diff options
| -rw-r--r-- | keyboards/hecomi/alpha/config.h | 23 | ||||
| -rw-r--r-- | keyboards/hecomi/alpha/rules.mk | 6 | ||||
| -rw-r--r-- | keyboards/hecomi/config.h | 246 | ||||
| -rw-r--r-- | keyboards/hecomi/keymaps/default/keymap.c | 23 |
4 files changed, 35 insertions, 263 deletions
diff --git a/keyboards/hecomi/alpha/config.h b/keyboards/hecomi/alpha/config.h index 40bb8c2f05..8a65f146b0 100644 --- a/keyboards/hecomi/alpha/config.h +++ b/keyboards/hecomi/alpha/config.h @@ -45,7 +45,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { C6,D7,E6,B4,B5 } #define MATRIX_COL_PINS { F4,F5,F6,F7,B1,B3,B2,B6 } #define UNUSED_PINS -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 +#define SOFT_SERIAL_PIN D1 // or D1, D2, D3, E6 //#define USE_I2C /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ @@ -62,20 +62,20 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define RGB_DI_PIN D4 #ifdef RGB_DI_PIN - #define RGBLED_NUM 8 + #define RGBLED_NUM 16 #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 /*== or choose animations ==*/ - #define RGBLIGHT_EFFECT_BREATHING - #define RGBLIGHT_EFFECT_RAINBOW_MOOD - #define RGBLIGHT_EFFECT_RAINBOW_SWIRL - #define RGBLIGHT_EFFECT_SNAKE - #define RGBLIGHT_EFFECT_KNIGHT - #define RGBLIGHT_EFFECT_CHRISTMAS - #define RGBLIGHT_EFFECT_STATIC_GRADIENT - #define RGBLIGHT_EFFECT_RGB_TEST - #define RGBLIGHT_EFFECT_ALTERNATING +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ @@ -244,3 +244,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MASTER_LEFT #define EEHANDS */ +#define RGBLED_SPLIT {8,8} diff --git a/keyboards/hecomi/alpha/rules.mk b/keyboards/hecomi/alpha/rules.mk index ae9192be37..3e726f1d6c 100644 --- a/keyboards/hecomi/alpha/rules.mk +++ b/keyboards/hecomi/alpha/rules.mk @@ -62,8 +62,8 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration @@ -72,7 +72,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/hecomi/config.h b/keyboards/hecomi/config.h deleted file mode 100644 index 40bb8c2f05..0000000000 --- a/keyboards/hecomi/config.h +++ /dev/null @@ -1,246 +0,0 @@ -/* -Copyright 2018 takashiski - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 -#define DEVICE_VER 0x0001 -#define MANUFACTURER takashiski -#define PRODUCT hecomi_alpha -#define DESCRIPTION asymmetric split keyboard - -/* key matrix size */ -//#define MATRIX_ROWS 5 -#define MATRIX_ROWS 10 -#define MATRIX_COLS 8 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { C6,D7,E6,B4,B5 } -#define MATRIX_COL_PINS { F4,F5,F6,F7,B1,B3,B2,B6 } -#define UNUSED_PINS -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 -//#define USE_I2C - -/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ -#define DIODE_DIRECTION COL2ROW - -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, an3 define SOFT_SERIAL_PIN. - */ -//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 - -// #define BACKLIGHT_PIN B7 -// #define BACKLIGHT_BREATHING -// #define BACKLIGHT_LEVELS 3 - - #define RGB_DI_PIN D4 - #ifdef RGB_DI_PIN - #define RGBLED_NUM 8 - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 - /*== or choose animations ==*/ - #define RGBLIGHT_EFFECT_BREATHING - #define RGBLIGHT_EFFECT_RAINBOW_MOOD - #define RGBLIGHT_EFFECT_RAINBOW_SWIRL - #define RGBLIGHT_EFFECT_SNAKE - #define RGBLIGHT_EFFECT_KNIGHT - #define RGBLIGHT_EFFECT_CHRISTMAS - #define RGBLIGHT_EFFECT_STATIC_GRADIENT - #define RGBLIGHT_EFFECT_RGB_TEST - #define RGBLIGHT_EFFECT_ALTERNATING - #endif - -/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 - -/* define if matrix has ghost (lacks anti-ghosting diodes) */ -//#define MATRIX_HAS_GHOST - -/* number of backlight levels */ - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. - * This is userful for the Windows task manager shortcut (ctrl+shift+esc). - */ -// #define GRAVE_ESC_CTRL_OVERRIDE - -/* - * Force NKRO - * - * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved - * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the - * makefile for this to work.) - * - * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) - * until the next keyboard reset. - * - * NKRO may prevent your keystrokes from being detected in the BIOS, but it is - * fully operational during normal computer usage. - * - * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) - * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by - * bootmagic, NKRO mode will always be enabled until it is toggled again during a - * power-up. - * - */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - -/* - * Feature disable options - * These options are also useful to firmware size reduction. - */ - -/* disable debug print */ -//#define NO_DEBUG - -/* disable print */ -//#define NO_PRINT - -/* disable action features */ -//#define NO_ACTION_LAYER -//#define NO_ACTION_TAPPING -//#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION - -/* - * MIDI options - */ - -/* Prevent use of disabled MIDI features in the keymap */ -//#define MIDI_ENABLE_STRICT 1 - -/* enable basic MIDI features: - - MIDI notes can be sent when in Music mode is on -*/ -//#define MIDI_BASIC - -/* enable advanced MIDI features: - - MIDI notes can be added to the keymap - - Octave shift and transpose - - Virtual sustain, portamento, and modulation wheel - - etc. -*/ -//#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 1 - -/* - * HD44780 LCD Display Configuration - */ -/* -#define LCD_LINES 2 //< number of visible lines of the display -#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display - -#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode - -#if LCD_IO_MODE -#define LCD_PORT PORTB //< port for the LCD lines -#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 -#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 -#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 -#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 -#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 -#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 -#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 -#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 -#define LCD_RS_PORT LCD_PORT //< port for RS line -#define LCD_RS_PIN 3 //< pin for RS line -#define LCD_RW_PORT LCD_PORT //< port for RW line -#define LCD_RW_PIN 2 //< pin for RW line -#define LCD_E_PORT LCD_PORT //< port for Enable line -#define LCD_E_PIN 1 //< pin for Enable line -#endif -*/ - -/* Bootmagic Lite key configuration */ -// #define BOOTMAGIC_LITE_ROW 0 -// #define BOOTMAGIC_LITE_COLUMN 0 -// -/* -#define USE_I2C -#define MASTER_LEFT -#define EEHANDS -*/ diff --git a/keyboards/hecomi/keymaps/default/keymap.c b/keyboards/hecomi/keymaps/default/keymap.c index 25bddb7df2..505966fbeb 100644 --- a/keyboards/hecomi/keymaps/default/keymap.c +++ b/keyboards/hecomi/keymaps/default/keymap.c @@ -39,15 +39,15 @@ enum layers{ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [DF]=LAYOUT(\ KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6, KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_NUHS,KC_GRV,\ - KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_DEL,\ + KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSPC,\ KC_LCTRL ,KC_A,KC_S,KC_D,KC_F,KC_G, KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_ENT,\ KC_LSFT ,KC_Z,KC_X,KC_C,KC_V,KC_B, KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_RSFT,KC_FN,\ KC_LCTRL,KC_LGUI,KC_LALT,KC_MHEN,KC_BSPC,KC_SPC, KC_ENT,KC_ESC,KC_HENK,KC_RALT,KC_RGUI,KC_RCTRL\ ), [FN]=LAYOUT(\ KC_ESC,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6, KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_INS,KC_DEL,\ - KC_TAB ,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y, KC_Y,KC_U,KC_PSCR,KC_SLCK,KC_PAUSE,KC_UP,KC_RBRC,KC_BSPC,\ - KC_CAPS ,KC_A,KC_S,KC_D,KC_F,KC_G, KC_SFT(KC_8),KC_SLSH,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_ENT,\ + KC_TAB ,KC_9,KC_7,KC_5,KC_3,KC_1,KC_Y, KC_Y,KC_U,KC_PSCR,KC_SLCK,KC_PAUSE,KC_UP,KC_RBRC,KC_BSPC,\ + KC_CAPS ,KC_8,KC_6,KC_4,KC_2,KC_0, KC_SFT(KC_8),KC_SLSH,KC_HOME,KC_PGUP,KC_LEFT,KC_RIGHT,KC_ENT,\ KC_LSFT ,KC_Z,KC_X,KC_C,KC_V,KC_B, KC_B,KC_SFT(KC_EQL),KC_MINS,KC_END,KC_PGDN,KC_DOWN,KC_RSFT,KC_TRNS,\ KC_LCTRL,KC_LGUI,KC_LALT,KC_MHEN,KC_BSPC,KC_SPC, KC_ENT,KC_ESC,KC_HENK,KC_RALT,KC_RGUI,KC_RCTRL\ ), @@ -75,6 +75,23 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } +uint32_t layer_state_set_user(uint32_t state) +{ + uint8_t layer=biton32(state); + switch(layer) + { + case DF: + rgblight_sethsv_noeeprom(180,255,255); + break; + case FN: + rgblight_sethsv_noeeprom(0,255,255); + break; + default: + break; + } + return state; +} + void matrix_init_user(void) { } |