diff options
author | James Young <18669334+noroadsleft@users.noreply.github.com> | 2020-11-28 12:02:18 -0800 |
---|---|---|
committer | Drashna Jael're <drashna@live.com> | 2021-01-12 22:46:05 -0800 |
commit | 4d8d69237d0a9e73e1723480e4225c9390533021 (patch) | |
tree | 633dc5903f4e8db2f9f601bff0205713df5d16a4 /tmk_core/protocol/arm_atsam/led_matrix.h | |
parent | 546a0e1edccaa7a53ae72c124f792783009b693b (diff) |
2020 November 28 Breaking Changes Update (#11053)
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
Diffstat (limited to 'tmk_core/protocol/arm_atsam/led_matrix.h')
-rw-r--r-- | tmk_core/protocol/arm_atsam/led_matrix.h | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/tmk_core/protocol/arm_atsam/led_matrix.h b/tmk_core/protocol/arm_atsam/led_matrix.h deleted file mode 100644 index 8eaa5623bd..0000000000 --- a/tmk_core/protocol/arm_atsam/led_matrix.h +++ /dev/null @@ -1,158 +0,0 @@ -/* -Copyright 2018 Massdrop Inc. - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef _LED_MATRIX_H_ -#define _LED_MATRIX_H_ - -#include "quantum.h" - -// From keyboard -#include "config_led.h" - -// CS1-CS16 Current Source "Col" -#define ISSI3733_CS_COUNT 16 - -// SW1-SW12 Switch "Row" -#define ISSI3733_SW_COUNT 12 - -#define ISSI3733_LED_RGB_COUNT ISSI3733_CS_COUNT *ISSI3733_SW_COUNT -#define ISSI3733_PG0_BYTES ISSI3733_LED_RGB_COUNT / 8 + 1 //+1 for first byte being memory start offset for I2C transfer -#define ISSI3733_PG1_BYTES ISSI3733_LED_RGB_COUNT + 1 //+1 for first byte being memory start offset for I2C transfer -#define ISSI3733_PG2_BYTES ISSI3733_LED_RGB_COUNT + 1 //+1 for first byte being memory start offset for I2C transfer -#define ISSI3733_PG3_BYTES 18 + 1 //+1 for first byte being memory start offset for I2C transfer - -#define ISSI3733_PG_ONOFF_BYTES ISSI3733_PG0_BYTES -#define ISSI3733_PG_OR_BYTES ISSI3733_PG0_BYTES -#define ISSI3733_PG_SR_BYTES ISSI3733_PG0_BYTES -#define ISSI3733_PG_PWM_BYTES ISSI3733_PG1_BYTES -#define ISSI3733_PG_ABM_BYTES ISSI3733_PG2_BYTES -#define ISSI3733_PG_FN_BYTES ISSI3733_PG3_BYTES - -typedef struct issi3733_driver_s { - uint8_t addr; // Address of the driver according to wiring "ISSI3733: Table 1 Slave Address" - uint8_t onoff[ISSI3733_PG_ONOFF_BYTES]; // PG0 - LED Control Register - LED On/Off Register - uint8_t open[ISSI3733_PG_OR_BYTES]; // PG0 - LED Control Register - LED Open Register - uint8_t shrt[ISSI3733_PG_SR_BYTES]; // PG0 - LED Control Register - LED Short Register - uint8_t pwm[ISSI3733_PG_PWM_BYTES]; // PG1 - PWM Register - uint8_t abm[ISSI3733_PG_ABM_BYTES]; // PG2 - Auto Breath Mode Register - uint8_t conf[ISSI3733_PG_FN_BYTES]; // PG3 - Function Register -} issi3733_driver_t; - -typedef struct issi3733_rgb_s { - uint8_t *r; // Direct access into PWM data - uint8_t *g; // Direct access into PWM data - uint8_t *b; // Direct access into PWM data -} issi3733_rgb_t; - -typedef struct issi3733_rgb_adr_s { - uint8_t drv; // Driver from given list - uint8_t cs; // CS - uint8_t swr; // SW Red - uint8_t swg; // SW Green - uint8_t swb; // SW Blue -} issi3733_rgb_adr_t; - -typedef struct issi3733_led_s { - uint8_t id; // According to PCB ref - issi3733_rgb_t rgb; // PWM settings of R G B - issi3733_rgb_adr_t adr; // Hardware addresses - float x; // Physical position X - float y; // Physical position Y - float px; // Physical position X in percent - float py; // Physical position Y in percent - uint8_t scan; // Key scan code from wiring (set 0xFF if no key) -} issi3733_led_t; - -extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; - -extern uint8_t gcr_desired; -extern uint8_t gcr_breathe; -extern uint8_t gcr_actual; -extern uint8_t gcr_actual_last; - -void gcr_compute(void); - -void led_matrix_indicators(void); - -/*------------------------- Legacy Lighting Support ------------------------*/ - -#ifdef USE_MASSDROP_CONFIGURATOR - -# define EF_NONE 0x00000000 // No effect -# define EF_OVER 0x00000001 // Overwrite any previous color information with new -# define EF_SCR_L 0x00000002 // Scroll left -# define EF_SCR_R 0x00000004 // Scroll right -# define EF_SUBTRACT 0x00000008 // Subtract color values - -typedef struct led_setup_s { - float hs; // Band begin at percent - float he; // Band end at percent - uint8_t rs; // Red start value - uint8_t re; // Red end value - uint8_t gs; // Green start value - uint8_t ge; // Green end value - uint8_t bs; // Blue start value - uint8_t be; // Blue end value - uint32_t ef; // Animation and color effects - uint8_t end; // Set to signal end of the setup -} led_setup_t; - -extern const uint8_t led_setups_count; -extern void * led_setups[]; - -// LED Extra Instructions -# define LED_FLAG_NULL 0x00 // Matching and coloring not used (default) -# define LED_FLAG_MATCH_ID 0x01 // Match on the ID of the LED (set id#'s to desired bit pattern, first LED is id 1) -# define LED_FLAG_MATCH_LAYER 0x02 // Match on the current active layer (set layer to desired match layer) -# define LED_FLAG_USE_RGB 0x10 // Use a specific RGB value (set r, g, b to desired output color values) -# define LED_FLAG_USE_PATTERN 0x20 // Use a specific pattern ID (set pattern_id to desired output pattern) -# define LED_FLAG_USE_ROTATE_PATTERN 0x40 // Use pattern the user has cycled to manually - -typedef struct led_instruction_s { - uint16_t flags; // Bitfield for LED instructions - uint32_t id0; // Bitwise id, IDs 0-31 - uint32_t id1; // Bitwise id, IDs 32-63 - uint32_t id2; // Bitwise id, IDs 64-95 - uint32_t id3; // Bitwise id, IDs 96-127 - uint8_t layer; - uint8_t r; - uint8_t g; - uint8_t b; - uint8_t pattern_id; - uint8_t end; -} led_instruction_t; - -extern led_instruction_t led_instructions[]; - -extern uint8_t led_animation_breathing; -extern uint8_t led_animation_id; -extern float led_animation_speed; -extern uint8_t led_lighting_mode; -extern uint8_t led_enabled; -extern uint8_t led_animation_breathe_cur; -extern uint8_t led_animation_direction; -extern uint8_t breathe_dir; - -# define LED_MODE_NORMAL 0 // Must be 0 -# define LED_MODE_KEYS_ONLY 1 -# define LED_MODE_NON_KEYS_ONLY 2 -# define LED_MODE_INDICATORS_ONLY 3 -# define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY // Must be highest value - -#endif // USE_MASSDROP_CONFIGURATOR - -#endif //_LED_MATRIX_H_ |