diff options
466 files changed, 4996 insertions, 6691 deletions
diff --git a/build_test.mk b/build_test.mk index 136a0455f0..ec6699b4ea 100644 --- a/build_test.mk +++ b/build_test.mk @@ -43,6 +43,7 @@ all: elf VPATH += $(COMMON_VPATH) PLATFORM:=TEST PLATFORM_KEY:=test +BOOTLOADER_TYPE:=none ifeq ($(strip $(DEBUG)), 1) CONSOLE_ENABLE = yes diff --git a/builddefs/bootloader.mk b/builddefs/bootloader.mk index ccb92392d9..470febc346 100644 --- a/builddefs/bootloader.mk +++ b/builddefs/bootloader.mk @@ -30,6 +30,7 @@ # bootloadhid HIDBootFlash compatible (ATmega32A) # usbasploader USBaspLoader (ATmega328P) # ARM: +# halfkay PJRC Teensy # kiibohd Input:Club Kiibohd bootloader (only used on their boards) # stm32duino STM32Duino (STM32F103x8) # stm32-dfu STM32 USB DFU in ROM @@ -43,6 +44,8 @@ ifeq ($(strip $(BOOTLOADER)), atmel-dfu) OPT_DEFS += -DBOOTLOADER_ATMEL_DFU OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE = 4096 endif @@ -53,6 +56,8 @@ endif ifeq ($(strip $(BOOTLOADER)), lufa-dfu) OPT_DEFS += -DBOOTLOADER_LUFA_DFU OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE ?= 4096 endif @@ -63,6 +68,8 @@ endif ifeq ($(strip $(BOOTLOADER)), qmk-dfu) OPT_DEFS += -DBOOTLOADER_QMK_DFU OPT_DEFS += -DBOOTLOADER_DFU + BOOTLOADER_TYPE = dfu + ifneq (,$(filter $(MCU), at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647)) BOOTLOADER_SIZE ?= 4096 endif @@ -73,10 +80,14 @@ endif ifeq ($(strip $(BOOTLOADER)), qmk-hid) OPT_DEFS += -DBOOTLOADER_QMK_HID OPT_DEFS += -DBOOTLOADER_HID + BOOTLOADER_TYPE = dfu + BOOTLOADER_SIZE ?= 4096 endif ifeq ($(strip $(BOOTLOADER)), halfkay) OPT_DEFS += -DBOOTLOADER_HALFKAY + BOOTLOADER_TYPE = halfkay + ifeq ($(strip $(MCU)), atmega32u4) BOOTLOADER_SIZE = 512 endif @@ -86,18 +97,26 @@ ifeq ($(strip $(BOOTLOADER)), halfkay) endif ifeq ($(strip $(BOOTLOADER)), caterina) OPT_DEFS += -DBOOTLOADER_CATERINA + BOOTLOADER_TYPE = caterina + BOOTLOADER_SIZE = 4096 endif ifneq (,$(filter $(BOOTLOADER), bootloadhid bootloadHID)) OPT_DEFS += -DBOOTLOADER_BOOTLOADHID + BOOTLOADER_TYPE = bootloadhid + BOOTLOADER_SIZE = 4096 endif ifneq (,$(filter $(BOOTLOADER), usbasploader USBasp)) OPT_DEFS += -DBOOTLOADER_USBASP + BOOTLOADER_TYPE = usbasploader + BOOTLOADER_SIZE = 4096 endif ifeq ($(strip $(BOOTLOADER)), lufa-ms) OPT_DEFS += -DBOOTLOADER_MS + BOOTLOADER_TYPE = dfu + BOOTLOADER_SIZE ?= 8192 FIRMWARE_FORMAT = bin cpfirmware: lufa_warning @@ -115,6 +134,7 @@ endif ifeq ($(strip $(BOOTLOADER)), stm32-dfu) OPT_DEFS += -DBOOTLOADER_STM32_DFU + BOOTLOADER_TYPE = stm32_dfu # Options to pass to dfu-util when flashing DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave @@ -122,6 +142,7 @@ ifeq ($(strip $(BOOTLOADER)), stm32-dfu) endif ifeq ($(strip $(BOOTLOADER)), apm32-dfu) OPT_DEFS += -DBOOTLOADER_APM32_DFU + BOOTLOADER_TYPE = stm32_dfu # Options to pass to dfu-util when flashing DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave @@ -129,6 +150,7 @@ ifeq ($(strip $(BOOTLOADER)), apm32-dfu) endif ifeq ($(strip $(BOOTLOADER)), gd32v-dfu) OPT_DEFS += -DBOOTLOADER_GD32V_DFU + BOOTLOADER_TYPE = gd32v_dfu # Options to pass to dfu-util when flashing DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave @@ -136,6 +158,8 @@ ifeq ($(strip $(BOOTLOADER)), gd32v-dfu) endif ifeq ($(strip $(BOOTLOADER)), kiibohd) OPT_DEFS += -DBOOTLOADER_KIIBOHD + BOOTLOADER_TYPE = kiibohd + ifeq ($(strip $(MCU_ORIG)), MK20DX128) MCU_LDSCRIPT = MK20DX128BLDR4 endif @@ -151,8 +175,7 @@ ifeq ($(strip $(BOOTLOADER)), stm32duino) OPT_DEFS += -DBOOTLOADER_STM32DUINO MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader BOARD = STM32_F103_STM32DUINO - # STM32F103 does NOT have an USB bootloader in ROM (only serial), so setting anything here does not make much sense - STM32_BOOTLOADER_ADDRESS = 0x80000000 + BOOTLOADER_TYPE = stm32duino # Options to pass to dfu-util when flashing DFU_ARGS = -d 1EAF:0003 -a 2 -R @@ -160,4 +183,17 @@ ifeq ($(strip $(BOOTLOADER)), stm32duino) endif ifeq ($(strip $(BOOTLOADER)), tinyuf2) OPT_DEFS += -DBOOTLOADER_TINYUF2 + BOOTLOADER_TYPE = tinyuf2 +endif +ifeq ($(strip $(BOOTLOADER)), halfkay) + OPT_DEFS += -DBOOTLOADER_HALFKAY + BOOTLOADER_TYPE = halfkay +endif +ifeq ($(strip $(BOOTLOADER)), md-boot) + OPT_DEFS += -DBOOTLOADER_MD_BOOT + BOOTLOADER_TYPE = md_boot +endif + +ifeq ($(strip $(BOOTLOADER_TYPE)),) + BOOTLOADER_TYPE = none endif diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk index 46d34aabe4..3a5768de73 100644 --- a/builddefs/mcu_selection.mk +++ b/builddefs/mcu_selection.mk @@ -143,6 +143,9 @@ ifneq ($(findstring STM32F042, $(MCU)),) # This ensures that the EEPROM page buffer fits into RAM USE_PROCESS_STACKSIZE = 0x600 USE_EXCEPTIONS_STACKSIZE = 0x300 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC400 endif ifneq ($(findstring STM32F072, $(MCU)),) @@ -175,6 +178,9 @@ ifneq ($(findstring STM32F072, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32F0 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFFC800 endif ifneq ($(findstring STM32F103, $(MCU)),) @@ -239,6 +245,9 @@ ifneq ($(findstring STM32F303, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32F3 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFFD800 endif ifneq ($(findstring STM32F401, $(MCU)),) @@ -276,6 +285,9 @@ ifneq ($(findstring STM32F401, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32F4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq ($(findstring STM32F405, $(MCU)),) @@ -308,6 +320,9 @@ ifneq ($(findstring STM32F405, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32F4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq ($(findstring STM32F407, $(MCU)),) @@ -340,6 +355,9 @@ ifneq ($(findstring STM32F407, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32F4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq ($(findstring STM32F411, $(MCU)),) @@ -377,6 +395,9 @@ ifneq ($(findstring STM32F411, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32F4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq ($(findstring STM32F446, $(MCU)),) @@ -406,6 +427,9 @@ ifneq ($(findstring STM32F446, $(MCU)),) BOARD ?= GENERIC_STM32_F446XE USE_FPU ?= yes + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq ($(findstring STM32G431, $(MCU)),) @@ -438,6 +462,9 @@ ifneq ($(findstring STM32G431, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32G4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq ($(findstring STM32G474, $(MCU)),) @@ -470,6 +497,9 @@ ifneq ($(findstring STM32G474, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32G4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq (,$(filter $(MCU),STM32L433 STM32L443)) @@ -504,6 +534,9 @@ ifneq (,$(filter $(MCU),STM32L433 STM32L443)) # UF2 settings UF2_FAMILY ?= STM32L4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq (,$(filter $(MCU),STM32L412 STM32L422)) @@ -538,6 +571,9 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) # UF2 settings UF2_FAMILY ?= STM32L4 + + # Bootloader address for STM32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFF0000 endif ifneq ($(findstring WB32F3G71, $(MCU)),) @@ -567,6 +603,10 @@ ifneq ($(findstring WB32F3G71, $(MCU)),) BOARD ?= GENERIC_WB32_F3G71XX USE_FPU ?= no + + # Bootloader address for WB32 DFU + STM32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 + WB32_BOOTLOADER_ADDRESS ?= 0x1FFFE000 endif ifneq ($(findstring GD32VF103, $(MCU)),) diff --git a/builddefs/message.mk b/builddefs/message.mk index cb4ef43719..1187491452 100644 --- a/builddefs/message.mk +++ b/builddefs/message.mk @@ -87,6 +87,7 @@ define GENERATE_MSG_AVAILABLE_KEYMAPS endef MSG_AVAILABLE_KEYMAPS = $(eval $(call GENERATE_MSG_AVAILABLE_KEYMAPS))$(MSG_AVAILABLE_KEYMAPS_ACTUAL) +MSG_BOOTLOADER_NOT_FOUND_BASE = Bootloader not found. Make sure the board is in bootloader mode. See https://docs.qmk.fm/\#/newbs_flashing\n MSG_CHECK_FILESIZE = Checking file size of $(TARGET).$(FIRMWARE_FORMAT) MSG_CHECK_FILESIZE_SKIPPED = (Firmware size check does not yet support $(MCU_ORIG); skipping) MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE) ($(OVER_SIZE) bytes over)\n @@ -97,6 +98,6 @@ MSG_PYTHON_MISSING = $(ERROR_COLOR)ERROR:$(NO_COLOR) Cannot run \"qmk hello\"!\n Please run $(BOLD)qmk setup$(NO_COLOR) to install all the dependencies QMK requires.\n\n MSG_FLASH_BOOTLOADER = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's bootloader is not specified or is not supported by the \":flash\" target at this time.\n\n MSG_FLASH_ARCH = $(WARN_COLOR)WARNING:$(NO_COLOR) This board's architecture is not supported by the \":flash\" target at this time.\n\n -MSG_BOOTLOADER_NOT_FOUND = $(ERROR_COLOR)ERROR:$(NO_COLOR) Bootloader not found. Trying again in 5s (Ctrl+C to cancel)\n +MSG_BOOTLOADER_NOT_FOUND = $(ERROR_COLOR)ERROR:$(NO_COLOR) $(MSG_BOOTLOADER_NOT_FOUND_BASE) Trying again in 5s (Ctrl+C to cancel)\n BOOTLOADER_RETRY_TIME ?= 0.5 -MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY = Bootloader not found. Trying again every $(BOOTLOADER_RETRY_TIME)s (Ctrl+C to cancel) +MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY = $(MSG_BOOTLOADER_NOT_FOUND_BASE) Trying again every $(BOOTLOADER_RETRY_TIME)s (Ctrl+C to cancel) diff --git a/common_features.mk b/common_features.mk index 8c593024f0..5cde023d10 100644 --- a/common_features.mk +++ b/common_features.mk @@ -356,7 +356,7 @@ endif ifeq ($(strip $(PRINTING_ENABLE)), yes) OPT_DEFS += -DPRINTING_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c - SRC += $(TMK_DIR)/protocol/serial_uart.c + QUANTUM_LIB_SRC += uart.c endif VARIABLE_TRACE ?= no @@ -604,6 +604,7 @@ ifeq ($(strip $(UNICODE_ENABLE)), yes) endif ifeq ($(strip $(UNICODE_COMMON)), yes) + OPT_DEFS += -DUNICODE_COMMON_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c endif @@ -719,6 +720,7 @@ ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) ifeq ($(strip $(BLUETOOTH_DRIVER)), RN42) OPT_DEFS += -DMODULE_RN42 - SRC += $(TMK_DIR)/protocol/serial_uart.c + SRC += $(DRIVER_PATH)/bluetooth/rn42.c + QUANTUM_LIB_SRC += uart.c endif endif diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 308f9b782b..94bbbe7e85 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -57,7 +57,7 @@ }, "bootloader": { "type": "string", - "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"], + "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "md-boot", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"], }, "bootloader_instructions": { "type": "string", @@ -69,7 +69,7 @@ "properties": { "debounce_type": { "type": "string", - "enum": ["custom", "eager_pk", "eager_pr", "sym_defer_pk", "sym_eager_pk"] + "enum": ["custom", "eager_pk", "eager_pr", "sym_defer_pk", "sym_defer_pr", "sym_eager_pk"] }, "firmware_format": { "type": "string", diff --git a/docs/ChangeLog/20220226/PR15304.md b/docs/ChangeLog/20220226/PR15304.md new file mode 100644 index 0000000000..3cdb40db10 --- /dev/null +++ b/docs/ChangeLog/20220226/PR15304.md @@ -0,0 +1,13 @@ +### Split Common core now supports Pointing Devices ([#15304](https://github.com/qmk/qmk_firmware/pull/15304)) + +Pointing devices can now be shared across a split keyboard with support for a single pointing device or a pointing device on each side. + +This feature can be enabled with `#define SPLIT_POINTING_ENABLE` and one of the following options: + +| Setting | Description | +|---------------------------|------------------------------------| +|`POINTING_DEVICE_LEFT` | Pointing device on the left side | +|`POINTING_DEVICE_RIGHT` | Pointing device on the right side | +|`POINTING_DEVICE_COMBINED` | Pointing device on both sides | + +See the [Pointing Device](../feature_pointing_device.md) documentation for further configuration options. diff --git a/docs/feature_combo.md b/docs/feature_combo.md index 47128c431b..c0e10f09d5 100644 --- a/docs/feature_combo.md +++ b/docs/feature_combo.md @@ -141,10 +141,13 @@ Processing combos has two buffers, one for the key presses, another for the comb ## Modifier Combos If a combo resolves to a Modifier, the window for processing the combo can be extended independently from normal combos. By default, this is disabled but can be enabled with `#define COMBO_MUST_HOLD_MODS`, and the time window can be configured with `#define COMBO_HOLD_TERM 150` (default: `TAPPING_TERM`). With `COMBO_MUST_HOLD_MODS`, you cannot tap the combo any more which makes the combo less prone to misfires. -## Per Combo Timing, Holding and Tapping -For each combo, it is possible to configure the time window it has to pressed in, if it needs to be held down, or if it needs to be tapped. +## Strict key press order +By defining `COMBO_MUST_PRESS_IN_ORDER` combos only activate when the keys are pressed in the same order as they are defined in the key array. -For example, tap-only combos are useful if any (or all) of the underlying keys is a Mod-Tap or a Layer-Tap key. When you tap the combo, you get the combo result. When you press the combo and hold it down, the combo doesn't actually activate. Instead the keys are processed separately as if the combo wasn't even there. +## Per Combo Timing, Holding, Tapping and Key Press Order +For each combo, it is possible to configure the time window it has to pressed in, if it needs to be held down, if it needs to be tapped, or if its keys need to be pressed in order. + +For example, tap-only combos are useful if any (or all) of the underlying keys are mod-tap or layer-tap keys. When you tap the combo, you get the combo result. When you press the combo and hold it down, the combo doesn't activate. Instead the keys are processed separately as if the combo wasn't even there. In order to use these features, the following configuration options and functions need to be defined. Coming up with useful timings and configuration is left as an exercise for the reader. @@ -153,6 +156,7 @@ In order to use these features, the following configuration options and function | `COMBO_TERM_PER_COMBO` | uint16_t get_combo_term(uint16_t index, combo_t \*combo) | Optional per-combo timeout window. (default: `COMBO_TERM`) | | `COMBO_MUST_HOLD_PER_COMBO` | bool get_combo_must_hold(uint16_t index, combo_t \*combo) | Controls if a given combo should fire immediately on tap or if it needs to be held. (default: `false`) | | `COMBO_MUST_TAP_PER_COMBO` | bool get_combo_must_tap(uint16_t index, combo_t \*combo) | Controls if a given combo should fire only if tapped within `COMBO_HOLD_TERM`. (default: `false`) | +| `COMBO_MUST_PRESS_IN_ORDER_PER_COMBO` | bool get_combo_must_press_in_order(uint16_t index, combo_t \*combo) | Controls if a given combo should fire only if its keys are pressed in order. (default: `true`) | Examples: ```c @@ -216,6 +220,38 @@ bool get_combo_must_tap(uint16_t index, combo_t *combo) { return false; } + +bool get_combo_must_press_in_order(uint16_t combo_index, combo_t *combo) { + switch (combo_index) { + /* List combos here that you want to only activate if their keys + * are pressed in the same order as they are defined in the combo's key + * array. */ + case COMBO_NAME_HERE: + return true; + default: + return false; + } +} +``` + +## Generic hook to (dis)allow a combo activation + +By defining `COMBO_SHOULD_TRIGGER` and its companying function `bool combo_should_trigger(uint16_t combo_index, combo_t *combo, uint16_t keycode, keyrecord_t *record)` you can block or allow combos to activate on the conditions of your choice. +For example, you could disallow some combos on the base layer and allow them on another. Or disable combos on the home row when a timer is running. + +Examples: +```c +bool combo_should_trigger(uint16_t combo_index, combo_t *combo, uint16_t keycode, keyrecord_t *record) { + /* Disable combo `SOME_COMBO` on layer `_LAYER_A` */ + switch (combo_index) { + case SOME_COMBO: + if (layer_state_is(_LAYER_A)) { + return false; + } + } + + return true; +} ``` ## Variable Length Combos diff --git a/docs/feature_debounce_type.md b/docs/feature_debounce_type.md index f37a785b1e..9cd736a24a 100644 --- a/docs/feature_debounce_type.md +++ b/docs/feature_debounce_type.md @@ -116,6 +116,7 @@ Where name of algorithm is one of: For use in keyboards where refreshing ```NUM_KEYS``` 8-bit counters is computationally expensive / low scan rate, and fingers usually only hit one row at a time. This could be appropriate for the ErgoDox models; the matrix is rotated 90°, and hence its "rows" are really columns, and each finger only hits a single "row" at a time in normal use. * ```sym_eager_pk``` - debouncing per key. On any state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key +* ```sym_defer_pr``` - debouncing per row. On any state change, a per-row timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that row, the entire row is pushed. Can improve responsiveness over `sym_defer_g` while being less susceptible than per-key debouncers to noise. * ```sym_defer_pk``` - debouncing per key. On any state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key status change is pushed. * ```asym_eager_defer_pk``` - debouncing per key. On a key-down state change, response is immediate, followed by ```DEBOUNCE``` milliseconds of no further input for that key. On a key-up state change, a per-key timer is set. When ```DEBOUNCE``` milliseconds of no changes have occurred on that key, the key-up status change is pushed. diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index c8c74cb8f0..bbdf7e122c 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -167,7 +167,7 @@ List of waveform sequences from the datasheet: ``` #define DRV_GREETING *sequence name or number* ``` -If haptic feedback is enabled, the keyboard will vibrate to a specific sqeuence during startup. That can be selected using the following define: +If haptic feedback is enabled, the keyboard will vibrate to a specific sequence during startup. That can be selected using the following define: ``` #define DRV_MODE_DEFAULT *sequence name or number* @@ -207,4 +207,4 @@ With the entry of `#define NO_HAPTIC_LOCKKEYS` in config.h, none of the followin With the entry of `#define NO_HAPTIC_NAV` in config.h, none of the following keys will trigger a feedback: Print Screen, Pause, Insert, Delete, Page Down, Page Up, Left Arrow, Up Arrow, Right Arrow, Down Arrow, End, Home. ### NO_HAPTIC_NUMERIC -With the entry of `#define NO_HAPTIC_NUMERIC` in config.h, none of the following keys between 0 and 9 (KC_1 ... KC_0) will trigger a feedback.
\ No newline at end of file +With the entry of `#define NO_HAPTIC_NUMERIC` in config.h, none of the following keys between 0 and 9 (KC_1 ... KC_0) will trigger a feedback. diff --git a/docs/feature_key_lock.md b/docs/feature_key_lock.md index 8e6e29f0e6..7681394229 100644 --- a/docs/feature_key_lock.md +++ b/docs/feature_key_lock.md @@ -19,4 +19,5 @@ First, enable Key Lock by setting `KEY_LOCK_ENABLE = yes` in your `rules.mk`. Th Key Lock is only able to hold standard action keys and [One Shot modifier](one_shot_keys.md) keys (for example, if you have your Shift defined as `OSM(KC_LSFT)`). This does not include any of the QMK special functions (except One Shot modifiers), or shifted versions of keys such as `KC_LPRN`. If it's in the [Basic Keycodes](keycodes_basic.md) list, it can be held. -Switching layers will not cancel the Key Lock. +Switching layers will not cancel the Key Lock. The Key Lock can be cancelled by calling the `cancel_key_lock()` function. + diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index 098a787ed8..b1015f3cd3 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -30,7 +30,7 @@ The ADNS 5050 sensor uses a serial type protocol for communication, and requires The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI. -### ADSN 9800 Sensor +### ADNS 9800 Sensor To use the ADNS 9800 sensor, add this to your `rules.mk` @@ -69,7 +69,7 @@ The Analog Joystick is an analog (ADC) driven sensor. There are a variety of jo |`ANALOG_JOYSTICK_AXIS_MAX` | (Optional) Sets the upper range to be considered movement. | `1023` | |`ANALOG_JOYSTICK_SPEED_REGULATOR` | (Optional) The divisor used to slow down movement. (lower makes it faster) | `20` | |`ANALOG_JOYSTICK_READ_INTERVAL` | (Optional) The interval in milliseconds between reads. | `10` | -|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maxiumum value used for motion. | `2` | +|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maximum value used for motion. | `2` | |`ANALOG_JOYSTICK_CLICK_PIN` | (Optional) The pin wired up to the press switch of the analog stick. | _not defined_ | @@ -127,11 +127,10 @@ The Pimoroni Trackball module is a I2C based breakout board with an RGB enable t | Setting | Description | Default | |-------------------------------------|------------------------------------------------------------------------------------|---------| |`PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` | -|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `100` | -|`PIMORONI_TRACKBALL_INTERVAL_MS` | (Optional) The update/read interval for the sensor in milliseconds. | `8` | +|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackball in milliseconds. | `100` | |`PIMORONI_TRACKBALL_SCALE` | (Optional) The multiplier used to generate reports from the sensor. | `5` | |`PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` | -|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | +|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | ### PMW 3360 Sensor @@ -171,14 +170,35 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} ## Common Configuration -| Setting | Description | Default | -|-------------------------------|-----------------------------------------------------------------------|---------------| -|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | -|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | -|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | -|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | -|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | +| Setting | Description | Default | +|----------------------------------|-----------------------------------------------------------------------|-------------------| +|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | +|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | +|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | +|`POINTING_DEVICE_TASK_THROTTLE_MS` | (Optional) Limits the frequency that the sensor is polled for motion. | _not defined_ | + +!> When using `SPLIT_POINTING_ENABLE` the `POINTING_DEVICE_MOTION_PIN` functionality is not supported and would recommend `POINTING_DEVICE_TASK_THROTTLE_MS` be set to `1`. Increasing this value will increase transport performance at the cost of possible mouse responsiveness. + + +## Split Keyboard Configuration + +The following configuration options are only available when using `SPLIT_POINTING_ENABLE` see [data sync options](feature_split_keyboard.md?id=data-sync-options). The rotation and invert `*_RIGHT` options are only used with `POINTING_DEVICE_COMBINED`. If using `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` use the common configuration above to configure your pointing device. + +| Setting | Description | Default | +|----------------------------------------|-----------------------------------------------------------------------|---------------| +|`POINTING_DEVICE_LEFT` | Pointing device on the left side (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_RIGHT` | Pointing device on the right side (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_COMBINED` | Pointing device on both sides (Required - pick one only) | _not defined_ | +|`POINTING_DEVICE_ROTATION_90_RIGHT` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_180_RIGHT` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_270_RIGHT` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +|`POINTING_DEVICE_INVERT_X_RIGHT` | (Optional) Inverts the X axis report. | _not defined_ | +|`POINTING_DEVICE_INVERT_Y_RIGHT` | (Optional) Inverts the Y axis report. | _not defined_ | + +!> If there is a `_RIGHT` configuration option or callback, the [common configuration](feature_pointing_device.md?id=common-configuration) option will work for the left. For correct left/right detection you should setup a [handedness option](feature_split_keyboard?id=setting-handedness), `EE_HANDS` is usually a good option for an existing board that doesn't do handedness by hardware. ## Callbacks and Functions @@ -188,7 +208,7 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} | `pointing_device_init_kb(void)` | Callback to allow for keyboard level initialization. Useful for additional hardware sensors. | | `pointing_device_init_user(void)` | Callback to allow for user level initialization. Useful for additional hardware sensors. | | `pointing_device_task_kb(mouse_report)` | Callback that sends sensor data, so keyboard code can intercept and modify the data. Returns a mouse report. | -| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user coe can intercept and modify the data. Returns a mouse report. | +| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user code can intercept and modify the data. Returns a mouse report. | | `pointing_device_handle_buttons(buttons, pressed, button)` | Callback to handle hardware button presses. Returns a `uint8_t`. | | `pointing_device_get_cpi(void)` | Gets the current CPI/DPI setting from the sensor, if supported. | | `pointing_device_set_cpi(uint16_t)` | Sets the CPI/DPI, if supported. | @@ -196,6 +216,21 @@ void pointing_device_driver_set_cpi(uint16_t cpi) {} | `pointing_device_set_report(mouse_report)` | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function. | | `pointing_device_send(void)` | Sends the current mouse report to the host system. Function can be replaced. | | `has_mouse_report_changed(old, new)` | Compares the old and new `mouse_report_t` data and returns true only if it has changed. | +| `pointing_device_adjust_by_defines(mouse_report)` | Applies rotations and invert configurations to a raw mouse report. | + + +## Split Keyboard Callbacks and Functions + +The combined functions below are only available when using `SPLIT_POINTING_ENABLE` and `POINTING_DEVICE_COMBINED`. The 2 callbacks `pointing_device_task_combined_*` replace the single sided equivalents above. See the [combined pointing devices example](feature_pointing_device.md?id=combined-pointing-devices) + +| Function | Description | +|-----------------------------------------------------------------|--------------------------------------------------------------------------------------------------------------------------| +| `pointing_device_set_shared_report(mouse_report)` | Sets the shared mouse report to the assigned `mouse_report_t` data structured passed to the function. | +| `pointing_device_set_cpi_on_side(bool, uint16_t)` | Sets the CPI/DPI of one side, if supported. Passing `true` will set the left and `false` the right` | +| `pointing_device_combine_reports(left_report, right_report)` | Returns a combined mouse_report of left_report and right_report (as a `mouse_report_t` data structure) | +| `pointing_device_task_combined_kb(left_report, right_report)` | Callback, so keyboard code can intercept and modify the data. Returns a combined mouse report. | +| `pointing_device_task_combined_user(left_report, right_report)` | Callback, so user code can intercept and modify. Returns a combined mouse report using `pointing_device_combine_reports` | +| `pointing_device_adjust_by_defines_right(mouse_report)` | Applies right side rotations and invert configurations to a raw mouse report. | # Manipulating Mouse Reports @@ -274,3 +309,62 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { ``` This allows you to toggle between scrolling and cursor movement by pressing the DRAG_SCROLL key. + +## Split Examples + +The following examples make use the `SPLIT_POINTING_ENABLE` functionality and show how to manipulate the mouse report for a scrolling mode. + +### Single Pointing Device + +The following example will work with either `POINTING_DEVICE_LEFT` or `POINTING_DEVICE_RIGHT` and enables scrolling mode while on a particular layer. + +```c + +static bool scrolling_mode = false; + +layer_state_t layer_state_set_user(layer_state_t state) { + switch (get_highest_layer(state)) { + case _RAISE: // If we're on the _RAISE layer enable scrolling mode + scrolling_mode = true; + pointing_device_set_cpi(2000); + break; + default: + if (scrolling_mode) { // check if we were scrolling before and set disable if so + scrolling_mode = false; + pointing_device_set_cpi(8000); + } + break; + } + return state; +} + +report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { + if (scrolling_mode) { + mouse_report.h = mouse_report.x; + mouse_report.v = mouse_report.y; + mouse_report.x = 0; + mouse_report.y = 0; + } + return mouse_report; +} +``` + +### Combined Pointing Devices + +The following example requires `POINTING_DEVICE_COMBINED` and sets the left side pointing device to scroll only. + +```c +void keyboard_post_init_user(void) { + pointing_device_set_cpi_on_side(true, 1000); //Set cpi on left side to a low value for slower scrolling. + pointing_device_set_cpi_on_side(false, 8000); //Set cpi on right side to a reasonable value for mousing. +} + +report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) { + left_report.h = left_report.x; + left_report.v = left_report.y; + left_report.x = 0; + left_report.y = 0; + return pointing_device_combine_reports(left_report, right_report); +} +``` +======= diff --git a/docs/feature_split_keyboard.md b/docs/feature_split_keyboard.md index c8ba18beeb..b51593308e 100644 --- a/docs/feature_split_keyboard.md +++ b/docs/feature_split_keyboard.md @@ -266,6 +266,14 @@ This enables transmitting the current OLED on/off status to the slave side of th This enables transmitting the current ST7565 on/off status to the slave side of the split keyboard. The purpose of this feature is to support state (on/off state only) syncing. +```c +#define SPLIT_POINTING_ENABLE +``` + +This enables transmitting the pointing device status to the master side of the split keyboard. The purpose of this feature is to enable use pointing devices on the slave side. + +!> There is additional required configuration for `SPLIT_POINTING_ENABLE` outlined in the [pointing device documentation](feature_pointing_device.md?id=split-keyboard-configuration). + ### Custom data sync between sides :id=custom-data-sync QMK's split transport allows for arbitrary data transactions at both the keyboard and user levels. This is modelled on a remote procedure call, with the master invoking a function on the slave side, with the ability to send data from master to slave, process it slave side, and send data back from slave to master. diff --git a/docs/feature_wpm.md b/docs/feature_wpm.md index 87145c97e3..9f98ef8336 100644 --- a/docs/feature_wpm.md +++ b/docs/feature_wpm.md @@ -16,7 +16,7 @@ For split keyboards using soft serial, the computed WPM score will be available | `WPM_ALLOW_COUNT_REGRESSION` | _Not defined_ | If defined allows the WPM to be decreased when hitting Delete or Backspace | | `WPM_UNFILTERED` | _Not defined_ | If undefined (the default), WPM values will be smoothed to avoid sudden changes in value | | `WPM_SAMPLE_SECONDS` | `5` | This defines how many seconds of typing to average, when calculating WPM | -| `WPM_SAMPLE_PERIODS` | `50` | This defines how many sampling periods to use when calculating WPM | +| `WPM_SAMPLE_PERIODS` | `25` | This defines how many sampling periods to use when calculating WPM | | `WPM_LAUNCH_CONTROL` | _Not defined_ | If defined, WPM values will be calculated using partial buffers when typing begins | 'WPM_UNFILTERED' is potentially useful if you're filtering data in some other way (and also because it reduces the code required for the WPM feature), or if reducing measurement latency to a minimum is important for you. diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md index ccd3f8c74d..e1f1515b71 100644 --- a/docs/internals_gpio_control.md +++ b/docs/internals_gpio_control.md @@ -6,17 +6,19 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This The following functions provide basic control of GPIOs and are found in `platforms/<platform>/gpio.h`. -|Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples | -|------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------| -| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` | -| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` | -| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` | -| `setPinOutput(pin)` | Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` | -| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` | -| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` | -| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` | -| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` | -| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` | +| Function | Description | Old AVR Examples | Old ChibiOS/ARM Examples | +|------------------------------|-----------------------------------------------------|-------------------------------------------------|--------------------------------------------------| +| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` | +| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` | +| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` | +| `setPinOutput(pin)` | Set pin as output (alias of `setPinOutputPushPull`) | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` | +| `setPinOutputPushPull(pin)` | Set pin as output, push/pull mode | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` | +| `setPinOutputOpenDrain(pin)` | Set pin as output, open-drain mode | N/A (Not implemented on AVR) | `palSetLineMode(pin, PAL_MODE_OUTPUT_OPENDRAIN)` | +| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` | +| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` | +| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` | +| `readPin(pin)` | Returns the level of the pin | `_SFR_IO8(pin >> 4) & _BV(pin & 0xF)` | `palReadLine(pin)` | +| `togglePin(pin)` | Invert pin level, assuming it is an output | `PORTB ^= (1<<2)` | `palToggleLine(pin)` | ## Advanced Settings :id=advanced-settings diff --git a/docs/keycodes.md b/docs/keycodes.md index ba06e1b8b6..2ea4fc74e2 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -326,6 +326,7 @@ See also: [Magic Keycodes](keycodes_magic.md) |----------------------------------|---------|--------------------------------------------------------------------------| |`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control | |`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control | +|`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap | |`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control | |`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control | |`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI | diff --git a/docs/keycodes_magic.md b/docs/keycodes_magic.md index 7e1b1a4f62..01eb69168e 100644 --- a/docs/keycodes_magic.md +++ b/docs/keycodes_magic.md @@ -6,6 +6,7 @@ |----------------------------------|---------|--------------------------------------------------------------------------| |`MAGIC_SWAP_CONTROL_CAPSLOCK` |`CL_SWAP`|Swap Caps Lock and Left Control | |`MAGIC_UNSWAP_CONTROL_CAPSLOCK` |`CL_NORM`|Unswap Caps Lock and Left Control | +|`MAGIC_TOGGLE_CONTROL_CAPSLOCK` |`CL_TOGG`|Toggle Caps Lock and Left Control swap | |`MAGIC_CAPSLOCK_TO_CONTROL` |`CL_CTRL`|Treat Caps Lock as Control | |`MAGIC_UNCAPSLOCK_TO_CONTROL` |`CL_CAPS`|Stop treating Caps Lock as Control | |`MAGIC_SWAP_LCTL_LGUI` |`LCG_SWP`|Swap Left Control and GUI | diff --git a/docs/platformdev_chibios_earlyinit.md b/docs/platformdev_chibios_earlyinit.md index eb932bc774..aaa91ba438 100644 --- a/docs/platformdev_chibios_earlyinit.md +++ b/docs/platformdev_chibios_earlyinit.md @@ -17,7 +17,6 @@ As such, if you wish to override this API consider limiting use to writing to lo | `config.h` override | Description | Default | |-----------------------------------------------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|----------| | `#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP` | Whether or not bootloader is to be executed during the early initialisation code of QMK. | `FALSE` | -| `#define STM32_BOOTLOADER_ADDRESS` | Relevant for single-bank STM32 MCUs, signifies the memory address to jump to bootloader. Consult [AN2606](https://www.st.com/content/st_com/en/search.html#q=an2606-t=resources-page=1) for the _System Memory_ address for your MCU. This value should be of the format `0x11111111`. | `<none>` | | `#define STM32_BOOTLOADER_DUAL_BANK` | Relevant for dual-bank STM32 MCUs, signifies that a GPIO is to be toggled in order to enter bootloader mode. | `FALSE` | | `#define STM32_BOOTLOADER_DUAL_BANK_GPIO` | Relevant for dual-bank STM32 MCUs, the pin to toggle when attempting to enter bootloader mode, e.g. `B8` | `<none>` | | `#define STM32_BOOTLOADER_DUAL_BANK_POLARITY` | Relevant for dual-bank STM32 MCUs, the value to set the pin to in order to trigger charging of the RC circuit. e.g. `0` or `1`. | `0` | diff --git a/drivers/bluetooth/rn42.c b/drivers/bluetooth/rn42.c new file mode 100644 index 0000000000..2ef40bb7e0 --- /dev/null +++ b/drivers/bluetooth/rn42.c @@ -0,0 +1,99 @@ +/* Copyright 2021 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "report.h" +#include "uart.h" + +#ifndef RN42_BAUD_RATE +# define RN42_BAUD_RATE 115200 +#endif + +// https://cdn.sparkfun.com/datasheets/Wireless/Bluetooth/bluetooth_cr_UG-v1.0r.pdf#G7.663734 +static inline uint16_t rn42_consumer_usage_to_bitmap(uint16_t usage) { + switch (usage) { + case AC_HOME: + return 0x0001; + case AL_EMAIL: + return 0x0002; + case AC_SEARCH: + return 0x0004; + case AL_KEYBOARD_LAYOUT: + return 0x0008; + case AUDIO_VOL_UP: + return 0x0010; + case AUDIO_VOL_DOWN: + return 0x0020; + case AUDIO_MUTE: + return 0x0040; + case TRANSPORT_PLAY_PAUSE: + return 0x0080; + case TRANSPORT_NEXT_TRACK: + return 0x0100; + case TRANSPORT_PREV_TRACK: + return 0x0200; + case TRANSPORT_STOP: + return 0x0400; + case TRANSPORT_EJECT: + return 0x0800; + case TRANSPORT_FAST_FORWARD: + return 0x1000; + case TRANSPORT_REWIND: + return 0x2000; + case TRANSPORT_STOP_EJECT: + return 0x4000; + case AL_LOCAL_BROWSER: + return 0x8000; + default: + return 0; + } +} + +void rn42_init(void) { uart_init(RN42_BAUD_RATE); } + +void rn42_send_keyboard(report_keyboard_t *report) { + uart_write(0xFD); + uart_write(0x09); + uart_write(0x01); + uart_write(report->mods); + uart_write(0x00); + for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { + uart_write(report->keys[i]); + } +} + +void rn42_send_mouse(report_mouse_t *report) { + uart_write(0xFD); + uart_write(0x00); + uart_write(0x03); + uart_write(report->buttons); + uart_write(report->x); + uart_write(report->y); + uart_write(report->v); // should try sending the wheel v here + uart_write(report->h); // should try sending the wheel h here + uart_write(0x00); +} + +void rn42_send_consumer(uint16_t data) { + static uint16_t last_data = 0; + if (data == last_data) return; + last_data = data; + uint16_t bitmap = rn42_consumer_usage_to_bitmap(data); + uart_write(0xFD); + uart_write(0x03); + uart_write(0x03); + uart_write(bitmap & 0xFF); + uart_write((bitmap >> 8) & 0xFF); +} diff --git a/drivers/bluetooth/rn42.h b/drivers/bluetooth/rn42.h new file mode 100644 index 0000000000..4747759111 --- /dev/null +++ b/drivers/bluetooth/rn42.h @@ -0,0 +1,25 @@ +/* Copyright 2021 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "report.h" + +void rn42_init(void); + +void rn42_send_keyboard(report_keyboard_t *report); + +void rn42_send_mouse(report_mouse_t *report); + +void rn42_send_consumer(uint16_t data); diff --git a/drivers/led/issi/is31fl3733-simple.c b/drivers/led/issi/is31fl3733-simple.c new file mode 100644 index 0000000000..777895bf89 --- /dev/null +++ b/drivers/led/issi/is31fl3733-simple.c @@ -0,0 +1,248 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby + * Copyright 2021 Leo Deng + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "is31fl3733-simple.h" +#include "i2c_master.h" +#include "wait.h" + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 00 <-> GND +// 01 <-> SCL +// 10 <-> SDA +// 11 <-> VCC +// ADDR1 represents A1:A0 of the 7-bit address. +// ADDR2 represents A3:A2 of the 7-bit address. +// The result is: 0b101(ADDR2)(ADDR1) +#define ISSI_ADDR_DEFAULT 0x50 + +#define ISSI_COMMANDREGISTER 0xFD +#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE +#define ISSI_INTERRUPTMASKREGISTER 0xF0 +#define ISSI_INTERRUPTSTATUSREGISTER 0xF1 + +#define ISSI_PAGE_LEDCONTROL 0x00 // PG0 +#define ISSI_PAGE_PWM 0x01 // PG1 +#define ISSI_PAGE_AUTOBREATH 0x02 // PG2 +#define ISSI_PAGE_FUNCTION 0x03 // PG3 + +#define ISSI_REG_CONFIGURATION 0x00 // PG3 +#define ISSI_REG_GLOBALCURRENT 0x01 // PG3 +#define ISSI_REG_RESET 0x11 // PG3 +#define ISSI_REG_SWPULLUP 0x0F // PG3 +#define ISSI_REG_CSPULLUP 0x10 // PG3 + +#ifndef ISSI_TIMEOUT +# define ISSI_TIMEOUT 100 +#endif + +#ifndef ISSI_PERSISTENCE +# define ISSI_PERSISTENCE 0 +#endif + +#ifndef ISSI_PWM_FREQUENCY +# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +#endif + +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the IS31FL3733 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in IS31FL3733_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[LED_DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required[LED_DRIVER_COUNT] = {false}; + +/* There's probably a better way to init this... */ +#if LED_DRIVER_COUNT == 1 +uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}}; +#elif LED_DRIVER_COUNT == 2 +uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}}; +#elif LED_DRIVER_COUNT == 3 +uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}}; +#elif LED_DRIVER_COUNT == 4 +uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}, {0}}; +#endif +bool g_led_control_registers_update_required[LED_DRIVER_COUNT] = {false}; + +bool IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) { + // If the transaction fails function returns false. + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + +#if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) { + return false; + } +#endif + return true; +} + +bool IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) { + // Assumes PG1 is already selected. + // If any of the transactions fails function returns false. + // Transmit PWM registers in 12 transfers of 16 bytes. + // g_twi_transfer_buffer[] is 20 bytes + + // Iterate over the pwm_buffer contents at 16 byte intervals. + for (int i = 0; i < 192; i += 16) { + g_twi_transfer_buffer[0] = i; + // Copy the data from i to i+15. + // Device will auto-increment register for data after the first byte + // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer. + for (int j = 0; j < 16; j++) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + +#if ISSI_PERSISTENCE > 0 + for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) { + return false; + } +#endif + } + return true; +} + +void IS31FL3733_init(uint8_t addr, uint8_t sync) { + // In order to avoid the LEDs being driven with garbage data + // in the LED driver's PWM registers, shutdown is enabled last. + // Set up the mode and other settings, clear the PWM registers, + // then disable software shutdown. + // Sync is passed so set it according to the datasheet. + + // Unlock the command register. + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG0 + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); + // Turn off all LEDs. + for (int i = 0x00; i <= 0x17; i++) { + IS31FL3733_write_register(addr, i, 0x00); + } + + // Unlock the command register. + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG1 + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); + // Set PWM on all LEDs to 0 + // No need to setup Breath registers to PWM as that is the default. + for (int i = 0x00; i <= 0xBF; i++) { + IS31FL3733_write_register(addr, i, 0x00); + } + + // Unlock the command register. + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + + // Select PG3 + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); + // Set global current to maximum. + IS31FL3733_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); + // Disable software shutdown. + IS31FL3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01); + + // Wait 10ms to ensure the device has woken up. + wait_ms(10); +} + +void IS31FL3733_set_value(int index, uint8_t value) { + if (index >= 0 && index < DRIVER_LED_TOTAL) { + is31_led led = g_is31_leds[index]; + + g_pwm_buffer[led.driver][led.v] = value; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void IS31FL3733_set_value_all(uint8_t value) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + IS31FL3733_set_value(i, value); + } +} + +void IS31FL3733_set_led_control_register(uint8_t index, bool value) { + is31_led led = g_is31_leds[index]; + + uint8_t control_register = led.v / 8; + uint8_t bit_value = led.v % 8; + + if (value) { + g_led_control_registers[led.driver][control_register] |= (1 << bit_value); + } else { + g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value); + } + + g_led_control_registers_update_required[led.driver] = true; +} + +void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + // Firstly we need to unlock the command register and select PG1. + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM); + + // If any of the transactions fail we risk writing dirty PG0, + // refresh page 0 just in case. + if (!IS31FL3733_write_pwm_buffer(addr, g_pwm_buffer[index])) { + g_led_control_registers_update_required[index] = true; + } + g_pwm_buffer_update_required[index] = false; + } +} + +void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index) { + if (g_led_control_registers_update_required[index]) { + // Firstly we need to unlock the command register and select PG0 + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5); + IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL); + for (int i = 0; i < 24; i++) { + IS31FL3733_write_register(addr, i, g_led_control_registers[index][i]); + } + g_led_control_registers_update_required[index] = false; + } +} diff --git a/drivers/led/issi/is31fl3733-simple.h b/drivers/led/issi/is31fl3733-simple.h new file mode 100644 index 0000000000..f071db5e40 --- /dev/null +++ b/drivers/led/issi/is31fl3733-simple.h @@ -0,0 +1,260 @@ +/* Copyright 2017 Jason Williams + * Copyright 2018 Jack Humbert + * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby + * Copyright 2021 Leo Deng + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> +#include "progmem.h" + +typedef struct is31_led { + uint8_t driver : 2; + uint8_t v; +} __attribute__((packed)) is31_led; + +extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; + +void IS31FL3733_init(uint8_t addr, uint8_t sync); +bool IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data); +bool IS31FL3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer); + +void IS31FL3733_set_value(int index, uint8_t value); +void IS31FL3733_set_value_all(uint8_t value); + +void IS31FL3733_set_led_control_register(uint8_t index, bool value); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); +void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); + +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL + +#define A_1 0x00 +#define A_2 0x01 +#define A_3 0x02 +#define A_4 0x03 +#define A_5 0x04 +#define A_6 0x05 +#define A_7 0x06 +#define A_8 0x07 +#define A_9 0x08 +#define A_10 0x09 +#define A_11 0x0A +#define A_12 0x0B +#define A_13 0x0C +#define A_14 0x0D +#define A_15 0x0E +#define A_16 0x0F + +#define B_1 0x10 +#define B_2 0x11 +#define B_3 0x12 +#define B_4 0x13 +#define B_5 0x14 +#define B_6 0x15 +#define B_7 0x16 +#define B_8 0x17 +#define B_9 0x18 +#define B_10 0x19 +#define B_11 0x1A +#define B_12 0x1B +#define B_13 0x1C +#define B_14 0x1D +#define B_15 0x1E +#define B_16 0x1F + +#define C_1 0x20 +#define C_2 0x21 +#define C_3 0x22 +#define C_4 0x23 +#define C_5 0x24 +#define C_6 0x25 +#define C_7 0x26 +#define C_8 0x27 +#define C_9 0x28 +#define C_10 0x29 +#define C_11 0x2A +#define C_12 0x2B +#define C_13 0x2C +#define C_14 0x2D +#define C_15 0x2E +#define C_16 0x2F + +#define D_1 0x30 +#define D_2 0x31 +#define D_3 0x32 +#define D_4 0x33 +#define D_5 0x34 +#define D_6 0x35 +#define D_7 0x36 +#define D_8 0x37 +#define D_9 0x38 +#define D_10 0x39 +#define D_11 0x3A +#define D_12 0x3B +#define D_13 0x3C +#define D_14 0x3D +#define D_15 0x3E +#define D_16 0x3F + +#define E_1 0x40 +#define E_2 0x41 +#define E_3 0x42 +#define E_4 0x43 +#define E_5 0x44 +#define E_6 0x45 +#define E_7 0x46 +#define E_8 0x47 +#define E_9 0x48 +#define E_10 0x49 +#define E_11 0x4A +#define E_12 0x4B +#define E_13 0x4C +#define E_14 0x4D +#define E_15 0x4E +#define E_16 0x4F + +#define F_1 0x50 +#define F_2 0x51 +#define F_3 0x52 +#define F_4 0x53 +#define F_5 0x54 +#define F_6 0x55 +#define F_7 0x56 +#define F_8 0x57 +#define F_9 0x58 +#define F_10 0x59 +#define F_11 0x5A +#define F_12 0x5B +#define F_13 0x5C +#define F_14 0x5D +#define F_15 0x5E +#define F_16 0x5F + +#define G_1 0x60 +#define G_2 0x61 +#define G_3 0x62 +#define G_4 0x63 +#define G_5 0x64 +#define G_6 0x65 +#define G_7 0x66 +#define G_8 0x67 +#define G_9 0x68 +#define G_10 0x69 +#define G_11 0x6A +#define G_12 0x6B +#define G_13 0x6C +#define G_14 0x6D +#define G_15 0x6E +#define G_16 0x6F + +#define H_1 0x70 +#define H_2 0x71 +#define H_3 0x72 +#define H_4 0x73 +#define H_5 0x74 +#define H_6 0x75 +#define H_7 0x76 +#define H_8 0x77 +#define H_9 0x78 +#define H_10 0x79 +#define H_11 0x7A +#define H_12 0x7B +#define H_13 0x7C +#define H_14 0x7D +#define H_15 0x7E +#define H_16 0x7F + +#define I_1 0x80 +#define I_2 0x81 +#define I_3 0x82 +#define I_4 0x83 +#define I_5 0x84 +#define I_6 0x85 +#define I_7 0x86 +#define I_8 0x87 +#define I_9 0x88 +#define I_10 0x89 +#define I_11 0x8A +#define I_12 0x8B +#define I_13 0x8C +#define I_14 0x8D +#define I_15 0x8E +#define I_16 0x8F + +#define J_1 0x90 +#define J_2 0x91 +#define J_3 0x92 +#define J_4 0x93 +#define J_5 0x94 +#define J_6 0x95 +#define J_7 0x96 +#define J_8 0x97 +#define J_9 0x98 +#define J_10 0x99 +#define J_11 0x9A +#define J_12 0x9B +#define J_13 0x9C +#define J_14 0x9D +#define J_15 0x9E +#define J_16 0x9F + +#define K_1 0xA0 +#define K_2 0xA1 +#define K_3 0xA2 +#define K_4 0xA3 +#define K_5 0xA4 +#define K_6 0xA5 +#define K_7 0xA6 +#define K_8 0xA7 +#define K_9 0xA8 +#define K_10 0xA9 +#define K_11 0xAA +#define K_12 0xAB +#define K_13 0xAC +#define K_14 0xAD +#define K_15 0xAE +#define K_16 0xAF + +#define L_1 0xB0 +#define L_2 0xB1 +#define L_3 0xB2 +#define L_4 0xB3 +#define L_5 0xB4 +#define L_6 0xB5 +#define L_7 0xB6 +#define L_8 0xB7 +#define L_9 0xB8 +#define L_10 0xB9 +#define L_11 0xBA +#define L_12 0xBB +#define L_13 0xBC +#define L_14 0xBD +#define L_15 0xBE +#define L_16 0xBF diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index c52f991804..425cf9912f 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -154,8 +154,8 @@ void adns9800_init() { } config_adns9800_t adns9800_get_config(void) { - uint8_t config_1 = adns9800_read(REG_Configuration_I); - return (config_adns9800_t){(config_1 & 0xFF) * CPI_STEP}; + uint8_t cpival = adns9800_read(REG_Configuration_I); + return (config_adns9800_t){(cpival & 0xFF) * CPI_STEP}; } void adns9800_set_config(config_adns9800_t config) { @@ -164,8 +164,8 @@ void adns9800_set_config(config_adns9800_t config) { } uint16_t adns9800_get_cpi(void) { - uint8_t config_1 = adns9800_read(REG_Configuration_I); - return (uint16_t){(config_1 & 0xFF) * CPI_STEP}; + uint8_t cpival = adns9800_read(REG_Configuration_I); + return (uint16_t)(cpival & 0xFF) * CPI_STEP; } void adns9800_set_cpi(uint16_t cpi) { @@ -184,7 +184,7 @@ static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { } report_adns9800_t adns9800_get_report(void) { - report_adns9800_t report = {0, 0}; + report_adns9800_t report = {0}; adns9800_spi_start(); diff --git a/drivers/sensors/pimoroni_trackball.c b/drivers/sensors/pimoroni_trackball.c index 7d390056ea..2867e763bc 100644 --- a/drivers/sensors/pimoroni_trackball.c +++ b/drivers/sensors/pimoroni_trackball.c @@ -33,8 +33,24 @@ static uint16_t precision = 128; -float pimoroni_trackball_get_precision(void) { return ((float)precision / 128); } -void pimoroni_trackball_set_precision(float floatprecision) { precision = (floatprecision * 128); } +uint16_t pimoroni_trackball_get_cpi(void) { return (precision * 125); } +/** + * @brief Sets the scaling value for pimoroni trackball + * + * Sets a scaling value for pimoroni trackball to allow runtime adjustment. This isn't used by the sensor and is an + * approximation so the functions are consistent across drivers. + * + * NOTE: This rounds down to the nearest number divisable by 125 that's a positive integer, values below 125 are clamped to 125. + * + * @param cpi uint16_t + */ +void pimoroni_trackball_set_cpi(uint16_t cpi) { + if (cpi < 249) { + precision = 1; + } else { + precision = (cpi - (cpi % 125)) / 125; + } +} void pimoroni_trackball_set_rgbw(uint8_t r, uint8_t g, uint8_t b, uint8_t w) { uint8_t data[4] = {r, g, b, w}; @@ -60,7 +76,7 @@ i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data) { return status; } -__attribute__((weak)) void pimironi_trackball_device_init(void) { +__attribute__((weak)) void pimoroni_trackball_device_init(void) { i2c_init(); pimoroni_trackball_set_rgbw(0x00, 0x00, 0x00, 0x00); } diff --git a/drivers/sensors/pimoroni_trackball.h b/drivers/sensors/pimoroni_trackball.h index 59ee8724ba..e20ee748a7 100644 --- a/drivers/sensors/pimoroni_trackball.h +++ b/drivers/sensors/pimoroni_trackball.h @@ -23,9 +23,6 @@ #ifndef PIMORONI_TRACKBALL_ADDRESS # define PIMORONI_TRACKBALL_ADDRESS 0x0A #endif -#ifndef PIMORONI_TRACKBALL_INTERVAL_MS -# define PIMORONI_TRACKBALL_INTERVAL_MS 8 -#endif #ifndef PIMORONI_TRACKBALL_SCALE # define PIMORONI_TRACKBALL_SCALE 5 #endif @@ -52,10 +49,10 @@ typedef struct { uint8_t click; } pimoroni_data_t; -void pimironi_trackball_device_init(void); +void pimoroni_trackball_device_init(void); void pimoroni_trackball_set_rgbw(uint8_t red, uint8_t green, uint8_t blue, uint8_t white); int16_t pimoroni_trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_t scale); void pimoroni_trackball_adapt_values(int8_t* mouse, int16_t* offset); -float pimoroni_trackball_get_precision(void); -void pimoroni_trackball_set_precision(float precision); +uint16_t pimoroni_trackball_get_cpi(void); +void pimoroni_trackball_set_cpi(uint16_t cpi); i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data); diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 50d1c35801..ad0a724ee4 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -16,6 +16,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "spi_master.h" #include "pmw3360.h" #include "wait.h" #include "debug.h" @@ -24,59 +25,65 @@ // Registers // clang-format off -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Raw_Data_Sum 0x08 -#define REG_Maximum_Raw_data 0x09 -#define REG_Minimum_Raw_data 0x0A -#define REG_Shutter_Lower 0x0B -#define REG_Shutter_Upper 0x0C -#define REG_Control 0x0D -#define REG_Config1 0x0F -#define REG_Config2 0x10 -#define REG_Angle_Tune 0x11 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate_Lower 0x15 -#define REG_Rest1_Rate_Upper 0x16 -#define REG_Rest1_Downshift 0x17 -#define REG_Rest2_Rate_Lower 0x18 -#define REG_Rest2_Rate_Upper 0x19 -#define REG_Rest2_Downshift 0x1A -#define REG_Rest3_Rate_Lower 0x1B -#define REG_Rest3_Rate_Upper 0x1C -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_Raw_Data_Dump 0x29 -#define REG_SROM_ID 0x2A -#define REG_Min_SQ_Run 0x2B -#define REG_Raw_Data_Threshold 0x2C -#define REG_Config5 0x2F -#define REG_Power_Up_Reset 0x3A -#define REG_Shutdown 0x3B -#define REG_Inverse_Product_ID 0x3F -#define REG_LiftCutoff_Tune3 0x41 -#define REG_Angle_Snap 0x42 -#define REG_LiftCutoff_Tune1 0x4A -#define REG_Motion_Burst 0x50 -#define REG_LiftCutoff_Tune_Timeout 0x58 -#define REG_LiftCutoff_Tune_Min_Length 0x5A -#define REG_SROM_Load_Burst 0x62 -#define REG_Lift_Config 0x63 -#define REG_Raw_Data_Burst 0x64 -#define REG_LiftCutoff_Tune2 0x65 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Raw_Data_Sum 0x08 +#define REG_Maximum_Raw_data 0x09 +#define REG_Minimum_Raw_data 0x0a +#define REG_Shutter_Lower 0x0b +#define REG_Shutter_Upper 0x0c +#define REG_Control 0x0d +#define REG_Config1 0x0f +#define REG_Config2 0x10 +#define REG_Angle_Tune 0x11 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate_Lower 0x15 +#define REG_Rest1_Rate_Upper 0x16 +#define REG_Rest1_Downshift 0x17 +#define REG_Rest2_Rate_Lower 0x18 +#define REG_Rest2_Rate_Upper 0x19 +#define REG_Rest2_Downshift 0x1a +#define REG_Rest3_Rate_Lower 0x1b +#define REG_Rest3_Rate_Upper 0x1c +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_Raw_Data_Dump 0x29 +#define REG_SROM_ID 0x2a +#define REG_Min_SQ_Run 0x2b +#define REG_Raw_Data_Threshold 0x2c +#define REG_Config5 0x2f +#define REG_Power_Up_Reset 0x3a +#define REG_Shutdown 0x3b +#define REG_Inverse_Product_ID 0x3f +#define REG_LiftCutoff_Tune3 0x41 +#define REG_Angle_Snap 0x42 +#define REG_LiftCutoff_Tune1 0x4a +#define REG_Motion_Burst 0x50 +#define REG_LiftCutoff_Tune_Timeout 0x58 +#define REG_LiftCutoff_Tune_Min_Length 0x5a +#define REG_SROM_Load_Burst 0x62 +#define REG_Lift_Config 0x63 +#define REG_Raw_Data_Burst 0x64 +#define REG_LiftCutoff_Tune2 0x65 + +#define CPI_STEP 100 // clang-format on +// limits to 0--119, resulting in a CPI range of 100 -- 12000 (as only steps of 100 are possible). +// Note that for the PMW3389DM chip, the step size is 50 and supported range is +// up to 16000. The datasheet does not indicate the minimum CPI though, neither +// whether this uses 2 bytes (as 16000/50 == 320) #ifndef MAX_CPI -# define MAX_CPI 0x77 // limits to 0--119, should be max cpi/100 +# define MAX_CPI 0x77 #endif bool _inBurst = false; @@ -86,66 +93,50 @@ void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' #endif #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) -bool spi_start_adv(void) { +bool pmw3360_spi_start(void) { bool status = spi_start(PMW3360_CS_PIN, PMW3360_SPI_LSBFIRST, PMW3360_SPI_MODE, PMW3360_SPI_DIVISOR); + // tNCS-SCLK, 120ns wait_us(1); return status; } -void spi_stop_adv(void) { - wait_us(1); - spi_stop(); -} +spi_status_t pmw3360_write(uint8_t reg_addr, uint8_t data) { + pmw3360_spi_start(); -spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data) { if (reg_addr != REG_Motion_Burst) { _inBurst = false; } - spi_start_adv(); // send address of the register, with MSBit = 1 to indicate it's a write spi_status_t status = spi_write(reg_addr | 0x80); status = spi_write(data); - // tSCLK-NCS for write operation - wait_us(20); - - // tSWW/tSWR (=120us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound - wait_us(100); + // tSCLK-NCS for write operation is 35us + wait_us(35); spi_stop(); + + // tSWW/tSWR (=180us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound + wait_us(145); return status; } -uint8_t spi_read_adv(uint8_t reg_addr) { - spi_start_adv(); +uint8_t pmw3360_read(uint8_t reg_addr) { + pmw3360_spi_start(); // send adress of the register, with MSBit = 0 to indicate it's a read spi_write(reg_addr & 0x7f); - + // tSRAD (=160us) + wait_us(160); uint8_t data = spi_read(); // tSCLK-NCS for read operation is 120ns wait_us(1); + spi_stop(); // tSRW/tSRR (=20us) minus tSCLK-NCS wait_us(19); - - spi_stop(); return data; } -void pmw3360_set_cpi(uint16_t cpi) { - uint8_t cpival = constrain((cpi / 100) - 1, 0, MAX_CPI); - - spi_start_adv(); - spi_write_adv(REG_Config1, cpival); - spi_stop(); -} - -uint16_t pmw3360_get_cpi(void) { - uint8_t cpival = spi_read_adv(REG_Config1); - return (uint16_t)((cpival + 1) & 0xFF) * 100; -} - bool pmw3360_init(void) { setPinOutput(PMW3360_CS_PIN); @@ -153,42 +144,51 @@ bool pmw3360_init(void) { _inBurst = false; spi_stop(); - spi_start_adv(); + pmw3360_spi_start(); spi_stop(); - spi_write_adv(REG_Shutdown, 0xb6); // Shutdown first + pmw3360_write(REG_Shutdown, 0xb6); // Shutdown first wait_ms(300); - spi_start_adv(); + pmw3360_spi_start(); wait_us(40); - spi_stop_adv(); + spi_stop(); wait_us(40); - spi_write_adv(REG_Power_Up_Reset, 0x5a); + // power up, need to first drive NCS high then low, see above. + pmw3360_write(REG_Power_Up_Reset, 0x5a); wait_ms(50); - spi_read_adv(REG_Motion); - spi_read_adv(REG_Delta_X_L); - spi_read_adv(REG_Delta_X_H); - spi_read_adv(REG_Delta_Y_L); - spi_read_adv(REG_Delta_Y_H); + // read registers and discard + pmw3360_read(REG_Motion); + pmw3360_read(REG_Delta_X_L); + pmw3360_read(REG_Delta_X_H); + pmw3360_read(REG_Delta_Y_L); + pmw3360_read(REG_Delta_Y_H); pmw3360_upload_firmware(); - spi_stop_adv(); + spi_stop(); wait_ms(10); pmw3360_set_cpi(PMW3360_CPI); wait_ms(1); - spi_write_adv(REG_Config2, 0x00); + pmw3360_write(REG_Config2, 0x00); - spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -30, 30)); + pmw3360_write(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -127, 127)); - spi_write_adv(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE); + pmw3360_write(REG_Lift_Config, PMW3360_LIFTOFF_DISTANCE); bool init_success = pmw3360_check_signature(); +#ifdef CONSOLE_ENABLE + if (init_success) { + dprintf("pmw3360 signature verified"); + } else { + dprintf("pmw3360 signature verification failed!"); + } +#endif writePinLow(PMW3360_CS_PIN); @@ -196,13 +196,16 @@ bool pmw3360_init(void) { } void pmw3360_upload_firmware(void) { - spi_write_adv(REG_SROM_Enable, 0x1d); + // Datasheet claims we need to disable REST mode first, but during startup + // it's already disabled and we're not turning it on ... + // pmw3360_write(REG_Config2, 0x00); // disable REST mode + pmw3360_write(REG_SROM_Enable, 0x1d); wait_ms(10); - spi_write_adv(REG_SROM_Enable, 0x18); + pmw3360_write(REG_SROM_Enable, 0x18); - spi_start_adv(); + pmw3360_spi_start(); spi_write(REG_SROM_Load_Burst | 0x80); wait_us(15); @@ -214,68 +217,73 @@ void pmw3360_upload_firmware(void) { } wait_us(200); - spi_read_adv(REG_SROM_ID); - - spi_write_adv(REG_Config2, 0x00); - - spi_stop(); - wait_ms(10); + pmw3360_read(REG_SROM_ID); + pmw3360_write(REG_Config2, 0x00); } bool pmw3360_check_signature(void) { - uint8_t pid = spi_read_adv(REG_Product_ID); - uint8_t iv_pid = spi_read_adv(REG_Inverse_Product_ID); - uint8_t SROM_ver = spi_read_adv(REG_SROM_ID); + uint8_t pid = pmw3360_read(REG_Product_ID); + uint8_t iv_pid = pmw3360_read(REG_Inverse_Product_ID); + uint8_t SROM_ver = pmw3360_read(REG_SROM_ID); return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04 } +uint16_t pmw3360_get_cpi(void) { + uint8_t cpival = pmw3360_read(REG_Config1); + return (uint16_t)((cpival + 1) & 0xFF) * CPI_STEP; +} + +void pmw3360_set_cpi(uint16_t cpi) { + uint8_t cpival = constrain((cpi / CPI_STEP) - 1, 0, MAX_CPI); + pmw3360_write(REG_Config1, cpival); +} + report_pmw3360_t pmw3360_read_burst(void) { + report_pmw3360_t report = {0}; + if (!_inBurst) { #ifdef CONSOLE_ENABLE dprintf("burst on"); #endif - spi_write_adv(REG_Motion_Burst, 0x00); + pmw3360_write(REG_Motion_Burst, 0x00); _inBurst = true; } - spi_start_adv(); + pmw3360_spi_start(); spi_write(REG_Motion_Burst); - wait_us(35); // waits for tSRAD + wait_us(35); // waits for tSRAD_MOTBR - report_pmw3360_t data = {0}; + report.motion = spi_read(); + spi_read(); // skip Observation + // delta registers + report.dx = spi_read(); + report.mdx = spi_read(); + report.dy = spi_read(); + report.mdy = spi_read(); - data.motion = spi_read(); - spi_write(0x00); // skip Observation - data.dx = spi_read(); - data.mdx = spi_read(); - data.dy = spi_read(); - data.mdy = spi_read(); + if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird. + _inBurst = false; + } spi_stop(); #ifdef CONSOLE_ENABLE if (debug_mouse) { - print_byte(data.motion); - print_byte(data.dx); - print_byte(data.mdx); - print_byte(data.dy); - print_byte(data.mdy); + print_byte(report.motion); + print_byte(report.dx); + print_byte(report.mdx); + print_byte(report.dy); + print_byte(report.mdy); dprintf("\n"); } #endif - data.isMotion = (data.motion & 0x80) != 0; - data.isOnSurface = (data.motion & 0x08) == 0; - data.dx |= (data.mdx << 8); - data.dx = data.dx * -1; - data.dy |= (data.mdy << 8); - data.dy = data.dy * -1; - - spi_stop(); + report.isMotion = (report.motion & 0x80) != 0; + report.isOnSurface = (report.motion & 0x08) == 0; + report.dx |= (report.mdx << 8); + report.dx = report.dx * -1; + report.dy |= (report.mdy << 8); + report.dy = report.dy * -1; - if (data.motion & 0b111) { // panic recovery, sometimes burst mode works weird. - _inBurst = false; - } - - return data; + return report; } diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 9aa8e13f8e..b46fc9056e 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -19,8 +19,6 @@ #pragma once #include <stdint.h> -#include "report.h" -#include "spi_master.h" #ifndef PMW3360_CPI # define PMW3360_CPI 1600 @@ -69,10 +67,6 @@ This should work for the 3390 and 3391 too, in theory. # define PMW3360_FIRMWARE_H "pmw3360_firmware.h" #endif -#ifdef CONSOLE_ENABLE -void print_byte(uint8_t byte); -#endif - typedef struct { int8_t motion; bool isMotion; // True if a motion is detected. @@ -83,16 +77,10 @@ typedef struct { int8_t mdy; } report_pmw3360_t; -bool spi_start_adv(void); -void spi_stop_adv(void); -spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data); -uint8_t spi_read_adv(uint8_t reg_addr); -bool pmw3360_init(void); -void pmw3360_set_cpi(uint16_t cpi); -uint16_t pmw3360_get_cpi(void); -void pmw3360_upload_firmware(void); -bool pmw3360_check_signature(void); +bool pmw3360_init(void); +void pmw3360_upload_firmware(void); +bool pmw3360_check_signature(void); +uint16_t pmw3360_get_cpi(void); +void pmw3360_set_cpi(uint16_t cpi); +/* Reads and clears the current delta values on the sensor */ report_pmw3360_t pmw3360_read_burst(void); - -#define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0) -#define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI) diff --git a/keyboards/40percentclub/ut47/keymaps/default/keymap.c b/keyboards/40percentclub/ut47/keymaps/default/keymap.c index 0fa7838dfd..4eb2c190c1 100644 --- a/keyboards/40percentclub/ut47/keymaps/default/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/default/keymap.c @@ -15,7 +15,7 @@ */ #include QMK_KEYBOARD_H #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" #endif #define LT3_TAB LT(3, KC_TAB) @@ -108,11 +108,11 @@ LAYOUT( /* Tab */ //LED keymap functions #ifdef LED_ENABLE void led_chmode(void) { - serial_send(101); + uart_write(0x65); } void led_toggle(void) { - serial_send(100); + uart_write(0x64); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c index 0c1c2e7599..8a0ba7b391 100644 --- a/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/non-us/keymap.c @@ -15,7 +15,7 @@ */ #include QMK_KEYBOARD_H #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" #endif #define LT3_TAB LT(3, KC_TAB) @@ -108,11 +108,11 @@ LAYOUT( /* Tab */ //LED keymap functions #ifdef LED_ENABLE void led_chmode(void) { - serial_send(101); + uart_write(0x65); } void led_toggle(void) { - serial_send(100); + uart_write(0x64); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c index 52372e2857..5e79cdb9a4 100644 --- a/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/nordic/keymap.c @@ -15,7 +15,7 @@ */ #include QMK_KEYBOARD_H #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" #endif @@ -151,11 +151,11 @@ LAYOUT( /* GAMING, toggled on and off - L5 */ //LED keymap functions #ifdef LED_ENABLE void led_chmode(void) { - serial_send(101); + uart_write(0x65); } void led_toggle(void) { - serial_send(100); + uart_write(0x64); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c index ae8ad3e378..75dba3a2d4 100644 --- a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c @@ -15,7 +15,7 @@ */ #include QMK_KEYBOARD_H #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" #endif #define LT3_TAB LT(3, KC_TAB) @@ -60,11 +60,11 @@ LAYOUT( /* Tab */ //LED keymap functions #ifdef LED_ENABLE void led_chmode(void) { - serial_send(101); + uart_write(0x65); } void led_toggle(void) { - serial_send(100); + uart_write(0x64); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/40percentclub/ut47/matrix.c b/keyboards/40percentclub/ut47/matrix.c index e47c7f8e13..89537592c5 100644 --- a/keyboards/40percentclub/ut47/matrix.c +++ b/keyboards/40percentclub/ut47/matrix.c @@ -26,10 +26,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "debug.h" #include "util.h" #include "matrix.h" -#ifdef LED_ENABLE - #include "protocol/serial.h" -#endif - #ifndef DEBOUNCE # define DEBOUNCE 5 @@ -69,10 +65,6 @@ void matrix_init(void) matrix[i] = 0; matrix_debouncing[i] = 0; } - -#ifdef LED_ENABLE - serial_init(); -#endif } uint8_t matrix_scan(void) @@ -104,12 +96,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk index 29cee474ff..6c9805e0fc 100644 --- a/keyboards/40percentclub/ut47/rules.mk +++ b/keyboards/40percentclub/ut47/rules.mk @@ -18,4 +18,5 @@ AUDIO_ENABLE = no # Audio output # custom matrix setup CUSTOM_MATRIX = yes -SRC += matrix.c protocol/serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/40percentclub/ut47/ut47.c b/keyboards/40percentclub/ut47/ut47.c index 9054335e5a..864edaeb57 100644 --- a/keyboards/40percentclub/ut47/ut47.c +++ b/keyboards/40percentclub/ut47/ut47.c @@ -15,7 +15,11 @@ */ #include "ut47.h" #ifdef LED_ENABLE - #include "protocol/serial.h" + #include "uart.h" + +void matrix_init_kb() { + uart_init(9600); +} #endif bool process_record_kb(uint16_t keycode, keyrecord_t *record) { @@ -23,7 +27,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { // runs for every action, just before processing by the firmware if (record->event.pressed) { #ifdef LED_ENABLE - serial_send((record->event.key.row*16)+record->event.key.col); + uart_write((record->event.key.row*16)+record->event.key.col); #endif } return process_record_user(keycode, record); diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h index 9ad384c8ff..0e4f4c3baf 100644 --- a/keyboards/ai03/orbit/config.h +++ b/keyboards/ai03/orbit/config.h @@ -44,13 +44,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 } #define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 } #define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 } - -#define SPLIT_HAND_PIN D5 - -//#define USE_I2C - -#define SELECT_SOFT_SERIAL_SPEED 1 - #define UNUSED_PINS /* COL2ROW, ROW2COL */ @@ -60,6 +53,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. */ #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 +#define SELECT_SOFT_SERIAL_SPEED 1 + +#define SPLIT_LED_STATE_ENABLE +#define SPLIT_LAYER_STATE_ENABLE + +#define SPLIT_HAND_PIN D5 #define BACKLIGHT_PIN B7 // #define BACKLIGHT_BREATHING diff --git a/keyboards/ai03/orbit/keymaps/default/keymap.c b/keyboards/ai03/orbit/keymaps/default/keymap.c index fa383d7c00..c9696ccde6 100644 --- a/keyboards/ai03/orbit/keymaps/default/keymap.c +++ b/keyboards/ai03/orbit/keymaps/default/keymap.c @@ -48,25 +48,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case MANUAL: - if (record->event.pressed) - { - // Keypress + if (record->event.pressed) { SEND_STRING("https://kb.ai03.me/redir/orbit"); - } - else - { - // Key release } break; case DBLZERO: - if (record->event.pressed) - { - // Keypress + if (record->event.pressed) { SEND_STRING("00"); - } - else - { - // Key release } break; } diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c deleted file mode 100644 index b8e3296686..0000000000 --- a/keyboards/ai03/orbit/matrix.c +++ /dev/null @@ -1,328 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include "wait.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "config.h" -#include "split_flags.h" -#include "quantum.h" -#include "debounce.h" -#include "transport.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -//#define ROWS_PER_HAND (MATRIX_ROWS / 2) - -#ifdef DIRECT_PINS -static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; -#else -static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t raw_matrix[ROWS_PER_HAND]; - -// row offsets for each hand -uint8_t thisHand, thatHand; - -// user-defined overridable functions - -__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } - -__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } - -__attribute__((weak)) void matrix_init_user(void) {} - -__attribute__((weak)) void matrix_scan_user(void) {} - -__attribute__((weak)) void matrix_slave_scan_user(void) {} - -// helper functions - -inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } - -inline uint8_t matrix_cols(void) { return MATRIX_COLS; } - -bool matrix_is_modified(void) { - if (debounce_active()) return false; - return true; -} - -inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } - -inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } - -void matrix_print(void) { - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); - print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) { - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; -} - -// matrix code - -#ifdef DIRECT_PINS - -static void init_pins(void) { - for (int row = 0; row < MATRIX_ROWS; row++) { - for (int col = 0; col < MATRIX_COLS; col++) { - pin_t pin = direct_pins[row][col]; - if (pin != NO_PIN) { - setPinInputHigh(pin); - } - } - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - matrix_row_t last_row_value = current_matrix[current_row]; - current_matrix[current_row] = 0; - - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - pin_t pin = direct_pins[current_row][col_index]; - if (pin != NO_PIN) { - current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index); - } - } - - return (last_row_value != current_matrix[current_row]); -} - -#elif (DIODE_DIRECTION == COL2ROW) - -static void select_row(uint8_t row) { - setPinOutput(row_pins[row]); - writePinLow(row_pins[row]); -} - -static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } - -static void unselect_rows(void) { - for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { - setPinInputHigh(row_pins[x]); - } -} - -static void init_pins(void) { - unselect_rows(); - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - -#elif (DIODE_DIRECTION == ROW2COL) - -static void select_col(uint8_t col) { - setPinOutput(col_pins[col]); - writePinLow(col_pins[col]); -} - -static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); } - -static void unselect_cols(void) { - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - -static void init_pins(void) { - unselect_cols(); - for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { - setPinInputHigh(row_pins[x]); - } -} - -static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { - bool matrix_changed = false; - - // Select col and wait for col selecton to stabilize - select_col(current_col); - wait_us(30); - - // For each row... - for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[row_index]; - - // Check row pin state - if (readPin(row_pins[row_index])) { - // Pin HI, clear col bit - current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); - } else { - // Pin LO, set col bit - current_matrix[row_index] |= (ROW_SHIFTER << current_col); - } - - // Determine if the matrix changed state - if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { - matrix_changed = true; - } - } - - // Unselect col - unselect_col(current_col); - - return matrix_changed; -} - -#endif - -void matrix_init(void) { - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - - // Set pinout for right half if pinout for that half is defined - if (!isLeftHand) { -#ifdef MATRIX_ROW_PINS_RIGHT - const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - row_pins[i] = row_pins_right[i]; - } -#endif -#ifdef MATRIX_COL_PINS_RIGHT - const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT; - for (uint8_t i = 0; i < MATRIX_COLS; i++) { - col_pins[i] = col_pins_right[i]; - } -#endif - } - - thisHand = isLeftHand ? 0 : (ROWS_PER_HAND); - thatHand = ROWS_PER_HAND - thisHand; - - // initialize key pins - init_pins(); - - // initialize matrix state: all keys off - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - } - - debounce_init(ROWS_PER_HAND); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) { - bool changed = false; - -#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { - changed |= read_cols_on_row(raw_matrix, current_row); - } -#elif (DIODE_DIRECTION == ROW2COL) - // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - changed |= read_rows_on_col(raw_matrix, current_col); - } -#endif - - debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); - - return 1; -} - -uint8_t matrix_scan(void) { - uint8_t ret = _matrix_scan(); - - if (is_keyboard_master()) { - static uint8_t error_count; - - if (!transport_master(matrix + thatHand)) { - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[thatHand + i] = 0; - } - } - } else { - error_count = 0; - } - - matrix_scan_quantum(); - } else { - transport_slave(matrix + thisHand); - matrix_slave_scan_user(); - } - - return ret; -} diff --git a/keyboards/ai03/orbit/orbit.c b/keyboards/ai03/orbit/orbit.c index 97553e318a..5097f9cd90 100644 --- a/keyboards/ai03/orbit/orbit.c +++ b/keyboards/ai03/orbit/orbit.c @@ -15,196 +15,124 @@ */ #include "orbit.h" #include "split_util.h" -#include "transport.h" +void led_init_ports(void) { + // Initialize indicator LEDs to output + if (isLeftHand) { + setPinOutput(C6); + setPinOutput(B6); + setPinOutput(B5); + } else { + setPinOutput(F6); + setPinOutput(F7); + setPinOutput(C7); + } + + set_layer_indicators(0); +} // Call led_toggle to set LEDs easily // LED IDs: -// +// // (LEFT) 0 1 2 | 3 4 5 (RIGHT) - -void led_toggle(int id, bool on) { - - if (isLeftHand) { - switch(id) { - case 0: - // Left hand C6 - if (on) - //PORTC |= (1<<6); - writePinHigh(C6); - else - //PORTC &= ~(1<<6); - writePinLow(C6); - break; - case 1: - // Left hand B6 - if (on) - //PORTB |= (1<<6); - writePinHigh(B6); - else - //PORTB &= ~(1<<6); - writePinLow(B6); - break; - case 2: - // Left hand B5 - if (on) - //PORTB |= (1<<5); - writePinHigh(B5); - else - //PORTB &= ~(1<<5); - writePinLow(B5); - break; - default: - break; - } - } else { - switch(id) { - case 3: - // Right hand F6 - if (on) - //PORTF |= (1<<6); - writePinHigh(F6); - else - //PORTF &= ~(1<<6); - writePinLow(F6); - break; - case 4: - // Right hand F7 - if (on) - //PORTF |= (1<<7); - writePinHigh(F7); - else - //PORTF &= ~(1<<7); - writePinLow(F7); - break; - case 5: - // Right hand C7 - if (on) - //PORTC |= (1<<7); - writePinHigh(C7); - else - //PORTC &= ~(1<<7); - writePinLow(C7); - break; - default: - break; - } - } +void led_toggle(uint8_t id, bool on) { + if (isLeftHand) { + switch (id) { + case 0: + // Left hand C6 + writePin(C6, on); + break; + case 1: + // Left hand B6 + writePin(B6, on); + break; + case 2: + // Left hand B5 + writePin(B5, on); + break; + default: + break; + } + } else { + switch (id) { + case 3: + // Right hand F6 + writePin(F6, on); + break; + case 4: + // Right hand F7 + writePin(F7, on); + break; + case 5: + // Right hand C7 + writePin(C7, on); + break; + default: + break; + } + } } // Set all LEDs at once using an array of 6 booleans // LED IDs: -// +// // (LEFT) 0 1 2 | 3 4 5 (RIGHT) -// +// // Ex. set_all_leds({ false, false, false, true, true, true }) would turn off left hand, turn on right hand void set_all_leds(bool leds[6]) { - for (int i = 0; i < 6; i++) { - led_toggle(i, leds[i]); - } + for (int i = 0; i < 6; i++) { + led_toggle(i, leds[i]); + } } void set_layer_indicators(uint8_t layer) { - - switch (layer) - { - case 0: - led_toggle(0, true); - led_toggle(1, false); - led_toggle(2, false); - break; - case 1: - led_toggle(0, true); - led_toggle(1, true); - led_toggle(2, false); - break; - case 2: - led_toggle(0, true); - led_toggle(1, true); - led_toggle(2, true); - break; - case 3: - led_toggle(0, false); - led_toggle(1, true); - led_toggle(2, true); - break; - case 4: - led_toggle(0, false); - led_toggle(1, false); - led_toggle(2, true); - break; - default: - led_toggle(0, true); - led_toggle(1, false); - led_toggle(2, true); - break; - } - + switch (layer) { + case 0: + led_toggle(0, true); + led_toggle(1, false); + led_toggle(2, false); + break; + case 1: + led_toggle(0, true); + led_toggle(1, true); + led_toggle(2, false); + break; + case 2: + led_toggle(0, true); + led_toggle(1, true); + led_toggle(2, true); + break; + case 3: + led_toggle(0, false); + led_toggle(1, true); + led_toggle(2, true); + break; + case 4: + led_toggle(0, false); + led_toggle(1, false); + led_toggle(2, true); + break; + default: + led_toggle(0, true); + led_toggle(1, false); + led_toggle(2, true); + break; + } } -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - // Initialize indicator LEDs to output - if (isLeftHand) - { - setPinOutput(C6); - setPinOutput(B6); - setPinOutput(B5); - //DDRC |= (1<<6); - //DDRB |= (1<<6); - //DDRB |= (1<<5); - } - else - { - setPinOutput(F6); - setPinOutput(F7); - setPinOutput(C7); - //DDRF |= (1<<6); - //DDRF |= (1<<7); - //DDRC |= (1<<7); - } - - set_layer_indicators(0); - - matrix_init_user(); +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + led_toggle(3, led_state.num_lock); + led_toggle(4, led_state.caps_lock); + led_toggle(5, led_state.scroll_lock); + } + return res; } -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - - if (is_keyboard_master()) { - - serial_m2s_buffer.nlock_led = IS_LED_ON(usb_led, USB_LED_NUM_LOCK); - serial_m2s_buffer.clock_led = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK); - serial_m2s_buffer.slock_led = IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK); - - led_toggle(3, IS_LED_ON(usb_led, USB_LED_NUM_LOCK)); - led_toggle(4, IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)); - led_toggle(5, IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)); - - } - - led_set_user(usb_led); -} +layer_state_t layer_state_set_kb(layer_state_t state) { + set_layer_indicators(get_highest_layer(state)); -uint32_t layer_state_set_kb(uint32_t state) { - - if (is_keyboard_master()) - { - serial_m2s_buffer.current_layer = biton32(state); - - // If left half, do the LED toggle thing - if (isLeftHand) - { - set_layer_indicators(biton32(state)); - } - - } - // NOTE: Do not set slave LEDs here. - // This is not called on slave - - return layer_state_set_user(state); + return layer_state_set_user(state); } diff --git a/keyboards/ai03/orbit/orbit.h b/keyboards/ai03/orbit/orbit.h index 39f1ebb0e3..7f3b1aca32 100644 --- a/keyboards/ai03/orbit/orbit.h +++ b/keyboards/ai03/orbit/orbit.h @@ -18,6 +18,8 @@ #include "quantum.h" +#define XXX KC_NO + /* This a shortcut to help you visually see your layout. * * The first section contains all of the arguments representing the physical @@ -26,17 +28,6 @@ * The second converts the arguments into a two-dimensional array which * represents the switch matrix. */ - -#ifdef USE_I2C -#include <stddef.h> -#ifdef __AVR__ - #include <avr/io.h> - #include <avr/interrupt.h> -#endif -#endif - -#define XXX KC_NO - #define LAYOUT( \ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ @@ -56,6 +47,6 @@ { R40, R41, R42, R43, R44, R45, XXX } \ } -extern void led_toggle(int id, bool on); +void led_toggle(uint8_t id, bool on); void set_all_leds(bool leds[6]); -extern void set_layer_indicators(uint8_t layer); +void set_layer_indicators(uint8_t layer); diff --git a/keyboards/ai03/orbit/readme.md b/keyboards/ai03/orbit/readme.md index 58ba2079d5..0c320929b6 100644 --- a/keyboards/ai03/orbit/readme.md +++ b/keyboards/ai03/orbit/readme.md @@ -4,9 +4,9 @@ A split ergonomic keyboard project. -Keyboard Maintainer: [ai03](https://github.com/ai03-2725) -Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit) -Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed. +* Keyboard Maintainer: [ai03](https://github.com/ai03-2725) +* Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit) +* Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk index f98e2382f1..a0f1ab94a9 100644 --- a/keyboards/ai03/orbit/rules.mk +++ b/keyboards/ai03/orbit/rules.mk @@ -16,12 +16,4 @@ NKRO_ENABLE = yes # Enable N-Key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -USE_I2C = no # I2C for split communication -CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) -# SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files - -SRC += split_util.c \ - split_flags.c \ - serial.c \ - transport.c \ - matrix.c +SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files diff --git a/keyboards/ai03/orbit/serial.c b/keyboards/ai03/orbit/serial.c deleted file mode 100644 index 636dfa0906..0000000000 --- a/keyboards/ai03/orbit/serial.c +++ /dev/null @@ -1,545 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - * - * 2018-10-28 checked - * avr-gcc 4.9.2 - * avr-gcc 5.4.0 - * avr-gcc 7.3.0 - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stddef.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef SOFT_SERIAL_PIN - -#ifdef __AVR_ATmega32U4__ - // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. - #ifdef USE_AVR_I2C - #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 - #error Using ATmega32U4 I2C, so can not use PD0, PD1 - #endif - #endif - - #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 - #define SERIAL_PIN_DDR DDRD - #define SERIAL_PIN_PORT PORTD - #define SERIAL_PIN_INPUT PIND - #if SOFT_SERIAL_PIN == D0 - #define SERIAL_PIN_MASK _BV(PD0) - #define EIMSK_BIT _BV(INT0) - #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) - #define SERIAL_PIN_INTERRUPT INT0_vect - #elif SOFT_SERIAL_PIN == D1 - #define SERIAL_PIN_MASK _BV(PD1) - #define EIMSK_BIT _BV(INT1) - #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) - #define SERIAL_PIN_INTERRUPT INT1_vect - #elif SOFT_SERIAL_PIN == D2 - #define SERIAL_PIN_MASK _BV(PD2) - #define EIMSK_BIT _BV(INT2) - #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) - #define SERIAL_PIN_INTERRUPT INT2_vect - #elif SOFT_SERIAL_PIN == D3 - #define SERIAL_PIN_MASK _BV(PD3) - #define EIMSK_BIT _BV(INT3) - #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) - #define SERIAL_PIN_INTERRUPT INT3_vect - #endif - #elif SOFT_SERIAL_PIN == E6 - #define SERIAL_PIN_DDR DDRE - #define SERIAL_PIN_PORT PORTE - #define SERIAL_PIN_INPUT PINE - #define SERIAL_PIN_MASK _BV(PE6) - #define EIMSK_BIT _BV(INT6) - #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) - #define SERIAL_PIN_INTERRUPT INT6_vect - #else - #error invalid SOFT_SERIAL_PIN value - #endif - -#else - #error serial.c now support ATmega32U4 only -#endif - -#define ALWAYS_INLINE __attribute__((always_inline)) -#define NO_INLINE __attribute__((noinline)) -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// parity check -#define ODD_PARITY 1 -#define EVEN_PARITY 0 -#define PARITY EVEN_PARITY - -#ifdef SERIAL_DELAY - // custom setup in config.h - // #define TID_SEND_ADJUST 2 - // #define SERIAL_DELAY 6 // micro sec - // #define READ_WRITE_START_ADJUST 30 // cycles - // #define READ_WRITE_WIDTH_ADJUST 8 // cycles -#else -// ============ Standard setups ============ - -#ifndef SELECT_SOFT_SERIAL_SPEED -#define SELECT_SOFT_SERIAL_SPEED 1 -// 0: about 189kbps (Experimental only) -// 1: about 137kbps (default) -// 2: about 75kbps -// 3: about 39kbps -// 4: about 26kbps -// 5: about 20kbps -#endif - -#if __GNUC__ < 6 - #define TID_SEND_ADJUST 14 -#else - #define TID_SEND_ADJUST 2 -#endif - -#if SELECT_SOFT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 34 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #if __GNUC__ < 6 - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_START_ADJUST 33 // cycles - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 36 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#elif SELECT_SOFT_SERIAL_SPEED == 5 - // Ultra Low speed - #define SERIAL_DELAY 48 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #if __GNUC__ < 6 - #define READ_WRITE_WIDTH_ADJUST 3 // cycles - #else - #define READ_WRITE_WIDTH_ADJUST 7 // cycles - #endif -#else -#error invalid SELECT_SOFT_SERIAL_SPEED value -#endif /* SELECT_SOFT_SERIAL_SPEED */ -#endif /* SERIAL_DELAY */ - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH_US 1 -#ifndef SERIAL_USE_MULTI_TRANSACTION - #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY -#else - #define SLAVE_INT_ACK_WIDTH_UNIT 2 - #define SLAVE_INT_ACK_WIDTH 4 -#endif - -static SSTD_t *Transaction_table = NULL; -static uint8_t Transaction_table_size = 0; - -inline static void serial_delay(void) ALWAYS_INLINE; -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static void serial_delay_half1(void) ALWAYS_INLINE; -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static void serial_delay_half2(void) ALWAYS_INLINE; -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static void serial_output(void) ALWAYS_INLINE; -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static void serial_input_with_pullup(void) ALWAYS_INLINE; -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static void serial_low(void) ALWAYS_INLINE; -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static void serial_high(void) ALWAYS_INLINE; -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_output(); - serial_high(); -} - -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) -{ - Transaction_table = sstd_table; - Transaction_table_size = (uint8_t)sstd_table_size; - serial_input_with_pullup(); - - // Enable INT0-INT3,INT6 - EIMSK |= EIMSK_BIT; -#if SERIAL_PIN_MASK == _BV(PE6) - // Trigger on falling edge of INT6 - EICRB &= EICRx_BIT; -#else - // Trigger on falling edge of INT0-INT3 - EICRA &= EICRx_BIT; -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static void sync_recv(void) NO_INLINE; -static -void sync_recv(void) { - for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the target disconnects because the - // serial line will float to high if the target does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static void sync_send(void) NO_INLINE; -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; -static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { - uint8_t byte, i, p, pb; - - _delay_sub_us(READ_WRITE_START_ADJUST); - for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { - serial_delay_half1(); // read the middle of pulses - if( serial_read_pin() ) { - byte = (byte << 1) | 1; p ^= 1; - } else { - byte = (byte << 1) | 0; p ^= 0; - } - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - /* recive parity bit */ - serial_delay_half1(); // read the middle of pulses - pb = serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - - *pterrcount += (p != pb)? 1 : 0; - - return byte; -} - -// Sends a byte with MSB ordering -void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; -void serial_write_chunk(uint8_t data, uint8_t bit) { - uint8_t b, p; - for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { - if(data & b) { - serial_high(); p ^= 1; - } else { - serial_low(); p ^= 0; - } - serial_delay(); - } - /* send parity bit */ - if(p & 1) { serial_high(); } - else { serial_low(); } - serial_delay(); - - serial_low(); // sync_send() / senc_recv() need raise edge -} - -static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -void serial_send_packet(uint8_t *buffer, uint8_t size) { - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - data = buffer[i]; - sync_send(); - serial_write_chunk(data,8); - } -} - -static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; -static -uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { - uint8_t pecount = 0; - for (uint8_t i = 0; i < size; ++i) { - uint8_t data; - sync_recv(); - data = serial_read_chunk(&pecount, 8); - buffer[i] = data; - } - return pecount == 0; -} - -inline static -void change_sender2reciver(void) { - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 -} - -inline static -void change_reciver2sender(void) { - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); //3 - serial_delay_half1(); //4 -} - -static inline uint8_t nibble_bits_count(uint8_t bits) -{ - bits = (bits & 0x5) + (bits >> 1 & 0x5); - bits = (bits & 0x3) + (bits >> 2 & 0x3); - return bits; -} - -// interrupt handle to be used by the target device -ISR(SERIAL_PIN_INTERRUPT) { - -#ifndef SERIAL_USE_MULTI_TRANSACTION - serial_low(); - serial_output(); - SSTD_t *trans = Transaction_table; -#else - // recive transaction table index - uint8_t tid, bits; - uint8_t pecount = 0; - sync_recv(); - bits = serial_read_chunk(&pecount,7); - tid = bits>>3; - bits = (bits&7) != nibble_bits_count(tid); - if( bits || pecount> 0 || tid > Transaction_table_size ) { - return; - } - serial_delay_half1(); - - serial_high(); // response step1 low->high - serial_output(); - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); - SSTD_t *trans = &Transaction_table[tid]; - serial_low(); // response step2 ack high->low -#endif - - // target send phase - if( trans->target2initiator_buffer_size > 0 ) - serial_send_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size); - // target switch to input - change_sender2reciver(); - - // target recive phase - if( trans->initiator2target_buffer_size > 0 ) { - if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size) ) { - *trans->status = TRANSACTION_ACCEPTED; - } else { - *trans->status = TRANSACTION_DATA_ERROR; - } - } else { - *trans->status = TRANSACTION_ACCEPTED; - } - - sync_recv(); //weit initiator output to high -} - -///////// -// start transaction by initiator -// -// int soft_serial_transaction(int sstd_index) -// -// Returns: -// TRANSACTION_END -// TRANSACTION_NO_RESPONSE -// TRANSACTION_DATA_ERROR -// this code is very time dependent, so we need to disable interrupts -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void) { - SSTD_t *trans = Transaction_table; -#else -int soft_serial_transaction(int sstd_index) { - if( sstd_index > Transaction_table_size ) - return TRANSACTION_TYPE_ERROR; - SSTD_t *trans = &Transaction_table[sstd_index]; -#endif - cli(); - - // signal to the target that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH_US); - -#ifndef SERIAL_USE_MULTI_TRANSACTION - // wait for the target response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the target is present - if (serial_read_pin()) { - // target failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - -#else - // send transaction table index - int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); - sync_send(); - _delay_sub_us(TID_SEND_ADJUST); - serial_write_chunk(tid, 7); - serial_delay_half1(); - - // wait for the target response (step1 low->high) - serial_input_with_pullup(); - while( !serial_read_pin() ) { - _delay_sub_us(2); - } - - // check if the target is present (step2 high->low) - for( int i = 0; serial_read_pin(); i++ ) { - if (i > SLAVE_INT_ACK_WIDTH + 1) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - *trans->status = TRANSACTION_NO_RESPONSE; - sei(); - return TRANSACTION_NO_RESPONSE; - } - _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); - } -#endif - - // initiator recive phase - // if the target is present syncronize with it - if( trans->target2initiator_buffer_size > 0 ) { - if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, - trans->target2initiator_buffer_size) ) { - serial_output(); - serial_high(); - *trans->status = TRANSACTION_DATA_ERROR; - sei(); - return TRANSACTION_DATA_ERROR; - } - } - - // initiator switch to output - change_reciver2sender(); - - // initiator send phase - if( trans->initiator2target_buffer_size > 0 ) { - serial_send_packet((uint8_t *)trans->initiator2target_buffer, - trans->initiator2target_buffer_size); - } - - // always, release the line when not in use - sync_send(); - - *trans->status = TRANSACTION_END; - sei(); - return TRANSACTION_END; -} - -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index) { - SSTD_t *trans = &Transaction_table[sstd_index]; - cli(); - int retval = *trans->status; - *trans->status = 0;; - sei(); - return retval; -} -#endif - -#endif - -// Helix serial.c history -// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) -// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) -// (adjusted with avr-gcc 4.9.2) -// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) -// (adjusted with avr-gcc 4.9.2) -// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) -// (adjusted with avr-gcc 4.9.2) -// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) -// (adjusted with avr-gcc 7.3.0) -// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) -// (adjusted with avr-gcc 5.4.0, 7.3.0) -// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669) diff --git a/keyboards/ai03/orbit/serial.h b/keyboards/ai03/orbit/serial.h deleted file mode 100644 index 1c1e640069..0000000000 --- a/keyboards/ai03/orbit/serial.h +++ /dev/null @@ -1,62 +0,0 @@ -#pragma once - -#include <stdbool.h> - -// ///////////////////////////////////////////////////////////////// -// Need Soft Serial defines in config.h -// ///////////////////////////////////////////////////////////////// -// ex. -// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 -// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 -// // 1: about 137kbps (default) -// // 2: about 75kbps -// // 3: about 39kbps -// // 4: about 26kbps -// // 5: about 20kbps -// -// //// USE simple API (using signle-type transaction function) -// /* nothing */ -// //// USE flexible API (using multi-type transaction function) -// #define SERIAL_USE_MULTI_TRANSACTION -// -// ///////////////////////////////////////////////////////////////// - -// Soft Serial Transaction Descriptor -typedef struct _SSTD_t { - uint8_t *status; - uint8_t initiator2target_buffer_size; - uint8_t *initiator2target_buffer; - uint8_t target2initiator_buffer_size; - uint8_t *target2initiator_buffer; -} SSTD_t; -#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) - -// initiator is transaction start side -void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); -// target is interrupt accept side -void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); - -// initiator resullt -#define TRANSACTION_END 0 -#define TRANSACTION_NO_RESPONSE 0x1 -#define TRANSACTION_DATA_ERROR 0x2 -#define TRANSACTION_TYPE_ERROR 0x4 -#ifndef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_transaction(void); -#else -int soft_serial_transaction(int sstd_index); -#endif - -// target status -// *SSTD_t.status has -// initiator: -// TRANSACTION_END -// or TRANSACTION_NO_RESPONSE -// or TRANSACTION_DATA_ERROR -// target: -// TRANSACTION_DATA_ERROR -// or TRANSACTION_ACCEPTED -#define TRANSACTION_ACCEPTED 0x8 -#ifdef SERIAL_USE_MULTI_TRANSACTION -int soft_serial_get_and_clean_status(int sstd_index); -#endif diff --git a/keyboards/ai03/orbit/split_flags.c b/keyboards/ai03/orbit/split_flags.c deleted file mode 100644 index 1f5825d650..0000000000 --- a/keyboards/ai03/orbit/split_flags.c +++ /dev/null @@ -1,5 +0,0 @@ -#include "split_flags.h" - -volatile bool RGB_DIRTY = false; - -volatile bool BACKLIT_DIRTY = false;
\ No newline at end of file diff --git a/keyboards/ai03/orbit/split_flags.h b/keyboards/ai03/orbit/split_flags.h deleted file mode 100644 index aaac474a7d..0000000000 --- a/keyboards/ai03/orbit/split_flags.h +++ /dev/null @@ -1,15 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include <stdint.h> - -/** -* Global Flags -**/ - -//RGB Stuff -extern volatile bool RGB_DIRTY; - - -//Backlight Stuff -extern volatile bool BACKLIT_DIRTY; diff --git a/keyboards/ai03/orbit/split_util.c b/keyboards/ai03/orbit/split_util.c deleted file mode 100644 index 2352e5a111..0000000000 --- a/keyboards/ai03/orbit/split_util.c +++ /dev/null @@ -1,87 +0,0 @@ -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" -#include "timer.h" -#include "split_flags.h" -#include "transport.h" -#include "quantum.h" - -#ifdef EE_HANDS -# include "eeprom.h" -# include "eeconfig.h" -#endif - -volatile bool isLeftHand = true; - -__attribute__((weak)) -bool is_keyboard_left(void) { - #ifdef SPLIT_HAND_PIN - // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand - setPinInput(SPLIT_HAND_PIN); - return readPin(SPLIT_HAND_PIN); - #else - #ifdef EE_HANDS - return eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - #ifdef MASTER_RIGHT - return !is_keyboard_master(); - #else - return is_keyboard_master(); - #endif - #endif - #endif -} - -bool is_keyboard_master(void) -{ -#ifdef __AVR__ - static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN; - - // only check once, as this is called often - if (usbstate == UNKNOWN) - { - USBCON |= (1 << OTGPADE); // enables VBUS pad - wait_us(5); - - usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS - } - - return (usbstate == MASTER); -#else - return true; -#endif -} - -static void keyboard_master_setup(void) { -#if defined(USE_I2C) - #ifdef SSD1306OLED - matrix_master_OLED_init (); - #endif -#endif - transport_master_init(); - - // For master the Backlight info needs to be sent on startup - // Otherwise the salve won't start with the proper info until an update - BACKLIT_DIRTY = true; -} - -static void keyboard_slave_setup(void) -{ - transport_slave_init(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) -{ - isLeftHand = is_keyboard_left(); - - if (is_keyboard_master()) - { - keyboard_master_setup(); - } - else - { - keyboard_slave_setup(); - } -} diff --git a/keyboards/ai03/orbit/split_util.h b/keyboards/ai03/orbit/split_util.h deleted file mode 100644 index 20f7535bf4..0000000000 --- a/keyboards/ai03/orbit/split_util.h +++ /dev/null @@ -1,10 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include <stdint.h> -#include <stdio.h> -#include <stdlib.h> - -extern volatile bool isLeftHand; - -void matrix_master_OLED_init (void); diff --git a/keyboards/ai03/orbit/transport.c b/keyboards/ai03/orbit/transport.c deleted file mode 100644 index 447fafed14..0000000000 --- a/keyboards/ai03/orbit/transport.c +++ /dev/null @@ -1,238 +0,0 @@ - -#include "transport.h" - -#include "config.h" -#include "matrix.h" -#include "quantum.h" - -#include "orbit.h" - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -#ifdef RGBLIGHT_ENABLE -# include "rgblight.h" -#endif - -#ifdef BACKLIGHT_ENABLE -# include "backlight.h" - extern backlight_config_t backlight_config; -#endif - -#if defined(USE_I2C) - -#include "i2c.h" - -#ifndef SLAVE_I2C_ADDRESS -# define SLAVE_I2C_ADDRESS 0x32 -#endif - -#if (MATRIX_COLS > 8) -# error "Currently only supports 8 COLS" -#endif - -// Get rows from other half over i2c -bool transport_master(matrix_row_t matrix[]) { - int err = 0; - - // write backlight info -#ifdef BACKLIGHT_ENABLE - if (BACKLIT_DIRTY) { - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // Backlight location - err = i2c_master_write(I2C_BACKLIT_START); - if (err) { goto i2c_error; } - - // Write backlight - i2c_master_write(get_backlight_level()); - - BACKLIT_DIRTY = false; - } -#endif - - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // start of matrix stored at I2C_KEYMAP_START - err = i2c_master_write(I2C_KEYMAP_START); - if (err) { goto i2c_error; } - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) { goto i2c_error; } - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[i] = i2c_master_read(I2C_ACK); - } - matrix[i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return false; - } - -#ifdef RGBLIGHT_ENABLE - if (RGB_DIRTY) { - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) { goto i2c_error; } - - // RGB Location - err = i2c_master_write(I2C_RGB_START); - if (err) { goto i2c_error; } - - uint32_t dword = eeconfig_read_rgblight(); - - // Write RGB - err = i2c_master_write_data(&dword, 4); - if (err) { goto i2c_error; } - - RGB_DIRTY = false; - i2c_master_stop(); - } -#endif - - return true; -} - -void transport_slave(matrix_row_t matrix[]) { - - for (int i = 0; i < ROWS_PER_HAND; ++i) - { - i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i]; - } - // Read Backlight Info - #ifdef BACKLIGHT_ENABLE - if (BACKLIT_DIRTY) - { - backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]); - BACKLIT_DIRTY = false; - } - #endif - #ifdef RGBLIGHT_ENABLE - if (RGB_DIRTY) - { - // Disable interupts (RGB data is big) - cli(); - // Create new DWORD for RGB data - uint32_t dword; - - // Fill the new DWORD with the data that was sent over - uint8_t * dword_dat = (uint8_t *)(&dword); - for (int i = 0; i < 4; i++) - { - dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i]; - } - - // Update the RGB now with the new data and set RGB_DIRTY to false - rgblight_update_dword(dword); - RGB_DIRTY = false; - // Re-enable interupts now that RGB is set - sei(); - } - #endif -} - -void transport_master_init(void) { - i2c_master_init(); -} - -void transport_slave_init(void) { - i2c_slave_init(SLAVE_I2C_ADDRESS); -} - -#else // USE_SERIAL - -#include "serial.h" - - - -volatile Serial_s2m_buffer_t serial_s2m_buffer = {}; -volatile Serial_m2s_buffer_t serial_m2s_buffer = {}; -uint8_t volatile status0 = 0; - -SSTD_t transactions[] = { - { (uint8_t *)&status0, - sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer, - sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer - } -}; - -uint8_t slave_layer_cache; -uint8_t slave_nlock_cache; -uint8_t slave_clock_cache; -uint8_t slave_slock_cache; - -void transport_master_init(void) -{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } - -void transport_slave_init(void) -{ - soft_serial_target_init(transactions, TID_LIMIT(transactions)); - slave_layer_cache = 255; - slave_nlock_cache = 255; - slave_clock_cache = 255; - slave_slock_cache = 255; -} - -bool transport_master(matrix_row_t matrix[]) { - - if (soft_serial_transaction()) { - return false; - } - - // TODO: if MATRIX_COLS > 8 change to unpack() - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[i] = serial_s2m_buffer.smatrix[i]; - } - - #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - // Code to send RGB over serial goes here (not implemented yet) - #endif - - #ifdef BACKLIGHT_ENABLE - // Write backlight level for slave to read - serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0; - #endif - - return true; -} - -void transport_slave(matrix_row_t matrix[]) { - - // TODO: if MATRIX_COLS > 8 change to pack() - for (int i = 0; i < ROWS_PER_HAND; ++i) - { - serial_s2m_buffer.smatrix[i] = matrix[i]; - } - #ifdef BACKLIGHT_ENABLE - backlight_set(serial_m2s_buffer.backlight_level); - #endif - #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - // Add serial implementation for RGB here - #endif - - if (slave_layer_cache != serial_m2s_buffer.current_layer) { - slave_layer_cache = serial_m2s_buffer.current_layer; - set_layer_indicators(slave_layer_cache); - } - - if (slave_nlock_cache != serial_m2s_buffer.nlock_led) { - slave_nlock_cache = serial_m2s_buffer.nlock_led; - led_toggle(3, slave_nlock_cache); - } - if (slave_clock_cache != serial_m2s_buffer.clock_led) { - slave_clock_cache = serial_m2s_buffer.clock_led; - led_toggle(4, slave_clock_cache); - } - if (slave_slock_cache != serial_m2s_buffer.slock_led) { - slave_slock_cache = serial_m2s_buffer.slock_led; - led_toggle(5, slave_slock_cache); - } - -} - -#endif diff --git a/keyboards/ai03/orbit/transport.h b/keyboards/ai03/orbit/transport.h deleted file mode 100644 index 757eae6f5c..0000000000 --- a/keyboards/ai03/orbit/transport.h +++ /dev/null @@ -1,42 +0,0 @@ -#pragma once - -#include "matrix.h" - -#define ROWS_PER_HAND (MATRIX_ROWS/2) - -typedef struct _Serial_s2m_buffer_t { - // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack - matrix_row_t smatrix[ROWS_PER_HAND]; -} Serial_s2m_buffer_t; - -typedef struct _Serial_m2s_buffer_t { -#ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; -#endif -#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) - rgblight_config_t rgblight_config; //not yet use - // - // When MCUs on both sides drive their respective RGB LED chains, - // it is necessary to synchronize, so it is necessary to communicate RGB information. - // In that case, define the RGBLIGHT_SPLIT macro. - // - // Otherwise, if the master side MCU drives both sides RGB LED chains, - // there is no need to communicate. -#endif - - uint8_t current_layer; - uint8_t nlock_led; - uint8_t clock_led; - uint8_t slock_led; - -} Serial_m2s_buffer_t; - -extern volatile Serial_s2m_buffer_t serial_s2m_buffer; -extern volatile Serial_m2s_buffer_t serial_m2s_buffer; - -void transport_master_init(void); -void transport_slave_init(void); - -// returns false if valid data not received from slave -bool transport_master(matrix_row_t matrix[]); -void transport_slave(matrix_row_t matrix[]); diff --git a/keyboards/amj96/matrix.c b/keyboards/amj96/matrix.c index 8e7bbaa791..ffd66d120f 100644 --- a/keyboards/amj96/matrix.c +++ b/keyboards/amj96/matrix.c @@ -108,12 +108,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/angel64/alpha/matrix.c b/keyboards/angel64/alpha/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/angel64/alpha/matrix.c +++ b/keyboards/angel64/alpha/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/angel64/rev1/matrix.c b/keyboards/angel64/rev1/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/angel64/rev1/matrix.c +++ b/keyboards/angel64/rev1/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/bpiphany/kitten_paw/matrix.c b/keyboards/bpiphany/kitten_paw/matrix.c index b59089cdf4..56114858f1 100644 --- a/keyboards/bpiphany/kitten_paw/matrix.c +++ b/keyboards/bpiphany/kitten_paw/matrix.c @@ -117,13 +117,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) { - if (debouncing) - return false; - else - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1<<col)); } diff --git a/keyboards/bpiphany/pegasushoof/2013/matrix.c b/keyboards/bpiphany/pegasushoof/2013/matrix.c index 037f323c00..09244982d9 100644 --- a/keyboards/bpiphany/pegasushoof/2013/matrix.c +++ b/keyboards/bpiphany/pegasushoof/2013/matrix.c @@ -110,13 +110,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) - return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/centromere/config.h b/keyboards/centromere/config.h index e502e2534b..b4cae20332 100644 --- a/keyboards/centromere/config.h +++ b/keyboards/centromere/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 500000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/centromere/matrix.c b/keyboards/centromere/matrix.c index 7256cd5cb5..bbd771f41b 100644 --- a/keyboards/centromere/matrix.c +++ b/keyboards/centromere/matrix.c @@ -15,80 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(500000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF remote slave to send the matrix information - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates, erase the last set of data uint8_t uart_data[11] = {0}; @@ -96,58 +37,27 @@ uint8_t matrix_scan(void) //there are 10 bytes corresponding to 1w columns, and an end byte for (uint8_t i = 0; i < 11; i++) { //wait for the serial data, timeout if it's been too long - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/centromere/rules.mk b/keyboards/centromere/rules.mk index ed777e1b9e..113e1e6aff 100644 --- a/keyboards/centromere/rules.mk +++ b/keyboards/centromere/rules.mk @@ -11,16 +11,19 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge -NKRO_ENABLE = yes # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = yes # Unicode +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = no # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes +CUSTOM_MATRIX = lite -# # project specific files -SRC += matrix.c serial_uart.c +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c LAYOUTS = split_3x5_3 split_3x6_3 diff --git a/keyboards/chimera_ergo/config.h b/keyboards/chimera_ergo/config.h index 0767a218b5..3c0cc5c162 100644 --- a/keyboards/chimera_ergo/config.h +++ b/keyboards/chimera_ergo/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/chimera_ergo/matrix.c b/keyboards/chimera_ergo/matrix.c index 577176c466..603ad0f386 100644 --- a/keyboards/chimera_ergo/matrix.c +++ b/keyboards/chimera_ergo/matrix.c @@ -15,89 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[14] = {0}; @@ -107,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/chimera_ergo/rules.mk b/keyboards/chimera_ergo/rules.mk index a8bd3a027a..8cb1736147 100644 --- a/keyboards/chimera_ergo/rules.mk +++ b/keyboards/chimera_ergo/rules.mk @@ -8,13 +8,16 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite -# # project specific files -SRC += matrix.c serial_uart.c +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/chimera_ls/config.h b/keyboards/chimera_ls/config.h index 2eb028471d..ca92e1e2e4 100644 --- a/keyboards/chimera_ls/config.h +++ b/keyboards/chimera_ls/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/chimera_ls/matrix.c b/keyboards/chimera_ls/matrix.c index 9edd91818f..a92c3e8431 100644 --- a/keyboards/chimera_ls/matrix.c +++ b/keyboards/chimera_ls/matrix.c @@ -15,93 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#elif (MATRIX_COLS <= 64) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse64(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop64(matrix[i]) -# define ROW_SHIFTER ((uint64_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} +#include "quantum.h" +#include "matrix.h" +#include "uart.h" -void matrix_init(void) { - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -111,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/chimera_ls/rules.mk b/keyboards/chimera_ls/rules.mk index 377c379911..b7f6db5aa5 100644 --- a/keyboards/chimera_ls/rules.mk +++ b/keyboards/chimera_ls/rules.mk @@ -8,16 +8,19 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c LAYOUTS = ortho_4x12 diff --git a/keyboards/chimera_ortho/config.h b/keyboards/chimera_ortho/config.h index 974502525c..3d86343a67 100644 --- a/keyboards/chimera_ortho/config.h +++ b/keyboards/chimera_ortho/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/chimera_ortho/matrix.c b/keyboards/chimera_ortho/matrix.c index 34930af7e2..a92c3e8431 100644 --- a/keyboards/chimera_ortho/matrix.c +++ b/keyboards/chimera_ortho/matrix.c @@ -15,79 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -97,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk index fbe6872001..8cb1736147 100644 --- a/keyboards/chimera_ortho/rules.mk +++ b/keyboards/chimera_ortho/rules.mk @@ -8,13 +8,16 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/chimera_ortho_plus/config.h b/keyboards/chimera_ortho_plus/config.h index 4b12796e95..ebffb85657 100644 --- a/keyboards/chimera_ortho_plus/config.h +++ b/keyboards/chimera_ortho_plus/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/chimera_ortho_plus/matrix.c b/keyboards/chimera_ortho_plus/matrix.c index 818e05ac98..603ad0f386 100644 --- a/keyboards/chimera_ortho_plus/matrix.c +++ b/keyboards/chimera_ortho_plus/matrix.c @@ -15,79 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[14] = {0}; @@ -97,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 6; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/chimera_ortho_plus/rules.mk b/keyboards/chimera_ortho_plus/rules.mk index e99e79c327..0a8a31e7dd 100644 --- a/keyboards/chimera_ortho_plus/rules.mk +++ b/keyboards/chimera_ortho_plus/rules.mk @@ -17,7 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes -CUSTOM_MATRIX = yes +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/comet46/config.h b/keyboards/comet46/config.h index 067dabb103..5ea40c14c5 100644 --- a/keyboards/comet46/config.h +++ b/keyboards/comet46/config.h @@ -62,12 +62,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)|MOD_BIT(KC_RCTRL)) #define MODS_ALT_MASK (MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) #define MODS_GUI_MASK (MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)) - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/comet46/matrix.c b/keyboards/comet46/matrix.c index 34930af7e2..a92c3e8431 100644 --- a/keyboards/comet46/matrix.c +++ b/keyboards/comet46/matrix.c @@ -15,79 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -97,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk index 814622226a..e177fc6441 100644 --- a/keyboards/comet46/rules.mk +++ b/keyboards/comet46/rules.mk @@ -8,16 +8,18 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite # project specific files SRC += matrix.c \ i2c.c \ - ssd1306.c \ - serial_uart.c + ssd1306.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/converter/palm_usb/config.h b/keyboards/converter/palm_usb/config.h index 4afc654e85..35032835cd 100644 --- a/keyboards/converter/palm_usb/config.h +++ b/keyboards/converter/palm_usb/config.h @@ -60,58 +60,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) - - -/* Serial(USART) configuration - * asynchronous, negative logic, 9600baud, no flow control - * 1-start bit, 8-data bit, non parity, 1-stop bit - */ -#define SERIAL_SOFT_BAUD 9600 -#define SERIAL_SOFT_PARITY_NONE -#define SERIAL_SOFT_BIT_ORDER_LSB -#if (HANDSPRING == 0) - #define SERIAL_SOFT_LOGIC_NEGATIVE //RS232 logic -#endif -/* RXD Port */ -#define SERIAL_SOFT_RXD_ENABLE - -// we are using Pro micro pin 3 / D0 as serial -#define SERIAL_SOFT_RXD_DDR DDRD -#define SERIAL_SOFT_RXD_PORT PORTD -#define SERIAL_SOFT_RXD_PIN PIND -#define SERIAL_SOFT_RXD_BIT 0 -#define SERIAL_SOFT_RXD_VECT INT0_vect - -/* RXD Interupt */ -#define SERIAL_SOFT_RXD_INIT() do { \ - /* pin configuration: input with pull-up */ \ - SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ - SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ - /* enable interrupt: INT0(rising edge) */ \ - EICRA |= ((1<<ISC01)|(1<<ISC00)); \ - EIMSK |= (1<<INT0); \ - sei(); \ -} while (0) -#define SERIAL_SOFT_RXD_INT_ENTER() -#define SERIAL_SOFT_RXD_INT_EXIT() do { \ - /* clear interrupt flag */ \ - EIFR = (1<<INTF0); \ -} while (0) -#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) - -/* TXD Port */ -#define SERIAL_SOFT_TXD_ENABLE -#define SERIAL_SOFT_TXD_DDR DDRD -#define SERIAL_SOFT_TXD_PORT PORTD -#define SERIAL_SOFT_TXD_PIN PIND -#define SERIAL_SOFT_TXD_BIT 3 -#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0) -#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0) -#define SERIAL_SOFT_TXD_INIT() do { \ - /* pin configuration: output */ \ - SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \ - /* idle */ \ - SERIAL_SOFT_TXD_ON(); \ -} while (0) - - diff --git a/keyboards/converter/palm_usb/matrix.c b/keyboards/converter/palm_usb/matrix.c index 289284b616..010fd56c79 100644 --- a/keyboards/converter/palm_usb/matrix.c +++ b/keyboards/converter/palm_usb/matrix.c @@ -18,7 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H -#include "protocol/serial.h" +#include "uart.h" #include "timer.h" @@ -58,8 +58,6 @@ static uint16_t disconnect_counter = 0; #define COL(code) ((code & COL_MASK) ) #define KEYUP(code) ((code & KEY_MASK) >>7 ) -static bool is_modified = false; - __attribute__ ((weak)) void matrix_init_kb(void) { matrix_init_user(); @@ -166,7 +164,7 @@ uint8_t rts_reset(void) { uint8_t get_serial_byte(void) { static uint8_t code; while(1) { - code = serial_recv(); + code = uart_read(); if (code) { debug_hex(code); debug(" "); return code; @@ -242,7 +240,7 @@ void matrix_init(void) debug_enable = true; //debug_matrix =true; - serial_init(); // arguments all #defined + uart_init(9600); // arguments all #defined #if (HANDSPRING == 0) pins_init(); // set all inputs and outputs. @@ -292,7 +290,7 @@ void matrix_init(void) uint8_t matrix_scan(void) { uint8_t code; - code = serial_recv(); + code = uart_read(); if (!code) { /* disconnect_counter ++; @@ -354,11 +352,6 @@ uint8_t matrix_scan(void) return code; } -bool matrix_is_modified(void) -{ - return is_modified; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/converter/palm_usb/post_rules.mk b/keyboards/converter/palm_usb/post_rules.mk deleted file mode 100644 index 9c11076701..0000000000 --- a/keyboards/converter/palm_usb/post_rules.mk +++ /dev/null @@ -1,7 +0,0 @@ -ifdef HARDWARE_SERIAL - # Untested with palm_usb - SRC += protocol/serial_uart.c - OPT_DEFS += -DHARDWARE_SERIAL -else - SRC += protocol/serial_soft.c -endif diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk index c5e680b883..a1d2e39b23 100644 --- a/keyboards/converter/palm_usb/rules.mk +++ b/keyboards/converter/palm_usb/rules.mk @@ -20,5 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. CUSTOM_MATRIX = yes SRC += matrix.c +QUANTUM_LIB_SRC += uart.c DEFAULT_FOLDER = converter/palm_usb/stowaway diff --git a/keyboards/converter/sun_usb/command_extra.c b/keyboards/converter/sun_usb/command_extra.c index 756a9160bb..332776ab90 100644 --- a/keyboards/converter/sun_usb/command_extra.c +++ b/keyboards/converter/sun_usb/command_extra.c @@ -1,5 +1,5 @@ #include QMK_KEYBOARD_H -#include "protocol/serial.h" +#include "uart.h" bool sun_bell = false; bool sun_click = false; @@ -20,41 +20,41 @@ bool command_extra(uint8_t code) return false; case KC_DEL: print("Reset\n"); - serial_send(0x01); + uart_write(0x01); break; case KC_HOME: sun_bell = !sun_bell; if (sun_bell) { print("Bell On\n"); - serial_send(0x02); + uart_write(0x02); } else { print("Bell Off\n"); - serial_send(0x03); + uart_write(0x03); } break; case KC_END: sun_click = !sun_click; if (sun_click) { print("Click On\n"); - serial_send(0x0A); + uart_write(0x0A); } else { print("Click Off\n"); - serial_send(0x0B); + uart_write(0x0B); } break; case KC_PGUP: print("LED all on\n"); - serial_send(0x0E); - serial_send(0xFF); + uart_write(0x0E); + uart_write(0xFF); break; case KC_PGDOWN: print("LED all off\n"); - serial_send(0x0E); - serial_send(0x00); + uart_write(0x0E); + uart_write(0x00); break; case KC_INSERT: print("layout\n"); - serial_send(0x0F); + uart_write(0x0F); break; default: xprintf("Unknown extra command: %02X\n", code); diff --git a/keyboards/converter/sun_usb/config.h b/keyboards/converter/sun_usb/config.h index c67ae5ebae..0a4aa019f7 100644 --- a/keyboards/converter/sun_usb/config.h +++ b/keyboards/converter/sun_usb/config.h @@ -33,50 +33,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. get_mods() == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \ get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) - - -/* Serial(USART) configuration - * asynchronous, negative logic, 1200baud, no flow control - * 1-start bit, 8-data bit, non parity, 1-stop bit - */ -#define SERIAL_SOFT_BAUD 1200 -#define SERIAL_SOFT_PARITY_NONE -#define SERIAL_SOFT_BIT_ORDER_LSB -#define SERIAL_SOFT_LOGIC_NEGATIVE -/* RXD Port */ -#define SERIAL_SOFT_RXD_ENABLE -#define SERIAL_SOFT_RXD_DDR DDRD -#define SERIAL_SOFT_RXD_PORT PORTD -#define SERIAL_SOFT_RXD_PIN PIND -#define SERIAL_SOFT_RXD_BIT 2 -#define SERIAL_SOFT_RXD_VECT INT2_vect -/* RXD Interupt */ -#define SERIAL_SOFT_RXD_INIT() do { \ - /* pin configuration: input with pull-up */ \ - SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \ - SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \ - /* enable interrupt: INT2(rising edge) */ \ - EICRA |= ((1<<ISC21)|(1<<ISC20)); \ - EIMSK |= (1<<INT2); \ - sei(); \ -} while (0) -#define SERIAL_SOFT_RXD_INT_ENTER() -#define SERIAL_SOFT_RXD_INT_EXIT() do { \ - /* clear interrupt flag */ \ - EIFR = (1<<INTF2); \ -} while (0) -#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT)) -/* TXD Port */ -#define SERIAL_SOFT_TXD_ENABLE -#define SERIAL_SOFT_TXD_DDR DDRD -#define SERIAL_SOFT_TXD_PORT PORTD -#define SERIAL_SOFT_TXD_PIN PIND -#define SERIAL_SOFT_TXD_BIT 3 -#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0) -#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0) -#define SERIAL_SOFT_TXD_INIT() do { \ - /* pin configuration: output */ \ - SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \ - /* idle */ \ - SERIAL_SOFT_TXD_ON(); \ -} while (0) diff --git a/keyboards/converter/sun_usb/led.c b/keyboards/converter/sun_usb/led.c index a409699e92..f8d183fd48 100644 --- a/keyboards/converter/sun_usb/led.c +++ b/keyboards/converter/sun_usb/led.c @@ -16,7 +16,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H -#include "protocol/serial.h" +#include "uart.h" void led_set(uint8_t usb_led) { @@ -27,6 +27,6 @@ void led_set(uint8_t usb_led) if (usb_led & (1<<USB_LED_CAPS_LOCK)) sun_led |= (1<<3); xprintf("LED: %02X\n", usb_led); - serial_send(0x0E); - serial_send(sun_led); + uart_write(0x0E); + uart_write(sun_led); } diff --git a/keyboards/converter/sun_usb/matrix.c b/keyboards/converter/sun_usb/matrix.c index 21f45111ec..e28d165d52 100644 --- a/keyboards/converter/sun_usb/matrix.c +++ b/keyboards/converter/sun_usb/matrix.c @@ -16,7 +16,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include QMK_KEYBOARD_H -#include "protocol/serial.h" +#include "uart.h" /* * Matrix Array usage: @@ -38,8 +38,6 @@ static uint8_t matrix[MATRIX_ROWS]; #define ROW(code) ((code>>3)&0xF) #define COL(code) (code&0x07) -static bool is_modified = false; - __attribute__ ((weak)) void matrix_init_kb(void) { matrix_init_user(); @@ -76,7 +74,7 @@ void matrix_init(void) /* PORTD |= (1<<6); */ debug_enable = true; - serial_init(); + uart_init(1200); // initialize matrix state: all keys off for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; @@ -86,12 +84,12 @@ void matrix_init(void) /* print("Reseting "); */ /* while (1) { */ /* print("."); */ - /* while (serial_recv()); */ - /* serial_send(0x01); */ + /* while (uart_read()); */ + /* uart_write(0x01); */ /* _delay_ms(500); */ - /* if (serial_recv() == 0xFF) { */ + /* if (uart_read() == 0xFF) { */ /* _delay_ms(500); */ - /* if (serial_recv() == 0x04) */ + /* if (uart_read() == 0x04) */ /* break; */ /* } */ /* } */ @@ -106,7 +104,7 @@ void matrix_init(void) uint8_t matrix_scan(void) { uint8_t code; - code = serial_recv(); + code = uart_read(); if (!code) return 0; debug_hex(code); debug(" "); @@ -115,7 +113,7 @@ uint8_t matrix_scan(void) case 0xFF: // reset success: FF 04 print("reset: "); _delay_ms(500); - code = serial_recv(); + code = uart_read(); xprintf("%02X\n", code); if (code == 0x04) { // LED status @@ -125,12 +123,12 @@ uint8_t matrix_scan(void) case 0xFE: // layout: FE <layout> print("layout: "); _delay_ms(500); - xprintf("%02X\n", serial_recv()); + xprintf("%02X\n", uart_read()); return 0; case 0x7E: // reset fail: 7E 01 print("reset fail: "); _delay_ms(500); - xprintf("%02X\n", serial_recv()); + xprintf("%02X\n", uart_read()); return 0; case 0x7F: // all keys up @@ -154,11 +152,6 @@ uint8_t matrix_scan(void) return code; } -bool matrix_is_modified(void) -{ - return is_modified; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/converter/sun_usb/post_rules.mk b/keyboards/converter/sun_usb/post_rules.mk deleted file mode 100644 index 2ea1f0a5bf..0000000000 --- a/keyboards/converter/sun_usb/post_rules.mk +++ /dev/null @@ -1,6 +0,0 @@ -ifdef HARDWARE_SERIAL - SRC += protocol/serial_uart.c - OPT_DEFS += -DHARDWARE_SERIAL -else - SRC += protocol/serial_soft.c -endif diff --git a/keyboards/converter/sun_usb/rules.mk b/keyboards/converter/sun_usb/rules.mk index 2f2ddde1d0..d25bcc7ffa 100644 --- a/keyboards/converter/sun_usb/rules.mk +++ b/keyboards/converter/sun_usb/rules.mk @@ -20,5 +20,6 @@ RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. CUSTOM_MATRIX = yes SRC += matrix.c led.c +QUANTUM_LIB_SRC += uart.c DEFAULT_FOLDER = converter/sun_usb/type5 diff --git a/keyboards/converter/usb_usb/custom_matrix.cpp b/keyboards/converter/usb_usb/custom_matrix.cpp index 296f7fcd02..91986f6eb9 100644 --- a/keyboards/converter/usb_usb/custom_matrix.cpp +++ b/keyboards/converter/usb_usb/custom_matrix.cpp @@ -192,10 +192,6 @@ extern "C" return 1; } - bool matrix_is_modified(void) { - return matrix_is_mod; - } - bool matrix_is_on(uint8_t row, uint8_t col) { uint8_t code = CODE(row, col); diff --git a/keyboards/bat43/.noci b/keyboards/dailycraft/bat43/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/bat43/.noci +++ b/keyboards/dailycraft/bat43/.noci diff --git a/keyboards/bat43/bat43.c b/keyboards/dailycraft/bat43/bat43.c index 5d52c672b6..5d52c672b6 100644 --- a/keyboards/bat43/bat43.c +++ b/keyboards/dailycraft/bat43/bat43.c diff --git a/keyboards/bat43/bat43.h b/keyboards/dailycraft/bat43/bat43.h index 42d44107b4..046788a0a1 100644 --- a/keyboards/bat43/bat43.h +++ b/keyboards/dailycraft/bat43/bat43.h @@ -1,9 +1,9 @@ #pragma once -#ifdef KEYBOARD_bat43_rev1 +#ifdef KEYBOARD_dailycraft_bat43_rev1 #include "rev1.h" #endif -#ifdef KEYBOARD_bat43_rev2 +#ifdef KEYBOARD_dailycraft_bat43_rev2 #include "rev2.h" #endif diff --git a/keyboards/bat43/config.h b/keyboards/dailycraft/bat43/config.h index 19b485fd16..19b485fd16 100644 --- a/keyboards/bat43/config.h +++ b/keyboards/dailycraft/bat43/config.h diff --git a/keyboards/bat43/keymaps/default/keymap.c b/keyboards/dailycraft/bat43/keymaps/default/keymap.c index 5e4faccf98..5e4faccf98 100644 --- a/keyboards/bat43/keymaps/default/keymap.c +++ b/keyboards/dailycraft/bat43/keymaps/default/keymap.c diff --git a/keyboards/bat43/keymaps/default/readme.md b/keyboards/dailycraft/bat43/keymaps/default/readme.md index f72376d89e..f72376d89e 100644 --- a/keyboards/bat43/keymaps/default/readme.md +++ b/keyboards/dailycraft/bat43/keymaps/default/readme.md diff --git a/keyboards/bat43/keymaps/via/keymap.c b/keyboards/dailycraft/bat43/keymaps/via/keymap.c index 0bd07b6017..0bd07b6017 100644 --- a/keyboards/bat43/keymaps/via/keymap.c +++ b/keyboards/dailycraft/bat43/keymaps/via/keymap.c diff --git a/keyboards/bat43/keymaps/via/readme.md b/keyboards/dailycraft/bat43/keymaps/via/readme.md index f72376d89e..f72376d89e 100644 --- a/keyboards/bat43/keymaps/via/readme.md +++ b/keyboards/dailycraft/bat43/keymaps/via/readme.md diff --git a/keyboards/bat43/keymaps/via/rules.mk b/keyboards/dailycraft/bat43/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/bat43/keymaps/via/rules.mk +++ b/keyboards/dailycraft/bat43/keymaps/via/rules.mk diff --git a/keyboards/bat43/readme.md b/keyboards/dailycraft/bat43/readme.md index 7097aa7af5..6b58aa5ca3 100644 --- a/keyboards/bat43/readme.md +++ b/keyboards/dailycraft/bat43/readme.md @@ -6,10 +6,21 @@ A 43-key keyboard. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: bat43 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make bat43:default + make dailycraft/bat43:default + +Flashing example for this keyboard: + + make dailycraft/bat43:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/bat43/rev1/.noci b/keyboards/dailycraft/bat43/rev1/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/bat43/rev1/.noci +++ b/keyboards/dailycraft/bat43/rev1/.noci diff --git a/keyboards/bat43/rev1/info.json b/keyboards/dailycraft/bat43/rev1/info.json index 0384bb5feb..0384bb5feb 100644 --- a/keyboards/bat43/rev1/info.json +++ b/keyboards/dailycraft/bat43/rev1/info.json diff --git a/keyboards/bat43/rev1/rev1.c b/keyboards/dailycraft/bat43/rev1/rev1.c index cff7598740..cff7598740 100644 --- a/keyboards/bat43/rev1/rev1.c +++ b/keyboards/dailycraft/bat43/rev1/rev1.c diff --git a/keyboards/bat43/rev1/rev1.h b/keyboards/dailycraft/bat43/rev1/rev1.h index cf21486a9e..cf21486a9e 100644 --- a/keyboards/bat43/rev1/rev1.h +++ b/keyboards/dailycraft/bat43/rev1/rev1.h diff --git a/keyboards/bat43/rev1/rules.mk b/keyboards/dailycraft/bat43/rev1/rules.mk index 8b13789179..8b13789179 100644 --- a/keyboards/bat43/rev1/rules.mk +++ b/keyboards/dailycraft/bat43/rev1/rules.mk diff --git a/keyboards/bat43/rev2/.noci b/keyboards/dailycraft/bat43/rev2/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/bat43/rev2/.noci +++ b/keyboards/dailycraft/bat43/rev2/.noci diff --git a/keyboards/bat43/rev2/info.json b/keyboards/dailycraft/bat43/rev2/info.json index 352d9a6beb..352d9a6beb 100644 --- a/keyboards/bat43/rev2/info.json +++ b/keyboards/dailycraft/bat43/rev2/info.json diff --git a/keyboards/bat43/rev2/rev2.c b/keyboards/dailycraft/bat43/rev2/rev2.c index cffc0acd32..cffc0acd32 100644 --- a/keyboards/bat43/rev2/rev2.c +++ b/keyboards/dailycraft/bat43/rev2/rev2.c diff --git a/keyboards/bat43/rev2/rev2.h b/keyboards/dailycraft/bat43/rev2/rev2.h index f84cdbaa4d..f84cdbaa4d 100644 --- a/keyboards/bat43/rev2/rev2.h +++ b/keyboards/dailycraft/bat43/rev2/rev2.h diff --git a/keyboards/bat43/rev2/rules.mk b/keyboards/dailycraft/bat43/rev2/rules.mk index 8b13789179..8b13789179 100644 --- a/keyboards/bat43/rev2/rules.mk +++ b/keyboards/dailycraft/bat43/rev2/rules.mk diff --git a/keyboards/bat43/rules.mk b/keyboards/dailycraft/bat43/rules.mk index 7bd7394e4f..c2e1c5755f 100644 --- a/keyboards/bat43/rules.mk +++ b/keyboards/dailycraft/bat43/rules.mk @@ -17,4 +17,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -DEFAULT_FOLDER = bat43/rev2 +DEFAULT_FOLDER = dailycraft/bat43/rev2 diff --git a/keyboards/claw44/.noci b/keyboards/dailycraft/claw44/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/claw44/.noci +++ b/keyboards/dailycraft/claw44/.noci diff --git a/keyboards/claw44/claw44.c b/keyboards/dailycraft/claw44/claw44.c index d87103065c..d87103065c 100644 --- a/keyboards/claw44/claw44.c +++ b/keyboards/dailycraft/claw44/claw44.c diff --git a/keyboards/claw44/claw44.h b/keyboards/dailycraft/claw44/claw44.h index 4ca25fcb2b..76ecda6e90 100644 --- a/keyboards/claw44/claw44.h +++ b/keyboards/dailycraft/claw44/claw44.h @@ -1,5 +1,5 @@ #pragma once -#ifdef KEYBOARD_claw44_rev1 +#ifdef KEYBOARD_dailycraft_claw44_rev1 #include "rev1.h" #endif diff --git a/keyboards/claw44/config.h b/keyboards/dailycraft/claw44/config.h index 0bd74ff833..0bd74ff833 100644 --- a/keyboards/claw44/config.h +++ b/keyboards/dailycraft/claw44/config.h diff --git a/keyboards/claw44/keymaps/default/config.h b/keyboards/dailycraft/claw44/keymaps/default/config.h index 98469e4ccf..98469e4ccf 100644 --- a/keyboards/claw44/keymaps/default/config.h +++ b/keyboards/dailycraft/claw44/keymaps/default/config.h diff --git a/keyboards/claw44/keymaps/default/keymap.c b/keyboards/dailycraft/claw44/keymaps/default/keymap.c index 204c0c94e6..204c0c94e6 100644 --- a/keyboards/claw44/keymaps/default/keymap.c +++ b/keyboards/dailycraft/claw44/keymaps/default/keymap.c diff --git a/keyboards/claw44/keymaps/oled/config.h b/keyboards/dailycraft/claw44/keymaps/oled/config.h index 5379ce677d..5379ce677d 100644 --- a/keyboards/claw44/keymaps/oled/config.h +++ b/keyboards/dailycraft/claw44/keymaps/oled/config.h diff --git a/keyboards/claw44/keymaps/oled/keymap.c b/keyboards/dailycraft/claw44/keymaps/oled/keymap.c index 1778ac6167..1778ac6167 100644 --- a/keyboards/claw44/keymaps/oled/keymap.c +++ b/keyboards/dailycraft/claw44/keymaps/oled/keymap.c diff --git a/keyboards/claw44/keymaps/oled/rules.mk b/keyboards/dailycraft/claw44/keymaps/oled/rules.mk index d34d066ded..d34d066ded 100644 --- a/keyboards/claw44/keymaps/oled/rules.mk +++ b/keyboards/dailycraft/claw44/keymaps/oled/rules.mk diff --git a/keyboards/claw44/keymaps/via/config.h b/keyboards/dailycraft/claw44/keymaps/via/config.h index 98469e4ccf..98469e4ccf 100644 --- a/keyboards/claw44/keymaps/via/config.h +++ b/keyboards/dailycraft/claw44/keymaps/via/config.h diff --git a/keyboards/claw44/keymaps/via/keymap.c b/keyboards/dailycraft/claw44/keymaps/via/keymap.c index 5373b76876..5373b76876 100644 --- a/keyboards/claw44/keymaps/via/keymap.c +++ b/keyboards/dailycraft/claw44/keymaps/via/keymap.c diff --git a/keyboards/chili/keymaps/via/rules.mk b/keyboards/dailycraft/claw44/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/chili/keymaps/via/rules.mk +++ b/keyboards/dailycraft/claw44/keymaps/via/rules.mk diff --git a/keyboards/claw44/lib/glcdfont.c b/keyboards/dailycraft/claw44/lib/glcdfont.c index 9fa1c806aa..9fa1c806aa 100644 --- a/keyboards/claw44/lib/glcdfont.c +++ b/keyboards/dailycraft/claw44/lib/glcdfont.c diff --git a/keyboards/claw44/readme.md b/keyboards/dailycraft/claw44/readme.md index 7e72e08971..e533bd7c82 100644 --- a/keyboards/claw44/readme.md +++ b/keyboards/dailycraft/claw44/readme.md @@ -4,12 +4,23 @@ A split keyboard with 3x6 vertically staggered keys and 4 thumb keys. -Keyboard Maintainer: [@yfuku_](https://twitter.com/yfuku_) -Hardware Supported: Claw44 PCB, ProMicro -Hardware Availability: https://yfuku.booth.pm/ +* Keyboard Maintainer: [yfuku](https://github.com/yfuku) +* Hardware Supported: Claw44 PCB, ProMicro +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make claw44:default + make dailycraft/claw44:default + +Flashing example for this keyboard: + + make dailycraft/claw44:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/claw44/rev1/.noci b/keyboards/dailycraft/claw44/rev1/.noci index e69de29bb2..e69de29bb2 100644 --- a/keyboards/claw44/rev1/.noci +++ b/keyboards/dailycraft/claw44/rev1/.noci diff --git a/keyboards/claw44/rev1/config.h b/keyboards/dailycraft/claw44/rev1/config.h index 8116b605cd..8116b605cd 100644 --- a/keyboards/claw44/rev1/config.h +++ b/keyboards/dailycraft/claw44/rev1/config.h diff --git a/keyboards/claw44/rev1/info.json b/keyboards/dailycraft/claw44/rev1/info.json index 3301e7d2ec..3301e7d2ec 100644 --- a/keyboards/claw44/rev1/info.json +++ b/keyboards/dailycraft/claw44/rev1/info.json diff --git a/keyboards/claw44/rev1/readme.md b/keyboards/dailycraft/claw44/rev1/readme.md index 5ad967af80..5ad967af80 100644 --- a/keyboards/claw44/rev1/readme.md +++ b/keyboards/dailycraft/claw44/rev1/readme.md diff --git a/keyboards/claw44/rev1/rev1.c b/keyboards/dailycraft/claw44/rev1/rev1.c index 520a869e57..520a869e57 100644 --- a/keyboards/claw44/rev1/rev1.c +++ b/keyboards/dailycraft/claw44/rev1/rev1.c diff --git a/keyboards/claw44/rev1/rev1.h b/keyboards/dailycraft/claw44/rev1/rev1.h index 9a05977153..9a05977153 100644 --- a/keyboards/claw44/rev1/rev1.h +++ b/keyboards/dailycraft/claw44/rev1/rev1.h diff --git a/keyboards/claw44/rev1/rules.mk b/keyboards/dailycraft/claw44/rev1/rules.mk index a66eb7d352..a66eb7d352 100644 --- a/keyboards/claw44/rev1/rules.mk +++ b/keyboards/dailycraft/claw44/rev1/rules.mk diff --git a/keyboards/claw44/rules.mk b/keyboards/dailycraft/claw44/rules.mk index 6ba5e853fb..69c59f28e6 100644 --- a/keyboards/claw44/rules.mk +++ b/keyboards/dailycraft/claw44/rules.mk @@ -17,4 +17,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -DEFAULT_FOLDER = claw44/rev1 +DEFAULT_FOLDER = dailycraft/claw44/rev1 diff --git a/keyboards/owl8/config.h b/keyboards/dailycraft/owl8/config.h index d28fd9c927..d28fd9c927 100644 --- a/keyboards/owl8/config.h +++ b/keyboards/dailycraft/owl8/config.h diff --git a/keyboards/owl8/info.json b/keyboards/dailycraft/owl8/info.json index e50484ba90..e50484ba90 100644 --- a/keyboards/owl8/info.json +++ b/keyboards/dailycraft/owl8/info.json diff --git a/keyboards/owl8/keymaps/default/keymap.c b/keyboards/dailycraft/owl8/keymaps/default/keymap.c index e840263639..e840263639 100644 --- a/keyboards/owl8/keymaps/default/keymap.c +++ b/keyboards/dailycraft/owl8/keymaps/default/keymap.c diff --git a/keyboards/owl8/keymaps/default/readme.md b/keyboards/dailycraft/owl8/keymaps/default/readme.md index e0129daa2d..e0129daa2d 100644 --- a/keyboards/owl8/keymaps/default/readme.md +++ b/keyboards/dailycraft/owl8/keymaps/default/readme.md diff --git a/keyboards/owl8/keymaps/via/keymap.c b/keyboards/dailycraft/owl8/keymaps/via/keymap.c index 6e3f6ea90b..6e3f6ea90b 100644 --- a/keyboards/owl8/keymaps/via/keymap.c +++ b/keyboards/dailycraft/owl8/keymaps/via/keymap.c diff --git a/keyboards/owl8/keymaps/via/readme.md b/keyboards/dailycraft/owl8/keymaps/via/readme.md index c4fa65987c..c4fa65987c 100644 --- a/keyboards/owl8/keymaps/via/readme.md +++ b/keyboards/dailycraft/owl8/keymaps/via/readme.md diff --git a/keyboards/claw44/keymaps/via/rules.mk b/keyboards/dailycraft/owl8/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/claw44/keymaps/via/rules.mk +++ b/keyboards/dailycraft/owl8/keymaps/via/rules.mk diff --git a/keyboards/owl8/owl8.c b/keyboards/dailycraft/owl8/owl8.c index a31289891a..a31289891a 100644 --- a/keyboards/owl8/owl8.c +++ b/keyboards/dailycraft/owl8/owl8.c diff --git a/keyboards/owl8/owl8.h b/keyboards/dailycraft/owl8/owl8.h index 5e561f580c..5e561f580c 100644 --- a/keyboards/owl8/owl8.h +++ b/keyboards/dailycraft/owl8/owl8.h diff --git a/keyboards/owl8/readme.md b/keyboards/dailycraft/owl8/readme.md index b40a5f35cb..c7fab17476 100644 --- a/keyboards/owl8/readme.md +++ b/keyboards/dailycraft/owl8/readme.md @@ -6,14 +6,21 @@ macropad * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: owl8 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make owl8:default + make dailycraft/owl8:default Flashing example for this keyboard: - make owl8:default:flash + make dailycraft/owl8:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/owl8/rules.mk b/keyboards/dailycraft/owl8/rules.mk index 284ea23e78..284ea23e78 100644 --- a/keyboards/owl8/rules.mk +++ b/keyboards/dailycraft/owl8/rules.mk diff --git a/keyboards/wings42/config.h b/keyboards/dailycraft/wings42/config.h index cfb6bf4ffc..cfb6bf4ffc 100644 --- a/keyboards/wings42/config.h +++ b/keyboards/dailycraft/wings42/config.h diff --git a/keyboards/wings42/rev1/readme.md b/keyboards/dailycraft/wings42/readme.md index 4ddfe3e83c..c919653397 100644 --- a/keyboards/wings42/rev1/readme.md +++ b/keyboards/dailycraft/wings42/readme.md @@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: wings42 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make wings42/rev1:default + make dailycraft/wings42:default Flashing example for this keyboard: - make wings42/rev1:default:flash + make dailycraft/wings42:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/) +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wings42/rev1/config.h b/keyboards/dailycraft/wings42/rev1/config.h index cfb4274921..cfb4274921 100644 --- a/keyboards/wings42/rev1/config.h +++ b/keyboards/dailycraft/wings42/rev1/config.h diff --git a/keyboards/wings42/rev1/keymaps/default/keymap.c b/keyboards/dailycraft/wings42/rev1/keymaps/default/keymap.c index 442ba5ed9f..442ba5ed9f 100644 --- a/keyboards/wings42/rev1/keymaps/default/keymap.c +++ b/keyboards/dailycraft/wings42/rev1/keymaps/default/keymap.c diff --git a/keyboards/wings42/rev1/keymaps/default/readme.md b/keyboards/dailycraft/wings42/rev1/keymaps/default/readme.md index d99098ad0c..d99098ad0c 100644 --- a/keyboards/wings42/rev1/keymaps/default/readme.md +++ b/keyboards/dailycraft/wings42/rev1/keymaps/default/readme.md diff --git a/keyboards/wings42/rev1/keymaps/via/keymap.c b/keyboards/dailycraft/wings42/rev1/keymaps/via/keymap.c index 442ba5ed9f..442ba5ed9f 100644 --- a/keyboards/wings42/rev1/keymaps/via/keymap.c +++ b/keyboards/dailycraft/wings42/rev1/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/via/rules.mk b/keyboards/dailycraft/wings42/rev1/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/via/rules.mk +++ b/keyboards/dailycraft/wings42/rev1/keymaps/via/rules.mk diff --git a/keyboards/wings42/rev1_extkeys/readme.md b/keyboards/dailycraft/wings42/rev1/readme.md index 7be464a141..959052c41d 100644 --- a/keyboards/wings42/rev1_extkeys/readme.md +++ b/keyboards/dailycraft/wings42/rev1/readme.md @@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: wings42 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make make wings42/rev1_extkeys:default + make dailycraft/wings42/rev1:default Flashing example for this keyboard: - make make wings42/rev1_extkeys:default:flash + make dailycraft/wings42/rev1:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/) +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wings42/rev1/rev1.c b/keyboards/dailycraft/wings42/rev1/rev1.c index dccf24c746..dccf24c746 100644 --- a/keyboards/wings42/rev1/rev1.c +++ b/keyboards/dailycraft/wings42/rev1/rev1.c diff --git a/keyboards/wings42/rev1/rev1.h b/keyboards/dailycraft/wings42/rev1/rev1.h index cd6e35a711..cd6e35a711 100644 --- a/keyboards/wings42/rev1/rev1.h +++ b/keyboards/dailycraft/wings42/rev1/rev1.h diff --git a/keyboards/wings42/rev1/rules.mk b/keyboards/dailycraft/wings42/rev1/rules.mk index e69de29bb2..e69de29bb2 100644 --- a/keyboards/wings42/rev1/rules.mk +++ b/keyboards/dailycraft/wings42/rev1/rules.mk diff --git a/keyboards/wings42/rev1_extkeys/config.h b/keyboards/dailycraft/wings42/rev1_extkeys/config.h index f0f04eca59..f0f04eca59 100644 --- a/keyboards/wings42/rev1_extkeys/config.h +++ b/keyboards/dailycraft/wings42/rev1_extkeys/config.h diff --git a/keyboards/wings42/rev1_extkeys/keymaps/default/keymap.c b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/default/keymap.c index 64a2b00c31..64a2b00c31 100644 --- a/keyboards/wings42/rev1_extkeys/keymaps/default/keymap.c +++ b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/default/keymap.c diff --git a/keyboards/wings42/rev1_extkeys/keymaps/default/readme.md b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/default/readme.md index d99098ad0c..d99098ad0c 100644 --- a/keyboards/wings42/rev1_extkeys/keymaps/default/readme.md +++ b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/default/readme.md diff --git a/keyboards/wings42/rev1_extkeys/keymaps/via/keymap.c b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/via/keymap.c index 97c77e182b..97c77e182b 100644 --- a/keyboards/wings42/rev1_extkeys/keymaps/via/keymap.c +++ b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/via/keymap.c diff --git a/keyboards/owl8/keymaps/via/rules.mk b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/owl8/keymaps/via/rules.mk +++ b/keyboards/dailycraft/wings42/rev1_extkeys/keymaps/via/rules.mk diff --git a/keyboards/wings42/readme.md b/keyboards/dailycraft/wings42/rev1_extkeys/readme.md index fc71d58ab6..4a34063ad4 100644 --- a/keyboards/wings42/readme.md +++ b/keyboards/dailycraft/wings42/rev1_extkeys/readme.md @@ -6,14 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: wings42 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make wings42:default + make dailycraft/wings42/rev1_extkeys:default Flashing example for this keyboard: - make wings42:default:flash + make dailycraft/wings42/rev1_extkeys:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wings42/rev1_extkeys/rev1_extkeys.c b/keyboards/dailycraft/wings42/rev1_extkeys/rev1_extkeys.c index 3d0d203704..3d0d203704 100644 --- a/keyboards/wings42/rev1_extkeys/rev1_extkeys.c +++ b/keyboards/dailycraft/wings42/rev1_extkeys/rev1_extkeys.c diff --git a/keyboards/wings42/rev1_extkeys/rev1_extkeys.h b/keyboards/dailycraft/wings42/rev1_extkeys/rev1_extkeys.h index 2ad58047f1..2ad58047f1 100644 --- a/keyboards/wings42/rev1_extkeys/rev1_extkeys.h +++ b/keyboards/dailycraft/wings42/rev1_extkeys/rev1_extkeys.h diff --git a/keyboards/wings42/rev1_extkeys/rules.mk b/keyboards/dailycraft/wings42/rev1_extkeys/rules.mk index e69de29bb2..e69de29bb2 100644 --- a/keyboards/wings42/rev1_extkeys/rules.mk +++ b/keyboards/dailycraft/wings42/rev1_extkeys/rules.mk diff --git a/keyboards/wings42/rev2/config.h b/keyboards/dailycraft/wings42/rev2/config.h index 836833718c..836833718c 100644 --- a/keyboards/wings42/rev2/config.h +++ b/keyboards/dailycraft/wings42/rev2/config.h diff --git a/keyboards/wings42/rev2/keymaps/default/keymap.c b/keyboards/dailycraft/wings42/rev2/keymaps/default/keymap.c index df572a6f5a..df572a6f5a 100644 --- a/keyboards/wings42/rev2/keymaps/default/keymap.c +++ b/keyboards/dailycraft/wings42/rev2/keymaps/default/keymap.c diff --git a/keyboards/wings42/rev2/keymaps/default/readme.md b/keyboards/dailycraft/wings42/rev2/keymaps/default/readme.md index d99098ad0c..d99098ad0c 100644 --- a/keyboards/wings42/rev2/keymaps/default/readme.md +++ b/keyboards/dailycraft/wings42/rev2/keymaps/default/readme.md diff --git a/keyboards/wings42/rev2/keymaps/via/config.h b/keyboards/dailycraft/wings42/rev2/keymaps/via/config.h index 3e0c8d146a..3e0c8d146a 100644 --- a/keyboards/wings42/rev2/keymaps/via/config.h +++ b/keyboards/dailycraft/wings42/rev2/keymaps/via/config.h diff --git a/keyboards/wings42/rev2/keymaps/via/keymap.c b/keyboards/dailycraft/wings42/rev2/keymaps/via/keymap.c index e6b4ef840a..e6b4ef840a 100644 --- a/keyboards/wings42/rev2/keymaps/via/keymap.c +++ b/keyboards/dailycraft/wings42/rev2/keymaps/via/keymap.c diff --git a/keyboards/wings42/rev2/keymaps/via/rules.mk b/keyboards/dailycraft/wings42/rev2/keymaps/via/rules.mk index eea5e1e2a2..eea5e1e2a2 100644 --- a/keyboards/wings42/rev2/keymaps/via/rules.mk +++ b/keyboards/dailycraft/wings42/rev2/keymaps/via/rules.mk diff --git a/keyboards/wings42/rev2/readme.md b/keyboards/dailycraft/wings42/rev2/readme.md index 158372feb4..c919653397 100644 --- a/keyboards/wings42/rev2/readme.md +++ b/keyboards/dailycraft/wings42/rev2/readme.md @@ -6,16 +6,21 @@ A split keyboard with 3x6 vertically staggered keys and 3 thumb keys. * Keyboard Maintainer: [yfuku](https://github.com/yfuku) * Hardware Supported: wings42 PCB, Pro Micro -* Hardware Availability: https://yfuku.booth.pm/ +* Hardware Availability: https://shop.dailycraft.jp/ Make example for this keyboard (after setting up your build environment): - make wings42:default + make dailycraft/wings42:default Flashing example for this keyboard: - make wings42:default:flash + make dailycraft/wings42:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -A build guide for this keyboard can be found here: [wings42 build guide](https://yfuku.com/wings42/buildguide/) +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wings42/rev2/rev2.c b/keyboards/dailycraft/wings42/rev2/rev2.c index 96aa6cd314..96aa6cd314 100644 --- a/keyboards/wings42/rev2/rev2.c +++ b/keyboards/dailycraft/wings42/rev2/rev2.c diff --git a/keyboards/wings42/rev2/rev2.h b/keyboards/dailycraft/wings42/rev2/rev2.h index 4720592264..4720592264 100644 --- a/keyboards/wings42/rev2/rev2.h +++ b/keyboards/dailycraft/wings42/rev2/rev2.h diff --git a/keyboards/wings42/rev2/rules.mk b/keyboards/dailycraft/wings42/rev2/rules.mk index e69de29bb2..e69de29bb2 100644 --- a/keyboards/wings42/rev2/rules.mk +++ b/keyboards/dailycraft/wings42/rev2/rules.mk diff --git a/keyboards/wings42/rules.mk b/keyboards/dailycraft/wings42/rules.mk index 74e894efec..94459dbcc5 100644 --- a/keyboards/wings42/rules.mk +++ b/keyboards/dailycraft/wings42/rules.mk @@ -19,4 +19,4 @@ AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes -DEFAULT_FOLDER = wings42/rev2 +DEFAULT_FOLDER = dailycraft/wings42/rev2 diff --git a/keyboards/wings42/wings42.c b/keyboards/dailycraft/wings42/wings42.c index 824b6cfbb6..824b6cfbb6 100644 --- a/keyboards/wings42/wings42.c +++ b/keyboards/dailycraft/wings42/wings42.c diff --git a/keyboards/wings42/wings42.h b/keyboards/dailycraft/wings42/wings42.h index 9412b7117a..d839f04884 100644 --- a/keyboards/wings42/wings42.h +++ b/keyboards/dailycraft/wings42/wings42.h @@ -18,13 +18,13 @@ #include "quantum.h" -#ifdef KEYBOARD_wings42_rev1 +#ifdef KEYBOARD_dailycraft_wings42_rev1 # include "rev1.h" #endif -#ifdef KEYBOARD_wings42_rev1_extkeys +#ifdef KEYBOARD_dailycraft_wings42_rev1_extkeys # include "rev1_extkeys.h" #endif -#ifdef KEYBOARD_wings42_rev2 +#ifdef KEYBOARD_dailycraft_wings42_rev2 # include "rev2.h" #endif diff --git a/keyboards/dc01/arrow/matrix.c b/keyboards/dc01/arrow/matrix.c index 0102ad0fa4..b69e147914 100644 --- a/keyboards/dc01/arrow/matrix.c +++ b/keyboards/dc01/arrow/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c index bf5aba8497..084978a1fd 100644 --- a/keyboards/dc01/left/matrix.c +++ b/keyboards/dc01/left/matrix.c @@ -230,14 +230,6 @@ if (i2c_transaction(SLAVE_I2C_ADDRESS_NUMPAD, 0x1FFFF, 11)) { return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/numpad/matrix.c b/keyboards/dc01/numpad/matrix.c index 38130114eb..e8e2a1b14a 100644 --- a/keyboards/dc01/numpad/matrix.c +++ b/keyboards/dc01/numpad/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dc01/right/matrix.c b/keyboards/dc01/right/matrix.c index 544c8dc538..2509bd7d4c 100644 --- a/keyboards/dc01/right/matrix.c +++ b/keyboards/dc01/right/matrix.c @@ -206,14 +206,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/dichotomy/config.h b/keyboards/dichotomy/config.h index 03e19b1388..40e7f18e6f 100644 --- a/keyboards/dichotomy/config.h +++ b/keyboards/dichotomy/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/dichotomy/dichotomy.c b/keyboards/dichotomy/dichotomy.c index 967d7e603c..afd52cc8b3 100755 --- a/keyboards/dichotomy/dichotomy.c +++ b/keyboards/dichotomy/dichotomy.c @@ -1,11 +1,13 @@ #include "dichotomy.h" +//#include "uart.h" + void pointing_device_task(void){ /*report_mouse_t currentReport = {}; uint32_t timeout = 0; //the m character requests the RF slave to send the mouse report - SERIAL_UART_DATA = 'm'; + uart_write('m'); //trust the external inputs completely, erase old data uint8_t uart_data[5] = {0}; @@ -15,7 +17,7 @@ void pointing_device_task(void){ //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while(!uart_available()){ timeout++; if (timeout > 10000){ xprintf("\r\nTIMED OUT"); @@ -23,7 +25,7 @@ void pointing_device_task(void){ } } xprintf("\r\nGOT DATA for %d",i); - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, bytes 1-4 are movement and scroll diff --git a/keyboards/dichotomy/matrix.c b/keyboards/dichotomy/matrix.c index ed83bd452c..806b66d498 100755 --- a/keyboards/dichotomy/matrix.c +++ b/keyboards/dichotomy/matrix.c @@ -29,7 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "dichotomy.h" #include "pointing_device.h" #include "report.h" -#include "protocol/serial.h" +#include "uart.h" #if (MATRIX_COLS <= 8) # define print_matrix_header() print("\nr/c 01234567\n") @@ -94,7 +94,7 @@ uint8_t matrix_cols(void) { void matrix_init(void) { matrix_init_quantum(); - serial_init(); + uart_init(1000000); } uint8_t matrix_scan(void) @@ -104,7 +104,7 @@ uint8_t matrix_scan(void) uint32_t timeout = 0; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -114,14 +114,14 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while(!uart_available()){ timeout++; if (timeout > 10000){ xprintf("\r\nTime out in keyboard."); break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 diff --git a/keyboards/dichotomy/rules.mk b/keyboards/dichotomy/rules.mk index 2b5eb0360c..a6029e3dbf 100755 --- a/keyboards/dichotomy/rules.mk +++ b/keyboards/dichotomy/rules.mk @@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality # # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/dm9records/ergoinu/config.h b/keyboards/dm9records/ergoinu/config.h index 113eaf9f76..89ea9e7903 100644 --- a/keyboards/dm9records/ergoinu/config.h +++ b/keyboards/dm9records/ergoinu/config.h @@ -20,7 +20,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #pragma once #include "config_common.h" -#include "serial_config.h" /* USB Device descriptor parameter VID & PID are lisenced from microchip sublisence program, Don't use other project! */ @@ -30,11 +29,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MANUFACTURER Dm9Records #define PRODUCT ergoinu -#define TAPPING_FORCE_HOLD -#define TAPPING_TERM 100 - #define USE_SERIAL +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D2 + /* Select hand configuration */ #define MASTER_LEFT // #define MASTER_RIGHT @@ -49,6 +48,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_COLS 7 #define MATRIX_COL_PINS { B4, E6, D7, C6, D4, F5, F4 } +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/dm9records/ergoinu/ergoinu.c b/keyboards/dm9records/ergoinu/ergoinu.c index c6d099a148..a01ac0a25c 100644 --- a/keyboards/dm9records/ergoinu/ergoinu.c +++ b/keyboards/dm9records/ergoinu/ergoinu.c @@ -1 +1,18 @@ +/* +Copyright 2018 Takuya Urakawa<twitter:@hsgw> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + #include "ergoinu.h" diff --git a/keyboards/dm9records/ergoinu/ergoinu.h b/keyboards/dm9records/ergoinu/ergoinu.h index 43249a8440..c275d3fa27 100644 --- a/keyboards/dm9records/ergoinu/ergoinu.h +++ b/keyboards/dm9records/ergoinu/ergoinu.h @@ -19,10 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "quantum.h" -#ifdef RGBLIGHT_ENABLE -#include "ws2812.h" -#endif - #define LAYOUT( \ L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ L07, L08, L09, L10, L11, L12, L13, R07, R08, R09, R10, R11, R12, R13, \ @@ -41,4 +37,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. { R27, R26, R25, R24, R23, R22, R21 }, \ { KC_NO, KC_NO, R32, R31, R30, R29, R28 } \ } - diff --git a/keyboards/dm9records/ergoinu/keymaps/default/config.h b/keyboards/dm9records/ergoinu/keymaps/default/config.h deleted file mode 100644 index bb266f25e7..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2018 Takuya Urakawa <Twitter:@hsgw> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c index 00c5da820d..862b538829 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default/keymap.c +++ b/keyboards/dm9records/ergoinu/keymaps/default/keymap.c @@ -5,14 +5,6 @@ extern rgblight_config_t rgblight_config; #endif -#define JA_CLON KC_QUOT // : and + -#define JA_AT KC_LBRC // @ and ` -#define JA_HAT KC_EQL // ^ and ~ -#define JA_ENUN KC_RO // \ and _ (EN mark and UNder score) -#define JA_ENVL KC_JYEN // \ and | (EN mark and Vertical Line) -#define JA_LBRC KC_RBRC // [ and { -#define JA_RBRC KC_BSLS // ] and } - enum LAYER_NO { BASE = 0, META, @@ -24,33 +16,30 @@ enum CUSTOM_KEYCODES { RGB_TYPE, }; -// Fillers to make layering more clear -#define ______ KC_TRNS -#define XXXXXX KC_NO - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, - KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, + KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, MO(META),KC_LALT, KC_LGUI, KC_ENT, KC_SPC, KC_ENT, KC_BSPC, KC_RGUI, KC_RALT, MO(META) ), [META] = LAYOUT( MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, - ______, KC_CAPS, ______, ______, ______, ______, ______, ______, ______, ______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, - ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RGHT, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______ + _______, KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [CONF] = LAYOUT( - ______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX + + [CONF] = LAYOUT( + _______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ) }; diff --git a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk deleted file mode 100644 index 8567c2ae2e..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes - -# Uncomment these for debugging -# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) -# $(info -- OPT_DEFS=$(OPT_DEFS)) -# $(info ) diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h b/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h deleted file mode 100644 index bb266f25e7..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/config.h +++ /dev/null @@ -1,24 +0,0 @@ -/* -This is the c configuration file for the keymap - -Copyright 2012 Jun Wako <wakojun@gmail.com> -Copyright 2015 Jack Humbert -Copyright 2018 Takuya Urakawa <Twitter:@hsgw> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#pragma once - -#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c index a9a9f71f4d..32289c44db 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c +++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/keymap.c @@ -24,10 +24,6 @@ enum CUSTOM_KEYCODES { RGB_TYPE, }; -// Fillers to make layering more clear -#define ______ KC_TRNS -#define XXXXXX KC_NO - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [BASE] = LAYOUT( @@ -38,20 +34,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { MO(META),KC_LALT, KC_ZKHK, KC_BSPC, KC_SPC, KC_ENT, KC_BSPC, KC_MHEN, KC_KANA, MO(META) ), - [META] = LAYOUT( MO(CONF),KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, - ______, KC_CAPS, ______, KC_UP, ______, ______, ______, ______, ______, ______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, - ______, KC_LEFT, KC_DOWN, KC_RGHT, ______, ______, ______, ______, ______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, - ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_LEFT, KC_DOWN, KC_RGHT, - ______, ______, KC_RGUI, KC_DEL, KC_ENT, ______, KC_DEL, KC_HENK, KC_LGUI, ______ + _______, KC_CAPS, _______, KC_UP, _______, _______, _______, _______, _______, _______, KC_SLCK, KC_PSCR, KC_HOME, KC_END, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_PAUS, KC_PGUP, KC_UP, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, + _______, _______, KC_RGUI, KC_DEL, KC_ENT, _______, KC_DEL, KC_HENK, KC_LGUI, _______ ), - [CONF] = LAYOUT( - ______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, - XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX, XXXXXX + + [CONF] = LAYOUT( + _______, RGB_TYPE,RGB_MOD, RGB_VAI, RGB_HUI, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_RST, RGB_TOG, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_HUD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ) }; diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk deleted file mode 100644 index 97154be636..0000000000 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk +++ /dev/null @@ -1,18 +0,0 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes - -# Uncomment these for debugging -# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE)) -# $(info -- OPT_DEFS=$(OPT_DEFS)) -# $(info ) diff --git a/keyboards/dm9records/ergoinu/matrix.c b/keyboards/dm9records/ergoinu/matrix.c deleted file mode 100644 index b1c58f88fe..0000000000 --- a/keyboards/dm9records/ergoinu/matrix.c +++ /dev/null @@ -1,292 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "quantum.h" - -#include "serial.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; -uint8_t is_master = 0 ; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); -static uint8_t matrix_master_scan(void); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - - #ifdef DISABLE_PROMICRO_LEDs - writePinHigh(B0); - writePinHigh(D5); - #endif - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - is_master = has_usb(); - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) { - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - int ret=serial_update_buffers(); - if (ret ) { -#ifndef DISABLE_PROMICRO_LEDs - if(ret==2) writePinLow(B0); -#endif - return 1; - } -#ifndef DISABLE_PROMICRO_LEDs - writePinHigh(B0); -#endif - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} - -uint8_t matrix_scan(void) { - if (is_master) { - matrix_master_scan(); - }else{ - matrix_slave_scan(); - - int offset = (isLeftHand) ? ROWS_PER_HAND : 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[offset+i] = serial_master_buffer[i]; - } - - matrix_scan_quantum(); - } - return 1; -} - - -uint8_t matrix_master_scan(void) { - - int ret = _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_master_buffer[i] = matrix[offset+i]; - } - - if( serial_transaction() ) { -#ifndef DISABLE_PROMICRO_LEDs - // turn on the indicator led when halves are disconnected - writePinLow(D5); -#endif - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { -#ifndef DISABLE_PROMICRO_LEDs - // turn off the indicator led on no error - writePinHigh(D5); -#endif - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/dm9records/ergoinu/post_rules.mk b/keyboards/dm9records/ergoinu/post_rules.mk deleted file mode 100644 index 02aa48104c..0000000000 --- a/keyboards/dm9records/ergoinu/post_rules.mk +++ /dev/null @@ -1,9 +0,0 @@ -ifneq ($(strip $(ERGOINU)),) - ifeq ($(findstring promicroled, $(ERGOINU)), promicroled) - DISABLE_PROMICRO_LEDs = no - endif -endif - -ifeq ($(strip $(DISABLE_PROMICRO_LEDs)), yes) - OPT_DEFS += -DDISABLE_PROMICRO_LEDs -endif diff --git a/keyboards/dm9records/ergoinu/readme.md b/keyboards/dm9records/ergoinu/readme.md index de0a1c6c97..45f91dbac2 100644 --- a/keyboards/dm9records/ergoinu/readme.md +++ b/keyboards/dm9records/ergoinu/readme.md @@ -1,13 +1,12 @@ -ErgoInu -=== +# ErgoInu  An (Not Portable But Small) Ergonomic Split Keyboard. -Keyboard Maintainer: [hsgw](https://github.com/hsgw/) [twitter](https://twitter.com/hsgw) -Hardware Supported: Pro Micro -Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu) +* Keyboard Maintainer: [hsgw](https://github.com/hsgw/) [twitter](https://twitter.com/hsgw) +* Hardware Supported: Pro Micro +* Hardware Availability & Repository: [https://github.com/hsgw/ergoinu](https://github.com/hsgw/ergoinu) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/dm9records/ergoinu/rules.mk b/keyboards/dm9records/ergoinu/rules.mk index 0a634ee794..aba3644c9e 100644 --- a/keyboards/dm9records/ergoinu/rules.mk +++ b/keyboards/dm9records/ergoinu/rules.mk @@ -7,20 +7,14 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -SUBPROJECT_rev1 = no -USE_I2C = no # i2c is not supported -CUSTOM_MATRIX = yes -SRC += matrix.c serial.c split_util.c - -# ergoinu configs -DISABLE_PROMICRO_LEDs = yes +SPLIT_KEYBOARD = yes diff --git a/keyboards/dm9records/ergoinu/serial.c b/keyboards/dm9records/ergoinu/serial.c deleted file mode 100644 index 5919415877..0000000000 --- a/keyboards/dm9records/ergoinu/serial.c +++ /dev/null @@ -1,295 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifdef USE_SERIAL - -#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) - -// Serial pulse period in microseconds. -#define SELECT_SERIAL_SPEED 1 -#if SELECT_SERIAL_SPEED == 0 - // Very High speed - #define SERIAL_DELAY 4 // micro sec - #define READ_WRITE_START_ADJUST 30 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 1 - // High speed - #define SERIAL_DELAY 6 // micro sec - #define READ_WRITE_START_ADJUST 23 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 2 - // Middle speed - #define SERIAL_DELAY 12 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 3 - // Low speed - #define SERIAL_DELAY 24 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#elif SELECT_SERIAL_SPEED == 4 - // Very Low speed - #define SERIAL_DELAY 50 // micro sec - #define READ_WRITE_START_ADJUST 25 // cycles - #define READ_WRITE_WIDTH_ADJUST 10 // cycles -#else -#error Illegal Serial Speed -#endif - - -#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) -#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) - -#define SLAVE_INT_WIDTH 1 -#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_delay_half1(void) { - _delay_us(SERIAL_DELAY_HALF1); -} - -inline static -void serial_delay_half2(void) { - _delay_us(SERIAL_DELAY_HALF2); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input_with_pullup(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input_with_pullup(); - -#if SERIAL_PIN_MASK == _BV(PD0) - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -#elif SERIAL_PIN_MASK == _BV(PD2) - // Enable INT2 - EIMSK |= _BV(INT2); - // Trigger on falling edge of INT2 - EICRA &= ~(_BV(ISC20) | _BV(ISC21)); -#else - #error unknown SERIAL_PIN_MASK value -#endif -} - -// Used by the sender to synchronize timing with the reciver. -static -void sync_recv(void) { - for (int i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { - } - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); -} - -// Used by the reciver to send a synchronization signal to the sender. -static -void sync_send(void) { - serial_low(); - serial_delay(); - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - _delay_sub_us(READ_WRITE_START_ADJUST); - for ( uint8_t i = 0; i < 8; ++i) { - serial_delay_half1(); // read the middle of pulses - byte = (byte << 1) | serial_read_pin(); - _delay_sub_us(READ_WRITE_WIDTH_ADJUST); - serial_delay_half2(); - } - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 1<<7; - while( b ) { - if(data & b) { - serial_high(); - } else { - serial_low(); - } - b >>= 1; - serial_delay(); - } - serial_low(); // sync_send() / senc_recv() need raise edge -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - serial_output(); - - // slave send phase - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_slave_buffer[i]); - checksum += serial_slave_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // slave switch to input - sync_send(); //0 - serial_delay_half1(); //1 - serial_low(); //2 - serial_input_with_pullup(); //2 - serial_delay_half1(); //3 - - // slave recive phase - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_master_buffer[i] = serial_read_byte(); - checksum_computed += serial_master_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } - - sync_recv(); //weit master output to high -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -// 2 => checksum error -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(SLAVE_INT_WIDTH); - - // wait for the slaves response - serial_input_with_pullup(); - _delay_us(SLAVE_INT_RESPONSE_TIME); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - serial_output(); - serial_high(); - sei(); - return 1; - } - - // master recive phase - // if the slave is present syncronize with it - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - sync_recv(); - serial_slave_buffer[i] = serial_read_byte(); - checksum_computed += serial_slave_buffer[i]; - } - sync_recv(); - uint8_t checksum_received = serial_read_byte(); - - if (checksum_computed != checksum_received) { - serial_output(); - serial_high(); - sei(); - return 2; - } - - // master switch to output - sync_recv(); //0 - serial_delay(); //1 - serial_low(); //3 - serial_output(); // 3 - serial_delay_half1(); //4 - - // master send phase - uint8_t checksum = 0; - - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - sync_send(); - serial_write_byte(serial_master_buffer[i]); - checksum += serial_master_buffer[i]; - } - sync_send(); - serial_write_byte(checksum); - - // always, release the line when not in use - sync_send(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/dm9records/ergoinu/serial.h b/keyboards/dm9records/ergoinu/serial.h deleted file mode 100644 index 67cf06ac6b..0000000000 --- a/keyboards/dm9records/ergoinu/serial.h +++ /dev/null @@ -1,24 +0,0 @@ -#pragma once - -#include <stdbool.h> - -// //////////////////////////////////////////// -// Need Soft Serial defines in serial_config.h -// //////////////////////////////////////////// -// ex. -// #define SERIAL_PIN_DDR DDRD -// #define SERIAL_PIN_PORT PORTD -// #define SERIAL_PIN_INPUT PIND -// #define SERIAL_PIN_MASK _BV(PD?) ?=0,2 -// #define SERIAL_PIN_INTERRUPT INT?_vect ?=0,2 -// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -// #define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); diff --git a/keyboards/dm9records/ergoinu/serial_config.h b/keyboards/dm9records/ergoinu/serial_config.h deleted file mode 100644 index a16db684ca..0000000000 --- a/keyboards/dm9records/ergoinu/serial_config.h +++ /dev/null @@ -1,11 +0,0 @@ -#pragma once - -/* Soft Serial defines */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD2) -#define SERIAL_PIN_INTERRUPT INT2_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2 diff --git a/keyboards/dm9records/ergoinu/split_util.c b/keyboards/dm9records/ergoinu/split_util.c deleted file mode 100644 index 0cbc2c69c4..0000000000 --- a/keyboards/dm9records/ergoinu/split_util.c +++ /dev/null @@ -1,56 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" - -#include "serial.h" - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { - serial_master_init(); -} - -static void keyboard_slave_setup(void) { - serial_slave_init(); -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); -} diff --git a/keyboards/dm9records/ergoinu/split_util.h b/keyboards/dm9records/ergoinu/split_util.h deleted file mode 100644 index 11cfd5455a..0000000000 --- a/keyboards/dm9records/ergoinu/split_util.h +++ /dev/null @@ -1,12 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include "eeconfig.h" - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); diff --git a/keyboards/duck/jetfire/matrix.c b/keyboards/duck/jetfire/matrix.c index 2dd94a72ac..729fa6dd14 100644 --- a/keyboards/duck/jetfire/matrix.c +++ b/keyboards/duck/jetfire/matrix.c @@ -116,12 +116,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/durgod/boards/DURGOD_STM32_F070/bootloader_defs.h b/keyboards/durgod/boards/DURGOD_STM32_F070/bootloader_defs.h deleted file mode 100644 index 02c48c4e6d..0000000000 --- a/keyboards/durgod/boards/DURGOD_STM32_F070/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h b/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h index a7d95c51a9..d70f188178 100644 --- a/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h +++ b/keyboards/durgod/boards/DURGOD_STM32_F070/chconf.h @@ -21,7 +21,7 @@ #pragma once -#define CH_CFG_ST_FREQUENCY 10000 +#define CH_CFG_ST_FREQUENCY 1000 #define CH_CFG_ST_TIMEDELTA 0 diff --git a/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h b/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h index 6d67aa96aa..a24c1cee12 100644 --- a/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h +++ b/keyboards/durgod/boards/DURGOD_STM32_F070/mcuconf.h @@ -85,7 +85,7 @@ */ #define STM32_GPT_USE_TIM1 FALSE #define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM3 TRUE #define STM32_GPT_USE_TIM14 FALSE #define STM32_GPT_TIM1_IRQ_PRIORITY 2 #define STM32_GPT_TIM2_IRQ_PRIORITY 2 diff --git a/keyboards/durgod/dgk6x/config.h b/keyboards/durgod/dgk6x/config.h index 92673e5c24..a15ed86650 100644 --- a/keyboards/durgod/dgk6x/config.h +++ b/keyboards/durgod/dgk6x/config.h @@ -22,6 +22,9 @@ #define VENDOR_ID 0xD60D #define MANUFACTURER Hoksi Technology +#define USB_POLLING_INTERVAL_MS 1 +#define WAIT_US_TIMER GPTD3 + /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL diff --git a/keyboards/durgod/dgk6x/halconf.h b/keyboards/durgod/dgk6x/halconf.h index 1772f8e410..9c1c6e5280 100644 --- a/keyboards/durgod/dgk6x/halconf.h +++ b/keyboards/durgod/dgk6x/halconf.h @@ -19,4 +19,7 @@ #ifdef RGB_MATRIX_ENABLE #define HAL_USE_I2C TRUE #endif + +#define HAL_USE_GPT TRUE + #include_next <halconf.h> diff --git a/keyboards/durgod/dgk6x/rules.mk b/keyboards/durgod/dgk6x/rules.mk index 56c5b1ac24..660719104d 100644 --- a/keyboards/durgod/dgk6x/rules.mk +++ b/keyboards/durgod/dgk6x/rules.mk @@ -1,9 +1,11 @@ # MCU name # Actually F070, but close enough MCU = STM32F072 - BOARD = DURGOD_STM32_F070 +# Bootloader selection +BOOTLOADER = stm32-dfu + # Do not put the microcontroller into power saving mode NO_SUSPEND_POWER_DOWN = yes diff --git a/keyboards/durgod/k3x0/config.h b/keyboards/durgod/k3x0/config.h index ef73a71016..af543bb970 100644 --- a/keyboards/durgod/k3x0/config.h +++ b/keyboards/durgod/k3x0/config.h @@ -23,6 +23,9 @@ #define VENDOR_ID 0xD60D #define MANUFACTURER Hoksi Technology +#define USB_POLLING_INTERVAL_MS 1 +#define WAIT_US_TIMER GPTD3 + /* key matrix size (rows in specific keyboard variant) */ #define MATRIX_COLS 16 diff --git a/keyboards/durgod/k3x0/halconf.h b/keyboards/durgod/k3x0/halconf.h index fa20fe30a9..d2a9d8c7c0 100644 --- a/keyboards/durgod/k3x0/halconf.h +++ b/keyboards/durgod/k3x0/halconf.h @@ -19,4 +19,6 @@ #define HAL_USE_PAL TRUE #define PAL_USE_CALLBACKS TRUE +#define HAL_USE_GPT TRUE + #include_next <halconf.h> diff --git a/keyboards/ergodox_stm32/matrix.c b/keyboards/ergodox_stm32/matrix.c index 383bf9790a..094d4a9e0f 100644 --- a/keyboards/ergodox_stm32/matrix.c +++ b/keyboards/ergodox_stm32/matrix.c @@ -119,10 +119,6 @@ uint8_t matrix_scan(void) { return 0; } -bool matrix_is_modified(void) { - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); diff --git a/keyboards/ergodox_stm32/rules.mk b/keyboards/ergodox_stm32/rules.mk index 3a035cee01..3f7197cbf6 100644 --- a/keyboards/ergodox_stm32/rules.mk +++ b/keyboards/ergodox_stm32/rules.mk @@ -1,12 +1,8 @@ # MCU name MCU = STM32F103 - MCU_LDSCRIPT = stm32f103_bootloader BOARD = ST_NUCLEO64_F103RB -CFLAGS += "-Wno-error=deprecated" -EXTRAFLAGS = -O0 -g - BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/ergotaco/matrix.c b/keyboards/ergotaco/matrix.c index e5af1c27fd..16300a7e4f 100644 --- a/keyboards/ergotaco/matrix.c +++ b/keyboards/ergotaco/matrix.c @@ -199,11 +199,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/gboards/gergoplex/matrix.c b/keyboards/gboards/gergoplex/matrix.c index 716390241a..a075b85725 100644 --- a/keyboards/gboards/gergoplex/matrix.c +++ b/keyboards/gboards/gergoplex/matrix.c @@ -152,11 +152,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } diff --git a/keyboards/georgi/matrix.c b/keyboards/georgi/matrix.c index 438412102b..7d635ad8d7 100644 --- a/keyboards/georgi/matrix.c +++ b/keyboards/georgi/matrix.c @@ -220,11 +220,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/gergo/matrix.c b/keyboards/gergo/matrix.c index 655e729356..443e97132b 100644 --- a/keyboards/gergo/matrix.c +++ b/keyboards/gergo/matrix.c @@ -273,11 +273,6 @@ uint8_t matrix_scan(void) { return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h b/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h new file mode 100644 index 0000000000..fd8f1d6859 --- /dev/null +++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/config.h @@ -0,0 +1,20 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#if defined(RGB_MATRIX_ENABLE) + #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR + // number of milliseconds to wait until turning off RGB automatically + #define RGB_DISABLE_TIMEOUT 300000 // 300 seconds / 5 min + // start fading out before getting disabled + // fading out is timed (depending on the rgb_matrix_config.speed) to have finished before reaching RGB_DISABLE_TIMEOUT + #define RGB_DISABLE_WITH_FADE_OUT + #define RGB_DISABLE_WHEN_USB_SUSPENDED + // number of milliseconds to wait until activating RGB idle effects + #define RGB_IDLE_TIMEOUT 4500 // 4.5 seconds + // activate breathe effect when idle + #define RGB_IDLE_BREATHE + // fade in when we have been suspended + #define RGB_FADE_IN +#endif diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c b/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c new file mode 100644 index 0000000000..d5b64c153a --- /dev/null +++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/keymap.c @@ -0,0 +1,148 @@ +// Copyright 2021 Glorious, LLC <salman@pcgamingrace.com>, +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +#include "vitoni.h" + +enum layer_names { + _BASE, + _MOV, + _RGB +}; + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Prt Rotary(Mute) +// ~ 1 2 3 4 5 6 7 8 9 0 - (=) BackSpc Del +// Tab Q W E R T Y U I O P [ ] PgUp +// Caps A S D F G H J K L ; " # Enter PgDn +// Sh_L / Z X C V B N M , . ? Sh_R Up End +// Ct_L Win_L Alt_L SPACE Alt_R FN Ct_R Left Down Right + + + // + // This keyboard defaults to 6KRO instead of NKRO for compatibility reasons (some KVMs and BIOSes are incompatible with NKRO). + // Since this is, among other things, a "gaming" keyboard, a key combination to enable NKRO on the fly is provided for convenience. + // Press CAPS+N to toggle between 6KRO and NKRO. This setting is persisted to the EEPROM and thus persists between restarts. + [_BASE] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, + MO(_MOV), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, TG(_RGB),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_MOV] = LAYOUT( + RESET, KC_MYCM, KC_WHOM, KC_CALC, KC_MSEL, KC_MPRV, KC_MPLY, KC_MSTP, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [_RGB] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, RGB_MOD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_SPI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, RGB_SPD, + _______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI + ), + +}; +// clang-format on + +#if defined(ENCODER_ENABLE) +bool encoder_update_user(uint8_t index, bool clockwise) { + switch (get_highest_layer(layer_state)) { + case _MOV: + if (clockwise) { + tap_code16(C(KC_TAB)); + } else { + tap_code16(S(C(KC_TAB))); + } + break; +#if defined(RGB_MATRIX_ENABLE) + case _RGB: + if (clockwise) { + rgb_matrix_increase_val_noeeprom(); + } else { + rgb_matrix_decrease_val_noeeprom(); + } + break; +#endif // RGB_MATRIX_ENABLE + default: + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + break; + } + return true; +} +#endif // ENCODER_ENABLE + +#if defined(RGB_MATRIX_ENABLE) +/* +* Set up default RGB color. +*/ +void rgb_matrix_set_default_color(void) { + rgb_matrix_sethsv_noeeprom_user(HSV_CHARTREUSE); +} + +/* +* Set up RGB defaults. +*/ +void rgb_matrix_configure_default_settings(void) { + rgb_matrix_set_default_color(); +} + +void keyboard_post_init_user(void) { + rgb_matrix_enable_noeeprom(); + rgb_matrix_configure_default_settings(); +} + +/* +* Use RGB underglow to indicate specific layers. +*/ +layer_state_t layer_state_set_user(layer_state_t state) { + switch (get_highest_layer(state)) { + case _MOV: + rgb_matrix_sethsv_noeeprom_user(HSV_SPRINGGREEN); + break; + case _RGB: + rgb_matrix_sethsv_noeeprom_user(HSV_GREEN); + break; + default: // for any other layer + rgb_matrix_set_default_color(); + break; + } + return state; +} + +void matrix_scan_user(void) { + matrix_scan_user_rgb(); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_user_rgb(keycode, record)) { + return false; + } + + switch (keycode) { + case RESET: // when activating RESET mode for flashing + if (record->event.pressed) { + rgb_matrix_set_color_all(63, 0, 0); + rgb_matrix_driver.flush(); + } + return true; + } + return true; // Process all other keycodes normally +} +#endif // RGB_MATRIX_ENABLE diff --git a/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc b/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc new file mode 100644 index 0000000000..38a74a568b --- /dev/null +++ b/keyboards/gmmk/pro/iso/keymaps/vitoni/readme.adoc @@ -0,0 +1,104 @@ += ViToni's keymap for GMMK Pro ISO + +== Layout +Based on the stock layout but making use of CAPS as FN similar to laptop keyboards. +This frees up the left row for other uses (although not remapped yet). +Since both Delete and Insert are used for coding they are part of the CAPS layer as well. + +The differences are as follows: + +=== Layer 0 (`_BASE`) +Mostly stock + CAPS goes to layer `_MOV`. +FN toggles the layer `_RGB`. + +=== Layer 1 (`_MOV`), accessed by pressing `CAPS` on layer `_BASE` +[%header] +|=== +| Key / Action | Mapped to +| ESC | _RESET_ +| F1 | KC_MYCM +| F2 | KC_WHOM +| F3 | KC_CALC +| F4 | KC_MSEL +| F5 | KC_MPRV +| F6 | KC_MPLY +| F7 | KC_MSTP +| F8 | KC_MNXT +| F9 | KC_MUTE +| F10 | KC_VOLD +| F11 | KC_VOLU +| N | NK_TOGG +| Delete | Insert +| Left | Home +| Right | End +| Up | PgUp +| Down | PgDn +|=== + +=== Layer 2 (`_RGB`), accessed by pressing `FN` on layer `_BASE` +Revamped the stock FN layer to focus on RGB only. + +[%header] +|=== +| Key / Action | Mapped to +| Knob clockwise | Value/Brightness up +| Knob anti-clockwise | Value/Brightness down +| Backspace | _RESET_ +| Enter | RGB_TOG +| Del | RGB_MOD +| PgUp | RGB_RMOD +| PgDn | RGB_SPI +| End | RGB_SPD +| Left | RGB_HUD +| Right | RGB_HUI +| Up | RGB_SAI +| Down | RGB_SAD +|=== + +No other changes have been made. + +== RGB light + +The code customizing RGB light usage is decribed here: + +* link:../../../../../../users/vitoni/readme.adoc[/users/vitoni/readme.adoc] + +When using `RGB_DISABLE_TIMEOUT` addtional options are available: + +* `RGB_FADE_IN` makes the RGB lights fade in instead of setting the value/brightness to 100% (implicitly due to HSV including the brightness) when resuming after RGB lights have been turned off. +Fade in occurs when the keyboard is initialized and when the RGB brightness has been changed (e.g. suspending, fade out, etc.). +* `RGB_DISABLE_WITH_FADE_OUT` activates fade out before the keyboard is disabled by `RGB_DISABLE_TIMEOUT`. + +Parameters used to define the behavior are: +[%header] +|=== +|Key | Default | Description + +| RGB_MATRIX_MAXIMUM_BRIGHTNESS +| 200 (<= UNIT8_MAX) +| Maximum assumed value for brightness. +Used to calculate lead time for fade out before suspend timeout. + +|=== + +`RGB_IDLE_TIMEOUT` enables fading out after being idle for the defined time and allows +* `RGB_IDLE_BREATHE` also activates a brethe effect while idling. + +[%header] +|=== +|Key | Default | Description + +|RGB_IDLE_TIMEOUT +|4500 +|Time in milliseconds without activity before considered to be idle. + +|RGB_IDLE_MINIMUM_BRIGHTNESS +|`RGB_MATRIX_MAXIMUM_BRIGHTNESS` / 5 +|Brightness value RGB is dimmed to when starting to idle. + +When breathing used as the lower bound of the brightness value. + +|RGB_IDLE_MAXIMUM_BRIGHTNESS +|`RGB_MATRIX_MAXIMUM_BRIGHTNESS` * 2/5 +|Upper bound of brightness value of the RGB light while breathing. + +|=== diff --git a/keyboards/handwired/dactyl/matrix.c b/keyboards/handwired/dactyl/matrix.c index a21cd08e14..a70e8c5aca 100644 --- a/keyboards/handwired/dactyl/matrix.c +++ b/keyboards/handwired/dactyl/matrix.c @@ -281,14 +281,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/frenchdev/matrix.c b/keyboards/handwired/frenchdev/matrix.c index 5ab254a6f9..a043f78538 100644 --- a/keyboards/handwired/frenchdev/matrix.c +++ b/keyboards/handwired/frenchdev/matrix.c @@ -174,12 +174,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/not_so_minidox/config.h b/keyboards/handwired/not_so_minidox/config.h index de9286eda5..177552e2a6 100644 --- a/keyboards/handwired/not_so_minidox/config.h +++ b/keyboards/handwired/not_so_minidox/config.h @@ -40,6 +40,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define USE_SERIAL +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + //#define EE_HANDS #define MASTER_LEFT diff --git a/keyboards/handwired/not_so_minidox/i2c.c b/keyboards/handwired/not_so_minidox/i2c.c deleted file mode 100644 index 084c890c40..0000000000 --- a/keyboards/handwired/not_so_minidox/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/handwired/not_so_minidox/i2c.h b/keyboards/handwired/not_so_minidox/i2c.h deleted file mode 100644 index 8910e70f10..0000000000 --- a/keyboards/handwired/not_so_minidox/i2c.h +++ /dev/null @@ -1,46 +0,0 @@ -#pragma once - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); diff --git a/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c b/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c index 296a7a281d..435eed2f1f 100644 --- a/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c +++ b/keyboards/handwired/not_so_minidox/keymaps/default/keymap.c @@ -8,17 +8,10 @@ #define _QWERTY 0 #define _LOWER 1 #define _RAISE 2 -#define _ADJUST 16 +#define _ADJUST 3 -enum custom_keycodes { - QWERTY = SAFE_RANGE, - LOWER, - RAISE, - ADJUST, -}; - -#define KC_LOWR LOWER -#define KC_RASE RAISE +#define KC_LOWR MO(_LOWER) +#define KC_RASE MO(_RAISE) #define KC_RST RESET #define KC_CAD LCTL(LALT(KC_DEL)) @@ -72,45 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - if (record->event.pressed) { - layer_on(_ADJUST); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_ADJUST); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - } - return true; +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST); } diff --git a/keyboards/handwired/not_so_minidox/matrix.c b/keyboards/handwired/not_so_minidox/matrix.c deleted file mode 100644 index b7cec9370c..0000000000 --- a/keyboards/handwired/not_so_minidox/matrix.c +++ /dev/null @@ -1,308 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "config.h" -#include "quantum.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - setPinOutput(B0); - setPinOutput(D5); - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - int ret = _matrix_scan(); - - - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - writePinLow(D5); - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - writePinHigh(D5); - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); - -#ifdef USE_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_bin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/handwired/not_so_minidox/rules.mk b/keyboards/handwired/not_so_minidox/rules.mk index 3eab0fba7e..8f9772df22 100644 --- a/keyboards/handwired/not_so_minidox/rules.mk +++ b/keyboards/handwired/not_so_minidox/rules.mk @@ -7,19 +7,14 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control +EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Enable N-Key Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -USE_I2C = no -CUSTOM_MATRIX = yes -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c +SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/not_so_minidox/serial.c b/keyboards/handwired/not_so_minidox/serial.c deleted file mode 100644 index 74bcbb6bf6..0000000000 --- a/keyboards/handwired/not_so_minidox/serial.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifndef USE_I2C - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/handwired/not_so_minidox/serial.h b/keyboards/handwired/not_so_minidox/serial.h deleted file mode 100644 index 28fcc56ce7..0000000000 --- a/keyboards/handwired/not_so_minidox/serial.h +++ /dev/null @@ -1,23 +0,0 @@ -#pragma once - -#include "config.h" -#include <stdbool.h> - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); diff --git a/keyboards/handwired/not_so_minidox/split_util.c b/keyboards/handwired/not_so_minidox/split_util.c deleted file mode 100644 index 39639c3b4b..0000000000 --- a/keyboards/handwired/not_so_minidox/split_util.c +++ /dev/null @@ -1,84 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init (); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -void keyboard_slave_loop(void) { - matrix_init(); - - while (1) { - matrix_slave_scan(); - } -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); - - if (!has_usb()) { - keyboard_slave_loop(); - } -} diff --git a/keyboards/handwired/not_so_minidox/split_util.h b/keyboards/handwired/not_so_minidox/split_util.h deleted file mode 100644 index 807412cd38..0000000000 --- a/keyboards/handwired/not_so_minidox/split_util.h +++ /dev/null @@ -1,17 +0,0 @@ -#pragma once - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); diff --git a/keyboards/handwired/onekey/teensy_32/rules.mk b/keyboards/handwired/onekey/teensy_32/rules.mk index c1b90d0d2b..937c9d5103 100644 --- a/keyboards/handwired/onekey/teensy_32/rules.mk +++ b/keyboards/handwired/onekey/teensy_32/rules.mk @@ -1,5 +1,8 @@ # MCU name MCU = MK20DX256 +# Bootloader selection +BOOTLOADER = halfkay + # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/onekey/teensy_lc/rules.mk b/keyboards/handwired/onekey/teensy_lc/rules.mk index b3daabe317..0e3c7edf7a 100644 --- a/keyboards/handwired/onekey/teensy_lc/rules.mk +++ b/keyboards/handwired/onekey/teensy_lc/rules.mk @@ -2,5 +2,8 @@ MCU = MKL26Z64 USE_CHIBIOS_CONTRIB = yes +# Bootloader selection +BOOTLOADER = halfkay + # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/handwired/promethium/matrix.c b/keyboards/handwired/promethium/matrix.c index e3a41af288..90dbce14a9 100644 --- a/keyboards/handwired/promethium/matrix.c +++ b/keyboards/handwired/promethium/matrix.c @@ -148,14 +148,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) diff --git a/keyboards/handwired/pterodactyl/matrix.c b/keyboards/handwired/pterodactyl/matrix.c index 21e6a128df..d0f74802a0 100644 --- a/keyboards/handwired/pterodactyl/matrix.c +++ b/keyboards/handwired/pterodactyl/matrix.c @@ -282,14 +282,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) // deprecated and evidently not called. -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk b/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk index e83e9a7bba..c497bb2ee8 100644 --- a/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk +++ b/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk @@ -21,9 +21,7 @@ RGB_MATRIX_DRIVER = WS2812 POINTING_DEVICE_ENABLE = yes -MOUSE_SHARED_EP = no +POINTING_DEVICE_DRIVER = pmw3360 +MOUSE_SHARED_EP = yes SPLIT_KEYBOARD = yes - -SRC += drivers/sensors/pmw3360.c -QUANTUM_LIB_SRC += spi_master.c tm_sync.c diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/config.h index d7618912f7..b9d8e86c09 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/config.h @@ -52,5 +52,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define OLED_DISPLAY_128X64 -#define POINTING_DEVICE_TASK_THROTTLE #define POINTING_DEVICE_RIGHT diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index 958f694172..65f8a5260d 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -301,7 +301,7 @@ void oled_driver_render_logo_left(void) { # endif oled_set_cursor(6, 3); # if defined(KEYBOARD_handwired_tractyl_manuform_5x6_right) - render_pointing_dpi_status(0); + render_pointing_dpi_status(kb_config_data.device_cpi, 0); # endif oled_set_cursor(0, 4); } diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk index 37bbbb4dae..a689be3dd5 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk @@ -18,6 +18,4 @@ MOUSE_SHARED_EP = yes SPLIT_KEYBOARD = yes -QUANTUM_LIB_SRC += tm_sync.c - DEFAULT_FOLDER = handwired/tractyl_manuform/5x6_right/teensy2pp diff --git a/keyboards/handwired/tractyl_manuform/config.h b/keyboards/handwired/tractyl_manuform/config.h index cc8a7546f4..15c8102b8f 100644 --- a/keyboards/handwired/tractyl_manuform/config.h +++ b/keyboards/handwired/tractyl_manuform/config.h @@ -39,4 +39,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -#define SPLIT_TRANSACTION_IDS_KB RPC_ID_KB_CONFIG_SYNC, RPC_ID_POINTER_STATE_SYNC +#define SPLIT_POINTING_ENABLE +#define POINTING_DEVICE_TASK_THROTTLE_MS 1 + +#define SPLIT_TRANSACTION_IDS_KB RPC_ID_KB_CONFIG_SYNC diff --git a/keyboards/handwired/tractyl_manuform/tm_sync.c b/keyboards/handwired/tractyl_manuform/tm_sync.c deleted file mode 100644 index 549a17a22f..0000000000 --- a/keyboards/handwired/tractyl_manuform/tm_sync.c +++ /dev/null @@ -1,180 +0,0 @@ -/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> - * Copyright 2021 Dasky (@daskygit) - - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include QMK_KEYBOARD_H -#include "pointing_device.h" -#include "transactions.h" -#include <string.h> -#ifdef MOUSEKEY_ENABLE -# include "mousekey.h" -#endif - -// typedef struct { -// uint16_t device_cpi; -// } kb_config_data_t; - -kb_config_data_t kb_config; -static report_mouse_t shared_mouse_report; -extern const pointing_device_driver_t pointing_device_driver; - -void kb_pointer_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { - shared_mouse_report = pointing_device_driver.get_report(shared_mouse_report); - memcpy(target2initiator_buffer, &shared_mouse_report, sizeof(report_mouse_t)); - shared_mouse_report.x = 0; - shared_mouse_report.y = 0; - shared_mouse_report.h = 0; - shared_mouse_report.v = 0; -} - -void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { - if (initiator2target_buffer_size == sizeof(kb_config)) { - memcpy(&kb_config, initiator2target_buffer, sizeof(kb_config)); - } - - static uint16_t cpi = 0; - // Check if the state values are different - if (cpi != kb_config.device_cpi) { - cpi = kb_config.device_cpi; - if (!is_keyboard_left()) { - pointing_device_set_cpi(cpi); - } - } -} - -void keyboard_pre_init_sync(void) { - memset(&kb_config, 0, sizeof(kb_config)); - memset(&shared_mouse_report, 0, sizeof(shared_mouse_report)); -} - -void keyboard_post_init_sync(void) { - // Register keyboard state sync split transaction - transaction_register_rpc(RPC_ID_KB_CONFIG_SYNC, kb_config_sync_handler); - transaction_register_rpc(RPC_ID_POINTER_STATE_SYNC, kb_pointer_sync_handler); -} - -void housekeeping_task_sync(void) { - if (is_keyboard_master()) { - // Keep track of the last state, so that we can tell if we need to propagate to slave - static kb_config_data_t last_kb_config; - static uint32_t last_sync = 0; - bool needs_sync = false; - - // Check if the state values are different - if (memcmp(&kb_config, &last_kb_config, sizeof(kb_config))) { - needs_sync = true; - memcpy(&last_kb_config, &kb_config, sizeof(kb_config)); - } - // Send to slave every 500ms regardless of state change - if (timer_elapsed32(last_sync) > 500) { - needs_sync = true; - } - - // Perform the sync if requested - if (needs_sync) { - if (transaction_rpc_send(RPC_ID_KB_CONFIG_SYNC, sizeof(kb_config), &kb_config)) { - last_sync = timer_read32(); - } - } - } -} - -void trackball_set_cpi(uint16_t cpi) { - kb_config.device_cpi = cpi; - if (!is_keyboard_left()) { - pointing_device_set_cpi(cpi); - } -} - -void pointing_device_task(void) { - if (!is_keyboard_master()) { - return; - } - -#if defined(POINTING_DEVICE_TASK_THROTTLE) - static uint32_t last_exec = 0; - if (timer_elapsed32(last_exec) < 1) { - return; - } - last_exec = timer_read32(); -#endif - - report_mouse_t local_report = pointing_device_get_report(); - - // Gather report info -#ifdef POINTING_DEVICE_MOTION_PIN - if (!readPin(POINTING_DEVICE_MOTION_PIN)) -#endif -#if defined(POINTING_DEVICE_COMBINED) - local_report = pointing_device_driver.get_report(local_report); - transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &shared_mouse_report); - local_report.x = local_report.x | shared_mouse_report.x; - local_report.y = local_report.y | shared_mouse_report.y; - local_report.h = local_report.h | shared_mouse_report.h; - local_report.v = local_report.v | shared_mouse_report.v; -#elif defined(POINTING_DEVICE_LEFT) - if (is_keyboard_left()) { - local_report = pointing_device_driver.get_report(local_report); - } else { - transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &local_report); - } -#elif defined(POINTING_DEVICE_RIGHT) - if (!is_keyboard_left()) { - local_report = pointing_device_driver.get_report(local_report); - } else { - transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(report_mouse_t), &local_report); - } -#else -# error "You need to define the side(s) the pointing device is on. POINTING_DEVICE_COMBINED / POINTING_DEVICE_LEFT / POINTING_DEVICE_RIGHT" -#endif - - // Support rotation of the sensor data -#if defined(POINTING_DEVICE_ROTATION_90) || defined(POINTING_DEVICE_ROTATION_180) || defined(POINTING_DEVICE_ROTATION_270) - int8_t x = local_report.x, y = local_report.y; -# if defined(POINTING_DEVICE_ROTATION_90) - local_report.x = y; - local_report.y = -x; -# elif defined(POINTING_DEVICE_ROTATION_180) - local_report.x = -x; - local_report.y = -y; -# elif defined(POINTING_DEVICE_ROTATION_270) - local_report.x = -y; - local_report.y = x; -# else -# error "How the heck did you get here?!" -# endif -#endif - // Support Inverting the X and Y Axises -#if defined(POINTING_DEVICE_INVERT_X) - local_report.x = -local_report.x; -#endif -#if defined(POINTING_DEVICE_INVERT_Y) - local_report.y = -local_report.y; -#endif - - // allow kb to intercept and modify report - local_report = pointing_device_task_kb(local_report); - // combine with mouse report to ensure that the combined is sent correctly -#ifdef MOUSEKEY_ENABLE - report_mouse_t mousekey_report = mousekey_get_report(); - local_report.buttons = local_report.buttons | mousekey_report.buttons; -#endif -#if defined(POINTING_DEVICE_COMBINED) - local_report.buttons = local_report.buttons | shared_mouse_report.buttons; -#endif - pointing_device_set_report(local_report); - pointing_device_send(); -} diff --git a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c b/keyboards/handwired/tractyl_manuform/tractyl_manuform.c index 6095bfb7e2..5bdc57ca09 100644 --- a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c +++ b/keyboards/handwired/tractyl_manuform/tractyl_manuform.c @@ -17,7 +17,6 @@ #include "tractyl_manuform.h" #include "transactions.h" #include <string.h> -#include "drivers/sensors/pmw3360.h" #ifndef TRACKBALL_DPI_OPTIONS # define TRACKBALL_DPI_OPTIONS \ @@ -31,11 +30,10 @@ #endif keyboard_config_t keyboard_config; +kb_config_data_t kb_config_data; uint16_t dpi_array[] = TRACKBALL_DPI_OPTIONS; #define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t)) - - bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (!process_record_user(keycode, record)) { return false; @@ -49,7 +47,8 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE; } eeconfig_update_kb(keyboard_config.raw); - trackball_set_cpi(dpi_array[keyboard_config.dpi_config]); + kb_config_data.device_cpi = dpi_array[keyboard_config.dpi_config]; + pointing_device_set_cpi(kb_config_data.device_cpi); } #endif @@ -69,7 +68,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { return true; } -__attribute__((weak)) void keyboard_pre_init_sync(void) {} __attribute__((weak)) void keyboard_pre_init_sub(void) {} void keyboard_pre_init_kb(void) { // debug_enable = true; @@ -83,20 +81,22 @@ void keyboard_pre_init_kb(void) { writePin(DEBUG_LED_PIN, !debug_enable); #endif + memset(&kb_config_data, 0, sizeof(kb_config_data)); + keyboard_pre_init_sub(); - keyboard_pre_init_sync(); keyboard_pre_init_user(); } -__attribute__((weak)) void keyboard_post_init_sync(void) {} -void keyboard_post_init_kb(void) { - keyboard_post_init_sync(); +void keyboard_post_init_kb(void) { + transaction_register_rpc(RPC_ID_KB_CONFIG_SYNC, kb_config_sync_handler); + keyboard_post_init_user(); } #ifdef POINTING_DEVICE_ENABLE void pointing_device_init_kb(void) { - trackball_set_cpi(dpi_array[keyboard_config.dpi_config]); + kb_config_data.device_cpi = dpi_array[keyboard_config.dpi_config]; + pointing_device_set_cpi(kb_config_data.device_cpi); pointing_device_init_user(); } @@ -111,7 +111,8 @@ report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { void eeconfig_init_kb(void) { keyboard_config.dpi_config = TRACKBALL_DPI_DEFAULT; #ifdef POINTING_DEVICE_ENABLE - trackball_set_cpi(dpi_array[keyboard_config.dpi_config]); + kb_config_data.device_cpi = dpi_array[keyboard_config.dpi_config]; + pointing_device_set_cpi(kb_config_data.device_cpi); #endif eeconfig_update_kb(keyboard_config.raw); eeconfig_init_user(); @@ -135,12 +136,39 @@ void matrix_scan_kb(void) { matrix_scan_user(); } -__attribute__((weak)) void housekeeping_task_sync(void) {} -void housekeeping_task_kb(void) { - housekeeping_task_sync(); +void housekeeping_task_kb(void) { + if (is_keyboard_master()) { + // Keep track of the last state, so that we can tell if we need to propagate to slave + static kb_config_data_t last_kb_config; + static uint32_t last_sync = 0; + bool needs_sync = false; + + // Check if the state values are different + if (memcmp(&kb_config_data, &last_kb_config, sizeof(kb_config_data))) { + needs_sync = true; + memcpy(&last_kb_config, &kb_config_data, sizeof(kb_config_data)); + } + // Send to slave every 500ms regardless of state change + if (timer_elapsed32(last_sync) > 500) { + needs_sync = true; + } + + // Perform the sync if requested + if (needs_sync) { + if (transaction_rpc_send(RPC_ID_KB_CONFIG_SYNC, sizeof(kb_config_data), &kb_config_data)) { + last_sync = timer_read32(); + } + } + } // no need for user function, is called already } +void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { + if (initiator2target_buffer_size == sizeof(kb_config_data)) { + memcpy(&kb_config_data, initiator2target_buffer, sizeof(kb_config_data)); + } +} + #ifdef POINTING_DEVICE_ENABLE void matrix_power_up(void) { pointing_device_task(); } #endif diff --git a/keyboards/handwired/tractyl_manuform/tractyl_manuform.h b/keyboards/handwired/tractyl_manuform/tractyl_manuform.h index 6aa40fc18b..3f8aca4551 100644 --- a/keyboards/handwired/tractyl_manuform/tractyl_manuform.h +++ b/keyboards/handwired/tractyl_manuform/tractyl_manuform.h @@ -32,21 +32,26 @@ typedef union { }; } keyboard_config_t; +typedef union { + uint32_t raw; + struct { + uint16_t device_cpi; + }; +} kb_config_data_t; + extern keyboard_config_t keyboard_config; +extern kb_config_data_t kb_config_data; enum ploopy_keycodes { DPI_CONFIG = SAFE_RANGE, KEYMAP_SAFE_RANGE, }; -typedef struct { - uint16_t device_cpi; -} kb_config_data_t; - -void trackball_set_cpi(uint16_t cpi); void matrix_init_sub_kb(void); void matrix_scan_sub_kb(void); void keyboard_pre_init_sync(void); void keyboard_post_init_sync(void); void housekeeping_task_sync(void); + +void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer); diff --git a/keyboards/handwired/wakizashi40/config.h b/keyboards/handwired/wakizashi40/config.h new file mode 100644 index 0000000000..78f85f2197 --- /dev/null +++ b/keyboards/handwired/wakizashi40/config.h @@ -0,0 +1,20 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" +#define DYNAMIC_KEYMAP_LAYER_COUNT 12 diff --git a/keyboards/handwired/wakizashi40/info.json b/keyboards/handwired/wakizashi40/info.json new file mode 100644 index 0000000000..b64ab55116 --- /dev/null +++ b/keyboards/handwired/wakizashi40/info.json @@ -0,0 +1,88 @@ +{ + "manufacturer": "fumbucker", + "keyboard_name": "Wakizashi 40", + "maintainer": "fumbucker", + "debounce": 5, + "processor": "at90usb1286", + "diode_direction": "COL2ROW", + "features": { + "audio": false, + "backlight": false, + "bluetooth": false, + "bootmagic": true, + "command": false, + "console": true, + "extrakey": true, + "midi": false, + "mousekey": true, + "nkro": true, + "rgblight": false, + "unicode": false + }, + "matrix_pins": { + "cols": ["C5", "C4", "D2", "D3", "D4", "D5", "C6", "D7", "B0", "B1", "B2", "B3", "B4"], + "rows": ["C0", "C1", "C2", "C3"] + }, + "usb": { + "device_ver": "0x0001", + "pid": "0x7740", + "vid": "0x6662" + }, + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "TAB", "matrix": [0, 0], "w": 1.5, "x": 0, "y": 0 }, + { "label": "Q", "matrix": [0, 2], "w": 1, "x": 1.5, "y": 0 }, + { "label": "W", "matrix": [0, 3], "w": 1, "x": 2.5, "y": 0 }, + { "label": "E", "matrix": [0, 4], "w": 1, "x": 3.5, "y": 0 }, + { "label": "R", "matrix": [0, 5], "w": 1, "x": 4.5, "y": 0 }, + { "label": "T", "matrix": [0, 6], "w": 1, "x": 5.5, "y": 0 }, + { "label": "Y", "matrix": [0, 7], "w": 1, "x": 6.5, "y": 0 }, + { "label": "U", "matrix": [0, 8], "w": 1, "x": 7.5, "y": 0 }, + { "label": "I", "matrix": [0, 9], "w": 1, "x": 8.5, "y": 0 }, + { "label": "O", "matrix": [0, 10], "w": 1, "x": 9.5, "y": 0 }, + { "label": "P", "matrix": [0, 11], "w": 1, "x": 10.5, "y": 0 }, + { "label": "BACKSPACE", "matrix": [0, 12], "w": 1.5, "x": 11.5, "y": 0 }, + + { "label": "CAPSLOCK", "matrix": [1, 0], "w": 1.25, "x": 0, "y": 1 }, + { "label": "A", "matrix": [1, 1], "w": 1, "x": 1.25, "y": 1 }, + { "label": "S", "matrix": [1, 2], "w": 1, "x": 2.25, "y": 1 }, + { "label": "D", "matrix": [1, 3], "w": 1, "x": 3.25, "y": 1 }, + { "label": "F", "matrix": [1, 4], "w": 1, "x": 4.25, "y": 1 }, + { "label": "G", "matrix": [1, 5], "w": 1, "x": 5.75, "y": 1 }, + { "label": "H", "matrix": [1, 7], "w": 1, "x": 6.75, "y": 1 }, + { "label": "J", "matrix": [1, 8], "w": 1, "x": 7.75, "y": 1 }, + { "label": "K", "matrix": [1, 9], "w": 1, "x": 8.75, "y": 1 }, + { "label": "L", "matrix": [1, 10], "w": 1, "x": 9.75, "y": 1 }, + { "label": "SEMICOLON", "matrix": [1, 11], "w": 1, "x": 10.75, "y": 1 }, + { "label": "ENTER", "matrix": [1, 12], "w": 1.25, "x": 11.75, "y": 1 }, + + { "label": "LSHIFT", "matrix": [2, 0], "w": 1, "x": 0, "y": 2 }, + { "label": "Z", "matrix": [2, 1], "w": 1, "x": 1, "y": 2 }, + { "label": "X", "matrix": [2, 2], "w": 1, "x": 2, "y": 2 }, + { "label": "C", "matrix": [2, 3], "w": 1, "x": 3, "y": 2 }, + { "label": "V", "matrix": [2, 4], "w": 1, "x": 4, "y": 2 }, + { "label": "B", "matrix": [2, 5], "w": 1, "x": 5, "y": 2 }, + { "label": "ESCAPE", "matrix": [2, 6], "w": 1, "x": 6, "y": 2 }, + { "label": "N", "matrix": [2, 7], "w": 1, "x": 7, "y": 2 }, + { "label": "M", "matrix": [2, 8], "w": 1, "x": 8, "y": 2 }, + { "label": "COMMA", "matrix": [2, 9], "w": 1, "x": 9, "y": 2 }, + { "label": "PERIOD", "matrix": [2, 10], "w": 1, "x": 10, "y": 2 }, + { "label": "SLASH", "matrix": [2, 11], "w": 1, "x": 11, "y": 2 }, + { "label": "RSHIFT", "matrix": [2, 12], "w": 1, "x": 12, "y": 2 }, + + { "label": "LCTRL", "matrix": [3, 0], "w": 1.25, "x": 0, "y": 3 }, + { "label": "LWIN", "matrix": [3, 1], "w": 1.25, "x": 1.25, "y": 3 }, + { "label": "LALT", "matrix": [3, 3], "w": 1.25, "x": 2.5, "y": 3 }, + { "label": "SPACE1", "matrix": [3, 5], "w": 2.75, "x": 3.75, "y": 3 }, + { "label": "SPACE2", "matrix": [3, 7], "w": 2.75, "x": 6.5, "y": 3 }, + { "label": "RALT", "matrix": [3, 9], "w": 1.25, "x": 9.25, "y": 3 }, + { "label": "MENU", "matrix": [3, 11], "w": 1.25, "x": 10.5, "y": 3 }, + { "label": "RCTRL", "matrix": [3, 12], "w": 1.25, "x": 11.75, "y": 3 } + ] + } + } +} diff --git a/keyboards/handwired/wakizashi40/keymaps/default/keymap.c b/keyboards/handwired/wakizashi40/keymaps/default/keymap.c new file mode 100644 index 0000000000..910e5bde12 --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL), + + [1] = LAYOUT_all( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + MO(3), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; diff --git a/keyboards/handwired/wakizashi40/keymaps/via/keymap.c b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c new file mode 100644 index 0000000000..d456b8b40a --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/via/keymap.c @@ -0,0 +1,92 @@ +/* Copyright 2021 xiao (@xia0) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ESC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, LT(1, KC_SPC), LT(2, KC_SPC), KC_LALT, KC_MENU, KC_LCTL), + + [1] = LAYOUT_all( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F5, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + MO(11), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + MO(11), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_QUOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [4] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [5] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [6] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [7] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [8] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [9] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [10] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [11] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; diff --git a/keyboards/handwired/wakizashi40/keymaps/via/rules.mk b/keyboards/handwired/wakizashi40/keymaps/via/rules.mk new file mode 100644 index 0000000000..7a49719505 --- /dev/null +++ b/keyboards/handwired/wakizashi40/keymaps/via/rules.mk @@ -0,0 +1,4 @@ +# rules.mk overrides to enable VIA + +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/handwired/wakizashi40/readme.md b/keyboards/handwired/wakizashi40/readme.md new file mode 100644 index 0000000000..d94a75651c --- /dev/null +++ b/keyboards/handwired/wakizashi40/readme.md @@ -0,0 +1,19 @@ +# Wakizashi 40 + + + +Reverse stagger 40% keyboard based on the Katana 60. + +* Keyboard Maintainer: [fumbucker](https://github.com/xia0) +* Hardware Supported: Teensy2++ +* Hardware Availability: [thingiverse](https://www.thingiverse.com/thing:3467930) + +Make example for this keyboard (after setting up your build environment): + + make handwired/wakizashi40:default + +See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + +## Bootloader + +* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Capslock + R). diff --git a/keyboards/handwired/wakizashi40/rules.mk b/keyboards/handwired/wakizashi40/rules.mk new file mode 100644 index 0000000000..6e7633bfe0 --- /dev/null +++ b/keyboards/handwired/wakizashi40/rules.mk @@ -0,0 +1 @@ +# This file intentionally left blank diff --git a/keyboards/helix/pico/matrix.c b/keyboards/helix/pico/matrix.c index b18213d846..039cca6dcf 100644 --- a/keyboards/helix/pico/matrix.c +++ b/keyboards/helix/pico/matrix.c @@ -273,12 +273,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/helix/rev1/matrix.c b/keyboards/helix/rev1/matrix.c index aa2cc76905..f59391b596 100644 --- a/keyboards/helix/rev1/matrix.c +++ b/keyboards/helix/rev1/matrix.c @@ -239,12 +239,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/helix/rev2/matrix.c b/keyboards/helix/rev2/matrix.c index 8eed7e58b7..699c15358b 100644 --- a/keyboards/helix/rev2/matrix.c +++ b/keyboards/helix/rev2/matrix.c @@ -287,12 +287,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/hhkb/ansi/matrix.c b/keyboards/hhkb/ansi/matrix.c index 529ba8b8fc..5dde74cce9 100644 --- a/keyboards/hhkb/ansi/matrix.c +++ b/keyboards/hhkb/ansi/matrix.c @@ -163,15 +163,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix[i] != matrix_prev[i]) - return true; - } - return false; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/hhkb/jp/matrix.c b/keyboards/hhkb/jp/matrix.c index c0dca6a990..81db77fca7 100644 --- a/keyboards/hhkb/jp/matrix.c +++ b/keyboards/hhkb/jp/matrix.c @@ -164,15 +164,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - if (matrix[i] != matrix_prev[i]) - return true; - } - return false; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/hid_liber/matrix.c b/keyboards/hid_liber/matrix.c index ff59a17153..da73c616d7 100755 --- a/keyboards/hid_liber/matrix.c +++ b/keyboards/hid_liber/matrix.c @@ -218,12 +218,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - // NOTE: no longer used - return true; -} - inline bool matrix_has_ghost(void) { diff --git a/keyboards/honeycomb/config.h b/keyboards/honeycomb/config.h index 725f9490cb..c959543618 100755 --- a/keyboards/honeycomb/config.h +++ b/keyboards/honeycomb/config.h @@ -45,12 +45,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/honeycomb/honeycomb.c b/keyboards/honeycomb/honeycomb.c index 1254196d39..603400c7a3 100755 --- a/keyboards/honeycomb/honeycomb.c +++ b/keyboards/honeycomb/honeycomb.c @@ -7,7 +7,7 @@ void pointing_device_task(void){ uint32_t timeout = 0; //the m character requests the RF slave to send the mouse report - SERIAL_UART_DATA = 'm'; + uart_write('m'); //trust the external inputs completely, erase old data uint8_t uart_data[5] = {0}; @@ -17,7 +17,7 @@ void pointing_device_task(void){ //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while(!uart_available()){ timeout++; if (timeout > 10000){ xprintf("\r\nTIMED OUT"); @@ -25,7 +25,7 @@ void pointing_device_task(void){ } } xprintf("\r\nGOT DATA for %d",i); - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, bytes 1-4 are movement and scroll diff --git a/keyboards/honeycomb/matrix.c b/keyboards/honeycomb/matrix.c index 7fef6f0fd8..fe1e4ce8ff 100755 --- a/keyboards/honeycomb/matrix.c +++ b/keyboards/honeycomb/matrix.c @@ -30,7 +30,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "honeycomb.h" #include "pointing_device.h" #include "report.h" -#include "protocol/serial.h" +#include "uart.h" #if (MATRIX_COLS <= 8) # define print_matrix_header() print("\nr/c 01234567\n") @@ -95,7 +95,7 @@ uint8_t matrix_cols(void) { void matrix_init(void) { matrix_init_quantum(); - serial_init(); + uart_init(1000000); } uint8_t matrix_scan(void) @@ -103,7 +103,7 @@ uint8_t matrix_scan(void) uint32_t timeout = 0; // The 's' character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); // Trust the external keystates entirely, erase the last data uint8_t uart_data[4] = {0}; @@ -113,14 +113,14 @@ uint8_t matrix_scan(void) // Wait for the serial data, timeout if it's been too long // This only happened in testing with a loose wire, but does no // harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while(!uart_available()){ timeout++; if (timeout > 10000){ xprintf("\r\nTime out in keyboard."); break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } // Check for the end packet, it's our checksum. diff --git a/keyboards/honeycomb/rules.mk b/keyboards/honeycomb/rules.mk index 2b5eb0360c..a6029e3dbf 100755 --- a/keyboards/honeycomb/rules.mk +++ b/keyboards/honeycomb/rules.mk @@ -18,4 +18,5 @@ NKRO_ENABLE = yes # Enable N-Key Rollover # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality # # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/kinesis/alvicstep/matrix.c b/keyboards/kinesis/alvicstep/matrix.c index 71619f8167..9c05374510 100644 --- a/keyboards/kinesis/alvicstep/matrix.c +++ b/keyboards/kinesis/alvicstep/matrix.c @@ -136,12 +136,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/kprepublic/bm65hsrgb_iso/config.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h index 30b27dc26e..30b27dc26e 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/config.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/config.h diff --git a/keyboards/kprepublic/bm65hsrgb_iso/info.json b/keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json index 9212c43339..9212c43339 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/info.json +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/info.json diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/config.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/config.h index 1dc1414fa5..1dc1414fa5 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/config.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/config.h diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/keymap.c index 46de987a68..46de987a68 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/keymap.c diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/keymap.h index 1459e2c5bb..1459e2c5bb 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/keymap.h diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/readme.md index 095550b01a..095550b01a 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/readme.md +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/readme.md diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/rules.mk index c8354ea256..c8354ea256 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/rules.mk +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/deadolus/rules.mk diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/default/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/default/keymap.c index bed12e0f72..bed12e0f72 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/default/keymap.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/keymap.c index ae36e6b1f5..ae36e6b1f5 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/keymap.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/readme.md index 87c7542756..87c7542756 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/readme.md +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/readme.md diff --git a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/rules.mk index 036bd6d1c3..036bd6d1c3 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/rules.mk +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm65hsrgb_iso/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/rev1/readme.md index 752362e29a..752362e29a 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/readme.md +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/readme.md diff --git a/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rev1.c index 134c271824..f351fa68a8 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rev1.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "bm65hsrgb_iso.h" +#include "rev1.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { diff --git a/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.h b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rev1.h index 7f39c6f61b..7f39c6f61b 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rev1.h diff --git a/keyboards/kprepublic/bm65hsrgb_iso/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rules.mk index c3a6bf1d48..c3a6bf1d48 100644 --- a/keyboards/kprepublic/bm65hsrgb_iso/rules.mk +++ b/keyboards/kprepublic/bm65hsrgb_iso/rev1/rules.mk diff --git a/keyboards/kprepublic/bm68hsrgb/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/config.h index a779c97b7b..a779c97b7b 100644 --- a/keyboards/kprepublic/bm68hsrgb/config.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/config.h diff --git a/keyboards/kprepublic/bm68hsrgb/info.json b/keyboards/kprepublic/bm68hsrgb/rev1/info.json index 0a72da6e98..0a72da6e98 100644 --- a/keyboards/kprepublic/bm68hsrgb/info.json +++ b/keyboards/kprepublic/bm68hsrgb/rev1/info.json diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/default/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c index b4bc5cb59d..b4bc5cb59d 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/default/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/default/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/readme.md index 0408ee9e98..0408ee9e98 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/default/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/default/readme.md diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/config.h b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h index 0748f83cdc..0748f83cdc 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/config.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/config.h diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c index 934463b11f..934463b11f 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.c diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.h b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.h index e8d0170d4d..e8d0170d4d 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/keymap.h diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/readme.md index 47899c27e1..47899c27e1 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/peepeetee/readme.md diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/via/keymap.c b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c index 46381c561c..46381c561c 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/via/keymap.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm68hsrgb/keymaps/via/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/readme.md index c013ae25e2..c013ae25e2 100644 --- a/keyboards/kprepublic/bm68hsrgb/keymaps/via/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/readme.md diff --git a/keyboards/wings42/rev1/keymaps/via/rules.mk b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/wings42/rev1/keymaps/via/rules.mk +++ b/keyboards/kprepublic/bm68hsrgb/rev1/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm68hsrgb/readme.md b/keyboards/kprepublic/bm68hsrgb/rev1/readme.md index 54d71cab2c..54d71cab2c 100644 --- a/keyboards/kprepublic/bm68hsrgb/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/rev1/readme.md diff --git a/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.c b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.c index 734d2ee677..4634a662b6 100644 --- a/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.c +++ b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.c @@ -14,7 +14,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "bm68hsrgb.h" +#include "rev1.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { diff --git a/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.h b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.h index 3e18b914cc..3e18b914cc 100644 --- a/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.h +++ b/keyboards/kprepublic/bm68hsrgb/rev1/rev1.h diff --git a/keyboards/kprepublic/bm68hsrgb/rules.mk b/keyboards/kprepublic/bm68hsrgb/rev1/rules.mk index 92c37f393b..92c37f393b 100644 --- a/keyboards/kprepublic/bm68hsrgb/rules.mk +++ b/keyboards/kprepublic/bm68hsrgb/rev1/rules.mk diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk index 83d4fc590b..f0ff36fa35 100644 --- a/keyboards/massdrop/alt/rules.mk +++ b/keyboards/massdrop/alt/rules.mk @@ -5,6 +5,9 @@ SRC += config_led.c ARM_ATSAM = SAMD51J18A MCU = cortex-m4 +# Bootloader selection +BOOTLOADER = md-boot + # Build Options # change yes to no to disable # diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk index 667642f83d..a302c82d86 100644 --- a/keyboards/massdrop/ctrl/rules.mk +++ b/keyboards/massdrop/ctrl/rules.mk @@ -5,6 +5,9 @@ SRC += config_led.c ARM_ATSAM = SAMD51J18A MCU = cortex-m4 +# Bootloader selection +BOOTLOADER = md-boot + # Build Options # change yes to no to disable # diff --git a/keyboards/matrix/abelx/boards/abelx_bd/board.c b/keyboards/matrix/abelx/boards/abelx_bd/board.c index 68cf23cddc..db40a8e37b 100644 --- a/keyboards/matrix/abelx/boards/abelx_bd/board.c +++ b/keyboards/matrix/abelx/boards/abelx_bd/board.c @@ -208,9 +208,6 @@ static void stm32_gpio_init(void) { * else. */ void __early_init(void) { - extern void enter_bootloader_mode_if_requested(void); - enter_bootloader_mode_if_requested(); - stm32_gpio_init(); stm32_clock_init(); } diff --git a/keyboards/matrix/abelx/bootloader_defs.h b/keyboards/matrix/abelx/bootloader_defs.h deleted file mode 100644 index 20b8f73e6f..0000000000 --- a/keyboards/matrix/abelx/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/keyboards/matrix/abelx/rules.mk b/keyboards/matrix/abelx/rules.mk index 98b6cfa65e..ac00984eae 100644 --- a/keyboards/matrix/abelx/rules.mk +++ b/keyboards/matrix/abelx/rules.mk @@ -25,14 +25,6 @@ ARMV = 7 USE_FPU = yes -# Vector table for application -# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ -OPT_DEFS = - -# Options to pass to dfu-util when flashing -#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave -#DFU_SUFFIX_ARGS = -p DF11 -v 0483 - # Build Options # change yes to no to disable # diff --git a/keyboards/matrix/m20add/bootloader_defs.h b/keyboards/matrix/m20add/bootloader_defs.h deleted file mode 100644 index 4da3d39a32..0000000000 --- a/keyboards/matrix/m20add/bootloader_defs.h +++ /dev/null @@ -1,5 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/keyboards/matrix/m20add/m20add.c b/keyboards/matrix/m20add/m20add.c index 21f4f9b1ba..4d328d6c54 100644 --- a/keyboards/matrix/m20add/m20add.c +++ b/keyboards/matrix/m20add/m20add.c @@ -53,25 +53,6 @@ bool led_update_kb(led_t led_state) { return res; } -// override the default implementation to avoid re-initialization -void i2c_init(void) -{ - static bool initialized = false; - if (initialized) { - return; - } else { - initialized = true; - } - - // Try releasing special pins for a short time - palSetLineMode(I2C1_SCL_PIN, PAL_MODE_INPUT); - palSetLineMode(I2C1_SDA_PIN, PAL_MODE_INPUT); - - chThdSleepMilliseconds(10); - palSetLineMode(I2C1_SCL_PIN, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); - palSetLineMode(I2C1_SDA_PIN, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN); -} - #define REBOOT_MAGIC 0x41544B42 void shutdown_user(void) { diff --git a/keyboards/matrix/noah/bootloader_defs.h b/keyboards/matrix/noah/bootloader_defs.h deleted file mode 100644 index 4da3d39a32..0000000000 --- a/keyboards/matrix/noah/bootloader_defs.h +++ /dev/null @@ -1,5 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/keyboards/mechlovin/olly/jf/rules.mk b/keyboards/mechlovin/olly/jf/rules.mk index c0c9b2d7ea..2fafe64f12 100644 --- a/keyboards/mechlovin/olly/jf/rules.mk +++ b/keyboards/mechlovin/olly/jf/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a F_CPU = 16000000 # Bootloader selection -BOOTLOADER = USBasp +BOOTLOADER = usbasploader # Build Options # change yes to no to disable @@ -21,4 +21,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite -SRC += matrix.c
\ No newline at end of file +SRC += matrix.c diff --git a/keyboards/mechmini/v1/rules.mk b/keyboards/mechmini/v1/rules.mk index 6905e73c27..a7d4a67a16 100644 --- a/keyboards/mechmini/v1/rules.mk +++ b/keyboards/mechmini/v1/rules.mk @@ -2,7 +2,7 @@ MCU = atmega32a # Bootloader selection -BOOTLOADER = atmel-dfu +BOOTLOADER = bootloadhid # Build Options # change yes to no to disable diff --git a/keyboards/meira/matrix.c b/keyboards/meira/matrix.c index ae1ae5ce9d..8e8e9485b4 100644 --- a/keyboards/meira/matrix.c +++ b/keyboards/meira/matrix.c @@ -161,12 +161,6 @@ uint8_t matrix_scan(void) return ret; } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/mitosis/config.h b/keyboards/mitosis/config.h index 94e84e680e..2c72eed5f2 100644 --- a/keyboards/mitosis/config.h +++ b/keyboards/mitosis/config.h @@ -56,12 +56,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/mitosis/matrix.c b/keyboards/mitosis/matrix.c index 71c372a3ce..a92c3e8431 100644 --- a/keyboards/mitosis/matrix.c +++ b/keyboards/mitosis/matrix.c @@ -15,80 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -98,58 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 5; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk index 6c7aa30d88..0a8a31e7dd 100644 --- a/keyboards/mitosis/rules.mk +++ b/keyboards/mitosis/rules.mk @@ -8,14 +8,17 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = yes # Unicode +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes +CUSTOM_MATRIX = lite -# # project specific files -SRC += matrix.c serial_uart.c +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/mode/m65s/rules.mk b/keyboards/mode/m65s/rules.mk index ed43a7bc77..bb3ebaee28 100644 --- a/keyboards/mode/m65s/rules.mk +++ b/keyboards/mode/m65s/rules.mk @@ -1,6 +1,9 @@ # MCU name MCU = STM32F401 +# Bootloader selection +BOOTLOADER = stm32-dfu + # Build Options # change yes to no to disable # @@ -14,6 +17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output EEPROM_DRIVER = i2c + # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE -DDEBUG_EEPROM_OUTPUT=TRUE -STM32_BOOTLOADER_ADDRESS = 0x1FFF0000 diff --git a/keyboards/nek_type_a/matrix.c b/keyboards/nek_type_a/matrix.c index a59598a503..b396be9911 100644 --- a/keyboards/nek_type_a/matrix.c +++ b/keyboards/nek_type_a/matrix.c @@ -205,14 +205,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/planck/keymaps/thermal_printer/config.h b/keyboards/planck/keymaps/thermal_printer/config.h index 4ae9ced258..dd9d6a9d25 100644 --- a/keyboards/planck/keymaps/thermal_printer/config.h +++ b/keyboards/planck/keymaps/thermal_printer/config.h @@ -1,9 +1,4 @@ -#ifndef CONFIG_USER_H -#define CONFIG_USER_H - -#include "../../config.h" - -#define SERIAL_UART_BAUD 19200 +#pragma once /* * MIDI options @@ -21,8 +16,3 @@ - etc. */ //#define MIDI_ADVANCED - -/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ -//#define MIDI_TONE_KEYCODE_OCTAVES 2 - - #endif
\ No newline at end of file diff --git a/keyboards/ploopyco/mouse/readme.md b/keyboards/ploopyco/mouse/readme.md index f7f072928b..af3cb3520f 100644 --- a/keyboards/ploopyco/mouse/readme.md +++ b/keyboards/ploopyco/mouse/readme.md @@ -39,7 +39,7 @@ This should allow you to more heavily customize the behavior. Alternatively, the `process_wheel` and `process_mouse` functions can both be replaced too, to allow for even more functionality. -Additionally, you can change the DPI/CPI or speed of the krackball by calling `pmw_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 1200, 1600, and 2400, but can be changed. 1600 is also set to the default. +Additionally, you can change the DPI/CPI or speed of the trackball by calling `pointing_device_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 1200, 1600, and 2400, but can be changed. 1600 is also set to the default. To configure/set your own array, there are two defines to use, `PLOOPY_DPI_OPTIONS` to set the array, and `PLOOPY_DPI_DEFAULT`. diff --git a/keyboards/ploopyco/trackball/readme.md b/keyboards/ploopyco/trackball/readme.md index e1885d149a..1648bd20f9 100644 --- a/keyboards/ploopyco/trackball/readme.md +++ b/keyboards/ploopyco/trackball/readme.md @@ -19,7 +19,7 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Revisions -There are two main revisions for the PloopyCo Tracball, everything up to 1.004, and 1.005-1.006. +There are two main revisions for the PloopyCo Trackball, everything up to 1.004, and 1.005-1.006. In the 1.005 revision, button for was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5. @@ -47,7 +47,7 @@ This should allow you to more heavily customize the behavior. Alternatively, the `process_wheel` and `process_mouse` functions can both be replaced too, to allow for even more functionality. -Additionally, you can change the DPI/CPI or speed of the trackball by calling `pmw_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 1200, 1600, and 2400, but can be changed. 1600 is also set to the default. +Additionally, you can change the DPI/CPI or speed of the trackball by calling `pointing_device_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 1200, 1600, and 2400, but can be changed. 1600 is also set to the default. To configure/set your own array, there are two defines to use, `PLOOPY_DPI_OPTIONS` to set the array, and `PLOOPY_DPI_DEFAULT`. diff --git a/keyboards/ploopyco/trackball/trackball.c b/keyboards/ploopyco/trackball/trackball.c index 25b36574a5..f819958734 100644 --- a/keyboards/ploopyco/trackball/trackball.c +++ b/keyboards/ploopyco/trackball/trackball.c @@ -218,7 +218,7 @@ void keyboard_pre_init_kb(void) { } void pointing_device_init_kb(void) { - pmw3360_set_cpi(dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); // initialize the scroll wheel's optical encoder opt_encoder_init(); } diff --git a/keyboards/redox_w/config.h b/keyboards/redox_w/config.h index b480b072f9..c4aeb32d58 100644 --- a/keyboards/redox_w/config.h +++ b/keyboards/redox_w/config.h @@ -55,12 +55,3 @@ //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/redox_w/matrix.c b/keyboards/redox_w/matrix.c index 703987a939..fd25231d9e 100644 --- a/keyboards/redox_w/matrix.c +++ b/keyboards/redox_w/matrix.c @@ -13,89 +13,21 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - -__attribute__ ((weak)) -void matrix_init_quantum(void) { - matrix_init_kb(); -} - -__attribute__ ((weak)) -void matrix_scan_quantum(void) { - matrix_scan_kb(); -} - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} - -void matrix_init(void) { +#include "quantum.h" +#include "matrix.h" +#include "uart.h" - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[11] = {0}; @@ -105,58 +37,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 7; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 7; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - - matrix_scan_quantum(); - return 1; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/redox_w/rules.mk b/keyboards/redox_w/rules.mk index a8bd3a027a..8cb1736147 100644 --- a/keyboards/redox_w/rules.mk +++ b/keyboards/redox_w/rules.mk @@ -8,13 +8,16 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Enable N-Key Rollover -# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite -# # project specific files -SRC += matrix.c serial_uart.c +# project specific files +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/redscarf_iiplus/verb/matrix.c b/keyboards/redscarf_iiplus/verb/matrix.c index 42cfb7c037..88ecb586b3 100755 --- a/keyboards/redscarf_iiplus/verb/matrix.c +++ b/keyboards/redscarf_iiplus/verb/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/redscarf_iiplus/verc/matrix.c b/keyboards/redscarf_iiplus/verc/matrix.c index 42cfb7c037..88ecb586b3 100755 --- a/keyboards/redscarf_iiplus/verc/matrix.c +++ b/keyboards/redscarf_iiplus/verc/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/redscarf_iiplus/verd/matrix.c b/keyboards/redscarf_iiplus/verd/matrix.c index 78d1191b68..d9dbb3c0a3 100644 --- a/keyboards/redscarf_iiplus/verd/matrix.c +++ b/keyboards/redscarf_iiplus/verd/matrix.c @@ -94,13 +94,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/rocketboard_16/rules.mk b/keyboards/rocketboard_16/rules.mk index d27da2c226..c07ebff427 100644 --- a/keyboards/rocketboard_16/rules.mk +++ b/keyboards/rocketboard_16/rules.mk @@ -8,7 +8,7 @@ MCU = STM32F103 MCU_LDSCRIPT = STM32F103xB_stm32duino_bootloader OPT_DEFS += -DBOOTLOADER_STM32DUINO BOARD = STM32_F103_STM32DUINO -STM32_BOOTLOADER_ADDRESS = 0x80000000 +BOOTLOADER_TYPE = stm32duino DFU_ARGS = -d 1EAF:0003 -a 2 -R DFU_SUFFIX_ARGS = -v 1EAF -p 0003 diff --git a/keyboards/sekigon/grs_70ec/matrix.c b/keyboards/sekigon/grs_70ec/matrix.c index 98b2347937..926ed6f813 100644 --- a/keyboards/sekigon/grs_70ec/matrix.c +++ b/keyboards/sekigon/grs_70ec/matrix.c @@ -70,50 +70,3 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) { return updated; } - -bool matrix_post_scan(void) { - bool changed = false; - if (is_keyboard_master()) { - static uint8_t error_count; - - matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; - if (!transport_master(matrix + thatHand, slave_matrix)) { - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - dprintf("Error: disconnect split half\n"); - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[thatHand + i] = 0; - slave_matrix[i] = 0; - } - - changed = true; - } - } else { - error_count = 0; - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - if (matrix[thatHand + i] != slave_matrix[i]) { - matrix[thatHand + i] = slave_matrix[i]; - changed = true; - } - } - } - - matrix_scan_quantum(); - } else { - transport_slave(matrix + thatHand, matrix + thisHand); - - matrix_slave_scan_user(); - } - return changed; -} - -uint8_t matrix_scan(void) { - bool changed = matrix_scan_custom(raw_matrix) || matrix_post_scan(); - - debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); - - return changed; -} diff --git a/keyboards/sirius/uni660/rev1/config.h b/keyboards/sirius/uni660/rev1/config.h index 91d7c5d7a3..f9815844cb 100644 --- a/keyboards/sirius/uni660/rev1/config.h +++ b/keyboards/sirius/uni660/rev1/config.h @@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); - #define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev1/matrix.c b/keyboards/sirius/uni660/rev1/matrix.c index 2db6767a46..919db5c80d 100644 --- a/keyboards/sirius/uni660/rev1/matrix.c +++ b/keyboards/sirius/uni660/rev1/matrix.c @@ -15,83 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "debounce.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} +#include "quantum.h" +#include "matrix.h" +#include "uart.h" -void matrix_init(void) { - debounce_init(MATRIX_ROWS); - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ - bool matrix_has_changed = false; - +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[17] = {0}; @@ -101,60 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 8; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 8; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - debounce(matrix, matrix, MATRIX_ROWS, matrix_has_changed); - - matrix_scan_quantum(); - - return matrix_has_changed; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/sirius/uni660/rev1/rules.mk b/keyboards/sirius/uni660/rev1/rules.mk index 836bf6b442..71cc3efd92 100644 --- a/keyboards/sirius/uni660/rev1/rules.mk +++ b/keyboards/sirius/uni660/rev1/rules.mk @@ -17,7 +17,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode -CUSTOM_MATRIX = yes +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c diff --git a/keyboards/sirius/uni660/rev2/ansi/config.h b/keyboards/sirius/uni660/rev2/ansi/config.h index 13e33ebf11..8777dc4011 100644 --- a/keyboards/sirius/uni660/rev2/ansi/config.h +++ b/keyboards/sirius/uni660/rev2/ansi/config.h @@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); - #define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev2/iso/config.h b/keyboards/sirius/uni660/rev2/iso/config.h index 3283f0cd67..763230dca8 100644 --- a/keyboards/sirius/uni660/rev2/iso/config.h +++ b/keyboards/sirius/uni660/rev2/iso/config.h @@ -57,13 +57,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -//UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); - #define DYNAMIC_KEYMAP_LAYER_COUNT 4 diff --git a/keyboards/sirius/uni660/rev2/matrix.c b/keyboards/sirius/uni660/rev2/matrix.c index 2db6767a46..919db5c80d 100644 --- a/keyboards/sirius/uni660/rev2/matrix.c +++ b/keyboards/sirius/uni660/rev2/matrix.c @@ -15,83 +15,21 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include <stdint.h> -#include <stdbool.h> -#if defined(__AVR__) -#include <avr/io.h> -#endif -#include "wait.h" -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "timer.h" -#include "debounce.h" -#include "protocol/serial.h" - -#if (MATRIX_COLS <= 8) -# define print_matrix_header() print("\nr/c 01234567\n") -# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop(matrix[i]) -# define ROW_SHIFTER ((uint8_t)1) -#elif (MATRIX_COLS <= 16) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop16(matrix[i]) -# define ROW_SHIFTER ((uint16_t)1) -#elif (MATRIX_COLS <= 32) -# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") -# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) -# define matrix_bitpop(i) bitpop32(matrix[i]) -# define ROW_SHIFTER ((uint32_t)1) -#endif - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) { - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) { - return MATRIX_COLS; -} +#include "quantum.h" +#include "matrix.h" +#include "uart.h" -void matrix_init(void) { - debounce_init(MATRIX_ROWS); - matrix_init_quantum(); - serial_init(); +void matrix_init_custom(void) { + uart_init(1000000); } -uint8_t matrix_scan(void) -{ - bool matrix_has_changed = false; - +bool matrix_scan_custom(matrix_row_t current_matrix[]) { uint32_t timeout = 0; + bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[17] = {0}; @@ -101,60 +39,27 @@ uint8_t matrix_scan(void) //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while(!SERIAL_UART_RXD_PRESENT){ + while (!uart_available()) { timeout++; - if (timeout > 10000){ + if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 //will only show up here if the correct bytes were recieved - if (uart_data[10] == 0xE0) - { + if (uart_data[10] == 0xE0) { //shifting and transferring the keystates to the QMK matrix variable for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 8; + matrix_row_t current_row = (uint16_t) uart_data[i * 2] | (uint16_t) uart_data[i * 2 + 1] << 8; + if (current_matrix[i] != current_row) { + changed = true; + } + current_matrix[i] = current_row; } } - debounce(matrix, matrix, MATRIX_ROWS, matrix_has_changed); - - matrix_scan_quantum(); - - return matrix_has_changed; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print_matrix_header(); - - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - print_hex8(row); print(": "); - print_matrix_row(row); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += matrix_bitpop(i); - } - return count; + return changed; } diff --git a/keyboards/sirius/uni660/rev2/rules.mk b/keyboards/sirius/uni660/rev2/rules.mk index 0abebb07c6..850c2a2e35 100644 --- a/keyboards/sirius/uni660/rev2/rules.mk +++ b/keyboards/sirius/uni660/rev2/rules.mk @@ -17,9 +17,10 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode -CUSTOM_MATRIX = yes +CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c DEFAULT_FOLDER = sirius/uni660/rev2/ansi diff --git a/keyboards/sirius/unigo66/custom_matrix.cpp b/keyboards/sirius/unigo66/custom_matrix.cpp index fba107c7cb..dfcf82c779 100644 --- a/keyboards/sirius/unigo66/custom_matrix.cpp +++ b/keyboards/sirius/unigo66/custom_matrix.cpp @@ -172,10 +172,6 @@ extern "C" return 1; } - bool matrix_is_modified(void) { - return matrix_is_mod; - } - bool matrix_is_on(uint8_t row, uint8_t col) { uint8_t code = CODE(row, col); diff --git a/keyboards/sixkeyboard/matrix.c b/keyboards/sixkeyboard/matrix.c index 64b46e9b0c..a6b28f3a12 100644 --- a/keyboards/sixkeyboard/matrix.c +++ b/keyboards/sixkeyboard/matrix.c @@ -114,11 +114,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/sx60/matrix.c b/keyboards/sx60/matrix.c index b7dc25425d..231e1c8836 100644 --- a/keyboards/sx60/matrix.c +++ b/keyboards/sx60/matrix.c @@ -172,14 +172,6 @@ uint8_t matrix_scan(void) return 1; } -bool matrix_is_modified(void) -{ -#if (DEBOUNCE > 0) - if (debouncing) return false; -#endif - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/telophase/config.h b/keyboards/telophase/config.h index 51718da9d4..837bb8ab9b 100644 --- a/keyboards/telophase/config.h +++ b/keyboards/telophase/config.h @@ -72,12 +72,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION - -// UART settings for communication with the RF microcontroller -#define SERIAL_UART_BAUD 1000000 -#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) -#define SERIAL_UART_INIT_CUSTOM \ - /* enable TX and RX */ \ - UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ - /* 8-bit data */ \ - UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c index a153dd4bf1..44b7e4c9e9 100644 --- a/keyboards/telophase/matrix.c +++ b/keyboards/telophase/matrix.c @@ -18,10 +18,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "quantum.h" #include "matrix.h" -#include "protocol/serial.h" +#include "uart.h" void matrix_init_custom(void) { - serial_init(); + uart_init(1000000); } bool matrix_scan_custom(matrix_row_t current_matrix[]) { @@ -29,7 +29,7 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) { bool changed = false; //the s character requests the RF slave to send the matrix - SERIAL_UART_DATA = 's'; + uart_write('s'); //trust the external keystates entirely, erase the last data uint8_t uart_data[13] = {0}; @@ -39,13 +39,13 @@ bool matrix_scan_custom(matrix_row_t current_matrix[]) { //wait for the serial data, timeout if it's been too long //this only happened in testing with a loose wire, but does no //harm to leave it in here - while (!SERIAL_UART_RXD_PRESENT) { + while (!uart_available()) { timeout++; if (timeout > 10000) { break; } } - uart_data[i] = SERIAL_UART_DATA; + uart_data[i] = uart_read(); } //check for the end packet, the key state bytes use the LSBs, so 0xE0 diff --git a/keyboards/telophase/rules.mk b/keyboards/telophase/rules.mk index c3a8aaf79f..41a6ee25f5 100644 --- a/keyboards/telophase/rules.mk +++ b/keyboards/telophase/rules.mk @@ -19,7 +19,8 @@ AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite # project specific files -SRC += matrix.c serial_uart.c +SRC += matrix.c +QUANTUM_LIB_SRC += uart.c # Disable unsupported hardware RGBLIGHT_SUPPORTED = no diff --git a/keyboards/tgr/jane/v2ce/rules.mk b/keyboards/tgr/jane/v2ce/rules.mk index 0a865321a6..8fcc8d911f 100644 --- a/keyboards/tgr/jane/v2ce/rules.mk +++ b/keyboards/tgr/jane/v2ce/rules.mk @@ -2,7 +2,7 @@ MCU = atmega32a # Bootloader selection -BOOTLOADER = bootloadHID +BOOTLOADER = bootloadhid # Build Options # change yes to no to disable diff --git a/keyboards/thedogkeyboard/matrix.c b/keyboards/thedogkeyboard/matrix.c index 474fbec030..2851859cf2 100644 --- a/keyboards/thedogkeyboard/matrix.c +++ b/keyboards/thedogkeyboard/matrix.c @@ -90,13 +90,6 @@ uint8_t matrix_cols(void) { return MATRIX_COLS; } -//Deprecated. -bool matrix_is_modified(void) -{ - if (debounce_active()) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/keyboards/yanghu/unicorne/config.h b/keyboards/yanghu/unicorne/config.h index 652afeb3b4..27d21c7906 100644 --- a/keyboards/yanghu/unicorne/config.h +++ b/keyboards/yanghu/unicorne/config.h @@ -42,6 +42,12 @@ #define ENCODERS_PAD_B \ { B12, B0 } +/* I2C - required for custom i2c_init */ +#define I2C1_SCL_PIN B6 +#define I2C1_SDA_PIN B7 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 + /* Audio */ #define AUDIO_PIN A8 #define AUDIO_PWM_PAL_MODE 1 diff --git a/keyboards/chili/chili.c b/keyboards/ydkb/chili/chili.c index f629a6d60a..f629a6d60a 100644 --- a/keyboards/chili/chili.c +++ b/keyboards/ydkb/chili/chili.c diff --git a/keyboards/chili/chili.h b/keyboards/ydkb/chili/chili.h index f5e1444b94..f5e1444b94 100644 --- a/keyboards/chili/chili.h +++ b/keyboards/ydkb/chili/chili.h diff --git a/keyboards/chili/config.h b/keyboards/ydkb/chili/config.h index 13bd700363..13bd700363 100644 --- a/keyboards/chili/config.h +++ b/keyboards/ydkb/chili/config.h diff --git a/keyboards/chili/info.json b/keyboards/ydkb/chili/info.json index 8e92d83de0..8e92d83de0 100644 --- a/keyboards/chili/info.json +++ b/keyboards/ydkb/chili/info.json diff --git a/keyboards/chili/keymaps/default/keymap.c b/keyboards/ydkb/chili/keymaps/default/keymap.c index 32ac9a066d..32ac9a066d 100644 --- a/keyboards/chili/keymaps/default/keymap.c +++ b/keyboards/ydkb/chili/keymaps/default/keymap.c diff --git a/keyboards/chili/keymaps/via/keymap.c b/keyboards/ydkb/chili/keymaps/via/keymap.c index 9d5cdd303f..9d5cdd303f 100644 --- a/keyboards/chili/keymaps/via/keymap.c +++ b/keyboards/ydkb/chili/keymaps/via/keymap.c diff --git a/keyboards/wings42/rev1_extkeys/keymaps/via/rules.mk b/keyboards/ydkb/chili/keymaps/via/rules.mk index 1e5b99807c..1e5b99807c 100644 --- a/keyboards/wings42/rev1_extkeys/keymaps/via/rules.mk +++ b/keyboards/ydkb/chili/keymaps/via/rules.mk diff --git a/keyboards/chili/readme.md b/keyboards/ydkb/chili/readme.md index a383f98fb0..c7be92b9e5 100644 --- a/keyboards/chili/readme.md +++ b/keyboards/ydkb/chili/readme.md @@ -10,6 +10,6 @@ The YDKB Chili is a Cherry G80-3000 replacement PCB utilizing the ATmega32U4 mic Make example for this keyboard (after setting up your build environment): - make chili:default + make ydkb/chili:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/chili/rules.mk b/keyboards/ydkb/chili/rules.mk index 31559786a6..31559786a6 100644 --- a/keyboards/chili/rules.mk +++ b/keyboards/ydkb/chili/rules.mk diff --git a/keyboards/just60/config.h b/keyboards/ydkb/just60/config.h index b2ff156310..b2ff156310 100644 --- a/keyboards/just60/config.h +++ b/keyboards/ydkb/just60/config.h diff --git a/keyboards/just60/info.json b/keyboards/ydkb/just60/info.json index 5f42033845..5f42033845 100644 --- a/keyboards/just60/info.json +++ b/keyboards/ydkb/just60/info.json diff --git a/keyboards/just60/just60.h b/keyboards/ydkb/just60/just60.h index 426324fe02..426324fe02 100644 --- a/keyboards/just60/just60.h +++ b/keyboards/ydkb/just60/just60.h diff --git a/keyboards/just60/keymaps/default/keymap.c b/keyboards/ydkb/just60/keymaps/default/keymap.c index da034e0e44..da034e0e44 100644 --- a/keyboards/just60/keymaps/default/keymap.c +++ b/keyboards/ydkb/just60/keymaps/default/keymap.c diff --git a/keyboards/just60/keymaps/default/readme.md b/keyboards/ydkb/just60/keymaps/default/readme.md index 927618c910..927618c910 100644 --- a/keyboards/just60/keymaps/default/readme.md +++ b/keyboards/ydkb/just60/keymaps/default/readme.md diff --git a/keyboards/just60/keymaps/thinxer/keymap.c b/keyboards/ydkb/just60/keymaps/thinxer/keymap.c index da034e0e44..da034e0e44 100644 --- a/keyboards/just60/keymaps/thinxer/keymap.c +++ b/keyboards/ydkb/just60/keymaps/thinxer/keymap.c diff --git a/keyboards/just60/keymaps/thinxer/readme.md b/keyboards/ydkb/just60/keymaps/thinxer/readme.md index 9cd12c192f..9cd12c192f 100644 --- a/keyboards/just60/keymaps/thinxer/readme.md +++ b/keyboards/ydkb/just60/keymaps/thinxer/readme.md diff --git a/keyboards/just60/keymaps/thinxer/rules.mk b/keyboards/ydkb/just60/keymaps/thinxer/rules.mk index 0613ea8667..0613ea8667 100644 --- a/keyboards/just60/keymaps/thinxer/rules.mk +++ b/keyboards/ydkb/just60/keymaps/thinxer/rules.mk diff --git a/keyboards/just60/readme.md b/keyboards/ydkb/just60/readme.md index f78adcd529..1fe05bd3ea 100644 --- a/keyboards/just60/readme.md +++ b/keyboards/ydkb/just60/readme.md @@ -12,6 +12,6 @@ Backlight LEDs and Bluetooth are not working yet. Make example for this keyboard (after setting up your build environment): - make just60:default + make ydkb/just60:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/just60/rules.mk b/keyboards/ydkb/just60/rules.mk index 7323e8f1e2..7323e8f1e2 100644 --- a/keyboards/just60/rules.mk +++ b/keyboards/ydkb/just60/rules.mk diff --git a/keyboards/yd68/config.h b/keyboards/ydkb/yd68/config.h index a501a98476..a501a98476 100644 --- a/keyboards/yd68/config.h +++ b/keyboards/ydkb/yd68/config.h diff --git a/keyboards/yd68/info.json b/keyboards/ydkb/yd68/info.json index 8797620557..8797620557 100644 --- a/keyboards/yd68/info.json +++ b/keyboards/ydkb/yd68/info.json diff --git a/keyboards/yd68/keymaps/default/keymap.c b/keyboards/ydkb/yd68/keymaps/default/keymap.c index c8b49c76a3..c8b49c76a3 100644 --- a/keyboards/yd68/keymaps/default/keymap.c +++ b/keyboards/ydkb/yd68/keymaps/default/keymap.c diff --git a/keyboards/yd68/keymaps/default/readme.md b/keyboards/ydkb/yd68/keymaps/default/readme.md index 877e64f18b..877e64f18b 100644 --- a/keyboards/yd68/keymaps/default/readme.md +++ b/keyboards/ydkb/yd68/keymaps/default/readme.md diff --git a/keyboards/yd68/readme.md b/keyboards/ydkb/yd68/readme.md index 7e5e83bcc9..2632e8e9f8 100644 --- a/keyboards/yd68/readme.md +++ b/keyboards/ydkb/yd68/readme.md @@ -10,6 +10,6 @@ Hardware Availability: [KBDFans](https://kbdfans.cn/collections/diy-kit/products Make example for this keyboard (after setting up your build environment): - make yd68:default + make ydkb/yd68:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/yd68/rules.mk b/keyboards/ydkb/yd68/rules.mk index 561e8f4ca1..561e8f4ca1 100644 --- a/keyboards/yd68/rules.mk +++ b/keyboards/ydkb/yd68/rules.mk diff --git a/keyboards/yd68/yd68.c b/keyboards/ydkb/yd68/yd68.c index 22f75f7f81..22f75f7f81 100644 --- a/keyboards/yd68/yd68.c +++ b/keyboards/ydkb/yd68/yd68.c diff --git a/keyboards/yd68/yd68.h b/keyboards/ydkb/yd68/yd68.h index 3303bd899e..3303bd899e 100644 --- a/keyboards/yd68/yd68.h +++ b/keyboards/ydkb/yd68/yd68.h diff --git a/keyboards/yosino58/rev1/matrix.c b/keyboards/yosino58/rev1/matrix.c index 3db40b3829..e2be7113bf 100644 --- a/keyboards/yosino58/rev1/matrix.c +++ b/keyboards/yosino58/rev1/matrix.c @@ -289,12 +289,6 @@ void matrix_slave_scan(void) { #endif } -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - inline bool matrix_is_on(uint8_t row, uint8_t col) { diff --git a/lib/python/qmk/cli/generate/develop_pr_list.py b/lib/python/qmk/cli/generate/develop_pr_list.py index 07e46752a6..fab0262773 100755 --- a/lib/python/qmk/cli/generate/develop_pr_list.py +++ b/lib/python/qmk/cli/generate/develop_pr_list.py @@ -97,7 +97,7 @@ def generate_develop_pr_list(cli): match = git_expr.search(line) if match: pr_info = _get_pr_info(cache, gh, match.group("pr")) - commit_info = {'hash': match.group("hash"), 'title': match.group("title"), 'pr_num': int(match.group("pr")), 'pr_labels': [label.name for label in pr_info.labels.items]} + commit_info = {'hash': match.group("hash"), 'title': pr_info['title'], 'pr_num': int(match.group("pr")), 'pr_labels': [label.name for label in pr_info.labels.items]} _categorise_commit(commit_info) def _dump_commit_list(name, collection): diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 9a07fc842f..6bdf2cb166 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -622,12 +622,7 @@ def arm_processor_rules(info_data, rules): info_data['protocol'] = 'ChibiOS' if 'bootloader' not in info_data: - if 'STM32' in info_data['processor']: - info_data['bootloader'] = 'stm32-dfu' - elif 'WB32' in info_data['processor']: - info_data['bootloader'] = 'wb32-dfu' - else: - info_data['bootloader'] = 'unknown' + info_data['bootloader'] = 'unknown' if 'STM32' in info_data['processor']: info_data['platform'] = 'STM32' diff --git a/platforms/arm_atsam/bootloader.c b/platforms/arm_atsam/bootloaders/md_boot.c index 9015b00aab..e7508ffe51 100644 --- a/platforms/arm_atsam/bootloader.c +++ b/platforms/arm_atsam/bootloaders/md_boot.c @@ -15,13 +15,18 @@ */ #include "bootloader.h" + #include "samd51j18a.h" -#include "md_bootloader.h" -// Set watchdog timer to reset. Directs the bootloader to stay in programming mode. -void bootloader_jump(void) { #ifdef KEYBOARD_massdrop_ctrl - // CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method. +// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support +extern uint32_t _eram; + +# define BOOTLOADER_MAGIC 0x3B9ACA00 +# define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4) + +// CTRL keyboards released with bootloader version below must use RAM method. Otherwise use WDT method. +void bootloader_jump(void) { uint8_t ver_ram_method[] = "v2.18Jun 22 2018 17:28:08"; // The version to match (NULL terminated by compiler) uint8_t *ver_check = ver_ram_method; // Pointer to version match string for traversal uint8_t *ver_rom = (uint8_t *)0x21A0; // Pointer to address in ROM where this specific bootloader version would exist @@ -34,24 +39,34 @@ void bootloader_jump(void) { if (!*ver_check) { // If check version pointer is NULL, all characters have matched *MAGIC_ADDR = BOOTLOADER_MAGIC; // Set magic number into RAM NVIC_SystemReset(); // Perform system reset - while (1) { - } // Won't get here + + while (1) + ; // Won't get here } -#endif +} +#else + +// Set watchdog timer to reset. Directs the bootloader to stay in programming mode. +void bootloader_jump(void) { WDT->CTRLA.bit.ENABLE = 0; - while (WDT->SYNCBUSY.bit.ENABLE) { - } - while (WDT->CTRLA.bit.ENABLE) { - } + + while (WDT->SYNCBUSY.bit.ENABLE) + ; + while (WDT->CTRLA.bit.ENABLE) + ; + WDT->CONFIG.bit.WINDOW = 0; WDT->CONFIG.bit.PER = 0; WDT->EWCTRL.bit.EWOFFSET = 0; WDT->CTRLA.bit.ENABLE = 1; - while (WDT->SYNCBUSY.bit.ENABLE) { - } - while (!WDT->CTRLA.bit.ENABLE) { - } - while (1) { - } // Wait on timeout + + while (WDT->SYNCBUSY.bit.ENABLE) + ; + while (!WDT->CTRLA.bit.ENABLE) + ; + + while (1) + ; // Wait on timeout } +#endif diff --git a/platforms/arm_atsam/gpio.h b/platforms/arm_atsam/gpio.h index 915ed0ef4f..a42aaff54d 100644 --- a/platforms/arm_atsam/gpio.h +++ b/platforms/arm_atsam/gpio.h @@ -22,9 +22,9 @@ typedef uint8_t pin_t; -#define SAMD_PORT(pin) ((pin & 0x20) >> 5) -#define SAMD_PIN(pin) (pin & 0x1f) -#define SAMD_PIN_MASK(pin) (1 << (pin & 0x1f)) +#define SAMD_PORT(pin) (((pin)&0x20) >> 5) +#define SAMD_PIN(pin) ((pin)&0x1f) +#define SAMD_PIN_MASK(pin) (1 << ((pin)&0x1f)) #define setPinInput(pin) \ do { \ @@ -48,12 +48,16 @@ typedef uint8_t pin_t; PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.PULLEN = 1; \ } while (0) -#define setPinOutput(pin) \ +#define setPinOutputPushPull(pin) \ do { \ PORT->Group[SAMD_PORT(pin)].DIRSET.reg = SAMD_PIN_MASK(pin); \ PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \ } while (0) +#define setPinOutputOpenDrain(pin) _Static_assert(0, "arm_atsam platform does not implement an open-drain output") + +#define setPinOutput(pin) setPinOutputPushPull(pin) + #define writePinHigh(pin) \ do { \ PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \ diff --git a/platforms/avr/bootloader.c b/platforms/avr/bootloader.c deleted file mode 100644 index c0272903b8..0000000000 --- a/platforms/avr/bootloader.c +++ /dev/null @@ -1,293 +0,0 @@ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/eeprom.h> -#include <avr/interrupt.h> -#include <avr/wdt.h> -#include <util/delay.h> -#include "bootloader.h" -#include <avr/boot.h> - -#ifdef PROTOCOL_LUFA -# include <LUFA/Drivers/USB/USB.h> -#endif - -/** \brief Bootloader Size in *bytes* - * - * AVR Boot section size are defined by setting BOOTSZ fuse in fact. Consult with your MCU datasheet. - * Note that 'Word'(2 bytes) size and address are used in datasheet while TMK uses 'Byte'. - * - * Size of Bootloaders in bytes: - * Atmel DFU loader(ATmega32U4) 4096 - * Atmel DFU loader(AT90USB128) 8192 - * LUFA bootloader(ATmega32U4) 4096 - * Arduino Caterina(ATmega32U4) 4096 - * USBaspLoader(ATmega***) 2048 - * Teensy halfKay(ATmega32U4) 512 - * Teensy++ halfKay(AT90USB128) 1024 - * - * AVR Boot section is located at the end of Flash memory like the followings. - * - * byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB128) - * 0x0000 +---------------+ 0x00000 +---------------+ - * | | | | - * | | | | - * | Application | | Application | - * | | | | - * = = = = - * | | 32KB-4KB | | 128KB-8KB - * 0x7000 +---------------+ 0x1E000 +---------------+ - * | Bootloader | 4KB | Bootloader | 8KB - * 0x7FFF +---------------+ 0x1FFFF +---------------+ - * - * - * byte Teensy(ATMega32u4) byte Teensy++(AT90SUB128) - * 0x0000 +---------------+ 0x00000 +---------------+ - * | | | | - * | | | | - * | Application | | Application | - * | | | | - * = = = = - * | | 32KB-512B | | 128KB-1KB - * 0x7E00 +---------------+ 0x1FC00 +---------------+ - * | Bootloader | 512B | Bootloader | 1KB - * 0x7FFF +---------------+ 0x1FFFF +---------------+ - */ -#define FLASH_SIZE (FLASHEND + 1L) - -#if !defined(BOOTLOADER_SIZE) -uint16_t bootloader_start; -#endif - -// compatibility between ATMega8 and ATMega88 -#if !defined(MCUCSR) -# if defined(MCUSR) -# define MCUCSR MCUSR -# endif -#endif - -/** \brief Entering the Bootloader via Software - * - * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html - */ -#define BOOTLOADER_RESET_KEY 0xB007B007 -uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;"))); - -/** \brief initialize MCU status by watchdog reset - * - * FIXME: needs doc - */ -__attribute__((weak)) void bootloader_jump(void) { -#if !defined(BOOTLOADER_SIZE) - uint8_t high_fuse = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); - - if (high_fuse & ~(FUSE_BOOTSZ0 & FUSE_BOOTSZ1)) { - bootloader_start = (FLASH_SIZE - 512) >> 1; - } else if (high_fuse & ~(FUSE_BOOTSZ1)) { - bootloader_start = (FLASH_SIZE - 1024) >> 1; - } else if (high_fuse & ~(FUSE_BOOTSZ0)) { - bootloader_start = (FLASH_SIZE - 2048) >> 1; - } else { - bootloader_start = (FLASH_SIZE - 4096) >> 1; - } -#endif - - // Something like this might work, but it compiled larger than the block above - // bootloader_start = FLASH_SIZE - (256 << (~high_fuse & 0b110 >> 1)); - -#if defined(BOOTLOADER_HALFKAY) - // http://www.pjrc.com/teensy/jump_to_bootloader.html - cli(); - // disable watchdog, if enabled (it's not) - // disable all peripherals - // a shutdown call might make sense here - UDCON = 1; - USBCON = (1 << FRZCLK); // disable USB - UCSR1B = 0; - _delay_ms(5); -# if defined(__AVR_AT90USB162__) // Teensy 1.0 - EIMSK = 0; - PCICR = 0; - SPCR = 0; - ACSR = 0; - EECR = 0; - TIMSK0 = 0; - TIMSK1 = 0; - UCSR1B = 0; - DDRB = 0; - DDRC = 0; - DDRD = 0; - PORTB = 0; - PORTC = 0; - PORTD = 0; - asm volatile("jmp 0x3E00"); -# elif defined(__AVR_ATmega32U4__) // Teensy 2.0 - EIMSK = 0; - PCICR = 0; - SPCR = 0; - ACSR = 0; - EECR = 0; - ADCSRA = 0; - TIMSK0 = 0; - TIMSK1 = 0; - TIMSK3 = 0; - TIMSK4 = 0; - UCSR1B = 0; - TWCR = 0; - DDRB = 0; - DDRC = 0; - DDRD = 0; - DDRE = 0; - DDRF = 0; - TWCR = 0; - PORTB = 0; - PORTC = 0; - PORTD = 0; - PORTE = 0; - PORTF = 0; - asm volatile("jmp 0x7E00"); -# elif defined(__AVR_AT90USB646__) // Teensy++ 1.0 - EIMSK = 0; - PCICR = 0; - SPCR = 0; - ACSR = 0; - EECR = 0; - ADCSRA = 0; - TIMSK0 = 0; - TIMSK1 = 0; - TIMSK2 = 0; - TIMSK3 = 0; - UCSR1B = 0; - TWCR = 0; - DDRA = 0; - DDRB = 0; - DDRC = 0; - DDRD = 0; - DDRE = 0; - DDRF = 0; - PORTA = 0; - PORTB = 0; - PORTC = 0; - PORTD = 0; - PORTE = 0; - PORTF = 0; - asm volatile("jmp 0xFC00"); -# elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0 - EIMSK = 0; - PCICR = 0; - SPCR = 0; - ACSR = 0; - EECR = 0; - ADCSRA = 0; - TIMSK0 = 0; - TIMSK1 = 0; - TIMSK2 = 0; - TIMSK3 = 0; - UCSR1B = 0; - TWCR = 0; - DDRA = 0; - DDRB = 0; - DDRC = 0; - DDRD = 0; - DDRE = 0; - DDRF = 0; - PORTA = 0; - PORTB = 0; - PORTC = 0; - PORTD = 0; - PORTE = 0; - PORTF = 0; - asm volatile("jmp 0x1FC00"); -# endif - -#elif defined(BOOTLOADER_CATERINA) - // this block may be optional - // TODO: figure it out - - uint16_t *const bootKeyPtr = (uint16_t *)0x0800; - - // Value used by Caterina bootloader use to determine whether to run the - // sketch or the bootloader programmer. - uint16_t bootKey = 0x7777; - - *bootKeyPtr = bootKey; - - // setup watchdog timeout - wdt_enable(WDTO_60MS); - - while (1) { - } // wait for watchdog timer to trigger - -#elif defined(BOOTLOADER_USBASP) - // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c - wdt_enable(WDTO_15MS); - wdt_reset(); - asm volatile("cli \n\t" - "ldi r29 , %[ramendhi] \n\t" - "ldi r28 , %[ramendlo] \n\t" -# if (FLASHEND > 131071) - "ldi r18 , %[bootaddrhi] \n\t" - "st Y+, r18 \n\t" -# endif - "ldi r18 , %[bootaddrme] \n\t" - "st Y+, r18 \n\t" - "ldi r18 , %[bootaddrlo] \n\t" - "st Y+, r18 \n\t" - "out %[mcucsrio], __zero_reg__ \n\t" - "bootloader_startup_loop%=: \n\t" - "rjmp bootloader_startup_loop%= \n\t" - : - : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)), -# if (FLASHEND > 131071) - [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), -# else - [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff), -# endif - [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); - -#else // Assume remaining boards are DFU, even if the flag isn't set - -# if !(defined(__AVR_ATmega32A__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATtiny85__)) // no USB - maybe BOOTLOADER_BOOTLOADHID instead though? - UDCON = 1; - USBCON = (1 << FRZCLK); // disable USB - UCSR1B = 0; - _delay_ms(5); // 5 seems to work fine -# endif - -# ifdef BOOTLOADER_BOOTLOADHID - // force bootloadHID to stay in bootloader mode, so that it waits - // for a new firmware to be flashed - eeprom_write_byte((uint8_t *)1, 0x00); -# endif - - // watchdog reset - reset_key = BOOTLOADER_RESET_KEY; - wdt_enable(WDTO_250MS); - for (;;) - ; -#endif -} - -/* this runs before main() */ -void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3"))); -void bootloader_jump_after_watchdog_reset(void) { -#ifndef BOOTLOADER_HALFKAY - if ((MCUCSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { - reset_key = 0; - - // My custom USBasploader requires this to come up. - MCUCSR = 0; - - // Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog. - MCUCSR &= ~(1 << WDRF); - wdt_disable(); - -// This is compled into 'icall', address should be in word unit, not byte. -# ifdef BOOTLOADER_SIZE - ((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))(); -# else - asm("ijmp" ::"z"(bootloader_start)); -# endif - } -#endif -} diff --git a/platforms/avr/bootloaders/bootloadhid.c b/platforms/avr/bootloaders/bootloadhid.c new file mode 100644 index 0000000000..ae58760d7d --- /dev/null +++ b/platforms/avr/bootloaders/bootloadhid.c @@ -0,0 +1,33 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/eeprom.h> +#include <avr/wdt.h> + +__attribute__((weak)) void bootloader_jump(void) { + // force bootloadHID to stay in bootloader mode, so that it waits + // for a new firmware to be flashed + // NOTE: this byte is part of QMK's "magic number" - changing it causes the EEPROM to be re-initialized + // thus every time the device is flashed the EEPROM will be wiped + eeprom_write_byte((uint8_t *)1, 0x00); + + // watchdog reset + wdt_enable(WDTO_250MS); + for (;;) + ; +} diff --git a/platforms/avr/bootloaders/caterina.c b/platforms/avr/bootloaders/caterina.c new file mode 100644 index 0000000000..82a16a3765 --- /dev/null +++ b/platforms/avr/bootloaders/caterina.c @@ -0,0 +1,39 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/wdt.h> + +__attribute__((weak)) void bootloader_jump(void) { + // this block may be optional + // TODO: figure it out + + uint16_t *const bootKeyPtr = (uint16_t *)0x0800; + + // Value used by Caterina bootloader use to determine whether to run the + // sketch or the bootloader programmer. + uint16_t bootKey = 0x7777; + + *bootKeyPtr = bootKey; + + // setup watchdog timeout + wdt_enable(WDTO_60MS); + + // wait for watchdog timer to trigger + while (1) { + } +} diff --git a/platforms/avr/bootloaders/dfu.c b/platforms/avr/bootloaders/dfu.c new file mode 100644 index 0000000000..cb42821a93 --- /dev/null +++ b/platforms/avr/bootloaders/dfu.c @@ -0,0 +1,52 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/wdt.h> +#include <util/delay.h> + +#define FLASH_SIZE (FLASHEND + 1L) + +/** \brief Entering the Bootloader via Software + * + * http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html + */ +#define BOOTLOADER_RESET_KEY 0xB007B007 +uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;"))); + +__attribute__((weak)) void bootloader_jump(void) { + UDCON = 1; + USBCON = (1 << FRZCLK); // disable USB + UCSR1B = 0; + _delay_ms(5); // 5 seems to work fine + + // watchdog reset + reset_key = BOOTLOADER_RESET_KEY; + wdt_enable(WDTO_250MS); + for (;;) + ; +} + +/* this runs before main() */ +void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3"))); +void bootloader_jump_after_watchdog_reset(void) { + if ((MCUSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { + reset_key = 0; + + ((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))(); + } +} diff --git a/platforms/avr/bootloaders/halfkay.c b/platforms/avr/bootloaders/halfkay.c new file mode 100644 index 0000000000..6ce2e19114 --- /dev/null +++ b/platforms/avr/bootloaders/halfkay.c @@ -0,0 +1,128 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/interrupt.h> +#include <util/delay.h> + +__attribute__((weak)) void bootloader_jump(void) { + // http://www.pjrc.com/teensy/jump_to_bootloader.html + + cli(); + // disable watchdog, if enabled (it's not) + // disable all peripherals + // a shutdown call might make sense here + UDCON = 1; + USBCON = (1 << FRZCLK); // disable USB + UCSR1B = 0; + _delay_ms(5); + +#if defined(__AVR_AT90USB162__) // Teensy 1.0 + EIMSK = 0; + PCICR = 0; + SPCR = 0; + ACSR = 0; + EECR = 0; + TIMSK0 = 0; + TIMSK1 = 0; + UCSR1B = 0; + DDRB = 0; + DDRC = 0; + DDRD = 0; + PORTB = 0; + PORTC = 0; + PORTD = 0; + asm volatile("jmp 0x3E00"); +#elif defined(__AVR_ATmega32U4__) // Teensy 2.0 + EIMSK = 0; + PCICR = 0; + SPCR = 0; + ACSR = 0; + EECR = 0; + ADCSRA = 0; + TIMSK0 = 0; + TIMSK1 = 0; + TIMSK3 = 0; + TIMSK4 = 0; + UCSR1B = 0; + TWCR = 0; + DDRB = 0; + DDRC = 0; + DDRD = 0; + DDRE = 0; + DDRF = 0; + TWCR = 0; + PORTB = 0; + PORTC = 0; + PORTD = 0; + PORTE = 0; + PORTF = 0; + asm volatile("jmp 0x7E00"); +#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0 + EIMSK = 0; + PCICR = 0; + SPCR = 0; + ACSR = 0; + EECR = 0; + ADCSRA = 0; + TIMSK0 = 0; + TIMSK1 = 0; + TIMSK2 = 0; + TIMSK3 = 0; + UCSR1B = 0; + TWCR = 0; + DDRA = 0; + DDRB = 0; + DDRC = 0; + DDRD = 0; + DDRE = 0; + DDRF = 0; + PORTA = 0; + PORTB = 0; + PORTC = 0; + PORTD = 0; + PORTE = 0; + PORTF = 0; + asm volatile("jmp 0xFC00"); +#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0 + EIMSK = 0; + PCICR = 0; + SPCR = 0; + ACSR = 0; + EECR = 0; + ADCSRA = 0; + TIMSK0 = 0; + TIMSK1 = 0; + TIMSK2 = 0; + TIMSK3 = 0; + UCSR1B = 0; + TWCR = 0; + DDRA = 0; + DDRB = 0; + DDRC = 0; + DDRD = 0; + DDRE = 0; + DDRF = 0; + PORTA = 0; + PORTB = 0; + PORTC = 0; + PORTD = 0; + PORTE = 0; + PORTF = 0; + asm volatile("jmp 0x1FC00"); +#endif +} diff --git a/platforms/avr/bootloaders/none.c b/platforms/avr/bootloaders/none.c new file mode 100644 index 0000000000..624fbe242a --- /dev/null +++ b/platforms/avr/bootloaders/none.c @@ -0,0 +1,19 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +__attribute__((weak)) void bootloader_jump(void) {} diff --git a/platforms/avr/bootloaders/usbasploader.c b/platforms/avr/bootloaders/usbasploader.c new file mode 100644 index 0000000000..008bd16069 --- /dev/null +++ b/platforms/avr/bootloaders/usbasploader.c @@ -0,0 +1,56 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <avr/wdt.h> + +#define FLASH_SIZE (FLASHEND + 1L) + +#if !defined(MCUCSR) +# if defined(MCUSR) +# define MCUCSR MCUSR +# endif +#endif + +__attribute__((weak)) void bootloader_jump(void) { + // Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c + + wdt_enable(WDTO_15MS); + wdt_reset(); + asm volatile("cli \n\t" + "ldi r29 , %[ramendhi] \n\t" + "ldi r28 , %[ramendlo] \n\t" +#if (FLASHEND > 131071) + "ldi r18 , %[bootaddrhi] \n\t" + "st Y+, r18 \n\t" +#endif + "ldi r18 , %[bootaddrme] \n\t" + "st Y+, r18 \n\t" + "ldi r18 , %[bootaddrlo] \n\t" + "st Y+, r18 \n\t" + "out %[mcucsrio], __zero_reg__ \n\t" + "bootloader_startup_loop%=: \n\t" + "rjmp bootloader_startup_loop%= \n\t" + : + : [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)), +#if (FLASHEND > 131071) + [ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), +#else + [ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff), +#endif + [bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); +} diff --git a/platforms/avr/drivers/i2c_master.c b/platforms/avr/drivers/i2c_master.c index 111b55d6b0..d4024378ca 100644 --- a/platforms/avr/drivers/i2c_master.c +++ b/platforms/avr/drivers/i2c_master.c @@ -32,6 +32,9 @@ # define I2C_START_RETRY_COUNT 20 #endif // I2C_START_RETRY_COUNT +#define I2C_ACTION_READ 0x01 +#define I2C_ACTION_WRITE 0x00 + #define TWBR_val (((F_CPU / F_SCL) - 16) / 2) #define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) @@ -154,7 +157,7 @@ int16_t i2c_read_nack(uint16_t timeout) { } i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(address | I2C_WRITE, timeout); + i2c_status_t status = i2c_start(address | I2C_ACTION_WRITE, timeout); for (uint16_t i = 0; i < length && status >= 0; i++) { status = i2c_write(data[i], timeout); @@ -166,7 +169,7 @@ i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, } i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) { - i2c_status_t status = i2c_start(address | I2C_READ, timeout); + i2c_status_t status = i2c_start(address | I2C_ACTION_READ, timeout); for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { status = i2c_read_ack(timeout); diff --git a/platforms/avr/drivers/serial.c b/platforms/avr/drivers/serial.c index 9a7345a53d..ab0b52afd1 100644 --- a/platforms/avr/drivers/serial.c +++ b/platforms/avr/drivers/serial.c @@ -16,6 +16,7 @@ #include <util/delay.h> #include <stddef.h> #include <stdbool.h> +#include "gpio.h" #include "serial.h" #ifdef SOFT_SERIAL_PIN @@ -119,12 +120,6 @@ # error invalid SOFT_SERIAL_PIN value # endif -# define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) -# define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF)) -# define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF))) - # define ALWAYS_INLINE __attribute__((always_inline)) # define NO_INLINE __attribute__((noinline)) # define _delay_sub_us(x) __builtin_avr_delay_cycles(x) diff --git a/platforms/avr/gpio.h b/platforms/avr/gpio.h index e9be68491d..95f15c28dc 100644 --- a/platforms/avr/gpio.h +++ b/platforms/avr/gpio.h @@ -25,7 +25,9 @@ typedef uint8_t pin_t; #define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF)) #define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) #define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low") -#define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF)) +#define setPinOutputPushPull(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF)) +#define setPinOutputOpenDrain(pin) _Static_assert(0, "AVR platform does not implement an open-drain output") +#define setPinOutput(pin) setPinOutputPushPull(pin) #define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF)) #define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF)) @@ -34,16 +36,3 @@ typedef uint8_t pin_t; #define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF))) #define togglePin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF)) - -/* Operation of GPIO by port. */ - -typedef uint8_t port_data_t; - -#define readPort(port) PINx_ADDRESS(port) - -#define setPortBitInput(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) &= ~_BV((bit)&0xF)) -#define setPortBitInputHigh(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) |= _BV((bit)&0xF)) -#define setPortBitOutput(port, bit) (DDRx_ADDRESS(port) |= _BV((bit)&0xF)) - -#define writePortBitLow(port, bit) (PORTx_ADDRESS(port) &= ~_BV((bit)&0xF)) -#define writePortBitHigh(port, bit) (PORTx_ADDRESS(port) |= _BV((bit)&0xF)) diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h deleted file mode 100644 index 4da3d39a32..0000000000 --- a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/bootloader_defs.h +++ /dev/null @@ -1,5 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h deleted file mode 100644 index 4da3d39a32..0000000000 --- a/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/bootloader_defs.h +++ /dev/null @@ -1,5 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h deleted file mode 100644 index 25113425a6..0000000000 --- a/platforms/chibios/boards/GENERIC_STM32_F042X6/configs/bootloader_defs.h +++ /dev/null @@ -1,5 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC400 diff --git a/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h deleted file mode 100644 index dccd0fa5d1..0000000000 --- a/platforms/chibios/boards/GENERIC_STM32_F072XB/configs/bootloader_defs.h +++ /dev/null @@ -1,5 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h deleted file mode 100644 index 87ac7b10dc..0000000000 --- a/platforms/chibios/boards/GENERIC_STM32_F303XC/configs/bootloader_defs.h +++ /dev/null @@ -1,5 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h index cc52a953ed..90a41326a1 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h @@ -17,7 +17,7 @@ /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 + #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h index cc52a953ed..90a41326a1 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/config.h @@ -17,7 +17,7 @@ /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 + #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h index cc52a953ed..90a41326a1 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/config.h @@ -17,7 +17,7 @@ /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 + #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif diff --git a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h deleted file mode 100644 index 39ce627e77..0000000000 --- a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/config.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2018-2020 Nick Brassel (@tzarc) - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here (page 175): - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h index c27c61b19a..fc9055ccfb 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L412XB/configs/config.h @@ -17,7 +17,6 @@ /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 #define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH diff --git a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h index c27c61b19a..fc9055ccfb 100644 --- a/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h +++ b/platforms/chibios/boards/GENERIC_STM32_L433XC/configs/config.h @@ -17,7 +17,6 @@ /* Address for jumping to bootloader on STM32 chips. */ /* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 #define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h deleted file mode 100644 index c929d2ad03..0000000000 --- a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h +++ /dev/null @@ -1,12 +0,0 @@ -/* Address for jumping to bootloader on WB32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.westberrytech.com/down/mcu/data/WB32F3G71xx_rm.pdf - */ -#ifndef WB32_BOOTLOADER_ADDRESS -# undef STM32_BOOTLOADER_ADDRESS -# define WB32_BOOTLOADER_ADDRESS 0x1FFFE000 -# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS -#else -# undef STM32_BOOTLOADER_ADDRESS -# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS -#endif diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h b/platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h deleted file mode 100644 index 3b0e9d20a6..0000000000 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/bootloader_defs.h +++ /dev/null @@ -1,7 +0,0 @@ -/* Address for jumping to bootloader on STM32 chips. */ -/* It is chip dependent, the correct number can be looked up here: - * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf - * This also requires a patch to chibios: - * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch - */ -#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 diff --git a/platforms/chibios/bootloader.c b/platforms/chibios/bootloader.c deleted file mode 100644 index 58212948b0..0000000000 --- a/platforms/chibios/bootloader.c +++ /dev/null @@ -1,145 +0,0 @@ -#include "bootloader.h" - -#include <ch.h> -#include <hal.h> -#include "wait.h" - -/* This code should be checked whether it runs correctly on platforms */ -#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) -#define BOOTLOADER_MAGIC 0xDEADBEEF -#define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4) - -#ifndef STM32_BOOTLOADER_DUAL_BANK -# define STM32_BOOTLOADER_DUAL_BANK FALSE -#endif - -#ifdef BOOTLOADER_TINYUF2 - -# define DBL_TAP_MAGIC 0xf01669ef // From tinyuf2's board_api.h - -// defined by linker script -extern uint32_t _board_dfu_dbl_tap[]; -# define DBL_TAP_REG _board_dfu_dbl_tap[0] - -void bootloader_jump(void) { - DBL_TAP_REG = DBL_TAP_MAGIC; - NVIC_SystemReset(); -} - -void enter_bootloader_mode_if_requested(void) { /* not needed, no two-stage reset */ -} - -#elif STM32_BOOTLOADER_DUAL_BANK - -// Need pin definitions -# include "config_common.h" - -# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO -# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle" -# endif - -# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY -# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0 -# endif - -# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY -# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000 -# endif - -extern uint32_t __ram0_end__; - -__attribute__((weak)) void bootloader_jump(void) { - // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash - // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do - // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to - // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord - // #hardware channel pins for an example circuit. - palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL); -# if STM32_BOOTLOADER_DUAL_BANK_POLARITY - palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); -# else - palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); -# endif - - // Wait for a while for the capacitor to charge - wait_ms(100); - - // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high - NVIC_SystemReset(); -} - -void enter_bootloader_mode_if_requested(void) {} // not needed at all, but if anybody attempts to invoke it.... - -#elif defined(STM32_BOOTLOADER_ADDRESS) // STM32_BOOTLOADER_DUAL_BANK - -extern uint32_t __ram0_end__; - -__attribute__((weak)) void bootloader_jump(void) { - *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader - NVIC_SystemReset(); -} - -void enter_bootloader_mode_if_requested(void) { - unsigned long *check = MAGIC_ADDR; - if (*check == BOOTLOADER_MAGIC) { - *check = 0; - __set_CONTROL(0); - __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS); - __enable_irq(); - - typedef void (*BootJump_t)(void); - BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4); - boot_jump(); - while (1) - ; - } -} - -#elif defined(GD32VF103) - -# define DBGMCU_KEY_UNLOCK 0x4B5A6978 -# define DBGMCU_CMD_RESET 0x1 - -__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU; -__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U; - -__attribute__((weak)) void bootloader_jump(void) { - /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST - * register to generate a software reset request. - * BUT instead two undocumented registers in the debug peripheral - * that allow issueing a software reset. WHO would need the MSFRST - * register anyway? Source: - * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */ - *DBGMCU_KEY = DBGMCU_KEY_UNLOCK; - *DBGMCU_CMD = DBGMCU_CMD_RESET; -} - -void enter_bootloader_mode_if_requested(void) { /* Jumping to bootloader is not possible from user code. */ -} - -#elif defined(KL2x) || defined(K20x) || defined(MK66F18) || defined(MIMXRT1062) // STM32_BOOTLOADER_DUAL_BANK // STM32_BOOTLOADER_ADDRESS -/* Kinetis */ - -# if defined(BOOTLOADER_KIIBOHD) -/* Kiibohd Bootloader (MCHCK and Infinity KB) */ -# define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 -const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"; -__attribute__((weak)) void bootloader_jump(void) { - void *volatile vbat = (void *)VBAT; - __builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); - // request reset - SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; -} - -# else /* defined(BOOTLOADER_KIIBOHD) */ -/* Default for Kinetis - expecting an ARM Teensy */ -# include "wait.h" -__attribute__((weak)) void bootloader_jump(void) { - wait_ms(100); - __BKPT(0); -} -# endif /* defined(BOOTLOADER_KIIBOHD) */ - -#else /* neither STM32 nor KINETIS */ -__attribute__((weak)) void bootloader_jump(void) {} -#endif diff --git a/platforms/chibios/bootloaders/gd32v_dfu.c b/platforms/chibios/bootloaders/gd32v_dfu.c new file mode 100644 index 0000000000..baa7d1f882 --- /dev/null +++ b/platforms/chibios/bootloaders/gd32v_dfu.c @@ -0,0 +1,40 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> +#include <hal.h> + +#define DBGMCU_KEY_UNLOCK 0x4B5A6978 +#define DBGMCU_CMD_RESET 0x1 + +__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU; +__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U; + +__attribute__((weak)) void bootloader_jump(void) { + /* The MTIMER unit of the GD32VF103 doesn't have the MSFRST + * register to generate a software reset request. + * BUT instead two undocumented registers in the debug peripheral + * that allow issueing a software reset. WHO would need the MSFRST + * register anyway? Source: + * https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */ + *DBGMCU_KEY = DBGMCU_KEY_UNLOCK; + *DBGMCU_CMD = DBGMCU_CMD_RESET; +} + +/* Jumping to bootloader is not possible from user code. */ +void enter_bootloader_mode_if_requested(void) {} diff --git a/platforms/chibios/bootloaders/halfkay.c b/platforms/chibios/bootloaders/halfkay.c new file mode 100644 index 0000000000..168c2abc23 --- /dev/null +++ b/platforms/chibios/bootloaders/halfkay.c @@ -0,0 +1,25 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> +#include "wait.h" + +__attribute__((weak)) void bootloader_jump(void) { + wait_ms(100); + __BKPT(0); +} diff --git a/platforms/chibios/bootloaders/kiibohd.c b/platforms/chibios/bootloaders/kiibohd.c new file mode 100644 index 0000000000..911e807092 --- /dev/null +++ b/platforms/chibios/bootloaders/kiibohd.c @@ -0,0 +1,32 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> + +/* Kiibohd Bootloader (MCHCK and Infinity KB) */ +#define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 + +const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"; + +__attribute__((weak)) void bootloader_jump(void) { + void *volatile vbat = (void *)VBAT; + __builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); + + // request reset + SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; +} diff --git a/platforms/chibios/bootloaders/none.c b/platforms/chibios/bootloaders/none.c new file mode 100644 index 0000000000..624fbe242a --- /dev/null +++ b/platforms/chibios/bootloaders/none.c @@ -0,0 +1,19 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +__attribute__((weak)) void bootloader_jump(void) {} diff --git a/platforms/chibios/bootloaders/stm32_dfu.c b/platforms/chibios/bootloaders/stm32_dfu.c new file mode 100644 index 0000000000..0a113570f7 --- /dev/null +++ b/platforms/chibios/bootloaders/stm32_dfu.c @@ -0,0 +1,94 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> +#include <hal.h> +#include "wait.h" + +extern uint32_t __ram0_end__; + +#ifndef STM32_BOOTLOADER_DUAL_BANK +# define STM32_BOOTLOADER_DUAL_BANK FALSE +#endif + +#if STM32_BOOTLOADER_DUAL_BANK +# include "config_common.h" + +# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO +# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle" +# endif + +# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY +# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0 +# endif + +# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY +# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000 +# endif + +__attribute__((weak)) void bootloader_jump(void) { + // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash + // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do + // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to + // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord + // #hardware channel pins for an example circuit. + palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL); +# if STM32_BOOTLOADER_DUAL_BANK_POLARITY + palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); +# else + palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); +# endif + + // Wait for a while for the capacitor to charge + wait_ms(100); + + // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high + NVIC_SystemReset(); +} + +// not needed at all, but if anybody attempts to invoke it.... +void enter_bootloader_mode_if_requested(void) {} + +#else + +/* This code should be checked whether it runs correctly on platforms */ +# define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) +# define BOOTLOADER_MAGIC 0xDEADBEEF +# define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4) + +__attribute__((weak)) void bootloader_jump(void) { + *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader + NVIC_SystemReset(); +} + +void enter_bootloader_mode_if_requested(void) { + unsigned long *check = MAGIC_ADDR; + if (*check == BOOTLOADER_MAGIC) { + *check = 0; + __set_CONTROL(0); + __set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS); + __enable_irq(); + + typedef void (*BootJump_t)(void); + BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4); + boot_jump(); + while (1) + ; + } +} +#endif diff --git a/platforms/chibios/bootloaders/stm32duino.c b/platforms/chibios/bootloaders/stm32duino.c new file mode 100644 index 0000000000..dd1d551fa9 --- /dev/null +++ b/platforms/chibios/bootloaders/stm32duino.c @@ -0,0 +1,21 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> + +__attribute__((weak)) void bootloader_jump(void) { NVIC_SystemReset(); } diff --git a/platforms/chibios/bootloaders/tinyuf2.c b/platforms/chibios/bootloaders/tinyuf2.c new file mode 100644 index 0000000000..9ffca5dec8 --- /dev/null +++ b/platforms/chibios/bootloaders/tinyuf2.c @@ -0,0 +1,34 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "bootloader.h" + +#include <ch.h> + +// From tinyuf2's board_api.h +#define DBL_TAP_MAGIC 0xF01669EF + +// defined by linker script +extern uint32_t _board_dfu_dbl_tap[]; +#define DBL_TAP_REG _board_dfu_dbl_tap[0] + +__attribute__((weak)) void bootloader_jump(void) { + DBL_TAP_REG = DBL_TAP_MAGIC; + NVIC_SystemReset(); +} + +/* not needed, no two-stage reset */ +void enter_bootloader_mode_if_requested(void) {} diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c index 43591d56f8..4a5d4760d0 100644 --- a/platforms/chibios/drivers/i2c_master.c +++ b/platforms/chibios/drivers/i2c_master.c @@ -27,8 +27,67 @@ #include "quantum.h" #include "i2c_master.h" #include <string.h> +#include <ch.h> #include <hal.h> +#ifndef I2C1_SCL_PIN +# define I2C1_SCL_PIN B6 +#endif +#ifndef I2C1_SDA_PIN +# define I2C1_SDA_PIN B7 +#endif + +#ifdef USE_I2CV1 +# ifndef I2C1_OPMODE +# define I2C1_OPMODE OPMODE_I2C +# endif +# ifndef I2C1_CLOCK_SPEED +# define I2C1_CLOCK_SPEED 100000 /* 400000 */ +# endif +# ifndef I2C1_DUTY_CYCLE +# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */ +# endif +#else +// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock +// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html +# ifndef I2C1_TIMINGR_PRESC +# define I2C1_TIMINGR_PRESC 0U +# endif +# ifndef I2C1_TIMINGR_SCLDEL +# define I2C1_TIMINGR_SCLDEL 7U +# endif +# ifndef I2C1_TIMINGR_SDADEL +# define I2C1_TIMINGR_SDADEL 0U +# endif +# ifndef I2C1_TIMINGR_SCLH +# define I2C1_TIMINGR_SCLH 38U +# endif +# ifndef I2C1_TIMINGR_SCLL +# define I2C1_TIMINGR_SCLL 129U +# endif +#endif + +#ifndef I2C_DRIVER +# define I2C_DRIVER I2CD1 +#endif + +#ifdef USE_GPIOV1 +# ifndef I2C1_SCL_PAL_MODE +# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN +# endif +# ifndef I2C1_SDA_PAL_MODE +# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN +# endif +#else +// The default PAL alternate modes are used to signal that the pins are used for I2C +# ifndef I2C1_SCL_PAL_MODE +# define I2C1_SCL_PAL_MODE 4 +# endif +# ifndef I2C1_SDA_PAL_MODE +# define I2C1_SDA_PAL_MODE 4 +# endif +#endif + static uint8_t i2c_address; static const I2CConfig i2cconfig = { diff --git a/platforms/chibios/drivers/i2c_master.h b/platforms/chibios/drivers/i2c_master.h index 5f082e9d1e..deee7ecc08 100644 --- a/platforms/chibios/drivers/i2c_master.h +++ b/platforms/chibios/drivers/i2c_master.h @@ -24,66 +24,7 @@ */ #pragma once -#include <ch.h> -#include <hal.h> - -#ifndef I2C1_SCL_PIN -# define I2C1_SCL_PIN B6 -#endif -#ifndef I2C1_SDA_PIN -# define I2C1_SDA_PIN B7 -#endif - -#ifdef USE_I2CV1 -# ifndef I2C1_OPMODE -# define I2C1_OPMODE OPMODE_I2C -# endif -# ifndef I2C1_CLOCK_SPEED -# define I2C1_CLOCK_SPEED 100000 /* 400000 */ -# endif -# ifndef I2C1_DUTY_CYCLE -# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */ -# endif -#else -// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock -// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html -# ifndef I2C1_TIMINGR_PRESC -# define I2C1_TIMINGR_PRESC 0U -# endif -# ifndef I2C1_TIMINGR_SCLDEL -# define I2C1_TIMINGR_SCLDEL 7U -# endif -# ifndef I2C1_TIMINGR_SDADEL -# define I2C1_TIMINGR_SDADEL 0U -# endif -# ifndef I2C1_TIMINGR_SCLH -# define I2C1_TIMINGR_SCLH 38U -# endif -# ifndef I2C1_TIMINGR_SCLL -# define I2C1_TIMINGR_SCLL 129U -# endif -#endif - -#ifndef I2C_DRIVER -# define I2C_DRIVER I2CD1 -#endif - -#ifdef USE_GPIOV1 -# ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN -# endif -# ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN -# endif -#else -// The default PAL alternate modes are used to signal that the pins are used for I2C -# ifndef I2C1_SCL_PAL_MODE -# define I2C1_SCL_PAL_MODE 4 -# endif -# ifndef I2C1_SDA_PAL_MODE -# define I2C1_SDA_PAL_MODE 4 -# endif -#endif +#include <stdint.h> typedef int16_t i2c_status_t; diff --git a/platforms/chibios/gpio.h b/platforms/chibios/gpio.h index 4d057f1cab..eb44a18f9c 100644 --- a/platforms/chibios/gpio.h +++ b/platforms/chibios/gpio.h @@ -22,10 +22,12 @@ typedef ioline_t pin_t; /* Operation of GPIO by pin. */ -#define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT) -#define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP) -#define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN) -#define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL) +#define setPinInput(pin) palSetLineMode((pin), PAL_MODE_INPUT) +#define setPinInputHigh(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLUP) +#define setPinInputLow(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLDOWN) +#define setPinOutputPushPull(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_PUSHPULL) +#define setPinOutputOpenDrain(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_OPENDRAIN) +#define setPinOutput(pin) setPinOutputPushPull(pin) #define writePinHigh(pin) palSetLine(pin) #define writePinLow(pin) palClearLine(pin) @@ -34,17 +36,3 @@ typedef ioline_t pin_t; #define readPin(pin) palReadLine(pin) #define togglePin(pin) palToggleLine(pin) - -/* Operation of GPIO by port. */ - -typedef uint16_t port_data_t; - -#define readPort(pin) palReadPort(PAL_PORT(pin)) - -#define setPortBitInput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT) -#define setPortBitInputHigh(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLUP) -#define setPortBitInputLow(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLDOWN) -#define setPortBitOutput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_OUTPUT_PUSHPULL) - -#define writePortBitLow(pin, bit) palClearLine(PAL_LINE(PAL_PORT(pin), bit)) -#define writePortBitHigh(pin, bit) palSetLine(PAL_LINE(PAL_PORT(pin), bit)) diff --git a/platforms/common.mk b/platforms/common.mk index f7a0fc7028..12ab45f823 100644 --- a/platforms/common.mk +++ b/platforms/common.mk @@ -4,7 +4,7 @@ TMK_COMMON_SRC += \ $(PLATFORM_COMMON_DIR)/platform.c \ $(PLATFORM_COMMON_DIR)/suspend.c \ $(PLATFORM_COMMON_DIR)/timer.c \ - $(PLATFORM_COMMON_DIR)/bootloader.c \ + $(PLATFORM_COMMON_DIR)/bootloaders/$(BOOTLOADER_TYPE).c # Search Path VPATH += $(PLATFORM_PATH) diff --git a/platforms/test/bootloader.c b/platforms/test/bootloaders/none.c index 5155d9ff04..5155d9ff04 100644 --- a/platforms/test/bootloader.c +++ b/platforms/test/bootloaders/none.c diff --git a/quantum/action.c b/quantum/action.c index 5e81efb671..ea2310a4d9 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -794,7 +794,7 @@ void process_action(keyrecord_t *record, action_t action) { * * FIXME: Needs documentation. */ -void register_code(uint8_t code) { +__attribute__((weak)) void register_code(uint8_t code) { if (code == KC_NO) { return; } @@ -890,7 +890,7 @@ void register_code(uint8_t code) { * * FIXME: Needs documentation. */ -void unregister_code(uint8_t code) { +__attribute__((weak)) void unregister_code(uint8_t code) { if (code == KC_NO) { return; } @@ -955,7 +955,7 @@ void unregister_code(uint8_t code) { * \param code The basic keycode to tap. * \param delay The amount of time in milliseconds to leave the keycode registered, before unregistering it. */ -void tap_code_delay(uint8_t code, uint16_t delay) { +__attribute__((weak)) void tap_code_delay(uint8_t code, uint16_t delay) { register_code(code); for (uint16_t i = delay; i > 0; i--) { wait_ms(1); @@ -967,13 +967,13 @@ void tap_code_delay(uint8_t code, uint16_t delay) { * * \param code The basic keycode to tap. If `code` is `KC_CAPS_LOCK`, the delay will be `TAP_HOLD_CAPS_DELAY`, otherwise `TAP_CODE_DELAY`, if defined. */ -void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); } +__attribute__((weak)) void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); } /** \brief Adds the given physically pressed modifiers and sends a keyboard report immediately. * * \param mods A bitfield of modifiers to register. */ -void register_mods(uint8_t mods) { +__attribute__((weak)) void register_mods(uint8_t mods) { if (mods) { add_mods(mods); send_keyboard_report(); @@ -984,7 +984,7 @@ void register_mods(uint8_t mods) { * * \param mods A bitfield of modifiers to unregister. */ -void unregister_mods(uint8_t mods) { +__attribute__((weak)) void unregister_mods(uint8_t mods) { if (mods) { del_mods(mods); send_keyboard_report(); @@ -995,7 +995,7 @@ void unregister_mods(uint8_t mods) { * * \param mods A bitfield of modifiers to register. */ -void register_weak_mods(uint8_t mods) { +__attribute__((weak)) void register_weak_mods(uint8_t mods) { if (mods) { add_weak_mods(mods); send_keyboard_report(); @@ -1006,7 +1006,7 @@ void register_weak_mods(uint8_t mods) { * * \param mods A bitfield of modifiers to unregister. */ -void unregister_weak_mods(uint8_t mods) { +__attribute__((weak)) void unregister_weak_mods(uint8_t mods) { if (mods) { del_weak_mods(mods); send_keyboard_report(); diff --git a/quantum/action_util.c b/quantum/action_util.c index 78e02aec18..7e30593fb1 100644 --- a/quantum/action_util.c +++ b/quantum/action_util.c @@ -21,6 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "action_layer.h" #include "timer.h" #include "keycode_config.h" +#include <string.h> extern keymap_config_t keymap_config; @@ -247,7 +248,13 @@ void send_keyboard_report(void) { keyboard_report->mods |= weak_override_mods; #endif - host_keyboard_send(keyboard_report); + static report_keyboard_t last_report; + + /* Only send the report if there are changes to propagate to the host. */ + if (memcmp(keyboard_report, &last_report, sizeof(report_keyboard_t)) != 0) { + memcpy(&last_report, keyboard_report, sizeof(report_keyboard_t)); + host_keyboard_send(keyboard_report); + } } /** \brief Get mods diff --git a/quantum/audio/audio.c b/quantum/audio/audio.c index 49bb309e80..b3d6389dd5 100644 --- a/quantum/audio/audio.c +++ b/quantum/audio/audio.c @@ -160,6 +160,8 @@ void audio_toggle(void) { eeconfig_update_audio(audio_config.raw); if (audio_config.enable) { audio_on_user(); + } else { + audio_off_user(); } } @@ -172,6 +174,7 @@ void audio_on(void) { void audio_off(void) { PLAY_SONG(audio_off_song); + audio_off_user(); wait_ms(100); audio_stop_all(); audio_config.enable = 0; diff --git a/quantum/debounce.h b/quantum/debounce.h index 5043868289..3532d9cd7b 100644 --- a/quantum/debounce.h +++ b/quantum/debounce.h @@ -6,8 +6,6 @@ // changed is true if raw has changed since the last call void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed); -bool debounce_active(void); - void debounce_init(uint8_t num_rows); void debounce_free(void); diff --git a/quantum/debounce/asym_eager_defer_pk.c b/quantum/debounce/asym_eager_defer_pk.c index 81f39383c4..b1eb4a2b7b 100644 --- a/quantum/debounce/asym_eager_defer_pk.c +++ b/quantum/debounce/asym_eager_defer_pk.c @@ -165,7 +165,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui } } -bool debounce_active(void) { return true; } #else # include "none.c" #endif diff --git a/quantum/debounce/none.c b/quantum/debounce/none.c index b03892bc5b..8a85cc04a8 100644 --- a/quantum/debounce/none.c +++ b/quantum/debounce/none.c @@ -26,6 +26,4 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool } } -bool debounce_active(void) { return false; } - void debounce_free(void) {} diff --git a/quantum/debounce/sym_defer_g.c b/quantum/debounce/sym_defer_g.c index 9155eb914c..8cac1c37f9 100644 --- a/quantum/debounce/sym_defer_g.c +++ b/quantum/debounce/sym_defer_g.c @@ -44,8 +44,6 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool } } -bool debounce_active(void) { return debouncing; } - void debounce_free(void) {} #else // no debouncing. # include "none.c" diff --git a/quantum/debounce/sym_defer_pk.c b/quantum/debounce/sym_defer_pk.c index 1b698ba347..9dee29e28e 100644 --- a/quantum/debounce/sym_defer_pk.c +++ b/quantum/debounce/sym_defer_pk.c @@ -134,7 +134,6 @@ static void start_debounce_counters(matrix_row_t raw[], matrix_row_t cooked[], u } } -bool debounce_active(void) { return true; } #else # include "none.c" #endif diff --git a/quantum/debounce/sym_defer_pr.c b/quantum/debounce/sym_defer_pr.c new file mode 100644 index 0000000000..8b33acc6a2 --- /dev/null +++ b/quantum/debounce/sym_defer_pr.c @@ -0,0 +1,72 @@ +/* +Copyright 2021 Chad Austin <chad@chadaustin.me> +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +/* +Symmetric per-row debounce algorithm. Changes only apply when +DEBOUNCE milliseconds have elapsed since the last change. +*/ + +#include "matrix.h" +#include "timer.h" +#include "quantum.h" +#include <stdlib.h> + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +static uint16_t last_time; +// [row] milliseconds until key's state is considered debounced. +static uint8_t* countdowns; +// [row] +static matrix_row_t* last_raw; + +void debounce_init(uint8_t num_rows) { + countdowns = (uint8_t*)calloc(num_rows, sizeof(uint8_t)); + last_raw = (matrix_row_t*)calloc(num_rows, sizeof(matrix_row_t)); + + last_time = timer_read(); +} + +void debounce_free(void) { + free(countdowns); + countdowns = NULL; + free(last_raw); + last_raw = NULL; +} + +void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) { + uint16_t now = timer_read(); + uint16_t elapsed16 = TIMER_DIFF_16(now, last_time); + last_time = now; + uint8_t elapsed = (elapsed16 > 255) ? 255 : elapsed16; + + uint8_t* countdown = countdowns; + + for (uint8_t row = 0; row < num_rows; ++row, ++countdown) { + matrix_row_t raw_row = raw[row]; + + if (raw_row != last_raw[row]) { + *countdown = DEBOUNCE; + last_raw[row] = raw_row; + } else if (*countdown > elapsed) { + *countdown -= elapsed; + } else if (*countdown) { + cooked[row] = raw_row; + *countdown = 0; + } + } +} + +bool debounce_active(void) { return true; } diff --git a/quantum/debounce/sym_eager_pk.c b/quantum/debounce/sym_eager_pk.c index 9da000ea9a..deec463649 100644 --- a/quantum/debounce/sym_eager_pk.c +++ b/quantum/debounce/sym_eager_pk.c @@ -140,7 +140,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui } } -bool debounce_active(void) { return true; } #else # include "none.c" #endif diff --git a/quantum/debounce/sym_eager_pr.c b/quantum/debounce/sym_eager_pr.c index eda92a263b..29b0cabefb 100644 --- a/quantum/debounce/sym_eager_pr.c +++ b/quantum/debounce/sym_eager_pr.c @@ -132,7 +132,6 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui } } -bool debounce_active(void) { return true; } #else # include "none.c" #endif diff --git a/quantum/debounce/tests/rules.mk b/quantum/debounce/tests/rules.mk index e908dd6f67..8318b1c668 100644 --- a/quantum/debounce/tests/rules.mk +++ b/quantum/debounce/tests/rules.mk @@ -28,6 +28,11 @@ debounce_sym_defer_pk_SRC := $(DEBOUNCE_COMMON_SRC) \ $(QUANTUM_PATH)/debounce/sym_defer_pk.c \ $(QUANTUM_PATH)/debounce/tests/sym_defer_pk_tests.cpp +debounce_sym_defer_pr_DEFS := $(DEBOUNCE_COMMON_DEFS) +debounce_sym_defer_pr_SRC := $(DEBOUNCE_COMMON_SRC) \ + $(QUANTUM_PATH)/debounce/sym_defer_pr.c \ + $(QUANTUM_PATH)/debounce/tests/sym_defer_pr_tests.cpp + debounce_sym_eager_pk_DEFS := $(DEBOUNCE_COMMON_DEFS) debounce_sym_eager_pk_SRC := $(DEBOUNCE_COMMON_SRC) \ $(QUANTUM_PATH)/debounce/sym_eager_pk.c \ diff --git a/quantum/debounce/tests/sym_defer_pr_tests.cpp b/quantum/debounce/tests/sym_defer_pr_tests.cpp new file mode 100644 index 0000000000..417e1f4ca2 --- /dev/null +++ b/quantum/debounce/tests/sym_defer_pr_tests.cpp @@ -0,0 +1,238 @@ +/* Copyright 2021 Simon Arlott + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "gtest/gtest.h" + +#include "debounce_test_common.h" + +TEST_F(DebounceTest, OneKeyShort1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + /* 0ms delay (fast scan rate) */ + {5, {{0, 1, UP}}, {}}, + + {10, {}, {{0, 1, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyShort2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + /* 1ms delay */ + {6, {{0, 1, UP}}, {}}, + + {11, {}, {{0, 1, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyShort3) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + /* 2ms delay */ + {7, {{0, 1, UP}}, {}}, + + {12, {}, {{0, 1, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyTooQuick1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + /* Release key exactly on the debounce time */ + {5, {{0, 1, UP}}, {}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyTooQuick2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + {6, {{0, 1, UP}}, {}}, + + /* Press key exactly on the debounce time */ + {11, {{0, 1, DOWN}}, {}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyBouncing1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + {1, {{0, 1, UP}}, {}}, + {2, {{0, 1, DOWN}}, {}}, + {3, {{0, 1, UP}}, {}}, + {4, {{0, 1, DOWN}}, {}}, + {5, {{0, 1, UP}}, {}}, + {6, {{0, 1, DOWN}}, {}}, + {11, {}, {{0, 1, DOWN}}}, /* 5ms after DOWN at time 7 */ + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyBouncing2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + {5, {}, {{0, 1, DOWN}}}, + {6, {{0, 1, UP}}, {}}, + {7, {{0, 1, DOWN}}, {}}, + {8, {{0, 1, UP}}, {}}, + {9, {{0, 1, DOWN}}, {}}, + {10, {{0, 1, UP}}, {}}, + {15, {}, {{0, 1, UP}}}, /* 5ms after UP at time 10 */ + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyLong) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}}}, + + {25, {{0, 1, UP}}, {}}, + + {30, {}, {{0, 1, UP}}}, + + {50, {{0, 1, DOWN}}, {}}, + + {55, {}, {{0, 1, DOWN}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, TwoKeysShort) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + {1, {{0, 2, DOWN}}, {}}, + + {6, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, + + {7, {{0, 1, UP}}, {}}, + {8, {{0, 2, UP}}, {}}, + + {13, {}, {{0, 1, UP}, {0, 2, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, TwoKeysSimultaneous1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {}}, + + {5, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, + {6, {{0, 1, UP}, {0, 2, UP}}, {}}, + + {11, {}, {{0, 1, UP}, {0, 2, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, TwoKeysSimultaneous2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + {1, {{0, 2, DOWN}}, {}}, + + {6, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, + {7, {{0, 2, UP}}, {}}, + {9, {{0, 1, UP}}, {}}, + + // Debouncing loses the specific ordering -- both events report simultaneously. + {14, {}, {{0, 1, UP}, {0, 2, UP}}}, + }); + runEvents(); +} + +TEST_F(DebounceTest, OneKeyDelayedScan1) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + /* Processing is very late */ + {300, {}, {{0, 1, DOWN}}}, + /* Immediately release key */ + {300, {{0, 1, UP}}, {}}, + + {305, {}, {{0, 1, UP}}}, + }); + time_jumps_ = true; + runEvents(); +} + +TEST_F(DebounceTest, OneKeyDelayedScan2) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + /* Processing is very late */ + {300, {}, {{0, 1, DOWN}}}, + /* Release key after 1ms */ + {301, {{0, 1, UP}}, {}}, + + {306, {}, {{0, 1, UP}}}, + }); + time_jumps_ = true; + runEvents(); +} + +TEST_F(DebounceTest, OneKeyDelayedScan3) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + /* Release key before debounce expires */ + {300, {{0, 1, UP}}, {}}, + }); + time_jumps_ = true; + runEvents(); +} + +TEST_F(DebounceTest, OneKeyDelayedScan4) { + addEvents({ + /* Time, Inputs, Outputs */ + {0, {{0, 1, DOWN}}, {}}, + + /* Processing is a bit late */ + {50, {}, {{0, 1, DOWN}}}, + /* Release key after 1ms */ + {51, {{0, 1, UP}}, {}}, + + {56, {}, {{0, 1, UP}}}, + }); + time_jumps_ = true; + runEvents(); +} diff --git a/quantum/debounce/tests/testlist.mk b/quantum/debounce/tests/testlist.mk index c54c45aa63..f7bd520698 100644 --- a/quantum/debounce/tests/testlist.mk +++ b/quantum/debounce/tests/testlist.mk @@ -1,6 +1,7 @@ TEST_LIST += \ debounce_sym_defer_g \ debounce_sym_defer_pk \ + debounce_sym_defer_pr \ debounce_sym_eager_pk \ debounce_sym_eager_pr \ debounce_asym_eager_defer_pk diff --git a/quantum/keyboard.c b/quantum/keyboard.c index 3bca05aab7..67f7381f74 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -349,6 +349,32 @@ void keyboard_init(void) { keyboard_post_init_kb(); /* Always keep this last */ } +/** \brief keyboard set leds + * + * FIXME: needs doc + */ +void keyboard_set_leds(uint8_t leds) { + if (debug_keyboard) { + debug("keyboard_set_led: "); + debug_hex8(leds); + debug("\n"); + } + led_set(leds); +} + +/** \brief set host led state + * + * Only sets state if change detected + */ +void led_task(void) { + static uint8_t led_status = 0; + // update LED + if (led_status != host_keyboard_leds()) { + led_status = host_keyboard_leds(); + keyboard_set_leds(led_status); + } +} + /** \brief key_event_task * * This function is responsible for calling into other systems when they need to respond to electrical switch press events. @@ -363,28 +389,17 @@ void switch_events(uint8_t row, uint8_t col, bool pressed) { #endif } -/** \brief Keyboard task: Do keyboard routine jobs - * - * Do routine keyboard jobs: +/** \brief Perform scan of keyboard matrix * - * * scan matrix - * * handle mouse movements - * * handle midi commands - * * light LEDs - * - * This is repeatedly called as fast as possible. + * Any detected changes in state are sent out as part of the processing */ -void keyboard_task(void) { +bool matrix_scan_task(void) { static matrix_row_t matrix_prev[MATRIX_ROWS]; - static uint8_t led_status = 0; matrix_row_t matrix_row = 0; matrix_row_t matrix_change = 0; #ifdef QMK_KEYS_PER_SCAN uint8_t keys_processed = 0; #endif -#ifdef ENCODER_ENABLE - bool encoders_changed = false; -#endif uint8_t matrix_changed = matrix_scan(); if (matrix_changed) last_matrix_activity_trigger(); @@ -431,9 +446,24 @@ void keyboard_task(void) { MATRIX_LOOP_END: -#ifdef DEBUG_MATRIX_SCAN_RATE matrix_scan_perf_task(); -#endif + return matrix_changed; +} + +/** \brief Keyboard task: Do keyboard routine jobs + * + * Do routine keyboard jobs: + * + * * scan matrix + * * handle mouse movements + * * handle midi commands + * * light LEDs + * + * This is repeatedly called as fast as possible. + */ +void keyboard_task(void) { + bool matrix_changed = matrix_scan_task(); + (void)matrix_changed; #if defined(RGBLIGHT_ENABLE) rgblight_task(); @@ -453,7 +483,7 @@ MATRIX_LOOP_END: #endif #ifdef ENCODER_ENABLE - encoders_changed = encoder_read(); + bool encoders_changed = encoder_read(); if (encoders_changed) last_encoder_activity_trigger(); #endif @@ -516,22 +546,5 @@ MATRIX_LOOP_END: programmable_button_send(); #endif - // update LED - if (led_status != host_keyboard_leds()) { - led_status = host_keyboard_leds(); - keyboard_set_leds(led_status); - } -} - -/** \brief keyboard set leds - * - * FIXME: needs doc - */ -void keyboard_set_leds(uint8_t leds) { - if (debug_keyboard) { - debug("keyboard_set_led: "); - debug_hex8(leds); - debug("\n"); - } - led_set(leds); + led_task(); } diff --git a/quantum/led_matrix/led_matrix.h b/quantum/led_matrix/led_matrix.h index e42be64661..cb7526d6e0 100644 --- a/quantum/led_matrix/led_matrix.h +++ b/quantum/led_matrix/led_matrix.h @@ -2,6 +2,7 @@ * Copyright 2017 Jack Humbert * Copyright 2018 Yiancar * Copyright 2019 Clueboard + * Copyright 2021 Leo Deng * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,6 +28,9 @@ #ifdef IS31FL3731 # include "is31fl3731-simple.h" #endif +#ifdef IS31FL3733 +# include "is31fl3733-simple.h" +#endif #ifndef LED_MATRIX_LED_FLUSH_LIMIT # define LED_MATRIX_LED_FLUSH_LIMIT 16 diff --git a/quantum/matrix.c b/quantum/matrix.c index 483d518ecc..a58cc752fb 100644 --- a/quantum/matrix.c +++ b/quantum/matrix.c @@ -63,17 +63,13 @@ extern matrix_row_t matrix[MATRIX_ROWS]; // debounced values #ifdef SPLIT_KEYBOARD // row offsets for each hand -uint8_t thisHand, thatHand; +extern uint8_t thisHand, thatHand; #endif // user-defined overridable functions __attribute__((weak)) void matrix_init_pins(void); __attribute__((weak)) void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); __attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col, matrix_row_t row_shifter); -#ifdef SPLIT_KEYBOARD -__attribute__((weak)) void matrix_slave_scan_kb(void) { matrix_slave_scan_user(); } -__attribute__((weak)) void matrix_slave_scan_user(void) {} -#endif static inline void setPinOutput_writeLow(pin_t pin) { ATOMIC_BLOCK_FORCEON { @@ -308,35 +304,6 @@ __attribute__((weak)) bool transport_master_if_connected(matrix_row_t master_mat transport_master(master_matrix, slave_matrix); return true; // Treat the transport as always connected } - -bool matrix_post_scan(void) { - bool changed = false; - if (is_keyboard_master()) { - static bool last_connected = false; - matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; - if (transport_master_if_connected(matrix + thisHand, slave_matrix)) { - changed = memcmp(matrix + thatHand, slave_matrix, sizeof(slave_matrix)) != 0; - - last_connected = true; - } else if (last_connected) { - // reset other half when disconnected - memset(slave_matrix, 0, sizeof(slave_matrix)); - changed = true; - - last_connected = false; - } - - if (changed) memcpy(matrix + thatHand, slave_matrix, sizeof(slave_matrix)); - - matrix_scan_quantum(); - } else { - transport_slave(matrix + thatHand, matrix + thisHand); - - matrix_slave_scan_kb(); - } - - return changed; -} #endif uint8_t matrix_scan(void) { diff --git a/quantum/matrix.h b/quantum/matrix.h index 5c696622fc..d968efeb0f 100644 --- a/quantum/matrix.h +++ b/quantum/matrix.h @@ -46,8 +46,6 @@ void matrix_setup(void); void matrix_init(void); /* scan all key states on matrix */ uint8_t matrix_scan(void); -/* whether modified from previous scan. used after matrix_scan. */ -bool matrix_is_modified(void) __attribute__((deprecated)); /* whether a switch is on */ bool matrix_is_on(uint8_t row, uint8_t col); /* matrix state on row */ @@ -75,6 +73,7 @@ void matrix_init_user(void); void matrix_scan_user(void); #ifdef SPLIT_KEYBOARD +bool matrix_post_scan(void); void matrix_slave_scan_kb(void); void matrix_slave_scan_user(void); #endif diff --git a/quantum/matrix_common.c b/quantum/matrix_common.c index 66c89970b1..98b83ddcf6 100644 --- a/quantum/matrix_common.c +++ b/quantum/matrix_common.c @@ -4,6 +4,15 @@ #include "wait.h" #include "print.h" #include "debug.h" +#ifdef SPLIT_KEYBOARD +# include "split_common/split_util.h" +# include "split_common/transactions.h" +# include <string.h> + +# define ROWS_PER_HAND (MATRIX_ROWS / 2) +#else +# define ROWS_PER_HAND (MATRIX_ROWS) +#endif #ifndef MATRIX_IO_DELAY # define MATRIX_IO_DELAY 30 @@ -13,6 +22,11 @@ matrix_row_t raw_matrix[MATRIX_ROWS]; matrix_row_t matrix[MATRIX_ROWS]; +#ifdef SPLIT_KEYBOARD +// row offsets for each hand +uint8_t thisHand, thatHand; +#endif + #ifdef MATRIX_MASKED extern const matrix_row_t matrix_mask[]; #endif @@ -45,12 +59,6 @@ inline matrix_row_t matrix_get_row(uint8_t row) { #endif } -// Deprecated. -bool matrix_is_modified(void) { - if (debounce_active()) return false; - return true; -} - #if (MATRIX_COLS <= 8) # define print_matrix_header() print("\nr/c 01234567\n") # define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) @@ -84,18 +92,59 @@ uint8_t matrix_key_count(void) { return count; } +#ifdef SPLIT_KEYBOARD +bool matrix_post_scan(void) { + bool changed = false; + if (is_keyboard_master()) { + static bool last_connected = false; + matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; + if (transport_master_if_connected(matrix + thisHand, slave_matrix)) { + changed = memcmp(matrix + thatHand, slave_matrix, sizeof(slave_matrix)) != 0; + + last_connected = true; + } else if (last_connected) { + // reset other half when disconnected + memset(slave_matrix, 0, sizeof(slave_matrix)); + changed = true; + + last_connected = false; + } + + if (changed) memcpy(matrix + thatHand, slave_matrix, sizeof(slave_matrix)); + + matrix_scan_quantum(); + } else { + transport_slave(matrix + thatHand, matrix + thisHand); + + matrix_slave_scan_kb(); + } + + return changed; +} +#endif + /*　`matrix_io_delay ()` exists for backwards compatibility. From now on, use matrix_output_unselect_delay().　*/ __attribute__((weak)) void matrix_io_delay(void) { wait_us(MATRIX_IO_DELAY); } - __attribute__((weak)) void matrix_output_select_delay(void) { waitInputPinDelay(); } __attribute__((weak)) void matrix_output_unselect_delay(uint8_t line, bool key_pressed) { matrix_io_delay(); } // CUSTOM MATRIX 'LITE' __attribute__((weak)) void matrix_init_custom(void) {} - __attribute__((weak)) bool matrix_scan_custom(matrix_row_t current_matrix[]) { return true; } +#ifdef SPLIT_KEYBOARD +__attribute__((weak)) void matrix_slave_scan_kb(void) { matrix_slave_scan_user(); } +__attribute__((weak)) void matrix_slave_scan_user(void) {} +#endif + __attribute__((weak)) void matrix_init(void) { +#ifdef SPLIT_KEYBOARD + split_pre_init(); + + thisHand = isLeftHand ? 0 : (ROWS_PER_HAND); + thatHand = ROWS_PER_HAND - thisHand; +#endif + matrix_init_custom(); // initialize matrix state: all keys off @@ -104,17 +153,26 @@ __attribute__((weak)) void matrix_init(void) { matrix[i] = 0; } - debounce_init(MATRIX_ROWS); + debounce_init(ROWS_PER_HAND); matrix_init_quantum(); + +#ifdef SPLIT_KEYBOARD + split_post_init(); +#endif } __attribute__((weak)) uint8_t matrix_scan(void) { bool changed = matrix_scan_custom(raw_matrix); - debounce(raw_matrix, matrix, MATRIX_ROWS, changed); - +#ifdef SPLIT_KEYBOARD + debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); + changed = (changed || matrix_post_scan()); +#else + debounce(raw_matrix, matrix, ROWS_PER_HAND, changed); matrix_scan_quantum(); +#endif + return changed; } diff --git a/quantum/pointing_device.c b/quantum/pointing_device.c index 2fefdb67b6..23d93fa15f 100644 --- a/quantum/pointing_device.c +++ b/quantum/pointing_device.c @@ -18,24 +18,105 @@ #include "pointing_device.h" #include <string.h> +#include "timer.h" #ifdef MOUSEKEY_ENABLE # include "mousekey.h" #endif #if (defined(POINTING_DEVICE_ROTATION_90) + defined(POINTING_DEVICE_ROTATION_180) + defined(POINTING_DEVICE_ROTATION_270)) > 1 # error More than one rotation selected. This is not supported. #endif +#if defined(SPLIT_POINTING_ENABLE) +# include "transactions.h" +# include "keyboard.h" -static report_mouse_t mouseReport = {}; +report_mouse_t shared_mouse_report = {}; +uint16_t shared_cpi = 0; + +/** + * @brief Sets the shared mouse report used be pointing device task + * + * NOTE : Only available when using SPLIT_POINTING_ENABLE + * + * @param[in] new_mouse_report report_mouse_t + */ +void pointing_device_set_shared_report(report_mouse_t new_mouse_report) { shared_mouse_report = new_mouse_report; } + +/** + * @brief Gets current pointing device CPI if supported + * + * Gets current cpi of the shared report and returns it as uint16_t + * + * NOTE : Only available when using SPLIT_POINTING_ENABLE + * + * @return cpi value as uint16_t + */ +uint16_t pointing_device_get_shared_cpi(void) { return shared_cpi; } + +# if defined(POINTING_DEVICE_LEFT) +# define POINTING_DEVICE_THIS_SIDE is_keyboard_left() +# elif defined(POINTING_DEVICE_RIGHT) +# define POINTING_DEVICE_THIS_SIDE !is_keyboard_left() +# elif defined(POINTING_DEVICE_COMBINED) +# define POINTING_DEVICE_THIS_SIDE true +# endif + +#endif // defined(SPLIT_POINTING_ENABLE) + +static report_mouse_t local_mouse_report = {}; extern const pointing_device_driver_t pointing_device_driver; +/** + * @brief Compares 2 mouse reports for difference and returns result + * + * @param[in] new report_mouse_t + * @param[in] old report_mouse_t + * @return bool result + */ __attribute__((weak)) bool has_mouse_report_changed(report_mouse_t new, report_mouse_t old) { return memcmp(&new, &old, sizeof(new)); } -__attribute__((weak)) void pointing_device_init_kb(void) {} -__attribute__((weak)) void pointing_device_init_user(void) {} +/** + * @brief Keyboard level code pointing device initialisation + * + */ +__attribute__((weak)) void pointing_device_init_kb(void) {} + +/** + * @brief User level code pointing device initialisation + * + */ +__attribute__((weak)) void pointing_device_init_user(void) {} + +/** + * @brief Weak function allowing for keyboard level mouse report modification + * + * Takes report_mouse_t struct allowing modification at keyboard level then returns report_mouse_t. + * + * @param[in] mouse_report report_mouse_t + * @return report_mouse_t + */ __attribute__((weak)) report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { return pointing_device_task_user(mouse_report); } + +/** + * @brief Weak function allowing for user level mouse report modification + * + * Takes report_mouse_t struct allowing modification at user level then returns report_mouse_t. + * + * @param[in] mouse_report report_mouse_t + * @return report_mouse_t + */ __attribute__((weak)) report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { return mouse_report; } +/** + * @brief Handles pointing device buttons + * + * Returns modified button bitmask using bool pressed and selected pointing_device_buttons_t button in uint8_t buttons bitmask. + * + * @param buttons[in] uint8_t bitmask + * @param pressed[in] bool + * @param button[in] pointing_device_buttons_t value + * @return Modified uint8_t bitmask buttons + */ __attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button) { if (pressed) { buttons |= 1 << (button); @@ -45,7 +126,17 @@ __attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bo return buttons; } +/** + * @brief Initialises pointing device + * + * Initialises pointing device, perform driver init and optional keyboard/user level code. + */ __attribute__((weak)) void pointing_device_init(void) { +#if defined(SPLIT_POINTING_ENABLE) + if (!(POINTING_DEVICE_THIS_SIDE)) { + return; + } +#endif pointing_device_driver.init(); #ifdef POINTING_DEVICE_MOTION_PIN setPinInputHigh(POINTING_DEVICE_MOTION_PIN); @@ -54,67 +145,299 @@ __attribute__((weak)) void pointing_device_init(void) { pointing_device_init_user(); } +/** + * @brief Sends processed mouse report to host + * + * This sends the mouse report generated by pointing_device_task if changed since the last report. Once send zeros mouse report except buttons. + * + */ __attribute__((weak)) void pointing_device_send(void) { static report_mouse_t old_report = {}; // If you need to do other things, like debugging, this is the place to do it. - if (has_mouse_report_changed(mouseReport, old_report)) { - host_mouse_send(&mouseReport); + if (has_mouse_report_changed(local_mouse_report, old_report)) { + host_mouse_send(&local_mouse_report); } // send it and 0 it out except for buttons, so those stay until they are explicity over-ridden using update_pointing_device - mouseReport.x = 0; - mouseReport.y = 0; - mouseReport.v = 0; - mouseReport.h = 0; + local_mouse_report.x = 0; + local_mouse_report.y = 0; + local_mouse_report.v = 0; + local_mouse_report.h = 0; - memcpy(&old_report, &mouseReport, sizeof(mouseReport)); + memcpy(&old_report, &local_mouse_report, sizeof(local_mouse_report)); } -__attribute__((weak)) void pointing_device_task(void) { - // Gather report info -#ifdef POINTING_DEVICE_MOTION_PIN - if (!readPin(POINTING_DEVICE_MOTION_PIN)) -#endif - mouseReport = pointing_device_driver.get_report(mouseReport); - - // Support rotation of the sensor data +/** + * @brief Adjust mouse report by any optional common pointing configuration defines + * + * This applies rotation or inversion to the mouse report as selected by the pointing device common configuration defines. + * + * @param mouse_report[in] takes a report_mouse_t to be adjusted + * @return report_mouse_t with adjusted values + */ +report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report) { + // Support rotation of the sensor data #if defined(POINTING_DEVICE_ROTATION_90) || defined(POINTING_DEVICE_ROTATION_180) || defined(POINTING_DEVICE_ROTATION_270) - int8_t x = mouseReport.x, y = mouseReport.y; + int8_t x = mouse_report.x, y = mouse_report.y; # if defined(POINTING_DEVICE_ROTATION_90) - mouseReport.x = y; - mouseReport.y = -x; + mouse_report.x = y; + mouse_report.y = -x; # elif defined(POINTING_DEVICE_ROTATION_180) - mouseReport.x = -x; - mouseReport.y = -y; + mouse_report.x = -x; + mouse_report.y = -y; # elif defined(POINTING_DEVICE_ROTATION_270) - mouseReport.x = -y; - mouseReport.y = x; + mouse_report.x = -y; + mouse_report.y = x; # else # error "How the heck did you get here?!" # endif #endif // Support Inverting the X and Y Axises #if defined(POINTING_DEVICE_INVERT_X) - mouseReport.x = -mouseReport.x; + mouse_report.x = -mouse_report.x; #endif #if defined(POINTING_DEVICE_INVERT_Y) - mouseReport.y = -mouseReport.y; + mouse_report.y = -mouse_report.y; +#endif + return mouse_report; +} + +/** + * @brief Retrieves and processes pointing device data. + * + * This function is part of the keyboard loop and retrieves the mouse report from the pointing device driver. + * It applies any optional configuration e.g. rotation or axis inversion and then initiates a send. + * + */ +__attribute__((weak)) void pointing_device_task(void) { +#if defined(SPLIT_POINTING_ENABLE) + // Don't poll the target side pointing device. + if (!is_keyboard_master()) { + return; + }; +#endif + +#if defined(POINTING_DEVICE_TASK_THROTTLE_MS) + static uint32_t last_exec = 0; + if (timer_elapsed32(last_exec) < POINTING_DEVICE_TASK_THROTTLE_MS) { + return; + } + last_exec = timer_read32(); +#else +# if defined(SPLIT_POINTING_ENABLE) +# pragma message("It's recommended you enable a throttle when sharing pointing devices.") +# endif +#endif + + // Gather report info +#ifdef POINTING_DEVICE_MOTION_PIN +# if defined(SPLIT_POINTING_ENABLE) +# error POINTING_DEVICE_MOTION_PIN not supported when sharing the pointing device report between sides. +# endif + if (!readPin(POINTING_DEVICE_MOTION_PIN)) #endif +#if defined(SPLIT_POINTING_ENABLE) +# if defined(POINTING_DEVICE_COMBINED) + static uint8_t old_buttons = 0; + local_mouse_report.buttons = old_buttons; + local_mouse_report = pointing_device_driver.get_report(local_mouse_report); + old_buttons = local_mouse_report.buttons; +# elif defined(POINTING_DEVICE_LEFT) || defined(POINTING_DEVICE_RIGHT) + local_mouse_report = POINTING_DEVICE_THIS_SIDE ? pointing_device_driver.get_report(local_mouse_report) : shared_mouse_report; +# else +# error "You need to define the side(s) the pointing device is on. POINTING_DEVICE_COMBINED / POINTING_DEVICE_LEFT / POINTING_DEVICE_RIGHT" +# endif +#else + local_mouse_report = pointing_device_driver.get_report(local_mouse_report); +#endif // defined(SPLIT_POINTING_ENABLE) + // allow kb to intercept and modify report - mouseReport = pointing_device_task_kb(mouseReport); +#if defined(SPLIT_POINTING_ENABLE) && defined(POINTING_DEVICE_COMBINED) + if (is_keyboard_left()) { + local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report); + shared_mouse_report = pointing_device_adjust_by_defines_right(shared_mouse_report); + } else { + local_mouse_report = pointing_device_adjust_by_defines_right(local_mouse_report); + shared_mouse_report = pointing_device_adjust_by_defines(shared_mouse_report); + } + local_mouse_report = is_keyboard_left() ? pointing_device_task_combined_kb(local_mouse_report, shared_mouse_report) : pointing_device_task_combined_kb(shared_mouse_report, local_mouse_report); +#else + local_mouse_report = pointing_device_adjust_by_defines(local_mouse_report); + local_mouse_report = pointing_device_task_kb(local_mouse_report); +#endif // combine with mouse report to ensure that the combined is sent correctly #ifdef MOUSEKEY_ENABLE report_mouse_t mousekey_report = mousekey_get_report(); - mouseReport.buttons = mouseReport.buttons | mousekey_report.buttons; + local_mouse_report.buttons = local_mouse_report.buttons | mousekey_report.buttons; #endif pointing_device_send(); } -report_mouse_t pointing_device_get_report(void) { return mouseReport; } +/** + * @brief Gets current mouse report used by pointing device task + * + * @return report_mouse_t + */ +report_mouse_t pointing_device_get_report(void) { return local_mouse_report; } + +/** + * @brief Sets mouse report used be pointing device task + * + * @param[in] new_mouse_report + */ +void pointing_device_set_report(report_mouse_t new_mouse_report) { local_mouse_report = new_mouse_report; } + +/** + * @brief Gets current pointing device CPI if supported + * + * Gets current cpi from pointing device driver if supported and returns it as uint16_t + * + * @return cpi value as uint16_t + */ +uint16_t pointing_device_get_cpi(void) { +#if defined(SPLIT_POINTING_ENABLE) + return POINTING_DEVICE_THIS_SIDE ? pointing_device_driver.get_cpi() : shared_cpi; +#else + return pointing_device_driver.get_cpi(); +#endif +} -void pointing_device_set_report(report_mouse_t newMouseReport) { mouseReport = newMouseReport; } +/** + * @brief Set pointing device CPI if supported + * + * Takes a uint16_t value to set pointing device cpi if supported by driver. + * + * @param[in] cpi uint16_t value. + */ +void pointing_device_set_cpi(uint16_t cpi) { +#if defined(SPLIT_POINTING_ENABLE) + if (POINTING_DEVICE_THIS_SIDE) { + pointing_device_driver.set_cpi(cpi); + } else { + shared_cpi = cpi; + } +#else + pointing_device_driver.set_cpi(cpi); +#endif +} -uint16_t pointing_device_get_cpi(void) { return pointing_device_driver.get_cpi(); } +#if defined(SPLIT_POINTING_ENABLE) && defined(POINTING_DEVICE_COMBINED) +/** + * @brief Set pointing device CPI if supported + * + * Takes a bool and uint16_t and allows setting cpi for a single side when using 2 pointing devices with a split keyboard. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left true = left, false = right. + * @param[in] cpi uint16_t value. + */ +void pointing_device_set_cpi_on_side(bool left, uint16_t cpi) { + bool local = (is_keyboard_left() & left) ? true : false; + if (local) { + pointing_device_driver.set_cpi(cpi); + } else { + shared_cpi = cpi; + } +} -void pointing_device_set_cpi(uint16_t cpi) { pointing_device_driver.set_cpi(cpi); } +/** + * @brief clamps int16_t to int8_t + * + * @param[in] int16_t value + * @return int8_t clamped value + */ +static inline int8_t pointing_device_movement_clamp(int16_t value) { + if (value < INT8_MIN) { + return INT8_MIN; + } else if (value > INT8_MAX) { + return INT8_MAX; + } else { + return value; + } +} + +/** + * @brief combines 2 mouse reports and returns 2 + * + * Combines 2 report_mouse_t structs, clamping movement values to int8_t and ignores report_id then returns the resulting report_mouse_t struct. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report left report_mouse_t + * @param[in] right_report right report_mouse_t + * @return combined report_mouse_t of left_report and right_report + */ +report_mouse_t pointing_device_combine_reports(report_mouse_t left_report, report_mouse_t right_report) { + left_report.x = pointing_device_movement_clamp((int16_t)left_report.x + right_report.x); + left_report.y = pointing_device_movement_clamp((int16_t)left_report.y + right_report.y); + left_report.h = pointing_device_movement_clamp((int16_t)left_report.h + right_report.h); + left_report.v = pointing_device_movement_clamp((int16_t)left_report.v + right_report.v); + left_report.buttons |= right_report.buttons; + return left_report; +} + +/** + * @brief Adjust mouse report by any optional right pointing configuration defines + * + * This applies rotation or inversion to the mouse report as selected by the pointing device common configuration defines. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] mouse_report report_mouse_t to be adjusted + * @return report_mouse_t with adjusted values + */ +report_mouse_t pointing_device_adjust_by_defines_right(report_mouse_t mouse_report) { + // Support rotation of the sensor data +# if defined(POINTING_DEVICE_ROTATION_90_RIGHT) || defined(POINTING_DEVICE_ROTATION_RIGHT) || defined(POINTING_DEVICE_ROTATION_RIGHT) + int8_t x = mouse_report.x, y = mouse_report.y; +# if defined(POINTING_DEVICE_ROTATION_90_RIGHT) + mouse_report.x = y; + mouse_report.y = -x; +# elif defined(POINTING_DEVICE_ROTATION_180_RIGHT) + mouse_report.x = -x; + mouse_report.y = -y; +# elif defined(POINTING_DEVICE_ROTATION_270_RIGHT) + mouse_report.x = -y; + mouse_report.y = x; +# else +# error "How the heck did you get here?!" +# endif +# endif + // Support Inverting the X and Y Axises +# if defined(POINTING_DEVICE_INVERT_X_RIGHT) + mouse_report.x = -mouse_report.x; +# endif +# if defined(POINTING_DEVICE_INVERT_Y_RIGHT) + mouse_report.y = -mouse_report.y; +# endif + return mouse_report; +} + +/** + * @brief Weak function allowing for keyboard level mouse report modification + * + * Takes 2 report_mouse_t structs allowing individual modification of sides at keyboard level then returns pointing_device_task_combined_user. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report report_mouse_t + * @param[in] right_report report_mouse_t + * @return pointing_device_task_combined_user(left_report, right_report) by default + */ +__attribute__((weak)) report_mouse_t pointing_device_task_combined_kb(report_mouse_t left_report, report_mouse_t right_report) { return pointing_device_task_combined_user(left_report, right_report); } + +/** + * @brief Weak function allowing for user level mouse report modification + * + * Takes 2 report_mouse_t structs allowing individual modification of sides at user level then returns pointing_device_combine_reports. + * + * NOTE: Only available when using SPLIT_POINTING_ENABLE and POINTING_DEVICE_COMBINED + * + * @param[in] left_report report_mouse_t + * @param[in] right_report report_mouse_t + * @return pointing_device_combine_reports(left_report, right_report) by default + */ +__attribute__((weak)) report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report) { return pointing_device_combine_reports(left_report, right_report); } +#endif diff --git a/quantum/pointing_device.h b/quantum/pointing_device.h index 5106c26660..00229e8a24 100644 --- a/quantum/pointing_device.h +++ b/quantum/pointing_device.h @@ -86,3 +86,16 @@ void pointing_device_init_user(void); report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report); report_mouse_t pointing_device_task_user(report_mouse_t mouse_report); uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button); +report_mouse_t pointing_device_adjust_by_defines(report_mouse_t mouse_report); + +#if defined(SPLIT_POINTING_ENABLE) +void pointing_device_set_shared_report(report_mouse_t report); +uint16_t pointing_device_get_shared_cpi(void); +# if defined(POINTING_DEVICE_COMBINED) +void pointing_device_set_cpi_on_side(bool left, uint16_t cpi); +report_mouse_t pointing_device_combine_reports(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_task_combined_kb(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_task_combined_user(report_mouse_t left_report, report_mouse_t right_report); +report_mouse_t pointing_device_adjust_by_defines_right(report_mouse_t mouse_report); +# endif // defined(POINTING_DEVICE_COMBINED) +#endif // defined(SPLIT_POINTING_ENABLE) diff --git a/quantum/pointing_device_drivers.c b/quantum/pointing_device_drivers.c index 9ad5e76ba6..260a6d2eb4 100644 --- a/quantum/pointing_device_drivers.c +++ b/quantum/pointing_device_drivers.c @@ -165,14 +165,13 @@ const pointing_device_driver_t pointing_device_driver = { // clang-format on #elif defined(POINTING_DEVICE_DRIVER_pimoroni_trackball) -report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) { - static fast_timer_t throttle = 0; - static uint16_t debounce = 0; - static uint8_t error_count = 0; - pimoroni_data_t pimoroni_data = {0}; - static int16_t x_offset = 0, y_offset = 0; - - if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT && timer_elapsed_fast(throttle) >= PIMORONI_TRACKBALL_INTERVAL_MS) { +report_mouse_t pimoroni_trackball_get_report(report_mouse_t mouse_report) { + static uint16_t debounce = 0; + static uint8_t error_count = 0; + pimoroni_data_t pimoroni_data = {0}; + static int16_t x_offset = 0, y_offset = 0; + + if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT) { i2c_status_t status = read_pimoroni_trackball(&pimoroni_data); if (status == I2C_STATUS_SUCCESS) { @@ -195,22 +194,20 @@ report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) { } else { error_count++; } - throttle = timer_read_fast(); } return mouse_report; } // clang-format off const pointing_device_driver_t pointing_device_driver = { - .init = pimironi_trackball_device_init, - .get_report = pimorono_trackball_get_report, - .set_cpi = NULL, - .get_cpi = NULL + .init = pimoroni_trackball_device_init, + .get_report = pimoroni_trackball_get_report, + .set_cpi = pimoroni_trackball_set_cpi, + .get_cpi = pimoroni_trackball_get_cpi }; // clang-format on #elif defined(POINTING_DEVICE_DRIVER_pmw3360) - -static void init(void) { pmw3360_init(); } +static void pmw3360_device_init(void) { pmw3360_init(); } report_mouse_t pmw3360_get_report(report_mouse_t mouse_report) { report_pmw3360_t data = pmw3360_read_burst(); @@ -239,7 +236,7 @@ report_mouse_t pmw3360_get_report(report_mouse_t mouse_report) { // clang-format off const pointing_device_driver_t pointing_device_driver = { - .init = init, + .init = pmw3360_device_init, .get_report = pmw3360_get_report, .set_cpi = pmw3360_set_cpi, .get_cpi = pmw3360_get_cpi diff --git a/quantum/process_keycode/process_audio.c b/quantum/process_keycode/process_audio.c index 3b5fa8490b..23664721e8 100644 --- a/quantum/process_keycode/process_audio.c +++ b/quantum/process_keycode/process_audio.c @@ -57,3 +57,4 @@ void process_audio_noteoff(uint8_t note) { stop_note(compute_freq_for_midi_note( void process_audio_all_notes_off(void) { stop_all_notes(); } __attribute__((weak)) void audio_on_user() {} +__attribute__((weak)) void audio_off_user() {} diff --git a/quantum/process_keycode/process_audio.h b/quantum/process_keycode/process_audio.h index d89a834ea8..42cfab4af2 100644 --- a/quantum/process_keycode/process_audio.h +++ b/quantum/process_keycode/process_audio.h @@ -8,3 +8,4 @@ void process_audio_noteoff(uint8_t note); void process_audio_all_notes_off(void); void audio_on_user(void); +void audio_off_user(void); diff --git a/quantum/process_keycode/process_combo.c b/quantum/process_keycode/process_combo.c index a050161edf..8040ede528 100644 --- a/quantum/process_keycode/process_combo.c +++ b/quantum/process_keycode/process_combo.c @@ -40,10 +40,18 @@ __attribute__((weak)) bool get_combo_must_tap(uint16_t index, combo_t *combo) { __attribute__((weak)) uint16_t get_combo_term(uint16_t index, combo_t *combo) { return COMBO_TERM; } #endif +#ifdef COMBO_MUST_PRESS_IN_ORDER_PER_COMBO +__attribute__((weak)) bool get_combo_must_press_in_order(uint16_t combo_index, combo_t *combo) { return true; } +#endif + #ifdef COMBO_PROCESS_KEY_RELEASE __attribute__((weak)) bool process_combo_key_release(uint16_t combo_index, combo_t *combo, uint8_t key_index, uint16_t keycode) { return false; } #endif +#ifdef COMBO_SHOULD_TRIGGER +__attribute__((weak)) bool combo_should_trigger(uint16_t combo_index, combo_t *combo, uint16_t keycode, keyrecord_t *record) { return true; } +#endif + #ifndef COMBO_NO_TIMER static uint16_t timer = 0; #endif @@ -350,6 +358,28 @@ combo_t *overlaps(combo_t *combo1, combo_t *combo2) { return combo1; } +#if defined(COMBO_MUST_PRESS_IN_ORDER) || defined(COMBO_MUST_PRESS_IN_ORDER_PER_COMBO) +static bool keys_pressed_in_order(uint16_t combo_index, combo_t *combo, uint16_t key_index, uint16_t keycode, keyrecord_t *record) { +# ifdef COMBO_MUST_PRESS_IN_ORDER_PER_COMBO + if (!get_combo_must_press_in_order(combo_index, combo)) { + return true; + } +# endif + if ( + // The `state` bit for the key being pressed. + (1 << key_index) == + // The *next* combo key's bit. + (COMBO_STATE(combo) + 1) + // E.g. two keys already pressed: `state == 11`. + // Next possible `state` is `111`. + // So the needed bit is `100` which we get with `11 + 1`. + ) { + return true; + } + return false; +} +#endif + static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t *record, uint16_t combo_index) { uint8_t key_count = 0; uint16_t key_index = -1; @@ -360,7 +390,14 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * return false; } - bool key_is_part_of_combo = !COMBO_DISABLED(combo) && is_combo_enabled(); + bool key_is_part_of_combo = (!COMBO_DISABLED(combo) && is_combo_enabled() +#if defined(COMBO_MUST_PRESS_IN_ORDER) || defined(COMBO_MUST_PRESS_IN_ORDER_PER_COMBO) + && keys_pressed_in_order(combo_index, combo, key_index, keycode, record) +#endif +#ifdef COMBO_SHOULD_TRIGGER + && combo_should_trigger(combo_index, combo, keycode, record) +#endif + ); if (record->event.pressed && key_is_part_of_combo) { uint16_t time = _get_combo_term(combo_index, combo); diff --git a/quantum/process_keycode/process_key_lock.c b/quantum/process_keycode/process_key_lock.c index 4bd58f0c1e..941a2c5780 100644 --- a/quantum/process_keycode/process_key_lock.c +++ b/quantum/process_keycode/process_key_lock.c @@ -56,6 +56,11 @@ static inline uint16_t translate_keycode(uint16_t keycode) { } } +void cancel_key_lock(void) { + watching = false; + UNSET_KEY_STATE(0x0); +} + bool process_key_lock(uint16_t *keycode, keyrecord_t *record) { // We start by categorizing the keypress event. In the event of a down // event, there are several possibilities: diff --git a/quantum/process_keycode/process_key_lock.h b/quantum/process_keycode/process_key_lock.h index baa0b39077..5159b0ba02 100644 --- a/quantum/process_keycode/process_key_lock.h +++ b/quantum/process_keycode/process_key_lock.h @@ -18,4 +18,5 @@ #include "quantum.h" +void cancel_key_lock(void); bool process_key_lock(uint16_t *keycode, keyrecord_t *record); diff --git a/quantum/process_keycode/process_magic.c b/quantum/process_keycode/process_magic.c index d5cff4f12a..6332be647c 100644 --- a/quantum/process_keycode/process_magic.c +++ b/quantum/process_keycode/process_magic.c @@ -44,6 +44,7 @@ bool process_magic(uint16_t keycode, keyrecord_t *record) { case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_ALT_GUI: case MAGIC_SWAP_LCTL_LGUI ... MAGIC_EE_HANDS_RIGHT: case MAGIC_TOGGLE_GUI: + case MAGIC_TOGGLE_CONTROL_CAPSLOCK: /* keymap config */ keymap_config.raw = eeconfig_read_keymap(); switch (keycode) { @@ -168,6 +169,9 @@ bool process_magic(uint16_t keycode, keyrecord_t *record) { case MAGIC_TOGGLE_GUI: keymap_config.no_gui = !keymap_config.no_gui; break; + case MAGIC_TOGGLE_CONTROL_CAPSLOCK: + keymap_config.swap_control_capslock = !keymap_config.swap_control_capslock; + break; } eeconfig_update_keymap(keymap_config.raw); diff --git a/quantum/process_keycode/process_printer.c b/quantum/process_keycode/process_printer.c index 82528cc680..0801f078ef 100644 --- a/quantum/process_keycode/process_printer.c +++ b/quantum/process_keycode/process_printer.c @@ -16,13 +16,14 @@ #include "process_printer.h" #include "action_util.h" +#include "uart.h" bool printing_enabled = false; uint8_t character_shift = 0; void enable_printing(void) { printing_enabled = true; - serial_init(); + uart_init(19200); } void disable_printing(void) { printing_enabled = false; } @@ -35,7 +36,7 @@ uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0 void print_char(char c) { USB_Disable(); - serial_send(c); + uart_write(c); USB_Init(); } diff --git a/quantum/process_keycode/process_printer.h b/quantum/process_keycode/process_printer.h index 3c6d06ff94..6f4d09f333 100644 --- a/quantum/process_keycode/process_printer.h +++ b/quantum/process_keycode/process_printer.h @@ -18,6 +18,4 @@ #include "quantum.h" -#include "protocol/serial.h" - bool process_printer(uint16_t keycode, keyrecord_t *record); diff --git a/quantum/process_keycode/process_rgb.c b/quantum/process_keycode/process_rgb.c index 69853cd5c4..c805bd615d 100644 --- a/quantum/process_keycode/process_rgb.c +++ b/quantum/process_keycode/process_rgb.c @@ -51,12 +51,8 @@ static void __attribute__((noinline, unused)) handleKeycodeRGBMode(const uint8_t * Handle keycodes for both rgblight and rgbmatrix */ bool process_rgb(const uint16_t keycode, const keyrecord_t *record) { -#ifndef SPLIT_KEYBOARD - if (record->event.pressed) { -#else - // Split keyboards need to trigger on key-up for edge-case issue + // need to trigger on key-up for edge-case issue if (!record->event.pressed) { -#endif #if (defined(RGBLIGHT_ENABLE) && !defined(RGBLIGHT_DISABLE_KEYCODES)) || (defined(RGB_MATRIX_ENABLE) && !defined(RGB_MATRIX_DISABLE_KEYCODES)) uint8_t shifted = get_mods() & MOD_MASK_SHIFT; #endif diff --git a/quantum/quantum.c b/quantum/quantum.c index 35b6351e9d..c106f795d0 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -76,9 +76,9 @@ uint8_t extract_mod_bits(uint16_t code) { return mods_to_send; } -static void do_code16(uint16_t code, void (*f)(uint8_t)) { f(extract_mod_bits(code)); } +void do_code16(uint16_t code, void (*f)(uint8_t)) { f(extract_mod_bits(code)); } -void register_code16(uint16_t code) { +__attribute__((weak)) void register_code16(uint16_t code) { if (IS_MOD(code) || code == KC_NO) { do_code16(code, register_mods); } else { @@ -87,7 +87,7 @@ void register_code16(uint16_t code) { register_code(code); } -void unregister_code16(uint16_t code) { +__attribute__((weak)) void unregister_code16(uint16_t code) { unregister_code(code); if (IS_MOD(code) || code == KC_NO) { do_code16(code, unregister_mods); @@ -96,7 +96,7 @@ void unregister_code16(uint16_t code) { } } -void tap_code16(uint16_t code) { +__attribute__((weak)) void tap_code16(uint16_t code) { register_code16(code); #if TAP_CODE_DELAY > 0 wait_ms(TAP_CODE_DELAY); @@ -263,7 +263,7 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef TAP_DANCE_ENABLE process_tap_dance(keycode, record) && #endif -#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) +#if defined(UNICODE_COMMON_ENABLE) process_unicode_common(keycode, record) && #endif #ifdef LEADER_ENABLE @@ -387,7 +387,7 @@ void matrix_init_quantum() { #ifdef RGB_MATRIX_ENABLE rgb_matrix_init(); #endif -#if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE) +#if defined(UNICODE_COMMON_ENABLE) unicode_input_mode_init(); #endif #ifdef HAPTIC_ENABLE diff --git a/quantum/quantum.h b/quantum/quantum.h index 6927884e2f..5d3a665887 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -109,6 +109,10 @@ extern layer_state_t layer_state; # include "process_unicodemap.h" #endif +#ifdef UNICODE_COMMON_ENABLE +# include "process_unicode_common.h" +#endif + #ifdef KEY_OVERRIDE_ENABLE # include "process_key_override.h" #endif diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index e4d0167aac..3950a3bcae 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -597,6 +597,8 @@ enum quantum_keycodes { MACRO_30, MACRO_31, + MAGIC_TOGGLE_CONTROL_CAPSLOCK, + // Start of custom keycode range for keyboards and keymaps - always leave at the end SAFE_RANGE }; @@ -749,6 +751,7 @@ enum quantum_keycodes { #define CL_NORM MAGIC_UNSWAP_CONTROL_CAPSLOCK #define CL_CTRL MAGIC_CAPSLOCK_TO_CONTROL #define CL_CAPS MAGIC_UNCAPSLOCK_TO_CONTROL +#define CL_TOGG MAGIC_TOGGLE_CONTROL_CAPSLOCK #define LCG_SWP MAGIC_SWAP_LCTL_LGUI #define LCG_NRM MAGIC_UNSWAP_LCTL_LGUI diff --git a/quantum/split_common/split_util.h b/quantum/split_common/split_util.h index ef72043bb7..c7eabea233 100644 --- a/quantum/split_common/split_util.h +++ b/quantum/split_common/split_util.h @@ -2,7 +2,6 @@ #include <stdbool.h> #include <stdint.h> -#include <stdio.h> #include <stdlib.h> #include "matrix.h" diff --git a/quantum/split_common/transaction_id_define.h b/quantum/split_common/transaction_id_define.h index 535bc21aea..aa71c3621e 100644 --- a/quantum/split_common/transaction_id_define.h +++ b/quantum/split_common/transaction_id_define.h @@ -78,6 +78,12 @@ enum serial_transaction_id { PUT_ST7565, #endif // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE) +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + GET_POINTING_CHECKSUM, + GET_POINTING_DATA, + PUT_POINTING_CPI, +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) PUT_RPC_INFO, PUT_RPC_REQ_DATA, diff --git a/quantum/split_common/transactions.c b/quantum/split_common/transactions.c index 3ff87710e7..81f9836382 100644 --- a/quantum/split_common/transactions.c +++ b/quantum/split_common/transactions.c @@ -579,6 +579,84 @@ static void st7565_handlers_slave(matrix_row_t master_matrix[], matrix_row_t sla #endif // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE) //////////////////////////////////////////////////// +// POINTING + +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + +static bool pointing_handlers_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { +# if defined(POINTING_DEVICE_LEFT) + if (is_keyboard_left()) { + return true; + } +# elif defined(POINTING_DEVICE_RIGHT) + if (!is_keyboard_left()) { + return true; + } +# endif + static uint32_t last_update = 0; + static uint16_t last_cpi = 0; + report_mouse_t temp_state; + uint16_t temp_cpi; + bool okay = read_if_checksum_mismatch(GET_POINTING_CHECKSUM, GET_POINTING_DATA, &last_update, &temp_state, &split_shmem->pointing.report, sizeof(temp_state)); + if (okay) pointing_device_set_shared_report(temp_state); + temp_cpi = pointing_device_get_shared_cpi(); + if (temp_cpi && memcmp(&last_cpi, &temp_cpi, sizeof(temp_cpi)) != 0) { + memcpy(&split_shmem->pointing.cpi, &temp_cpi, sizeof(temp_cpi)); + okay = transport_write(PUT_POINTING_CPI, &split_shmem->pointing.cpi, sizeof(split_shmem->pointing.cpi)); + if (okay) { + last_cpi = temp_cpi; + } + } + return okay; +} + +extern const pointing_device_driver_t pointing_device_driver; + +static void pointing_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { +# if defined(POINTING_DEVICE_LEFT) + if (!is_keyboard_left()) { + return; + } +# elif defined(POINTING_DEVICE_RIGHT) + if (is_keyboard_left()) { + return; + } +# endif + report_mouse_t temp_report; + uint16_t temp_cpi; +# ifdef POINTING_DEVICE_TASK_THROTTLE_MS + static uint32_t last_exec = 0; + if (timer_elapsed32(last_exec) < POINTING_DEVICE_TASK_THROTTLE_MS) { + return; + } + last_exec = timer_read32(); +# endif + temp_cpi = !pointing_device_driver.get_cpi ? 0 : pointing_device_driver.get_cpi(); // check for NULL + if (split_shmem->pointing.cpi && memcmp(&split_shmem->pointing.cpi, &temp_cpi, sizeof(temp_cpi)) != 0) { + if (pointing_device_driver.set_cpi) { + pointing_device_driver.set_cpi(split_shmem->pointing.cpi); + } + } + memset(&temp_report, 0, sizeof(temp_report)); + temp_report = pointing_device_driver.get_report(temp_report); + memcpy(&split_shmem->pointing.report, &temp_report, sizeof(temp_report)); + // Now update the checksum given that the pointing has been written to + split_shmem->pointing.checksum = crc8(&temp_report, sizeof(temp_report)); +} + +# define TRANSACTIONS_POINTING_MASTER() TRANSACTION_HANDLER_MASTER(pointing) +# define TRANSACTIONS_POINTING_SLAVE() TRANSACTION_HANDLER_SLAVE(pointing) +# define TRANSACTIONS_POINTING_REGISTRATIONS [GET_POINTING_CHECKSUM] = trans_target2initiator_initializer(pointing.checksum), [GET_POINTING_DATA] = trans_target2initiator_initializer(pointing.report), [PUT_POINTING_CPI] = trans_initiator2target_initializer(pointing.cpi), + +#else // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + +# define TRANSACTIONS_POINTING_MASTER() +# define TRANSACTIONS_POINTING_SLAVE() +# define TRANSACTIONS_POINTING_REGISTRATIONS + +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + +//////////////////////////////////////////////////// uint8_t dummy; split_transaction_desc_t split_transaction_table[NUM_TOTAL_TRANSACTIONS] = { @@ -604,6 +682,7 @@ split_transaction_desc_t split_transaction_table[NUM_TOTAL_TRANSACTIONS] = { TRANSACTIONS_WPM_REGISTRATIONS TRANSACTIONS_OLED_REGISTRATIONS TRANSACTIONS_ST7565_REGISTRATIONS + TRANSACTIONS_POINTING_REGISTRATIONS // clang-format on #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) @@ -629,6 +708,7 @@ bool transactions_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix TRANSACTIONS_WPM_MASTER(); TRANSACTIONS_OLED_MASTER(); TRANSACTIONS_ST7565_MASTER(); + TRANSACTIONS_POINTING_MASTER(); return true; } @@ -647,6 +727,7 @@ void transactions_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[ TRANSACTIONS_WPM_SLAVE(); TRANSACTIONS_OLED_SLAVE(); TRANSACTIONS_ST7565_SLAVE(); + TRANSACTIONS_POINTING_SLAVE(); } #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) diff --git a/quantum/split_common/transport.h b/quantum/split_common/transport.h index 1d4f6ed0cd..31b804908b 100644 --- a/quantum/split_common/transport.h +++ b/quantum/split_common/transport.h @@ -106,6 +106,15 @@ typedef struct _split_mods_sync_t { } split_mods_sync_t; #endif // SPLIT_MODS_ENABLE +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) +# include "pointing_device.h" +typedef struct _split_slave_pointing_sync_t { + uint8_t checksum; + report_mouse_t report; + uint16_t cpi; +} split_slave_pointing_sync_t; +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) typedef struct _rpc_sync_info_t { int8_t transaction_id; @@ -173,6 +182,10 @@ typedef struct _split_shared_memory_t { uint8_t current_st7565_state; #endif // ST7565_ENABLE(OLED_ENABLE) && defined(SPLIT_ST7565_ENABLE) +#if defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + split_slave_pointing_sync_t pointing; +#endif // defined(POINTING_DEVICE_ENABLE) && defined(SPLIT_POINTING_ENABLE) + #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) rpc_sync_info_t rpc_info; uint8_t rpc_m2s_buffer[RPC_M2S_BUFFER_SIZE]; diff --git a/quantum/wpm.c b/quantum/wpm.c index 925e2c416e..62d4128b8e 100644 --- a/quantum/wpm.c +++ b/quantum/wpm.c @@ -22,33 +22,37 @@ // WPM Stuff static uint8_t current_wpm = 0; static uint32_t wpm_timer = 0; -#ifndef WPM_UNFILTERED -static uint32_t smoothing_timer = 0; -#endif /* The WPM calculation works by specifying a certain number of 'periods' inside * a ring buffer, and we count the number of keypresses which occur in each of * those periods. Then to calculate WPM, we add up all of the keypresses in * the whole ring buffer, divide by the number of keypresses in a 'word', and - * then adjust for how much time is captured by our ring buffer. Right now - * the ring buffer is hardcoded below to be six half-second periods, accounting - * for a total WPM sampling period of up to three seconds of typing. + * then adjust for how much time is captured by our ring buffer. The size + * of the ring buffer can be configured using the keymap configuration + * value `WPM_SAMPLE_PERIODS`. * - * Whenever our WPM drops to absolute zero due to no typing occurring within - * any contiguous three seconds, we reset and start measuring fresh, - * which lets our WPM immediately reach the correct value even before a full - * three second sampling buffer has been filled. */ #define MAX_PERIODS (WPM_SAMPLE_PERIODS) #define PERIOD_DURATION (1000 * WPM_SAMPLE_SECONDS / MAX_PERIODS) -#define LATENCY (100) -static int8_t period_presses[MAX_PERIODS] = {0}; + +static int16_t period_presses[MAX_PERIODS] = {0}; static uint8_t current_period = 0; static uint8_t periods = 1; #if !defined(WPM_UNFILTERED) -static uint8_t prev_wpm = 0; -static uint8_t next_wpm = 0; +/* LATENCY is used as part of filtering, and controls how quickly the reported + * WPM trails behind our actual instantaneous measured WPM value, and is + * defined in milliseconds. So for LATENCY == 100, the displayed WPM is + * smoothed out over periods of 0.1 seconds. This results in a nice, + * smoothly-moving reported WPM value which nevertheless is never more than + * 0.1 seconds behind the typist's actual current WPM. + * + * LATENCY is not used if WPM_UNFILTERED is defined. + */ +# define LATENCY (100) +static uint32_t smoothing_timer = 0; +static uint8_t prev_wpm = 0; +static uint8_t next_wpm = 0; #endif void set_current_wpm(uint8_t new_wpm) { current_wpm = new_wpm; } @@ -71,7 +75,7 @@ __attribute__((weak)) bool wpm_keycode_user(uint16_t keycode) { return false; } -#ifdef WPM_ALLOW_COUNT_REGRESSION +#if defined(WPM_ALLOW_COUNT_REGRESSION) __attribute__((weak)) uint8_t wpm_regress_count(uint16_t keycode) { bool weak_modded = (keycode >= QK_LCTL && keycode < QK_LSFT) || (keycode >= QK_RCTL && keycode < QK_RSFT); @@ -95,12 +99,12 @@ __attribute__((weak)) uint8_t wpm_regress_count(uint16_t keycode) { // Outside 'raw' mode we smooth results over time. void update_wpm(uint16_t keycode) { - if (wpm_keycode(keycode)) { + if (wpm_keycode(keycode) && period_presses[current_period] < INT16_MAX) { period_presses[current_period]++; } -#ifdef WPM_ALLOW_COUNT_REGRESSION +#if defined(WPM_ALLOW_COUNT_REGRESSION) uint8_t regress = wpm_regress_count(keycode); - if (regress) { + if (regress && period_presses[current_period] > INT16_MIN) { period_presses[current_period]--; } #endif @@ -116,32 +120,41 @@ void decay_wpm(void) { } int32_t elapsed = timer_elapsed32(wpm_timer); uint32_t duration = (((periods)*PERIOD_DURATION) + elapsed); - uint32_t wpm_now = (60000 * presses) / (duration * WPM_ESTIMATED_WORD_SIZE); - wpm_now = (wpm_now > 240) ? 240 : wpm_now; + int32_t wpm_now = (60000 * presses) / (duration * WPM_ESTIMATED_WORD_SIZE); + + if (wpm_now < 0) // set some reasonable WPM measurement limits + wpm_now = 0; + if (wpm_now > 240) wpm_now = 240; if (elapsed > PERIOD_DURATION) { current_period = (current_period + 1) % MAX_PERIODS; period_presses[current_period] = 0; periods = (periods < MAX_PERIODS - 1) ? periods + 1 : MAX_PERIODS - 1; elapsed = 0; - /* if (wpm_timer == 0) { */ - wpm_timer = timer_read32(); - /* } else { */ - /* wpm_timer += PERIOD_DURATION; */ - /* } */ + wpm_timer = timer_read32(); } if (presses < 2) // don't guess high WPM based on a single keypress. wpm_now = 0; -#if defined WPM_LAUNCH_CONTROL +#if defined(WPM_LAUNCH_CONTROL) + /* + * If the `WPM_LAUNCH_CONTROL` option is enabled, then whenever our WPM + * drops to absolute zero due to no typing occurring within our sample + * ring buffer, we reset and start measuring fresh, which lets our WPM + * immediately reach the correct value even before a full sampling buffer + * has been filled. + */ if (presses == 0) { - current_period = 0; - periods = 0; - wpm_now = 0; + current_period = 0; + periods = 0; + wpm_now = 0; + period_presses[0] = 0; } #endif // WPM_LAUNCH_CONTROL -#ifndef WPM_UNFILTERED +#if defined(WPM_UNFILTERED) + current_wpm = wpm_now; +#else int32_t latency = timer_elapsed32(smoothing_timer); if (latency > LATENCY) { smoothing_timer = timer_read32(); @@ -150,7 +163,5 @@ void decay_wpm(void) { } current_wpm = prev_wpm + (latency * ((int)next_wpm - (int)prev_wpm) / LATENCY); -#else - current_wpm = wpm_now; #endif } diff --git a/quantum/wpm.h b/quantum/wpm.h index c8e7d26684..305d75b450 100644 --- a/quantum/wpm.h +++ b/quantum/wpm.h @@ -26,7 +26,7 @@ # define WPM_SAMPLE_SECONDS 5 #endif #ifndef WPM_SAMPLE_PERIODS -# define WPM_SAMPLE_PERIODS 50 +# define WPM_SAMPLE_PERIODS 25 #endif bool wpm_keycode(uint16_t keycode); @@ -1,3 +1,7 @@ +# This is the `develop` branch! + +See the [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) document for more information. + # Quantum Mechanical Keyboard Firmware [](https://github.com/qmk/qmk_firmware/tags) diff --git a/tests/auto_shift/test_auto_shift.cpp b/tests/auto_shift/test_auto_shift.cpp index 9c5ed9a832..a19b5dfa82 100644 --- a/tests/auto_shift/test_auto_shift.cpp +++ b/tests/auto_shift/test_auto_shift.cpp @@ -42,7 +42,6 @@ TEST_F(AutoShift, key_release_before_timeout) { /* Release regular key */ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -65,8 +64,6 @@ TEST_F(AutoShift, key_release_after_timeout) { EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/basic/test_action_layer.cpp b/tests/basic/test_action_layer.cpp index 1b12d13642..fe5c729f7c 100644 --- a/tests/basic/test_action_layer.cpp +++ b/tests/basic/test_action_layer.cpp @@ -131,14 +131,12 @@ TEST_F(ActionLayer, MomentaryLayerDoesNothing) { set_keymap({layer_key}); /* Press and release MO, nothing should happen. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -153,8 +151,7 @@ TEST_F(ActionLayer, MomentaryLayerWithKeypress) { set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); /* Press MO. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(1)); @@ -175,8 +172,7 @@ TEST_F(ActionLayer, MomentaryLayerWithKeypress) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release MO */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(0)); @@ -199,8 +195,7 @@ TEST_F(ActionLayer, ToggleLayerDoesNothing) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release TG. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(1)); @@ -223,8 +218,7 @@ TEST_F(ActionLayer, ToggleLayerUpAndDown) { EXPECT_TRUE(layer_state_is(1)); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); toggle_layer_1_on_layer_0.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(1)); @@ -237,8 +231,7 @@ TEST_F(ActionLayer, ToggleLayerUpAndDown) { EXPECT_TRUE(layer_state_is(0)); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); toggle_layer_0_on_layer_1.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(0)); @@ -254,14 +247,13 @@ TEST_F(ActionLayer, LayerTapToggleDoesNothing) { set_keymap({layer_key}); /* Press and release TT. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(1)); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(0)); @@ -279,7 +271,6 @@ TEST_F(ActionLayer, LayerTapToggleWithKeypress) { set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); /* Press TT. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); layer_key.press(); run_one_scan_loop(); @@ -298,8 +289,7 @@ TEST_F(ActionLayer, LayerTapToggleWithKeypress) { EXPECT_TRUE(layer_state_is(1)); testing::Mock::VerifyAndClearExpectations(&driver); - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.release(); run_one_scan_loop(); EXPECT_TRUE(layer_state_is(0)); @@ -317,8 +307,7 @@ TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); /* Tap TT five times . */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(9); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); diff --git a/tests/basic/test_keypress.cpp b/tests/basic/test_keypress.cpp index 1c175c9d56..044fc29378 100644 --- a/tests/basic/test_keypress.cpp +++ b/tests/basic/test_keypress.cpp @@ -85,7 +85,7 @@ TEST_F(KeyPress, CorrectKeysAreReportedWhenTwoKeysArePressed) { TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { TestDriver driver; auto key_a = KeymapKey(0, 0, 0, KC_A); - auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); set_keymap({key_a, key_lsft}); @@ -110,8 +110,8 @@ TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { TEST_F(KeyPress, PressLeftShiftAndControl) { TestDriver driver; - auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); - auto key_lctrl = KeymapKey(0, 5, 0, KC_LCTRL); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); + auto key_lctrl = KeymapKey(0, 5, 0, KC_LEFT_CTRL); set_keymap({key_lctrl, key_lsft}); @@ -138,8 +138,8 @@ TEST_F(KeyPress, PressLeftShiftAndControl) { TEST_F(KeyPress, LeftAndRightShiftCanBePressedAtTheSameTime) { TestDriver driver; - auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); - auto key_rsft = KeymapKey(0, 4, 0, KC_RSFT); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); + auto key_rsft = KeymapKey(0, 4, 0, KC_RIGHT_SHIFT); set_keymap({key_rsft, key_lsft}); @@ -175,12 +175,12 @@ TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { // The underlying cause is that we use only one bit to represent the right hand // modifiers. combo_key.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL, KC_O))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL, KC_O))); keyboard_task(); combo_key.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } @@ -189,18 +189,18 @@ TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { TestDriver driver; InSequence s; auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); set_keymap({key_plus, key_eql}); key_plus.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); key_plus.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -220,13 +220,13 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { TestDriver driver; InSequence s; auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); set_keymap({key_plus, key_eql}); key_plus.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -237,14 +237,13 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { testing::Mock::VerifyAndClearExpectations(&driver); key_plus.release(); - // BUG: Should really still return KC_EQL, but this is fine too - // It's also called twice for some reason - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + // BUG: Should really still return KC_EQUAL, but this is fine too + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); key_eql.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); } @@ -253,12 +252,12 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TestDriver driver; InSequence s; auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); set_keymap({key_plus, key_eql}); key_eql.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -268,13 +267,13 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { testing::Mock::VerifyAndClearExpectations(&driver); key_plus.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); key_plus.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -284,12 +283,12 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { TestDriver driver; InSequence s; auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); set_keymap({key_plus, key_eql}); key_eql.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -309,9 +308,7 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { testing::Mock::VerifyAndClearExpectations(&driver); key_plus.release(); - // This report is not needed - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); -}
\ No newline at end of file +} diff --git a/tests/basic/test_one_shot_keys.cpp b/tests/basic/test_one_shot_keys.cpp index 98178912e4..43fc3e1ba3 100644 --- a/tests/basic/test_one_shot_keys.cpp +++ b/tests/basic/test_one_shot_keys.cpp @@ -175,22 +175,20 @@ TEST_F(OneShot, OSLWithAdditionalKeypress) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release OSL key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); osl_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(2); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(1); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.press(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); regular_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp index ab9dd1518b..00c2b33cb7 100644 --- a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp +++ b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp @@ -117,7 +117,6 @@ TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(layer_key.report_code))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.release(); @@ -125,7 +124,7 @@ TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) { testing::Mock::VerifyAndClearExpectations(&driver); /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_tap_hold_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp index 67f394653f..67706f80dc 100644 --- a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp +++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp @@ -119,7 +119,6 @@ TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key testing::Mock::VerifyAndClearExpectations(&driver); /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); regular_key.release(); @@ -127,7 +126,7 @@ TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key testing::Mock::VerifyAndClearExpectations(&driver); /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_tap_hold_key.release(); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp index 02416eed73..54e7daa22c 100644 --- a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp +++ b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp @@ -31,9 +31,8 @@ TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); /* Tap TT five times . */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ /* TODO: Tapping Force Hold breaks TT */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(10); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); layer_key.press(); run_one_scan_loop(); diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp index cb68429617..3ae7c4ccfd 100644 --- a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp +++ b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp @@ -60,7 +60,6 @@ TEST_F(TappingForceHold, tap_regular_key_while_mod_tap_key_is_held) { testing::Mock::VerifyAndClearExpectations(&driver); /* Idle for tapping term of mod tap hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); @@ -101,7 +100,6 @@ TEST_F(TappingForceHold, tap_mod_tap_key_while_mod_tap_key_is_held) { testing::Mock::VerifyAndClearExpectations(&driver); /* Idle for tapping term of first mod tap hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); diff --git a/tests/test_common/test_fixture.cpp b/tests/test_common/test_fixture.cpp index 0601b17191..91bf3e779e 100644 --- a/tests/test_common/test_fixture.cpp +++ b/tests/test_common/test_fixture.cpp @@ -48,7 +48,6 @@ void TestFixture::SetUpTestCase() { eeconfig_update_debug(debug_config.raw); TestDriver driver; - EXPECT_CALL(driver, send_keyboard_mock(_)); keyboard_init(); test_logger.info() << "TestFixture setup-up end." << std::endl; @@ -62,8 +61,6 @@ TestFixture::~TestFixture() { test_logger.info() << "TestFixture clean-up start." << std::endl; TestDriver driver; - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); - /* Reset keyboard state. */ clear_all_keys(); diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h index e1749f872d..319ff8487d 100644 --- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h +++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h @@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define _ARM_ATSAM_PROTOCOL_H_ #include "samd51j18a.h" -#include "md_bootloader.h" #include "timer.h" #include "d51_util.h" diff --git a/tmk_core/protocol/arm_atsam/md_bootloader.h b/tmk_core/protocol/arm_atsam/md_bootloader.h deleted file mode 100644 index 362b9bd52a..0000000000 --- a/tmk_core/protocol/arm_atsam/md_bootloader.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _MD_BOOTLOADER_H_ -#define _MD_BOOTLOADER_H_ - -extern uint32_t _srom; -extern uint32_t _lrom; -extern uint32_t _erom; - -#define BOOTLOADER_SERIAL_MAX_SIZE 20 // DO NOT MODIFY! - -#ifdef KEYBOARD_massdrop_ctrl -// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support -extern uint32_t _eram; -# define BOOTLOADER_MAGIC 0x3B9ACA00 -# define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4) -#endif - -#ifdef MD_BOOTLOADER - -# define MCU_HZ 48000000 -# define I2C_HZ 0 // Not used - -#endif // MD_BOOTLOADER - -#endif //_MD_BOOTLOADER_H_ diff --git a/tmk_core/protocol/arm_atsam/startup.c b/tmk_core/protocol/arm_atsam/startup.c index 7a5791ab55..ce043bad51 100644 --- a/tmk_core/protocol/arm_atsam/startup.c +++ b/tmk_core/protocol/arm_atsam/startup.c @@ -28,7 +28,6 @@ */ #include "samd51.h" -#include "md_bootloader.h" /* Initialize segments */ extern uint32_t _sfixed; @@ -496,6 +495,11 @@ __attribute__((section(".vectors"))) const DeviceVectors exception_table = { #endif }; +// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support +extern uint32_t _eram; +#define BOOTLOADER_MAGIC 0x3B9ACA00 +#define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4) + /** * \brief This is the code that gets called on processor reset. * To initialize the device, and call the main() routine. diff --git a/tmk_core/protocol/arm_atsam/usb/udc.c b/tmk_core/protocol/arm_atsam/usb/udc.c index d04e9b7b28..1f0c0d95d6 100644 --- a/tmk_core/protocol/arm_atsam/usb/udc.c +++ b/tmk_core/protocol/arm_atsam/usb/udc.c @@ -51,7 +51,8 @@ #include "udi_device_conf.h" #include "udi.h" #include "udc.h" -#include "md_bootloader.h" + +#define BOOTLOADER_SERIAL_MAX_SIZE 20 // DO NOT MODIFY! /** * \ingroup udc_group @@ -122,6 +123,8 @@ static uint8_t udc_string_product_name[] = USB_DEVICE_PRODUCT_NAME; # define USB_DEVICE_SERIAL_NAME_SIZE 0 #endif +extern uint32_t _srom; + uint8_t usb_device_serial_name_size = 0; #if defined USB_DEVICE_SERIAL_USE_BOOTLOADER_SERIAL uint8_t bootloader_serial_number[BOOTLOADER_SERIAL_MAX_SIZE + 1] = ""; diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index e3be96d93d..b9c2616058 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -69,8 +69,8 @@ extern keymap_config_t keymap_config; # include "outputselect.h" # ifdef MODULE_ADAFRUIT_BLE # include "adafruit_ble.h" -# else -# include "../serial.h" +# elif MODULE_RN42 +# include "rn42.h" # endif #endif @@ -90,46 +90,6 @@ extern keymap_config_t keymap_config; # include "joystick.h" #endif -// https://cdn.sparkfun.com/datasheets/Wireless/Bluetooth/bluetooth_cr_UG-v1.0r.pdf#G7.663734 -static inline uint16_t CONSUMER2RN42(uint16_t usage) { - switch (usage) { - case AC_HOME: - return 0x0001; - case AL_EMAIL: - return 0x0002; - case AC_SEARCH: - return 0x0004; - case AL_KEYBOARD_LAYOUT: - return 0x0008; - case AUDIO_VOL_UP: - return 0x0010; - case AUDIO_VOL_DOWN: - return 0x0020; - case AUDIO_MUTE: - return 0x0040; - case TRANSPORT_PLAY_PAUSE: - return 0x0080; - case TRANSPORT_NEXT_TRACK: - return 0x0100; - case TRANSPORT_PREV_TRACK: - return 0x0200; - case TRANSPORT_STOP: - return 0x0400; - case TRANSPORT_EJECT: - return 0x0800; - case TRANSPORT_FAST_FORWARD: - return 0x1000; - case TRANSPORT_REWIND: - return 0x2000; - case TRANSPORT_STOP_EJECT: - return 0x4000; - case AL_LOCAL_BROWSER: - return 0x8000; - default: - return 0; - } -} - uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -688,14 +648,7 @@ static void send_keyboard(report_keyboard_t *report) { # ifdef MODULE_ADAFRUIT_BLE adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys)); # elif MODULE_RN42 - serial_send(0xFD); - serial_send(0x09); - serial_send(0x01); - serial_send(report->mods); - serial_send(report->reserved); - for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { - serial_send(report->keys[i]); - } + rn42_send_keyboard(report); # endif return; } @@ -741,16 +694,8 @@ static void send_mouse(report_mouse_t *report) { # ifdef MODULE_ADAFRUIT_BLE // FIXME: mouse buttons adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons); -# else - serial_send(0xFD); - serial_send(0x00); - serial_send(0x03); - serial_send(report->buttons); - serial_send(report->x); - serial_send(report->y); - serial_send(report->v); // should try sending the wheel v here - serial_send(report->h); // should try sending the wheel h here - serial_send(0x00); +# elif MODULE_RN42 + rn42_send_mouse(report); # endif return; } @@ -821,15 +766,7 @@ static void send_consumer(uint16_t data) { # ifdef MODULE_ADAFRUIT_BLE adafruit_ble_send_consumer_key(data); # elif MODULE_RN42 - static uint16_t last_data = 0; - if (data == last_data) return; - last_data = data; - uint16_t bitmap = CONSUMER2RN42(data); - serial_send(0xFD); - serial_send(0x03); - serial_send(0x03); - serial_send(bitmap & 0xFF); - serial_send((bitmap >> 8) & 0xFF); + rn42_send_consumer(data); # endif return; } @@ -1077,7 +1014,7 @@ void protocol_pre_init(void) { sei(); #if defined(MODULE_RN42) - serial_init(); + rn42_init(); #endif /* wait for USB startup & debug output */ diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c index a43755f899..0b992ba6c5 100644 --- a/tmk_core/protocol/usb_descriptor.c +++ b/tmk_core/protocol/usb_descriptor.c @@ -450,7 +450,7 @@ const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { #endif #ifndef USB_POLLING_INTERVAL_MS -# define USB_POLLING_INTERVAL_MS 10 +# define USB_POLLING_INTERVAL_MS 1 #endif /* diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c index bd0f1c21aa..8bdcccc9c9 100644 --- a/tmk_core/protocol/vusb/vusb.c +++ b/tmk_core/protocol/vusb/vusb.c @@ -647,7 +647,6 @@ const PROGMEM uchar console_hid_report[] = { # define USB_MAX_POWER_CONSUMPTION 500 #endif -// TODO: change this to 10ms to match LUFA #ifndef USB_POLLING_INTERVAL_MS # define USB_POLLING_INTERVAL_MS 1 #endif diff --git a/users/drashna/oled/oled_stuff.c b/users/drashna/oled/oled_stuff.c index de84766725..26411305e7 100644 --- a/users/drashna/oled/oled_stuff.c +++ b/users/drashna/oled/oled_stuff.c @@ -341,9 +341,8 @@ void render_wpm(uint8_t padding) { #endif } -#if defined(KEYBOARD_handwired_tractyl_manuform) || defined(KEYBOARD_bastardkb_charybdis) -extern kb_config_data_t kb_config; -void render_pointing_dpi_status(uint8_t padding) { +#if defined(POINTING_DEVICE_ENABLE) +void render_pointing_dpi_status(uint16_t cpi, uint8_t padding) { oled_write_P(PSTR("CPI:"), false); if (padding) { for (uint8_t n = padding - 1; n > 0; n--) { @@ -351,7 +350,7 @@ void render_pointing_dpi_status(uint8_t padding) { } } - oled_write(get_u16_str(kb_config.device_cpi, ' '), false); + oled_write(get_u16_str(cpi, ' '), false); } #endif @@ -374,8 +373,10 @@ __attribute__((weak)) void oled_driver_render_logo_left(void) { render_wpm(0); # endif oled_write_P(PSTR(" "), false); -# if defined(KEYBOARD_handwired_tractyl_manuform) || defined(KEYBOARD_bastardkb_charybdis) - render_pointing_dpi_status(1); +# if defined(KEYBOARD_handwired_tractyl_manuform) + render_pointing_dpi_status(kb_config_data.device_cpi, 1); +# elif defined(KEYBOARD_bastardkb_charybdis) + render_pointing_dpi_status(, 1); # endif oled_set_cursor(0, 4); #else diff --git a/users/drashna/oled/oled_stuff.h b/users/drashna/oled/oled_stuff.h index 8795684d6a..fd64b50874 100644 --- a/users/drashna/oled/oled_stuff.h +++ b/users/drashna/oled/oled_stuff.h @@ -33,7 +33,7 @@ void render_bootmagic_status(void); void render_user_status(void); void oled_driver_render_logo(void); void render_wpm(uint8_t padding); -void render_pointing_dpi_status(uint8_t padding); +void render_pointing_dpi_status(uint16_t cpi, uint8_t padding); void oled_driver_render_logo_left(void); void oled_driver_render_logo_right(void); diff --git a/users/vitoni/readme.adoc b/users/vitoni/readme.adoc new file mode 100644 index 0000000000..acf65793d2 --- /dev/null +++ b/users/vitoni/readme.adoc @@ -0,0 +1,16 @@ += User functions + +Functions are mostly related to changing the RGB lights depending on user interaction and when idling. + +== utils.h + +Common functions are declared in link:utils.h[]. These function are not directly RGB related but used to modify state and calculate values. + +== rgb_matrix_effects.h + +Functions in link:rgb_matrix_effects.h[] make use of common function in `utils.h` and are used to create to RGB matrix effects such as fading or breathing. + +== vitoni.h + +The functions declared in link:vitoni.h[] are used as entry points for usage of RGB effects. +One entry point is `matrix_scan` based for regular task while the other is `process_record` based for user activity tasks. diff --git a/users/vitoni/rgb_matrix_effects.c b/users/vitoni/rgb_matrix_effects.c new file mode 100644 index 0000000000..3a13e99bc7 --- /dev/null +++ b/users/vitoni/rgb_matrix_effects.c @@ -0,0 +1,236 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "rgb_matrix_effects.h" + +#include <rgb_matrix.h> +#include <lib/lib8tion/lib8tion.h> + +#include "utils.h" + +/* + Offset used to start at the right point in th curve to avoid big jumps in brightness + 0 => 0% (signed) => 50% (unsigned) + 64 => 100% (signed) => 100% (unsigned) + 128 => 0% (signed) => 50% (unsigned) + 192 => -100% (signed) => 0% (unsigned) +*/ +enum PHASE { + PHASE_ZERO_RAISING + ,PHASE_HIGH + ,PHASE_ZERO_FALLING + ,PHASE_LOW +}; + +/** + * @brief Calculates the offset so that a specific time is aligned to a specific point in the sine curve. + * @param[in] time The time for which the offset shopuld be calculated. + * @param[in] phase Phase which should be reached with the offset + * @see PHASE + */ +uint8_t offset_for_time(const uint8_t time, const uint8_t phase) { + switch (phase) { + case PHASE_ZERO_RAISING: + return 0 - time; + case PHASE_HIGH: + return 64 - time; + case PHASE_ZERO_FALLING: + return 128 - time; + case PHASE_LOW: + return 192 - time; + default: + return 0; + } +} + +/** + * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects. + * @return scaled down timer + * @see rgb_time_2_scale_w_factor() + */ +uint8_t rgb_time_2_scale(void) { + static const uint8_t factor = 1; + return rgb_time_2_scale_w_factor(factor); +} + +/* + * Used to slow down RGB speed. + */ +static const uint8_t rgb_speed_divisor = 8; + +/** + * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects. + * @details Usually these calculations aredone internally by some RGB effects. + This method exposed to scaling so that all effects to have same timebase. If `rgb_matrix_config.speed` all effects are affected the same. + * @param[in] factor The factor can be used to speed up some operations in relation to others. + * @return scaled down timer taking into account the given factor + * @see g_rgb_timer + * @see rgb_matrix_config.speed + */ +uint8_t rgb_time_2_scale_w_factor(const uint8_t rgb_speed_factor) { + const uint8_t scaled_time = scale16by8(g_rgb_timer, rgb_matrix_config.speed * rgb_speed_factor / rgb_speed_divisor); + + return scaled_time; +} + +/** + * @brief Inverse function to calculate time required to execute `timer` steps. + * @details This method allows calculation of the time needed to execute N `timer`steps. + Usefull when using a scaled down time but requiring the time needed to perform these steps. + * @param[in] scaled_time scaled down timer to inverse to time + * @return time corresponding to scaled down time + * @see rgb_time_2_scale() + */ +uint16_t scale_2_rgb_time(const uint8_t scaled_time) { + const uint16_t time = scaled_time * rgb_speed_divisor * UINT8_MAX / rgb_matrix_config.speed; + + return time; +} + +bool fade_in_ranged(const uint8_t time, const uint8_t range_min, const uint8_t range_max) { + static const uint8_t max_delta = 1; + return scaled_sin_up(time, range_min, range_max, max_delta, &(rgb_matrix_config.hsv.v)); +} + +bool fade_out_ranged(const uint8_t time, const uint8_t range_min, const uint8_t range_max) { + static const uint8_t max_delta = 1; + return scaled_sin_down(time, range_min, range_max, max_delta, &(rgb_matrix_config.hsv.v)); +} + +/** + * @brief Convenience method to eventually skip the value part when setting HSV. + * @details When setting HSV this includes the value/brightness. + As changing brightness might interfer with fading or breathing effects, + this method can skip the value part of HSV (depending on the preprocessor flag: RGB_FADE_IN). + * @param[in] hue Hue + * @param[in] sat Saturation + * @param[in] hue Value (brightness) + * @see rgb_matrix_sethsv_noeeprom() + */ +void rgb_matrix_sethsv_noeeprom_user(const uint16_t hue, const uint8_t sat, const uint8_t val) { +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) + rgb_matrix_config.hsv.h = hue; + rgb_matrix_config.hsv.s = sat; + // omitting setting the value to avoid interfering with effects +// rgb_matrix_config.hsv.v = val; +#else + rgb_matrix_sethsv_noeeprom(hue, sat, val); +#endif +} + +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) +/** + * @brief Calculates the time offset required by fade in. + * @details Using an arbitrary timer any point on the sine curve might be pointed to. + * The offest is calculated so that + * a) the point is at the lowest point in the curve and the curve is raising + * b) the point is near the current brightness (eg. fade in might be called while fading out and the lowest value has not yet been reached). + * @param[in] time Current time usually represented by (usually scaled) timer + * @return Offset required so that time matches the current brightness + */ +uint8_t calc_fade_in_offset(const uint8_t time) { + static const uint8_t max_steps = UINT8_MAX/2; + static const uint8_t range_min = 0; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + // start at the right point in the sine curve + uint8_t time_offset = offset_for_time(time, PHASE_LOW); + + // find the right offset to match the current brightness + for (int i = 1; i < max_steps; i++) { + const uint8_t value = scaled_sin(time + time_offset + 1, range_min, range_max); + if (in_range(value, range_min, range_max) && value < rgb_matrix_config.hsv.v) { + time_offset++; + } else { + break; + } + } + + return time_offset; +} + +/** + * @brief Increases value/brightness until reaching RGB_MATRIX_MAXIMUM_BRIGHTNESS based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if RGB_MATRIX_MAXIMUM_BRIGHTNESS has been reached, `false` otherwise. + */ +bool fade_in(const uint8_t time) { + static const uint8_t range_min = 0; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + return fade_in_ranged(time, range_min, range_max); +} +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) +/** + * @brief Calculates the time offset required by fade out. + * @details Using an arbitrary timer any point on the Sinus curve might be pointed to. + * The offest is calculated so that + * a) the point is at the highest point in the curve and the curve is failing + * b) the point is near the current brightness (eg. fade out might be called while on breath effect). + * @param[in] time Current time usually represented by a(usually scaled) timer + * @return Offset required so that time matches the current brightness + */ +uint8_t calc_fade_out_offset(const uint8_t time) { + static const uint8_t range_min = 0; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + // start at the right point in the sin() curve + uint8_t time_offset = offset_for_time(time, PHASE_HIGH); + + // find the right offset to match the current brightness + for (int i = 1; i < 127; i++) { + const uint8_t value = scaled_sin(time + time_offset + 1, range_min, range_max); + if (in_range(value, range_min, range_max) && rgb_matrix_config.hsv.v < value) { + time_offset++; + } else { + break; + } + } + + return time_offset; +} +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) +/** + * @brief Decreases value/brightness until reaching 0 based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if 0 has been reached, `false` otherwise. + */ +bool fade_out(const uint8_t time) { + static const uint8_t range_min = 0; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + return fade_out_ranged(time, range_min, range_max); +} +#endif + +#if defined(RGB_IDLE_TIMEOUT) +/** + * @brief Decreases value/brightness until reaching `RGB_IDLE_MINIMUM_BRIGHTNESS` based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if `RGB_IDLE_MINIMUM_BRIGHTNESS` has been reached, `false` otherwise. + */ +bool idle_fade_out(const uint8_t time) { + static const uint8_t range_min = RGB_IDLE_MINIMUM_BRIGHTNESS; + static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS; + + return fade_out_ranged(time, range_min, range_max); +} + +#if defined(RGB_IDLE_BREATHE) +/** + * @brief Changes value/brightness to create a breathing effect based on given timer. + * @details Brightness will breathe in the range starting from `RGB_IDLE_MINIMUM_BRIGHTNESS` to `RGB_IDLE_MAXIMUM_BRIGHTNESS`. + * @param[in] time A (usually scaled) timer + */ +void idle_breathe(const uint8_t time) { + static const uint8_t range_min = RGB_IDLE_MINIMUM_BRIGHTNESS; + static const uint8_t range_max = RGB_IDLE_MAXIMUM_BRIGHTNESS; + + rgb_matrix_config.hsv.v = scaled_sin(time, range_min, range_max); +} +#endif // RGB_IDLE_BREATHE +#endif // RGB_IDLE_TIMEOUT diff --git a/users/vitoni/rgb_matrix_effects.h b/users/vitoni/rgb_matrix_effects.h new file mode 100644 index 0000000000..ed74500b18 --- /dev/null +++ b/users/vitoni/rgb_matrix_effects.h @@ -0,0 +1,174 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +/** + * States reflecting the state of the keyboard. + * Dependeing on these states various effects can set for the RGB matrix. + */ +enum states { + REGULAR //!< when in regular use +#if defined(RGB_IDLE_TIMEOUT) + ,IDLE_FADE_OUT //!< when started idling + ,IDLE //!< when idling +#endif +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) + ,FADE_IN //!< when starting initially or before going back to REGULAR +#endif +#if defined(RGB_DISABLE_WITH_FADE_OUT) + ,FADE_OUT //!< before supending +#endif + ,SUSPENDED //!< expecting to be suspended by RGB_DISABLE_TIMEOUT any time +}; + +/** + * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects. + * @details Usually these calculations aredone internally by some RGB effects. + This method exposed to scaling so that all effects to have same timebase. If `rgb_matrix_config.speed` all effects are affected the same. + * @param[in] factor The factor can be used to speed up some operations in relation to others. + * @return scaled down timer taking into account the given factor + * @see g_rgb_timer + * @see rgb_matrix_config.speed + */ +uint8_t rgb_time_2_scale_w_factor(const uint8_t factor); + +/** + * @brief Scales down `g_rgb_timer` so that it can be used for RGB effects. + * @return scaled down timer + * @see rgb_time_2_scale_w_factor() + */ +uint8_t rgb_time_2_scale(void); + +/** + * @brief Inverse function to calculate time required to execute `timer` steps. + * @details This method allows calculation of the time needed to execute N `timer`steps. + Usefull when using a scaled down time but requiring the time needed to perform these steps. + * @param[in] scaled_time scaled down timer to inverse to time + * @return time corresponding to scaled down time + * @see rgb_time_2_scale() + */ +uint16_t scale_2_rgb_time(const uint8_t scaled_time); + +/** + * @brief Convenience method to eventually skip the value part when setting HSV. + * @details When setting HSV this includes the value/brightness. + As changing brightness might interfer with fading or breathing effects, + this method can skip the value part of HSV (depending on the preprocessor flag: RGB_FADE_IN). + * @param[in] hue Hue + * @param[in] sat Saturation + * @param[in] hue Value (brightness) + * @see rgb_matrix_sethsv_noeeprom() + */ +void rgb_matrix_sethsv_noeeprom_user(const uint16_t hue, const uint8_t sat, const uint8_t val); + +#if defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) +# if defined(RGB_MATRIX_MAXIMUM_BRIGHTNESS) +# if (RGB_MATRIX_MAXIMUM_BRIGHTNESS) < 1 +# error "RGB_MATRIX_MAXIMUM_BRIGHTNESS must not be less than ONE" +# endif +# if UINT8_MAX < (RGB_MATRIX_MAXIMUM_BRIGHTNESS) +# error "RGB_MATRIX_MAXIMUM_BRIGHTNESS must not be larger than UINT8_MAX" +# endif +# else +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 +# endif +#endif + +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) +/** + * @brief Calculates the time offset required by fade in. + * @details Using an arbitrary timer any point on the sine curve might be pointed to. + * The offset is calculated so that + * a) the point is at the lowest point in the curve and the curve is raising + * b) the point is near the current brightness (eg. fade in might be called while fading out and the lowest value has not yet been reached). + * @param[in] time Current time usually represented by a(usually scaled) timer + * @return Offset required so that time matches the current brightness + */ +uint8_t calc_fade_in_offset(const uint8_t time); + +/** + * @brief Increases value/brightness until reaching RGB_MATRIX_MAXIMUM_BRIGHTNESS based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if RGB_MATRIX_MAXIMUM_BRIGHTNESS has been reached, `false` otherwise. + */ +bool fade_in(const uint8_t time); +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) +# if !defined(RGB_DISABLE_TIMEOUT) +# warning "RGB_DISABLE_WITH_FADE_OUT expects RGB_DISABLE_TIMEOUT to be defined" +# endif +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) +/** + * @brief Calculates the time offset required by fade out. + * @details Using an arbitrary timer any point on the Sinus curve might be pointed to. + * The offest is calculated so that + * a) the point is at the highest point in the curve and the curve is failing + * b) the point is near the current brightness (eg. fade out might be called while on breath effect). + * @param[in] time Current time usually represented by a(usually scaled) timer + * @return Offset required so that time matches the current brightness + */ +uint8_t calc_fade_out_offset(const uint8_t time); +#endif + +#if defined(RGB_DISABLE_WITH_FADE_OUT) +/** + * @brief Decreases value/brightness until reaching 0 based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if 0 has been reached, `false` otherwise. + */ +bool fade_out(const uint8_t time); +#endif + +#if defined(RGB_IDLE_TIMEOUT) +# if RGB_IDLE_TIMEOUT < 0 +# error "RGB_IDLE_TIMEOUT must not be less than ZERO" +# endif +# if !defined(RGB_IDLE_MINIMUM_BRIGHTNESS) + // minimum brightness when idling +# define RGB_IDLE_MINIMUM_BRIGHTNESS (RGB_MATRIX_MAXIMUM_BRIGHTNESS/5) +# endif +# if RGB_IDLE_MINIMUM_BRIGHTNESS < 0 +# error "RGB_IDLE_MINIMUM_BRIGHTNESS must not be less than ZERO" +# endif // RGB_IDLE_MINIMUM_BRIGHTNESS < 0 +# if RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS +# error "RGB_IDLE_MINIMUM_BRIGHTNESS must be less than RGB_MATRIX_MAXIMUM_BRIGHTNESS" +# endif // RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS + +/** + * @brief Decreases value/brightness until reaching `RGB_IDLE_MINIMUM_BRIGHTNESS` based on given timer. + * @param[in] time A (usually scaled) timer + * @return Returns `true` if `RGB_IDLE_MINIMUM_BRIGHTNESS` has been reached, `false` otherwise. + */ +bool idle_fade_out(const uint8_t time); + +#if defined(RGB_IDLE_BREATHE) +# if !defined(RGB_IDLE_MAXIMUM_BRIGHTNESS) + // maximum brightness when idling +# define RGB_IDLE_MAXIMUM_BRIGHTNESS (RGB_MATRIX_MAXIMUM_BRIGHTNESS*3/5) +# endif +# if !(0 <= RGB_IDLE_MAXIMUM_BRIGHTNESS) +# error "RGB_IDLE_MINIMUM_BRIGHTNESS must not be less than ZERO, was: " RGB_IDLE_MAXIMUM_BRIGHTNESS +# endif // RGB_IDLE_MAXIMUM_BRIGHTNESS < 0 +# if !(RGB_IDLE_MINIMUM_BRIGHTNESS < RGB_IDLE_MAXIMUM_BRIGHTNESS) +# error "RGB_IDLE_MINIMUM_BRIGHTNESS must be less than RGB_IDLE_MAXIMUM_BRIGHTNESS" +# endif // RGB_IDLE_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MINIMUM_BRIGHTNESS +# if !(RGB_IDLE_MAXIMUM_BRIGHTNESS <= RGB_MATRIX_MAXIMUM_BRIGHTNESS) +# error "RGB_IDLE_MAXIMUM_BRIGHTNESS must be less than or equal to RGB_MATRIX_MAXIMUM_BRIGHTNESS" +# endif // RGB_MATRIX_MAXIMUM_BRIGHTNESS <= RGB_IDLE_MAXIMUM_BRIGHTNESS + +/** + * @brief Changes value/brightness to create a breathing effect based on given timer. + * @details Brightness will breathe in the range starting from `RGB_IDLE_MINIMUM_BRIGHTNESS` to `RGB_IDLE_MAXIMUM_BRIGHTNESS`. + * @param[in] time A (usually scaled) timer + */ +void idle_breathe(const uint8_t time); +#endif // RGB_IDLE_BREATHE + +#endif // RGB_IDLE_TIMEOUT diff --git a/users/vitoni/rules.mk b/users/vitoni/rules.mk new file mode 100644 index 0000000000..2f3b0d15e5 --- /dev/null +++ b/users/vitoni/rules.mk @@ -0,0 +1,4 @@ +SRC += \ + vitoni.c \ + utils.c \ + rgb_matrix_effects.c diff --git a/users/vitoni/utils.c b/users/vitoni/utils.c new file mode 100644 index 0000000000..fb011570e4 --- /dev/null +++ b/users/vitoni/utils.c @@ -0,0 +1,129 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "utils.h" + +#include <lib/lib8tion/lib8tion.h> + +/** +* @brief Changes `*value` to `new_value`. +* @param[in,out] value Pointer to variable to be changed. +* @param[in] new_value Value to be changed. +* @param[in,out] changed Flag indicating `*value` and `new_value` were different. +*/ +void update_value(uint8_t *value, const uint8_t new_value, bool *changed) { + if (new_value != (*value)) { + (*changed) = true; + (*value) = new_value; + } +} + +/** +* @brief Checks whether a value is in the given range. +* @param[in] value Value to be checked. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @return `true` if (range_min <= value <= range_max), `false` otherwise +*/ +bool in_range(const uint8_t value, const uint8_t range_min, const uint8_t range_max) { + return range_min <= value && value <= range_max; +} + +/** +* @brief Calculates the sine value based on sin8() and scales it to the given range (unsigned). +* +* Table of values for unscaled sin8() eg. a theta of 0 results to 128 and a theta of 255 (240+15) results to 125. + 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + +---------------------------------------------------------------- + 0: 128 131 134 137 140 143 146 149 152 155 158 161 164 167 170 173 + 16: 177 179 182 184 187 189 192 194 197 200 202 205 207 210 212 215 + 32: 218 219 221 223 224 226 228 229 231 233 234 236 238 239 241 243 + 48: 245 245 246 246 247 248 248 249 250 250 251 251 252 253 253 254 + 64: 255 254 253 253 252 251 251 250 250 249 248 248 247 246 246 245 + 80: 245 243 241 239 238 236 234 233 231 229 228 226 224 223 221 219 + 96: 218 215 212 210 207 205 202 200 197 194 192 189 187 184 182 179 + 112: 177 173 170 167 164 161 158 155 152 149 146 143 140 137 134 131 + 128: 128 125 122 119 116 113 110 107 104 101 98 95 92 89 86 83 + 144: 79 77 74 72 69 67 64 62 59 56 54 51 49 46 44 41 + 160: 38 37 35 33 32 30 28 27 25 23 22 20 18 17 15 13 + 176: 11 11 10 10 9 8 8 7 6 6 5 5 4 3 3 2 + 192: 1 2 3 3 4 5 5 6 6 7 8 8 9 10 10 11 + 208: 11 13 15 17 18 20 22 23 25 27 28 30 32 33 35 37 + 224: 38 41 44 46 49 51 54 56 59 62 64 67 69 72 74 77 + 240: 79 83 86 89 92 95 98 101 104 107 110 113 116 119 122 125 +* +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @return Calculated sine value mapped to the given range. +*/ +uint8_t scaled_sin(const uint8_t theta, const uint8_t range_min, const uint8_t range_max) { + const uint8_t range = range_max - range_min; + return scale8(sin8(theta), range) + range_min; +} + +/** +* @brief Increases the given value until reaching range_max. +* The increments occur following an upwards sine wave (scaled from range_min to range_max). +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @param[in] max_delta Maximum delta between value and range_max (due to values being integers and eventually not fully matching). +* @param[in,out] value Reference of variable to be increased +* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise +* @see scaled_sin() +*/ +bool scaled_sin_up(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value) { + // ensure upper range bound + if (range_max <= (*value)) { + (*value) = range_max; + return true; + } + + const uint8_t new_value = scaled_sin(theta, range_min, range_max); + if (in_range(new_value, range_min, range_max) && (*value) < new_value) { + (*value) = new_value; + + return range_max == (*value); + } + + const uint8_t delta = range_max - (*value); + if (delta <= max_delta) { + (*value) = range_max; + } + + return delta <= max_delta; +} + +/** +* @brief Decreases the given value until reaching range_min. +* The decrements occur following an downwards sinus wave (scaled from range_min to range_max). +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sinus calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @param[in] max_delta Maximum delta between value and range_min (due to values being integers and eventually not fully matching). +* @param[in,out] value Reference of variable to be decreased +* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise +* @see scaled_sin() +*/ +bool scaled_sin_down(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value) { + // ensure lower range bound + if ((*value) <= range_min) { + (*value) = range_min; + return true; + } + + const uint8_t new_value = scaled_sin(theta, range_min, range_max); + if (in_range(new_value, range_min, range_max) && new_value < (*value)) { + (*value) = new_value; + + return range_min == (*value); + } + + const uint8_t delta = (*value) - range_min; + if (delta <= max_delta) { + (*value) = range_min; + } + + return delta <= max_delta; +} diff --git a/users/vitoni/utils.h b/users/vitoni/utils.h new file mode 100644 index 0000000000..987b612d58 --- /dev/null +++ b/users/vitoni/utils.h @@ -0,0 +1,80 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +/** +* @brief Changes `*value` to `new_value`. +* @param[in,out] value Pointer to variable to be changed. +* @param[in] new_value Value to be changed. +* @param[in,out] changed Flag indicating `*value` and `new_value` were different. +*/ +void update_value(uint8_t *value, const uint8_t new_value, bool *changed); + +/** +* @brief Checks whether a value is in the given range. +* @param[in] value Value to be checked. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @return `true` if (range_min <= value <= range_max), `false` otherwise +*/ +bool in_range(const uint8_t value, const uint8_t range_min, const uint8_t range_max); + +/** +* @brief Calculates the sine value based on sin8() and scales it to the given range (unsigned). +* +* Table of values for unscaled sin8() eg. a theta of 0 results to 128 and a theta of 255 (240+15) results to 125. + 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + +---------------------------------------------------------------- + 0: 128 131 134 137 140 143 146 149 152 155 158 161 164 167 170 173 + 16: 177 179 182 184 187 189 192 194 197 200 202 205 207 210 212 215 + 32: 218 219 221 223 224 226 228 229 231 233 234 236 238 239 241 243 + 48: 245 245 246 246 247 248 248 249 250 250 251 251 252 253 253 254 + 64: 255 254 253 253 252 251 251 250 250 249 248 248 247 246 246 245 + 80: 245 243 241 239 238 236 234 233 231 229 228 226 224 223 221 219 + 96: 218 215 212 210 207 205 202 200 197 194 192 189 187 184 182 179 + 112: 177 173 170 167 164 161 158 155 152 149 146 143 140 137 134 131 + 128: 128 125 122 119 116 113 110 107 104 101 98 95 92 89 86 83 + 144: 79 77 74 72 69 67 64 62 59 56 54 51 49 46 44 41 + 160: 38 37 35 33 32 30 28 27 25 23 22 20 18 17 15 13 + 176: 11 11 10 10 9 8 8 7 6 6 5 5 4 3 3 2 + 192: 1 2 3 3 4 5 5 6 6 7 8 8 9 10 10 11 + 208: 11 13 15 17 18 20 22 23 25 27 28 30 32 33 35 37 + 224: 38 41 44 46 49 51 54 56 59 62 64 67 69 72 74 77 + 240: 79 83 86 89 92 95 98 101 104 107 110 113 116 119 122 125 +* +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @return Calculated sine value mapped to the given range. +*/ +uint8_t scaled_sin(const uint8_t theta, const uint8_t range_min, const uint8_t range_max); + +/** +* @brief Increases the given value until reaching range_max. +* The increments occur following an upwards sine wave (scaled from range_min to range_max). +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sine calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @param[in] max_delta Maximum delta between value and range_max (due to values being integers and eventually not fully matching). +* @param[in,out] value Reference of variable to be increased +* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise +* @see scaled_sin() +*/ +bool scaled_sin_up(const uint8_t thea, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value); + +/** +* @brief Decreases the given value until reaching range_min. +* The decrements occur following an downwards sinus wave (scaled from range_min to range_max). +* @param[in] theta Angle (a full circle mapped to 0-255) used as input for sinus calculation. +* @param[in] range_min Lower bound of range (inclusive). +* @param[in] range_max Upper bound of range (inclusive). +* @param[in] max_delta Maximum delta between value and range_min (due to values being integers and eventually not fully matching). +* @param[in,out] value Reference of variable to be decreased +* @return `true` if value and range_max are within a delta of 3 (chosen by fair dice rolling), `false` otherwise +* @see scaled_sin() +*/ +bool scaled_sin_down(const uint8_t theta, const uint8_t range_min, const uint8_t range_max, const uint8_t max_delta, uint8_t *value); diff --git a/users/vitoni/vitoni.c b/users/vitoni/vitoni.c new file mode 100644 index 0000000000..2a0ff5c46f --- /dev/null +++ b/users/vitoni/vitoni.c @@ -0,0 +1,131 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "vitoni.h" + +#include <rgb_matrix.h> +#include <lib/lib8tion/lib8tion.h> + +#include "rgb_matrix_effects.h" +#include "utils.h" + +#if defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) +static uint8_t state; + +// flag used to indicate that offset calculation is needed to adjust the timer, +// so that it matches the index used for sine calculation +static bool calc_offset; + +void matrix_scan_user_rgb(void) { +#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT) + const uint8_t time = rgb_time_2_scale(); +#endif + static uint8_t time_offset; + + const uint32_t inactivity_millis = last_input_activity_elapsed(); + +#if defined(RGB_IDLE_TIMEOUT) + if (IDLE != state && RGB_IDLE_TIMEOUT <= inactivity_millis) { + update_value(&state, IDLE_FADE_OUT, &calc_offset); + } +#endif +#if defined(RGB_DISABLE_WITH_FADE_OUT) + const uint32_t fade_out_duration = scale_2_rgb_time(128); + const uint32_t start_fade_out_after_millis = (RGB_DISABLE_TIMEOUT) > fade_out_duration + ? (RGB_DISABLE_TIMEOUT) - fade_out_duration + : 0; + + if (start_fade_out_after_millis <= inactivity_millis) { + update_value(&state, FADE_OUT, &calc_offset); + } +#elif defined(RGB_DISABLE_TIMEOUT) + // having to set brightness "manually" to black as starting point for fade in + // for the time when returning from suspended state + if (RGB_DISABLE_TIMEOUT <= inactivity_millis + 15) { + rgb_matrix_config.hsv.v = 0; + state = SUSPENDED; + } +#endif + + switch(state) { +#if defined(RGB_IDLE_TIMEOUT) + case IDLE_FADE_OUT: + if (calc_offset) { + time_offset = calc_fade_out_offset(time); + + // resetting flag for subsequent calls + calc_offset = false; + } + if (idle_fade_out(time + time_offset)) { + update_value(&state, IDLE, &calc_offset); + } + break; + case IDLE: +#if defined(RGB_IDLE_BREATHE) + if (calc_offset) { + // no need to calculate time_offset since we are aligned already due to IDLE_FADE_OUT + // resetting flag for subsequent calls + calc_offset = false; + } + idle_breathe(time + time_offset); +#endif + break; +#endif +#if defined(RGB_DISABLE_WITH_FADE_OUT) + case FADE_OUT: + if (calc_offset) { + time_offset = calc_fade_out_offset(time); + + // resetting flag for subsequent calls + calc_offset = false; + } + if (fade_out(time + time_offset)) { + update_value(&state, SUSPENDED, &calc_offset); + } + break; +#endif +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) + case FADE_IN: + { + // since we want to be active, fade in should be faster than e.g. fading out + const uint8_t fade_in_time = rgb_time_2_scale_w_factor(4); + if (calc_offset) { + time_offset = calc_fade_in_offset(fade_in_time); + + // resetting flag for subsequent calls + calc_offset = false; + } + if (fade_in(fade_in_time + time_offset)) { + update_value(&state, REGULAR, &calc_offset); + } + } + break; +#endif + default: + break; + } +} + +#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT) +bool process_record_user_rgb(const uint16_t keycode, const keyrecord_t *record) { + // if we are in a non regular state we might have faded out (eventually partially) + // so we restore brightness (to max as we don't keep track of manually changed brightness) + // if (REGULAR != state && FADE_IN != state) { + if (FADE_IN != state && REGULAR != state) { + update_value(&state, FADE_IN, &calc_offset); + } + + return true; // Process all other keycodes normally +} + +void suspend_wakeup_init_user(void) { + if (FADE_IN != state) { + // setting brightness to black as starting point for fade in + rgb_matrix_config.hsv.v = 0; + + update_value(&state, FADE_IN, &calc_offset); + } +} +#endif // defined(RGB_FADE_IN) + +#endif // defined(RGB_FADE_IN) || defined(RGB_DISABLE_WITH_FADE_OUT) diff --git a/users/vitoni/vitoni.h b/users/vitoni/vitoni.h new file mode 100644 index 0000000000..1f26037135 --- /dev/null +++ b/users/vitoni/vitoni.h @@ -0,0 +1,30 @@ +// Copyright 2021 Victor Toni (@vitoni) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +#include <quantum/action.h> + +#include "rgb_matrix_effects.h" + +/** + * @brief Executes periodic tasks, eg. fading or checking for upcoming supend. + * @details Function declaration as weak as the implementation might "disappear" depending on the RGB settings used. + * The weak declaration avoids having to change `keymap.c`. + */ +__attribute__((weak)) +void matrix_scan_user_rgb(void); + +/** + * @brief Executes tasks based on user activity, eg. fading in. + * @details Function declaration as weak as the implementation might "disappear" depending on the RGB settings used. + * The weak declaration avoids having to change `keymap.c`. + * @param[in] keycode + * @param[in] record + * @return `false` if further processing should be stopped, `true` otherwise + */ +__attribute__((weak)) +bool process_record_user_rgb(const uint16_t keycode, const keyrecord_t *record); diff --git a/util/update_chibios_mirror.sh b/util/update_chibios_mirror.sh index 0bf648ebfd..e6666c55c9 100755 --- a/util/update_chibios_mirror.sh +++ b/util/update_chibios_mirror.sh @@ -4,13 +4,13 @@ # Configuration # The ChibiOS branches to mirror -chibios_branches="trunk stable_20.3.x stable_21.6.x" +chibios_branches="trunk stable_20.3.x stable_21.11.x" # The ChibiOS tags to mirror -chibios_tags="ver20.3.1 ver20.3.2 ver20.3.3 ver20.3.4 ver21.6.0" +chibios_tags="ver20.3.1 ver20.3.2 ver20.3.3 ver20.3.4 ver21.11.1" # The ChibiOS-Contrib branches to mirror -contrib_branches="chibios-20.3.x chibios-21.6.x" +contrib_branches="chibios-20.3.x chibios-21.11.x" ################################ # Actions @@ -88,5 +88,5 @@ echo "Updating ChibiOS-Contrib branches..." for branch in $contrib_branches ; do echo "Creating branch 'mirror/$branch' from 'upstream/$branch'..." git branch -f mirror/$branch upstream/$branch \ - && git push qmk mirror/$branch + && git push qmk mirror/$branch || true # Allow for nonexistent ChibiOS-Contrib branches -- they'll turn up eventually. done |