added PS/2 to USB converter use V-USB as protocol stack

1 files changed, 423 insertions, 0 deletions

diff --git a/usbdrv/usbdrvasm15.inc b/usbdrv/usbdrvasm15.inc
new file mode 100644
index 0000000000..401b7f8fff
--- /dev/null
+++ b/usbdrv/usbdrvasm15.inc
@@ -0,0 +1,423 @@
+/* Name: usbdrvasm15.inc
+ * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
+ * Author: contributed by V. Bosch
+ * Creation Date: 2007-08-06
+ * Tabsize: 4
+ * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
+ * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
+ * Revision: $Id: usbdrvasm15.inc 740 2009-04-13 18:23:31Z cs $
+ */
+
+/* Do not link this file! Link usbdrvasm.S instead, which includes the
+ * appropriate implementation!
+ */
+
+/*
+General Description:
+This file is the 15 MHz version of the asssembler part of the USB driver. It
+requires a 15 MHz crystal (not a ceramic resonator and not a calibrated RC
+oscillator).
+
+See usbdrv.h for a description of the entire driver.
+
+Since almost all of this code is timing critical, don't change unless you
+really know what you are doing! Many parts require not only a maximum number
+of CPU cycles, but even an exact number of cycles!
+*/
+
+;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes
+;nominal frequency: 15 MHz -> 10.0 cycles per bit, 80.0 cycles per byte
+; Numbers in brackets are clocks counted from center of last sync bit
+; when instruction starts
+
+;----------------------------------------------------------------------------
+; order of registers pushed: 
+;	YL, SREG [sofError] YH, shift, x1, x2, x3, bitcnt, cnt, x4
+;----------------------------------------------------------------------------
+USB_INTR_VECTOR:              
+    push    YL                   ;2 	push only what is necessary to sync with edge ASAP
+    in      YL, SREG             ;1 
+    push    YL                   ;2 
+;----------------------------------------------------------------------------
+; Synchronize with sync pattern:
+;
+;   sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
+;   sync up with J to K edge during sync pattern -- use fastest possible loops
+;The first part waits at most 1 bit long since we must be in sync pattern.
+;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
+;waitForJ, ensure that this prerequisite is met.
+waitForJ:
+    inc     YL
+    sbis    USBIN, USBMINUS
+    brne    waitForJ        ; just make sure we have ANY timeout
+;-------------------------------------------------------------------------------
+; The following code results in a sampling window of < 1/4 bit 
+;	which meets the spec.
+;-------------------------------------------------------------------------------
+waitForK:			 ;- 
+    sbis    USBIN, USBMINUS      ;1 [00] <-- sample
+    rjmp    foundK               ;2 [01]
+    sbis    USBIN, USBMINUS	 ;	 <-- sample
+    rjmp    foundK
+    sbis    USBIN, USBMINUS	 ;	 <-- sample
+    rjmp    foundK
+    sbis    USBIN, USBMINUS	 ;	 <-- sample
+    rjmp    foundK
+    sbis    USBIN, USBMINUS	 ;	 <-- sample
+    rjmp    foundK
+    sbis    USBIN, USBMINUS	 ;	 <-- sample
+    rjmp    foundK
+#if USB_COUNT_SOF
+    lds     YL, usbSofCount
+    inc     YL
+    sts     usbSofCount, YL
+#endif  /* USB_COUNT_SOF */
+#ifdef USB_SOF_HOOK
+    USB_SOF_HOOK
+#endif
+    rjmp    sofError
+;------------------------------------------------------------------------------
+; {3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for 
+;	center sampling] 
+; 	we have 1 bit time for setup purposes, then sample again. 
+;	Numbers in brackets are cycles from center of first sync (double K) 
+;	bit after the instruction
+;------------------------------------------------------------------------------
+foundK:                          ;- [02]
+    lds     YL, usbInputBufOffset;2 [03+04]	tx loop
+    push    YH                   ;2 [05+06]
+    clr     YH                   ;1 [07]
+    subi    YL, lo8(-(usbRxBuf)) ;1 [08] 	[rx loop init]
+    sbci    YH, hi8(-(usbRxBuf)) ;1 [09] 	[rx loop init]
+    push    shift                ;2 [10+11]
+    ser	    shift		 ;1 [12]
+    sbis    USBIN, USBMINUS      ;1 [-1] [13] <--sample:we want two bits K (sample 1 cycle too early)
+    rjmp    haveTwoBitsK         ;2 [00] [14]
+    pop     shift                ;2 	 [15+16] undo the push from before
+    pop     YH 			 ;2 	 [17+18] undo the push from before
+    rjmp    waitForK             ;2 	 [19+20] this was not the end of sync, retry
+; The entire loop from waitForK until rjmp waitForK above must not exceed two
+; bit times (= 20 cycles).
+
+;----------------------------------------------------------------------------
+; push more registers and initialize values while we sample the first bits:
+;----------------------------------------------------------------------------
+haveTwoBitsK:			;- [01]
+    push    x1              	;2 [02+03]
+    push    x2              	;2 [04+05]
+    push    x3              	;2 [06+07]
+    push    bitcnt              ;2 [08+09]	
+    in      x1, USBIN       	;1 [00] [10] <-- sample bit 0
+    bst     x1, USBMINUS    	;1 [01]
+    bld     shift, 0        	;1 [02]
+    push    cnt             	;2 [03+04]
+    ldi     cnt, USB_BUFSIZE	;1 [05] 
+    push    x4              	;2 [06+07] tx loop
+    rjmp    rxLoop          	;2 [08]
+;----------------------------------------------------------------------------
+; Receiver loop (numbers in brackets are cycles within byte after instr)
+;----------------------------------------------------------------------------
+unstuff0:               	;- [07] (branch taken)
+    andi    x3, ~0x01   	;1 [08]
+    mov     x1, x2      	;1 [09] x2 contains last sampled (stuffed) bit
+    in      x2, USBIN   	;1 [00] [10] <-- sample bit 1 again
+    andi    x2, USBMASK 	;1 [01]
+    breq    se0Hop         	;1 [02] SE0 check for bit 1 
+    ori     shift, 0x01 	;1 [03] 0b00000001
+    nop				;1 [04]
+    rjmp    didUnstuff0 	;2 [05]
+;-----------------------------------------------------
+unstuff1:               	;- [05] (branch taken)
+    mov     x2, x1      	;1 [06] x1 contains last sampled (stuffed) bit
+    andi    x3, ~0x02   	;1 [07]
+    ori     shift, 0x02 	;1 [08] 0b00000010
+    nop                 	;1 [09]
+    in      x1, USBIN   	;1 [00] [10] <-- sample bit 2 again
+    andi    x1, USBMASK 	;1 [01]
+    breq    se0Hop         	;1 [02] SE0 check for bit 2 
+    rjmp    didUnstuff1 	;2 [03]
+;-----------------------------------------------------
+unstuff2:               	;- [05] (branch taken)
+    andi    x3, ~0x04   	;1 [06]
+    ori     shift, 0x04 	;1 [07] 0b00000100
+    mov     x1, x2      	;1 [08] x2 contains last sampled (stuffed) bit
+    nop                 	;1 [09]
+    in      x2, USBIN   	;1 [00] [10] <-- sample bit 3
+    andi    x2, USBMASK 	;1 [01]
+    breq    se0Hop         	;1 [02] SE0 check for bit 3 
+    rjmp    didUnstuff2 	;2 [03]
+;-----------------------------------------------------
+unstuff3:               	;- [00] [10]  (branch taken)
+    in      x2, USBIN   	;1 [01] [11] <-- sample stuffed bit 3 one cycle too late
+    andi    x2, USBMASK 	;1 [02]
+    breq    se0Hop         	;1 [03] SE0 check for stuffed bit 3 
+    andi    x3, ~0x08   	;1 [04]
+    ori     shift, 0x08 	;1 [05] 0b00001000
+    rjmp    didUnstuff3 	;2 [06]
+;----------------------------------------------------------------------------
+; extra jobs done during bit interval:
+;
+; bit 0:    store, clear [SE0 is unreliable here due to bit dribbling in hubs], 
+; 		overflow check, jump to the head of rxLoop
+; bit 1:    SE0 check
+; bit 2:    SE0 check, recovery from delay [bit 0 tasks took too long]
+; bit 3:    SE0 check, recovery from delay [bit 0 tasks took too long]
+; bit 4:    SE0 check, none
+; bit 5:    SE0 check, none
+; bit 6:    SE0 check, none
+; bit 7:    SE0 check, reconstruct: x3 is 0 at bit locations we changed, 1 at others
+;----------------------------------------------------------------------------
+rxLoop:				;- [09]
+    in      x2, USBIN   	;1 [00] [10] <-- sample bit 1 (or possibly bit 0 stuffed)
+    andi    x2, USBMASK 	;1 [01]
+    brne    SkipSe0Hop		;1 [02]
+se0Hop:				;- [02]
+    rjmp    se0         	;2 [03] SE0 check for bit 1 
+SkipSe0Hop:			;- [03]
+    ser     x3          	;1 [04]
+    andi    shift, 0xf9 	;1 [05] 0b11111001
+    breq    unstuff0    	;1 [06]
+didUnstuff0:			;- [06]
+    eor     x1, x2      	;1 [07]
+    bst     x1, USBMINUS	;1 [08]
+    bld     shift, 1    	;1 [09] 
+    in      x1, USBIN   	;1 [00] [10] <-- sample bit 2 (or possibly bit 1 stuffed)
+    andi    x1, USBMASK 	;1 [01]
+    breq    se0Hop         	;1 [02] SE0 check for bit 2 
+    andi    shift, 0xf3 	;1 [03] 0b11110011
+    breq    unstuff1    	;1 [04] do remaining work for bit 1
+didUnstuff1:			;- [04]
+    eor     x2, x1      	;1 [05]
+    bst     x2, USBMINUS	;1 [06]
+    bld     shift, 2    	;1 [07]
+    nop2			;2 [08+09]
+    in      x2, USBIN   	;1 [00] [10] <-- sample bit 3 (or possibly bit 2 stuffed)
+    andi    x2, USBMASK 	;1 [01]
+    breq    se0Hop         	;1 [02] SE0 check for bit 3 
+    andi    shift, 0xe7 	;1 [03] 0b11100111
+    breq    unstuff2    	;1 [04]
+didUnstuff2:			;- [04]
+    eor     x1, x2      	;1 [05]
+    bst     x1, USBMINUS	;1 [06]
+    bld     shift, 3    	;1 [07]
+didUnstuff3:			;- [07]
+    andi    shift, 0xcf 	;1 [08] 0b11001111
+    breq    unstuff3    	;1 [09]
+    in      x1, USBIN   	;1 [00] [10] <-- sample bit 4
+    andi    x1, USBMASK 	;1 [01]
+    breq    se0Hop         	;1 [02] SE0 check for bit 4
+    eor     x2, x1      	;1 [03]
+    bst     x2, USBMINUS	;1 [04]
+    bld     shift, 4    	;1 [05]
+didUnstuff4:			;- [05]
+    andi    shift, 0x9f 	;1 [06] 0b10011111
+    breq    unstuff4    	;1 [07]
+    nop2			;2 [08+09]
+    in      x2, USBIN   	;1 [00] [10] <-- sample bit 5
+    andi    x2, USBMASK 	;1 [01]
+    breq    se0         	;1 [02] SE0 check for bit 5
+    eor     x1, x2      	;1 [03]
+    bst     x1, USBMINUS	;1 [04]
+    bld     shift, 5    	;1 [05]
+didUnstuff5:			;- [05]
+    andi    shift, 0x3f 	;1 [06] 0b00111111
+    breq    unstuff5    	;1 [07]
+    nop2			;2 [08+09]
+    in      x1, USBIN   	;1 [00] [10] <-- sample bit 6
+    andi    x1, USBMASK 	;1 [01]
+    breq    se0         	;1 [02] SE0 check for bit 6
+    eor     x2, x1      	;1 [03]
+    bst     x2, USBMINUS	;1 [04]
+    bld     shift, 6   	 	;1 [05]
+didUnstuff6:			;- [05]
+    cpi     shift, 0x02 	;1 [06] 0b00000010
+    brlo    unstuff6    	;1 [07]
+    nop2			;2 [08+09]
+    in      x2, USBIN   	;1 [00] [10] <-- sample bit 7
+    andi    x2, USBMASK 	;1 [01]
+    breq    se0         	;1 [02] SE0 check for bit 7
+    eor     x1, x2      	;1 [03]
+    bst     x1, USBMINUS	;1 [04]
+    bld     shift, 7    	;1 [05]
+didUnstuff7:			;- [05] 
+    cpi     shift, 0x04 	;1 [06] 0b00000100
+    brlo    unstuff7		;1 [07]
+    eor     x3, shift   	;1 [08] reconstruct: x3 is 0 at bit locations we changed, 1 at others
+    nop				;1 [09]
+    in      x1, USBIN   	;1 [00]	[10] <-- sample bit 0
+    st      y+, x3      	;2 [01+02] store data
+    eor     x2, x1      	;1 [03]
+    bst     x2, USBMINUS	;1 [04]
+    bld     shift, 0    	;1 [05]
+    subi    cnt, 1		;1 [06]
+    brcs    overflow	;1 [07]
+    rjmp    rxLoop		;2 [08]
+;-----------------------------------------------------
+unstuff4:               	;- [08] 
+    andi    x3, ~0x10   	;1 [09]
+    in      x1, USBIN   	;1 [00] [10] <-- sample stuffed bit 4
+    andi    x1, USBMASK 	;1 [01]
+    breq    se0         	;1 [02] SE0 check for stuffed bit 4
+    ori     shift, 0x10 	;1 [03]
+    rjmp    didUnstuff4 	;2 [04]
+;-----------------------------------------------------
+unstuff5:               	;- [08] 
+    ori     shift, 0x20 	;1 [09]
+    in      x2, USBIN   	;1 [00] [10] <-- sample stuffed bit 5
+    andi    x2, USBMASK 	;1 [01]
+    breq    se0         	;1 [02] SE0 check for stuffed bit 5
+    andi    x3, ~0x20   	;1 [03]
+    rjmp    didUnstuff5		;2 [04]
+;-----------------------------------------------------
+unstuff6:               	;- [08] 
+    andi    x3, ~0x40   	;1 [09]
+    in      x1, USBIN   	;1 [00] [10] <-- sample stuffed bit 6
+    andi    x1, USBMASK 	;1 [01]
+    breq    se0         	;1 [02] SE0 check for stuffed bit 6
+    ori     shift, 0x40 	;1 [03]
+    rjmp    didUnstuff6 	;2 [04]
+;-----------------------------------------------------
+unstuff7:			;- [08]
+    andi    x3, ~0x80   	;1 [09]
+    in      x2, USBIN   	;1 [00] [10] <-- sample stuffed bit 7
+    andi    x2, USBMASK 	;1 [01]
+    breq    se0         	;1 [02] SE0 check for stuffed bit 7
+    ori     shift, 0x80 	;1 [03]
+    rjmp    didUnstuff7 	;2 [04]
+    
+macro POP_STANDARD ; 16 cycles
+    pop     x4    
+    pop     cnt
+    pop     bitcnt
+    pop     x3
+    pop     x2
+    pop     x1
+    pop     shift
+    pop     YH
+    endm
+macro POP_RETI     ; 5 cycles
+    pop     YL
+    out     SREG, YL
+    pop     YL
+    endm
+
+#include "asmcommon.inc"
+
+;---------------------------------------------------------------------------
+; USB spec says:
+; idle = J
+; J = (D+ = 0), (D- = 1)
+; K = (D+ = 1), (D- = 0)
+; Spec allows 7.5 bit times from EOP to SOP for replies
+;---------------------------------------------------------------------------
+bitstuffN:		    	;- [04]
+    eor     x1, x4          	;1 [05]
+    clr	    x2			;1 [06]
+    nop				;1 [07]
+    rjmp    didStuffN       	;1 [08]
+;---------------------------------------------------------------------------    
+bitstuff6:		    	;- [04]
+    eor     x1, x4          	;1 [05]
+    clr	    x2			;1 [06]
+    rjmp    didStuff6       	;1 [07]
+;---------------------------------------------------------------------------
+bitstuff7:		    	;- [02]
+    eor     x1, x4          	;1 [03]
+    clr	    x2			;1 [06]
+    nop			    	;1 [05]
+    rjmp    didStuff7       	;1 [06]
+;---------------------------------------------------------------------------
+sendNakAndReti:			;- [-19]
+    ldi     x3, USBPID_NAK  	;1 [-18]
+    rjmp    sendX3AndReti   	;1 [-17]
+;---------------------------------------------------------------------------
+sendAckAndReti:			;- [-17]
+    ldi     cnt, USBPID_ACK 	;1 [-16]
+sendCntAndReti:			;- [-16]
+    mov     x3, cnt         	;1 [-15]
+sendX3AndReti:			;- [-15]
+    ldi     YL, 20          	;1 [-14] x3==r20 address is 20
+    ldi     YH, 0           	;1 [-13]
+    ldi     cnt, 2          	;1 [-12]
+;   rjmp    usbSendAndReti      fallthrough
+;---------------------------------------------------------------------------
+;usbSend:
+;pointer to data in 'Y'
+;number of bytes in 'cnt' -- including sync byte [range 2 ... 12]
+;uses: x1...x4, btcnt, shift, cnt, Y
+;Numbers in brackets are time since first bit of sync pattern is sent
+;We need not to match the transfer rate exactly because the spec demands 
+;only 1.5% precision anyway.
+usbSendAndReti:             	;- [-13] 13 cycles until SOP
+    in      x2, USBDDR      	;1 [-12]
+    ori     x2, USBMASK     	;1 [-11]
+    sbi     USBOUT, USBMINUS	;2 [-09-10] prepare idle state; D+ and D- must have been 0 (no pullups)
+    in      x1, USBOUT      	;1 [-08] port mirror for tx loop
+    out     USBDDR, x2      	;1 [-07] <- acquire bus
+	; need not init x2 (bitstuff history) because sync starts with 0 
+    ldi     x4, USBMASK     	;1 [-06] 	exor mask
+    ldi     shift, 0x80     	;1 [-05] 	sync byte is first byte sent
+    ldi     bitcnt, 6    	;1 [-04] 
+txBitLoop:		    	;- [-04] [06]
+    sbrs    shift, 0        	;1 [-03] [07]
+    eor     x1, x4          	;1 [-02] [08] 
+    ror     shift           	;1 [-01] [09]  
+didStuffN:		    	;-       [09]
+    out     USBOUT, x1      	;1 [00]  [10] <-- out N
+    ror     x2              	;1 [01]
+    cpi     x2, 0xfc        	;1 [02]
+    brcc    bitstuffN       	;1 [03]
+    dec     bitcnt          	;1 [04]
+    brne    txBitLoop       	;1 [05]
+    sbrs    shift, 0        	;1 [06]
+    eor     x1, x4          	;1 [07]
+    ror     shift           	;1 [08]
+didStuff6:			;- [08]
+    nop				;1 [09]
+    out     USBOUT, x1      	;1 [00] [10] <-- out 6
+    ror     x2              	;1 [01] 
+    cpi     x2, 0xfc        	;1 [02]
+    brcc    bitstuff6       	;1 [03]
+    sbrs    shift, 0        	;1 [04]
+    eor     x1, x4          	;1 [05]
+    ror     shift           	;1 [06]
+    ror     x2              	;1 [07]
+didStuff7:			;- [07]
+    ldi     bitcnt, 6    	;1 [08]
+    cpi     x2, 0xfc        	;1 [09]
+    out     USBOUT, x1      	;1 [00] [10] <-- out 7
+    brcc    bitstuff7       	;1 [01]
+    ld      shift, y+       	;2 [02+03]
+    dec     cnt             	;1 [04]
+    brne    txBitLoop      	;1 [05]
+makeSE0:
+    cbr     x1, USBMASK     	;1 [06] 	prepare SE0 [spec says EOP may be 19 to 23 cycles]
+    lds     x2, usbNewDeviceAddr;2 [07+08]
+    lsl     x2                  ;1 [09] we compare with left shifted address
+;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
+;set address only after data packet was sent, not after handshake
+    out     USBOUT, x1      	;1 [00] [10] <-- out SE0-- from now 2 bits==20 cycl. until bus idle
+    subi    YL, 20 + 2          ;1 [01] Only assign address on data packets, not ACK/NAK in x3
+    sbci    YH, 0           	;1 [02]
+    breq    skipAddrAssign  	;1 [03]
+    sts     usbDeviceAddr, x2	;2 [04+05] if not skipped: SE0 is one cycle longer
+;----------------------------------------------------------------------------
+;end of usbDeviceAddress transfer
+skipAddrAssign:				;- [03/04]
+    ldi     x2, 1<<USB_INTR_PENDING_BIT	;1 [05] int0 occurred during TX -- clear pending flag
+    USB_STORE_PENDING(x2)           ;1 [06]
+    ori     x1, USBIDLE     		;1 [07]
+    in      x2, USBDDR      		;1 [08]
+    cbr     x2, USBMASK     		;1 [09] set both pins to input
+    mov     x3, x1          		;1 [10]
+    cbr     x3, USBMASK     		;1 [11] configure no pullup on both pins
+    ldi     x4, 3           		;1 [12]
+se0Delay:				;- [12] [15] 
+    dec     x4              		;1 [13] [16] 
+    brne    se0Delay        		;1 [14] [17] 
+    nop2				;2      [18+19]
+    out     USBOUT, x1      		;1      [20] <--out J (idle) -- end of SE0 (EOP sig.)
+    out     USBDDR, x2      		;1      [21] <--release bus now
+    out     USBOUT, x3      		;1      [22] <--ensure no pull-up resistors are active
+    rjmp    doReturn			;1	[23]
+;---------------------------------------------------------------------------