matrix": [1, 3], "w": 1, "x": 3.25, "y": 1 }, + { "label": "F", "matrix": [1, 4], "w": 1, "x": 4.25, "y": 1 }, + { "label": "G", "matrix": [1, 5], "w": 1, "x": 5.75, "y": 1 }, + { "label": "H", "matrix": [1, 7], "w": 1, "x": 6.75, "y": 1 }, + { "label": "J", "matrix": [1, 8], "w": 1, "x": 7.75, "y": 1 }, + { "label": "K", "matrix": [1, 9], "w": 1, "x": 8.75, "y": 1 }, + { "label": "L", "matrix": [1, 10], "w": 1, "x": 9.75, "y": 1 }, + { "label": "SEMICOLON", "matrix": [1, 11], "w": 1, "x": 10.75, "y": 1 }, + { "label": "ENTER", "matrix": [1, 12], "w": 1.25, "x": 11.75, "y": 1 }, + + { "label": "LSHIFT", "matrix": [2, 0], "w": 1, "x": 0, "y": 2 }, + { "label": "Z", "matrix": [2, 1], "w": 1, "x": 1, "y": 2 }, + { "label": "X", "matrix": [2, 2], "w": 1, "x": 2, "y": 2 }, + { "label": "C", "matrix": [2, 3], "w": 1, "x": 3, "y": 2 }, + { "label": "V", "matrix": [2, 4], "w": 1, "x": 4, "y": 2 }, + { "label": "B", "matrix": [2, 5], "w": 1, "x": 5, "y": 2 }, + { "label": "ESCAPE", "matrix": [2, 6], "w": 1, "x": 6, "y": 2 }, + { "label": "N", "matrix": [2, 7], "w": 1, "x": 7, "y": 2 }, + { "label": "M", "matrix": [2, 8], "w": 1, "x": 8, "y": 2 }, + { "label": "COMMA", "matrix": [2, 9], "w": 1, "x": 9, "y": 2 }, + { "label": "PERIOD", "matrix": [2, 10], "w": 1, "x": 10, "y": 2 }, + { "label": "SLASH", "matrix": [2, 11], "w": 1, "x": 11, "y": 2 }, + { "label": "RSHIFT", "matrix": [2, 12], "w": 1, "x": 12, "y": 2 }, + + { "label": "LCTRL", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "LWIN", "matrix": [3, 1], "w": 1.25, "x": 1.25, "y": 3 }, + { "label": "LALT", "matrix": [3, 3], "w": 1.25, "x": 2.5, "y": 3 }, + { "label": "SPACE1", "matrix": [3, 5], "w": 2.75, "x": 3.75, "y": 3 }, + { "label": "SPACE2", "matrix": [3, 7], "w": 2.75, "x": 6.5, "y": 3 }, + { "label": "RALT", "matrix": [3, 9], "w": 1.25, "x": 9.25, "y": 3 }, + { "label": "MENU", "matrix": [3, 11], "w": 1.25, "x": 10.5, "y": 3 }, + { "label": "RCTRL", "matrix": [3, 12], "w": 1.25, "x": 11.75, "y": 3 } + ] + } + } +} diff --git a/keyboards/handwired/wakizashi40/keymaps/default/keymap.c b/keyboards/handwired/wakizashi40/keymaps/default/keymap.c new file mode 100644 index 0000000000..910e5bde12 --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL), + + [1] = LAYOUT_all( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + MO(3), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; diff --git a/keyboards/handwired/wakizashi40/keymaps/via/keymap.c b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c new file mode 100644 index 0000000000..d456b8b40a --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c @@ -0,0 +1,92 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL), + + [1] = LAYOUT_all( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + MO(11), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [4] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [5] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [6] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [7] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [8] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [9] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [10] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [11] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; diff --git a/keyboards/handwired/wakizashi40/keymaps/via/rules.mk b/keyboards/handwired/wakizashi40/keymaps/via/rules.mk new file mode 100644 index 0000000000..7a49719505 --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/via/rules.mk @@ -0,0 +1,4 @@ +# rules.mk overrides to enable VIA + +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md new file mode 100644 index 0000000000..d94a75651c --- /dev/null +++ b/keyboards/handwired/wakizashi40/readme.md @@ -0,0 +1,19 @@ +# Wakizashi 40 + + + +Reverse stagger 40% keyboard based on the Katana 60. + +* Keyboard Maintainer: [fumbucker](https://github.com/xia0) +* Hardware Supported: Teensy2++ +* Hardware Availability: [thingiverse](https://www.thingiverse.com/thing:3467930) + +Make example for this keyboard (after setting up your build environment): + + make handwired/wakizashi40:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + +## Bootloader + +* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Capslock + R). diff --git a/keyboards/handwired/wakizashi40/rules.mk b/keyboards/handwired/wakizashi40/rules.mk new file mode 100644 index 0000000000..6e7633bfe0 --- /dev/null +++ b/keyboards/handwired/wakizashi40/rules.mk @@ -0,0 +1 @@ +# This file intentionally left blank diff --git a/keyboards/helix/pico/matrix.c b/keyboards/helix/pico/matrix.c index b18213d846..039cca6dcf 100644 --- a/keyboards/helix/pico/matrix.c +++ b/keyboards/helix/pico/matrix.c @@ -273,12 +273,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/helix/rev1/matrix.c b/keyboards/helix/rev1/matrix.c index aa2cc76905..f59391b596 100644 --- a/keyboards/helix/rev1/matrix.c +++ b/keyboards/helix/rev1/matrix.c @@ -239,12 +239,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/helix/rev2/matrix.c b/keyboards/helix/rev2/matrix.c index 8eed7e58b7..699c15358b 100644 --- a/keyboards/helix/rev2/matrix.c +++ b/keyboards/helix/rev2/matrix.c @@ -287,12 +287,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/hhkb/ansi/matrix.c b/keyboards/hhkb/ansi/matrix.c index 529ba8b8fc..5dde74cce9 100644 --- a/keyboards/hhkb/ansi/matrix.c +++ b/keyboards/hhkb/ansi/matrix.c @@ -163,15 +163,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix[i] != matrix_prev[i]) - return true; - } - return false; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/hhkb/jp/matrix.c b/keyboards/hhkb/jp/matrix.c index c0dca6a990..81db77fca7 100644 --- a/keyboards/hhkb/jp/matrix.c +++ b/keyboards/hhkb/jp/matrix.c @@ -164,15 +164,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix[i] != matrix_prev[i]) - return true; - } - return false; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/hid_liber/matrix.c b/keyboards/hid_liber/matrix.c index ff59a17153..da73c616d7 100755 --- a/keyboards/hid_liber/matrix.c +++ b/keyboards/hid_liber/matrix.c @@ -218,12 +218,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - // NOTE: no longer used - return true; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/honeycomb/config.h b/keyboards/honeycomb/config.h index 725f9490cb..c959543618 100755 --- a/keyboards/honeycomb/config.h +++ b/keyboards/honeycomb/config.h @@ -45,12 +45,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/honeycomb/honeycomb.c b/keyboards/honeycomb/honeycomb.c index 1254196d39..603400c7a3 100755 --- a/keyboards/honeycomb/honeycomb.c +++ b/keyboards/honeycomb/honeycomb.c @@ -7,7 +7,7 @@ void pointing_device_task(void){ uint32_t timeout = 0; //the m character requests the RF slave to send the mouse report - SERIAL_UART_DATA = 'm'; + uart_write('m'); //trust the external inputs completely, erase old data uint8_t uart_data[5] = {0}; @@ -17,7 +17,7 @@ void pointing_device_task(void){ //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while(!uart_available()){ timeout++; if (timeout > 10000){ xprintf("\r\nTIMED OUT"); @@ -25,7 +25,7 @@ void pointing_device_task(void){ } } xprintf("\r\nGOT DATA for %d",i); - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, bytes 1-4 are movement and scroll diff --git a/keyboards/honeycomb/matrix.c b/keyboards/honeycomb/matrix.c index 7fef6f0fd8..fe1e4ce8ff 100755 --- a/keyboards/honeycomb/matrix.c +++ b/keyboards/honeycomb/matrix.c @@ -30,7 +30,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "honeycomb.h" #include "pointing_device.h" #include "report.h" -#include "protocol/serial.h" +#include "uart.h" #if (MATRIX_COLS <= 8) # define print_matrix_header() print("\nr/c 01234567\n") @@ -95,7 +95,7 @@ uint8_t matrix_cols(void) { void matrix_init(void) { matrix_init_quantum(); - serial_init(); + uart_init(1000000); } uint8_t matrix_scan(void) @@ -103,7 +103,7 @@ uint8_t matrix_scan(void) uint32_t timeout = 0; // The 's' character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); // Trust the external keystates entirely, erase the last data uint8_t uart_data[4] = {0}; @@ -113,14 +113,14 @@ uint8_t matrix_scan(void) // Wait for the serial data, timeout if it's been too long // This only happened in testing with a loose wire, but does no // harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while(!uart_available()){ timeout++; if (timeout > 10000){ xprintf("\r\nTime out in keyboard."); break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } // Check for the end packet, it's our checksum. diff --git a/keyboards/honeycomb/rules.mk b/keyboards/honeycomb/rules.mk index 2b5eb0360c..a6029e3dbf 100755 --- a/keyboards/honeycomb/rules.mk +++ b/keyboards/honeycomb/rules.mk @@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality # # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/kinesis/alvicstep/matrix.c b/keyboards/kinesis/alvicstep/matrix.c index 71619f8167..9c05374510 100644 --- a/keyboards/kinesis/alvicstep/matrix.c +++ b/keyboards/kinesis/alvicstep/matrix.c @@ -136,12 +136,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/kprepublic/bm65hsrgb_iso/config.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h index 30b27dc26e..30b27dc26e 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/config.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h diff --git a/keyboards/kprepublic/bm65hsrgb_iso/info.json b/keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json index 9212c43339..9212c43339 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/info.json +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/config.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/config.h index 1dc1414fa5..1dc1414fa5 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/config.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/config.h diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/keymap.c index 46de987a68..46de987a68 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/keymap.c diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/keymap.h index 1459e2c5bb..1459e2c5bb 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/keymap.h diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/readme.md index 095550b01a..095550b01a 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/readme.md +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/readme.md diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/rules.mk index c8354ea256..c8354ea256 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/rules.mk +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/rules.mk diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/default/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/default/keymap.c index bed12e0f72..bed12e0f72 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/default/keymap.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/keymap.c index ae36e6b1f5..ae36e6b1f5 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/keymap.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/readme.md index 87c7542756..87c7542756 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/readme.md +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/readme.md diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/rules.mk index 036bd6d1c3..036bd6d1c3 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/rules.mk +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm65hsrgb_iso/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/rev1/readme.md index 752362e29a..752362e29a 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/readme.md +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/readme.md diff --git a/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rev1.c index 134c271824..f351fa68a8 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rev1.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "bm65hsrgb_iso.h" +#include "rev1.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { diff --git a/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rev1.h index 7f39c6f61b..7f39c6f61b 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rev1.h diff --git a/keyboards/kprepublic/bm65hsrgb_iso/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rules.mk index c3a6bf1d48..c3a6bf1d48 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/rules.mk +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rules.mk diff --git a/keyboards/kprepublic/bm68hsrgb/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/config.h index a779c97b7b..a779c97b7b 100644 --- a/keyboards/kprepublic/bm68hsrgb/config.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/config.h diff --git a/keyboards/kprepublic/bm68hsrgb/info.json b/keyboards/kprepublic/bm68hsrgb/rev1/info.json index 0a72da6e98..0a72da6e98 100644 --- a/keyboards/kprepublic/bm68hsrgb/info.json +++ b/keyboards/kprepublic/bm68hsrgb/rev1/info.json diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/default/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c index b4bc5cb59d..b4bc5cb59d 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/default/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/default/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/readme.md index 0408ee9e98..0408ee9e98 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/default/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/readme.md diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h index 0748f83cdc..0748f83cdc 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/config.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c index 934463b11f..934463b11f 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.h b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.h index e8d0170d4d..e8d0170d4d 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.h diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/readme.md index 47899c27e1..47899c27e1 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/readme.md diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/via/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c index 46381c561c..46381c561c 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/via/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/via/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/readme.md index c013ae25e2..c013ae25e2 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/via/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/readme.md diff --git a/keyboards/wings42/rev1_extkeys/keymaps/via/rules.mk b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/wings42/rev1_extkeys/keymaps/via/rules.mk +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm68hsrgb/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/readme.md index 54d71cab2c..54d71cab2c 100644 --- a/keyboards/kprepublic/bm68hsrgb/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/rev1/readme.md diff --git a/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.c b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.c index 734d2ee677..4634a662b6 100644 --- a/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.c @@ -14,7 +14,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "bm68hsrgb.h" +#include "rev1.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { diff --git a/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.h b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.h index 3e18b914cc..3e18b914cc 100644 --- a/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.h diff --git a/keyboards/kprepublic/bm68hsrgb/rules.mk b/keyboards/kprepublic/bm68hsrgb/rev1/rules.mk index 92c37f393b..92c37f393b 100644 --- a/keyboards/kprepublic/bm68hsrgb/rules.mk +++ b/keyboards/kprepublic/bm68hsrgb/rev1/rules.mk diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk index 83d4fc590b..f0ff36fa35 100644 --- a/keyboards/massdrop/alt/rules.mk +++ b/keyboards/massdrop/alt/rules.mk @@ -5,6 +5,9 @@ SRC += config_led.c ARM_ATSAM = SAMD51J18A MCU = cortex-m4 +# Bootloader selection +BOOTLOADER = md-boot + # Build Options # change yes to no to disable # diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk index 667642f83d..a302c82d86 100644 --- a/keyboards/massdrop/ctrl/rules.mk +++ b/keyboards/massdrop/ctrl/rules.mk @@ -5,6 +5,9 @@ SRC += config_led.c ARM_ATSAM = SAMD51J18A MCU = cortex-m4 +# Bootloader selection +BOOTLOADER = md-boot + # Build Options # change yes to no to disable # diff --git a/keyboards/matrix/m20add/m20add.c b/keyboards/matrix/m20add/m20add.c index 21f4f9b1ba..4d328d6c54 100644 --- a/keyboards/matrix/m20add/m20add.c +++ b/keyboards/matrix/m20add/m20add.c @@ -53,25 +53,6 @@ bool led_update_kb(led_t led_state) { return res; } -// override the default implementation to avoid re-initialization -void i2c_init(void) -{ - static bool initialized = false; - if (initialized) { - return; - } else { - initialized = true; - } - - // Try releasing special pins for a short time - palSetLineMode(I2C1_SCL_PIN, PAL_MODE_INPUT); - palSetLineMode(I2C1_SDA_PIN, PAL_MODE_INPUT); - - chThdSleepMilliseconds(10); - palSetLineMode(I2C1_SCL_PIN, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); - palSetLineMode(I2C1_SDA_PIN, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); -} - #define REBOOT_MAGIC 0x41544B42 void shutdown_user(void) { diff --git a/keyboards/mechlovin/olly/jf/rules.mk b/keyboards/mechlovin/olly/jf/rules.mk index c0c9b2d7ea..2fafe64f12 100644 --- a/keyboards/mechlovin/olly/jf/rules.mk +++ b/keyboards/mechlovin/olly/jf/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a F_CPU = 16000000 # Bootloader selection -BOOTLOADER = USBasp +BOOTLOADER = usbasploader # Build Options # change yes to no to disable @@ -21,4 +21,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite -SRC += matrix.c
\ No newline at end of file +SRC += matrix.c diff --git a/keyboards/meira/matrix.c b/keyboards/meira/matrix.c index ae1ae5ce9d..8e8e9485b4 100644 --- a/keyboards/meira/matrix.c +++ b/keyboards/meira/matrix.c @@ -161,12 +161,6 @@ uint8_t matrix_scan(void) return ret; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/mitosis/config.h b/keyboards/mitosis/config.h index 94e84e680e..2c72eed5f2 100644 --- a/keyboards/mitosis/config.h +++ b/keyboards/mitosis/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/mitosis/matrix.c b/keyboards/mitosis/matrix.c index 71c372a3ce..a92c3e8431 100644 --- a/keyboards/mitosis/matrix.c +++ b/keyboards/mitosis/matrix.c @@ -15,80 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -98,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk index 6c7aa30d88..0a8a31e7dd 100644 --- a/keyboards/mitosis/rules.mk +++ b/keyboards/mitosis/rules.mk @@ -8,14 +8,17 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = yes # Unicode +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes +CUSTOM_MATRIX = lite -# # project specific files -SRC += matrix.c serial_uart.c +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/nek_type_a/matrix.c b/keyboards/nek_type_a/matrix.c index a59598a503..b396be9911 100644 --- a/keyboards/nek_type_a/matrix.c +++ b/keyboards/nek_type_a/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/planck/keymaps/thermal_printer/config.h b/keyboards/planck/keymaps/thermal_printer/config.h index 4ae9ced258..dd9d6a9d25 100644 --- a/keyboards/planck/keymaps/thermal_printer/config.h +++ b/keyboards/planck/keymaps/thermal_printer/config.h @@ -1,9 +1,4 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define SERIAL_UART_BAUD 19200 +#pragma once /* * MIDI options @@ -21,8 +16,3 @@ - etc. */ //#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 2 - - #endif
\ No newline at end of file diff --git a/keyboards/redox_w/config.h b/keyboards/redox_w/config.h index b480b072f9..c4aeb32d58 100644 --- a/keyboards/redox_w/config.h +++ b/keyboards/redox_w/config.h @@ -55,12 +55,3 @@ //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/redox_w/matrix.c b/keyboards/redox_w/matrix.c index 703987a939..fd25231d9e 100644 --- a/keyboards/redox_w/matrix.c +++ b/keyboards/redox_w/matrix.c @@ -13,89 +13,21 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -105,58 +37,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 7; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 7; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/redox_w/rules.mk b/keyboards/redox_w/rules.mk index a8bd3a027a..8cb1736147 100644 --- a/keyboards/redox_w/rules.mk +++ b/keyboards/redox_w/rules.mk @@ -8,13 +8,16 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite -# # project specific files -SRC += matrix.c serial_uart.c +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/redscarf_iiplus/verb/matrix.c b/keyboards/redscarf_iiplus/verb/matrix.c index 42cfb7c037..88ecb586b3 100755 --- a/keyboards/redscarf_iiplus/verb/matrix.c +++ b/keyboards/redscarf_iiplus/verb/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/redscarf_iiplus/verc/matrix.c b/keyboards/redscarf_iiplus/verc/matrix.c index 42cfb7c037..88ecb586b3 100755 --- a/keyboards/redscarf_iiplus/verc/matrix.c +++ b/keyboards/redscarf_iiplus/verc/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/redscarf_iiplus/verd/matrix.c b/keyboards/redscarf_iiplus/verd/matrix.c index 78d1191b68..d9dbb3c0a3 100644 --- a/keyboards/redscarf_iiplus/verd/matrix.c +++ b/keyboards/redscarf_iiplus/verd/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/rocketboard_16/rules.mk b/keyboards/rocketboard_16/rules.mk index d27da2c226..c07ebff427 100644 --- a/keyboards/rocketboard_16/rules.mk +++ b/keyboards/rocketboard_16/rules.mk @@ -8,7 +8,7 @@ MCU = STM32F103 MCU_LDSCRIPT = STM32F103xB_stm32duino_bootloader OPT_DEFS += -DBOOTLOADER_STM32DUINO BOARD = STM32_F103_STM32DUINO -STM32_BOOTLOADER_ADDRESS = 0x80000000 +BOOTLOADER_TYPE = stm32duino DFU_ARGS = -d 1EAF:0003 -a 2 -R DFU_SUFFIX_ARGS = -v 1EAF -p 0003 diff --git a/keyboards/sirius/uni660/rev1/config.h b/keyboards/sirius/uni660/rev1/config.h index 91d7c5d7a3..f9815844cb 100644 --- a/keyboards/sirius/uni660/rev1/config.h +++ b/keyboards/sirius/uni660/rev1/config.h @@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); - #define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev1/matrix.c b/keyboards/sirius/uni660/rev1/matrix.c index 2db6767a46..919db5c80d 100644 --- a/keyboards/sirius/uni660/rev1/matrix.c +++ b/keyboards/sirius/uni660/rev1/matrix.c @@ -15,83 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "debounce.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} +#include "quantum.h" +#include "matrix.h" +#include "uart.h" -void matrix_init(void) { - debounce_init(MATRIX_ROWS); - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ - bool matrix_has_changed = false; - +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[17] = {0}; @@ -101,60 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 8; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 8; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - debounce(matrix, matrix, MATRIX_ROWS, matrix_has_changed); - - matrix_scan_quantum(); - - return matrix_has_changed; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/sirius/uni660/rev1/rules.mk b/keyboards/sirius/uni660/rev1/rules.mk index 836bf6b442..71cc3efd92 100644 --- a/keyboards/sirius/uni660/rev1/rules.mk +++ b/keyboards/sirius/uni660/rev1/rules.mk @@ -17,7 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode -CUSTOM_MATRIX = yes +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/sirius/uni660/rev2/ansi/config.h b/keyboards/sirius/uni660/rev2/ansi/config.h index 13e33ebf11..8777dc4011 100644 --- a/keyboards/sirius/uni660/rev2/ansi/config.h +++ b/keyboards/sirius/uni660/rev2/ansi/config.h @@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); - #define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev2/iso/config.h b/keyboards/sirius/uni660/rev2/iso/config.h index 3283f0cd67..763230dca8 100644 --- a/keyboards/sirius/uni660/rev2/iso/config.h +++ b/keyboards/sirius/uni660/rev2/iso/config.h @@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); - #define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev2/matrix.c b/keyboards/sirius/uni660/rev2/matrix.c index 2db6767a46..919db5c80d 100644 --- a/keyboards/sirius/uni660/rev2/matrix.c +++ b/keyboards/sirius/uni660/rev2/matrix.c @@ -15,83 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "debounce.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} +#include "quantum.h" +#include "matrix.h" +#include "uart.h" -void matrix_init(void) { - debounce_init(MATRIX_ROWS); - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ - bool matrix_has_changed = false; - +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[17] = {0}; @@ -101,60 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 8; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 8; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - debounce(matrix, matrix, MATRIX_ROWS, matrix_has_changed); - - matrix_scan_quantum(); - - return matrix_has_changed; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/sirius/uni660/rev2/rules.mk b/keyboards/sirius/uni660/rev2/rules.mk index 0abebb07c6..850c2a2e35 100644 --- a/keyboards/sirius/uni660/rev2/rules.mk +++ b/keyboards/sirius/uni660/rev2/rules.mk @@ -17,9 +17,10 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode -CUSTOM_MATRIX = yes +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c DEFAULT_FOLDER = sirius/uni660/rev2/ansi diff --git a/keyboards/sirius/unigo66/custom_matrix.cpp b/keyboards/sirius/unigo66/custom_matrix.cpp index fba107c7cb..dfcf82c779 100644 --- a/keyboards/sirius/unigo66/custom_matrix.cpp +++ b/keyboards/sirius/unigo66/custom_matrix.cpp @@ -172,10 +172,6 @@ extern "C" return 1; } - bool matrix_is_modified(void) { - return matrix_is_mod; - } - bool matrix_is_on(uint8_t row, uint8_t col) { uint8_t code = CODE(row, col); diff --git a/keyboards/sixkeyboard/matrix.c b/keyboards/sixkeyboard/matrix.c index 64b46e9b0c..a6b28f3a12 100644 --- a/keyboards/sixkeyboard/matrix.c +++ b/keyboards/sixkeyboard/matrix.c @@ -114,11 +114,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/sx60/matrix.c b/keyboards/sx60/matrix.c index b7dc25425d..231e1c8836 100644 --- a/keyboards/sx60/matrix.c +++ b/keyboards/sx60/matrix.c @@ -172,14 +172,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/telophase/config.h b/keyboards/telophase/config.h index 51718da9d4..837bb8ab9b 100644 --- a/keyboards/telophase/config.h +++ b/keyboards/telophase/config.h @@ -72,12 +72,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION - -// UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c index a153dd4bf1..44b7e4c9e9 100644 --- a/keyboards/telophase/matrix.c +++ b/keyboards/telophase/matrix.c @@ -18,10 +18,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "quantum.h" #include "matrix.h" -#include "protocol/serial.h" +#include "uart.h" void matrix_init_custom(void) { - serial_init(); + uart_init(1000000); } bool matrix_scan_custom(matrix_row_t current_matrix[]) { @@ -29,7 +29,7 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) { bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[13] = {0}; @@ -39,13 +39,13 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) { //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while (!SERIAL_UART_RXD_PRESENT) { + while (!uart_available()) { timeout++; if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 diff --git a/keyboards/telophase/rules.mk b/keyboards/telophase/rules.mk index c3a8aaf79f..41a6ee25f5 100644 --- a/keyboards/telophase/rules.mk +++ b/keyboards/telophase/rules.mk @@ -19,7 +19,8 @@ AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c # Disable unsupported hardware RGBLIGHT_SUPPORTED = no diff --git a/keyboards/tgr/jane/v2ce/rules.mk b/keyboards/tgr/jane/v2ce/rules.mk index 0a865321a6..8fcc8d911f 100644 --- a/keyboards/tgr/jane/v2ce/rules.mk +++ b/keyboards/tgr/jane/v2ce/rules.mk @@ -2,7 +2,7 @@ MCU = atmega32a # Bootloader selection -BOOTLOADER = bootloadHID +BOOTLOADER = bootloadhid # Build Options # change yes to no to disable diff --git a/keyboards/thedogkeyboard/matrix.c b/keyboards/thedogkeyboard/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/thedogkeyboard/matrix.c +++ b/keyboards/thedogkeyboard/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/yanghu/unicorne/config.h b/keyboards/yanghu/unicorne/config.h index 652afeb3b4..27d21c7906 100644 --- a/keyboards/yanghu/unicorne/config.h +++ b/keyboards/yanghu/unicorne/config.h @@ -42,6 +42,12 @@ #define ENCODERS_PAD_B \ { B12, B0 } +/* I2C - required for custom i2c_init */ +#define I2C1_SCL_PIN B6 +#define I2C1_SDA_PIN B7 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 + /* Audio */ #define AUDIO_PIN A8 #define AUDIO_PWM_PAL_MODE 1 diff --git a/keyboards/yosino58/rev1/matrix.c b/keyboards/yosino58/rev1/matrix.c index 3db40b3829..e2be7113bf 100644 --- a/keyboards/yosino58/rev1/matrix.c +++ b/keyboards/yosino58/rev1/matrix.c @@ -289,12 +289,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/lib/python/qmk/cli/generate/develop_pr_list.py b/lib/python/qmk/cli/generate/develop_pr_list.py index 07e46752a6..fab0262773 100755 --- a/lib/python/qmk/cli/generate/develop_pr_list.py +++ b/lib/python/qmk/cli/generate/develop_pr_list.py @@ -97,7 +97,7 @@ def generate_develop_pr_list(cli): match = git_expr.search(line) if match: pr_info = _get_pr_info(cache, gh, match.group("pr")) - commit_info = {'hash': match.group("hash"), 'title': match.group("title"), 'pr_num': int(match.group("pr")), 'pr_labels': [label.name for label in pr_info.labels.items]} + commit_info = {'hash': match.group("hash"), 'title': pr_info['title'], 'pr_num': int(match.group("pr")), 'pr_labels': [label.name for label in pr_info.labels.items]} _categorise_commit(commit_info) def _dump_commit_list(name, collection): diff --git a/platforms/arm_atsam/bootloader.c b/platforms/arm_atsam/bootloaders/md_boot.c index 9015b00aab..e7508ffe51 100644 --- a/platforms/arm_atsam/bootloader.c +++ b/platforms/arm_atsam/bootloaders/md_boot.c @@ -15,13 +15,18 @@ */ #include "bootloader.h" + #include "samd51j18a.h" -#include "md_bootloader.h" -// Set watchdog timer to reset. Directs the bootloader to stay in programming mode. -void bootloader_jump(void) { #ifdef KEYBOARD_massdrop_ctrl - // CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method. +// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support +extern uint32_t _eram; + +# define BOOTLOADER_MAGIC 0x3B9ACA00 +# define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4) + +// CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method. +void bootloader_jump(void) { uint8_t ver_ram_method[] = "v2.18Jun 22 2018 17:28:08"; // The version to match (NULL terminated by compiler) uint8_t *ver_check = ver_ram_method; // Pointer to version match string for traversal uint8_t *ver_rom = (uint8_t *)0x21A0; // Pointer to address in ROM where this specific bootloader version would exist @@ -34,24 +39,34 @@ void bootloader_jump(void) { if (!*ver_check) { // If check version pointer is NULL, all characters have matched *MAGIC_ADDR = BOOTLOADER_MAGIC; // Set magic number into RAM NVIC_SystemReset(); // Perform system reset - while (1) { - } // Won't get here + + while (1) + ; // Won't get here } -#endif +} +#else + +// Set watchdog timer to reset. Directs the bootloader to stay in programming mode. +void bootloader_jump(void) { WDT->CTRLA.bit.ENABLE = 0; - while (WDT->SYNCBUSY.bit.ENABLE) { - } - while (WDT->CTRLA.bit.ENABLE) { - } + + while (WDT->SYNCBUSY.bit.ENABLE) + ; + while (WDT->CTRLA.bit.ENABLE) + ; + WDT->CONFIG.bit.WINDOW = 0; WDT->CONFIG.bit.PER = 0; WDT->EWCTRL.bit.EWOFFSET = 0; WDT->CTRLA.bit.ENABLE = 1; - while (WDT->SYNCBUSY.bit.ENABLE) { - } - while (!WDT->CTRLA.bit.ENABLE) { - } - while (1) { - } // Wait on timeout + + while (WDT->SYNCBUSY.bit.ENABLE) + ; + while (!WDT->CTRLA.bit.ENABLE) + ; + + while (1) + ; // Wait on timeout } +#endif diff --git a/platforms/arm_atsam/gpio.h b/platforms/arm_atsam/gpio.h index 915ed0ef4f..a42aaff54d 100644 --- a/platforms/arm_atsam/gpio.h +++ b/platforms/arm_atsam/gpio.h @@ -22,9 +22,9 @@ typedef uint8_t pin_t; -#define SAMD_PORT(pin) ((pin & 0x20) >> 5) -#define SAMD_PIN(pin) (pin & 0x1f) -#define SAMD_PIN_MASK(pin) (1 << (pin & 0x1f)) +#define SAMD_PORT(pin) (((pin)&0x20) >> 5) +#define SAMD_PIN(pin) ((pin)&0x1f) +#define SAMD_PIN_MASK(pin) (1 << ((pin)&0x1f)) #define setPinInput(pin) \ do { \ @@ -48,12 +48,16 @@ typedef uint8_t pin_t; PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.PULLEN = 1; \ } while (0) -#define setPinOutput(pin) \ +#define setPinOutputPushPull(pin) \ do { \ PORT->Group[SAMD_PORT(pin)].DIRSET.reg = SAMD_PIN_MASK(pin); \ PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \ } while (0) +#define setPinOutputOpenDrain(pin) _Static_assert(0, "arm_atsam platform does not implement an open-drain output") + +#define setPinOutput(pin) setPinOutputPushPull(pin) + #define writePinHigh(pin) \ do { \ PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \ diff --git a/platforms/avr/bootloader.c b/platforms/avr/bootloader.c deleted file mode 100644 index c0272903b8..0000000000 --- a/platforms/avr/bootloader.c +++ /dev/null @@ -1,293 +0,0 @@ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/eeprom.h> -#include <avr/interrupt.h> -#include <avr/wdt.h> -#include <util/delay.h> -#include "bootloader.h" -#include <avr/boot.h> - -#ifdef PROTOCOL_LUFA -# include <LUFA/Drivers/USB/USB.h> -#endif - -/** \brief Bootloader Size in *bytes* - * - * AVR Boot section size are defined by setting BOOTSZ fuse in fact. Consult with your MCU datasheet. - * Note that 'Word'(2 bytes) size and address are used in datasheet while TMK uses 'Byte'. - * - * Size of Bootloaders in bytes: - * Atmel DFU loader(ATmega32U4) 4096 - * Atmel DFU loader(AT90USB128) 8192 - * LUFA bootloader(ATmega32U4) 4096 - * Arduino Caterina(ATmega32U4) 4096 - * USBaspLoader(ATmega***) 2048 - * Teensy halfKay(ATmega32U4) 512 - * Teensy++ halfKay(AT90USB128) 1024 - * - * AVR Boot section is located at the end of Flash memory like the followings. - * - * byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB128) - * 0x0000 +---------------+ 0x00000 +---------------+ - * | | | | - * | | | | - * | Application | | Application | - * | | | | - * = = = = - * | | 32KB-4KB | | 128KB-8KB - * 0x7000 +---------------+ 0x1E000 +---------------+ - * | Bootloader | 4KB | Bootloader | 8KB - * 0x7FFF +---------------+ 0x1FFFF +---------------+ - * - * - * byte Teensy(ATMega32u4) byte Teensy++(AT90SUB128) - * 0x0000 +---------------+ 0x00000 +---------------+ - * | | | | - * | | | | - * | Application | | Application | - * | | | | - * = = = = - * | | 32KB-512B | | 128KB-1KB - * 0x7E00 +---------------+ 0x1FC00 +---------------+ - * | Bootloader | 512B | Bootloader | 1KB - * 0x7FFF +---------------+ 0x1FFFF +---------------+ - */ -#define FLASH_SIZE (FLASHEND + 1L) - -#if !defined(BOOTLOADER_SIZE) -uint16_t bootloader_start; -#endif - -// compatibility between ATMega8 and ATMega88 -#if !defined(MCUCSR) -# if defined(MCUSR) -# define MCUCSR MCUSR -# endif -#endif - -/** \brief Entering the Bootloader via Software - * - * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html - */ -#define BOOTLOADER_RESET_KEY 0xB007B007 -uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;"))); - -/** \brief initialize MCU status by watchdog reset - * - * FIXME: needs doc - */ -__attribute__((weak)) void bootloader_jump(void) { -#if !defined(BOOTLOADER_SIZE) - uint8_t high_fuse = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); - - if (high_fuse & ~(FUSE_BOOTSZ0 & FUSE_BOOTSZ1)) { - bootloader_start = (FLASH_SIZE - 512) >> 1; - } else if (high_fuse & ~(FUSE_BOOTSZ1)) { - bootloader_start = (FLASH_SIZE - 1024) >> 1; - } else if (high_fuse & ~(FUSE_BOOTSZ0)) { - bootloader_start = (FLASH_SIZE - 2048) >> 1; - } else { - bootloader_start = (FLASH_SIZE - 4096) >> 1; - } -#endif - - // Something like this might work, but it compiled larger than the block above - // bootloader_start = FLASH_SIZE - (256 << (~high_fuse & 0b110 >> 1)); - -#if defined(BOOTLOADER_HALFKAY) - // http://www.pjrc.com/teensy/jump_to_bootloader.html - cli(); - // disable watchdog, if enabled (it's not) - // disable all peripherals - // a shutdown call might make sense here - UDCON = 1; - USBCON = (1 << FRZCLK); // disable USB - UCSR1B = 0; - _delay_ms(5); -# if defined(__AVR_AT90USB162__) // Teensy 1.0 - EIMSK = 0; - PCICR = 0; - SPCR = 0; - ACSR = 0; - EECR = 0; - TIMSK0 = 0; - TIMSK1 = 0; - UCSR1B = 0; - DDRB = 0; - DDRC = 0; - DDRD = 0; - PORTB = 0; - PORTC = 0; - PORTD = 0; - asm volatile("jmp 0x3E00"); -# elif defined(__AVR_ATmega32U4__) // Teensy 2.0 - EIMSK = 0; - PCICR = 0; - SPCR = 0; - ACSR = 0; - EECR = 0; - ADCSRA = 0; - TIMSK0 = 0; - TIMSK1 = 0; - TIMSK3 = 0; - TIMSK4 = 0; - UCSR1B = 0; - TWCR = 0; - DDRB = 0; - DDRC = 0; - DDRD = 0; - DDRE = 0; - DDRF = 0; - TWCR = 0; - PORTB = 0; - PORTC = 0; - PORTD = 0; - PORTE = 0; - PORTF = 0; - asm volatile("jmp 0x7E00"); -# elif defined(__AVR_AT90USB646__) // Teensy++ 1.0 - EIMSK = 0; - PCICR = 0; - SPCR = 0; - ACSR = 0; - EECR = 0; - ADCSRA = 0; - TIMSK0 = 0; - TIMSK1 = 0; - TIMSK2 = 0; - TIMSK3 = 0; - UCSR1B = 0; - TWCR = 0; - DDRA = 0; - DDRB = 0; - DDRC = 0; - DDRD = 0; - DDRE = 0; - DDRF = 0; - PORTA = 0; - PORTB = 0; - PORTC = 0; - PORTD = 0; - PORTE = 0; - PORTF = 0; - asm volatile("jmp 0xFC00"); -# elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0 - EIMSK = 0; - PCICR = 0; - SPCR = 0; - ACSR = 0; - EECR = 0; - ADCSRA = 0; - TIMSK0 = 0; - TIMSK1 = 0; - TIMSK2 = 0; - TIMSK3 = 0; - UCSR1B = 0; - TWCR = 0; - DDRA = 0; - DDRB = 0; - DDRC = 0; - DDRD = 0; - DDRE = 0; - DDRF = 0; - PORTA = 0; - PORTB = 0; - PORTC = 0; - PORTD = 0; - PORTE = 0; - PORTF = 0; - asm volatile("jmp 0x1FC00"); -# endif - -#elif defined(BOOTLOADER_CATERINA) - // this block may be optional - // TODO: figure it out - - uint16_t *const bootKeyPtr = (uint16_t *)0x0800; - - // Value used by Caterina bootloader use to determine whether to run the - // sketch or the bootloader programmer. - uint16_t bootKey = 0x7777; - - *bootKeyPtr = bootKey; - - // setup watchdog timeout - wdt_enable(WDTO_60MS); - - while (1) { - } // wait for watchdog timer to trigger - -#elif defined(BOOTLOADER_USBASP) - // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c - wdt_enable(WDTO_15MS); - wdt_reset(); - asm volatile("cli \n\t" - "ldi r29 , %[ramendhi] \n\t" - "ldi r28 , %[ramendlo] \n\t" -# if (FLASHEND > 131071) - "ldi r18 , %[bootaddrhi] \n\t" - "st Y+, r18 \n\t" -# endif - "ldi r18 , %[bootaddrme] \n\t" - "st Y+, r18 \n\t" - "ldi r18 , %[bootaddrlo] \n\t" - "st Y+, r18 \n\t" - "out %[mcucsrio], __zero_reg__ \n\t" - "bootloader_startup_loop%=: \n\t" - "rjmp bootloader_startup_loop%= \n\t" - : - : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)), -# if (FLASHEND > 131071) - [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), -# else - [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff), -# endif - [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); - -#else // Assume remaining boards are DFU, even if the flag isn't set - -# if !(defined(__AVR_ATmega32A__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATtiny85__)) // no USB - maybe BOOTLOADER_BOOTLOADHID instead though? - UDCON = 1; - USBCON = (1 << FRZCLK); // disable USB - UCSR1B = 0; - _delay_ms(5); // 5 seems to work fine -# endif - -# ifdef BOOTLOADER_BOOTLOADHID - // force bootloadHID to stay in bootloader mode, so that it waits - // for a new firmware to be flashed - eeprom_write_byte((uint8_t *)1, 0x00); -# endif - - // watchdog reset - reset_key = BOOTLOADER_RESET_KEY; - wdt_enable(WDTO_250MS); - for (;;) - ; -#endif -} - -/* this runs before main() */ -void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3"))); -void bootloader_jump_after_watchdog_reset(void) { -#ifndef BOOTLOADER_HALFKAY - if ((MCUCSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { - reset_key = 0; - - // My custom USBasploader requires this to come up. - MCUCSR = 0; - - // Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog. - MCUCSR &= ~(1 << WDRF); - wdt_disable(); - -// This is compled into 'icall', address should be in word unit, not byte. -# ifdef BOOTLOADER_SIZE - ((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))(); -# else - asm("ijmp" ::"z"(bootloader_start)); -# endif - } -#endif -} diff --git a/platforms/avr/bootloaders/bootloadhid.c b/platforms/avr/bootloaders/bootloadhid.c new file mode 100644 index 0000000000..ae58760d7d --- /dev/null +++ b/platforms/avr/bootloaders/bootloadhid.c @@ -0,0 +1,33 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/eeprom.h> +#include <avr/wdt.h> + +__attribute__((weak)) void bootloader_jump(void) { + // force bootloadHID to stay in bootloader mode, so that it waits + // for a new firmware to be flashed + // NOTE: this byte is part of QMK's "magic number" - changing it causes the EEPROM to be re-initialized + // thus every time the device is flashed the EEPROM will be wiped + eeprom_write_byte((uint8_t *)1, 0x00); + + // watchdog reset + wdt_enable(WDTO_250MS); + for (;;) + ; +} diff --git a/platforms/avr/bootloaders/caterina.c b/platforms/avr/bootloaders/caterina.c new file mode 100644 index 0000000000..82a16a3765 --- /dev/null +++ b/platforms/avr/bootloaders/caterina.c @@ -0,0 +1,39 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/wdt.h> + +__attribute__((weak)) void bootloader_jump(void) { + // this block may be optional + // TODO: figure it out + + uint16_t *const bootKeyPtr = (uint16_t *)0x0800; + + // Value used by Caterina bootloader use to determine whether to run the + // sketch or the bootloader programmer. + uint16_t bootKey = 0x7777; + + *bootKeyPtr = bootKey; + + // setup watchdog timeout + wdt_enable(WDTO_60MS); + + // wait for watchdog timer to trigger + while (1) { + } +} diff --git a/platforms/avr/bootloaders/dfu.c b/platforms/avr/bootloaders/dfu.c new file mode 100644 index 0000000000..cb42821a93 --- /dev/null +++ b/platforms/avr/bootloaders/dfu.c @@ -0,0 +1,52 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/wdt.h> +#include <util/delay.h> + +#define FLASH_SIZE (FLASHEND + 1L) + +/** \brief Entering the Bootloader via Software + * + * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html + */ +#define BOOTLOADER_RESET_KEY 0xB007B007 +uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;"))); + +__attribute__((weak)) void bootloader_jump(void) { + UDCON = 1; + USBCON = (1 << FRZCLK); // disable USB + UCSR1B = 0; + _delay_ms(5); // 5 seems to work fine + + // watchdog reset + reset_key = BOOTLOADER_RESET_KEY; + wdt_enable(WDTO_250MS); + for (;;) + ; +} + +/* this runs before main() */ +void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3"))); +void bootloader_jump_after_watchdog_reset(void) { + if ((MCUSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { + reset_key = 0; + + ((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))(); + } +} diff --git a/platforms/avr/bootloaders/halfkay.c b/platforms/avr/bootloaders/halfkay.c new file mode 100644 index 0000000000..6ce2e19114 --- /dev/null +++ b/platforms/avr/bootloaders/halfkay.c @@ -0,0 +1,128 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/interrupt.h> +#include <util/delay.h> + +__attribute__((weak)) void bootloader_jump(void) { + // http://www.pjrc.com/teensy/jump_to_bootloader.html + + cli(); + // disable watchdog, if enabled (it's not) + // disable all peripherals + // a shutdown call might make sense here + UDCON = 1; + USBCON = (1 << FRZCLK); // disable USB + UCSR1B = 0; + _delay_ms(5); + +#if defined(__AVR_AT90USB162__) // Teensy 1.0 + EIMSK = 0; + PCICR = 0; + SPCR = 0; + ACSR = 0; + EECR = 0; + TIMSK0 = 0; + TIMSK1 = 0; + UCSR1B = 0; + DDRB = 0; + DDRC = 0; + DDRD = 0; + PORTB = 0; + PORTC = 0; + PORTD = 0; + asm volatile("jmp 0x3E00"); +#elif defined(__AVR_ATmega32U4__) // Teensy 2.0 + EIMSK = 0; + PCICR = 0; + SPCR = 0; + ACSR = 0; + EECR = 0; + ADCSRA = 0; + TIMSK0 = 0; + TIMSK1 = 0; + TIMSK3 = 0; + TIMSK4 = 0; + UCSR1B = 0; + TWCR = 0; + DDRB = 0; + DDRC = 0; + DDRD = 0; + DDRE = 0; + DDRF = 0; + TWCR = 0; + PORTB = 0; + PORTC = 0; + PORTD = 0; + PORTE = 0; + PORTF = 0; + asm volatile("jmp 0x7E00"); +#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0 + EIMSK = 0; + PCICR = 0; + SPCR = 0; + ACSR = 0; + EECR = 0; + ADCSRA = 0; + TIMSK0 = 0; + TIMSK1 = 0; + TIMSK2 = 0; + TIMSK3 = 0; + UCSR1B = 0; + TWCR = 0; + DDRA = 0; + DDRB = 0; + DDRC = 0; + DDRD = 0; + DDRE = 0; + DDRF = 0; + PORTA = 0; + PORTB = 0; + PORTC = 0; + PORTD = 0; + PORTE = 0; + PORTF = 0; + asm volatile("jmp 0xFC00"); +#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0 + EIMSK = 0; + PCICR = 0; + SPCR = 0; + ACSR = 0; + EECR = 0; + ADCSRA = 0; + TIMSK0 = 0; + TIMSK1 = 0; + TIMSK2 = 0; + TIMSK3 = 0; + UCSR1B = 0; + TWCR = 0; + DDRA = 0; + DDRB = 0; + DDRC = 0; + DDRD = 0; + DDRE = 0; + DDRF = 0; + PORTA = 0; + PORTB = 0; + PORTC = 0; + PORTD = 0; + PORTE = 0; + PORTF = 0; + asm volatile("jmp 0x1FC00"); +#endif +} diff --git a/platforms/avr/bootloaders/none.c b/platforms/avr/bootloaders/none.c new file mode 100644 index 0000000000..624fbe242a --- /dev/null +++ b/platforms/avr/bootloaders/none.c @@ -0,0 +1,19 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +__attribute__((weak)) void bootloader_jump(void) {} diff --git a/platforms/avr/bootloaders/usbasploader.c b/platforms/avr/bootloaders/usbasploader.c new file mode 100644 index 0000000000..008bd16069 --- /dev/null +++ b/platforms/avr/bootloaders/usbasploader.c @@ -0,0 +1,56 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/wdt.h> + +#define FLASH_SIZE (FLASHEND + 1L) + +#if !defined(MCUCSR) +# if defined(MCUSR) +# define MCUCSR MCUSR +# endif +#endif + +__attribute__((weak)) void bootloader_jump(void) { + // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c + + wdt_enable(WDTO_15MS); + wdt_reset(); + asm volatile("cli \n\t" + "ldi r29 , %[ramendhi] \n\t" + "ldi r28 , %[ramendlo] \n\t" +#if (FLASHEND > 131071) + "ldi r18 , %[bootaddrhi] \n\t" + "st Y+, r18 \n\t" +#endif + "ldi r18 , %[bootaddrme] \n\t" + "st Y+, r18 \n\t" + "ldi r18 , %[bootaddrlo] \n\t" + "st Y+, r18 \n\t" + "out %[mcucsrio], __zero_reg__ \n\t" + "bootloader_startup_loop%=: \n\t" + "rjmp bootloader_startup_loop%= \n\t" + : + : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)), +#if (FLASHEND > 131071) + [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), +#else + [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff), +#endif + [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); +} diff --git a/platforms/avr/drivers/i2c_master.c b/platforms/avr/drivers/i2c_master.c index 111b55d6b0..d4024378ca 100644 --- a/platforms/avr/drivers/i2c_master.c +++ b/platforms/avr/drivers/i2c_master.c @@ -32,6 +32,9 @@ # define I2C_START_RETRY_COUNT 20 #endif // I2C_START_RETRY_COUNT +#define I2C_ACTION_READ 0x01 +#define I2C_ACTION_WRITE 0x00 + #define TWBR_val (((F_CPU / F_SCL) - 16) / 2) #define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) @@ -154,7 +157,7 @@ int16_t i2c_read_nack(uint16_t timeout) { } i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); + i2c_status_t status = i2c_start(address | I2C_ACTION_WRITE, timeout); for (uint16_t i = 0; i < length && status >= 0; i++) { status = i2c_write(data[i], timeout); @@ -166,7 +169,7 @@ i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, } i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(address | I2C_READ, timeout); + i2c_status_t status = i2c_start(address | I2C_ACTION_READ, timeout); for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { status = i2c_read_ack(timeout); diff --git a/platforms/avr/drivers/serial.c b/platforms/avr/drivers/serial.c index 9a7345a53d..ab0b52afd1 100644 --- a/platforms/avr/drivers/serial.c +++ b/platforms/avr/drivers/serial.c @@ -16,6 +16,7 @@ #include <util/delay.h> #include <stddef.h> #include <stdbool.h> +#include "gpio.h" #include "serial.h" #ifdef SOFT_SERIAL_PIN @@ -119,12 +120,6 @@ # error invalid SOFT_SERIAL_PIN value # endif -# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF)) -# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF))) - # define ALWAYS_INLINE __attribute__((always_inline)) # define NO_INLINE __attribute__((noinline)) # define _delay_sub_us(x) __builtin_avr_delay_cycles(x) diff --git a/platforms/avr/gpio.h b/platforms/avr/gpio.h index e9be68491d..95f15c28dc 100644 --- a/platforms/avr/gpio.h +++ b/platforms/avr/gpio.h @@ -25,7 +25,9 @@ typedef uint8_t pin_t; #define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF)) #define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) #define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low") -#define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF)) +#define setPinOutputPushPull(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF)) +#define setPinOutputOpenDrain(pin) _Static_assert(0, "AVR platform does not implement an open-drain output") +#define setPinOutput(pin) setPinOutputPushPull(pin) #define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) #define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF)) @@ -34,16 +36,3 @@ typedef uint8_t pin_t; #define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF))) #define togglePin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF)) - -/* Operation of GPIO by port. */ - -typedef uint8_t port_data_t; - -#define readPort(port) PINx_ADDRESS(port) - -#define setPortBitInput(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) &= ~_BV((bit)&0xF)) -#define setPortBitInputHigh(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) |= _BV((bit)&0xF)) -#define setPortBitOutput(port, bit) (DDRx_ADDRESS(port) |= _BV((bit)&0xF)) - -#define writePortBitLow(port, bit) (PORTx_ADDRESS(port) &= ~_BV((bit)&0xF)) -#define writePortBitHigh(port, bit) (PORTx_ADDRESS(port) |= _BV((bit)&0xF)) diff --git a/platforms/chibios/bootloader.c b/platforms/chibios/bootloader.c deleted file mode 100644 index 58212948b0..0000000000 --- a/platforms/chibios/bootloader.c +++ /dev/null @@ -1,145 +0,0 @@ -#include "bootloader.h" - -#include <ch.h> -#include <hal.h> -#include "wait.h" - -/* This code should be checked whether it runs correctly on platforms */ -#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) -#define BOOTLOADER_MAGIC 0xDEADBEEF -#define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4) - -#ifndef STM32_BOOTLOADER_DUAL_BANK -# define STM32_BOOTLOADER_DUAL_BANK FALSE -#endif - -#ifdef BOOTLOADER_TINYUF2 - -# define DBL_TAP_MAGIC 0xf01669ef // From tinyuf2's board_api.h - -// defined by linker script -extern uint32_t _board_dfu_dbl_tap[]; -# define DBL_TAP_REG _board_dfu_dbl_tap[0] - -void bootloader_jump(void) { - DBL_TAP_REG = DBL_TAP_MAGIC; - NVIC_SystemReset(); -} - -void enter_bootloader_mode_if_requested(void) { /* not needed, no two-stage reset */ -} - -#elif STM32_BOOTLOADER_DUAL_BANK - -// Need pin definitions -# include "config_common.h" - -# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO -# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle" -# endif - -# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY -# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0 -# endif - -# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY -# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000 -# endif - -extern uint32_t __ram0_end__; - -__attribute__((weak)) void bootloader_jump(void) { - // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash - // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do - // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to - // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord - // #hardware channel pins for an example circuit. - palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL); -# if STM32_BOOTLOADER_DUAL_BANK_POLARITY - palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); -# else - palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); -# endif - - // Wait for a while for the capacitor to charge - wait_ms(100); - - // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high - NVIC_SystemReset(); -} - -void enter_bootloader_mode_if_requested(void) {} // not needed at all, but if anybody attempts to invoke it.... - -#elif defined(STM32_BOOTLOADER_ADDRESS) // STM32_BOOTLOADER_DUAL_BANK - -extern uint32_t __ram0_end__; - -__attribute__((weak)) void bootloader_jump(void) { - *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader - NVIC_SystemReset(); -} - -void enter_bootloader_mode_if_requested(void) { - unsigned long *check = MAGIC_ADDR; - if (*check == BOOTLOADER_MAGIC) { - *check = 0; - __set_CONTROL(0); - __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS); - __enable_irq(); - - typedef void (*BootJump_t)(void); - BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4); - boot_jump(); - while (1) - ; - } -} - -#elif defined(GD32VF103) - -# define DBGMCU_KEY_UNLOCK 0x4B5A6978 -# define DBGMCU_CMD_RESET 0x1 - -__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU; -__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U; - -__attribute__((weak)) void bootloader_jump(void) { - /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST - * register to generate a software reset request. - * BUT instead two undocumented registers in the debug peripheral - * that allow issueing a software reset. WHO would need the MSFRST - * register anyway? Source: - * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */ - *DBGMCU_KEY = DBGMCU_KEY_UNLOCK; - *DBGMCU_CMD = DBGMCU_CMD_RESET; -} - -void enter_bootloader_mode_if_requested(void) { /* Jumping to bootloader is not possible from user code. */ -} - -#elif defined(KL2x) || defined(K20x) || defined(MK66F18) || defined(MIMXRT1062) // STM32_BOOTLOADER_DUAL_BANK // STM32_BOOTLOADER_ADDRESS -/* Kinetis */ - -# if defined(BOOTLOADER_KIIBOHD) -/* Kiibohd Bootloader (MCHCK and Infinity KB) */ -# define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 -const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"; -__attribute__((weak)) void bootloader_jump(void) { - void *volatile vbat = (void *)VBAT; - __builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); - // request reset - SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; -} - -# else /* defined(BOOTLOADER_KIIBOHD) */ -/* Default for Kinetis - expecting an ARM Teensy */ -# include "wait.h" -__attribute__((weak)) void bootloader_jump(void) { - wait_ms(100); - __BKPT(0); -} -# endif /* defined(BOOTLOADER_KIIBOHD) */ - -#else /* neither STM32 nor KINETIS */ -__attribute__((weak)) void bootloader_jump(void) {} -#endif diff --git a/platforms/chibios/bootloaders/gd32v_dfu.c b/platforms/chibios/bootloaders/gd32v_dfu.c new file mode 100644 index 0000000000..7a979638e3 --- /dev/null +++ b/platforms/chibios/bootloaders/gd32v_dfu.c @@ -0,0 +1,39 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> + +#define DBGMCU_KEY_UNLOCK 0x4B5A6978 +#define DBGMCU_CMD_RESET 0x1 + +__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU; +__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U; + +__attribute__((weak)) void bootloader_jump(void) { + /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST + * register to generate a software reset request. + * BUT instead two undocumented registers in the debug peripheral + * that allow issueing a software reset. WHO would need the MSFRST + * register anyway? Source: + * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */ + *DBGMCU_KEY = DBGMCU_KEY_UNLOCK; + *DBGMCU_CMD = DBGMCU_CMD_RESET; +} + +/* Jumping to bootloader is not possible from user code. */ +void enter_bootloader_mode_if_requested(void) {} diff --git a/platforms/chibios/bootloaders/halfkay.c b/platforms/chibios/bootloaders/halfkay.c new file mode 100644 index 0000000000..168c2abc23 --- /dev/null +++ b/platforms/chibios/bootloaders/halfkay.c @@ -0,0 +1,25 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> +#include "wait.h" + +__attribute__((weak)) void bootloader_jump(void) { + wait_ms(100); + __BKPT(0); +} diff --git a/platforms/chibios/bootloaders/kiibohd.c b/platforms/chibios/bootloaders/kiibohd.c new file mode 100644 index 0000000000..911e807092 --- /dev/null +++ b/platforms/chibios/bootloaders/kiibohd.c @@ -0,0 +1,32 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> + +/* Kiibohd Bootloader (MCHCK and Infinity KB) */ +#define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 + +const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"; + +__attribute__((weak)) void bootloader_jump(void) { + void *volatile vbat = (void *)VBAT; + __builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); + + // request reset + SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; +} diff --git a/platforms/chibios/bootloaders/none.c b/platforms/chibios/bootloaders/none.c new file mode 100644 index 0000000000..624fbe242a --- /dev/null +++ b/platforms/chibios/bootloaders/none.c @@ -0,0 +1,19 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +__attribute__((weak)) void bootloader_jump(void) {} diff --git a/platforms/chibios/bootloaders/stm32_dfu.c b/platforms/chibios/bootloaders/stm32_dfu.c new file mode 100644 index 0000000000..0a113570f7 --- /dev/null +++ b/platforms/chibios/bootloaders/stm32_dfu.c @@ -0,0 +1,94 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> +#include <hal.h> +#include "wait.h" + +extern uint32_t __ram0_end__; + +#ifndef STM32_BOOTLOADER_DUAL_BANK +# define STM32_BOOTLOADER_DUAL_BANK FALSE +#endif + +#if STM32_BOOTLOADER_DUAL_BANK +# include "config_common.h" + +# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO +# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle" +# endif + +# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY +# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0 +# endif + +# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY +# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000 +# endif + +__attribute__((weak)) void bootloader_jump(void) { + // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash + // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do + // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to + // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord + // #hardware channel pins for an example circuit. + palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL); +# if STM32_BOOTLOADER_DUAL_BANK_POLARITY + palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); +# else + palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); +# endif + + // Wait for a while for the capacitor to charge + wait_ms(100); + + // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high + NVIC_SystemReset(); +} + +// not needed at all, but if anybody attempts to invoke it.... +void enter_bootloader_mode_if_requested(void) {} + +#else + +/* This code should be checked whether it runs correctly on platforms */ +# define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) +# define BOOTLOADER_MAGIC 0xDEADBEEF +# define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4) + +__attribute__((weak)) void bootloader_jump(void) { + *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader + NVIC_SystemReset(); +} + +void enter_bootloader_mode_if_requested(void) { + unsigned long *check = MAGIC_ADDR; + if (*check == BOOTLOADER_MAGIC) { + *check = 0; + __set_CONTROL(0); + __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS); + __enable_irq(); + + typedef void (*BootJump_t)(void); + BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4); + boot_jump(); + while (1) + ; + } +} +#endif diff --git a/platforms/chibios/bootloaders/stm32duino.c b/platforms/chibios/bootloaders/stm32duino.c new file mode 100644 index 0000000000..dd1d551fa9 --- /dev/null +++ b/platforms/chibios/bootloaders/stm32duino.c @@ -0,0 +1,21 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> + +__attribute__((weak)) void bootloader_jump(void) { NVIC_SystemReset(); } diff --git a/platforms/chibios/bootloaders/tinyuf2.c b/platforms/chibios/bootloaders/tinyuf2.c new file mode 100644 index 0000000000..9ffca5dec8 --- /dev/null +++ b/platforms/chibios/bootloaders/tinyuf2.c @@ -0,0 +1,34 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> + +// From tinyuf2's board_api.h +#define DBL_TAP_MAGIC 0xF01669EF + +// defined by linker script +extern uint32_t _board_dfu_dbl_tap[]; +#define DBL_TAP_REG _board_dfu_dbl_tap[0] + +__attribute__((weak)) void bootloader_jump(void) { + DBL_TAP_REG = DBL_TAP_MAGIC; + NVIC_SystemReset(); +} + +/* not needed, no two-stage reset */ +void enter_bootloader_mode_if_requested(void) {} diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c index 43591d56f8..4a5d4760d0 100644 --- a/platforms/chibios/drivers/i2c_master.c +++ b/platforms/chibios/drivers/i2c_master.c @@ -27,8 +27,67 @@ #include "quantum.h" #include "i2c_master.h" #include <string.h> +#include <ch.h> #include <hal.h> +#ifndef I2C1_SCL_PIN +# define I2C1_SCL_PIN B6 +#endif +#ifndef I2C1_SDA_PIN +# define I2C1_SDA_PIN B7 +#endif + +#ifdef USE_I2CV1 +# ifndef I2C1_OPMODE +# define I2C1_OPMODE OPMODE_I2C +# endif +# ifndef I2C1_CLOCK_SPEED +# define I2C1_CLOCK_SPEED 100000 /* 400000 */ +# endif +# ifndef I2C1_DUTY_CYCLE +# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */ +# endif +#else +// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock +// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html +# ifndef I2C1_TIMINGR_PRESC +# define I2C1_TIMINGR_PRESC 0U +# endif +# ifndef I2C1_TIMINGR_SCLDEL +# define I2C1_TIMINGR_SCLDEL 7U +# endif +# ifndef I2C1_TIMINGR_SDADEL +# define I2C1_TIMINGR_SDADEL 0U +# endif +# ifndef I2C1_TIMINGR_SCLH +# define I2C1_TIMINGR_SCLH 38U +# endif +# ifndef I2C1_TIMINGR_SCLL +# define I2C1_TIMINGR_SCLL 129U +# endif +#endif + +#ifndef I2C_DRIVER +# define I2C_DRIVER I2CD1 +#endif + +#ifdef USE_GPIOV1 +# ifndef I2C1_SCL_PAL_MODE +# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN +# endif +# ifndef I2C1_SDA_PAL_MODE +# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN +# endif +#else +// The default PAL alternate modes are used to signal that the pins are used for I2C +# ifndef I2C1_SCL_PAL_MODE +# define I2C1_SCL_PAL_MODE 4 +# endif +# ifndef I2C1_SDA_PAL_MODE +# define I2C1_SDA_PAL_MODE 4 +# endif +#endif + static uint8_t i2c_address; static const I2CConfig i2cconfig = { diff --git a/platforms/chibios/drivers/i2c_master.h b/platforms/chibios/drivers/i2c_master.h index 5f082e9d1e..deee7ecc08 100644 --- a/platforms/chibios/drivers/i2c_master.h +++ b/platforms/chibios/drivers/i2c_master.h @@ -24,66 +24,7 @@ */ #pragma once -#include <ch.h> -#include <hal.h> - -#ifndef I2C1_SCL_PIN -# define I2C1_SCL_PIN B6 -#endif -#ifndef I2C1_SDA_PIN -# define I2C1_SDA_PIN B7 -#endif - -#ifdef USE_I2CV1 -# ifndef I2C1_OPMODE -# define I2C1_OPMODE OPMODE_I2C -# endif -# ifndef I2C1_CLOCK_SPEED -# define I2C1_CLOCK_SPEED 100000 /* 400000 */ -# endif -# ifndef I2C1_DUTY_CYCLE -# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */ -# endif -#else -// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock -// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html -# ifndef I2C1_TIMINGR_PRESC -# define I2C1_TIMINGR_PRESC 0U -# endif -# ifndef I2C1_TIMINGR_SCLDEL -# define I2C1_TIMINGR_SCLDEL 7U -# endif -# ifndef I2C1_TIMINGR_SDADEL -# define I2C1_TIMINGR_SDADEL 0U -# endif -# ifndef I2C1_TIMINGR_SCLH -# define I2C1_TIMINGR_SCLH 38U -# endif -# ifndef I2C1_TIMINGR_SCLL -# define I2C1_TIMINGR_SCLL 129U -# endif -#endif - -#ifndef I2C_DRIVER -# define I2C_DRIVER I2CD1 -#endif - -#ifdef USE_GPIOV1 -# ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN -# endif -# ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN -# endif -#else -// The default PAL alternate modes are used to signal that the pins are used for I2C -# ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE 4 -# endif -# ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE 4 -# endif -#endif +#include <stdint.h> typedef int16_t i2c_status_t; diff --git a/platforms/chibios/gpio.h b/platforms/chibios/gpio.h index 4d057f1cab..eb44a18f9c 100644 --- a/platforms/chibios/gpio.h +++ b/platforms/chibios/gpio.h @@ -22,10 +22,12 @@ typedef ioline_t pin_t; /* Operation of GPIO by pin. */ -#define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT) -#define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP) -#define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN) -#define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL) +#define setPinInput(pin) palSetLineMode((pin), PAL_MODE_INPUT) +#define setPinInputHigh(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLUP) +#define setPinInputLow(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLDOWN) +#define setPinOutputPushPull(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_PUSHPULL) +#define setPinOutputOpenDrain(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_OPENDRAIN) +#define setPinOutput(pin) setPinOutputPushPull(pin) #define writePinHigh(pin) palSetLine(pin) #define writePinLow(pin) palClearLine(pin) @@ -34,17 +36,3 @@ typedef ioline_t pin_t; #define readPin(pin) palReadLine(pin) #define togglePin(pin) palToggleLine(pin) - -/* Operation of GPIO by port. */ - -typedef uint16_t port_data_t; - -#define readPort(pin) palReadPort(PAL_PORT(pin)) - -#define setPortBitInput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT) -#define setPortBitInputHigh(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLUP) -#define setPortBitInputLow(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLDOWN) -#define setPortBitOutput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_OUTPUT_PUSHPULL) - -#define writePortBitLow(pin, bit) palClearLine(PAL_LINE(PAL_PORT(pin), bit)) -#define writePortBitHigh(pin, bit) palSetLine(PAL_LINE(PAL_PORT(pin), bit)) diff --git a/platforms/common.mk b/platforms/common.mk index f7a0fc7028..12ab45f823 100644 --- a/platforms/common.mk +++ b/platforms/common.mk @@ -4,7 +4,7 @@ TMK_COMMON_SRC += \ $(PLATFORM_COMMON_DIR)/platform.c \ $(PLATFORM_COMMON_DIR)/suspend.c \ $(PLATFORM_COMMON_DIR)/timer.c \ - $(PLATFORM_COMMON_DIR)/bootloader.c \ + $(PLATFORM_COMMON_DIR)/bootloaders/$(BOOTLOADER_TYPE).c # Search Path VPATH += $(PLATFORM_PATH) diff --git a/platforms/test/bootloader.c b/platforms/test/bootloaders/none.c index 5155d9ff04..5155d9ff04 100644 --- a/platforms/test/bootloader.c +++ b/platforms/test/bootloaders/none.c diff --git a/quantum/action.c b/quantum/action.c index 5e81efb671..ea2310a4d9 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -794,7 +794,7 @@ void process_action(keyrecord_t *record, action_t action) { * * FIXME: Needs documentation. */ -void register_code(uint8_t code) { +__attribute__((weak)) void register_code(uint8_t code) { if (code == KC_NO) { return; } @@ -890,7 +890,7 @@ void register_code(uint8_t code) { * * FIXME: Needs documentation. */ -void unregister_code(uint8_t code) { +__attribute__((weak)) void unregister_code(uint8_t code) { if (code == KC_NO) { return; } @@ -955,7 +955,7 @@ void unregister_code(uint8_t code) { * \param code The basic keycode to tap. * \param delay The amount of time in milliseconds to leave the keycode registered, before unregistering it. */ -void tap_code_delay(uint8_t code, uint16_t delay) { +__attribute__((weak)) void tap_code_delay(uint8_t code, uint16_t delay) { register_code(code); for (uint16_t i = delay; i > 0; i--) { wait_ms(1); @@ -967,13 +967,13 @@ void tap_code_delay(uint8_t code, uint16_t delay) { * * \param code The basic keycode to tap. If `code` is `KC_CAPS_LOCK`, the delay will be `TAP_HOLD_CAPS_DELAY`, otherwise `TAP_CODE_DELAY`, if defined. */ -void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); } +__attribute__((weak)) void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); } /** \brief Adds the given physically pressed modifiers and sends a keyboard report immediately. * * \param mods A bitfield of modifiers to register. */ -void register_mods(uint8_t mods) { +__attribute__((weak)) void register_mods(uint8_t mods) { if (mods) { add_mods(mods); send_keyboard_report(); @@ -984,7 +984,7 @@ void register_mods(uint8_t mods) { * * \param mods A bitfield of modifiers to unregister. */ -void unregister_mods(uint8_t mods) { +__attribute__((weak)) void unregister_mods(uint8_t mods) { if (mods) { del_mods(mods); send_keyboard_report(); @@ -995,7 +995,7 @@ void unregister_mods(uint8_t mods) { * * \param mods A bitfield of modifiers to register. */ -void register_weak_mods(uint8_t mods) { +__attribute__((weak)) void register_weak_mods(uint8_t mods) { if (mods) { add_weak_mods(mods); send_keyboard_report(); @@ -1006,7 +1006,7 @@ void register_weak_mods(uint8_t mods) { * * \param mods A bitfield of modifiers to unregister. */ -void unregister_weak_mods(uint8_t mods) { +__attribute__((weak)) void unregister_weak_mods(uint8_t mods) { if (mods) { del_weak_mods(mods); send_keyboard_report(); diff --git a/quantum/action_util.c b/quantum/action_util.c index 78e02aec18..7e30593fb1 100644 --- a/quantum/action_util.c +++ b/quantum/action_util.c @@ -21,6 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "action_layer.h" #include "timer.h" #include "keycode_config.h" +#include <string.h> extern keymap_config_t keymap_config; @@ -247,7 +248,13 @@ void send_keyboard_report(void) { keyboard_report->mods |= weak_override_mods; #endif - host_keyboard_send(keyboard_report); + static report_keyboard_t last_report; + + /* Only send the report if there are changes to propagate to the host. */ + if (memcmp(keyboard_report, &last_report, sizeof(report_keyboard_t)) != 0) { + memcpy(&last_report, keyboard_report, sizeof(report_keyboard_t)); + host_keyboard_send(keyboard_report); + } } /** \brief Get mods diff --git a/quantum/audio/audio.c b/quantum/audio/audio.c index 49bb309e80..b3d6389dd5 100644 --- a/quantum/audio/audio.c +++ b/quantum/audio/audio.c @@ -160,6 +160,8 @@ void audio_toggle(void) { eeconfig_update_audio(audio_config.raw); if (audio_config.enable) { audio_on_user(); + } else { + audio_off_user(); } } @@ -172,6 +174,7 @@ void audio_on(void) { void audio_off(void) { PLAY_SONG(audio_off_song); + audio_off_user(); wait_ms(100); audio_stop_all(); audio_config.enable = 0; diff --git a/quantum/debounce.h b/quantum/debounce.h index 5043868289..3532d9cd7b 100644 --- a/quantum/debounce.h +++ b/quantum/debounce.h @@ -6,8 +6,6 @@ // changed is true if raw has changed since the last call void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed); -bool debounce_active(void); - void debounce_init(uint8_t num_rows); void debounce_free(void); diff --git a/quantum/debounce/asym_eager_defer_pk.c b/quantum/debounce/asym_eager_defer_pk.c index 81f39383c4..b1eb4a2b7b 100644 --- a/quantum/debounce/asym_eager_defer_pk.c +++ b/quantum/debounce/asym_eager_defer_pk.c @@ -165,7 +165,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui } } -bool debounce_active(void) { return true; } #else # include "none.c" #endif diff --git a/quantum/debounce/none.c b/quantum/debounce/none.c index b03892bc5b..8a85cc04a8 100644 --- a/quantum/debounce/none.c +++ b/quantum/debounce/none.c @@ -26,6 +26,4 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool } } -bool debounce_active(void) { return false; } - void debounce_free(void) {} diff --git a/quantum/debounce/sym_defer_g.c b/quantum/debounce/sym_defer_g.c index 9155eb914c..8cac1c37f9 100644 --- a/quantum/debounce/sym_defer_g.c +++ b/quantum/debounce/sym_defer_g.c @@ -44,8 +44,6 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool } } -bool debounce_active(void) { return debouncing; } - void debounce_free(void) {} #else // no debouncing. # include "none.c" diff --git a/quantum/debounce/sym_defer_pk.c b/quantum/debounce/sym_defer_pk.c index 1b698ba347..9dee29e28e 100644 --- a/quantum/debounce/sym_defer_pk.c +++ b/quantum/debounce/sym_defer_pk.c @@ -134,7 +134,6 @@ static void start_debounce_counters(matrix_row_t raw[], matrix_row_t cooked[], u } } -bool debounce_active(void) { return true; } #else # include "none.c" #endif diff --git a/quantum/debounce/sym_defer_pr.c b/quantum/debounce/sym_defer_pr.c new file mode 100644 index 0000000000..8b33acc6a2 --- /dev/null +++ b/quantum/debounce/sym_defer_pr.c @@ -0,0 +1,72 @@ +/* +Copyright 2021 Chad Austin <chad@chadaustin.me> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* +Symmetric per-row debounce algorithm. Changes only apply when +DEBOUNCE milliseconds have elapsed since the last change. +*/ + +#include "matrix.h" +#include "timer.h" +#include "quantum.h" +#include <stdlib.h> + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +static uint16_t last_time; +// [row] milliseconds until key's state is considered debounced. +static uint8_t* countdowns; +// [row] +static matrix_row_t* last_raw; + +void debounce_init(uint8_t num_rows) { + countdowns = (uint8_t*)calloc(num_rows, sizeof(uint8_t)); + last_raw = (matrix_row_t*)calloc(num_rows, sizeof(matrix_row_t)); + + last_time = timer_read(); +} + +void debounce_free(void) { + free(countdowns); + countdowns = NULL; + free(last_raw); + last_raw = NULL; +} + +void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) { + uint16_t now = timer_read(); + uint16_t elapsed16 = TIMER_DIFF_16(now, last_time); + last_time = now; + uint8_t elapsed = (elapsed16 > 255) ? 255 : elapsed16; + + uint8_t* countdown = countdowns; + + for (uint8_t row = 0; row < num_rows; ++row, ++countdown) { + matrix_row_t raw_row = raw[row]; + + if (raw_row != last_raw[row]) { + *countdown = DEBOUNCE; + last_raw[row] = raw_row; + } else if (*countdown > elapsed) { + *countdown -= elapsed; + } else if (*countdown) { + cooked[row] = raw_row; + *countdown = 0; + } + } +} + +bool debounce_active(void) { return true; } diff --git a/quantum/debounce/sym_eager_pk.c b/quantum/debounce/sym_eager_pk.c index 9da000ea9a..deec463649 100644 --- a/quantum/debounce/sym_eager_pk.c +++ b/quantum/debounce/sym_eager_pk.c @@ -140,7 +140,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui } } -bool debounce_active(void) { return true; } #else # include "none.c" #endif diff --git a/quantum/debounce/sym_eager_pr.c b/quantum/debounce/sym_eager_pr.c index eda92a263b..29b0cabefb 100644 --- a/quantum/debounce/sym_eager_pr.c +++ b/quantum/debounce/sym_eager_pr.c @@ -132,7 +132,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui } } -bool debounce_active(void) { return true; } #else # include "none.c" #endif diff --git a/quantum/debounce/tests/rules.mk b/quantum/debounce/tests/rules.mk index e908dd6f67..8318b1c668 100644 --- a/quantum/debounce/tests/rules.mk +++ b/quantum/debounce/tests/rules.mk @@ -28,6 +28,11 @@ debounce_sym_defer_pk_SRC := $(DEBOUNCE_COMMON_SRC) \ $(QUANTUM_PATH)/debounce/sym_defer_pk.c \ $(QUANTUM_PATH)/debounce/tests/sym_defer_pk_tests.cpp +debounce_sym_defer_pr_DEFS := $(DEBOUNCE_COMMON_DEFS) +debounce_sym_defer_pr_SRC := $(DEBOUNCE_COMMON_SRC) \ + $(QUANTUM_PATH)/debounce/sym_defer_pr.c \ + $(QUANTUM_PATH)/debounce/tests/sym_defer_pr_tests.cpp + debounce_sym_eager_pk_DEFS := $(DEBOUNCE_COMMON_DEFS) debounce_sym_eager_pk_SRC := $(DEBOUNCE_COMMON_SRC) \ $(QUANTUM_PATH)/debounce/sym_eager_pk.c \ diff --git a/quantum/debounce/tests/sym_defer_pr_tests.cpp b/quantum/debounce/tests/sym_defer_pr_tests.cpp new file mode 100644 index 0000000000..417e1f4ca2 --- /dev/null +++ b/quantum/debounce/tests/sym_defer_pr_tests.cpp @@ -0,0 +1,238 @@ +/* Copyright 2021 Simon Arlott + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "gtest/gtest.h" + +#include "debounce_test_common.h" + +TEST_F(DebounceTest, OneKeyShort1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + /* 0ms delay (fast scan rate) */ + {5, {{0, 1, UP}}, {}}, + + {10, {}, {{0, 1, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyShort2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + /* 1ms delay */ + {6, {{0, 1, UP}}, {}}, + + {11, {}, {{0, 1, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyShort3) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + /* 2ms delay */ + {7, {{0, 1, UP}}, {}}, + + {12, {}, {{0, 1, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyTooQuick1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + /* Release key exactly on the debounce time */ + {5, {{0, 1, UP}}, {}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyTooQuick2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + {6, {{0, 1, UP}}, {}}, + + /* Press key exactly on the debounce time */ + {11, {{0, 1, DOWN}}, {}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyBouncing1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + {1, {{0, 1, UP}}, {}}, + {2, {{0, 1, DOWN}}, {}}, + {3, {{0, 1, UP}}, {}}, + {4, {{0, 1, DOWN}}, {}}, + {5, {{0, 1, UP}}, {}}, + {6, {{0, 1, DOWN}}, {}}, + {11, {}, {{0, 1, DOWN}}}, /* 5ms after DOWN at time 7 */ + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyBouncing2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + {5, {}, {{0, 1, DOWN}}}, + {6, {{0, 1, UP}}, {}}, + {7, {{0, 1, DOWN}}, {}}, + {8, {{0, 1, UP}}, {}}, + {9, {{0, 1, DOWN}}, {}}, + {10, {{0, 1, UP}}, {}}, + {15, {}, {{0, 1, UP}}}, /* 5ms after UP at time 10 */ + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyLong) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + + {25, {{0, 1, UP}}, {}}, + + {30, {}, {{0, 1, UP}}}, + + {50, {{0, 1, DOWN}}, {}}, + + {55, {}, {{0, 1, DOWN}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, TwoKeysShort) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + {1, {{0, 2, DOWN}}, {}}, + + {6, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, + + {7, {{0, 1, UP}}, {}}, + {8, {{0, 2, UP}}, {}}, + + {13, {}, {{0, 1, UP}, {0, 2, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, TwoKeysSimultaneous1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, + {6, {{0, 1, UP}, {0, 2, UP}}, {}}, + + {11, {}, {{0, 1, UP}, {0, 2, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, TwoKeysSimultaneous2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + {1, {{0, 2, DOWN}}, {}}, + + {6, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, + {7, {{0, 2, UP}}, {}}, + {9, {{0, 1, UP}}, {}}, + + // Debouncing loses the specific ordering -- both events report simultaneously. + {14, {}, {{0, 1, UP}, {0, 2, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyDelayedScan1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + /* Processing is very late */ + {300, {}, {{0, 1, DOWN}}}, + /* Immediately release key */ + {300, {{0, 1, UP}}, {}}, + + {305, {}, {{0, 1, UP}}}, + }); + time_jumps_ = true; + runEvents(); +} + +TEST_F(DebounceTest, OneKeyDelayedScan2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + /* Processing is very late */ + {300, {}, {{0, 1, DOWN}}}, + /* Release key after 1ms */ + {301, {{0, 1, UP}}, {}}, + + {306, {}, {{0, 1, UP}}}, + }); + time_jumps_ = true; + runEvents(); +} + +TEST_F(DebounceTest, OneKeyDelayedScan3) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + /* Release key before debounce expires */ + {300, {{0, 1, UP}}, {}}, + }); + time_jumps_ = true; + runEvents(); +} + +TEST_F(DebounceTest, OneKeyDelayedScan4) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + /* Processing is a bit late */ + {50, {}, {{0, 1, DOWN}}}, + /* Release key after 1ms */ + {51, {{0, 1, UP}}, {}}, + + {56, {}, {{0, 1, UP}}}, + }); + time_jumps_ = true; + runEvents(); +} diff --git a/quantum/debounce/tests/testlist.mk b/quantum/debounce/tests/testlist.mk index c54c45aa63..f7bd520698 100644 --- a/quantum/debounce/tests/testlist.mk +++ b/quantum/debounce/tests/testlist.mk @@ -1,6 +1,7 @@ TEST_LIST += \ debounce_sym_defer_g \ debounce_sym_defer_pk \ + debounce_sym_defer_pr \ debounce_sym_eager_pk \ debounce_sym_eager_pr \ debounce_asym_eager_defer_pk diff --git a/quantum/matrix.c b/quantum/matrix.c index 483d518ecc..a58cc752fb 100644 --- a/quantum/matrix.c +++ b/quantum/matrix.c @@ -63,17 +63,13 @@ extern matrix_row_t matrix[MATRIX_ROWS]; // debounced values #ifdef SPLIT_KEYBOARD // row offsets for each hand -uint8_t thisHand, thatHand; +extern uint8_t thisHand, thatHand; #endif // user-defined overridable functions __attribute__((weak)) void matrix_init_pins(void); __attribute__((weak)) void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); __attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col, matrix_row_t row_shifter); -#ifdef SPLIT_KEYBOARD -__attribute__((weak)) void matrix_slave_scan_kb(void) { matrix_slave_scan_user(); } -__attribute__((weak)) void matrix_slave_scan_user(void) {} -#endif static inline void setPinOutput_writeLow(pin_t pin) { ATOMIC_BLOCK_FORCEON { @@ -308,35 +304,6 @@ __attribute__((weak)) bool transport_master_if_connected(matrix_row_t master_mat transport_master(master_matrix, slave_matrix); return true; // Treat the transport as always connected } - -bool matrix_post_scan(void) { - bool changed = false; - if (is_keyboard_master()) { - static bool last_connected = false; - matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; - if (transport_master_if_connected(matrix + thisHand, slave_matrix)) { - changed = memcmp(matrix + thatHand, slave_matrix, sizeof(slave_matrix)) != 0; - - last_connected = true; - } else if (last_connected) { - // reset other half when disconnected - memset(slave_matrix, 0, sizeof(slave_matrix)); - changed = true; - - last_connected = false; - } - - if (changed) memcpy(matrix + thatHand, slave_matrix, sizeof(slave_matrix)); - - matrix_scan_quantum(); - } else { - transport_slave(matrix + thatHand, matrix + thisHand); - - matrix_slave_scan_kb(); - } - - return changed; -} #endif uint8_t matrix_scan(void) { diff --git a/quantum/matrix.h b/quantum/matrix.h index 5c696622fc..d968efeb0f 100644 --- a/quantum/matrix.h +++ b/quantum/matrix.h @@ -46,8 +46,6 @@ void matrix_setup(void); void matrix_init(void); /* scan all key states on matrix */ uint8_t matrix_scan(void); -/* whether modified from previous scan. used after matrix_scan. */ -bool matrix_is_modified(void) __attribute__((deprecated)); /* whether a switch is on */ bool matrix_is_on(uint8_t row, uint8_t col); /* matrix state on row */ @@ -75,6 +73,7 @@ void matrix_init_user(void); void matrix_scan_user(void); #ifdef SPLIT_KEYBOARD +bool matrix_post_scan(void); void matrix_slave_scan_kb(void); void matrix_slave_scan_user(void); #endif diff --git a/quantum/matrix_common.c b/quantum/matrix_common.c index 66c89970b1..98b83ddcf6 100644 --- a/quantum/matrix_common.c +++ b/quantum/matrix_common.c @@ -4,6 +4,15 @@ #include "wait.h" #include "print.h" #include "debug.h" +#ifdef SPLIT_KEYBOARD +# include "split_common/split_util.h" +# include "split_common/transactions.h" +# include <string.h> + +# define ROWS_PER_HAND (MATRIX_ROWS / 2) +#else +# define ROWS_PER_HAND (MATRIX_ROWS) +#endif #ifndef MATRIX_IO_DELAY # define MATRIX_IO_DELAY 30 @@ -13,6 +22,11 @@ matrix_row_t raw_matrix[MATRIX_ROWS]; matrix_row_t matrix[MATRIX_ROWS]; +#ifdef SPLIT_KEYBOARD +// row offsets for each hand +uint8_t thisHand, thatHand; +#endif + #ifdef MATRIX_MASKED extern const matrix_row_t matrix_mask[]; #endif @@ -45,12 +59,6 @@ inline matrix_row_t matrix_get_row(uint8_t row) { #endif } -// Deprecated. -bool matrix_is_modified(void) { - if (debounce_active()) return false; - return true; -} - #if (MATRIX_COLS <= 8) # define print_matrix_header() print("\nr/c 01234567\n") # define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) @@ -84,18 +92,59 @@ uint8_t matrix_key_count(void) { return count; } +#ifdef SPLIT_KEYBOARD +bool matrix_post_scan(void) { + bool changed = false; + if (is_keyboard_master()) { + static bool last_connected = false; + matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; + if (transport_master_if_connected(matrix + thisHand, slave_matrix)) { + changed = memcmp(matrix + thatHand, slave_matrix, sizeof(slave_matrix)) != 0; + + last_connected = true; + } else if (last_connected) { + // reset other half when disconnected + memset(slave_matrix, 0, sizeof(slave_matrix)); + changed = true; + + last_connected = false; + } + + if (changed) memcpy(matrix + thatHand, slave_matrix, sizeof(slave_matrix)); + + matrix_scan_quantum(); + } else { + transport_slave(matrix + thatHand, matrix + thisHand); + + matrix_slave_scan_kb(); + } + + return changed; +} +#endif + /*　`matrix_io_delay ()` exists for backwards compatibility. From now on, use matrix_output_unselect_delay().　*/ __attribute__((weak)) void matrix_io_delay(void) { wait_us(MATRIX_IO_DELAY); } - __attribute__((weak)) void matrix_output_select_delay(void) { waitInputPinDelay(); } __attribute__((weak)) void matrix_output_unselect_delay(uint8_t line, bool key_pressed) { matrix_io_delay(); } // CUSTOM MATRIX 'LITE' __attribute__((weak)) void matrix_init_custom(void) {} - __attribute__((weak)) bool matrix_scan_custom(matrix_row_t current_matrix[]) { return true; } +#ifdef SPLIT_KEYBOARD +__attribute__((weak)) void matrix_slave_scan_kb(void) { matrix_slave_scan_user(); } +__attribute__((weak)) void matrix_slave_scan_user(void) {} +#endif + __attribute__((weak)) void matrix_init(void) { +#ifdef SPLIT_KEYBOARD + split_pre_init(); + + thisHand = isLeftHand ? 0 : (ROWS_PER_HAND); + thatHand = ROWS_PER_HAND - thisHand; +#endif + matrix_init_custom(); // initialize matrix state: all keys off @@ -104,17 +153,26 @@ __attribute__((weak)) void matrix_init(void) { matrix[i] = 0; } - debounce_init(MATRIX_ROWS); + debounce_init(ROWS_PER_HAND); matrix_init_quantum(); + +#ifdef SPLIT_KEYBOARD + split_post_init(); +#endif } __attribute__((weak)) uint8_t matrix_scan(void) { bool changed = matrix_scan_custom(raw_matrix); - debounce(raw_matrix, matrix, MATRIX_ROWS, changed); - +#ifdef SPLIT_KEYBOARD + debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); + changed = (changed || matrix_post_scan()); +#else + debounce(raw_matrix, matrix, ROWS_PER_HAND, changed); matrix_scan_quantum(); +#endif + return changed; } diff --git a/quantum/pointing_device.c b/quantum/pointing_device.c index 2fefdb67b6..23d93fa15f 100644 --- a/quantum/pointing_device.c +++ b/quantum/pointing_device.c @@ -18,24 +18,105 @@ #include "pointing_device.h" #include <string.h> +#include "timer.h" #ifdef MOUSEKEY_ENABLE # include "mousekey.h" #endif #if (defined(POINTING_DEVICE_ROTATION_90) + defined(POINTING_DEVICE_ROTATION_180) + defined(POINTING_DEVICE_ROTATION_270)) > 1 # error More than one rotation selected. This is not supported. #endif +#if defined(SPLIT_POINTING_ENABLE) +# include "transactions.h" +# include "keyboard.h" -static report_mouse_t mouseReport = {}; +report_mouse_t shared_mouse_report = {}; +uint16_t shared_cpi = 0; + +/** + * @brief Sets the shared mouse report used be pointing device task + * + * NOTE : Only available when using SPLIT_POINTING_ENABLE + * + * @param[in] new_mouse_report report_mouse_t + */ +void pointing_device_set_shared_report(report_mouse_t new_mouse_report) { shared_mouse_report = new_mouse_report; } + +/** + * @brief Gets current pointing device CPI if supported + * + * Gets current cpi of the shared report and returns it as uint16_t + * + * NOTE : Only available when using SPLIT_POINTING_ENABLE + * + * @return cpi value as uint16_t + */ +uint16_t pointing_device_get_shared_cpi(void) { return shared_cpi; } + +# if defined(POINTING_DEVICE_LEFT) +# define POINTING_DEVICE_THIS_SIDE is_keyboard_left() +# elif defined(POINTING_DEVICE_RIGHT) +# define POINTING_DEVICE_THIS_SIDE !is_keyboard_left() +# elif defined(POINTING_DEVICE_COMBINED) +# define POINTING_DEVICE_THIS_SIDE true +# endif + +#endif // defined(SPLIT_POINTING_ENABLE) + +static report_mouse_t local_mouse_report = {}; extern const pointing_device_driver_t pointing_device_driver; +/** + * @brief Compares 2 mouse reports for difference and returns result + * + * @param[in] new report_mouse_t + * @param[in] old report_mouse_t + * @return bool result + */ __attribute__((weak)) bool has_mouse_report_changed(report_mouse_t new, report_mouse_t old) { return memcmp(&new, &old, sizeof(new)); } -__attribute__((weak)) void pointing_device_init_kb(void) {} -__attribute__((weak)) void pointing_device_init_user(void) {} +/** + * @brief Keyboard level code pointing device initialisation + * + */ +__attribute__((weak)) void pointing_device_init_kb(void) {} + +/** + * @brief User level code pointing device initialisation + * + */ +__attribute__((weak)) void pointing_device_init_user(void) {} + +/** + * @brief Weak function allowing for keyboard level mouse report modification + * + * Takes report_mouse_t struct allowing modification at keyboard level then returns report_mouse_t. + * + * @param[in] mouse_report report_mouse_t + * @return report_mouse_t + */ __attribute__((weak)) report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { return pointing_device_task_user(mouse_report); } + +/** + * @brief Weak function allowing for user level mouse report modification + * + * Takes report_mouse_t struct allowing modification at user level then returns report_mouse_t. + * + * @param[in] mouse_report report_mouse_t + * @return report_mouse_t + */ __attribute__((weak)) report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { return mouse_report; } +/** + * @brief Handles pointing device buttons + * + * Returns modified button bitmask using bool pressed and selected pointing_device_buttons_t button in uint8_t buttons bitmask. + * + * @param buttons[in] uint8_t bitmask + * @param pressed[in] bool + * @param button[in] pointing_device_buttons_t value + * @return Modified uint8_t bitmask buttons + */ __attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button) { if (pressed) { buttons |= 1 << (button); @@ -45,7 +126,17 @@ __attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bo return buttons; } +/** + * @brief Initialises pointing device + * + * Initialises pointing device, perform driver init and optional keyboard/user level code. + */ __attribute__((weak)) void pointing_device_init(void) { +#if defined(SPLIT_POINTING_ENABLE) + if (!(POINTING_DEVICE_THIS_SIDE)) { + return; + } +#endif pointing_device_driver.init(); #ifdef POINTING_DEVICE_MOTION_PIN setPinInputHigh(POINTING_DEVICE_MOTION_PIN); @@ -54,67 +145,299 @@ __attribute__((weak)) void pointing_device_init(void) { pointing_device_init_user(); } +/** + * @brief Sends processed mouse report to host + * + * This sends the mouse report generated by pointing_device_task if changed since the last report. Once send zeros mouse report except buttons. + * + */ __attribute__((weak)) void pointing_device_send(void) { static report_mouse_t old_report = {}; // If you need to do other things, like debugging, this is the place to do it. - if (has_mouse_report_changed(mouseReport, old_report)) { - host_mouse_send(&mouseReport); + if (has_mouse_report_changed(local_mouse_report, old_report)) { + host_mouse_send(&local_mouse_report); } // send it and 0 it out except for buttons, so those stay until they are explicity over-ridden using update_pointing_device - mouseReport.x = 0; - mouseReport.y = 0; - mouseReport.v = 0; - mouseReport.h = 0; + local_mouse_report.x = 0; + local_mouse_report.y = 0; + local_mouse_report.v = 0; + local_mouse_report.h = 0; - memcpy(&old_report, &mouseReport, sizeof(mouseReport)); + memcpy(&old_report, &local_mouse_report, sizeof(local_mouse_report)); } -__attribute__((weak)) void pointing_device_task(void) { - // Gather report info -#ifdef POINTING_DEVICE_MOTION_PIN - if (!readPin(POINTING_DEVICE_MOTION_PIN)) -#endif - mouseReport = pointing_device_driver.get_report(mouseReport); - - // Support rotation of the sensor data +/** + * @brief Adjust mouse report by any optional common pointing configuration defines + * + * This applies rotation or inversion to the mouse report as selected by the pointing device common configuration defines. + * + * @param mouse_report[in] takes a report_mouse_t to be adjusted + * @return report_mouse_t with adjusted values + */ +report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report) { + // Support rotation of the sensor data #if defined(POINTING_DEVICE_ROTATION_90) || defined(POINTING_DEVICE_ROTATION_180) || defined(POINTING_DEVICE_ROTATION_270) - int8_t x = mouseReport.x, y = mouseReport.y; + int8_t x = mouse_report.x, y = mouse_report.y; # if defined(POINTING_DEVICE_ROTATION_90) - mouseReport.x = y; - mouseReport.y = -x; + mouse_report.x = y; + mouse_report.y = -x; # elif defined(POINTING_DEVICE_ROTATION_180) - mouseReport.x = -x; - mouseReport.y = -y; + mouse_report.x = -x; + mouse_report.y = -y; # elif defined(POINTING_DEVICE_ROTATION_270) - mouseReport.x = -y; - mouseReport.y = x; + mouse_report.x = -y; + mouse_report.y = x; # else # error "How the heck did you get here?!" # endif #endif // Support Inverting the X and Y Axises #if defined(POINTING_DEVICE_INVERT_X) - mouseReport.x = -mouseReport.x; + mouse_report.x = -mouse_report.x; #endif #if defined(POINTING_DEVICE_INVERT_Y) - mouseReport.y = -mouseReport.y; + mouse_report.y = -mouse_report.y; +#endif + return mouse_report; +} + +/** + * @brief Retrieves and processes pointing device data. + * + * This function is part of the keyboard loop and retrieves the mouse report from the pointing device driver. + * It applies any optional configuration e.g. rotation or axis inversion and then initiates a send. + * + */ +__attribute__((weak)) void pointing_device_task(void) { +#if defined(SPLIT_POINTING_ENABLE) + // Don't poll the target side pointing device. + if (!is_keyboard_master()) { + return; + }; +#endif + +#if defined(POINTING_DEVICE_TASK_THROTTLE_MS) + static uint32_t last_exec = 0; + if (timer_elapsed32(last_exec) < POINTING_DEVICE_TASK_THROTTLE_MS) { + return; + } + last_exec = timer_read32(); +#else +# if defined(SPLIT_POINTING_ENABLE) +# pragma message("It's recommended you enable a throttle when sharing pointing devices.") +# endif +#endif + + // Gather report info +#ifdef POINTING_DEVICE_MOTION_PIN +# if defined(SPLIT_POINTING_ENABLE) +# error POINTING_DEVICE_MOTION_PIN not supported when sharing the pointing device report between sides. +# endif + if (!readPin(POINTING_DEVICE_MOTION_PIN)) #endif +#if defined(SPLIT_POINTING_ENABLE) +# if defined(POINTING_DEVICE_COMBINED) + static uint8_t old_buttons = 0; + local_mouse_report.buttons = old_buttons; + local_mouse_report = pointing_device_driver.get_report(local_mouse_report); + old_buttons = local_mouse_report.buttons; +# elif defined(POINTING_DEVICE_LEFT) || defined(POINTING_DEVICE_RIGHT) + local_mouse_report = POINTING_DEVICE_THIS_SIDE ? pointing_device_driver.get_report(local_mouse_report) : shared_mouse_report; +# else +# error "You need to define the side(s) the pointing device is on. POINTING_DEVICE_COMBINED / POINTING_DEVICE_LEFT / POINTING_DEVICE_RIGHT" +# endif +#else + local_mouse_report = pointing_device_driver.get_report(local_mouse_report); +#endif // defined(SPLIT_POINTING_ENABLE) + // allow kb to intercept and modify report - mouseReport = pointing_device_task_kb(mouseReport); +#if defined(SPLIT_POINTING_ENABLE) && defined(POINTING_DEVICE_COMBINED) + if (is_keyboard_left()) { + local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report); + shared_mouse_report = pointing_device_adjust_by_defines_right(shared_mouse_report); + } else { + local_mouse_report = pointing_device_adjust_by_defines_right(local_mouse_report); + shared_mouse_report = pointing_device_adjust_by_defines(shared_mouse_report); + } + local_mouse_report = is_keyboard_left() ? pointing_device_task_combined_kb(local_mouse_report, shared_mouse_report) : pointing_device_task_combined_kb(shared_mouse_report, local_mouse_report); +#else + local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report); + local_mouse_report = pointing_device_task_kb(local_mouse_report); +#endif // combine with mouse report to ensure that the combined is sent correctly #ifdef MOUSEKEY_ENABLE report_mouse_t mousekey_report = mousekey_get_report(); - mouseReport.buttons = mouseReport.buttons | mousekey_report.buttons; + local_mouse_report.buttons = local_mouse_report.buttons | mousekey_report.buttons; #endif pointing_device_send(); } -report_mouse_t pointing_device_get_report(void) { return mouseReport; } +/** + * @brief Gets current mouse report used by pointing device task + * + * @return report_mouse_t + */ +report_mouse_t pointing_device_get_report(void) { return local_mouse_report; } + +/** + * @brief Sets mouse report used be pointing device task + * + * @param[in] new_mouse_report + */ +void pointing_device_set_report(report_mouse_t new_mouse_report) { local_mouse_report = new_mouse_report; } + +/** + * @brief Gets current pointing device CPI if supported + * + * Gets current cpi from pointing device driver if supported and returns it as uint16_t + * + * @return cpi value as uint16_t + */ +uint16_t pointing_device_get_cpi(void) { +#if defined(SPLIT_POINTING_ENABLE) + return POINTING_DEVICE_THIS_SIDE ? pointing_device_driver.get_cpi() : shared_cpi; +#else + return pointing_device_driver.get_cpi(); +#endif +} -void pointing_device_set_report(report_mouse_t newMouseReport) { mouseReport = newMouseReport; } +/** + * @brief Set pointing device CPI if supported + * + * Takes a uint16_t value to set pointing device cpi if supported by driver. + * + * @param[in] cpi uint16_t value. + */ +void pointing_device_set_cpi(uint16_t cpi) { +#if defined(SPLIT_POINTING_ENABLE) + if (POINTING_DEVICE_THIS_SIDE) { + pointing_device_driver.set_cpi(cpi); + } else { + shared_cpi = cpi; + } +#else + pointing_device_driver.set_cpi(cpi); +#endif +} -uint16_t pointing_device_get_cpi(void) { return pointing_device_driver.get_cpi(); } +#if defined(SPLIT_POINTING_ENABLE) && defined(POINTING_DEVICE_COMBINED) +/** + * @brief Set pointing device CPI if supported + * + * Takes a bool and uint16_t and allows setting cpi for a single side when using 2 pointing devices with a split keyboard. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left true = left, false = right. + * @param[in] cpi uint16_t value. + */ +void pointing_device_set_cpi_on_side(bool left, uint16_t cpi) { + bool local = (is_keyboard_left() & left) ? true : false; + if (local) { + pointing_device_driver.set_cpi(cpi); + } else { + shared_cpi = cpi; + } +} -void pointing_device_set_cpi(uint16_t cpi) { pointing_device_driver.set_cpi(cpi); } +/** + * @brief clamps int16_t to int8_t + * + * @param[in] int16_t value + * @return int8_t clamped value + */ +static inline int8_t pointing_device_movement_clamp(int16_t value) { + if (value < INT8_MIN) { + return INT8_MIN; + } else if (value > INT8_MAX) { + return INT8_MAX; + } else { + return value; + } +} + +/** + * @brief combines 2 mouse reports and returns 2 + * + * Combines 2 report_mouse_t structs, clamping movement values to int8_t and ignores report_id then returns the resulting report_mouse_t struct. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report left report_mouse_t + * @param[in] right_report right report_mouse_t + * @return combined report_mouse_t of left_report and right_report + */ +report_mouse_t pointing_device_combine_reports(report_mouse_t left_report, report_mouse_t right_report) { + left_report.x = pointing_device_movement_clamp((int16_t)left_report.x + right_report.x); + left_report.y = pointing_device_movement_clamp((int16_t)left_report.y + right_report.y); + left_report.h = pointing_device_movement_clamp((int16_t)left_report.h + right_report.h); + left_report.v = pointing_device_movement_clamp((int16_t)left_report.v + right_report.v); + left_report.buttons |= right_report.buttons; + return left_report; +} + +/** + * @brief Adjust mouse report by any optional right pointing configuration defines + * + * This applies rotation or inversion to the mouse report as selected by the pointing device common configuration defines. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] mouse_report report_mouse_t to be adjusted + * @return report_mouse_t with adjusted values + */ +report_mouse_t pointing_device_adjust_by_defines_right(report_mouse_t mouse_report) { + // Support rotation of the sensor data +# if defined(POINTING_DEVICE_ROTATION_90_RIGHT) || defined(POINTING_DEVICE_ROTATION_RIGHT) || defined(POINTING_DEVICE_ROTATION_RIGHT) + int8_t x = mouse_report.x, y = mouse_report.y; +# if defined(POINTING_DEVICE_ROTATION_90_RIGHT) + mouse_report.x = y; + mouse_report.y = -x; +# elif defined(POINTING_DEVICE_ROTATION_180_RIGHT) + mouse_report.x = -x; + mouse_report.y = -y; +# elif defined(POINTING_DEVICE_ROTATION_270_RIGHT) + mouse_report.x = -y; + mouse_report.y = x; +# else +# error "How the heck did you get here?!" +# endif +# endif + // Support Inverting the X and Y Axises +# if defined(POINTING_DEVICE_INVERT_X_RIGHT) + mouse_report.x = -mouse_report.x; +# endif +# if defined(POINTING_DEVICE_INVERT_Y_RIGHT) + mouse_report.y = -mouse_report.y; +# endif + return mouse_report; +} + +/** + * @brief Weak function allowing for keyboard level mouse report modification + * + * Takes 2 report_mouse_t structs allowing individual modification of sides at keyboard level then returns pointing_device_task_combined_user. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report report_mouse_t + * @param[in] right_report report_mouse_t + * @return pointing_device_task_combined_user(left_report, right_report) by default + */ +__attribute__((weak)) report_mouse_t pointing_device_task_combined_kb(report_mouse_t left_report, report_mouse_t right_report) { return pointing_device_task_combined_user(left_report, right_report); } + +/** + * @brief Weak function allowing for user level mouse report modification + * + * Takes 2 report_mouse_t structs allowing individual modification of sides at user level then returns pointing_device_combine_reports. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report report_mouse_t + * @param[in] right_report report_mouse_t + * @return pointing_device_combine_reports(left_report, right_report) by default + */ +__attribute__((weak)) report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) { return pointing_device_combine_reports(left_report, right_report); } +#endif diff --git a/quantum/pointing_device.h b/quantum/pointing_device.h index 5106c26660..00229e8a24 100644 --- a/quantum/pointing_device.h +++ b/quantum/pointing_device.h @@ -86,3 +86,16 @@ void pointing_device_init_user(void); report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report); report_mouse_t pointing_device_task_user(report_mouse_t mouse_report); uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button); +report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report); + +#if defined(SPLIT_POINTING_ENABLE) +void pointing_device_set_shared_report(report_mouse_t report); +uint16_t pointing_device_get_shared_cpi(void); +# if defined(POINTING_DEVICE_COMBINED) +void pointing_device_set_cpi_on_side(bool left, uint16_t cpi); +report_mouse_t pointing_device_combine_reports(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_task_combined_kb(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_adjust_by_defines_right(report_mouse_t mouse_report); +# endif // defined(POINTING_DEVICE_COMBINED) +#endif // defined(SPLIT_POINTING_ENABLE) diff --git a/quantum/pointing_device_drivers.c b/quantum/pointing_device_drivers.c index 9ad5e76ba6..260a6d2eb4 100644 --- a/quantum/pointing_device_drivers.c +++ b/quantum/pointing_device_drivers.c @@ -165,14 +165,13 @@ const pointing_device_driver_t pointing_device_driver = { // clang-format on #elif defined(POINTING_DEVICE_DRIVER_pimoroni_trackball) -report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) { - static fast_timer_t throttle = 0; - static uint16_t debounce = 0; - static uint8_t error_count = 0; - pimoroni_data_t pimoroni_data = {0}; - static int16_t x_offset = 0, y_offset = 0; - - if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT && timer_elapsed_fast(throttle) >= PIMORONI_TRACKBALL_INTERVAL_MS) { +report_mouse_t pimoroni_trackball_get_report(report_mouse_t mouse_report) { + static uint16_t debounce = 0; + static uint8_t error_count = 0; + pimoroni_data_t pimoroni_data = {0}; + static int16_t x_offset = 0, y_offset = 0; + + if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT) { i2c_status_t status = read_pimoroni_trackball(&pimoroni_data); if (status == I2C_STATUS_SUCCESS) { @@ -195,22 +194,20 @@ report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) { } else { error_count++; } - throttle = timer_read_fast(); } return mouse_report; } // clang-format off const pointing_device_driver_t pointing_device_driver = { - .init = pimironi_trackball_device_init, - .get_report = pimorono_trackball_get_report, - .set_cpi = NULL, - .get_cpi = NULL + .init = pimoroni_trackball_device_init, + .get_report = pimoroni_trackball_get_report, + .set_cpi = pimoroni_trackball_set_cpi, + .get_cpi = pimoroni_trackball_get_cpi }; // clang-format on #elif defined(POINTING_DEVICE_DRIVER_pmw3360) - -static void init(void) { pmw3360_init(); } +static void pmw3360_device_init(void) { pmw3360_init(); } report_mouse_t pmw3360_get_report(report_mouse_t mouse_report) { report_pmw3360_t data = pmw3360_read_burst(); @@ -239,7 +236,7 @@ report_mouse_t pmw3360_get_report(report_mouse_t mouse_report) { // clang-format off const pointing_device_driver_t pointing_device_driver = { - .init = init, + .init = pmw3360_device_init, .get_report = pmw3360_get_report, .set_cpi = pmw3360_set_cpi, .get_cpi = pmw3360_get_cpi diff --git a/quantum/process_keycode/process_audio.c b/quantum/process_keycode/process_audio.c index 3b5fa8490b..23664721e8 100644 --- a/quantum/process_keycode/process_audio.c +++ b/quantum/process_keycode/process_audio.c @@ -57,3 +57,4 @@ void process_audio_noteoff(uint8_t note) { stop_note(compute_freq_for_midi_note( void process_audio_all_notes_off(void) { stop_all_notes(); } __attribute__((weak)) void audio_on_user() {} +__attribute__((weak)) void audio_off_user() {} diff --git a/quantum/process_keycode/process_audio.h b/quantum/process_keycode/process_audio.h index d89a834ea8..42cfab4af2 100644 --- a/quantum/process_keycode/process_audio.h +++ b/quantum/process_keycode/process_audio.h @@ -8,3 +8,4 @@ void process_audio_noteoff(uint8_t note); void process_audio_all_notes_off(void); void audio_on_user(void); +void audio_off_user(void); diff --git a/quantum/process_keycode/process_key_lock.c b/quantum/process_keycode/process_key_lock.c index 4bd58f0c1e..941a2c5780 100644 --- a/quantum/process_keycode/process_key_lock.c +++ b/quantum/process_keycode/process_key_lock.c @@ -56,6 +56,11 @@ static inline uint16_t translate_keycode(uint16_t keycode) { } } +void cancel_key_lock(void) { + watching = false; + UNSET_KEY_STATE(0x0); +} + bool process_key_lock(uint16_t *keycode, keyrecord_t *record) { // We start by categorizing the keypress event. In the event of a down // event, there are several possibilities: diff --git a/quantum/process_keycode/process_key_lock.h b/quantum/process_keycode/process_key_lock.h index baa0b39077..5159b0ba02 100644 --- a/quantum/process_keycode/process_key_lock.h +++ b/quantum/process_keycode/process_key_lock.h @@ -18,4 +18,5 @@ #include "quantum.h" +void cancel_key_lock(void); bool process_key_lock(uint16_t *keycode, keyrecord_t *record); diff --git a/quantum/process_keycode/process_magic.c b/quantum/process_keycode/process_magic.c index d5cff4f12a..6332be647c 100644 --- a/quantum/process_keycode/process_magic.c +++ b/quantum/process_keycode/process_magic.c @@ -44,6 +44,7 @@ bool process_magic(uint16_t keycode, keyrecord_t *record) { case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_ALT_GUI: case MAGIC_SWAP_LCTL_LGUI ... MAGIC_EE_HANDS_RIGHT: case MAGIC_TOGGLE_GUI: + case MAGIC_TOGGLE_CONTROL_CAPSLOCK: /* keymap config */ keymap_config.raw = eeconfig_read_keymap(); switch (keycode) { @@ -168,6 +169,9 @@ bool process_magic(uint16_t keycode, keyrecord_t *record) { case MAGIC_TOGGLE_GUI: keymap_config.no_gui = !keymap_config.no_gui; break; + case MAGIC_TOGGLE_CONTROL_CAPSLOCK: + keymap_config.swap_control_capslock = !keymap_config.swap_control_capslock; + break; } eeconfig_update_keymap(keymap_config.raw); diff --git a/quantum/process_keycode/process_printer.c b/quantum/process_keycode/process_printer.c index 82528cc680..0801f078ef 100644 --- a/quantum/process_keycode/process_printer.c +++ b/quantum/process_keycode/process_printer.c @@ -16,13 +16,14 @@ #include "process_printer.h" #include "action_util.h" +#include "uart.h" bool printing_enabled = false; uint8_t character_shift = 0; void enable_printing(void) { printing_enabled = true; - serial_init(); + uart_init(19200); } void disable_printing(void) { printing_enabled = false; } @@ -35,7 +36,7 @@ uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0 void print_char(char c) { USB_Disable(); - serial_send(c); + uart_write(c); USB_Init(); } diff --git a/quantum/process_keycode/process_printer.h b/quantum/process_keycode/process_printer.h index 3c6d06ff94..6f4d09f333 100644 --- a/quantum/process_keycode/process_printer.h +++ b/quantum/process_keycode/process_printer.h @@ -18,6 +18,4 @@ #include "quantum.h" -#include "protocol/serial.h" - bool process_printer(uint16_t keycode, keyrecord_t *record); diff --git a/quantum/quantum.c b/quantum/quantum.c index 35b6351e9d..c106f795d0 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -76,9 +76,9 @@ uint8_t extract_mod_bits(uint16_t code) { return mods_to_send; } -static void do_code16(uint16_t code, void (*f)(uint8_t)) { f(extract_mod_bits(code)); } +void do_code16(uint16_t code, void (*f)(uint8_t)) { f(extract_mod_bits(code)); } -void register_code16(uint16_t code) { +__attribute__((weak)) void register_code16(uint16_t code) { if (IS_MOD(code) || code == KC_NO) { do_code16(code, register_mods); } else { @@ -87,7 +87,7 @@ void register_code16(uint16_t code) { register_code(code); } -void unregister_code16(uint16_t code) { +__attribute__((weak)) void unregister_code16(uint16_t code) { unregister_code(code); if (IS_MOD(code) || code == KC_NO) { do_code16(code, unregister_mods); @@ -96,7 +96,7 @@ void unregister_code16(uint16_t code) { } } -void tap_code16(uint16_t code) { +__attribute__((weak)) void tap_code16(uint16_t code) { register_code16(code); #if TAP_CODE_DELAY > 0 wait_ms(TAP_CODE_DELAY); @@ -263,7 +263,7 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef TAP_DANCE_ENABLE process_tap_dance(keycode, record) && #endif -#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) +#if defined(UNICODE_COMMON_ENABLE) process_unicode_common(keycode, record) && #endif #ifdef LEADER_ENABLE @@ -387,7 +387,7 @@ void matrix_init_quantum() { #ifdef RGB_MATRIX_ENABLE rgb_matrix_init(); #endif -#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) +#if defined(UNICODE_COMMON_ENABLE) unicode_input_mode_init(); #endif #ifdef HAPTIC_ENABLE diff --git a/quantum/quantum.h b/quantum/quantum.h index 6927884e2f..5d3a665887 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -109,6 +109,10 @@ extern layer_state_t layer_state; # include "process_unicodemap.h" #endif +#ifdef UNICODE_COMMON_ENABLE +# include "process_unicode_common.h" +#endif + #ifdef KEY_OVERRIDE_ENABLE # include "process_key_override.h" #endif diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index e4d0167aac..3950a3bcae 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -597,6 +597,8 @@ enum quantum_keycodes { MACRO_30, MACRO_31, + MAGIC_TOGGLE_CONTROL_CAPSLOCK, + // Start of custom keycode range for keyboards and keymaps - always leave at the end SAFE_RANGE }; @@ -749,6 +751,7 @@ enum quantum_keycodes { #define CL_NORM MAGIC_UNSWAP_CONTROL_CAPSLOCK #define CL_CTRL MAGIC_CAPSLOCK_TO_CONTROL #define CL_CAPS MAGIC_UNCAPSLOCK_TO_CONTROL +#define CL_TOGG MAGIC_TOGGLE_CONTROL_CAPSLOCK #define LCG_SWP MAGIC_SWAP_LCTL_LGUI #define LCG_NRM MAGIC_UNSWAP_LCTL_LGUI diff --git a/quantum/split_common/split_util.h b/quantum/split_common/split_util.h index ef72043bb7..c7eabea233 100644 --- a/quantum/split_common/split_util.h +++ b/quantum/split_common/split_util.h @@ -2,7 +2,6 @@ #include <stdbool.h> #include <stdint.h> -#include <stdio.h> #include <stdlib.h> #include "matrix.h" diff --git a/quantum/split_common/transaction_id_define.h b/quantum/split_common/transaction_id_define.h index 535bc21aea..aa71c3621e 100644 --- a/quantum/split_common/transaction_id_define.h +++ b/quantum/split_common/transaction_id_define.h @@ -78,6 +78,12 @@ enum serial_transaction_id { PUT_ST7565, #endif // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE) +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + GET_POINTING_CHECKSUM, + GET_POINTING_DATA, + PUT_POINTING_CPI, +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) PUT_RPC_INFO, PUT_RPC_REQ_DATA, diff --git a/quantum/split_common/transactions.c b/quantum/split_common/transactions.c index 3ff87710e7..9622acb377 100644 --- a/quantum/split_common/transactions.c +++ b/quantum/split_common/transactions.c @@ -579,6 +579,82 @@ static void st7565_handlers_slave(matrix_row_t master_matrix[], matrix_row_t sla #endif // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE) //////////////////////////////////////////////////// +// POINTING + +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + +static bool pointing_handlers_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { +# if defined(POINTING_DEVICE_LEFT) + if (is_keyboard_left()) { + return true; + } +# elif defined(POINTING_DEVICE_RIGHT) + if (!is_keyboard_left()) { + return true; + } +# endif + static uint32_t last_update = 0; + static uint16_t last_cpi = 0; + report_mouse_t temp_state; + uint16_t temp_cpi; + bool okay = read_if_checksum_mismatch(GET_POINTING_CHECKSUM, GET_POINTING_DATA, &last_update, &temp_state, &split_shmem->pointing.report, sizeof(temp_state)); + if (okay) pointing_device_set_shared_report(temp_state); + temp_cpi = pointing_device_get_shared_cpi(); + if (temp_cpi && memcmp(&last_cpi, &temp_cpi, sizeof(temp_cpi)) != 0) { + memcpy(&split_shmem->pointing.cpi, &temp_cpi, sizeof(temp_cpi)); + okay = transport_write(PUT_POINTING_CPI, &split_shmem->pointing.cpi, sizeof(split_shmem->pointing.cpi)); + if (okay) { + last_cpi = temp_cpi; + } + } + return okay; +} + +extern const pointing_device_driver_t pointing_device_driver; + +static void pointing_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { +# if defined(POINTING_DEVICE_LEFT) + if (!is_keyboard_left()) { + return; + } +# elif defined(POINTING_DEVICE_RIGHT) + if (is_keyboard_left()) { + return; + } +# endif + report_mouse_t temp_report; + uint16_t temp_cpi; +# ifdef POINTING_DEVICE_TASK_THROTTLE_MS + static uint32_t last_exec = 0; + if (timer_elapsed32(last_exec) < POINTING_DEVICE_TASK_THROTTLE_MS) { + return; + } + last_exec = timer_read32(); +# endif + temp_cpi = pointing_device_driver.get_cpi(); + if (split_shmem->pointing.cpi && memcmp(&split_shmem->pointing.cpi, &temp_cpi, sizeof(temp_cpi)) != 0) { + pointing_device_driver.set_cpi(split_shmem->pointing.cpi); + } + memset(&temp_report, 0, sizeof(temp_report)); + temp_report = pointing_device_driver.get_report(temp_report); + memcpy(&split_shmem->pointing.report, &temp_report, sizeof(temp_report)); + // Now update the checksum given that the pointing has been written to + split_shmem->pointing.checksum = crc8(&temp_report, sizeof(temp_report)); +} + +# define TRANSACTIONS_POINTING_MASTER() TRANSACTION_HANDLER_MASTER(pointing) +# define TRANSACTIONS_POINTING_SLAVE() TRANSACTION_HANDLER_SLAVE(pointing) +# define TRANSACTIONS_POINTING_REGISTRATIONS [GET_POINTING_CHECKSUM] = trans_target2initiator_initializer(pointing.checksum), [GET_POINTING_DATA] = trans_target2initiator_initializer(pointing.report), [PUT_POINTING_CPI] = trans_initiator2target_initializer(pointing.cpi), + +#else // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + +# define TRANSACTIONS_POINTING_MASTER() +# define TRANSACTIONS_POINTING_SLAVE() +# define TRANSACTIONS_POINTING_REGISTRATIONS + +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + +//////////////////////////////////////////////////// uint8_t dummy; split_transaction_desc_t split_transaction_table[NUM_TOTAL_TRANSACTIONS] = { @@ -604,6 +680,7 @@ split_transaction_desc_t split_transaction_table[NUM_TOTAL_TRANSACTIONS] = { TRANSACTIONS_WPM_REGISTRATIONS TRANSACTIONS_OLED_REGISTRATIONS TRANSACTIONS_ST7565_REGISTRATIONS + TRANSACTIONS_POINTING_REGISTRATIONS // clang-format on #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) @@ -629,6 +706,7 @@ bool transactions_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix TRANSACTIONS_WPM_MASTER(); TRANSACTIONS_OLED_MASTER(); TRANSACTIONS_ST7565_MASTER(); + TRANSACTIONS_POINTING_MASTER(); return true; } @@ -647,6 +725,7 @@ void transactions_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[ TRANSACTIONS_WPM_SLAVE(); TRANSACTIONS_OLED_SLAVE(); TRANSACTIONS_ST7565_SLAVE(); + TRANSACTIONS_POINTING_SLAVE(); } #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) diff --git a/quantum/split_common/transport.h b/quantum/split_common/transport.h index 1d4f6ed0cd..31b804908b 100644 --- a/quantum/split_common/transport.h +++ b/quantum/split_common/transport.h @@ -106,6 +106,15 @@ typedef struct _split_mods_sync_t { } split_mods_sync_t; #endif // SPLIT_MODS_ENABLE +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) +# include "pointing_device.h" +typedef struct _split_slave_pointing_sync_t { + uint8_t checksum; + report_mouse_t report; + uint16_t cpi; +} split_slave_pointing_sync_t; +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) typedef struct _rpc_sync_info_t { int8_t transaction_id; @@ -173,6 +182,10 @@ typedef struct _split_shared_memory_t { uint8_t current_st7565_state; #endif // ST7565_ENABLE(OLED_ENABLE) && defined(SPLIT_ST7565_ENABLE) +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + split_slave_pointing_sync_t pointing; +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) rpc_sync_info_t rpc_info; uint8_t rpc_m2s_buffer[RPC_M2S_BUFFER_SIZE]; diff --git a/quantum/wpm.c b/quantum/wpm.c index 925e2c416e..62d4128b8e 100644 --- a/quantum/wpm.c +++ b/quantum/wpm.c @@ -22,33 +22,37 @@ // WPM Stuff static uint8_t current_wpm = 0; static uint32_t wpm_timer = 0; -#ifndef WPM_UNFILTERED -static uint32_t smoothing_timer = 0; -#endif /* The WPM calculation works by specifying a certain number of 'periods' inside * a ring buffer, and we count the number of keypresses which occur in each of * those periods. Then to calculate WPM, we add up all of the keypresses in * the whole ring buffer, divide by the number of keypresses in a 'word', and - * then adjust for how much time is captured by our ring buffer. Right now - * the ring buffer is hardcoded below to be six half-second periods, accounting - * for a total WPM sampling period of up to three seconds of typing. + * then adjust for how much time is captured by our ring buffer. The size + * of the ring buffer can be configured using the keymap configuration + * value `WPM_SAMPLE_PERIODS`. * - * Whenever our WPM drops to absolute zero due to no typing occurring within - * any contiguous three seconds, we reset and start measuring fresh, - * which lets our WPM immediately reach the correct value even before a full - * three second sampling buffer has been filled. */ #define MAX_PERIODS (WPM_SAMPLE_PERIODS) #define PERIOD_DURATION (1000 * WPM_SAMPLE_SECONDS / MAX_PERIODS) -#define LATENCY (100) -static int8_t period_presses[MAX_PERIODS] = {0}; + +static int16_t period_presses[MAX_PERIODS] = {0}; static uint8_t current_period = 0; static uint8_t periods = 1; #if !defined(WPM_UNFILTERED) -static uint8_t prev_wpm = 0; -static uint8_t next_wpm = 0; +/* LATENCY is used as part of filtering, and controls how quickly the reported + * WPM trails behind our actual instantaneous measured WPM value, and is + * defined in milliseconds. So for LATENCY == 100, the displayed WPM is + * smoothed out over periods of 0.1 seconds. This results in a nice, + * smoothly-moving reported WPM value which nevertheless is never more than + * 0.1 seconds behind the typist's actual current WPM. + * + * LATENCY is not used if WPM_UNFILTERED is defined. + */ +# define LATENCY (100) +static uint32_t smoothing_timer = 0; +static uint8_t prev_wpm = 0; +static uint8_t next_wpm = 0; #endif void set_current_wpm(uint8_t new_wpm) { current_wpm = new_wpm; } @@ -71,7 +75,7 @@ __attribute__((weak)) bool wpm_keycode_user(uint16_t keycode) { return false; } -#ifdef WPM_ALLOW_COUNT_REGRESSION +#if defined(WPM_ALLOW_COUNT_REGRESSION) __attribute__((weak)) uint8_t wpm_regress_count(uint16_t keycode) { bool weak_modded = (keycode >= QK_LCTL && keycode < QK_LSFT) || (keycode >= QK_RCTL && keycode < QK_RSFT); @@ -95,12 +99,12 @@ __attribute__((weak)) uint8_t wpm_regress_count(uint16_t keycode) { // Outside 'raw' mode we smooth results over time. void update_wpm(uint16_t keycode) { - if (wpm_keycode(keycode)) { + if (wpm_keycode(keycode) && period_presses[current_period] < INT16_MAX) { period_presses[current_period]++; } -#ifdef WPM_ALLOW_COUNT_REGRESSION +#if defined(WPM_ALLOW_COUNT_REGRESSION) uint8_t regress = wpm_regress_count(keycode); - if (regress) { + if (regress && period_presses[current_period] > INT16_MIN) { period_presses[current_period]--; } #endif @@ -116,32 +120,41 @@ void decay_wpm(void) { } int32_t elapsed = timer_elapsed32(wpm_timer); uint32_t duration = (((periods)*PERIOD_DURATION) + elapsed); - uint32_t wpm_now = (60000 * presses) / (duration * WPM_ESTIMATED_WORD_SIZE); - wpm_now = (wpm_now > 240) ? 240 : wpm_now; + int32_t wpm_now = (60000 * presses) / (duration * WPM_ESTIMATED_WORD_SIZE); + + if (wpm_now < 0) // set some reasonable WPM measurement limits + wpm_now = 0; + if (wpm_now > 240) wpm_now = 240; if (elapsed > PERIOD_DURATION) { current_period = (current_period + 1) % MAX_PERIODS; period_presses[current_period] = 0; periods = (periods < MAX_PERIODS - 1) ? periods + 1 : MAX_PERIODS - 1; elapsed = 0; - /* if (wpm_timer == 0) { */ - wpm_timer = timer_read32(); - /* } else { */ - /* wpm_timer += PERIOD_DURATION; */ - /* } */ + wpm_timer = timer_read32(); } if (presses < 2) // don't guess high WPM based on a single keypress. wpm_now = 0; -#if defined WPM_LAUNCH_CONTROL +#if defined(WPM_LAUNCH_CONTROL) + /* + * If the `WPM_LAUNCH_CONTROL` option is enabled, then whenever our WPM + * drops to absolute zero due to no typing occurring within our sample + * ring buffer, we reset and start measuring fresh, which lets our WPM + * immediately reach the correct value even before a full sampling buffer + * has been filled. + */ if (presses == 0) { - current_period = 0; - periods = 0; - wpm_now = 0; + current_period = 0; + periods = 0; + wpm_now = 0; + period_presses[0] = 0; } #endif // WPM_LAUNCH_CONTROL -#ifndef WPM_UNFILTERED +#if defined(WPM_UNFILTERED) + current_wpm = wpm_now; +#else int32_t latency = timer_elapsed32(smoothing_timer); if (latency > LATENCY) { smoothing_timer = timer_read32(); @@ -150,7 +163,5 @@ void decay_wpm(void) { } current_wpm = prev_wpm + (latency * ((int)next_wpm - (int)prev_wpm) / LATENCY); -#else - current_wpm = wpm_now; #endif } diff --git a/quantum/wpm.h b/quantum/wpm.h index c8e7d26684..305d75b450 100644 --- a/quantum/wpm.h +++ b/quantum/wpm.h @@ -26,7 +26,7 @@ # define WPM_SAMPLE_SECONDS 5 #endif #ifndef WPM_SAMPLE_PERIODS -# define WPM_SAMPLE_PERIODS 50 +# define WPM_SAMPLE_PERIODS 25 #endif bool wpm_keycode(uint16_t keycode); @@ -1,3 +1,7 @@ +# This is the `develop` branch! + +See the [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) document for more information. + # Quantum Mechanical Keyboard Firmware [](https://github.com/qmk/qmk_firmware/tags) diff --git a/tests/auto_shift/test_auto_shift.cpp b/tests/auto_shift/test_auto_shift.cpp index 9c5ed9a832..a19b5dfa82 100644 --- a/tests/auto_shift/test_auto_shift.cpp +++ b/tests/auto_shift/test_auto_shift.cpp @@ -42,7 +42,6 @@ TEST_F(AutoShift, key_release_before_timeout) { /* Release regular key */ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -65,8 +64,6 @@ TEST_F(AutoShift, key_release_after_timeout) { EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/basic/test_action_layer.cpp b/tests/basic/test_action_layer.cpp index 1b12d13642..fe5c729f7c 100644 --- a/tests/basic/test_action_layer.cpp +++ b/tests/basic/test_action_layer.cpp @@ -131,14 +131,12 @@ TEST_F(ActionLayer, MomentaryLayerDoesNothing) { set_keymap({layer_key}); /* Press and release MO, nothing should happen. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -153,8 +151,7 @@ TEST_F(ActionLayer, MomentaryLayerWithKeypress) { set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); /* Press MO. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(1)); @@ -175,8 +172,7 @@ TEST_F(ActionLayer, MomentaryLayerWithKeypress) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release MO */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(0)); @@ -199,8 +195,7 @@ TEST_F(ActionLayer, ToggleLayerDoesNothing) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release TG. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(1)); @@ -223,8 +218,7 @@ TEST_F(ActionLayer, ToggleLayerUpAndDown) { EXPECT_TRUE(layer_state_is(1)); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); toggle_layer_1_on_layer_0.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(1)); @@ -237,8 +231,7 @@ TEST_F(ActionLayer, ToggleLayerUpAndDown) { EXPECT_TRUE(layer_state_is(0)); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); toggle_layer_0_on_layer_1.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(0)); @@ -254,14 +247,13 @@ TEST_F(ActionLayer, LayerTapToggleDoesNothing) { set_keymap({layer_key}); /* Press and release TT. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(1)); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(0)); @@ -279,7 +271,6 @@ TEST_F(ActionLayer, LayerTapToggleWithKeypress) { set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); /* Press TT. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); layer_key.press(); run_one_scan_loop(); @@ -298,8 +289,7 @@ TEST_F(ActionLayer, LayerTapToggleWithKeypress) { EXPECT_TRUE(layer_state_is(1)); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(0)); @@ -317,8 +307,7 @@ TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); /* Tap TT five times . */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(9); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); diff --git a/tests/basic/test_keypress.cpp b/tests/basic/test_keypress.cpp index 1c175c9d56..044fc29378 100644 --- a/tests/basic/test_keypress.cpp +++ b/tests/basic/test_keypress.cpp @@ -85,7 +85,7 @@ TEST_F(KeyPress, CorrectKeysAreReportedWhenTwoKeysArePressed) { TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { TestDriver driver; auto key_a = KeymapKey(0, 0, 0, KC_A); - auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); set_keymap({key_a, key_lsft}); @@ -110,8 +110,8 @@ TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { TEST_F(KeyPress, PressLeftShiftAndControl) { TestDriver driver; - auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); - auto key_lctrl = KeymapKey(0, 5, 0, KC_LCTRL); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); + auto key_lctrl = KeymapKey(0, 5, 0, KC_LEFT_CTRL); set_keymap({key_lctrl, key_lsft}); @@ -138,8 +138,8 @@ TEST_F(KeyPress, PressLeftShiftAndControl) { TEST_F(KeyPress, LeftAndRightShiftCanBePressedAtTheSameTime) { TestDriver driver; - auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); - auto key_rsft = KeymapKey(0, 4, 0, KC_RSFT); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); + auto key_rsft = KeymapKey(0, 4, 0, KC_RIGHT_SHIFT); set_keymap({key_rsft, key_lsft}); @@ -175,12 +175,12 @@ TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { // The underlying cause is that we use only one bit to represent the right hand // modifiers. combo_key.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL, KC_O))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL, KC_O))); keyboard_task(); combo_key.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } @@ -189,18 +189,18 @@ TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { TestDriver driver; InSequence s; auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); set_keymap({key_plus, key_eql}); key_plus.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); key_plus.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -220,13 +220,13 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { TestDriver driver; InSequence s; auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); set_keymap({key_plus, key_eql}); key_plus.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -237,14 +237,13 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { testing::Mock::VerifyAndClearExpectations(&driver); key_plus.release(); - // BUG: Should really still return KC_EQL, but this is fine too - // It's also called twice for some reason - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + // BUG: Should really still return KC_EQUAL, but this is fine too + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); key_eql.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); } @@ -253,12 +252,12 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TestDriver driver; InSequence s; auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); set_keymap({key_plus, key_eql}); key_eql.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -268,13 +267,13 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { testing::Mock::VerifyAndClearExpectations(&driver); key_plus.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); key_plus.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -284,12 +283,12 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { TestDriver driver; InSequence s; auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); set_keymap({key_plus, key_eql}); key_eql.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -309,9 +308,7 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { testing::Mock::VerifyAndClearExpectations(&driver); key_plus.release(); - // This report is not needed - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); -}
\ No newline at end of file +} diff --git a/tests/basic/test_one_shot_keys.cpp b/tests/basic/test_one_shot_keys.cpp index 98178912e4..43fc3e1ba3 100644 --- a/tests/basic/test_one_shot_keys.cpp +++ b/tests/basic/test_one_shot_keys.cpp @@ -175,22 +175,20 @@ TEST_F(OneShot, OSLWithAdditionalKeypress) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release OSL key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); osl_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(2); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(1); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.press(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); regular_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp index ab9dd1518b..00c2b33cb7 100644 --- a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp +++ b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp @@ -117,7 +117,6 @@ TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(layer_key.report_code))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.release(); @@ -125,7 +124,7 @@ TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_tap_hold_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp index 67f394653f..67706f80dc 100644 --- a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp +++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp @@ -119,7 +119,6 @@ TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key testing::Mock::VerifyAndClearExpectations(&driver); /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.release(); @@ -127,7 +126,7 @@ TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key testing::Mock::VerifyAndClearExpectations(&driver); /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_tap_hold_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp index 02416eed73..54e7daa22c 100644 --- a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp +++ b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp @@ -31,9 +31,8 @@ TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); /* Tap TT five times . */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ /* TODO: Tapping Force Hold breaks TT */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(10); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp index cb68429617..3ae7c4ccfd 100644 --- a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp +++ b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp @@ -60,7 +60,6 @@ TEST_F(TappingForceHold, tap_regular_key_while_mod_tap_key_is_held) { testing::Mock::VerifyAndClearExpectations(&driver); /* Idle for tapping term of mod tap hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); @@ -101,7 +100,6 @@ TEST_F(TappingForceHold, tap_mod_tap_key_while_mod_tap_key_is_held) { testing::Mock::VerifyAndClearExpectations(&driver); /* Idle for tapping term of first mod tap hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); diff --git a/tests/test_common/test_fixture.cpp b/tests/test_common/test_fixture.cpp index 0601b17191..91bf3e779e 100644 --- a/tests/test_common/test_fixture.cpp +++ b/tests/test_common/test_fixture.cpp @@ -48,7 +48,6 @@ void TestFixture::SetUpTestCase() { eeconfig_update_debug(debug_config.raw); TestDriver driver; - EXPECT_CALL(driver, send_keyboard_mock(_)); keyboard_init(); test_logger.info() << "TestFixture setup-up end." << std::endl; @@ -62,8 +61,6 @@ TestFixture::~TestFixture() { test_logger.info() << "TestFixture clean-up start." << std::endl; TestDriver driver; - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); - /* Reset keyboard state. */ clear_all_keys(); diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h index e1749f872d..319ff8487d 100644 --- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h +++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h @@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define _ARM_ATSAM_PROTOCOL_H_ #include "samd51j18a.h" -#include "md_bootloader.h" #include "timer.h" #include "d51_util.h" diff --git a/tmk_core/protocol/arm_atsam/md_bootloader.h b/tmk_core/protocol/arm_atsam/md_bootloader.h deleted file mode 100644 index 362b9bd52a..0000000000 --- a/tmk_core/protocol/arm_atsam/md_bootloader.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _MD_BOOTLOADER_H_ -#define _MD_BOOTLOADER_H_ - -extern uint32_t _srom; -extern uint32_t _lrom; -extern uint32_t _erom; - -#define BOOTLOADER_SERIAL_MAX_SIZE 20 // DO NOT MODIFY! - -#ifdef KEYBOARD_massdrop_ctrl -// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support -extern uint32_t _eram; -# define BOOTLOADER_MAGIC 0x3B9ACA00 -# define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4) -#endif - -#ifdef MD_BOOTLOADER - -# define MCU_HZ 48000000 -# define I2C_HZ 0 // Not used - -#endif // MD_BOOTLOADER - -#endif //_MD_BOOTLOADER_H_ diff --git a/tmk_core/protocol/arm_atsam/startup.c b/tmk_core/protocol/arm_atsam/startup.c index 7a5791ab55..ce043bad51 100644 --- a/tmk_core/protocol/arm_atsam/startup.c +++ b/tmk_core/protocol/arm_atsam/startup.c @@ -28,7 +28,6 @@ */ #include "samd51.h" -#include "md_bootloader.h" /* Initialize segments */ extern uint32_t _sfixed; @@ -496,6 +495,11 @@ __attribute__((section(".vectors"))) const DeviceVectors exception_table = { #endif }; +// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support +extern uint32_t _eram; +#define BOOTLOADER_MAGIC 0x3B9ACA00 +#define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4) + /** * \brief This is the code that gets called on processor reset. * To initialize the device, and call the main() routine. diff --git a/tmk_core/protocol/arm_atsam/usb/udc.c b/tmk_core/protocol/arm_atsam/usb/udc.c index d04e9b7b28..1f0c0d95d6 100644 --- a/tmk_core/protocol/arm_atsam/usb/udc.c +++ b/tmk_core/protocol/arm_atsam/usb/udc.c @@ -51,7 +51,8 @@ #include "udi_device_conf.h" #include "udi.h" #include "udc.h" -#include "md_bootloader.h" + +#define BOOTLOADER_SERIAL_MAX_SIZE 20 // DO NOT MODIFY! /** * \ingroup udc_group @@ -122,6 +123,8 @@ static uint8_t udc_string_product_name[] = USB_DEVICE_PRODUCT_NAME; # define USB_DEVICE_SERIAL_NAME_SIZE 0 #endif +extern uint32_t _srom; + uint8_t usb_device_serial_name_size = 0; #if defined USB_DEVICE_SERIAL_USE_BOOTLOADER_SERIAL uint8_t bootloader_serial_number[BOOTLOADER_SERIAL_MAX_SIZE + 1] = ""; diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index e3be96d93d..b9c2616058 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -69,8 +69,8 @@ extern keymap_config_t keymap_config; # include "outputselect.h" # ifdef MODULE_ADAFRUIT_BLE # include "adafruit_ble.h" -# else -# include "../serial.h" +# elif MODULE_RN42 +# include "rn42.h" # endif #endif @@ -90,46 +90,6 @@ extern keymap_config_t keymap_config; # include "joystick.h" #endif -// https://cdn.sparkfun.com/datasheets/Wireless/Bluetooth/bluetooth_cr_UG-v1.0r.pdf#G7.663734 -static inline uint16_t CONSUMER2RN42(uint16_t usage) { - switch (usage) { - case AC_HOME: - return 0x0001; - case AL_EMAIL: - return 0x0002; - case AC_SEARCH: - return 0x0004; - case AL_KEYBOARD_LAYOUT: - return 0x0008; - case AUDIO_VOL_UP: - return 0x0010; - case AUDIO_VOL_DOWN: - return 0x0020; - case AUDIO_MUTE: - return 0x0040; - case TRANSPORT_PLAY_PAUSE: - return 0x0080; - case TRANSPORT_NEXT_TRACK: - return 0x0100; - case TRANSPORT_PREV_TRACK: - return 0x0200; - case TRANSPORT_STOP: - return 0x0400; - case TRANSPORT_EJECT: - return 0x0800; - case TRANSPORT_FAST_FORWARD: - return 0x1000; - case TRANSPORT_REWIND: - return 0x2000; - case TRANSPORT_STOP_EJECT: - return 0x4000; - case AL_LOCAL_BROWSER: - return 0x8000; - default: - return 0; - } -} - uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -688,14 +648,7 @@ static void send_keyboard(report_keyboard_t *report) { # ifdef MODULE_ADAFRUIT_BLE adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys)); # elif MODULE_RN42 - serial_send(0xFD); - serial_send(0x09); - serial_send(0x01); - serial_send(report->mods); - serial_send(report->reserved); - for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { - serial_send(report->keys[i]); - } + rn42_send_keyboard(report); # endif return; } @@ -741,16 +694,8 @@ static void send_mouse(report_mouse_t *report) { # ifdef MODULE_ADAFRUIT_BLE // FIXME: mouse buttons adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons); -# else - serial_send(0xFD); - serial_send(0x00); - serial_send(0x03); - serial_send(report->buttons); - serial_send(report->x); - serial_send(report->y); - serial_send(report->v); // should try sending the wheel v here - serial_send(report->h); // should try sending the wheel h here - serial_send(0x00); +# elif MODULE_RN42 + rn42_send_mouse(report); # endif return; } @@ -821,15 +766,7 @@ static void send_consumer(uint16_t data) { # ifdef MODULE_ADAFRUIT_BLE adafruit_ble_send_consumer_key(data); # elif MODULE_RN42 - static uint16_t last_data = 0; - if (data == last_data) return; - last_data = data; - uint16_t bitmap = CONSUMER2RN42(data); - serial_send(0xFD); - serial_send(0x03); - serial_send(0x03); - serial_send(bitmap & 0xFF); - serial_send((bitmap >> 8) & 0xFF); + rn42_send_consumer(data); # endif return; } @@ -1077,7 +1014,7 @@ void protocol_pre_init(void) { sei(); #if defined(MODULE_RN42) - serial_init(); + rn42_init(); #endif /* wait for USB startup & debug output */ diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c index a43755f899..0b992ba6c5 100644 --- a/tmk_core/protocol/usb_descriptor.c +++ b/tmk_core/protocol/usb_descriptor.c @@ -450,7 +450,7 @@ const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { #endif #ifndef USB_POLLING_INTERVAL_MS -# define USB_POLLING_INTERVAL_MS 10 +# define USB_POLLING_INTERVAL_MS 1 #endif /* diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c index bd0f1c21aa..8bdcccc9c9 100644 --- a/tmk_core/protocol/vusb/vusb.c +++ b/tmk_core/protocol/vusb/vusb.c @@ -647,7 +647,6 @@ const PROGMEM uchar console_hid_report[] = { # define USB_MAX_POWER_CONSUMPTION 500 #endif -// TODO: change this to 10ms to match LUFA #ifndef USB_POLLING_INTERVAL_MS # define USB_POLLING_INTERVAL_MS 1 #endif diff --git a/users/drashna/oled/oled_stuff.c b/users/drashna/oled/oled_stuff.c index 9ee2cbfed8..8894814985 100644 --- a/users/drashna/oled/oled_stuff.c +++ b/users/drashna/oled/oled_stuff.c @@ -348,9 +348,8 @@ void render_wpm(uint8_t padding) { #endif } -#if defined(KEYBOARD_handwired_tractyl_manuform) || defined(KEYBOARD_bastardkb_charybdis) -extern kb_config_data_t kb_config; -void render_pointing_dpi_status(uint8_t padding) { +#if defined(POINTING_DEVICE_ENABLE) +void render_pointing_dpi_status(uint16_t cpi, uint8_t padding) { oled_write_P(PSTR("CPI:"), false); if (padding) { for (uint8_t n = padding - 1; n > 0; n--) { @@ -358,7 +357,7 @@ void render_pointing_dpi_status(uint8_t padding) { } } - oled_write(get_u16_str(kb_config.device_cpi, ' '), false); + oled_write(get_u16_str(cpi, ' '), false); } #endif @@ -381,8 +380,10 @@ __attribute__((weak)) void oled_driver_render_logo_left(void) { render_wpm(0); # endif oled_write_P(PSTR(" "), false); -# if defined(KEYBOARD_handwired_tractyl_manuform) || defined(KEYBOARD_bastardkb_charybdis) - render_pointing_dpi_status(1); +# if defined(KEYBOARD_handwired_tractyl_manuform) + render_pointing_dpi_status(kb_config_data.device_cpi, 1); +# elif defined(KEYBOARD_bastardkb_charybdis) + render_pointing_dpi_status(, 1); # endif oled_set_cursor(0, 4); #else diff --git a/users/drashna/oled/oled_stuff.h b/users/drashna/oled/oled_stuff.h index 8795684d6a..fd64b50874 100644 --- a/users/drashna/oled/oled_stuff.h +++ b/users/drashna/oled/oled_stuff.h @@ -33,7 +33,7 @@ void render_bootmagic_status(void); void render_user_status(void); void oled_driver_render_logo(void); void render_wpm(uint8_t padding); -void render_pointing_dpi_status(uint8_t padding); +void render_pointing_dpi_status(uint16_t cpi, uint8_t padding); void oled_driver_render_logo_left(void); void oled_driver_render_logo_right(void); diff --git a/users/vitoni/readme.adoc b/users/vitoni/readme.adoc new file mode 100644 index 0000000000..acf65793d2 --- /dev/null +++ b/users/vitoni/readme.adoc @@ -0,0 +1,16 @@ += User functions + +Functions are mostly related to changing the RGB lights depending on user interaction and when idling. + +== utils.h + +Common functions are declared in link:utils.h[]. These function are not directly RGB related but used to modify state and calculate values. + +== rgb_matrix_effects.h + +Functions in link:rgb_matrix_effects.h[] make use of common function in `utils.h` and are used to create to RGB matrix effects such as fading or breathing. + +== vitoni.h + +The functions declared in link:vitoni.h[] are used as entry points for usage of RGB effects. +One entry point is `matrix_scan` based for regular task while the other is `process_record` based for user activity tasks. diff --git a/users/vitoni/rgb_matrix_effects.c b/users/vitoni/rgb_matrix_effects.c new file mode 100644 index 0000000000..3a13e99bc7 --- /dev/null +++ b/users/vitoni/rgb_matrix_effects.c @@ -0,0 +1,236 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rgb_matrix_effects.h" + +#include <rgb_matrix.h> +#include <lib/lib8tion/lib8tion.h> + +#include "utils.h" + +/* + Offset used to start at the right point in th curve to avoid big jumps in brightness + 0 => 0% (signed) => 50% (unsigned) + 64 => 100% (signed) => 100% (unsigned) + 128 => 0% (signed) => 50% (unsigned) + 192 => -100% (signed) => 0% (unsigned) +*/ +enum PHASE { + PHASE_ZERO_RAISING + ,PHASE_HIGH + ,PHASE_ZERO_FALLING + ,PHASE_LOW +}; + +/** + * @brief Calculates the offset so that a specific time is aligned to a specific point in the sine curve. + * @param[in] time The time for which the offset shopuld be calculated. + * @param[in] phase Phase which should be reached with the offset + * @see PHASE + */ +uint8_t offset_for_time(const uint8_t time, const uint8_t phase) { + switch (phase) { + case PHASE_ZERO_RAISING: + return 0 - time; + case PHASE_HIGH: + return 64 - time; + case PHASE_ZERO_FALLING: + return 128 - time; + case PHASE_LOW: + return 192 - time; + default: + return 0; + } +} + +/** + * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects. + * @return scaled down timer + * @see rgb_time_2_scale_w_factor() + */ +uint8_t rgb_time_2_scale(void) { + static const uint8_t factor = 1; + return rgb_time_2_scale_w_factor(factor); +} + +/* + * Used to slow down RGB speed. + */ +static const uint8_t rgb_speed_divisor = 8; + +/** + * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects. + * @details Usually these calculations aredone internally by some RGB effects. + This method exposed to scaling so that all effects to have same timebase. If `rgb_matrix_config.speed` all effects are affected the same. + * @param[in] factor The factor can be used to speed up some operations in relation to others. + * @return scaled down timer taking into account the given factor + * @see g_rgb_timer + * @see rgb_matrix_config.speed + */ +uint8_t rgb_time_2_scale_w_factor(const uint8_t rgb_speed_factor) { + const uint8_t scaled_time = scale16by8(g_rgb_timer, rgb_matrix_config.speed * rgb_speed_factor / rgb_speed_divisor); + + return scaled_time; +} + +/** + * @brief Inverse function to calculate time required to execute `timer` steps. + * @details This method allows calculation of the time needed to execute N `timer`steps. + Usefull when using a scaled down time but requiring the time needed to perform these steps. + * @param[in] scaled_time scaled down timer to inverse to time + * @return time corresponding to scaled down time + * @see rgb_time_2_scale() + */ +uint16_t scale_2_rgb_time(const uint8_t scaled_time) { + const uint16_t time = scaled_time * rgb_speed_divisor * UINT8_MAX / rgb_matrix_config.speed; + + return time; +} + +bool fade_in_ranged(const uint8_t time, const uint8_t range_min, const uint8_t range_max) { + static const uint8_t max_delta = 1; + return scaled_sin_up(time, range_min, range_max, max_delta, &(rgb_matrix_config.hsv.v)); +} + +bool fade_out_ranged(const uint8_t time, const uint8_t range_min, const uint8_t range_max) { + static const uint8_t max_delta = 1; + return scaled_sin_down(time, range_min, range_max, max_delta, &(rgb_matrix_config.hsv.v)); +} + +/** + * @brief Convenience method to eventually skip the value part when setting HSV. + * @details When setting HSV this includes the value/brightness. + As changing brightness might interfer with fading or breathing effects, + this method can skip the value part of HSV (depending on the preprocessor flag: RGB_FADE_IN). + * @param[in] hue Hue + * @param[in] sat Saturation + * @param[in] hue Value (brightness) + * @see rgb_matrix_sethsv_noeeprom() + */ +void rgb_matrix_sethsv_noeeprom_user(const uint16_t hue, const uint8_t sat, const uint8_t val) { +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) + rgb_matrix_config.hsv.h = hue; + rgb_matrix_config.hsv.s = sat; + // omitting setting the value to avoid interfering with effects +// rgb_matrix_config.hsv.v = val; +#else + rgb_matrix_sethsv_noeeprom(hue, sat, val); +#endif +} + +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) +/** + * @brief Calculates the time offset required by fade in. + * @details Using an arbitrary timer any point on the sine curve might be pointed to. + * The offest is calculated so that + * a) the point is at the lowest point in the curve and the curve is raising + * b) the point is near the current brightness (eg. fade in might be called while fading out and the lowest value has not yet been reached). + * @param[in] time Current time usually represented by (usually scaled) timer + * @return Offset required so that time matches the current brightness + */ +uint8_t calc_fade_in_offset(const uint8_t time) { + static const uint8_t max_steps = UINT8_MAX/2; + static const uint8_t range_min = 0; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + // start at the right point in the sine curve + uint8_t time_offset = offset_for_time(time, PHASE_LOW); + + // find the right offset to match the current brightness + for (int i = 1; i < max_steps; i++) { + const uint8_t value = scaled_sin(time + time_offset + 1, range_min, range_max); + if (in_range(value, range_min, range_max) && value < rgb_matrix_config.hsv.v) { + time_offset++; + } else { + break; + } + } + + return time_offset; +} + +/** + * @brief Increases value/brightness until reaching RGB_MATRIX_MAXIMUM_BRIGHTNESS based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if RGB_MATRIX_MAXIMUM_BRIGHTNESS has been reached, `false` otherwise. + */ +bool fade_in(const uint8_t time) { + static const uint8_t range_min = 0; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + return fade_in_ranged(time, range_min, range_max); +} +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) +/** + * @brief Calculates the time offset required by fade out. + * @details Using an arbitrary timer any point on the Sinus curve might be pointed to. + * The offest is calculated so that + * a) the point is at the highest point in the curve and the curve is failing + * b) the point is near the current brightness (eg. fade out might be called while on breath effect). + * @param[in] time Current time usually represented by a(usually scaled) timer + * @return Offset required so that time matches the current brightness + */ +uint8_t calc_fade_out_offset(const uint8_t time) { + static const uint8_t range_min = 0; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + // start at the right point in the sin() curve + uint8_t time_offset = offset_for_time(time, PHASE_HIGH); + + // find the right offset to match the current brightness + for (int i = 1; i < 127; i++) { + const uint8_t value = scaled_sin(time + time_offset + 1, range_min, range_max); + if (in_range(value, range_min, range_max) && rgb_matrix_config.hsv.v < value) { + time_offset++; + } else { + break; + } + } + + return time_offset; +} +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) +/** + * @brief Decreases value/brightness until reaching 0 based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if 0 has been reached, `false` otherwise. + */ +bool fade_out(const uint8_t time) { + static const uint8_t range_min = 0; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + return fade_out_ranged(time, range_min, range_max); +} +#endif + +#if defined(RGB_IDLE_TIMEOUT) +/** + * @brief Decreases value/brightness until reaching `RGB_IDLE_MINIMUM_BRIGHTNESS` based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if `RGB_IDLE_MINIMUM_BRIGHTNESS` has been reached, `false` otherwise. + */ +bool idle_fade_out(const uint8_t time) { + static const uint8_t range_min = RGB_IDLE_MINIMUM_BRIGHTNESS; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + return fade_out_ranged(time, range_min, range_max); +} + +#if defined(RGB_IDLE_BREATHE) +/** + * @brief Changes value/brightness to create a breathing effect based on given timer. + * @details Brightness will breathe in the range starting from `RGB_IDLE_MINIMUM_BRIGHTNESS` to `RGB_IDLE_MAXIMUM_BRIGHTNESS`. + * @param[in] time A (usually scaled) timer + */ +void idle_breathe(const uint8_t time) { + static const uint8_t range_min = RGB_IDLE_MINIMUM_BRIGHTNESS; + static const uint8_t range_max = RGB_IDLE_MAXIMUM_BRIGHTNESS; + + rgb_matrix_config.hsv.v = scaled_sin(time, range_min, range_max); +} +#endif // RGB_IDLE_BREATHE +#endif // RGB_IDLE_TIMEOUT diff --git a/users/vitoni/rgb_matrix_effects.h b/users/vitoni/rgb_matrix_effects.h new file mode 100644 index 0000000000..ed74500b18 --- /dev/null +++ b/users/vitoni/rgb_matrix_effects.h @@ -0,0 +1,174 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +/** + * States reflecting the state of the keyboard. + * Dependeing on these states various effects can set for the RGB matrix. + */ +enum states { + REGULAR //!< when in regular use +#if defined(RGB_IDLE_TIMEOUT) + ,IDLE_FADE_OUT //!< when started idling + ,IDLE //!< when idling +#endif +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) + ,FADE_IN //!< when starting initially or before going back to REGULAR +#endif +#if defined(RGB_DISABLE_WITH_FADE_OUT) + ,FADE_OUT //!< before supending +#endif + ,SUSPENDED //!< expecting to be suspended by RGB_DISABLE_TIMEOUT any time +}; + +/** + * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects. + * @details Usually these calculations aredone internally by some RGB effects. + This method exposed to scaling so that all effects to have same timebase. If `rgb_matrix_config.speed` all effects are affected the same. + * @param[in] factor The factor can be used to speed up some operations in relation to others. + * @return scaled down timer taking into account the given factor + * @see g_rgb_timer + * @see rgb_matrix_config.speed + */ +uint8_t rgb_time_2_scale_w_factor(const uint8_t factor); + +/** + * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects. + * @return scaled down timer + * @see rgb_time_2_scale_w_factor() + */ +uint8_t rgb_time_2_scale(void); + +/** + * @brief Inverse function to calculate time required to execute `timer` steps. + * @details This method allows calculation of the time needed to execute N `timer`steps. + Usefull when using a scaled down time but requiring the time needed to perform these steps. + * @param[in] scaled_time scaled down timer to inverse to time + * @return time corresponding to scaled down time + * @see rgb_time_2_scale() + */ +uint16_t scale_2_rgb_time(const uint8_t scaled_time); + +/** + * @brief Convenience method to eventually skip the value part when setting HSV. + * @details When setting HSV this includes the value/brightness. + As changing brightness might interfer with fading or breathing effects, + this method can skip the value part of HSV (depending on the preprocessor flag: RGB_FADE_IN). + * @param[in] hue Hue + * @param[in] sat Saturation + * @param[in] hue Value (brightness) + * @see rgb_matrix_sethsv_noeeprom() + */ +void rgb_matrix_sethsv_noeeprom_user(const uint16_t hue, const uint8_t sat, const uint8_t val); + +#if defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) +# if defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) +# if (RGB_MATRIX_MAXIMUM_BRIGHTNESS) < 1 +# error "RGB_MATRIX_MAXIMUM_BRIGHTNESS must not be less than ONE" +# endif +# if UINT8_MAX < (RGB_MATRIX_MAXIMUM_BRIGHTNESS) +# error "RGB_MATRIX_MAXIMUM_BRIGHTNESS must not be larger than UINT8_MAX" +# endif +# else +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 +# endif +#endif + +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) +/** + * @brief Calculates the time offset required by fade in. + * @details Using an arbitrary timer any point on the sine curve might be pointed to. + * The offset is calculated so that + * a) the point is at the lowest point in the curve and the curve is raising + * b) the point is near the current brightness (eg. fade in might be called while fading out and the lowest value has not yet been reached). + * @param[in] time Current time usually represented by a(usually scaled) timer + * @return Offset required so that time matches the current brightness + */ +uint8_t calc_fade_in_offset(const uint8_t time); + +/** + * @brief Increases value/brightness until reaching RGB_MATRIX_MAXIMUM_BRIGHTNESS based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if RGB_MATRIX_MAXIMUM_BRIGHTNESS has been reached, `false` otherwise. + */ +bool fade_in(const uint8_t time); +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) +# if !defined(RGB_DISABLE_TIMEOUT) +# warning "RGB_DISABLE_WITH_FADE_OUT expects RGB_DISABLE_TIMEOUT to be defined" +# endif +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) +/** + * @brief Calculates the time offset required by fade out. + * @details Using an arbitrary timer any point on the Sinus curve might be pointed to. + * The offest is calculated so that + * a) the point is at the highest point in the curve and the curve is failing + * b) the point is near the current brightness (eg. fade out might be called while on breath effect). + * @param[in] time Current time usually represented by a(usually scaled) timer + * @return Offset required so that time matches the current brightness + */ +uint8_t calc_fade_out_offset(const uint8_t time); +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) +/** + * @brief Decreases value/brightness until reaching 0 based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if 0 has been reached, `false` otherwise. + */ +bool fade_out(const uint8_t time); +#endif + +#if defined(RGB_IDLE_TIMEOUT) +# if RGB_IDLE_TIMEOUT < 0 +# error "RGB_IDLE_TIMEOUT must not be less than ZERO" +# endif +# if !defined(RGB_IDLE_MINIMUM_BRIGHTNESS) + // minimum brightness when idling +# define RGB_IDLE_MINIMUM_BRIGHTNESS (RGB_MATRIX_MAXIMUM_BRIGHTNESS/5) +# endif +# if RGB_IDLE_MINIMUM_BRIGHTNESS < 0 +# error "RGB_IDLE_MINIMUM_BRIGHTNESS must not be less than ZERO" +# endif // RGB_IDLE_MINIMUM_BRIGHTNESS < 0 +# if RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS +# error "RGB_IDLE_MINIMUM_BRIGHTNESS must be less than RGB_MATRIX_MAXIMUM_BRIGHTNESS" +# endif // RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS + +/** + * @brief Decreases value/brightness until reaching `RGB_IDLE_MINIMUM_BRIGHTNESS` based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if `RGB_IDLE_MINIMUM_BRIGHTNESS` has been reached, `false` otherwise. + */ +bool idle_fade_out(const uint8_t time); + +#if defined(RGB_IDLE_BREATHE) +# if !defined(RGB_IDLE_MAXIMUM_BRIGHTNESS) + // maximum brightness when idling +# define RGB_IDLE_MAXIMUM_BRIGHTNESS (RGB_MATRIX_MAXIMUM_BRIGHTNESS*3/5) +# endif +# if !(0 <= RGB_IDLE_MAXIMUM_BRIGHTNESS) +# error "RGB_IDLE_MINIMUM_BRIGHTNESS must not be less than ZERO, was: " RGB_IDLE_MAXIMUM_BRIGHTNESS +# endif // RGB_IDLE_MAXIMUM_BRIGHTNESS < 0 +# if !(RGB_IDLE_MINIMUM_BRIGHTNESS < RGB_IDLE_MAXIMUM_BRIGHTNESS) +# error "RGB_IDLE_MINIMUM_BRIGHTNESS must be less than RGB_IDLE_MAXIMUM_BRIGHTNESS" +# endif // RGB_IDLE_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS +# if !(RGB_IDLE_MAXIMUM_BRIGHTNESS <= RGB_MATRIX_MAXIMUM_BRIGHTNESS) +# error "RGB_IDLE_MAXIMUM_BRIGHTNESS must be less than or equal to RGB_MATRIX_MAXIMUM_BRIGHTNESS" +# endif // RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MAXIMUM_BRIGHTNESS + +/** + * @brief Changes value/brightness to create a breathing effect based on given timer. + * @details Brightness will breathe in the range starting from `RGB_IDLE_MINIMUM_BRIGHTNESS` to `RGB_IDLE_MAXIMUM_BRIGHTNESS`. + * @param[in] time A (usually scaled) timer + */ +void idle_breathe(const uint8_t time); +#endif // RGB_IDLE_BREATHE + +#endif // RGB_IDLE_TIMEOUT diff --git a/users/vitoni/rules.mk b/users/vitoni/rules.mk new file mode 100644 index 0000000000..2f3b0d15e5 --- /dev/null +++ b/users/vitoni/rules.mk @@ -0,0 +1,4 @@ +SRC += \ + vitoni.c \ + utils.c \ + rgb_matrix_effects.c diff --git a/users/vitoni/utils.c b/users/vitoni/utils.c new file mode 100644 index 0000000000..fb011570e4 --- /dev/null +++ b/users/vitoni/utils.c @@ -0,0 +1,129 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "utils.h" + +#include <lib/lib8tion/lib8tion.h> + +/** +* @brief Changes `*value` to `new_value`. +* @param[in,out] value Pointer to variable to be changed. +* @param[in] new_value Value to be changed. +* @param[in,out] changed Flag indicating `*value` and `new_value` were different. +*/ +void update_value(uint8_t *value, const uint8_t new_value, bool *changed) { + if (new_value != (*value)) { + (*changed) = true; + (*value) = new_value; + } +} + +/** +* @brief Checks whether a value is in the given range. +* @param[in] value Value to be checked. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @return `true` if (range_min <= value <= range_max), `false` otherwise +*/ +bool in_range(const uint8_t value, const uint8_t range_min, const uint8_t range_max) { + return range_min <= value && value <= range_max; +} + +/** +* @brief Calculates the sine value based on sin8() and scales it to the given range (unsigned). +* +* Table of values for unscaled sin8() eg. a theta of 0 results to 128 and a theta of 255 (240+15) results to 125. + 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + +---------------------------------------------------------------- + 0: 128 131 134 137 140 143 146 149 152 155 158 161 164 167 170 173 + 16: 177 179 182 184 187 189 192 194 197 200 202 205 207 210 212 215 + 32: 218 219 221 223 224 226 228 229 231 233 234 236 238 239 241 243 + 48: 245 245 246 246 247 248 248 249 250 250 251 251 252 253 253 254 + 64: 255 254 253 253 252 251 251 250 250 249 248 248 247 246 246 245 + 80: 245 243 241 239 238 236 234 233 231 229 228 226 224 223 221 219 + 96: 218 215 212 210 207 205 202 200 197 194 192 189 187 184 182 179 + 112: 177 173 170 167 164 161 158 155 152 149 146 143 140 137 134 131 + 128: 128 125 122 119 116 113 110 107 104 101 98 95 92 89 86 83 + 144: 79 77 74 72 69 67 64 62 59 56 54 51 49 46 44 41 + 160: 38 37 35 33 32 30 28 27 25 23 22 20 18 17 15 13 + 176: 11 11 10 10 9 8 8 7 6 6 5 5 4 3 3 2 + 192: 1 2 3 3 4 5 5 6 6 7 8 8 9 10 10 11 + 208: 11 13 15 17 18 20 22 23 25 27 28 30 32 33 35 37 + 224: 38 41 44 46 49 51 54 56 59 62 64 67 69 72 74 77 + 240: 79 83 86 89 92 95 98 101 104 107 110 113 116 119 122 125 +* +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @return Calculated sine value mapped to the given range. +*/ +uint8_t scaled_sin(const uint8_t theta, const uint8_t range_min, const uint8_t range_max) { + const uint8_t range = range_max - range_min; + return scale8(sin8(theta), range) + range_min; +} + +/** +* @brief Increases the given value until reaching range_max. +* The increments occur following an upwards sine wave (scaled from range_min to range_max). +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @param[in] max_delta Maximum delta between value and range_max (due to values being integers and eventually not fully matching). +* @param[in,out] value Reference of variable to be increased +* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise +* @see scaled_sin() +*/ +bool scaled_sin_up(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value) { + // ensure upper range bound + if (range_max <= (*value)) { + (*value) = range_max; + return true; + } + + const uint8_t new_value = scaled_sin(theta, range_min, range_max); + if (in_range(new_value, range_min, range_max) && (*value) < new_value) { + (*value) = new_value; + + return range_max == (*value); + } + + const uint8_t delta = range_max - (*value); + if (delta <= max_delta) { + (*value) = range_max; + } + + return delta <= max_delta; +} + +/** +* @brief Decreases the given value until reaching range_min. +* The decrements occur following an downwards sinus wave (scaled from range_min to range_max). +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sinus calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @param[in] max_delta Maximum delta between value and range_min (due to values being integers and eventually not fully matching). +* @param[in,out] value Reference of variable to be decreased +* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise +* @see scaled_sin() +*/ +bool scaled_sin_down(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value) { + // ensure lower range bound + if ((*value) <= range_min) { + (*value) = range_min; + return true; + } + + const uint8_t new_value = scaled_sin(theta, range_min, range_max); + if (in_range(new_value, range_min, range_max) && new_value < (*value)) { + (*value) = new_value; + + return range_min == (*value); + } + + const uint8_t delta = (*value) - range_min; + if (delta <= max_delta) { + (*value) = range_min; + } + + return delta <= max_delta; +} diff --git a/users/vitoni/utils.h b/users/vitoni/utils.h new file mode 100644 index 0000000000..987b612d58 --- /dev/null +++ b/users/vitoni/utils.h @@ -0,0 +1,80 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +/** +* @brief Changes `*value` to `new_value`. +* @param[in,out] value Pointer to variable to be changed. +* @param[in] new_value Value to be changed. +* @param[in,out] changed Flag indicating `*value` and `new_value` were different. +*/ +void update_value(uint8_t *value, const uint8_t new_value, bool *changed); + +/** +* @brief Checks whether a value is in the given range. +* @param[in] value Value to be checked. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @return `true` if (range_min <= value <= range_max), `false` otherwise +*/ +bool in_range(const uint8_t value, const uint8_t range_min, const uint8_t range_max); + +/** +* @brief Calculates the sine value based on sin8() and scales it to the given range (unsigned). +* +* Table of values for unscaled sin8() eg. a theta of 0 results to 128 and a theta of 255 (240+15) results to 125. + 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + +---------------------------------------------------------------- + 0: 128 131 134 137 140 143 146 149 152 155 158 161 164 167 170 173 + 16: 177 179 182 184 187 189 192 194 197 200 202 205 207 210 212 215 + 32: 218 219 221 223 224 226 228 229 231 233 234 236 238 239 241 243 + 48: 245 245 246 246 247 248 248 249 250 250 251 251 252 253 253 254 + 64: 255 254 253 253 252 251 251 250 250 249 248 248 247 246 246 245 + 80: 245 243 241 239 238 236 234 233 231 229 228 226 224 223 221 219 + 96: 218 215 212 210 207 205 202 200 197 194 192 189 187 184 182 179 + 112: 177 173 170 167 164 161 158 155 152 149 146 143 140 137 134 131 + 128: 128 125 122 119 116 113 110 107 104 101 98 95 92 89 86 83 + 144: 79 77 74 72 69 67 64 62 59 56 54 51 49 46 44 41 + 160: 38 37 35 33 32 30 28 27 25 23 22 20 18 17 15 13 + 176: 11 11 10 10 9 8 8 7 6 6 5 5 4 3 3 2 + 192: 1 2 3 3 4 5 5 6 6 7 8 8 9 10 10 11 + 208: 11 13 15 17 18 20 22 23 25 27 28 30 32 33 35 37 + 224: 38 41 44 46 49 51 54 56 59 62 64 67 69 72 74 77 + 240: 79 83 86 89 92 95 98 101 104 107 110 113 116 119 122 125 +* +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @return Calculated sine value mapped to the given range. +*/ +uint8_t scaled_sin(const uint8_t theta, const uint8_t range_min, const uint8_t range_max); + +/** +* @brief Increases the given value until reaching range_max. +* The increments occur following an upwards sine wave (scaled from range_min to range_max). +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @param[in] max_delta Maximum delta between value and range_max (due to values being integers and eventually not fully matching). +* @param[in,out] value Reference of variable to be increased +* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise +* @see scaled_sin() +*/ +bool scaled_sin_up(const uint8_t thea, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value); + +/** +* @brief Decreases the given value until reaching range_min. +* The decrements occur following an downwards sinus wave (scaled from range_min to range_max). +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sinus calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @param[in] max_delta Maximum delta between value and range_min (due to values being integers and eventually not fully matching). +* @param[in,out] value Reference of variable to be decreased +* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise +* @see scaled_sin() +*/ +bool scaled_sin_down(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value); diff --git a/users/vitoni/vitoni.c b/users/vitoni/vitoni.c new file mode 100644 index 0000000000..2a0ff5c46f --- /dev/null +++ b/users/vitoni/vitoni.c @@ -0,0 +1,131 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "vitoni.h" + +#include <rgb_matrix.h> +#include <lib/lib8tion/lib8tion.h> + +#include "rgb_matrix_effects.h" +#include "utils.h" + +#if defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) +static uint8_t state; + +// flag used to indicate that offset calculation is needed to adjust the timer, +// so that it matches the index used for sine calculation +static bool calc_offset; + +void matrix_scan_user_rgb(void) { +#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) + const uint8_t time = rgb_time_2_scale(); +#endif + static uint8_t time_offset; + + const uint32_t inactivity_millis = last_input_activity_elapsed(); + +#if defined(RGB_IDLE_TIMEOUT) + if (IDLE != state && RGB_IDLE_TIMEOUT <= inactivity_millis) { + update_value(&state, IDLE_FADE_OUT, &calc_offset); + } +#endif +#if defined(RGB_DISABLE_WITH_FADE_OUT) + const uint32_t fade_out_duration = scale_2_rgb_time(128); + const uint32_t start_fade_out_after_millis = (RGB_DISABLE_TIMEOUT) > fade_out_duration + ? (RGB_DISABLE_TIMEOUT) - fade_out_duration + : 0; + + if (start_fade_out_after_millis <= inactivity_millis) { + update_value(&state, FADE_OUT, &calc_offset); + } +#elif defined(RGB_DISABLE_TIMEOUT) + // having to set brightness "manually" to black as starting point for fade in + // for the time when returning from suspended state + if (RGB_DISABLE_TIMEOUT <= inactivity_millis + 15) { + rgb_matrix_config.hsv.v = 0; + state = SUSPENDED; + } +#endif + + switch(state) { +#if defined(RGB_IDLE_TIMEOUT) + case IDLE_FADE_OUT: + if (calc_offset) { + time_offset = calc_fade_out_offset(time); + + // resetting flag for subsequent calls + calc_offset = false; + } + if (idle_fade_out(time + time_offset)) { + update_value(&state, IDLE, &calc_offset); + } + break; + case IDLE: +#if defined(RGB_IDLE_BREATHE) + if (calc_offset) { + // no need to calculate time_offset since we are aligned already due to IDLE_FADE_OUT + // resetting flag for subsequent calls + calc_offset = false; + } + idle_breathe(time + time_offset); +#endif + break; +#endif +#if defined(RGB_DISABLE_WITH_FADE_OUT) + case FADE_OUT: + if (calc_offset) { + time_offset = calc_fade_out_offset(time); + + // resetting flag for subsequent calls + calc_offset = false; + } + if (fade_out(time + time_offset)) { + update_value(&state, SUSPENDED, &calc_offset); + } + break; +#endif +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) + case FADE_IN: + { + // since we want to be active, fade in should be faster than e.g. fading out + const uint8_t fade_in_time = rgb_time_2_scale_w_factor(4); + if (calc_offset) { + time_offset = calc_fade_in_offset(fade_in_time); + + // resetting flag for subsequent calls + calc_offset = false; + } + if (fade_in(fade_in_time + time_offset)) { + update_value(&state, REGULAR, &calc_offset); + } + } + break; +#endif + default: + break; + } +} + +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) +bool process_record_user_rgb(const uint16_t keycode, const keyrecord_t *record) { + // if we are in a non regular state we might have faded out (eventually partially) + // so we restore brightness (to max as we don't keep track of manually changed brightness) + // if (REGULAR != state && FADE_IN != state) { + if (FADE_IN != state && REGULAR != state) { + update_value(&state, FADE_IN, &calc_offset); + } + + return true; // Process all other keycodes normally +} + +void suspend_wakeup_init_user(void) { + if (FADE_IN != state) { + // setting brightness to black as starting point for fade in + rgb_matrix_config.hsv.v = 0; + + update_value(&state, FADE_IN, &calc_offset); + } +} +#endif // defined(RGB_FADE_IN) + +#endif // defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT) diff --git a/users/vitoni/vitoni.h b/users/vitoni/vitoni.h new file mode 100644 index 0000000000..1f26037135 --- /dev/null +++ b/users/vitoni/vitoni.h @@ -0,0 +1,30 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +#include <quantum/action.h> + +#include "rgb_matrix_effects.h" + +/** + * @brief Executes periodic tasks, eg. fading or checking for upcoming supend. + * @details Function declaration as weak as the implementation might "disappear" depending on the RGB settings used. + * The weak declaration avoids having to change `keymap.c`. + */ +__attribute__((weak)) +void matrix_scan_user_rgb(void); + +/** + * @brief Executes tasks based on user activity, eg. fading in. + * @details Function declaration as weak as the implementation might "disappear" depending on the RGB settings used. + * The weak declaration avoids having to change `keymap.c`. + * @param[in] keycode + * @param[in] record + * @return `false` if further processing should be stopped, `true` otherwise + */ +__attribute__((weak)) +bool process_record_user_rgb(const uint16_t keycode, const keyrecord_t *record); diff --git a/util/update_chibios_mirror.sh b/util/update_chibios_mirror.sh index 0bf648ebfd..e6666c55c9 100755 --- a/util/update_chibios_mirror.sh +++ b/util/update_chibios_mirror.sh @@ -4,13 +4,13 @@ # Configuration # The ChibiOS branches to mirror -chibios_branches="trunk stable_20.3.x stable_21.6.x" +chibios_branches="trunk stable_20.3.x stable_21.11.x" # The ChibiOS tags to mirror -chibios_tags="ver20.3.1 ver20.3.2 ver20.3.3 ver20.3.4 ver21.6.0" +chibios_tags="ver20.3.1 ver20.3.2 ver20.3.3 ver20.3.4 ver21.11.1" # The ChibiOS-Contrib branches to mirror -contrib_branches="chibios-20.3.x chibios-21.6.x" +contrib_branches="chibios-20.3.x chibios-21.11.x" ################################ # Actions @@ -88,5 +88,5 @@ echo "Updating ChibiOS-Contrib branches..." for branch in $contrib_branches ; do echo "Creating branch 'mirror/$branch' from 'upstream/$branch'..." git branch -f mirror/$branch upstream/$branch \ - && git push qmk mirror/$branch + && git push qmk mirror/$branch || true # Allow for nonexistent ChibiOS-Contrib branches -- they'll turn up eventually. done |