diff options
100 files changed, 3641 insertions, 322 deletions
diff --git a/keyboards/cannonkeys/obliterated75/chconf.h b/keyboards/cannonkeys/obliterated75/chconf.h new file mode 100644 index 0000000000..03f63da36a --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM FALSE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES FALSE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES FALSE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/cannonkeys/obliterated75/config.h b/keyboards/cannonkeys/obliterated75/config.h new file mode 100644 index 0000000000..bff3030b51 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCA04 +#define PRODUCT_ID 0x0B75 +#define DEVICE_VER 0x0001 +#define MANUFACTURER CannonKeys +#define PRODUCT Obliterated75 +#define DESCRIPTION Obliterated75 Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +#define MATRIX_COL_PINS { A5, B10, A3, A2, B0, A9, C13, B9, B8, B7, B6, B5, B4, B3, A15, A14 } +#define MATRIX_ROW_PINS { A13, B12, B11, B14, A8, A1 } +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN A6 +#define BACKLIGHT_PWM_DRIVER PWMD3 +#define BACKLIGHT_PWM_CHANNEL 1 +#define BACKLIGHT_PAL_MODE 1 +#define BACKLIGHT_LEVELS 6 +#define BACKLIGHT_BREATHING +#define BREATHING_PERIOD 6 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGBLIGHT_ANIMATIONS +#define RGB_DI_PIN B15 +#define RGBLED_NUM 20 +#define WS2812_SPI SPID2 +#define WS2812_SPI_MOSI_PAL_MODE 0 + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/obliterated75/halconf.h b/keyboards/cannonkeys/obliterated75/halconf.h new file mode 100644 index 0000000000..921803762e --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/cannonkeys/obliterated75/info.json b/keyboards/cannonkeys/obliterated75/info.json new file mode 100644 index 0000000000..b62cee36ca --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Obliterated75", + "url": "https://cannonkeys.com", + "maintainer": "awkannan", + "width": 16, + "height": 6.25, + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1.5, "y":0}, {"x":2.5, "y":0}, {"x":3.5, "y":0}, {"x":4.5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":15, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"x":15, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, {"x":15, "y":3.25}, {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"x":15, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":11.25, "y":5.25, "w":1.25}, {"x":13, "y":5.25}, {"x":14, "y":5.25}, {"x":15, "y":5.25}] + } + } +} diff --git a/keyboards/cannonkeys/obliterated75/keymaps/default/keymap.c b/keyboards/cannonkeys/obliterated75/keymaps/default/keymap.c new file mode 100644 index 0000000000..2934aae189 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_names { + _BASE, + _FN1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN1] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, RGB_TOG, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, + BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/cannonkeys/obliterated75/keymaps/via/keymap.c b/keyboards/cannonkeys/obliterated75/keymaps/via/keymap.c new file mode 100644 index 0000000000..68fe4f7885 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/keymaps/via/keymap.c @@ -0,0 +1,71 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUBS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUHS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN1] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, RGB_TOG, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, + BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + BL_INC, BL_DEC, BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS + ), + + + [_FN2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_FN3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; diff --git a/keyboards/sirius/uni660/keymaps/via/rules.mk b/keyboards/cannonkeys/obliterated75/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/sirius/uni660/keymaps/via/rules.mk +++ b/keyboards/cannonkeys/obliterated75/keymaps/via/rules.mk diff --git a/keyboards/cannonkeys/obliterated75/mcuconf.h b/keyboards/cannonkeys/obliterated75/mcuconf.h new file mode 100644 index 0000000000..43fe0a462e --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/mcuconf.h @@ -0,0 +1,176 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF +// #define STM32F070xB + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/obliterated75/obliterated75.c b/keyboards/cannonkeys/obliterated75/obliterated75.c new file mode 100644 index 0000000000..347a643836 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/obliterated75.c @@ -0,0 +1 @@ +#include "obliterated75.h" diff --git a/keyboards/cannonkeys/obliterated75/obliterated75.h b/keyboards/cannonkeys/obliterated75/obliterated75.h new file mode 100644 index 0000000000..895223a1fd --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/obliterated75.h @@ -0,0 +1,19 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K006, K007, K008, K009, K010, K011, K012, K013, K015, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ + K500, K501, K502, K506, K510, K511, K512, K513, K515 \ +) { \ + { K000, K001, K002, K003, K004, KC_NO, K006, K007, K008, K009, K010, K011, K012, K013, KC_NO, K015 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415 }, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, KC_NO, K515 } \ +} diff --git a/keyboards/cannonkeys/obliterated75/readme.md b/keyboards/cannonkeys/obliterated75/readme.md new file mode 100644 index 0000000000..372b5500d1 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/readme.md @@ -0,0 +1,10 @@ +# CannonKeys Obliterated75 + +* Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan) +* Hardware Supported: STM32F072CBT6 + +Make example for this keyboard (after setting up your build environment): + + make cannonkeys/obliterated75:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/obliterated75/rules.mk b/keyboards/cannonkeys/obliterated75/rules.mk new file mode 100644 index 0000000000..350b0d5324 --- /dev/null +++ b/keyboards/cannonkeys/obliterated75/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = STM32F072 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +WS2812_DRIVER = spi + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/cospad/config.h b/keyboards/cospad/config.h index 42db8e25b7..362f6c38b1 100644 --- a/keyboards/cospad/config.h +++ b/keyboards/cospad/config.h @@ -65,7 +65,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. // #define RGBLIGHT_SAT_STEP 8 // #define RGBLIGHT_VAL_STEP 8 // #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ -// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ // /*== all animations enable ==*/ #define RGBLIGHT_ANIMATIONS // /*== or choose animations ==*/ diff --git a/keyboards/handwired/p1800fl/config.h b/keyboards/handwired/p1800fl/config.h new file mode 100644 index 0000000000..c2022a6b27 --- /dev/null +++ b/keyboards/handwired/p1800fl/config.h @@ -0,0 +1,72 @@ +/* +Copyright 2020 marhalloweenvt + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x3EAE +#define DEVICE_VER 0x0001 +#define MANUFACTURER marhalloweenvt +#define PRODUCT p1800fl +#define DESCRIPTION A compact 1800 layout keyboard + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B6, B5, B4, D7, D6, D4 } +#define MATRIX_COL_PINS { C7, F7, F6, F5, F4, F1, F0, E6, B0, B1, B2, B3, D0, D1, D2} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* QMK DFU key configuration */ +#define QMK_ESC_OUTPUT C7 // usually COL +#define QMK_ESC_INPUT B6 // usually ROW
\ No newline at end of file diff --git a/keyboards/handwired/p1800fl/info.json b/keyboards/handwired/p1800fl/info.json new file mode 100644 index 0000000000..1509b59d96 --- /dev/null +++ b/keyboards/handwired/p1800fl/info.json @@ -0,0 +1,99 @@ +{ + "keyboard_name": "p1800fl", + "url": "", + "maintainer": "marhalloweenvt", + "width": 19.5, + "height": 5.25, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Num Lock", "x":15.5, "y":0}, + {"label":"/", "x":16.5, "y":0}, + {"label":"*", "x":17.5, "y":0}, + {"label":"-", "x":18.5, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + {"label":"7", "x":15.5, "y":1}, + {"label":"8", "x":16.5, "y":1}, + {"label":"9", "x":17.5, "y":1}, + {"label":"+", "x":18.5, "y":1}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":2, "w":1.25}, + {"label":"4", "x":15.5, "y":2}, + {"label":"5", "x":16.5, "y":2}, + {"label":"6", "x":17.5, "y":2}, + {"label":"+", "x":18.5, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"Shift", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"1", "x":15.5, "y":3}, + {"label":"2", "x":16.5, "y":3}, + {"label":"3", "x":17.5, "y":3}, + {"label":"Enter", "x":18.5, "y":3}, + {"label":"Up", "x":14.25, "y":3.25}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"6.25x", "x":3.75, "y":4, "w":6.25}, + {"label":"Ctrl", "x":10, "y":4}, + {"label":"Win", "x":11, "y":4}, + {"label":"Alt", "x":12, "y":4}, + {"label":"0", "x":16.5, "y":4}, + {"label":".", "x":17.5, "y":4}, + {"label":"Enter", "x":18.5, "y":4}, + {"label":"Left", "x":13.25, "y":4.25}, + {"label":"Down", "x":14.25, "y":4.25}, + {"label":"Right", "x":15.25, "y":4.25} + ] + } + } +} diff --git a/keyboards/handwired/p1800fl/keymaps/default/keymap.c b/keyboards/handwired/p1800fl/keymaps/default/keymap.c new file mode 100644 index 0000000000..03b6a1efd0 --- /dev/null +++ b/keyboards/handwired/p1800fl/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* Copyright 2020 marhalloweenvt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PEQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + [_FN] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, BL_TOGG, BL_INC, KC_PAST, RESET, + _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, BL_BRTG, BL_DEC, _______, EEP_RST, + _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLU, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/handwired/p1800fl/keymaps/default/readme.md b/keyboards/handwired/p1800fl/keymaps/default/readme.md new file mode 100644 index 0000000000..268d399224 --- /dev/null +++ b/keyboards/handwired/p1800fl/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for p1800fl diff --git a/keyboards/handwired/p1800fl/p1800fl.c b/keyboards/handwired/p1800fl/p1800fl.c new file mode 100644 index 0000000000..e0fc16a5e7 --- /dev/null +++ b/keyboards/handwired/p1800fl/p1800fl.c @@ -0,0 +1,28 @@ +/* Copyright 2020 marhalloweenvt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "p1800fl.h" + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if(res) { + writePin(D3, led_state.num_lock); + writePin(D5, led_state.caps_lock); + writePin(C6, led_state.scroll_lock); + } + return res; +} + diff --git a/keyboards/handwired/p1800fl/p1800fl.h b/keyboards/handwired/p1800fl/p1800fl.h new file mode 100644 index 0000000000..7b8f3dcffd --- /dev/null +++ b/keyboards/handwired/p1800fl/p1800fl.h @@ -0,0 +1,42 @@ +/* Copyright 2020 marhalloweenvt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k50, k51, k52, k53, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k54, k55, k56, k57, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k58, k59, k5a, k5b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k5c, k5d, k5e, k4e, \ + k40, k41, k42, k43, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, KC_NO }, \ + { k40, k41, k42, k43, KC_NO, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e }, \ + { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5a, k5b, k5c, k5d, k5e }, \ +} diff --git a/keyboards/handwired/p1800fl/readme.md b/keyboards/handwired/p1800fl/readme.md new file mode 100644 index 0000000000..545bd691a4 --- /dev/null +++ b/keyboards/handwired/p1800fl/readme.md @@ -0,0 +1,15 @@ +# p1800fl + + + +A 1800 Frow-less keyboard project from our local makers. + +* Keyboard Maintainer: [marhalloweenvt](https://github.com/marhalloweenvt) +* Hardware Supported: p1800fl +* Hardware Availability: p1800fl + +Make example for this keyboard (after setting up your build environment): + + make handwired/p1800fl:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/p1800fl/rules.mk b/keyboards/handwired/p1800fl/rules.mk new file mode 100644 index 0000000000..b8601f0f10 --- /dev/null +++ b/keyboards/handwired/p1800fl/rules.mk @@ -0,0 +1,32 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs diff --git a/keyboards/jj4x4/config.h b/keyboards/jj4x4/config.h index 8c5b1988d6..45c8671cc5 100644 --- a/keyboards/jj4x4/config.h +++ b/keyboards/jj4x4/config.h @@ -19,8 +19,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" -#define VENDOR_ID 0x20A0 -#define PRODUCT_ID 0x422D +#define VENDOR_ID 0x4B50 // "KP" +#define PRODUCT_ID 0x0044 // 4x4 #define DEVICE_VER 0x0200 #define MANUFACTURER KPrepublic #define PRODUCT JJ4x4 diff --git a/keyboards/jj4x4/info.json b/keyboards/jj4x4/info.json index 602fdc90a3..0fff9b9c88 100644 --- a/keyboards/jj4x4/info.json +++ b/keyboards/jj4x4/info.json @@ -1,30 +1,30 @@ { - "keyboard_name": "jj4x4", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 4, - "layouts": { - "LAYOUT_ortho_4x4": { - "key_count": 16, - "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2}, - {"x":3, "y":2}, - {"x":0, "y":3}, - {"x":1, "y":3}, - {"x":2, "y":3}, - {"x":3, "y":3} - ] + "keyboard_name": "JJ4x4", + "url": "", + "maintainer": "qmk", + "width": 4, + "height": 4, + "layouts": { + "LAYOUT_ortho_4x4": { + "key_count": 16, + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3} + ] + } } - } -}
\ No newline at end of file +} diff --git a/keyboards/jj4x4/jj4x4.h b/keyboards/jj4x4/jj4x4.h index 7b8cb81835..ee17e896dd 100644 --- a/keyboards/jj4x4/jj4x4.h +++ b/keyboards/jj4x4/jj4x4.h @@ -28,14 +28,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * represents the switch matrix. */ #define LAYOUT_ortho_4x4( \ - K01, K02, K03, K04, \ - K11, K12, K13, K14, \ - K21, K22, K23, K24, \ - K31, K32, K33, K34 \ -) \ -{ \ - { K01, K02, K03, K04 }, \ - { K11, K12, K13, K14 }, \ - { K21, K22, K23, K24 }, \ - { K31, K32, K33, K34 } \ -} + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 } \ +} diff --git a/keyboards/jj4x4/keymaps/default/keymap.c b/keyboards/jj4x4/keymaps/default/keymap.c index a0b06ee92a..ae2c6b5417 100644 --- a/keyboards/jj4x4/keymaps/default/keymap.c +++ b/keyboards/jj4x4/keymaps/default/keymap.c @@ -13,61 +13,56 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ + #include QMK_KEYBOARD_H enum layers { - _BASE = 0, - _FN1, - _FN2, + _BASE = 0, + _FN1, + _FN2 }; // Defines the keycodes used by our macros in process_record_user enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL + QMKBEST = SAFE_RANGE, + QMKURL }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [_BASE] = LAYOUT_ortho_4x4( - KC_PGUP, KC_HOME, KC_UP, KC_END , \ - KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, \ - MO(_FN2), KC_VOLU, KC_MPLY, KC_MPRV, \ - MO(_FN1), KC_VOLD, KC_MUTE, KC_MNXT \ - ), - [_FN1] = LAYOUT_ortho_4x4( - KC_ESC, KC_P7, KC_P8, KC_P9, \ - KC_TAB, KC_P4, KC_P5, KC_P6, \ - KC_ENT, KC_P1, KC_P2, KC_P3, \ - _______, KC_P0, KC_P0, KC_DOT \ - ), - [_FN2] = LAYOUT_ortho_4x4( - RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, \ - _______, _______, _______, RESET, \ - BL_STEP, _______, QMKBEST, QMKURL \ - ) - + [_BASE] = LAYOUT_ortho_4x4( + KC_PGUP, KC_HOME, KC_UP, KC_END, + KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, + MO(_FN2), KC_VOLU, KC_MPLY, KC_MPRV, + MO(_FN1), KC_VOLD, KC_MUTE, KC_MNXT + ), + [_FN1] = LAYOUT_ortho_4x4( + KC_ESC, KC_P7, KC_P8, KC_P9, + KC_TAB, KC_P4, KC_P5, KC_P6, + KC_ENT, KC_P1, KC_P2, KC_P3, + _______, KC_P0, KC_P0, KC_DOT + ), + [_FN2] = LAYOUT_ortho_4x4( + RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, + RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, + _______, _______, _______, RESET, + BL_STEP, _______, QMKBEST, QMKURL + ) }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); - } else { - // when keycode QMKURL is released - } - break; - } - return true; + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/\n"); + } + break; + } + return true; } diff --git a/keyboards/jj4x4/keymaps/via/keymap.c b/keyboards/jj4x4/keymaps/via/keymap.c new file mode 100644 index 0000000000..35ca0e361d --- /dev/null +++ b/keyboards/jj4x4/keymaps/via/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2020 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_ortho_4x4( + KC_P7, KC_P8, KC_P9, KC_PSLS, + KC_P4, KC_P5, KC_P6, KC_PAST, + KC_P1, KC_P2, KC_P3, KC_PMNS, + KC_P0, KC_PDOT, KC_PPLS, LT(1, KC_ENT) + ), + LAYOUT_ortho_4x4( + RESET, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ), + LAYOUT_ortho_4x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ), + LAYOUT_ortho_4x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______ + ) +}; diff --git a/keyboards/jj4x4/keymaps/via/rules.mk b/keyboards/jj4x4/keymaps/via/rules.mk new file mode 100644 index 0000000000..82fb80d5e7 --- /dev/null +++ b/keyboards/jj4x4/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +EXTRAKEY_ENABLE = no +MOUSEKEY_ENABLE = no diff --git a/keyboards/jj4x4/README.md b/keyboards/jj4x4/readme.md index 24212bc990..714e8e88f7 100644 --- a/keyboards/jj4x4/README.md +++ b/keyboards/jj4x4/readme.md @@ -1,8 +1,8 @@ -# jj4x4 +# JJ4x4  -A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the jj40 with rearranged keys. +A 4x4 keypad kit made and KPRepublic on AliExpress. This is a chopped off version of the JJ40 with rearranged keys. * Keyboard Maintainer: [QMK Community](https://github.com/qmk) * Hardware Supported: Atmega32A @@ -18,22 +18,22 @@ Flashing example for this keyboard ([after setting up the bootloadHID flashing e **Reset Key**: -Hold down the key located at *K12*, commonly programmed as *8* while plugging in the keyboard USB cable. +Hold down the key located at *K11*, commonly programmed as *8* while plugging in the keyboard USB cable. -Key *K12* is in the above picture: +Key *K11* is in the above picture: Row 2 from the top, Column 2 from the left, see the schematic below: ``` - ,-----------------------. - | | | | | - |-----`-----`-----`-----| - | | K12 | | | - |-----`-----`-----`-----| - | | | | | - |-----`-----`-----`-----| - | | | | | - `-----`-----`-----`-----' +,-----------------------. +| | | | | +|-----`-----`-----`-----| +| | K11 | | | +|-----`-----`-----`-----| +| | | | | +|-----`-----`-----`-----| +| | | | | +`-----`-----`-----`-----' ``` See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jj4x4/rules.mk b/keyboards/jj4x4/rules.mk index 82e25e6a7a..5ff5c37692 100644 --- a/keyboards/jj4x4/rules.mk +++ b/keyboards/jj4x4/rules.mk @@ -31,6 +31,6 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches -HD44780_ENABLE = no # Enable support for HD44780 based LCDs +HD44780_ENABLE = no # Enable support for HD44780 based LCDs LAYOUTS = ortho_4x4 diff --git a/keyboards/keebio/bdn9/bdn9.c b/keyboards/keebio/bdn9/bdn9.c index 0ff55fd6d4..f3842d0989 100644 --- a/keyboards/keebio/bdn9/bdn9.c +++ b/keyboards/keebio/bdn9/bdn9.c @@ -1 +1,18 @@ #include "bdn9.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/chocopad/chocopad.c b/keyboards/keebio/chocopad/chocopad.c index f54753af50..db62f02cc5 100644 --- a/keyboards/keebio/chocopad/chocopad.c +++ b/keyboards/keebio/chocopad/chocopad.c @@ -1 +1,18 @@ #include "chocopad.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/dilly/dilly.c b/keyboards/keebio/dilly/dilly.c index 89affe8509..da17277f69 100644 --- a/keyboards/keebio/dilly/dilly.c +++ b/keyboards/keebio/dilly/dilly.c @@ -1 +1,18 @@ #include "dilly.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(3); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/ergodicity/ergodicity.c b/keyboards/keebio/ergodicity/ergodicity.c index 0bbcf61178..790dc2f61e 100644 --- a/keyboards/keebio/ergodicity/ergodicity.c +++ b/keyboards/keebio/ergodicity/ergodicity.c @@ -1,51 +1,18 @@ -/* Copyright 2019 Keebio - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ #include "ergodicity.h" -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. - -/* - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); } - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - led_set_user(usb_led); -} - -*/ diff --git a/keyboards/keebio/iris/keymaps/dvorak/config.h b/keyboards/keebio/iris/keymaps/dvorak/config.h new file mode 100644 index 0000000000..d37d3c3123 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/config.h @@ -0,0 +1,33 @@ +/* +Copyright 2017 Danny Nguyen <danny@keeb.io> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL + +/* Select hand configuration */ + +#define MASTER_LEFT + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/keebio/iris/keymaps/dvorak/keebio_iris_rev2_layout_dvorak.json b/keyboards/keebio/iris/keymaps/dvorak/keebio_iris_rev2_layout_dvorak.json new file mode 100644 index 0000000000..be5cc37938 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/keebio_iris_rev2_layout_dvorak.json @@ -0,0 +1,192 @@ +{ + "author": "", + "layers": [ + [ + "KC_ESC", + "KC_1", + "KC_2", + "KC_3", + "KC_4", + "KC_5", + "KC_6", + "KC_7", + "KC_8", + "KC_9", + "KC_0", + "KC_BSPC", + "KC_TAB", + "KC_QUOT", + "KC_COMM", + "KC_DOT", + "KC_P", + "KC_Y", + "KC_F", + "KC_G", + "KC_C", + "KC_R", + "KC_L", + "KC_SLSH", + "KC_LCTL", + "KC_A", + "KC_O", + "KC_E", + "KC_U", + "KC_I", + "KC_D", + "KC_H", + "KC_T", + "KC_N", + "KC_S", + "KC_MINS", + "KC_LSFT", + "KC_SCLN", + "KC_Q", + "KC_J", + "KC_K", + "KC_X", + "KC_HOME", + "KC_END", + "KC_B", + "KC_M", + "KC_W", + "KC_V", + "KC_Z", + "KC_RSFT", + "MO(1)", + "KC_LGUI", + "KC_ENT", + "KC_SPC", + "KC_RALT", + "MO(2)" + ], + [ + "KC_TILD", + "KC_EXLM", + "KC_AT", + "KC_HASH", + "KC_DLR", + "KC_PERC", + "KC_CIRC", + "KC_AMPR", + "KC_ASTR", + "KC_LPRN", + "KC_RPRN", + "KC_BSPC", + "RESET", + "KC_1", + "KC_2", + "KC_3", + "KC_4", + "KC_5", + "KC_6", + "KC_7", + "KC_8", + "KC_9", + "KC_0", + "KC_GRV", + "KC_DEL", + "KC_NO", + "KC_LEFT", + "KC_RGHT", + "KC_UP", + "KC_LCBR", + "KC_RCBR", + "KC_P4", + "KC_P5", + "KC_P6", + "KC_PPLS", + "KC_BSPC", + "BL_INC", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_DOWN", + "KC_LBRC", + "KC_LPRN", + "KC_RPRN", + "KC_RBRC", + "KC_P1", + "KC_P2", + "KC_P3", + "KC_PMNS", + "KC_PIPE", + "KC_NO", + "KC_NO", + "KC_DEL", + "KC_DEL", + "KC_NO", + "KC_P0" + ], + [ + "KC_F12", + "KC_F1", + "KC_F2", + "KC_F3", + "KC_F4", + "KC_F5", + "KC_F6", + "KC_F7", + "KC_F8", + "KC_F9", + "KC_F10", + "KC_F11", + "RGB_TOG", + "KC_EXLM", + "KC_AT", + "KC_HASH", + "KC_DLR", + "KC_PERC", + "KC_CIRC", + "KC_AMPR", + "KC_ASTR", + "KC_LPRN", + "KC_RPRN", + "KC_NO", + "RGB_MOD", + "KC_MRWD", + "KC_MFFD", + "KC_VOLU", + "KC_PGUP", + "KC_UNDS", + "KC_PEQL", + "KC_HOME", + "RGB_HUI", + "RGB_SAI", + "RGB_VAI", + "KC_BSLS", + "KC_MUTE", + "KC_MSTP", + "KC_MPLY", + "KC_VOLD", + "KC_PGDN", + "KC_PMNS", + "KC_NO", + "KC_NO", + "KC_PPLS", + "KC_END", + "RGB_HUD", + "RGB_SAD", + "RGB_VAD", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_NO", + "KC_NO" + ] + ], + "layout": "LAYOUT", + "keymap": "keebio_iris_rev2_layout_dvorak.json", + "keyboard": "keebio/iris/rev2", + "documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code. + +To setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs> + +You can convert this file to a keymap.c using this command: `qmk json2c {keymap}` + +You can compile this keymap using this command: `qmk compile {keymap}`\" +", + "notes": "", + "version": 1 +} diff --git a/keyboards/keebio/iris/keymaps/dvorak/keymap.c b/keyboards/keebio/iris/keymaps/dvorak/keymap.c new file mode 100644 index 0000000000..3f0886521c --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/keymap.c @@ -0,0 +1,73 @@ +#include QMK_KEYBOARD_H +enum my_layers { + _DVORAK, + _LOWER, + _RAISE, + _ADJUST +}; + +#define RAISE MO(_RAISE) +#define LOWER MO(_LOWER) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_DVORAK] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_HOME, KC_END, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSFT, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + LOWER, KC_LGUI, KC_ENT, KC_SPC, KC_RALT, RAISE + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ), + + [_LOWER] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRAVE, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + KC_DEL, _______, KC_LEFT, KC_RGHT, KC_UP, KC_LBRC, KC_RBRC, KC_P4, KC_P5, KC_P6, KC_PLUS, KC_BSPC, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + BL_STEP, _______, _______, _______, KC_DOWN, KC_LCBR, KC_LPRN, KC_RPRN, KC_RCBR, KC_P1, KC_P2, KC_P3, KC_MINS, KC_PIPE, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + _______, _______, KC_DEL, KC_DEL, _______, KC_P0 + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ), + + [_RAISE] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + KC_F12, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + RGB_TOG, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + RGB_MOD, KC_MPRV, KC_MNXT, KC_VOLU, KC_PGUP, KC_UNDS, KC_EQL, KC_HOME, RGB_HUI, RGB_SAI, RGB_VAI, KC_BSLS, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + KC_MUTE, KC_MSTP, KC_MPLY, KC_VOLD, KC_PGDN, KC_MINS, _______, _______, KC_PLUS, KC_END, RGB_HUD, RGB_SAD, RGB_VAD, _______, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + _______, _______, _______, _______, _______, _______ + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ), + + [_ADJUST] = LAYOUT( + //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ + _______, _______, _______, _______, _______, _______ + // └────────┴────────┴────────┘ └────────┴────────┴────────┘ + ) +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} diff --git a/keyboards/keebio/iris/keymaps/dvorak/readme.md b/keyboards/keebio/iris/keymaps/dvorak/readme.md new file mode 100644 index 0000000000..8397ef84ac --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/readme.md @@ -0,0 +1,16 @@ + + + +# Dvorak + +``` +make keebio/iris/rev2:dvorak +``` +``` +make keebio/iris/rev3:dvorak +``` +``` +make keebio/iris/rev4:dvorak +``` + +Tested with Iris rev. 2 diff --git a/keyboards/keebio/iris/keymaps/dvorak/rules.mk b/keyboards/keebio/iris/keymaps/dvorak/rules.mk new file mode 100644 index 0000000000..d7463419b4 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/dvorak/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +BACKLIGHT_ENABLE = yes diff --git a/keyboards/keebio/iris/rev2/rev2.c b/keyboards/keebio/iris/rev2/rev2.c index 8575243f0d..70c30695ad 100644 --- a/keyboards/keebio/iris/rev2/rev2.c +++ b/keyboards/keebio/iris/rev2/rev2.c @@ -1,12 +1,5 @@ #include "rev2.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -#endif - #ifdef SWAP_HANDS_ENABLE __attribute__ ((weak)) // swap-hands action needs a matrix to define the swap @@ -26,3 +19,19 @@ const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { }; #endif +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(3); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/iris/rev3/rev3.c b/keyboards/keebio/iris/rev3/rev3.c index 7e49330c1d..f58c2093c4 100644 --- a/keyboards/keebio/iris/rev3/rev3.c +++ b/keyboards/keebio/iris/rev3/rev3.c @@ -1,12 +1,5 @@ #include "rev3.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} -#endif - #ifdef SWAP_HANDS_ENABLE __attribute__ ((weak)) // swap-hands action needs a matrix to define the swap @@ -25,3 +18,20 @@ const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}}, }; #endif + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(3); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/iris/rev4/rev4.c b/keyboards/keebio/iris/rev4/rev4.c index bd0989acb3..de2ba26db3 100644 --- a/keyboards/keebio/iris/rev4/rev4.c +++ b/keyboards/keebio/iris/rev4/rev4.c @@ -1 +1,18 @@ #include "rev4.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(3); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/levinson/rev2/rev2.c b/keyboards/keebio/levinson/rev2/rev2.c index 573fa787ba..8e65af7ade 100644 --- a/keyboards/keebio/levinson/rev2/rev2.c +++ b/keyboards/keebio/levinson/rev2/rev2.c @@ -1,22 +1,18 @@ #include "levinson.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif #endif -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/levinson/rev3/rev3.c b/keyboards/keebio/levinson/rev3/rev3.c index 573fa787ba..8e65af7ade 100644 --- a/keyboards/keebio/levinson/rev3/rev3.c +++ b/keyboards/keebio/levinson/rev3/rev3.c @@ -1,22 +1,18 @@ #include "levinson.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif #endif -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; - + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/nyquist/rev2/rev2.c b/keyboards/keebio/nyquist/rev2/rev2.c index 9922b8995a..b5652e06d3 100644 --- a/keyboards/keebio/nyquist/rev2/rev2.c +++ b/keyboards/keebio/nyquist/rev2/rev2.c @@ -1,21 +1,18 @@ #include "rev2.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif #endif -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/nyquist/rev3/rev3.c b/keyboards/keebio/nyquist/rev3/rev3.c index 34500fb104..6d7dc3531d 100644 --- a/keyboards/keebio/nyquist/rev3/rev3.c +++ b/keyboards/keebio/nyquist/rev3/rev3.c @@ -1,21 +1,18 @@ #include "rev3.h" -#ifdef SSD1306OLED -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - led_set_user(usb_led); -} +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif #endif -void matrix_init_kb(void) { - - // // green led on - // DDRD |= (1<<5); - // PORTD &= ~(1<<5); - - // // orange led on - // DDRB |= (1<<0); - // PORTB &= ~(1<<0); - - matrix_init_user(); -}; + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/quefrency/rev1/rev1.c b/keyboards/keebio/quefrency/rev1/rev1.c index a690a7eff7..567730535d 100644 --- a/keyboards/keebio/quefrency/rev1/rev1.c +++ b/keyboards/keebio/quefrency/rev1/rev1.c @@ -1,5 +1,14 @@ #include "quefrency.h" -void matrix_init_kb(void) { - matrix_init_user(); -}; +void eeconfig_init_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/viterbi/rev2/rev2.c b/keyboards/keebio/viterbi/rev2/rev2.c index 509e42dc51..dbf584f99e 100644 --- a/keyboards/keebio/viterbi/rev2/rev2.c +++ b/keyboards/keebio/viterbi/rev2/rev2.c @@ -1 +1,18 @@ #include "viterbi.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif +#ifdef RGBLIGHT_ENABLE + rgblight_enable(); // Enable RGB by default + rgblight_sethsv(0, 255, 255); // Set default HSV - red hue, full saturation, full brightness +#ifdef RGBLIGHT_ANIMATIONS + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL + 2); // set to RGB_RAINBOW_SWIRL by default +#endif +#endif + + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/maartenwut/plain60/keymaps/via/keymap.c b/keyboards/maartenwut/plain60/keymaps/via/keymap.c index 7e8cfff354..a500f23896 100644 --- a/keyboards/maartenwut/plain60/keymaps/via/keymap.c +++ b/keyboards/maartenwut/plain60/keymaps/via/keymap.c @@ -1,17 +1,32 @@ #include QMK_KEYBOARD_H -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _MA 0 - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, \ - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL) +[0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL), + +[1] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + +[2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + +[3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), }; diff --git a/keyboards/maartenwut/ta65/config.h b/keyboards/maartenwut/ta65/config.h index d54a6273d8..729f21a2e2 100644 --- a/keyboards/maartenwut/ta65/config.h +++ b/keyboards/maartenwut/ta65/config.h @@ -24,7 +24,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define PRODUCT_ID 0x7465 #define DEVICE_VER 0x0001 #define MANUFACTURER Maartenwut -#define PRODUCT TA-65 +#define PRODUCT ta-65 #define DESCRIPTION A universal 65% PCB with underglow. /* key matrix size */ @@ -37,6 +37,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS {D2,D1,D0,D3,D5,C7,C6,B6,B5,F0,F1,F4,F5,F6,F7,B0} #define UNUSED_PINS +#define ENCODERS_PAD_A { B2 } +#define ENCODERS_PAD_B { B1 } + +/* Uncomment if your encoder doesn't react to every turn or skips */ +//#define ENCODER_RESOLUTION 2 + /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/maartenwut/ta65/keymaps/default/keymap.c b/keyboards/maartenwut/ta65/keymaps/default/keymap.c index b04172c759..8bb8a14ba0 100644 --- a/keyboards/maartenwut/ta65/keymaps/default/keymap.c +++ b/keyboards/maartenwut/ta65/keymaps/default/keymap.c @@ -1,17 +1,38 @@ #include QMK_KEYBOARD_H -// Each layer gets a name for readability, which is then used in the keymap matrix below. -// The underscores don't mean anything - you can have a layer called STUFF or any other name. -// Layer names don't all need to be of the same length, obviously, and you can also skip them -// entirely and just use numbers. -#define _MA 0 - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[_MA] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT) +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + }; + +void encoder_update_user(uint8_t index, bool clockwise) { + switch(get_highest_layer(layer_state)){ + case 1: //Layer 1 + if (!clockwise) { // Remove ! to reverse direction + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + break; + default: //Layer 0 + if (!clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + } +} diff --git a/keyboards/maartenwut/ta65/keymaps/via/keymap.c b/keyboards/maartenwut/ta65/keymaps/via/keymap.c new file mode 100644 index 0000000000..e2d96eb9c0 --- /dev/null +++ b/keyboards/maartenwut/ta65/keymaps/via/keymap.c @@ -0,0 +1,33 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSLS, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTRL,MO(2), KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_PSCR, + _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, KC_HOME, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +[3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + +}; diff --git a/keyboards/maartenwut/ta65/keymaps/via/rules.mk b/keyboards/maartenwut/ta65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/maartenwut/ta65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/maartenwut/ta65/rules.mk b/keyboards/maartenwut/ta65/rules.mk index db0567bd03..86efb933bb 100644 --- a/keyboards/maartenwut/ta65/rules.mk +++ b/keyboards/maartenwut/ta65/rules.mk @@ -12,19 +12,24 @@ MCU = atmega32u4 BOOTLOADER = qmk-dfu # Build Options -# comment out to disable the options. +# change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs +ENCODER_ENABLE = yes LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/maartenwut/wasdat/info.json b/keyboards/maartenwut/wasdat/info.json index 8f931f46cf..6154bd5555 100644 --- a/keyboards/maartenwut/wasdat/info.json +++ b/keyboards/maartenwut/wasdat/info.json @@ -185,7 +185,6 @@ {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, - {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, @@ -209,6 +208,7 @@ {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"4", "x":18.5, "y":3.5}, {"label":"5", "x":19.5, "y":3.5}, @@ -405,7 +405,6 @@ {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, - {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, @@ -424,6 +423,7 @@ {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, diff --git a/keyboards/maartenwut/wasdat_code/config.h b/keyboards/maartenwut/wasdat_code/config.h index 724488a994..16d5acd9c4 100644 --- a/keyboards/maartenwut/wasdat_code/config.h +++ b/keyboards/maartenwut/wasdat_code/config.h @@ -21,7 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* USB Device descriptor parameter */ #define VENDOR_ID 0x4705 -#define PRODUCT_ID 0xC574 +#define PRODUCT_ID 0xB00E #define DEVICE_VER 0x0001 #define MANUFACTURER Maartenwut #define PRODUCT Wasdat Code @@ -60,7 +60,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING -#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_LEVELS 5 // #define RGB_DI_PIN E2 // #ifdef RGB_DI_PIN @@ -254,3 +254,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 2 #define BOOTMAGIC_LITE_COLUMN 3 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/maartenwut/wasdat_code/keymaps/via/keymap.c b/keyboards/maartenwut/wasdat_code/keymaps/via/keymap.c new file mode 100644 index 0000000000..c3155c1e72 --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2019 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, KC_P4, KC_P5, KC_P6, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT + ), + [1] = LAYOUT_all( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_TOGG, _______, _______, KC_MUTE, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/maartenwut/wasdat_code/keymaps/via/rules.mk b/keyboards/maartenwut/wasdat_code/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/maartenwut/wasdat_code/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/maartenwut/wasdat_code/wasdat_code.h b/keyboards/maartenwut/wasdat_code/wasdat_code.h index 1f7b24de05..5b3ed20913 100644 --- a/keyboards/maartenwut/wasdat_code/wasdat_code.h +++ b/keyboards/maartenwut/wasdat_code/wasdat_code.h @@ -27,6 +27,9 @@ * The second converts the arguments into a two-dimensional array which * represents the switch matrix. */ + +#define LAYOUT_all LAYOUT_fullsize_iso + #define LAYOUT_fullsize_ansi( \ k05, k64, k62, k22, k02, k31, k0c, k2f, k6f, k6b, k3b, k0b, k5b, k33, k43, k41, \ k65, k35, k34, k32, k30, k60, k6a, k3a, k3c, k3f, k3d, k6d, k6c, k2b, k67, k6e, k66, k78, k77, k76, k56, \ diff --git a/keyboards/sirius/uni660/info.json b/keyboards/sirius/uni660/info.json deleted file mode 100644 index 296626d06a..0000000000 --- a/keyboards/sirius/uni660/info.json +++ /dev/null @@ -1,12 +0,0 @@ -{ - "keyboard_name": "Uni660", - "url": "", - "maintainer": "qmk", - "width": 12, - "height": 5.75, - "layouts": { - "LAYOUT": { - "layout": [{"x":0, "y":0.75}, {"x":1, "y":0.25}, {"x":2, "y":0}, {"x":3, "y":0.25}, {"x":4, "y":0.125}, {"x":7, "y":0.125}, {"x":8, "y":0.25}, {"x":9, "y":0}, {"x":10, "y":0.25}, {"x":11, "y":0.75}, {"x":0, "y":1.75}, {"x":1, "y":1.25}, {"x":2, "y":1}, {"x":3, "y":1.25}, {"x":4, "y":1.125}, {"x":7, "y":1.125}, {"x":8, "y":1.25}, {"x":9, "y":1}, {"x":10, "y":1.25}, {"x":11, "y":1.75}, {"x":0, "y":2.75}, {"x":1, "y":2.25}, {"x":2, "y":2}, {"x":3, "y":2.25}, {"x":4, "y":2.125}, {"x":7, "y":2.125}, {"x":8, "y":2.25}, {"x":9, "y":2}, {"x":10, "y":2.25}, {"x":11, "y":2.75}, {"x":1.5, "y":3.75}, {"x":2.5, "y":3.75}, {"x":3.5, "y":3.75}, {"x":4.5, "y":3.75}, {"x":6.5, "y":3.75}, {"x":7.5, "y":3.75}, {"x":8.5, "y":3.75}, {"x":9.5, "y":3.75}, {"x":1.5, "y":4.75}, {"x":2.5, "y":4.75}, {"x":3.5, "y":4.75}, {"x":4.5, "y":4.75}, {"x":6.5, "y":4.75}, {"x":7.5, "y":4.75}, {"x":8.5, "y":4.75}, {"x":9.5, "y":4.75}] - } - } -} diff --git a/keyboards/sirius/uni660/readme.md b/keyboards/sirius/uni660/readme.md index c3d2dbc1b3..4a45c6276f 100644 --- a/keyboards/sirius/uni660/readme.md +++ b/keyboards/sirius/uni660/readme.md @@ -6,7 +6,11 @@ Join the KeyCommerce [Discord](https://discord.gg/GJ8bdM) Make example: - make sirius/uni660:default +``` +qmk compile -kb sirius/uni660/rev1 -km default +qmk compile -kb sirius/uni660/rev2/ansi -km default +qmk compile -kb sirius/uni660/rev2/iso -km default +``` See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sirius/uni660/config.h b/keyboards/sirius/uni660/rev1/config.h index 06f1c78100..06f1c78100 100644 --- a/keyboards/sirius/uni660/config.h +++ b/keyboards/sirius/uni660/rev1/config.h diff --git a/keyboards/sirius/uni660/rev1/info.json b/keyboards/sirius/uni660/rev1/info.json new file mode 100644 index 0000000000..aa6b01cdf0 --- /dev/null +++ b/keyboards/sirius/uni660/rev1/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Uni660", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.5, "y":0}, {"label":"!", "x":2.5, "y":0}, {"label":"@", "x":3.5, "y":0}, {"label":"#", "x":4.5, "y":0}, {"label":"$", "x":5.5, "y":0}, {"label":"%", "x":6.5, "y":0}, {"label":"^", "x":7.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":2}, {"label":"Insert", "x":18, "y":0}, {"label":"F1", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1}, {"label":"|", "x":16, "y":1, "w":1.5}, {"label":"Delete", "x":18, "y":1}, {"label":"F2", "x":0, "y":2}, {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, {"label":"S", "x":4.25, "y":2}, {"label":"D", "x":5.25, "y":2}, {"label":"F", "x":6.25, "y":2}, {"label":"G", "x":7.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"\"", "x":14.25, "y":2}, {"label":"Enter", "x":15.25, "y":2, "w":2.25}, {"label":"F3", "x":0, "y":3}, {"label":"Shift", "x":1.5, "y":3, "w":2.25}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, {"label":"C", "x":5.75, "y":3}, {"label":"V", "x":6.75, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":2.25}, {"label":"Up", "x":17, "y":3}, {"label":"F4", "x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Win", "x":2.75, "y":4, "w":1.25}, {"label":"Alt", "x":4, "y":4, "w":1.25}, {"x":5.25, "y":4, "w":2.25}, {"label":"Fn", "x":7.5, "y":4}, {"x":9.5, "y":4, "w":2.75}, {"label":"Alt", "x":12.25, "y":4, "w":1.25}, {"label":"Menu", "x":13.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":14.75, "y":4, "w":1.25}, {"label":"Left", "x":16, "y":4}, {"label":"Down", "x":17, "y":4}, {"label":"Right", "x":18, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/sirius/uni660/keymaps/default/keymap.c b/keyboards/sirius/uni660/rev1/keymaps/default/keymap.c index 336aa84108..336aa84108 100644 --- a/keyboards/sirius/uni660/keymaps/default/keymap.c +++ b/keyboards/sirius/uni660/rev1/keymaps/default/keymap.c diff --git a/keyboards/sirius/uni660/keymaps/via/keymap.c b/keyboards/sirius/uni660/rev1/keymaps/via/keymap.c index 61bac7e4d5..61bac7e4d5 100644 --- a/keyboards/sirius/uni660/keymaps/via/keymap.c +++ b/keyboards/sirius/uni660/rev1/keymaps/via/keymap.c diff --git a/keyboards/sirius/uni660/rev1/keymaps/via/rules.mk b/keyboards/sirius/uni660/rev1/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/sirius/uni660/rev1/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/sirius/uni660/rev1/rev1.h b/keyboards/sirius/uni660/rev1/rev1.h new file mode 100644 index 0000000000..22397b48b1 --- /dev/null +++ b/keyboards/sirius/uni660/rev1/rev1.h @@ -0,0 +1,23 @@ +#pragma once + +#include "uni660.h" + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k46, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k3f,\ + k10, k11, k12, k13, k14, k15, k16, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k2f,\ + k20, k21, k22, k23, k24, k25, k26, k28, k29, k2a, k2b, k2c, k2d, k2e,\ + k30, k31, k32, k33, k34, k35, k36, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k48, k49, k4a, k4c, k4d, k4e, k4f \ +) \ + { \ + { k00, k01, k02, k03, k04, k05, k06, KC_NO, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, KC_NO, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, KC_NO, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d, k4e, k4f } \ + } diff --git a/keyboards/sirius/uni660/rev1/rules.mk b/keyboards/sirius/uni660/rev1/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/sirius/uni660/rev1/rules.mk diff --git a/keyboards/sirius/uni660/rev2/ansi/ansi.h b/keyboards/sirius/uni660/rev2/ansi/ansi.h new file mode 100644 index 0000000000..3e21b5c843 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/ansi.h @@ -0,0 +1,24 @@ +#pragma once + +#include "uni660.h" + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k46, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k3f,\ + k10, k11, k12, k13, k14, k15, k16, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k2f,\ + k20, k21, k22, k23, k24, k25, k26, k28, k29, k2a, k2b, k2c, k2d, k2e,\ + k30, k31, k32, k33, k34, k35, k36, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k48, k49, k4a, k4c, k4d, k4e, k4f \ +) \ + { \ + { k00, k01, k02, k03, k04, k05, k06, KC_NO, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, KC_NO, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, KC_NO, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d, k4e, k4f } \ + } diff --git a/keyboards/sirius/uni660/rev2/ansi/config.h b/keyboards/sirius/uni660/rev2/ansi/config.h new file mode 100644 index 0000000000..0032f61ccd --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0x5352 // "SR" +#define PRODUCT_ID 0x0202 // Second Product Second Version +#define DEVICE_VER 0x2004 // 2020.12 +#define MANUFACTURER SiRius +#define PRODUCT SiRius Uni660 V2 +#define DESCRIPTION SiRius Uni660 V2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +#define ONESHOT_TIMEOUT 500 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +//UART settings for communication with the RF microcontroller +#define SERIAL_UART_BAUD 1000000 +#define SERIAL_UART_DATA UDR1 +#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) +#define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX and RX */ \ + UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + } while(0) + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev2/ansi/info.json b/keyboards/sirius/uni660/rev2/ansi/info.json new file mode 100644 index 0000000000..08d21d0775 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Uni660", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 5, + "layouts": { + "LAYOUT_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"~", "x":1.5, "y":0}, {"label":"!", "x":2.5, "y":0}, {"label":"@", "x":3.5, "y":0}, {"label":"#", "x":4.5, "y":0}, {"label":"$", "x":5.5, "y":0}, {"label":"%", "x":6.5, "y":0}, {"label":"^", "x":7.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":2}, {"label":"Insert", "x":18, "y":0}, {"label":"F1", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1}, {"label":"|", "x":16, "y":1, "w":1.5}, {"label":"Delete", "x":18, "y":1}, {"label":"F2", "x":0, "y":2}, {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, {"label":"S", "x":4.25, "y":2}, {"label":"D", "x":5.25, "y":2}, {"label":"F", "x":6.25, "y":2}, {"label":"G", "x":7.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"\"", "x":14.25, "y":2}, {"label":"Enter", "x":15.25, "y":2, "w":2.25}, {"label":"F3", "x":0, "y":3}, {"label":"Shift", "x":1.5, "y":3, "w":2.25}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, {"label":"C", "x":5.75, "y":3}, {"label":"V", "x":6.75, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":2.25}, {"label":"Up", "x":17, "y":3}, {"label":"F4", "x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Win", "x":2.75, "y":4, "w":1.25}, {"label":"Alt", "x":4, "y":4, "w":1.25}, {"x":5.25, "y":4, "w":2.25}, {"label":"Fn", "x":7.5, "y":4}, {"x":9.5, "y":4, "w":2.75}, {"label":"Alt", "x":12.25, "y":4, "w":1.25}, {"label":"Menu", "x":13.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":14.75, "y":4, "w":1.25}, {"label":"Left", "x":16, "y":4}, {"label":"Down", "x":17, "y":4}, {"label":"Right", "x":18, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/sirius/uni660/rev2/ansi/keymaps/default/keymap.c b/keyboards/sirius/uni660/rev2/ansi/keymaps/default/keymap.c new file mode 100644 index 0000000000..ff45e7f2b7 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ansi( /* Base */ +KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, +KC_F1, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, +KC_F3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, +KC_F4, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_DEL, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), +}; diff --git a/keyboards/sirius/uni660/rev2/ansi/keymaps/via/keymap.c b/keyboards/sirius/uni660/rev2/ansi/keymaps/via/keymap.c new file mode 100644 index 0000000000..26ec43d478 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/keymaps/via/keymap.c @@ -0,0 +1,35 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ansi( /* Base */ +KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, +KC_F1, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, +KC_F3, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, +KC_F4, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_DEL, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), + +[1] = LAYOUT_ansi( /* Layer 1 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +[2] = LAYOUT_ansi( /* Layer 2 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +[3] = LAYOUT_ansi( /* Layer 3 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), +}; diff --git a/keyboards/sirius/uni660/rev2/ansi/keymaps/via/rules.mk b/keyboards/sirius/uni660/rev2/ansi/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/sirius/uni660/rev2/ansi/rules.mk b/keyboards/sirius/uni660/rev2/ansi/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/ansi/rules.mk diff --git a/keyboards/sirius/uni660/rev2/iso/config.h b/keyboards/sirius/uni660/rev2/iso/config.h new file mode 100644 index 0000000000..e31f8fb8eb --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/config.h @@ -0,0 +1,78 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0x5352 // "SR" +#define PRODUCT_ID 0x0203 // Second Product Third Version +#define DEVICE_VER 0x2004 // 2020.12 +#define MANUFACTURER SiRius +#define PRODUCT SiRius Uni660 V2 +#define DESCRIPTION SiRius Uni660 V2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +#define ONESHOT_TIMEOUT 500 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +//UART settings for communication with the RF microcontroller +#define SERIAL_UART_BAUD 1000000 +#define SERIAL_UART_DATA UDR1 +#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) +#define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX and RX */ \ + UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + } while(0) + +#define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev2/iso/info.json b/keyboards/sirius/uni660/rev2/iso/info.json new file mode 100644 index 0000000000..cd32c73690 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Uni660", + "url": "", + "maintainer": "qmk", + "width": 19, + "height": 5, + "layouts": { + "LAYOUT_iso": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"\u00ac", "x":1.5, "y":0}, {"label":"!", "x":2.5, "y":0}, {"label":"\"", "x":3.5, "y":0}, {"label":"\u00a3", "x":4.5, "y":0}, {"label":"$", "x":5.5, "y":0}, {"label":"%", "x":6.5, "y":0}, {"label":"^", "x":7.5, "y":0}, {"label":"&", "x":9.5, "y":0}, {"label":"*", "x":10.5, "y":0}, {"label":"(", "x":11.5, "y":0}, {"label":")", "x":12.5, "y":0}, {"label":"_", "x":13.5, "y":0}, {"label":"+", "x":14.5, "y":0}, {"label":"Backspace", "x":15.5, "y":0, "w":2}, {"label":"Insert", "x":18, "y":0}, {"label":"F1", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, {"label":"E", "x":5, "y":1}, {"label":"R", "x":6, "y":1}, {"label":"T", "x":7, "y":1}, {"label":"Y", "x":9, "y":1}, {"label":"U", "x":10, "y":1}, {"label":"I", "x":11, "y":1}, {"label":"O", "x":12, "y":1}, {"label":"P", "x":13, "y":1}, {"label":"{", "x":14, "y":1}, {"label":"}", "x":15, "y":1}, {"label":"Enter", "x":16.25, "y":1, "w":1.25, "h":2}, {"label":"Delete", "x":18, "y":1}, {"label":"F2", "x":0, "y":2}, {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, {"label":"S", "x":4.25, "y":2}, {"label":"D", "x":5.25, "y":2}, {"label":"F", "x":6.25, "y":2}, {"label":"G", "x":7.25, "y":2}, {"label":"H", "x":9.25, "y":2}, {"label":"J", "x":10.25, "y":2}, {"label":"K", "x":11.25, "y":2}, {"label":"L", "x":12.25, "y":2}, {"label":":", "x":13.25, "y":2}, {"label":"@", "x":14.25, "y":2}, {"label":"~", "x":15.25, "y":2}, {"label":"F3", "x":0, "y":3}, {"label":"Shift", "x":1.5, "y":3, "w":1.25}, {"label":"|", "x":2.75, "y":3}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, {"label":"C", "x":5.75, "y":3}, {"label":"V", "x":6.75, "y":3}, {"label":"B", "x":7.75, "y":3}, {"label":"N", "x":9.75, "y":3}, {"label":"M", "x":10.75, "y":3}, {"label":"<", "x":11.75, "y":3}, {"label":">", "x":12.75, "y":3}, {"label":"?", "x":13.75, "y":3}, {"label":"Shift", "x":14.75, "y":3, "w":2.25}, {"label":"Up", "x":17, "y":3}, {"label":"F4", "x":0, "y":4}, {"label":"Ctrl", "x":1.5, "y":4, "w":1.25}, {"label":"Win", "x":2.75, "y":4, "w":1.25}, {"label":"Alt", "x":4, "y":4, "w":1.25}, {"x":5.25, "y":4, "w":2.25}, {"label":"Fn", "x":7.5, "y":4}, {"x":9.5, "y":4, "w":2.75}, {"label":"Alt", "x":12.25, "y":4, "w":1.25}, {"label":"Menu", "x":13.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":14.75, "y":4, "w":1.25}, {"label":"Left", "x":16, "y":4}, {"label":"Down", "x":17, "y":4}, {"label":"Right", "x":18, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/sirius/uni660/rev2/iso/iso.h b/keyboards/sirius/uni660/rev2/iso/iso.h new file mode 100644 index 0000000000..b38bdfc932 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/iso.h @@ -0,0 +1,24 @@ +#pragma once + +#include "uni660.h" + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k46, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k3f,\ + k10, k11, k12, k13, k14, k15, k16, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k2f,\ + k20, k21, k22, k23, k24, k25, k26, k28, k29, k2a, k2b, k2c, k2d, k2e,\ + k30, k31, k37, k32, k33, k34, k35, k36, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k43, k44, k45, k48, k49, k4a, k4c, k4d, k4e, k4f \ +) \ + { \ + { k00, k01, k02, k03, k04, k05, k06, KC_NO, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ + { k10, k11, k12, k13, k14, k15, k16, KC_NO, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ + { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \ + { k40, k41, k42, k43, k44, k45, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d, k4e, k4f } \ + } diff --git a/keyboards/sirius/uni660/rev2/iso/keymaps/default/keymap.c b/keyboards/sirius/uni660/rev2/iso/keymaps/default/keymap.c new file mode 100644 index 0000000000..de8630eaa6 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/keymaps/default/keymap.c @@ -0,0 +1,11 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_iso( /* Base */ +KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, +KC_F1, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, +KC_F3, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, +KC_F4, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_DEL, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), +}; diff --git a/keyboards/sirius/uni660/rev2/iso/keymaps/via/keymap.c b/keyboards/sirius/uni660/rev2/iso/keymaps/via/keymap.c new file mode 100644 index 0000000000..ac1d7c6d59 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/keymaps/via/keymap.c @@ -0,0 +1,35 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_iso( /* Base */ +KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, +KC_F1, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, +KC_F2, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, +KC_F3, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, +KC_F4, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_DEL, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), + +[1] = LAYOUT_iso( /* Layer 1 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +[2] = LAYOUT_iso( /* Layer 2 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), + +[3] = LAYOUT_iso( /* Layer 3 */ +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RGUI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), +}; diff --git a/keyboards/sirius/uni660/rev2/iso/keymaps/via/rules.mk b/keyboards/sirius/uni660/rev2/iso/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/sirius/uni660/rev2/iso/rules.mk b/keyboards/sirius/uni660/rev2/iso/rules.mk new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/keyboards/sirius/uni660/rev2/iso/rules.mk diff --git a/keyboards/sirius/uni660/rules.mk b/keyboards/sirius/uni660/rules.mk index 920d8a83dd..243916fa76 100644 --- a/keyboards/sirius/uni660/rules.mk +++ b/keyboards/sirius/uni660/rules.mk @@ -30,3 +30,4 @@ UNICODE_ENABLE = yes # Unicode # project specific files SRC += matrix.c + diff --git a/keyboards/sirius/uni660/uni660.h b/keyboards/sirius/uni660/uni660.h index 81743adbd8..75813db7bd 100644 --- a/keyboards/sirius/uni660/uni660.h +++ b/keyboards/sirius/uni660/uni660.h @@ -2,6 +2,14 @@ #include "quantum.h" +#ifdef KEYBOARD_sirius_uni660_rev1 + #include "rev1.h" +#elif KEYBOARD_sirius_uni660_rev2_iso + #include "iso.h" +#elif KEYBOARD_sirius_uni660_rev2_ansi + #include "ansi.h" +#endif + #define red_led_off writePinHigh(F5) #define red_led_on writePinLow(F5) #define blu_led_off writePinHigh(F4) @@ -41,21 +49,3 @@ #define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G) #define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G) */ - -// This a shortcut to help you visually see your layout. -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k46, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k3f,\ - k10, k11, k12, k13, k14, k15, k16, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k2f,\ - k20, k21, k22, k23, k24, k25, k26, k28, k29, k2a, k2b, k2c, k2d, k2e,\ - k30, k31, k32, k33, k34, k35, k36, k38, k39, k3a, k3b, k3c, k3d, k3e, \ - k40, k41, k42, k43, k44, k45, k48, k49, k4a, k4c, k4d, k4e, k4f \ -) \ - { \ - { k00, k01, k02, k03, k04, k05, k06, KC_NO, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f }, \ - { k10, k11, k12, k13, k14, k15, k16, KC_NO, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f }, \ - { k20, k21, k22, k23, k24, k25, k26, KC_NO, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f }, \ - { k30, k31, k32, k33, k34, k35, k36, KC_NO, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f }, \ - { k40, k41, k42, k43, k44, k45, k46, KC_NO, k48, k49, k4a, KC_NO, k4c, k4d, k4e, k4f } \ - } diff --git a/keyboards/wete/keymaps/via/config.h b/keyboards/wete/keymaps/via/config.h new file mode 100644 index 0000000000..4dadf6a169 --- /dev/null +++ b/keyboards/wete/keymaps/via/config.h @@ -0,0 +1 @@ +#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 2047 diff --git a/keyboards/wete/keymaps/via/keymap.c b/keyboards/wete/keymaps/via/keymap.c new file mode 100644 index 0000000000..0f1a0bedb1 --- /dev/null +++ b/keyboards/wete/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ansi_rhnp( + KC_INSERT, KC_PSCREEN, KC_PAUSE, KC_SLCK, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_KP_4, KC_KP_5, KC_KP_6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER, KC_PGUP, + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_KP_0, KC_KP_DOT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_ansi_rhnp( + KC_NO, KC_NO, KC_NO, KC_NO, BL_TOGG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RESET, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_INC, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, BL_OFF, BL_DEC, BL_ON + ), + [2] = LAYOUT_ansi_rhnp( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO + ), + [3] = LAYOUT_ansi_rhnp( + KC_NO, KC_NO, KC_NO, KC_NO, BL_TOGG, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO + ) +}; diff --git a/keyboards/wete/keymaps/via/rules.mk b/keyboards/wete/keymaps/via/rules.mk new file mode 100644 index 0000000000..ee1e4ceeb4 --- /dev/null +++ b/keyboards/wete/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +BOOTMAGIC_ENABLE = lite diff --git a/keyboards/wete/wete.h b/keyboards/wete/wete.h index e9f44e185d..46daf6d6f1 100644 --- a/keyboards/wete/wete.h +++ b/keyboards/wete/wete.h @@ -16,14 +16,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k30, k31, k32, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k50, k52, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k50, k52, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } // ANSI layout @@ -37,14 +37,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k51, k52, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k51, k52, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { XXX, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } // ANSI layout @@ -58,14 +58,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k50, k51, k52, k53, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k50, k51, k52, k53, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, XXX, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } @@ -82,14 +82,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k30, k31, k32, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k50, k52, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k50, k52, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { k50, XXX, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } // ISO layout @@ -104,14 +104,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k51, k52, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k51, k52, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { XXX, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { XXX, k51, k52, XXX, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } // ISO layout @@ -126,14 +126,14 @@ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, k2i, k2j, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, k3i, k3j, \ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, k4h, k4i, k4j, \ - k50, k51, k52, k53, k54, k55, k56, k5a, k5d, k5e, k5h, k5i, k5j \ + k50, k51, k52, k53, k54, k55, k56, k5a, k5d, k5f, k5h, k5i, k5j \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, XXX, k0a, k0b, k0c, k0d, XXX, k0f, k0g, k0h, k0i, k0j }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, XXX, k1j }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k2e, k2f, k2g, XXX, k2i, k2j }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, k3f, XXX, XXX, k3i, k3j }, \ { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b, k4c, k4d, k4e, k4f, XXX, k4h, k4i, k4j }, \ - { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, k5e, XXX, XXX, k5h, k5i, k5j } \ + { k50, k51, k52, k53, k54, k55, k56, XXX, XXX, XXX, k5a, XXX, XXX, k5d, XXX, k5f, XXX, k5h, k5i, k5j } \ } //////////////////////////////// JIS //////////////////////////////// diff --git a/keyboards/yd60mq/info.json b/keyboards/yd60mq/info.json index 816d653bce..60a62af7aa 100644 --- a/keyboards/yd60mq/info.json +++ b/keyboards/yd60mq/info.json @@ -144,6 +144,77 @@ {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25} ] + }, + "LAYOUT_60_iso": { + "key_count": 62, + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] } } } diff --git a/keyboards/yd60mq/keymaps/iso/keymap.c b/keyboards/yd60mq/keymaps/iso/keymap.c new file mode 100644 index 0000000000..9a4debed77 --- /dev/null +++ b/keyboards/yd60mq/keymaps/iso/keymap.c @@ -0,0 +1,28 @@ +#include QMK_KEYBOARD_H + +enum layer_names { + _BL, + _FL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + //,: Base Layer + [0] = LAYOUT_60_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, LT(1,KC_RGHT) + ), + + //,: Function Layer + [1] = LAYOUT_60_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + XXXXXXX, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, XXXXXXX, XXXXXXX, XXXXXXX, KC_UP, XXXXXXX, KC_PGUP, KC_HOME, KC_PSCR, + KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, RGB_HUI, RGB_SAI, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_END, XXXXXXX, KC_MNXT, + KC_TRNS, RGB_MOD, RGB_RMOD, RGB_VAI, RGB_VAD, RGB_HUD, RGB_SAD, XXXXXXX, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, + KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_SPI, RGB_SPD, XXXXXXX, KC_TRNS + ) + +};
\ No newline at end of file diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk index 98b13aca43..6619c187f4 100644 --- a/keyboards/yd60mq/rules.mk +++ b/keyboards/yd60mq/rules.mk @@ -31,6 +31,6 @@ AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches HD44780_ENABLE = no # Enable support for HD44780 based LCDs -LAYOUTS = 60_ansi +LAYOUTS = 60_ansi 60_iso DEFAULT_FOLDER = yd60mq/12led diff --git a/keyboards/yd60mq/yd60mq.h b/keyboards/yd60mq/yd60mq.h index 0f6fde9657..6b3824baa3 100644 --- a/keyboards/yd60mq/yd60mq.h +++ b/keyboards/yd60mq/yd60mq.h @@ -30,4 +30,19 @@ { K40, K41, K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C, K4D, KC_NO } \ } +#define LAYOUT_60_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K1d, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3d, \ + K40, K41, K42, K47, K49, K4A, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, KC_NO, }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, K1d }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, KC_NO, K3d, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, KC_NO, K47, KC_NO, K49, K4A, KC_NO, K4C, K4D, KC_NO } \ +} + + #define LAYOUT LAYOUT_all diff --git a/layouts/default/65_ansi_blocker_split_bs/default_65_ansi_blocker_split_bs/keymap.c b/layouts/default/65_ansi_blocker_split_bs/default_65_ansi_blocker_split_bs/keymap.c new file mode 100644 index 0000000000..34e10d5470 --- /dev/null +++ b/layouts/default/65_ansi_blocker_split_bs/default_65_ansi_blocker_split_bs/keymap.c @@ -0,0 +1,24 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bsp│Bsp│Hom│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │PgU│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │PgD│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ ↑ │End│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │Ctrl│GUI │Alt │ │ Alt│Ctrl│ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + [0] = LAYOUT_65_ansi_blocker_split_bs( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ) +}; diff --git a/layouts/default/65_ansi_blocker_split_bs/info.json b/layouts/default/65_ansi_blocker_split_bs/info.json new file mode 100644 index 0000000000..a388086b1e --- /dev/null +++ b/layouts/default/65_ansi_blocker_split_bs/info.json @@ -0,0 +1,85 @@ +{ + "keyboard_name": "65% ANSI layout with blocker and split Backspace", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_65_ansi_blocker_split_bs": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + {"x":15, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + {"x":15, "y":2}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":13, "y":4}, + {"x":14, "y":4}, + {"x":15, "y":4} + ] + } + } +} diff --git a/layouts/default/65_ansi_blocker_split_bs/layout.json b/layouts/default/65_ansi_blocker_split_bs/layout.json new file mode 100644 index 0000000000..93486ce97d --- /dev/null +++ b/layouts/default/65_ansi_blocker_split_bs/layout.json @@ -0,0 +1,5 @@ +[{a:7},"","","","","","","","","","","","","","","",""], +[{w:1.5},"","","","","","","","","","","","","",{w:1.5},"",""], +[{w:1.75},"","","","","","","","","","","","",{w:2.25},"",""], +[{w:2.25},"","","","","","","","","","","",{w:1.75},"","",""], +[{w:1.25},"",{w:1.25},"",{w:1.25},"",{w:6.25},"",{w:1.25},"",{w:1.25},"",{x:0.5},"","",""] diff --git a/layouts/default/65_ansi_blocker_split_bs/readme.md b/layouts/default/65_ansi_blocker_split_bs/readme.md new file mode 100644 index 0000000000..7c49f42b95 --- /dev/null +++ b/layouts/default/65_ansi_blocker_split_bs/readme.md @@ -0,0 +1,5 @@ +# 65_ansi_blocker_split_bs + + LAYOUT_65_ansi_blocker_split_bs + +This is the 65% ANSI layout with a blocker next to the arrows and split Backspace. diff --git a/layouts/default/65_ansi_blocker_tsangan/default_65_ansi_blocker_tsangan/keymap.c b/layouts/default/65_ansi_blocker_tsangan/default_65_ansi_blocker_tsangan/keymap.c new file mode 100644 index 0000000000..ed7cec1e17 --- /dev/null +++ b/layouts/default/65_ansi_blocker_tsangan/default_65_ansi_blocker_tsangan/keymap.c @@ -0,0 +1,24 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│Hom│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │PgU│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │PgD│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ ↑ │End│ + * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬─┬───┼───┼───┤ + * │Ctrl │GUI│Alt │ │ Alt│ │ ← │ ↓ │ → │ + * └─────┴───┴─────┴───────────────────────────┴─────┘ └───┴───┴───┘ + */ + [0] = LAYOUT_65_ansi_blocker_tsangan( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ) +}; diff --git a/layouts/default/65_ansi_blocker_tsangan/info.json b/layouts/default/65_ansi_blocker_tsangan/info.json new file mode 100644 index 0000000000..cec0ca8134 --- /dev/null +++ b/layouts/default/65_ansi_blocker_tsangan/info.json @@ -0,0 +1,83 @@ +{ + "keyboard_name": "65% ANSI Tsangan layout with blocker", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_65_ansi_blocker_tsangan": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + {"x":15, "y":2}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15, "y":3}, + + {"x":0, "y":4, "w":1.5}, + {"x":1.5, "y":4}, + {"x":2.5, "y":4, "w":1.5}, + {"x":4, "y":4, "w":7}, + {"x":11, "y":4, "w":1.5}, + {"x":13, "y":4}, + {"x":14, "y":4}, + {"x":15, "y":4} + ] + } + } +} diff --git a/layouts/default/65_ansi_blocker_tsangan/layout.json b/layouts/default/65_ansi_blocker_tsangan/layout.json new file mode 100644 index 0000000000..519b653852 --- /dev/null +++ b/layouts/default/65_ansi_blocker_tsangan/layout.json @@ -0,0 +1,5 @@ +[{a:7},"","","","","","","","","","","","","",{w:2},"",""], +[{w:1.5},"","","","","","","","","","","","","",{w:1.5},"",""], +[{w:1.75},"","","","","","","","","","","","",{w:2.25},"",""], +[{w:2.25},"","","","","","","","","","","",{w:1.75},"","",""], +[{w:1.5},"","",{w:1.5},"",{w:7},"",{w:1.5},"",{x:0.5},"","",""] diff --git a/layouts/default/65_ansi_blocker_tsangan/readme.md b/layouts/default/65_ansi_blocker_tsangan/readme.md new file mode 100644 index 0000000000..879742fee8 --- /dev/null +++ b/layouts/default/65_ansi_blocker_tsangan/readme.md @@ -0,0 +1,6 @@ +# 65_ansi_blocker_tsangan + + LAYOUT_65_ansi_blocker_tsangan + +This is a Tsangan-inspired 65% ANSI layout with a blocker next to the arrows and 1.5u-1u-1.5u-7u-1.5u bottom row. +
\ No newline at end of file diff --git a/util/linux_install.sh b/util/linux_install.sh index 9ef0641576..d30f786558 100755 --- a/util/linux_install.sh +++ b/util/linux_install.sh @@ -32,6 +32,7 @@ if grep ID /etc/os-release | grep -qE "fedora"; then avr-libc \ binutils-avr32-linux-gnu \ clang \ + avrdude \ dfu-util \ dfu-programmer \ diffutils \ @@ -67,6 +68,7 @@ elif grep ID /etc/os-release | grep -qE 'debian|ubuntu'; then gcc-avr \ git \ libnewlib-arm-none-eabi \ + avrdude \ libusb-dev \ python3 \ python3-pip \ @@ -110,6 +112,7 @@ elif grep ID /etc/os-release | grep -q gentoo; then app-arch/unzip \ app-arch/zip \ app-mobilephone/dfu-util \ + dev-embedded/dfu-programmer \ dev-embedded/avrdude \ net-misc/wget \ sys-devel/clang \ @@ -126,6 +129,7 @@ elif grep ID /etc/os-release | grep -q sabayon; then app-arch/unzip \ app-arch/zip \ app-mobilephone/dfu-util \ + dev-embedded/dfu-programmer \ dev-embedded/avrdude \ dev-lang/python \ net-misc/wget \ @@ -151,7 +155,8 @@ elif grep ID /etc/os-release | grep -qE "opensuse|tumbleweed"; then cross-avr-binutils \ cross-arm-none-newlib-devel \ cross-arm-binutils cross-arm-none-newlib-devel \ - dfu-tool \ + avrdude \ + dfu-util \ dfu-programmer \ gcc \ libusb-devel \ @@ -216,6 +221,7 @@ elif grep ID /etc/os-release | grep -q void; then avr-gcc \ avr-libc \ $CROSS_ARM \ + avrdude \ dfu-programmer \ dfu-util \ gcc \ |