Squashed 'tmk_core/' content from commit 05caacc

git-subtree-dir: tmk_core
git-subtree-split: 05caaccec92694bb24c8c3c3a9940b96efd4605c

3 files changed, 258 insertions, 0 deletions

diff --git a/protocol/usb_hid/test/Makefile b/protocol/usb_hid/test/Makefile
new file mode 100644
index 0000000000..83bf2aed67
--- /dev/null
+++ b/protocol/usb_hid/test/Makefile
@@ -0,0 +1,126 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = usb_hid_test
+
+TMK_DIR = ../../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# MCU name
+MCU = atmega32u4
+
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+
+# Build Options
+#   comment out to disable the options.
+#
+# Console for debug
+OPT_DEFS += -DCONSOLE_ENABLE
+
+# Boot Section Size in bytes
+#   Teensy halfKay   512
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#OPT_DEFS += -DBOOT_SIZE=4096
+
+
+
+SRC =  test.cpp
+SRC += common/debug.c
+SRC += common/print.c
+
+CONFIG_H = config.h
+
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+VPATH += $(TMK_DIR)/common
+
+
+
+# program Leonardo
+PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex
+
+
+
+include $(TMK_DIR)/protocol/usb_hid.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/rules.mk
diff --git a/protocol/usb_hid/test/config.h b/protocol/usb_hid/test/config.h
new file mode 100644
index 0000000000..c2230fb570
--- /dev/null
+++ b/protocol/usb_hid/test/config.h
@@ -0,0 +1,40 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCAFE
+#define DEVICE_VER      0x0814
+#define MANUFACTURER    t.m.k.
+#define PRODUCT         USB to USB keyboard converter
+
+
+#define DESCRIPTION     Product from t.m.k. keyboard firmware project
+
+
+/* matrix size */
+#define MATRIX_ROWS 32
+#define MATRIX_COLS 8
+
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT))) 
+
+#endif
diff --git a/protocol/usb_hid/test/test.cpp b/protocol/usb_hid/test/test.cpp
new file mode 100644
index 0000000000..4958f0c619
--- /dev/null
+++ b/protocol/usb_hid/test/test.cpp
@@ -0,0 +1,92 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <util/delay.h>
+#include <Arduino.h>
+
+// USB HID host
+#include "Usb.h"
+#include "hid.h"
+#include "hidboot.h"
+#include "parser.h"
+
+// LUFA
+#include "lufa.h"
+
+#include "debug.h"
+
+#include "leonardo_led.h"
+
+
+static USB     usb_host;
+static HIDBoot<HID_PROTOCOL_KEYBOARD>    kbd(&usb_host);
+static KBDReportParser kbd_parser;
+
+static void LUFA_setup(void)
+{
+    /* Disable watchdog if enabled by bootloader/fuses */
+    MCUSR &= ~(1 << WDRF);
+    wdt_disable();
+
+    /* Disable clock division */
+    clock_prescale_set(clock_div_1);
+
+    // Leonardo needs. Without this USB device is not recognized.
+    USB_Disable();
+
+    USB_Init();
+
+    // for Console_Task
+    USB_Device_EnableSOFEvents();
+}
+
+static void HID_setup()
+{
+    // Arduino Timer startup: wiring.c
+    init();
+
+    if (usb_host.Init() == -1) {
+        debug("HID init: failed\n");
+        LED_TX_OFF;
+    }
+  
+    _delay_ms(200);
+      
+    kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser);
+}
+
+int main(void)
+{
+    // LED for debug
+    LED_TX_INIT;
+    LED_TX_ON;
+
+    print_enable = true;
+    debug_enable = true;
+    debug_matrix = true;
+    debug_keyboard = true;
+    debug_mouse = true;
+
+    LUFA_setup();
+    sei();
+
+    // wait for startup of sendchar routine
+    while (USB_DeviceState != DEVICE_STATE_Configured) ;
+    if (debug_enable) {
+        _delay_ms(1000);
+    }
+
+    HID_setup();
+    
+    debug("init: done\n");
+    for (;;) {
+        usb_host.Task();
+
+#if !defined(INTERRUPT_CONTROL_ENDPOINT)
+        // LUFA Task for control request
+        USB_USBTask();
+#endif
+    }
+        
+    return 0;
+}