diff options
35 files changed, 82 insertions, 627 deletions
diff --git a/keyboards/1upkeyboards/1up60hte/1up60hte.c b/keyboards/1upkeyboards/1up60hte/1up60hte.c index 3af0e9d400..460e42a0e5 100644 --- a/keyboards/1upkeyboards/1up60hte/1up60hte.c +++ b/keyboards/1upkeyboards/1up60hte/1up60hte.c @@ -16,19 +16,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "1up60hte.h" - -void keyboard_pre_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - setPinOutput(B6); - keyboard_pre_init_user(); -} - -void led_set_kb(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B6); - } else { - writePinHigh(B6); - } - led_set_user(usb_led); -}
\ No newline at end of file diff --git a/keyboards/1upkeyboards/1up60hte/config.h b/keyboards/1upkeyboards/1up60hte/config.h index 8c4d2fc308..c3ba030de9 100644 --- a/keyboards/1upkeyboards/1up60hte/config.h +++ b/keyboards/1upkeyboards/1up60hte/config.h @@ -40,6 +40,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define LED_CAPS_LOCK_PIN B6 +#define LED_PIN_ON_STATE 0 + /* number of backlight levels */ #define BACKLIGHT_PIN B7 #ifdef BACKLIGHT_PIN diff --git a/keyboards/alf/dc60/config.h b/keyboards/alf/dc60/config.h index b4cff82d41..098891eee0 100644 --- a/keyboards/alf/dc60/config.h +++ b/keyboards/alf/dc60/config.h @@ -48,6 +48,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW +#define LED_CAPS_LOCK_PIN B7 +#define LED_PIN_ON_STATE 0 + #define BACKLIGHT_PIN B6 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 5 diff --git a/keyboards/alf/dc60/dc60.c b/keyboards/alf/dc60/dc60.c index 70979adf4e..4096d10a64 100644 --- a/keyboards/alf/dc60/dc60.c +++ b/keyboards/alf/dc60/dc60.c @@ -14,36 +14,3 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "dc60.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 7); - PORTB &= ~(1 << 7); - } else { - DDRB &= ~(1 << 7); - PORTB &= ~(1 << 7); - } - - led_set_user(usb_led); -} diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h index fcf4e85a9f..cd98935090 100644 --- a/keyboards/alf/x11/config.h +++ b/keyboards/alf/x11/config.h @@ -48,10 +48,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 +#define LED_NUM_LOCK_PIN E6 +#define LED_CAPS_LOCK_PIN C6 +#define LED_SCROLL_LOCK_PIN C7 +#define LED_PIN_ON_STATE 0 #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING diff --git a/keyboards/alf/x11/x11.c b/keyboards/alf/x11/x11.c index 9699918d5b..28e77ecd3f 100644 --- a/keyboards/alf/x11/x11.c +++ b/keyboards/alf/x11/x11.c @@ -14,51 +14,3 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "x11.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - setPinOutput(C6); - setPinOutput(E6); - setPinOutput(C7); - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(C6); - } else { - writePinHigh(C6); - } - - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - writePinLow(E6); - } else { - writePinHigh(E6); - } - - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinLow(C7); - } else { - writePinHigh(C7); - } - - led_set_user(usb_led); -} diff --git a/keyboards/amj60/amj60.c b/keyboards/amj60/amj60.c index 993a5917db..02aa116d54 100644 --- a/keyboards/amj60/amj60.c +++ b/keyboards/amj60/amj60.c @@ -1,30 +1 @@ #include "amj60.h" -#include "led.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); -}; - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - matrix_scan_user(); -}; - -void led_init_ports(void) { - // * Set our LED pins as output - DDRB |= (1<<2); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // Turn capslock on - PORTB &= ~(1<<2); - } else { - // Turn capslock off - PORTB |= (1<<2); - } -} diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h index 81b70111b1..79cfbe59e4 100644 --- a/keyboards/amj60/config.h +++ b/keyboards/amj60/config.h @@ -38,11 +38,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { F1, F0, E6, C7, C6, B0, D4, B1, B7, B5, B4, D7, D6, B3} #define UNUSED_PINS -#define BACKLIGHT_PIN B6 - /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define LED_CAPS_LOCK_PIN B2 +#define LED_PIN_ON_STATE 0 + +#define BACKLIGHT_PIN B6 + + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/cutie_club/wraith/config.h b/keyboards/cutie_club/wraith/config.h index a5d3f0ebc6..e1d2d51d6e 100644 --- a/keyboards/cutie_club/wraith/config.h +++ b/keyboards/cutie_club/wraith/config.h @@ -48,10 +48,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -/* - * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. - */ -#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 +#define LED_CAPS_LOCK_PIN B3 +#define LED_PIN_ON_STATE 0 // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING diff --git a/keyboards/cutie_club/wraith/wraith.c b/keyboards/cutie_club/wraith/wraith.c index 95265384ee..cb2d1911c7 100644 --- a/keyboards/cutie_club/wraith/wraith.c +++ b/keyboards/cutie_club/wraith/wraith.c @@ -15,29 +15,8 @@ */ #include "wraith.h" -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - void matrix_init_kb(void) { - setPinOutput(B3); - setPinOutput(B0); - matrix_init_user(); -} - -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - return process_record_user(keycode, record); -} + setPinOutput(B0); -void led_set_kb(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B3); - } else { - writePinHigh(B3); - } - led_set_user(usb_led); + matrix_init_user(); } diff --git a/keyboards/dz60/config.h b/keyboards/dz60/config.h index 3699ef7552..24fd63836d 100644 --- a/keyboards/dz60/config.h +++ b/keyboards/dz60/config.h @@ -30,6 +30,9 @@ /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW +#define LED_CAPS_LOCK_PIN B2 +#define LED_PIN_ON_STATE 0 + #define BACKLIGHT_PIN B6 #define BACKLIGHT_LEVELS 5 diff --git a/keyboards/dz60/dz60.c b/keyboards/dz60/dz60.c index 936d027a31..23db2e4d75 100644 --- a/keyboards/dz60/dz60.c +++ b/keyboards/dz60/dz60.c @@ -1,21 +1 @@ #include "dz60.h" - -void matrix_init_kb(void) { - matrix_init_user(); - led_init_ports(); -}; - -void led_init_ports(void) { - setPinOutput(B2); - writePinHigh(B2); -} - -void led_set_kb(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - writePinLow(B2); - } else { - writePinHigh(B2); - } - - led_set_user(usb_led); -} diff --git a/keyboards/jd40/jd40.c b/keyboards/jd40/jd40.c index fa06356d97..1b68ddd4f3 100644 --- a/keyboards/jd40/jd40.c +++ b/keyboards/jd40/jd40.c @@ -1,26 +1 @@ #include "jd40.h" - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - - // if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // gh60_caps_led_on(); - // } else { - // gh60_caps_led_off(); - // } - - // if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // gh60_esc_led_on(); - // } else { - // gh60_esc_led_off(); - // } - - // if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { - // gh60_fn_led_on(); - // } else { - // gh60_fn_led_off(); - // } - - led_set_user(usb_led); -} diff --git a/keyboards/mechkeys/mk60/config.h b/keyboards/mechkeys/mk60/config.h index 9fccd8a8b0..b408625f25 100644 --- a/keyboards/mechkeys/mk60/config.h +++ b/keyboards/mechkeys/mk60/config.h @@ -53,6 +53,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 +#define LED_CAPS_LOCK_PIN B7 +#define LED_PIN_ON_STATE 0 + #define BACKLIGHT_PIN B6 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 6 diff --git a/keyboards/mechkeys/mk60/mk60.c b/keyboards/mechkeys/mk60/mk60.c index 4c6a059f4c..7ec8bff22b 100644 --- a/keyboards/mechkeys/mk60/mk60.c +++ b/keyboards/mechkeys/mk60/mk60.c @@ -14,37 +14,3 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "mk60.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - setPinOutput(B7); - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)){ - writePinLow(B7); - }else { - writePinHigh(B7); - } - - led_set_user(usb_led); -} diff --git a/keyboards/moon/config.h b/keyboards/moon/config.h index a02cfdba16..12a949a076 100644 --- a/keyboards/moon/config.h +++ b/keyboards/moon/config.h @@ -31,6 +31,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 8 #define MATRIX_COLS 11 +#define LED_CAPS_LOCK_PIN B5 +#define LED_SCROLL_LOCK_PIN B6 + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/moon/moon.c b/keyboards/moon/moon.c index c218bf5ef1..95ce007e2b 100644 --- a/keyboards/moon/moon.c +++ b/keyboards/moon/moon.c @@ -14,56 +14,3 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "moon.h" - -#define CAPS_PIN B5 -#define SCROLL_PIN B6 - -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - setPinOutput(CAPS_PIN); - setPinOutput(SCROLL_PIN); - - matrix_init_user(); -} - -/* - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -*/ - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinHigh(CAPS_PIN); - } else { - writePinLow(CAPS_PIN); - } - - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinHigh(SCROLL_PIN); - } else { - writePinLow(SCROLL_PIN); - } - - led_set_user(usb_led); -} diff --git a/keyboards/mt980/config.h b/keyboards/mt980/config.h index 6b8b952952..56927be705 100644 --- a/keyboards/mt980/config.h +++ b/keyboards/mt980/config.h @@ -22,6 +22,11 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL +#define LED_NUM_LOCK_PIN C6 +#define LED_CAPS_LOCK_PIN C7 +#define LED_SCROLL_LOCK_PIN B5 +#define LED_PIN_ON_STATE 0 + /* number of backlight levels */ #define BACKLIGHT_PIN B6 #ifdef BACKLIGHT_PIN diff --git a/keyboards/mt980/mt980.c b/keyboards/mt980/mt980.c index 5461a3b21f..69f7cc491a 100644 --- a/keyboards/mt980/mt980.c +++ b/keyboards/mt980/mt980.c @@ -1,65 +1 @@ #include "mt980.h" - -__attribute__ ((weak)) -void matrix_init_keymap(void) {} - -__attribute__ ((weak)) -void matrix_scan_keymap(void) {} - -__attribute__ ((weak)) -bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { - return true; -} -__attribute__ ((weak)) -uint32_t layer_state_set_keymap (uint32_t state) { - return state; -} -__attribute__ ((weak)) -void led_set_keymap(uint8_t usb_led) {} - -void matrix_init_user(void) { - matrix_init_keymap(); -} - -void matrix_scan_user(void) { - matrix_scan_keymap(); -} - -void keyboard_pre_init_user(void) { - /* Set NUMLOCK indicator pin as output */ - setPinOutput(C6); - /* Set CAPSLOCK indicator pin as output */ - setPinOutput(C7); - /* Set SCROLLOCK indicator pin as output */ - setPinOutput(B5); -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return process_record_keymap(keycode, record); -} - -void led_set_user(uint8_t usb_led) { - - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - writePinLow(C6); - } - else { - writePinHigh(C6); - } - - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(C7); - } - else { - writePinHigh(C7); - } - - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinLow(B5); - } - else { - writePinHigh(B5); - } - - led_set_keymap(usb_led); -} diff --git a/keyboards/omnikeyish/config.h b/keyboards/omnikeyish/config.h index d510c64c9b..1bce90526f 100644 --- a/keyboards/omnikeyish/config.h +++ b/keyboards/omnikeyish/config.h @@ -24,9 +24,9 @@ #endif #define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, C7, C6, C5, C4, C3, C2, C1, C0, B0, B1, B2, B3, B4, B5, B6 } -#define NUMLOCKLEDPIN E0 -#define CAPSLOCKLEDPIN E1 -#define SCROLLLOCKLEDPIN B7 +#define LED_NUM_LOCK_PIN E0 +#define LED_CAPS_LOCK_PIN E1 +#define LED_SCROLL_LOCK_PIN B7 /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION ROW2COL diff --git a/keyboards/omnikeyish/omnikeyish.c b/keyboards/omnikeyish/omnikeyish.c index d7b68d41ab..9b8ce7b972 100644 --- a/keyboards/omnikeyish/omnikeyish.c +++ b/keyboards/omnikeyish/omnikeyish.c @@ -1,11 +1,6 @@ #include "omnikeyish.h" void keyboard_pre_init_user(void) { - /* Configure LED driving pins as output pins */ - setPinOutput(NUMLOCKLEDPIN); - setPinOutput(CAPSLOCKLEDPIN); - setPinOutput(SCROLLLOCKLEDPIN); - dynamic_macro_init(); } @@ -33,23 +28,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } - -void led_set_user(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - writePinHigh(NUMLOCKLEDPIN); - } else { - writePinLow(NUMLOCKLEDPIN); - } - - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinHigh(CAPSLOCKLEDPIN); - } else { - writePinLow(CAPSLOCKLEDPIN); - } - - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinHigh(SCROLLLOCKLEDPIN); - } else { - writePinLow(SCROLLLOCKLEDPIN); - } -}
\ No newline at end of file diff --git a/keyboards/tkc/m0lly/config.h b/keyboards/tkc/m0lly/config.h index 29bd8411e3..77480995c8 100644 --- a/keyboards/tkc/m0lly/config.h +++ b/keyboards/tkc/m0lly/config.h @@ -43,6 +43,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define LED_NUM_LOCK_PIN D2 +#define LED_CAPS_LOCK_PIN D3 +#define LED_SCROLL_LOCK_PIN D4 + #define BACKLIGHT_PIN B6 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/tkc/m0lly/m0lly.c b/keyboards/tkc/m0lly/m0lly.c index e47f9531e1..e04407a35b 100644 --- a/keyboards/tkc/m0lly/m0lly.c +++ b/keyboards/tkc/m0lly/m0lly.c @@ -14,63 +14,13 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "m0lly.h" -#include "led.h" void keyboard_pre_init_kb(void) { - setPinInputHigh(D0); - setPinInputHigh(D1); + setPinInputHigh(D0); + setPinInputHigh(D1); - keyboard_pre_init_user(); -} - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - led_init_ports(); - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware + setPinOutput(B7); + writePinHigh(B7); - return process_record_user(keycode, record); + keyboard_pre_init_user(); } - -void led_init_ports(void) { - DDRD |= (1<<2) | (1<<3) | (1<<4); // OUT - DDRB |= (1<<7); // OUT - PORTB |= (1<<7); -} - -void led_set_kb(uint8_t usb_led) { -// led_set_user(usb_led); - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // Turn numlock on - PORTD |= (1<<2); - } else { - // Turn numlock off - PORTD &= ~(1<<2); - } - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // Turn capslock on - PORTD |= (1<<3); - } else { - // Turn capslock off - PORTD &= ~(1<<3); - } - if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { - // Turn scrolllock on - PORTD |= (1<<4); - } else { - // Turn scrolllock off - PORTD &= ~(1<<4); - } -}
\ No newline at end of file diff --git a/keyboards/tkc/tkc1800/config.h b/keyboards/tkc/tkc1800/config.h index 9c35699c92..f54583c2b1 100644 --- a/keyboards/tkc/tkc1800/config.h +++ b/keyboards/tkc/tkc1800/config.h @@ -43,6 +43,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define LED_NUM_LOCK_PIN D2 +#define LED_CAPS_LOCK_PIN D3 +#define LED_SCROLL_LOCK_PIN D4 + #define BACKLIGHT_PIN B6 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/tkc/tkc1800/tkc1800.c b/keyboards/tkc/tkc1800/tkc1800.c index 4232c97d54..08e4e0bb3b 100644 --- a/keyboards/tkc/tkc1800/tkc1800.c +++ b/keyboards/tkc/tkc1800/tkc1800.c @@ -14,63 +14,13 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "tkc1800.h" -#include "led.h" void keyboard_pre_init_kb(void) { - setPinInputHigh(D0); - setPinInputHigh(D1); + setPinInputHigh(D0); + setPinInputHigh(D1); - keyboard_pre_init_user(); -} - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - led_init_ports(); - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware + setPinOutput(B7); + writePinHigh(B7); - return process_record_user(keycode, record); + keyboard_pre_init_user(); } - -void led_init_ports(void) { - DDRD |= (1<<2) | (1<<3) | (1<<4); // OUT - DDRB |= (1<<7); // OUT - PORTB |= (1<<7); -} - -void led_set_kb(uint8_t usb_led) { -// led_set_user(usb_led); - if (usb_led & (1<<USB_LED_NUM_LOCK)) { - // Turn numlock on - PORTD |= (1<<2); - } else { - // Turn numlock off - PORTD &= ~(1<<2); - } - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // Turn capslock on - PORTD |= (1<<3); - } else { - // Turn capslock off - PORTD &= ~(1<<3); - } - if (usb_led & (1<<USB_LED_SCROLL_LOCK)) { - // Turn scrolllock on - PORTD |= (1<<4); - } else { - // Turn scrolllock off - PORTD &= ~(1<<4); - } -}
\ No newline at end of file diff --git a/keyboards/xd84/config.h b/keyboards/xd84/config.h index 2a77db68a4..503cba3187 100644 --- a/keyboards/xd84/config.h +++ b/keyboards/xd84/config.h @@ -47,6 +47,9 @@ /* COL2ROW, ROW2COL */ //#define DIODE_DIRECTION COL2ROW +#define LED_CAPS_LOCK_PIN B6 +#define LED_PIN_ON_STATE 0 + #define BACKLIGHT_PIN B5 #define BACKLIGHT_LEVELS 10 // #define BACKLIGHT_BREATHING diff --git a/keyboards/xd84/xd84.c b/keyboards/xd84/xd84.c index eaf531421b..dec4ef95e2 100644 --- a/keyboards/xd84/xd84.c +++ b/keyboards/xd84/xd84.c @@ -14,19 +14,3 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "xd84.h" - -void keyboard_pre_init_kb(void) { - setPinOutput(B6); - - keyboard_pre_init_user(); -} - -void led_set_kb(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(B6); - } else { - writePinHigh(B6); - } - - led_set_user(usb_led); -} diff --git a/keyboards/xd84pro/config.h b/keyboards/xd84pro/config.h index 7fd4496fe3..01f410ea6b 100644 --- a/keyboards/xd84pro/config.h +++ b/keyboards/xd84pro/config.h @@ -35,6 +35,9 @@ #define DIODE_DIRECTION COL2ROW +#define LED_CAPS_LOCK_PIN B2 +#define LED_PIN_ON_STATE 0 + #define RGB_DI_PIN F6 #ifdef RGB_DI_PIN #define RGBLED_NUM 12 diff --git a/keyboards/xd84pro/xd84pro.c b/keyboards/xd84pro/xd84pro.c index cba8a57f26..0eb52fda0f 100644 --- a/keyboards/xd84pro/xd84pro.c +++ b/keyboards/xd84pro/xd84pro.c @@ -14,17 +14,3 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "xd84pro.h" - -void keyboard_pre_init_kb(void) { - led_init_ports(); - keyboard_pre_init_user(); -} -void led_init_ports(void) { - setPinOutput(B2); -} -bool led_update_kb(led_t led_state) { - if (led_update_user(led_state)) { - writePin(B2, !led_state.caps_lock); - } - return false; -}
\ No newline at end of file diff --git a/keyboards/xd96/config.h b/keyboards/xd96/config.h index 799b835df0..cf6fec1b96 100644 --- a/keyboards/xd96/config.h +++ b/keyboards/xd96/config.h @@ -47,6 +47,10 @@ /* COL2ROW, ROW2COL */ //#define DIODE_DIRECTION COL2ROW +#define LED_NUM_LOCK_PIN C6 +#define LED_CAPS_LOCK_PIN B6 +#define LED_PIN_ON_STATE 0 + #define BACKLIGHT_PIN B5 #define BACKLIGHT_LEVELS 10 // #define BACKLIGHT_BREATHING diff --git a/keyboards/xd96/xd96.c b/keyboards/xd96/xd96.c index e2af9f1004..2c67ee3d7c 100644 --- a/keyboards/xd96/xd96.c +++ b/keyboards/xd96/xd96.c @@ -14,29 +14,3 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include "xd96.h" - -#define CAPS_PIN B6 -#define NUMLOCK_PIN C6 - -void keyboard_pre_init_kb(void) { - setPinOutput(CAPS_PIN); - setPinOutput(NUMLOCK_PIN); - - keyboard_pre_init_user(); -} - -void led_set_kb(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinLow(CAPS_PIN); - } else { - writePinHigh(CAPS_PIN); - } - - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - writePinLow(NUMLOCK_PIN); - } else { - writePinHigh(NUMLOCK_PIN); - } - - led_set_user(usb_led); -} diff --git a/keyboards/yd68/config.h b/keyboards/yd68/config.h index 17461c5dc3..7b4a43bfde 100644 --- a/keyboards/yd68/config.h +++ b/keyboards/yd68/config.h @@ -48,6 +48,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW +#define LED_CAPS_LOCK_PIN D4 +#define LED_PIN_ON_STATE 0 + // #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING // #define BACKLIGHT_LEVELS 3 diff --git a/keyboards/yd68/yd68.c b/keyboards/yd68/yd68.c index f34661dd37..22f75f7f81 100644 --- a/keyboards/yd68/yd68.c +++ b/keyboards/yd68/yd68.c @@ -15,59 +15,22 @@ */ #include "yd68.h" -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - //Capslock LED Output Low - DDRD |= (1<<4); - PORTD &= ~(1<<4); - +void keyboard_pre_init_kb(void) { //Backlight LEDs Output Low - DDRD |= (1<<6); - PORTD &= ~(1<<6); + setPinOutput(D6); + writePinLow(D6); //RGB power output low - DDRE |= (1<<2); - PORTE &= ~(1<<2); + setPinOutput(E2); + writePinLow(E2); //Bluetooth power output high - DDRB |= (1<<2); - PORTB |= (1<<2); + setPinOutput(B2); + writePinLow(B2); //RGB data output low - DDRB |= (1<<3); - PORTB &= ~(1<<3); - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + setPinOutput(B3); + writePinLow(B3); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output low - DDRD |= (1<<4); - PORTD &= ~(1<<4); - } else { - // output high - DDRD |= (1<<4); - PORTD |= (1<<4); - } - - led_set_user(usb_led); + keyboard_pre_init_user(); } diff --git a/keyboards/z150_bh/config.h b/keyboards/z150_bh/config.h index fc33021ffc..9fa1f0c527 100644 --- a/keyboards/z150_bh/config.h +++ b/keyboards/z150_bh/config.h @@ -22,6 +22,10 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define LED_NUM_LOCK_PIN E7 +#define LED_CAPS_LOCK_PIN B0 +#define LED_SCROLL_LOCK_PIN E6 + /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 diff --git a/keyboards/z150_bh/z150_bh.c b/keyboards/z150_bh/z150_bh.c index 6db784b56e..b75a1ff198 100644 --- a/keyboards/z150_bh/z150_bh.c +++ b/keyboards/z150_bh/z150_bh.c @@ -1,32 +1 @@ #include "z150_bh.h" - -void matrix_init_kb(void) { - setPinOutput(B0); - setPinOutput(E6); - setPinOutput(E7); - - matrix_init_user(); -}; - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { - writePinHigh(E7); - } else { - writePinLow(E7); - } - - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { - writePinHigh(B0); - } else { - writePinLow(B0); - } - - if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { - writePinHigh(E6); - } else { - writePinLow(E6); - } - - led_set_user(usb_led); -} |