summaryrefslogtreecommitdiff
path: root/tmk_core/common/chibios
diff options
context:
space:
mode:
authorNick Brassel <nick@tzarc.org>2020-07-16 16:58:14 +1000
committerJames Young <18669334+noroadsleft@users.noreply.github.com>2020-08-29 14:30:02 -0700
commit93e7a8f74cc2c9c7bc50b413654642a0347a55d2 (patch)
tree60bb1683c096dff9f9c1b515f9b570d18e7a0ff3 /tmk_core/common/chibios
parentd0abad27abd6d58f88985c1c28463ee51b7a116e (diff)
Add dual-bank STM32 bootloader support, given GPIO toggle on BOOT0 to charge RC circuit. (#8778)
Diffstat (limited to 'tmk_core/common/chibios')
-rw-r--r--tmk_core/common/chibios/bootloader.c84
1 files changed, 69 insertions, 15 deletions
diff --git a/tmk_core/common/chibios/bootloader.c b/tmk_core/common/chibios/bootloader.c
index 4cf5dae7e6..dceeaa6b19 100644
--- a/tmk_core/common/chibios/bootloader.c
+++ b/tmk_core/common/chibios/bootloader.c
@@ -3,28 +3,82 @@
#include "ch.h"
#include "hal.h"
-#ifdef STM32_BOOTLOADER_ADDRESS
-/* STM32 */
-
/* This code should be checked whether it runs correctly on platforms */
-# define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
+#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0))
+#define BOOTLOADER_MAGIC 0xDEADBEEF
+#define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4)
+
+#ifndef STM32_BOOTLOADER_DUAL_BANK
+# define STM32_BOOTLOADER_DUAL_BANK FALSE
+#endif
+
+#if STM32_BOOTLOADER_DUAL_BANK
+
+// Need pin definitions
+# include "config_common.h"
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO
+# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle"
+# endif
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY
+# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0
+# endif
+
+# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY
+# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000
+# endif
+
+extern uint32_t __ram0_end__;
+
+# define bootdelay(loopcount) \
+ do { \
+ for (int i = 0; i < loopcount; ++i) { \
+ __asm__ volatile("nop\n\t" \
+ "nop\n\t" \
+ "nop\n\t"); \
+ } \
+ } while (0)
+
+void bootloader_jump(void) {
+ *MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
+ NVIC_SystemReset();
+}
+
+void enter_bootloader_mode_if_requested(void) {
+ unsigned long *check = MAGIC_ADDR;
+ if (*check == BOOTLOADER_MAGIC) {
+ *check = 0;
+
+ // For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash
+ // bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do
+ // it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to
+ // BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord
+ // #hardware channel pins for an example circuit.
+ palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL);
+# if STM32_BOOTLOADER_DUAL_BANK_POLARITY
+ palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
+# else
+ palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO));
+# endif
+
+ // Wait for a while for the capacitor to charge
+ bootdelay(STM32_BOOTLOADER_DUAL_BANK_DELAY);
+
+ // Issue a system reset to get the ROM bootloader to execute, with BOOT0 high
+ NVIC_SystemReset();
+ }
+}
+
+#elif defined(STM32_BOOTLOADER_ADDRESS) // STM32_BOOTLOADER_DUAL_BANK
+
extern uint32_t __ram0_end__;
-# define BOOTLOADER_MAGIC 0xDEADBEEF
-# define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4)
-/** \brief Jump to the bootloader
- *
- * FIXME: needs doc
- */
void bootloader_jump(void) {
*MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
NVIC_SystemReset();
}
-/** \brief Enter bootloader mode if requested
- *
- * FIXME: needs doc
- */
void enter_bootloader_mode_if_requested(void) {
unsigned long *check = MAGIC_ADDR;
if (*check == BOOTLOADER_MAGIC) {
@@ -41,7 +95,7 @@ void enter_bootloader_mode_if_requested(void) {
}
}
-#elif defined(KL2x) || defined(K20x) /* STM32_BOOTLOADER_ADDRESS */
+#elif defined(KL2x) || defined(K20x) // STM32_BOOTLOADER_DUAL_BANK // STM32_BOOTLOADER_ADDRESS
/* Kinetis */
# if defined(KIIBOHD_BOOTLOADER)