Move USB Host Shield and Arduino core to `lib/` (#13973)

1 files changed, 0 insertions, 82 deletions

diff --git a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PSBuzz.cpp b/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PSBuzz.cpp
deleted file mode 100644
index 498164d5a6..0000000000
--- a/tmk_core/protocol/usb_hid/USB_Host_Shield_2.0/PSBuzz.cpp
+++ /dev/null
@@ -1,82 +0,0 @@
-/* Copyright (C) 2014 Kristian Lauszus, TKJ Electronics. All rights reserved.
-
- This software may be distributed and modified under the terms of the GNU
- General Public License version 2 (GPL2) as published by the Free Software
- Foundation and appearing in the file GPL2.TXT included in the packaging of
- this file. Please note that GPL2 Section 2[b] requires that all works based
- on this software must also be made publicly available under the terms of
- the GPL2 ("Copyleft").
-
- Contact information
- -------------------
-
- Kristian Lauszus, TKJ Electronics
- Web      :  http://www.tkjelectronics.com
- e-mail   :  kristianl@tkjelectronics.com
- */
-
-#include "PSBuzz.h"
-
-// To enable serial debugging see "settings.h"
-//#define PRINTREPORT // Uncomment to print the report send by the PS Buzz Controllers
-
-void PSBuzz::ParseHIDData(HID *hid, bool is_rpt_id, uint8_t len, uint8_t *buf) {
-        if (HIDUniversal::VID == PSBUZZ_VID && HIDUniversal::PID == PSBUZZ_PID && len > 2 && buf) {
-#ifdef PRINTREPORT
-                Notify(PSTR("\r\n"), 0x80);
-                for (uint8_t i = 0; i < len; i++) {
-                        D_PrintHex<uint8_t > (buf[i], 0x80);
-                        Notify(PSTR(" "), 0x80);
-                }
-#endif
-                memcpy(&psbuzzButtons, buf + 2, min((uint8_t)(len - 2), sizeof(psbuzzButtons)));
-
-                if (psbuzzButtons.val != oldButtonState.val) { // Check if anything has changed
-                        buttonClickState.val = psbuzzButtons.val & ~oldButtonState.val; // Update click state variable
-                        oldButtonState.val = psbuzzButtons.val;
-                }
-        }
-};
-
-uint8_t PSBuzz::OnInitSuccessful() {
-        if (HIDUniversal::VID == PSBUZZ_VID && HIDUniversal::PID == PSBUZZ_PID) {
-                Reset();
-                if (pFuncOnInit)
-                        pFuncOnInit(); // Call the user function
-                else
-                        setLedOnAll(); // Turn the LED on, on all four controllers
-        };
-        return 0;
-};
-
-bool PSBuzz::getButtonPress(ButtonEnum b, uint8_t controller) {
-        return psbuzzButtons.val & (1UL << (b + 5 * controller)); // Each controller uses 5 bits, so the value is shifted 5 for each controller
-};
-
-bool PSBuzz::getButtonClick(ButtonEnum b, uint8_t controller) {
-        uint32_t mask = (1UL << (b + 5 * controller)); // Each controller uses 5 bits, so the value is shifted 5 for each controller
-        bool click = buttonClickState.val & mask;
-        buttonClickState.val &= ~mask; // Clear "click" event
-        return click;
-};
-
-// Source: http://www.developerfusion.com/article/84338/making-usb-c-friendly/ and https://github.com/torvalds/linux/blob/master/drivers/hid/hid-sony.c
-void PSBuzz::setLedRaw(bool value, uint8_t controller) {
-        ledState[controller] = value; // Save value for next time it is called
-
-        uint8_t buf[7];
-        buf[0] = 0x00;
-        buf[1] = ledState[0] ? 0xFF : 0x00;
-        buf[2] = ledState[1] ? 0xFF : 0x00;
-        buf[3] = ledState[2] ? 0xFF : 0x00;
-        buf[4] = ledState[3] ? 0xFF : 0x00;
-        buf[5] = 0x00;
-        buf[6] = 0x00;
-
-        PSBuzz_Command(buf, sizeof(buf));
-};
-
-void PSBuzz::PSBuzz_Command(uint8_t *data, uint16_t nbytes) {
-        // bmRequest = Host to device (0x00) | Class (0x20) | Interface (0x01) = 0x21, bRequest = Set Report (0x09), Report ID (0x00), Report Type (Output 0x02), interface (0x00), datalength, datalength, data)
-        pUsb->ctrlReq(bAddress, epInfo[0].epAddr, bmREQ_HID_OUT, HID_REQUEST_SET_REPORT, 0x00, 0x02, 0x00, nbytes, nbytes, data, NULL);
-};