summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--build_test.mk1
-rw-r--r--builddefs/bootloader.mk40
-rw-r--r--builddefs/message.mk5
-rw-r--r--common_features.mk6
-rw-r--r--data/schemas/keyboard.jsonschema4
-rw-r--r--docs/ChangeLog/20220226/PR15304.md13
-rw-r--r--docs/feature_debounce_type.md1
-rw-r--r--docs/feature_haptic_feedback.md4
-rw-r--r--docs/feature_key_lock.md3
-rw-r--r--docs/feature_pointing_device.md122
-rw-r--r--docs/feature_split_keyboard.md8
-rw-r--r--docs/feature_wpm.md2
-rw-r--r--docs/internals_gpio_control.md24
-rw-r--r--docs/keycodes.md1
-rw-r--r--docs/keycodes_magic.md1
-rw-r--r--drivers/bluetooth/rn42.c99
-rw-r--r--drivers/bluetooth/rn42.h25
-rw-r--r--drivers/sensors/adns9800.c14
-rw-r--r--drivers/sensors/pimoroni_trackball.c22
-rw-r--r--drivers/sensors/pimoroni_trackball.h9
-rw-r--r--drivers/sensors/pmw3360.c248
-rw-r--r--drivers/sensors/pmw3360.h18
-rw-r--r--keyboards/40percentclub/ut47/keymaps/default/keymap.c6
-rw-r--r--keyboards/40percentclub/ut47/keymaps/non-us/keymap.c6
-rw-r--r--keyboards/40percentclub/ut47/keymaps/nordic/keymap.c6
-rw-r--r--keyboards/40percentclub/ut47/keymaps/rgb/keymap.c6
-rw-r--r--keyboards/40percentclub/ut47/matrix.c14
-rw-r--r--keyboards/40percentclub/ut47/rules.mk3
-rw-r--r--keyboards/40percentclub/ut47/ut47.c8
-rw-r--r--keyboards/ai03/orbit/config.h13
-rw-r--r--keyboards/ai03/orbit/keymaps/default/keymap.c16
-rw-r--r--keyboards/ai03/orbit/matrix.c328
-rw-r--r--keyboards/ai03/orbit/orbit.c270
-rw-r--r--keyboards/ai03/orbit/orbit.h17
-rw-r--r--keyboards/ai03/orbit/readme.md6
-rw-r--r--keyboards/ai03/orbit/rules.mk10
-rw-r--r--keyboards/ai03/orbit/serial.c545
-rw-r--r--keyboards/ai03/orbit/serial.h62
-rw-r--r--keyboards/ai03/orbit/split_flags.c5
-rw-r--r--keyboards/ai03/orbit/split_flags.h15
-rw-r--r--keyboards/ai03/orbit/split_util.c87
-rw-r--r--keyboards/ai03/orbit/split_util.h10
-rw-r--r--keyboards/ai03/orbit/transport.c238
-rw-r--r--keyboards/ai03/orbit/transport.h42
-rw-r--r--keyboards/amj96/matrix.c6
-rw-r--r--keyboards/angel64/alpha/matrix.c7
-rw-r--r--keyboards/angel64/rev1/matrix.c7
-rw-r--r--keyboards/bpiphany/kitten_paw/matrix.c7
-rw-r--r--keyboards/bpiphany/pegasushoof/2013/matrix.c7
-rw-r--r--keyboards/centromere/config.h9
-rw-r--r--keyboards/centromere/matrix.c126
-rw-r--r--keyboards/centromere/rules.mk23
-rw-r--r--keyboards/chimera_ergo/config.h9
-rw-r--r--keyboards/chimera_ergo/matrix.c135
-rw-r--r--keyboards/chimera_ergo/rules.mk19
-rw-r--r--keyboards/chimera_ls/config.h9
-rw-r--r--keyboards/chimera_ls/matrix.c139
-rw-r--r--keyboards/chimera_ls/rules.mk17
-rw-r--r--keyboards/chimera_ortho/config.h9
-rw-r--r--keyboards/chimera_ortho/matrix.c125
-rw-r--r--keyboards/chimera_ortho/rules.mk17
-rw-r--r--keyboards/chimera_ortho_plus/config.h9
-rw-r--r--keyboards/chimera_ortho_plus/matrix.c125
-rw-r--r--keyboards/chimera_ortho_plus/rules.mk5
-rw-r--r--keyboards/comet46/config.h9
-rw-r--r--keyboards/comet46/matrix.c125
-rw-r--r--keyboards/comet46/rules.mk18
-rw-r--r--keyboards/converter/palm_usb/config.h55
-rw-r--r--keyboards/converter/palm_usb/matrix.c15
-rw-r--r--keyboards/converter/palm_usb/post_rules.mk7
-rw-r--r--keyboards/converter/palm_usb/rules.mk1
-rw-r--r--keyboards/converter/sun_usb/command_extra.c22
-rw-r--r--keyboards/converter/sun_usb/config.h47
-rw-r--r--keyboards/converter/sun_usb/led.c6
-rw-r--r--keyboards/converter/sun_usb/matrix.c27
-rw-r--r--keyboards/converter/sun_usb/post_rules.mk6
-rw-r--r--keyboards/converter/sun_usb/rules.mk1
-rw-r--r--keyboards/converter/usb_usb/custom_matrix.cpp4
-rw-r--r--keyboards/dc01/arrow/matrix.c8
-rw-r--r--keyboards/dc01/left/matrix.c8
-rw-r--r--keyboards/dc01/numpad/matrix.c8
-rw-r--r--keyboards/dc01/right/matrix.c8
-rw-r--r--keyboards/dichotomy/config.h9
-rwxr-xr-xkeyboards/dichotomy/dichotomy.c8
-rwxr-xr-xkeyboards/dichotomy/matrix.c10
-rwxr-xr-xkeyboards/dichotomy/rules.mk3
-rw-r--r--keyboards/dm9records/ergoinu/config.h10
-rw-r--r--keyboards/dm9records/ergoinu/ergoinu.c17
-rw-r--r--keyboards/dm9records/ergoinu/ergoinu.h5
-rw-r--r--keyboards/dm9records/ergoinu/keymaps/default/config.h24
-rw-r--r--keyboards/dm9records/ergoinu/keymaps/default/keymap.c41
-rw-r--r--keyboards/dm9records/ergoinu/keymaps/default/rules.mk18
-rw-r--r--keyboards/dm9records/ergoinu/keymaps/default_jis/config.h24
-rw-r--r--keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c26
-rw-r--r--keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk18
-rw-r--r--keyboards/dm9records/ergoinu/matrix.c292
-rw-r--r--keyboards/dm9records/ergoinu/post_rules.mk9
-rw-r--r--keyboards/dm9records/ergoinu/readme.md9
-rw-r--r--keyboards/dm9records/ergoinu/rules.mk20
-rw-r--r--keyboards/dm9records/ergoinu/serial.c295
-rw-r--r--keyboards/dm9records/ergoinu/serial.h24
-rw-r--r--keyboards/dm9records/ergoinu/serial_config.h11
-rw-r--r--keyboards/dm9records/ergoinu/split_util.c56
-rw-r--r--keyboards/dm9records/ergoinu/split_util.h12
-rw-r--r--keyboards/duck/jetfire/matrix.c6
-rw-r--r--keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h2
-rw-r--r--keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h2
-rw-r--r--keyboards/durgod/dgk6x/config.h3
-rw-r--r--keyboards/durgod/dgk6x/halconf.h3
-rw-r--r--keyboards/durgod/k3x0/config.h3
-rw-r--r--keyboards/durgod/k3x0/halconf.h2
-rw-r--r--keyboards/ergodox_stm32/matrix.c4
-rw-r--r--keyboards/ergotaco/matrix.c5
-rw-r--r--keyboards/gboards/gergoplex/matrix.c5
-rw-r--r--keyboards/georgi/matrix.c5
-rw-r--r--keyboards/gergo/matrix.c5
-rw-r--r--keyboards/gmmk/pro/iso/keymaps/vitoni/config.h20
-rw-r--r--keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c148
-rw-r--r--keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc104
-rw-r--r--keyboards/handwired/dactyl/matrix.c8
-rw-r--r--keyboards/handwired/frenchdev/matrix.c6
-rw-r--r--keyboards/handwired/not_so_minidox/config.h5
-rw-r--r--keyboards/handwired/not_so_minidox/i2c.c162
-rw-r--r--keyboards/handwired/not_so_minidox/i2c.h46
-rw-r--r--keyboards/handwired/not_so_minidox/keymaps/default/keymap.c56
-rw-r--r--keyboards/handwired/not_so_minidox/matrix.c308
-rw-r--r--keyboards/handwired/not_so_minidox/rules.mk17
-rw-r--r--keyboards/handwired/not_so_minidox/serial.c228
-rw-r--r--keyboards/handwired/not_so_minidox/serial.h23
-rw-r--r--keyboards/handwired/not_so_minidox/split_util.c84
-rw-r--r--keyboards/handwired/not_so_minidox/split_util.h17
-rw-r--r--keyboards/handwired/onekey/teensy_32/rules.mk3
-rw-r--r--keyboards/handwired/onekey/teensy_lc/rules.mk3
-rw-r--r--keyboards/handwired/promethium/matrix.c8
-rw-r--r--keyboards/handwired/pterodactyl/matrix.c8
-rw-r--r--keyboards/handwired/wakizashi40/config.h20
-rw-r--r--keyboards/handwired/wakizashi40/info.json88
-rw-r--r--keyboards/handwired/wakizashi40/keymaps/default/keymap.c44
-rw-r--r--keyboards/handwired/wakizashi40/keymaps/via/keymap.c92
-rw-r--r--keyboards/handwired/wakizashi40/keymaps/via/rules.mk4
-rw-r--r--keyboards/handwired/wakizashi40/readme.md19
-rw-r--r--keyboards/handwired/wakizashi40/rules.mk1
-rw-r--r--keyboards/helix/pico/matrix.c6
-rw-r--r--keyboards/helix/rev1/matrix.c6
-rw-r--r--keyboards/helix/rev2/matrix.c6
-rw-r--r--keyboards/hhkb/ansi/matrix.c9
-rw-r--r--keyboards/hhkb/jp/matrix.c9
-rwxr-xr-xkeyboards/hid_liber/matrix.c6
-rwxr-xr-xkeyboards/honeycomb/config.h9
-rwxr-xr-xkeyboards/honeycomb/honeycomb.c6
-rwxr-xr-xkeyboards/honeycomb/matrix.c10
-rwxr-xr-xkeyboards/honeycomb/rules.mk3
-rw-r--r--keyboards/kinesis/alvicstep/matrix.c6
-rw-r--r--keyboards/massdrop/alt/rules.mk3
-rw-r--r--keyboards/massdrop/ctrl/rules.mk3
-rw-r--r--keyboards/matrix/m20add/m20add.c19
-rw-r--r--keyboards/mechlovin/olly/jf/rules.mk4
-rw-r--r--keyboards/meira/matrix.c6
-rw-r--r--keyboards/mitosis/config.h9
-rw-r--r--keyboards/mitosis/matrix.c126
-rw-r--r--keyboards/mitosis/rules.mk21
-rw-r--r--keyboards/nek_type_a/matrix.c8
-rw-r--r--keyboards/planck/keymaps/thermal_printer/config.h12
-rw-r--r--keyboards/redox_w/config.h9
-rw-r--r--keyboards/redox_w/matrix.c135
-rw-r--r--keyboards/redox_w/rules.mk19
-rwxr-xr-xkeyboards/redscarf_iiplus/verb/matrix.c7
-rwxr-xr-xkeyboards/redscarf_iiplus/verc/matrix.c7
-rw-r--r--keyboards/redscarf_iiplus/verd/matrix.c7
-rw-r--r--keyboards/rocketboard_16/rules.mk2
-rw-r--r--keyboards/sirius/uni660/rev1/config.h9
-rw-r--r--keyboards/sirius/uni660/rev1/matrix.c131
-rw-r--r--keyboards/sirius/uni660/rev1/rules.mk5
-rw-r--r--keyboards/sirius/uni660/rev2/ansi/config.h9
-rw-r--r--keyboards/sirius/uni660/rev2/iso/config.h9
-rw-r--r--keyboards/sirius/uni660/rev2/matrix.c131
-rw-r--r--keyboards/sirius/uni660/rev2/rules.mk5
-rw-r--r--keyboards/sirius/unigo66/custom_matrix.cpp4
-rw-r--r--keyboards/sixkeyboard/matrix.c5
-rw-r--r--keyboards/sx60/matrix.c8
-rw-r--r--keyboards/telophase/config.h9
-rw-r--r--keyboards/telophase/matrix.c10
-rw-r--r--keyboards/telophase/rules.mk3
-rw-r--r--keyboards/tgr/jane/v2ce/rules.mk2
-rw-r--r--keyboards/thedogkeyboard/matrix.c7
-rw-r--r--keyboards/yanghu/unicorne/config.h6
-rw-r--r--keyboards/yosino58/rev1/matrix.c6
-rwxr-xr-xlib/python/qmk/cli/generate/develop_pr_list.py2
-rw-r--r--platforms/arm_atsam/bootloaders/md_boot.c (renamed from platforms/arm_atsam/bootloader.c)49
-rw-r--r--platforms/arm_atsam/gpio.h12
-rw-r--r--platforms/avr/bootloader.c293
-rw-r--r--platforms/avr/bootloaders/bootloadhid.c33
-rw-r--r--platforms/avr/bootloaders/caterina.c39
-rw-r--r--platforms/avr/bootloaders/dfu.c52
-rw-r--r--platforms/avr/bootloaders/halfkay.c128
-rw-r--r--platforms/avr/bootloaders/none.c19
-rw-r--r--platforms/avr/bootloaders/usbasploader.c56
-rw-r--r--platforms/avr/drivers/i2c_master.c7
-rw-r--r--platforms/avr/drivers/serial.c7
-rw-r--r--platforms/avr/gpio.h17
-rw-r--r--platforms/chibios/bootloader.c145
-rw-r--r--platforms/chibios/bootloaders/gd32v_dfu.c39
-rw-r--r--platforms/chibios/bootloaders/halfkay.c25
-rw-r--r--platforms/chibios/bootloaders/kiibohd.c32
-rw-r--r--platforms/chibios/bootloaders/none.c19
-rw-r--r--platforms/chibios/bootloaders/stm32_dfu.c94
-rw-r--r--platforms/chibios/bootloaders/stm32duino.c21
-rw-r--r--platforms/chibios/bootloaders/tinyuf2.c34
-rw-r--r--platforms/chibios/drivers/i2c_master.c59
-rw-r--r--platforms/chibios/drivers/i2c_master.h61
-rw-r--r--platforms/chibios/gpio.h24
-rw-r--r--platforms/common.mk2
-rw-r--r--platforms/test/bootloaders/none.c (renamed from platforms/test/bootloader.c)0
-rw-r--r--quantum/action.c16
-rw-r--r--quantum/action_util.c9
-rw-r--r--quantum/audio/audio.c3
-rw-r--r--quantum/debounce.h2
-rw-r--r--quantum/debounce/asym_eager_defer_pk.c1
-rw-r--r--quantum/debounce/none.c2
-rw-r--r--quantum/debounce/sym_defer_g.c2
-rw-r--r--quantum/debounce/sym_defer_pk.c1
-rw-r--r--quantum/debounce/sym_defer_pr.c72
-rw-r--r--quantum/debounce/sym_eager_pk.c1
-rw-r--r--quantum/debounce/sym_eager_pr.c1
-rw-r--r--quantum/debounce/tests/rules.mk5
-rw-r--r--quantum/debounce/tests/sym_defer_pr_tests.cpp238
-rw-r--r--quantum/debounce/tests/testlist.mk1
-rw-r--r--quantum/matrix.c35
-rw-r--r--quantum/matrix.h3
-rw-r--r--quantum/matrix_common.c81
-rw-r--r--quantum/pointing_device.c389
-rw-r--r--quantum/pointing_device.h13
-rw-r--r--quantum/pointing_device_drivers.c29
-rw-r--r--quantum/process_keycode/process_audio.c1
-rw-r--r--quantum/process_keycode/process_audio.h1
-rw-r--r--quantum/process_keycode/process_key_lock.c5
-rw-r--r--quantum/process_keycode/process_key_lock.h1
-rw-r--r--quantum/process_keycode/process_magic.c4
-rw-r--r--quantum/process_keycode/process_printer.c5
-rw-r--r--quantum/process_keycode/process_printer.h2
-rw-r--r--quantum/quantum.c12
-rw-r--r--quantum/quantum.h4
-rw-r--r--quantum/quantum_keycodes.h3
-rw-r--r--quantum/split_common/transaction_id_define.h6
-rw-r--r--quantum/split_common/transactions.c79
-rw-r--r--quantum/split_common/transport.h13
-rw-r--r--quantum/wpm.c75
-rw-r--r--quantum/wpm.h2
-rw-r--r--readme.md4
-rw-r--r--tests/auto_shift/test_auto_shift.cpp3
-rw-r--r--tests/basic/test_action_layer.cpp33
-rw-r--r--tests/basic/test_keypress.cpp55
-rw-r--r--tests/basic/test_one_shot_keys.cpp8
-rw-r--r--tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp3
-rw-r--r--tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp3
-rw-r--r--tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp3
-rw-r--r--tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp2
-rw-r--r--tests/test_common/test_fixture.cpp3
-rw-r--r--tmk_core/protocol/arm_atsam/arm_atsam_protocol.h1
-rw-r--r--tmk_core/protocol/arm_atsam/md_bootloader.h24
-rw-r--r--tmk_core/protocol/arm_atsam/startup.c6
-rw-r--r--tmk_core/protocol/arm_atsam/usb/udc.c5
-rw-r--r--tmk_core/protocol/lufa/lufa.c77
-rw-r--r--tmk_core/protocol/usb_descriptor.c2
-rw-r--r--tmk_core/protocol/vusb/vusb.c1
-rw-r--r--users/vitoni/readme.adoc16
-rw-r--r--users/vitoni/rgb_matrix_effects.c236
-rw-r--r--users/vitoni/rgb_matrix_effects.h174
-rw-r--r--users/vitoni/rules.mk4
-rw-r--r--users/vitoni/utils.c129
-rw-r--r--users/vitoni/utils.h80
-rw-r--r--users/vitoni/vitoni.c131
-rw-r--r--users/vitoni/vitoni.h30
-rwxr-xr-xutil/update_chibios_mirror.sh8
274 files changed, 4125 insertions, 6210 deletions
diff --git a/build_test.mk b/build_test.mk
index 136a0455f0..ec6699b4ea 100644
--- a/build_test.mk
+++ b/build_test.mk
@@ -43,6 +43,7 @@ all: elf
VPATH += $(COMMON_VPATH)
PLATFORM:=TEST
PLATFORM_KEY:=test
+BOOTLOADER_TYPE:=none
ifeq ($(strip $(DEBUG)), 1)
CONSOLE_ENABLE = yes
diff --git a/builddefs/bootloader.mk b/builddefs/bootloader.mk
index ccb92392d9..470febc346 100644
--- a/builddefs/bootloader.mk
+++ b/builddefs/bootloader.mk
@@ -30,6 +30,7 @@
# bootloadhid HIDBootFlash compatible (ATmega32A)
# usbasploader USBaspLoader (ATmega328P)
# ARM:
+# halfkay PJRC Teensy
# kiibohd Input:Club Kiibohd bootloader (only used on their boards)
# stm32duino STM32Duino (STM32F103x8)
# stm32-dfu STM32 USB DFU in ROM
@@ -43,6 +44,8 @@
ifeq ($(strip $(BOOTLOADER)), atmel-dfu)
OPT_DEFS += -DBOOTLOADER_ATMEL_DFU
OPT_DEFS += -DBOOTLOADER_DFU
+ BOOTLOADER_TYPE = dfu
+
ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
BOOTLOADER_SIZE = 4096
endif
@@ -53,6 +56,8 @@ endif
ifeq ($(strip $(BOOTLOADER)), lufa-dfu)
OPT_DEFS += -DBOOTLOADER_LUFA_DFU
OPT_DEFS += -DBOOTLOADER_DFU
+ BOOTLOADER_TYPE = dfu
+
ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
BOOTLOADER_SIZE ?= 4096
endif
@@ -63,6 +68,8 @@ endif
ifeq ($(strip $(BOOTLOADER)), qmk-dfu)
OPT_DEFS += -DBOOTLOADER_QMK_DFU
OPT_DEFS += -DBOOTLOADER_DFU
+ BOOTLOADER_TYPE = dfu
+
ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647))
BOOTLOADER_SIZE ?= 4096
endif
@@ -73,10 +80,14 @@ endif
ifeq ($(strip $(BOOTLOADER)), qmk-hid)
OPT_DEFS += -DBOOTLOADER_QMK_HID
OPT_DEFS += -DBOOTLOADER_HID
+ BOOTLOADER_TYPE = dfu
+
BOOTLOADER_SIZE ?= 4096
endif
ifeq ($(strip $(BOOTLOADER)), halfkay)
OPT_DEFS += -DBOOTLOADER_HALFKAY
+ BOOTLOADER_TYPE = halfkay
+
ifeq ($(strip $(MCU)), atmega32u4)
BOOTLOADER_SIZE = 512
endif
@@ -86,18 +97,26 @@ ifeq ($(strip $(BOOTLOADER)), halfkay)
endif
ifeq ($(strip $(BOOTLOADER)), caterina)
OPT_DEFS += -DBOOTLOADER_CATERINA
+ BOOTLOADER_TYPE = caterina
+
BOOTLOADER_SIZE = 4096
endif
ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID))
OPT_DEFS += -DBOOTLOADER_BOOTLOADHID
+ BOOTLOADER_TYPE = bootloadhid
+
BOOTLOADER_SIZE = 4096
endif
ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp))
OPT_DEFS += -DBOOTLOADER_USBASP
+ BOOTLOADER_TYPE = usbasploader
+
BOOTLOADER_SIZE = 4096
endif
ifeq ($(strip $(BOOTLOADER)), lufa-ms)
OPT_DEFS += -DBOOTLOADER_MS
+ BOOTLOADER_TYPE = dfu
+
BOOTLOADER_SIZE ?= 8192
FIRMWARE_FORMAT = bin
cpfirmware: lufa_warning
@@ -115,6 +134,7 @@ endif
ifeq ($(strip $(BOOTLOADER)), stm32-dfu)
OPT_DEFS += -DBOOTLOADER_STM32_DFU
+ BOOTLOADER_TYPE = stm32_dfu
# Options to pass to dfu-util when flashing
DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave
@@ -122,6 +142,7 @@ ifeq ($(strip $(BOOTLOADER)), stm32-dfu)
endif
ifeq ($(strip $(BOOTLOADER)), apm32-dfu)
OPT_DEFS += -DBOOTLOADER_APM32_DFU
+ BOOTLOADER_TYPE = stm32_dfu
# Options to pass to dfu-util when flashing
DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave
@@ -129,6 +150,7 @@ ifeq ($(strip $(BOOTLOADER)), apm32-dfu)
endif
ifeq ($(strip $(BOOTLOADER)), gd32v-dfu)
OPT_DEFS += -DBOOTLOADER_GD32V_DFU
+ BOOTLOADER_TYPE = gd32v_dfu
# Options to pass to dfu-util when flashing
DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave
@@ -136,6 +158,8 @@ ifeq ($(strip $(BOOTLOADER)), gd32v-dfu)
endif
ifeq ($(strip $(BOOTLOADER)), kiibohd)
OPT_DEFS += -DBOOTLOADER_KIIBOHD
+ BOOTLOADER_TYPE = kiibohd
+
ifeq ($(strip $(MCU_ORIG)), MK20DX128)
MCU_LDSCRIPT = MK20DX128BLDR4
endif
@@ -151,8 +175,7 @@ ifeq ($(strip $(BOOTLOADER)), stm32duino)
OPT_DEFS += -DBOOTLOADER_STM32DUINO
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
BOARD = STM32_F103_STM32DUINO
- # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense
- STM32_BOOTLOADER_ADDRESS = 0x80000000
+ BOOTLOADER_TYPE = stm32duino
# Options to pass to dfu-util when flashing
DFU_ARGS = -d 1EAF:0003 -a 2 -R
@@ -160,4 +183,17 @@ ifeq ($(strip $(BOOTLOADER)), stm32duino)
endif
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
OPT_DEFS += -DBOOTLOADER_TINYUF2
+ BOOTLOADER_TYPE = tinyuf2
+endif
+ifeq ($(strip $(BOOTLOADER)), halfkay)
+ OPT_DEFS += -DBOOTLOADER_HALFKAY
+ BOOTLOADER_TYPE = halfkay
+endif
+ifeq ($(strip $(BOOTLOADER)), md-boot)
+ OPT_DEFS += -DBOOTLOADER_MD_BOOT
+ BOOTLOADER_TYPE = md_boot
+endif
+
+ifeq ($(strip $(BOOTLOADER_TYPE)),)
+ BOOTLOADER_TYPE = none
endif
diff --git a/builddefs/message.mk b/builddefs/message.mk
index cb4ef43719..1187491452 100644
--- a/builddefs/message.mk
+++ b/builddefs/message.mk
@@ -87,6 +87,7 @@ define GENERATE_MSG_AVAILABLE_KEYMAPS
endef
MSG_AVAILABLE_KEYMAPS = $(eval $(call GENERATE_MSG_AVAILABLE_KEYMAPS))$(MSG_AVAILABLE_KEYMAPS_ACTUAL)
+MSG_BOOTLOADER_NOT_FOUND_BASE = Bootloader not found. Make sure the board is in bootloader mode. See https://docs.qmk.fm/\#/newbs_flashing\n
MSG_CHECK_FILESIZE = Checking file size of $(TARGET).$(FIRMWARE_FORMAT)
MSG_CHECK_FILESIZE_SKIPPED = (Firmware size check does not yet support $(MCU_ORIG); skipping)
MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE) ($(OVER_SIZE) bytes over)\n
@@ -97,6 +98,6 @@ MSG_PYTHON_MISSING = $(ERROR_COLOR)ERROR:$(NO_COLOR) Cannot run \"qmk hello\"!\n
Please run $(BOLD)qmk setup$(NO_COLOR) to install all the dependencies QMK requires.\n\n
MSG_FLASH_BOOTLOADER = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's bootloader is not specified or is not supported by the \":flash\" target at this time.\n\n
MSG_FLASH_ARCH = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's architecture is not supported by the \":flash\" target at this time.\n\n
-MSG_BOOTLOADER_NOT_FOUND = $(ERROR_COLOR)ERROR:$(NO_COLOR) Bootloader not found. Trying again in 5s (Ctrl+C to cancel)\n
+MSG_BOOTLOADER_NOT_FOUND = $(ERROR_COLOR)ERROR:$(NO_COLOR) $(MSG_BOOTLOADER_NOT_FOUND_BASE) Trying again in 5s (Ctrl+C to cancel)\n
BOOTLOADER_RETRY_TIME ?= 0.5
-MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY = Bootloader not found. Trying again every $(BOOTLOADER_RETRY_TIME)s (Ctrl+C to cancel)
+MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY = $(MSG_BOOTLOADER_NOT_FOUND_BASE) Trying again every $(BOOTLOADER_RETRY_TIME)s (Ctrl+C to cancel)
diff --git a/common_features.mk b/common_features.mk
index 8c593024f0..5cde023d10 100644
--- a/common_features.mk
+++ b/common_features.mk
@@ -356,7 +356,7 @@ endif
ifeq ($(strip $(PRINTING_ENABLE)), yes)
OPT_DEFS += -DPRINTING_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c
- SRC += $(TMK_DIR)/protocol/serial_uart.c
+ QUANTUM_LIB_SRC += uart.c
endif
VARIABLE_TRACE ?= no
@@ -604,6 +604,7 @@ ifeq ($(strip $(UNICODE_ENABLE)), yes)
endif
ifeq ($(strip $(UNICODE_COMMON)), yes)
+ OPT_DEFS += -DUNICODE_COMMON_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
endif
@@ -719,6 +720,7 @@ ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
ifeq ($(strip $(BLUETOOTH_DRIVER)), RN42)
OPT_DEFS += -DMODULE_RN42
- SRC += $(TMK_DIR)/protocol/serial_uart.c
+ SRC += $(DRIVER_PATH)/bluetooth/rn42.c
+ QUANTUM_LIB_SRC += uart.c
endif
endif
diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema
index 308f9b782b..94bbbe7e85 100644
--- a/data/schemas/keyboard.jsonschema
+++ b/data/schemas/keyboard.jsonschema
@@ -57,7 +57,7 @@
},
"bootloader": {
"type": "string",
- "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"],
+ "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "md-boot", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"],
},
"bootloader_instructions": {
"type": "string",
@@ -69,7 +69,7 @@
"properties": {
"debounce_type": {
"type": "string",
- "enum": ["custom", "eager_pk", "eager_pr", "sym_defer_pk", "sym_eager_pk"]
+ "enum": ["custom", "eager_pk", "eager_pr", "sym_defer_pk", "sym_defer_pr", "sym_eager_pk"]
},
"firmware_format": {
"type": "string",
diff --git a/docs/ChangeLog/20220226/PR15304.md b/docs/ChangeLog/20220226/PR15304.md
new file mode 100644
index 0000000000..3cdb40db10
--- /dev/null
+++ b/docs/ChangeLog/20220226/PR15304.md
@@ -0,0 +1,13 @@
+### Split Common core now supports Pointing Devices ([#15304](https://github.com/qmk/qmk_firmware/pull/15304))
+
+Pointing devices can now be shared across a split keyboard with support for a single pointing device or a pointing device on each side.
+
+This feature can be enabled with `#define SPLIT_POINTING_ENABLE` and one of the following options:
+
+| Setting | Description |
+|---------------------------|------------------------------------|
+|`POINTING_DEVICE_LEFT` | Pointing device on the left side |
+|`POINTING_DEVICE_RIGHT` | Pointing device on the right side |
+|`POINTING_DEVICE_COMBINED` | Pointing device on both sides |
+
+See the [Pointing Device](../feature_pointing_device.md) documentation for further configuration options.
diff --git a/docs/feature_debounce_type.md b/docs/feature_debounce_type.md
index f37a785b1e..9cd736a24a 100644
--- a/docs/feature_debounce_type.md
+++ b/docs/feature_debounce_type.md
@@ -116,6 +116,7 @@ Where name of algorithm is one of:
For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be
appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use.
* ```sym_eager_pk``` - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key
+* ```sym_defer_pr``` - debouncing per row. On any state change, a per-row timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that row, the entire row is pushed. Can improve responsiveness over `sym_defer_g` while being less susceptible than per-key debouncers to noise.
* ```sym_defer_pk``` - debouncing per key. On any state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key status change is pushed.
* ```asym_eager_defer_pk``` - debouncing per key. On a key-down state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key. On a key-up state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key-up status change is pushed.
diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md
index c8c74cb8f0..bbdf7e122c 100644
--- a/docs/feature_haptic_feedback.md
+++ b/docs/feature_haptic_feedback.md
@@ -167,7 +167,7 @@ List of waveform sequences from the datasheet:
```
#define DRV_GREETING *sequence name or number*
```
-If haptic feedback is enabled, the keyboard will vibrate to a specific sqeuence during startup. That can be selected using the following define:
+If haptic feedback is enabled, the keyboard will vibrate to a specific sequence during startup. That can be selected using the following define:
```
#define DRV_MODE_DEFAULT *sequence name or number*
@@ -207,4 +207,4 @@ With the entry of `#define NO_HAPTIC_LOCKKEYS` in config.h, none of the followin
With the entry of `#define NO_HAPTIC_NAV` in config.h, none of the following keys will trigger a feedback: Print Screen, Pause, Insert, Delete, Page Down, Page Up, Left Arrow, Up Arrow, Right Arrow, Down Arrow, End, Home.
### NO_HAPTIC_NUMERIC
-With the entry of `#define NO_HAPTIC_NUMERIC` in config.h, none of the following keys between 0 and 9 (KC_1 ... KC_0) will trigger a feedback. \ No newline at end of file
+With the entry of `#define NO_HAPTIC_NUMERIC` in config.h, none of the following keys between 0 and 9 (KC_1 ... KC_0) will trigger a feedback.
diff --git a/docs/feature_key_lock.md b/docs/feature_key_lock.md
index 8e6e29f0e6..7681394229 100644
--- a/docs/feature_key_lock.md
+++ b/docs/feature_key_lock.md
@@ -19,4 +19,5 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th
Key Lock is only able to hold standard action keys and [One Shot modifier](one_shot_keys.md) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`).
This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held.
-Switching layers will not cancel the Key Lock.
+Switching layers will not cancel the Key Lock. The Key Lock can be cancelled by calling the `cancel_key_lock()` function.
+
diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md
index bd7fb36589..f8de92f3b4 100644
--- a/docs/feature_pointing_device.md
+++ b/docs/feature_pointing_device.md
@@ -30,7 +30,7 @@ The ADNS 5050 sensor uses a serial type protocol for communication, and requires
The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI.
-### ADSN 9800 Sensor
+### ADNS 9800 Sensor
To use the ADNS 9800 sensor, add this to your `rules.mk`
@@ -69,7 +69,7 @@ The Analog Joystick is an analog (ADC) driven sensor. There are a variety of jo
|`ANALOG_JOYSTICK_AXIS_MAX` | (Optional) Sets the upper range to be considered movement. | `1023` |
|`ANALOG_JOYSTICK_SPEED_REGULATOR` | (Optional) The divisor used to slow down movement. (lower makes it faster) | `20` |
|`ANALOG_JOYSTICK_READ_INTERVAL` | (Optional) The interval in milliseconds between reads. | `10` |
-|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maxiumum value used for motion. | `2` |
+|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maximum value used for motion. | `2` |
|`ANALOG_JOYSTICK_CLICK_PIN` | (Optional) The pin wired up to the press switch of the analog stick. | _not defined_ |
@@ -127,11 +127,10 @@ The Pimoroni Trackball module is a I2C based breakout board with an RGB enable t
| Setting | Description | Default |
|-------------------------------------|------------------------------------------------------------------------------------|---------|
|`PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` |
-|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `100` |
-|`PIMORONI_TRACKBALL_INTERVAL_MS` | (Optional) The update/read interval for the sensor in milliseconds. | `8` |
+|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackball in milliseconds. | `100` |
|`PIMORONI_TRACKBALL_SCALE` | (Optional) The multiplier used to generate reports from the sensor. | `5` |
|`PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` |
-|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` |
+|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` |
### PMW 3360 Sensor
@@ -171,14 +170,35 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
## Common Configuration
-| Setting | Description | Default |
-|-------------------------------|-----------------------------------------------------------------------|---------------|
-|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ |
-|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ |
-|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ |
-|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ |
-|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ |
-|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ |
+| Setting | Description | Default |
+|----------------------------------|-----------------------------------------------------------------------|-------------------|
+|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ |
+|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ |
+|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ |
+|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ |
+|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ |
+|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ |
+|`POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ |
+
+!> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and would recommend `POINTING_DEVICE_TASK_THROTTLE_MS` be set to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness.
+
+
+## Split Keyboard Configuration
+
+The following configuration options are only available when using `SPLIT_POINTING_ENABLE` see [data sync options](feature_split_keyboard.md?id=data-sync-options). The rotation and invert `*_RIGHT` options are only used with `POINTING_DEVICE_COMBINED`. If using `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` use the common configuration above to configure your pointing device.
+
+| Setting | Description | Default |
+|----------------------------------------|-----------------------------------------------------------------------|---------------|
+|`POINTING_DEVICE_LEFT` | Pointing device on the left side (Required - pick one only) | _not defined_ |
+|`POINTING_DEVICE_RIGHT` | Pointing device on the right side (Required - pick one only) | _not defined_ |
+|`POINTING_DEVICE_COMBINED` | Pointing device on both sides (Required - pick one only) | _not defined_ |
+|`POINTING_DEVICE_ROTATION_90_RIGHT` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ |
+|`POINTING_DEVICE_ROTATION_180_RIGHT` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ |
+|`POINTING_DEVICE_ROTATION_270_RIGHT` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ |
+|`POINTING_DEVICE_INVERT_X_RIGHT` | (Optional) Inverts the X axis report. | _not defined_ |
+|`POINTING_DEVICE_INVERT_Y_RIGHT` | (Optional) Inverts the Y axis report. | _not defined_ |
+
+!> If there is a `_RIGHT` configuration option or callback, the [common configuration](feature_pointing_device.md?id=common-configuration) option will work for the left. For correct left/right detection you should setup a [handedness option](feature_split_keyboard?id=setting-handedness), `EE_HANDS` is usually a good option for an existing board that doesn't do handedness by hardware.
## Callbacks and Functions
@@ -188,7 +208,7 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
| `pointing_device_init_kb(void)` | Callback to allow for keyboard level initialization. Useful for additional hardware sensors. |
| `pointing_device_init_user(void)` | Callback to allow for user level initialization. Useful for additional hardware sensors. |
| `pointing_device_task_kb(mouse_report)` | Callback that sends sensor data, so keyboard code can intercept and modify the data. Returns a mouse report. |
-| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user coe can intercept and modify the data. Returns a mouse report. |
+| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user code can intercept and modify the data. Returns a mouse report. |
| `pointing_device_handle_buttons(buttons, pressed, button)` | Callback to handle hardware button presses. Returns a `uint8_t`. |
| `pointing_device_get_cpi(void)` | Gets the current CPI/DPI setting from the sensor, if supported. |
| `pointing_device_set_cpi(uint16_t)` | Sets the CPI/DPI, if supported. |
@@ -196,6 +216,21 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {}
| `pointing_device_set_report(mouse_report)` | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function. |
| `pointing_device_send(void)` | Sends the current mouse report to the host system. Function can be replaced. |
| `has_mouse_report_changed(old, new)` | Compares the old and new `mouse_report_t` data and returns true only if it has changed. |
+| `pointing_device_adjust_by_defines(mouse_report)` | Applies rotations and invert configurations to a raw mouse report. |
+
+
+## Split Keyboard Callbacks and Functions
+
+The combined functions below are only available when using `SPLIT_POINTING_ENABLE` and `POINTING_DEVICE_COMBINED`. The 2 callbacks `pointing_device_task_combined_*` replace the single sided equivalents above. See the [combined pointing devices example](feature_pointing_device.md?id=combined-pointing-devices)
+
+| Function | Description |
+|-----------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------|
+| `pointing_device_set_shared_report(mouse_report)` | Sets the shared mouse report to the assigned `mouse_report_t` data structured passed to the function. |
+| `pointing_device_set_cpi_on_side(bool, uint16_t)` | Sets the CPI/DPI of one side, if supported. Passing `true` will set the left and `false` the right` |
+| `pointing_device_combine_reports(left_report, right_report)` | Returns a combined mouse_report of left_report and right_report (as a `mouse_report_t` data structure) |
+| `pointing_device_task_combined_kb(left_report, right_report)` | Callback, so keyboard code can intercept and modify the data. Returns a combined mouse report. |
+| `pointing_device_task_combined_user(left_report, right_report)` | Callback, so user code can intercept and modify. Returns a combined mouse report using `pointing_device_combine_reports` |
+| `pointing_device_adjust_by_defines_right(mouse_report)` | Applies right side rotations and invert configurations to a raw mouse report. |
# Manipulating Mouse Reports
@@ -242,3 +277,62 @@ case MS_SPECIAL:
```
Recall that the mouse report is set to zero (except the buttons) whenever it is sent, so the scrolling would only occur once in each case.
+
+## Split Examples
+
+The following examples make use the `SPLIT_POINTING_ENABLE` functionality and show how to manipulate the mouse report for a scrolling mode.
+
+### Single Pointing Device
+
+The following example will work with either `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` and enables scrolling mode while on a particular layer.
+
+```c
+
+static bool scrolling_mode = false;
+
+layer_state_t layer_state_set_user(layer_state_t state) {
+ switch (get_highest_layer(state)) {
+ case _RAISE: // If we're on the _RAISE layer enable scrolling mode
+ scrolling_mode = true;
+ pointing_device_set_cpi(2000);
+ break;
+ default:
+ if (scrolling_mode) { // check if we were scrolling before and set disable if so
+ scrolling_mode = false;
+ pointing_device_set_cpi(8000);
+ }
+ break;
+ }
+ return state;
+}
+
+report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) {
+ if (scrolling_mode) {
+ mouse_report.h = mouse_report.x;
+ mouse_report.v = mouse_report.y;
+ mouse_report.x = 0;
+ mouse_report.y = 0;
+ }
+ return mouse_report;
+}
+
+```
+
+### Combined Pointing Devices
+
+The following example requires `POINTING_DEVICE_COMBINED` and sets the left side pointing device to scroll only.
+
+```c
+void keyboard_post_init_user(void) {
+ pointing_device_set_cpi_on_side(true, 1000); //Set cpi on left side to a low value for slower scrolling.
+ pointing_device_set_cpi_on_side(false, 8000); //Set cpi on right side to a reasonable value for mousing.
+}
+
+report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) {
+ left_report.h = left_report.x;
+ left_report.v = left_report.y;
+ left_report.x = 0;
+ left_report.y = 0;
+ return pointing_device_combine_reports(left_report, right_report);
+}
+```
diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md
index c8ba18beeb..b51593308e 100644
--- a/docs/feature_split_keyboard.md
+++ b/docs/feature_split_keyboard.md
@@ -266,6 +266,14 @@ This enables transmitting the current OLED on/off status to the slave side of th
This enables transmitting the current ST7565 on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing.
+```c
+#define SPLIT_POINTING_ENABLE
+```
+
+This enables transmitting the pointing device status to the master side of the split keyboard. The purpose of this feature is to enable use pointing devices on the slave side.
+
+!> There is additional required configuration for `SPLIT_POINTING_ENABLE` outlined in the [pointing device documentation](feature_pointing_device.md?id=split-keyboard-configuration).
+
### Custom data sync between sides :id=custom-data-sync
QMK's split transport allows for arbitrary data transactions at both the keyboard and user levels. This is modelled on a remote procedure call, with the master invoking a function on the slave side, with the ability to send data from master to slave, process it slave side, and send data back from slave to master.
diff --git a/docs/feature_wpm.md b/docs/feature_wpm.md
index 87145c97e3..9f98ef8336 100644
--- a/docs/feature_wpm.md
+++ b/docs/feature_wpm.md
@@ -16,7 +16,7 @@ For split keyboards using soft serial, the computed WPM score will be available
| `WPM_ALLOW_COUNT_REGRESSION` | _Not defined_ | If defined allows the WPM to be decreased when hitting Delete or Backspace |
| `WPM_UNFILTERED` | _Not defined_ | If undefined (the default), WPM values will be smoothed to avoid sudden changes in value |
| `WPM_SAMPLE_SECONDS` | `5` | This defines how many seconds of typing to average, when calculating WPM |
-| `WPM_SAMPLE_PERIODS` | `50` | This defines how many sampling periods to use when calculating WPM |
+| `WPM_SAMPLE_PERIODS` | `25` | This defines how many sampling periods to use when calculating WPM |
| `WPM_LAUNCH_CONTROL` | _Not defined_ | If defined, WPM values will be calculated using partial buffers when typing begins |
'WPM_UNFILTERED' is potentially useful if you're filtering data in some other way (and also because it reduces the code required for the WPM feature), or if reducing measurement latency to a minimum is important for you.
diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md
index ccd3f8c74d..e1f1515b71 100644
--- a/docs/internals_gpio_control.md
+++ b/docs/internals_gpio_control.md
@@ -6,17 +6,19 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
The following functions provide basic control of GPIOs and are found in `platforms/<platform>/gpio.h`.
-|Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples |
-|------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------|
-| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
-| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
-| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
-| `setPinOutput(pin)` | Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
-| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
-| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
-| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
-| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` |
-| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` |
+| Function | Description | Old AVR Examples | Old ChibiOS/ARM Examples |
+|------------------------------|-----------------------------------------------------|-------------------------------------------------|--------------------------------------------------|
+| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
+| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
+| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
+| `setPinOutput(pin)` | Set pin as output (alias of `setPinOutputPushPull`) | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+| `setPinOutputPushPull(pin)` | Set pin as output, push/pull mode | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
+| `setPinOutputOpenDrain(pin)` | Set pin as output, open-drain mode | N/A (Not implemented on AVR) | `palSetLineMode(pin, PAL_MODE_OUTPUT_OPENDRAIN)` |
+| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
+| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
+| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |
+| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` |
+| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` |
## Advanced Settings :id=advanced-settings
diff --git a/docs/keycodes.md b/docs/keycodes.md
index ba06e1b8b6..2ea4fc74e2 100644
--- a/docs/keycodes.md
+++ b/docs/keycodes.md
@@ -326,6 +326,7 @@ See also: [Magic Keycodes](keycodes_magic.md)
|----------------------------------|---------|--------------------------------------------------------------------------|
|`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control |
|`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control |
+|`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap |
|`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control |
|`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control |
|`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI |
diff --git a/docs/keycodes_magic.md b/docs/keycodes_magic.md
index 7e1b1a4f62..01eb69168e 100644
--- a/docs/keycodes_magic.md
+++ b/docs/keycodes_magic.md
@@ -6,6 +6,7 @@
|----------------------------------|---------|--------------------------------------------------------------------------|
|`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control |
|`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control |
+|`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap |
|`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control |
|`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control |
|`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI |
diff --git a/drivers/bluetooth/rn42.c b/drivers/bluetooth/rn42.c
new file mode 100644
index 0000000000..2ef40bb7e0
--- /dev/null
+++ b/drivers/bluetooth/rn42.c
@@ -0,0 +1,99 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "report.h"
+#include "uart.h"
+
+#ifndef RN42_BAUD_RATE
+# define RN42_BAUD_RATE 115200
+#endif
+
+// https://cdn.sparkfun.com/datasheets/Wireless/Bluetooth/bluetooth_cr_UG-v1.0r.pdf#G7.663734
+static inline uint16_t rn42_consumer_usage_to_bitmap(uint16_t usage) {
+ switch (usage) {
+ case AC_HOME:
+ return 0x0001;
+ case AL_EMAIL:
+ return 0x0002;
+ case AC_SEARCH:
+ return 0x0004;
+ case AL_KEYBOARD_LAYOUT:
+ return 0x0008;
+ case AUDIO_VOL_UP:
+ return 0x0010;
+ case AUDIO_VOL_DOWN:
+ return 0x0020;
+ case AUDIO_MUTE:
+ return 0x0040;
+ case TRANSPORT_PLAY_PAUSE:
+ return 0x0080;
+ case TRANSPORT_NEXT_TRACK:
+ return 0x0100;
+ case TRANSPORT_PREV_TRACK:
+ return 0x0200;
+ case TRANSPORT_STOP:
+ return 0x0400;
+ case TRANSPORT_EJECT:
+ return 0x0800;
+ case TRANSPORT_FAST_FORWARD:
+ return 0x1000;
+ case TRANSPORT_REWIND:
+ return 0x2000;
+ case TRANSPORT_STOP_EJECT:
+ return 0x4000;
+ case AL_LOCAL_BROWSER:
+ return 0x8000;
+ default:
+ return 0;
+ }
+}
+
+void rn42_init(void) { uart_init(RN42_BAUD_RATE); }
+
+void rn42_send_keyboard(report_keyboard_t *report) {
+ uart_write(0xFD);
+ uart_write(0x09);
+ uart_write(0x01);
+ uart_write(report->mods);
+ uart_write(0x00);
+ for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) {
+ uart_write(report->keys[i]);
+ }
+}
+
+void rn42_send_mouse(report_mouse_t *report) {
+ uart_write(0xFD);
+ uart_write(0x00);
+ uart_write(0x03);
+ uart_write(report->buttons);
+ uart_write(report->x);
+ uart_write(report->y);
+ uart_write(report->v); // should try sending the wheel v here
+ uart_write(report->h); // should try sending the wheel h here
+ uart_write(0x00);
+}
+
+void rn42_send_consumer(uint16_t data) {
+ static uint16_t last_data = 0;
+ if (data == last_data) return;
+ last_data = data;
+ uint16_t bitmap = rn42_consumer_usage_to_bitmap(data);
+ uart_write(0xFD);
+ uart_write(0x03);
+ uart_write(0x03);
+ uart_write(bitmap & 0xFF);
+ uart_write((bitmap >> 8) & 0xFF);
+}
diff --git a/drivers/bluetooth/rn42.h b/drivers/bluetooth/rn42.h
new file mode 100644
index 0000000000..4747759111
--- /dev/null
+++ b/drivers/bluetooth/rn42.h
@@ -0,0 +1,25 @@
+/* Copyright 2021
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "report.h"
+
+void rn42_init(void);
+
+void rn42_send_keyboard(report_keyboard_t *report);
+
+void rn42_send_mouse(report_mouse_t *report);
+
+void rn42_send_consumer(uint16_t data);
diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c
index c52f991804..995c9e8614 100644
--- a/drivers/sensors/adns9800.c
+++ b/drivers/sensors/adns9800.c
@@ -77,7 +77,9 @@
#define MSB1 0x80
// clang-format on
-void adns9800_spi_start(void) { spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR); }
+void adns9800_spi_start(void) {
+ spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR);
+}
void adns9800_write(uint8_t reg_addr, uint8_t data) {
adns9800_spi_start();
@@ -154,8 +156,8 @@ void adns9800_init() {
}
config_adns9800_t adns9800_get_config(void) {
- uint8_t config_1 = adns9800_read(REG_Configuration_I);
- return (config_adns9800_t){(config_1 & 0xFF) * CPI_STEP};
+ uint8_t cpival = adns9800_read(REG_Configuration_I);
+ return (config_adns9800_t){(cpival & 0xFF) * CPI_STEP};
}
void adns9800_set_config(config_adns9800_t config) {
@@ -164,8 +166,8 @@ void adns9800_set_config(config_adns9800_t config) {
}
uint16_t adns9800_get_cpi(void) {
- uint8_t config_1 = adns9800_read(REG_Configuration_I);
- return (uint16_t){(config_1 & 0xFF) * CPI_STEP};
+ uint8_t cpival = adns9800_read(REG_Configuration_I);
+ return (uint16_t)(cpival & 0xFF) * CPI_STEP;
}
void adns9800_set_cpi(uint16_t cpi) {
@@ -184,7 +186,7 @@ static int16_t convertDeltaToInt(uint8_t high, uint8_t low) {
}
report_adns9800_t adns9800_get_report(void) {
- report_adns9800_t report = {0, 0};
+ report_adns9800_t report = {0};
adns9800_spi_start();
diff --git a/drivers/sensors/pimoroni_trackball.c b/drivers/sensors/pimoroni_trackball.c
index 7d390056ea..2867e763bc 100644
--- a/drivers/sensors/pimoroni_trackball.c
+++ b/drivers/sensors/pimoroni_trackball.c
@@ -33,8 +33,24 @@
static uint16_t precision = 128;
-float pimoroni_trackball_get_precision(void) { return ((float)precision / 128); }
-void pimoroni_trackball_set_precision(float floatprecision) { precision = (floatprecision * 128); }
+uint16_t pimoroni_trackball_get_cpi(void) { return (precision * 125); }
+/**
+ * @brief Sets the scaling value for pimoroni trackball
+ *
+ * Sets a scaling value for pimoroni trackball to allow runtime adjustment. This isn't used by the sensor and is an
+ * approximation so the functions are consistent across drivers.
+ *
+ * NOTE: This rounds down to the nearest number divisable by 125 that's a positive integer, values below 125 are clamped to 125.
+ *
+ * @param cpi uint16_t
+ */
+void pimoroni_trackball_set_cpi(uint16_t cpi) {
+ if (cpi < 249) {
+ precision = 1;
+ } else {
+ precision = (cpi - (cpi % 125)) / 125;
+ }
+}
void pimoroni_trackball_set_rgbw(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
uint8_t data[4] = {r, g, b, w};
@@ -60,7 +76,7 @@ i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data) {
return status;
}
-__attribute__((weak)) void pimironi_trackball_device_init(void) {
+__attribute__((weak)) void pimoroni_trackball_device_init(void) {
i2c_init();
pimoroni_trackball_set_rgbw(0x00, 0x00, 0x00, 0x00);
}
diff --git a/drivers/sensors/pimoroni_trackball.h b/drivers/sensors/pimoroni_trackball.h
index 59ee8724ba..e20ee748a7 100644
--- a/drivers/sensors/pimoroni_trackball.h
+++ b/drivers/sensors/pimoroni_trackball.h
@@ -23,9 +23,6 @@
#ifndef PIMORONI_TRACKBALL_ADDRESS
# define PIMORONI_TRACKBALL_ADDRESS 0x0A
#endif
-#ifndef PIMORONI_TRACKBALL_INTERVAL_MS
-# define PIMORONI_TRACKBALL_INTERVAL_MS 8
-#endif
#ifndef PIMORONI_TRACKBALL_SCALE
# define PIMORONI_TRACKBALL_SCALE 5
#endif
@@ -52,10 +49,10 @@ typedef struct {
uint8_t click;
} pimoroni_data_t;
-void pimironi_trackball_device_init(void);
+void pimoroni_trackball_device_init(void);
void pimoroni_trackball_set_rgbw(uint8_t red, uint8_t green, uint8_t blue, uint8_t white);
int16_t pimoroni_trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_t scale);
void pimoroni_trackball_adapt_values(int8_t* mouse, int16_t* offset);
-float pimoroni_trackball_get_precision(void);
-void pimoroni_trackball_set_precision(float precision);
+uint16_t pimoroni_trackball_get_cpi(void);
+void pimoroni_trackball_set_cpi(uint16_t cpi);
i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data);
diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c
index 50d1c35801..4854ba5f47 100644
--- a/drivers/sensors/pmw3360.c
+++ b/drivers/sensors/pmw3360.c
@@ -16,6 +16,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include "spi_master.h"
#include "pmw3360.h"
#include "wait.h"
#include "debug.h"
@@ -24,55 +25,57 @@
// Registers
// clang-format off
-#define REG_Product_ID 0x00
-#define REG_Revision_ID 0x01
-#define REG_Motion 0x02
-#define REG_Delta_X_L 0x03
-#define REG_Delta_X_H 0x04
-#define REG_Delta_Y_L 0x05
-#define REG_Delta_Y_H 0x06
-#define REG_SQUAL 0x07
-#define REG_Raw_Data_Sum 0x08
-#define REG_Maximum_Raw_data 0x09
-#define REG_Minimum_Raw_data 0x0A
-#define REG_Shutter_Lower 0x0B
-#define REG_Shutter_Upper 0x0C
-#define REG_Control 0x0D
-#define REG_Config1 0x0F
-#define REG_Config2 0x10
-#define REG_Angle_Tune 0x11
-#define REG_Frame_Capture 0x12
-#define REG_SROM_Enable 0x13
-#define REG_Run_Downshift 0x14
-#define REG_Rest1_Rate_Lower 0x15
-#define REG_Rest1_Rate_Upper 0x16
-#define REG_Rest1_Downshift 0x17
-#define REG_Rest2_Rate_Lower 0x18
-#define REG_Rest2_Rate_Upper 0x19
-#define REG_Rest2_Downshift 0x1A
-#define REG_Rest3_Rate_Lower 0x1B
-#define REG_Rest3_Rate_Upper 0x1C
-#define REG_Observation 0x24
-#define REG_Data_Out_Lower 0x25
-#define REG_Data_Out_Upper 0x26
-#define REG_Raw_Data_Dump 0x29
-#define REG_SROM_ID 0x2A
-#define REG_Min_SQ_Run 0x2B
-#define REG_Raw_Data_Threshold 0x2C
-#define REG_Config5 0x2F
-#define REG_Power_Up_Reset 0x3A
-#define REG_Shutdown 0x3B
-#define REG_Inverse_Product_ID 0x3F
-#define REG_LiftCutoff_Tune3 0x41
-#define REG_Angle_Snap 0x42
-#define REG_LiftCutoff_Tune1 0x4A
-#define REG_Motion_Burst 0x50
-#define REG_LiftCutoff_Tune_Timeout 0x58
-#define REG_LiftCutoff_Tune_Min_Length 0x5A
-#define REG_SROM_Load_Burst 0x62
-#define REG_Lift_Config 0x63
-#define REG_Raw_Data_Burst 0x64
-#define REG_LiftCutoff_Tune2 0x65
+#define REG_Product_ID 0x00
+#define REG_Revision_ID 0x01
+#define REG_Motion 0x02
+#define REG_Delta_X_L 0x03
+#define REG_Delta_X_H 0x04
+#define REG_Delta_Y_L 0x05
+#define REG_Delta_Y_H 0x06
+#define REG_SQUAL 0x07
+#define REG_Raw_Data_Sum 0x08
+#define REG_Maximum_Raw_data 0x09
+#define REG_Minimum_Raw_data 0x0a
+#define REG_Shutter_Lower 0x0b
+#define REG_Shutter_Upper 0x0c
+#define REG_Control 0x0d
+#define REG_Config1 0x0f
+#define REG_Config2 0x10
+#define REG_Angle_Tune 0x11
+#define REG_Frame_Capture 0x12
+#define REG_SROM_Enable 0x13
+#define REG_Run_Downshift 0x14
+#define REG_Rest1_Rate_Lower 0x15
+#define REG_Rest1_Rate_Upper 0x16
+#define REG_Rest1_Downshift 0x17
+#define REG_Rest2_Rate_Lower 0x18
+#define REG_Rest2_Rate_Upper 0x19
+#define REG_Rest2_Downshift 0x1a
+#define REG_Rest3_Rate_Lower 0x1b
+#define REG_Rest3_Rate_Upper 0x1c
+#define REG_Observation 0x24
+#define REG_Data_Out_Lower 0x25
+#define REG_Data_Out_Upper 0x26
+#define REG_Raw_Data_Dump 0x29
+#define REG_SROM_ID 0x2a
+#define REG_Min_SQ_Run 0x2b
+#define REG_Raw_Data_Threshold 0x2c
+#define REG_Config5 0x2f
+#define REG_Power_Up_Reset 0x3a
+#define REG_Shutdown 0x3b
+#define REG_Inverse_Product_ID 0x3f
+#define REG_LiftCutoff_Tune3 0x41
+#define REG_Angle_Snap 0x42
+#define REG_LiftCutoff_Tune1 0x4a
+#define REG_Motion_Burst 0x50
+#define REG_LiftCutoff_Tune_Timeout 0x58
+#define REG_LiftCutoff_Tune_Min_Length 0x5a
+#define REG_SROM_Load_Burst 0x62
+#define REG_Lift_Config 0x63
+#define REG_Raw_Data_Burst 0x64
+#define REG_LiftCutoff_Tune2 0x65
+
+#define CPI_STEP 100
// clang-format on
#ifndef MAX_CPI
@@ -86,41 +89,36 @@ void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1'
#endif
#define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)))
-bool spi_start_adv(void) {
+bool pmw3360_spi_start(void) {
bool status = spi_start(PMW3360_CS_PIN, PMW3360_SPI_LSBFIRST, PMW3360_SPI_MODE, PMW3360_SPI_DIVISOR);
wait_us(1);
return status;
}
-void spi_stop_adv(void) {
- wait_us(1);
- spi_stop();
-}
+spi_status_t pmw3360_write(uint8_t reg_addr, uint8_t data) {
+ pmw3360_spi_start();
-spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data) {
if (reg_addr != REG_Motion_Burst) {
_inBurst = false;
}
- spi_start_adv();
// send address of the register, with MSBit = 1 to indicate it's a write
spi_status_t status = spi_write(reg_addr | 0x80);
status = spi_write(data);
// tSCLK-NCS for write operation
- wait_us(20);
+ wait_us(35);
- // tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound
- wait_us(100);
+ // tSWW/tSWR (=180us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound
+ wait_us(145);
spi_stop();
return status;
}
-uint8_t spi_read_adv(uint8_t reg_addr) {
- spi_start_adv();
+uint8_t pmw3360_read(uint8_t reg_addr) {
+ pmw3360_spi_start();
// send adress of the register, with MSBit = 0 to indicate it's a read
spi_write(reg_addr & 0x7f);
-
uint8_t data = spi_read();
// tSCLK-NCS for read operation is 120ns
@@ -133,19 +131,6 @@ uint8_t spi_read_adv(uint8_t reg_addr) {
return data;
}
-void pmw3360_set_cpi(uint16_t cpi) {
- uint8_t cpival = constrain((cpi / 100) - 1, 0, MAX_CPI);
-
- spi_start_adv();
- spi_write_adv(REG_Config1, cpival);
- spi_stop();
-}
-
-uint16_t pmw3360_get_cpi(void) {
- uint8_t cpival = spi_read_adv(REG_Config1);
- return (uint16_t)((cpival + 1) & 0xFF) * 100;
-}
-
bool pmw3360_init(void) {
setPinOutput(PMW3360_CS_PIN);
@@ -153,42 +138,51 @@ bool pmw3360_init(void) {
_inBurst = false;
spi_stop();
- spi_start_adv();
+ pmw3360_spi_start();
spi_stop();
- spi_write_adv(REG_Shutdown, 0xb6); // Shutdown first
+ pmw3360_write(REG_Shutdown, 0xb6); // Shutdown first
wait_ms(300);
- spi_start_adv();
+ pmw3360_spi_start();
wait_us(40);
- spi_stop_adv();
+ spi_stop();
wait_us(40);
- spi_write_adv(REG_Power_Up_Reset, 0x5a);
+ // reboot
+ pmw3360_write(REG_Power_Up_Reset, 0x5a);
wait_ms(50);
- spi_read_adv(REG_Motion);
- spi_read_adv(REG_Delta_X_L);
- spi_read_adv(REG_Delta_X_H);
- spi_read_adv(REG_Delta_Y_L);
- spi_read_adv(REG_Delta_Y_H);
+ // read registers and discard
+ pmw3360_read(REG_Motion);
+ pmw3360_read(REG_Delta_X_L);
+ pmw3360_read(REG_Delta_X_H);
+ pmw3360_read(REG_Delta_Y_L);
+ pmw3360_read(REG_Delta_Y_H);
pmw3360_upload_firmware();
- spi_stop_adv();
+ spi_stop();
wait_ms(10);
pmw3360_set_cpi(PMW3360_CPI);
wait_ms(1);
- spi_write_adv(REG_Config2, 0x00);
+ pmw3360_write(REG_Config2, 0x00);
- spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -30, 30));
+ pmw3360_write(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -127, 127));
- spi_write_adv(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE);
+ pmw3360_write(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE);
bool init_success = pmw3360_check_signature();
+#ifdef CONSOLE_ENABLE
+ if (init_success) {
+ dprintf("pmw3360 signature verified");
+ } else {
+ dprintf("pmw3360 signature verification failed!");
+ }
+#endif
writePinLow(PMW3360_CS_PIN);
@@ -196,13 +190,13 @@ bool pmw3360_init(void) {
}
void pmw3360_upload_firmware(void) {
- spi_write_adv(REG_SROM_Enable, 0x1d);
+ pmw3360_write(REG_SROM_Enable, 0x1d);
wait_ms(10);
- spi_write_adv(REG_SROM_Enable, 0x18);
+ pmw3360_write(REG_SROM_Enable, 0x18);
- spi_start_adv();
+ pmw3360_spi_start();
spi_write(REG_SROM_Load_Burst | 0x80);
wait_us(15);
@@ -214,68 +208,72 @@ void pmw3360_upload_firmware(void) {
}
wait_us(200);
- spi_read_adv(REG_SROM_ID);
-
- spi_write_adv(REG_Config2, 0x00);
-
- spi_stop();
- wait_ms(10);
+ pmw3360_read(REG_SROM_ID);
+ pmw3360_write(REG_Config2, 0x00);
}
bool pmw3360_check_signature(void) {
- uint8_t pid = spi_read_adv(REG_Product_ID);
- uint8_t iv_pid = spi_read_adv(REG_Inverse_Product_ID);
- uint8_t SROM_ver = spi_read_adv(REG_SROM_ID);
+ uint8_t pid = pmw3360_read(REG_Product_ID);
+ uint8_t iv_pid = pmw3360_read(REG_Inverse_Product_ID);
+ uint8_t SROM_ver = pmw3360_read(REG_SROM_ID);
return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04
}
+uint16_t pmw3360_get_cpi(void) {
+ uint8_t cpival = pmw3360_read(REG_Config1);
+ return (uint16_t)((cpival + 1) & 0xFF) * CPI_STEP;
+}
+
+void pmw3360_set_cpi(uint16_t cpi) {
+ uint8_t cpival = constrain((cpi / CPI_STEP) - 1, 0, MAX_CPI);
+ pmw3360_write(REG_Config1, cpival);
+}
+
report_pmw3360_t pmw3360_read_burst(void) {
+ report_pmw3360_t report = {0};
+
if (!_inBurst) {
#ifdef CONSOLE_ENABLE
dprintf("burst on");
#endif
- spi_write_adv(REG_Motion_Burst, 0x00);
+ pmw3360_write(REG_Motion_Burst, 0x00);
_inBurst = true;
}
- spi_start_adv();
+ pmw3360_spi_start();
spi_write(REG_Motion_Burst);
wait_us(35); // waits for tSRAD
- report_pmw3360_t data = {0};
-
- data.motion = spi_read();
+ report.motion = spi_read();
spi_write(0x00); // skip Observation
- data.dx = spi_read();
- data.mdx = spi_read();
- data.dy = spi_read();
- data.mdy = spi_read();
+ report.dx = spi_read();
+ report.mdx = spi_read();
+ report.dy = spi_read();
+ report.mdy = spi_read();
spi_stop();
#ifdef CONSOLE_ENABLE
if (debug_mouse) {
- print_byte(data.motion);
- print_byte(data.dx);
- print_byte(data.mdx);
- print_byte(data.dy);
- print_byte(data.mdy);
+ print_byte(report.motion);
+ print_byte(report.dx);
+ print_byte(report.mdx);
+ print_byte(report.dy);
+ print_byte(report.mdy);
dprintf("\n");
}
#endif
- data.isMotion = (data.motion & 0x80) != 0;
- data.isOnSurface = (data.motion & 0x08) == 0;
- data.dx |= (data.mdx << 8);
- data.dx = data.dx * -1;
- data.dy |= (data.mdy << 8);
- data.dy = data.dy * -1;
-
- spi_stop();
+ report.isMotion = (report.motion & 0x80) != 0;
+ report.isOnSurface = (report.motion & 0x08) == 0;
+ report.dx |= (report.mdx << 8);
+ report.dx = report.dx * -1;
+ report.dy |= (report.mdy << 8);
+ report.dy = report.dy * -1;
- if (data.motion & 0b111) { // panic recovery, sometimes burst mode works weird.
+ if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird.
_inBurst = false;
}
- return data;
+ return report;
}
diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h
index 9aa8e13f8e..df0c10d643 100644
--- a/drivers/sensors/pmw3360.h
+++ b/drivers/sensors/pmw3360.h
@@ -19,8 +19,6 @@
#pragma once
#include <stdint.h>
-#include "report.h"
-#include "spi_master.h"
#ifndef PMW3360_CPI
# define PMW3360_CPI 1600
@@ -69,10 +67,6 @@ This should work for the 3390 and 3391 too, in theory.
# define PMW3360_FIRMWARE_H "pmw3360_firmware.h"
#endif
-#ifdef CONSOLE_ENABLE
-void print_byte(uint8_t byte);
-#endif
-
typedef struct {
int8_t motion;
bool isMotion; // True if a motion is detected.
@@ -83,16 +77,10 @@ typedef struct {
int8_t mdy;
} report_pmw3360_t;
-bool spi_start_adv(void);
-void spi_stop_adv(void);
-spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data);
-uint8_t spi_read_adv(uint8_t reg_addr);
bool pmw3360_init(void);
-void pmw3360_set_cpi(uint16_t cpi);
-uint16_t pmw3360_get_cpi(void);
void pmw3360_upload_firmware(void);
bool pmw3360_check_signature(void);
+uint16_t pmw3360_get_cpi(void);
+void pmw3360_set_cpi(uint16_t cpi);
+/* Reads and clears the current delta values on the sensor */
report_pmw3360_t pmw3360_read_burst(void);
-
-#define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0)
-#define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI)
diff --git a/keyboards/40percentclub/ut47/keymaps/default/keymap.c b/keyboards/40percentclub/ut47/keymaps/default/keymap.c
index 0fa7838dfd..4eb2c190c1 100644
--- a/keyboards/40percentclub/ut47/keymaps/default/keymap.c
+++ b/keyboards/40percentclub/ut47/keymaps/default/keymap.c
@@ -15,7 +15,7 @@
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
#define LT3_TAB LT(3, KC_TAB)
@@ -108,11 +108,11 @@ LAYOUT( /* Tab */
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
- serial_send(101);
+ uart_write(0x65);
}
void led_toggle(void) {
- serial_send(100);
+ uart_write(0x64);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c
index 0c1c2e7599..8a0ba7b391 100644
--- a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c
+++ b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c
@@ -15,7 +15,7 @@
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
#define LT3_TAB LT(3, KC_TAB)
@@ -108,11 +108,11 @@ LAYOUT( /* Tab */
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
- serial_send(101);
+ uart_write(0x65);
}
void led_toggle(void) {
- serial_send(100);
+ uart_write(0x64);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c
index 52372e2857..5e79cdb9a4 100644
--- a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c
+++ b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c
@@ -15,7 +15,7 @@
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
@@ -151,11 +151,11 @@ LAYOUT( /* GAMING, toggled on and off - L5 */
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
- serial_send(101);
+ uart_write(0x65);
}
void led_toggle(void) {
- serial_send(100);
+ uart_write(0x64);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c
index ae8ad3e378..75dba3a2d4 100644
--- a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c
+++ b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c
@@ -15,7 +15,7 @@
*/
#include QMK_KEYBOARD_H
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
#endif
#define LT3_TAB LT(3, KC_TAB)
@@ -60,11 +60,11 @@ LAYOUT( /* Tab */
//LED keymap functions
#ifdef LED_ENABLE
void led_chmode(void) {
- serial_send(101);
+ uart_write(0x65);
}
void led_toggle(void) {
- serial_send(100);
+ uart_write(0x64);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
diff --git a/keyboards/40percentclub/ut47/matrix.c b/keyboards/40percentclub/ut47/matrix.c
index e47c7f8e13..89537592c5 100644
--- a/keyboards/40percentclub/ut47/matrix.c
+++ b/keyboards/40percentclub/ut47/matrix.c
@@ -26,10 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "debug.h"
#include "util.h"
#include "matrix.h"
-#ifdef LED_ENABLE
- #include "protocol/serial.h"
-#endif
-
#ifndef DEBOUNCE
# define DEBOUNCE 5
@@ -69,10 +65,6 @@ void matrix_init(void)
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
-
-#ifdef LED_ENABLE
- serial_init();
-#endif
}
uint8_t matrix_scan(void)
@@ -104,12 +96,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk
index 29cee474ff..6c9805e0fc 100644
--- a/keyboards/40percentclub/ut47/rules.mk
+++ b/keyboards/40percentclub/ut47/rules.mk
@@ -18,4 +18,5 @@ AUDIO_ENABLE = no # Audio output
# custom matrix setup
CUSTOM_MATRIX = yes
-SRC += matrix.c protocol/serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/40percentclub/ut47/ut47.c b/keyboards/40percentclub/ut47/ut47.c
index 9054335e5a..864edaeb57 100644
--- a/keyboards/40percentclub/ut47/ut47.c
+++ b/keyboards/40percentclub/ut47/ut47.c
@@ -15,7 +15,11 @@
*/
#include "ut47.h"
#ifdef LED_ENABLE
- #include "protocol/serial.h"
+ #include "uart.h"
+
+void matrix_init_kb() {
+ uart_init(9600);
+}
#endif
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
@@ -23,7 +27,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// runs for every action, just before processing by the firmware
if (record->event.pressed) {
#ifdef LED_ENABLE
- serial_send((record->event.key.row*16)+record->event.key.col);
+ uart_write((record->event.key.row*16)+record->event.key.col);
#endif
}
return process_record_user(keycode, record);
diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h
index 9ad384c8ff..0e4f4c3baf 100644
--- a/keyboards/ai03/orbit/config.h
+++ b/keyboards/ai03/orbit/config.h
@@ -44,13 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 }
#define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 }
#define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 }
-
-#define SPLIT_HAND_PIN D5
-
-//#define USE_I2C
-
-#define SELECT_SOFT_SERIAL_SPEED 1
-
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
@@ -60,6 +53,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define SELECT_SOFT_SERIAL_SPEED 1
+
+#define SPLIT_LED_STATE_ENABLE
+#define SPLIT_LAYER_STATE_ENABLE
+
+#define SPLIT_HAND_PIN D5
#define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
diff --git a/keyboards/ai03/orbit/keymaps/default/keymap.c b/keyboards/ai03/orbit/keymaps/default/keymap.c
index fa383d7c00..c9696ccde6 100644
--- a/keyboards/ai03/orbit/keymaps/default/keymap.c
+++ b/keyboards/ai03/orbit/keymaps/default/keymap.c
@@ -48,25 +48,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case MANUAL:
- if (record->event.pressed)
- {
- // Keypress
+ if (record->event.pressed) {
SEND_STRING("https://kb.ai03.me/redir/orbit");
- }
- else
- {
- // Key release
}
break;
case DBLZERO:
- if (record->event.pressed)
- {
- // Keypress
+ if (record->event.pressed) {
SEND_STRING("00");
- }
- else
- {
- // Key release
}
break;
}
diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c
deleted file mode 100644
index b8e3296686..0000000000
--- a/keyboards/ai03/orbit/matrix.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include "wait.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "config.h"
-#include "split_flags.h"
-#include "quantum.h"
-#include "debounce.h"
-#include "transport.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-//#define ROWS_PER_HAND (MATRIX_ROWS / 2)
-
-#ifdef DIRECT_PINS
-static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
-#else
-static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t raw_matrix[ROWS_PER_HAND];
-
-// row offsets for each hand
-uint8_t thisHand, thatHand;
-
-// user-defined overridable functions
-
-__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
-
-__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
-
-__attribute__((weak)) void matrix_init_user(void) {}
-
-__attribute__((weak)) void matrix_scan_user(void) {}
-
-__attribute__((weak)) void matrix_slave_scan_user(void) {}
-
-// helper functions
-
-inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
-
-inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
-
-bool matrix_is_modified(void) {
- if (debounce_active()) return false;
- return true;
-}
-
-inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
-
-inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
-
-void matrix_print(void) {
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row);
- print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void) {
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
-}
-
-// matrix code
-
-#ifdef DIRECT_PINS
-
-static void init_pins(void) {
- for (int row = 0; row < MATRIX_ROWS; row++) {
- for (int col = 0; col < MATRIX_COLS; col++) {
- pin_t pin = direct_pins[row][col];
- if (pin != NO_PIN) {
- setPinInputHigh(pin);
- }
- }
- }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
- matrix_row_t last_row_value = current_matrix[current_row];
- current_matrix[current_row] = 0;
-
- for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
- pin_t pin = direct_pins[current_row][col_index];
- if (pin != NO_PIN) {
- current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
- }
- }
-
- return (last_row_value != current_matrix[current_row]);
-}
-
-#elif (DIODE_DIRECTION == COL2ROW)
-
-static void select_row(uint8_t row) {
- setPinOutput(row_pins[row]);
- writePinLow(row_pins[row]);
-}
-
-static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); }
-
-static void unselect_rows(void) {
- for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
- setPinInputHigh(row_pins[x]);
- }
-}
-
-static void init_pins(void) {
- unselect_rows();
- for (uint8_t x = 0; x < MATRIX_COLS; x++) {
- setPinInputHigh(col_pins[x]);
- }
-}
-
-static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
- // Store last value of row prior to reading
- matrix_row_t last_row_value = current_matrix[current_row];
-
- // Clear data in matrix row
- current_matrix[current_row] = 0;
-
- // Select row and wait for row selecton to stabilize
- select_row(current_row);
- wait_us(30);
-
- // For each col...
- for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
- // Populate the matrix row with the state of the col pin
- current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index);
- }
-
- // Unselect row
- unselect_row(current_row);
-
- return (last_row_value != current_matrix[current_row]);
-}
-
-#elif (DIODE_DIRECTION == ROW2COL)
-
-static void select_col(uint8_t col) {
- setPinOutput(col_pins[col]);
- writePinLow(col_pins[col]);
-}
-
-static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); }
-
-static void unselect_cols(void) {
- for (uint8_t x = 0; x < MATRIX_COLS; x++) {
- setPinInputHigh(col_pins[x]);
- }
-}
-
-static void init_pins(void) {
- unselect_cols();
- for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
- setPinInputHigh(row_pins[x]);
- }
-}
-
-static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
- bool matrix_changed = false;
-
- // Select col and wait for col selecton to stabilize
- select_col(current_col);
- wait_us(30);
-
- // For each row...
- for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) {
- // Store last value of row prior to reading
- matrix_row_t last_row_value = current_matrix[row_index];
-
- // Check row pin state
- if (readPin(row_pins[row_index])) {
- // Pin HI, clear col bit
- current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
- } else {
- // Pin LO, set col bit
- current_matrix[row_index] |= (ROW_SHIFTER << current_col);
- }
-
- // Determine if the matrix changed state
- if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
- matrix_changed = true;
- }
- }
-
- // Unselect col
- unselect_col(current_col);
-
- return matrix_changed;
-}
-
-#endif
-
-void matrix_init(void) {
- debug_enable = true;
- debug_matrix = true;
- debug_mouse = true;
-
- // Set pinout for right half if pinout for that half is defined
- if (!isLeftHand) {
-#ifdef MATRIX_ROW_PINS_RIGHT
- const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- row_pins[i] = row_pins_right[i];
- }
-#endif
-#ifdef MATRIX_COL_PINS_RIGHT
- const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
- for (uint8_t i = 0; i < MATRIX_COLS; i++) {
- col_pins[i] = col_pins_right[i];
- }
-#endif
- }
-
- thisHand = isLeftHand ? 0 : (ROWS_PER_HAND);
- thatHand = ROWS_PER_HAND - thisHand;
-
- // initialize key pins
- init_pins();
-
- // initialize matrix state: all keys off
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- }
-
- debounce_init(ROWS_PER_HAND);
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void) {
- bool changed = false;
-
-#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
- // Set row, read cols
- for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
- changed |= read_cols_on_row(raw_matrix, current_row);
- }
-#elif (DIODE_DIRECTION == ROW2COL)
- // Set col, read rows
- for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
- changed |= read_rows_on_col(raw_matrix, current_col);
- }
-#endif
-
- debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
-
- return 1;
-}
-
-uint8_t matrix_scan(void) {
- uint8_t ret = _matrix_scan();
-
- if (is_keyboard_master()) {
- static uint8_t error_count;
-
- if (!transport_master(matrix + thatHand)) {
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[thatHand + i] = 0;
- }
- }
- } else {
- error_count = 0;
- }
-
- matrix_scan_quantum();
- } else {
- transport_slave(matrix + thisHand);
- matrix_slave_scan_user();
- }
-
- return ret;
-}
diff --git a/keyboards/ai03/orbit/orbit.c b/keyboards/ai03/orbit/orbit.c
index 97553e318a..5097f9cd90 100644
--- a/keyboards/ai03/orbit/orbit.c
+++ b/keyboards/ai03/orbit/orbit.c
@@ -15,196 +15,124 @@
*/
#include "orbit.h"
#include "split_util.h"
-#include "transport.h"
+void led_init_ports(void) {
+ // Initialize indicator LEDs to output
+ if (isLeftHand) {
+ setPinOutput(C6);
+ setPinOutput(B6);
+ setPinOutput(B5);
+ } else {
+ setPinOutput(F6);
+ setPinOutput(F7);
+ setPinOutput(C7);
+ }
+
+ set_layer_indicators(0);
+}
// Call led_toggle to set LEDs easily
// LED IDs:
-//
+//
// (LEFT) 0 1 2 | 3 4 5 (RIGHT)
-
-void led_toggle(int id, bool on) {
-
- if (isLeftHand) {
- switch(id) {
- case 0:
- // Left hand C6
- if (on)
- //PORTC |= (1<<6);
- writePinHigh(C6);
- else
- //PORTC &= ~(1<<6);
- writePinLow(C6);
- break;
- case 1:
- // Left hand B6
- if (on)
- //PORTB |= (1<<6);
- writePinHigh(B6);
- else
- //PORTB &= ~(1<<6);
- writePinLow(B6);
- break;
- case 2:
- // Left hand B5
- if (on)
- //PORTB |= (1<<5);
- writePinHigh(B5);
- else
- //PORTB &= ~(1<<5);
- writePinLow(B5);
- break;
- default:
- break;
- }
- } else {
- switch(id) {
- case 3:
- // Right hand F6
- if (on)
- //PORTF |= (1<<6);
- writePinHigh(F6);
- else
- //PORTF &= ~(1<<6);
- writePinLow(F6);
- break;
- case 4:
- // Right hand F7
- if (on)
- //PORTF |= (1<<7);
- writePinHigh(F7);
- else
- //PORTF &= ~(1<<7);
- writePinLow(F7);
- break;
- case 5:
- // Right hand C7
- if (on)
- //PORTC |= (1<<7);
- writePinHigh(C7);
- else
- //PORTC &= ~(1<<7);
- writePinLow(C7);
- break;
- default:
- break;
- }
- }
+void led_toggle(uint8_t id, bool on) {
+ if (isLeftHand) {
+ switch (id) {
+ case 0:
+ // Left hand C6
+ writePin(C6, on);
+ break;
+ case 1:
+ // Left hand B6
+ writePin(B6, on);
+ break;
+ case 2:
+ // Left hand B5
+ writePin(B5, on);
+ break;
+ default:
+ break;
+ }
+ } else {
+ switch (id) {
+ case 3:
+ // Right hand F6
+ writePin(F6, on);
+ break;
+ case 4:
+ // Right hand F7
+ writePin(F7, on);
+ break;
+ case 5:
+ // Right hand C7
+ writePin(C7, on);
+ break;
+ default:
+ break;
+ }
+ }
}
// Set all LEDs at once using an array of 6 booleans
// LED IDs:
-//
+//
// (LEFT) 0 1 2 | 3 4 5 (RIGHT)
-//
+//
// Ex. set_all_leds({ false, false, false, true, true, true }) would turn off left hand, turn on right hand
void set_all_leds(bool leds[6]) {
- for (int i = 0; i < 6; i++) {
- led_toggle(i, leds[i]);
- }
+ for (int i = 0; i < 6; i++) {
+ led_toggle(i, leds[i]);
+ }
}
void set_layer_indicators(uint8_t layer) {
-
- switch (layer)
- {
- case 0:
- led_toggle(0, true);
- led_toggle(1, false);
- led_toggle(2, false);
- break;
- case 1:
- led_toggle(0, true);
- led_toggle(1, true);
- led_toggle(2, false);
- break;
- case 2:
- led_toggle(0, true);
- led_toggle(1, true);
- led_toggle(2, true);
- break;
- case 3:
- led_toggle(0, false);
- led_toggle(1, true);
- led_toggle(2, true);
- break;
- case 4:
- led_toggle(0, false);
- led_toggle(1, false);
- led_toggle(2, true);
- break;
- default:
- led_toggle(0, true);
- led_toggle(1, false);
- led_toggle(2, true);
- break;
- }
-
+ switch (layer) {
+ case 0:
+ led_toggle(0, true);
+ led_toggle(1, false);
+ led_toggle(2, false);
+ break;
+ case 1:
+ led_toggle(0, true);
+ led_toggle(1, true);
+ led_toggle(2, false);
+ break;
+ case 2:
+ led_toggle(0, true);
+ led_toggle(1, true);
+ led_toggle(2, true);
+ break;
+ case 3:
+ led_toggle(0, false);
+ led_toggle(1, true);
+ led_toggle(2, true);
+ break;
+ case 4:
+ led_toggle(0, false);
+ led_toggle(1, false);
+ led_toggle(2, true);
+ break;
+ default:
+ led_toggle(0, true);
+ led_toggle(1, false);
+ led_toggle(2, true);
+ break;
+ }
}
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- // Initialize indicator LEDs to output
- if (isLeftHand)
- {
- setPinOutput(C6);
- setPinOutput(B6);
- setPinOutput(B5);
- //DDRC |= (1<<6);
- //DDRB |= (1<<6);
- //DDRB |= (1<<5);
- }
- else
- {
- setPinOutput(F6);
- setPinOutput(F7);
- setPinOutput(C7);
- //DDRF |= (1<<6);
- //DDRF |= (1<<7);
- //DDRC |= (1<<7);
- }
-
- set_layer_indicators(0);
-
- matrix_init_user();
+bool led_update_kb(led_t led_state) {
+ bool res = led_update_user(led_state);
+ if (res) {
+ led_toggle(3, led_state.num_lock);
+ led_toggle(4, led_state.caps_lock);
+ led_toggle(5, led_state.scroll_lock);
+ }
+ return res;
}
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- if (is_keyboard_master()) {
-
- serial_m2s_buffer.nlock_led = IS_LED_ON(usb_led, USB_LED_NUM_LOCK);
- serial_m2s_buffer.clock_led = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK);
- serial_m2s_buffer.slock_led = IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK);
-
- led_toggle(3, IS_LED_ON(usb_led, USB_LED_NUM_LOCK));
- led_toggle(4, IS_LED_ON(usb_led, USB_LED_CAPS_LOCK));
- led_toggle(5, IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK));
-
- }
-
- led_set_user(usb_led);
-}
+layer_state_t layer_state_set_kb(layer_state_t state) {
+ set_layer_indicators(get_highest_layer(state));
-uint32_t layer_state_set_kb(uint32_t state) {
-
- if (is_keyboard_master())
- {
- serial_m2s_buffer.current_layer = biton32(state);
-
- // If left half, do the LED toggle thing
- if (isLeftHand)
- {
- set_layer_indicators(biton32(state));
- }
-
- }
- // NOTE: Do not set slave LEDs here.
- // This is not called on slave
-
- return layer_state_set_user(state);
+ return layer_state_set_user(state);
}
diff --git a/keyboards/ai03/orbit/orbit.h b/keyboards/ai03/orbit/orbit.h
index 39f1ebb0e3..7f3b1aca32 100644
--- a/keyboards/ai03/orbit/orbit.h
+++ b/keyboards/ai03/orbit/orbit.h
@@ -18,6 +18,8 @@
#include "quantum.h"
+#define XXX KC_NO
+
/* This a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
@@ -26,17 +28,6 @@
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
-
-#ifdef USE_I2C
-#include <stddef.h>
-#ifdef __AVR__
- #include <avr/io.h>
- #include <avr/interrupt.h>
-#endif
-#endif
-
-#define XXX KC_NO
-
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
@@ -56,6 +47,6 @@
{ R40, R41, R42, R43, R44, R45, XXX } \
}
-extern void led_toggle(int id, bool on);
+void led_toggle(uint8_t id, bool on);
void set_all_leds(bool leds[6]);
-extern void set_layer_indicators(uint8_t layer);
+void set_layer_indicators(uint8_t layer);
diff --git a/keyboards/ai03/orbit/readme.md b/keyboards/ai03/orbit/readme.md
index 58ba2079d5..0c320929b6 100644
--- a/keyboards/ai03/orbit/readme.md
+++ b/keyboards/ai03/orbit/readme.md
@@ -4,9 +4,9 @@
A split ergonomic keyboard project.
-Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
-Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit)
-Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed.
+* Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
+* Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit)
+* Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed.
Make example for this keyboard (after setting up your build environment):
diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk
index f98e2382f1..a0f1ab94a9 100644
--- a/keyboards/ai03/orbit/rules.mk
+++ b/keyboards/ai03/orbit/rules.mk
@@ -16,12 +16,4 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-USE_I2C = no # I2C for split communication
-CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c)
-# SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files
-
-SRC += split_util.c \
- split_flags.c \
- serial.c \
- transport.c \
- matrix.c
+SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files
diff --git a/keyboards/ai03/orbit/serial.c b/keyboards/ai03/orbit/serial.c
deleted file mode 100644
index 636dfa0906..0000000000
--- a/keyboards/ai03/orbit/serial.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- *
- * 2018-10-28 checked
- * avr-gcc 4.9.2
- * avr-gcc 5.4.0
- * avr-gcc 7.3.0
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stddef.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifdef SOFT_SERIAL_PIN
-
-#ifdef __AVR_ATmega32U4__
- // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
- #ifdef USE_AVR_I2C
- #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
- #error Using ATmega32U4 I2C, so can not use PD0, PD1
- #endif
- #endif
-
- #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
- #define SERIAL_PIN_DDR DDRD
- #define SERIAL_PIN_PORT PORTD
- #define SERIAL_PIN_INPUT PIND
- #if SOFT_SERIAL_PIN == D0
- #define SERIAL_PIN_MASK _BV(PD0)
- #define EIMSK_BIT _BV(INT0)
- #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
- #define SERIAL_PIN_INTERRUPT INT0_vect
- #elif SOFT_SERIAL_PIN == D1
- #define SERIAL_PIN_MASK _BV(PD1)
- #define EIMSK_BIT _BV(INT1)
- #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
- #define SERIAL_PIN_INTERRUPT INT1_vect
- #elif SOFT_SERIAL_PIN == D2
- #define SERIAL_PIN_MASK _BV(PD2)
- #define EIMSK_BIT _BV(INT2)
- #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
- #define SERIAL_PIN_INTERRUPT INT2_vect
- #elif SOFT_SERIAL_PIN == D3
- #define SERIAL_PIN_MASK _BV(PD3)
- #define EIMSK_BIT _BV(INT3)
- #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
- #define SERIAL_PIN_INTERRUPT INT3_vect
- #endif
- #elif SOFT_SERIAL_PIN == E6
- #define SERIAL_PIN_DDR DDRE
- #define SERIAL_PIN_PORT PORTE
- #define SERIAL_PIN_INPUT PINE
- #define SERIAL_PIN_MASK _BV(PE6)
- #define EIMSK_BIT _BV(INT6)
- #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
- #define SERIAL_PIN_INTERRUPT INT6_vect
- #else
- #error invalid SOFT_SERIAL_PIN value
- #endif
-
-#else
- #error serial.c now support ATmega32U4 only
-#endif
-
-#define ALWAYS_INLINE __attribute__((always_inline))
-#define NO_INLINE __attribute__((noinline))
-#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
-
-// parity check
-#define ODD_PARITY 1
-#define EVEN_PARITY 0
-#define PARITY EVEN_PARITY
-
-#ifdef SERIAL_DELAY
- // custom setup in config.h
- // #define TID_SEND_ADJUST 2
- // #define SERIAL_DELAY 6 // micro sec
- // #define READ_WRITE_START_ADJUST 30 // cycles
- // #define READ_WRITE_WIDTH_ADJUST 8 // cycles
-#else
-// ============ Standard setups ============
-
-#ifndef SELECT_SOFT_SERIAL_SPEED
-#define SELECT_SOFT_SERIAL_SPEED 1
-// 0: about 189kbps (Experimental only)
-// 1: about 137kbps (default)
-// 2: about 75kbps
-// 3: about 39kbps
-// 4: about 26kbps
-// 5: about 20kbps
-#endif
-
-#if __GNUC__ < 6
- #define TID_SEND_ADJUST 14
-#else
- #define TID_SEND_ADJUST 2
-#endif
-
-#if SELECT_SOFT_SERIAL_SPEED == 0
- // Very High speed
- #define SERIAL_DELAY 4 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 34 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 1
- // High speed
- #define SERIAL_DELAY 6 // micro sec
- #if __GNUC__ < 6
- #define READ_WRITE_START_ADJUST 30 // cycles
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_START_ADJUST 33 // cycles
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 2
- // Middle speed
- #define SERIAL_DELAY 12 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 3
- // Low speed
- #define SERIAL_DELAY 24 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 4
- // Very Low speed
- #define SERIAL_DELAY 36 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#elif SELECT_SOFT_SERIAL_SPEED == 5
- // Ultra Low speed
- #define SERIAL_DELAY 48 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #if __GNUC__ < 6
- #define READ_WRITE_WIDTH_ADJUST 3 // cycles
- #else
- #define READ_WRITE_WIDTH_ADJUST 7 // cycles
- #endif
-#else
-#error invalid SELECT_SOFT_SERIAL_SPEED value
-#endif /* SELECT_SOFT_SERIAL_SPEED */
-#endif /* SERIAL_DELAY */
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH_US 1
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-#else
- #define SLAVE_INT_ACK_WIDTH_UNIT 2
- #define SLAVE_INT_ACK_WIDTH 4
-#endif
-
-static SSTD_t *Transaction_table = NULL;
-static uint8_t Transaction_table_size = 0;
-
-inline static void serial_delay(void) ALWAYS_INLINE;
-inline static
-void serial_delay(void) {
- _delay_us(SERIAL_DELAY);
-}
-
-inline static void serial_delay_half1(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half1(void) {
- _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static void serial_delay_half2(void) ALWAYS_INLINE;
-inline static
-void serial_delay_half2(void) {
- _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static void serial_output(void) ALWAYS_INLINE;
-inline static
-void serial_output(void) {
- SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
-inline static
-void serial_input_with_pullup(void) {
- SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
-inline static
-uint8_t serial_read_pin(void) {
- return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static void serial_low(void) ALWAYS_INLINE;
-inline static
-void serial_low(void) {
- SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static void serial_high(void) ALWAYS_INLINE;
-inline static
-void serial_high(void) {
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_output();
- serial_high();
-}
-
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
-{
- Transaction_table = sstd_table;
- Transaction_table_size = (uint8_t)sstd_table_size;
- serial_input_with_pullup();
-
- // Enable INT0-INT3,INT6
- EIMSK |= EIMSK_BIT;
-#if SERIAL_PIN_MASK == _BV(PE6)
- // Trigger on falling edge of INT6
- EICRB &= EICRx_BIT;
-#else
- // Trigger on falling edge of INT0-INT3
- EICRA &= EICRx_BIT;
-#endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static void sync_recv(void) NO_INLINE;
-static
-void sync_recv(void) {
- for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
- }
- // This shouldn't hang if the target disconnects because the
- // serial line will float to high if the target does disconnect.
- while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static void sync_send(void) NO_INLINE;
-static
-void sync_send(void) {
- serial_low();
- serial_delay();
- serial_high();
-}
-
-// Reads a byte from the serial line
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
-static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
- uint8_t byte, i, p, pb;
-
- _delay_sub_us(READ_WRITE_START_ADJUST);
- for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
- serial_delay_half1(); // read the middle of pulses
- if( serial_read_pin() ) {
- byte = (byte << 1) | 1; p ^= 1;
- } else {
- byte = (byte << 1) | 0; p ^= 0;
- }
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
- }
- /* recive parity bit */
- serial_delay_half1(); // read the middle of pulses
- pb = serial_read_pin();
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
-
- *pterrcount += (p != pb)? 1 : 0;
-
- return byte;
-}
-
-// Sends a byte with MSB ordering
-void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
-void serial_write_chunk(uint8_t data, uint8_t bit) {
- uint8_t b, p;
- for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
- if(data & b) {
- serial_high(); p ^= 1;
- } else {
- serial_low(); p ^= 0;
- }
- serial_delay();
- }
- /* send parity bit */
- if(p & 1) { serial_high(); }
- else { serial_low(); }
- serial_delay();
-
- serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-void serial_send_packet(uint8_t *buffer, uint8_t size) {
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- data = buffer[i];
- sync_send();
- serial_write_chunk(data,8);
- }
-}
-
-static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
-static
-uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
- uint8_t pecount = 0;
- for (uint8_t i = 0; i < size; ++i) {
- uint8_t data;
- sync_recv();
- data = serial_read_chunk(&pecount, 8);
- buffer[i] = data;
- }
- return pecount == 0;
-}
-
-inline static
-void change_sender2reciver(void) {
- sync_send(); //0
- serial_delay_half1(); //1
- serial_low(); //2
- serial_input_with_pullup(); //2
- serial_delay_half1(); //3
-}
-
-inline static
-void change_reciver2sender(void) {
- sync_recv(); //0
- serial_delay(); //1
- serial_low(); //3
- serial_output(); //3
- serial_delay_half1(); //4
-}
-
-static inline uint8_t nibble_bits_count(uint8_t bits)
-{
- bits = (bits & 0x5) + (bits >> 1 & 0x5);
- bits = (bits & 0x3) + (bits >> 2 & 0x3);
- return bits;
-}
-
-// interrupt handle to be used by the target device
-ISR(SERIAL_PIN_INTERRUPT) {
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- serial_low();
- serial_output();
- SSTD_t *trans = Transaction_table;
-#else
- // recive transaction table index
- uint8_t tid, bits;
- uint8_t pecount = 0;
- sync_recv();
- bits = serial_read_chunk(&pecount,7);
- tid = bits>>3;
- bits = (bits&7) != nibble_bits_count(tid);
- if( bits || pecount> 0 || tid > Transaction_table_size ) {
- return;
- }
- serial_delay_half1();
-
- serial_high(); // response step1 low->high
- serial_output();
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
- SSTD_t *trans = &Transaction_table[tid];
- serial_low(); // response step2 ack high->low
-#endif
-
- // target send phase
- if( trans->target2initiator_buffer_size > 0 )
- serial_send_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size);
- // target switch to input
- change_sender2reciver();
-
- // target recive phase
- if( trans->initiator2target_buffer_size > 0 ) {
- if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size) ) {
- *trans->status = TRANSACTION_ACCEPTED;
- } else {
- *trans->status = TRANSACTION_DATA_ERROR;
- }
- } else {
- *trans->status = TRANSACTION_ACCEPTED;
- }
-
- sync_recv(); //weit initiator output to high
-}
-
-/////////
-// start transaction by initiator
-//
-// int soft_serial_transaction(int sstd_index)
-//
-// Returns:
-// TRANSACTION_END
-// TRANSACTION_NO_RESPONSE
-// TRANSACTION_DATA_ERROR
-// this code is very time dependent, so we need to disable interrupts
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void) {
- SSTD_t *trans = Transaction_table;
-#else
-int soft_serial_transaction(int sstd_index) {
- if( sstd_index > Transaction_table_size )
- return TRANSACTION_TYPE_ERROR;
- SSTD_t *trans = &Transaction_table[sstd_index];
-#endif
- cli();
-
- // signal to the target that we want to start a transaction
- serial_output();
- serial_low();
- _delay_us(SLAVE_INT_WIDTH_US);
-
-#ifndef SERIAL_USE_MULTI_TRANSACTION
- // wait for the target response
- serial_input_with_pullup();
- _delay_us(SLAVE_INT_RESPONSE_TIME);
-
- // check if the target is present
- if (serial_read_pin()) {
- // target failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
-
-#else
- // send transaction table index
- int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
- sync_send();
- _delay_sub_us(TID_SEND_ADJUST);
- serial_write_chunk(tid, 7);
- serial_delay_half1();
-
- // wait for the target response (step1 low->high)
- serial_input_with_pullup();
- while( !serial_read_pin() ) {
- _delay_sub_us(2);
- }
-
- // check if the target is present (step2 high->low)
- for( int i = 0; serial_read_pin(); i++ ) {
- if (i > SLAVE_INT_ACK_WIDTH + 1) {
- // slave failed to pull the line low, assume not present
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_NO_RESPONSE;
- sei();
- return TRANSACTION_NO_RESPONSE;
- }
- _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
- }
-#endif
-
- // initiator recive phase
- // if the target is present syncronize with it
- if( trans->target2initiator_buffer_size > 0 ) {
- if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
- trans->target2initiator_buffer_size) ) {
- serial_output();
- serial_high();
- *trans->status = TRANSACTION_DATA_ERROR;
- sei();
- return TRANSACTION_DATA_ERROR;
- }
- }
-
- // initiator switch to output
- change_reciver2sender();
-
- // initiator send phase
- if( trans->initiator2target_buffer_size > 0 ) {
- serial_send_packet((uint8_t *)trans->initiator2target_buffer,
- trans->initiator2target_buffer_size);
- }
-
- // always, release the line when not in use
- sync_send();
-
- *trans->status = TRANSACTION_END;
- sei();
- return TRANSACTION_END;
-}
-
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index) {
- SSTD_t *trans = &Transaction_table[sstd_index];
- cli();
- int retval = *trans->status;
- *trans->status = 0;;
- sei();
- return retval;
-}
-#endif
-
-#endif
-
-// Helix serial.c history
-// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
-// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
-// (adjusted with avr-gcc 4.9.2)
-// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
-// (adjusted with avr-gcc 7.3.0)
-// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
-// (adjusted with avr-gcc 5.4.0, 7.3.0)
-// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669)
diff --git a/keyboards/ai03/orbit/serial.h b/keyboards/ai03/orbit/serial.h
deleted file mode 100644
index 1c1e640069..0000000000
--- a/keyboards/ai03/orbit/serial.h
+++ /dev/null
@@ -1,62 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-
-// /////////////////////////////////////////////////////////////////
-// Need Soft Serial defines in config.h
-// /////////////////////////////////////////////////////////////////
-// ex.
-// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
-// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
-// // 1: about 137kbps (default)
-// // 2: about 75kbps
-// // 3: about 39kbps
-// // 4: about 26kbps
-// // 5: about 20kbps
-//
-// //// USE simple API (using signle-type transaction function)
-// /* nothing */
-// //// USE flexible API (using multi-type transaction function)
-// #define SERIAL_USE_MULTI_TRANSACTION
-//
-// /////////////////////////////////////////////////////////////////
-
-// Soft Serial Transaction Descriptor
-typedef struct _SSTD_t {
- uint8_t *status;
- uint8_t initiator2target_buffer_size;
- uint8_t *initiator2target_buffer;
- uint8_t target2initiator_buffer_size;
- uint8_t *target2initiator_buffer;
-} SSTD_t;
-#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
-
-// initiator is transaction start side
-void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
-// target is interrupt accept side
-void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
-
-// initiator resullt
-#define TRANSACTION_END 0
-#define TRANSACTION_NO_RESPONSE 0x1
-#define TRANSACTION_DATA_ERROR 0x2
-#define TRANSACTION_TYPE_ERROR 0x4
-#ifndef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_transaction(void);
-#else
-int soft_serial_transaction(int sstd_index);
-#endif
-
-// target status
-// *SSTD_t.status has
-// initiator:
-// TRANSACTION_END
-// or TRANSACTION_NO_RESPONSE
-// or TRANSACTION_DATA_ERROR
-// target:
-// TRANSACTION_DATA_ERROR
-// or TRANSACTION_ACCEPTED
-#define TRANSACTION_ACCEPTED 0x8
-#ifdef SERIAL_USE_MULTI_TRANSACTION
-int soft_serial_get_and_clean_status(int sstd_index);
-#endif
diff --git a/keyboards/ai03/orbit/split_flags.c b/keyboards/ai03/orbit/split_flags.c
deleted file mode 100644
index 1f5825d650..0000000000
--- a/keyboards/ai03/orbit/split_flags.c
+++ /dev/null
@@ -1,5 +0,0 @@
-#include "split_flags.h"
-
-volatile bool RGB_DIRTY = false;
-
-volatile bool BACKLIT_DIRTY = false; \ No newline at end of file
diff --git a/keyboards/ai03/orbit/split_flags.h b/keyboards/ai03/orbit/split_flags.h
deleted file mode 100644
index aaac474a7d..0000000000
--- a/keyboards/ai03/orbit/split_flags.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include <stdint.h>
-
-/**
-* Global Flags
-**/
-
-//RGB Stuff
-extern volatile bool RGB_DIRTY;
-
-
-//Backlight Stuff
-extern volatile bool BACKLIT_DIRTY;
diff --git a/keyboards/ai03/orbit/split_util.c b/keyboards/ai03/orbit/split_util.c
deleted file mode 100644
index 2352e5a111..0000000000
--- a/keyboards/ai03/orbit/split_util.c
+++ /dev/null
@@ -1,87 +0,0 @@
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "config.h"
-#include "timer.h"
-#include "split_flags.h"
-#include "transport.h"
-#include "quantum.h"
-
-#ifdef EE_HANDS
-# include "eeprom.h"
-# include "eeconfig.h"
-#endif
-
-volatile bool isLeftHand = true;
-
-__attribute__((weak))
-bool is_keyboard_left(void) {
- #ifdef SPLIT_HAND_PIN
- // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
- setPinInput(SPLIT_HAND_PIN);
- return readPin(SPLIT_HAND_PIN);
- #else
- #ifdef EE_HANDS
- return eeprom_read_byte(EECONFIG_HANDEDNESS);
- #else
- #ifdef MASTER_RIGHT
- return !is_keyboard_master();
- #else
- return is_keyboard_master();
- #endif
- #endif
- #endif
-}
-
-bool is_keyboard_master(void)
-{
-#ifdef __AVR__
- static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
-
- // only check once, as this is called often
- if (usbstate == UNKNOWN)
- {
- USBCON |= (1 << OTGPADE); // enables VBUS pad
- wait_us(5);
-
- usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS
- }
-
- return (usbstate == MASTER);
-#else
- return true;
-#endif
-}
-
-static void keyboard_master_setup(void) {
-#if defined(USE_I2C)
- #ifdef SSD1306OLED
- matrix_master_OLED_init ();
- #endif
-#endif
- transport_master_init();
-
- // For master the Backlight info needs to be sent on startup
- // Otherwise the salve won't start with the proper info until an update
- BACKLIT_DIRTY = true;
-}
-
-static void keyboard_slave_setup(void)
-{
- transport_slave_init();
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void)
-{
- isLeftHand = is_keyboard_left();
-
- if (is_keyboard_master())
- {
- keyboard_master_setup();
- }
- else
- {
- keyboard_slave_setup();
- }
-}
diff --git a/keyboards/ai03/orbit/split_util.h b/keyboards/ai03/orbit/split_util.h
deleted file mode 100644
index 20f7535bf4..0000000000
--- a/keyboards/ai03/orbit/split_util.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-extern volatile bool isLeftHand;
-
-void matrix_master_OLED_init (void);
diff --git a/keyboards/ai03/orbit/transport.c b/keyboards/ai03/orbit/transport.c
deleted file mode 100644
index 447fafed14..0000000000
--- a/keyboards/ai03/orbit/transport.c
+++ /dev/null
@@ -1,238 +0,0 @@
-
-#include "transport.h"
-
-#include "config.h"
-#include "matrix.h"
-#include "quantum.h"
-
-#include "orbit.h"
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-#ifdef RGBLIGHT_ENABLE
-# include "rgblight.h"
-#endif
-
-#ifdef BACKLIGHT_ENABLE
-# include "backlight.h"
- extern backlight_config_t backlight_config;
-#endif
-
-#if defined(USE_I2C)
-
-#include "i2c.h"
-
-#ifndef SLAVE_I2C_ADDRESS
-# define SLAVE_I2C_ADDRESS 0x32
-#endif
-
-#if (MATRIX_COLS > 8)
-# error "Currently only supports 8 COLS"
-#endif
-
-// Get rows from other half over i2c
-bool transport_master(matrix_row_t matrix[]) {
- int err = 0;
-
- // write backlight info
-#ifdef BACKLIGHT_ENABLE
- if (BACKLIT_DIRTY) {
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) { goto i2c_error; }
-
- // Backlight location
- err = i2c_master_write(I2C_BACKLIT_START);
- if (err) { goto i2c_error; }
-
- // Write backlight
- i2c_master_write(get_backlight_level());
-
- BACKLIT_DIRTY = false;
- }
-#endif
-
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) { goto i2c_error; }
-
- // start of matrix stored at I2C_KEYMAP_START
- err = i2c_master_write(I2C_KEYMAP_START);
- if (err) { goto i2c_error; }
-
- // Start read
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
- if (err) { goto i2c_error; }
-
- if (!err) {
- int i;
- for (i = 0; i < ROWS_PER_HAND-1; ++i) {
- matrix[i] = i2c_master_read(I2C_ACK);
- }
- matrix[i] = i2c_master_read(I2C_NACK);
- i2c_master_stop();
- } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
- i2c_reset_state();
- return false;
- }
-
-#ifdef RGBLIGHT_ENABLE
- if (RGB_DIRTY) {
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) { goto i2c_error; }
-
- // RGB Location
- err = i2c_master_write(I2C_RGB_START);
- if (err) { goto i2c_error; }
-
- uint32_t dword = eeconfig_read_rgblight();
-
- // Write RGB
- err = i2c_master_write_data(&dword, 4);
- if (err) { goto i2c_error; }
-
- RGB_DIRTY = false;
- i2c_master_stop();
- }
-#endif
-
- return true;
-}
-
-void transport_slave(matrix_row_t matrix[]) {
-
- for (int i = 0; i < ROWS_PER_HAND; ++i)
- {
- i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i];
- }
- // Read Backlight Info
- #ifdef BACKLIGHT_ENABLE
- if (BACKLIT_DIRTY)
- {
- backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
- BACKLIT_DIRTY = false;
- }
- #endif
- #ifdef RGBLIGHT_ENABLE
- if (RGB_DIRTY)
- {
- // Disable interupts (RGB data is big)
- cli();
- // Create new DWORD for RGB data
- uint32_t dword;
-
- // Fill the new DWORD with the data that was sent over
- uint8_t * dword_dat = (uint8_t *)(&dword);
- for (int i = 0; i < 4; i++)
- {
- dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i];
- }
-
- // Update the RGB now with the new data and set RGB_DIRTY to false
- rgblight_update_dword(dword);
- RGB_DIRTY = false;
- // Re-enable interupts now that RGB is set
- sei();
- }
- #endif
-}
-
-void transport_master_init(void) {
- i2c_master_init();
-}
-
-void transport_slave_init(void) {
- i2c_slave_init(SLAVE_I2C_ADDRESS);
-}
-
-#else // USE_SERIAL
-
-#include "serial.h"
-
-
-
-volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
-volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
-uint8_t volatile status0 = 0;
-
-SSTD_t transactions[] = {
- { (uint8_t *)&status0,
- sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
- sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
- }
-};
-
-uint8_t slave_layer_cache;
-uint8_t slave_nlock_cache;
-uint8_t slave_clock_cache;
-uint8_t slave_slock_cache;
-
-void transport_master_init(void)
-{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
-
-void transport_slave_init(void)
-{
- soft_serial_target_init(transactions, TID_LIMIT(transactions));
- slave_layer_cache = 255;
- slave_nlock_cache = 255;
- slave_clock_cache = 255;
- slave_slock_cache = 255;
-}
-
-bool transport_master(matrix_row_t matrix[]) {
-
- if (soft_serial_transaction()) {
- return false;
- }
-
- // TODO: if MATRIX_COLS > 8 change to unpack()
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[i] = serial_s2m_buffer.smatrix[i];
- }
-
- #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
- // Code to send RGB over serial goes here (not implemented yet)
- #endif
-
- #ifdef BACKLIGHT_ENABLE
- // Write backlight level for slave to read
- serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
- #endif
-
- return true;
-}
-
-void transport_slave(matrix_row_t matrix[]) {
-
- // TODO: if MATRIX_COLS > 8 change to pack()
- for (int i = 0; i < ROWS_PER_HAND; ++i)
- {
- serial_s2m_buffer.smatrix[i] = matrix[i];
- }
- #ifdef BACKLIGHT_ENABLE
- backlight_set(serial_m2s_buffer.backlight_level);
- #endif
- #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
- // Add serial implementation for RGB here
- #endif
-
- if (slave_layer_cache != serial_m2s_buffer.current_layer) {
- slave_layer_cache = serial_m2s_buffer.current_layer;
- set_layer_indicators(slave_layer_cache);
- }
-
- if (slave_nlock_cache != serial_m2s_buffer.nlock_led) {
- slave_nlock_cache = serial_m2s_buffer.nlock_led;
- led_toggle(3, slave_nlock_cache);
- }
- if (slave_clock_cache != serial_m2s_buffer.clock_led) {
- slave_clock_cache = serial_m2s_buffer.clock_led;
- led_toggle(4, slave_clock_cache);
- }
- if (slave_slock_cache != serial_m2s_buffer.slock_led) {
- slave_slock_cache = serial_m2s_buffer.slock_led;
- led_toggle(5, slave_slock_cache);
- }
-
-}
-
-#endif
diff --git a/keyboards/ai03/orbit/transport.h b/keyboards/ai03/orbit/transport.h
deleted file mode 100644
index 757eae6f5c..0000000000
--- a/keyboards/ai03/orbit/transport.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#pragma once
-
-#include "matrix.h"
-
-#define ROWS_PER_HAND (MATRIX_ROWS/2)
-
-typedef struct _Serial_s2m_buffer_t {
- // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
- matrix_row_t smatrix[ROWS_PER_HAND];
-} Serial_s2m_buffer_t;
-
-typedef struct _Serial_m2s_buffer_t {
-#ifdef BACKLIGHT_ENABLE
- uint8_t backlight_level;
-#endif
-#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
- rgblight_config_t rgblight_config; //not yet use
- //
- // When MCUs on both sides drive their respective RGB LED chains,
- // it is necessary to synchronize, so it is necessary to communicate RGB information.
- // In that case, define the RGBLIGHT_SPLIT macro.
- //
- // Otherwise, if the master side MCU drives both sides RGB LED chains,
- // there is no need to communicate.
-#endif
-
- uint8_t current_layer;
- uint8_t nlock_led;
- uint8_t clock_led;
- uint8_t slock_led;
-
-} Serial_m2s_buffer_t;
-
-extern volatile Serial_s2m_buffer_t serial_s2m_buffer;
-extern volatile Serial_m2s_buffer_t serial_m2s_buffer;
-
-void transport_master_init(void);
-void transport_slave_init(void);
-
-// returns false if valid data not received from slave
-bool transport_master(matrix_row_t matrix[]);
-void transport_slave(matrix_row_t matrix[]);
diff --git a/keyboards/amj96/matrix.c b/keyboards/amj96/matrix.c
index 8e7bbaa791..ffd66d120f 100644
--- a/keyboards/amj96/matrix.c
+++ b/keyboards/amj96/matrix.c
@@ -108,12 +108,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/angel64/alpha/matrix.c b/keyboards/angel64/alpha/matrix.c
index 474fbec030..2851859cf2 100644
--- a/keyboards/angel64/alpha/matrix.c
+++ b/keyboards/angel64/alpha/matrix.c
@@ -90,13 +90,6 @@ uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
-//Deprecated.
-bool matrix_is_modified(void)
-{
- if (debounce_active()) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/angel64/rev1/matrix.c b/keyboards/angel64/rev1/matrix.c
index 474fbec030..2851859cf2 100644
--- a/keyboards/angel64/rev1/matrix.c
+++ b/keyboards/angel64/rev1/matrix.c
@@ -90,13 +90,6 @@ uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
-//Deprecated.
-bool matrix_is_modified(void)
-{
- if (debounce_active()) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/bpiphany/kitten_paw/matrix.c b/keyboards/bpiphany/kitten_paw/matrix.c
index b59089cdf4..56114858f1 100644
--- a/keyboards/bpiphany/kitten_paw/matrix.c
+++ b/keyboards/bpiphany/kitten_paw/matrix.c
@@ -117,13 +117,6 @@ uint8_t matrix_scan(void) {
return 1;
}
-bool matrix_is_modified(void) {
- if (debouncing)
- return false;
- else
- return true;
-}
-
inline bool matrix_is_on(uint8_t row, uint8_t col) {
return (matrix[row] & ((matrix_row_t)1<<col));
}
diff --git a/keyboards/bpiphany/pegasushoof/2013/matrix.c b/keyboards/bpiphany/pegasushoof/2013/matrix.c
index 037f323c00..09244982d9 100644
--- a/keyboards/bpiphany/pegasushoof/2013/matrix.c
+++ b/keyboards/bpiphany/pegasushoof/2013/matrix.c
@@ -110,13 +110,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- if (debouncing)
- return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/centromere/config.h b/keyboards/centromere/config.h
index e502e2534b..b4cae20332 100644
--- a/keyboards/centromere/config.h
+++ b/keyboards/centromere/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 500000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/centromere/matrix.c b/keyboards/centromere/matrix.c
index 7256cd5cb5..bbd771f41b 100644
--- a/keyboards/centromere/matrix.c
+++ b/keyboards/centromere/matrix.c
@@ -15,80 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-void matrix_init(void) {
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(500000);
}
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF remote slave to send the matrix information
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates, erase the last set of data
uint8_t uart_data[11] = {0};
@@ -96,58 +37,27 @@ uint8_t matrix_scan(void)
//there are 10 bytes corresponding to 1w columns, and an end byte
for (uint8_t i = 0; i < 11; i++) {
//wait for the serial data, timeout if it's been too long
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/centromere/rules.mk b/keyboards/centromere/rules.mk
index ed777e1b9e..113e1e6aff 100644
--- a/keyboards/centromere/rules.mk
+++ b/keyboards/centromere/rules.mk
@@ -11,16 +11,19 @@ BOOTLOADER = caterina
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
-NKRO_ENABLE = yes # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-UNICODE_ENABLE = yes # Unicode
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+NKRO_ENABLE = no # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+UNICODE_ENABLE = yes
+CUSTOM_MATRIX = lite
-# # project specific files
-SRC += matrix.c serial_uart.c
+# project specific files
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
LAYOUTS = split_3x5_3 split_3x6_3
diff --git a/keyboards/chimera_ergo/config.h b/keyboards/chimera_ergo/config.h
index 0767a218b5..3c0cc5c162 100644
--- a/keyboards/chimera_ergo/config.h
+++ b/keyboards/chimera_ergo/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/chimera_ergo/matrix.c b/keyboards/chimera_ergo/matrix.c
index 577176c466..603ad0f386 100644
--- a/keyboards/chimera_ergo/matrix.c
+++ b/keyboards/chimera_ergo/matrix.c
@@ -15,89 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-__attribute__ ((weak))
-void matrix_init_quantum(void) {
- matrix_init_kb();
-}
-
-__attribute__ ((weak))
-void matrix_scan_quantum(void) {
- matrix_scan_kb();
-}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-
-void matrix_init(void) {
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[14] = {0};
@@ -107,58 +39,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/chimera_ergo/rules.mk b/keyboards/chimera_ergo/rules.mk
index a8bd3a027a..8cb1736147 100644
--- a/keyboards/chimera_ergo/rules.mk
+++ b/keyboards/chimera_ergo/rules.mk
@@ -8,13 +8,16 @@ BOOTLOADER = caterina
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+CUSTOM_MATRIX = lite
-# # project specific files
-SRC += matrix.c serial_uart.c
+# project specific files
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/chimera_ls/config.h b/keyboards/chimera_ls/config.h
index 2eb028471d..ca92e1e2e4 100644
--- a/keyboards/chimera_ls/config.h
+++ b/keyboards/chimera_ls/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/chimera_ls/matrix.c b/keyboards/chimera_ls/matrix.c
index 9edd91818f..a92c3e8431 100644
--- a/keyboards/chimera_ls/matrix.c
+++ b/keyboards/chimera_ls/matrix.c
@@ -15,93 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#elif (MATRIX_COLS <= 64)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse64(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop64(matrix[i])
-# define ROW_SHIFTER ((uint64_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-__attribute__ ((weak))
-void matrix_init_quantum(void) {
- matrix_init_kb();
-}
-
-__attribute__ ((weak))
-void matrix_scan_quantum(void) {
- matrix_scan_kb();
-}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
-void matrix_init(void) {
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -111,58 +39,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/chimera_ls/rules.mk b/keyboards/chimera_ls/rules.mk
index 377c379911..b7f6db5aa5 100644
--- a/keyboards/chimera_ls/rules.mk
+++ b/keyboards/chimera_ls/rules.mk
@@ -8,16 +8,19 @@ BOOTLOADER = caterina
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+CUSTOM_MATRIX = lite
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
LAYOUTS = ortho_4x12
diff --git a/keyboards/chimera_ortho/config.h b/keyboards/chimera_ortho/config.h
index 974502525c..3d86343a67 100644
--- a/keyboards/chimera_ortho/config.h
+++ b/keyboards/chimera_ortho/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/chimera_ortho/matrix.c b/keyboards/chimera_ortho/matrix.c
index 34930af7e2..a92c3e8431 100644
--- a/keyboards/chimera_ortho/matrix.c
+++ b/keyboards/chimera_ortho/matrix.c
@@ -15,79 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-void matrix_init(void) {
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -97,58 +39,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk
index fbe6872001..8cb1736147 100644
--- a/keyboards/chimera_ortho/rules.mk
+++ b/keyboards/chimera_ortho/rules.mk
@@ -8,13 +8,16 @@ BOOTLOADER = caterina
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+CUSTOM_MATRIX = lite
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/chimera_ortho_plus/config.h b/keyboards/chimera_ortho_plus/config.h
index 4b12796e95..ebffb85657 100644
--- a/keyboards/chimera_ortho_plus/config.h
+++ b/keyboards/chimera_ortho_plus/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/chimera_ortho_plus/matrix.c b/keyboards/chimera_ortho_plus/matrix.c
index 818e05ac98..603ad0f386 100644
--- a/keyboards/chimera_ortho_plus/matrix.c
+++ b/keyboards/chimera_ortho_plus/matrix.c
@@ -15,79 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-void matrix_init(void) {
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[14] = {0};
@@ -97,58 +39,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/chimera_ortho_plus/rules.mk b/keyboards/chimera_ortho_plus/rules.mk
index e99e79c327..0a8a31e7dd 100644
--- a/keyboards/chimera_ortho_plus/rules.mk
+++ b/keyboards/chimera_ortho_plus/rules.mk
@@ -17,7 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
UNICODE_ENABLE = yes
-CUSTOM_MATRIX = yes
+CUSTOM_MATRIX = lite
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/comet46/config.h b/keyboards/comet46/config.h
index 067dabb103..5ea40c14c5 100644
--- a/keyboards/comet46/config.h
+++ b/keyboards/comet46/config.h
@@ -62,12 +62,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL))
#define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
#define MODS_GUI_MASK (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI))
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/comet46/matrix.c b/keyboards/comet46/matrix.c
index 34930af7e2..a92c3e8431 100644
--- a/keyboards/comet46/matrix.c
+++ b/keyboards/comet46/matrix.c
@@ -15,79 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-void matrix_init(void) {
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -97,58 +39,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk
index 814622226a..e177fc6441 100644
--- a/keyboards/comet46/rules.mk
+++ b/keyboards/comet46/rules.mk
@@ -8,16 +8,18 @@ BOOTLOADER = caterina
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = no # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
+MOUSEKEY_ENABLE = no # Mouse keys
+EXTRAKEY_ENABLE = no # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+CUSTOM_MATRIX = lite
# project specific files
SRC += matrix.c \
i2c.c \
- ssd1306.c \
- serial_uart.c
+ ssd1306.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h
index 4afc654e85..35032835cd 100644
--- a/keyboards/converter/palm_usb/config.h
+++ b/keyboards/converter/palm_usb/config.h
@@ -60,58 +60,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
-
-
-/* Serial(USART) configuration
- * asynchronous, negative logic, 9600baud, no flow control
- * 1-start bit, 8-data bit, non parity, 1-stop bit
- */
-#define SERIAL_SOFT_BAUD 9600
-#define SERIAL_SOFT_PARITY_NONE
-#define SERIAL_SOFT_BIT_ORDER_LSB
-#if (HANDSPRING == 0)
- #define SERIAL_SOFT_LOGIC_NEGATIVE //RS232 logic
-#endif
-/* RXD Port */
-#define SERIAL_SOFT_RXD_ENABLE
-
-// we are using Pro micro pin 3 / D0 as serial
-#define SERIAL_SOFT_RXD_DDR DDRD
-#define SERIAL_SOFT_RXD_PORT PORTD
-#define SERIAL_SOFT_RXD_PIN PIND
-#define SERIAL_SOFT_RXD_BIT 0
-#define SERIAL_SOFT_RXD_VECT INT0_vect
-
-/* RXD Interupt */
-#define SERIAL_SOFT_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
- SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
- /* enable interrupt: INT0(rising edge) */ \
- EICRA |= ((1<<ISC01)|(1<<ISC00)); \
- EIMSK |= (1<<INT0); \
- sei(); \
-} while (0)
-#define SERIAL_SOFT_RXD_INT_ENTER()
-#define SERIAL_SOFT_RXD_INT_EXIT() do { \
- /* clear interrupt flag */ \
- EIFR = (1<<INTF0); \
-} while (0)
-#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
-
-/* TXD Port */
-#define SERIAL_SOFT_TXD_ENABLE
-#define SERIAL_SOFT_TXD_DDR DDRD
-#define SERIAL_SOFT_TXD_PORT PORTD
-#define SERIAL_SOFT_TXD_PIN PIND
-#define SERIAL_SOFT_TXD_BIT 3
-#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_INIT() do { \
- /* pin configuration: output */ \
- SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
- /* idle */ \
- SERIAL_SOFT_TXD_ON(); \
-} while (0)
-
-
diff --git a/keyboards/converter/palm_usb/matrix.c b/keyboards/converter/palm_usb/matrix.c
index 289284b616..010fd56c79 100644
--- a/keyboards/converter/palm_usb/matrix.c
+++ b/keyboards/converter/palm_usb/matrix.c
@@ -18,7 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
-#include "protocol/serial.h"
+#include "uart.h"
#include "timer.h"
@@ -58,8 +58,6 @@ static uint16_t disconnect_counter = 0;
#define COL(code) ((code & COL_MASK) )
#define KEYUP(code) ((code & KEY_MASK) >>7 )
-static bool is_modified = false;
-
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
@@ -166,7 +164,7 @@ uint8_t rts_reset(void) {
uint8_t get_serial_byte(void) {
static uint8_t code;
while(1) {
- code = serial_recv();
+ code = uart_read();
if (code) {
debug_hex(code); debug(" ");
return code;
@@ -242,7 +240,7 @@ void matrix_init(void)
debug_enable = true;
//debug_matrix =true;
- serial_init(); // arguments all #defined
+ uart_init(9600); // arguments all #defined
#if (HANDSPRING == 0)
pins_init(); // set all inputs and outputs.
@@ -292,7 +290,7 @@ void matrix_init(void)
uint8_t matrix_scan(void)
{
uint8_t code;
- code = serial_recv();
+ code = uart_read();
if (!code) {
/*
disconnect_counter ++;
@@ -354,11 +352,6 @@ uint8_t matrix_scan(void)
return code;
}
-bool matrix_is_modified(void)
-{
- return is_modified;
-}
-
inline
bool matrix_has_ghost(void)
{
diff --git a/keyboards/converter/palm_usb/post_rules.mk b/keyboards/converter/palm_usb/post_rules.mk
deleted file mode 100644
index 9c11076701..0000000000
--- a/keyboards/converter/palm_usb/post_rules.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-ifdef HARDWARE_SERIAL
- # Untested with palm_usb
- SRC += protocol/serial_uart.c
- OPT_DEFS += -DHARDWARE_SERIAL
-else
- SRC += protocol/serial_soft.c
-endif
diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk
index c5e680b883..a1d2e39b23 100644
--- a/keyboards/converter/palm_usb/rules.mk
+++ b/keyboards/converter/palm_usb/rules.mk
@@ -20,5 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
CUSTOM_MATRIX = yes
SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
DEFAULT_FOLDER = converter/palm_usb/stowaway
diff --git a/keyboards/converter/sun_usb/command_extra.c b/keyboards/converter/sun_usb/command_extra.c
index 756a9160bb..332776ab90 100644
--- a/keyboards/converter/sun_usb/command_extra.c
+++ b/keyboards/converter/sun_usb/command_extra.c
@@ -1,5 +1,5 @@
#include QMK_KEYBOARD_H
-#include "protocol/serial.h"
+#include "uart.h"
bool sun_bell = false;
bool sun_click = false;
@@ -20,41 +20,41 @@ bool command_extra(uint8_t code)
return false;
case KC_DEL:
print("Reset\n");
- serial_send(0x01);
+ uart_write(0x01);
break;
case KC_HOME:
sun_bell = !sun_bell;
if (sun_bell) {
print("Bell On\n");
- serial_send(0x02);
+ uart_write(0x02);
} else {
print("Bell Off\n");
- serial_send(0x03);
+ uart_write(0x03);
}
break;
case KC_END:
sun_click = !sun_click;
if (sun_click) {
print("Click On\n");
- serial_send(0x0A);
+ uart_write(0x0A);
} else {
print("Click Off\n");
- serial_send(0x0B);
+ uart_write(0x0B);
}
break;
case KC_PGUP:
print("LED all on\n");
- serial_send(0x0E);
- serial_send(0xFF);
+ uart_write(0x0E);
+ uart_write(0xFF);
break;
case KC_PGDOWN:
print("LED all off\n");
- serial_send(0x0E);
- serial_send(0x00);
+ uart_write(0x0E);
+ uart_write(0x00);
break;
case KC_INSERT:
print("layout\n");
- serial_send(0x0F);
+ uart_write(0x0F);
break;
default:
xprintf("Unknown extra command: %02X\n", code);
diff --git a/keyboards/converter/sun_usb/config.h b/keyboards/converter/sun_usb/config.h
index c67ae5ebae..0a4aa019f7 100644
--- a/keyboards/converter/sun_usb/config.h
+++ b/keyboards/converter/sun_usb/config.h
@@ -33,50 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
-
-
-/* Serial(USART) configuration
- * asynchronous, negative logic, 1200baud, no flow control
- * 1-start bit, 8-data bit, non parity, 1-stop bit
- */
-#define SERIAL_SOFT_BAUD 1200
-#define SERIAL_SOFT_PARITY_NONE
-#define SERIAL_SOFT_BIT_ORDER_LSB
-#define SERIAL_SOFT_LOGIC_NEGATIVE
-/* RXD Port */
-#define SERIAL_SOFT_RXD_ENABLE
-#define SERIAL_SOFT_RXD_DDR DDRD
-#define SERIAL_SOFT_RXD_PORT PORTD
-#define SERIAL_SOFT_RXD_PIN PIND
-#define SERIAL_SOFT_RXD_BIT 2
-#define SERIAL_SOFT_RXD_VECT INT2_vect
-/* RXD Interupt */
-#define SERIAL_SOFT_RXD_INIT() do { \
- /* pin configuration: input with pull-up */ \
- SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
- SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
- /* enable interrupt: INT2(rising edge) */ \
- EICRA |= ((1<<ISC21)|(1<<ISC20)); \
- EIMSK |= (1<<INT2); \
- sei(); \
-} while (0)
-#define SERIAL_SOFT_RXD_INT_ENTER()
-#define SERIAL_SOFT_RXD_INT_EXIT() do { \
- /* clear interrupt flag */ \
- EIFR = (1<<INTF2); \
-} while (0)
-#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
-/* TXD Port */
-#define SERIAL_SOFT_TXD_ENABLE
-#define SERIAL_SOFT_TXD_DDR DDRD
-#define SERIAL_SOFT_TXD_PORT PORTD
-#define SERIAL_SOFT_TXD_PIN PIND
-#define SERIAL_SOFT_TXD_BIT 3
-#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
-#define SERIAL_SOFT_TXD_INIT() do { \
- /* pin configuration: output */ \
- SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
- /* idle */ \
- SERIAL_SOFT_TXD_ON(); \
-} while (0)
diff --git a/keyboards/converter/sun_usb/led.c b/keyboards/converter/sun_usb/led.c
index a409699e92..f8d183fd48 100644
--- a/keyboards/converter/sun_usb/led.c
+++ b/keyboards/converter/sun_usb/led.c
@@ -16,7 +16,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
-#include "protocol/serial.h"
+#include "uart.h"
void led_set(uint8_t usb_led)
{
@@ -27,6 +27,6 @@ void led_set(uint8_t usb_led)
if (usb_led & (1<<USB_LED_CAPS_LOCK)) sun_led |= (1<<3);
xprintf("LED: %02X\n", usb_led);
- serial_send(0x0E);
- serial_send(sun_led);
+ uart_write(0x0E);
+ uart_write(sun_led);
}
diff --git a/keyboards/converter/sun_usb/matrix.c b/keyboards/converter/sun_usb/matrix.c
index 21f45111ec..e28d165d52 100644
--- a/keyboards/converter/sun_usb/matrix.c
+++ b/keyboards/converter/sun_usb/matrix.c
@@ -16,7 +16,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
-#include "protocol/serial.h"
+#include "uart.h"
/*
* Matrix Array usage:
@@ -38,8 +38,6 @@ static uint8_t matrix[MATRIX_ROWS];
#define ROW(code) ((code>>3)&0xF)
#define COL(code) (code&0x07)
-static bool is_modified = false;
-
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
@@ -76,7 +74,7 @@ void matrix_init(void)
/* PORTD |= (1<<6); */
debug_enable = true;
- serial_init();
+ uart_init(1200);
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00;
@@ -86,12 +84,12 @@ void matrix_init(void)
/* print("Reseting "); */
/* while (1) { */
/* print("."); */
- /* while (serial_recv()); */
- /* serial_send(0x01); */
+ /* while (uart_read()); */
+ /* uart_write(0x01); */
/* _delay_ms(500); */
- /* if (serial_recv() == 0xFF) { */
+ /* if (uart_read() == 0xFF) { */
/* _delay_ms(500); */
- /* if (serial_recv() == 0x04) */
+ /* if (uart_read() == 0x04) */
/* break; */
/* } */
/* } */
@@ -106,7 +104,7 @@ void matrix_init(void)
uint8_t matrix_scan(void)
{
uint8_t code;
- code = serial_recv();
+ code = uart_read();
if (!code) return 0;
debug_hex(code); debug(" ");
@@ -115,7 +113,7 @@ uint8_t matrix_scan(void)
case 0xFF: // reset success: FF 04
print("reset: ");
_delay_ms(500);
- code = serial_recv();
+ code = uart_read();
xprintf("%02X\n", code);
if (code == 0x04) {
// LED status
@@ -125,12 +123,12 @@ uint8_t matrix_scan(void)
case 0xFE: // layout: FE <layout>
print("layout: ");
_delay_ms(500);
- xprintf("%02X\n", serial_recv());
+ xprintf("%02X\n", uart_read());
return 0;
case 0x7E: // reset fail: 7E 01
print("reset fail: ");
_delay_ms(500);
- xprintf("%02X\n", serial_recv());
+ xprintf("%02X\n", uart_read());
return 0;
case 0x7F:
// all keys up
@@ -154,11 +152,6 @@ uint8_t matrix_scan(void)
return code;
}
-bool matrix_is_modified(void)
-{
- return is_modified;
-}
-
inline
bool matrix_has_ghost(void)
{
diff --git a/keyboards/converter/sun_usb/post_rules.mk b/keyboards/converter/sun_usb/post_rules.mk
deleted file mode 100644
index 2ea1f0a5bf..0000000000
--- a/keyboards/converter/sun_usb/post_rules.mk
+++ /dev/null
@@ -1,6 +0,0 @@
-ifdef HARDWARE_SERIAL
- SRC += protocol/serial_uart.c
- OPT_DEFS += -DHARDWARE_SERIAL
-else
- SRC += protocol/serial_soft.c
-endif
diff --git a/keyboards/converter/sun_usb/rules.mk b/keyboards/converter/sun_usb/rules.mk
index 2f2ddde1d0..d25bcc7ffa 100644
--- a/keyboards/converter/sun_usb/rules.mk
+++ b/keyboards/converter/sun_usb/rules.mk
@@ -20,5 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
CUSTOM_MATRIX = yes
SRC += matrix.c led.c
+QUANTUM_LIB_SRC += uart.c
DEFAULT_FOLDER = converter/sun_usb/type5
diff --git a/keyboards/converter/usb_usb/custom_matrix.cpp b/keyboards/converter/usb_usb/custom_matrix.cpp
index 296f7fcd02..91986f6eb9 100644
--- a/keyboards/converter/usb_usb/custom_matrix.cpp
+++ b/keyboards/converter/usb_usb/custom_matrix.cpp
@@ -192,10 +192,6 @@ extern "C"
return 1;
}
- bool matrix_is_modified(void) {
- return matrix_is_mod;
- }
-
bool matrix_is_on(uint8_t row, uint8_t col) {
uint8_t code = CODE(row, col);
diff --git a/keyboards/dc01/arrow/matrix.c b/keyboards/dc01/arrow/matrix.c
index 0102ad0fa4..b69e147914 100644
--- a/keyboards/dc01/arrow/matrix.c
+++ b/keyboards/dc01/arrow/matrix.c
@@ -205,14 +205,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c
index bf5aba8497..084978a1fd 100644
--- a/keyboards/dc01/left/matrix.c
+++ b/keyboards/dc01/left/matrix.c
@@ -230,14 +230,6 @@ if (i2c_transaction(SLAVE_I2C_ADDRESS_NUMPAD, 0x1FFFF, 11)) {
return 1;
}
-bool matrix_is_modified(void)
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/dc01/numpad/matrix.c b/keyboards/dc01/numpad/matrix.c
index 38130114eb..e8e2a1b14a 100644
--- a/keyboards/dc01/numpad/matrix.c
+++ b/keyboards/dc01/numpad/matrix.c
@@ -205,14 +205,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/dc01/right/matrix.c b/keyboards/dc01/right/matrix.c
index 544c8dc538..2509bd7d4c 100644
--- a/keyboards/dc01/right/matrix.c
+++ b/keyboards/dc01/right/matrix.c
@@ -206,14 +206,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/dichotomy/config.h b/keyboards/dichotomy/config.h
index 03e19b1388..40e7f18e6f 100644
--- a/keyboards/dichotomy/config.h
+++ b/keyboards/dichotomy/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/dichotomy/dichotomy.c b/keyboards/dichotomy/dichotomy.c
index 967d7e603c..afd52cc8b3 100755
--- a/keyboards/dichotomy/dichotomy.c
+++ b/keyboards/dichotomy/dichotomy.c
@@ -1,11 +1,13 @@
#include "dichotomy.h"
+//#include "uart.h"
+
void pointing_device_task(void){
/*report_mouse_t currentReport = {};
uint32_t timeout = 0;
//the m character requests the RF slave to send the mouse report
- SERIAL_UART_DATA = 'm';
+ uart_write('m');
//trust the external inputs completely, erase old data
uint8_t uart_data[5] = {0};
@@ -15,7 +17,7 @@ void pointing_device_task(void){
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
xprintf("\r\nTIMED OUT");
@@ -23,7 +25,7 @@ void pointing_device_task(void){
}
}
xprintf("\r\nGOT DATA for %d",i);
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, bytes 1-4 are movement and scroll
diff --git a/keyboards/dichotomy/matrix.c b/keyboards/dichotomy/matrix.c
index ed83bd452c..806b66d498 100755
--- a/keyboards/dichotomy/matrix.c
+++ b/keyboards/dichotomy/matrix.c
@@ -29,7 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "dichotomy.h"
#include "pointing_device.h"
#include "report.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -94,7 +94,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -104,7 +104,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -114,14 +114,14 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
xprintf("\r\nTime out in keyboard.");
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/dichotomy/rules.mk b/keyboards/dichotomy/rules.mk
index 2b5eb0360c..a6029e3dbf 100755
--- a/keyboards/dichotomy/rules.mk
+++ b/keyboards/dichotomy/rules.mk
@@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/dm9records/ergoinu/config.h b/keyboards/dm9records/ergoinu/config.h
index 113eaf9f76..89ea9e7903 100644
--- a/keyboards/dm9records/ergoinu/config.h
+++ b/keyboards/dm9records/ergoinu/config.h
@@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#include "config_common.h"
-#include "serial_config.h"
/* USB Device descriptor parameter
VID & PID are lisenced from microchip sublisence program, Don't use other project! */
@@ -30,11 +29,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MANUFACTURER Dm9Records
#define PRODUCT ergoinu
-#define TAPPING_FORCE_HOLD
-#define TAPPING_TERM 100
-
#define USE_SERIAL
+/* serial.c configuration for split keyboard */
+#define SOFT_SERIAL_PIN D2
+
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
@@ -49,6 +48,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_COLS 7
#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, F5, F4 }
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
diff --git a/keyboards/dm9records/ergoinu/ergoinu.c b/keyboards/dm9records/ergoinu/ergoinu.c
index c6d099a148..a01ac0a25c 100644
--- a/keyboards/dm9records/ergoinu/ergoinu.c
+++ b/keyboards/dm9records/ergoinu/ergoinu.c
@@ -1 +1,18 @@
+/*
+Copyright 2018 Takuya Urakawa<twitter:@hsgw>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
#include "ergoinu.h"
diff --git a/keyboards/dm9records/ergoinu/ergoinu.h b/keyboards/dm9records/ergoinu/ergoinu.h
index 43249a8440..c275d3fa27 100644
--- a/keyboards/dm9records/ergoinu/ergoinu.h
+++ b/keyboards/dm9records/ergoinu/ergoinu.h
@@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "quantum.h"
-#ifdef RGBLIGHT_ENABLE
-#include "ws2812.h"
-#endif
-
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
L07, L08, L09, L10, L11, L12, L13, R07, R08, R09, R10, R11, R12, R13, \
@@ -41,4 +37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ R27, R26, R25, R24, R23, R22, R21 }, \
{ KC_NO, KC_NO, R32, R31, R30, R29, R28 } \
}
-
diff --git a/keyboards/dm9records/ergoinu/keymaps/default/config.h b/keyboards/dm9records/ergoinu/keymaps/default/config.h
deleted file mode 100644
index bb266f25e7..0000000000
--- a/keyboards/dm9records/ergoinu/keymaps/default/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-Copyright 2018 Takuya Urakawa <Twitter:@hsgw>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c
index 00c5da820d..862b538829 100644
--- a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c
+++ b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c
@@ -5,14 +5,6 @@
extern rgblight_config_t rgblight_config;
#endif
-#define JA_CLON KC_QUOT // : and +
-#define JA_AT KC_LBRC // @ and `
-#define JA_HAT KC_EQL // ^ and ~
-#define JA_ENUN KC_RO // \ and _ (EN mark and UNder score)
-#define JA_ENVL KC_JYEN // \ and | (EN mark and Vertical Line)
-#define JA_LBRC KC_RBRC // [ and {
-#define JA_RBRC KC_BSLS // ] and }
-
enum LAYER_NO {
BASE = 0,
META,
@@ -24,33 +16,30 @@ enum CUSTOM_KEYCODES {
RGB_TYPE,
};
-// Fillers to make layering more clear
-#define ______ KC_TRNS
-#define XXXXXX KC_NO
-
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[BASE] = LAYOUT(
- KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS,
- KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
- KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV,
- KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
+ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS,
+ KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
+ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,
MO(META),KC_LALT, KC_LGUI, KC_ENT, KC_SPC, KC_ENT, KC_BSPC, KC_RGUI, KC_RALT, MO(META)
),
[META] = LAYOUT(
MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS,
- ______, KC_CAPS, ______, ______, ______, ______, ______, ______, ______, ______, KC_SLCK, KC_PSCR, KC_HOME, KC_END,
- ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN,
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RGHT,
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______
+ _______, KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PSCR, KC_HOME, KC_END,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
- [CONF] = LAYOUT(
- ______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX,
- RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX,
- XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX,
- XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX,
- XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX
+
+ [CONF] = LAYOUT(
+ _______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
)
};
diff --git a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk
deleted file mode 100644
index 8567c2ae2e..0000000000
--- a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = no # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-AUDIO_ENABLE = no # Audio output
-RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-
-# ergoinu configs
-DISABLE_PROMICRO_LEDs = yes
-
-# Uncomment these for debugging
-# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
-# $(info -- OPT_DEFS=$(OPT_DEFS))
-# $(info )
diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h b/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h
deleted file mode 100644
index bb266f25e7..0000000000
--- a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
-This is the c configuration file for the keymap
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-Copyright 2018 Takuya Urakawa <Twitter:@hsgw>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#pragma once
-
-#define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c
index a9a9f71f4d..32289c44db 100644
--- a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c
+++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c
@@ -24,10 +24,6 @@ enum CUSTOM_KEYCODES {
RGB_TYPE,
};
-// Fillers to make layering more clear
-#define ______ KC_TRNS
-#define XXXXXX KC_NO
-
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[BASE] = LAYOUT(
@@ -38,20 +34,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
MO(META),KC_LALT, KC_ZKHK, KC_BSPC, KC_SPC, KC_ENT, KC_BSPC, KC_MHEN, KC_KANA, MO(META)
),
-
[META] = LAYOUT(
MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS,
- ______, KC_CAPS, ______, KC_UP, ______, ______, ______, ______, ______, ______, KC_SLCK, KC_PSCR, KC_HOME, KC_END,
- ______, KC_LEFT, KC_DOWN, KC_RGHT, ______, ______, ______, ______, ______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN,
- ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RGHT,
- ______, ______, KC_RGUI, KC_DEL, KC_ENT, ______, KC_DEL, KC_HENK, KC_LGUI, ______
+ _______, KC_CAPS, _______, KC_UP, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PSCR, KC_HOME, KC_END,
+ _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT,
+ _______, _______, KC_RGUI, KC_DEL, KC_ENT, _______, KC_DEL, KC_HENK, KC_LGUI, _______
),
- [CONF] = LAYOUT(
- ______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX,
- RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX,
- XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX,
- XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX,
- XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX
+
+ [CONF] = LAYOUT(
+ _______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
+ XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX
)
};
diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk
deleted file mode 100644
index 97154be636..0000000000
--- a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = no # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-NKRO_ENABLE = no
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
-AUDIO_ENABLE = no # Audio output
-RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
-SWAP_HANDS_ENABLE = no # Enable one-hand typing
-
-# ergoinu configs
-DISABLE_PROMICRO_LEDs = yes
-
-# Uncomment these for debugging
-# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
-# $(info -- OPT_DEFS=$(OPT_DEFS))
-# $(info )
diff --git a/keyboards/dm9records/ergoinu/matrix.c b/keyboards/dm9records/ergoinu/matrix.c
deleted file mode 100644
index b1c58f88fe..0000000000
--- a/keyboards/dm9records/ergoinu/matrix.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "quantum.h"
-
-#include "serial.h"
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-uint8_t is_master = 0 ;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-static uint8_t matrix_master_scan(void);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-
-void matrix_init(void) {
- debug_enable = true;
- debug_matrix = true;
- debug_mouse = true;
- // initialize row and col
- unselect_rows();
- init_cols();
-
- setPinOutput(B0);
- setPinOutput(D5);
-
- #ifdef DISABLE_PROMICRO_LEDs
- writePinHigh(B0);
- writePinHigh(D5);
- #endif
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- is_master = has_usb();
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void) {
- // Right hand is stored after the left in the matirx so, we need to offset it
- int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i+offset] != cols) {
- matrix_debouncing[i+offset] = cols;
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- matrix[i+offset] = matrix_debouncing[i+offset];
- }
- }
- }
-
- return 1;
-}
-
-int serial_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- int ret=serial_update_buffers();
- if (ret ) {
-#ifndef DISABLE_PROMICRO_LEDs
- if(ret==2) writePinLow(B0);
-#endif
- return 1;
- }
-#ifndef DISABLE_PROMICRO_LEDs
- writePinHigh(B0);
-#endif
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = serial_slave_buffer[i];
- }
- return 0;
-}
-
-uint8_t matrix_scan(void) {
- if (is_master) {
- matrix_master_scan();
- }else{
- matrix_slave_scan();
-
- int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
-
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[offset+i] = serial_master_buffer[i];
- }
-
- matrix_scan_quantum();
- }
- return 1;
-}
-
-
-uint8_t matrix_master_scan(void) {
-
- int ret = _matrix_scan();
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- serial_master_buffer[i] = matrix[offset+i];
- }
-
- if( serial_transaction() ) {
-#ifndef DISABLE_PROMICRO_LEDs
- // turn on the indicator led when halves are disconnected
- writePinLow(D5);
-#endif
-
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = 0;
- }
- }
- } else {
-#ifndef DISABLE_PROMICRO_LEDs
- // turn off the indicator led on no error
- writePinHigh(D5);
-#endif
- error_count = 0;
- }
- matrix_scan_quantum();
- return ret;
-}
-
-void matrix_slave_scan(void) {
- _matrix_scan();
-
- int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
-
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- serial_slave_buffer[i] = matrix[offset+i];
- }
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_bin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop16(matrix[i]);
- }
- return count;
-}
-
-static void init_cols(void)
-{
- for(int x = 0; x < MATRIX_COLS; x++) {
- _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
- _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
- }
-}
-
-static matrix_row_t read_cols(void)
-{
- matrix_row_t result = 0;
- for(int x = 0; x < MATRIX_COLS; x++) {
- result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
- }
- return result;
-}
-
-static void unselect_rows(void)
-{
- for(int x = 0; x < ROWS_PER_HAND; x++) {
- _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
- _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
- }
-}
-
-static void select_row(uint8_t row)
-{
- _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
- _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
diff --git a/keyboards/dm9records/ergoinu/post_rules.mk b/keyboards/dm9records/ergoinu/post_rules.mk
deleted file mode 100644
index 02aa48104c..0000000000
--- a/keyboards/dm9records/ergoinu/post_rules.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-ifneq ($(strip $(ERGOINU)),)
- ifeq ($(findstring promicroled, $(ERGOINU)), promicroled)
- DISABLE_PROMICRO_LEDs = no
- endif
-endif
-
-ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes)
- OPT_DEFS += -DDISABLE_PROMICRO_LEDs
-endif
diff --git a/keyboards/dm9records/ergoinu/readme.md b/keyboards/dm9records/ergoinu/readme.md
index de0a1c6c97..45f91dbac2 100644
--- a/keyboards/dm9records/ergoinu/readme.md
+++ b/keyboards/dm9records/ergoinu/readme.md
@@ -1,13 +1,12 @@
-ErgoInu
-===
+# ErgoInu
![ergoinu](https://i.imgur.com/4CCM8Vl.jpg)
An (Not Portable But Small) Ergonomic Split Keyboard.
-Keyboard Maintainer: [hsgw](https://github.com/hsgw/) [twitter](https://twitter.com/hsgw)
-Hardware Supported: Pro Micro
-Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu)
+* Keyboard Maintainer: [hsgw](https://github.com/hsgw/) [twitter](https://twitter.com/hsgw)
+* Hardware Supported: Pro Micro
+* Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu)
Make example for this keyboard (after setting up your build environment):
diff --git a/keyboards/dm9records/ergoinu/rules.mk b/keyboards/dm9records/ergoinu/rules.mk
index 0a634ee794..aba3644c9e 100644
--- a/keyboards/dm9records/ergoinu/rules.mk
+++ b/keyboards/dm9records/ergoinu/rules.mk
@@ -7,20 +7,14 @@ BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = no # Mouse keys
-EXTRAKEY_ENABLE = no # Audio control and System control
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = no # Commands for debug and configuration
+COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-SUBPROJECT_rev1 = no
-USE_I2C = no # i2c is not supported
-CUSTOM_MATRIX = yes
-SRC += matrix.c serial.c split_util.c
-
-# ergoinu configs
-DISABLE_PROMICRO_LEDs = yes
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/dm9records/ergoinu/serial.c b/keyboards/dm9records/ergoinu/serial.c
deleted file mode 100644
index 5919415877..0000000000
--- a/keyboards/dm9records/ergoinu/serial.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifdef USE_SERIAL
-
-#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
-
-// Serial pulse period in microseconds.
-#define SELECT_SERIAL_SPEED 1
-#if SELECT_SERIAL_SPEED == 0
- // Very High speed
- #define SERIAL_DELAY 4 // micro sec
- #define READ_WRITE_START_ADJUST 30 // cycles
- #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#elif SELECT_SERIAL_SPEED == 1
- // High speed
- #define SERIAL_DELAY 6 // micro sec
- #define READ_WRITE_START_ADJUST 23 // cycles
- #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#elif SELECT_SERIAL_SPEED == 2
- // Middle speed
- #define SERIAL_DELAY 12 // micro sec
- #define READ_WRITE_START_ADJUST 25 // cycles
- #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#elif SELECT_SERIAL_SPEED == 3
- // Low speed
- #define SERIAL_DELAY 24 // micro sec
- #define READ_WRITE_START_ADJUST 25 // cycles
- #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#elif SELECT_SERIAL_SPEED == 4
- // Very Low speed
- #define SERIAL_DELAY 50 // micro sec
- #define READ_WRITE_START_ADJUST 25 // cycles
- #define READ_WRITE_WIDTH_ADJUST 10 // cycles
-#else
-#error Illegal Serial Speed
-#endif
-
-
-#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
-#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
-
-#define SLAVE_INT_WIDTH 1
-#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-
-#define SLAVE_DATA_CORRUPT (1<<0)
-volatile uint8_t status = 0;
-
-inline static
-void serial_delay(void) {
- _delay_us(SERIAL_DELAY);
-}
-
-inline static
-void serial_delay_half1(void) {
- _delay_us(SERIAL_DELAY_HALF1);
-}
-
-inline static
-void serial_delay_half2(void) {
- _delay_us(SERIAL_DELAY_HALF2);
-}
-
-inline static
-void serial_output(void) {
- SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static
-void serial_input_with_pullup(void) {
- SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static
-uint8_t serial_read_pin(void) {
- return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static
-void serial_low(void) {
- SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static
-void serial_high(void) {
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void serial_master_init(void) {
- serial_output();
- serial_high();
-}
-
-void serial_slave_init(void) {
- serial_input_with_pullup();
-
-#if SERIAL_PIN_MASK == _BV(PD0)
- // Enable INT0
- EIMSK |= _BV(INT0);
- // Trigger on falling edge of INT0
- EICRA &= ~(_BV(ISC00) | _BV(ISC01));
-#elif SERIAL_PIN_MASK == _BV(PD2)
- // Enable INT2
- EIMSK |= _BV(INT2);
- // Trigger on falling edge of INT2
- EICRA &= ~(_BV(ISC20) | _BV(ISC21));
-#else
- #error unknown SERIAL_PIN_MASK value
-#endif
-}
-
-// Used by the sender to synchronize timing with the reciver.
-static
-void sync_recv(void) {
- for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
- }
- // This shouldn't hang if the slave disconnects because the
- // serial line will float to high if the slave does disconnect.
- while (!serial_read_pin());
-}
-
-// Used by the reciver to send a synchronization signal to the sender.
-static
-void sync_send(void) {
- serial_low();
- serial_delay();
- serial_high();
-}
-
-// Reads a byte from the serial line
-static
-uint8_t serial_read_byte(void) {
- uint8_t byte = 0;
- _delay_sub_us(READ_WRITE_START_ADJUST);
- for ( uint8_t i = 0; i < 8; ++i) {
- serial_delay_half1(); // read the middle of pulses
- byte = (byte << 1) | serial_read_pin();
- _delay_sub_us(READ_WRITE_WIDTH_ADJUST);
- serial_delay_half2();
- }
- return byte;
-}
-
-// Sends a byte with MSB ordering
-static
-void serial_write_byte(uint8_t data) {
- uint8_t b = 1<<7;
- while( b ) {
- if(data & b) {
- serial_high();
- } else {
- serial_low();
- }
- b >>= 1;
- serial_delay();
- }
- serial_low(); // sync_send() / senc_recv() need raise edge
-}
-
-// interrupt handle to be used by the slave device
-ISR(SERIAL_PIN_INTERRUPT) {
- serial_output();
-
- // slave send phase
- uint8_t checksum = 0;
- for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
- sync_send();
- serial_write_byte(serial_slave_buffer[i]);
- checksum += serial_slave_buffer[i];
- }
- sync_send();
- serial_write_byte(checksum);
-
- // slave switch to input
- sync_send(); //0
- serial_delay_half1(); //1
- serial_low(); //2
- serial_input_with_pullup(); //2
- serial_delay_half1(); //3
-
- // slave recive phase
- uint8_t checksum_computed = 0;
- for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
- sync_recv();
- serial_master_buffer[i] = serial_read_byte();
- checksum_computed += serial_master_buffer[i];
- }
- sync_recv();
- uint8_t checksum_received = serial_read_byte();
-
- if ( checksum_computed != checksum_received ) {
- status |= SLAVE_DATA_CORRUPT;
- } else {
- status &= ~SLAVE_DATA_CORRUPT;
- }
-
- sync_recv(); //weit master output to high
-}
-
-inline
-bool serial_slave_DATA_CORRUPT(void) {
- return status & SLAVE_DATA_CORRUPT;
-}
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
-//
-// Returns:
-// 0 => no error
-// 1 => slave did not respond
-// 2 => checksum error
-int serial_update_buffers(void) {
- // this code is very time dependent, so we need to disable interrupts
- cli();
-
- // signal to the slave that we want to start a transaction
- serial_output();
- serial_low();
- _delay_us(SLAVE_INT_WIDTH);
-
- // wait for the slaves response
- serial_input_with_pullup();
- _delay_us(SLAVE_INT_RESPONSE_TIME);
-
- // check if the slave is present
- if (serial_read_pin()) {
- // slave failed to pull the line low, assume not present
- serial_output();
- serial_high();
- sei();
- return 1;
- }
-
- // master recive phase
- // if the slave is present syncronize with it
-
- uint8_t checksum_computed = 0;
- // receive data from the slave
- for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
- sync_recv();
- serial_slave_buffer[i] = serial_read_byte();
- checksum_computed += serial_slave_buffer[i];
- }
- sync_recv();
- uint8_t checksum_received = serial_read_byte();
-
- if (checksum_computed != checksum_received) {
- serial_output();
- serial_high();
- sei();
- return 2;
- }
-
- // master switch to output
- sync_recv(); //0
- serial_delay(); //1
- serial_low(); //3
- serial_output(); // 3
- serial_delay_half1(); //4
-
- // master send phase
- uint8_t checksum = 0;
-
- for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
- sync_send();
- serial_write_byte(serial_master_buffer[i]);
- checksum += serial_master_buffer[i];
- }
- sync_send();
- serial_write_byte(checksum);
-
- // always, release the line when not in use
- sync_send();
-
- sei();
- return 0;
-}
-
-#endif
diff --git a/keyboards/dm9records/ergoinu/serial.h b/keyboards/dm9records/ergoinu/serial.h
deleted file mode 100644
index 67cf06ac6b..0000000000
--- a/keyboards/dm9records/ergoinu/serial.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-
-// ////////////////////////////////////////////
-// Need Soft Serial defines in serial_config.h
-// ////////////////////////////////////////////
-// ex.
-// #define SERIAL_PIN_DDR DDRD
-// #define SERIAL_PIN_PORT PORTD
-// #define SERIAL_PIN_INPUT PIND
-// #define SERIAL_PIN_MASK _BV(PD?) ?=0,2
-// #define SERIAL_PIN_INTERRUPT INT?_vect ?=0,2
-// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-// #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
-
-// Buffers for master - slave communication
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
diff --git a/keyboards/dm9records/ergoinu/serial_config.h b/keyboards/dm9records/ergoinu/serial_config.h
deleted file mode 100644
index a16db684ca..0000000000
--- a/keyboards/dm9records/ergoinu/serial_config.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#pragma once
-
-/* Soft Serial defines */
-#define SERIAL_PIN_DDR DDRD
-#define SERIAL_PIN_PORT PORTD
-#define SERIAL_PIN_INPUT PIND
-#define SERIAL_PIN_MASK _BV(PD2)
-#define SERIAL_PIN_INTERRUPT INT2_vect
-
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
diff --git a/keyboards/dm9records/ergoinu/split_util.c b/keyboards/dm9records/ergoinu/split_util.c
deleted file mode 100644
index 0cbc2c69c4..0000000000
--- a/keyboards/dm9records/ergoinu/split_util.c
+++ /dev/null
@@ -1,56 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-
-#include "serial.h"
-
-volatile bool isLeftHand = true;
-
-static void setup_handedness(void) {
- #ifdef EE_HANDS
- isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
- #else
- // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
- #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
- isLeftHand = !has_usb();
- #else
- isLeftHand = has_usb();
- #endif
- #endif
-}
-
-static void keyboard_master_setup(void) {
- serial_master_init();
-}
-
-static void keyboard_slave_setup(void) {
- serial_slave_init();
-}
-
-bool has_usb(void) {
- USBCON |= (1 << OTGPADE); //enables VBUS pad
- _delay_us(5);
- return (USBSTA & (1<<VBUS)); //checks state of VBUS
-}
-
-void split_keyboard_setup(void) {
- setup_handedness();
-
- if (has_usb()) {
- keyboard_master_setup();
- } else {
- keyboard_slave_setup();
- }
- sei();
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
- split_keyboard_setup();
-}
diff --git a/keyboards/dm9records/ergoinu/split_util.h b/keyboards/dm9records/ergoinu/split_util.h
deleted file mode 100644
index 11cfd5455a..0000000000
--- a/keyboards/dm9records/ergoinu/split_util.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool has_usb(void);
diff --git a/keyboards/duck/jetfire/matrix.c b/keyboards/duck/jetfire/matrix.c
index 2dd94a72ac..729fa6dd14 100644
--- a/keyboards/duck/jetfire/matrix.c
+++ b/keyboards/duck/jetfire/matrix.c
@@ -116,12 +116,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h b/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h
index a7d95c51a9..d70f188178 100644
--- a/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h
+++ b/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h
@@ -21,7 +21,7 @@
#pragma once
-#define CH_CFG_ST_FREQUENCY 10000
+#define CH_CFG_ST_FREQUENCY 1000
#define CH_CFG_ST_TIMEDELTA 0
diff --git a/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h b/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h
index 6d67aa96aa..a24c1cee12 100644
--- a/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h
+++ b/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h
@@ -85,7 +85,7 @@
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
-#define STM32_GPT_USE_TIM3 FALSE
+#define STM32_GPT_USE_TIM3 TRUE
#define STM32_GPT_USE_TIM14 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
diff --git a/keyboards/durgod/dgk6x/config.h b/keyboards/durgod/dgk6x/config.h
index 92673e5c24..a15ed86650 100644
--- a/keyboards/durgod/dgk6x/config.h
+++ b/keyboards/durgod/dgk6x/config.h
@@ -22,6 +22,9 @@
#define VENDOR_ID 0xD60D
#define MANUFACTURER Hoksi Technology
+#define USB_POLLING_INTERVAL_MS 1
+#define WAIT_US_TIMER GPTD3
+
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION ROW2COL
diff --git a/keyboards/durgod/dgk6x/halconf.h b/keyboards/durgod/dgk6x/halconf.h
index 1772f8e410..9c1c6e5280 100644
--- a/keyboards/durgod/dgk6x/halconf.h
+++ b/keyboards/durgod/dgk6x/halconf.h
@@ -19,4 +19,7 @@
#ifdef RGB_MATRIX_ENABLE
#define HAL_USE_I2C TRUE
#endif
+
+#define HAL_USE_GPT TRUE
+
#include_next <halconf.h>
diff --git a/keyboards/durgod/k3x0/config.h b/keyboards/durgod/k3x0/config.h
index ef73a71016..af543bb970 100644
--- a/keyboards/durgod/k3x0/config.h
+++ b/keyboards/durgod/k3x0/config.h
@@ -23,6 +23,9 @@
#define VENDOR_ID 0xD60D
#define MANUFACTURER Hoksi Technology
+#define USB_POLLING_INTERVAL_MS 1
+#define WAIT_US_TIMER GPTD3
+
/* key matrix size (rows in specific keyboard variant) */
#define MATRIX_COLS 16
diff --git a/keyboards/durgod/k3x0/halconf.h b/keyboards/durgod/k3x0/halconf.h
index fa20fe30a9..d2a9d8c7c0 100644
--- a/keyboards/durgod/k3x0/halconf.h
+++ b/keyboards/durgod/k3x0/halconf.h
@@ -19,4 +19,6 @@
#define HAL_USE_PAL TRUE
#define PAL_USE_CALLBACKS TRUE
+#define HAL_USE_GPT TRUE
+
#include_next <halconf.h>
diff --git a/keyboards/ergodox_stm32/matrix.c b/keyboards/ergodox_stm32/matrix.c
index 383bf9790a..094d4a9e0f 100644
--- a/keyboards/ergodox_stm32/matrix.c
+++ b/keyboards/ergodox_stm32/matrix.c
@@ -119,10 +119,6 @@ uint8_t matrix_scan(void) {
return 0;
}
-bool matrix_is_modified(void) {
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col) {
return (matrix[row] & (1 << col));
diff --git a/keyboards/ergotaco/matrix.c b/keyboards/ergotaco/matrix.c
index e5af1c27fd..16300a7e4f 100644
--- a/keyboards/ergotaco/matrix.c
+++ b/keyboards/ergotaco/matrix.c
@@ -199,11 +199,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void) // deprecated and evidently not called.
-{
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/gboards/gergoplex/matrix.c b/keyboards/gboards/gergoplex/matrix.c
index 716390241a..a075b85725 100644
--- a/keyboards/gboards/gergoplex/matrix.c
+++ b/keyboards/gboards/gergoplex/matrix.c
@@ -152,11 +152,6 @@ uint8_t matrix_scan(void) {
return 1;
}
-bool matrix_is_modified(void) // deprecated and evidently not called.
-{
- return true;
-}
-
inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
diff --git a/keyboards/georgi/matrix.c b/keyboards/georgi/matrix.c
index 438412102b..7d635ad8d7 100644
--- a/keyboards/georgi/matrix.c
+++ b/keyboards/georgi/matrix.c
@@ -220,11 +220,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void) // deprecated and evidently not called.
-{
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/gergo/matrix.c b/keyboards/gergo/matrix.c
index 655e729356..443e97132b 100644
--- a/keyboards/gergo/matrix.c
+++ b/keyboards/gergo/matrix.c
@@ -273,11 +273,6 @@ uint8_t matrix_scan(void) {
return 1;
}
-bool matrix_is_modified(void) // deprecated and evidently not called.
-{
- return true;
-}
-
inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h b/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h
new file mode 100644
index 0000000000..fd8f1d6859
--- /dev/null
+++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h
@@ -0,0 +1,20 @@
+// Copyright 2021 Victor Toni (@vitoni)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#if defined(RGB_MATRIX_ENABLE)
+ #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+ // number of milliseconds to wait until turning off RGB automatically
+ #define RGB_DISABLE_TIMEOUT 300000 // 300 seconds / 5 min
+ // start fading out before getting disabled
+ // fading out is timed (depending on the rgb_matrix_config.speed) to have finished before reaching RGB_DISABLE_TIMEOUT
+ #define RGB_DISABLE_WITH_FADE_OUT
+ #define RGB_DISABLE_WHEN_USB_SUSPENDED
+ // number of milliseconds to wait until activating RGB idle effects
+ #define RGB_IDLE_TIMEOUT 4500 // 4.5 seconds
+ // activate breathe effect when idle
+ #define RGB_IDLE_BREATHE
+ // fade in when we have been suspended
+ #define RGB_FADE_IN
+#endif
diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c b/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c
new file mode 100644
index 0000000000..d5b64c153a
--- /dev/null
+++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c
@@ -0,0 +1,148 @@
+// Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>,
+// Copyright 2021 Victor Toni (@vitoni)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include QMK_KEYBOARD_H
+
+#include "vitoni.h"
+
+enum layer_names {
+ _BASE,
+ _MOV,
+ _RGB
+};
+
+// clang-format off
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+// ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Prt Rotary(Mute)
+// ~ 1 2 3 4 5 6 7 8 9 0 - (=) BackSpc Del
+// Tab Q W E R T Y U I O P [ ] PgUp
+// Caps A S D F G H J K L ; " # Enter PgDn
+// Sh_L / Z X C V B N M , . ? Sh_R Up End
+// Ct_L Win_L Alt_L SPACE Alt_R FN Ct_R Left Down Right
+
+
+ //
+ // This keyboard defaults to 6KRO instead of NKRO for compatibility reasons (some KVMs and BIOSes are incompatible with NKRO).
+ // Since this is, among other things, a "gaming" keyboard, a key combination to enable NKRO on the fly is provided for convenience.
+ // Press CAPS+N to toggle between 6KRO and NKRO. This setting is persisted to the EEPROM and thus persists between restarts.
+ [_BASE] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE,
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP,
+ MO(_MOV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN,
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, TG(_RGB),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+
+ [_MOV] = LAYOUT(
+ RESET, KC_MYCM, KC_WHOM, KC_CALC, KC_MSEL, KC_MPRV, KC_MPLY, KC_MSTP, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, _______,
+ _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END
+ ),
+
+ [_RGB] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_SPI,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, RGB_SPD,
+ _______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI
+ ),
+
+};
+// clang-format on
+
+#if defined(ENCODER_ENABLE)
+bool encoder_update_user(uint8_t index, bool clockwise) {
+ switch (get_highest_layer(layer_state)) {
+ case _MOV:
+ if (clockwise) {
+ tap_code16(C(KC_TAB));
+ } else {
+ tap_code16(S(C(KC_TAB)));
+ }
+ break;
+#if defined(RGB_MATRIX_ENABLE)
+ case _RGB:
+ if (clockwise) {
+ rgb_matrix_increase_val_noeeprom();
+ } else {
+ rgb_matrix_decrease_val_noeeprom();
+ }
+ break;
+#endif // RGB_MATRIX_ENABLE
+ default:
+ if (clockwise) {
+ tap_code(KC_VOLU);
+ } else {
+ tap_code(KC_VOLD);
+ }
+ break;
+ }
+ return true;
+}
+#endif // ENCODER_ENABLE
+
+#if defined(RGB_MATRIX_ENABLE)
+/*
+* Set up default RGB color.
+*/
+void rgb_matrix_set_default_color(void) {
+ rgb_matrix_sethsv_noeeprom_user(HSV_CHARTREUSE);
+}
+
+/*
+* Set up RGB defaults.
+*/
+void rgb_matrix_configure_default_settings(void) {
+ rgb_matrix_set_default_color();
+}
+
+void keyboard_post_init_user(void) {
+ rgb_matrix_enable_noeeprom();
+ rgb_matrix_configure_default_settings();
+}
+
+/*
+* Use RGB underglow to indicate specific layers.
+*/
+layer_state_t layer_state_set_user(layer_state_t state) {
+ switch (get_highest_layer(state)) {
+ case _MOV:
+ rgb_matrix_sethsv_noeeprom_user(HSV_SPRINGGREEN);
+ break;
+ case _RGB:
+ rgb_matrix_sethsv_noeeprom_user(HSV_GREEN);
+ break;
+ default: // for any other layer
+ rgb_matrix_set_default_color();
+ break;
+ }
+ return state;
+}
+
+void matrix_scan_user(void) {
+ matrix_scan_user_rgb();
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+ if (!process_record_user_rgb(keycode, record)) {
+ return false;
+ }
+
+ switch (keycode) {
+ case RESET: // when activating RESET mode for flashing
+ if (record->event.pressed) {
+ rgb_matrix_set_color_all(63, 0, 0);
+ rgb_matrix_driver.flush();
+ }
+ return true;
+ }
+ return true; // Process all other keycodes normally
+}
+#endif // RGB_MATRIX_ENABLE
diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc b/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc
new file mode 100644
index 0000000000..38a74a568b
--- /dev/null
+++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc
@@ -0,0 +1,104 @@
+= ViToni's keymap for GMMK Pro ISO
+
+== Layout
+Based on the stock layout but making use of CAPS as FN similar to laptop keyboards.
+This frees up the left row for other uses (although not remapped yet).
+Since both Delete and Insert are used for coding they are part of the CAPS layer as well.
+
+The differences are as follows:
+
+=== Layer 0 (`_BASE`)
+Mostly stock + CAPS goes to layer `_MOV`.
+FN toggles the layer `_RGB`.
+
+=== Layer 1 (`_MOV`), accessed by pressing `CAPS` on layer `_BASE`
+[%header]
+|===
+| Key / Action | Mapped to
+| ESC | _RESET_
+| F1 | KC_MYCM
+| F2 | KC_WHOM
+| F3 | KC_CALC
+| F4 | KC_MSEL
+| F5 | KC_MPRV
+| F6 | KC_MPLY
+| F7 | KC_MSTP
+| F8 | KC_MNXT
+| F9 | KC_MUTE
+| F10 | KC_VOLD
+| F11 | KC_VOLU
+| N | NK_TOGG
+| Delete | Insert
+| Left | Home
+| Right | End
+| Up | PgUp
+| Down | PgDn
+|===
+
+=== Layer 2 (`_RGB`), accessed by pressing `FN` on layer `_BASE`
+Revamped the stock FN layer to focus on RGB only.
+
+[%header]
+|===
+| Key / Action | Mapped to
+| Knob clockwise | Value/Brightness up
+| Knob anti-clockwise | Value/Brightness down
+| Backspace | _RESET_
+| Enter | RGB_TOG
+| Del | RGB_MOD
+| PgUp | RGB_RMOD
+| PgDn | RGB_SPI
+| End | RGB_SPD
+| Left | RGB_HUD
+| Right | RGB_HUI
+| Up | RGB_SAI
+| Down | RGB_SAD
+|===
+
+No other changes have been made.
+
+== RGB light
+
+The code customizing RGB light usage is decribed here:
+
+* link:../../../../../../users/vitoni/readme.adoc[/users/vitoni/readme.adoc]
+
+When using `RGB_DISABLE_TIMEOUT` addtional options are available:
+
+* `RGB_FADE_IN` makes the RGB lights fade in instead of setting the value/brightness to 100% (implicitly due to HSV including the brightness) when resuming after RGB lights have been turned off.
+Fade in occurs when the keyboard is initialized and when the RGB brightness has been changed (e.g. suspending, fade out, etc.).
+* `RGB_DISABLE_WITH_FADE_OUT` activates fade out before the keyboard is disabled by `RGB_DISABLE_TIMEOUT`.
+
+Parameters used to define the behavior are:
+[%header]
+|===
+|Key | Default | Description
+
+| RGB_MATRIX_MAXIMUM_BRIGHTNESS
+| 200 (&lt;= UNIT8_MAX)
+| Maximum assumed value for brightness.
+Used to calculate lead time for fade out before suspend timeout.
+
+|===
+
+`RGB_IDLE_TIMEOUT` enables fading out after being idle for the defined time and allows
+* `RGB_IDLE_BREATHE` also activates a brethe effect while idling.
+
+[%header]
+|===
+|Key | Default | Description
+
+|RGB_IDLE_TIMEOUT
+|4500
+|Time in milliseconds without activity before considered to be idle.
+
+|RGB_IDLE_MINIMUM_BRIGHTNESS
+|`RGB_MATRIX_MAXIMUM_BRIGHTNESS` / 5
+|Brightness value RGB is dimmed to when starting to idle. +
+When breathing used as the lower bound of the brightness value.
+
+|RGB_IDLE_MAXIMUM_BRIGHTNESS
+|`RGB_MATRIX_MAXIMUM_BRIGHTNESS` * 2/5
+|Upper bound of brightness value of the RGB light while breathing.
+
+|===
diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c
index a21cd08e14..a70e8c5aca 100644
--- a/keyboards/handwired/dactyl/matrix.c
+++ b/keyboards/handwired/dactyl/matrix.c
@@ -281,14 +281,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void) // deprecated and evidently not called.
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/handwired/frenchdev/matrix.c b/keyboards/handwired/frenchdev/matrix.c
index 5ab254a6f9..a043f78538 100644
--- a/keyboards/handwired/frenchdev/matrix.c
+++ b/keyboards/handwired/frenchdev/matrix.c
@@ -174,12 +174,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/handwired/not_so_minidox/config.h b/keyboards/handwired/not_so_minidox/config.h
index de9286eda5..177552e2a6 100644
--- a/keyboards/handwired/not_so_minidox/config.h
+++ b/keyboards/handwired/not_so_minidox/config.h
@@ -40,6 +40,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define USE_SERIAL
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
//#define EE_HANDS
#define MASTER_LEFT
diff --git a/keyboards/handwired/not_so_minidox/i2c.c b/keyboards/handwired/not_so_minidox/i2c.c
deleted file mode 100644
index 084c890c40..0000000000
--- a/keyboards/handwired/not_so_minidox/i2c.c
+++ /dev/null
@@ -1,162 +0,0 @@
-#include <util/twi.h>
-#include <avr/io.h>
-#include <stdlib.h>
-#include <avr/interrupt.h>
-#include <util/twi.h>
-#include <stdbool.h>
-#include "i2c.h"
-
-#ifdef USE_I2C
-
-// Limits the amount of we wait for any one i2c transaction.
-// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
-// 9 bits, a single transaction will take around 90μs to complete.
-//
-// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
-// poll loop takes at least 8 clock cycles to execute
-#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
-
-#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
-
-volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-static volatile uint8_t slave_buffer_pos;
-static volatile bool slave_has_register_set = false;
-
-// Wait for an i2c operation to finish
-inline static
-void i2c_delay(void) {
- uint16_t lim = 0;
- while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
- lim++;
-
- // easier way, but will wait slightly longer
- // _delay_us(100);
-}
-
-// Setup twi to run at 100kHz
-void i2c_master_init(void) {
- // no prescaler
- TWSR = 0;
- // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
- // Check datasheets for more info.
- TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
-}
-
-// Start a transaction with the given i2c slave address. The direction of the
-// transfer is set with I2C_READ and I2C_WRITE.
-// returns: 0 => success
-// 1 => error
-uint8_t i2c_master_start(uint8_t address) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
-
- i2c_delay();
-
- // check that we started successfully
- if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
- return 1;
-
- TWDR = address;
- TWCR = (1<<TWINT) | (1<<TWEN);
-
- i2c_delay();
-
- if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
- return 1; // slave did not acknowledge
- else
- return 0; // success
-}
-
-
-// Finish the i2c transaction.
-void i2c_master_stop(void) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
-
- uint16_t lim = 0;
- while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
- lim++;
-}
-
-// Write one byte to the i2c slave.
-// returns 0 => slave ACK
-// 1 => slave NACK
-uint8_t i2c_master_write(uint8_t data) {
- TWDR = data;
- TWCR = (1<<TWINT) | (1<<TWEN);
-
- i2c_delay();
-
- // check if the slave acknowledged us
- return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
-}
-
-// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
-// if ack=0 the acknowledge bit is not set.
-// returns: byte read from i2c device
-uint8_t i2c_master_read(int ack) {
- TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
-
- i2c_delay();
- return TWDR;
-}
-
-void i2c_reset_state(void) {
- TWCR = 0;
-}
-
-void i2c_slave_init(uint8_t address) {
- TWAR = address << 0; // slave i2c address
- // TWEN - twi enable
- // TWEA - enable address acknowledgement
- // TWINT - twi interrupt flag
- // TWIE - enable the twi interrupt
- TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
-}
-
-ISR(TWI_vect);
-
-ISR(TWI_vect) {
- uint8_t ack = 1;
- switch(TW_STATUS) {
- case TW_SR_SLA_ACK:
- // this device has been addressed as a slave receiver
- slave_has_register_set = false;
- break;
-
- case TW_SR_DATA_ACK:
- // this device has received data as a slave receiver
- // The first byte that we receive in this transaction sets the location
- // of the read/write location of the slaves memory that it exposes over
- // i2c. After that, bytes will be written at slave_buffer_pos, incrementing
- // slave_buffer_pos after each write.
- if(!slave_has_register_set) {
- slave_buffer_pos = TWDR;
- // don't acknowledge the master if this memory loctaion is out of bounds
- if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
- ack = 0;
- slave_buffer_pos = 0;
- }
- slave_has_register_set = true;
- } else {
- i2c_slave_buffer[slave_buffer_pos] = TWDR;
- BUFFER_POS_INC();
- }
- break;
-
- case TW_ST_SLA_ACK:
- case TW_ST_DATA_ACK:
- // master has addressed this device as a slave transmitter and is
- // requesting data.
- TWDR = i2c_slave_buffer[slave_buffer_pos];
- BUFFER_POS_INC();
- break;
-
- case TW_BUS_ERROR: // something went wrong, reset twi state
- TWCR = 0;
- default:
- break;
- }
- // Reset everything, so we are ready for the next TWI interrupt
- TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
-}
-#endif
diff --git a/keyboards/handwired/not_so_minidox/i2c.h b/keyboards/handwired/not_so_minidox/i2c.h
deleted file mode 100644
index 8910e70f10..0000000000
--- a/keyboards/handwired/not_so_minidox/i2c.h
+++ /dev/null
@@ -1,46 +0,0 @@
-#pragma once
-
-#include <stdint.h>
-
-#ifndef F_CPU
-#define F_CPU 16000000UL
-#endif
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-#define I2C_ACK 1
-#define I2C_NACK 0
-
-#define SLAVE_BUFFER_SIZE 0x10
-
-// i2c SCL clock frequency
-#define SCL_CLOCK 400000L
-
-extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
-
-void i2c_master_init(void);
-uint8_t i2c_master_start(uint8_t address);
-void i2c_master_stop(void);
-uint8_t i2c_master_write(uint8_t data);
-uint8_t i2c_master_read(int);
-void i2c_reset_state(void);
-void i2c_slave_init(uint8_t address);
-
-
-static inline unsigned char i2c_start_read(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_READ);
-}
-
-static inline unsigned char i2c_start_write(unsigned char addr) {
- return i2c_master_start((addr << 1) | I2C_WRITE);
-}
-
-// from SSD1306 scrips
-extern unsigned char i2c_rep_start(unsigned char addr);
-extern void i2c_start_wait(unsigned char addr);
-extern unsigned char i2c_readAck(void);
-extern unsigned char i2c_readNak(void);
-extern unsigned char i2c_read(unsigned char ack);
-
-#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
diff --git a/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c b/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c
index 296a7a281d..435eed2f1f 100644
--- a/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c
+++ b/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c
@@ -8,17 +8,10 @@
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
-#define _ADJUST 16
+#define _ADJUST 3
-enum custom_keycodes {
- QWERTY = SAFE_RANGE,
- LOWER,
- RAISE,
- ADJUST,
-};
-
-#define KC_LOWR LOWER
-#define KC_RASE RAISE
+#define KC_LOWR MO(_LOWER)
+#define KC_RASE MO(_RAISE)
#define KC_RST RESET
#define KC_CAD LCTL(LALT(KC_DEL))
@@ -72,45 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
)
};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case QWERTY:
- if (record->event.pressed) {
- set_single_persistent_default_layer(_QWERTY);
- }
- return false;
- break;
- case LOWER:
- if (record->event.pressed) {
- layer_on(_LOWER);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- } else {
- layer_off(_LOWER);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- }
- return false;
- break;
- case RAISE:
- if (record->event.pressed) {
- layer_on(_RAISE);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- } else {
- layer_off(_RAISE);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- }
- return false;
- break;
- case ADJUST:
- if (record->event.pressed) {
- layer_on(_ADJUST);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- } else {
- layer_off(_ADJUST);
- update_tri_layer(_LOWER, _RAISE, _ADJUST);
- }
- return false;
- break;
- }
- return true;
+layer_state_t layer_state_set_user(layer_state_t state) {
+ return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
}
diff --git a/keyboards/handwired/not_so_minidox/matrix.c b/keyboards/handwired/not_so_minidox/matrix.c
deleted file mode 100644
index b7cec9370c..0000000000
--- a/keyboards/handwired/not_so_minidox/matrix.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "split_util.h"
-#include "config.h"
-#include "quantum.h"
-
-#ifdef USE_I2C
-# include "i2c.h"
-#else // USE_SERIAL
-# include "serial.h"
-#endif
-
-#ifndef DEBOUNCE
-# define DEBOUNCE 5
-#endif
-
-#define ERROR_DISCONNECT_COUNT 5
-
-static uint8_t debouncing = DEBOUNCE;
-static const int ROWS_PER_HAND = MATRIX_ROWS/2;
-static uint8_t error_count = 0;
-
-static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
-static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void)
-{
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
- return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
- debug_enable = true;
- debug_matrix = true;
- debug_mouse = true;
- // initialize row and col
- unselect_rows();
- init_cols();
-
- setPinOutput(B0);
- setPinOutput(D5);
-
- // initialize matrix state: all keys off
- for (uint8_t i=0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- matrix_debouncing[i] = 0;
- }
-
- matrix_init_quantum();
-}
-
-uint8_t _matrix_scan(void)
-{
- // Right hand is stored after the left in the matirx so, we need to offset it
- int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
-
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- select_row(i);
- _delay_us(30); // without this wait read unstable value.
- matrix_row_t cols = read_cols();
- if (matrix_debouncing[i+offset] != cols) {
- matrix_debouncing[i+offset] = cols;
- debouncing = DEBOUNCE;
- }
- unselect_rows();
- }
-
- if (debouncing) {
- if (--debouncing) {
- _delay_ms(1);
- } else {
- for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
- matrix[i+offset] = matrix_debouncing[i+offset];
- }
- }
- }
-
- return 1;
-}
-
-#ifdef USE_I2C
-
-// Get rows from other half over i2c
-int i2c_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
- int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
- if (err) goto i2c_error;
-
- // start of matrix stored at 0x00
- err = i2c_master_write(0x00);
- if (err) goto i2c_error;
-
- // Start read
- err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
- if (err) goto i2c_error;
-
- if (!err) {
- int i;
- for (i = 0; i < ROWS_PER_HAND-1; ++i) {
- matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
- }
- matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
- i2c_master_stop();
- } else {
-i2c_error: // the cable is disconnceted, or something else went wrong
- i2c_reset_state();
- return err;
- }
-
- return 0;
-}
-
-#else // USE_SERIAL
-
-int serial_transaction(void) {
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
-
- if (serial_update_buffers()) {
- return 1;
- }
-
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = serial_slave_buffer[i];
- }
- return 0;
-}
-#endif
-
-uint8_t matrix_scan(void)
-{
- int ret = _matrix_scan();
-
-
-
-#ifdef USE_I2C
- if( i2c_transaction() ) {
-#else // USE_SERIAL
- if( serial_transaction() ) {
-#endif
- // turn on the indicator led when halves are disconnected
- writePinLow(D5);
-
- error_count++;
-
- if (error_count > ERROR_DISCONNECT_COUNT) {
- // reset other half if disconnected
- int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- matrix[slaveOffset+i] = 0;
- }
- }
- } else {
- // turn off the indicator led on no error
- writePinHigh(D5);
- error_count = 0;
- }
- matrix_scan_quantum();
- return ret;
-}
-
-void matrix_slave_scan(void) {
- _matrix_scan();
-
- int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2);
-
-#ifdef USE_I2C
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- /* i2c_slave_buffer[i] = matrix[offset+i]; */
- i2c_slave_buffer[i] = matrix[offset+i];
- }
-#else // USE_SERIAL
- for (int i = 0; i < ROWS_PER_HAND; ++i) {
- serial_slave_buffer[i] = matrix[offset+i];
- }
-#endif
-}
-
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_bin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop16(matrix[i]);
- }
- return count;
-}
-
-static void init_cols(void)
-{
- for(int x = 0; x < MATRIX_COLS; x++) {
- _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
- _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
- }
-}
-
-static matrix_row_t read_cols(void)
-{
- matrix_row_t result = 0;
- for(int x = 0; x < MATRIX_COLS; x++) {
- result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
- }
- return result;
-}
-
-static void unselect_rows(void)
-{
- for(int x = 0; x < ROWS_PER_HAND; x++) {
- _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
- _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
- }
-}
-
-static void select_row(uint8_t row)
-{
- _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
- _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
-}
diff --git a/keyboards/handwired/not_so_minidox/rules.mk b/keyboards/handwired/not_so_minidox/rules.mk
index 3eab0fba7e..8f9772df22 100644
--- a/keyboards/handwired/not_so_minidox/rules.mk
+++ b/keyboards/handwired/not_so_minidox/rules.mk
@@ -7,19 +7,14 @@ BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
-BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
+BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = no # Audio control and System control
+EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
+COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
-RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
-USE_I2C = no
-CUSTOM_MATRIX = yes
-SRC += matrix.c \
- i2c.c \
- split_util.c \
- serial.c
+SPLIT_KEYBOARD = yes
diff --git a/keyboards/handwired/not_so_minidox/serial.c b/keyboards/handwired/not_so_minidox/serial.c
deleted file mode 100644
index 74bcbb6bf6..0000000000
--- a/keyboards/handwired/not_so_minidox/serial.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * WARNING: be careful changing this code, it is very timing dependent
- */
-
-#ifndef F_CPU
-#define F_CPU 16000000
-#endif
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <stdbool.h>
-#include "serial.h"
-
-#ifndef USE_I2C
-
-// Serial pulse period in microseconds. Its probably a bad idea to lower this
-// value.
-#define SERIAL_DELAY 24
-
-uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
-uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
-
-#define SLAVE_DATA_CORRUPT (1<<0)
-volatile uint8_t status = 0;
-
-inline static
-void serial_delay(void) {
- _delay_us(SERIAL_DELAY);
-}
-
-inline static
-void serial_output(void) {
- SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
-}
-
-// make the serial pin an input with pull-up resistor
-inline static
-void serial_input(void) {
- SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-inline static
-uint8_t serial_read_pin(void) {
- return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
-}
-
-inline static
-void serial_low(void) {
- SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
-}
-
-inline static
-void serial_high(void) {
- SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
-}
-
-void serial_master_init(void) {
- serial_output();
- serial_high();
-}
-
-void serial_slave_init(void) {
- serial_input();
-
- // Enable INT0
- EIMSK |= _BV(INT0);
- // Trigger on falling edge of INT0
- EICRA &= ~(_BV(ISC00) | _BV(ISC01));
-}
-
-// Used by the master to synchronize timing with the slave.
-static
-void sync_recv(void) {
- serial_input();
- // This shouldn't hang if the slave disconnects because the
- // serial line will float to high if the slave does disconnect.
- while (!serial_read_pin());
- serial_delay();
-}
-
-// Used by the slave to send a synchronization signal to the master.
-static
-void sync_send(void) {
- serial_output();
-
- serial_low();
- serial_delay();
-
- serial_high();
-}
-
-// Reads a byte from the serial line
-static
-uint8_t serial_read_byte(void) {
- uint8_t byte = 0;
- serial_input();
- for ( uint8_t i = 0; i < 8; ++i) {
- byte = (byte << 1) | serial_read_pin();
- serial_delay();
- _delay_us(1);
- }
-
- return byte;
-}
-
-// Sends a byte with MSB ordering
-static
-void serial_write_byte(uint8_t data) {
- uint8_t b = 8;
- serial_output();
- while( b-- ) {
- if(data & (1 << b)) {
- serial_high();
- } else {
- serial_low();
- }
- serial_delay();
- }
-}
-
-// interrupt handle to be used by the slave device
-ISR(SERIAL_PIN_INTERRUPT) {
- sync_send();
-
- uint8_t checksum = 0;
- for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
- serial_write_byte(serial_slave_buffer[i]);
- sync_send();
- checksum += serial_slave_buffer[i];
- }
- serial_write_byte(checksum);
- sync_send();
-
- // wait for the sync to finish sending
- serial_delay();
-
- // read the middle of pulses
- _delay_us(SERIAL_DELAY/2);
-
- uint8_t checksum_computed = 0;
- for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
- serial_master_buffer[i] = serial_read_byte();
- sync_send();
- checksum_computed += serial_master_buffer[i];
- }
- uint8_t checksum_received = serial_read_byte();
- sync_send();
-
- serial_input(); // end transaction
-
- if ( checksum_computed != checksum_received ) {
- status |= SLAVE_DATA_CORRUPT;
- } else {
- status &= ~SLAVE_DATA_CORRUPT;
- }
-}
-
-inline
-bool serial_slave_DATA_CORRUPT(void) {
- return status & SLAVE_DATA_CORRUPT;
-}
-
-// Copies the serial_slave_buffer to the master and sends the
-// serial_master_buffer to the slave.
-//
-// Returns:
-// 0 => no error
-// 1 => slave did not respond
-int serial_update_buffers(void) {
- // this code is very time dependent, so we need to disable interrupts
- cli();
-
- // signal to the slave that we want to start a transaction
- serial_output();
- serial_low();
- _delay_us(1);
-
- // wait for the slaves response
- serial_input();
- serial_high();
- _delay_us(SERIAL_DELAY);
-
- // check if the slave is present
- if (serial_read_pin()) {
- // slave failed to pull the line low, assume not present
- sei();
- return 1;
- }
-
- // if the slave is present syncronize with it
- sync_recv();
-
- uint8_t checksum_computed = 0;
- // receive data from the slave
- for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
- serial_slave_buffer[i] = serial_read_byte();
- sync_recv();
- checksum_computed += serial_slave_buffer[i];
- }
- uint8_t checksum_received = serial_read_byte();
- sync_recv();
-
- if (checksum_computed != checksum_received) {
- sei();
- return 1;
- }
-
- uint8_t checksum = 0;
- // send data to the slave
- for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
- serial_write_byte(serial_master_buffer[i]);
- sync_recv();
- checksum += serial_master_buffer[i];
- }
- serial_write_byte(checksum);
- sync_recv();
-
- // always, release the line when not in use
- serial_output();
- serial_high();
-
- sei();
- return 0;
-}
-
-#endif
diff --git a/keyboards/handwired/not_so_minidox/serial.h b/keyboards/handwired/not_so_minidox/serial.h
deleted file mode 100644
index 28fcc56ce7..0000000000
--- a/keyboards/handwired/not_so_minidox/serial.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#pragma once
-
-#include "config.h"
-#include <stdbool.h>
-
-/* TODO: some defines for interrupt setup */
-#define SERIAL_PIN_DDR DDRD
-#define SERIAL_PIN_PORT PORTD
-#define SERIAL_PIN_INPUT PIND
-#define SERIAL_PIN_MASK _BV(PD0)
-#define SERIAL_PIN_INTERRUPT INT0_vect
-
-#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
-#define SERIAL_MASTER_BUFFER_LENGTH 1
-
-// Buffers for master - slave communication
-extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
-extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
-
-void serial_master_init(void);
-void serial_slave_init(void);
-int serial_update_buffers(void);
-bool serial_slave_data_corrupt(void);
diff --git a/keyboards/handwired/not_so_minidox/split_util.c b/keyboards/handwired/not_so_minidox/split_util.c
deleted file mode 100644
index 39639c3b4b..0000000000
--- a/keyboards/handwired/not_so_minidox/split_util.c
+++ /dev/null
@@ -1,84 +0,0 @@
-#include <avr/io.h>
-#include <avr/wdt.h>
-#include <avr/power.h>
-#include <avr/interrupt.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include "split_util.h"
-#include "matrix.h"
-#include "keyboard.h"
-#include "config.h"
-
-#ifdef USE_I2C
-# include "i2c.h"
-#else
-# include "serial.h"
-#endif
-
-volatile bool isLeftHand = true;
-
-static void setup_handedness(void) {
- #ifdef EE_HANDS
- isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
- #else
- // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
- #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
- isLeftHand = !has_usb();
- #else
- isLeftHand = has_usb();
- #endif
- #endif
-}
-
-static void keyboard_master_setup(void) {
-#ifdef USE_I2C
- i2c_master_init();
-#ifdef SSD1306OLED
- matrix_master_OLED_init ();
-#endif
-#else
- serial_master_init();
-#endif
-}
-
-static void keyboard_slave_setup(void) {
-#ifdef USE_I2C
- i2c_slave_init(SLAVE_I2C_ADDRESS);
-#else
- serial_slave_init();
-#endif
-}
-
-bool has_usb(void) {
- USBCON |= (1 << OTGPADE); //enables VBUS pad
- _delay_us(5);
- return (USBSTA & (1<<VBUS)); //checks state of VBUS
-}
-
-void split_keyboard_setup(void) {
- setup_handedness();
-
- if (has_usb()) {
- keyboard_master_setup();
- } else {
- keyboard_slave_setup();
- }
- sei();
-}
-
-void keyboard_slave_loop(void) {
- matrix_init();
-
- while (1) {
- matrix_slave_scan();
- }
-}
-
-// this code runs before the usb and keyboard is initialized
-void matrix_setup(void) {
- split_keyboard_setup();
-
- if (!has_usb()) {
- keyboard_slave_loop();
- }
-}
diff --git a/keyboards/handwired/not_so_minidox/split_util.h b/keyboards/handwired/not_so_minidox/split_util.h
deleted file mode 100644
index 807412cd38..0000000000
--- a/keyboards/handwired/not_so_minidox/split_util.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#pragma once
-
-#include <stdbool.h>
-#include "eeconfig.h"
-
-#define SLAVE_I2C_ADDRESS 0x32
-
-extern volatile bool isLeftHand;
-
-// slave version of matix scan, defined in matrix.c
-void matrix_slave_scan(void);
-
-void split_keyboard_setup(void);
-bool has_usb(void);
-void keyboard_slave_loop(void);
-
-void matrix_master_OLED_init (void);
diff --git a/keyboards/handwired/onekey/teensy_32/rules.mk b/keyboards/handwired/onekey/teensy_32/rules.mk
index c1b90d0d2b..937c9d5103 100644
--- a/keyboards/handwired/onekey/teensy_32/rules.mk
+++ b/keyboards/handwired/onekey/teensy_32/rules.mk
@@ -1,5 +1,8 @@
# MCU name
MCU = MK20DX256
+# Bootloader selection
+BOOTLOADER = halfkay
+
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/handwired/onekey/teensy_lc/rules.mk b/keyboards/handwired/onekey/teensy_lc/rules.mk
index b3daabe317..0e3c7edf7a 100644
--- a/keyboards/handwired/onekey/teensy_lc/rules.mk
+++ b/keyboards/handwired/onekey/teensy_lc/rules.mk
@@ -2,5 +2,8 @@
MCU = MKL26Z64
USE_CHIBIOS_CONTRIB = yes
+# Bootloader selection
+BOOTLOADER = halfkay
+
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/handwired/promethium/matrix.c b/keyboards/handwired/promethium/matrix.c
index e3a41af288..90dbce14a9 100644
--- a/keyboards/handwired/promethium/matrix.c
+++ b/keyboards/handwired/promethium/matrix.c
@@ -148,14 +148,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
diff --git a/keyboards/handwired/pterodactyl/matrix.c b/keyboards/handwired/pterodactyl/matrix.c
index 21e6a128df..d0f74802a0 100644
--- a/keyboards/handwired/pterodactyl/matrix.c
+++ b/keyboards/handwired/pterodactyl/matrix.c
@@ -282,14 +282,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void) // deprecated and evidently not called.
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/handwired/wakizashi40/config.h b/keyboards/handwired/wakizashi40/config.h
new file mode 100644
index 0000000000..78f85f2197
--- /dev/null
+++ b/keyboards/handwired/wakizashi40/config.h
@@ -0,0 +1,20 @@
+/* Copyright 2021 xiao (@xia0)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+#define DYNAMIC_KEYMAP_LAYER_COUNT 12
diff --git a/keyboards/handwired/wakizashi40/info.json b/keyboards/handwired/wakizashi40/info.json
new file mode 100644
index 0000000000..b64ab55116
--- /dev/null
+++ b/keyboards/handwired/wakizashi40/info.json
@@ -0,0 +1,88 @@
+{
+ "manufacturer": "fumbucker",
+ "keyboard_name": "Wakizashi 40",
+ "maintainer": "fumbucker",
+ "debounce": 5,
+ "processor": "at90usb1286",
+ "diode_direction": "COL2ROW",
+ "features": {
+ "audio": false,
+ "backlight": false,
+ "bluetooth": false,
+ "bootmagic": true,
+ "command": false,
+ "console": true,
+ "extrakey": true,
+ "midi": false,
+ "mousekey": true,
+ "nkro": true,
+ "rgblight": false,
+ "unicode": false
+ },
+ "matrix_pins": {
+ "cols": ["C5", "C4", "D2", "D3", "D4", "D5", "C6", "D7", "B0", "B1", "B2", "B3", "B4"],
+ "rows": ["C0", "C1", "C2", "C3"]
+ },
+ "usb": {
+ "device_ver": "0x0001",
+ "pid": "0x7740",
+ "vid": "0x6662"
+ },
+ "layout_aliases": {
+ "LAYOUT": "LAYOUT_all"
+ },
+ "layouts": {
+ "LAYOUT_all": {
+ "layout": [
+ { "label": "TAB", "matrix": [0, 0], "w": 1.5, "x": 0, "y": 0 },
+ { "label": "Q", "matrix": [0, 2], "w": 1, "x": 1.5, "y": 0 },
+ { "label": "W", "matrix": [0, 3], "w": 1, "x": 2.5, "y": 0 },
+ { "label": "E", "matrix": [0, 4], "w": 1, "x": 3.5, "y": 0 },
+ { "label": "R", "matrix": [0, 5], "w": 1, "x": 4.5, "y": 0 },
+ { "label": "T", "matrix": [0, 6], "w": 1, "x": 5.5, "y": 0 },
+ { "label": "Y", "matrix": [0, 7], "w": 1, "x": 6.5, "y": 0 },
+ { "label": "U", "matrix": [0, 8], "w": 1, "x": 7.5, "y": 0 },
+ { "label": "I", "matrix": [0, 9], "w": 1, "x": 8.5, "y": 0 },
+ { "label": "O", "matrix": [0, 10], "w": 1, "x": 9.5, "y": 0 },
+ { "label": "P", "matrix": [0, 11], "w": 1, "x": 10.5, "y": 0 },
+ { "label": "BACKSPACE", "matrix": [0, 12], "w": 1.5, "x": 11.5, "y": 0 },
+
+ { "label": "CAPSLOCK", "matrix": [1, 0], "w": 1.25, "x": 0, "y": 1 },
+ { "label": "A", "matrix": [1, 1], "w": 1, "x": 1.25, "y": 1 },
+ { "label": "S", "matrix": [1, 2], "w": 1, "x": 2.25, "y": 1 },
+ { "label": "D", "matrix": [1, 3], "w": 1, "x": 3.25, "y": 1 },
+ { "label": "F", "matrix": [1, 4], "w": 1, "x": 4.25, "y": 1 },
+ { "label": "G", "matrix": [1, 5], "w": 1, "x": 5.75, "y": 1 },
+ { "label": "H", "matrix": [1, 7], "w": 1, "x": 6.75, "y": 1 },
+ { "label": "J", "matrix": [1, 8], "w": 1, "x": 7.75, "y": 1 },
+ { "label": "K", "matrix": [1, 9], "w": 1, "x": 8.75, "y": 1 },
+ { "label": "L", "matrix": [1, 10], "w": 1, "x": 9.75, "y": 1 },
+ { "label": "SEMICOLON", "matrix": [1, 11], "w": 1, "x": 10.75, "y": 1 },
+ { "label": "ENTER", "matrix": [1, 12], "w": 1.25, "x": 11.75, "y": 1 },
+
+ { "label": "LSHIFT", "matrix": [2, 0], "w": 1, "x": 0, "y": 2 },
+ { "label": "Z", "matrix": [2, 1], "w": 1, "x": 1, "y": 2 },
+ { "label": "X", "matrix": [2, 2], "w": 1, "x": 2, "y": 2 },
+ { "label": "C", "matrix": [2, 3], "w": 1, "x": 3, "y": 2 },
+ { "label": "V", "matrix": [2, 4], "w": 1, "x": 4, "y": 2 },
+ { "label": "B", "matrix": [2, 5], "w": 1, "x": 5, "y": 2 },
+ { "label": "ESCAPE", "matrix": [2, 6], "w": 1, "x": 6, "y": 2 },
+ { "label": "N", "matrix": [2, 7], "w": 1, "x": 7, "y": 2 },
+ { "label": "M", "matrix": [2, 8], "w": 1, "x": 8, "y": 2 },
+ { "label": "COMMA", "matrix": [2, 9], "w": 1, "x": 9, "y": 2 },
+ { "label": "PERIOD", "matrix": [2, 10], "w": 1, "x": 10, "y": 2 },
+ { "label": "SLASH", "matrix": [2, 11], "w": 1, "x": 11, "y": 2 },
+ { "label": "RSHIFT", "matrix": [2, 12], "w": 1, "x": 12, "y": 2 },
+
+ { "label": "LCTRL", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 },
+ { "label": "LWIN", "matrix": [3, 1], "w": 1.25, "x": 1.25, "y": 3 },
+ { "label": "LALT", "matrix": [3, 3], "w": 1.25, "x": 2.5, "y": 3 },
+ { "label": "SPACE1", "matrix": [3, 5], "w": 2.75, "x": 3.75, "y": 3 },
+ { "label": "SPACE2", "matrix": [3, 7], "w": 2.75, "x": 6.5, "y": 3 },
+ { "label": "RALT", "matrix": [3, 9], "w": 1.25, "x": 9.25, "y": 3 },
+ { "label": "MENU", "matrix": [3, 11], "w": 1.25, "x": 10.5, "y": 3 },
+ { "label": "RCTRL", "matrix": [3, 12], "w": 1.25, "x": 11.75, "y": 3 }
+ ]
+ }
+ }
+}
diff --git a/keyboards/handwired/wakizashi40/keymaps/default/keymap.c b/keyboards/handwired/wakizashi40/keymaps/default/keymap.c
new file mode 100644
index 0000000000..910e5bde12
--- /dev/null
+++ b/keyboards/handwired/wakizashi40/keymaps/default/keymap.c
@@ -0,0 +1,44 @@
+/* Copyright 2021 xiao (@xia0)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL),
+
+ [1] = LAYOUT_all(
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+ MO(3), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [2] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
+ MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
diff --git a/keyboards/handwired/wakizashi40/keymaps/via/keymap.c b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c
new file mode 100644
index 0000000000..d456b8b40a
--- /dev/null
+++ b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c
@@ -0,0 +1,92 @@
+/* Copyright 2021 xiao (@xia0)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include QMK_KEYBOARD_H
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ [0] = LAYOUT_all(
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+ MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
+ KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL),
+
+ [1] = LAYOUT_all(
+ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
+ MO(11), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [2] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
+ MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [3] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [4] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [5] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [6] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [7] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [8] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [9] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [10] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+ [11] = LAYOUT_all(
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
+
+};
diff --git a/keyboards/handwired/wakizashi40/keymaps/via/rules.mk b/keyboards/handwired/wakizashi40/keymaps/via/rules.mk
new file mode 100644
index 0000000000..7a49719505
--- /dev/null
+++ b/keyboards/handwired/wakizashi40/keymaps/via/rules.mk
@@ -0,0 +1,4 @@
+# rules.mk overrides to enable VIA
+
+VIA_ENABLE = yes
+LTO_ENABLE = yes
diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md
new file mode 100644
index 0000000000..d94a75651c
--- /dev/null
+++ b/keyboards/handwired/wakizashi40/readme.md
@@ -0,0 +1,19 @@
+# Wakizashi 40
+
+![Wakizashi40](https://cdn.thingiverse.com/renders/51/50/81/13/a9/7078248666f70b422127c6662cf79563_preview_featured.jpg)
+
+Reverse stagger 40% keyboard based on the Katana 60.
+
+* Keyboard Maintainer: [fumbucker](https://github.com/xia0)
+* Hardware Supported: Teensy2++
+* Hardware Availability: [thingiverse](https://www.thingiverse.com/thing:3467930)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make handwired/wakizashi40:default
+
+See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+
+## Bootloader
+
+* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Capslock + R).
diff --git a/keyboards/handwired/wakizashi40/rules.mk b/keyboards/handwired/wakizashi40/rules.mk
new file mode 100644
index 0000000000..6e7633bfe0
--- /dev/null
+++ b/keyboards/handwired/wakizashi40/rules.mk
@@ -0,0 +1 @@
+# This file intentionally left blank
diff --git a/keyboards/helix/pico/matrix.c b/keyboards/helix/pico/matrix.c
index b18213d846..039cca6dcf 100644
--- a/keyboards/helix/pico/matrix.c
+++ b/keyboards/helix/pico/matrix.c
@@ -273,12 +273,6 @@ void matrix_slave_scan(void) {
#endif
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/helix/rev1/matrix.c b/keyboards/helix/rev1/matrix.c
index aa2cc76905..f59391b596 100644
--- a/keyboards/helix/rev1/matrix.c
+++ b/keyboards/helix/rev1/matrix.c
@@ -239,12 +239,6 @@ void matrix_slave_scan(void) {
#endif
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/helix/rev2/matrix.c b/keyboards/helix/rev2/matrix.c
index 8eed7e58b7..699c15358b 100644
--- a/keyboards/helix/rev2/matrix.c
+++ b/keyboards/helix/rev2/matrix.c
@@ -287,12 +287,6 @@ void matrix_slave_scan(void) {
#endif
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/hhkb/ansi/matrix.c b/keyboards/hhkb/ansi/matrix.c
index 529ba8b8fc..5dde74cce9 100644
--- a/keyboards/hhkb/ansi/matrix.c
+++ b/keyboards/hhkb/ansi/matrix.c
@@ -163,15 +163,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix[i] != matrix_prev[i])
- return true;
- }
- return false;
-}
-
inline
bool matrix_has_ghost(void)
{
diff --git a/keyboards/hhkb/jp/matrix.c b/keyboards/hhkb/jp/matrix.c
index c0dca6a990..81db77fca7 100644
--- a/keyboards/hhkb/jp/matrix.c
+++ b/keyboards/hhkb/jp/matrix.c
@@ -164,15 +164,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- if (matrix[i] != matrix_prev[i])
- return true;
- }
- return false;
-}
-
inline
bool matrix_has_ghost(void)
{
diff --git a/keyboards/hid_liber/matrix.c b/keyboards/hid_liber/matrix.c
index ff59a17153..da73c616d7 100755
--- a/keyboards/hid_liber/matrix.c
+++ b/keyboards/hid_liber/matrix.c
@@ -218,12 +218,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- // NOTE: no longer used
- return true;
-}
-
inline
bool matrix_has_ghost(void)
{
diff --git a/keyboards/honeycomb/config.h b/keyboards/honeycomb/config.h
index 725f9490cb..c959543618 100755
--- a/keyboards/honeycomb/config.h
+++ b/keyboards/honeycomb/config.h
@@ -45,12 +45,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/honeycomb/honeycomb.c b/keyboards/honeycomb/honeycomb.c
index 1254196d39..603400c7a3 100755
--- a/keyboards/honeycomb/honeycomb.c
+++ b/keyboards/honeycomb/honeycomb.c
@@ -7,7 +7,7 @@ void pointing_device_task(void){
uint32_t timeout = 0;
//the m character requests the RF slave to send the mouse report
- SERIAL_UART_DATA = 'm';
+ uart_write('m');
//trust the external inputs completely, erase old data
uint8_t uart_data[5] = {0};
@@ -17,7 +17,7 @@ void pointing_device_task(void){
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
xprintf("\r\nTIMED OUT");
@@ -25,7 +25,7 @@ void pointing_device_task(void){
}
}
xprintf("\r\nGOT DATA for %d",i);
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, bytes 1-4 are movement and scroll
diff --git a/keyboards/honeycomb/matrix.c b/keyboards/honeycomb/matrix.c
index 7fef6f0fd8..fe1e4ce8ff 100755
--- a/keyboards/honeycomb/matrix.c
+++ b/keyboards/honeycomb/matrix.c
@@ -30,7 +30,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "honeycomb.h"
#include "pointing_device.h"
#include "report.h"
-#include "protocol/serial.h"
+#include "uart.h"
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
@@ -95,7 +95,7 @@ uint8_t matrix_cols(void) {
void matrix_init(void) {
matrix_init_quantum();
- serial_init();
+ uart_init(1000000);
}
uint8_t matrix_scan(void)
@@ -103,7 +103,7 @@ uint8_t matrix_scan(void)
uint32_t timeout = 0;
// The 's' character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
// Trust the external keystates entirely, erase the last data
uint8_t uart_data[4] = {0};
@@ -113,14 +113,14 @@ uint8_t matrix_scan(void)
// Wait for the serial data, timeout if it's been too long
// This only happened in testing with a loose wire, but does no
// harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while(!uart_available()){
timeout++;
if (timeout > 10000){
xprintf("\r\nTime out in keyboard.");
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
// Check for the end packet, it's our checksum.
diff --git a/keyboards/honeycomb/rules.mk b/keyboards/honeycomb/rules.mk
index 2b5eb0360c..a6029e3dbf 100755
--- a/keyboards/honeycomb/rules.mk
+++ b/keyboards/honeycomb/rules.mk
@@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
# # project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/kinesis/alvicstep/matrix.c b/keyboards/kinesis/alvicstep/matrix.c
index 71619f8167..9c05374510 100644
--- a/keyboards/kinesis/alvicstep/matrix.c
+++ b/keyboards/kinesis/alvicstep/matrix.c
@@ -136,12 +136,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk
index 83d4fc590b..f0ff36fa35 100644
--- a/keyboards/massdrop/alt/rules.mk
+++ b/keyboards/massdrop/alt/rules.mk
@@ -5,6 +5,9 @@ SRC += config_led.c
ARM_ATSAM = SAMD51J18A
MCU = cortex-m4
+# Bootloader selection
+BOOTLOADER = md-boot
+
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk
index 667642f83d..a302c82d86 100644
--- a/keyboards/massdrop/ctrl/rules.mk
+++ b/keyboards/massdrop/ctrl/rules.mk
@@ -5,6 +5,9 @@ SRC += config_led.c
ARM_ATSAM = SAMD51J18A
MCU = cortex-m4
+# Bootloader selection
+BOOTLOADER = md-boot
+
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/matrix/m20add/m20add.c b/keyboards/matrix/m20add/m20add.c
index 21f4f9b1ba..4d328d6c54 100644
--- a/keyboards/matrix/m20add/m20add.c
+++ b/keyboards/matrix/m20add/m20add.c
@@ -53,25 +53,6 @@ bool led_update_kb(led_t led_state) {
return res;
}
-// override the default implementation to avoid re-initialization
-void i2c_init(void)
-{
- static bool initialized = false;
- if (initialized) {
- return;
- } else {
- initialized = true;
- }
-
- // Try releasing special pins for a short time
- palSetLineMode(I2C1_SCL_PIN, PAL_MODE_INPUT);
- palSetLineMode(I2C1_SDA_PIN, PAL_MODE_INPUT);
-
- chThdSleepMilliseconds(10);
- palSetLineMode(I2C1_SCL_PIN, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
- palSetLineMode(I2C1_SDA_PIN, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
-}
-
#define REBOOT_MAGIC 0x41544B42
void shutdown_user(void)
{
diff --git a/keyboards/mechlovin/olly/jf/rules.mk b/keyboards/mechlovin/olly/jf/rules.mk
index c0c9b2d7ea..2fafe64f12 100644
--- a/keyboards/mechlovin/olly/jf/rules.mk
+++ b/keyboards/mechlovin/olly/jf/rules.mk
@@ -5,7 +5,7 @@ MCU = atmega32a
F_CPU = 16000000
# Bootloader selection
-BOOTLOADER = USBasp
+BOOTLOADER = usbasploader
# Build Options
# change yes to no to disable
@@ -21,4 +21,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite
-SRC += matrix.c \ No newline at end of file
+SRC += matrix.c
diff --git a/keyboards/meira/matrix.c b/keyboards/meira/matrix.c
index ae1ae5ce9d..8e8e9485b4 100644
--- a/keyboards/meira/matrix.c
+++ b/keyboards/meira/matrix.c
@@ -161,12 +161,6 @@ uint8_t matrix_scan(void)
return ret;
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/mitosis/config.h b/keyboards/mitosis/config.h
index 94e84e680e..2c72eed5f2 100644
--- a/keyboards/mitosis/config.h
+++ b/keyboards/mitosis/config.h
@@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/mitosis/matrix.c b/keyboards/mitosis/matrix.c
index 71c372a3ce..a92c3e8431 100644
--- a/keyboards/mitosis/matrix.c
+++ b/keyboards/mitosis/matrix.c
@@ -15,80 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-void matrix_init(void) {
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -98,58 +39,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk
index 6c7aa30d88..0a8a31e7dd 100644
--- a/keyboards/mitosis/rules.mk
+++ b/keyboards/mitosis/rules.mk
@@ -8,14 +8,17 @@ BOOTLOADER = caterina
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
-UNICODE_ENABLE = yes # Unicode
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+UNICODE_ENABLE = yes
+CUSTOM_MATRIX = lite
-# # project specific files
-SRC += matrix.c serial_uart.c
+# project specific files
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/nek_type_a/matrix.c b/keyboards/nek_type_a/matrix.c
index a59598a503..b396be9911 100644
--- a/keyboards/nek_type_a/matrix.c
+++ b/keyboards/nek_type_a/matrix.c
@@ -205,14 +205,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/planck/keymaps/thermal_printer/config.h b/keyboards/planck/keymaps/thermal_printer/config.h
index 4ae9ced258..dd9d6a9d25 100644
--- a/keyboards/planck/keymaps/thermal_printer/config.h
+++ b/keyboards/planck/keymaps/thermal_printer/config.h
@@ -1,9 +1,4 @@
-#ifndef CONFIG_USER_H
-#define CONFIG_USER_H
-
-#include "../../config.h"
-
-#define SERIAL_UART_BAUD 19200
+#pragma once
/*
* MIDI options
@@ -21,8 +16,3 @@
- etc.
*/
//#define MIDI_ADVANCED
-
-/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
-//#define MIDI_TONE_KEYCODE_OCTAVES 2
-
- #endif \ No newline at end of file
diff --git a/keyboards/redox_w/config.h b/keyboards/redox_w/config.h
index b480b072f9..c4aeb32d58 100644
--- a/keyboards/redox_w/config.h
+++ b/keyboards/redox_w/config.h
@@ -55,12 +55,3 @@
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
-
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/redox_w/matrix.c b/keyboards/redox_w/matrix.c
index 703987a939..fd25231d9e 100644
--- a/keyboards/redox_w/matrix.c
+++ b/keyboards/redox_w/matrix.c
@@ -13,89 +13,21 @@
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-__attribute__ ((weak))
-void matrix_init_quantum(void) {
- matrix_init_kb();
-}
-
-__attribute__ ((weak))
-void matrix_scan_quantum(void) {
- matrix_scan_kb();
-}
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
-
-void matrix_init(void) {
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[11] = {0};
@@ -105,58 +37,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 7;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 7;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
-
- matrix_scan_quantum();
- return 1;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/redox_w/rules.mk b/keyboards/redox_w/rules.mk
index a8bd3a027a..8cb1736147 100644
--- a/keyboards/redox_w/rules.mk
+++ b/keyboards/redox_w/rules.mk
@@ -8,13 +8,16 @@ BOOTLOADER = caterina
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = yes # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Enable N-Key Rollover
-# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
+BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
+AUDIO_ENABLE = no # Audio output
+CUSTOM_MATRIX = lite
-# # project specific files
-SRC += matrix.c serial_uart.c
+# project specific files
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/redscarf_iiplus/verb/matrix.c b/keyboards/redscarf_iiplus/verb/matrix.c
index 42cfb7c037..88ecb586b3 100755
--- a/keyboards/redscarf_iiplus/verb/matrix.c
+++ b/keyboards/redscarf_iiplus/verb/matrix.c
@@ -94,13 +94,6 @@ uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
-//Deprecated.
-bool matrix_is_modified(void)
-{
- if (debounce_active()) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/redscarf_iiplus/verc/matrix.c b/keyboards/redscarf_iiplus/verc/matrix.c
index 42cfb7c037..88ecb586b3 100755
--- a/keyboards/redscarf_iiplus/verc/matrix.c
+++ b/keyboards/redscarf_iiplus/verc/matrix.c
@@ -94,13 +94,6 @@ uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
-//Deprecated.
-bool matrix_is_modified(void)
-{
- if (debounce_active()) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/redscarf_iiplus/verd/matrix.c b/keyboards/redscarf_iiplus/verd/matrix.c
index 78d1191b68..d9dbb3c0a3 100644
--- a/keyboards/redscarf_iiplus/verd/matrix.c
+++ b/keyboards/redscarf_iiplus/verd/matrix.c
@@ -94,13 +94,6 @@ uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
-//Deprecated.
-bool matrix_is_modified(void)
-{
- if (debounce_active()) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/rocketboard_16/rules.mk b/keyboards/rocketboard_16/rules.mk
index d27da2c226..c07ebff427 100644
--- a/keyboards/rocketboard_16/rules.mk
+++ b/keyboards/rocketboard_16/rules.mk
@@ -8,7 +8,7 @@ MCU = STM32F103
MCU_LDSCRIPT = STM32F103xB_stm32duino_bootloader
OPT_DEFS += -DBOOTLOADER_STM32DUINO
BOARD = STM32_F103_STM32DUINO
-STM32_BOOTLOADER_ADDRESS = 0x80000000
+BOOTLOADER_TYPE = stm32duino
DFU_ARGS = -d 1EAF:0003 -a 2 -R
DFU_SUFFIX_ARGS = -v 1EAF -p 0003
diff --git a/keyboards/sirius/uni660/rev1/config.h b/keyboards/sirius/uni660/rev1/config.h
index 91d7c5d7a3..f9815844cb 100644
--- a/keyboards/sirius/uni660/rev1/config.h
+++ b/keyboards/sirius/uni660/rev1/config.h
@@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
diff --git a/keyboards/sirius/uni660/rev1/matrix.c b/keyboards/sirius/uni660/rev1/matrix.c
index 2db6767a46..919db5c80d 100644
--- a/keyboards/sirius/uni660/rev1/matrix.c
+++ b/keyboards/sirius/uni660/rev1/matrix.c
@@ -15,83 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "debounce.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
-void matrix_init(void) {
- debounce_init(MATRIX_ROWS);
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
- bool matrix_has_changed = false;
-
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[17] = {0};
@@ -101,60 +39,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 8;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 8;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
- debounce(matrix, matrix, MATRIX_ROWS, matrix_has_changed);
-
- matrix_scan_quantum();
-
- return matrix_has_changed;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/sirius/uni660/rev1/rules.mk b/keyboards/sirius/uni660/rev1/rules.mk
index 836bf6b442..71cc3efd92 100644
--- a/keyboards/sirius/uni660/rev1/rules.mk
+++ b/keyboards/sirius/uni660/rev1/rules.mk
@@ -17,7 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
UNICODE_ENABLE = yes # Unicode
-CUSTOM_MATRIX = yes
+CUSTOM_MATRIX = lite
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
diff --git a/keyboards/sirius/uni660/rev2/ansi/config.h b/keyboards/sirius/uni660/rev2/ansi/config.h
index 13e33ebf11..8777dc4011 100644
--- a/keyboards/sirius/uni660/rev2/ansi/config.h
+++ b/keyboards/sirius/uni660/rev2/ansi/config.h
@@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
diff --git a/keyboards/sirius/uni660/rev2/iso/config.h b/keyboards/sirius/uni660/rev2/iso/config.h
index 3283f0cd67..763230dca8 100644
--- a/keyboards/sirius/uni660/rev2/iso/config.h
+++ b/keyboards/sirius/uni660/rev2/iso/config.h
@@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-//UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
-
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
diff --git a/keyboards/sirius/uni660/rev2/matrix.c b/keyboards/sirius/uni660/rev2/matrix.c
index 2db6767a46..919db5c80d 100644
--- a/keyboards/sirius/uni660/rev2/matrix.c
+++ b/keyboards/sirius/uni660/rev2/matrix.c
@@ -15,83 +15,21 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
-#include <stdint.h>
-#include <stdbool.h>
-#if defined(__AVR__)
-#include <avr/io.h>
-#endif
-#include "wait.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-#include "timer.h"
-#include "debounce.h"
-#include "protocol/serial.h"
-
-#if (MATRIX_COLS <= 8)
-# define print_matrix_header() print("\nr/c 01234567\n")
-# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop(matrix[i])
-# define ROW_SHIFTER ((uint8_t)1)
-#elif (MATRIX_COLS <= 16)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop16(matrix[i])
-# define ROW_SHIFTER ((uint16_t)1)
-#elif (MATRIX_COLS <= 32)
-# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
-# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
-# define matrix_bitpop(i) bitpop32(matrix[i])
-# define ROW_SHIFTER ((uint32_t)1)
-#endif
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-
-
-__attribute__ ((weak))
-void matrix_init_kb(void) {
- matrix_init_user();
-}
-
-__attribute__ ((weak))
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-inline
-uint8_t matrix_rows(void) {
- return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void) {
- return MATRIX_COLS;
-}
+#include "quantum.h"
+#include "matrix.h"
+#include "uart.h"
-void matrix_init(void) {
- debounce_init(MATRIX_ROWS);
- matrix_init_quantum();
- serial_init();
+void matrix_init_custom(void) {
+ uart_init(1000000);
}
-uint8_t matrix_scan(void)
-{
- bool matrix_has_changed = false;
-
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
uint32_t timeout = 0;
+ bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[17] = {0};
@@ -101,60 +39,27 @@ uint8_t matrix_scan(void)
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while(!SERIAL_UART_RXD_PRESENT){
+ while (!uart_available()) {
timeout++;
- if (timeout > 10000){
+ if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
//will only show up here if the correct bytes were recieved
- if (uart_data[10] == 0xE0)
- {
+ if (uart_data[10] == 0xE0) {
//shifting and transferring the keystates to the QMK matrix variable
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 8;
+ matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 8;
+ if (current_matrix[i] != current_row) {
+ changed = true;
+ }
+ current_matrix[i] = current_row;
}
}
- debounce(matrix, matrix, MATRIX_ROWS, matrix_has_changed);
-
- matrix_scan_quantum();
-
- return matrix_has_changed;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
- return (matrix[row] & ((matrix_row_t)1<<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
- return matrix[row];
-}
-
-void matrix_print(void)
-{
- print_matrix_header();
-
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- print_hex8(row); print(": ");
- print_matrix_row(row);
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void)
-{
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += matrix_bitpop(i);
- }
- return count;
+ return changed;
}
diff --git a/keyboards/sirius/uni660/rev2/rules.mk b/keyboards/sirius/uni660/rev2/rules.mk
index 0abebb07c6..850c2a2e35 100644
--- a/keyboards/sirius/uni660/rev2/rules.mk
+++ b/keyboards/sirius/uni660/rev2/rules.mk
@@ -17,9 +17,10 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output
UNICODE_ENABLE = yes # Unicode
-CUSTOM_MATRIX = yes
+CUSTOM_MATRIX = lite
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
DEFAULT_FOLDER = sirius/uni660/rev2/ansi
diff --git a/keyboards/sirius/unigo66/custom_matrix.cpp b/keyboards/sirius/unigo66/custom_matrix.cpp
index fba107c7cb..dfcf82c779 100644
--- a/keyboards/sirius/unigo66/custom_matrix.cpp
+++ b/keyboards/sirius/unigo66/custom_matrix.cpp
@@ -172,10 +172,6 @@ extern "C"
return 1;
}
- bool matrix_is_modified(void) {
- return matrix_is_mod;
- }
-
bool matrix_is_on(uint8_t row, uint8_t col) {
uint8_t code = CODE(row, col);
diff --git a/keyboards/sixkeyboard/matrix.c b/keyboards/sixkeyboard/matrix.c
index 64b46e9b0c..a6b28f3a12 100644
--- a/keyboards/sixkeyboard/matrix.c
+++ b/keyboards/sixkeyboard/matrix.c
@@ -114,11 +114,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/sx60/matrix.c b/keyboards/sx60/matrix.c
index b7dc25425d..231e1c8836 100644
--- a/keyboards/sx60/matrix.c
+++ b/keyboards/sx60/matrix.c
@@ -172,14 +172,6 @@ uint8_t matrix_scan(void)
return 1;
}
-bool matrix_is_modified(void)
-{
-#if (DEBOUNCE > 0)
- if (debouncing) return false;
-#endif
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/telophase/config.h b/keyboards/telophase/config.h
index 51718da9d4..837bb8ab9b 100644
--- a/keyboards/telophase/config.h
+++ b/keyboards/telophase/config.h
@@ -72,12 +72,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
-
-// UART settings for communication with the RF microcontroller
-#define SERIAL_UART_BAUD 1000000
-#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1))
-#define SERIAL_UART_INIT_CUSTOM \
- /* enable TX and RX */ \
- UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
- /* 8-bit data */ \
- UCSR1C = _BV(UCSZ11) | _BV(UCSZ10);
diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c
index a153dd4bf1..44b7e4c9e9 100644
--- a/keyboards/telophase/matrix.c
+++ b/keyboards/telophase/matrix.c
@@ -18,10 +18,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "quantum.h"
#include "matrix.h"
-#include "protocol/serial.h"
+#include "uart.h"
void matrix_init_custom(void) {
- serial_init();
+ uart_init(1000000);
}
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
@@ -29,7 +29,7 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
bool changed = false;
//the s character requests the RF slave to send the matrix
- SERIAL_UART_DATA = 's';
+ uart_write('s');
//trust the external keystates entirely, erase the last data
uint8_t uart_data[13] = {0};
@@ -39,13 +39,13 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) {
//wait for the serial data, timeout if it's been too long
//this only happened in testing with a loose wire, but does no
//harm to leave it in here
- while (!SERIAL_UART_RXD_PRESENT) {
+ while (!uart_available()) {
timeout++;
if (timeout > 10000) {
break;
}
}
- uart_data[i] = SERIAL_UART_DATA;
+ uart_data[i] = uart_read();
}
//check for the end packet, the key state bytes use the LSBs, so 0xE0
diff --git a/keyboards/telophase/rules.mk b/keyboards/telophase/rules.mk
index c3a8aaf79f..41a6ee25f5 100644
--- a/keyboards/telophase/rules.mk
+++ b/keyboards/telophase/rules.mk
@@ -19,7 +19,8 @@ AUDIO_ENABLE = no # Audio output
CUSTOM_MATRIX = lite
# project specific files
-SRC += matrix.c serial_uart.c
+SRC += matrix.c
+QUANTUM_LIB_SRC += uart.c
# Disable unsupported hardware
RGBLIGHT_SUPPORTED = no
diff --git a/keyboards/tgr/jane/v2ce/rules.mk b/keyboards/tgr/jane/v2ce/rules.mk
index 0a865321a6..8fcc8d911f 100644
--- a/keyboards/tgr/jane/v2ce/rules.mk
+++ b/keyboards/tgr/jane/v2ce/rules.mk
@@ -2,7 +2,7 @@
MCU = atmega32a
# Bootloader selection
-BOOTLOADER = bootloadHID
+BOOTLOADER = bootloadhid
# Build Options
# change yes to no to disable
diff --git a/keyboards/thedogkeyboard/matrix.c b/keyboards/thedogkeyboard/matrix.c
index 474fbec030..2851859cf2 100644
--- a/keyboards/thedogkeyboard/matrix.c
+++ b/keyboards/thedogkeyboard/matrix.c
@@ -90,13 +90,6 @@ uint8_t matrix_cols(void) {
return MATRIX_COLS;
}
-//Deprecated.
-bool matrix_is_modified(void)
-{
- if (debounce_active()) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/keyboards/yanghu/unicorne/config.h b/keyboards/yanghu/unicorne/config.h
index 652afeb3b4..27d21c7906 100644
--- a/keyboards/yanghu/unicorne/config.h
+++ b/keyboards/yanghu/unicorne/config.h
@@ -42,6 +42,12 @@
#define ENCODERS_PAD_B \
{ B12, B0 }
+/* I2C - required for custom i2c_init */
+#define I2C1_SCL_PIN B6
+#define I2C1_SDA_PIN B7
+#define I2C1_SCL_PAL_MODE 4
+#define I2C1_SDA_PAL_MODE 4
+
/* Audio */
#define AUDIO_PIN A8
#define AUDIO_PWM_PAL_MODE 1
diff --git a/keyboards/yosino58/rev1/matrix.c b/keyboards/yosino58/rev1/matrix.c
index 3db40b3829..e2be7113bf 100644
--- a/keyboards/yosino58/rev1/matrix.c
+++ b/keyboards/yosino58/rev1/matrix.c
@@ -289,12 +289,6 @@ void matrix_slave_scan(void) {
#endif
}
-bool matrix_is_modified(void)
-{
- if (debouncing) return false;
- return true;
-}
-
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
diff --git a/lib/python/qmk/cli/generate/develop_pr_list.py b/lib/python/qmk/cli/generate/develop_pr_list.py
index 07e46752a6..fab0262773 100755
--- a/lib/python/qmk/cli/generate/develop_pr_list.py
+++ b/lib/python/qmk/cli/generate/develop_pr_list.py
@@ -97,7 +97,7 @@ def generate_develop_pr_list(cli):
match = git_expr.search(line)
if match:
pr_info = _get_pr_info(cache, gh, match.group("pr"))
- commit_info = {'hash': match.group("hash"), 'title': match.group("title"), 'pr_num': int(match.group("pr")), 'pr_labels': [label.name for label in pr_info.labels.items]}
+ commit_info = {'hash': match.group("hash"), 'title': pr_info['title'], 'pr_num': int(match.group("pr")), 'pr_labels': [label.name for label in pr_info.labels.items]}
_categorise_commit(commit_info)
def _dump_commit_list(name, collection):
diff --git a/platforms/arm_atsam/bootloader.c b/platforms/arm_atsam/bootloaders/md_boot.c
index 9015b00aab..e7508ffe51 100644
--- a/platforms/arm_atsam/bootloader.c
+++ b/platforms/arm_atsam/bootloaders/md_boot.c
@@ -15,13 +15,18 @@
*/
#include "bootloader.h"
+
#include "samd51j18a.h"
-#include "md_bootloader.h"
-// Set watchdog timer to reset. Directs the bootloader to stay in programming mode.
-void bootloader_jump(void) {
#ifdef KEYBOARD_massdrop_ctrl
- // CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method.
+// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support
+extern uint32_t _eram;
+
+# define BOOTLOADER_MAGIC 0x3B9ACA00
+# define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4)
+
+// CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method.
+void bootloader_jump(void) {
uint8_t ver_ram_method[] = "v2.18Jun 22 2018 17:28:08"; // The version to match (NULL terminated by compiler)
uint8_t *ver_check = ver_ram_method; // Pointer to version match string for traversal
uint8_t *ver_rom = (uint8_t *)0x21A0; // Pointer to address in ROM where this specific bootloader version would exist
@@ -34,24 +39,34 @@ void bootloader_jump(void) {
if (!*ver_check) { // If check version pointer is NULL, all characters have matched
*MAGIC_ADDR = BOOTLOADER_MAGIC; // Set magic number into RAM
NVIC_SystemReset(); // Perform system reset
- while (1) {
- } // Won't get here
+
+ while (1)
+ ; // Won't get here
}
-#endif
+}
+#else
+
+// Set watchdog timer to reset. Directs the bootloader to stay in programming mode.
+void bootloader_jump(void) {
WDT->CTRLA.bit.ENABLE = 0;
- while (WDT->SYNCBUSY.bit.ENABLE) {
- }
- while (WDT->CTRLA.bit.ENABLE) {
- }
+
+ while (WDT->SYNCBUSY.bit.ENABLE)
+ ;
+ while (WDT->CTRLA.bit.ENABLE)
+ ;
+
WDT->CONFIG.bit.WINDOW = 0;
WDT->CONFIG.bit.PER = 0;
WDT->EWCTRL.bit.EWOFFSET = 0;
WDT->CTRLA.bit.ENABLE = 1;
- while (WDT->SYNCBUSY.bit.ENABLE) {
- }
- while (!WDT->CTRLA.bit.ENABLE) {
- }
- while (1) {
- } // Wait on timeout
+
+ while (WDT->SYNCBUSY.bit.ENABLE)
+ ;
+ while (!WDT->CTRLA.bit.ENABLE)
+ ;
+
+ while (1)
+ ; // Wait on timeout
}
+#endif
diff --git a/platforms/arm_atsam/gpio.h b/platforms/arm_atsam/gpio.h
index 915ed0ef4f..a42aaff54d 100644
--- a/platforms/arm_atsam/gpio.h
+++ b/platforms/arm_atsam/gpio.h
@@ -22,9 +22,9 @@
typedef uint8_t pin_t;
-#define SAMD_PORT(pin) ((pin & 0x20) >> 5)
-#define SAMD_PIN(pin) (pin & 0x1f)
-#define SAMD_PIN_MASK(pin) (1 << (pin & 0x1f))
+#define SAMD_PORT(pin) (((pin)&0x20) >> 5)
+#define SAMD_PIN(pin) ((pin)&0x1f)
+#define SAMD_PIN_MASK(pin) (1 << ((pin)&0x1f))
#define setPinInput(pin) \
do { \
@@ -48,12 +48,16 @@ typedef uint8_t pin_t;
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.PULLEN = 1; \
} while (0)
-#define setPinOutput(pin) \
+#define setPinOutputPushPull(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].DIRSET.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
+#define setPinOutputOpenDrain(pin) _Static_assert(0, "arm_atsam platform does not implement an open-drain output")
+
+#define setPinOutput(pin) setPinOutputPushPull(pin)
+
#define writePinHigh(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \
diff --git a/platforms/avr/bootloader.c b/platforms/avr/bootloader.c
deleted file mode 100644
index c0272903b8..0000000000
--- a/platforms/avr/bootloader.c
+++ /dev/null
@@ -1,293 +0,0 @@
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <avr/eeprom.h>
-#include <avr/interrupt.h>
-#include <avr/wdt.h>
-#include <util/delay.h>
-#include "bootloader.h"
-#include <avr/boot.h>
-
-#ifdef PROTOCOL_LUFA
-# include <LUFA/Drivers/USB/USB.h>
-#endif
-
-/** \brief Bootloader Size in *bytes*
- *
- * AVR Boot section size are defined by setting BOOTSZ fuse in fact. Consult with your MCU datasheet.
- * Note that 'Word'(2 bytes) size and address are used in datasheet while TMK uses 'Byte'.
- *
- * Size of Bootloaders in bytes:
- * Atmel DFU loader(ATmega32U4) 4096
- * Atmel DFU loader(AT90USB128) 8192
- * LUFA bootloader(ATmega32U4) 4096
- * Arduino Caterina(ATmega32U4) 4096
- * USBaspLoader(ATmega***) 2048
- * Teensy halfKay(ATmega32U4) 512
- * Teensy++ halfKay(AT90USB128) 1024
- *
- * AVR Boot section is located at the end of Flash memory like the followings.
- *
- * byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB128)
- * 0x0000 +---------------+ 0x00000 +---------------+
- * | | | |
- * | | | |
- * | Application | | Application |
- * | | | |
- * = = = =
- * | | 32KB-4KB | | 128KB-8KB
- * 0x7000 +---------------+ 0x1E000 +---------------+
- * | Bootloader | 4KB | Bootloader | 8KB
- * 0x7FFF +---------------+ 0x1FFFF +---------------+
- *
- *
- * byte Teensy(ATMega32u4) byte Teensy++(AT90SUB128)
- * 0x0000 +---------------+ 0x00000 +---------------+
- * | | | |
- * | | | |
- * | Application | | Application |
- * | | | |
- * = = = =
- * | | 32KB-512B | | 128KB-1KB
- * 0x7E00 +---------------+ 0x1FC00 +---------------+
- * | Bootloader | 512B | Bootloader | 1KB
- * 0x7FFF +---------------+ 0x1FFFF +---------------+
- */
-#define FLASH_SIZE (FLASHEND + 1L)
-
-#if !defined(BOOTLOADER_SIZE)
-uint16_t bootloader_start;
-#endif
-
-// compatibility between ATMega8 and ATMega88
-#if !defined(MCUCSR)
-# if defined(MCUSR)
-# define MCUCSR MCUSR
-# endif
-#endif
-
-/** \brief Entering the Bootloader via Software
- *
- * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
- */
-#define BOOTLOADER_RESET_KEY 0xB007B007
-uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;")));
-
-/** \brief initialize MCU status by watchdog reset
- *
- * FIXME: needs doc
- */
-__attribute__((weak)) void bootloader_jump(void) {
-#if !defined(BOOTLOADER_SIZE)
- uint8_t high_fuse = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS);
-
- if (high_fuse & ~(FUSE_BOOTSZ0 & FUSE_BOOTSZ1)) {
- bootloader_start = (FLASH_SIZE - 512) >> 1;
- } else if (high_fuse & ~(FUSE_BOOTSZ1)) {
- bootloader_start = (FLASH_SIZE - 1024) >> 1;
- } else if (high_fuse & ~(FUSE_BOOTSZ0)) {
- bootloader_start = (FLASH_SIZE - 2048) >> 1;
- } else {
- bootloader_start = (FLASH_SIZE - 4096) >> 1;
- }
-#endif
-
- // Something like this might work, but it compiled larger than the block above
- // bootloader_start = FLASH_SIZE - (256 << (~high_fuse & 0b110 >> 1));
-
-#if defined(BOOTLOADER_HALFKAY)
- // http://www.pjrc.com/teensy/jump_to_bootloader.html
- cli();
- // disable watchdog, if enabled (it's not)
- // disable all peripherals
- // a shutdown call might make sense here
- UDCON = 1;
- USBCON = (1 << FRZCLK); // disable USB
- UCSR1B = 0;
- _delay_ms(5);
-# if defined(__AVR_AT90USB162__) // Teensy 1.0
- EIMSK = 0;
- PCICR = 0;
- SPCR = 0;
- ACSR = 0;
- EECR = 0;
- TIMSK0 = 0;
- TIMSK1 = 0;
- UCSR1B = 0;
- DDRB = 0;
- DDRC = 0;
- DDRD = 0;
- PORTB = 0;
- PORTC = 0;
- PORTD = 0;
- asm volatile("jmp 0x3E00");
-# elif defined(__AVR_ATmega32U4__) // Teensy 2.0
- EIMSK = 0;
- PCICR = 0;
- SPCR = 0;
- ACSR = 0;
- EECR = 0;
- ADCSRA = 0;
- TIMSK0 = 0;
- TIMSK1 = 0;
- TIMSK3 = 0;
- TIMSK4 = 0;
- UCSR1B = 0;
- TWCR = 0;
- DDRB = 0;
- DDRC = 0;
- DDRD = 0;
- DDRE = 0;
- DDRF = 0;
- TWCR = 0;
- PORTB = 0;
- PORTC = 0;
- PORTD = 0;
- PORTE = 0;
- PORTF = 0;
- asm volatile("jmp 0x7E00");
-# elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
- EIMSK = 0;
- PCICR = 0;
- SPCR = 0;
- ACSR = 0;
- EECR = 0;
- ADCSRA = 0;
- TIMSK0 = 0;
- TIMSK1 = 0;
- TIMSK2 = 0;
- TIMSK3 = 0;
- UCSR1B = 0;
- TWCR = 0;
- DDRA = 0;
- DDRB = 0;
- DDRC = 0;
- DDRD = 0;
- DDRE = 0;
- DDRF = 0;
- PORTA = 0;
- PORTB = 0;
- PORTC = 0;
- PORTD = 0;
- PORTE = 0;
- PORTF = 0;
- asm volatile("jmp 0xFC00");
-# elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
- EIMSK = 0;
- PCICR = 0;
- SPCR = 0;
- ACSR = 0;
- EECR = 0;
- ADCSRA = 0;
- TIMSK0 = 0;
- TIMSK1 = 0;
- TIMSK2 = 0;
- TIMSK3 = 0;
- UCSR1B = 0;
- TWCR = 0;
- DDRA = 0;
- DDRB = 0;
- DDRC = 0;
- DDRD = 0;
- DDRE = 0;
- DDRF = 0;
- PORTA = 0;
- PORTB = 0;
- PORTC = 0;
- PORTD = 0;
- PORTE = 0;
- PORTF = 0;
- asm volatile("jmp 0x1FC00");
-# endif
-
-#elif defined(BOOTLOADER_CATERINA)
- // this block may be optional
- // TODO: figure it out
-
- uint16_t *const bootKeyPtr = (uint16_t *)0x0800;
-
- // Value used by Caterina bootloader use to determine whether to run the
- // sketch or the bootloader programmer.
- uint16_t bootKey = 0x7777;
-
- *bootKeyPtr = bootKey;
-
- // setup watchdog timeout
- wdt_enable(WDTO_60MS);
-
- while (1) {
- } // wait for watchdog timer to trigger
-
-#elif defined(BOOTLOADER_USBASP)
- // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c
- wdt_enable(WDTO_15MS);
- wdt_reset();
- asm volatile("cli \n\t"
- "ldi r29 , %[ramendhi] \n\t"
- "ldi r28 , %[ramendlo] \n\t"
-# if (FLASHEND > 131071)
- "ldi r18 , %[bootaddrhi] \n\t"
- "st Y+, r18 \n\t"
-# endif
- "ldi r18 , %[bootaddrme] \n\t"
- "st Y+, r18 \n\t"
- "ldi r18 , %[bootaddrlo] \n\t"
- "st Y+, r18 \n\t"
- "out %[mcucsrio], __zero_reg__ \n\t"
- "bootloader_startup_loop%=: \n\t"
- "rjmp bootloader_startup_loop%= \n\t"
- :
- : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)),
-# if (FLASHEND > 131071)
- [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff),
-# else
- [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff),
-# endif
- [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff));
-
-#else // Assume remaining boards are DFU, even if the flag isn't set
-
-# if !(defined(__AVR_ATmega32A__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATtiny85__)) // no USB - maybe BOOTLOADER_BOOTLOADHID instead though?
- UDCON = 1;
- USBCON = (1 << FRZCLK); // disable USB
- UCSR1B = 0;
- _delay_ms(5); // 5 seems to work fine
-# endif
-
-# ifdef BOOTLOADER_BOOTLOADHID
- // force bootloadHID to stay in bootloader mode, so that it waits
- // for a new firmware to be flashed
- eeprom_write_byte((uint8_t *)1, 0x00);
-# endif
-
- // watchdog reset
- reset_key = BOOTLOADER_RESET_KEY;
- wdt_enable(WDTO_250MS);
- for (;;)
- ;
-#endif
-}
-
-/* this runs before main() */
-void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3")));
-void bootloader_jump_after_watchdog_reset(void) {
-#ifndef BOOTLOADER_HALFKAY
- if ((MCUCSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
- reset_key = 0;
-
- // My custom USBasploader requires this to come up.
- MCUCSR = 0;
-
- // Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog.
- MCUCSR &= ~(1 << WDRF);
- wdt_disable();
-
-// This is compled into 'icall', address should be in word unit, not byte.
-# ifdef BOOTLOADER_SIZE
- ((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))();
-# else
- asm("ijmp" ::"z"(bootloader_start));
-# endif
- }
-#endif
-}
diff --git a/platforms/avr/bootloaders/bootloadhid.c b/platforms/avr/bootloaders/bootloadhid.c
new file mode 100644
index 0000000000..ae58760d7d
--- /dev/null
+++ b/platforms/avr/bootloaders/bootloadhid.c
@@ -0,0 +1,33 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/eeprom.h>
+#include <avr/wdt.h>
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // force bootloadHID to stay in bootloader mode, so that it waits
+ // for a new firmware to be flashed
+ // NOTE: this byte is part of QMK's "magic number" - changing it causes the EEPROM to be re-initialized
+ // thus every time the device is flashed the EEPROM will be wiped
+ eeprom_write_byte((uint8_t *)1, 0x00);
+
+ // watchdog reset
+ wdt_enable(WDTO_250MS);
+ for (;;)
+ ;
+}
diff --git a/platforms/avr/bootloaders/caterina.c b/platforms/avr/bootloaders/caterina.c
new file mode 100644
index 0000000000..82a16a3765
--- /dev/null
+++ b/platforms/avr/bootloaders/caterina.c
@@ -0,0 +1,39 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/wdt.h>
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // this block may be optional
+ // TODO: figure it out
+
+ uint16_t *const bootKeyPtr = (uint16_t *)0x0800;
+
+ // Value used by Caterina bootloader use to determine whether to run the
+ // sketch or the bootloader programmer.
+ uint16_t bootKey = 0x7777;
+
+ *bootKeyPtr = bootKey;
+
+ // setup watchdog timeout
+ wdt_enable(WDTO_60MS);
+
+ // wait for watchdog timer to trigger
+ while (1) {
+ }
+}
diff --git a/platforms/avr/bootloaders/dfu.c b/platforms/avr/bootloaders/dfu.c
new file mode 100644
index 0000000000..cb42821a93
--- /dev/null
+++ b/platforms/avr/bootloaders/dfu.c
@@ -0,0 +1,52 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/wdt.h>
+#include <util/delay.h>
+
+#define FLASH_SIZE (FLASHEND + 1L)
+
+/** \brief Entering the Bootloader via Software
+ *
+ * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
+ */
+#define BOOTLOADER_RESET_KEY 0xB007B007
+uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;")));
+
+__attribute__((weak)) void bootloader_jump(void) {
+ UDCON = 1;
+ USBCON = (1 << FRZCLK); // disable USB
+ UCSR1B = 0;
+ _delay_ms(5); // 5 seems to work fine
+
+ // watchdog reset
+ reset_key = BOOTLOADER_RESET_KEY;
+ wdt_enable(WDTO_250MS);
+ for (;;)
+ ;
+}
+
+/* this runs before main() */
+void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3")));
+void bootloader_jump_after_watchdog_reset(void) {
+ if ((MCUSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) {
+ reset_key = 0;
+
+ ((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))();
+ }
+}
diff --git a/platforms/avr/bootloaders/halfkay.c b/platforms/avr/bootloaders/halfkay.c
new file mode 100644
index 0000000000..6ce2e19114
--- /dev/null
+++ b/platforms/avr/bootloaders/halfkay.c
@@ -0,0 +1,128 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/interrupt.h>
+#include <util/delay.h>
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // http://www.pjrc.com/teensy/jump_to_bootloader.html
+
+ cli();
+ // disable watchdog, if enabled (it's not)
+ // disable all peripherals
+ // a shutdown call might make sense here
+ UDCON = 1;
+ USBCON = (1 << FRZCLK); // disable USB
+ UCSR1B = 0;
+ _delay_ms(5);
+
+#if defined(__AVR_AT90USB162__) // Teensy 1.0
+ EIMSK = 0;
+ PCICR = 0;
+ SPCR = 0;
+ ACSR = 0;
+ EECR = 0;
+ TIMSK0 = 0;
+ TIMSK1 = 0;
+ UCSR1B = 0;
+ DDRB = 0;
+ DDRC = 0;
+ DDRD = 0;
+ PORTB = 0;
+ PORTC = 0;
+ PORTD = 0;
+ asm volatile("jmp 0x3E00");
+#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
+ EIMSK = 0;
+ PCICR = 0;
+ SPCR = 0;
+ ACSR = 0;
+ EECR = 0;
+ ADCSRA = 0;
+ TIMSK0 = 0;
+ TIMSK1 = 0;
+ TIMSK3 = 0;
+ TIMSK4 = 0;
+ UCSR1B = 0;
+ TWCR = 0;
+ DDRB = 0;
+ DDRC = 0;
+ DDRD = 0;
+ DDRE = 0;
+ DDRF = 0;
+ TWCR = 0;
+ PORTB = 0;
+ PORTC = 0;
+ PORTD = 0;
+ PORTE = 0;
+ PORTF = 0;
+ asm volatile("jmp 0x7E00");
+#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
+ EIMSK = 0;
+ PCICR = 0;
+ SPCR = 0;
+ ACSR = 0;
+ EECR = 0;
+ ADCSRA = 0;
+ TIMSK0 = 0;
+ TIMSK1 = 0;
+ TIMSK2 = 0;
+ TIMSK3 = 0;
+ UCSR1B = 0;
+ TWCR = 0;
+ DDRA = 0;
+ DDRB = 0;
+ DDRC = 0;
+ DDRD = 0;
+ DDRE = 0;
+ DDRF = 0;
+ PORTA = 0;
+ PORTB = 0;
+ PORTC = 0;
+ PORTD = 0;
+ PORTE = 0;
+ PORTF = 0;
+ asm volatile("jmp 0xFC00");
+#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
+ EIMSK = 0;
+ PCICR = 0;
+ SPCR = 0;
+ ACSR = 0;
+ EECR = 0;
+ ADCSRA = 0;
+ TIMSK0 = 0;
+ TIMSK1 = 0;
+ TIMSK2 = 0;
+ TIMSK3 = 0;
+ UCSR1B = 0;
+ TWCR = 0;
+ DDRA = 0;
+ DDRB = 0;
+ DDRC = 0;
+ DDRD = 0;
+ DDRE = 0;
+ DDRF = 0;
+ PORTA = 0;
+ PORTB = 0;
+ PORTC = 0;
+ PORTD = 0;
+ PORTE = 0;
+ PORTF = 0;
+ asm volatile("jmp 0x1FC00");
+#endif
+}
diff --git a/platforms/avr/bootloaders/none.c b/platforms/avr/bootloaders/none.c
new file mode 100644
index 0000000000..624fbe242a
--- /dev/null
+++ b/platforms/avr/bootloaders/none.c
@@ -0,0 +1,19 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+__attribute__((weak)) void bootloader_jump(void) {}
diff --git a/platforms/avr/bootloaders/usbasploader.c b/platforms/avr/bootloaders/usbasploader.c
new file mode 100644
index 0000000000..008bd16069
--- /dev/null
+++ b/platforms/avr/bootloaders/usbasploader.c
@@ -0,0 +1,56 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <avr/wdt.h>
+
+#define FLASH_SIZE (FLASHEND + 1L)
+
+#if !defined(MCUCSR)
+# if defined(MCUSR)
+# define MCUCSR MCUSR
+# endif
+#endif
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c
+
+ wdt_enable(WDTO_15MS);
+ wdt_reset();
+ asm volatile("cli \n\t"
+ "ldi r29 , %[ramendhi] \n\t"
+ "ldi r28 , %[ramendlo] \n\t"
+#if (FLASHEND > 131071)
+ "ldi r18 , %[bootaddrhi] \n\t"
+ "st Y+, r18 \n\t"
+#endif
+ "ldi r18 , %[bootaddrme] \n\t"
+ "st Y+, r18 \n\t"
+ "ldi r18 , %[bootaddrlo] \n\t"
+ "st Y+, r18 \n\t"
+ "out %[mcucsrio], __zero_reg__ \n\t"
+ "bootloader_startup_loop%=: \n\t"
+ "rjmp bootloader_startup_loop%= \n\t"
+ :
+ : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)),
+#if (FLASHEND > 131071)
+ [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff),
+#else
+ [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff),
+#endif
+ [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff));
+}
diff --git a/platforms/avr/drivers/i2c_master.c b/platforms/avr/drivers/i2c_master.c
index 111b55d6b0..d4024378ca 100644
--- a/platforms/avr/drivers/i2c_master.c
+++ b/platforms/avr/drivers/i2c_master.c
@@ -32,6 +32,9 @@
# define I2C_START_RETRY_COUNT 20
#endif // I2C_START_RETRY_COUNT
+#define I2C_ACTION_READ 0x01
+#define I2C_ACTION_WRITE 0x00
+
#define TWBR_val (((F_CPU / F_SCL) - 16) / 2)
#define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
@@ -154,7 +157,7 @@ int16_t i2c_read_nack(uint16_t timeout) {
}
i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
- i2c_status_t status = i2c_start(address | I2C_WRITE, timeout);
+ i2c_status_t status = i2c_start(address | I2C_ACTION_WRITE, timeout);
for (uint16_t i = 0; i < length && status >= 0; i++) {
status = i2c_write(data[i], timeout);
@@ -166,7 +169,7 @@ i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length,
}
i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
- i2c_status_t status = i2c_start(address | I2C_READ, timeout);
+ i2c_status_t status = i2c_start(address | I2C_ACTION_READ, timeout);
for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) {
status = i2c_read_ack(timeout);
diff --git a/platforms/avr/drivers/serial.c b/platforms/avr/drivers/serial.c
index 9a7345a53d..ab0b52afd1 100644
--- a/platforms/avr/drivers/serial.c
+++ b/platforms/avr/drivers/serial.c
@@ -16,6 +16,7 @@
#include <util/delay.h>
#include <stddef.h>
#include <stdbool.h>
+#include "gpio.h"
#include "serial.h"
#ifdef SOFT_SERIAL_PIN
@@ -119,12 +120,6 @@
# error invalid SOFT_SERIAL_PIN value
# endif
-# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
-# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
-# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
-
# define ALWAYS_INLINE __attribute__((always_inline))
# define NO_INLINE __attribute__((noinline))
# define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
diff --git a/platforms/avr/gpio.h b/platforms/avr/gpio.h
index e9be68491d..95f15c28dc 100644
--- a/platforms/avr/gpio.h
+++ b/platforms/avr/gpio.h
@@ -25,7 +25,9 @@ typedef uint8_t pin_t;
#define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
#define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
#define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low")
-#define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+#define setPinOutputPushPull(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
+#define setPinOutputOpenDrain(pin) _Static_assert(0, "AVR platform does not implement an open-drain output")
+#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
#define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
@@ -34,16 +36,3 @@ typedef uint8_t pin_t;
#define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
#define togglePin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF))
-
-/* Operation of GPIO by port. */
-
-typedef uint8_t port_data_t;
-
-#define readPort(port) PINx_ADDRESS(port)
-
-#define setPortBitInput(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) &= ~_BV((bit)&0xF))
-#define setPortBitInputHigh(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) |= _BV((bit)&0xF))
-#define setPortBitOutput(port, bit) (DDRx_ADDRESS(port) |= _BV((bit)&0xF))
-
-#define writePortBitLow(port, bit) (PORTx_ADDRESS(port) &= ~_BV((bit)&0xF))
-#define writePortBitHigh(port, bit) (PORTx_ADDRESS(port) |= _BV((bit)&0xF))
diff --git a/platforms/chibios/bootloader.c b/platforms/chibios/bootloader.c
deleted file mode 100644
index 58212948b0..0000000000
--- a/platforms/chibios/bootloader.c
+++ /dev/null
@@ -1,145 +0,0 @@
-#include "bootloader.h"
-
-#include <ch.h>
-#include <hal.h>
-#include "wait.h"
-
-/* This code should be checked whether it runs correctly on platforms */
-#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
-#define BOOTLOADER_MAGIC 0xDEADBEEF
-#define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4)
-
-#ifndef STM32_BOOTLOADER_DUAL_BANK
-# define STM32_BOOTLOADER_DUAL_BANK FALSE
-#endif
-
-#ifdef BOOTLOADER_TINYUF2
-
-# define DBL_TAP_MAGIC 0xf01669ef // From tinyuf2's board_api.h
-
-// defined by linker script
-extern uint32_t _board_dfu_dbl_tap[];
-# define DBL_TAP_REG _board_dfu_dbl_tap[0]
-
-void bootloader_jump(void) {
- DBL_TAP_REG = DBL_TAP_MAGIC;
- NVIC_SystemReset();
-}
-
-void enter_bootloader_mode_if_requested(void) { /* not needed, no two-stage reset */
-}
-
-#elif STM32_BOOTLOADER_DUAL_BANK
-
-// Need pin definitions
-# include "config_common.h"
-
-# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO
-# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle"
-# endif
-
-# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY
-# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0
-# endif
-
-# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY
-# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000
-# endif
-
-extern uint32_t __ram0_end__;
-
-__attribute__((weak)) void bootloader_jump(void) {
- // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash
- // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do
- // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to
- // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord
- // #hardware channel pins for an example circuit.
- palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL);
-# if STM32_BOOTLOADER_DUAL_BANK_POLARITY
- palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
-# else
- palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
-# endif
-
- // Wait for a while for the capacitor to charge
- wait_ms(100);
-
- // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high
- NVIC_SystemReset();
-}
-
-void enter_bootloader_mode_if_requested(void) {} // not needed at all, but if anybody attempts to invoke it....
-
-#elif defined(STM32_BOOTLOADER_ADDRESS) // STM32_BOOTLOADER_DUAL_BANK
-
-extern uint32_t __ram0_end__;
-
-__attribute__((weak)) void bootloader_jump(void) {
- *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
- NVIC_SystemReset();
-}
-
-void enter_bootloader_mode_if_requested(void) {
- unsigned long *check = MAGIC_ADDR;
- if (*check == BOOTLOADER_MAGIC) {
- *check = 0;
- __set_CONTROL(0);
- __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS);
- __enable_irq();
-
- typedef void (*BootJump_t)(void);
- BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4);
- boot_jump();
- while (1)
- ;
- }
-}
-
-#elif defined(GD32VF103)
-
-# define DBGMCU_KEY_UNLOCK 0x4B5A6978
-# define DBGMCU_CMD_RESET 0x1
-
-__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU;
-__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U;
-
-__attribute__((weak)) void bootloader_jump(void) {
- /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST
- * register to generate a software reset request.
- * BUT instead two undocumented registers in the debug peripheral
- * that allow issueing a software reset. WHO would need the MSFRST
- * register anyway? Source:
- * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */
- *DBGMCU_KEY = DBGMCU_KEY_UNLOCK;
- *DBGMCU_CMD = DBGMCU_CMD_RESET;
-}
-
-void enter_bootloader_mode_if_requested(void) { /* Jumping to bootloader is not possible from user code. */
-}
-
-#elif defined(KL2x) || defined(K20x) || defined(MK66F18) || defined(MIMXRT1062) // STM32_BOOTLOADER_DUAL_BANK // STM32_BOOTLOADER_ADDRESS
-/* Kinetis */
-
-# if defined(BOOTLOADER_KIIBOHD)
-/* Kiibohd Bootloader (MCHCK and Infinity KB) */
-# define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000
-const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00";
-__attribute__((weak)) void bootloader_jump(void) {
- void *volatile vbat = (void *)VBAT;
- __builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic));
- // request reset
- SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk;
-}
-
-# else /* defined(BOOTLOADER_KIIBOHD) */
-/* Default for Kinetis - expecting an ARM Teensy */
-# include "wait.h"
-__attribute__((weak)) void bootloader_jump(void) {
- wait_ms(100);
- __BKPT(0);
-}
-# endif /* defined(BOOTLOADER_KIIBOHD) */
-
-#else /* neither STM32 nor KINETIS */
-__attribute__((weak)) void bootloader_jump(void) {}
-#endif
diff --git a/platforms/chibios/bootloaders/gd32v_dfu.c b/platforms/chibios/bootloaders/gd32v_dfu.c
new file mode 100644
index 0000000000..7a979638e3
--- /dev/null
+++ b/platforms/chibios/bootloaders/gd32v_dfu.c
@@ -0,0 +1,39 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+
+#define DBGMCU_KEY_UNLOCK 0x4B5A6978
+#define DBGMCU_CMD_RESET 0x1
+
+__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU;
+__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U;
+
+__attribute__((weak)) void bootloader_jump(void) {
+ /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST
+ * register to generate a software reset request.
+ * BUT instead two undocumented registers in the debug peripheral
+ * that allow issueing a software reset. WHO would need the MSFRST
+ * register anyway? Source:
+ * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */
+ *DBGMCU_KEY = DBGMCU_KEY_UNLOCK;
+ *DBGMCU_CMD = DBGMCU_CMD_RESET;
+}
+
+/* Jumping to bootloader is not possible from user code. */
+void enter_bootloader_mode_if_requested(void) {}
diff --git a/platforms/chibios/bootloaders/halfkay.c b/platforms/chibios/bootloaders/halfkay.c
new file mode 100644
index 0000000000..168c2abc23
--- /dev/null
+++ b/platforms/chibios/bootloaders/halfkay.c
@@ -0,0 +1,25 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+#include "wait.h"
+
+__attribute__((weak)) void bootloader_jump(void) {
+ wait_ms(100);
+ __BKPT(0);
+}
diff --git a/platforms/chibios/bootloaders/kiibohd.c b/platforms/chibios/bootloaders/kiibohd.c
new file mode 100644
index 0000000000..911e807092
--- /dev/null
+++ b/platforms/chibios/bootloaders/kiibohd.c
@@ -0,0 +1,32 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+
+/* Kiibohd Bootloader (MCHCK and Infinity KB) */
+#define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000
+
+const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00";
+
+__attribute__((weak)) void bootloader_jump(void) {
+ void *volatile vbat = (void *)VBAT;
+ __builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic));
+
+ // request reset
+ SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk;
+}
diff --git a/platforms/chibios/bootloaders/none.c b/platforms/chibios/bootloaders/none.c
new file mode 100644
index 0000000000..624fbe242a
--- /dev/null
+++ b/platforms/chibios/bootloaders/none.c
@@ -0,0 +1,19 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+__attribute__((weak)) void bootloader_jump(void) {}
diff --git a/platforms/chibios/bootloaders/stm32_dfu.c b/platforms/chibios/bootloaders/stm32_dfu.c
new file mode 100644
index 0000000000..0a113570f7
--- /dev/null
+++ b/platforms/chibios/bootloaders/stm32_dfu.c
@@ -0,0 +1,94 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+#include <hal.h>
+#include "wait.h"
+
+extern uint32_t __ram0_end__;
+
+#ifndef STM32_BOOTLOADER_DUAL_BANK
+# define STM32_BOOTLOADER_DUAL_BANK FALSE
+#endif
+
+#if STM32_BOOTLOADER_DUAL_BANK
+# include "config_common.h"
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO
+# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle"
+# endif
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY
+# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0
+# endif
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY
+# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000
+# endif
+
+__attribute__((weak)) void bootloader_jump(void) {
+ // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash
+ // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do
+ // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to
+ // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord
+ // #hardware channel pins for an example circuit.
+ palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL);
+# if STM32_BOOTLOADER_DUAL_BANK_POLARITY
+ palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
+# else
+ palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
+# endif
+
+ // Wait for a while for the capacitor to charge
+ wait_ms(100);
+
+ // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high
+ NVIC_SystemReset();
+}
+
+// not needed at all, but if anybody attempts to invoke it....
+void enter_bootloader_mode_if_requested(void) {}
+
+#else
+
+/* This code should be checked whether it runs correctly on platforms */
+# define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
+# define BOOTLOADER_MAGIC 0xDEADBEEF
+# define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4)
+
+__attribute__((weak)) void bootloader_jump(void) {
+ *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
+ NVIC_SystemReset();
+}
+
+void enter_bootloader_mode_if_requested(void) {
+ unsigned long *check = MAGIC_ADDR;
+ if (*check == BOOTLOADER_MAGIC) {
+ *check = 0;
+ __set_CONTROL(0);
+ __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS);
+ __enable_irq();
+
+ typedef void (*BootJump_t)(void);
+ BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4);
+ boot_jump();
+ while (1)
+ ;
+ }
+}
+#endif
diff --git a/platforms/chibios/bootloaders/stm32duino.c b/platforms/chibios/bootloaders/stm32duino.c
new file mode 100644
index 0000000000..dd1d551fa9
--- /dev/null
+++ b/platforms/chibios/bootloaders/stm32duino.c
@@ -0,0 +1,21 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+
+__attribute__((weak)) void bootloader_jump(void) { NVIC_SystemReset(); }
diff --git a/platforms/chibios/bootloaders/tinyuf2.c b/platforms/chibios/bootloaders/tinyuf2.c
new file mode 100644
index 0000000000..9ffca5dec8
--- /dev/null
+++ b/platforms/chibios/bootloaders/tinyuf2.c
@@ -0,0 +1,34 @@
+/* Copyright 2021 QMK
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "bootloader.h"
+
+#include <ch.h>
+
+// From tinyuf2's board_api.h
+#define DBL_TAP_MAGIC 0xF01669EF
+
+// defined by linker script
+extern uint32_t _board_dfu_dbl_tap[];
+#define DBL_TAP_REG _board_dfu_dbl_tap[0]
+
+__attribute__((weak)) void bootloader_jump(void) {
+ DBL_TAP_REG = DBL_TAP_MAGIC;
+ NVIC_SystemReset();
+}
+
+/* not needed, no two-stage reset */
+void enter_bootloader_mode_if_requested(void) {}
diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c
index 43591d56f8..4a5d4760d0 100644
--- a/platforms/chibios/drivers/i2c_master.c
+++ b/platforms/chibios/drivers/i2c_master.c
@@ -27,8 +27,67 @@
#include "quantum.h"
#include "i2c_master.h"
#include <string.h>
+#include <ch.h>
#include <hal.h>
+#ifndef I2C1_SCL_PIN
+# define I2C1_SCL_PIN B6
+#endif
+#ifndef I2C1_SDA_PIN
+# define I2C1_SDA_PIN B7
+#endif
+
+#ifdef USE_I2CV1
+# ifndef I2C1_OPMODE
+# define I2C1_OPMODE OPMODE_I2C
+# endif
+# ifndef I2C1_CLOCK_SPEED
+# define I2C1_CLOCK_SPEED 100000 /* 400000 */
+# endif
+# ifndef I2C1_DUTY_CYCLE
+# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
+# endif
+#else
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+# ifndef I2C1_TIMINGR_PRESC
+# define I2C1_TIMINGR_PRESC 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLDEL
+# define I2C1_TIMINGR_SCLDEL 7U
+# endif
+# ifndef I2C1_TIMINGR_SDADEL
+# define I2C1_TIMINGR_SDADEL 0U
+# endif
+# ifndef I2C1_TIMINGR_SCLH
+# define I2C1_TIMINGR_SCLH 38U
+# endif
+# ifndef I2C1_TIMINGR_SCLL
+# define I2C1_TIMINGR_SCLL 129U
+# endif
+#endif
+
+#ifndef I2C_DRIVER
+# define I2C_DRIVER I2CD1
+#endif
+
+#ifdef USE_GPIOV1
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
+# endif
+#else
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+# ifndef I2C1_SCL_PAL_MODE
+# define I2C1_SCL_PAL_MODE 4
+# endif
+# ifndef I2C1_SDA_PAL_MODE
+# define I2C1_SDA_PAL_MODE 4
+# endif
+#endif
+
static uint8_t i2c_address;
static const I2CConfig i2cconfig = {
diff --git a/platforms/chibios/drivers/i2c_master.h b/platforms/chibios/drivers/i2c_master.h
index 5f082e9d1e..deee7ecc08 100644
--- a/platforms/chibios/drivers/i2c_master.h
+++ b/platforms/chibios/drivers/i2c_master.h
@@ -24,66 +24,7 @@
*/
#pragma once
-#include <ch.h>
-#include <hal.h>
-
-#ifndef I2C1_SCL_PIN
-# define I2C1_SCL_PIN B6
-#endif
-#ifndef I2C1_SDA_PIN
-# define I2C1_SDA_PIN B7
-#endif
-
-#ifdef USE_I2CV1
-# ifndef I2C1_OPMODE
-# define I2C1_OPMODE OPMODE_I2C
-# endif
-# ifndef I2C1_CLOCK_SPEED
-# define I2C1_CLOCK_SPEED 100000 /* 400000 */
-# endif
-# ifndef I2C1_DUTY_CYCLE
-# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
-# endif
-#else
-// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
-# ifndef I2C1_TIMINGR_PRESC
-# define I2C1_TIMINGR_PRESC 0U
-# endif
-# ifndef I2C1_TIMINGR_SCLDEL
-# define I2C1_TIMINGR_SCLDEL 7U
-# endif
-# ifndef I2C1_TIMINGR_SDADEL
-# define I2C1_TIMINGR_SDADEL 0U
-# endif
-# ifndef I2C1_TIMINGR_SCLH
-# define I2C1_TIMINGR_SCLH 38U
-# endif
-# ifndef I2C1_TIMINGR_SCLL
-# define I2C1_TIMINGR_SCLL 129U
-# endif
-#endif
-
-#ifndef I2C_DRIVER
-# define I2C_DRIVER I2CD1
-#endif
-
-#ifdef USE_GPIOV1
-# ifndef I2C1_SCL_PAL_MODE
-# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
-# endif
-# ifndef I2C1_SDA_PAL_MODE
-# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
-# endif
-#else
-// The default PAL alternate modes are used to signal that the pins are used for I2C
-# ifndef I2C1_SCL_PAL_MODE
-# define I2C1_SCL_PAL_MODE 4
-# endif
-# ifndef I2C1_SDA_PAL_MODE
-# define I2C1_SDA_PAL_MODE 4
-# endif
-#endif
+#include <stdint.h>
typedef int16_t i2c_status_t;
diff --git a/platforms/chibios/gpio.h b/platforms/chibios/gpio.h
index 4d057f1cab..eb44a18f9c 100644
--- a/platforms/chibios/gpio.h
+++ b/platforms/chibios/gpio.h
@@ -22,10 +22,12 @@ typedef ioline_t pin_t;
/* Operation of GPIO by pin. */
-#define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
-#define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
-#define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
-#define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
+#define setPinInput(pin) palSetLineMode((pin), PAL_MODE_INPUT)
+#define setPinInputHigh(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLUP)
+#define setPinInputLow(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLDOWN)
+#define setPinOutputPushPull(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_PUSHPULL)
+#define setPinOutputOpenDrain(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_OPENDRAIN)
+#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) palSetLine(pin)
#define writePinLow(pin) palClearLine(pin)
@@ -34,17 +36,3 @@ typedef ioline_t pin_t;
#define readPin(pin) palReadLine(pin)
#define togglePin(pin) palToggleLine(pin)
-
-/* Operation of GPIO by port. */
-
-typedef uint16_t port_data_t;
-
-#define readPort(pin) palReadPort(PAL_PORT(pin))
-
-#define setPortBitInput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT)
-#define setPortBitInputHigh(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLUP)
-#define setPortBitInputLow(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLDOWN)
-#define setPortBitOutput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_OUTPUT_PUSHPULL)
-
-#define writePortBitLow(pin, bit) palClearLine(PAL_LINE(PAL_PORT(pin), bit))
-#define writePortBitHigh(pin, bit) palSetLine(PAL_LINE(PAL_PORT(pin), bit))
diff --git a/platforms/common.mk b/platforms/common.mk
index f7a0fc7028..12ab45f823 100644
--- a/platforms/common.mk
+++ b/platforms/common.mk
@@ -4,7 +4,7 @@ TMK_COMMON_SRC += \
$(PLATFORM_COMMON_DIR)/platform.c \
$(PLATFORM_COMMON_DIR)/suspend.c \
$(PLATFORM_COMMON_DIR)/timer.c \
- $(PLATFORM_COMMON_DIR)/bootloader.c \
+ $(PLATFORM_COMMON_DIR)/bootloaders/$(BOOTLOADER_TYPE).c
# Search Path
VPATH += $(PLATFORM_PATH)
diff --git a/platforms/test/bootloader.c b/platforms/test/bootloaders/none.c
index 5155d9ff04..5155d9ff04 100644
--- a/platforms/test/bootloader.c
+++ b/platforms/test/bootloaders/none.c
diff --git a/quantum/action.c b/quantum/action.c
index 5e81efb671..ea2310a4d9 100644
--- a/quantum/action.c
+++ b/quantum/action.c
@@ -794,7 +794,7 @@ void process_action(keyrecord_t *record, action_t action) {
*
* FIXME: Needs documentation.
*/
-void register_code(uint8_t code) {
+__attribute__((weak)) void register_code(uint8_t code) {
if (code == KC_NO) {
return;
}
@@ -890,7 +890,7 @@ void register_code(uint8_t code) {
*
* FIXME: Needs documentation.
*/
-void unregister_code(uint8_t code) {
+__attribute__((weak)) void unregister_code(uint8_t code) {
if (code == KC_NO) {
return;
}
@@ -955,7 +955,7 @@ void unregister_code(uint8_t code) {
* \param code The basic keycode to tap.
* \param delay The amount of time in milliseconds to leave the keycode registered, before unregistering it.
*/
-void tap_code_delay(uint8_t code, uint16_t delay) {
+__attribute__((weak)) void tap_code_delay(uint8_t code, uint16_t delay) {
register_code(code);
for (uint16_t i = delay; i > 0; i--) {
wait_ms(1);
@@ -967,13 +967,13 @@ void tap_code_delay(uint8_t code, uint16_t delay) {
*
* \param code The basic keycode to tap. If `code` is `KC_CAPS_LOCK`, the delay will be `TAP_HOLD_CAPS_DELAY`, otherwise `TAP_CODE_DELAY`, if defined.
*/
-void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); }
+__attribute__((weak)) void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); }
/** \brief Adds the given physically pressed modifiers and sends a keyboard report immediately.
*
* \param mods A bitfield of modifiers to register.
*/
-void register_mods(uint8_t mods) {
+__attribute__((weak)) void register_mods(uint8_t mods) {
if (mods) {
add_mods(mods);
send_keyboard_report();
@@ -984,7 +984,7 @@ void register_mods(uint8_t mods) {
*
* \param mods A bitfield of modifiers to unregister.
*/
-void unregister_mods(uint8_t mods) {
+__attribute__((weak)) void unregister_mods(uint8_t mods) {
if (mods) {
del_mods(mods);
send_keyboard_report();
@@ -995,7 +995,7 @@ void unregister_mods(uint8_t mods) {
*
* \param mods A bitfield of modifiers to register.
*/
-void register_weak_mods(uint8_t mods) {
+__attribute__((weak)) void register_weak_mods(uint8_t mods) {
if (mods) {
add_weak_mods(mods);
send_keyboard_report();
@@ -1006,7 +1006,7 @@ void register_weak_mods(uint8_t mods) {
*
* \param mods A bitfield of modifiers to unregister.
*/
-void unregister_weak_mods(uint8_t mods) {
+__attribute__((weak)) void unregister_weak_mods(uint8_t mods) {
if (mods) {
del_weak_mods(mods);
send_keyboard_report();
diff --git a/quantum/action_util.c b/quantum/action_util.c
index 78e02aec18..7e30593fb1 100644
--- a/quantum/action_util.c
+++ b/quantum/action_util.c
@@ -21,6 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "action_layer.h"
#include "timer.h"
#include "keycode_config.h"
+#include <string.h>
extern keymap_config_t keymap_config;
@@ -247,7 +248,13 @@ void send_keyboard_report(void) {
keyboard_report->mods |= weak_override_mods;
#endif
- host_keyboard_send(keyboard_report);
+ static report_keyboard_t last_report;
+
+ /* Only send the report if there are changes to propagate to the host. */
+ if (memcmp(keyboard_report, &last_report, sizeof(report_keyboard_t)) != 0) {
+ memcpy(&last_report, keyboard_report, sizeof(report_keyboard_t));
+ host_keyboard_send(keyboard_report);
+ }
}
/** \brief Get mods
diff --git a/quantum/audio/audio.c b/quantum/audio/audio.c
index 49bb309e80..b3d6389dd5 100644
--- a/quantum/audio/audio.c
+++ b/quantum/audio/audio.c
@@ -160,6 +160,8 @@ void audio_toggle(void) {
eeconfig_update_audio(audio_config.raw);
if (audio_config.enable) {
audio_on_user();
+ } else {
+ audio_off_user();
}
}
@@ -172,6 +174,7 @@ void audio_on(void) {
void audio_off(void) {
PLAY_SONG(audio_off_song);
+ audio_off_user();
wait_ms(100);
audio_stop_all();
audio_config.enable = 0;
diff --git a/quantum/debounce.h b/quantum/debounce.h
index 5043868289..3532d9cd7b 100644
--- a/quantum/debounce.h
+++ b/quantum/debounce.h
@@ -6,8 +6,6 @@
// changed is true if raw has changed since the last call
void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed);
-bool debounce_active(void);
-
void debounce_init(uint8_t num_rows);
void debounce_free(void);
diff --git a/quantum/debounce/asym_eager_defer_pk.c b/quantum/debounce/asym_eager_defer_pk.c
index 81f39383c4..b1eb4a2b7b 100644
--- a/quantum/debounce/asym_eager_defer_pk.c
+++ b/quantum/debounce/asym_eager_defer_pk.c
@@ -165,7 +165,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui
}
}
-bool debounce_active(void) { return true; }
#else
# include "none.c"
#endif
diff --git a/quantum/debounce/none.c b/quantum/debounce/none.c
index b03892bc5b..8a85cc04a8 100644
--- a/quantum/debounce/none.c
+++ b/quantum/debounce/none.c
@@ -26,6 +26,4 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool
}
}
-bool debounce_active(void) { return false; }
-
void debounce_free(void) {}
diff --git a/quantum/debounce/sym_defer_g.c b/quantum/debounce/sym_defer_g.c
index 9155eb914c..8cac1c37f9 100644
--- a/quantum/debounce/sym_defer_g.c
+++ b/quantum/debounce/sym_defer_g.c
@@ -44,8 +44,6 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool
}
}
-bool debounce_active(void) { return debouncing; }
-
void debounce_free(void) {}
#else // no debouncing.
# include "none.c"
diff --git a/quantum/debounce/sym_defer_pk.c b/quantum/debounce/sym_defer_pk.c
index 1b698ba347..9dee29e28e 100644
--- a/quantum/debounce/sym_defer_pk.c
+++ b/quantum/debounce/sym_defer_pk.c
@@ -134,7 +134,6 @@ static void start_debounce_counters(matrix_row_t raw[], matrix_row_t cooked[], u
}
}
-bool debounce_active(void) { return true; }
#else
# include "none.c"
#endif
diff --git a/quantum/debounce/sym_defer_pr.c b/quantum/debounce/sym_defer_pr.c
new file mode 100644
index 0000000000..8b33acc6a2
--- /dev/null
+++ b/quantum/debounce/sym_defer_pr.c
@@ -0,0 +1,72 @@
+/*
+Copyright 2021 Chad Austin <chad@chadaustin.me>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+Symmetric per-row debounce algorithm. Changes only apply when
+DEBOUNCE milliseconds have elapsed since the last change.
+*/
+
+#include "matrix.h"
+#include "timer.h"
+#include "quantum.h"
+#include <stdlib.h>
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 5
+#endif
+
+static uint16_t last_time;
+// [row] milliseconds until key's state is considered debounced.
+static uint8_t* countdowns;
+// [row]
+static matrix_row_t* last_raw;
+
+void debounce_init(uint8_t num_rows) {
+ countdowns = (uint8_t*)calloc(num_rows, sizeof(uint8_t));
+ last_raw = (matrix_row_t*)calloc(num_rows, sizeof(matrix_row_t));
+
+ last_time = timer_read();
+}
+
+void debounce_free(void) {
+ free(countdowns);
+ countdowns = NULL;
+ free(last_raw);
+ last_raw = NULL;
+}
+
+void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
+ uint16_t now = timer_read();
+ uint16_t elapsed16 = TIMER_DIFF_16(now, last_time);
+ last_time = now;
+ uint8_t elapsed = (elapsed16 > 255) ? 255 : elapsed16;
+
+ uint8_t* countdown = countdowns;
+
+ for (uint8_t row = 0; row < num_rows; ++row, ++countdown) {
+ matrix_row_t raw_row = raw[row];
+
+ if (raw_row != last_raw[row]) {
+ *countdown = DEBOUNCE;
+ last_raw[row] = raw_row;
+ } else if (*countdown > elapsed) {
+ *countdown -= elapsed;
+ } else if (*countdown) {
+ cooked[row] = raw_row;
+ *countdown = 0;
+ }
+ }
+}
+
+bool debounce_active(void) { return true; }
diff --git a/quantum/debounce/sym_eager_pk.c b/quantum/debounce/sym_eager_pk.c
index 9da000ea9a..deec463649 100644
--- a/quantum/debounce/sym_eager_pk.c
+++ b/quantum/debounce/sym_eager_pk.c
@@ -140,7 +140,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui
}
}
-bool debounce_active(void) { return true; }
#else
# include "none.c"
#endif
diff --git a/quantum/debounce/sym_eager_pr.c b/quantum/debounce/sym_eager_pr.c
index eda92a263b..29b0cabefb 100644
--- a/quantum/debounce/sym_eager_pr.c
+++ b/quantum/debounce/sym_eager_pr.c
@@ -132,7 +132,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui
}
}
-bool debounce_active(void) { return true; }
#else
# include "none.c"
#endif
diff --git a/quantum/debounce/tests/rules.mk b/quantum/debounce/tests/rules.mk
index e908dd6f67..8318b1c668 100644
--- a/quantum/debounce/tests/rules.mk
+++ b/quantum/debounce/tests/rules.mk
@@ -28,6 +28,11 @@ debounce_sym_defer_pk_SRC := $(DEBOUNCE_COMMON_SRC) \
$(QUANTUM_PATH)/debounce/sym_defer_pk.c \
$(QUANTUM_PATH)/debounce/tests/sym_defer_pk_tests.cpp
+debounce_sym_defer_pr_DEFS := $(DEBOUNCE_COMMON_DEFS)
+debounce_sym_defer_pr_SRC := $(DEBOUNCE_COMMON_SRC) \
+ $(QUANTUM_PATH)/debounce/sym_defer_pr.c \
+ $(QUANTUM_PATH)/debounce/tests/sym_defer_pr_tests.cpp
+
debounce_sym_eager_pk_DEFS := $(DEBOUNCE_COMMON_DEFS)
debounce_sym_eager_pk_SRC := $(DEBOUNCE_COMMON_SRC) \
$(QUANTUM_PATH)/debounce/sym_eager_pk.c \
diff --git a/quantum/debounce/tests/sym_defer_pr_tests.cpp b/quantum/debounce/tests/sym_defer_pr_tests.cpp
new file mode 100644
index 0000000000..417e1f4ca2
--- /dev/null
+++ b/quantum/debounce/tests/sym_defer_pr_tests.cpp
@@ -0,0 +1,238 @@
+/* Copyright 2021 Simon Arlott
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "gtest/gtest.h"
+
+#include "debounce_test_common.h"
+
+TEST_F(DebounceTest, OneKeyShort1) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ {5, {}, {{0, 1, DOWN}}},
+ /* 0ms delay (fast scan rate) */
+ {5, {{0, 1, UP}}, {}},
+
+ {10, {}, {{0, 1, UP}}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyShort2) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ {5, {}, {{0, 1, DOWN}}},
+ /* 1ms delay */
+ {6, {{0, 1, UP}}, {}},
+
+ {11, {}, {{0, 1, UP}}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyShort3) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ {5, {}, {{0, 1, DOWN}}},
+ /* 2ms delay */
+ {7, {{0, 1, UP}}, {}},
+
+ {12, {}, {{0, 1, UP}}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyTooQuick1) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+ /* Release key exactly on the debounce time */
+ {5, {{0, 1, UP}}, {}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyTooQuick2) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ {5, {}, {{0, 1, DOWN}}},
+ {6, {{0, 1, UP}}, {}},
+
+ /* Press key exactly on the debounce time */
+ {11, {{0, 1, DOWN}}, {}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyBouncing1) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+ {1, {{0, 1, UP}}, {}},
+ {2, {{0, 1, DOWN}}, {}},
+ {3, {{0, 1, UP}}, {}},
+ {4, {{0, 1, DOWN}}, {}},
+ {5, {{0, 1, UP}}, {}},
+ {6, {{0, 1, DOWN}}, {}},
+ {11, {}, {{0, 1, DOWN}}}, /* 5ms after DOWN at time 7 */
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyBouncing2) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+ {5, {}, {{0, 1, DOWN}}},
+ {6, {{0, 1, UP}}, {}},
+ {7, {{0, 1, DOWN}}, {}},
+ {8, {{0, 1, UP}}, {}},
+ {9, {{0, 1, DOWN}}, {}},
+ {10, {{0, 1, UP}}, {}},
+ {15, {}, {{0, 1, UP}}}, /* 5ms after UP at time 10 */
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyLong) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ {5, {}, {{0, 1, DOWN}}},
+
+ {25, {{0, 1, UP}}, {}},
+
+ {30, {}, {{0, 1, UP}}},
+
+ {50, {{0, 1, DOWN}}, {}},
+
+ {55, {}, {{0, 1, DOWN}}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, TwoKeysShort) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+ {1, {{0, 2, DOWN}}, {}},
+
+ {6, {}, {{0, 1, DOWN}, {0, 2, DOWN}}},
+
+ {7, {{0, 1, UP}}, {}},
+ {8, {{0, 2, UP}}, {}},
+
+ {13, {}, {{0, 1, UP}, {0, 2, UP}}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, TwoKeysSimultaneous1) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {}},
+
+ {5, {}, {{0, 1, DOWN}, {0, 2, DOWN}}},
+ {6, {{0, 1, UP}, {0, 2, UP}}, {}},
+
+ {11, {}, {{0, 1, UP}, {0, 2, UP}}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, TwoKeysSimultaneous2) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+ {1, {{0, 2, DOWN}}, {}},
+
+ {6, {}, {{0, 1, DOWN}, {0, 2, DOWN}}},
+ {7, {{0, 2, UP}}, {}},
+ {9, {{0, 1, UP}}, {}},
+
+ // Debouncing loses the specific ordering -- both events report simultaneously.
+ {14, {}, {{0, 1, UP}, {0, 2, UP}}},
+ });
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyDelayedScan1) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ /* Processing is very late */
+ {300, {}, {{0, 1, DOWN}}},
+ /* Immediately release key */
+ {300, {{0, 1, UP}}, {}},
+
+ {305, {}, {{0, 1, UP}}},
+ });
+ time_jumps_ = true;
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyDelayedScan2) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ /* Processing is very late */
+ {300, {}, {{0, 1, DOWN}}},
+ /* Release key after 1ms */
+ {301, {{0, 1, UP}}, {}},
+
+ {306, {}, {{0, 1, UP}}},
+ });
+ time_jumps_ = true;
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyDelayedScan3) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ /* Release key before debounce expires */
+ {300, {{0, 1, UP}}, {}},
+ });
+ time_jumps_ = true;
+ runEvents();
+}
+
+TEST_F(DebounceTest, OneKeyDelayedScan4) {
+ addEvents({
+ /* Time, Inputs, Outputs */
+ {0, {{0, 1, DOWN}}, {}},
+
+ /* Processing is a bit late */
+ {50, {}, {{0, 1, DOWN}}},
+ /* Release key after 1ms */
+ {51, {{0, 1, UP}}, {}},
+
+ {56, {}, {{0, 1, UP}}},
+ });
+ time_jumps_ = true;
+ runEvents();
+}
diff --git a/quantum/debounce/tests/testlist.mk b/quantum/debounce/tests/testlist.mk
index c54c45aa63..f7bd520698 100644
--- a/quantum/debounce/tests/testlist.mk
+++ b/quantum/debounce/tests/testlist.mk
@@ -1,6 +1,7 @@
TEST_LIST += \
debounce_sym_defer_g \
debounce_sym_defer_pk \
+ debounce_sym_defer_pr \
debounce_sym_eager_pk \
debounce_sym_eager_pr \
debounce_asym_eager_defer_pk
diff --git a/quantum/matrix.c b/quantum/matrix.c
index 483d518ecc..a58cc752fb 100644
--- a/quantum/matrix.c
+++ b/quantum/matrix.c
@@ -63,17 +63,13 @@ extern matrix_row_t matrix[MATRIX_ROWS]; // debounced values
#ifdef SPLIT_KEYBOARD
// row offsets for each hand
-uint8_t thisHand, thatHand;
+extern uint8_t thisHand, thatHand;
#endif
// user-defined overridable functions
__attribute__((weak)) void matrix_init_pins(void);
__attribute__((weak)) void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
__attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col, matrix_row_t row_shifter);
-#ifdef SPLIT_KEYBOARD
-__attribute__((weak)) void matrix_slave_scan_kb(void) { matrix_slave_scan_user(); }
-__attribute__((weak)) void matrix_slave_scan_user(void) {}
-#endif
static inline void setPinOutput_writeLow(pin_t pin) {
ATOMIC_BLOCK_FORCEON {
@@ -308,35 +304,6 @@ __attribute__((weak)) bool transport_master_if_connected(matrix_row_t master_mat
transport_master(master_matrix, slave_matrix);
return true; // Treat the transport as always connected
}
-
-bool matrix_post_scan(void) {
- bool changed = false;
- if (is_keyboard_master()) {
- static bool last_connected = false;
- matrix_row_t slave_matrix[ROWS_PER_HAND] = {0};
- if (transport_master_if_connected(matrix + thisHand, slave_matrix)) {
- changed = memcmp(matrix + thatHand, slave_matrix, sizeof(slave_matrix)) != 0;
-
- last_connected = true;
- } else if (last_connected) {
- // reset other half when disconnected
- memset(slave_matrix, 0, sizeof(slave_matrix));
- changed = true;
-
- last_connected = false;
- }
-
- if (changed) memcpy(matrix + thatHand, slave_matrix, sizeof(slave_matrix));
-
- matrix_scan_quantum();
- } else {
- transport_slave(matrix + thatHand, matrix + thisHand);
-
- matrix_slave_scan_kb();
- }
-
- return changed;
-}
#endif
uint8_t matrix_scan(void) {
diff --git a/quantum/matrix.h b/quantum/matrix.h
index 5c696622fc..d968efeb0f 100644
--- a/quantum/matrix.h
+++ b/quantum/matrix.h
@@ -46,8 +46,6 @@ void matrix_setup(void);
void matrix_init(void);
/* scan all key states on matrix */
uint8_t matrix_scan(void);
-/* whether modified from previous scan. used after matrix_scan. */
-bool matrix_is_modified(void) __attribute__((deprecated));
/* whether a switch is on */
bool matrix_is_on(uint8_t row, uint8_t col);
/* matrix state on row */
@@ -75,6 +73,7 @@ void matrix_init_user(void);
void matrix_scan_user(void);
#ifdef SPLIT_KEYBOARD
+bool matrix_post_scan(void);
void matrix_slave_scan_kb(void);
void matrix_slave_scan_user(void);
#endif
diff --git a/quantum/matrix_common.c b/quantum/matrix_common.c
index 66c89970b1..79f77421e1 100644
--- a/quantum/matrix_common.c
+++ b/quantum/matrix_common.c
@@ -4,6 +4,14 @@
#include "wait.h"
#include "print.h"
#include "debug.h"
+#ifdef SPLIT_KEYBOARD
+# include "split_common/split_util.h"
+# include "split_common/transactions.h"
+
+# define ROWS_PER_HAND (MATRIX_ROWS / 2)
+#else
+# define ROWS_PER_HAND (MATRIX_ROWS)
+#endif
#ifndef MATRIX_IO_DELAY
# define MATRIX_IO_DELAY 30
@@ -13,6 +21,11 @@
matrix_row_t raw_matrix[MATRIX_ROWS];
matrix_row_t matrix[MATRIX_ROWS];
+#ifdef SPLIT_KEYBOARD
+// row offsets for each hand
+uint8_t thisHand, thatHand;
+#endif
+
#ifdef MATRIX_MASKED
extern const matrix_row_t matrix_mask[];
#endif
@@ -45,12 +58,6 @@ inline matrix_row_t matrix_get_row(uint8_t row) {
#endif
}
-// Deprecated.
-bool matrix_is_modified(void) {
- if (debounce_active()) return false;
- return true;
-}
-
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
@@ -84,18 +91,61 @@ uint8_t matrix_key_count(void) {
return count;
}
+#ifdef SPLIT_KEYBOARD
+bool matrix_post_scan(void) {
+ bool changed = false;
+ if (is_keyboard_master()) {
+ matrix_row_t slave_matrix[ROWS_PER_HAND] = {0};
+ if (transport_master_if_connected(matrix + thisHand, slave_matrix)) {
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ if (matrix[thatHand + i] != slave_matrix[i]) {
+ matrix[thatHand + i] = slave_matrix[i];
+ changed = true;
+ }
+ }
+ } else {
+ // reset other half if disconnected
+ for (int i = 0; i < ROWS_PER_HAND; ++i) {
+ matrix[thatHand + i] = 0;
+ slave_matrix[i] = 0;
+ }
+
+ changed = true;
+ }
+
+ matrix_scan_quantum();
+ } else {
+ transport_slave(matrix + thatHand, matrix + thisHand);
+
+ matrix_slave_scan_kb();
+ }
+
+ return changed;
+}
+#endif
+
/* `matrix_io_delay ()` exists for backwards compatibility. From now on, use matrix_output_unselect_delay(). */
__attribute__((weak)) void matrix_io_delay(void) { wait_us(MATRIX_IO_DELAY); }
-
__attribute__((weak)) void matrix_output_select_delay(void) { waitInputPinDelay(); }
__attribute__((weak)) void matrix_output_unselect_delay(uint8_t line, bool key_pressed) { matrix_io_delay(); }
// CUSTOM MATRIX 'LITE'
__attribute__((weak)) void matrix_init_custom(void) {}
-
__attribute__((weak)) bool matrix_scan_custom(matrix_row_t current_matrix[]) { return true; }
+#ifdef SPLIT_KEYBOARD
+__attribute__((weak)) void matrix_slave_scan_kb(void) { matrix_slave_scan_user(); }
+__attribute__((weak)) void matrix_slave_scan_user(void) {}
+#endif
+
__attribute__((weak)) void matrix_init(void) {
+#ifdef SPLIT_KEYBOARD
+ split_pre_init();
+
+ thisHand = isLeftHand ? 0 : (ROWS_PER_HAND);
+ thatHand = ROWS_PER_HAND - thisHand;
+#endif
+
matrix_init_custom();
// initialize matrix state: all keys off
@@ -104,17 +154,26 @@ __attribute__((weak)) void matrix_init(void) {
matrix[i] = 0;
}
- debounce_init(MATRIX_ROWS);
+ debounce_init(ROWS_PER_HAND);
matrix_init_quantum();
+
+#ifdef SPLIT_KEYBOARD
+ split_post_init();
+#endif
}
__attribute__((weak)) uint8_t matrix_scan(void) {
bool changed = matrix_scan_custom(raw_matrix);
- debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
-
+#ifdef SPLIT_KEYBOARD
+ debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
+ changed = (changed || matrix_post_scan());
+#else
+ debounce(raw_matrix, matrix, ROWS_PER_HAND, changed);
matrix_scan_quantum();
+#endif
+
return changed;
}
diff --git a/quantum/pointing_device.c b/quantum/pointing_device.c
index 2fefdb67b6..23d93fa15f 100644
--- a/quantum/pointing_device.c
+++ b/quantum/pointing_device.c
@@ -18,24 +18,105 @@
#include "pointing_device.h"
#include <string.h>
+#include "timer.h"
#ifdef MOUSEKEY_ENABLE
# include "mousekey.h"
#endif
#if (defined(POINTING_DEVICE_ROTATION_90) + defined(POINTING_DEVICE_ROTATION_180) + defined(POINTING_DEVICE_ROTATION_270)) > 1
# error More than one rotation selected. This is not supported.
#endif
+#if defined(SPLIT_POINTING_ENABLE)
+# include "transactions.h"
+# include "keyboard.h"
-static report_mouse_t mouseReport = {};
+report_mouse_t shared_mouse_report = {};
+uint16_t shared_cpi = 0;
+
+/**
+ * @brief Sets the shared mouse report used be pointing device task
+ *
+ * NOTE : Only available when using SPLIT_POINTING_ENABLE
+ *
+ * @param[in] new_mouse_report report_mouse_t
+ */
+void pointing_device_set_shared_report(report_mouse_t new_mouse_report) { shared_mouse_report = new_mouse_report; }
+
+/**
+ * @brief Gets current pointing device CPI if supported
+ *
+ * Gets current cpi of the shared report and returns it as uint16_t
+ *
+ * NOTE : Only available when using SPLIT_POINTING_ENABLE
+ *
+ * @return cpi value as uint16_t
+ */
+uint16_t pointing_device_get_shared_cpi(void) { return shared_cpi; }
+
+# if defined(POINTING_DEVICE_LEFT)
+# define POINTING_DEVICE_THIS_SIDE is_keyboard_left()
+# elif defined(POINTING_DEVICE_RIGHT)
+# define POINTING_DEVICE_THIS_SIDE !is_keyboard_left()
+# elif defined(POINTING_DEVICE_COMBINED)
+# define POINTING_DEVICE_THIS_SIDE true
+# endif
+
+#endif // defined(SPLIT_POINTING_ENABLE)
+
+static report_mouse_t local_mouse_report = {};
extern const pointing_device_driver_t pointing_device_driver;
+/**
+ * @brief Compares 2 mouse reports for difference and returns result
+ *
+ * @param[in] new report_mouse_t
+ * @param[in] old report_mouse_t
+ * @return bool result
+ */
__attribute__((weak)) bool has_mouse_report_changed(report_mouse_t new, report_mouse_t old) { return memcmp(&new, &old, sizeof(new)); }
-__attribute__((weak)) void pointing_device_init_kb(void) {}
-__attribute__((weak)) void pointing_device_init_user(void) {}
+/**
+ * @brief Keyboard level code pointing device initialisation
+ *
+ */
+__attribute__((weak)) void pointing_device_init_kb(void) {}
+
+/**
+ * @brief User level code pointing device initialisation
+ *
+ */
+__attribute__((weak)) void pointing_device_init_user(void) {}
+
+/**
+ * @brief Weak function allowing for keyboard level mouse report modification
+ *
+ * Takes report_mouse_t struct allowing modification at keyboard level then returns report_mouse_t.
+ *
+ * @param[in] mouse_report report_mouse_t
+ * @return report_mouse_t
+ */
__attribute__((weak)) report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { return pointing_device_task_user(mouse_report); }
+
+/**
+ * @brief Weak function allowing for user level mouse report modification
+ *
+ * Takes report_mouse_t struct allowing modification at user level then returns report_mouse_t.
+ *
+ * @param[in] mouse_report report_mouse_t
+ * @return report_mouse_t
+ */
__attribute__((weak)) report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { return mouse_report; }
+/**
+ * @brief Handles pointing device buttons
+ *
+ * Returns modified button bitmask using bool pressed and selected pointing_device_buttons_t button in uint8_t buttons bitmask.
+ *
+ * @param buttons[in] uint8_t bitmask
+ * @param pressed[in] bool
+ * @param button[in] pointing_device_buttons_t value
+ * @return Modified uint8_t bitmask buttons
+ */
__attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button) {
if (pressed) {
buttons |= 1 << (button);
@@ -45,7 +126,17 @@ __attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bo
return buttons;
}
+/**
+ * @brief Initialises pointing device
+ *
+ * Initialises pointing device, perform driver init and optional keyboard/user level code.
+ */
__attribute__((weak)) void pointing_device_init(void) {
+#if defined(SPLIT_POINTING_ENABLE)
+ if (!(POINTING_DEVICE_THIS_SIDE)) {
+ return;
+ }
+#endif
pointing_device_driver.init();
#ifdef POINTING_DEVICE_MOTION_PIN
setPinInputHigh(POINTING_DEVICE_MOTION_PIN);
@@ -54,67 +145,299 @@ __attribute__((weak)) void pointing_device_init(void) {
pointing_device_init_user();
}
+/**
+ * @brief Sends processed mouse report to host
+ *
+ * This sends the mouse report generated by pointing_device_task if changed since the last report. Once send zeros mouse report except buttons.
+ *
+ */
__attribute__((weak)) void pointing_device_send(void) {
static report_mouse_t old_report = {};
// If you need to do other things, like debugging, this is the place to do it.
- if (has_mouse_report_changed(mouseReport, old_report)) {
- host_mouse_send(&mouseReport);
+ if (has_mouse_report_changed(local_mouse_report, old_report)) {
+ host_mouse_send(&local_mouse_report);
}
// send it and 0 it out except for buttons, so those stay until they are explicity over-ridden using update_pointing_device
- mouseReport.x = 0;
- mouseReport.y = 0;
- mouseReport.v = 0;
- mouseReport.h = 0;
+ local_mouse_report.x = 0;
+ local_mouse_report.y = 0;
+ local_mouse_report.v = 0;
+ local_mouse_report.h = 0;
- memcpy(&old_report, &mouseReport, sizeof(mouseReport));
+ memcpy(&old_report, &local_mouse_report, sizeof(local_mouse_report));
}
-__attribute__((weak)) void pointing_device_task(void) {
- // Gather report info
-#ifdef POINTING_DEVICE_MOTION_PIN
- if (!readPin(POINTING_DEVICE_MOTION_PIN))
-#endif
- mouseReport = pointing_device_driver.get_report(mouseReport);
-
- // Support rotation of the sensor data
+/**
+ * @brief Adjust mouse report by any optional common pointing configuration defines
+ *
+ * This applies rotation or inversion to the mouse report as selected by the pointing device common configuration defines.
+ *
+ * @param mouse_report[in] takes a report_mouse_t to be adjusted
+ * @return report_mouse_t with adjusted values
+ */
+report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report) {
+ // Support rotation of the sensor data
#if defined(POINTING_DEVICE_ROTATION_90) || defined(POINTING_DEVICE_ROTATION_180) || defined(POINTING_DEVICE_ROTATION_270)
- int8_t x = mouseReport.x, y = mouseReport.y;
+ int8_t x = mouse_report.x, y = mouse_report.y;
# if defined(POINTING_DEVICE_ROTATION_90)
- mouseReport.x = y;
- mouseReport.y = -x;
+ mouse_report.x = y;
+ mouse_report.y = -x;
# elif defined(POINTING_DEVICE_ROTATION_180)
- mouseReport.x = -x;
- mouseReport.y = -y;
+ mouse_report.x = -x;
+ mouse_report.y = -y;
# elif defined(POINTING_DEVICE_ROTATION_270)
- mouseReport.x = -y;
- mouseReport.y = x;
+ mouse_report.x = -y;
+ mouse_report.y = x;
# else
# error "How the heck did you get here?!"
# endif
#endif
// Support Inverting the X and Y Axises
#if defined(POINTING_DEVICE_INVERT_X)
- mouseReport.x = -mouseReport.x;
+ mouse_report.x = -mouse_report.x;
#endif
#if defined(POINTING_DEVICE_INVERT_Y)
- mouseReport.y = -mouseReport.y;
+ mouse_report.y = -mouse_report.y;
+#endif
+ return mouse_report;
+}
+
+/**
+ * @brief Retrieves and processes pointing device data.
+ *
+ * This function is part of the keyboard loop and retrieves the mouse report from the pointing device driver.
+ * It applies any optional configuration e.g. rotation or axis inversion and then initiates a send.
+ *
+ */
+__attribute__((weak)) void pointing_device_task(void) {
+#if defined(SPLIT_POINTING_ENABLE)
+ // Don't poll the target side pointing device.
+ if (!is_keyboard_master()) {
+ return;
+ };
+#endif
+
+#if defined(POINTING_DEVICE_TASK_THROTTLE_MS)
+ static uint32_t last_exec = 0;
+ if (timer_elapsed32(last_exec) < POINTING_DEVICE_TASK_THROTTLE_MS) {
+ return;
+ }
+ last_exec = timer_read32();
+#else
+# if defined(SPLIT_POINTING_ENABLE)
+# pragma message("It's recommended you enable a throttle when sharing pointing devices.")
+# endif
+#endif
+
+ // Gather report info
+#ifdef POINTING_DEVICE_MOTION_PIN
+# if defined(SPLIT_POINTING_ENABLE)
+# error POINTING_DEVICE_MOTION_PIN not supported when sharing the pointing device report between sides.
+# endif
+ if (!readPin(POINTING_DEVICE_MOTION_PIN))
#endif
+#if defined(SPLIT_POINTING_ENABLE)
+# if defined(POINTING_DEVICE_COMBINED)
+ static uint8_t old_buttons = 0;
+ local_mouse_report.buttons = old_buttons;
+ local_mouse_report = pointing_device_driver.get_report(local_mouse_report);
+ old_buttons = local_mouse_report.buttons;
+# elif defined(POINTING_DEVICE_LEFT) || defined(POINTING_DEVICE_RIGHT)
+ local_mouse_report = POINTING_DEVICE_THIS_SIDE ? pointing_device_driver.get_report(local_mouse_report) : shared_mouse_report;
+# else
+# error "You need to define the side(s) the pointing device is on. POINTING_DEVICE_COMBINED / POINTING_DEVICE_LEFT / POINTING_DEVICE_RIGHT"
+# endif
+#else
+ local_mouse_report = pointing_device_driver.get_report(local_mouse_report);
+#endif // defined(SPLIT_POINTING_ENABLE)
+
// allow kb to intercept and modify report
- mouseReport = pointing_device_task_kb(mouseReport);
+#if defined(SPLIT_POINTING_ENABLE) && defined(POINTING_DEVICE_COMBINED)
+ if (is_keyboard_left()) {
+ local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report);
+ shared_mouse_report = pointing_device_adjust_by_defines_right(shared_mouse_report);
+ } else {
+ local_mouse_report = pointing_device_adjust_by_defines_right(local_mouse_report);
+ shared_mouse_report = pointing_device_adjust_by_defines(shared_mouse_report);
+ }
+ local_mouse_report = is_keyboard_left() ? pointing_device_task_combined_kb(local_mouse_report, shared_mouse_report) : pointing_device_task_combined_kb(shared_mouse_report, local_mouse_report);
+#else
+ local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report);
+ local_mouse_report = pointing_device_task_kb(local_mouse_report);
+#endif
// combine with mouse report to ensure that the combined is sent correctly
#ifdef MOUSEKEY_ENABLE
report_mouse_t mousekey_report = mousekey_get_report();
- mouseReport.buttons = mouseReport.buttons | mousekey_report.buttons;
+ local_mouse_report.buttons = local_mouse_report.buttons | mousekey_report.buttons;
#endif
pointing_device_send();
}
-report_mouse_t pointing_device_get_report(void) { return mouseReport; }
+/**
+ * @brief Gets current mouse report used by pointing device task
+ *
+ * @return report_mouse_t
+ */
+report_mouse_t pointing_device_get_report(void) { return local_mouse_report; }
+
+/**
+ * @brief Sets mouse report used be pointing device task
+ *
+ * @param[in] new_mouse_report
+ */
+void pointing_device_set_report(report_mouse_t new_mouse_report) { local_mouse_report = new_mouse_report; }
+
+/**
+ * @brief Gets current pointing device CPI if supported
+ *
+ * Gets current cpi from pointing device driver if supported and returns it as uint16_t
+ *
+ * @return cpi value as uint16_t
+ */
+uint16_t pointing_device_get_cpi(void) {
+#if defined(SPLIT_POINTING_ENABLE)
+ return POINTING_DEVICE_THIS_SIDE ? pointing_device_driver.get_cpi() : shared_cpi;
+#else
+ return pointing_device_driver.get_cpi();
+#endif
+}
-void pointing_device_set_report(report_mouse_t newMouseReport) { mouseReport = newMouseReport; }
+/**
+ * @brief Set pointing device CPI if supported
+ *
+ * Takes a uint16_t value to set pointing device cpi if supported by driver.
+ *
+ * @param[in] cpi uint16_t value.
+ */
+void pointing_device_set_cpi(uint16_t cpi) {
+#if defined(SPLIT_POINTING_ENABLE)
+ if (POINTING_DEVICE_THIS_SIDE) {
+ pointing_device_driver.set_cpi(cpi);
+ } else {
+ shared_cpi = cpi;
+ }
+#else
+ pointing_device_driver.set_cpi(cpi);
+#endif
+}
-uint16_t pointing_device_get_cpi(void) { return pointing_device_driver.get_cpi(); }
+#if defined(SPLIT_POINTING_ENABLE) && defined(POINTING_DEVICE_COMBINED)
+/**
+ * @brief Set pointing device CPI if supported
+ *
+ * Takes a bool and uint16_t and allows setting cpi for a single side when using 2 pointing devices with a split keyboard.
+ *
+ * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED
+ *
+ * @param[in] left true = left, false = right.
+ * @param[in] cpi uint16_t value.
+ */
+void pointing_device_set_cpi_on_side(bool left, uint16_t cpi) {
+ bool local = (is_keyboard_left() & left) ? true : false;
+ if (local) {
+ pointing_device_driver.set_cpi(cpi);
+ } else {
+ shared_cpi = cpi;
+ }
+}
-void pointing_device_set_cpi(uint16_t cpi) { pointing_device_driver.set_cpi(cpi); }
+/**
+ * @brief clamps int16_t to int8_t
+ *
+ * @param[in] int16_t value
+ * @return int8_t clamped value
+ */
+static inline int8_t pointing_device_movement_clamp(int16_t value) {
+ if (value < INT8_MIN) {
+ return INT8_MIN;
+ } else if (value > INT8_MAX) {
+ return INT8_MAX;
+ } else {
+ return value;
+ }
+}
+
+/**
+ * @brief combines 2 mouse reports and returns 2
+ *
+ * Combines 2 report_mouse_t structs, clamping movement values to int8_t and ignores report_id then returns the resulting report_mouse_t struct.
+ *
+ * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED
+ *
+ * @param[in] left_report left report_mouse_t
+ * @param[in] right_report right report_mouse_t
+ * @return combined report_mouse_t of left_report and right_report
+ */
+report_mouse_t pointing_device_combine_reports(report_mouse_t left_report, report_mouse_t right_report) {
+ left_report.x = pointing_device_movement_clamp((int16_t)left_report.x + right_report.x);
+ left_report.y = pointing_device_movement_clamp((int16_t)left_report.y + right_report.y);
+ left_report.h = pointing_device_movement_clamp((int16_t)left_report.h + right_report.h);
+ left_report.v = pointing_device_movement_clamp((int16_t)left_report.v + right_report.v);
+ left_report.buttons |= right_report.buttons;
+ return left_report;
+}
+
+/**
+ * @brief Adjust mouse report by any optional right pointing configuration defines
+ *
+ * This applies rotation or inversion to the mouse report as selected by the pointing device common configuration defines.
+ *
+ * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED
+ *
+ * @param[in] mouse_report report_mouse_t to be adjusted
+ * @return report_mouse_t with adjusted values
+ */
+report_mouse_t pointing_device_adjust_by_defines_right(report_mouse_t mouse_report) {
+ // Support rotation of the sensor data
+# if defined(POINTING_DEVICE_ROTATION_90_RIGHT) || defined(POINTING_DEVICE_ROTATION_RIGHT) || defined(POINTING_DEVICE_ROTATION_RIGHT)
+ int8_t x = mouse_report.x, y = mouse_report.y;
+# if defined(POINTING_DEVICE_ROTATION_90_RIGHT)
+ mouse_report.x = y;
+ mouse_report.y = -x;
+# elif defined(POINTING_DEVICE_ROTATION_180_RIGHT)
+ mouse_report.x = -x;
+ mouse_report.y = -y;
+# elif defined(POINTING_DEVICE_ROTATION_270_RIGHT)
+ mouse_report.x = -y;
+ mouse_report.y = x;
+# else
+# error "How the heck did you get here?!"
+# endif
+# endif
+ // Support Inverting the X and Y Axises
+# if defined(POINTING_DEVICE_INVERT_X_RIGHT)
+ mouse_report.x = -mouse_report.x;
+# endif
+# if defined(POINTING_DEVICE_INVERT_Y_RIGHT)
+ mouse_report.y = -mouse_report.y;
+# endif
+ return mouse_report;
+}
+
+/**
+ * @brief Weak function allowing for keyboard level mouse report modification
+ *
+ * Takes 2 report_mouse_t structs allowing individual modification of sides at keyboard level then returns pointing_device_task_combined_user.
+ *
+ * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED
+ *
+ * @param[in] left_report report_mouse_t
+ * @param[in] right_report report_mouse_t
+ * @return pointing_device_task_combined_user(left_report, right_report) by default
+ */
+__attribute__((weak)) report_mouse_t pointing_device_task_combined_kb(report_mouse_t left_report, report_mouse_t right_report) { return pointing_device_task_combined_user(left_report, right_report); }
+
+/**
+ * @brief Weak function allowing for user level mouse report modification
+ *
+ * Takes 2 report_mouse_t structs allowing individual modification of sides at user level then returns pointing_device_combine_reports.
+ *
+ * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED
+ *
+ * @param[in] left_report report_mouse_t
+ * @param[in] right_report report_mouse_t
+ * @return pointing_device_combine_reports(left_report, right_report) by default
+ */
+__attribute__((weak)) report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) { return pointing_device_combine_reports(left_report, right_report); }
+#endif
diff --git a/quantum/pointing_device.h b/quantum/pointing_device.h
index 5106c26660..00229e8a24 100644
--- a/quantum/pointing_device.h
+++ b/quantum/pointing_device.h
@@ -86,3 +86,16 @@ void pointing_device_init_user(void);
report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report);
report_mouse_t pointing_device_task_user(report_mouse_t mouse_report);
uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button);
+report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report);
+
+#if defined(SPLIT_POINTING_ENABLE)
+void pointing_device_set_shared_report(report_mouse_t report);
+uint16_t pointing_device_get_shared_cpi(void);
+# if defined(POINTING_DEVICE_COMBINED)
+void pointing_device_set_cpi_on_side(bool left, uint16_t cpi);
+report_mouse_t pointing_device_combine_reports(report_mouse_t left_report, report_mouse_t right_report);
+report_mouse_t pointing_device_task_combined_kb(report_mouse_t left_report, report_mouse_t right_report);
+report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report);
+report_mouse_t pointing_device_adjust_by_defines_right(report_mouse_t mouse_report);
+# endif // defined(POINTING_DEVICE_COMBINED)
+#endif // defined(SPLIT_POINTING_ENABLE)
diff --git a/quantum/pointing_device_drivers.c b/quantum/pointing_device_drivers.c
index 9ad5e76ba6..260a6d2eb4 100644
--- a/quantum/pointing_device_drivers.c
+++ b/quantum/pointing_device_drivers.c
@@ -165,14 +165,13 @@ const pointing_device_driver_t pointing_device_driver = {
// clang-format on
#elif defined(POINTING_DEVICE_DRIVER_pimoroni_trackball)
-report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) {
- static fast_timer_t throttle = 0;
- static uint16_t debounce = 0;
- static uint8_t error_count = 0;
- pimoroni_data_t pimoroni_data = {0};
- static int16_t x_offset = 0, y_offset = 0;
-
- if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT && timer_elapsed_fast(throttle) >= PIMORONI_TRACKBALL_INTERVAL_MS) {
+report_mouse_t pimoroni_trackball_get_report(report_mouse_t mouse_report) {
+ static uint16_t debounce = 0;
+ static uint8_t error_count = 0;
+ pimoroni_data_t pimoroni_data = {0};
+ static int16_t x_offset = 0, y_offset = 0;
+
+ if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT) {
i2c_status_t status = read_pimoroni_trackball(&pimoroni_data);
if (status == I2C_STATUS_SUCCESS) {
@@ -195,22 +194,20 @@ report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) {
} else {
error_count++;
}
- throttle = timer_read_fast();
}
return mouse_report;
}
// clang-format off
const pointing_device_driver_t pointing_device_driver = {
- .init = pimironi_trackball_device_init,
- .get_report = pimorono_trackball_get_report,
- .set_cpi = NULL,
- .get_cpi = NULL
+ .init = pimoroni_trackball_device_init,
+ .get_report = pimoroni_trackball_get_report,
+ .set_cpi = pimoroni_trackball_set_cpi,
+ .get_cpi = pimoroni_trackball_get_cpi
};
// clang-format on
#elif defined(POINTING_DEVICE_DRIVER_pmw3360)
-
-static void init(void) { pmw3360_init(); }
+static void pmw3360_device_init(void) { pmw3360_init(); }
report_mouse_t pmw3360_get_report(report_mouse_t mouse_report) {
report_pmw3360_t data = pmw3360_read_burst();
@@ -239,7 +236,7 @@ report_mouse_t pmw3360_get_report(report_mouse_t mouse_report) {
// clang-format off
const pointing_device_driver_t pointing_device_driver = {
- .init = init,
+ .init = pmw3360_device_init,
.get_report = pmw3360_get_report,
.set_cpi = pmw3360_set_cpi,
.get_cpi = pmw3360_get_cpi
diff --git a/quantum/process_keycode/process_audio.c b/quantum/process_keycode/process_audio.c
index 3b5fa8490b..23664721e8 100644
--- a/quantum/process_keycode/process_audio.c
+++ b/quantum/process_keycode/process_audio.c
@@ -57,3 +57,4 @@ void process_audio_noteoff(uint8_t note) { stop_note(compute_freq_for_midi_note(
void process_audio_all_notes_off(void) { stop_all_notes(); }
__attribute__((weak)) void audio_on_user() {}
+__attribute__((weak)) void audio_off_user() {}
diff --git a/quantum/process_keycode/process_audio.h b/quantum/process_keycode/process_audio.h
index d89a834ea8..42cfab4af2 100644
--- a/quantum/process_keycode/process_audio.h
+++ b/quantum/process_keycode/process_audio.h
@@ -8,3 +8,4 @@ void process_audio_noteoff(uint8_t note);
void process_audio_all_notes_off(void);
void audio_on_user(void);
+void audio_off_user(void);
diff --git a/quantum/process_keycode/process_key_lock.c b/quantum/process_keycode/process_key_lock.c
index 4bd58f0c1e..941a2c5780 100644
--- a/quantum/process_keycode/process_key_lock.c
+++ b/quantum/process_keycode/process_key_lock.c
@@ -56,6 +56,11 @@ static inline uint16_t translate_keycode(uint16_t keycode) {
}
}
+void cancel_key_lock(void) {
+ watching = false;
+ UNSET_KEY_STATE(0x0);
+}
+
bool process_key_lock(uint16_t *keycode, keyrecord_t *record) {
// We start by categorizing the keypress event. In the event of a down
// event, there are several possibilities:
diff --git a/quantum/process_keycode/process_key_lock.h b/quantum/process_keycode/process_key_lock.h
index baa0b39077..5159b0ba02 100644
--- a/quantum/process_keycode/process_key_lock.h
+++ b/quantum/process_keycode/process_key_lock.h
@@ -18,4 +18,5 @@
#include "quantum.h"
+void cancel_key_lock(void);
bool process_key_lock(uint16_t *keycode, keyrecord_t *record);
diff --git a/quantum/process_keycode/process_magic.c b/quantum/process_keycode/process_magic.c
index d5cff4f12a..6332be647c 100644
--- a/quantum/process_keycode/process_magic.c
+++ b/quantum/process_keycode/process_magic.c
@@ -44,6 +44,7 @@ bool process_magic(uint16_t keycode, keyrecord_t *record) {
case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_ALT_GUI:
case MAGIC_SWAP_LCTL_LGUI ... MAGIC_EE_HANDS_RIGHT:
case MAGIC_TOGGLE_GUI:
+ case MAGIC_TOGGLE_CONTROL_CAPSLOCK:
/* keymap config */
keymap_config.raw = eeconfig_read_keymap();
switch (keycode) {
@@ -168,6 +169,9 @@ bool process_magic(uint16_t keycode, keyrecord_t *record) {
case MAGIC_TOGGLE_GUI:
keymap_config.no_gui = !keymap_config.no_gui;
break;
+ case MAGIC_TOGGLE_CONTROL_CAPSLOCK:
+ keymap_config.swap_control_capslock = !keymap_config.swap_control_capslock;
+ break;
}
eeconfig_update_keymap(keymap_config.raw);
diff --git a/quantum/process_keycode/process_printer.c b/quantum/process_keycode/process_printer.c
index 82528cc680..0801f078ef 100644
--- a/quantum/process_keycode/process_printer.c
+++ b/quantum/process_keycode/process_printer.c
@@ -16,13 +16,14 @@
#include "process_printer.h"
#include "action_util.h"
+#include "uart.h"
bool printing_enabled = false;
uint8_t character_shift = 0;
void enable_printing(void) {
printing_enabled = true;
- serial_init();
+ uart_init(19200);
}
void disable_printing(void) { printing_enabled = false; }
@@ -35,7 +36,7 @@ uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0
void print_char(char c) {
USB_Disable();
- serial_send(c);
+ uart_write(c);
USB_Init();
}
diff --git a/quantum/process_keycode/process_printer.h b/quantum/process_keycode/process_printer.h
index 3c6d06ff94..6f4d09f333 100644
--- a/quantum/process_keycode/process_printer.h
+++ b/quantum/process_keycode/process_printer.h
@@ -18,6 +18,4 @@
#include "quantum.h"
-#include "protocol/serial.h"
-
bool process_printer(uint16_t keycode, keyrecord_t *record);
diff --git a/quantum/quantum.c b/quantum/quantum.c
index 35b6351e9d..c106f795d0 100644
--- a/quantum/quantum.c
+++ b/quantum/quantum.c
@@ -76,9 +76,9 @@ uint8_t extract_mod_bits(uint16_t code) {
return mods_to_send;
}
-static void do_code16(uint16_t code, void (*f)(uint8_t)) { f(extract_mod_bits(code)); }
+void do_code16(uint16_t code, void (*f)(uint8_t)) { f(extract_mod_bits(code)); }
-void register_code16(uint16_t code) {
+__attribute__((weak)) void register_code16(uint16_t code) {
if (IS_MOD(code) || code == KC_NO) {
do_code16(code, register_mods);
} else {
@@ -87,7 +87,7 @@ void register_code16(uint16_t code) {
register_code(code);
}
-void unregister_code16(uint16_t code) {
+__attribute__((weak)) void unregister_code16(uint16_t code) {
unregister_code(code);
if (IS_MOD(code) || code == KC_NO) {
do_code16(code, unregister_mods);
@@ -96,7 +96,7 @@ void unregister_code16(uint16_t code) {
}
}
-void tap_code16(uint16_t code) {
+__attribute__((weak)) void tap_code16(uint16_t code) {
register_code16(code);
#if TAP_CODE_DELAY > 0
wait_ms(TAP_CODE_DELAY);
@@ -263,7 +263,7 @@ bool process_record_quantum(keyrecord_t *record) {
#ifdef TAP_DANCE_ENABLE
process_tap_dance(keycode, record) &&
#endif
-#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE)
+#if defined(UNICODE_COMMON_ENABLE)
process_unicode_common(keycode, record) &&
#endif
#ifdef LEADER_ENABLE
@@ -387,7 +387,7 @@ void matrix_init_quantum() {
#ifdef RGB_MATRIX_ENABLE
rgb_matrix_init();
#endif
-#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE)
+#if defined(UNICODE_COMMON_ENABLE)
unicode_input_mode_init();
#endif
#ifdef HAPTIC_ENABLE
diff --git a/quantum/quantum.h b/quantum/quantum.h
index 6927884e2f..5d3a665887 100644
--- a/quantum/quantum.h
+++ b/quantum/quantum.h
@@ -109,6 +109,10 @@ extern layer_state_t layer_state;
# include "process_unicodemap.h"
#endif
+#ifdef UNICODE_COMMON_ENABLE
+# include "process_unicode_common.h"
+#endif
+
#ifdef KEY_OVERRIDE_ENABLE
# include "process_key_override.h"
#endif
diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h
index e4d0167aac..3950a3bcae 100644
--- a/quantum/quantum_keycodes.h
+++ b/quantum/quantum_keycodes.h
@@ -597,6 +597,8 @@ enum quantum_keycodes {
MACRO_30,
MACRO_31,
+ MAGIC_TOGGLE_CONTROL_CAPSLOCK,
+
// Start of custom keycode range for keyboards and keymaps - always leave at the end
SAFE_RANGE
};
@@ -749,6 +751,7 @@ enum quantum_keycodes {
#define CL_NORM MAGIC_UNSWAP_CONTROL_CAPSLOCK
#define CL_CTRL MAGIC_CAPSLOCK_TO_CONTROL
#define CL_CAPS MAGIC_UNCAPSLOCK_TO_CONTROL
+#define CL_TOGG MAGIC_TOGGLE_CONTROL_CAPSLOCK
#define LCG_SWP MAGIC_SWAP_LCTL_LGUI
#define LCG_NRM MAGIC_UNSWAP_LCTL_LGUI
diff --git a/quantum/split_common/transaction_id_define.h b/quantum/split_common/transaction_id_define.h
index 535bc21aea..aa71c3621e 100644
--- a/quantum/split_common/transaction_id_define.h
+++ b/quantum/split_common/transaction_id_define.h
@@ -78,6 +78,12 @@ enum serial_transaction_id {
PUT_ST7565,
#endif // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE)
+#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+ GET_POINTING_CHECKSUM,
+ GET_POINTING_DATA,
+ PUT_POINTING_CPI,
+#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+
#if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER)
PUT_RPC_INFO,
PUT_RPC_REQ_DATA,
diff --git a/quantum/split_common/transactions.c b/quantum/split_common/transactions.c
index 3ff87710e7..9622acb377 100644
--- a/quantum/split_common/transactions.c
+++ b/quantum/split_common/transactions.c
@@ -579,6 +579,82 @@ static void st7565_handlers_slave(matrix_row_t master_matrix[], matrix_row_t sla
#endif // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE)
////////////////////////////////////////////////////
+// POINTING
+
+#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+
+static bool pointing_handlers_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
+# if defined(POINTING_DEVICE_LEFT)
+ if (is_keyboard_left()) {
+ return true;
+ }
+# elif defined(POINTING_DEVICE_RIGHT)
+ if (!is_keyboard_left()) {
+ return true;
+ }
+# endif
+ static uint32_t last_update = 0;
+ static uint16_t last_cpi = 0;
+ report_mouse_t temp_state;
+ uint16_t temp_cpi;
+ bool okay = read_if_checksum_mismatch(GET_POINTING_CHECKSUM, GET_POINTING_DATA, &last_update, &temp_state, &split_shmem->pointing.report, sizeof(temp_state));
+ if (okay) pointing_device_set_shared_report(temp_state);
+ temp_cpi = pointing_device_get_shared_cpi();
+ if (temp_cpi && memcmp(&last_cpi, &temp_cpi, sizeof(temp_cpi)) != 0) {
+ memcpy(&split_shmem->pointing.cpi, &temp_cpi, sizeof(temp_cpi));
+ okay = transport_write(PUT_POINTING_CPI, &split_shmem->pointing.cpi, sizeof(split_shmem->pointing.cpi));
+ if (okay) {
+ last_cpi = temp_cpi;
+ }
+ }
+ return okay;
+}
+
+extern const pointing_device_driver_t pointing_device_driver;
+
+static void pointing_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
+# if defined(POINTING_DEVICE_LEFT)
+ if (!is_keyboard_left()) {
+ return;
+ }
+# elif defined(POINTING_DEVICE_RIGHT)
+ if (is_keyboard_left()) {
+ return;
+ }
+# endif
+ report_mouse_t temp_report;
+ uint16_t temp_cpi;
+# ifdef POINTING_DEVICE_TASK_THROTTLE_MS
+ static uint32_t last_exec = 0;
+ if (timer_elapsed32(last_exec) < POINTING_DEVICE_TASK_THROTTLE_MS) {
+ return;
+ }
+ last_exec = timer_read32();
+# endif
+ temp_cpi = pointing_device_driver.get_cpi();
+ if (split_shmem->pointing.cpi && memcmp(&split_shmem->pointing.cpi, &temp_cpi, sizeof(temp_cpi)) != 0) {
+ pointing_device_driver.set_cpi(split_shmem->pointing.cpi);
+ }
+ memset(&temp_report, 0, sizeof(temp_report));
+ temp_report = pointing_device_driver.get_report(temp_report);
+ memcpy(&split_shmem->pointing.report, &temp_report, sizeof(temp_report));
+ // Now update the checksum given that the pointing has been written to
+ split_shmem->pointing.checksum = crc8(&temp_report, sizeof(temp_report));
+}
+
+# define TRANSACTIONS_POINTING_MASTER() TRANSACTION_HANDLER_MASTER(pointing)
+# define TRANSACTIONS_POINTING_SLAVE() TRANSACTION_HANDLER_SLAVE(pointing)
+# define TRANSACTIONS_POINTING_REGISTRATIONS [GET_POINTING_CHECKSUM] = trans_target2initiator_initializer(pointing.checksum), [GET_POINTING_DATA] = trans_target2initiator_initializer(pointing.report), [PUT_POINTING_CPI] = trans_initiator2target_initializer(pointing.cpi),
+
+#else // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+
+# define TRANSACTIONS_POINTING_MASTER()
+# define TRANSACTIONS_POINTING_SLAVE()
+# define TRANSACTIONS_POINTING_REGISTRATIONS
+
+#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+
+////////////////////////////////////////////////////
uint8_t dummy;
split_transaction_desc_t split_transaction_table[NUM_TOTAL_TRANSACTIONS] = {
@@ -604,6 +680,7 @@ split_transaction_desc_t split_transaction_table[NUM_TOTAL_TRANSACTIONS] = {
TRANSACTIONS_WPM_REGISTRATIONS
TRANSACTIONS_OLED_REGISTRATIONS
TRANSACTIONS_ST7565_REGISTRATIONS
+ TRANSACTIONS_POINTING_REGISTRATIONS
// clang-format on
#if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER)
@@ -629,6 +706,7 @@ bool transactions_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix
TRANSACTIONS_WPM_MASTER();
TRANSACTIONS_OLED_MASTER();
TRANSACTIONS_ST7565_MASTER();
+ TRANSACTIONS_POINTING_MASTER();
return true;
}
@@ -647,6 +725,7 @@ void transactions_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[
TRANSACTIONS_WPM_SLAVE();
TRANSACTIONS_OLED_SLAVE();
TRANSACTIONS_ST7565_SLAVE();
+ TRANSACTIONS_POINTING_SLAVE();
}
#if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER)
diff --git a/quantum/split_common/transport.h b/quantum/split_common/transport.h
index 1d4f6ed0cd..31b804908b 100644
--- a/quantum/split_common/transport.h
+++ b/quantum/split_common/transport.h
@@ -106,6 +106,15 @@ typedef struct _split_mods_sync_t {
} split_mods_sync_t;
#endif // SPLIT_MODS_ENABLE
+#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+# include "pointing_device.h"
+typedef struct _split_slave_pointing_sync_t {
+ uint8_t checksum;
+ report_mouse_t report;
+ uint16_t cpi;
+} split_slave_pointing_sync_t;
+#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+
#if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER)
typedef struct _rpc_sync_info_t {
int8_t transaction_id;
@@ -173,6 +182,10 @@ typedef struct _split_shared_memory_t {
uint8_t current_st7565_state;
#endif // ST7565_ENABLE(OLED_ENABLE) && defined(SPLIT_ST7565_ENABLE)
+#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+ split_slave_pointing_sync_t pointing;
+#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE)
+
#if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER)
rpc_sync_info_t rpc_info;
uint8_t rpc_m2s_buffer[RPC_M2S_BUFFER_SIZE];
diff --git a/quantum/wpm.c b/quantum/wpm.c
index 925e2c416e..62d4128b8e 100644
--- a/quantum/wpm.c
+++ b/quantum/wpm.c
@@ -22,33 +22,37 @@
// WPM Stuff
static uint8_t current_wpm = 0;
static uint32_t wpm_timer = 0;
-#ifndef WPM_UNFILTERED
-static uint32_t smoothing_timer = 0;
-#endif
/* The WPM calculation works by specifying a certain number of 'periods' inside
* a ring buffer, and we count the number of keypresses which occur in each of
* those periods. Then to calculate WPM, we add up all of the keypresses in
* the whole ring buffer, divide by the number of keypresses in a 'word', and
- * then adjust for how much time is captured by our ring buffer. Right now
- * the ring buffer is hardcoded below to be six half-second periods, accounting
- * for a total WPM sampling period of up to three seconds of typing.
+ * then adjust for how much time is captured by our ring buffer. The size
+ * of the ring buffer can be configured using the keymap configuration
+ * value `WPM_SAMPLE_PERIODS`.
*
- * Whenever our WPM drops to absolute zero due to no typing occurring within
- * any contiguous three seconds, we reset and start measuring fresh,
- * which lets our WPM immediately reach the correct value even before a full
- * three second sampling buffer has been filled.
*/
#define MAX_PERIODS (WPM_SAMPLE_PERIODS)
#define PERIOD_DURATION (1000 * WPM_SAMPLE_SECONDS / MAX_PERIODS)
-#define LATENCY (100)
-static int8_t period_presses[MAX_PERIODS] = {0};
+
+static int16_t period_presses[MAX_PERIODS] = {0};
static uint8_t current_period = 0;
static uint8_t periods = 1;
#if !defined(WPM_UNFILTERED)
-static uint8_t prev_wpm = 0;
-static uint8_t next_wpm = 0;
+/* LATENCY is used as part of filtering, and controls how quickly the reported
+ * WPM trails behind our actual instantaneous measured WPM value, and is
+ * defined in milliseconds. So for LATENCY == 100, the displayed WPM is
+ * smoothed out over periods of 0.1 seconds. This results in a nice,
+ * smoothly-moving reported WPM value which nevertheless is never more than
+ * 0.1 seconds behind the typist's actual current WPM.
+ *
+ * LATENCY is not used if WPM_UNFILTERED is defined.
+ */
+# define LATENCY (100)
+static uint32_t smoothing_timer = 0;
+static uint8_t prev_wpm = 0;
+static uint8_t next_wpm = 0;
#endif
void set_current_wpm(uint8_t new_wpm) { current_wpm = new_wpm; }
@@ -71,7 +75,7 @@ __attribute__((weak)) bool wpm_keycode_user(uint16_t keycode) {
return false;
}
-#ifdef WPM_ALLOW_COUNT_REGRESSION
+#if defined(WPM_ALLOW_COUNT_REGRESSION)
__attribute__((weak)) uint8_t wpm_regress_count(uint16_t keycode) {
bool weak_modded = (keycode >= QK_LCTL && keycode < QK_LSFT) || (keycode >= QK_RCTL && keycode < QK_RSFT);
@@ -95,12 +99,12 @@ __attribute__((weak)) uint8_t wpm_regress_count(uint16_t keycode) {
// Outside 'raw' mode we smooth results over time.
void update_wpm(uint16_t keycode) {
- if (wpm_keycode(keycode)) {
+ if (wpm_keycode(keycode) && period_presses[current_period] < INT16_MAX) {
period_presses[current_period]++;
}
-#ifdef WPM_ALLOW_COUNT_REGRESSION
+#if defined(WPM_ALLOW_COUNT_REGRESSION)
uint8_t regress = wpm_regress_count(keycode);
- if (regress) {
+ if (regress && period_presses[current_period] > INT16_MIN) {
period_presses[current_period]--;
}
#endif
@@ -116,32 +120,41 @@ void decay_wpm(void) {
}
int32_t elapsed = timer_elapsed32(wpm_timer);
uint32_t duration = (((periods)*PERIOD_DURATION) + elapsed);
- uint32_t wpm_now = (60000 * presses) / (duration * WPM_ESTIMATED_WORD_SIZE);
- wpm_now = (wpm_now > 240) ? 240 : wpm_now;
+ int32_t wpm_now = (60000 * presses) / (duration * WPM_ESTIMATED_WORD_SIZE);
+
+ if (wpm_now < 0) // set some reasonable WPM measurement limits
+ wpm_now = 0;
+ if (wpm_now > 240) wpm_now = 240;
if (elapsed > PERIOD_DURATION) {
current_period = (current_period + 1) % MAX_PERIODS;
period_presses[current_period] = 0;
periods = (periods < MAX_PERIODS - 1) ? periods + 1 : MAX_PERIODS - 1;
elapsed = 0;
- /* if (wpm_timer == 0) { */
- wpm_timer = timer_read32();
- /* } else { */
- /* wpm_timer += PERIOD_DURATION; */
- /* } */
+ wpm_timer = timer_read32();
}
if (presses < 2) // don't guess high WPM based on a single keypress.
wpm_now = 0;
-#if defined WPM_LAUNCH_CONTROL
+#if defined(WPM_LAUNCH_CONTROL)
+ /*
+ * If the `WPM_LAUNCH_CONTROL` option is enabled, then whenever our WPM
+ * drops to absolute zero due to no typing occurring within our sample
+ * ring buffer, we reset and start measuring fresh, which lets our WPM
+ * immediately reach the correct value even before a full sampling buffer
+ * has been filled.
+ */
if (presses == 0) {
- current_period = 0;
- periods = 0;
- wpm_now = 0;
+ current_period = 0;
+ periods = 0;
+ wpm_now = 0;
+ period_presses[0] = 0;
}
#endif // WPM_LAUNCH_CONTROL
-#ifndef WPM_UNFILTERED
+#if defined(WPM_UNFILTERED)
+ current_wpm = wpm_now;
+#else
int32_t latency = timer_elapsed32(smoothing_timer);
if (latency > LATENCY) {
smoothing_timer = timer_read32();
@@ -150,7 +163,5 @@ void decay_wpm(void) {
}
current_wpm = prev_wpm + (latency * ((int)next_wpm - (int)prev_wpm) / LATENCY);
-#else
- current_wpm = wpm_now;
#endif
}
diff --git a/quantum/wpm.h b/quantum/wpm.h
index c8e7d26684..305d75b450 100644
--- a/quantum/wpm.h
+++ b/quantum/wpm.h
@@ -26,7 +26,7 @@
# define WPM_SAMPLE_SECONDS 5
#endif
#ifndef WPM_SAMPLE_PERIODS
-# define WPM_SAMPLE_PERIODS 50
+# define WPM_SAMPLE_PERIODS 25
#endif
bool wpm_keycode(uint16_t keycode);
diff --git a/readme.md b/readme.md
index 5649ddfa09..63b483c744 100644
--- a/readme.md
+++ b/readme.md
@@ -1,3 +1,7 @@
+# This is the `develop` branch!
+
+See the [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) document for more information.
+
# Quantum Mechanical Keyboard Firmware
[![Current Version](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags)
diff --git a/tests/auto_shift/test_auto_shift.cpp b/tests/auto_shift/test_auto_shift.cpp
index 9c5ed9a832..a19b5dfa82 100644
--- a/tests/auto_shift/test_auto_shift.cpp
+++ b/tests/auto_shift/test_auto_shift.cpp
@@ -42,7 +42,6 @@ TEST_F(AutoShift, key_release_before_timeout) {
/* Release regular key */
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
regular_key.release();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
@@ -65,8 +64,6 @@ TEST_F(AutoShift, key_release_after_timeout) {
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
regular_key.release();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
diff --git a/tests/basic/test_action_layer.cpp b/tests/basic/test_action_layer.cpp
index 1b12d13642..fe5c729f7c 100644
--- a/tests/basic/test_action_layer.cpp
+++ b/tests/basic/test_action_layer.cpp
@@ -131,14 +131,12 @@ TEST_F(ActionLayer, MomentaryLayerDoesNothing) {
set_keymap({layer_key});
/* Press and release MO, nothing should happen. */
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.press();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.release();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
@@ -153,8 +151,7 @@ TEST_F(ActionLayer, MomentaryLayerWithKeypress) {
set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}});
/* Press MO. */
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.press();
run_one_scan_loop();
EXPECT_TRUE(layer_state_is(1));
@@ -175,8 +172,7 @@ TEST_F(ActionLayer, MomentaryLayerWithKeypress) {
testing::Mock::VerifyAndClearExpectations(&driver);
/* Release MO */
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.release();
run_one_scan_loop();
EXPECT_TRUE(layer_state_is(0));
@@ -199,8 +195,7 @@ TEST_F(ActionLayer, ToggleLayerDoesNothing) {
testing::Mock::VerifyAndClearExpectations(&driver);
/* Release TG. */
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.release();
run_one_scan_loop();
EXPECT_TRUE(layer_state_is(1));
@@ -223,8 +218,7 @@ TEST_F(ActionLayer, ToggleLayerUpAndDown) {
EXPECT_TRUE(layer_state_is(1));
testing::Mock::VerifyAndClearExpectations(&driver);
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
toggle_layer_1_on_layer_0.release();
run_one_scan_loop();
EXPECT_TRUE(layer_state_is(1));
@@ -237,8 +231,7 @@ TEST_F(ActionLayer, ToggleLayerUpAndDown) {
EXPECT_TRUE(layer_state_is(0));
testing::Mock::VerifyAndClearExpectations(&driver);
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
toggle_layer_0_on_layer_1.release();
run_one_scan_loop();
EXPECT_TRUE(layer_state_is(0));
@@ -254,14 +247,13 @@ TEST_F(ActionLayer, LayerTapToggleDoesNothing) {
set_keymap({layer_key});
/* Press and release TT. */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.press();
run_one_scan_loop();
EXPECT_TRUE(layer_state_is(1));
testing::Mock::VerifyAndClearExpectations(&driver);
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.release();
run_one_scan_loop();
EXPECT_TRUE(layer_state_is(0));
@@ -279,7 +271,6 @@ TEST_F(ActionLayer, LayerTapToggleWithKeypress) {
set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}});
/* Press TT. */
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0);
layer_key.press();
run_one_scan_loop();
@@ -298,8 +289,7 @@ TEST_F(ActionLayer, LayerTapToggleWithKeypress) {
EXPECT_TRUE(layer_state_is(1));
testing::Mock::VerifyAndClearExpectations(&driver);
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.release();
run_one_scan_loop();
EXPECT_TRUE(layer_state_is(0));
@@ -317,8 +307,7 @@ TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) {
set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}});
/* Tap TT five times . */
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(9);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.press();
run_one_scan_loop();
diff --git a/tests/basic/test_keypress.cpp b/tests/basic/test_keypress.cpp
index 1c175c9d56..044fc29378 100644
--- a/tests/basic/test_keypress.cpp
+++ b/tests/basic/test_keypress.cpp
@@ -85,7 +85,7 @@ TEST_F(KeyPress, CorrectKeysAreReportedWhenTwoKeysArePressed) {
TEST_F(KeyPress, LeftShiftIsReportedCorrectly) {
TestDriver driver;
auto key_a = KeymapKey(0, 0, 0, KC_A);
- auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT);
+ auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT);
set_keymap({key_a, key_lsft});
@@ -110,8 +110,8 @@ TEST_F(KeyPress, LeftShiftIsReportedCorrectly) {
TEST_F(KeyPress, PressLeftShiftAndControl) {
TestDriver driver;
- auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT);
- auto key_lctrl = KeymapKey(0, 5, 0, KC_LCTRL);
+ auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT);
+ auto key_lctrl = KeymapKey(0, 5, 0, KC_LEFT_CTRL);
set_keymap({key_lctrl, key_lsft});
@@ -138,8 +138,8 @@ TEST_F(KeyPress, PressLeftShiftAndControl) {
TEST_F(KeyPress, LeftAndRightShiftCanBePressedAtTheSameTime) {
TestDriver driver;
- auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT);
- auto key_rsft = KeymapKey(0, 4, 0, KC_RSFT);
+ auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT);
+ auto key_rsft = KeymapKey(0, 4, 0, KC_RIGHT_SHIFT);
set_keymap({key_rsft, key_lsft});
@@ -175,12 +175,12 @@ TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) {
// The underlying cause is that we use only one bit to represent the right hand
// modifiers.
combo_key.press();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL)));
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL, KC_O)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL, KC_O)));
keyboard_task();
combo_key.release();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
keyboard_task();
}
@@ -189,18 +189,18 @@ TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) {
TestDriver driver;
InSequence s;
auto key_plus = KeymapKey(0, 1, 1, KC_PLUS);
- auto key_eql = KeymapKey(0, 0, 1, KC_EQL);
+ auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL);
set_keymap({key_plus, key_eql});
key_plus.press();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL)));
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
key_plus.release();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
@@ -220,13 +220,13 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) {
TestDriver driver;
InSequence s;
auto key_plus = KeymapKey(0, 1, 1, KC_PLUS);
- auto key_eql = KeymapKey(0, 0, 1, KC_EQL);
+ auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL);
set_keymap({key_plus, key_eql});
key_plus.press();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL)));
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
@@ -237,14 +237,13 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) {
testing::Mock::VerifyAndClearExpectations(&driver);
key_plus.release();
- // BUG: Should really still return KC_EQL, but this is fine too
- // It's also called twice for some reason
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2);
+ // BUG: Should really still return KC_EQUAL, but this is fine too
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1);
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
key_eql.release();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
}
@@ -253,12 +252,12 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) {
TestDriver driver;
InSequence s;
auto key_plus = KeymapKey(0, 1, 1, KC_PLUS);
- auto key_eql = KeymapKey(0, 0, 1, KC_EQL);
+ auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL);
set_keymap({key_plus, key_eql});
key_eql.press();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL)));
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
@@ -268,13 +267,13 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) {
testing::Mock::VerifyAndClearExpectations(&driver);
key_plus.press();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL)));
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
key_plus.release();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
@@ -284,12 +283,12 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) {
TestDriver driver;
InSequence s;
auto key_plus = KeymapKey(0, 1, 1, KC_PLUS);
- auto key_eql = KeymapKey(0, 0, 1, KC_EQL);
+ auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL);
set_keymap({key_plus, key_eql});
key_eql.press();
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL)));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL)));
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
@@ -309,9 +308,7 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) {
testing::Mock::VerifyAndClearExpectations(&driver);
key_plus.release();
- // This report is not needed
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
-} \ No newline at end of file
+}
diff --git a/tests/basic/test_one_shot_keys.cpp b/tests/basic/test_one_shot_keys.cpp
index 98178912e4..43fc3e1ba3 100644
--- a/tests/basic/test_one_shot_keys.cpp
+++ b/tests/basic/test_one_shot_keys.cpp
@@ -175,22 +175,20 @@ TEST_F(OneShot, OSLWithAdditionalKeypress) {
testing::Mock::VerifyAndClearExpectations(&driver);
/* Release OSL key */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
osl_key.release();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
/* Press regular key */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(2);
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
+ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(1);
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
regular_key.press();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
/* Release regular key */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
regular_key.release();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
diff --git a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp
index ab9dd1518b..00c2b33cb7 100644
--- a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp
+++ b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp
@@ -117,7 +117,6 @@ TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) {
testing::Mock::VerifyAndClearExpectations(&driver);
/* Release regular key */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(layer_key.report_code)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
regular_key.release();
@@ -125,7 +124,7 @@ TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) {
testing::Mock::VerifyAndClearExpectations(&driver);
/* Release layer-tap-hold key */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_tap_hold_key.release();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp
index 67f394653f..67706f80dc 100644
--- a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp
+++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp
@@ -119,7 +119,6 @@ TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key
testing::Mock::VerifyAndClearExpectations(&driver);
/* Release regular key */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
regular_key.release();
@@ -127,7 +126,7 @@ TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key
testing::Mock::VerifyAndClearExpectations(&driver);
/* Release layer-tap-hold key */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_tap_hold_key.release();
run_one_scan_loop();
testing::Mock::VerifyAndClearExpectations(&driver);
diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp
index 02416eed73..54e7daa22c 100644
--- a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp
+++ b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp
@@ -31,9 +31,8 @@ TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) {
set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}});
/* Tap TT five times . */
- /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */
/* TODO: Tapping Force Hold breaks TT */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(10);
+ EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0);
layer_key.press();
run_one_scan_loop();
diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp
index cb68429617..3ae7c4ccfd 100644
--- a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp
+++ b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp
@@ -60,7 +60,6 @@ TEST_F(TappingForceHold, tap_regular_key_while_mod_tap_key_is_held) {
testing::Mock::VerifyAndClearExpectations(&driver);
/* Idle for tapping term of mod tap hold key. */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
@@ -101,7 +100,6 @@ TEST_F(TappingForceHold, tap_mod_tap_key_while_mod_tap_key_is_held) {
testing::Mock::VerifyAndClearExpectations(&driver);
/* Idle for tapping term of first mod tap hold key. */
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT)));
EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport()));
diff --git a/tests/test_common/test_fixture.cpp b/tests/test_common/test_fixture.cpp
index 0601b17191..91bf3e779e 100644
--- a/tests/test_common/test_fixture.cpp
+++ b/tests/test_common/test_fixture.cpp
@@ -48,7 +48,6 @@ void TestFixture::SetUpTestCase() {
eeconfig_update_debug(debug_config.raw);
TestDriver driver;
- EXPECT_CALL(driver, send_keyboard_mock(_));
keyboard_init();
test_logger.info() << "TestFixture setup-up end." << std::endl;
@@ -62,8 +61,6 @@ TestFixture::~TestFixture() {
test_logger.info() << "TestFixture clean-up start." << std::endl;
TestDriver driver;
- EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2);
-
/* Reset keyboard state. */
clear_all_keys();
diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
index e1749f872d..319ff8487d 100644
--- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
+++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h
@@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define _ARM_ATSAM_PROTOCOL_H_
#include "samd51j18a.h"
-#include "md_bootloader.h"
#include "timer.h"
#include "d51_util.h"
diff --git a/tmk_core/protocol/arm_atsam/md_bootloader.h b/tmk_core/protocol/arm_atsam/md_bootloader.h
deleted file mode 100644
index 362b9bd52a..0000000000
--- a/tmk_core/protocol/arm_atsam/md_bootloader.h
+++ /dev/null
@@ -1,24 +0,0 @@
-#ifndef _MD_BOOTLOADER_H_
-#define _MD_BOOTLOADER_H_
-
-extern uint32_t _srom;
-extern uint32_t _lrom;
-extern uint32_t _erom;
-
-#define BOOTLOADER_SERIAL_MAX_SIZE 20 // DO NOT MODIFY!
-
-#ifdef KEYBOARD_massdrop_ctrl
-// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support
-extern uint32_t _eram;
-# define BOOTLOADER_MAGIC 0x3B9ACA00
-# define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4)
-#endif
-
-#ifdef MD_BOOTLOADER
-
-# define MCU_HZ 48000000
-# define I2C_HZ 0 // Not used
-
-#endif // MD_BOOTLOADER
-
-#endif //_MD_BOOTLOADER_H_
diff --git a/tmk_core/protocol/arm_atsam/startup.c b/tmk_core/protocol/arm_atsam/startup.c
index 7a5791ab55..ce043bad51 100644
--- a/tmk_core/protocol/arm_atsam/startup.c
+++ b/tmk_core/protocol/arm_atsam/startup.c
@@ -28,7 +28,6 @@
*/
#include "samd51.h"
-#include "md_bootloader.h"
/* Initialize segments */
extern uint32_t _sfixed;
@@ -496,6 +495,11 @@ __attribute__((section(".vectors"))) const DeviceVectors exception_table = {
#endif
};
+// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support
+extern uint32_t _eram;
+#define BOOTLOADER_MAGIC 0x3B9ACA00
+#define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4)
+
/**
* \brief This is the code that gets called on processor reset.
* To initialize the device, and call the main() routine.
diff --git a/tmk_core/protocol/arm_atsam/usb/udc.c b/tmk_core/protocol/arm_atsam/usb/udc.c
index d04e9b7b28..1f0c0d95d6 100644
--- a/tmk_core/protocol/arm_atsam/usb/udc.c
+++ b/tmk_core/protocol/arm_atsam/usb/udc.c
@@ -51,7 +51,8 @@
#include "udi_device_conf.h"
#include "udi.h"
#include "udc.h"
-#include "md_bootloader.h"
+
+#define BOOTLOADER_SERIAL_MAX_SIZE 20 // DO NOT MODIFY!
/**
* \ingroup udc_group
@@ -122,6 +123,8 @@ static uint8_t udc_string_product_name[] = USB_DEVICE_PRODUCT_NAME;
# define USB_DEVICE_SERIAL_NAME_SIZE 0
#endif
+extern uint32_t _srom;
+
uint8_t usb_device_serial_name_size = 0;
#if defined USB_DEVICE_SERIAL_USE_BOOTLOADER_SERIAL
uint8_t bootloader_serial_number[BOOTLOADER_SERIAL_MAX_SIZE + 1] = "";
diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c
index e3be96d93d..b9c2616058 100644
--- a/tmk_core/protocol/lufa/lufa.c
+++ b/tmk_core/protocol/lufa/lufa.c
@@ -69,8 +69,8 @@ extern keymap_config_t keymap_config;
# include "outputselect.h"
# ifdef MODULE_ADAFRUIT_BLE
# include "adafruit_ble.h"
-# else
-# include "../serial.h"
+# elif MODULE_RN42
+# include "rn42.h"
# endif
#endif
@@ -90,46 +90,6 @@ extern keymap_config_t keymap_config;
# include "joystick.h"
#endif
-// https://cdn.sparkfun.com/datasheets/Wireless/Bluetooth/bluetooth_cr_UG-v1.0r.pdf#G7.663734
-static inline uint16_t CONSUMER2RN42(uint16_t usage) {
- switch (usage) {
- case AC_HOME:
- return 0x0001;
- case AL_EMAIL:
- return 0x0002;
- case AC_SEARCH:
- return 0x0004;
- case AL_KEYBOARD_LAYOUT:
- return 0x0008;
- case AUDIO_VOL_UP:
- return 0x0010;
- case AUDIO_VOL_DOWN:
- return 0x0020;
- case AUDIO_MUTE:
- return 0x0040;
- case TRANSPORT_PLAY_PAUSE:
- return 0x0080;
- case TRANSPORT_NEXT_TRACK:
- return 0x0100;
- case TRANSPORT_PREV_TRACK:
- return 0x0200;
- case TRANSPORT_STOP:
- return 0x0400;
- case TRANSPORT_EJECT:
- return 0x0800;
- case TRANSPORT_FAST_FORWARD:
- return 0x1000;
- case TRANSPORT_REWIND:
- return 0x2000;
- case TRANSPORT_STOP_EJECT:
- return 0x4000;
- case AL_LOCAL_BROWSER:
- return 0x8000;
- default:
- return 0;
- }
-}
-
uint8_t keyboard_idle = 0;
/* 0: Boot Protocol, 1: Report Protocol(default) */
uint8_t keyboard_protocol = 1;
@@ -688,14 +648,7 @@ static void send_keyboard(report_keyboard_t *report) {
# ifdef MODULE_ADAFRUIT_BLE
adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys));
# elif MODULE_RN42
- serial_send(0xFD);
- serial_send(0x09);
- serial_send(0x01);
- serial_send(report->mods);
- serial_send(report->reserved);
- for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) {
- serial_send(report->keys[i]);
- }
+ rn42_send_keyboard(report);
# endif
return;
}
@@ -741,16 +694,8 @@ static void send_mouse(report_mouse_t *report) {
# ifdef MODULE_ADAFRUIT_BLE
// FIXME: mouse buttons
adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons);
-# else
- serial_send(0xFD);
- serial_send(0x00);
- serial_send(0x03);
- serial_send(report->buttons);
- serial_send(report->x);
- serial_send(report->y);
- serial_send(report->v); // should try sending the wheel v here
- serial_send(report->h); // should try sending the wheel h here
- serial_send(0x00);
+# elif MODULE_RN42
+ rn42_send_mouse(report);
# endif
return;
}
@@ -821,15 +766,7 @@ static void send_consumer(uint16_t data) {
# ifdef MODULE_ADAFRUIT_BLE
adafruit_ble_send_consumer_key(data);
# elif MODULE_RN42
- static uint16_t last_data = 0;
- if (data == last_data) return;
- last_data = data;
- uint16_t bitmap = CONSUMER2RN42(data);
- serial_send(0xFD);
- serial_send(0x03);
- serial_send(0x03);
- serial_send(bitmap & 0xFF);
- serial_send((bitmap >> 8) & 0xFF);
+ rn42_send_consumer(data);
# endif
return;
}
@@ -1077,7 +1014,7 @@ void protocol_pre_init(void) {
sei();
#if defined(MODULE_RN42)
- serial_init();
+ rn42_init();
#endif
/* wait for USB startup & debug output */
diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c
index a43755f899..0b992ba6c5 100644
--- a/tmk_core/protocol/usb_descriptor.c
+++ b/tmk_core/protocol/usb_descriptor.c
@@ -450,7 +450,7 @@ const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = {
#endif
#ifndef USB_POLLING_INTERVAL_MS
-# define USB_POLLING_INTERVAL_MS 10
+# define USB_POLLING_INTERVAL_MS 1
#endif
/*
diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c
index bd0f1c21aa..8bdcccc9c9 100644
--- a/tmk_core/protocol/vusb/vusb.c
+++ b/tmk_core/protocol/vusb/vusb.c
@@ -647,7 +647,6 @@ const PROGMEM uchar console_hid_report[] = {
# define USB_MAX_POWER_CONSUMPTION 500
#endif
-// TODO: change this to 10ms to match LUFA
#ifndef USB_POLLING_INTERVAL_MS
# define USB_POLLING_INTERVAL_MS 1
#endif
diff --git a/users/vitoni/readme.adoc b/users/vitoni/readme.adoc
new file mode 100644
index 0000000000..acf65793d2
--- /dev/null
+++ b/users/vitoni/readme.adoc
@@ -0,0 +1,16 @@
+= User functions
+
+Functions are mostly related to changing the RGB lights depending on user interaction and when idling.
+
+== utils.h
+
+Common functions are declared in link:utils.h[]. These function are not directly RGB related but used to modify state and calculate values.
+
+== rgb_matrix_effects.h
+
+Functions in link:rgb_matrix_effects.h[] make use of common function in `utils.h` and are used to create to RGB matrix effects such as fading or breathing.
+
+== vitoni.h
+
+The functions declared in link:vitoni.h[] are used as entry points for usage of RGB effects.
+One entry point is `matrix_scan` based for regular task while the other is `process_record` based for user activity tasks.
diff --git a/users/vitoni/rgb_matrix_effects.c b/users/vitoni/rgb_matrix_effects.c
new file mode 100644
index 0000000000..3a13e99bc7
--- /dev/null
+++ b/users/vitoni/rgb_matrix_effects.c
@@ -0,0 +1,236 @@
+// Copyright 2021 Victor Toni (@vitoni)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "rgb_matrix_effects.h"
+
+#include <rgb_matrix.h>
+#include <lib/lib8tion/lib8tion.h>
+
+#include "utils.h"
+
+/*
+ Offset used to start at the right point in th curve to avoid big jumps in brightness
+ 0 => 0% (signed) => 50% (unsigned)
+ 64 => 100% (signed) => 100% (unsigned)
+ 128 => 0% (signed) => 50% (unsigned)
+ 192 => -100% (signed) => 0% (unsigned)
+*/
+enum PHASE {
+ PHASE_ZERO_RAISING
+ ,PHASE_HIGH
+ ,PHASE_ZERO_FALLING
+ ,PHASE_LOW
+};
+
+/**
+ * @brief Calculates the offset so that a specific time is aligned to a specific point in the sine curve.
+ * @param[in] time The time for which the offset shopuld be calculated.
+ * @param[in] phase Phase which should be reached with the offset
+ * @see PHASE
+ */
+uint8_t offset_for_time(const uint8_t time, const uint8_t phase) {
+ switch (phase) {
+ case PHASE_ZERO_RAISING:
+ return 0 - time;
+ case PHASE_HIGH:
+ return 64 - time;
+ case PHASE_ZERO_FALLING:
+ return 128 - time;
+ case PHASE_LOW:
+ return 192 - time;
+ default:
+ return 0;
+ }
+}
+
+/**
+ * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects.
+ * @return scaled down timer
+ * @see rgb_time_2_scale_w_factor()
+ */
+uint8_t rgb_time_2_scale(void) {
+ static const uint8_t factor = 1;
+ return rgb_time_2_scale_w_factor(factor);
+}
+
+/*
+ * Used to slow down RGB speed.
+ */
+static const uint8_t rgb_speed_divisor = 8;
+
+/**
+ * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects.
+ * @details Usually these calculations aredone internally by some RGB effects.
+ This method exposed to scaling so that all effects to have same timebase. If `rgb_matrix_config.speed` all effects are affected the same.
+ * @param[in] factor The factor can be used to speed up some operations in relation to others.
+ * @return scaled down timer taking into account the given factor
+ * @see g_rgb_timer
+ * @see rgb_matrix_config.speed
+ */
+uint8_t rgb_time_2_scale_w_factor(const uint8_t rgb_speed_factor) {
+ const uint8_t scaled_time = scale16by8(g_rgb_timer, rgb_matrix_config.speed * rgb_speed_factor / rgb_speed_divisor);
+
+ return scaled_time;
+}
+
+/**
+ * @brief Inverse function to calculate time required to execute `timer` steps.
+ * @details This method allows calculation of the time needed to execute N `timer`steps.
+ Usefull when using a scaled down time but requiring the time needed to perform these steps.
+ * @param[in] scaled_time scaled down timer to inverse to time
+ * @return time corresponding to scaled down time
+ * @see rgb_time_2_scale()
+ */
+uint16_t scale_2_rgb_time(const uint8_t scaled_time) {
+ const uint16_t time = scaled_time * rgb_speed_divisor * UINT8_MAX / rgb_matrix_config.speed;
+
+ return time;
+}
+
+bool fade_in_ranged(const uint8_t time, const uint8_t range_min, const uint8_t range_max) {
+ static const uint8_t max_delta = 1;
+ return scaled_sin_up(time, range_min, range_max, max_delta, &(rgb_matrix_config.hsv.v));
+}
+
+bool fade_out_ranged(const uint8_t time, const uint8_t range_min, const uint8_t range_max) {
+ static const uint8_t max_delta = 1;
+ return scaled_sin_down(time, range_min, range_max, max_delta, &(rgb_matrix_config.hsv.v));
+}
+
+/**
+ * @brief Convenience method to eventually skip the value part when setting HSV.
+ * @details When setting HSV this includes the value/brightness.
+ As changing brightness might interfer with fading or breathing effects,
+ this method can skip the value part of HSV (depending on the preprocessor flag: RGB_FADE_IN).
+ * @param[in] hue Hue
+ * @param[in] sat Saturation
+ * @param[in] hue Value (brightness)
+ * @see rgb_matrix_sethsv_noeeprom()
+ */
+void rgb_matrix_sethsv_noeeprom_user(const uint16_t hue, const uint8_t sat, const uint8_t val) {
+#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT)
+ rgb_matrix_config.hsv.h = hue;
+ rgb_matrix_config.hsv.s = sat;
+ // omitting setting the value to avoid interfering with effects
+// rgb_matrix_config.hsv.v = val;
+#else
+ rgb_matrix_sethsv_noeeprom(hue, sat, val);
+#endif
+}
+
+#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT)
+/**
+ * @brief Calculates the time offset required by fade in.
+ * @details Using an arbitrary timer any point on the sine curve might be pointed to.
+ * The offest is calculated so that
+ * a) the point is at the lowest point in the curve and the curve is raising
+ * b) the point is near the current brightness (eg. fade in might be called while fading out and the lowest value has not yet been reached).
+ * @param[in] time Current time usually represented by (usually scaled) timer
+ * @return Offset required so that time matches the current brightness
+ */
+uint8_t calc_fade_in_offset(const uint8_t time) {
+ static const uint8_t max_steps = UINT8_MAX/2;
+ static const uint8_t range_min = 0;
+ static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+
+ // start at the right point in the sine curve
+ uint8_t time_offset = offset_for_time(time, PHASE_LOW);
+
+ // find the right offset to match the current brightness
+ for (int i = 1; i < max_steps; i++) {
+ const uint8_t value = scaled_sin(time + time_offset + 1, range_min, range_max);
+ if (in_range(value, range_min, range_max) && value < rgb_matrix_config.hsv.v) {
+ time_offset++;
+ } else {
+ break;
+ }
+ }
+
+ return time_offset;
+}
+
+/**
+ * @brief Increases value/brightness until reaching RGB_MATRIX_MAXIMUM_BRIGHTNESS based on given timer.
+ * @param[in] time A (usually scaled) timer
+ * @return Returns `true` if RGB_MATRIX_MAXIMUM_BRIGHTNESS has been reached, `false` otherwise.
+ */
+bool fade_in(const uint8_t time) {
+ static const uint8_t range_min = 0;
+ static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+
+ return fade_in_ranged(time, range_min, range_max);
+}
+#endif
+
+#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT)
+/**
+ * @brief Calculates the time offset required by fade out.
+ * @details Using an arbitrary timer any point on the Sinus curve might be pointed to.
+ * The offest is calculated so that
+ * a) the point is at the highest point in the curve and the curve is failing
+ * b) the point is near the current brightness (eg. fade out might be called while on breath effect).
+ * @param[in] time Current time usually represented by a(usually scaled) timer
+ * @return Offset required so that time matches the current brightness
+ */
+uint8_t calc_fade_out_offset(const uint8_t time) {
+ static const uint8_t range_min = 0;
+ static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+
+ // start at the right point in the sin() curve
+ uint8_t time_offset = offset_for_time(time, PHASE_HIGH);
+
+ // find the right offset to match the current brightness
+ for (int i = 1; i < 127; i++) {
+ const uint8_t value = scaled_sin(time + time_offset + 1, range_min, range_max);
+ if (in_range(value, range_min, range_max) && rgb_matrix_config.hsv.v < value) {
+ time_offset++;
+ } else {
+ break;
+ }
+ }
+
+ return time_offset;
+}
+#endif
+
+#if defined(RGB_DISABLE_WITH_FADE_OUT)
+/**
+ * @brief Decreases value/brightness until reaching 0 based on given timer.
+ * @param[in] time A (usually scaled) timer
+ * @return Returns `true` if 0 has been reached, `false` otherwise.
+ */
+bool fade_out(const uint8_t time) {
+ static const uint8_t range_min = 0;
+ static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+
+ return fade_out_ranged(time, range_min, range_max);
+}
+#endif
+
+#if defined(RGB_IDLE_TIMEOUT)
+/**
+ * @brief Decreases value/brightness until reaching `RGB_IDLE_MINIMUM_BRIGHTNESS` based on given timer.
+ * @param[in] time A (usually scaled) timer
+ * @return Returns `true` if `RGB_IDLE_MINIMUM_BRIGHTNESS` has been reached, `false` otherwise.
+ */
+bool idle_fade_out(const uint8_t time) {
+ static const uint8_t range_min = RGB_IDLE_MINIMUM_BRIGHTNESS;
+ static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
+
+ return fade_out_ranged(time, range_min, range_max);
+}
+
+#if defined(RGB_IDLE_BREATHE)
+/**
+ * @brief Changes value/brightness to create a breathing effect based on given timer.
+ * @details Brightness will breathe in the range starting from `RGB_IDLE_MINIMUM_BRIGHTNESS` to `RGB_IDLE_MAXIMUM_BRIGHTNESS`.
+ * @param[in] time A (usually scaled) timer
+ */
+void idle_breathe(const uint8_t time) {
+ static const uint8_t range_min = RGB_IDLE_MINIMUM_BRIGHTNESS;
+ static const uint8_t range_max = RGB_IDLE_MAXIMUM_BRIGHTNESS;
+
+ rgb_matrix_config.hsv.v = scaled_sin(time, range_min, range_max);
+}
+#endif // RGB_IDLE_BREATHE
+#endif // RGB_IDLE_TIMEOUT
diff --git a/users/vitoni/rgb_matrix_effects.h b/users/vitoni/rgb_matrix_effects.h
new file mode 100644
index 0000000000..ed74500b18
--- /dev/null
+++ b/users/vitoni/rgb_matrix_effects.h
@@ -0,0 +1,174 @@
+// Copyright 2021 Victor Toni (@vitoni)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/**
+ * States reflecting the state of the keyboard.
+ * Dependeing on these states various effects can set for the RGB matrix.
+ */
+enum states {
+ REGULAR //!< when in regular use
+#if defined(RGB_IDLE_TIMEOUT)
+ ,IDLE_FADE_OUT //!< when started idling
+ ,IDLE //!< when idling
+#endif
+#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT)
+ ,FADE_IN //!< when starting initially or before going back to REGULAR
+#endif
+#if defined(RGB_DISABLE_WITH_FADE_OUT)
+ ,FADE_OUT //!< before supending
+#endif
+ ,SUSPENDED //!< expecting to be suspended by RGB_DISABLE_TIMEOUT any time
+};
+
+/**
+ * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects.
+ * @details Usually these calculations aredone internally by some RGB effects.
+ This method exposed to scaling so that all effects to have same timebase. If `rgb_matrix_config.speed` all effects are affected the same.
+ * @param[in] factor The factor can be used to speed up some operations in relation to others.
+ * @return scaled down timer taking into account the given factor
+ * @see g_rgb_timer
+ * @see rgb_matrix_config.speed
+ */
+uint8_t rgb_time_2_scale_w_factor(const uint8_t factor);
+
+/**
+ * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects.
+ * @return scaled down timer
+ * @see rgb_time_2_scale_w_factor()
+ */
+uint8_t rgb_time_2_scale(void);
+
+/**
+ * @brief Inverse function to calculate time required to execute `timer` steps.
+ * @details This method allows calculation of the time needed to execute N `timer`steps.
+ Usefull when using a scaled down time but requiring the time needed to perform these steps.
+ * @param[in] scaled_time scaled down timer to inverse to time
+ * @return time corresponding to scaled down time
+ * @see rgb_time_2_scale()
+ */
+uint16_t scale_2_rgb_time(const uint8_t scaled_time);
+
+/**
+ * @brief Convenience method to eventually skip the value part when setting HSV.
+ * @details When setting HSV this includes the value/brightness.
+ As changing brightness might interfer with fading or breathing effects,
+ this method can skip the value part of HSV (depending on the preprocessor flag: RGB_FADE_IN).
+ * @param[in] hue Hue
+ * @param[in] sat Saturation
+ * @param[in] hue Value (brightness)
+ * @see rgb_matrix_sethsv_noeeprom()
+ */
+void rgb_matrix_sethsv_noeeprom_user(const uint16_t hue, const uint8_t sat, const uint8_t val);
+
+#if defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT)
+# if defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS)
+# if (RGB_MATRIX_MAXIMUM_BRIGHTNESS) < 1
+# error "RGB_MATRIX_MAXIMUM_BRIGHTNESS must not be less than ONE"
+# endif
+# if UINT8_MAX < (RGB_MATRIX_MAXIMUM_BRIGHTNESS)
+# error "RGB_MATRIX_MAXIMUM_BRIGHTNESS must not be larger than UINT8_MAX"
+# endif
+# else
+# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
+# endif
+#endif
+
+#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT)
+/**
+ * @brief Calculates the time offset required by fade in.
+ * @details Using an arbitrary timer any point on the sine curve might be pointed to.
+ * The offset is calculated so that
+ * a) the point is at the lowest point in the curve and the curve is raising
+ * b) the point is near the current brightness (eg. fade in might be called while fading out and the lowest value has not yet been reached).
+ * @param[in] time Current time usually represented by a(usually scaled) timer
+ * @return Offset required so that time matches the current brightness
+ */
+uint8_t calc_fade_in_offset(const uint8_t time);
+
+/**
+ * @brief Increases value/brightness until reaching RGB_MATRIX_MAXIMUM_BRIGHTNESS based on given timer.
+ * @param[in] time A (usually scaled) timer
+ * @return Returns `true` if RGB_MATRIX_MAXIMUM_BRIGHTNESS has been reached, `false` otherwise.
+ */
+bool fade_in(const uint8_t time);
+#endif
+
+#if defined(RGB_DISABLE_WITH_FADE_OUT)
+# if !defined(RGB_DISABLE_TIMEOUT)
+# warning "RGB_DISABLE_WITH_FADE_OUT expects RGB_DISABLE_TIMEOUT to be defined"
+# endif
+#endif
+
+#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT)
+/**
+ * @brief Calculates the time offset required by fade out.
+ * @details Using an arbitrary timer any point on the Sinus curve might be pointed to.
+ * The offest is calculated so that
+ * a) the point is at the highest point in the curve and the curve is failing
+ * b) the point is near the current brightness (eg. fade out might be called while on breath effect).
+ * @param[in] time Current time usually represented by a(usually scaled) timer
+ * @return Offset required so that time matches the current brightness
+ */
+uint8_t calc_fade_out_offset(const uint8_t time);
+#endif
+
+#if defined(RGB_DISABLE_WITH_FADE_OUT)
+/**
+ * @brief Decreases value/brightness until reaching 0 based on given timer.
+ * @param[in] time A (usually scaled) timer
+ * @return Returns `true` if 0 has been reached, `false` otherwise.
+ */
+bool fade_out(const uint8_t time);
+#endif
+
+#if defined(RGB_IDLE_TIMEOUT)
+# if RGB_IDLE_TIMEOUT < 0
+# error "RGB_IDLE_TIMEOUT must not be less than ZERO"
+# endif
+# if !defined(RGB_IDLE_MINIMUM_BRIGHTNESS)
+ // minimum brightness when idling
+# define RGB_IDLE_MINIMUM_BRIGHTNESS (RGB_MATRIX_MAXIMUM_BRIGHTNESS/5)
+# endif
+# if RGB_IDLE_MINIMUM_BRIGHTNESS < 0
+# error "RGB_IDLE_MINIMUM_BRIGHTNESS must not be less than ZERO"
+# endif // RGB_IDLE_MINIMUM_BRIGHTNESS < 0
+# if RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS
+# error "RGB_IDLE_MINIMUM_BRIGHTNESS must be less than RGB_MATRIX_MAXIMUM_BRIGHTNESS"
+# endif // RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS
+
+/**
+ * @brief Decreases value/brightness until reaching `RGB_IDLE_MINIMUM_BRIGHTNESS` based on given timer.
+ * @param[in] time A (usually scaled) timer
+ * @return Returns `true` if `RGB_IDLE_MINIMUM_BRIGHTNESS` has been reached, `false` otherwise.
+ */
+bool idle_fade_out(const uint8_t time);
+
+#if defined(RGB_IDLE_BREATHE)
+# if !defined(RGB_IDLE_MAXIMUM_BRIGHTNESS)
+ // maximum brightness when idling
+# define RGB_IDLE_MAXIMUM_BRIGHTNESS (RGB_MATRIX_MAXIMUM_BRIGHTNESS*3/5)
+# endif
+# if !(0 <= RGB_IDLE_MAXIMUM_BRIGHTNESS)
+# error "RGB_IDLE_MINIMUM_BRIGHTNESS must not be less than ZERO, was: " RGB_IDLE_MAXIMUM_BRIGHTNESS
+# endif // RGB_IDLE_MAXIMUM_BRIGHTNESS < 0
+# if !(RGB_IDLE_MINIMUM_BRIGHTNESS < RGB_IDLE_MAXIMUM_BRIGHTNESS)
+# error "RGB_IDLE_MINIMUM_BRIGHTNESS must be less than RGB_IDLE_MAXIMUM_BRIGHTNESS"
+# endif // RGB_IDLE_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS
+# if !(RGB_IDLE_MAXIMUM_BRIGHTNESS <= RGB_MATRIX_MAXIMUM_BRIGHTNESS)
+# error "RGB_IDLE_MAXIMUM_BRIGHTNESS must be less than or equal to RGB_MATRIX_MAXIMUM_BRIGHTNESS"
+# endif // RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MAXIMUM_BRIGHTNESS
+
+/**
+ * @brief Changes value/brightness to create a breathing effect based on given timer.
+ * @details Brightness will breathe in the range starting from `RGB_IDLE_MINIMUM_BRIGHTNESS` to `RGB_IDLE_MAXIMUM_BRIGHTNESS`.
+ * @param[in] time A (usually scaled) timer
+ */
+void idle_breathe(const uint8_t time);
+#endif // RGB_IDLE_BREATHE
+
+#endif // RGB_IDLE_TIMEOUT
diff --git a/users/vitoni/rules.mk b/users/vitoni/rules.mk
new file mode 100644
index 0000000000..2f3b0d15e5
--- /dev/null
+++ b/users/vitoni/rules.mk
@@ -0,0 +1,4 @@
+SRC += \
+ vitoni.c \
+ utils.c \
+ rgb_matrix_effects.c
diff --git a/users/vitoni/utils.c b/users/vitoni/utils.c
new file mode 100644
index 0000000000..fb011570e4
--- /dev/null
+++ b/users/vitoni/utils.c
@@ -0,0 +1,129 @@
+// Copyright 2021 Victor Toni (@vitoni)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "utils.h"
+
+#include <lib/lib8tion/lib8tion.h>
+
+/**
+* @brief Changes `*value` to `new_value`.
+* @param[in,out] value Pointer to variable to be changed.
+* @param[in] new_value Value to be changed.
+* @param[in,out] changed Flag indicating `*value` and `new_value` were different.
+*/
+void update_value(uint8_t *value, const uint8_t new_value, bool *changed) {
+ if (new_value != (*value)) {
+ (*changed) = true;
+ (*value) = new_value;
+ }
+}
+
+/**
+* @brief Checks whether a value is in the given range.
+* @param[in] value Value to be checked.
+* @param[in] range_min Lower bound of range (inclusive).
+* @param[in] range_max Upper bound of range (inclusive).
+* @return `true` if (range_min <= value <= range_max), `false` otherwise
+*/
+bool in_range(const uint8_t value, const uint8_t range_min, const uint8_t range_max) {
+ return range_min <= value && value <= range_max;
+}
+
+/**
+* @brief Calculates the sine value based on sin8() and scales it to the given range (unsigned).
+*
+* Table of values for unscaled sin8() eg. a theta of 0 results to 128 and a theta of 255 (240+15) results to 125.
+ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+ +----------------------------------------------------------------
+ 0: 128 131 134 137 140 143 146 149 152 155 158 161 164 167 170 173
+ 16: 177 179 182 184 187 189 192 194 197 200 202 205 207 210 212 215
+ 32: 218 219 221 223 224 226 228 229 231 233 234 236 238 239 241 243
+ 48: 245 245 246 246 247 248 248 249 250 250 251 251 252 253 253 254
+ 64: 255 254 253 253 252 251 251 250 250 249 248 248 247 246 246 245
+ 80: 245 243 241 239 238 236 234 233 231 229 228 226 224 223 221 219
+ 96: 218 215 212 210 207 205 202 200 197 194 192 189 187 184 182 179
+ 112: 177 173 170 167 164 161 158 155 152 149 146 143 140 137 134 131
+ 128: 128 125 122 119 116 113 110 107 104 101 98 95 92 89 86 83
+ 144: 79 77 74 72 69 67 64 62 59 56 54 51 49 46 44 41
+ 160: 38 37 35 33 32 30 28 27 25 23 22 20 18 17 15 13
+ 176: 11 11 10 10 9 8 8 7 6 6 5 5 4 3 3 2
+ 192: 1 2 3 3 4 5 5 6 6 7 8 8 9 10 10 11
+ 208: 11 13 15 17 18 20 22 23 25 27 28 30 32 33 35 37
+ 224: 38 41 44 46 49 51 54 56 59 62 64 67 69 72 74 77
+ 240: 79 83 86 89 92 95 98 101 104 107 110 113 116 119 122 125
+*
+* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation.
+* @param[in] range_min Lower bound of range (inclusive).
+* @param[in] range_max Upper bound of range (inclusive).
+* @return Calculated sine value mapped to the given range.
+*/
+uint8_t scaled_sin(const uint8_t theta, const uint8_t range_min, const uint8_t range_max) {
+ const uint8_t range = range_max - range_min;
+ return scale8(sin8(theta), range) + range_min;
+}
+
+/**
+* @brief Increases the given value until reaching range_max.
+* The increments occur following an upwards sine wave (scaled from range_min to range_max).
+* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation.
+* @param[in] range_min Lower bound of range (inclusive).
+* @param[in] range_max Upper bound of range (inclusive).
+* @param[in] max_delta Maximum delta between value and range_max (due to values being integers and eventually not fully matching).
+* @param[in,out] value Reference of variable to be increased
+* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise
+* @see scaled_sin()
+*/
+bool scaled_sin_up(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value) {
+ // ensure upper range bound
+ if (range_max <= (*value)) {
+ (*value) = range_max;
+ return true;
+ }
+
+ const uint8_t new_value = scaled_sin(theta, range_min, range_max);
+ if (in_range(new_value, range_min, range_max) && (*value) < new_value) {
+ (*value) = new_value;
+
+ return range_max == (*value);
+ }
+
+ const uint8_t delta = range_max - (*value);
+ if (delta <= max_delta) {
+ (*value) = range_max;
+ }
+
+ return delta <= max_delta;
+}
+
+/**
+* @brief Decreases the given value until reaching range_min.
+* The decrements occur following an downwards sinus wave (scaled from range_min to range_max).
+* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sinus calculation.
+* @param[in] range_min Lower bound of range (inclusive).
+* @param[in] range_max Upper bound of range (inclusive).
+* @param[in] max_delta Maximum delta between value and range_min (due to values being integers and eventually not fully matching).
+* @param[in,out] value Reference of variable to be decreased
+* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise
+* @see scaled_sin()
+*/
+bool scaled_sin_down(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value) {
+ // ensure lower range bound
+ if ((*value) <= range_min) {
+ (*value) = range_min;
+ return true;
+ }
+
+ const uint8_t new_value = scaled_sin(theta, range_min, range_max);
+ if (in_range(new_value, range_min, range_max) && new_value < (*value)) {
+ (*value) = new_value;
+
+ return range_min == (*value);
+ }
+
+ const uint8_t delta = (*value) - range_min;
+ if (delta <= max_delta) {
+ (*value) = range_min;
+ }
+
+ return delta <= max_delta;
+}
diff --git a/users/vitoni/utils.h b/users/vitoni/utils.h
new file mode 100644
index 0000000000..987b612d58
--- /dev/null
+++ b/users/vitoni/utils.h
@@ -0,0 +1,80 @@
+// Copyright 2021 Victor Toni (@vitoni)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/**
+* @brief Changes `*value` to `new_value`.
+* @param[in,out] value Pointer to variable to be changed.
+* @param[in] new_value Value to be changed.
+* @param[in,out] changed Flag indicating `*value` and `new_value` were different.
+*/
+void update_value(uint8_t *value, const uint8_t new_value, bool *changed);
+
+/**
+* @brief Checks whether a value is in the given range.
+* @param[in] value Value to be checked.
+* @param[in] range_min Lower bound of range (inclusive).
+* @param[in] range_max Upper bound of range (inclusive).
+* @return `true` if (range_min <= value <= range_max), `false` otherwise
+*/
+bool in_range(const uint8_t value, const uint8_t range_min, const uint8_t range_max);
+
+/**
+* @brief Calculates the sine value based on sin8() and scales it to the given range (unsigned).
+*
+* Table of values for unscaled sin8() eg. a theta of 0 results to 128 and a theta of 255 (240+15) results to 125.
+ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+ +----------------------------------------------------------------
+ 0: 128 131 134 137 140 143 146 149 152 155 158 161 164 167 170 173
+ 16: 177 179 182 184 187 189 192 194 197 200 202 205 207 210 212 215
+ 32: 218 219 221 223 224 226 228 229 231 233 234 236 238 239 241 243
+ 48: 245 245 246 246 247 248 248 249 250 250 251 251 252 253 253 254
+ 64: 255 254 253 253 252 251 251 250 250 249 248 248 247 246 246 245
+ 80: 245 243 241 239 238 236 234 233 231 229 228 226 224 223 221 219
+ 96: 218 215 212 210 207 205 202 200 197 194 192 189 187 184 182 179
+ 112: 177 173 170 167 164 161 158 155 152 149 146 143 140 137 134 131
+ 128: 128 125 122 119 116 113 110 107 104 101 98 95 92 89 86 83
+ 144: 79 77 74 72 69 67 64 62 59 56 54 51 49 46 44 41
+ 160: 38 37 35 33 32 30 28 27 25 23 22 20 18 17 15 13
+ 176: 11 11 10 10 9 8 8 7 6 6 5 5 4 3 3 2
+ 192: 1 2 3 3 4 5 5 6 6 7 8 8 9 10 10 11
+ 208: 11 13 15 17 18 20 22 23 25 27 28 30 32 33 35 37
+ 224: 38 41 44 46 49 51 54 56 59 62 64 67 69 72 74 77
+ 240: 79 83 86 89 92 95 98 101 104 107 110 113 116 119 122 125
+*
+* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation.
+* @param[in] range_min Lower bound of range (inclusive).
+* @param[in] range_max Upper bound of range (inclusive).
+* @return Calculated sine value mapped to the given range.
+*/
+uint8_t scaled_sin(const uint8_t theta, const uint8_t range_min, const uint8_t range_max);
+
+/**
+* @brief Increases the given value until reaching range_max.
+* The increments occur following an upwards sine wave (scaled from range_min to range_max).
+* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation.
+* @param[in] range_min Lower bound of range (inclusive).
+* @param[in] range_max Upper bound of range (inclusive).
+* @param[in] max_delta Maximum delta between value and range_max (due to values being integers and eventually not fully matching).
+* @param[in,out] value Reference of variable to be increased
+* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise
+* @see scaled_sin()
+*/
+bool scaled_sin_up(const uint8_t thea, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value);
+
+/**
+* @brief Decreases the given value until reaching range_min.
+* The decrements occur following an downwards sinus wave (scaled from range_min to range_max).
+* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sinus calculation.
+* @param[in] range_min Lower bound of range (inclusive).
+* @param[in] range_max Upper bound of range (inclusive).
+* @param[in] max_delta Maximum delta between value and range_min (due to values being integers and eventually not fully matching).
+* @param[in,out] value Reference of variable to be decreased
+* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise
+* @see scaled_sin()
+*/
+bool scaled_sin_down(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value);
diff --git a/users/vitoni/vitoni.c b/users/vitoni/vitoni.c
new file mode 100644
index 0000000000..2a0ff5c46f
--- /dev/null
+++ b/users/vitoni/vitoni.c
@@ -0,0 +1,131 @@
+// Copyright 2021 Victor Toni (@vitoni)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "vitoni.h"
+
+#include <rgb_matrix.h>
+#include <lib/lib8tion/lib8tion.h>
+
+#include "rgb_matrix_effects.h"
+#include "utils.h"
+
+#if defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT)
+static uint8_t state;
+
+// flag used to indicate that offset calculation is needed to adjust the timer,
+// so that it matches the index used for sine calculation
+static bool calc_offset;
+
+void matrix_scan_user_rgb(void) {
+#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT)
+ const uint8_t time = rgb_time_2_scale();
+#endif
+ static uint8_t time_offset;
+
+ const uint32_t inactivity_millis = last_input_activity_elapsed();
+
+#if defined(RGB_IDLE_TIMEOUT)
+ if (IDLE != state && RGB_IDLE_TIMEOUT <= inactivity_millis) {
+ update_value(&state, IDLE_FADE_OUT, &calc_offset);
+ }
+#endif
+#if defined(RGB_DISABLE_WITH_FADE_OUT)
+ const uint32_t fade_out_duration = scale_2_rgb_time(128);
+ const uint32_t start_fade_out_after_millis = (RGB_DISABLE_TIMEOUT) > fade_out_duration
+ ? (RGB_DISABLE_TIMEOUT) - fade_out_duration
+ : 0;
+
+ if (start_fade_out_after_millis <= inactivity_millis) {
+ update_value(&state, FADE_OUT, &calc_offset);
+ }
+#elif defined(RGB_DISABLE_TIMEOUT)
+ // having to set brightness "manually" to black as starting point for fade in
+ // for the time when returning from suspended state
+ if (RGB_DISABLE_TIMEOUT <= inactivity_millis + 15) {
+ rgb_matrix_config.hsv.v = 0;
+ state = SUSPENDED;
+ }
+#endif
+
+ switch(state) {
+#if defined(RGB_IDLE_TIMEOUT)
+ case IDLE_FADE_OUT:
+ if (calc_offset) {
+ time_offset = calc_fade_out_offset(time);
+
+ // resetting flag for subsequent calls
+ calc_offset = false;
+ }
+ if (idle_fade_out(time + time_offset)) {
+ update_value(&state, IDLE, &calc_offset);
+ }
+ break;
+ case IDLE:
+#if defined(RGB_IDLE_BREATHE)
+ if (calc_offset) {
+ // no need to calculate time_offset since we are aligned already due to IDLE_FADE_OUT
+ // resetting flag for subsequent calls
+ calc_offset = false;
+ }
+ idle_breathe(time + time_offset);
+#endif
+ break;
+#endif
+#if defined(RGB_DISABLE_WITH_FADE_OUT)
+ case FADE_OUT:
+ if (calc_offset) {
+ time_offset = calc_fade_out_offset(time);
+
+ // resetting flag for subsequent calls
+ calc_offset = false;
+ }
+ if (fade_out(time + time_offset)) {
+ update_value(&state, SUSPENDED, &calc_offset);
+ }
+ break;
+#endif
+#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT)
+ case FADE_IN:
+ {
+ // since we want to be active, fade in should be faster than e.g. fading out
+ const uint8_t fade_in_time = rgb_time_2_scale_w_factor(4);
+ if (calc_offset) {
+ time_offset = calc_fade_in_offset(fade_in_time);
+
+ // resetting flag for subsequent calls
+ calc_offset = false;
+ }
+ if (fade_in(fade_in_time + time_offset)) {
+ update_value(&state, REGULAR, &calc_offset);
+ }
+ }
+ break;
+#endif
+ default:
+ break;
+ }
+}
+
+#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT)
+bool process_record_user_rgb(const uint16_t keycode, const keyrecord_t *record) {
+ // if we are in a non regular state we might have faded out (eventually partially)
+ // so we restore brightness (to max as we don't keep track of manually changed brightness)
+ // if (REGULAR != state && FADE_IN != state) {
+ if (FADE_IN != state && REGULAR != state) {
+ update_value(&state, FADE_IN, &calc_offset);
+ }
+
+ return true; // Process all other keycodes normally
+}
+
+void suspend_wakeup_init_user(void) {
+ if (FADE_IN != state) {
+ // setting brightness to black as starting point for fade in
+ rgb_matrix_config.hsv.v = 0;
+
+ update_value(&state, FADE_IN, &calc_offset);
+ }
+}
+#endif // defined(RGB_FADE_IN)
+
+#endif // defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT)
diff --git a/users/vitoni/vitoni.h b/users/vitoni/vitoni.h
new file mode 100644
index 0000000000..1f26037135
--- /dev/null
+++ b/users/vitoni/vitoni.h
@@ -0,0 +1,30 @@
+// Copyright 2021 Victor Toni (@vitoni)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#include <quantum/action.h>
+
+#include "rgb_matrix_effects.h"
+
+/**
+ * @brief Executes periodic tasks, eg. fading or checking for upcoming supend.
+ * @details Function declaration as weak as the implementation might "disappear" depending on the RGB settings used.
+ * The weak declaration avoids having to change `keymap.c`.
+ */
+__attribute__((weak))
+void matrix_scan_user_rgb(void);
+
+/**
+ * @brief Executes tasks based on user activity, eg. fading in.
+ * @details Function declaration as weak as the implementation might "disappear" depending on the RGB settings used.
+ * The weak declaration avoids having to change `keymap.c`.
+ * @param[in] keycode
+ * @param[in] record
+ * @return `false` if further processing should be stopped, `true` otherwise
+ */
+__attribute__((weak))
+bool process_record_user_rgb(const uint16_t keycode, const keyrecord_t *record);
diff --git a/util/update_chibios_mirror.sh b/util/update_chibios_mirror.sh
index 0bf648ebfd..e6666c55c9 100755
--- a/util/update_chibios_mirror.sh
+++ b/util/update_chibios_mirror.sh
@@ -4,13 +4,13 @@
# Configuration
# The ChibiOS branches to mirror
-chibios_branches="trunk stable_20.3.x stable_21.6.x"
+chibios_branches="trunk stable_20.3.x stable_21.11.x"
# The ChibiOS tags to mirror
-chibios_tags="ver20.3.1 ver20.3.2 ver20.3.3 ver20.3.4 ver21.6.0"
+chibios_tags="ver20.3.1 ver20.3.2 ver20.3.3 ver20.3.4 ver21.11.1"
# The ChibiOS-Contrib branches to mirror
-contrib_branches="chibios-20.3.x chibios-21.6.x"
+contrib_branches="chibios-20.3.x chibios-21.11.x"
################################
# Actions
@@ -88,5 +88,5 @@ echo "Updating ChibiOS-Contrib branches..."
for branch in $contrib_branches ; do
echo "Creating branch 'mirror/$branch' from 'upstream/$branch'..."
git branch -f mirror/$branch upstream/$branch \
- && git push qmk mirror/$branch
+ && git push qmk mirror/$branch || true # Allow for nonexistent ChibiOS-Contrib branches -- they'll turn up eventually.
done