diff options
| -rw-r--r-- | keyboards/meira/keymaps/grahampheath/keymap.c | 34 | ||||
| -rw-r--r-- | keyboards/planck/keymaps/grahampheath/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/telophase/config.h | 87 | ||||
| -rw-r--r-- | keyboards/telophase/keymaps/default/keymap.c | 104 | ||||
| -rw-r--r-- | keyboards/telophase/matrix.c | 164 | ||||
| -rw-r--r-- | keyboards/telophase/readme.md | 16 | ||||
| -rw-r--r-- | keyboards/telophase/rules.mk | 75 | ||||
| -rw-r--r-- | keyboards/telophase/telophase.c | 41 | ||||
| -rw-r--r-- | keyboards/telophase/telophase.h | 67 | ||||
| -rw-r--r-- | layouts/community/ortho_4x12/grahampheath/config.h | 39 | ||||
| -rw-r--r-- | layouts/community/ortho_4x12/grahampheath/keymap.c | 287 | ||||
| -rw-r--r-- | layouts/community/ortho_4x12/grahampheath/rules.mk | 3 |
12 files changed, 901 insertions, 18 deletions
diff --git a/keyboards/meira/keymaps/grahampheath/keymap.c b/keyboards/meira/keymaps/grahampheath/keymap.c index 6a4b9333c7..69815ef975 100644 --- a/keyboards/meira/keymaps/grahampheath/keymap.c +++ b/keyboards/meira/keymaps/grahampheath/keymap.c @@ -61,10 +61,10 @@ enum custom_keycodes { bool TOG_STATUS = false; int RGB_current_mode; -#define KC_X0 MT(MOD_LCTL, KC_ESC) // Hold for Left Ctrl, Tap for ESC +#define KC_X0 MT(MOD_LCTL, KC_ESC) // Hold for Left Ctrl, Tap for GraveESC #define KC_X1 MT(MOD_RSFT, KC_ENT) // Hold for Right Shift, Tap for Enter #define KC_X2 MT(MOD_RSFT, LGUI(KC_ENT)) // Send Command Enter -#define KC_X3 MT(KC_LGUI, KC_SPC) // Hold for Left GUI, Tap for Space +#define KC_X3 MT(MOD_LGUI, KC_SPC) // Hold for Left GUI, Tap for Space #define KC_EMOJ TT(_EMOJI) // Hold for Emoji Layer, or tap 5 times. #define KC_QS LGUI(KC_SPC) // Send Command + Space (for QuickSilver). #define KC_TABR LGUI(KC_RCBR) // Send Command + } (for tab changing). @@ -82,7 +82,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------+------+------+------+------+------| * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Emoji |Adjust| Ctrl | Alt |Lower | Cmd |Space |Raise | Left | Down | Up |Right | + * |Emoji | Ctrl | Alt |Lower | Cmd |Space+|Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ [_QWERTY] = KEYMAP( \ @@ -130,15 +130,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Emoji Layer * - * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ - * │HYPR0│ │ ;-) │ │ │ :-P │ │ │:'-( │FLIP │ │ │ - * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - * │HYPR1│ 👆 │SHRUG│ │ :-( │ │ <3 │ :-) │ │LLAP │ │ │ - * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ - * │HYPR2│ │ │ | :-\ │ │ │ :-D │ SHIT│ │ │ │ - * ├─────┼─────┼─────┼─────┼─────┼─────┴─────┼─────┼─────┼─────┼─────┼─────┤ - * │ │ │ │ │Brig-│ Sleep │Brig+│ 👈 │ 👎 | 👍 │ 👉 │ - * └─────┴─────┴─────┴─────┴─────┴───────────┴─────┴─────┴─────┴─────┴─────┘ + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │HYPR0│ │ ;-) │ │ │ :-P │ │ │:'-( │FLIP │ │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + * │HYPR1│ 👆 │SHRUG│ │ :-( │ │ <3 │ :-) │ │LLAP │ │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + * │HYPR2│ │ │ | :-\ │ │ │ :-D │ SHIT│ │ │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┴─────┼─────┼─────┼─────┼─────┼─────┤ + * │ │ │ │ │Brig-│ Sleep │Brig+│ 👈 │ 👎 | 👍 │ 👉 │ + * └─────┴─────┴─────┴─────┴─────┴───────────┴─────┴─────┴─────┴─────┴─────┘ */ [_EMOJI] = KEYMAP ( \ HYPR_0, _______, WINK, _______, _______, TOUNGE, _______, _______, CRY, FLIP, _______, _______, \ @@ -151,20 +151,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Lower * ,-----------------------------------------------------------------------------------. - * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ~ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | * |------+------+------+------+------+------|------+------+------+------+------+------| * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Tab- | Vol- | Vol+ | Tab+ | + * | | | | | | | | Tab- | | | Tab+ | * `-----------------------------------------------------------------------------------' */ [_LOWER] = KEYMAP( \ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ - _______, _______, _______, _______, _______, KC_QS, KC_QS, _______, KC_TABL, THMBDN, THMBUP, KC_TABR \ + _______, _______, _______, _______, _______, KC_QS, KC_QS, _______, KC_TABL, _______, _______, KC_TABR \ ), /* Raise @@ -197,7 +197,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = KEYMAP( \ - _______, RESET, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, _______, _______, _______, KC_DEL, \ + _______, RESET, _______, _______, _______, _______, KC_PSCR, _______, _______, _______, _______, KC_DEL, \ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ diff --git a/keyboards/planck/keymaps/grahampheath/readme.md b/keyboards/planck/keymaps/grahampheath/readme.md index 507120c6f1..ec8020f18c 100644 --- a/keyboards/planck/keymaps/grahampheath/readme.md +++ b/keyboards/planck/keymaps/grahampheath/readme.md @@ -1,4 +1,4 @@ # Graham's Planck ## Sounds -I've added a [8ohm 0.5W speaker](http://a.co/6MIKZSy), its a bit large, but it fits in approximately the same space as the ProMicro. I soldered to the pcb hole labeled PC6 on my Rev 3 Planck PCB, and GND on the near by chip. [Pic of an identical mod](https://i1.sndcdn.com/artworks-000128070066-myh0ls-t500x500.jpg) (not mine). +I've added a [8ohm 0.5W speaker](http://a.co/6MIKZSy), its a bit large, but it fits in approximately the same space as the ProMicro. I soldered to the pcb hole labeled PC6 on my Rev 3 Planck PCB, and GND on the near by chip. [Pic of an identical mod][https://i1.sndcdn.com/artworks-000128070066-myh0ls-t500x500.jpg] (not mine). diff --git a/keyboards/telophase/config.h b/keyboards/telophase/config.h new file mode 100644 index 0000000000..09655c0258 --- /dev/null +++ b/keyboards/telophase/config.h @@ -0,0 +1,87 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER unknown +#define PRODUCT Telophase +#define DESCRIPTION q.m.k. keyboard firmware for Telophase + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +#define ONESHOT_TIMEOUT 500 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +#define PREVENT_STUCK_MODIFIERS + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +//UART settings for communication with the RF microcontroller +#define SERIAL_UART_BAUD 1000000 +#define SERIAL_UART_DATA UDR1 +#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) +#define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX and RX */ \ + UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + } while(0) + +#endif diff --git a/keyboards/telophase/keymaps/default/keymap.c b/keyboards/telophase/keymaps/default/keymap.c new file mode 100644 index 0000000000..1e692ba12d --- /dev/null +++ b/keyboards/telophase/keymaps/default/keymap.c @@ -0,0 +1,104 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include "telophase.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum telophase_layers +{ + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum telophase_keycodes +{ + LOWER = SAFE_RANGE, + RAISE, + ADJUST +}; + +#define LONGPRESS_DELAY 150 +#define LAYER_TOGGLE_DELAY 300 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[_QWERTY] = { /*QWERTY*/ + {KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, + {KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {KC_LCTL, KC_LGUI, KC_LALT, ADJUST, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT } +}, + + +[_LOWER] = { /*Lower*/ + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL }, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE }, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______ }, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY } +}, + + + +[_RAISE] = { /*Raise*/ + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL }, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS }, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______ }, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY } + +}, + + +[_ADJUST] = { /*Adjust*/ + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ }, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ } + +}, +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + } else { + layer_off(_LOWER); + } + return false; + break; + + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + } else { + layer_off(_RAISE); + } + return false; + break; + + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + + } + return true; +} + +void matrix_scan_user(void) { + return; +}; + diff --git a/keyboards/telophase/matrix.c b/keyboards/telophase/matrix.c new file mode 100644 index 0000000000..b3544453e7 --- /dev/null +++ b/keyboards/telophase/matrix.c @@ -0,0 +1,164 @@ +/* +Copyright 2012 Jun Wako +Copyright 2014 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#if defined(__AVR__) +#include <avr/io.h> +#endif +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "timer.h" + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#elif (MATRIX_COLS <= 16) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop16(matrix[i]) +# define ROW_SHIFTER ((uint16_t)1) +#elif (MATRIX_COLS <= 32) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop32(matrix[i]) +# define ROW_SHIFTER ((uint32_t)1) +#endif + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) { + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) { + return MATRIX_COLS; +} + +void matrix_init(void) { + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) +{ + SERIAL_UART_INIT(); + + uint32_t timeout = 0; + + //the s character requests the RF slave to send the matrix + SERIAL_UART_DATA = 's'; + + //trust the external keystates entirely, erase the last data + uint8_t uart_data[13] = {0}; + + //there are 12 bytes corresponding to 12 columns, and an end byte + for (uint8_t i = 0; i < 13; i++) { + //wait for the serial data, timeout if it's been too long + //this only happened in testing with a loose wire, but does no + //harm to leave it in here + while(!SERIAL_UART_RXD_PRESENT){ + timeout++; + if (timeout > 10000){ + break; + } + } + uart_data[i] = SERIAL_UART_DATA; + } + + //check for the end packet, the key state bytes use the LSBs, so 0xE0 + //will only show up here if the correct bytes were recieved + if (uart_data[11] == 0xE0) + { + //shifting and transferring the keystates to the QMK matrix variable + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; + } + } + + + matrix_scan_quantum(); + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print_matrix_header(); + + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + print_matrix_row(row); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += matrix_bitpop(i); + } + return count; +} diff --git a/keyboards/telophase/readme.md b/keyboards/telophase/readme.md new file mode 100644 index 0000000000..86b29d01d6 --- /dev/null +++ b/keyboards/telophase/readme.md @@ -0,0 +1,16 @@ +Telophase +========= + +A wireless split compact keyboard. + +Hardware Supported: Telophase PCB + +Make example for this keyboard (after setting up your build environment): + + make telophase:default + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. + +## Mitosis Notes + +These configuration files were based off the Atreus keyboard. It assumes a Pro Micro is being used, however retains the 'make upload' feature from the Atreus branch. This keyboard uses a completely different 'matrix scan' system to other keyboards, it relies on an external nRF51822 microcontroller maintaining a matrix of keystates received from the keyboard halves. The matrix.c file contains the code to poll the external microcontroller for the key matrix. As long as this file is not changed, all other QMK features are supported. diff --git a/keyboards/telophase/rules.mk b/keyboards/telophase/rules.mk new file mode 100644 index 0000000000..cfaf58e3d0 --- /dev/null +++ b/keyboards/telophase/rules.mk @@ -0,0 +1,75 @@ + +OPT_DEFS += -DMITOSIS_PROMICRO +MITOSIS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) + +# # project specific files +SRC = matrix.c + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = YES # MIDI controls +UNICODE_ENABLE = YES # Unicode +# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID +LAYOUTS = ortho_4x12 +USB = /dev/ttyACM0 + +# upload: build +# $(MITOSIS_UPLOAD_COMMAND) diff --git a/keyboards/telophase/telophase.c b/keyboards/telophase/telophase.c new file mode 100644 index 0000000000..c77a43389f --- /dev/null +++ b/keyboards/telophase/telophase.c @@ -0,0 +1,41 @@ +#include "telophase.h" + +void uart_init(void) { + SERIAL_UART_INIT(); +} + +void led_init(void) { + DDRD |= (1<<1); + PORTD |= (1<<1); + DDRF |= (1<<4) | (1<<5); + PORTF |= (1<<4) | (1<<5); +} + + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + uart_init(); + led_init(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +} + +void led_set_kb(uint8_t usb_led) { + +} + +#ifdef SWAP_HANDS_ENABLE +__attribute__ ((weak)) +const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { +{{12, 0}, {11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, +{{12, 1}, {11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, +{{12, 2}, {11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, +{{12, 3}, {11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}, +}; +#endif diff --git a/keyboards/telophase/telophase.h b/keyboards/telophase/telophase.h new file mode 100644 index 0000000000..aae4fc3d48 --- /dev/null +++ b/keyboards/telophase/telophase.h @@ -0,0 +1,67 @@ +#ifndef TELOPHASE_H +#define TELOPHASE_H + +#include "quantum.h" +#include "matrix.h" +#include "backlight.h" +#include <stddef.h> + +#define red_led_off PORTF |= (1<<5) +#define red_led_on PORTF &= ~(1<<5) +#define blu_led_off PORTF |= (1<<4) +#define blu_led_on PORTF &= ~(1<<4) +#define grn_led_off PORTD |= (1<<1) +#define grn_led_on PORTD &= ~(1<<1) + +#define set_led_off red_led_off; grn_led_off; blu_led_off +#define set_led_red red_led_on; grn_led_off; blu_led_off +#define set_led_blue red_led_off; grn_led_off; blu_led_on +#define set_led_green red_led_off; grn_led_on; blu_led_off +#define set_led_yellow red_led_on; grn_led_on; blu_led_off +#define set_led_magenta red_led_on; grn_led_off; blu_led_on +#define set_led_cyan red_led_off; grn_led_on; blu_led_on +#define set_led_white red_led_on; grn_led_on; blu_led_on + +/* +#define LED_B 5 +#define LED_R 6 +#define LED_G 7 + +#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) + +#define red_led_on PORTF |= (1<<LED_R) +#define red_led_off PORTF &= ~(1<<LED_R) +#define grn_led_on PORTF |= (1<<LED_G) +#define grn_led_off PORTF &= ~(1<<LED_G) +#define blu_led_on PORTF |= (1<<LED_B) +#define blu_led_off PORTF &= ~(1<<LED_B) + +#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) +#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R) +#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B) +#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G) +#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G) +#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B) +#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G) +#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G) +*/ + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \ + k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \ + k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \ + k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11 }, \ + { k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23 }, \ + { k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35 }, \ + { k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 }, \ +} + +#define LAYOUT_ortho_4x12 LAYOUT + +#endif diff --git a/layouts/community/ortho_4x12/grahampheath/config.h b/layouts/community/ortho_4x12/grahampheath/config.h new file mode 100644 index 0000000000..21d647921c --- /dev/null +++ b/layouts/community/ortho_4x12/grahampheath/config.h @@ -0,0 +1,39 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#define FLIP_HALF + +#include "keyboards/lets_split/config.h" + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#endif diff --git a/layouts/community/ortho_4x12/grahampheath/keymap.c b/layouts/community/ortho_4x12/grahampheath/keymap.c new file mode 100644 index 0000000000..e2421e9a7e --- /dev/null +++ b/layouts/community/ortho_4x12/grahampheath/keymap.c @@ -0,0 +1,287 @@ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +enum custom_layers { + _QWERTY, + _LOWER, + _RAISE, + _EMOJI, +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + EMOJI, + ABOVE, + BUG, + CONFUSED, + CRY, + CLAP, + FLIP, + FNGLEFT, + FNGRIGHT, + FROWN, + GRIN, + HEART, + JOY, + LLAP, + ROFL, + SHIT, + SING, + SHRUG, + THINK, + THMBDN, + THMBUP, + TOUNGE, + WINK +}; + +#define KC_X0 MT(MOD_LCTL, KC_ESC) // Hold for Left Ctrl, Tap for GraveESC +#define KC_X1 MT(MOD_RSFT, KC_ENT) // Hold for Right Shift, Tap for Enter +#define KC_X2 MT(MOD_RSFT, LGUI(KC_ENT)) // Send Command Enter +#define KC_BACK LGUI(KC_LBRC) // Back +#define KC_FORWARD LGUI(KC_RBRC) // Forward +#define KC_EMOJ TT(_EMOJI) // Hold for Emoji Layer, or tap 5 times. +#define KC_QS LGUI(KC_SPC) // Send Command + Space (for QuickSilver). +#define KC_WTAB LGUI(KC_TILD) // Send Command + ~ (for window changing). +#define KC_TABR LGUI(KC_RCBR) // Send Command + } (for tab changing). +#define KC_TABL LGUI(KC_LCBR) // Send Command + { (for tab changing). +#define HYPR_0 HYPR(KC_TILD) // Send Hyper + ~. +#define HYPR_1 HYPR(KC_EXLM) // Send Hyper + !. +#define HYPR_2 HYPR(KC_AT) // Send Hyper + @. + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Emoji | Ctrl | Alt |Lower | Cmd |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_X0, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_X1, + KC_EMOJ, KC_LCTL, KC_LALT, KC_LGUI, MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * |cmd(~)| <- | -> | TAB_L| TAB_R| F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Tab- | Vol- | Vol+ | Tab+ | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_ortho_4x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_WTAB, KC_BACK, KC_FORWARD, KC_TABL, KC_TABR, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), _______, _______, _______, + _______, _______, _______, _______, _______, KC_QS, KC_QS, _______, _______, _______, _______, _______ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * |cmd(~)| F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Home | PgUp | PgDn | End | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_ortho_4x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_WTAB, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_X2, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END +), + +/* Emoji Layer + * ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ + * │HYPR0│ Q │ ;-) │ E │ 🤣 │ :-P │ Y │ U │:'-( │FLIP │ P │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + * │HYPR1│ 👆 │SHRUG│ GRIN│ :-( │ G │ <3 │ :-) │ k │LLAP │ ; │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤ + * │HYPR2│🎶^🎶│💭^💭│ 👏 | :-\ │ 🐛 │ n │ :-D │ SHIT│ . │ / │ │ + * ├─────┼─────┼─────┼─────┼─────┼─────┴─────┼─────┼─────┼─────┼─────┼─────┤ + * │ │ │ │ │Brig-│ Sleep │Brig+│ 👈 │ 👎 | 👍 │ 👉 │ + * └─────┴─────┴─────┴─────┴─────┴───────────┴─────┴─────┴─────┴─────┴─────┘ + */ +[_EMOJI] = LAYOUT_ortho_4x12( + HYPR_0, _______, WINK, _______, ROFL, TOUNGE, _______, _______, CRY, FLIP, _______, _______ , + HYPR_1, ABOVE, SHRUG, GRIN, FROWN, _______, HEART, JOY, _______, LLAP, _______, _______ , + HYPR_2, SING, THINK, CLAP, CONFUSED, BUG, _______, _______, SHIT, _______, _______, _______ , + _______, _______, _______, _______, KC_SLCK, KC_SLEP, KC_SLEP, KC_PAUS, FNGLEFT, THMBDN, THMBUP, FNGRIGHT +), +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistent_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case ABOVE: + if (record->event.pressed) { + SEND_STRING("&above; "); + } + return false; + break; + case BUG: + if (record->event.pressed) { + SEND_STRING("&bug;"); + } + return false; + break; + case CONFUSED: + if (record->event.pressed) { + SEND_STRING(":-\\"); + } + return false; + break; + case CRY: + if (record->event.pressed) { + SEND_STRING(":'-( "); + } + return false; + break; + case CLAP: + if (record->event.pressed) { + SEND_STRING("&clap; "); + } + return false; + break; + case FLIP: + if (record->event.pressed) { + SEND_STRING("&fliptable;"); + } + return false; + break; + case FNGLEFT: + if (record->event.pressed) { + SEND_STRING("&fingerleft; "); + } + return false; + break; + case FNGRIGHT: + if (record->event.pressed) { + SEND_STRING("&fingerright; "); + } + return false; + break; + case FROWN: + if (record->event.pressed) { + SEND_STRING(":-( "); + } + return false; + break; + case GRIN: + if (record->event.pressed) { + SEND_STRING(":-D "); + } + return false; + break; + case HEART: + if (record->event.pressed) { + SEND_STRING("<3 "); + } + return false; + break; + case JOY: + if (record->event.pressed) { + SEND_STRING(":-) "); + } + return false; + break; + case LLAP: + if (record->event.pressed) { + SEND_STRING("&llap; "); + } + return false; + break; + case ROFL: + if (record->event.pressed) { + SEND_STRING("&rofl; "); + } + return false; + break; + case SHIT: + if (record->event.pressed) { + SEND_STRING("&shit; "); + } + return false; + break; + case SING: + if (record->event.pressed) { + SEND_STRING("_sing_"); + } + return false; + break; + case SHRUG: + if (record->event.pressed) { + SEND_STRING("&shrug; "); + } + return false; + break; + case THINK: + if (record->event.pressed) { + SEND_STRING("_think_"); + } + return false; + break; + case THMBDN: + if (record->event.pressed) { + SEND_STRING("&thumbdown; "); + } + return false; + break; + case THMBUP: + if (record->event.pressed) { + SEND_STRING("&thumbup; "); + } + return false; + break; + case TOUNGE: + if (record->event.pressed) { + SEND_STRING(":-P "); + } + return false; + break; + case WINK: + if (record->event.pressed) { + SEND_STRING(";-) "); + } + return false; + break; + + } + return true; +} + +void matrix_scan_user(void) { + return; +}; + diff --git a/layouts/community/ortho_4x12/grahampheath/rules.mk b/layouts/community/ortho_4x12/grahampheath/rules.mk new file mode 100644 index 0000000000..457a3d01d4 --- /dev/null +++ b/layouts/community/ortho_4x12/grahampheath/rules.mk @@ -0,0 +1,3 @@ +ifndef QUANTUM_DIR + include ../../../../Makefile +endif |