Merge https://github.com/qmk/qmk_firmware

6 files changed, 1104 insertions, 0 deletions

diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h
new file mode 100644
index 0000000000..0ec4635eb0
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Config/LUFAConfig.h
@@ -0,0 +1,126 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+//		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define INTERRUPT_CONTROL_ENDPOINT
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//		#define NO_AUTO_VBUS_MANAGEMENT
+//		#define INVERTED_VBUS_ENABLE_LINE
+
+	#elif (ARCH == ARCH_XMEGA)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+//		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+//		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      8
+//		#define DEVICE_STATE_AS_GPIOR            {Insert Value Here}
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+		#define MAX_ENDPOINT_INDEX               4
+//		#define NO_DEVICE_REMOTE_WAKEUP
+//		#define NO_DEVICE_SELF_POWER
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c
new file mode 100644
index 0000000000..96596c1619
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c
@@ -0,0 +1,205 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Peter Lawrence (majbthrd [at] gmail [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ *  computer-readable structures which the host requests upon device enumeration, to determine
+ *  the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ *  device characteristics, including the supported USB version, control endpoint size and the
+ *  number of device configurations. The descriptor is read out by the USB host when the enumeration
+ *  process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+	.USBSpecification       = VERSION_BCD(1,1,0),
+	.Class                  = 0x00,
+	.SubClass               = 0x00,
+	.Protocol               = 0x00,
+
+	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
+
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2065,
+	.ReleaseNumber          = VERSION_BCD(0,0,1),
+
+	.ManufacturerStrIndex   = STRING_ID_Manufacturer,
+	.ProductStrIndex        = STRING_ID_Product,
+	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
+
+	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ *  of the device in one of its supported configurations, including information about any device interfaces
+ *  and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ *  a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+	.Config =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+			.TotalInterfaces        = 1,
+
+			.ConfigurationNumber    = 1,
+			.ConfigurationStrIndex  = NO_DESCRIPTOR,
+
+			.ConfigAttributes       = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED),
+
+			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
+		},
+
+	.TM_Interface =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+			.InterfaceNumber        = INTERFACE_ID_TestAndMeasurement,
+			.AlternateSetting       = 0x00,
+
+			.TotalEndpoints         = 3,
+
+			.Class                  = 0xFE,
+			.SubClass               = 0x03,
+			.Protocol               = 0x01,
+
+			.InterfaceStrIndex      = NO_DESCRIPTOR
+		},
+
+	.TM_DataOutEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = TMC_OUT_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = TMC_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.TM_DataInEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = TMC_IN_EPADDR,
+			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = TMC_IO_EPSIZE,
+			.PollingIntervalMS      = 0x05
+		},
+
+	.TM_NotificationEndpoint =
+		{
+			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+			.EndpointAddress        = TMC_NOTIFICATION_EPADDR,
+			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+			.EndpointSize           = TMC_NOTIFICATION_EPSIZE,
+			.PollingIntervalMS      = 0xFF
+		}
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ *  the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ *  via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG);
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ *  form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString = USB_STRING_DESCRIPTOR(L"Dean Camera");
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ *  and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ *  Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR(L"LUFA TMC Demo");
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ *  documentation) by the application code so that the address and size of a requested descriptor can be given
+ *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ *  USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint16_t wIndex,
+                                    const void** const DescriptorAddress)
+{
+	const uint8_t  DescriptorType   = (wValue >> 8);
+	const uint8_t  DescriptorNumber = (wValue & 0xFF);
+
+	const void* Address = NULL;
+	uint16_t    Size    = NO_DESCRIPTOR;
+
+	switch (DescriptorType)
+	{
+		case DTYPE_Device:
+			Address = &DeviceDescriptor;
+			Size    = sizeof(USB_Descriptor_Device_t);
+			break;
+		case DTYPE_Configuration:
+			Address = &ConfigurationDescriptor;
+			Size    = sizeof(USB_Descriptor_Configuration_t);
+			break;
+		case DTYPE_String:
+			switch (DescriptorNumber)
+			{
+				case STRING_ID_Language:
+					Address = &LanguageString;
+					Size    = pgm_read_byte(&LanguageString.Header.Size);
+					break;
+				case STRING_ID_Manufacturer:
+					Address = &ManufacturerString;
+					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
+					break;
+				case STRING_ID_Product:
+					Address = &ProductString;
+					Size    = pgm_read_byte(&ProductString.Header.Size);
+					break;
+			}
+
+			break;
+	}
+
+	*DescriptorAddress = Address;
+	return Size;
+}
+
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h
new file mode 100644
index 0000000000..628b63a503
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h
@@ -0,0 +1,104 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2010  Peter Lawrence (majbthrd [at] gmail [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *
+ *  Header file for Descriptors.c.
+ */
+
+#ifndef _DESCRIPTORS_H_
+#define _DESCRIPTORS_H_
+
+	/* Includes: */
+		#include <avr/pgmspace.h>
+
+		#include <LUFA/Drivers/USB/USB.h>
+
+	/* Macros: */
+		/** Endpoint address of the TMC notification IN endpoint. */
+		#define TMC_NOTIFICATION_EPADDR  (ENDPOINT_DIR_IN  | 2)
+
+		/** Endpoint address of the TMC device-to-host data IN endpoint. */
+		#define TMC_IN_EPADDR            (ENDPOINT_DIR_IN  | 3)
+
+		/** Endpoint address of the TMC host-to-device data OUT endpoint. */
+		#define TMC_OUT_EPADDR           (ENDPOINT_DIR_OUT | 4)
+
+		/** Size in bytes of the TMC data endpoints. */
+		#define TMC_IO_EPSIZE            64
+
+		/** Size in bytes of the TMC notification endpoint. */
+		#define TMC_NOTIFICATION_EPSIZE  8
+
+	/* Type Defines: */
+		/** Type define for the device configuration descriptor structure. This must be defined in the
+		 *  application code, as the configuration descriptor contains several sub-descriptors which
+		 *  vary between devices, and which describe the device's usage to the host.
+		 */
+		typedef struct
+		{
+			USB_Descriptor_Configuration_Header_t Config;
+
+			// Test and Measurement Interface
+			USB_Descriptor_Interface_t            TM_Interface;
+			USB_Descriptor_Endpoint_t             TM_DataOutEndpoint;
+			USB_Descriptor_Endpoint_t             TM_DataInEndpoint;
+			USB_Descriptor_Endpoint_t             TM_NotificationEndpoint;
+		} USB_Descriptor_Configuration_t;
+
+		/** Enum for the device interface descriptor IDs within the device. Each interface descriptor
+		 *  should have a unique ID index associated with it, which can be used to refer to the
+		 *  interface from other descriptors.
+		 */
+		enum InterfaceDescriptors_t
+		{
+			INTERFACE_ID_TestAndMeasurement = 0, /**< Test and measurement interface descriptor ID */
+		};
+
+		/** Enum for the device string descriptor IDs within the device. Each string descriptor should
+		 *  have a unique ID index associated with it, which can be used to refer to the string from
+		 *  other descriptors.
+		 */
+		enum StringDescriptors_t
+		{
+			STRING_ID_Language     = 0, /**< Supported Languages string descriptor ID (must be zero) */
+			STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */
+			STRING_ID_Product      = 2, /**< Product string ID */
+		};
+
+	/* Function Prototypes: */
+		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+		                                    const uint16_t wIndex,
+		                                    const void** const DescriptorAddress)
+		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
new file mode 100644
index 0000000000..c324be2d13
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c
@@ -0,0 +1,476 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#include "TestAndMeasurement.h"
+
+/** Contains the (usually static) capabilities of the TMC device. This table is requested by the
+ *  host upon enumeration to give it information on what features of the Test and Measurement USB
+ *  Class the device supports.
+ */
+TMC_Capabilities_t Capabilities =
+	{
+		.Status     = TMC_STATUS_SUCCESS,
+		.TMCVersion = VERSION_BCD(1.00),
+
+		.Interface  =
+			{
+				.ListenOnly             = false,
+				.TalkOnly               = false,
+				.PulseIndicateSupported = false,
+			},
+
+		.Device     =
+			{
+				.SupportsAbortINOnMatch = false,
+			},
+	};
+
+/** Current TMC control request that is being processed */
+static uint8_t RequestInProgress = 0;
+
+/** Stream callback abort flag for bulk IN data */
+static bool IsTMCBulkINReset = false;
+
+/** Stream callback abort flag for bulk OUT data */
+static bool IsTMCBulkOUTReset = false;
+
+/** Last used tag value for data transfers */
+static uint8_t CurrentTransferTag = 0;
+
+/** Length of last data transfer, for reporting to the host in case an in-progress transfer is aborted */
+static uint16_t LastTransferLength = 0;
+
+/** Buffer to hold the next message to sent to the TMC host */
+static uint8_t NextResponseBuffer[64];
+
+/** Indicates the length of the next response to send */
+static uint8_t NextResponseLen;
+
+/** Main program entry point. This routine contains the overall program flow, including initial
+ *  setup of all components and the main program loop.
+ */
+int main(void)
+{
+	SetupHardware();
+
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+	GlobalInterruptEnable();
+
+	for (;;)
+	{
+		TMC_Task();
+		USB_USBTask();
+	}
+}
+
+/** Configures the board hardware and chip peripherals for the demo's functionality. */
+void SetupHardware(void)
+{
+#if (ARCH == ARCH_AVR8)
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+#elif (ARCH == ARCH_XMEGA)
+	/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
+	XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
+	XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
+
+	/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
+	XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+	XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
+
+	PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
+#endif
+
+	/* Hardware Initialization */
+	LEDs_Init();
+	USB_Init();
+}
+
+/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and
+ *  starts the library USB task to begin the enumeration and USB management process.
+ */
+void EVENT_USB_Device_Connect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+}
+
+/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
+ *  the status LEDs and stops the USB management and CDC management tasks.
+ */
+void EVENT_USB_Device_Disconnect(void)
+{
+	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
+}
+
+/** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration
+ *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.
+ */
+void EVENT_USB_Device_ConfigurationChanged(void)
+{
+	bool ConfigSuccess = true;
+
+	/* Setup TMC In, Out and Notification Endpoints */
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT, TMC_IO_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPADDR,  EP_TYPE_BULK, TMC_IO_EPSIZE, 1);
+	ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPADDR, EP_TYPE_BULK, TMC_IO_EPSIZE, 1);
+
+	/* Indicate endpoint configuration success or failure */
+	LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
+}
+
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
+ *  the device from the USB host before passing along unhandled control requests to the library for processing
+ *  internally.
+ */
+void EVENT_USB_Device_ControlRequest(void)
+{
+	uint8_t TMCRequestStatus = TMC_STATUS_SUCCESS;
+
+	/* Process TMC specific control requests */
+	switch (USB_ControlRequest.bRequest)
+	{
+		case Req_InitiateAbortBulkOut:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Check that no split transaction is already in progress and the data transfer tag is valid */
+				if (RequestInProgress != 0)
+				{
+					TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS;
+				}
+				else if (USB_ControlRequest.wValue != CurrentTransferTag)
+				{
+					TMCRequestStatus = TMC_STATUS_TRANSFER_NOT_IN_PROGRESS;
+				}
+				else
+				{
+					/* Indicate that all in-progress/pending data OUT requests should be aborted */
+					IsTMCBulkOUTReset = true;
+
+					/* Save the split request for later checking when a new request is received */
+					RequestInProgress = Req_InitiateAbortBulkOut;
+				}
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response byte */
+				Endpoint_Write_8(TMCRequestStatus);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_CheckAbortBulkOutStatus:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Check that an ABORT BULK OUT transaction has been requested and that the request has completed */
+				if (RequestInProgress != Req_InitiateAbortBulkOut)
+				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
+				else if (IsTMCBulkOUTReset)
+				  TMCRequestStatus = TMC_STATUS_PENDING;
+				else
+				  RequestInProgress = 0;
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response bytes */
+				Endpoint_Write_8(TMCRequestStatus);
+				Endpoint_Write_16_LE(0);
+				Endpoint_Write_32_LE(LastTransferLength);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_InitiateAbortBulkIn:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Check that no split transaction is already in progress and the data transfer tag is valid */
+				if (RequestInProgress != 0)
+				{
+					TMCRequestStatus = TMC_STATUS_SPLIT_IN_PROGRESS;
+				}
+				else if (USB_ControlRequest.wValue != CurrentTransferTag)
+				{
+					TMCRequestStatus = TMC_STATUS_TRANSFER_NOT_IN_PROGRESS;
+				}
+				else
+				{
+					/* Indicate that all in-progress/pending data IN requests should be aborted */
+					IsTMCBulkINReset = true;
+
+					/* Save the split request for later checking when a new request is received */
+					RequestInProgress = Req_InitiateAbortBulkIn;
+				}
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response bytes */
+				Endpoint_Write_8(TMCRequestStatus);
+				Endpoint_Write_8(CurrentTransferTag);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_CheckAbortBulkInStatus:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))
+			{
+				/* Check that an ABORT BULK IN transaction has been requested and that the request has completed */
+				if (RequestInProgress != Req_InitiateAbortBulkIn)
+				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
+				else if (IsTMCBulkINReset)
+				  TMCRequestStatus = TMC_STATUS_PENDING;
+				else
+				  RequestInProgress = 0;
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response bytes */
+				Endpoint_Write_8(TMCRequestStatus);
+				Endpoint_Write_16_LE(0);
+				Endpoint_Write_32_LE(LastTransferLength);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_InitiateClear:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				/* Check that no split transaction is already in progress */
+				if (RequestInProgress != 0)
+				{
+					Endpoint_Write_8(TMC_STATUS_SPLIT_IN_PROGRESS);
+				}
+				else
+				{
+					/* Indicate that all in-progress/pending data IN and OUT requests should be aborted */
+					IsTMCBulkINReset  = true;
+					IsTMCBulkOUTReset = true;
+
+					/* Save the split request for later checking when a new request is received */
+					RequestInProgress = Req_InitiateClear;
+				}
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response byte */
+				Endpoint_Write_8(TMCRequestStatus);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_CheckClearStatus:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				/* Check that a CLEAR transaction has been requested and that the request has completed */
+				if (RequestInProgress != Req_InitiateClear)
+				  TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;
+				else if (IsTMCBulkINReset || IsTMCBulkOUTReset)
+				  TMCRequestStatus = TMC_STATUS_PENDING;
+				else
+				  RequestInProgress = 0;
+
+				Endpoint_ClearSETUP();
+
+				/* Write the request response bytes */
+				Endpoint_Write_8(TMCRequestStatus);
+				Endpoint_Write_8(0);
+
+				Endpoint_ClearIN();
+				Endpoint_ClearStatusStage();
+			}
+
+			break;
+		case Req_GetCapabilities:
+			if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
+			{
+				Endpoint_ClearSETUP();
+
+				/* Write the device capabilities to the control endpoint */
+				Endpoint_Write_Control_Stream_LE(&Capabilities, sizeof(TMC_Capabilities_t));
+				Endpoint_ClearOUT();
+			}
+
+			break;
+	}
+}
+
+void ProcessSentMessage(uint8_t* const Data, const uint8_t Length)
+{
+	if (strncmp((char*)Data, "*IDN?", 5) == 0)
+	  strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
+
+	NextResponseLen = strlen((char*)NextResponseBuffer);
+}
+
+uint8_t GetNextMessage(uint8_t* const Data)
+{
+	  strcpy((char*)NextResponseBuffer, "LUFA TMC DEMO");
+
+	NextResponseLen = strlen((char*)NextResponseBuffer);
+// ---
+	uint8_t DataLen = MIN(NextResponseLen, 64);
+
+	strlcpy((char*)Data, (char*)NextResponseBuffer, DataLen);
+
+	return DataLen;
+}
+
+/** Function to manage TMC data transmission and reception to and from the host. */
+void TMC_Task(void)
+{
+	/* Device must be connected and configured for the task to run */
+	if (USB_DeviceState != DEVICE_STATE_Configured)
+	  return;
+
+	TMC_MessageHeader_t MessageHeader;
+	uint8_t             MessagePayload[128];
+
+	/* Try to read in a TMC message from the interface, process if one is available */
+	if (ReadTMCHeader(&MessageHeader))
+	{
+		/* Indicate busy */
+		LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+		switch (MessageHeader.MessageID)
+		{
+			case TMC_MESSAGEID_DEV_DEP_MSG_OUT:
+				LastTransferLength = 0;
+				while (Endpoint_Read_Stream_LE(MessagePayload, MIN(MessageHeader.TransferSize, sizeof(MessagePayload)), &LastTransferLength) ==
+				       ENDPOINT_RWSTREAM_IncompleteTransfer)
+				{
+					if (IsTMCBulkOUTReset)
+					  break;
+				}
+
+				Endpoint_ClearOUT();
+
+				ProcessSentMessage(MessagePayload, LastTransferLength);
+				break;
+			case TMC_MESSAGEID_DEV_DEP_MSG_IN:
+				Endpoint_ClearOUT();
+
+				MessageHeader.TransferSize = GetNextMessage(MessagePayload);
+				MessageHeader.MessageIDSpecific.DeviceOUT.LastMessageTransaction = true;
+				WriteTMCHeader(&MessageHeader);
+
+				LastTransferLength = 0;
+				while (Endpoint_Write_Stream_LE(MessagePayload, MessageHeader.TransferSize, &LastTransferLength) ==
+				       ENDPOINT_RWSTREAM_IncompleteTransfer)
+				{
+					if (IsTMCBulkINReset)
+					  break;
+				}
+
+				Endpoint_ClearIN();
+				break;
+			default:
+				Endpoint_StallTransaction();
+				break;
+		}
+
+		LEDs_SetAllLEDs(LEDMASK_USB_READY);
+	}
+
+	/* All pending data has been processed - reset the data abort flags */
+	IsTMCBulkINReset  = false;
+	IsTMCBulkOUTReset = false;
+}
+
+/** Attempts to read in the TMC message header from the TMC interface.
+ *
+ *  \param[out] MessageHeader  Pointer to a location where the read header (if any) should be stored
+ *
+ *  \return Boolean \c true if a header was read, \c false otherwise
+ */
+bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader)
+{
+	uint16_t BytesTransferred;
+	uint8_t  ErrorCode;
+
+	/* Select the Data Out endpoint */
+	Endpoint_SelectEndpoint(TMC_OUT_EPADDR);
+
+	/* Abort if no command has been sent from the host */
+	if (!(Endpoint_IsOUTReceived()))
+	  return false;
+
+	/* Read in the header of the command from the host */
+	BytesTransferred = 0;
+	while ((ErrorCode = Endpoint_Read_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==
+	       ENDPOINT_RWSTREAM_IncompleteTransfer)
+	{
+		if (IsTMCBulkOUTReset)
+		  break;
+	}
+
+	/* Store the new command tag value for later use */
+	CurrentTransferTag = MessageHeader->Tag;
+
+	/* Indicate if the command has been aborted or not */
+	return (!(IsTMCBulkOUTReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));
+}
+
+bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader)
+{
+	uint16_t BytesTransferred;
+	uint8_t  ErrorCode;
+
+	/* Set the message tag of the command header */
+	MessageHeader->Tag        =  CurrentTransferTag;
+	MessageHeader->InverseTag = ~CurrentTransferTag;
+
+	/* Select the Data In endpoint */
+	Endpoint_SelectEndpoint(TMC_IN_EPADDR);
+
+	/* Send the command header to the host */
+	BytesTransferred = 0;
+	while ((ErrorCode = Endpoint_Write_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==
+	       ENDPOINT_RWSTREAM_IncompleteTransfer)
+	{
+		if (IsTMCBulkINReset)
+		  break;
+	}
+
+	/* Indicate if the command has been aborted or not */
+	return (!(IsTMCBulkINReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));
+}
+
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
new file mode 100644
index 0000000000..50e865bedd
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h
@@ -0,0 +1,150 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2017.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#ifndef _TESTANDMEASUREMENT_H_
+#define _TESTANDMEASUREMENT_H_
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/power.h>
+		#include <avr/interrupt.h>
+
+		#include "Descriptors.h"
+
+		#include <LUFA/Drivers/Board/LEDs.h>
+		#include <LUFA/Drivers/USB/USB.h>
+		#include <LUFA/Platform/Platform.h>
+
+	/* Macros: */
+		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
+		#define LEDMASK_USB_NOTREADY                  LEDS_LED1
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
+		#define LEDMASK_USB_ENUMERATING              (LEDS_LED2 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is ready. */
+		#define LEDMASK_USB_READY                    (LEDS_LED2 | LEDS_LED4)
+
+		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
+		#define LEDMASK_USB_ERROR                    (LEDS_LED1 | LEDS_LED3)
+
+		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
+		#define LEDMASK_USB_BUSY                      LEDS_LED2
+
+		#define Req_InitiateAbortBulkOut              0x01
+		#define Req_CheckAbortBulkOutStatus           0x02
+		#define Req_InitiateAbortBulkIn               0x03
+		#define Req_CheckAbortBulkInStatus            0x04
+		#define Req_InitiateClear                     0x05
+		#define Req_CheckClearStatus                  0x06
+		#define Req_GetCapabilities                   0x07
+		#define Req_IndicatorPulse                    0x40
+
+		#define TMC_STATUS_SUCCESS                    0x01
+		#define TMC_STATUS_PENDING                    0x02
+		#define TMC_STATUS_FAILED                     0x80
+		#define TMC_STATUS_TRANSFER_NOT_IN_PROGRESS   0x81
+		#define TMC_STATUS_SPLIT_NOT_IN_PROGRESS      0x82
+		#define TMC_STATUS_SPLIT_IN_PROGRESS          0x83
+
+		#define TMC_MESSAGEID_DEV_DEP_MSG_OUT         0x01
+		#define TMC_MESSAGEID_DEV_DEP_MSG_IN          0x02
+		#define TMC_MESSAGEID_DEV_VENDOR_OUT          0x7E
+		#define TMC_MESSAGEID_DEV_VENDOR_IN           0x7F
+
+	/* Type Defines */
+		typedef struct
+		{
+			uint8_t  Status;
+			uint8_t  Reserved;
+
+			uint16_t TMCVersion;
+
+			struct
+			{
+				unsigned ListenOnly             : 1;
+				unsigned TalkOnly               : 1;
+				unsigned PulseIndicateSupported : 1;
+				unsigned Reserved               : 5;
+			} Interface;
+
+			struct
+			{
+				unsigned SupportsAbortINOnMatch : 1;
+				unsigned Reserved               : 7;
+			} Device;
+
+			uint8_t Reserved2[6];
+			uint8_t Reserved3[12];
+		} TMC_Capabilities_t;
+
+		typedef struct
+		{
+			uint8_t LastMessageTransaction;
+			uint8_t TermChar;
+			uint8_t Reserved[2];
+		} TMC_DevOUTMessageHeader_t;
+
+		typedef struct
+		{
+			uint8_t LastMessageTransaction;
+			uint8_t Reserved[3];
+		} TMC_DevINMessageHeader_t;
+
+		typedef struct
+		{
+			uint8_t  MessageID;
+			uint8_t  Tag;
+			uint8_t  InverseTag;
+			uint8_t  Reserved;
+			uint32_t TransferSize;
+
+			union
+			{
+				TMC_DevOUTMessageHeader_t DeviceOUT;
+				TMC_DevINMessageHeader_t  DeviceIN;
+				uint32_t                  VendorSpecific;
+			} MessageIDSpecific;
+		} TMC_MessageHeader_t;
+
+	/* Function Prototypes: */
+		void SetupHardware(void);
+		void TMC_Task(void);
+		bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader);
+		bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader);
+
+		void EVENT_USB_Device_Connect(void);
+		void EVENT_USB_Device_Disconnect(void);
+		void EVENT_USB_Device_ConfigurationChanged(void);
+		void EVENT_USB_Device_ControlRequest(void);
+
+#endif
+
diff --git a/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile
new file mode 100644
index 0000000000..e0d89ccd70
--- /dev/null
+++ b/lib/lufa/Demos/Device/Incomplete/TestAndMeasurement/makefile
@@ -0,0 +1,43 @@
+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2017.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = TestAndMeasurement
+SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
+LD_FLAGS     =
+
+# Default target
+all:
+
+# Include LUFA-specific DMBS extension modules
+DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA
+include $(DMBS_LUFA_PATH)/lufa-sources.mk
+include $(DMBS_LUFA_PATH)/lufa-gcc.mk
+
+# Include common DMBS build system modules
+DMBS_PATH      ?= $(LUFA_PATH)/Build/DMBS/DMBS
+include $(DMBS_PATH)/core.mk
+include $(DMBS_PATH)/cppcheck.mk
+include $(DMBS_PATH)/doxygen.mk
+include $(DMBS_PATH)/dfu.mk
+include $(DMBS_PATH)/gcc.mk
+include $(DMBS_PATH)/hid.mk
+include $(DMBS_PATH)/avrdude.mk
+include $(DMBS_PATH)/atprogram.mk