Remove layouts

4 files changed, 0 insertions, 204 deletions

diff --git a/layouts/community/ortho_4x12/wanleg/config.h b/layouts/community/ortho_4x12/wanleg/config.h
deleted file mode 100644
index f7650ddd3a..0000000000
--- a/layouts/community/ortho_4x12/wanleg/config.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#pragma once
-
-#if defined(KEYBOARD_jj40)
-#undef BACKLIGHT_BREATHING
-#undef BACKLIGHT_LEVELS
-#undef BREATHING_PERIOD
-#define BACKLIGHT_BREATHING
-#define BACKLIGHT_LEVELS 3
-#define BREATHING_PERIOD 15
-#endif
-
-//QMK DFU settings (ProMicro boards with QMK bootloader)
-// set top left key as bootloader mode escape key on Lets Split rev2
-#if defined(KEYBOARD_lets_split_rev2)
-#define QMK_LED B0
-#define QMK_ESC_OUTPUT F6 // usually COL
-#define QMK_ESC_INPUT D7 // usually ROW
-#define USE_SERIAL
-#undef USE_I2C
-#define EE_HANDS
-#endif
-
-// set top left key as bootloader mode escape key on 4x4 48key layout
-#if defined(KEYBOARD_40percentclub_4x4) && !defined(PRO_MICRO)
-#define QMK_LED B0
-#define QMK_ESC_OUTPUT C6 // usually COL
-#define QMK_ESC_INPUT B2 // usually ROW
-#endif
-
-// use alternate settings for 4x4 board using ProMicro instead of Micro
-// usage: make 4x4:wanleg PM=yes
-#if defined(KEYBOARD_40percentclub_4x4) && defined(PRO_MICRO) 
-#define QMK_ESC_OUTPUT F4 // usually COL
-#define QMK_ESC_INPUT D1 // usually ROW
-#define QMK_LED B0
-
-//need to undefine standard 4x4 array before defining alternate ProMicro array
-#undef MATRIX_ROW_PINS
-#undef MATRIX_COL_PINS
-#define MATRIX_ROW_PINS { D1, D0, D4, C6 }
-//last 4 elements of the column array are not broken out on a ProMicro (included only to preserve array structure)
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, B5, B4, E6, D7, F0, B7, D6, F1 }
-#endif
diff --git a/layouts/community/ortho_4x12/wanleg/keymap.c b/layouts/community/ortho_4x12/wanleg/keymap.c
deleted file mode 100644
index 23e794dc41..0000000000
--- a/layouts/community/ortho_4x12/wanleg/keymap.c
+++ /dev/null
@@ -1,97 +0,0 @@
-#include QMK_KEYBOARD_H
-#include "wanleg.h"
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-#if defined(KEYBOARD_lets_split_rev2)
-[_GK] = LAYOUT_ortho_4x12_wrapper(
-  _______________GherkinLike_0_______________,
-  _______________GherkinLike_1_______________,
-  _______________GherkinLike_2_______________,
-  _______________GherkinLike_3_OneHand_______
-),
-[ONE] = LAYOUT_ortho_4x12_wrapper(
-  _______________Qwerty_Row__0_______________,
-  _______________Qwerty_Row__1_______________,
-  _______________Qwerty_Row__2_______________,
-  KC_LCTL, KC_LGUI, KC_LALT, GHERKIN, SUBTER, SH_T(KC_SPC), SH_T(KC_SPC), SUPRA, KC_RGUI, KC_RALT, GHERKIN, KC_RCTL
-),
-[DIR] = LAYOUT_ortho_4x12_wrapper(
-  _____________DIRECTIONS_Row__0_____________,
-  _____________DIRECTIONS_Row__1_____________,
-  _____________DIRECTIONS_Row__2_____________,
-  _______, _______, ONEHAND, _______, _______, _______, _______, _______, _______, _______, _______, _______
-),
-#elif defined(KEYBOARD_40percentclub_4x4)
-[_GK] = LAYOUT_ortho_4x12_wrapper(
-  _______________GherkinLike_0_______________,
-  _______________GherkinLike_1_______________,
-  _______________GherkinLike_2_______________,
-  TD(RST_TAP_DANCE), KC_LGUI, KC_LALT, NUMPAD, NUMBER, ETCETERA, KC_SPC,DIRECTION, KC_RGUI, KC_RALT, KC_DEL, KC_RCTL
-),
-
-[PAD] = LAYOUT_ortho_4x4_wrapper(
-  _______________NUMPAD_Row__0_______________, 
-  _______________NUMPAD_Row__1_______________, 
-  _______________NUMPAD_Row__2_______________, 
-  _______________NUMPAD_Row__3_______________
-),
-
-#elif defined(KEYBOARD_jj40)
-[_GK] = LAYOUT_ortho_4x12_wrapper(
-  _______________GherkinLike_0_______________,
-  _______________GherkinLike_1_______________,
-  _______________GherkinLike_2_______________,
-  TD(RST_TAP_DANCE), BL_TOGG, BL_STEP, BL_BRTG, NUMBER, ETCETERA, KC_SPC,DIRECTION, KC_RGUI, KC_RALT, KC_DEL, KC_RCTL
-),
-
-#else
-[_GK] = LAYOUT_ortho_4x12_wrapper(
-  _______________GherkinLike_0_______________,
-  _______________GherkinLike_1_______________,
-  _______________GherkinLike_2_______________,
-  _______________GherkinLike_3_______________
-),
-#endif
-[_QW] = LAYOUT_ortho_4x12_wrapper(
-  _______________Qwerty_Row__0_______________,
-  _______________Qwerty_Row__1_______________,
-  _______________Qwerty_Row__2_______________,
-  _______________Qwerty_Row__3_______________
-),
-
-[SUP] = LAYOUT_ortho_4x12_wrapper(
-  ________________SUPRA_Row_0________________,
-  ________________SUPRA_Row_1________________,
-  ________________SUPRA_Row_2________________,
-  ________________SUPRA_Row_3________________
-),
-
-[SUB] = LAYOUT_ortho_4x12_wrapper(
-  _______________SUBTER_Row__0_______________,
-  _______________SUBTER_Row__1_______________,
-  _______________SUBTER_Row__2_______________,
-  _______________SUBTER_Row__3_______________
-),
-
-[NUM] = LAYOUT_ortho_4x12_wrapper(
-  _______________NUMBERS_Row_0_______________,
-  _______________NUMBERS_Row_1_______________,
-  _______________NUMBERS_Row_2_______________,
-  _______________NUMBERS_Row_3_______________
-),
-
-[DIR] = LAYOUT_ortho_4x12_wrapper(
-  _____________DIRECTIONS_Row__0_____________,
-  _____________DIRECTIONS_Row__1_____________,
-  _____________DIRECTIONS_Row__2_____________,
-  _____________DIRECTIONS_Row__3_____________
-),
-
-[ETC] = LAYOUT_ortho_4x12_wrapper(
-  ______________ETCETERA_Row__0______________,
-  ______________ETCETERA_Row__1______________,
-  ______________ETCETERA_Row__2______________,
-  ______________ETCETERA_Row__3______________
-),
-
-};
diff --git a/layouts/community/ortho_4x12/wanleg/readme.md b/layouts/community/ortho_4x12/wanleg/readme.md
deleted file mode 100644
index 1cd41d116d..0000000000
--- a/layouts/community/ortho_4x12/wanleg/readme.md
+++ /dev/null
@@ -1,54 +0,0 @@
-# Let's Split Flashing  
-(More information at `qmk_firmware/layouts/community/ortho_3x10/wanleg/readme.md`)
-## Make the QMK DFU .hex
-`make lets_split/rev2:wanleg:production dfu=qmk` 
-
-## Burning EEPROM settings and Firmware
-Navigate to the directory with your .hex file and the `eeprom-lefthand.eep` and `eeprom-righthand.eep` files in it.  
-**Burn Left Side With QMK DFU and Firmware**  
-`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-lefthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`  
-
-**Burn Right Side With QMK DFU and Firmware**  
-`avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-righthand.eep -P comPORT -U flash:w:YOUR_production.hex:a`  
-
-Change `comPORT` to whatever port is used by the Arduino (e.g. `com11` in Windows or `/dev/ttyACM0` in Linux). Use Device Manager in Windows to find the port being used. Use `ls /dev/tty*` in Linux. Change `YOUR_production.hex` to whatever you've created in the previous step.
-
-## Using QMK DFU  
-Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
-`make lets_split/rev2:<keymap>:dfu dfu=qmk`  
-The `dfu=qmk` conditional will set `BOOTLOADER = qmk-dfu` instead of `BOOTLOADER = caterina`  
-
-# Let's Split LEDs  
-In `qmk_firmware/keyboards/lets_split/rev2/rev2.c`, replace contents with 
-```  
-#include "lets_split.h"
-
-
-#ifdef SSD1306OLED
-void led_set_kb(uint8_t usb_led) {
-    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-    led_set_user(usb_led);
-}
-#endif
-
-void matrix_init_kb(void) {
-
-    // // green led on
-    // DDRD |= (1<<5);
-    // PORTD &= ~(1<<5);
-
-    // // orange led on
-    // DDRB |= (1<<0);
-    // PORTB &= ~(1<<0);
-	
-	//turn off LEDs on ProMicro
-   DDRD &= ~(1<<5);
-   PORTD &= ~(1<<5);
-
-   DDRB &= ~(1<<0);
-   PORTB &= ~(1<<0);
-
-	matrix_init_user();
-};
-```  
-to turn off LEDs
diff --git a/layouts/community/ortho_4x12/wanleg/rules.mk b/layouts/community/ortho_4x12/wanleg/rules.mk
deleted file mode 100644
index e8277610b6..0000000000
--- a/layouts/community/ortho_4x12/wanleg/rules.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-AUDIO_ENABLE = no
-SWAP_HANDS_ENABLE = no
-
-ifeq ($(strip $(KEYBOARD)), lets_split/rev2)
-	SWAP_HANDS_ENABLE = yes
-endif
-
-ifeq ($(strip $(KEYBOARD)), planck/rev6)
-	AUDIO_ENABLE = yes
-endif
\ No newline at end of file