summaryrefslogtreecommitdiff
path: root/tmk_core/protocol/arm_atsam/usb/udd.h
diff options
context:
space:
mode:
authorpatrickmt <40182064+patrickmt@users.noreply.github.com>2018-08-29 15:07:52 -0400
committerJack Humbert <jack.humb@gmail.com>2018-08-29 15:07:52 -0400
commit30680c6eb396a2bb06928afd69edae9908ac84fb (patch)
treea4a6c2598faa25dec208377a70dc0fb895ee9c8a /tmk_core/protocol/arm_atsam/usb/udd.h
parenta6c770432f1348c44bc199029ce17b1b9ff4191c (diff)
Massdrop keyboard support (#3780)
* Massdrop SAMD51 Massdrop SAMD51 keyboards initial project upload * Removing relocated files Removing files that were relocated and not deleted from previous location * LED queue fix and cleaning Cleaned some white space or comments. Fix for LED I2C command queue. Cleaned up interrupts. Added debug function for printing numbers to scope through m15 line. * Factory programmed serial usage Ability to use factory programmed serial in hub and keyboard usb descriptors * USB serial number and bugfix Added support for factory programmed serial and usage. Incorporated bootloader's conditional compiling to align project closer. Fixed issue when USB device attempted to send before enabled. General white space and comment cleanup. * Project cleanup Cleaned up project in terms of white space, commented code, and unecessary files. NKRO keyboard is now using correct setreport although KBD was fine to use. Fixed broken linkage to __xprintf for serial debug statements. * Fix for extra keys Fixed possible USB hang on extra keys report set missing * I2C cleanup I2C cleanup and file renames necessary for master branch merge * Boot tracing and clocks cleanup Added optional boot debug trace mode through debug LED codes. General clock code cleanup. * Relocate ARM/Atmel headers Moved ARM/Atmel header folder from drivers to lib and made necessary makefile changes. * Pull request changes Pull request changes * Keymap and compile flag fix Keymap fix for momentary layer. Potential compile flag fix for Travis CI failure. * va_list include fix Fix for va_list compile failure * Include file case fixes Fixes for include files with incorrect case * ctrl and alt67 keyboard readme Added ctrl and alt67 keyboard readme files
Diffstat (limited to 'tmk_core/protocol/arm_atsam/usb/udd.h')
-rw-r--r--tmk_core/protocol/arm_atsam/usb/udd.h396
1 files changed, 396 insertions, 0 deletions
diff --git a/tmk_core/protocol/arm_atsam/usb/udd.h b/tmk_core/protocol/arm_atsam/usb/udd.h
new file mode 100644
index 0000000000..b580e58479
--- /dev/null
+++ b/tmk_core/protocol/arm_atsam/usb/udd.h
@@ -0,0 +1,396 @@
+/**
+ * \file
+ *
+ * \brief Common API for USB Device Drivers (UDD)
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _UDD_H_
+#define _UDD_H_
+
+#include "usb_protocol.h"
+#include "udc_desc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup usb_device_group
+ * \defgroup udd_group USB Device Driver (UDD)
+ *
+ * The UDD driver provides a low-level abstraction of the device
+ * controller hardware. Most events coming from the hardware such as
+ * interrupts, which may cause the UDD to call into the UDC and UDI.
+ *
+ * @{
+ */
+
+//! \brief Endpoint identifier
+typedef uint8_t udd_ep_id_t;
+
+//! \brief Endpoint transfer status
+//! Returned in parameters of callback register via udd_ep_run routine.
+typedef enum {
+ UDD_EP_TRANSFER_OK = 0,
+ UDD_EP_TRANSFER_ABORT = 1,
+} udd_ep_status_t;
+
+/**
+ * \brief Global variable to give and record information of the setup request management
+ *
+ * This global variable allows to decode and response a setup request.
+ * It can be updated by udc_process_setup() from UDC or *setup() from UDIs.
+ */
+typedef struct {
+ //! Data received in USB SETUP packet
+ //! Note: The swap of "req.wValues" from uin16_t to le16_t is done by UDD.
+ usb_setup_req_t req;
+
+ //! Point to buffer to send or fill with data following SETUP packet
+ //! This buffer must be word align for DATA IN phase (use prefix COMPILER_WORD_ALIGNED for buffer)
+ uint8_t *payload;
+
+ //! Size of buffer to send or fill, and content the number of byte transfered
+ uint16_t payload_size;
+
+ //! Callback called after reception of ZLP from setup request
+ void (*callback) (void);
+
+ //! Callback called when the buffer given (.payload) is full or empty.
+ //! This one return false to abort data transfer, or true with a new buffer in .payload.
+ bool(*over_under_run) (void);
+} udd_ctrl_request_t;
+extern udd_ctrl_request_t udd_g_ctrlreq;
+
+//! Return true if the setup request \a udd_g_ctrlreq indicates IN data transfer
+#define Udd_setup_is_in() \
+ (USB_REQ_DIR_IN == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
+
+//! Return true if the setup request \a udd_g_ctrlreq indicates OUT data transfer
+#define Udd_setup_is_out() \
+ (USB_REQ_DIR_OUT == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
+
+//! Return the type of the SETUP request \a udd_g_ctrlreq. \see usb_reqtype.
+#define Udd_setup_type() \
+ (udd_g_ctrlreq.req.bmRequestType & USB_REQ_TYPE_MASK)
+
+//! Return the recipient of the SETUP request \a udd_g_ctrlreq. \see usb_recipient
+#define Udd_setup_recipient() \
+ (udd_g_ctrlreq.req.bmRequestType & USB_REQ_RECIP_MASK)
+
+/**
+ * \brief End of halt callback function type.
+ * Registered by routine udd_ep_wait_stall_clear()
+ * Callback called when endpoint stall is cleared.
+ */
+typedef void (*udd_callback_halt_cleared_t) (void);
+
+/**
+ * \brief End of transfer callback function type.
+ * Registered by routine udd_ep_run()
+ * Callback called by USB interrupt after data transfer or abort (reset,...).
+ *
+ * \param status UDD_EP_TRANSFER_OK, if transfer is complete
+ * \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted
+ * \param n number of data transfered
+ */
+typedef void (*udd_callback_trans_t) (udd_ep_status_t status,
+ iram_size_t nb_transfered, udd_ep_id_t ep);
+
+/**
+ * \brief Authorizes the VBUS event
+ *
+ * \return true, if the VBUS monitoring is possible.
+ */
+bool udd_include_vbus_monitoring(void);
+
+/**
+ * \brief Enables the USB Device mode
+ */
+void udd_enable(void);
+
+/**
+ * \brief Disables the USB Device mode
+ */
+void udd_disable(void);
+
+/**
+ * \brief Attach device to the bus when possible
+ *
+ * \warning If a VBus control is included in driver,
+ * then it will attach device when an acceptable Vbus
+ * level from the host is detected.
+ */
+void udd_attach(void);
+
+/**
+ * \brief Detaches the device from the bus
+ *
+ * The driver must remove pull-up on USB line D- or D+.
+ */
+void udd_detach(void);
+
+/**
+ * \brief Test whether the USB Device Controller is running at high
+ * speed or not.
+ *
+ * \return \c true if the Device is running at high speed mode, otherwise \c false.
+ */
+bool udd_is_high_speed(void);
+
+/**
+ * \brief Changes the USB address of device
+ *
+ * \param address New USB address
+ */
+void udd_set_address(uint8_t address);
+
+/**
+ * \brief Returns the USB address of device
+ *
+ * \return USB address
+ */
+uint8_t udd_getaddress(void);
+
+/**
+ * \brief Returns the current start of frame number
+ *
+ * \return current start of frame number.
+ */
+uint16_t udd_get_frame_number(void);
+
+/**
+ * \brief Returns the current micro start of frame number
+ *
+ * \return current micro start of frame number required in high speed mode.
+ */
+uint16_t udd_get_micro_frame_number(void);
+
+/*! \brief The USB driver sends a resume signal called Upstream Resume
+ */
+void udd_send_remotewakeup(void);
+
+/**
+ * \brief Load setup payload
+ *
+ * \param payload Pointer on payload
+ * \param payload_size Size of payload
+ */
+void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );
+
+
+/**
+ * \name Endpoint Management
+ *
+ * The following functions allow drivers to create and remove
+ * endpoints, as well as set, clear and query their "halted" and
+ * "wedged" states.
+ */
+//@{
+
+#if (USB_DEVICE_MAX_EP != 0)
+
+/**
+ * \brief Configures and enables an endpoint
+ *
+ * \param ep Endpoint number including direction (USB_EP_DIR_IN/USB_EP_DIR_OUT).
+ * \param bmAttributes Attributes of endpoint declared in the descriptor.
+ * \param MaxEndpointSize Endpoint maximum size
+ *
+ * \return \c 1 if the endpoint is enabled, otherwise \c 0.
+ */
+bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
+ uint16_t MaxEndpointSize);
+
+/**
+ * \brief Disables an endpoint
+ *
+ * \param ep Endpoint number including direction (USB_EP_DIR_IN/USB_EP_DIR_OUT).
+ */
+void udd_ep_free(udd_ep_id_t ep);
+
+/**
+ * \brief Check if the endpoint \a ep is halted.
+ *
+ * \param ep The ID of the endpoint to check.
+ *
+ * \return \c 1 if \a ep is halted, otherwise \c 0.
+ */
+bool udd_ep_is_halted(udd_ep_id_t ep);
+
+/**
+ * \brief Set the halted state of the endpoint \a ep
+ *
+ * After calling this function, any transaction on \a ep will result
+ * in a STALL handshake being sent. Any pending transactions will be
+ * performed first, however.
+ *
+ * \param ep The ID of the endpoint to be halted
+ *
+ * \return \c 1 if \a ep is halted, otherwise \c 0.
+ */
+bool udd_ep_set_halt(udd_ep_id_t ep);
+
+/**
+ * \brief Clear the halted state of the endpoint \a ep
+ *
+ * After calling this function, any transaction on \a ep will
+ * be handled normally, i.e. a STALL handshake will not be sent, and
+ * the data toggle sequence will start at DATA0.
+ *
+ * \param ep The ID of the endpoint to be un-halted
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+bool udd_ep_clear_halt(udd_ep_id_t ep);
+
+/**
+ * \brief Registers a callback to call when endpoint halt is cleared
+ *
+ * \param ep The ID of the endpoint to use
+ * \param callback NULL or function to call when endpoint halt is cleared
+ *
+ * \warning if the endpoint is not halted then the \a callback is called immediately.
+ *
+ * \return \c 1 if the register is accepted, otherwise \c 0.
+ */
+bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
+ udd_callback_halt_cleared_t callback);
+
+/**
+ * \brief Allows to receive or send data on an endpoint
+ *
+ * The driver uses a specific DMA USB to transfer data
+ * from internal RAM to endpoint, if this one is available.
+ * When the transfer is finished or aborted (stall, reset, ...), the \a callback is called.
+ * The \a callback returns the transfer status and eventually the number of byte transfered.
+ * Note: The control endpoint is not authorized.
+ *
+ * \param ep The ID of the endpoint to use
+ * \param b_shortpacket Enabled automatic short packet
+ * \param buf Buffer on Internal RAM to send or fill.
+ * It must be align, then use COMPILER_WORD_ALIGNED.
+ * \param buf_size Buffer size to send or fill
+ * \param callback NULL or function to call at the end of transfer
+ *
+ * \warning About \a b_shortpacket, for IN endpoint it means that a short packet
+ * (or a Zero Length Packet) will be sent to the USB line to properly close the usb
+ * transfer at the end of the data transfer.
+ * For Bulk and Interrupt OUT endpoint, it will automatically stop the transfer
+ * at the end of the data transfer (received short packet).
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
+ uint8_t *buf, iram_size_t buf_size,
+ udd_callback_trans_t callback);
+/**
+ * \brief Aborts transfer on going on endpoint
+ *
+ * If a transfer is on going, then it is stopped and
+ * the callback registered is called to signal the end of transfer.
+ * Note: The control endpoint is not authorized.
+ *
+ * \param ep Endpoint to abort
+ */
+void udd_ep_abort(udd_ep_id_t ep);
+
+#endif
+
+//@}
+
+
+/**
+ * \name High speed test mode management
+ *
+ * The following functions allow the device to jump to a specific test mode required in high speed mode.
+ */
+//@{
+void udd_test_mode_j(void);
+void udd_test_mode_k(void);
+void udd_test_mode_se0_nak(void);
+void udd_test_mode_packet(void);
+//@}
+
+
+/**
+ * \name UDC callbacks to provide for UDD
+ *
+ * The following callbacks are used by UDD.
+ */
+//@{
+
+/**
+ * \brief Decodes and manages a setup request
+ *
+ * The driver call it when a SETUP packet is received.
+ * The \c udd_g_ctrlreq contains the data of SETUP packet.
+ * If this callback accepts the setup request then it must
+ * return \c 1 and eventually update \c udd_g_ctrlreq to send or receive data.
+ *
+ * \return \c 1 if the request is accepted, otherwise \c 0.
+ */
+extern bool udc_process_setup(void);
+
+/**
+ * \brief Reset the UDC
+ *
+ * The UDC must reset all configuration.
+ */
+extern void udc_reset(void);
+
+/**
+ * \brief To signal that a SOF is occurred
+ *
+ * The UDC must send the signal to all UDIs enabled
+ */
+extern void udc_sof_notify(void);
+
+//@}
+
+//@}
+
+#ifdef __cplusplus
+}
+#endif
+#endif // _UDD_H_