diff options
| -rw-r--r-- | platforms/chibios/drivers/ws2812_pwm.c | 18 | ||||
| -rw-r--r-- | platforms/chibios/drivers/ws2812_spi.c | 15 |
2 files changed, 10 insertions, 23 deletions
diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c index 8c0259fb91..792de85ce9 100644 --- a/platforms/chibios/drivers/ws2812_pwm.c +++ b/platforms/chibios/drivers/ws2812_pwm.c @@ -17,25 +17,13 @@ # define WS2812_PWM_CHANNEL 2 // Channel #endif #ifndef WS2812_PWM_PAL_MODE -# if defined(WB32F3G71xx) || defined(WB32FQ95xx) -# define WS2812_PWM_PAL_MODE 1 // DI Pin's alternate function value -# else -# define WS2812_PWM_PAL_MODE 2 // DI Pin's alternate function value -# endif +# define WS2812_PWM_PAL_MODE 2 // DI Pin's alternate function value #endif #ifndef WS2812_DMA_STREAM -# if defined(WB32F3G71xx) || defined(WB32FQ95xx) -# define WS2812_DMA_STREAM WB32_DMA1_STREAM1 // DMA Stream for TIMx_UP -# else -# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP -# endif +# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP #endif #ifndef WS2812_DMA_CHANNEL -# if defined(WB32F3G71xx) || defined(WB32FQ95xx) -# define WS2812_DMA_CHANNEL WB32_DMAC_HWHIF_TIM2_UP // DMA Channel for TIM2_UP -# else -# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP -# endif +# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP #endif #if (STM32_DMA_SUPPORTS_DMAMUX == TRUE) && !defined(WS2812_DMAMUX_ID) # error "please consult your MCU's datasheet and specify in your config.h: #define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM?_UP" diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index 9ee552b187..a73eb69720 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -5,11 +5,7 @@ // Define the spi your LEDs are plugged to here #ifndef WS2812_SPI -# if defined(WB32F3G71xx) || defined(WB32FQ95xx) -# define WS2812_SPI SPIDQ -# else -# define WS2812_SPI SPID1 -# endif +# define WS2812_SPI SPID1 #endif #ifndef WS2812_SPI_MOSI_PAL_MODE @@ -20,6 +16,10 @@ # define WS2812_SPI_SCK_PAL_MODE 5 #endif +#ifndef WS2812_SPI_DIVISOR +# define WS2812_SPI_DIVISOR 16 +#endif + // Push Pull or Open Drain Configuration // Default Push Pull #ifndef WS2812_EXTERNAL_PULLUP @@ -46,7 +46,7 @@ # define WS2812_SPI_DIVISOR_CR1_BR_X (SPI_CR1_BR_0) #elif WS2812_SPI_DIVISOR == 8 # define WS2812_SPI_DIVISOR_CR1_BR_X (SPI_CR1_BR_1) -#elif WS2812_SPI_DIVISOR == 16 // same as default +#elif WS2812_SPI_DIVISOR == 16 // default # define WS2812_SPI_DIVISOR_CR1_BR_X (SPI_CR1_BR_1 | SPI_CR1_BR_0) #elif WS2812_SPI_DIVISOR == 32 # define WS2812_SPI_DIVISOR_CR1_BR_X (SPI_CR1_BR_2) @@ -57,8 +57,7 @@ #elif WS2812_SPI_DIVISOR == 256 # define WS2812_SPI_DIVISOR_CR1_BR_X (SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0) #else -# define WS2812_SPI_DIVISOR_CR1_BR_X (SPI_CR1_BR_1 | SPI_CR1_BR_0) // default -# define WS2812_SPI_DIVISOR 16 +# error "Configured WS2812_SPI_DIVISOR value is not supported at this time." #endif // Use SPI circular buffer |