diff options
36 files changed, 1607 insertions, 352 deletions
diff --git a/keyboards/emery65/config.h b/keyboards/emery65/config.h new file mode 100644 index 0000000000..cbe31b75da --- /dev/null +++ b/keyboards/emery65/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2021 Yiancar-Designs + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published byß +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x8968 +#define PRODUCT_ID 0x4536 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Yiancar-Designs +#define PRODUCT Emery65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define MATRIX_ROW_PINS { A2, B9, B8, B5, B4 } +#define MATRIX_COL_PINS { A1, B1, B0, A7, A6, A5, A4, A3, B2, B10, B11, B12, B13, B14, B15 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Ensure we jump to bootloader if the RESET keycode was pressed */ +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE + +/* Indicator LEDs */ +#define LED_CAPS_LOCK_PIN B6 +#define LED_PIN_ON_STATE 0 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/emery65/emery65.c b/keyboards/emery65/emery65.c new file mode 100644 index 0000000000..11cac7c462 --- /dev/null +++ b/keyboards/emery65/emery65.c @@ -0,0 +1,21 @@ +/* Copyright 2021 Yiancar-Designs + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + #include "emery65.h" + +void led_init_ports(void) { + // Set our LED pins as open drain outputs + palSetLineMode(LED_CAPS_LOCK_PIN, PAL_MODE_OUTPUT_OPENDRAIN); +} diff --git a/keyboards/emery65/emery65.h b/keyboards/emery65/emery65.h new file mode 100644 index 0000000000..5bffeaab81 --- /dev/null +++ b/keyboards/emery65/emery65.h @@ -0,0 +1,34 @@ +/* Copyright 2021 Yiancar-Designs + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#define XXX KC_NO + +#include "quantum.h" + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, K4E } \ +} diff --git a/keyboards/emery65/info.json b/keyboards/emery65/info.json new file mode 100644 index 0000000000..9d8058e831 --- /dev/null +++ b/keyboards/emery65/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "Emery65", + "url": "https://yiancar-designs.com", + "maintainer": "Yiancar-Designs", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} diff --git a/keyboards/emery65/keymaps/default/keymap.c b/keyboards/emery65/keymaps/default/keymap.c new file mode 100644 index 0000000000..332babc8c6 --- /dev/null +++ b/keyboards/emery65/keymaps/default/keymap.c @@ -0,0 +1,32 @@ +/* Copyright 2021 Yiancar-Designs + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_all( /* FN */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/emery65/keymaps/default/readme.md b/keyboards/emery65/keymaps/default/readme.md new file mode 100644 index 0000000000..25aae30244 --- /dev/null +++ b/keyboards/emery65/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The default keymap for Emery 65. + + + + diff --git a/keyboards/emery65/keymaps/via/keymap.c b/keyboards/emery65/keymaps/via/keymap.c new file mode 100644 index 0000000000..beeae2971b --- /dev/null +++ b/keyboards/emery65/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2021 Yiancar-Designs + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_all( /* FN */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[2] = LAYOUT_all( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[3] = LAYOUT_all( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/emery65/keymaps/via/readme.md b/keyboards/emery65/keymaps/via/readme.md new file mode 100644 index 0000000000..2e2bd04d19 --- /dev/null +++ b/keyboards/emery65/keymaps/via/readme.md @@ -0,0 +1,5 @@ +# The default keymap for Emery 65. VIA support enabled. + + + +
\ No newline at end of file diff --git a/keyboards/emery65/keymaps/via/rules.mk b/keyboards/emery65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/emery65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/emery65/readme.md b/keyboards/emery65/readme.md new file mode 100644 index 0000000000..4450be1046 --- /dev/null +++ b/keyboards/emery65/readme.md @@ -0,0 +1,32 @@ +# Emery 65 + +This is a standard 65% layout PCB. It supports VIA. + +* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar) +* Hardware Supported: A 65% keyboard with STM32F072CB +* Hardware Availability: https://geekhack.org/index.php?topic=112678.0 + +## Instructions + +### Build + +Make example for this keyboard (after setting up your build environment): + + make emery65:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +### Reset + +- Unplug +- Hold Escape +- Plug In +- Unplug +- Release Escape + +### Flash + +- Unplug +- Hold Escape +- Plug In +- Flash using QMK Toolbox or CLI (`make emery65:<keymap>:flash`) diff --git a/keyboards/emery65/rules.mk b/keyboards/emery65/rules.mk new file mode 100644 index 0000000000..853d4afb29 --- /dev/null +++ b/keyboards/emery65/rules.mk @@ -0,0 +1,29 @@ +# MCU name +MCU = STM32F072 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Wildcard to allow APM32 MCU +DFU_SUFFIX_ARGS = -v FFFF -p FFFF + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ffkeebs/puca/config.h b/keyboards/ffkeebs/puca/config.h new file mode 100644 index 0000000000..29bb9a782b --- /dev/null +++ b/keyboards/ffkeebs/puca/config.h @@ -0,0 +1,69 @@ +/* +Copyright 2021 Sleepdealer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4646 // FF +#define PRODUCT_ID 0x0002 +#define DEVICE_VER 0x0001 +#define MANUFACTURER FootFingers +#define PRODUCT Puca + +#define MATRIX_ROWS 6 +#define MATRIX_COLS 5 + // 0 , 1 , 2 , 3 , 4 , 5 +#define MATRIX_ROW_PINS { B4, E6, D7, B5, C6, F6} +#define MATRIX_COL_PINS { F7, B1, B3, B2, B6} + +#define DIODE_DIRECTION COL2ROW + +#ifdef RGBLIGHT_ENABLE + #define RGB_DI_PIN D4 + + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST + #define RGBLIGHT_EFFECT_ALTERNATING + #define RGBLIGHT_EFFECT_TWINKLE + #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT + #define RGBLED_NUM 8 +#endif + + +#define ENCODERS_PAD_A { F4 } +#define ENCODERS_PAD_B { F5 } + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + diff --git a/keyboards/ffkeebs/puca/info.json b/keyboards/ffkeebs/puca/info.json new file mode 100644 index 0000000000..0b5b957e63 --- /dev/null +++ b/keyboards/ffkeebs/puca/info.json @@ -0,0 +1,37 @@ +{ + "keyboard_name": "Puca", + "url": "https://ffkeebs.com/collections/puca/", + "maintainer": "Sleepdealr", + "layouts": { + "LAYOUT": { + "layout": [ + { "label": "Rotary", "x": 0.5, "y": 0 }, + { "label": "Pg Up", "x": 2, "y": 0 }, + { "label": "Pg Dn", "x": 3, "y": 0 }, + { "label": "Layer Toggle", "x": 0, "y": 1.25 }, + { "label": "/", "x": 1, "y": 1.25 }, + { "label": "*", "x": 2, "y": 1.25 }, + { "label": "-", "x": 3, "y": 1.25 }, + { "label": "7", "x": 0, "y": 2.25 }, + { "label": "8", "x": 1, "y": 2.25 }, + { "label": "9", "x": 2, "y": 2.25 }, + { "label": "+", "x": 3, "y": 2.25, "h": 2 }, + { "label": "+", "x": 4, "y": 2.25 }, + { "label": "4", "x": 0, "y": 3.25 }, + { "label": "5", "x": 1, "y": 3.25 }, + { "label": "6", "x": 2, "y": 3.25 }, + { "label": "|", "x": 4, "y": 3.25 }, + { "label": "1", "x": 0, "y": 4.25 }, + { "label": "2", "x": 1, "y": 4.25 }, + { "label": "3", "x": 2, "y": 4.25 }, + { "label": "Enter", "x": 3, "y": 4.25, "h": 2 }, + { "label": "Enter", "x": 4, "y": 4.25 }, + { "label": "0", "x": 0, "y": 5.25, "w": 2 }, + { "label": ".", "x": 2, "y": 5.25 }, + { "label": ".", "x": 4, "y": 5.25 }, + { "label": "0", "x": 0, "y": 6.25 }, + { "label": "00", "x": 1, "y": 6.25 } + ] + } + } +} diff --git a/keyboards/ffkeebs/puca/keymaps/default/keymap.c b/keyboards/ffkeebs/puca/keymaps/default/keymap.c new file mode 100644 index 0000000000..fb8a6bc7c1 --- /dev/null +++ b/keyboards/ffkeebs/puca/keymaps/default/keymap.c @@ -0,0 +1,52 @@ +/* Copyright 2021 Sleepdealer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// 00 Functionality +enum custom_keycodes { + MC_00 = SAFE_RANGE, +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case MC_00: + if (record->event.pressed) { + SEND_STRING("00"); + } + break; + } + return true; +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( + KC_MUTE, KC_PGUP, KC_PGDN, + TG(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PIPE, + KC_P1, KC_P2, KC_P3, KC_ENTER, KC_ENTER, + KC_P0, MC_00, KC_PDOT, KC_PDOT, + KC_P0), + LAYOUT( + KC_TRNS, RGB_HUI, RGB_VAI, + TG(1), RGB_TOG, RGB_HUD, RGB_VAD, + KC_PGUP, KC_UP, KC_PGDN, RGB_MOD, RGB_MOD, + KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_INS, KC_HOME, KC_END, RGB_RMOD, RGB_RMOD, + KC_ESC, KC_TRNS, KC_DEL, KC_TRNS, + KC_ESC) +}; diff --git a/keyboards/ffkeebs/puca/puca.c b/keyboards/ffkeebs/puca/puca.c new file mode 100644 index 0000000000..e08ac0cb3b --- /dev/null +++ b/keyboards/ffkeebs/puca/puca.c @@ -0,0 +1,133 @@ +/* Copyright 2021 Sleepdealer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "puca.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (clockwise) { + tap_code_delay(KC_VOLU, 10); // Right + } else { + tap_code_delay(KC_VOLD, 10); // Left + } + return false; +} + + +// OLED +#ifdef OLED_ENABLE +__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } +__attribute__((weak)) void oled_task_user(void) { +// WPM-responsive animation stuff here +# define IDLE_FRAMES 2 +# define ANIM_FRAME_DURATION 400 // how long each frame lasts in ms +// #define SLEEP_TIMER 60000 // should sleep after this period of 0 wpm, needs fixing +# define ANIM_SIZE 636 // number of bytes in array, minimize for adequate firmware size, max is 1024 + static uint32_t anim_timer = 0; + static uint8_t current_idle_frame = 0; + // Credit to u/Pop-X- for the initial code. You can find his commit here https://github.com/qmk/qmk_firmware/pull/9264/files#diff-303f6e3a7a5ee54be0a9a13630842956R196-R333. + static const char PROGMEM idle[IDLE_FRAMES][ANIM_SIZE] = {{ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x60, 0x60, 0x18, 0x18, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, + 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x18, 0x18, 0x60, 0x60, 0x80, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x0c, 0x0c, 0x0c, 0x0c, + 0x0c, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x06, 0x06, 0x18, 0x18, 0x60, 0x60, 0x18, 0x18, 0x60, 0x60, + 0x80, 0x80, 0x60, 0x60, 0x80, 0x80, 0x60, 0x60, 0x18, 0x18, 0x06, 0x07, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + },{ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfc, 0x03, 0x03, 0x00, 0x00, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0xfc, 0xfc, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x60, 0x60, 0x60, 0x60, + 0x60, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x30, 0x30, 0xc0, 0xc0, 0x00, 0x00, 0xc0, 0xc0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x30, 0x3f, 0x0f, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x00, 0x03, 0x03, + 0x0c, 0x0c, 0x03, 0x03, 0x0c, 0x0c, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }}; + + void animation_phase(void) { + current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES; + oled_write_raw_P(idle[abs((IDLE_FRAMES - 1) - current_idle_frame)], ANIM_SIZE); + } + if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + anim_timer = timer_read32(); + animation_phase(); + } + + oled_set_cursor(0, 6); + oled_write_P(PSTR("PUCA\nPAD\n"), false); + oled_write_P(PSTR("-----\n"), false); + // Host Keyboard Layer Status + oled_write_P(PSTR("MODE\n"), false); + oled_write_P(PSTR("\n"), false); + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("BASE\n"), false); + break; + case 1: + oled_write_P(PSTR("FUNC\n"), false); + break; + } +} +#endif
\ No newline at end of file diff --git a/keyboards/ffkeebs/puca/puca.h b/keyboards/ffkeebs/puca/puca.h new file mode 100644 index 0000000000..bc17c9f36f --- /dev/null +++ b/keyboards/ffkeebs/puca/puca.h @@ -0,0 +1,41 @@ +/* Copyright 2021 Sleepdealer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// K24 is 2U Plus +// K44 is 2u Enter +// K54 is 2u 0 + + +#include "quantum.h" + +#define LAYOUT( \ + K00, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, K24,\ + K30, K31, K32, K33, \ + K40, K41, K42, K43, K44,\ + K50, K51, K52, K53, \ + K54 \ +) { \ + { K00, KC_NO, K02, K03, KC_NO }, \ + { K10, K11, K12, K13, KC_NO }, \ + { K20, K21, K22, K23, K24 }, \ + { K30, K31, K32, K33, KC_NO }, \ + { K40, K41, K42, K43, K44 }, \ + { K50, K51, K52, K53, K54 }, \ +} diff --git a/keyboards/ffkeebs/puca/readme.md b/keyboards/ffkeebs/puca/readme.md new file mode 100644 index 0000000000..ff0b2c49ae --- /dev/null +++ b/keyboards/ffkeebs/puca/readme.md @@ -0,0 +1,23 @@ +# Puca Pad + +* Keyboard Maintainer: [Sleepdealer](https://github.com/Sleepdealr) +* Hardware Supported: Puca Pad +* Hardware Availability: Puca GB + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the encoder) +* **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for this keyboard (after setting up your build environment): + + make ffkeebs/puca:default + +Flashing example for this keyboard: + + make ffkeebs/puca:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ffkeebs/puca/rules.mk b/keyboards/ffkeebs/puca/rules.mk new file mode 100644 index 0000000000..b27ecc458b --- /dev/null +++ b/keyboards/ffkeebs/puca/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow + +ENCODER_ENABLE = yes #Rotary encoder + +OLED_ENABLE = yes #OLED +LTO_ENABLE = yes # Enable Link Time Optimization to reduce firmware size diff --git a/keyboards/xelus/pachi/readme.md b/keyboards/xelus/pachi/readme.md index 4f40465672..d6a0aec88b 100644 --- a/keyboards/xelus/pachi/readme.md +++ b/keyboards/xelus/pachi/readme.md @@ -9,6 +9,7 @@ Make example for this keyboard (after setting up your build environment): make xelus/pachi/rev1:default make xelus/pachi/mini_32u4:default - make xelus/pachi/rgb:default + make xelus/pachi/rgb/rev1:default + make xelus/pachi/rgb/rev2:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/xelus/pachi/rgb/config.h b/keyboards/xelus/pachi/rgb/config.h index ee937119ba..956d35d69b 100644 --- a/keyboards/xelus/pachi/rgb/config.h +++ b/keyboards/xelus/pachi/rgb/config.h @@ -14,110 +14,4 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x5845 // "XE" -#define PRODUCT_ID 0x5052 // "PR" -#define DEVICE_VER 0x0001 -#define MANUFACTURER Xelus -#define PRODUCT Xelus Pachi RGB - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 17 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B14, B13, B12, B2, A8, B15 } -#define MATRIX_COL_PINS { C13, C14, C15, H0, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, H1, B10, B11 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -// I2C setup -#define I2C1_SCL_PIN B8 -#define I2C1_SDA_PIN B9 -#define I2C1_SCL_PAL_MODE 4 -#define I2C1_SDA_PAL_MODE 4 -#define I2C1_TIMINGR_PRESC 0U -#define I2C1_TIMINGR_SCLDEL 11U -#define I2C1_TIMINGR_SDADEL 0U -#define I2C1_TIMINGR_SCLH 14U -#define I2C1_TIMINGR_SCLL 42U - -// I2C EEPROM -#define EEPROM_I2C_24LC64 - -// RGB Matrix defines -#define DRIVER_ADDR_1 0b0110000 -//#define DRIVER_ADDR_2 0b0110001 - -#define DRIVER_COUNT 1 -#define DRIVER_LED_TOTAL 117 -#define ISSI_DRIVER_TOTAL DRIVER_LED_TOTAL - -#define RGB_MATRIX_STARTUP_VAL 80 -#define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_MATRIX_KEYPRESSES -#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL -// RGB Matrix Animation modes. Explicitly enabled -// For full list of effects, see: -// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects -#define ENABLE_RGB_MATRIX_ALPHAS_MODS -#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_BREATHING -#define ENABLE_RGB_MATRIX_BAND_SAT -#define ENABLE_RGB_MATRIX_BAND_VAL -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define ENABLE_RGB_MATRIX_CYCLE_ALL -#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -#define ENABLE_RGB_MATRIX_DUAL_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_BEACON -#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define ENABLE_RGB_MATRIX_RAINDROPS -#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define ENABLE_RGB_MATRIX_HUE_BREATHING -#define ENABLE_RGB_MATRIX_HUE_PENDULUM -#define ENABLE_RGB_MATRIX_HUE_WAVE -#define ENABLE_RGB_MATRIX_PIXEL_RAIN -#define ENABLE_RGB_MATRIX_PIXEL_FLOW -#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined -#define ENABLE_RGB_MATRIX_TYPING_HEATMAP -#define ENABLE_RGB_MATRIX_DIGITAL_RAIN -// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define ENABLE_RGB_MATRIX_SPLASH -#define ENABLE_RGB_MATRIX_MULTISPLASH -#define ENABLE_RGB_MATRIX_SOLID_SPLASH -#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH - -#define FORCE_NKRO +#include "config_common.h" diff --git a/keyboards/xelus/pachi/rgb/rev1/config.h b/keyboards/xelus/pachi/rgb/rev1/config.h new file mode 100644 index 0000000000..276a128e0c --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev1/config.h @@ -0,0 +1,120 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5845 // "XE" +#define PRODUCT_ID 0x5052 // "PR" +#define DEVICE_VER 0x0001 +#define MANUFACTURER Xelus +#define PRODUCT Xelus Pachi RGB + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B14, B13, B12, B2, A8, B15 } +#define MATRIX_COL_PINS { C13, C14, C15, H0, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, H1, B10, B11 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// I2C setup +#define I2C1_SCL 8 +#define I2C1_SDA 9 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_TIMINGR_PRESC 0U +#define I2C1_TIMINGR_SCLDEL 11U +#define I2C1_TIMINGR_SDADEL 0U +#define I2C1_TIMINGR_SCLH 14U +#define I2C1_TIMINGR_SCLL 42U + +// I2C EEPROM +#define EEPROM_I2C_24LC64 + +// RGB Matrix defines +#define DRIVER_ADDR_1 0b0110000 + +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 117 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#define ISSI_DRIVER_TOTAL DRIVER_LED_TOTAL + +#define RGB_MATRIX_STARTUP_VAL 80 +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL + +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +#define FORCE_NKRO diff --git a/keyboards/xelus/pachi/rgb/halconf.h b/keyboards/xelus/pachi/rgb/rev1/halconf.h index 633d94a880..633d94a880 100644 --- a/keyboards/xelus/pachi/rgb/halconf.h +++ b/keyboards/xelus/pachi/rgb/rev1/halconf.h diff --git a/keyboards/xelus/pachi/rgb/mcuconf.h b/keyboards/xelus/pachi/rgb/rev1/mcuconf.h index 20db196d29..20db196d29 100644 --- a/keyboards/xelus/pachi/rgb/mcuconf.h +++ b/keyboards/xelus/pachi/rgb/rev1/mcuconf.h diff --git a/keyboards/xelus/pachi/rgb/rev1/readme.md b/keyboards/xelus/pachi/rgb/rev1/readme.md new file mode 100644 index 0000000000..2fa775255a --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev1/readme.md @@ -0,0 +1,17 @@ +# Pachi RGB Rev 1 + +Pachi RGB Rev 1 TKL Keyboard that is a per-key RGB, hotswap, ANSI and tsangan. + +* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22) +* Hardware Supported: Group buys + +Make example for this keyboard (after setting up your build environment): + + make xelus/pachi/rgb/rev1:default + +Reset your keyboard in 3 ways: +* Software reset on Fn + Backspace +* Bootmagic reset: hold down the top left key (usually escape) and plugin the keyboard +* Physical reset button: on the back of the PCB, there should be a small golden button you can press + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/xelus/pachi/rgb/rev1/rev1.c b/keyboards/xelus/pachi/rgb/rev1/rev1.c new file mode 100644 index 0000000000..74f46e6812 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev1/rev1.c @@ -0,0 +1,239 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "rev1.h" + +// tested and working +void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } + +#ifdef RGB_MATRIX_ENABLE +#include "i2c_master.h" +#include "drivers/led/issi/is31fl3741.h" +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, CS39_SW1, CS38_SW1, CS37_SW1}, //A1 + {0, CS36_SW1, CS35_SW1, CS34_SW1}, //A2 + {0, CS33_SW1, CS32_SW1, CS31_SW1}, //A3 + {0, CS30_SW1, CS29_SW1, CS28_SW1}, //A4 + {0, CS27_SW1, CS26_SW1, CS25_SW1}, //A5 + {0, CS24_SW1, CS23_SW1, CS22_SW1}, //A6 + {0, CS21_SW1, CS20_SW1, CS19_SW1}, //A7 + {0, CS18_SW1, CS17_SW1, CS16_SW1}, //A8 + {0, CS15_SW1, CS14_SW1, CS13_SW1}, //A9 + {0, CS12_SW1, CS11_SW1, CS10_SW1}, //A10 + {0, CS9_SW1 , CS8_SW1 , CS7_SW1 }, //A11 + {0, CS6_SW1 , CS5_SW1 , CS4_SW1 }, //A12 + {0, CS3_SW1 , CS2_SW1 , CS1_SW1 }, //A13 + + {0, CS39_SW2, CS38_SW2, CS37_SW2}, //B1 + {0, CS36_SW2, CS35_SW2, CS34_SW2}, //B2 + {0, CS33_SW2, CS32_SW2, CS31_SW2}, //B3 + {0, CS30_SW2, CS29_SW2, CS28_SW2}, //B4 + {0, CS27_SW2, CS26_SW2, CS25_SW2}, //B5 + {0, CS24_SW2, CS23_SW2, CS22_SW2}, //B6 + {0, CS21_SW2, CS20_SW2, CS19_SW2}, //B7 + {0, CS18_SW2, CS17_SW2, CS16_SW2}, //B8 + {0, CS15_SW2, CS14_SW2, CS13_SW2}, //B9 + {0, CS12_SW2, CS11_SW2, CS10_SW2}, //B10 + {0, CS9_SW2 , CS8_SW2 , CS7_SW2 }, //B11 + {0, CS6_SW2 , CS5_SW2 , CS4_SW2 }, //B12 + {0, CS3_SW2 , CS2_SW2 , CS1_SW2 }, //B13 + + {0, CS39_SW3, CS38_SW3, CS37_SW3}, //C1 + {0, CS36_SW3, CS35_SW3, CS34_SW3}, //C2 + {0, CS33_SW3, CS32_SW3, CS31_SW3}, //C3 + {0, CS30_SW3, CS29_SW3, CS28_SW3}, //C4 + {0, CS27_SW3, CS26_SW3, CS25_SW3}, //C5 + {0, CS24_SW3, CS23_SW3, CS22_SW3}, //C6 + {0, CS21_SW3, CS20_SW3, CS19_SW3}, //C7 + {0, CS18_SW3, CS17_SW3, CS16_SW3}, //C8 + {0, CS15_SW3, CS14_SW3, CS13_SW3}, //C9 + {0, CS12_SW3, CS11_SW3, CS10_SW3}, //C10 + {0, CS9_SW3 , CS8_SW3 , CS7_SW3 }, //C11 + {0, CS6_SW3 , CS5_SW3 , CS4_SW3 }, //C12 + {0, CS3_SW3 , CS2_SW3 , CS1_SW3 }, //C13 + + {0, CS39_SW4, CS38_SW4, CS37_SW4}, //D1 + {0, CS36_SW4, CS35_SW4, CS34_SW4}, //D2 + {0, CS33_SW4, CS32_SW4, CS31_SW4}, //D3 + {0, CS30_SW4, CS29_SW4, CS28_SW4}, //D4 + {0, CS27_SW4, CS26_SW4, CS25_SW4}, //D5 + {0, CS24_SW4, CS23_SW4, CS22_SW4}, //D6 + {0, CS21_SW4, CS20_SW4, CS19_SW4}, //D7 + {0, CS18_SW4, CS17_SW4, CS16_SW4}, //D8 + {0, CS15_SW4, CS14_SW4, CS13_SW4}, //D9 + {0, CS12_SW4, CS11_SW4, CS10_SW4}, //D10 + {0, CS9_SW4 , CS8_SW4 , CS7_SW4 }, //D11 + {0, CS6_SW4 , CS5_SW4 , CS4_SW4 }, //D12 + {0, CS3_SW4 , CS2_SW4 , CS1_SW4 }, //D13 + + {0, CS39_SW5, CS38_SW5, CS37_SW5}, //E1 + {0, CS36_SW5, CS35_SW5, CS34_SW5}, //E2 + {0, CS33_SW5, CS32_SW5, CS31_SW5}, //E3 + {0, CS30_SW5, CS29_SW5, CS28_SW5}, //E4 + {0, CS27_SW5, CS26_SW5, CS25_SW5}, //E5 + {0, CS24_SW5, CS23_SW5, CS22_SW5}, //E6 + {0, CS21_SW5, CS20_SW5, CS19_SW5}, //E7 + {0, CS18_SW5, CS17_SW5, CS16_SW5}, //E8 + {0, CS15_SW5, CS14_SW5, CS13_SW5}, //E9 + {0, CS12_SW5, CS11_SW5, CS10_SW5}, //E10 + {0, CS9_SW5 , CS8_SW5 , CS7_SW5 }, //E11 + {0, CS6_SW5 , CS5_SW5 , CS4_SW5 }, //E12 + {0, CS3_SW5 , CS2_SW5 , CS1_SW5 }, //E13 + + {0, CS39_SW6, CS38_SW6, CS37_SW6}, //F1 + {0, CS36_SW6, CS35_SW6, CS34_SW6}, //F2 + {0, CS33_SW6, CS32_SW6, CS31_SW6}, //F3 + {0, CS30_SW6, CS29_SW6, CS28_SW6}, //F4 + {0, CS27_SW6, CS26_SW6, CS25_SW6}, //F5 + {0, CS24_SW6, CS23_SW6, CS22_SW6}, //F6 + {0, CS21_SW6, CS20_SW6, CS19_SW6}, //F7 + {0, CS18_SW6, CS17_SW6, CS16_SW6}, //F8 + {0, CS15_SW6, CS14_SW6, CS13_SW6}, //F9 + {0, CS12_SW6, CS11_SW6, CS10_SW6}, //F10 + {0, CS9_SW6 , CS8_SW6 , CS7_SW6 }, //F11 + {0, CS6_SW6 , CS5_SW6 , CS4_SW6 }, //F12 + {0, CS3_SW6 , CS2_SW6 , CS1_SW6 }, //F13 + + {0, CS39_SW7, CS38_SW7, CS37_SW7}, //G1 + {0, CS36_SW7, CS35_SW7, CS34_SW7}, //G2 + {0, CS33_SW7, CS32_SW7, CS31_SW7}, //G3 + {0, CS30_SW7, CS29_SW7, CS28_SW7}, //G4 + {0, CS27_SW7, CS26_SW7, CS25_SW7}, //G5 + {0, CS24_SW7, CS23_SW7, CS22_SW7}, //G6 + {0, CS21_SW7, CS20_SW7, CS19_SW7}, //G7 + {0, CS18_SW7, CS17_SW7, CS16_SW7}, //G8 + {0, CS15_SW7, CS14_SW7, CS13_SW7}, //G9 + {0, CS12_SW7, CS11_SW7, CS10_SW7}, //G10 + {0, CS9_SW7 , CS8_SW7 , CS7_SW7 }, //G11 + {0, CS6_SW7 , CS5_SW7 , CS4_SW7 }, //G12 + {0, CS3_SW7 , CS2_SW7 , CS1_SW7 }, //G13 + + {0, CS39_SW8, CS38_SW8, CS37_SW8}, //H1 + {0, CS36_SW8, CS35_SW8, CS34_SW8}, //H2 + {0, CS33_SW8, CS32_SW8, CS31_SW8}, //H3 + {0, CS30_SW8, CS29_SW8, CS28_SW8}, //H4 + {0, CS27_SW8, CS26_SW8, CS25_SW8}, //H5 + {0, CS24_SW8, CS23_SW8, CS22_SW8}, //H6 + {0, CS21_SW8, CS20_SW8, CS19_SW8}, //H7 + {0, CS18_SW8, CS17_SW8, CS16_SW8}, //H8 + {0, CS15_SW8, CS14_SW8, CS13_SW8}, //H9 + {0, CS12_SW8, CS11_SW8, CS10_SW8}, //H10 + {0, CS9_SW8 , CS8_SW8 , CS7_SW8 }, //H11 + {0, CS6_SW8 , CS5_SW8 , CS4_SW8 }, //H12 + {0, CS3_SW8 , CS2_SW8 , CS1_SW8 }, //H13 + + {0, CS39_SW9, CS38_SW9, CS37_SW9}, //I1 + {0, CS36_SW9, CS35_SW9, CS34_SW9}, //I2 + {0, CS33_SW9, CS32_SW9, CS31_SW9}, //I3 + {0, CS30_SW9, CS29_SW9, CS28_SW9}, //I4 + {0, CS27_SW9, CS26_SW9, CS25_SW9}, //I5 + {0, CS24_SW9, CS23_SW9, CS22_SW9}, //I6 + {0, CS21_SW9, CS20_SW9, CS19_SW9}, //I7 + {0, CS18_SW9, CS17_SW9, CS16_SW9}, //I8 + {0, CS15_SW9, CS14_SW9, CS13_SW9}, //I9 + {0, CS12_SW9, CS11_SW9, CS10_SW9}, //I10 + {0, CS9_SW9 , CS8_SW9 , CS7_SW9 }, //I11 + {0, CS6_SW9 , CS5_SW9 , CS4_SW9 }, //I12 + {0, CS3_SW9 , CS2_SW9 , CS1_SW9 } //I13 +}; + +__attribute__ ((weak)) +led_config_t g_led_config = { { + { -1+00+3 , NO_LED, -1+26+3 , -1+39+3 , -1+52+3 , -1+65+3 , -1+78+3 , -1+91+3 , -1+104+3 , -1+00+1 , -1+13+1 , -1+26+1 , -1+39+1 , -1+52+1 , -1+65+1 , -1+78+1 , -1+91+1 }, + { -1+00+4 , -1+13+4 , -1+26+4 , -1+39+4 , -1+52+4 , -1+65+4 , -1+78+4 , -1+91+4 , -1+104+4 , -1+00+2 , -1+13+2 , -1+26+2 , -1+39+2 , -1+52+2 , -1+65+2 , -1+78+2 , -1+91+2 }, + { -1+00+6 , -1+13+6 , -1+26+6 , -1+39+6 , -1+52+6 , -1+65+6 , -1+78+6 , -1+91+6 , -1+104+6 , -1+00+5 , -1+13+5 , -1+26+5 , -1+39+5 , -1+52+5 , -1+65+5 , -1+78+5 , -1+91+6 }, + { -1+00+8 , -1+13+8 , -1+26+8 , -1+39+8 , -1+52+8 , -1+65+8 , -1+78+8 , -1+91+8 , -1+104+8 , -1+00+7 , -1+13+7 , -1+26+7 , NO_LED , -1+52+7 , NO_LED , NO_LED , NO_LED }, + { -1+00+11, -1+13+11, -1+26+11, -1+39+11, -1+52+11, -1+65+11, -1+78+11, -1+91+11, -1+104+11, -1+00+10, -1+13+10, NO_LED , -1+52+10, NO_LED , NO_LED , -1+78+10, NO_LED }, + { -1+00+9 , -1+13+9 , -1+26+9 , NO_LED , NO_LED , -1+65+9 , NO_LED , NO_LED , NO_LED , NO_LED , -1+13+12, NO_LED , -1+39+12, -1+52+12, -1+65+12, -1+78+12, -1+91+12} +}, { + {123, 0}, {117, 15}, {0 , 0}, {0 , 15}, {123, 27}, {3 , 27}, {127, 40}, {5 , 40}, {2 , 64}, {133, 52}, {8 , 52}, {131, 64}, {255,255}, + {143, 0}, {130, 15}, {255,255}, {13 , 15}, {136, 27}, {19 , 27}, {140, 40}, {23 , 40}, {18 , 64}, {146, 52}, {29 , 52}, {148, 64}, {255,255}, + {156, 0}, {143, 15}, {26 , 0}, {26 , 15}, {149, 27}, {32 , 27}, {153, 40}, {36 , 40}, {34 , 64}, {255,255}, {42 , 52}, {255,255}, {255,255}, + {169, 0}, {156, 15}, {39 , 0}, {39 , 15}, {162, 27}, {45 , 27}, {255,255}, {49 , 40}, {255,255}, {255,255}, {55 , 52}, {164, 64}, {255,255}, + {182, 0}, {175, 15}, {52 , 0}, {52 , 15}, {179, 27}, {58 , 27}, {174, 40}, {62 , 40}, {255,255}, {170, 52}, {68 , 52}, {180, 64}, {255,255}, + {198, 0}, {198, 15}, {65 , 0}, {65 , 15}, {198, 27}, {71 , 27}, {255,255}, {75 , 40}, {83 , 64}, {255,255}, {81 , 52}, {198, 64}, {255,255}, + {211, 0}, {211, 15}, {84 , 0}, {78 , 15}, {211, 27}, {84 , 27}, {255,255}, {88 , 40}, {255,255}, {211, 52}, {94 , 52}, {211, 64}, {255,255}, + {224, 0}, {224, 15}, {97 , 0}, {91 , 15}, {224, 27}, {97 , 27}, {255,255}, {101, 40}, {255,255}, {255,255}, {107, 52}, {224, 64}, {255,255}, + {255,255}, {255,255}, {110, 0}, {104, 15}, {255,255}, {110, 27}, {255,255}, {114, 40}, {255,255}, {255,255}, {120, 52}, {255,255}, {255,255} +}, { + 1, 4, 1, 1, 4, 1, 4, 1, 1, 4, 1, 4, 4, //0-12 + 1, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 1, 4, //13-25 + 1, 4, 1, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, //26-38 + 1, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, //39-51 + 1, 1, 1, 4, 1, 4, 1, 4, 4, 1, 4, 1, 4, //52-64 + 1, 1, 1, 4, 1, 4, 4, 4, 1, 4, 4, 1, 4, //65-77 + 1, 1, 1, 4, 1, 4, 4, 4, 4, 1, 4, 1, 4, //78-90 + 1, 1, 1, 4, 1, 4, 4, 4, 4, 4, 4, 1, 4, //91-103 + 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 //104-116 +} }; + +static void init(void) { + i2c_init(); + IS31FL3741_init(DRIVER_ADDR_1); + for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { + bool enabled = !( ( index == -1+0+13) || //A13 + ( index == -1+13+3) || //B3 + ( index == -1+13+13) || //B13 + ( index == -1+26+10) || //C10 + ( index == -1+26+12) || //C12 + ( index == -1+26+13) || //C13 + ( index == -1+39+7) || //D7 + ( index == -1+39+9) || //D9 + ( index == -1+39+10) || //D10 + ( index == -1+39+13) || //D13 + ( index == -1+52+9) || //E9 + ( index == -1+52+13) || //E13 + ( index == -1+65+7) || //F7 + ( index == -1+65+10) || //F10 + ( index == -1+65+13) || //F13 + ( index == -1+78+7) || //G7 + ( index == -1+78+9) || //G9 + ( index == -1+78+13) || //G13 + ( index == -1+91+7) || //H7 + ( index == -1+91+9) || //H9 + ( index == -1+91+10) || //H10 + ( index == -1+91+13) || //H13 + ( index == -1+104+1) || //I1 + ( index == -1+104+2) || //I2 + ( index == -1+104+5) || //I5 + ( index == -1+104+7) || //I7 + ( index == -1+104+9) || //I9 + ( index == -1+104+10) || //I10 + ( index == -1+104+12) || //I12 + ( index == -1+104+13) //I13 + ); + IS31FL3741_set_led_control_register(index, enabled, enabled, enabled); + } + IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); +} + +static void flush(void) { + IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, 0); +} + +const rgb_matrix_driver_t rgb_matrix_driver = { + .init = init, + .flush = flush, + .set_color = IS31FL3741_set_color, + .set_color_all = IS31FL3741_set_color_all +}; +#endif diff --git a/keyboards/xelus/pachi/rgb/rev1/rev1.h b/keyboards/xelus/pachi/rgb/rev1/rev1.h new file mode 100644 index 0000000000..894519ebe2 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev1/rev1.h @@ -0,0 +1,36 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +#define LAYOUT_ansi_tsangan( \ + K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K412, K415, \ + K500, K501, K502, K505, K510, K512, K513, K514, K515, K516 \ +) { \ + { K000, ____, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, ____, K313, ____, ____, ____ }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, ____, K412, ____, ____, K415, ____ }, \ + { K500, K501, K502, ____, ____, K505, ____, ____, ____, ____, K510, ____, K512, K513, K514, K515, K516 } \ +} diff --git a/keyboards/xelus/pachi/rgb/rules.mk b/keyboards/xelus/pachi/rgb/rev1/rules.mk index 501060fbd1..501060fbd1 100644 --- a/keyboards/xelus/pachi/rgb/rules.mk +++ b/keyboards/xelus/pachi/rgb/rev1/rules.mk diff --git a/keyboards/xelus/pachi/rgb/rev2/config.h b/keyboards/xelus/pachi/rgb/rev2/config.h new file mode 100644 index 0000000000..f66afcfb79 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/config.h @@ -0,0 +1,121 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5845 // "XE" +#define PRODUCT_ID 0x5052 // "PR" +#define DEVICE_VER 0x0002 +#define MANUFACTURER Xelus +#define PRODUCT Xelus Pachi RGB + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { A5, A6, B0, A7, A8, B1, B4, B5, A15, B3, A13, A14 } +#define MATRIX_COL_PINS { C14, C15, A0, A1, A2, A3, A4, A10, A9} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// I2C setup +#define I2C1_SCL 6 +#define I2C1_SDA 7 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_TIMINGR_PRESC 0U +#define I2C1_TIMINGR_SCLDEL 11U +#define I2C1_TIMINGR_SDADEL 0U +#define I2C1_TIMINGR_SCLH 14U +#define I2C1_TIMINGR_SCLL 42U + +// I2C EEPROM +#define EEPROM_I2C_24LC64 + +// RGB Matrix defines +#define DRIVER_ADDR_1 0b0110000 + +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 117 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#define ISSI_DRIVER_TOTAL DRIVER_LED_TOTAL + +#define RGB_MATRIX_STARTUP_VAL 80 +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL + +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + + +#define FORCE_NKRO diff --git a/keyboards/xelus/pachi/rgb/rev2/halconf.h b/keyboards/xelus/pachi/rgb/rev2/halconf.h new file mode 100644 index 0000000000..633d94a880 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/halconf.h @@ -0,0 +1,27 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + +#pragma once + +#define HAL_USE_I2C TRUE + +#include_next <halconf.h> + diff --git a/keyboards/xelus/pachi/rgb/rev2/mcuconf.h b/keyboards/xelus/pachi/rgb/rev2/mcuconf.h new file mode 100644 index 0000000000..20db196d29 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/mcuconf.h @@ -0,0 +1,28 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + */ + +#pragma once + +#include_next <mcuconf.h> + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + diff --git a/keyboards/xelus/pachi/rgb/rev2/readme.md b/keyboards/xelus/pachi/rgb/rev2/readme.md new file mode 100644 index 0000000000..82a10e4185 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/readme.md @@ -0,0 +1,18 @@ +# Pachi RGB Rev 2 + +Pachi RGB Rev 2 TKL Keyboard that is a per-key RGB, hotswap, ANSI and tsangan. + +* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22) +* Hardware Supported: Group buys + +Make example for this keyboard (after setting up your build environment): + + make xelus/pachi/rgb/rev2:default + +Reset your keyboard in 3 ways: + +* Software reset on Fn + Backspace +* Bootmagic reset: hold down the top left key (usually escape) and plugin the keyboard +* Physical reset button: on the back of the PCB, there should be a small golden button you can press + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/xelus/pachi/rgb/rev2/rev2.c b/keyboards/xelus/pachi/rgb/rev2/rev2.c new file mode 100644 index 0000000000..3a2e7cacad --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/rev2.c @@ -0,0 +1,245 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "rev2.h" + +// tested and working +void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } + +#ifdef RGB_MATRIX_ENABLE +#include "i2c_master.h" +#include "drivers/led/issi/is31fl3741.h" +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, CS39_SW1, CS38_SW1, CS37_SW1}, //A1 + {0, CS36_SW1, CS35_SW1, CS34_SW1}, //A2 + {0, CS33_SW1, CS32_SW1, CS31_SW1}, //A3 + {0, CS30_SW1, CS29_SW1, CS28_SW1}, //A4 + {0, CS27_SW1, CS26_SW1, CS25_SW1}, //A5 + {0, CS24_SW1, CS23_SW1, CS22_SW1}, //A6 + {0, CS21_SW1, CS20_SW1, CS19_SW1}, //A7 + {0, CS18_SW1, CS17_SW1, CS16_SW1}, //A8 + {0, CS15_SW1, CS14_SW1, CS13_SW1}, //A9 + {0, CS12_SW1, CS11_SW1, CS10_SW1}, //A10 + {0, CS9_SW1 , CS8_SW1 , CS7_SW1 }, //A11 + {0, CS6_SW1 , CS5_SW1 , CS4_SW1 }, //A12 + {0, CS3_SW1 , CS2_SW1 , CS1_SW1 }, //A13 + + {0, CS39_SW2, CS38_SW2, CS37_SW2}, //B1 + {0, CS36_SW2, CS35_SW2, CS34_SW2}, //B2 + {0, CS33_SW2, CS32_SW2, CS31_SW2}, //B3 + {0, CS30_SW2, CS29_SW2, CS28_SW2}, //B4 + {0, CS27_SW2, CS26_SW2, CS25_SW2}, //B5 + {0, CS24_SW2, CS23_SW2, CS22_SW2}, //B6 + {0, CS21_SW2, CS20_SW2, CS19_SW2}, //B7 + {0, CS18_SW2, CS17_SW2, CS16_SW2}, //B8 + {0, CS15_SW2, CS14_SW2, CS13_SW2}, //B9 + {0, CS12_SW2, CS11_SW2, CS10_SW2}, //B10 + {0, CS9_SW2 , CS8_SW2 , CS7_SW2 }, //B11 + {0, CS6_SW2 , CS5_SW2 , CS4_SW2 }, //B12 + {0, CS3_SW2 , CS2_SW2 , CS1_SW2 }, //B13 + + {0, CS39_SW3, CS38_SW3, CS37_SW3}, //C1 + {0, CS36_SW3, CS35_SW3, CS34_SW3}, //C2 + {0, CS33_SW3, CS32_SW3, CS31_SW3}, //C3 + {0, CS30_SW3, CS29_SW3, CS28_SW3}, //C4 + {0, CS27_SW3, CS26_SW3, CS25_SW3}, //C5 + {0, CS24_SW3, CS23_SW3, CS22_SW3}, //C6 + {0, CS21_SW3, CS20_SW3, CS19_SW3}, //C7 + {0, CS18_SW3, CS17_SW3, CS16_SW3}, //C8 + {0, CS15_SW3, CS14_SW3, CS13_SW3}, //C9 + {0, CS12_SW3, CS11_SW3, CS10_SW3}, //C10 + {0, CS9_SW3 , CS8_SW3 , CS7_SW3 }, //C11 + {0, CS6_SW3 , CS5_SW3 , CS4_SW3 }, //C12 + {0, CS3_SW3 , CS2_SW3 , CS1_SW3 }, //C13 + + {0, CS39_SW4, CS38_SW4, CS37_SW4}, //D1 + {0, CS36_SW4, CS35_SW4, CS34_SW4}, //D2 + {0, CS33_SW4, CS32_SW4, CS31_SW4}, //D3 + {0, CS30_SW4, CS29_SW4, CS28_SW4}, //D4 + {0, CS27_SW4, CS26_SW4, CS25_SW4}, //D5 + {0, CS24_SW4, CS23_SW4, CS22_SW4}, //D6 + {0, CS21_SW4, CS20_SW4, CS19_SW4}, //D7 + {0, CS18_SW4, CS17_SW4, CS16_SW4}, //D8 + {0, CS15_SW4, CS14_SW4, CS13_SW4}, //D9 + {0, CS12_SW4, CS11_SW4, CS10_SW4}, //D10 + {0, CS9_SW4 , CS8_SW4 , CS7_SW4 }, //D11 + {0, CS6_SW4 , CS5_SW4 , CS4_SW4 }, //D12 + {0, CS3_SW4 , CS2_SW4 , CS1_SW4 }, //D13 + + {0, CS39_SW5, CS38_SW5, CS37_SW5}, //E1 + {0, CS36_SW5, CS35_SW5, CS34_SW5}, //E2 + {0, CS33_SW5, CS32_SW5, CS31_SW5}, //E3 + {0, CS30_SW5, CS29_SW5, CS28_SW5}, //E4 + {0, CS27_SW5, CS26_SW5, CS25_SW5}, //E5 + {0, CS24_SW5, CS23_SW5, CS22_SW5}, //E6 + {0, CS21_SW5, CS20_SW5, CS19_SW5}, //E7 + {0, CS18_SW5, CS17_SW5, CS16_SW5}, //E8 + {0, CS15_SW5, CS14_SW5, CS13_SW5}, //E9 + {0, CS12_SW5, CS11_SW5, CS10_SW5}, //E10 + {0, CS9_SW5 , CS8_SW5 , CS7_SW5 }, //E11 + {0, CS6_SW5 , CS5_SW5 , CS4_SW5 }, //E12 + {0, CS3_SW5 , CS2_SW5 , CS1_SW5 }, //E13 + + {0, CS39_SW6, CS38_SW6, CS37_SW6}, //F1 + {0, CS36_SW6, CS35_SW6, CS34_SW6}, //F2 + {0, CS33_SW6, CS32_SW6, CS31_SW6}, //F3 + {0, CS30_SW6, CS29_SW6, CS28_SW6}, //F4 + {0, CS27_SW6, CS26_SW6, CS25_SW6}, //F5 + {0, CS24_SW6, CS23_SW6, CS22_SW6}, //F6 + {0, CS21_SW6, CS20_SW6, CS19_SW6}, //F7 + {0, CS18_SW6, CS17_SW6, CS16_SW6}, //F8 + {0, CS15_SW6, CS14_SW6, CS13_SW6}, //F9 + {0, CS12_SW6, CS11_SW6, CS10_SW6}, //F10 + {0, CS9_SW6 , CS8_SW6 , CS7_SW6 }, //F11 + {0, CS6_SW6 , CS5_SW6 , CS4_SW6 }, //F12 + {0, CS3_SW6 , CS2_SW6 , CS1_SW6 }, //F13 + + {0, CS39_SW7, CS38_SW7, CS37_SW7}, //G1 + {0, CS36_SW7, CS35_SW7, CS34_SW7}, //G2 + {0, CS33_SW7, CS32_SW7, CS31_SW7}, //G3 + {0, CS30_SW7, CS29_SW7, CS28_SW7}, //G4 + {0, CS27_SW7, CS26_SW7, CS25_SW7}, //G5 + {0, CS24_SW7, CS23_SW7, CS22_SW7}, //G6 + {0, CS21_SW7, CS20_SW7, CS19_SW7}, //G7 + {0, CS18_SW7, CS17_SW7, CS16_SW7}, //G8 + {0, CS15_SW7, CS14_SW7, CS13_SW7}, //G9 + {0, CS12_SW7, CS11_SW7, CS10_SW7}, //G10 + {0, CS9_SW7 , CS8_SW7 , CS7_SW7 }, //G11 + {0, CS6_SW7 , CS5_SW7 , CS4_SW7 }, //G12 + {0, CS3_SW7 , CS2_SW7 , CS1_SW7 }, //G13 + + {0, CS39_SW8, CS38_SW8, CS37_SW8}, //H1 + {0, CS36_SW8, CS35_SW8, CS34_SW8}, //H2 + {0, CS33_SW8, CS32_SW8, CS31_SW8}, //H3 + {0, CS30_SW8, CS29_SW8, CS28_SW8}, //H4 + {0, CS27_SW8, CS26_SW8, CS25_SW8}, //H5 + {0, CS24_SW8, CS23_SW8, CS22_SW8}, //H6 + {0, CS21_SW8, CS20_SW8, CS19_SW8}, //H7 + {0, CS18_SW8, CS17_SW8, CS16_SW8}, //H8 + {0, CS15_SW8, CS14_SW8, CS13_SW8}, //H9 + {0, CS12_SW8, CS11_SW8, CS10_SW8}, //H10 + {0, CS9_SW8 , CS8_SW8 , CS7_SW8 }, //H11 + {0, CS6_SW8 , CS5_SW8 , CS4_SW8 }, //H12 + {0, CS3_SW8 , CS2_SW8 , CS1_SW8 }, //H13 + + {0, CS39_SW9, CS38_SW9, CS37_SW9}, //I1 + {0, CS36_SW9, CS35_SW9, CS34_SW9}, //I2 + {0, CS33_SW9, CS32_SW9, CS31_SW9}, //I3 + {0, CS30_SW9, CS29_SW9, CS28_SW9}, //I4 + {0, CS27_SW9, CS26_SW9, CS25_SW9}, //I5 + {0, CS24_SW9, CS23_SW9, CS22_SW9}, //I6 + {0, CS21_SW9, CS20_SW9, CS19_SW9}, //I7 + {0, CS18_SW9, CS17_SW9, CS16_SW9}, //I8 + {0, CS15_SW9, CS14_SW9, CS13_SW9}, //I9 + {0, CS12_SW9, CS11_SW9, CS10_SW9}, //I10 + {0, CS9_SW9 , CS8_SW9 , CS7_SW9 }, //I11 + {0, CS6_SW9 , CS5_SW9 , CS4_SW9 }, //I12 + {0, CS3_SW9 , CS2_SW9 , CS1_SW9 } //I13 +}; + +__attribute__ ((weak)) +led_config_t g_led_config = { { + { -1+00+3 , -1+26+3 , -1+52+3 , -1+78+3 , -1+104+3, -1+13+1 , -1+39+1 , -1+65+1 , -1+91+1 }, + { NO_LED , -1+39+3 , -1+65+3 , -1+91+3 , -1+00+1 , -1+26+1 , -1+52+1 , -1+78+1 , NO_LED }, + { -1+00+4 , -1+26+4 , -1+52+4 , -1+78+4 , -1+104+4, -1+13+2 , -1+39+2 , -1+65+2 , -1+91+2 }, + { -1+13+4 , -1+39+4 , -1+65+4 , -1+91+4 , -1+00+2 , -1+26+2 , -1+52+2 , -1+78+2 , NO_LED }, + { -1+00+6 , -1+26+6 , -1+52+6 , -1+78+6 , -1+104+6, -1+13+5 , -1+39+5 , -1+65+5 , -1+91+6 }, + { -1+13+6 , -1+39+6 , -1+65+6 , -1+91+6 , -1+00+5 , -1+26+5 , -1+52+5 , -1+78+5 , NO_LED }, + { -1+00+8 , -1+26+8 , -1+52+8 , -1+78+8 , -1+104+8, -1+13+7 , NO_LED , NO_LED , NO_LED }, + { -1+13+8 , -1+39+8 , -1+65+8 , -1+91+8 , -1+00+7 , -1+26+7 , -1+52+7 , NO_LED , NO_LED }, + { -1+00+11, -1+26+11, -1+52+11, -1+78+11,-1+104+11, -1+13+10, -1+52+10, NO_LED , NO_LED }, + { -1+13+11, -1+39+11, -1+65+11, -1+91+11, -1+00+10, NO_LED , NO_LED , -1+78+10, NO_LED }, + { -1+00+9 , -1+26+9 , NO_LED , NO_LED , NO_LED , -1+13+12, -1+39+12, -1+65+12, -1+91+12 }, + { -1+13+9 , NO_LED , -1+65+9 , NO_LED , NO_LED , NO_LED , -1+52+12, -1+78+12, NO_LED } +}, { + {123, 0}, {117, 15}, {0 , 0}, {0 , 15}, {123, 27}, {3 , 27}, {127, 40}, {5 , 40}, {2 , 64}, {133, 52}, {8 , 52}, {131, 64}, {255,255}, + {143, 0}, {130, 15}, {255,255}, {13 , 15}, {136, 27}, {19 , 27}, {140, 40}, {23 , 40}, {18 , 64}, {146, 52}, {29 , 52}, {148, 64}, {255,255}, + {156, 0}, {143, 15}, {26 , 0}, {26 , 15}, {149, 27}, {32 , 27}, {153, 40}, {36 , 40}, {34 , 64}, {255,255}, {42 , 52}, {255,255}, {255,255}, + {169, 0}, {156, 15}, {39 , 0}, {39 , 15}, {162, 27}, {45 , 27}, {255,255}, {49 , 40}, {255,255}, {255,255}, {55 , 52}, {164, 64}, {255,255}, + {182, 0}, {175, 15}, {52 , 0}, {52 , 15}, {179, 27}, {58 , 27}, {174, 40}, {62 , 40}, {255,255}, {170, 52}, {68 , 52}, {180, 64}, {255,255}, + {198, 0}, {198, 15}, {65 , 0}, {65 , 15}, {198, 27}, {71 , 27}, {255,255}, {75 , 40}, {83 , 64}, {255,255}, {81 , 52}, {198, 64}, {255,255}, + {211, 0}, {211, 15}, {84 , 0}, {78 , 15}, {211, 27}, {84 , 27}, {255,255}, {88 , 40}, {255,255}, {211, 52}, {94 , 52}, {211, 64}, {255,255}, + {224, 0}, {224, 15}, {97 , 0}, {91 , 15}, {224, 27}, {97 , 27}, {255,255}, {101, 40}, {255,255}, {255,255}, {107, 52}, {224, 64}, {255,255}, + {255,255}, {255,255}, {110, 0}, {104, 15}, {255,255}, {110, 27}, {255,255}, {114, 40}, {255,255}, {255,255}, {120, 52}, {255,255}, {255,255} +}, { + 1, 4, 1, 1, 4, 1, 4, 1, 1, 4, 1, 4, 4, //0-12 + 1, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 1, 4, //13-25 + 1, 4, 1, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, //26-38 + 1, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, //39-51 + 1, 1, 1, 4, 1, 4, 1, 4, 4, 1, 4, 1, 4, //52-64 + 1, 1, 1, 4, 1, 4, 4, 4, 1, 4, 4, 1, 4, //65-77 + 1, 1, 1, 4, 1, 4, 4, 4, 4, 1, 4, 1, 4, //78-90 + 1, 1, 1, 4, 1, 4, 4, 4, 4, 4, 4, 1, 4, //91-103 + 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 //104-116 +} }; + +static void init(void) { + i2c_init(); + IS31FL3741_init(DRIVER_ADDR_1); + for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { + bool enabled = !( ( index == -1+0+13) || //A13 + ( index == -1+13+3) || //B3 + ( index == -1+13+13) || //B13 + ( index == -1+26+10) || //C10 + ( index == -1+26+12) || //C12 + ( index == -1+26+13) || //C13 + ( index == -1+39+7) || //D7 + ( index == -1+39+9) || //D9 + ( index == -1+39+10) || //D10 + ( index == -1+39+13) || //D13 + ( index == -1+52+9) || //E9 + ( index == -1+52+13) || //E13 + ( index == -1+65+7) || //F7 + ( index == -1+65+10) || //F10 + ( index == -1+65+13) || //F13 + ( index == -1+78+7) || //G7 + ( index == -1+78+9) || //G9 + ( index == -1+78+13) || //G13 + ( index == -1+91+7) || //H7 + ( index == -1+91+9) || //H9 + ( index == -1+91+10) || //H10 + ( index == -1+91+13) || //H13 + ( index == -1+104+1) || //I1 + ( index == -1+104+2) || //I2 + ( index == -1+104+5) || //I5 + ( index == -1+104+7) || //I7 + ( index == -1+104+9) || //I9 + ( index == -1+104+10) || //I10 + ( index == -1+104+12) || //I12 + ( index == -1+104+13) //I13 + ); + IS31FL3741_set_led_control_register(index, enabled, enabled, enabled); + } + IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); +} + +static void flush(void) { + IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, 0); +} + +const rgb_matrix_driver_t rgb_matrix_driver = { + .init = init, + .flush = flush, + .set_color = IS31FL3741_set_color, + .set_color_all = IS31FL3741_set_color_all +}; +#endif diff --git a/keyboards/xelus/pachi/rgb/rev2/rev2.h b/keyboards/xelus/pachi/rgb/rev2/rev2.h new file mode 100644 index 0000000000..edc164d729 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/rev2.h @@ -0,0 +1,42 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define _____ KC_NO + +#define LAYOUT_ansi_tsangan( \ + K0000, K0001, K0101, K0002, K0102, K0003, K0103, K0004, K0104, K0005, K0105, K0006, K0106, K0007, K0107, K0008, \ + K0200, K0300, K0201, K0301, K0202, K0302, K0203, K0303, K0204, K0304, K0205, K0305, K0206, K0306, K0207, K0307, K0208, \ + K0400, K0500, K0401, K0501, K0402, K0502, K0403, K0503, K0404, K0504, K0405, K0505, K0406, K0506, K0407, K0507, K0408, \ + K0600, K0700, K0601, K0701, K0602, K0702, K0603, K0703, K0604, K0704, K0605, K0705, K0706, \ + K0800, K0900, K0801, K0901, K0802, K0902, K0803, K0903, K0804, K0904, K0805, K0806, K0907, \ + K1000, K1100, K1001, K1102, K1005, K1006, K1106, K1007, K1107, K1008 \ +) { \ + { K0000, K0001, K0002, K0003, K0004, K0005, K0006, K0007, K0008 }, \ + { _____, K0101, K0102, K0103, K0104, K0105, K0106, K0107, _____ }, \ + { K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208 }, \ + { K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, _____ }, \ + { K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408 }, \ + { K0500, K0501, K0502, K0503, K0504, K0505, K0506, K0507, _____ }, \ + { K0600, K0601, K0602, K0603, K0604, K0605, _____, _____, _____ }, \ + { K0700, K0701, K0702, K0703, K0704, K0705, K0706, _____, _____ }, \ + { K0800, K0801, K0802, K0803, K0804, K0805, K0806, _____, _____ }, \ + { K0900, K0901, K0902, K0903, K0904, _____, _____, K0907, _____ }, \ + { K1000, K1001, _____, _____, _____, K1005, K1006, K1007, K1008 }, \ + { K1100, _____, K1102, _____, _____, _____, K1106, K1107, _____ } \ +} diff --git a/keyboards/xelus/pachi/rgb/rev2/rules.mk b/keyboards/xelus/pachi/rgb/rev2/rules.mk new file mode 100644 index 0000000000..0834a9ab6f --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/rules.mk @@ -0,0 +1,31 @@ +# MCU name +MCU = STM32L422 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output + +EEPROM_DRIVER = i2c + +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = custom + +COMMON_VPATH += $(DRIVER_PATH)/issi +SRC += drivers/led/issi/is31fl3741.c + +LTO_ENABLE = yes +OPT = 2 diff --git a/keyboards/xelus/pachi/rgb/rgb.c b/keyboards/xelus/pachi/rgb/rgb.c index 4f2f2c7b77..93ca8406de 100644 --- a/keyboards/xelus/pachi/rgb/rgb.c +++ b/keyboards/xelus/pachi/rgb/rgb.c @@ -13,231 +13,4 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ - #include "rgb.h" -#include <hal.h> -#include <ch.h> - -// tested and working -void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } - -#ifdef RGB_MATRIX_ENABLE -#include <i2c_master.h> -#include "drivers/led/issi/is31fl3741.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, CS39_SW1, CS38_SW1, CS37_SW1}, //A1 - {0, CS36_SW1, CS35_SW1, CS34_SW1}, //A2 - {0, CS33_SW1, CS32_SW1, CS31_SW1}, //A3 - {0, CS30_SW1, CS29_SW1, CS28_SW1}, //A4 - {0, CS27_SW1, CS26_SW1, CS25_SW1}, //A5 - {0, CS24_SW1, CS23_SW1, CS22_SW1}, //A6 - {0, CS21_SW1, CS20_SW1, CS19_SW1}, //A7 - {0, CS18_SW1, CS17_SW1, CS16_SW1}, //A8 - {0, CS15_SW1, CS14_SW1, CS13_SW1}, //A9 - {0, CS12_SW1, CS11_SW1, CS10_SW1}, //A10 - {0, CS9_SW1 , CS8_SW1 , CS7_SW1 }, //A11 - {0, CS6_SW1 , CS5_SW1 , CS4_SW1 }, //A12 - {0, CS3_SW1 , CS2_SW1 , CS1_SW1 }, //A13 - - {0, CS39_SW2, CS38_SW2, CS37_SW2}, //B1 - {0, CS36_SW2, CS35_SW2, CS34_SW2}, //B2 - {0, CS33_SW2, CS32_SW2, CS31_SW2}, //B3 - {0, CS30_SW2, CS29_SW2, CS28_SW2}, //B4 - {0, CS27_SW2, CS26_SW2, CS25_SW2}, //B5 - {0, CS24_SW2, CS23_SW2, CS22_SW2}, //B6 - {0, CS21_SW2, CS20_SW2, CS19_SW2}, //B7 - {0, CS18_SW2, CS17_SW2, CS16_SW2}, //B8 - {0, CS15_SW2, CS14_SW2, CS13_SW2}, //B9 - {0, CS12_SW2, CS11_SW2, CS10_SW2}, //B10 - {0, CS9_SW2 , CS8_SW2 , CS7_SW2 }, //B11 - {0, CS6_SW2 , CS5_SW2 , CS4_SW2 }, //B12 - {0, CS3_SW2 , CS2_SW2 , CS1_SW2 }, //B13 - - {0, CS39_SW3, CS38_SW3, CS37_SW3}, //C1 - {0, CS36_SW3, CS35_SW3, CS34_SW3}, //C2 - {0, CS33_SW3, CS32_SW3, CS31_SW3}, //C3 - {0, CS30_SW3, CS29_SW3, CS28_SW3}, //C4 - {0, CS27_SW3, CS26_SW3, CS25_SW3}, //C5 - {0, CS24_SW3, CS23_SW3, CS22_SW3}, //C6 - {0, CS21_SW3, CS20_SW3, CS19_SW3}, //C7 - {0, CS18_SW3, CS17_SW3, CS16_SW3}, //C8 - {0, CS15_SW3, CS14_SW3, CS13_SW3}, //C9 - {0, CS12_SW3, CS11_SW3, CS10_SW3}, //C10 - {0, CS9_SW3 , CS8_SW3 , CS7_SW3 }, //C11 - {0, CS6_SW3 , CS5_SW3 , CS4_SW3 }, //C12 - {0, CS3_SW3 , CS2_SW3 , CS1_SW3 }, //C13 - - {0, CS39_SW4, CS38_SW4, CS37_SW4}, //D1 - {0, CS36_SW4, CS35_SW4, CS34_SW4}, //D2 - {0, CS33_SW4, CS32_SW4, CS31_SW4}, //D3 - {0, CS30_SW4, CS29_SW4, CS28_SW4}, //D4 - {0, CS27_SW4, CS26_SW4, CS25_SW4}, //D5 - {0, CS24_SW4, CS23_SW4, CS22_SW4}, //D6 - {0, CS21_SW4, CS20_SW4, CS19_SW4}, //D7 - {0, CS18_SW4, CS17_SW4, CS16_SW4}, //D8 - {0, CS15_SW4, CS14_SW4, CS13_SW4}, //D9 - {0, CS12_SW4, CS11_SW4, CS10_SW4}, //D10 - {0, CS9_SW4 , CS8_SW4 , CS7_SW4 }, //D11 - {0, CS6_SW4 , CS5_SW4 , CS4_SW4 }, //D12 - {0, CS3_SW4 , CS2_SW4 , CS1_SW4 }, //D13 - - {0, CS39_SW5, CS38_SW5, CS37_SW5}, //E1 - {0, CS36_SW5, CS35_SW5, CS34_SW5}, //E2 - {0, CS33_SW5, CS32_SW5, CS31_SW5}, //E3 - {0, CS30_SW5, CS29_SW5, CS28_SW5}, //E4 - {0, CS27_SW5, CS26_SW5, CS25_SW5}, //E5 - {0, CS24_SW5, CS23_SW5, CS22_SW5}, //E6 - {0, CS21_SW5, CS20_SW5, CS19_SW5}, //E7 - {0, CS18_SW5, CS17_SW5, CS16_SW5}, //E8 - {0, CS15_SW5, CS14_SW5, CS13_SW5}, //E9 - {0, CS12_SW5, CS11_SW5, CS10_SW5}, //E10 - {0, CS9_SW5 , CS8_SW5 , CS7_SW5 }, //E11 - {0, CS6_SW5 , CS5_SW5 , CS4_SW5 }, //E12 - {0, CS3_SW5 , CS2_SW5 , CS1_SW5 }, //E13 - - {0, CS39_SW6, CS38_SW6, CS37_SW6}, //F1 - {0, CS36_SW6, CS35_SW6, CS34_SW6}, //F2 - {0, CS33_SW6, CS32_SW6, CS31_SW6}, //F3 - {0, CS30_SW6, CS29_SW6, CS28_SW6}, //F4 - {0, CS27_SW6, CS26_SW6, CS25_SW6}, //F5 - {0, CS24_SW6, CS23_SW6, CS22_SW6}, //F6 - {0, CS21_SW6, CS20_SW6, CS19_SW6}, //F7 - {0, CS18_SW6, CS17_SW6, CS16_SW6}, //F8 - {0, CS15_SW6, CS14_SW6, CS13_SW6}, //F9 - {0, CS12_SW6, CS11_SW6, CS10_SW6}, //F10 - {0, CS9_SW6 , CS8_SW6 , CS7_SW6 }, //F11 - {0, CS6_SW6 , CS5_SW6 , CS4_SW6 }, //F12 - {0, CS3_SW6 , CS2_SW6 , CS1_SW6 }, //F13 - - {0, CS39_SW7, CS38_SW7, CS37_SW7}, //G1 - {0, CS36_SW7, CS35_SW7, CS34_SW7}, //G2 - {0, CS33_SW7, CS32_SW7, CS31_SW7}, //G3 - {0, CS30_SW7, CS29_SW7, CS28_SW7}, //G4 - {0, CS27_SW7, CS26_SW7, CS25_SW7}, //G5 - {0, CS24_SW7, CS23_SW7, CS22_SW7}, //G6 - {0, CS21_SW7, CS20_SW7, CS19_SW7}, //G7 - {0, CS18_SW7, CS17_SW7, CS16_SW7}, //G8 - {0, CS15_SW7, CS14_SW7, CS13_SW7}, //G9 - {0, CS12_SW7, CS11_SW7, CS10_SW7}, //G10 - {0, CS9_SW7 , CS8_SW7 , CS7_SW7 }, //G11 - {0, CS6_SW7 , CS5_SW7 , CS4_SW7 }, //G12 - {0, CS3_SW7 , CS2_SW7 , CS1_SW7 }, //G13 - - {0, CS39_SW8, CS38_SW8, CS37_SW8}, //H1 - {0, CS36_SW8, CS35_SW8, CS34_SW8}, //H2 - {0, CS33_SW8, CS32_SW8, CS31_SW8}, //H3 - {0, CS30_SW8, CS29_SW8, CS28_SW8}, //H4 - {0, CS27_SW8, CS26_SW8, CS25_SW8}, //H5 - {0, CS24_SW8, CS23_SW8, CS22_SW8}, //H6 - {0, CS21_SW8, CS20_SW8, CS19_SW8}, //H7 - {0, CS18_SW8, CS17_SW8, CS16_SW8}, //H8 - {0, CS15_SW8, CS14_SW8, CS13_SW8}, //H9 - {0, CS12_SW8, CS11_SW8, CS10_SW8}, //H10 - {0, CS9_SW8 , CS8_SW8 , CS7_SW8 }, //H11 - {0, CS6_SW8 , CS5_SW8 , CS4_SW8 }, //H12 - {0, CS3_SW8 , CS2_SW8 , CS1_SW8 }, //H13 - - {0, CS39_SW9, CS38_SW9, CS37_SW9}, //I1 - {0, CS36_SW9, CS35_SW9, CS34_SW9}, //I2 - {0, CS33_SW9, CS32_SW9, CS31_SW9}, //I3 - {0, CS30_SW9, CS29_SW9, CS28_SW9}, //I4 - {0, CS27_SW9, CS26_SW9, CS25_SW9}, //I5 - {0, CS24_SW9, CS23_SW9, CS22_SW9}, //I6 - {0, CS21_SW9, CS20_SW9, CS19_SW9}, //I7 - {0, CS18_SW9, CS17_SW9, CS16_SW9}, //I8 - {0, CS15_SW9, CS14_SW9, CS13_SW9}, //I9 - {0, CS12_SW9, CS11_SW9, CS10_SW9}, //I10 - {0, CS9_SW9 , CS8_SW9 , CS7_SW9 }, //I11 - {0, CS6_SW9 , CS5_SW9 , CS4_SW9 }, //I12 - {0, CS3_SW9 , CS2_SW9 , CS1_SW9 } //I13 -}; - -__attribute__ ((weak)) -led_config_t g_led_config = { { - { -1+00+3 , NO_LED, -1+26+3 , -1+39+3 , -1+52+3 , -1+65+3 , -1+78+3 , -1+91+3 , -1+104+3 , -1+00+1 , -1+13+1 , -1+26+1 , -1+39+1 , -1+52+1 , -1+65+1 , -1+78+1 , -1+91+1 }, - { -1+00+4 , -1+13+4 , -1+26+4 , -1+39+4 , -1+52+4 , -1+65+4 , -1+78+4 , -1+91+4 , -1+104+4 , -1+00+2 , -1+13+2 , -1+26+2 , -1+39+2 , -1+52+2 , -1+65+2 , -1+78+2 , -1+91+2 }, - { -1+00+6 , -1+13+6 , -1+26+6 , -1+39+6 , -1+52+6 , -1+65+6 , -1+78+6 , -1+91+6 , -1+104+6 , -1+00+5 , -1+13+5 , -1+26+5 , -1+39+5 , -1+52+5 , -1+65+5 , -1+78+5 , -1+91+6 }, - { -1+00+8 , -1+13+8 , -1+26+8 , -1+39+8 , -1+52+8 , -1+65+8 , -1+78+8 , -1+91+8 , -1+104+8 , -1+00+7 , -1+13+7 , -1+26+7 , NO_LED , -1+52+7 , NO_LED , NO_LED , NO_LED }, - { -1+00+11, -1+13+11, -1+26+11, -1+39+11, -1+52+11, -1+65+11, -1+78+11, -1+91+11, -1+104+11, -1+00+10, -1+13+10, NO_LED , -1+52+10, NO_LED , NO_LED , -1+78+10, NO_LED }, - { -1+00+9 , -1+13+9 , -1+26+9 , NO_LED , NO_LED , -1+65+9 , NO_LED , NO_LED , NO_LED , NO_LED , -1+13+12, NO_LED , -1+39+12, -1+52+12, -1+65+12, -1+78+12, -1+91+12} -}, { - {123, 0}, {117, 15}, {0 , 0}, {0 , 15}, {123, 27}, {3 , 27}, {127, 40}, {5 , 40}, {2 , 64}, {133, 52}, {8 , 52}, {131, 64}, {255,255}, - {143, 0}, {130, 15}, {255,255}, {13 , 15}, {136, 27}, {19 , 27}, {140, 40}, {23 , 40}, {18 , 64}, {146, 52}, {29 , 52}, {148, 64}, {255,255}, - {156, 0}, {143, 15}, {26 , 0}, {26 , 15}, {149, 27}, {32 , 27}, {153, 40}, {36 , 40}, {34 , 64}, {255,255}, {42 , 52}, {255,255}, {255,255}, - {169, 0}, {156, 15}, {39 , 0}, {39 , 15}, {162, 27}, {45 , 27}, {255,255}, {49 , 40}, {255,255}, {255,255}, {55 , 52}, {164, 64}, {255,255}, - {182, 0}, {175, 15}, {52 , 0}, {52 , 15}, {179, 27}, {58 , 27}, {174, 40}, {62 , 40}, {255,255}, {170, 52}, {68 , 52}, {180, 64}, {255,255}, - {198, 0}, {198, 15}, {65 , 0}, {65 , 15}, {198, 27}, {71 , 27}, {255,255}, {75 , 40}, {83 , 64}, {255,255}, {81 , 52}, {198, 64}, {255,255}, - {211, 0}, {211, 15}, {84 , 0}, {78 , 15}, {211, 27}, {84 , 27}, {255,255}, {88 , 40}, {255,255}, {211, 52}, {94 , 52}, {211, 64}, {255,255}, - {224, 0}, {224, 15}, {97 , 0}, {91 , 15}, {224, 27}, {97 , 27}, {255,255}, {101, 40}, {255,255}, {255,255}, {107, 52}, {224, 64}, {255,255}, - {255,255}, {255,255}, {110, 0}, {104, 15}, {255,255}, {110, 27}, {255,255}, {114, 40}, {255,255}, {255,255}, {120, 52}, {255,255}, {255,255} -}, { - 1, 4, 1, 1, 4, 1, 4, 1, 1, 4, 1, 4, 4, //0-12 - 1, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 1, 4, //13-25 - 1, 4, 1, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, //26-38 - 1, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, //39-51 - 1, 1, 1, 4, 1, 4, 1, 4, 4, 1, 4, 1, 4, //52-64 - 1, 1, 1, 4, 1, 4, 4, 4, 1, 4, 4, 1, 4, //65-77 - 1, 1, 1, 4, 1, 4, 4, 4, 4, 1, 4, 1, 4, //78-90 - 1, 1, 1, 4, 1, 4, 4, 4, 4, 4, 4, 1, 4, //91-103 - 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 //104-116 -} }; - -static void init(void) { - i2c_init(); - IS31FL3741_init(DRIVER_ADDR_1); - for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { - bool enabled = !( ( index == -1+0+13) || //A13 - ( index == -1+13+3) || //B3 - ( index == -1+13+13) || //B13 - ( index == -1+26+10) || //C10 - ( index == -1+26+12) || //C12 - ( index == -1+26+13) || //C13 - ( index == -1+39+7) || //D7 - ( index == -1+39+9) || //D9 - ( index == -1+39+10) || //D10 - ( index == -1+39+13) || //D13 - ( index == -1+52+9) || //E9 - ( index == -1+52+13) || //E13 - ( index == -1+65+7) || //F7 - ( index == -1+65+10) || //F10 - ( index == -1+65+13) || //F13 - ( index == -1+78+7) || //G7 - ( index == -1+78+9) || //G9 - ( index == -1+78+13) || //G13 - ( index == -1+91+7) || //H7 - ( index == -1+91+9) || //H9 - ( index == -1+91+10) || //H10 - ( index == -1+91+13) || //H13 - ( index == -1+104+1) || //I1 - ( index == -1+104+2) || //I2 - ( index == -1+104+5) || //I5 - ( index == -1+104+7) || //I7 - ( index == -1+104+9) || //I9 - ( index == -1+104+10) || //I10 - ( index == -1+104+12) || //I12 - ( index == -1+104+13) //I13 - ); - IS31FL3741_set_led_control_register(index, enabled, enabled, enabled); - } - IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); -} - -static void flush(void) { - IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, 0); - // Just for reference. Only first driver is used? - // IS31FL3741_update_pwm_buffers(DRIVER_ADDR_2, 1); -} - -const rgb_matrix_driver_t rgb_matrix_driver = { - .init = init, - .flush = flush, - .set_color = IS31FL3741_set_color, - .set_color_all = IS31FL3741_set_color_all -}; -#endif diff --git a/keyboards/xelus/pachi/rgb/rgb.h b/keyboards/xelus/pachi/rgb/rgb.h index 894519ebe2..36ca2937a6 100644 --- a/keyboards/xelus/pachi/rgb/rgb.h +++ b/keyboards/xelus/pachi/rgb/rgb.h @@ -17,20 +17,8 @@ #include "quantum.h" -#define ____ KC_NO - -#define LAYOUT_ansi_tsangan( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K412, K415, \ - K500, K501, K502, K505, K510, K512, K513, K514, K515, K516 \ -) { \ - { K000, ____, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, ____, K313, ____, ____, ____ }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, ____, K412, ____, ____, K415, ____ }, \ - { K500, K501, K502, ____, ____, K505, ____, ____, ____, ____, K510, ____, K512, K513, K514, K515, K516 } \ -} +#if defined(KEYBOARD_xelus_pachi_rgb_rev1) + #include "rev1.h" +#elif defined(KEYBOARD_xelus_pachi_rgb_rev2) + #include "rev2.h" +#endif |