Fix the LUFA lib to use a submodule instead of just files (#6245)

* Remove LUFA files

* Update descriptions for newer version of LUFA

* Create PR6245.md

* Fix CDC(Serial) type errors

* Fix missed merge conflict for AUDIO_DTYPE_CSInterface

1 files changed, 0 insertions, 93 deletions

diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
deleted file mode 100644
index 246775c221..0000000000
--- a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/VirtualSerialMassStorage.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
-
-/** \mainpage Communications Device Class (Virtual Serial Port) and Mass Storage Demo
- *
- *  \section Sec_Compat Demo Compatibility:
- *
- *  The following list indicates what microcontrollers are compatible with this demo.
- *
- *  \li Series 7 USB AVRs (AT90USBxxx7)
- *  \li Series 6 USB AVRs (AT90USBxxx6)
- *  \li Series 4 USB AVRs (ATMEGAxxU4)
- *  \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
- *  \li Series B XMEGA AVRs (ATXMEGAxxxBx)
- *  \li Series C XMEGA AVRs (ATXMEGAxxxCx)
- *
- *  \section Sec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Communications Device Class (CDC) \n
- *        Mass Storage Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Subclass:</b></td>
- *    <td>Abstract Control Model (ACM) \n
- *        Bulk-Only Transport</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF CDC Class Standard \n
- *        USBIF Mass Storage Standard \n
- *        USB Bulk-Only Transport Standard \n
- *        SCSI Primary Commands Specification \n
- *        SCSI Block Commands Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Supported USB Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section Sec_Description Project Description:
- *
- *  Combined Communications Device Class/Mass Storage demonstration application.
- *  This gives a simple reference application for implementing a combined
- *  CDC and Mass Storage device acting as a both a virtual serial port and a flash
- *  drive. Joystick actions are transmitted to the host as strings, and data can be
- *  written to or read from the exposed flash drive interface in the same manner as
- *  other USB flash drives. The device does not respond to serial data sent from the
- *  host.
- *
- *  After running this demo for the first time on a new computer,
- *  you will need to supply the .INF file located in this demo
- *  project's directory as the device's driver when running under
- *  Windows. This will enable Windows to use its inbuilt CDC drivers,
- *  negating the need for custom drivers for the device. Other
- *  Operating Systems should automatically use their own inbuilt
- *  CDC-ACM drivers.
- *
- *  \section Sec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <th><b>Define Name:</b></th>
- *    <th><b>Location:</b></th>
- *    <th><b>Description:</b></th>
- *   </tr>
- *   <tr>
- *    <td>TOTAL_LUNS</td>
- *    <td>AppConfig.h</td>
- *    <td>Total number of Logical Units (drives) in the device. The total device capacity is shared equally between each drive -
- *        this can be set to any positive non-zero amount.</td>
- *   </tr>
- *   <tr>
- *    <td>DISK_READ_ONLY</td>
- *    <td>AppConfig.h</td>
- *    <td>Configuration define, indicating if the disk should be write protected or not.</td>
- *   </tr>
- */
-