diff options
| -rw-r--r-- | common_features.mk | 7 | ||||
| -rw-r--r-- | drivers/eeprom/eeprom_driver.c | 6 | ||||
| -rw-r--r-- | drivers/eeprom/eeprom_i2c.c | 30 | ||||
| -rw-r--r-- | drivers/eeprom/eeprom_spi.c | 231 | ||||
| -rw-r--r-- | drivers/eeprom/eeprom_spi.h | 80 | ||||
| -rw-r--r-- | keyboards/handwired/onekey/keymaps/eep_rst/keymap.c | 5 |
6 files changed, 344 insertions, 15 deletions
diff --git a/common_features.mk b/common_features.mk index f98361e31a..6d5dfffa07 100644 --- a/common_features.mk +++ b/common_features.mk @@ -70,7 +70,7 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes) SRC += $(QUANTUM_DIR)/pointing_device.c endif -VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c +VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi EEPROM_DRIVER ?= vendor ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),) $(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver) @@ -85,6 +85,11 @@ else COMMON_VPATH += $(DRIVER_PATH)/eeprom QUANTUM_LIB_SRC += i2c_master.c SRC += eeprom_driver.c eeprom_i2c.c + else ifeq ($(strip $(EEPROM_DRIVER)), spi) + OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI + COMMON_VPATH += $(DRIVER_PATH)/eeprom + QUANTUM_LIB_SRC += spi_master.c + SRC += eeprom_driver.c eeprom_spi.c else ifeq ($(strip $(EEPROM_DRIVER)), transient) OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT COMMON_VPATH += $(DRIVER_PATH)/eeprom diff --git a/drivers/eeprom/eeprom_driver.c b/drivers/eeprom/eeprom_driver.c index 3835e5e9d0..6ce47faf7d 100644 --- a/drivers/eeprom/eeprom_driver.c +++ b/drivers/eeprom/eeprom_driver.c @@ -20,19 +20,19 @@ #include "eeprom_driver.h" uint8_t eeprom_read_byte(const uint8_t *addr) { - uint8_t ret; + uint8_t ret = 0; eeprom_read_block(&ret, addr, 1); return ret; } uint16_t eeprom_read_word(const uint16_t *addr) { - uint16_t ret; + uint16_t ret = 0; eeprom_read_block(&ret, addr, 2); return ret; } uint32_t eeprom_read_dword(const uint32_t *addr) { - uint32_t ret; + uint32_t ret = 0; eeprom_read_block(&ret, addr, 4); return ret; } diff --git a/drivers/eeprom/eeprom_i2c.c b/drivers/eeprom/eeprom_i2c.c index 03dbc5e516..88be2be06f 100644 --- a/drivers/eeprom/eeprom_i2c.c +++ b/drivers/eeprom/eeprom_i2c.c @@ -50,7 +50,7 @@ static inline void init_i2c_if_required(void) { } static inline void fill_target_address(uint8_t *buffer, const void *addr) { - intptr_t p = (intptr_t)addr; + uintptr_t p = (uintptr_t)addr; for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) { buffer[EXTERNAL_EEPROM_ADDRESS_SIZE - 1 - i] = p & 0xFF; p >>= 8; @@ -60,11 +60,19 @@ static inline void fill_target_address(uint8_t *buffer, const void *addr) { void eeprom_driver_init(void) {} void eeprom_driver_erase(void) { +#ifdef CONSOLE_ENABLE + uint32_t start = timer_read32(); +#endif + uint8_t buf[EXTERNAL_EEPROM_PAGE_SIZE]; memset(buf, 0x00, EXTERNAL_EEPROM_PAGE_SIZE); - for (intptr_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) { - eeprom_write_block(buf, (void *)addr, EXTERNAL_EEPROM_PAGE_SIZE); + for (uint32_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) { + eeprom_write_block(buf, (void *)(uintptr_t)addr, EXTERNAL_EEPROM_PAGE_SIZE); } + +#ifdef CONSOLE_ENABLE + dprintf("EEPROM erase took %ldms to complete\n", ((long)(timer_read32() - start))); +#endif } void eeprom_read_block(void *buf, const void *addr, size_t len) { @@ -72,8 +80,8 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) { fill_target_address(complete_packet, addr); init_i2c_if_required(); - i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100); - i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), buf, len, 100); + i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100); + i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), buf, len, 100); #ifdef DEBUG_EEPROM_OUTPUT dprintf("[EEPROM R] 0x%04X: ", ((int)addr)); @@ -85,14 +93,14 @@ void eeprom_read_block(void *buf, const void *addr, size_t len) { } void eeprom_write_block(const void *buf, void *addr, size_t len) { - uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE]; - uint8_t *read_buf = (uint8_t *)buf; - intptr_t target_addr = (intptr_t)addr; + uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE]; + uint8_t * read_buf = (uint8_t *)buf; + uintptr_t target_addr = (uintptr_t)addr; init_i2c_if_required(); while (len > 0) { - intptr_t page_offset = target_addr % EXTERNAL_EEPROM_PAGE_SIZE; - int write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset; + uintptr_t page_offset = target_addr % EXTERNAL_EEPROM_PAGE_SIZE; + int write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset; if (write_length > len) { write_length = len; } @@ -110,7 +118,7 @@ void eeprom_write_block(const void *buf, void *addr, size_t len) { dprintf("\n"); #endif // DEBUG_EEPROM_OUTPUT - i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100); + i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((uintptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100); wait_ms(EXTERNAL_EEPROM_WRITE_TIME); read_buf += write_length; diff --git a/drivers/eeprom/eeprom_spi.c b/drivers/eeprom/eeprom_spi.c new file mode 100644 index 0000000000..e10aaf14c8 --- /dev/null +++ b/drivers/eeprom/eeprom_spi.c @@ -0,0 +1,231 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <stdint.h> +#include <string.h> + +/* + Note that the implementations of eeprom_XXXX_YYYY on AVR are normally + provided by avr-libc. The same functions are reimplemented below and are + rerouted to the external SPI equivalent. + + Seemingly, as this is compiled from within QMK, the object file generated + during the build overrides the avr-libc implementation during the linking + stage. + + On other platforms such as ARM, there are no provided implementations, so + there is nothing to override during linkage. +*/ + +#include "wait.h" +#include "spi_master.h" +#include "eeprom.h" +#include "eeprom_spi.h" + +#define CMD_WREN 6 +#define CMD_WRDI 4 +#define CMD_RDSR 5 +#define CMD_WRSR 1 +#define CMD_READ 3 +#define CMD_WRITE 2 + +#define SR_WIP 0x01 + +// #define DEBUG_EEPROM_OUTPUT + +#ifndef EXTERNAL_EEPROM_SPI_TIMEOUT +# define EXTERNAL_EEPROM_SPI_TIMEOUT 100 +#endif + +#ifdef CONSOLE_ENABLE +# include "print.h" +#endif // CONSOLE_ENABLE + +static void init_spi_if_required(void) { + static int done = 0; + if (!done) { + spi_init(); + done = 1; + } +} + +static bool spi_eeprom_start(void) { return spi_start(EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN, EXTERNAL_EEPROM_SPI_LSBFIRST, EXTERNAL_EEPROM_SPI_MODE, EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR); } + +static spi_status_t spi_eeprom_wait_while_busy(int timeout) { + uint32_t deadline = timer_read32() + timeout; + spi_status_t response; + do { + spi_write(CMD_RDSR); + response = spi_read(); + if (timer_read32() >= deadline) { + return SPI_STATUS_TIMEOUT; + } + } while (response & SR_WIP); + return SPI_STATUS_SUCCESS; +} + +static void spi_eeprom_transmit_address(uintptr_t addr) { + uint8_t buffer[EXTERNAL_EEPROM_ADDRESS_SIZE]; + + for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) { + buffer[EXTERNAL_EEPROM_ADDRESS_SIZE - 1 - i] = addr & 0xFF; + addr >>= 8; + } + + spi_transmit(buffer, EXTERNAL_EEPROM_ADDRESS_SIZE); +} + +//---------------------------------------------------------------------------------------------------------------------- + +void eeprom_driver_init(void) {} + +void eeprom_driver_erase(void) { +#ifdef CONSOLE_ENABLE + uint32_t start = timer_read32(); +#endif + + uint8_t buf[EXTERNAL_EEPROM_PAGE_SIZE]; + memset(buf, 0x00, EXTERNAL_EEPROM_PAGE_SIZE); + for (uint32_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) { + eeprom_write_block(buf, (void *)(uintptr_t)addr, EXTERNAL_EEPROM_PAGE_SIZE); + } + +#ifdef CONSOLE_ENABLE + dprintf("EEPROM erase took %ldms to complete\n", ((long)(timer_read32() - start))); +#endif +} + +void eeprom_read_block(void *buf, const void *addr, size_t len) { + init_spi_if_required(); + + //------------------------------------------------- + // Wait for the write-in-progress bit to be cleared + bool res = spi_eeprom_start(); + if (!res) { + dprint("failed to start SPI for WIP check\n"); + memset(buf, 0, len); + return; + } + + spi_status_t response = spi_eeprom_wait_while_busy(EXTERNAL_EEPROM_SPI_TIMEOUT); + spi_stop(); + if (response == SPI_STATUS_TIMEOUT) { + dprint("SPI timeout for WIP check\n"); + memset(buf, 0, len); + return; + } + + //------------------------------------------------- + // Perform read + res = spi_eeprom_start(); + if (!res) { + dprint("failed to start SPI for read\n"); + memset(buf, 0, len); + return; + } + + spi_write(CMD_READ); + spi_eeprom_transmit_address((uintptr_t)addr); + spi_receive(buf, len); + +#ifdef DEBUG_EEPROM_OUTPUT + dprintf("[EEPROM R] 0x%08lX: ", ((uint32_t)(uintptr_t)addr)); + for (size_t i = 0; i < len; ++i) { + dprintf(" %02X", (int)(((uint8_t *)buf)[i])); + } + dprintf("\n"); +#endif // DEBUG_EEPROM_OUTPUT + + spi_stop(); +} + +void eeprom_write_block(const void *buf, void *addr, size_t len) { + init_spi_if_required(); + + bool res; + uint8_t * read_buf = (uint8_t *)buf; + uintptr_t target_addr = (uintptr_t)addr; + + while (len > 0) { + uintptr_t page_offset = target_addr % EXTERNAL_EEPROM_PAGE_SIZE; + int write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset; + if (write_length > len) { + write_length = len; + } + + //------------------------------------------------- + // Wait for the write-in-progress bit to be cleared + res = spi_eeprom_start(); + if (!res) { + dprint("failed to start SPI for WIP check\n"); + return; + } + + spi_status_t response = spi_eeprom_wait_while_busy(EXTERNAL_EEPROM_SPI_TIMEOUT); + spi_stop(); + if (response == SPI_STATUS_TIMEOUT) { + dprint("SPI timeout for WIP check\n"); + return; + } + + //------------------------------------------------- + // Enable writes + res = spi_eeprom_start(); + if (!res) { + dprint("failed to start SPI for write-enable\n"); + return; + } + + spi_write(CMD_WREN); + spi_stop(); + + //------------------------------------------------- + // Perform the write + res = spi_eeprom_start(); + if (!res) { + dprint("failed to start SPI for write\n"); + return; + } + +#ifdef DEBUG_EEPROM_OUTPUT + dprintf("[EEPROM W] 0x%08lX: ", ((uint32_t)(uintptr_t)target_addr)); + for (size_t i = 0; i < write_length; i++) { + dprintf(" %02X", (int)(uint8_t)(read_buf[i])); + } + dprintf("\n"); +#endif // DEBUG_EEPROM_OUTPUT + + spi_write(CMD_WRITE); + spi_eeprom_transmit_address(target_addr); + spi_transmit(read_buf, write_length); + spi_stop(); + + read_buf += write_length; + target_addr += write_length; + len -= write_length; + } + + //------------------------------------------------- + // Disable writes + res = spi_eeprom_start(); + if (!res) { + dprint("failed to start SPI for write-disable\n"); + return; + } + + spi_write(CMD_WRDI); + spi_stop(); +} diff --git a/drivers/eeprom/eeprom_spi.h b/drivers/eeprom/eeprom_spi.h new file mode 100644 index 0000000000..282c603565 --- /dev/null +++ b/drivers/eeprom/eeprom_spi.h @@ -0,0 +1,80 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* + The slave select pin of the EEPROM. + This needs to be a normal GPIO pin_t value, such as A7. +*/ +#ifndef EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN +# error "No chip select pin defined -- missing EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN" +#endif + +/* + The clock divisor for SPI to ensure that the MCU is within the + specifications of the EEPROM chip. Generally this will be PCLK divided by + the intended divisor -- check your clock settings and the datasheet of + your EEPROM. +*/ +#ifndef EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR +# ifdef __AVR__ +# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 +# else +# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 +# endif +#endif + +/* + The SPI mode to communicate with the EEPROM. +*/ +#ifndef EXTERNAL_EEPROM_SPI_MODE +# define EXTERNAL_EEPROM_SPI_MODE 0 +#endif + +/* + Whether or not the SPI communication between the MCU and EEPROM should be + LSB-first. +*/ +#ifndef EXTERNAL_EEPROM_SPI_LSBFIRST +# define EXTERNAL_EEPROM_SPI_LSBFIRST false +#endif + +/* + The total size of the EEPROM, in bytes. The EEPROM datasheet will usually + specify this value in kbits, and will require conversion to bytes. +*/ +#ifndef EXTERNAL_EEPROM_BYTE_COUNT +# define EXTERNAL_EEPROM_BYTE_COUNT 8192 +#endif + +/* + The page size in bytes of the EEPROM, as specified in the datasheet. +*/ +#ifndef EXTERNAL_EEPROM_PAGE_SIZE +# define EXTERNAL_EEPROM_PAGE_SIZE 32 +#endif + +/* + The address size in bytes of the EEPROM. For EEPROMs with <=256 bytes, this + will likely be 1. For EEPROMs >256 and <=65536, this will be 2. For EEPROMs + >65536, this will likely need to be 4. + + As expected, consult the datasheet for specifics of your EEPROM. +*/ +#ifndef EXTERNAL_EEPROM_ADDRESS_SIZE +# define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +#endif diff --git a/keyboards/handwired/onekey/keymaps/eep_rst/keymap.c b/keyboards/handwired/onekey/keymaps/eep_rst/keymap.c new file mode 100644 index 0000000000..adb8e4cd2f --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/eep_rst/keymap.c @@ -0,0 +1,5 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( EEP_RST ) +}; |