diff options
| -rw-r--r-- | converter/terminal_bluefruit/Makefile | 113 | ||||
| -rw-r--r-- | converter/terminal_bluefruit/README | 37 | ||||
| -rw-r--r-- | converter/terminal_bluefruit/config.h | 112 | ||||
| -rw-r--r-- | converter/terminal_bluefruit/keymap.c | 227 | ||||
| -rw-r--r-- | converter/terminal_bluefruit/led.c | 35 | ||||
| -rw-r--r-- | converter/terminal_bluefruit/matrix.c | 262 | ||||
| -rw-r--r-- | protocol/bluefruit.mk | 27 | ||||
| -rw-r--r-- | protocol/bluefruit/bluefruit.c | 202 | ||||
| -rw-r--r-- | protocol/bluefruit/bluefruit.h | 28 | ||||
| -rw-r--r-- | protocol/bluefruit/main.c | 116 |
10 files changed, 1159 insertions, 0 deletions
diff --git a/converter/terminal_bluefruit/Makefile b/converter/terminal_bluefruit/Makefile new file mode 100644 index 0000000000..83d68fc252 --- /dev/null +++ b/converter/terminal_bluefruit/Makefile @@ -0,0 +1,113 @@ +# Target file name (without extension). +TARGET = terminal_bluefruit + +# Directory common source filess exist +TOP_DIR = ../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = keymap.c \ + matrix.c \ + led.c + +CONFIG_H = config.h + +BLUEFRUIT_TRACE_SERIAL=true + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA + + +# +# PS/2 protocol implementations +# USART is recommended if it is available, others are for reference purpose. +# INT implementation will drop simultaneous key strokes. +# +#PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened) +PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin +#PS2_USE_BUSYWAIT = yes # uses primitive reference code + +ifdef PS2_USE_USART + SRC += protocol/ps2_usart.c + OPT_DEFS += -DPS2_USE_USART +endif + +ifdef PS2_USE_INT + SRC += protocol/ps2.c + OPT_DEFS += -DPS2_USE_INT +endif + +ifdef PS2_USE_BUSYWAIT + SRC += protocol/ps2.c + OPT_DEFS += -DPS2_USE_BUSYWAIT +endif + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) + + +include $(TOP_DIR)/protocol/bluefruit.mk +include $(TOP_DIR)/protocol.mk +include $(TOP_DIR)/common.mk +include $(TOP_DIR)/rules.mk diff --git a/converter/terminal_bluefruit/README b/converter/terminal_bluefruit/README new file mode 100644 index 0000000000..6ff1bc92f3 --- /dev/null +++ b/converter/terminal_bluefruit/README @@ -0,0 +1,37 @@ +Keyboard converter for IBM terminal keyboard +============================================ +It supports PS/2 Scan Code Set 3 and runs on USB AVR chips such like PJRC Teensy. +I tested the converter on ATMega32U4 with 1392595(102keys) and 6110345(122keys). + +Source code: https://github.com/tmk/tmk_keyboard +Article: http://geekhack.org/index.php?topic=27272.0 + + +CONNECTION +---------- +Keyboard ATMega32U4 +---------------------- +Data: PD2 +Clock: PD5 + +And VCC and GND, of course. See RESOURCE for keyboard connector pin assign. + + +BUILD +----- +$ git clone https://github.com/tmk/tmk_keyboard.git +$ cd converter/terminal_usb +$ make + + +RESOURCE +-------- +Soarer's Converter: http://geekhack.org/index.php?topic=17458.0 +102keys(1392595): http://geekhack.org/index.php?topic=10737.0 +122keys(1390876): http://www.seasip.info/VintagePC/ibm_1390876.html +KbdBabel: http://www.kbdbabel.org/ +RJ45 Connector: http://www.kbdbabel.org/conn/kbd_connector_ibmterm.png +DIN Connector: http://www.kbdbabel.org/conn/kbd_connector_ibm3179_318x_319x.png +WinAVR: http://winavr.sourceforge.net/ + +EOF diff --git a/converter/terminal_bluefruit/config.h b/converter/terminal_bluefruit/config.h new file mode 100644 index 0000000000..8bf139d35f --- /dev/null +++ b/converter/terminal_bluefruit/config.h @@ -0,0 +1,112 @@ +/* +Converter for 70% IBM Terminal Keyboard +Author: Benjamin Gould, 2013 +Based on code Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6535 +#define DEVICE_VER 0x0100 +#define MANUFACTURER t.m.k. +#define PRODUCT 70% IBM Terminal Keyboard Converter w/ Bluetooth +#define DESCRIPTION USB converter for IBM Terminal Keyboard w/ Bluetooth + + +/* matrix size */ +#define MATRIX_ROWS 17 // keycode bit: 3-0 +#define MATRIX_COLS 8 // keycode bit: 6-4 + + +/* legacy keymap support */ +// #define USE_LEGACY_KEYMAP + + +/* key combination for command */ +#define IS_COMMAND() ( \ + (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) || \ + (keyboard_report->mods == (MOD_BIT(KC_RALT) | MOD_BIT(KC_RCTL))) \ +) + +/* USART configuration + * asynchronous, 9600baud, 8-data bit, non parity, 1-stop bit, no flow control + */ +#ifdef __AVR_ATmega32U4__ + #define SERIAL_UART_BAUD 9600 + #define SERIAL_UART_DATA UDR1 + #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1) + #define SERIAL_UART_RXD_VECT USART1_RX_vect + #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1)) + #define SERIAL_UART_INIT() do { \ + UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \ + UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \ + UCSR1B = (1<<TXEN1); /* TX: enable */ \ + UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \ + (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \ + sei(); \ + } while(0) +#else +# error "USART configuration is needed." +#endif + +/* + * PS/2 Interrupt configuration + */ +#ifdef PS2_USE_INT +/* uses INT1 for clock line(ATMega32U4) */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 1 + +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 0 + +#define PS2_INT_INIT() do { \ + EICRA |= ((1<<ISC11) | \ + (0<<ISC10)); \ +} while (0) +#define PS2_INT_ON() do { \ + EIMSK |= (1<<INT1); \ +} while (0) +#define PS2_INT_OFF() do { \ + EIMSK &= ~(1<<INT1); \ +} while (0) +#define PS2_INT_VECT INT1_vect +#endif + + +/* + * PS/2 Busywait configuration + */ +#ifdef PS2_USE_BUSYWAIT +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 1 + +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 0 +#endif + +#endif diff --git a/converter/terminal_bluefruit/keymap.c b/converter/terminal_bluefruit/keymap.c new file mode 100644 index 0000000000..716590a456 --- /dev/null +++ b/converter/terminal_bluefruit/keymap.c @@ -0,0 +1,227 @@ +/* +Converter for 70% IBM Terminal Keyboard +Author: Benjamin Gould, 2013 +Based on code Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/pgmspace.h> +#include "keycode.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "keymap.h" + + + + +/* + * IBM Terminal keyboard 6110345(122keys)/1392595(102keys) + * http://geekhack.org/showthread.php?10737-What-Can-I-Do-With-a-Terminal-Model-M + * http://www.seasip.info/VintagePC/ibm_1391406.html + * + * Keymap array: + * 8 bytes + * +---------+ + * 0| | + * :| | 0x00-0x87 + * ;| | + * 17| | + * +---------+ + */ +#define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{ \ + { KC_NO, KC_##K01, KC_NO, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ + { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ + { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ + { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ + { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \ + { KC_##K50, KC_##K51, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ + { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_##K5C, KC_##K5D, KC_##K5E, KC_##K5F }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ + { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_##K6D, KC_##K6E, KC_##K6F }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \ + { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_##K83, KC_##K84, KC_NO, KC_NO, KC_NO, }, \ +} + +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* 0: default + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| + * `---' `---------------' `---------------' `---------------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \|BS | |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | + * |-----------------------------------------------------------| `-----------' |-----------| +| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '| #|Retu| | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shif| \| Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------|Ent| + * |Ctrl| |Alt | Space |Alt | |Ctrl| |Lef|Dow|Rig| | 0| .| | + * `----' `---------------------------------------' `----' `-----------' `---------------' + */ +/* + KEYMAP( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, + + PSCR,ESC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + SLCK,INT4, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, + PAUS,INT5, CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, UP, P4, P5, P6, PCMM, + APP, INT6, LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, LEFT,INT2,RGHT, P1, P2, P3, PENT, + RGUI,LGUI, LCTL, LALT, SPC, RALT, RCTL, DOWN, NO, P0, PDOT,NO + ), +*/ + /* + KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS + ), + */ + // pseudo ANSI + + KEYMAP( + FN0, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, + PSCR,PAUS,PGUP,PGDN,HOME,END, INS, DEL, LEFT,DOWN,UP, RGHT, + + NO, NO, ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, GRV, BSPC, NO, NO, NO, NO, NO, NO, NO, + NO, NO, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, NO, NO, NO, NO, NO, NO, NO, + NO, NO, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, BSLS,ENT, NO, NO, NO, NO, NO, + NO, NO, LSFT,FN1 ,Z, X, C, V, B, N, M, COMM,DOT, SLSH, FN1, RSFT, NO, NO, NO, NO, NO, NO, NO, + NO, NO, LCTL, LALT, SPC, LGUI, APP, NO, NO, NO, NO, NO + ), + + // Momentary Function Layer + KEYMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,MUTE,VOLD,VOLU,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + + TRNS,TRNS, TRNS,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,HOME,UP ,END, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,MS_L,MS_D,MS_U,MS_R,LEFT,DOWN, RGHT,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,PGDN,TRNS, TRNS,RSFT, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, BTN2, TRNS, BTN1, RALT, RCTL, TRNS, TRNS,TRNS,TRNS,TRNS + ), + + // Mouse Layer + KEYMAP( + FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO, + TRNS,TRNS, TRNS,NO, NO, MS_U,NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO, + TRNS,TRNS, BTN2,BTN1,MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,NO, NO, NO, ENT, NO, NO, NO, NO, NO, + TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO, + TRNS,TRNS, TRNS, TRNS, BTN1, BTN2, TRNS, NO, NO, NO, NO, NO + ), + + // vi Layer + KEYMAP( + FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,NO, TRNS, NO, NO, NO, NO, NO, NO, NO, + TRNS,TRNS, TRNS,HOME,PGDN,UP, PGUP,END, HOME,PGDN,PGUP,END, NO, NO, NO, TRNS, NO, NO, NO, NO, NO, NO, NO, + TRNS,TRNS, TRNS,NO, LEFT,DOWN,RGHT,NO, LEFT,DOWN,UP, RGHT,NO, NO, NO, ENT, NO, NO, NO, NO, NO, + TRNS,TRNS, TRNS,TRNS,NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, NO, RSFT, NO, NO, NO, NO, NO, NO, NO, + TRNS,TRNS, TRNS, TRNS, SPC, RALT, RCTL, NO, NO, NO, NO, NO + ), + + // num lock layer + KEYMAP( + FN0, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS,TRNS,TRNS,TRNS + ), + +}; + + +static const uint16_t fn_actions[] PROGMEM = { + [0] = ACTION_DEFAULT_LAYER_SET(0), + [1] = ACTION_LAYER_MOMENTARY(1), + [2] = ACTION_LAYER_MOMENTARY(2), //ACTION_LAYER_ON(2, ON_RELEASE), + [3] = KC_NO, //ACTION_LAYER_ON(3, ON_RELEASE), + [4] = KC_NO, //ACTION_LAYER_ON(4, ON_RELEASE), + [5] = KC_NO, + [6] = KC_NO, + [7] = KC_NO, +}; + +/* +enum macro_id { + MS_UL, + MS_UR, + MS_DL, + MS_DR, +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + keyevent_t event = record->event; + + switch (id) { + case MS_UL: + return (event.pressed ? MACRO( D(MS_L), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) ); + case MS_UR: + return (event.pressed ? MACRO( D(MS_R), D(MS_U), END ) : MACRO( U(MS_L), U(MS_U), END ) ); + case MS_DL: + return (event.pressed ? MACRO( D(MS_L), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) ); + case MS_DR: + return (event.pressed ? MACRO( D(MS_R), D(MS_D), END ) : MACRO( U(MS_L), U(MS_U), END ) ); + } + return MACRO_NONE; +} +*/ + +uint8_t keymap_key_to_keycode(uint8_t layer, key_t key) +{ + return pgm_read_byte(&keymaps[(layer)][(key.row)][(key.col)]); +} + +action_t keymap_fn_to_action(uint8_t keycode) +{ + action_t action; + action.code = pgm_read_word(&fn_actions[FN_INDEX(keycode)]); + return action; +} diff --git a/converter/terminal_bluefruit/led.c b/converter/terminal_bluefruit/led.c new file mode 100644 index 0000000000..e5bf41d4ab --- /dev/null +++ b/converter/terminal_bluefruit/led.c @@ -0,0 +1,35 @@ +/* +Converter for 70% IBM Terminal Keyboard +Author: Benjamin Gould, 2013 +Based on code Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "stdint.h" +#include "ps2.h" +#include "led.h" + + +void led_set(uint8_t usb_led) +{ + uint8_t ps2_led = 0; + if (usb_led & (1<<USB_LED_SCROLL_LOCK)) + ps2_led |= (1<<PS2_LED_SCROLL_LOCK); + if (usb_led & (1<<USB_LED_NUM_LOCK)) + ps2_led |= (1<<PS2_LED_NUM_LOCK); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) + ps2_led |= (1<<PS2_LED_CAPS_LOCK); + ps2_host_set_led(ps2_led); +} diff --git a/converter/terminal_bluefruit/matrix.c b/converter/terminal_bluefruit/matrix.c new file mode 100644 index 0000000000..36901536f1 --- /dev/null +++ b/converter/terminal_bluefruit/matrix.c @@ -0,0 +1,262 @@ +/* +Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <stdbool.h> +#include <avr/io.h> +#include <util/delay.h> +#include "print.h" +#include "util.h" +#include "debug.h" +#include "ps2.h" +#include "matrix.h" + + +static void matrix_make(uint8_t code); +static void matrix_break(uint8_t code); +#ifdef MATRIX_HAS_GHOST +static bool matrix_has_ghost_in_row(uint8_t row); +#endif + + +/* + * Matrix Array usage: + * 'Scan Code Set 3' is assigned into 17x8 cell matrix. + * + * 8bit wide + * +---------+ + * 0| | + * :| | 0x00-0x87 + * ;| | + * 17| | + * +---------+ + */ +static uint8_t matrix[MATRIX_ROWS]; +#define ROW(code) (code>>3) +#define COL(code) (code&0x07) + +static bool is_modified = false; + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + //debug_matrix = true; + //debug_keyboard = true; + //debug_mouse = false; + + ps2_host_init(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; + + return; +} + +uint8_t matrix_scan(void) +{ + + // scan code reading states + static enum { + RESET, + RESET_RESPONSE, + KBD_ID0, + KBD_ID1, + CONFIG, + READY, + F0, + } state = RESET; + + is_modified = false; + + uint8_t code; + if ((code = ps2_host_recv())) { + debug("r"); debug_hex(code); debug(" "); + } + + switch (state) { + case RESET: + debug("wFF "); + if (ps2_host_send(0xFF) == 0xFA) { + debug("[ack]\nRESET_RESPONSE: "); + state = RESET_RESPONSE; + } + break; + case RESET_RESPONSE: + if (code == 0xAA) { + debug("[ok]\nKBD_ID: "); + state = KBD_ID0; + } else if (code) { + debug("err\nRESET: "); + state = RESET; + } + break; + // after reset receive keyboad ID(2 bytes) + case KBD_ID0: + if (code) { + state = KBD_ID1; + } + break; + case KBD_ID1: + if (code) { + debug("\nCONFIG: "); + state = CONFIG; + } + break; + case CONFIG: + debug("wF8 "); + if (ps2_host_send(0xF8) == 0xFA) { + debug("[ack]\nREADY\n"); + state = READY; + } + break; + case READY: + switch (code) { + case 0x00: + break; + case 0xF0: + state = F0; + debug(" "); + break; + default: // normal key make + if (code < 0x88) { + matrix_make(code); + } else { + debug("unexpected scan code at READY: "); debug_hex(code); debug("\n"); + } + state = READY; + debug("\n"); + } + break; + case F0: // Break code + switch (code) { + case 0x00: + break; + default: + if (code < 0x88) { + matrix_break(code); + } else { + debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); + } + state = READY; + debug("\n"); + } + break; + } + return 1; +} + +bool matrix_is_modified(void) +{ + return is_modified; +} + +inline +bool matrix_has_ghost(void) +{ +#ifdef MATRIX_HAS_GHOST + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + if (matrix_has_ghost_in_row(i)) + return true; + } +#endif + return false; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1<<col)); +} + +inline +uint8_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print("\nr/c 01234567\n"); + for (uint8_t row = 0; row < matrix_rows(); row++) { + phex(row); print(": "); + pbin_reverse(matrix_get_row(row)); +#ifdef MATRIX_HAS_GHOST + if (matrix_has_ghost_in_row(row)) { + print(" <ghost"); + } +#endif + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop(matrix[i]); + } + return count; +} + +#ifdef MATRIX_HAS_GHOST +inline +static bool matrix_has_ghost_in_row(uint8_t row) +{ + // no ghost exists in case less than 2 keys on + if (((matrix[row] - 1) & matrix[row]) == 0) + return false; + + // ghost exists in case same state as other row + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + if (i != row && (matrix[i] & matrix[row]) == matrix[row]) + return true; + } + return false; +} +#endif + + +inline +static void matrix_make(uint8_t code) +{ + if (!matrix_is_on(ROW(code), COL(code))) { + matrix[ROW(code)] |= 1<<COL(code); + is_modified = true; + } +} + +inline +static void matrix_break(uint8_t code) +{ + if (matrix_is_on(ROW(code), COL(code))) { + matrix[ROW(code)] &= ~(1<<COL(code)); + is_modified = true; + } +} diff --git a/protocol/bluefruit.mk b/protocol/bluefruit.mk new file mode 100644 index 0000000000..7e6328f6cb --- /dev/null +++ b/protocol/bluefruit.mk @@ -0,0 +1,27 @@ +BLUEFRUIT_DIR = protocol/bluefruit +PJRC_DIR = protocol/pjrc + +SRC += $(BLUEFRUIT_DIR)/main.c \ + $(BLUEFRUIT_DIR)/bluefruit.c \ + serial_uart.c \ + $(PJRC_DIR)/pjrc.c \ + $(PJRC_DIR)/usb_keyboard.c \ + $(PJRC_DIR)/usb_debug.c \ + $(PJRC_DIR)/usb.c + +# Option modules +ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) + SRC += $(PJRC_DIR)/usb_mouse.c +endif + +ifdef EXTRAKEY_ENABLE + SRC += $(PJRC_DIR)/usb_extra.c +endif + +# Search Path +VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR) +#VPATH += $(TOP_DIR)/$(BLUEFRUIT_DIR)/usb_debug_only +VPATH += $(TOP_DIR)/$(PJRC_DIR) + +OPT_DEFS += -DPROTOCOL_BLUEFRUIT +OPT_DEFS += -DPROTOCOL_PJRC diff --git a/protocol/bluefruit/bluefruit.c b/protocol/bluefruit/bluefruit.c new file mode 100644 index 0000000000..bdc3de3e6c --- /dev/null +++ b/protocol/bluefruit/bluefruit.c @@ -0,0 +1,202 @@ +/* +Bluefruit Protocol for TMK firmware +Author: Benjamin Gould, 2013 +Based on code Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. + +*/ + +#include <stdint.h> +#include "host.h" +#include "report.h" +#include "print.h" +#include "debug.h" +#include "host_driver.h" +#include "serial.h" +#include "bluefruit.h" + +#define BLUEFRUIT_TRACE_SERIAL 1 + +static uint8_t bluefruit_keyboard_leds = 0; + +static void bluefruit_serial_send(uint8_t); + +void bluefruit_keyboard_print_report(report_keyboard_t *report) +{ + if (!debug_keyboard) return; + dprintf("keys: "); for (int i = 0; i < REPORT_KEYS; i++) { debug_hex8(report->keys[i]); dprintf(" "); } + dprintf(" mods: "); debug_hex8(report->mods); + dprintf(" reserved: "); debug_hex8(report->reserved); + dprintf("\n"); +} + +#ifdef BLUEFRUIT_TRACE_SERIAL +static void bluefruit_trace_header() +{ + dprintf("+------------------------------------+\n"); + dprintf("| HID report to Bluefruit via serial |\n"); + dprintf("+------------------------------------+\n|"); +} + +static void bluefruit_trace_footer() +{ + dprintf("|\n+------------------------------------+\n\n"); +} +#endif + +static void bluefruit_serial_send(uint8_t data) +{ +#ifdef BLUEFRUIT_TRACE_SERIAL + dprintf(" "); + debug_hex8(data); + dprintf(" "); +#endif + serial_send(data); +} + +/*------------------------------------------------------------------* + * Host driver + *------------------------------------------------------------------*/ + +static uint8_t keyboard_leds(void); +static void send_keyboard(report_keyboard_t *report); +static void send_mouse(report_mouse_t *report); +static void send_system(uint16_t data); +static void send_consumer(uint16_t data); + +static host_driver_t driver = { + keyboard_leds, + send_keyboard, + send_mouse, + send_system, + send_consumer +}; + +host_driver_t *bluefruit_driver(void) +{ + return &driver; +} + +static uint8_t keyboard_leds(void) { + return bluefruit_keyboard_leds; +} + +static void send_keyboard(report_keyboard_t *report) +{ +#ifdef BLUEFRUIT_TRACE_SERIAL + bluefruit_trace_header(); +#endif + bluefruit_serial_send(0xFD); + for (uint8_t i = 0; i < REPORT_SIZE; i++) { + bluefruit_serial_send(report->raw[i]); + } +#ifdef BLUEFRUIT_TRACE_SERIAL + bluefruit_trace_footer(); +#endif +} + +static void send_mouse(report_mouse_t *report) +{ +#ifdef BLUEFRUIT_TRACE_SERIAL + bluefruit_trace_header(); +#endif + bluefruit_serial_send(0xFD); + bluefruit_serial_send(0x00); + bluefruit_serial_send(0x03); + bluefruit_serial_send(report->buttons); + bluefruit_serial_send(report->x); + bluefruit_serial_send(report->y); + bluefruit_serial_send(report->v); // should try sending the wheel v here + bluefruit_serial_send(report->h); // should try sending the wheel h here + bluefruit_serial_send(0x00); +#ifdef BLUEFRUIT_TRACE_SERIAL + bluefruit_trace_footer(); +#endif +} + +static void send_system(uint16_t data) +{ +} + +/* ++-----------------+-------------------+-------+ +| Consumer Key | Bit Map | Hex | ++-----------------+-------------------+-------+ +| Home | 00000001 00000000 | 01 00 | +| KeyboardLayout | 00000010 00000000 | 02 00 | +| Search | 00000100 00000000 | 04 00 | +| Snapshot | 00001000 00000000 | 08 00 | +| VolumeUp | 00010000 00000000 | 10 00 | +| VolumeDown | 00100000 00000000 | 20 00 | +| Play/Pause | 01000000 00000000 | 40 00 | +| Fast Forward | 10000000 00000000 | 80 00 | +| Rewind | 00000000 00000001 | 00 01 | +| Scan Next Track | 00000000 00000010 | 00 02 | +| Scan Prev Track | 00000000 00000100 | 00 04 | +| Random Play | 00000000 00001000 | 00 08 | +| Stop | 00000000 00010000 | 00 10 | ++-------------------------------------+-------+ +*/ +#define CONSUMER2BLUEFRUIT(usage) \ + (usage == AUDIO_MUTE ? 0x0000 : \ + (usage == AUDIO_VOL_UP ? 0x1000 : \ + (usage == AUDIO_VOL_DOWN ? 0x2000 : \ + (usage == TRANSPORT_NEXT_TRACK ? 0x0002 : \ + (usage == TRANSPORT_PREV_TRACK ? 0x0004 : \ + (usage == TRANSPORT_STOP ? 0x0010 : \ + (usage == TRANSPORT_STOP_EJECT ? 0x0000 : \ + (usage == TRANSPORT_PLAY_PAUSE ? 0x4000 : \ + (usage == AL_CC_CONFIG ? 0x0000 : \ + (usage == AL_EMAIL ? 0x0000 : \ + (usage == AL_CALCULATOR ? 0x0000 : \ + (usage == AL_LOCAL_BROWSER ? 0x0000 : \ + (usage == AC_SEARCH ? 0x0400 : \ + (usage == AC_HOME ? 0x0100 : \ + (usage == AC_BACK ? 0x0000 : \ + (usage == AC_FORWARD ? 0x0000 : \ + (usage == AC_STOP ? 0x0000 : \ + (usage == AC_REFRESH ? 0x0000 : \ + (usage == AC_BOOKMARKS ? 0x0000 : 0))))))))))))))))))) + +static void send_consumer(uint16_t data) +{ + static uint16_t last_data = 0; + if (data == last_data) return; + last_data = data; + + uint16_t bitmap = CONSUMER2BLUEFRUIT(data); + +#ifdef BLUEFRUIT_TRACE_SERIAL + dprintf("\nData: "); + debug_hex16(data); + dprintf("; bitmap: "); + debug_hex16(bitmap); + dprintf("\n"); + bluefruit_trace_header(); +#endif + bluefruit_serial_send(0xFD); + bluefruit_serial_send(0x00); + bluefruit_serial_send(0x02); + bluefruit_serial_send((bitmap>>8)&0xFF); + bluefruit_serial_send(bitmap&0xFF); + bluefruit_serial_send(0x00); + bluefruit_serial_send(0x00); + bluefruit_serial_send(0x00); + bluefruit_serial_send(0x00); +#ifdef BLUEFRUIT_TRACE_SERIAL + bluefruit_trace_footer(); +#endif +} + diff --git a/protocol/bluefruit/bluefruit.h b/protocol/bluefruit/bluefruit.h new file mode 100644 index 0000000000..4f9b58836d --- /dev/null +++ b/protocol/bluefruit/bluefruit.h @@ -0,0 +1,28 @@ +/* +Bluefruit Protocol for TMK firmware +Author: Benjamin Gould, 2013 +Based on code Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef VUSB_H +#define VUSB_H + +#include "host_driver.h" + + +host_driver_t *bluefruit_driver(void); + +#endif diff --git a/protocol/bluefruit/main.c b/protocol/bluefruit/main.c new file mode 100644 index 0000000000..871062ab11 --- /dev/null +++ b/protocol/bluefruit/main.c @@ -0,0 +1,116 @@ +/* +Bluefruit Protocol for TMK firmware +Author: Benjamin Gould, 2013 +Based on code Copyright 2011 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include <stdint.h> +#include <avr/interrupt.h> +#include <avr/wdt.h> +#include <avr/sleep.h> +#include <util/delay.h> +#include "serial.h" +#include "keyboard.h" +#include "usb.h" +#include "host.h" +#include "timer.h" +#include "print.h" +#include "debug.h" +#include "sendchar.h" +#include "suspend.h" +#include "bluefruit.h" +#include "pjrc.h" + +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) + +#define HOST_DRIVER_NOT_SET 0 +#define BLUEFRUIT_HOST_DRIVER 1 +#define PJRC_HOST_DRIVER 2 + +int main(void) +{ + + CPU_PRESCALE(0); + + DDRD = _BV(PD5); + DDRB = _BV(PB0); + + PORTD = _BV(PD5); + PORTB = _BV(PB0); + + print_set_sendchar(sendchar); + + usb_init(); + _delay_ms(2000); + // while (!usb_configured()) /* wait */ + + dprintf("Initializing keyboard...\n"); + keyboard_init(); + + // This implementation is pretty simplistic... if the USB connection + // is not configured, choose the Bluefruit, otherwise use USB + // Definitely would prefer to have this driven by an input pin and make + // it switch dynamically - BCG + if (!usb_configured()) { + + // Send power to Bluefruit... Adafruit says it takes 27 mA, I think + // the pins should provide 40 mA, but just in case I switch the + // Bluefruit using a transistor - BCG + DDRB = _BV(PB6); + PORTB |= _BV(PB6); + + dprintf("Setting host driver to bluefruit...\n"); + host_set_driver(bluefruit_driver()); + + dprintf("Initializing serial...\n"); + serial_init(); + + // wait an extra second for the PC's operating system + // to load drivers and do whatever it does to actually + // be ready for input + _delay_ms(1000); + PORTD = ~_BV(PD5); + dprintf("Starting main loop"); + while (1) { + keyboard_task(); + } + + } else { + + // I'm not smart enough to get this done with LUFA - BCG + dprintf("Setting host driver to PJRC...\n"); + host_set_driver(pjrc_driver()); +#ifdef SLEEP_LED_ENABLE + sleep_led_init(); +#endif + // wait an extra second for the PC's operating system + // to load drivers and do whatever it does to actually + // be ready for input + _delay_ms(1000); + PORTB = ~_BV(PB0); + dprintf("Starting main loop"); + while (1) { + while (suspend) { + suspend_power_down(); + if (remote_wakeup && suspend_wakeup_condition()) { + usb_remote_wakeup(); + } + } + keyboard_task(); + } + } + +} |