diff options
64 files changed, 2236 insertions, 8 deletions
diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index 61d76cfc2a..bd7fb36589 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -150,7 +150,8 @@ The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for su |`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | |`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | |`PMW3360_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | -|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 127 degrees directly in the sensor. | `0` | +|`PMW3360_LIFTOFF_DISTANCE` | (Optional) Sets the lift off distance at run time | `0x02` | +|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0` | The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI. diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 80852fd62c..c378bdf750 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -186,6 +186,8 @@ bool pmw3360_init(void) { spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -127, 127)); + spi_write_adv(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE); + bool init_success = pmw3360_check_signature(); writePinLow(PMW3360_CS_PIN); diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 7b2bef5b80..9aa8e13f8e 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -46,6 +46,10 @@ # endif #endif +#ifndef PMW3360_LIFTOFF_DISTANCE +# define PMW3360_LIFTOFF_DISTANCE 0x02 +#endif + #ifndef ROTATIONAL_TRANSFORM_ANGLE # define ROTATIONAL_TRANSFORM_ANGLE 0x00 #endif diff --git a/keyboards/kprepublic/bm60hsrgb/readme.md b/keyboards/kprepublic/bm60hsrgb/readme.md index bbb6ba45a1..1f0f13ae28 100644 --- a/keyboards/kprepublic/bm60hsrgb/readme.md +++ b/keyboards/kprepublic/bm60hsrgb/readme.md @@ -2,12 +2,15 @@ A 60% hotswap inswitch RGB keyboard from KP Republic. -* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) * Hardware Supported: BM60HSRGB * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c) Make example for this keyboard (after setting up your build environment): - make kprepublic/bm60hsrgb/rev1:default + for rev1: make kprepublic/bm60hsrgb/rev1:default + for rev2: make kprepublic/bm60hsrgb/rev2:default + +To see which revision you have, look at the PCB. If it says bm60v2 on it, it's rev2. Otherwise it's rev1 + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm60hsrgb/keymaps/default/keymap.c b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/default/keymap.c index e8be1cccf6..e8be1cccf6 100644 --- a/keyboards/kprepublic/bm60hsrgb/keymaps/default/keymap.c +++ b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm60hsrgb/keymaps/default/readme.md b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/default/readme.md index d45609f3d7..d45609f3d7 100644 --- a/keyboards/kprepublic/bm60hsrgb/keymaps/default/readme.md +++ b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/default/readme.md diff --git a/keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/keymap.c b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/jbradforddillon/keymap.c index c43365356e..c43365356e 100644 --- a/keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/keymap.c +++ b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/jbradforddillon/keymap.c diff --git a/keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/readme.md b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/jbradforddillon/readme.md index aa2009e1e8..aa2009e1e8 100644 --- a/keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/readme.md +++ b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/jbradforddillon/readme.md diff --git a/keyboards/kprepublic/bm60hsrgb/keymaps/via/keymap.c b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/keymap.c index da2f6e8ced..da2f6e8ced 100644 --- a/keyboards/kprepublic/bm60hsrgb/keymaps/via/keymap.c +++ b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm60hsrgb/keymaps/via/readme.md b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/readme.md index 9335f2cab0..9335f2cab0 100644 --- a/keyboards/kprepublic/bm60hsrgb/keymaps/via/readme.md +++ b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/readme.md diff --git a/keyboards/kprepublic/bm60hsrgb/keymaps/via/rules.mk b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/rules.mk index 036bd6d1c3..036bd6d1c3 100644 --- a/keyboards/kprepublic/bm60hsrgb/keymaps/via/rules.mk +++ b/keyboards/kprepublic/bm60hsrgb/rev1/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm60hsrgb/rev1/readme.md b/keyboards/kprepublic/bm60hsrgb/rev1/readme.md new file mode 100644 index 0000000000..bdc0380129 --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev1/readme.md @@ -0,0 +1,13 @@ +# BM60HSRGB + +A 60% hotswap inswitch RGB keyboard from KP Republic. + +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: BM60HSRGB/rev1 +* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c) + +Make example for this keyboard (after setting up your build environment): + + make kprepublic/bm60hsrgb/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/config.h b/keyboards/kprepublic/bm60hsrgb/rev2/config.h new file mode 100644 index 0000000000..e25f0ad489 --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/config.h @@ -0,0 +1,139 @@ +/* Copyright 2021 bdtc123 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B50 +#define PRODUCT_ID 0x1121 +#define DEVICE_VER 0x0002 +#define MANUFACTURER KP Republic +#define PRODUCT BM60V2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { E6, D2, D3, D5, F6 } +#define MATRIX_COL_PINS { B2, B3, B7, B0, B1, F7, D4, D6, D7, B4, B5, B6, C6, C7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL +#define USB_POLLING_INTERVAL_MS 1 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION +//rgb light setting +#define RGBLIGHT_LIMIT_VAL 150 +#define RGBLED_NUM 6 +#define RGB_DI_PIN F0 +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended +#define DRIVER_ADDR_1 0b1010000 + +#define RGB_MATRIX_KEYPRESSES +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +#define DRIVER_COUNT 2 +#define DRIVER_1_LED_TOTAL 63 +//#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL + +#if defined(RGB_MATRIX_ENABLE) && defined(RGBLIGHT_ENABLE) + #define RGB_MATRIX_DISABLE_KEYCODES +#endif + +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 + +#define ISSI_LED_TOTAL DRIVER_1_LED_TOTAL + +// Underglow LEDs are WS2812, but someone might want to use RGBLIGHT for them; +// don't use those LEDs in RGB Matrix in that case. +#ifdef RGBLIGHT_ENABLE +# define WS2812_LED_TOTAL 0 +#else +# define WS2812_LED_TOTAL 6 +#endif + +#define DRIVER_LED_TOTAL (ISSI_LED_TOTAL + WS2812_LED_TOTAL) + +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_KEYPRESSES +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#endif + diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/info.json b/keyboards/kprepublic/bm60hsrgb/rev2/info.json new file mode 100644 index 0000000000..51a6fbc880 --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/info.json @@ -0,0 +1,78 @@ +{ + "keyboard_name": "bm60v2", + "url": "", + "maintainer": "kp republic", + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4}, + {"x":11, "y":4}, + {"x":12, "y":4}, + {"x":13, "y":4}, + {"x":14, "y":4} + ] + } + } +} diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/default/keymap.c b/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/default/keymap.c new file mode 100644 index 0000000000..58828d5181 --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 bdtc123 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/keymap.c b/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/keymap.c new file mode 100644 index 0000000000..cca11326d0 --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2021 bdtc123 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RESET, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/rules.mk b/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/readme.md b/keyboards/kprepublic/bm60hsrgb/rev2/readme.md new file mode 100644 index 0000000000..14d33b058e --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/readme.md @@ -0,0 +1,13 @@ +# BM60HSRGB + +A 60% hotswap inswitch RGB keyboard from KP Republic. + +* Keyboard Maintainer: [bdtc123](https://github.com/bdtc123) +* Hardware Supported: BM60HSRGB/rev2 +* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c) + +Make example for this keyboard (after setting up your build environment): + + make kprepublic/bm60hsrgb/rev2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/rev2.c b/keyboards/kprepublic/bm60hsrgb/rev2/rev2.c new file mode 100644 index 0000000000..4fe8480691 --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/rev2.c @@ -0,0 +1,200 @@ +/* Copyright 2021 bdtc123 + * Copyright 2021 sigprof + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "rev2.h" + +#ifdef RGB_MATRIX_ENABLE + +# include "i2c_master.h" +# include "is31fl3733.h" +# include "ws2812.h" + +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { + { 0, B_1, A_1, C_1 }, + { 0, B_2, A_2, C_2 }, + { 0, B_3, A_3, C_3 }, + { 0, B_4, A_4, C_4 }, + { 0, B_5, A_5, C_5 }, + { 0, B_6, A_6, C_6 }, + { 0, B_7, A_7, C_7 }, + { 0, B_8, A_8, C_8 }, + { 0, B_9, A_9, C_9 }, + { 0, B_10, A_10, C_10 }, + { 0, B_11, A_11, C_11 }, + { 0, B_12, A_12, C_12 }, + { 0, B_13, A_13, C_13 }, + { 0, B_14, A_14, C_14 }, + + { 0, E_1, D_1, F_1 }, + { 0, E_2, D_2, F_2 }, + { 0, E_3, D_3, F_3 }, + { 0, E_4, D_4, F_4 }, + { 0, E_5, D_5, F_5 }, + { 0, E_6, D_6, F_6 }, + { 0, E_7, D_7, F_7 }, + { 0, E_8, D_8, F_8 }, + { 0, E_9, D_9, F_9 }, + { 0, E_10, D_10, F_10 }, + { 0, E_11, D_11, F_11 }, + { 0, E_12, D_12, F_12 }, + { 0, E_13, D_13, F_13 }, + { 0, E_14, D_14, F_14 }, + + { 0, H_1, G_1, I_1 }, + { 0, H_2, G_2, I_2 }, + { 0, H_3, G_3, I_3 }, + { 0, H_4, G_4, I_4 }, + { 0, H_5, G_5, I_5 }, + { 0, H_6, G_6, I_6 }, + { 0, H_7, G_7, I_7 }, + { 0, H_8, G_8, I_8 }, + { 0, H_9, G_9, I_9 }, + { 0, H_10, G_10, I_10 }, + { 0, H_11, G_11, I_11 }, + { 0, H_12, G_12, I_12 }, + { 0, H_14, G_14, I_14 }, + + { 0, K_1, J_1, L_1 }, + { 0, K_2, J_2, L_2 }, + { 0, K_3, J_3, L_3 }, + { 0, K_4, J_4, L_4 }, + { 0, K_5, J_5, L_5 }, + { 0, K_6, J_6, L_6 }, + { 0, K_7, J_7, L_7 }, + { 0, K_8, J_8, L_8 }, + { 0, K_9, J_9, L_9 }, + { 0, K_10, J_10, L_10 }, + { 0, K_12, J_12, L_12 }, + { 0, K_13, J_13, L_13 }, + { 0, K_14, J_14, L_14 }, + + { 0, H_16, G_16, I_16 }, + { 0, H_15, G_15, I_15 }, + { 0, H_13, G_13, I_13 }, + { 0, E_15, D_15, F_15 }, + { 0, K_15, J_15, L_15 }, + { 0, K_11, J_11, L_11 }, + { 0, K_16, J_16, L_16 }, + { 0, B_16, A_16, C_16 }, + { 0, E_16, D_16, F_16 } +}; + +led_config_t g_led_config = { + { + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, + { 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27 }, + { 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, NO_LED, 40 }, + { 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, NO_LED, 51, 52, 53 }, + { 54, 55, 56, NO_LED, NO_LED, 57, NO_LED, NO_LED, NO_LED, 58, 59, 60, 61, 62 } + }, { + // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace + { 0, 0 }, { 15, 0 }, { 30, 0 }, { 45, 0 }, { 60, 0 }, { 75, 0 }, { 90, 0 }, { 105, 0 }, { 120, 0 }, { 135, 0 }, { 150, 0 }, { 165, 0 }, { 180, 0 }, { 202, 0 }, + // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], , + { 7, 16 }, { 22, 16 }, { 37, 16 }, { 52, 16 }, { 67, 16 }, { 82, 16 }, { 97, 16 }, { 112, 16 }, { 127, 16 }, { 142, 16 }, { 157, 16 }, { 172, 16 }, { 187, 16 }, { 206, 16 }, + // Capslock, A, S, D, F, G, H, A, K, L, ;, ', Enter + { 11, 32 }, { 26, 32 }, { 41, 32 }, { 56, 32 }, { 71, 32 }, { 86, 32 }, { 101, 32 }, { 116, 32 }, { 131, 32 }, { 146, 32 }, { 161, 32 }, { 176, 32 }, { 198, 32 }, + // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, + { 18, 48 }, { 30, 48 }, { 45, 48 }, { 60, 48 }, { 75, 48 }, { 90, 48 }, { 105, 48 }, { 120, 48 }, { 135, 48 }, { 150, 48 }, { 165, 48 }, { 191, 48 }, { 210, 48 }, + // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right + { 3, 64 }, { 22, 64 }, { 33, 64 }, { 101, 64 }, { 135, 64 }, { 153, 64 }, { 195, 64 }, { 210, 64 }, { 225, 64 } +# if WS2812_LED_TOTAL > 0 + ,{ 28, 40}, { 62, 40}, { 96, 40}, {130, 40}, {164, 40}, {198, 40} +# endif +}, { + // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + // Capslock, A, S, D, F, G, H, A, K, L, ;, ', Enter + 9, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, ? + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 4, + // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right + 1, 1, 1, 4, 1, 1, 1, 1, 1 +# if WS2812_LED_TOTAL > 0 + ,2, 2, 2, 2, 2, 2 +# endif + } +}; + +__attribute__ ((weak)) +void rgb_matrix_indicators_user(void) { + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color(28, 0xFF, 0xFF, 0xFF); + } +} + + +// clang-format on + +// ========================================================================== +// Custom RGB Matrix driver that combines IS31FL3733 and WS2812 +// ========================================================================== + +# if WS2812_LED_TOTAL > 0 +LED_TYPE rgb_matrix_ws2812_array[WS2812_LED_TOTAL]; +# endif + +static void rgb_matrix_driver_init(void) { + i2c_init(); + IS31FL3733_init(DRIVER_ADDR_1, 0); + for (uint8_t index = 0; index < ISSI_LED_TOTAL; index++) { + bool enabled = true; + IS31FL3733_set_led_control_register(index, enabled, enabled, enabled); + } + IS31FL3733_update_led_control_registers(DRIVER_ADDR_1, 0); +} + +static void rgb_matrix_driver_flush(void) { + IS31FL3733_update_pwm_buffers(DRIVER_ADDR_1, 0); +# if WS2812_LED_TOTAL > 0 + ws2812_setleds(rgb_matrix_ws2812_array, WS2812_LED_TOTAL); +# endif +} + +static void rgb_matrix_driver_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + if (index < ISSI_LED_TOTAL) { + IS31FL3733_set_color(index, red, green, blue); + } else { +# if WS2812_LED_TOTAL > 0 + rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].r = red; + rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].g = green; + rgb_matrix_ws2812_array[index - ISSI_LED_TOTAL].b = blue; +# endif + } +} + +static void rgb_matrix_driver_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + IS31FL3733_set_color_all(red, green, blue); +# if WS2812_LED_TOTAL > 0 + for (uint8_t i = 0; i < WS2812_LED_TOTAL; i++) { + rgb_matrix_ws2812_array[i].r = red; + rgb_matrix_ws2812_array[i].g = green; + rgb_matrix_ws2812_array[i].b = blue; + } +# endif +} + +// clang-format off +const rgb_matrix_driver_t rgb_matrix_driver = { + .init = rgb_matrix_driver_init, + .flush = rgb_matrix_driver_flush, + .set_color = rgb_matrix_driver_set_color, + .set_color_all = rgb_matrix_driver_set_color_all, +}; +// clang-format on + +#endif /* RGB_MATRIX_ENABLE */ diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/rev2.h b/keyboards/kprepublic/bm60hsrgb/rev2/rev2.h new file mode 100644 index 0000000000..de1df85666 --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/rev2.h @@ -0,0 +1,32 @@ +/* Copyright 2021 bdtc123 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3B, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, KC_NO, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D }, \ +} diff --git a/keyboards/kprepublic/bm60hsrgb/rev2/rules.mk b/keyboards/kprepublic/bm60hsrgb/rev2/rules.mk new file mode 100644 index 0000000000..f307812917 --- /dev/null +++ b/keyboards/kprepublic/bm60hsrgb/rev2/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +NO_USB_STARTUP_CHECK = no +LTO_ENABLE = yes +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = custom +WS2812_DRIVER_REQUIRED = yes + +COMMON_VPATH += $(DRIVER_PATH)/led/issi +SRC += is31fl3733.c +QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/mechwild/waka60/config.h b/keyboards/mechwild/waka60/config.h new file mode 100644 index 0000000000..636e13de38 --- /dev/null +++ b/keyboards/mechwild/waka60/config.h @@ -0,0 +1,143 @@ +/* +Copyright 2021 Kyle McCreery + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6D77 // mw = "MechWild" +#define PRODUCT_ID 0x1709 +#define DEVICE_VER 0x0101 +#define MANUFACTURER MechWild +#define PRODUCT Waka60 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 7 + +#define EEPROM_I2C_24LC64 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B8, B4, B3, B9, A15, B12, B13, B14, B15, A8 } +#define MATRIX_COL_PINS { B10, B1, B0, A7, A6, A5, A4 } +#define UNUSED_PINS + +/* encoder pins */ +#define ENCODERS_PAD_A { A3 } +#define ENCODERS_PAD_B { A2 } + +/* encoder resolution */ +#define ENCODER_RESOLUTION 4 +#define TAP_CODE_DELAY 10 + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* RGB settings, uncomment this define to enable RGB */ +#define RGB_DI_PIN A1 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 3 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mechwild/waka60/f401/halconf.h b/keyboards/mechwild/waka60/f401/halconf.h new file mode 100644 index 0000000000..25309fc70f --- /dev/null +++ b/keyboards/mechwild/waka60/f401/halconf.h @@ -0,0 +1,25 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_I2C TRUE +#define HAL_USE_PWM TRUE +#define HAL_USE_PAL TRUE +#define HAL_USE_GPT TRUE + +#include_next <halconf.h> + diff --git a/keyboards/mechwild/waka60/f401/mcuconf.h b/keyboards/mechwild/waka60/f401/mcuconf.h new file mode 100644 index 0000000000..95339690cf --- /dev/null +++ b/keyboards/mechwild/waka60/f401/mcuconf.h @@ -0,0 +1,27 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE
\ No newline at end of file diff --git a/keyboards/mechwild/waka60/f401/rules.mk b/keyboards/mechwild/waka60/f401/rules.mk new file mode 100644 index 0000000000..f1304648f0 --- /dev/null +++ b/keyboards/mechwild/waka60/f401/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = STM32F401 + +# Bootloader selection +BOOTLOADER = stm32-dfu diff --git a/keyboards/mechwild/waka60/f411/halconf.h b/keyboards/mechwild/waka60/f411/halconf.h new file mode 100644 index 0000000000..b57977316a --- /dev/null +++ b/keyboards/mechwild/waka60/f411/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define HAL_USE_I2C TRUE + +#include_next <halconf.h> + diff --git a/keyboards/mechwild/waka60/f411/mcuconf.h b/keyboards/mechwild/waka60/f411/mcuconf.h new file mode 100644 index 0000000000..a00131aca5 --- /dev/null +++ b/keyboards/mechwild/waka60/f411/mcuconf.h @@ -0,0 +1,23 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + diff --git a/keyboards/mechwild/waka60/f411/rules.mk b/keyboards/mechwild/waka60/f411/rules.mk new file mode 100644 index 0000000000..b32a8b7f5b --- /dev/null +++ b/keyboards/mechwild/waka60/f411/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = STM32F411 + +# Bootloader selection +BOOTLOADER = stm32-dfu diff --git a/keyboards/mechwild/waka60/info.json b/keyboards/mechwild/waka60/info.json new file mode 100644 index 0000000000..87549849b9 --- /dev/null +++ b/keyboards/mechwild/waka60/info.json @@ -0,0 +1,73 @@ +{ + "keyboard_name": "MechWild Waka60", + "url": "mechwild.com", + "maintainer": "Kyle McCreery", + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "k00", "x": 0, "y": 0}, + {"label": "k01", "x": 1, "y": 0}, + {"label": "k02", "x": 2, "y": 0}, + {"label": "k03", "x": 3, "y": 0}, + {"label": "k04", "x": 4, "y": 0}, + {"label": "k05", "x": 5, "y": 0}, + {"label": "k50", "x": 7, "y": 0}, + {"label": "k51", "x": 8, "y": 0}, + {"label": "k52", "x": 9, "y": 0}, + {"label": "k53", "x": 10, "y": 0}, + {"label": "k54", "x": 11, "y": 0}, + {"label": "k55", "x": 12, "y": 0}, + {"label": "k10", "x": 0, "y": 1}, + {"label": "k11", "x": 1, "y": 1}, + {"label": "k12", "x": 2, "y": 1}, + {"label": "k13", "x": 3, "y": 1}, + {"label": "k14", "x": 4, "y": 1}, + {"label": "k15", "x": 5, "y": 1}, + {"label": "k60", "x": 7, "y": 1}, + {"label": "k61", "x": 8, "y": 1}, + {"label": "k62", "x": 9, "y": 1}, + {"label": "k63", "x": 10, "y": 1}, + {"label": "k64", "x": 11, "y": 1}, + {"label": "k65", "x": 12, "y": 1}, + {"label": "k20", "x": 0, "y": 2}, + {"label": "k21", "x": 1, "y": 2}, + {"label": "k22", "x": 2, "y": 2}, + {"label": "k23", "x": 3, "y": 2}, + {"label": "k24", "x": 4, "y": 2}, + {"label": "k25", "x": 5, "y": 2}, + {"label": "k70", "x": 7, "y": 2}, + {"label": "k71", "x": 8, "y": 2}, + {"label": "k72", "x": 9, "y": 2}, + {"label": "k73", "x": 10, "y": 2}, + {"label": "k74", "x": 11, "y": 2}, + {"label": "k75", "x": 12, "y": 2}, + {"label": "k30", "x": 0, "y": 3}, + {"label": "k31", "x": 1, "y": 3}, + {"label": "k32", "x": 2, "y": 3}, + {"label": "k33", "x": 3, "y": 3}, + {"label": "k34", "x": 4, "y": 3}, + {"label": "k35", "x": 5, "y": 3}, + {"label": "k36", "x": 6, "y": 3}, + {"label": "k80", "x": 7, "y": 3}, + {"label": "k81", "x": 8, "y": 3}, + {"label": "k82", "x": 9, "y": 3}, + {"label": "k83", "x": 10, "y": 3}, + {"label": "k84", "x": 11, "y": 3}, + {"label": "k85", "x": 12, "y": 3}, + {"label": "k40", "x": 0, "y": 4}, + {"label": "k41", "x": 1, "y": 4}, + {"label": "k42", "x": 2, "y": 4}, + {"label": "k43", "x": 3, "y": 4}, + {"label": "k44", "x": 4, "y": 4}, + {"label": "k45", "x": 5, "y": 4}, + {"label": "k46", "x": 6, "y": 4}, + {"label": "k90", "x": 7, "y": 4}, + {"label": "k91", "x": 8, "y": 4}, + {"label": "k92", "x": 9, "y": 4}, + {"label": "k93", "x": 10, "y": 4}, + {"label": "k94", "x": 11, "y": 4}, + {"label": "k95", "x": 12, "y": 4} + ] + } + } +} diff --git a/keyboards/mechwild/waka60/keymaps/audio/config.h b/keyboards/mechwild/waka60/keymaps/audio/config.h new file mode 100644 index 0000000000..095242a161 --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/audio/config.h @@ -0,0 +1,23 @@ +/* +Copyright 2021 Kyle McCreery + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define AUDIO_PIN B5 +#define AUDIO_PWM_DRIVER PWMD1 +#define AUDIO_PWM_CHANNEL 1 +#define AUDIO_STATE_TIMER GPTD4 diff --git a/keyboards/mechwild/waka60/keymaps/audio/keymap.c b/keyboards/mechwild/waka60/keymaps/audio/keymap.c new file mode 100644 index 0000000000..6f36d75496 --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/audio/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + #include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL + ), + [_FN1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + KC_TRNS, AU_TOG, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, MU_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, MU_MOD, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/mechwild/waka60/keymaps/audio/rules.mk b/keyboards/mechwild/waka60/keymaps/audio/rules.mk new file mode 100644 index 0000000000..59d40ea4dd --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/audio/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +AUDIO_ENABLE = yes +AUDIO_DRIVER = pwm_software
\ No newline at end of file diff --git a/keyboards/mechwild/waka60/keymaps/default/keymap.c b/keyboards/mechwild/waka60/keymaps/default/keymap.c new file mode 100644 index 0000000000..54f2a32a7d --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/default/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + #include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL + ), + [_FN1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/mechwild/waka60/keymaps/via/keymap.c b/keyboards/mechwild/waka60/keymaps/via/keymap.c new file mode 100644 index 0000000000..6f36d75496 --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + #include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RALT, KC_RGUI, KC_RCTL + ), + [_FN1] = LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + KC_TRNS, AU_TOG, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, MU_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, MU_MOD, RGB_RMOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FN3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/mechwild/waka60/keymaps/via/rules.mk b/keyboards/mechwild/waka60/keymaps/via/rules.mk new file mode 100644 index 0000000000..16d33cd89f --- /dev/null +++ b/keyboards/mechwild/waka60/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes + diff --git a/keyboards/mechwild/waka60/readme.md b/keyboards/mechwild/waka60/readme.md new file mode 100644 index 0000000000..7e6d9cefca --- /dev/null +++ b/keyboards/mechwild/waka60/readme.md @@ -0,0 +1,19 @@ +# Waka60 + + + +An affordable Ortholinear keyboard kit featuring a speaker, top-facing RGB LEDs, a center encoder, spacing between the halves, and powered by the STM32 Blackpill. + +* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery) +* Hardware Supported: Waka60 v1.1 +* Hardware Availability: [Waka60 on MechWild](https://mechwild.com/product/waka/) + +Make example for this keyboard (after setting up your build environment): + + make mechwild/waka60:default + +Flashing example for this keyboard: + + make mechwild/waka60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechwild/waka60/rules.mk b/keyboards/mechwild/waka60/rules.mk new file mode 100644 index 0000000000..5b058057fc --- /dev/null +++ b/keyboards/mechwild/waka60/rules.mk @@ -0,0 +1,17 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes # Encoder Enabled + +EEPROM_DRIVER = i2c + +DEFAULT_FOLDER = mechwild/waka60/f401 diff --git a/keyboards/mechwild/waka60/waka60.c b/keyboards/mechwild/waka60/waka60.c new file mode 100644 index 0000000000..1b6eec1f44 --- /dev/null +++ b/keyboards/mechwild/waka60/waka60.c @@ -0,0 +1,37 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "waka60.h" +void board_init(void) { + // B9 is configured as I2C1_SDA in the board file; that function must be + // disabled before using B7 as I2C1_SDA. + setPinInputHigh(B9); +} +#ifdef ENCODER_ENABLE +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + switch (index) { + case 0: + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + } + return true; +} +#endif diff --git a/keyboards/mechwild/waka60/waka60.h b/keyboards/mechwild/waka60/waka60.h new file mode 100644 index 0000000000..4e7d82e929 --- /dev/null +++ b/keyboards/mechwild/waka60/waka60.h @@ -0,0 +1,49 @@ +/* Copyright 2021 Kyle McCreery + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k50, k51, k52, k53, k54, k55, \ + k10, k11, k12, k13, k14, k15, k60, k61, k62, k63, k64, k65, \ + k20, k21, k22, k23, k24, k25, k70, k71, k72, k73, k74, k75, \ + k30, k31, k32, k33, k34, k35, k36, k80, k81, k82, k83, k84, k85, \ + k40, k41, k42, k43, k44, k45, k46, k90, k91, k92, k93, k94, k95 \ +) { \ + { k00, k01, k02, k03, k04, k05, ___}, \ + { k10, k11, k12, k13, k14, k15, ___}, \ + { k20, k21, k22, k23, k24, k25, ___}, \ + { k30, k31, k32, k33, k34, k35, k36}, \ + { k40, k41, k42, k43, k44, k45, k46}, \ + { k50, k51, k52, k53, k54, k55, ___}, \ + { k60, k61, k62, k63, k64, k65, ___}, \ + { k70, k71, k72, k73, k74, k75, ___}, \ + { k80, k81, k82, k83, k84, k85, ___}, \ + { k90, k91, k92, k93, k94, k95, ___} \ +} diff --git a/keyboards/mokey/ginkgo65hot/config.h b/keyboards/mokey/ginkgo65hot/config.h new file mode 100644 index 0000000000..5b73c4dc98 --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/config.h @@ -0,0 +1,41 @@ +/* +Copyright 2021 Kyle McCreery +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6653 +#define PRODUCT_ID 0x3366 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Mokey +#define PRODUCT ginkgo65hot + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define MATRIX_ROW_PINS { F7, B7, F5, F1, B0 } +#define MATRIX_COL_PINS { C7, F6, B2, F4, B3, E6, D0, D1, D2, D3, D5, D4, D6, D7, B4 } +#define UNUSED_PINS +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B6 +#define BACKLIGHT_LEVELS 6 +#define BACKLIGHT_CAPS_LOCK +#define BACKLIGHT_BREATHING +#define BREATHING_PERIOD 5 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 diff --git a/keyboards/mokey/ginkgo65hot/ginkgo65hot.c b/keyboards/mokey/ginkgo65hot/ginkgo65hot.c new file mode 100644 index 0000000000..1db0f9c22d --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/ginkgo65hot.c @@ -0,0 +1,16 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "ginkgo65hot.h" + diff --git a/keyboards/mokey/ginkgo65hot/ginkgo65hot.h b/keyboards/mokey/ginkgo65hot/ginkgo65hot.h new file mode 100644 index 0000000000..1a599291b8 --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/ginkgo65hot.h @@ -0,0 +1,47 @@ +/* Copyright 2021 Ocean + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/*LAYOUT + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│ k0D │k0E│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ k1D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│ k2D │k2E│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ k30 │k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │k40 │k41 │k42 │ k44 │k49 │k4A │ │k4C│k4D│k4E│ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ +*/ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k44, k49, k4A, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E }, \ +} diff --git a/keyboards/mokey/ginkgo65hot/info.json b/keyboards/mokey/ginkgo65hot/info.json new file mode 100644 index 0000000000..d4e32f436d --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "ginkgo65hot", + "url": "", + "maintainer": "mokey", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0d", "x":13, "y":0, "w":2}, + {"label":"k0e", "x":15, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k11", "x":1.5, "y":1}, + {"label":"k12", "x":2.5, "y":1}, + {"label":"k13", "x":3.5, "y":1}, + {"label":"k14", "x":4.5, "y":1}, + {"label":"k15", "x":5.5, "y":1}, + {"label":"k16", "x":6.5, "y":1}, + {"label":"k17", "x":7.5, "y":1}, + {"label":"k18", "x":8.5, "y":1}, + {"label":"k19", "x":9.5, "y":1}, + {"label":"k1a", "x":10.5, "y":1}, + {"label":"k1b", "x":11.5, "y":1}, + {"label":"k1c", "x":12.5, "y":1}, + {"label":"k1d", "x":13.5, "y":1, "w":1.5}, + {"label":"k1e", "x":15, "y":1,}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k21", "x":1.75, "y":2}, + {"label":"k22", "x":2.75, "y":2}, + {"label":"k23", "x":3.75, "y":2}, + {"label":"k24", "x":4.75, "y":2}, + {"label":"k25", "x":5.75, "y":2}, + {"label":"k26", "x":6.75, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k2d", "x":12.75, "y":2, "w":2.25}, + {"label":"k2e", "x":15, "y":2}, + + {"label":"k30", "x":0, "y":3, "w":2.25}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3c", "x":12.25, "y":3, "w":1.75}, + {"label":"k3d", "x":14, "y":3}, + {"label":"k3e", "x":15, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.25}, + {"label":"k41", "x":1.25, "y":4, "w":1.25}, + {"label":"k42", "x":2.5, "y":4, "w":1.25}, + {"label":"k44", "x":3.75, "y":4, "w":6.25}, + {"label":"k49", "x":10, "y":4, "w":1.25}, + {"label":"k4a", "x":11.25, "y":4, "w":1.25}, + {"label":"k4c", "x":13, "y":4}, + {"label":"k4d", "x":14, "y":4}, + {"label":"k4e", "x":15, "y":4} + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/mokey/ginkgo65hot/keymaps/default/keymap.c b/keyboards/mokey/ginkgo65hot/keymaps/default/keymap.c new file mode 100644 index 0000000000..df49aef256 --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │Del│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │PgU│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │LCtl│LGui│LAlt│ Space │RAlt│ Fn │ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + + LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/mokey/ginkgo65hot/keymaps/via/keymap.c b/keyboards/mokey/ginkgo65hot/keymaps/via/keymap.c new file mode 100644 index 0000000000..a8d5162e7e --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/mokey/ginkgo65hot/keymaps/via/rules.mk b/keyboards/mokey/ginkgo65hot/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/mokey/ginkgo65hot/readme.md b/keyboards/mokey/ginkgo65hot/readme.md new file mode 100644 index 0000000000..b3aa7ab562 --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/readme.md @@ -0,0 +1,20 @@ +# Ginkgo65hot Multi PCB + + + +Support Atmega32u4 keyboard,With a variety of configurations + +* Keyboard Maintainer: [mokey](https://github.com/rhmokey) +* Hardware Supported: Atmega32u4 +## Bootloader +* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware + +Make example for this keyboard (after setting up your build environment): + + make mokey/ginkgo65hot:default + +Flashing example for this keyboard: + + make mokey/ginkgo65hot:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/mokey/ginkgo65hot/rules.mk b/keyboards/mokey/ginkgo65hot/rules.mk new file mode 100644 index 0000000000..02fbe72525 --- /dev/null +++ b/keyboards/mokey/ginkgo65hot/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ramonimbao/chevron/keymaps/via/keymap.c b/keyboards/ramonimbao/chevron/keymaps/via/keymap.c index d34b06a999..190a39e257 100644 --- a/keyboards/ramonimbao/chevron/keymaps/via/keymap.c +++ b/keyboards/ramonimbao/chevron/keymaps/via/keymap.c @@ -75,10 +75,12 @@ bool encoder_update_user(uint8_t index, bool clockwise) { encoder_cw.pressed = true; encoder_cw.time = (timer_read() | 1); action_exec(encoder_cw); + wait_ms(20); } else { encoder_ccw.pressed = true; encoder_ccw.time = (timer_read() | 1); action_exec(encoder_ccw); + wait_ms(20); } return true; } diff --git a/keyboards/spacey/config.h b/keyboards/spacey/config.h index 58249d4f19..81f3df6a89 100644 --- a/keyboards/spacey/config.h +++ b/keyboards/spacey/config.h @@ -20,8 +20,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x0000 +#define VENDOR_ID 0x5641 // "VA" +#define PRODUCT_ID 0x2045 // "Space E" #define DEVICE_VER 0x0001 #define MANUFACTURER vanilla #define PRODUCT spacey diff --git a/keyboards/spacey/keymaps/via/keymap.c b/keyboards/spacey/keymaps/via/keymap.c new file mode 100644 index 0000000000..660f427da7 --- /dev/null +++ b/keyboards/spacey/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2021 vanilla + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CLCK,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_UP, + KC_LSFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT, KC_LEFT, KC_DOWN, + KC_LCTL, KC_LGUI, MO(1), KC_MUTE, KC_LALT, KC_SPC, KC_NO, KC_BSPC, KC_DEL, KC_NO, KC_RALT, KC_RGUI, KC_RCTL, KC_RGHT + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, + KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_ENT, KC_MS_U, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_COMM,KC_DOT,KC_SLSH,KC_RSFT, KC_MS_L, KC_MS_D, + KC_LCTL, KC_LGUI, KC_NO, KC_ESC, KC_LALT, KC_SPC, KC_NO, KC_BSPC, KC_RALT, KC_NO, KC_APP, KC_RGUI, KC_RCTL, KC_MS_R + ), + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/spacey/keymaps/via/rules.mk b/keyboards/spacey/keymaps/via/rules.mk new file mode 100644 index 0000000000..43061db1dd --- /dev/null +++ b/keyboards/spacey/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/takashicompany/radialex/config.h b/keyboards/takashicompany/radialex/config.h new file mode 100644 index 0000000000..ee6e958f9c --- /dev/null +++ b/keyboards/takashicompany/radialex/config.h @@ -0,0 +1,139 @@ +/* +Copyright 2021 takashicompany + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7463 // tc = takashicompany +#define PRODUCT_ID 0x0019 +#define DEVICE_VER 0x0001 +#define MANUFACTURER takashicompany +#define PRODUCT Radialex + +/* key matrix size */ +#define MATRIX_ROWS 7 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B6, D4, C6, D7, E6, B4, B5 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 12 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/radialex/info.json b/keyboards/takashicompany/radialex/info.json new file mode 100644 index 0000000000..d78e301ee9 --- /dev/null +++ b/keyboards/takashicompany/radialex/info.json @@ -0,0 +1,191 @@ +{ + "keyboard_name": "Radialex", + "url": "https://github.com/takashicompany/radialex", + "maintainer": "takashicompany", + "layouts": { + "LAYOUT": { + "layout": [ + { + "x": 1, + "y": 0 + }, + { + "x": 2, + "y": 0 + }, + { + "x": 3, + "y": 0 + }, + { + "x": 4, + "y": 0 + }, + { + "x": 5, + "y": 0 + }, + { + "x": 9, + "y": 0 + }, + { + "x": 10, + "y": 0 + }, + { + "x": 11, + "y": 0 + }, + { + "x": 12, + "y": 0 + }, + { + "x": 13, + "y": 0 + }, + { + "x": 0, + "y": 1 + }, + { + "x": 1, + "y": 1 + }, + { + "x": 2, + "y": 1 + }, + { + "x": 3, + "y": 1 + }, + { + "x": 4, + "y": 1 + }, + { + "x": 5, + "y": 1 + }, + { + "x": 7, + "y": 1 + }, + { + "x": 9, + "y": 1 + }, + { + "x": 10, + "y": 1 + }, + { + "x": 11, + "y": 1 + }, + { + "x": 12, + "y": 1 + }, + { + "x": 13, + "y": 1 + }, + { + "x": 14, + "y": 1 + }, + { + "x": 0, + "y": 2 + }, + { + "x": 1, + "y": 2 + }, + { + "x": 2, + "y": 2 + }, + { + "x": 3, + "y": 2 + }, + { + "x": 4, + "y": 2 + }, + { + "x": 5, + "y": 2 + }, + { + "x": 9, + "y": 2 + }, + { + "x": 10, + "y": 2 + }, + { + "x": 11, + "y": 2 + }, + { + "x": 12, + "y": 2 + }, + { + "x": 13, + "y": 2 + }, + { + "x": 14, + "y": 2 + }, + { + "x": 2, + "y": 3 + }, + { + "x": 3, + "y": 3 + }, + { + "x": 4, + "y": 3 + }, + { + "x": 5, + "y": 3 + }, + { + "x": 6, + "y": 3 + }, + { + "x": 8, + "y": 3 + }, + { + "x": 9, + "y": 3 + }, + { + "x": 10, + "y": 3 + }, + { + "x": 11, + "y": 3 + }, + { + "x": 12, + "y": 3 + } + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/takashicompany/radialex/keymaps/default/keymap.c b/keyboards/takashicompany/radialex/keymaps/default/keymap.c new file mode 100644 index 0000000000..ad8274e432 --- /dev/null +++ b/keyboards/takashicompany/radialex/keymaps/default/keymap.c @@ -0,0 +1,64 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + RADIALEX = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_ESC, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, RADIALEX, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, KC_DEL, + KC_LSFT, SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, ALT_T(KC_LANG2), SFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1), KC_RALT, KC_RGUI, KC_RCTL + ), + LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_LCTL, CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_TRNS, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, KC_TRNS, + KC_TRNS, SFT_T(LSFT(KC_LBRC)), LSFT(KC_LBRC), LSFT(KC_SLSH), LSFT(KC_MINS), LSFT(KC_RO), LSFT(KC_SCLN), LSFT(KC_QUOT), LSFT(KC_RBRC), LSFT(KC_NUHS), LSFT(KC_JYEN), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, + KC_TRNS, KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_TRNS, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_TRNS, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case RADIALEX: + if (record->event.pressed) { + SEND_STRING("Radialex"); + rgblight_toggle(); + } + return false; + } + return true; +} diff --git a/keyboards/takashicompany/radialex/keymaps/via/config.h b/keyboards/takashicompany/radialex/keymaps/via/config.h new file mode 100644 index 0000000000..74f9e9e64f --- /dev/null +++ b/keyboards/takashicompany/radialex/keymaps/via/config.h @@ -0,0 +1,20 @@ +/* +Copyright 2021 takashicompany + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 8 diff --git a/keyboards/takashicompany/radialex/keymaps/via/keymap.c b/keyboards/takashicompany/radialex/keymaps/via/keymap.c new file mode 100644 index 0000000000..ce9c9d78ea --- /dev/null +++ b/keyboards/takashicompany/radialex/keymaps/via/keymap.c @@ -0,0 +1,89 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#define RADIALEX USER00 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_ESC, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, RADIALEX, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, KC_DEL, + KC_LSFT, SFT_T(KC_Z), GUI_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, CTL_T(KC_DOT), KC_BSPC, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, ALT_T(KC_LANG2), SFT_T(KC_TAB), KC_SPC, LT(1, KC_LANG1), KC_RALT, KC_RGUI, KC_RCTL + ), + LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_LCTL, CTL_T(KC_EQL), KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_TRNS, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, KC_TRNS, + KC_TRNS, SFT_T(LSFT(KC_LBRC)), LSFT(KC_LBRC), LSFT(KC_SLSH), LSFT(KC_MINS), LSFT(KC_RO), LSFT(KC_SCLN), LSFT(KC_QUOT), LSFT(KC_RBRC), LSFT(KC_NUHS), LSFT(KC_JYEN), KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, + KC_TRNS, KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_TRNS, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_TRNS, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case RADIALEX: + if (record->event.pressed) { + SEND_STRING("Radialex"); + rgblight_toggle(); + } + return false; + } + return true; +} diff --git a/keyboards/takashicompany/radialex/keymaps/via/rules.mk b/keyboards/takashicompany/radialex/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/takashicompany/radialex/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/takashicompany/radialex/radialex.c b/keyboards/takashicompany/radialex/radialex.c new file mode 100644 index 0000000000..9146106973 --- /dev/null +++ b/keyboards/takashicompany/radialex/radialex.c @@ -0,0 +1,17 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "radialex.h" diff --git a/keyboards/takashicompany/radialex/radialex.h b/keyboards/takashicompany/radialex/radialex.h new file mode 100644 index 0000000000..8ad5712201 --- /dev/null +++ b/keyboards/takashicompany/radialex/radialex.h @@ -0,0 +1,42 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, \ + k41, k11, k12, k13, k14, k15, k45, k16, k17, k18, k19, k20, k43, \ + k42, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k44, \ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k40 \ +) { \ + { k01, k02, k03, k04, k05, k06, k07 }, \ + { k08, k09, k10, k11, k12, k13, k14 }, \ + { k15, k16, k17, k18, k19, k20, k21 }, \ + { k22, k23, k24, k25, k26, k27, k28 }, \ + { k29, k30, k31, k32, k33, k34, k35 }, \ + { k36, k37, k38, k39, k40, k41, k42 }, \ + { k43, k44, k45, KC_NO, KC_NO, KC_NO, KC_NO } \ +} diff --git a/keyboards/takashicompany/radialex/readme.md b/keyboards/takashicompany/radialex/readme.md new file mode 100644 index 0000000000..1468e7b0b1 --- /dev/null +++ b/keyboards/takashicompany/radialex/readme.md @@ -0,0 +1,31 @@ +# Radialex + + + +40% larger keyboard. +The radial key layout allows you to place your hand in a natural position and move your fingers the shortest distance to type. +Your iconic keys and keycaps can be placed in the center of the keyboard. +It is possible to make it shine with LED backlighting. +The keyswitches can also be replaced with MX sockets. + +* Keyboard Maintainer: [takashicompany](https://github.com/yourusername) +* Hardware Supported: PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/radialex + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/radialex:default + +Flashing example for this keyboard: + + make takashicompany/radialex:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/takashicompany/radialex/rules.mk b/keyboards/takashicompany/radialex/rules.mk new file mode 100644 index 0000000000..d990e8cae3 --- /dev/null +++ b/keyboards/takashicompany/radialex/rules.mk @@ -0,0 +1,18 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/xelus/pachi/rgb/rev1/config.h b/keyboards/xelus/pachi/rgb/rev1/config.h index 66aab54276..75b477e069 100644 --- a/keyboards/xelus/pachi/rgb/rev1/config.h +++ b/keyboards/xelus/pachi/rgb/rev1/config.h @@ -21,7 +21,7 @@ #define PRODUCT_ID 0x5052 // "PR" #define DEVICE_VER 0x0001 #define MANUFACTURER Xelus -#define PRODUCT Xelus Pachi RGB +#define PRODUCT Xelus Pachi RGB Rev 1 /* key matrix size */ #define MATRIX_ROWS 6 diff --git a/keyboards/xelus/pachi/rgb/rev2/config.h b/keyboards/xelus/pachi/rgb/rev2/config.h index 46f22acb58..6a5a583ce8 100644 --- a/keyboards/xelus/pachi/rgb/rev2/config.h +++ b/keyboards/xelus/pachi/rgb/rev2/config.h @@ -18,10 +18,10 @@ /* USB Device descriptor parameter */ #define VENDOR_ID 0x5845 // "XE" -#define PRODUCT_ID 0x5052 // "PR" +#define PRODUCT_ID 0x5053 // "PR" + 1 #define DEVICE_VER 0x0002 #define MANUFACTURER Xelus -#define PRODUCT Xelus Pachi RGB +#define PRODUCT Xelus Pachi RGB Rev 2 /* key matrix size */ #define MATRIX_ROWS 12 |