summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--keyboards/satan/keymaps/iso_split_rshift/Makefile70
-rwxr-xr-xkeyboards/satan/keymaps/iso_split_rshift/build.sh17
-rw-r--r--keyboards/satan/keymaps/iso_split_rshift/config.h31
-rw-r--r--keyboards/satan/keymaps/iso_split_rshift/keymap.c192
-rwxr-xr-xkeyboards/satan/keymaps/iso_split_rshift/resetboard.sh4
-rw-r--r--keyboards/satan/keymaps/iso_split_rshift/satan.c30
-rw-r--r--keyboards/satan/keymaps/iso_split_rshift/satan.h96
7 files changed, 440 insertions, 0 deletions
diff --git a/keyboards/satan/keymaps/iso_split_rshift/Makefile b/keyboards/satan/keymaps/iso_split_rshift/Makefile
new file mode 100644
index 0000000000..67eaa078f7
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/Makefile
@@ -0,0 +1,70 @@
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes # Console for debug(+400)
+COMMAND_ENABLE ?= yes # Commands for debug and configuration
+NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no # MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE ?= no # Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+ifndef QUANTUM_DIR
+ include ../../../../Makefile
+endif
diff --git a/keyboards/satan/keymaps/iso_split_rshift/build.sh b/keyboards/satan/keymaps/iso_split_rshift/build.sh
new file mode 100755
index 0000000000..2bfc3bb32d
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/build.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+# adjust for cpu
+# -j 16 gave best result on a hyperthreaded quad core core i7
+THREADS="-j 16"
+echo "We need sudo later"
+sudo ls 2>&1 /dev/null
+make clean
+make KEYMAP=toni77 ${THREADS}
+if [[ $? -eq 0 ]]
+then
+ echo "please trigger flashing! you have 5 seconds"
+ sleep 5
+ sudo make KEYMAP=toni77 dfu ${THREADS}
+else
+ echo "make failed"
+ exit 77
+fi
diff --git a/keyboards/satan/keymaps/iso_split_rshift/config.h b/keyboards/satan/keymaps/iso_split_rshift/config.h
new file mode 100644
index 0000000000..39eec4b597
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/config.h
@@ -0,0 +1,31 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+
+#define RGB_DI_PIN B2
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 8 // Number of LEDs
+#define RGBLIGHT_HUE_STEP 10
+#define RGBLIGHT_SAT_STEP 17
+#define RGBLIGHT_VAL_STEP 17
+
+#endif
diff --git a/keyboards/satan/keymaps/iso_split_rshift/keymap.c b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
new file mode 100644
index 0000000000..fc07f6da8d
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/keymap.c
@@ -0,0 +1,192 @@
+// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
+// this is the style you want to emulate.
+
+#include "satan.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _DEF 0
+#define _SPC 1
+#define _TAB 2
+#define _SFX 3
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ /* Keymap _DEF: Default Layer
+ * ,-----------------------------------------------------------.-------------------------------------
+ * |Grv| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |
+ * |-----------------------------------------------------------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | Tab is Fn1 !!
+ * |-----------------------------------------------------------|
+ * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| Return |
+ * |-----------------------------------------------------------|
+ * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn2| RShift is UP
+ * |-----------------------------------------------------------|
+ * |Ctrl|Win |Alt | Space/Fn0 |Alt |Win |Menu|RCtl| Gui Menu, RCtrl is
+ * `-----------------------------------------------------------' LEFT DWN RIGHT
+ */
+[_DEF] = KEYMAP_ISO_SPLITRSHIFT(
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
+ F(2), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
+ F(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, F(17), \
+ KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, TG(_SFX),F(4), \
+ KC_LCTL, KC_LGUI, KC_LALT, LT(_SPC,KC_SPACE), KC_RALT, F(5), F(6), F(7)) ,
+ /* Keymap 1: F-and-vim Layer, modified with Space (Fn0)
+ * ,-----------------------------------------------------------.-----------------------------------------
+ * |PrSc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete|
+ * |-----------------------------------------------------------|
+ * | |Paus| Up| | | | | | | | | | | |
+ * |-----------------------------------------------------------|
+ * | |Lft|Dwn|Rgt| | | |Left|Down|Right|Up| | PLAY |
+ * |-----------------------------------------------------------|
+ * | | | | | | |M0 | | | | | Vol+ | |
+ * |-----------------------------------------------------------|
+ * | | | | |Alt |Prev|Vol-|Next|
+ * `-----------------------------------------------------------'
+ */
+[_SPC] = KEYMAP_ISO_SPLITRSHIFT(
+ KC_PSCR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
+ KC_TRNS, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT,KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SPACE,M(0), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT) ,
+
+ /* Keymap 2: Tab Layer w/ vim pageup, modified with Tab (Fn1)
+ * ,-----------------------------------------------------------.-----------------------------------------
+ * |WAKE| | | | | | | | | | | | |Insert| TAB+GRC = WAKE
+ * |-----------------------------------------------------------|
+ * | | | | | | | | | | | | | | |
+ * |-----------------------------------------------------------|
+ * | | | | | | | |Pos1|PgDn|PgUp|End| |Retrn |
+ * |-----------------------------------------------------------|
+ * | | | | | | |AF2| | | | | PgUp | |
+ * |-----------------------------------------------------------|
+ * | | | | |Alt |Pos1|PgDn|End |
+ * `-----------------------------------------------------------'
+ */
+[_TAB] = KEYMAP_ISO_SPLITRSHIFT(
+ KC_WAKE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END) ,
+
+ /* Keymap 3: Split right shift Numpad toggle Layer (Fn2)
+ * ,-----------------------------------------------------------.-----------------------------------------
+ * |RSET| | | | | | | 7| 8| 9| | | |Backsp |
+ * |-----------------------------------------------------------|
+ * | | | | | | | | 4 | 5 | 6 | | | | \ |
+ * |-----------------------------------------------------------|
+ * | | L | L | | | | | 1 | 2 | 3 | | | Return |
+ * |-----------------------------------------------------------|
+ * | | L | L | L | L | L | L | | 0 | | /| Up | | All "L"s represent
+ * |-----------------------------------------------------------| LED controlling
+ * |Ctrl|Win |Alt | |Alt |Left|Down|Right|
+ * `-----------------------------------------------------------'
+ */
+[_SFX] = KEYMAP_ISO_SPLITRSHIFT(
+ RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_4, KC_5, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, \
+ KC_TRNS, F(9), F(10), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_TRNS, KC_TRNS, KC_NO, KC_ENT, \
+ KC_TRNS, F(11), F(12), F(13), F(14), F(15), F(16), KC_TRNS, KC_TRNS, KC_0, KC_TRNS, KC_SLSH, KC_TRNS, KC_UP, \
+ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT) ,
+
+};
+
+enum function_id {
+ LAUNCH,
+ RGBLED_TOGGLE,
+ RGBLED_STEP_MODE,
+ RGBLED_INCREASE_HUE,
+ RGBLED_DECREASE_HUE,
+ RGBLED_INCREASE_SAT,
+ RGBLED_DECREASE_SAT,
+ RGBLED_INCREASE_VAL,
+ RGBLED_DECREASE_VAL,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+ [0] = ACTION_LAYER_TAP_KEY(_SPC, KC_SPACE),
+ [1] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC),
+ [2] = ACTION_LAYER_TAP_KEY(_TAB, KC_TAB),
+ [3] = ACTION_LAYER_TOGGLE(_SFX),
+ [4] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_UP),
+ [5] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_LEFT),
+ [6] = ACTION_MODS_TAP_KEY(MOD_RGUI, KC_DOWN),
+ [7] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_RIGHT),
+ [8] = ACTION_FUNCTION(LAUNCH),
+ [9] = ACTION_FUNCTION(RGBLED_TOGGLE),
+ [10] = ACTION_FUNCTION(RGBLED_STEP_MODE),
+ [11] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
+ [12] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
+ [13] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
+ [14] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
+ [15] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
+ [16] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
+ [17] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ENT),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
+{
+ // MACRODOWN only works in this function
+ switch(id) {
+ case 0:
+ return (record->event.pressed ?
+ MACRO( D(RALT), T(SPC), U(RALT), END )
+ :MACRO( END ));
+ break;
+ case 1:
+ return (record->event.pressed ?
+ MACRO( D(LALT), T(F2), U(LALT), END )
+ :MACRO( END ));
+ break;
+ }
+ return MACRO_NONE;
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+ switch (id) {
+ case RGBLED_TOGGLE:
+ //led operations
+ if (record->event.pressed) {
+ rgblight_toggle();
+ }
+ break;
+ case RGBLED_INCREASE_HUE:
+ if (record->event.pressed) {
+ rgblight_increase_hue();
+ }
+ break;
+ case RGBLED_DECREASE_HUE:
+ if (record->event.pressed) {
+ rgblight_decrease_hue();
+ }
+ break;
+ case RGBLED_INCREASE_SAT:
+ if (record->event.pressed) {
+ rgblight_increase_sat();
+ }
+ break;
+ case RGBLED_DECREASE_SAT:
+ if (record->event.pressed) {
+ rgblight_decrease_sat();
+ }
+ break;
+ case RGBLED_INCREASE_VAL:
+ if (record->event.pressed) {
+ rgblight_increase_val();
+ }
+ break;
+ case RGBLED_DECREASE_VAL:
+ if (record->event.pressed) {
+ rgblight_decrease_val();
+ }
+ break;
+ case RGBLED_STEP_MODE:
+ if (record->event.pressed) {
+ rgblight_step();
+ }
+ break;
+ }
+}
diff --git a/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh
new file mode 100755
index 0000000000..d955ccf545
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/resetboard.sh
@@ -0,0 +1,4 @@
+#!/bin/bash
+sudo dfu-programmer atmega32u4 erase --force
+sudo dfu-programmer atmega32u4 flash clear_flash.hex
+sudo dfu-programmer atmega32u4 reset
diff --git a/keyboards/satan/keymaps/iso_split_rshift/satan.c b/keyboards/satan/keymaps/iso_split_rshift/satan.c
new file mode 100644
index 0000000000..d2c5d5c205
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/satan.c
@@ -0,0 +1,30 @@
+#include "satan.h"
+#include "led.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+};
+
+void led_init_ports(void) {
+ // * Set our LED pins as output
+ DDRB |= (1<<2);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+ // Turn capslock on
+ PORTB &= ~(1<<2);
+ } else {
+ // Turn capslock off
+ PORTB |= (1<<2);
+ }
+}
diff --git a/keyboards/satan/keymaps/iso_split_rshift/satan.h b/keyboards/satan/keymaps/iso_split_rshift/satan.h
new file mode 100644
index 0000000000..2ca820c63e
--- /dev/null
+++ b/keyboards/satan/keymaps/iso_split_rshift/satan.h
@@ -0,0 +1,96 @@
+#ifndef SATAN_H
+#define SATAN_H
+
+#include "../../../../quantum/quantum.h"
+
+/* Clueboard matrix layout
+ * ,-----------------------------------------------------------.
+ * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
+ * |-----------------------------------------------------------|
+ * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
+ * |-----------------------------------------------------------|
+ * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
+ * |-----------------------------------------------------------|
+ * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d |
+ * |-----------------------------------------------------------|
+ * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
+ * `-----------------------------------------------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define KEYMAP( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, \
+ k40, k41, k42, k45, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \
+ {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d}, \
+ {k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d} \
+}
+
+/* Satan HHKB matrix layout
+ * ,------------------------------------------------------------.
+ * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d| 49 |
+ * |------------------------------------------------------------|
+ * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
+ * |------------------------------------------------------------|
+ * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d |
+ * |------------------------------------------------------------|
+ * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3d | 3c |
+ * |------------------------------------------------------------|
+ * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
+ * `------------------------------------------------------------'
+ */
+
+#define KEYMAP_HHKB( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k49, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \
+ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3c, \
+ k40, k41, k42, k45, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, KC_NO, k2d}, \
+ {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+ {k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, k49, k4a, k4b, k4c, k4d} \
+}
+
+/* ISO w/ split right shift key matrix layout
+ * ,-----------------------------------------------------------.
+ * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d |
+ * |-----------------------------------------------------------|
+ * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d |
+ * |-----------------------------------------------------------|
+ * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2c|2d |
+ * |-----------------------------------------------------------|
+ * | 30 | 31| 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c| 3d |
+ * |-----------------------------------------------------------|
+ * | 40 | 41 | 42 | 45 | 4a | 4b | 4c | 4d |
+ * `-----------------------------------------------------------'
+ */
+#define KEYMAP_ISO_SPLITRSHIFT( \
+ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, \
+ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, \
+ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \
+ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \
+ k40, k41, k42, k45, k4a, k4b, k4c, k4d \
+) \
+{ \
+ {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \
+ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \
+ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \
+ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \
+ {k40, k41, k42, KC_NO, KC_NO, k45, KC_NO, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d} \
+}
+
+void matrix_init_user(void);
+void matrix_scan_user(void);
+
+#endif