summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--docs/feature_haptic_feedback.md11
-rw-r--r--drivers/haptic/solenoid.c16
-rw-r--r--drivers/haptic/solenoid.h8
-rw-r--r--quantum/haptic.c51
-rw-r--r--quantum/haptic.h27
-rw-r--r--quantum/process_keycode/process_haptic.c3
-rw-r--r--tmk_core/protocol/usb_device_state.c10
7 files changed, 115 insertions, 11 deletions
diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md
index 4054c5d9b7..159296a297 100644
--- a/docs/feature_haptic_feedback.md
+++ b/docs/feature_haptic_feedback.md
@@ -11,6 +11,16 @@ HAPTIC_DRIVER += DRV2605L
HAPTIC_DRIVER += SOLENOID
```
+The following `config.h` settings are available for all types of haptic feedback:
+
+| Settings | Default | Description |
+|--------------------------------------|---------------|---------------------------------------------------------------------------------------------------------------|
+|`HAPTIC_ENABLE_PIN` | *Not defined* |Configures a pin to enable a boost converter for some haptic solution, often used with solenoid drivers. |
+|`HAPTIC_ENABLE_PIN_ACTIVE_LOW` | *Not defined* |If defined then the haptic enable pin is active-low. |
+|`HAPTIC_ENABLE_STATUS_LED` | *Not defined* |Configures a pin to reflect the current enabled/disabled status of haptic feedback. |
+|`HAPTIC_ENABLE_STATUS_LED_ACTIVE_LOW` | *Not defined* |If defined then the haptic status led will be active-low. |
+|`HAPTIC_OFF_IN_LOW_POWER` | `0` |If set to `1`, haptic feedback is disabled before the device is configured, and while the device is suspended. |
+
## Known Supported Hardware
| Name | Description |
@@ -48,6 +58,7 @@ First you will need a build a circuit to drive the solenoid through a mosfet as
| Settings | Default | Description |
|----------------------------|----------------------|-------------------------------------------------------|
|`SOLENOID_PIN` | *Not defined* |Configures the pin that the Solenoid is connected to. |
+|`SOLENOID_PIN_ACTIVE_LOW` | *Not defined* |If defined then the solenoid trigger pin is active low.|
|`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the solenoid. |
|`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. |
|`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. |
diff --git a/drivers/haptic/solenoid.c b/drivers/haptic/solenoid.c
index 25cf344655..7a09940f78 100644
--- a/drivers/haptic/solenoid.c
+++ b/drivers/haptic/solenoid.c
@@ -19,6 +19,7 @@
#include "solenoid.h"
#include "haptic.h"
#include "gpio.h"
+#include "usb_device_state.h"
bool solenoid_on = false;
bool solenoid_buzzing = false;
@@ -36,7 +37,7 @@ void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); }
void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; }
void solenoid_stop(void) {
- writePinLow(SOLENOID_PIN);
+ SOLENOID_PIN_WRITE_INACTIVE();
solenoid_on = false;
solenoid_buzzing = false;
}
@@ -48,7 +49,7 @@ void solenoid_fire(void) {
solenoid_on = true;
solenoid_buzzing = true;
solenoid_start = timer_read();
- writePinHigh(SOLENOID_PIN);
+ SOLENOID_PIN_WRITE_ACTIVE();
}
void solenoid_check(void) {
@@ -69,20 +70,23 @@ void solenoid_check(void) {
if ((elapsed % (SOLENOID_BUZZ_ACTUATED + SOLENOID_BUZZ_NONACTUATED)) < SOLENOID_BUZZ_ACTUATED) {
if (!solenoid_buzzing) {
solenoid_buzzing = true;
- writePinHigh(SOLENOID_PIN);
+ SOLENOID_PIN_WRITE_ACTIVE();
}
} else {
if (solenoid_buzzing) {
solenoid_buzzing = false;
- writePinLow(SOLENOID_PIN);
+ SOLENOID_PIN_WRITE_INACTIVE();
}
}
}
}
void solenoid_setup(void) {
+ SOLENOID_PIN_WRITE_INACTIVE();
setPinOutput(SOLENOID_PIN);
- solenoid_fire();
+ if ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED)) {
+ solenoid_fire();
+ }
}
-void solenoid_shutdown(void) { writePinLow(SOLENOID_PIN); }
+void solenoid_shutdown(void) { SOLENOID_PIN_WRITE_INACTIVE(); }
diff --git a/drivers/haptic/solenoid.h b/drivers/haptic/solenoid.h
index f2a3bc4c30..653148154f 100644
--- a/drivers/haptic/solenoid.h
+++ b/drivers/haptic/solenoid.h
@@ -49,6 +49,14 @@
# error SOLENOID_PIN not defined
#endif
+#ifdef SOLENOID_PIN_ACTIVE_LOW
+# define SOLENOID_PIN_WRITE_ACTIVE() writePinLow(SOLENOID_PIN)
+# define SOLENOID_PIN_WRITE_INACTIVE() writePinHigh(SOLENOID_PIN)
+#else
+# define SOLENOID_PIN_WRITE_ACTIVE() writePinHigh(SOLENOID_PIN)
+# define SOLENOID_PIN_WRITE_INACTIVE() writePinLow(SOLENOID_PIN)
+#endif
+
void solenoid_buzz_on(void);
void solenoid_buzz_off(void);
void solenoid_set_buzz(int buzz);
diff --git a/quantum/haptic.c b/quantum/haptic.c
index 65abcc15fa..f915acf946 100644
--- a/quantum/haptic.c
+++ b/quantum/haptic.c
@@ -17,6 +17,8 @@
#include "haptic.h"
#include "eeconfig.h"
#include "debug.h"
+#include "usb_device_state.h"
+#include "gpio.h"
#ifdef DRV2605L
# include "DRV2605L.h"
#endif
@@ -26,6 +28,29 @@
haptic_config_t haptic_config;
+static void update_haptic_enable_gpios(void) {
+ if (haptic_config.enable && ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED))) {
+#if defined(HAPTIC_ENABLE_PIN)
+ HAPTIC_ENABLE_PIN_WRITE_ACTIVE();
+#endif
+#if defined(HAPTIC_ENABLE_STATUS_LED)
+ HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE();
+#endif
+ } else {
+#if defined(HAPTIC_ENABLE_PIN)
+ HAPTIC_ENABLE_PIN_WRITE_INACTIVE();
+#endif
+#if defined(HAPTIC_ENABLE_STATUS_LED)
+ HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE();
+#endif
+ }
+}
+
+static void set_haptic_config_enable(bool enabled) {
+ haptic_config.enable = enabled;
+ update_haptic_enable_gpios();
+}
+
void haptic_init(void) {
if (!eeconfig_is_enabled()) {
eeconfig_init();
@@ -44,6 +69,10 @@ void haptic_init(void) {
// or the previous firmware didn't have solenoid enabled,
// and the current one has solenoid enabled.
haptic_reset();
+ } else {
+ // Haptic configuration has been loaded through the "raw" union item.
+ // This is to execute any side effects of the configuration.
+ set_haptic_config_enable(haptic_config.enable);
}
#ifdef SOLENOID_ENABLE
solenoid_setup();
@@ -54,6 +83,12 @@ void haptic_init(void) {
dprintf("DRV2605 driver initialized\n");
#endif
eeconfig_debug_haptic();
+#ifdef HAPTIC_ENABLE_PIN
+ setPinOutput(HAPTIC_ENABLE_PIN);
+#endif
+#ifdef HAPTIC_ENABLE_STATUS_LED
+ setPinOutput(HAPTIC_ENABLE_STATUS_LED);
+#endif
}
void haptic_task(void) {
@@ -69,13 +104,13 @@ void eeconfig_debug_haptic(void) {
}
void haptic_enable(void) {
- haptic_config.enable = 1;
+ set_haptic_config_enable(true);
xprintf("haptic_config.enable = %u\n", haptic_config.enable);
eeconfig_update_haptic(haptic_config.raw);
}
void haptic_disable(void) {
- haptic_config.enable = 0;
+ set_haptic_config_enable(false);
xprintf("haptic_config.enable = %u\n", haptic_config.enable);
eeconfig_update_haptic(haptic_config.raw);
}
@@ -157,7 +192,7 @@ void haptic_dwell_decrease(void) {
}
void haptic_reset(void) {
- haptic_config.enable = true;
+ set_haptic_config_enable(true);
uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT;
haptic_config.feedback = feedback;
#ifdef DRV2605L
@@ -293,3 +328,13 @@ void haptic_shutdown(void) {
solenoid_shutdown();
#endif
}
+
+void haptic_notify_usb_device_state_change(void) {
+ update_haptic_enable_gpios();
+#if defined(HAPTIC_ENABLE_PIN)
+ setPinOutput(HAPTIC_ENABLE_PIN);
+#endif
+#if defined(HAPTIC_ENABLE_STATUS_LED)
+ setPinOutput(HAPTIC_ENABLE_STATUS_LED);
+#endif
+}
diff --git a/quantum/haptic.h b/quantum/haptic.h
index fc7ca2f3e6..7d70a01333 100644
--- a/quantum/haptic.h
+++ b/quantum/haptic.h
@@ -75,3 +75,30 @@ void haptic_cont_decrease(void);
void haptic_play(void);
void haptic_shutdown(void);
+void haptic_notify_usb_device_state_change(void);
+
+#ifdef HAPTIC_ENABLE_PIN_ACTIVE_LOW
+# ifndef HAPTIC_ENABLE_PIN
+# error HAPTIC_ENABLE_PIN not defined
+# endif
+# define HAPTIC_ENABLE_PIN_WRITE_ACTIVE() writePinLow(HAPTIC_ENABLE_PIN)
+# define HAPTIC_ENABLE_PIN_WRITE_INACTIVE() writePinHigh(HAPTIC_ENABLE_PIN)
+#else
+# define HAPTIC_ENABLE_PIN_WRITE_ACTIVE() writePinHigh(HAPTIC_ENABLE_PIN)
+# define HAPTIC_ENABLE_PIN_WRITE_INACTIVE() writePinLow(HAPTIC_ENABLE_PIN)
+#endif
+
+#ifdef HAPTIC_ENABLE_STATUS_LED_ACTIVE_LOW
+# ifndef HAPTIC_ENABLE_STATUS_LED
+# error HAPTIC_ENABLE_STATUS_LED not defined
+# endif
+# define HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE() writePinLow(HAPTIC_ENABLE_STATUS_LED)
+# define HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE() writePinHigh(HAPTIC_ENABLE_STATUS_LED)
+#else
+# define HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE() writePinHigh(HAPTIC_ENABLE_STATUS_LED)
+# define HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE() writePinLow(HAPTIC_ENABLE_STATUS_LED)
+#endif
+
+#ifndef HAPTIC_OFF_IN_LOW_POWER
+# define HAPTIC_OFF_IN_LOW_POWER 0
+#endif
diff --git a/quantum/process_keycode/process_haptic.c b/quantum/process_keycode/process_haptic.c
index 1b9c2f24fa..466c8e5543 100644
--- a/quantum/process_keycode/process_haptic.c
+++ b/quantum/process_keycode/process_haptic.c
@@ -17,6 +17,7 @@
#include "process_haptic.h"
#include "quantum_keycodes.h"
#include "action_tapping.h"
+#include "usb_device_state.h"
__attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
@@ -131,7 +132,7 @@ bool process_haptic(uint16_t keycode, keyrecord_t *record) {
}
}
- if (haptic_get_enable()) {
+ if (haptic_get_enable() && ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED))) {
if (record->event.pressed) {
// keypress
if (haptic_get_feedback() < 2 && get_haptic_enabled_key(keycode, record)) {
diff --git a/tmk_core/protocol/usb_device_state.c b/tmk_core/protocol/usb_device_state.c
index 5ccd309ec2..84f01943be 100644
--- a/tmk_core/protocol/usb_device_state.c
+++ b/tmk_core/protocol/usb_device_state.c
@@ -16,6 +16,9 @@
*/
#include "usb_device_state.h"
+#if defined(HAPTIC_ENABLE)
+# include "haptic.h"
+#endif
enum usb_device_state usb_device_state = USB_DEVICE_STATE_NO_INIT;
@@ -23,7 +26,12 @@ __attribute__((weak)) void notify_usb_device_state_change_kb(enum usb_device_sta
__attribute__((weak)) void notify_usb_device_state_change_user(enum usb_device_state usb_device_state) {}
-static void notify_usb_device_state_change(enum usb_device_state usb_device_state) { notify_usb_device_state_change_kb(usb_device_state); }
+static void notify_usb_device_state_change(enum usb_device_state usb_device_state) {
+#if defined(HAPTIC_ENABLE) && HAPTIC_OFF_IN_LOW_POWER
+ haptic_notify_usb_device_state_change();
+#endif
+ notify_usb_device_state_change_kb(usb_device_state);
+}
void usb_device_state_set_configuration(bool isConfigured, uint8_t configurationNumber) {
usb_device_state = isConfigured ? USB_DEVICE_STATE_CONFIGURED : USB_DEVICE_STATE_INIT;