diff options
author | patrickmt <40182064+patrickmt@users.noreply.github.com> | 2018-08-29 15:07:52 -0400 |
---|---|---|
committer | Jack Humbert <jack.humb@gmail.com> | 2018-08-29 15:07:52 -0400 |
commit | 30680c6eb396a2bb06928afd69edae9908ac84fb (patch) | |
tree | a4a6c2598faa25dec208377a70dc0fb895ee9c8a /tmk_core/protocol/arm_atsam/usb/usb2422.c | |
parent | a6c770432f1348c44bc199029ce17b1b9ff4191c (diff) |
Massdrop keyboard support (#3780)
* Massdrop SAMD51
Massdrop SAMD51 keyboards initial project upload
* Removing relocated files
Removing files that were relocated and not deleted from previous location
* LED queue fix and cleaning
Cleaned some white space or comments.
Fix for LED I2C command queue.
Cleaned up interrupts.
Added debug function for printing numbers to scope through m15 line.
* Factory programmed serial usage
Ability to use factory programmed serial in hub and keyboard usb descriptors
* USB serial number and bugfix
Added support for factory programmed serial and usage.
Incorporated bootloader's conditional compiling to align project closer.
Fixed issue when USB device attempted to send before enabled.
General white space and comment cleanup.
* Project cleanup
Cleaned up project in terms of white space, commented code, and unecessary files.
NKRO keyboard is now using correct setreport although KBD was fine to use.
Fixed broken linkage to __xprintf for serial debug statements.
* Fix for extra keys
Fixed possible USB hang on extra keys report set missing
* I2C cleanup
I2C cleanup and file renames necessary for master branch merge
* Boot tracing and clocks cleanup
Added optional boot debug trace mode through debug LED codes.
General clock code cleanup.
* Relocate ARM/Atmel headers
Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes.
* Pull request changes
Pull request changes
* Keymap and compile flag fix
Keymap fix for momentary layer.
Potential compile flag fix for Travis CI failure.
* va_list include fix
Fix for va_list compile failure
* Include file case fixes
Fixes for include files with incorrect case
* ctrl and alt67 keyboard readme
Added ctrl and alt67 keyboard readme files
Diffstat (limited to 'tmk_core/protocol/arm_atsam/usb/usb2422.c')
-rw-r--r-- | tmk_core/protocol/arm_atsam/usb/usb2422.c | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb2422.c new file mode 100644 index 0000000000..7c78e41d49 --- /dev/null +++ b/tmk_core/protocol/arm_atsam/usb/usb2422.c @@ -0,0 +1,412 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "arm_atsam_protocol.h" +#include <string.h> + +Usb2422 USB2422_shadow; +unsigned char i2c0_buf[34]; + +const uint16_t MFRNAME[] = { 'M','a','s','s','d','r','o','p',' ','I','n','c','.' }; //Massdrop Inc. +const uint16_t PRDNAME[] = { 'M','a','s','s','d','r','o','p',' ','H','u','b' }; //Massdrop Hub +#ifndef MD_BOOTLOADER +//Serial number reported stops before first found space character or at last found character +const uint16_t SERNAME[] = { 'U','n','a','v','a','i','l','a','b','l','e' }; //Unavailable +#else +//In production, this field is found, modified, and offset noted as the last 32-bit word in the bootloader space +//The offset allows the application to use the factory programmed serial (which may differ from the physical serial label) +//Serial number reported stops before first found space character or when max size is reached +__attribute__((__aligned__(4))) +const uint16_t SERNAME[BOOTLOADER_SERIAL_MAX_SIZE] = { 'M','D','H','U','B','B','O','O','T','L','0','0','0','0','0','0','0','0','0','0' }; +//NOTE: Serial replacer will not write a string longer than given here as a precaution, so give enough +// space as needed and adjust BOOTLOADER_SERIAL_MAX_SIZE to match amount given +#endif //MD_BOOTLOADER + +uint8_t usb_host_port; + +#ifndef MD_BOOTLOADER + +uint8_t usb_extra_state; +uint8_t usb_extra_manual; +uint8_t usb_gcr_auto; + +#endif //MD_BOOTLOADER + +uint16_t adc_extra; + +void USB_write2422_block(void) +{ + unsigned char *dest = i2c0_buf; + unsigned char *src; + unsigned char *base = (unsigned char *)&USB2422_shadow; + + DBGC(DC_USB_WRITE2422_BLOCK_BEGIN); + + for (src = base; src < base + 256; src += 32) + { + dest[0] = src - base; + dest[1] = 32; + memcpy(&dest[2], src, 32); + i2c0_transmit(USB2422_ADDR, dest, 34, 50000); + SERCOM0->I2CM.CTRLB.bit.CMD = 0x03; + while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) { DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP); } + CLK_delay_us(100); + } + + DBGC(DC_USB_WRITE2422_BLOCK_COMPLETE); +} + +void USB2422_init(void) +{ + Gclk *pgclk = GCLK; + Mclk *pmclk = MCLK; + Port *pport = PORT; + Oscctrl *posc = OSCCTRL; + Usb *pusb = USB; + Srdata_t *pspi = &srdata; + + DBGC(DC_USB2422_INIT_BEGIN); + + while ((v_5v = adc_get(ADC_5V)) < ADC_5V_START_LEVEL) { DBGC(DC_USB2422_INIT_WAIT_5V_LOW); } + + //setup peripheral and synchronous bus clocks to USB + pgclk->PCHCTRL[10].bit.GEN = 0; + pgclk->PCHCTRL[10].bit.CHEN = 1; + pmclk->AHBMASK.bit.USB_ = 1; + pmclk->APBBMASK.bit.USB_ = 1; + + //setup port pins for D-, D+, and SOF_1KHZ + pport->Group[0].PMUX[12].reg = 0x77; //PA24, PA25, function column H for USB D-, D+ + pport->Group[0].PINCFG[24].bit.PMUXEN = 1; + pport->Group[0].PINCFG[25].bit.PMUXEN = 1; + pport->Group[1].PMUX[11].bit.PMUXE = 7; //PB22, function column H for USB SOF_1KHz output + pport->Group[1].PINCFG[22].bit.PMUXEN = 1; + + //configure and enable DFLL for USB clock recovery mode at 48MHz + posc->DFLLCTRLA.bit.ENABLE = 0; + while (posc->DFLLSYNC.bit.ENABLE) { DBGC(DC_USB2422_INIT_OSC_SYNC_DISABLING); } + while (posc->DFLLSYNC.bit.DFLLCTRLB) { DBGC(DC_USB2422_INIT_OSC_SYNC_DFLLCTRLB_1); } + posc->DFLLCTRLB.bit.USBCRM = 1; + while (posc->DFLLSYNC.bit.DFLLCTRLB) { DBGC(DC_USB2422_INIT_OSC_SYNC_DFLLCTRLB_2); } + posc->DFLLCTRLB.bit.MODE = 1; + while (posc->DFLLSYNC.bit.DFLLCTRLB) { DBGC(DC_USB2422_INIT_OSC_SYNC_DFLLCTRLB_3); } + posc->DFLLCTRLB.bit.QLDIS = 0; + while (posc->DFLLSYNC.bit.DFLLCTRLB) { DBGC(DC_USB2422_INIT_OSC_SYNC_DFLLCTRLB_4); } + posc->DFLLCTRLB.bit.CCDIS = 1; + posc->DFLLMUL.bit.MUL = 0xBB80; //4800 x 1KHz + while (posc->DFLLSYNC.bit.DFLLMUL) { DBGC(DC_USB2422_INIT_OSC_SYNC_DFLLMUL); } + posc->DFLLCTRLA.bit.ENABLE = 1; + while (posc->DFLLSYNC.bit.ENABLE) { DBGC(DC_USB2422_INIT_OSC_SYNC_ENABLING); } + + pusb->DEVICE.CTRLA.bit.SWRST = 1; + while (pusb->DEVICE.SYNCBUSY.bit.SWRST) { DBGC(DC_USB2422_INIT_USB_SYNC_SWRST); } + while (pusb->DEVICE.CTRLA.bit.SWRST) { DBGC(DC_USB2422_INIT_USB_WAIT_SWRST); } + //calibration from factory presets + pusb->DEVICE.PADCAL.bit.TRANSN = (USB_FUSES_TRANSN_ADDR >> USB_FUSES_TRANSN_Pos) & USB_FUSES_TRANSN_Msk; + pusb->DEVICE.PADCAL.bit.TRANSP = (USB_FUSES_TRANSP_ADDR >> USB_FUSES_TRANSP_Pos) & USB_FUSES_TRANSP_Msk; + pusb->DEVICE.PADCAL.bit.TRIM = (USB_FUSES_TRIM_ADDR >> USB_FUSES_TRIM_Pos) & USB_FUSES_TRIM_Msk; + //device mode, enabled + pusb->DEVICE.CTRLB.bit.SPDCONF = 0; //full speed + pusb->DEVICE.CTRLA.bit.MODE = 0; + pusb->DEVICE.CTRLA.bit.ENABLE = 1; + while (pusb->DEVICE.SYNCBUSY.bit.ENABLE) { DBGC(DC_USB2422_INIT_USB_SYNC_ENABLING); } + + pusb->DEVICE.QOSCTRL.bit.DQOS = 2; + pusb->DEVICE.QOSCTRL.bit.CQOS = 2; + + pport->Group[USB2422_HUB_ACTIVE_GROUP].PINCFG[USB2422_HUB_ACTIVE_PIN].bit.INEN = 1; + + i2c0_init(); //IC2 clk must be high at USB2422 reset release time to signal SMB configuration + + pspi->bit.HUB_CONNECT = 1; //connect signal + pspi->bit.HUB_RESET_N = 1; //reset high + SPI_WriteSRData(); + + CLK_delay_us(100); + +#ifndef MD_BOOTLOADER + + usb_extra_manual = 0; + usb_gcr_auto = 1; + +#endif //MD_BOOTLOADER + + DBGC(DC_USB2422_INIT_COMPLETE); +} + +void USB_reset(void) +{ + Srdata_t *pspi = &srdata; + + DBGC(DC_USB_RESET_BEGIN); + + //pulse reset for at least 1 usec + pspi->bit.HUB_RESET_N = 0; //reset low + SPI_WriteSRData(); + CLK_delay_us(1); + pspi->bit.HUB_RESET_N = 1; //reset high to run + SPI_WriteSRData(); + CLK_delay_us(1); + + DBGC(DC_USB_RESET_COMPLETE); +} + +void USB_configure(void) +{ + Usb2422 *pusb2422 = &USB2422_shadow; + memset(pusb2422, 0, sizeof(Usb2422)); + + uint16_t *serial_use = (uint16_t *)SERNAME; //Default to use SERNAME from this file + uint8_t serial_length = sizeof(SERNAME) / sizeof(uint16_t); //Default to use SERNAME from this file +#ifndef MD_BOOTLOADER + uint32_t serial_ptrloc = (uint32_t)&_srom - 4; +#else //MD_BOOTLOADER + uint32_t serial_ptrloc = (uint32_t)&_erom - 4; +#endif //MD_BOOTLOADER + uint32_t serial_address = *(uint32_t *)serial_ptrloc; //Address of bootloader's serial number if available + + DBGC(DC_USB_CONFIGURE_BEGIN); + + if (serial_address != 0xFFFFFFFF && serial_address < serial_ptrloc) //Check for factory programmed serial address + { + if ((serial_address & 0xFF) % 4 == 0) //Check alignment + { + serial_use = (uint16_t *)(serial_address); + serial_length = 0; + while ((*(serial_use + serial_length) > 32 && *(serial_use + serial_length) < 127) && + serial_length < BOOTLOADER_SERIAL_MAX_SIZE) + { + serial_length++; + DBGC(DC_USB_CONFIGURE_GET_SERIAL); + } + } + } + + //configure Usb2422 registers + pusb2422->VID.reg = 0x04D8; // from Microchip 4/19/2018 + pusb2422->PID.reg = 0xEEC5; // from Microchip 4/19/2018 = Massdrop, Inc. USB Hub + pusb2422->DID.reg = 0x0101; // BCD 01.01 + pusb2422->CFG1.bit.SELF_BUS_PWR = 1; // self powered for now + pusb2422->CFG1.bit.HS_DISABLE = 1; // full or high speed + //pusb2422->CFG2.bit.COMPOUND = 0; // compound device + pusb2422->CFG3.bit.STRING_EN = 1; // strings enabled + //pusb2422->NRD.bit.PORT2_NR = 0; // MCU is non-removable + pusb2422->MAXPB.reg = 20; // 0mA + pusb2422->HCMCB.reg = 20; // 0mA + pusb2422->MFRSL.reg = sizeof(MFRNAME) / sizeof(uint16_t); + pusb2422->PRDSL.reg = sizeof(PRDNAME) / sizeof(uint16_t); + pusb2422->SERSL.reg = serial_length; + memcpy(pusb2422->MFRSTR, MFRNAME, sizeof(MFRNAME)); + memcpy(pusb2422->PRDSTR, PRDNAME, sizeof(PRDNAME)); + memcpy(pusb2422->SERSTR, serial_use, serial_length * sizeof(uint16_t)); + //pusb2422->BOOSTUP.bit.BOOST=3; //upstream port + //pusb2422->BOOSTDOWN.bit.BOOST1=0; // extra port + //pusb2422->BOOSTDOWN.bit.BOOST2=2; //MCU is close + pusb2422->STCD.bit.USB_ATTACH = 1; + USB_write2422_block(); + + adc_extra = 0; + + DBGC(DC_USB_CONFIGURE_COMPLETE); +} + +uint16_t USB_active(void) +{ + return (PORT->Group[USB2422_HUB_ACTIVE_GROUP].IN.reg & (1 << USB2422_HUB_ACTIVE_PIN)) != 0; +} + +void USB_set_host_by_voltage(void) +{ + //UP is upstream device (HOST) + //DN1 is downstream device (EXTRA) + //DN2 is keyboard (KEYB) + + DBGC(DC_USB_SET_HOST_BY_VOLTAGE_BEGIN); + + usb_host_port = USB_HOST_PORT_UNKNOWN; +#ifndef MD_BOOTLOADER + usb_extra_state = USB_EXTRA_STATE_UNKNOWN; +#endif //MD_BOOTLOADER + srdata.bit.SRC_1 = 1; //USBC-1 available for test + srdata.bit.SRC_2 = 1; //USBC-2 available for test + srdata.bit.E_UP_N = 1; //HOST disable + srdata.bit.E_DN1_N = 1; //EXTRA disable + srdata.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O + srdata.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O + + SPI_WriteSRData(); + + CLK_delay_ms(250); + + while ((v_5v = adc_get(ADC_5V)) < ADC_5V_START_LEVEL) { DBGC(DC_USB_SET_HOST_5V_LOW_WAITING); } + + v_con_1 = adc_get(ADC_CON1); + v_con_2 = adc_get(ADC_CON2); + + v_con_1_boot = v_con_1; + v_con_2_boot = v_con_2; + + if (v_con_1 > v_con_2) + { + srdata.bit.S_UP = 0; //HOST to USBC-1 + srdata.bit.S_DN1 = 1; //EXTRA to USBC-2 + srdata.bit.SRC_1 = 1; //HOST on USBC-1 + srdata.bit.SRC_2 = 0; //EXTRA available on USBC-2 + + srdata.bit.E_VBUS_1 = 1; //USBC-1 enable full power I/O + srdata.bit.E_VBUS_2 = 0; //USBC-2 disable full power I/O + + SPI_WriteSRData(); + + srdata.bit.E_UP_N = 0; //HOST enable + + SPI_WriteSRData(); + + usb_host_port = USB_HOST_PORT_1; + } + else + { + srdata.bit.S_UP = 1; //EXTRA to USBC-1 + srdata.bit.S_DN1 = 0; //HOST to USBC-2 + srdata.bit.SRC_1 = 0; //EXTRA available on USBC-1 + srdata.bit.SRC_2 = 1; //HOST on USBC-2 + + srdata.bit.E_VBUS_1 = 0; //USBC-1 disable full power I/O + srdata.bit.E_VBUS_2 = 1; //USBC-2 enable full power I/O + + SPI_WriteSRData(); + + srdata.bit.E_UP_N = 0; //HOST enable + + SPI_WriteSRData(); + + usb_host_port = USB_HOST_PORT_2; + } + +#ifndef MD_BOOTLOADER + usb_extra_state = USB_EXTRA_STATE_DISABLED; +#endif //MD_BOOTLOADER + + USB_reset(); + USB_configure(); + + DBGC(DC_USB_SET_HOST_BY_VOLTAGE_COMPLETE); +} + +uint8_t USB2422_Port_Detect_Init(void) +{ + uint32_t port_detect_retry_ms; + uint32_t tmod; + + DBGC(DC_PORT_DETECT_INIT_BEGIN); + + USB_set_host_by_voltage(); + + port_detect_retry_ms = CLK_get_ms() + PORT_DETECT_RETRY_INTERVAL; + + while (!USB_active()) + { + tmod = CLK_get_ms() % PORT_DETECT_RETRY_INTERVAL; + + if (v_con_1 > v_con_2) //Values updated from USB_set_host_by_voltage(); + { + //1 flash for port 1 detected + if (tmod > 500 && tmod < 600) { led_on; } + else { led_off; } + } + else if (v_con_2 > v_con_1) //Values updated from USB_set_host_by_voltage(); + { + //2 flash for port 2 detected + if (tmod > 500 && tmod < 600) { led_on; } + else if (tmod > 700 && tmod < 800) { led_on; } + else { led_off; } + } + + if (CLK_get_ms() > port_detect_retry_ms) + { + DBGC(DC_PORT_DETECT_INIT_FAILED); + return 0; + } + } + + DBGC(DC_PORT_DETECT_INIT_COMPLETE); + + return 1; +} + +#ifndef MD_BOOTLOADER + +void USB_ExtraSetState(uint8_t state) +{ + uint8_t state_save = state; + + if (state == USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG) + state = USB_EXTRA_STATE_DISABLED; + + if (usb_host_port == USB_HOST_PORT_1) srdata.bit.E_VBUS_2 = state; + else if (usb_host_port == USB_HOST_PORT_2) srdata.bit.E_VBUS_1 = state; + else return; + + srdata.bit.E_DN1_N = !state; + SPI_WriteSRData(); + + usb_extra_state = state_save; + + if (usb_extra_state == USB_EXTRA_STATE_ENABLED) CDC_print("USB: Extra enabled\r\n"); + else if (usb_extra_state == USB_EXTRA_STATE_DISABLED) + { + CDC_print("USB: Extra disabled\r\n"); + if (led_animation_breathing) gcr_breathe = gcr_desired; + } + else if (usb_extra_state == USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG) CDC_print("USB: Extra disabled until replug\r\n"); + else CDC_print("USB: Extra state unknown\r\n"); +} + +void USB_HandleExtraDevice(void) +{ + uint16_t adcval; + + if (usb_host_port == USB_HOST_PORT_1) adcval = adc_get(ADC_CON2); + else if (usb_host_port == USB_HOST_PORT_2) adcval = adc_get(ADC_CON1); + else return; + + adc_extra = adc_extra * 0.9 + adcval * 0.1; + + //Check for a forced disable state (such as overload prevention) + if (usb_extra_state == USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG) + { + //Detect unplug and reset state to disabled + if (adc_extra > USB_EXTRA_ADC_THRESHOLD) usb_extra_state = USB_EXTRA_STATE_DISABLED; + + return; //Return even if unplug detected + } + + if (usb_extra_manual) + { + if (usb_extra_state == USB_EXTRA_STATE_DISABLED) + USB_ExtraSetState(USB_EXTRA_STATE_ENABLED); + + return; + } + + //dpf("a %i %i\r\n",adcval, adc_extra); + if (usb_extra_state == USB_EXTRA_STATE_DISABLED && adc_extra < USB_EXTRA_ADC_THRESHOLD) USB_ExtraSetState(USB_EXTRA_STATE_ENABLED); + else if (usb_extra_state == USB_EXTRA_STATE_ENABLED && adc_extra > USB_EXTRA_ADC_THRESHOLD) USB_ExtraSetState(USB_EXTRA_STATE_DISABLED); +} + +#endif //MD_BOOTLOADER + |