Move USB Host Shield and Arduino core to `lib/` (#13973)

5 files changed, 0 insertions, 398 deletions

diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino
deleted file mode 100644
index d59b9bb3dc..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/ArduinoBlinkLED/ArduinoBlinkLED.ino
+++ /dev/null
@@ -1,89 +0,0 @@
-// The source for the Android application can be found at the following link: https://github.com/Lauszus/ArduinoBlinkLED
-// The code for the Android application is heavily based on this guide: http://allaboutee.com/2011/12/31/arduino-adk-board-blink-an-led-with-your-phone-code-and-explanation/ by Miguel
-#include <adk.h>
-
-//
-// CAUTION! WARNING! ATTENTION! VORSICHT! ADVARSEL! ¡CUIDADO! ВНИМАНИЕ!
-//
-// Pin 13 is occupied by the SCK pin on various Arduino boards,
-// including Uno, Duemilanove, etc., so use a different pin for those boards.
-//
-// CAUTION! WARNING! ATTENTION! VORSICHT! ADVARSEL! ¡CUIDADO! ВНИМАНИЕ!
-//
-#if defined(LED_BUILTIN)
-#define LED LED_BUILTIN // Use built in LED
-#else
-#define LED 9 // Set to something here that makes sense for your board.
-#endif
-
-
-// Satisfy IDE, which only needs to see the include statment in the ino.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-ADK adk(&Usb, "TKJElectronics", // Manufacturer Name
-              "ArduinoBlinkLED", // Model Name
-              "Example sketch for the USB Host Shield", // Description (user-visible string)
-              "1.0", // Version
-              "http://www.tkjelectronics.dk/uploads/ArduinoBlinkLED.apk", // URL (web page to visit if no installed apps support the accessory)
-              "123456789"); // Serial Number (optional)
-
-uint32_t timer;
-bool connected;
-
-void setup() {
-  Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  if (Usb.Init() == -1) {
-    Serial.print("\r\nOSCOKIRQ failed to assert");
-    while (1); // halt
-  }
-  pinMode(LED, OUTPUT);
-  Serial.print("\r\nArduino Blink LED Started");
-}
-
-void loop() {
-  Usb.Task();
-
-  if (adk.isReady()) {
-    if (!connected) {
-      connected = true;
-      Serial.print(F("\r\nConnected to accessory"));
-    }
-
-    uint8_t msg[1];
-    uint16_t len = sizeof(msg);
-    uint8_t rcode = adk.RcvData(&len, msg);
-    if (rcode && rcode != hrNAK) {
-      Serial.print(F("\r\nData rcv: "));
-      Serial.print(rcode, HEX);
-    } else if (len > 0) {
-      Serial.print(F("\r\nData Packet: "));
-      Serial.print(msg[0]);
-      digitalWrite(LED, msg[0] ? HIGH : LOW);
-    }
-
-    if (millis() - timer >= 1000) { // Send data every 1s
-      timer = millis();
-      rcode = adk.SndData(sizeof(timer), (uint8_t*)&timer);
-      if (rcode && rcode != hrNAK) {
-        Serial.print(F("\r\nData send: "));
-        Serial.print(rcode, HEX);
-      } else if (rcode != hrNAK) {
-        Serial.print(F("\r\nTimer: "));
-        Serial.print(timer);
-      }
-    }
-  } else {
-    if (connected) {
-      connected = false;
-      Serial.print(F("\r\nDisconnected from accessory"));
-      digitalWrite(LED, LOW);
-    }
-  }
-}
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/adk_barcode/adk_barcode.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/adk_barcode/adk_barcode.ino
deleted file mode 100644
index a308ff0f83..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/adk_barcode/adk_barcode.ino
+++ /dev/null
@@ -1,91 +0,0 @@
-/**/
-/* A sketch demonstrating data exchange between two USB devices - a HID barcode scanner and ADK-compatible Android phone */
-/**/
-#include <adk.h>
-#include <hidboot.h>
-#include <usbhub.h>
-
-// Satisfy IDE, which only needs to see the include statment in the ino.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-USBHub Hub1(&Usb);
-USBHub Hub2(&Usb);
-HIDBoot<HID_PROTOCOL_KEYBOARD> Keyboard(&Usb);
-
-ADK adk(&Usb,"Circuits@Home, ltd.",
-            "USB Host Shield",
-            "Arduino Terminal for Android",
-            "1.0",
-            "http://www.circuitsathome.com",
-            "0000000000000001");
-
-
-class KbdRptParser : public KeyboardReportParser
-{
-
-protected:
-	void OnKeyDown	(uint8_t mod, uint8_t key);
-	void OnKeyPressed(uint8_t key);
-};
-
-void KbdRptParser::OnKeyDown(uint8_t mod, uint8_t key)
-{
-    uint8_t c = OemToAscii(mod, key);
-
-    if (c)
-        OnKeyPressed(c);
-}
-
-/* what to do when symbol arrives */
-void KbdRptParser::OnKeyPressed(uint8_t key)
-{
-const char* new_line = "\n";
-uint8_t rcode;
-uint8_t keylcl;
-
- if( adk.isReady() == false ) {
-   return;
- }
-
-  keylcl = key;
-
-  if( keylcl == 0x13 ) {
-    rcode = adk.SndData( strlen( new_line ), (uint8_t *)new_line );
-  }
-  else {
-    rcode = adk.SndData( 1, &keylcl );
-  }
-
-  Serial.print((char) keylcl );
-  Serial.print(" : ");
-  Serial.println( keylcl, HEX );
-};
-
-KbdRptParser Prs;
-
-void setup()
-{
-  Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-  Serial.println("\r\nADK demo start");
-
-  if (Usb.Init() == -1) {
-    Serial.println("OSCOKIRQ failed to assert");
-    while(1); //halt
-  }//if (Usb.Init() == -1...
-
-  Keyboard.SetReportParser(0, (HIDReportParser*)&Prs);
-
-  delay( 200 );
-}
-
-void loop()
-{
-  Usb.Task();
-}
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino
deleted file mode 100644
index f65adf57bb..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/demokit_20/demokit_20.ino
+++ /dev/null
@@ -1,103 +0,0 @@
-#include <adk.h>
-#include <usbhub.h>
-
-// Satisfy IDE, which only needs to see the include statment in the ino.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-USBHub hub0(&Usb);
-USBHub hub1(&Usb);
-ADK adk(&Usb,"Google, Inc.",
-            "DemoKit",
-            "DemoKit Arduino Board",
-            "1.0",
-            "http://www.android.com",
-            "0000000012345678");
-uint8_t  b, b1;
-
-
-#define  LED1_RED       3
-#define  BUTTON1        2
-
-void init_buttons()
-{
-	pinMode(BUTTON1, INPUT);
-
-	// enable the internal pullups
-	digitalWrite(BUTTON1, HIGH);
-}
-
-void init_leds()
-{
-	digitalWrite(LED1_RED, 0);
-
-	pinMode(LED1_RED, OUTPUT);
-}
-
-void setup()
-{
-	Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-	Serial.println("\r\nADK demo start");
-
-        if (Usb.Init() == -1) {
-          Serial.println("OSCOKIRQ failed to assert");
-        while(1); //halt
-        }//if (Usb.Init() == -1...
-
-
-	init_leds();
-	init_buttons();
-	b1 = digitalRead(BUTTON1);
-}
-
-void loop()
-{
-  uint8_t rcode;
-  uint8_t msg[3] = { 0x00 };
-   Usb.Task();
-
-   if( adk.isReady() == false ) {
-     analogWrite(LED1_RED, 255);
-     return;
-   }
-   uint16_t len = sizeof(msg);
-
-   rcode = adk.RcvData(&len, msg);
-   if( rcode ) {
-     USBTRACE2("Data rcv. :", rcode );
-   }
-   if(len > 0) {
-     USBTRACE("\r\nData Packet.");
-    // assumes only one command per packet
-    if (msg[0] == 0x2) {
-      switch( msg[1] ) {
-        case 0:
-          analogWrite(LED1_RED, 255 - msg[2]);
-          break;
-      }//switch( msg[1]...
-    }//if (msg[0] == 0x2...
-   }//if( len > 0...
-
-   msg[0] = 0x1;
-
-   b = digitalRead(BUTTON1);
-   if (b != b1) {
-     USBTRACE("\r\nButton state changed");
-     msg[1] = 0;
-     msg[2] = b ? 0 : 1;
-     rcode = adk.SndData( 3, msg );
-     if( rcode ) {
-       USBTRACE2("Button send: ", rcode );
-     }
-     b1 = b;
-    }//if (b != b1...
-
-
-      delay( 10 );
-}
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/term_test/term_test.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/term_test/term_test.ino
deleted file mode 100644
index db681c3b50..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/term_test/term_test.ino
+++ /dev/null
@@ -1,65 +0,0 @@
-#include <adk.h>
-#include <usbhub.h>
-
-// Satisfy IDE, which only needs to see the include statment in the ino.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-//USBHub     Hub(&Usb);
-
-ADK adk(&Usb,"Circuits@Home, ltd.",
-            "USB Host Shield",
-            "Arduino Terminal for Android",
-            "1.0",
-            "http://www.circuitsathome.com",
-            "0000000000000001");
-
-void setup()
-{
-	Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-	Serial.println("\r\nADK demo start");
-
-        if (Usb.Init() == -1) {
-          Serial.println("OSCOKIRQ failed to assert");
-        while(1); //halt
-        }//if (Usb.Init() == -1...
-}
-
-void loop()
-{
-  uint8_t rcode;
-  uint8_t msg[64] = { 0x00 };
-  const char* recv = "Received: ";
-
-   Usb.Task();
-
-   if( adk.isReady() == false ) {
-     return;
-   }
-   uint16_t len = 64;
-
-   rcode = adk.RcvData(&len, msg);
-   if( rcode & ( rcode != hrNAK )) {
-     USBTRACE2("Data rcv. :", rcode );
-   }
-   if(len > 0) {
-     USBTRACE("\r\nData Packet.");
-
-    for( uint8_t i = 0; i < len; i++ ) {
-      Serial.print((char)msg[i]);
-    }
-    /* sending back what was received */
-    rcode = adk.SndData( strlen( recv ), (uint8_t *)recv );
-    rcode = adk.SndData( strlen(( char * )msg ), msg );
-
-   }//if( len > 0 )...
-
-   delay( 1000 );
-}
-
diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/term_time/term_time.ino b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/term_time/term_time.ino
deleted file mode 100644
index a3f1dbc8cb..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/examples/adk/term_time/term_time.ino
+++ /dev/null
@@ -1,50 +0,0 @@
-#include <adk.h>
-#include <usbhub.h>
-
-// Satisfy IDE, which only needs to see the include statment in the ino.
-#ifdef dobogusinclude
-#include <spi4teensy3.h>
-#include <SPI.h>
-#endif
-
-USB Usb;
-
-ADK adk(&Usb,"Circuits@Home, ltd.",
-            "USB Host Shield",
-            "Arduino Terminal for Android",
-            "1.0",
-            "http://www.circuitsathome.com",
-            "0000000000000001");
-
-void setup()
-{
-	Serial.begin(115200);
-#if !defined(__MIPSEL__)
-  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
-#endif
-	Serial.println("\r\nADK demo start");
-
-        if (Usb.Init() == -1) {
-          Serial.println("OSCOKIRQ failed to assert");
-        while(1); //halt
-        }//if (Usb.Init() == -1...
-}
-
-void loop()
-{
-  uint8_t buf[ 12 ] = { 0 }; //buffer to convert unsigned long to ASCII
-  const char* sec_ela = " seconds elapsed\r";
-  uint8_t rcode;
-
-   Usb.Task();
-   if( adk.isReady() == false ) {
-     return;
-   }
-
-    ultoa( millis()/1000, (char *)buf, 10 );
-
-    rcode = adk.SndData( strlen((char *)buf), buf );
-    rcode = adk.SndData( strlen( sec_ela), (uint8_t *)sec_ela );
-
-      delay( 1000 );
-}