feat: allows to take over the rgb leds and light them individually from raw hid

2 files changed, 84 insertions, 14 deletions

diff --git a/quantum/oryx.c b/quantum/oryx.c
index 6a5fb0c354..f3172c3e07 100644
--- a/quantum/oryx.c
+++ b/quantum/oryx.c
@@ -8,6 +8,13 @@ keypos_t keyboard_pairing_sequence[PAIRING_SEQUENCE_SIZE];
 keypos_t host_pairing_sequence[PAIRING_SEQUENCE_SIZE];
 uint8_t  pairing_input_index = 0;
 
+void oryx_error(uint8_t code) {
+    uint8_t event[RAW_EPSIZE];
+    event[0] = ORYX_EVT_ERROR;
+    event[1] = code;
+    raw_hid_send(event, RAW_EPSIZE);
+}
+
 void raw_hid_receive(uint8_t *data, uint8_t length) {
     uint8_t  command   = data[0];
     uint8_t *param     = &data[1];
@@ -45,11 +52,33 @@ void raw_hid_receive(uint8_t *data, uint8_t length) {
             break;
 
         case ORYX_SET_LAYER:
-            if(rawhid_state.paired == true) {
+            if (rawhid_state.paired == true) {
                 layer_clear();
                 layer_on(param[0]);
             }
             break;
+
+        case ORYX_RGB_CONTROL:
+#if defined(RGB_MATRIX_ENABLE) && !defined(KEYBOARD_ergodox_ez_glow)
+            if (param[0] == 0) {
+                rgb_matrix_reload_from_eeprom();
+                rawhid_state.rgb_control = false;
+            } else {
+                rgb_matrix_mode_noeeprom(RGB_MATRIX_CUSTOM_oryx_webhid_effect);
+                rawhid_state.rgb_control = true;
+            }
+#else
+            oryx_error(ORYX_ERR_RGB_MATRIX_NOT_ENABLED);
+#endif
+            break;
+
+        case ORYX_SET_RGB_LED:
+#if defined(RGB_MATRIX_ENABLE) && !defined(KEYBOARD_ergodox_ez_glow)
+            webhid_leds[param[0]] = (RGB){.r = param[1], .g = param[2], .b = param[3]};
+#else
+            oryx_error(ORYX_ERR_RGB_MATRIX_NOT_ENABLED);
+#endif
+            break;
     }
 }
 
@@ -122,7 +151,6 @@ bool compare_sequences(keypos_t a[PAIRING_SEQUENCE_SIZE], keypos_t b[PAIRING_SEQ
 }
 
 void pairing_validate_handler() {
-    
     uint8_t event[RAW_EPSIZE];
     bool    valid = compare_sequences(keyboard_pairing_sequence, host_pairing_sequence);
 
@@ -153,6 +181,16 @@ keypos_t get_random_keypos(void) {
     }
 }
 
+keypos_t *pairing_sequence(void) {
+    // The pairing sequence is derived from Oryx's layout id declared
+    // in the generated source config file with the FIRMWARE_VERSION define.
+    keypos_t *sequence = (keypos_t *)&host_pairing_sequence[0];
+    for (uint8_t i = 0; i < PAIRING_SEQUENCE_SIZE; i++) {
+    }
+
+    return sequence;
+}
+
 void create_pairing_code(void) {
     for (uint8_t i = 0; i < PAIRING_SEQUENCE_SIZE; i++) {
         keypos_t pos                 = get_random_keypos();
diff --git a/quantum/oryx.h b/quantum/oryx.h
index 526299b4aa..25deb74f55 100644
--- a/quantum/oryx.h
+++ b/quantum/oryx.h
@@ -1,4 +1,15 @@
 #pragma once
+/*
+The Oryx Webhid protocol
+
+Each HID packet is a series of bytes.  The first byte is the packet type is the command. The rest of the bytes are the params.
+
+Before sending a packet, the host needs to be paired or should request a pairing code.
+
+The pairing code is a sequence of key positions derived from Oryx's firmware version code stored in the FIRMWARE_VERSION define.
+
+Once the host has paired, it can freely use the commands define in the Oryx_Command_Code enum for which the board will always respond with a Oryx_Event_Code or a Oryx_Error_Code.
+*/
 
 #include "quantum.h"
 #include "raw_hid.h"
@@ -10,6 +21,7 @@
 #    define RAW_EPSIZE 32
 #endif
 
+#define ORYX_PROTOCOL_VERSION = 0x01
 #define ORYX_STOP_BIT -2
 #define PAIRING_BLINK_STEPS 512
 #define PAIRING_BLINK_END PAIRING_BLINK_STEPS * 60
@@ -22,7 +34,10 @@ enum Oryx_Command_Code {
     ORYX_CMD_PAIRING_INIT,
     ORYX_CMD_PAIRING_VALIDATE,
     ORYX_CMD_DISCONNECT,
-    ORYX_SET_LAYER
+    ORYX_SET_LAYER,
+    ORYX_RGB_CONTROL,
+    ORYX_SET_RGB_LED,
+    ORYX_GET_PROTOCOL_VERSION = 0xFE,
 };
 
 enum Oryx_Event_Code {
@@ -34,6 +49,16 @@ enum Oryx_Event_Code {
     ORYX_EVT_LAYER,
     ORYX_EVT_KEYDOWN,
     ORYX_EVT_KEYUP,
+    ORYX_EVT_GET_PROTOCOL_VERSION = 0XFE,
+    ORYX_EVT_ERROR                = 0xFF,
+};
+
+enum Oryx_Error_Code {
+    ORYX_ERR_PAIRING_INIT_FAILED,
+    ORYX_ERR_PAIRING_INPUT_FAILED,
+    ORYX_ERR_PAIRING_KEY_INPUT_FAILED,
+    ORYX_ERR_PAIRING_FAILED,
+    ORYX_ERR_RGB_MATRIX_NOT_ENABLED,
 };
 
 extern bool oryx_state_live_training_enabled;
@@ -41,23 +66,30 @@ extern bool oryx_state_live_training_enabled;
 typedef struct {
     bool pairing;
     bool paired;
+    bool rgb_control;
 } rawhid_state_t;
 
 extern rawhid_state_t rawhid_state;
 
-void     create_pairing_code(void);
-bool     store_pairing_sequence(keypos_t* pairing_sequence);
-keypos_t get_random_keypos(void);
-void     pairing_init_handler(void);
-void     pairing_validate_handler(void);
-void     pairing_validate_eeprom_handler(void);
-void     pairing_init_event(void);
-bool     compare_sequences(keypos_t a[PAIRING_SEQUENCE_SIZE], keypos_t b[PAIRING_SEQUENCE_SIZE]);
-void     pairing_key_input_event(void);
-void     pairing_failed_event(void);
-void     pairing_succesful_event(void);
+void      create_pairing_code(void);
+void      oryx_error(uint8_t code);
+bool      store_pairing_sequence(keypos_t* pairing_sequence);
+keypos_t  get_random_keypos(void);
+void      pairing_init_handler(void);
+void      pairing_validate_handler(void);
+void      pairing_validate_eeprom_handler(void);
+void      pairing_init_event(void);
+bool      compare_sequences(keypos_t a[PAIRING_SEQUENCE_SIZE], keypos_t b[PAIRING_SEQUENCE_SIZE]);
+void      pairing_key_input_event(void);
+void      pairing_failed_event(void);
+void      pairing_succesful_event(void);
+keypos_t* pairing_sequence(void);
 
 void oryx_layer_event(void);
 bool is_oryx_live_training_enabled(void);
 bool process_record_oryx(uint16_t keycode, keyrecord_t* record);
 void layer_state_set_oryx(layer_state_t state);
+
+#if defined(RGB_MATRIX_ENABLE) && !defined(KEYBOARD_ergodox_ez_glow)
+RGB webhid_leds[DRIVER_LED_TOTAL];
+#endif
\ No newline at end of file