[Keymap] All about (ARM) RGB and OLEDs (drashna keymaps) (#7354)

* Add Kyria Keymap

* Enable all RGBLIGHT Animations for ARM and high capacity AVR

* Reduce GNUC version for __has_include

* Cleanup Ortho 4x12 Community layout

* Update Collide 39 keymap

* Cleanup Keymaps

* Enable full 30 LEDs for Ergodox

* Change EEPROM Load timing

* Use RGB Matrix on Planck Rev6

* Use correct keymap swap

* Enable everything for ARM

* Only enable rgb sleep on avr until crash is fixed

* Add additional Kyria keymap config

* Overhaul Kyria OLED display

* Improve kyria keymap based on usage

* Minor tweaks to rules

* Update OLED code to truncate properly

* Fix RGB Light layer indication

* Switch all of biton32 to get_highest_layer function

* Fix OLED Keylogger display

* Run qmk cformat over all of my user files

* Slight tweak to kyria based on usage

* Move around LALT_T config

* Add comments about base wrappers to keymaps

* Another cformat pass

* Temp fix for VUSB boards and NKRO

* Convert tabs to spaces in rules.mk files

* Only enable RGBLight if it's enabled

* Add Encoder Flip setting

* Update OLED font file

16 files changed, 654 insertions, 191 deletions

diff --git a/keyboards/40percentclub/nano/keymaps/drashna/keymap.c b/keyboards/40percentclub/nano/keymaps/drashna/keymap.c
index 6c5b974572..668178967b 100644
--- a/keyboards/40percentclub/nano/keymaps/drashna/keymap.c
+++ b/keyboards/40percentclub/nano/keymaps/drashna/keymap.c
@@ -1,12 +1,11 @@
-#include QMK_KEYBOARD_H
 #include "drashna.h"
 #include "analog.c"
 #include "pointing_device.h"
 #include "pincontrol.h"
 
-
 #define KC_X0 LT(_FN, KC_ESC)
 
+// clang-format off
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   [_QWERTY] = LAYOUT(
      KC_VOLU, KC_MPLY, KC_MPRV, RESET,
@@ -14,6 +13,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
   ),
 
 };
+// clang-format on
 
 // Joystick
 // Set Pins
@@ -39,7 +39,7 @@ int16_t xOrigin, yOrigin;
 uint16_t lastCursor = 0;
 
 int16_t axisCoordinate(uint8_t pin, uint16_t origin) {
-    int8_t direction;
+    int8_t  direction;
     int16_t distanceFromOrigin;
     int16_t range;
 
@@ -57,8 +57,8 @@ int16_t axisCoordinate(uint8_t pin, uint16_t origin) {
         direction          = 1;
     }
 
-    float percent    = (float)distanceFromOrigin / range;
-    int16_t   coordinate = (int16_t)(percent * 100);
+    float   percent    = (float)distanceFromOrigin / range;
+    int16_t coordinate = (int16_t)(percent * 100);
     if (coordinate < 0) {
         return 0;
     } else if (coordinate > 100) {
diff --git a/keyboards/c39/keymaps/drashna/config.h b/keyboards/c39/keymaps/drashna/config.h
index 361f68a78e..5d53fe54bb 100755..100644
--- a/keyboards/c39/keymaps/drashna/config.h
+++ b/keyboards/c39/keymaps/drashna/config.h
@@ -2,6 +2,11 @@
 
 // place overrides here
 #undef MATRIX_COL_PINS
-#define MATRIX_COL_PINS { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 }
+#define MATRIX_COL_PINS \
+    { A3, A2, A1, A0, B13, B14, B15, B9, B3, B2, B4, A10, A9 }
 #undef MATRIX_ROW_PINS
-#define MATRIX_ROW_PINS { B7, B1, B0 }
+#define MATRIX_ROW_PINS \
+    { B7, B1, B0 }
+
+#define RGB_DI_PIN B10
+#define RGBLED_NUM 15
diff --git a/keyboards/c39/keymaps/drashna/keymap.c b/keyboards/c39/keymaps/drashna/keymap.c
index 9de75190d0..882938138f 100755
--- a/keyboards/c39/keymaps/drashna/keymap.c
+++ b/keyboards/c39/keymaps/drashna/keymap.c
@@ -1,45 +1,97 @@
-#include QMK_KEYBOARD_H
+#include "drashna.h"
 
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-#define _QWERTY 0
-#define _FN1 1
-
-// Defines for task manager and such
-#define CALTDEL LCTL(LALT(KC_DEL))
-#define TSKMGR LCTL(LSFT(KC_ESC))
+/*
+ * The `LAYOUT_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them.  This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
+// clang-format off
+#define LAYOUT_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_wrapper( \
+    KC_ESC,  K01,    K02,     K03,      K04,     K05,     KC_NO,   K06,     K07,     K08,     K09,     K0A,     KC_DEL, \
+    ALT_T(KC_TAB), K11, K12,  K13,      K14,     K15,     KC_BSPC, K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
+    KC_MLSF, CTL_T(K21), K22, K23,   K24, LT(_LOWER,K25), KC_SPC, LT(_RAISE,K26), K27, K28,   K29, RCTL_T(K2A), KC_ENT \
+  )
+#define LAYOUT_base_wrapper(...)       LAYOUT_base(__VA_ARGS__)
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
-/* Qwerty
- * ,----------------------------------------------------------------------------.  ,-------------.
- * |   Q  |   W  |   E  |   R  |   T  | Bksp |   Y  |   U  |   I  |   O  |   P  |  |  M1  |  M2  |
- * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
- * |   A  |   S  |   D  |   F  |   G  | Enter|   H  |   J  |   K  |   L  |   ;  |  |  M3  |  M4  |
- * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
- * |   Z  |   X  |   C  |   V  |   B  |  FN1 |   N  |   M  |   ,  |   .  |   /  |  |  M5  |  M6  |
- * `----------------------------------------------------------------------------'  `-------------'
- */
-[_QWERTY] = LAYOUT(
-    KC_Q, KC_W, KC_E, KC_R, KC_T, KC_BSPC,                KC_Y, KC_U, KC_I,    KC_O,   KC_P,      KC_1, KC_2,
-    KC_A, KC_S, KC_D, KC_F, KC_G, MT(MOD_LSFT, KC_ENT),   KC_H, KC_J, KC_K,    KC_L,   KC_SCLN,   KC_3, KC_4,
-    KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_FN1, KC_SPC),       KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,   KC_5, KC_6
-),
-
-/* FN1
- * ,----------------------------------------------------------------------------.  ,-------------.
- * |   1  |   2  |   3  |   4  |   5  | Bksp |   6  |   7  |   8  |   9  |   0  |  |  M1  |  M2  |
- * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
- * |   4  |   5  |   6  |   +  |      | Enter|      |      |      |      |      |  |  M3  |  M4  |
- * |------+------+------+------+------+------+------+------+------+------+------+  |------+------|
- * |   7  |   8  |   9  |   0  |      |  FN1 |      |      |      |      |      |  |  M5  |  M6  |
- * `----------------------------------------------------------------------------'  `-------------'
- */
-[_FN1] = LAYOUT(
-    KC_1, KC_2, KC_3, KC_4,    KC_5,    KC_BSPC, KC_6,    KC_7,    KC_8,    KC_9,    KC_0,      KC_1, KC_2,
-    KC_4, KC_5, KC_6, KC_PLUS, _______, KC_ENT,  _______, _______, _______, _______, _______,   KC_3, KC_4,
-    KC_7, KC_8, KC_9, KC_0,    _______, _______, _______, _______, _______, _______, _______,   KC_5, KC_6
-),
+  [_QWERTY] = LAYOUT_base_wrapper(
+    _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+    _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+    _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+  ),
+
+  [_COLEMAK] = LAYOUT_base_wrapper(
+    _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+    _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+    _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+  ),
+
+  [_DVORAK] = LAYOUT_base_wrapper(
+    _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+    _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+    _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+  ),
+
+  [_WORKMAN] = LAYOUT_base_wrapper(
+    _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+    _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+    _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+  ),
+
+  [_NORMAN] = LAYOUT_base_wrapper(
+    _________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
+    _________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
+    _________________NORMAN_L3_________________, _________________NORMAN_R3_________________
+  ),
+
+  [_MALTRON] = LAYOUT_base_wrapper(
+    _________________MALTRON_L1________________, _________________MALTRON_R1________________,
+    _________________MALTRON_L2________________, _________________MALTRON_R2________________,
+    _________________MALTRON_L3________________, _________________MALTRON_R3________________
+  ),
+
+  [_EUCALYN] = LAYOUT_base_wrapper(
+    _________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
+    _________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
+    _________________EUCALYN_L3________________, _________________EUCALYN_R3________________
+  ),
+
+  [_CARPLAX] = LAYOUT_base_wrapper(
+    _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
+    _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
+    _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
+  ),
+
+  [_MODS] = LAYOUT_wrapper(
+    _______, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______,
+    _______, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______,
+    KC_LSFT, ___________________BLANK___________________, _______, ___________________BLANK___________________, _______
+  ),
+
+  [_LOWER] = LAYOUT_wrapper(
+    KC_TILD, _________________LOWER_L1__________________, _______, _________________LOWER_R1__________________, KC_BSPC,
+    KC_DEL,  _________________LOWER_L2__________________, _______, _________________LOWER_R2__________________, KC_PIPE,
+    _______, _________________LOWER_L3__________________, _______, _________________LOWER_R3__________________, _______
+  ),
+
+  [_RAISE] = LAYOUT_wrapper(
+    KC_GRV,  _________________RAISE_L1__________________, _______, _________________RAISE_R1__________________, KC_BSPC,
+    KC_DEL,  _________________RAISE_L2__________________, _______, _________________RAISE_R2__________________, KC_BSLS,
+    _______, _________________RAISE_L3__________________, _______, _________________RAISE_R3__________________, _______
+  ),
+
+  [_ADJUST] = LAYOUT_wrapper(
+    KC_MAKE, _________________ADJUST_L1_________________, KC_NUKE, _________________ADJUST_R1_________________, KC_RST,
+    VRSN,    _________________ADJUST_L2_________________, MG_NKRO, _________________ADJUST_R2_________________, EEP_RST,
+    TG_MODS, _________________ADJUST_L3_________________, KC_RGB_T,_________________ADJUST_R3_________________, RGB_IDL
+  )
 };
+// clang-format on
diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk
index ae0cc9efee..d216f6abe6 100644
--- a/keyboards/c39/keymaps/drashna/rules.mk
+++ b/keyboards/c39/keymaps/drashna/rules.mk
@@ -15,4 +15,6 @@ MIDI_ENABLE = no            # MIDI controls
 UNICODE_ENABLE = yes         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = yes           # Audio output on port C6
-RGBLIGHT_ENABLE = no        # RGB Enable / Disable
+RGBLIGHT_ENABLE = yes       # RGB Enable / Disable
+
+RGBLIGHT_STARTUP_ANIMATION = yes
diff --git a/keyboards/crkbd/keymaps/drashna/glcdfont.c b/keyboards/crkbd/keymaps/drashna/glcdfont.c
index 998b5c408a..2bfc3fac6d 100644
--- a/keyboards/crkbd/keymaps/drashna/glcdfont.c
+++ b/keyboards/crkbd/keymaps/drashna/glcdfont.c
@@ -1,17 +1,18 @@
 #pragma once
 
 #ifdef __AVR__
- #include <avr/io.h>
- #include <avr/pgmspace.h>
+#    include <avr/io.h>
+#    include <avr/pgmspace.h>
 #elif defined(ESP8266)
- #include <pgmspace.h>
+#    include <pgmspace.h>
 #else
- #define PROGMEM
+#    define PROGMEM
 #endif
 
 // Corne 8x6 font with QMK Firmware Logo
 // Online editor: https://helixfonteditor.netlify.com/
 
+// clang-format off
 const unsigned char font[] PROGMEM = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
diff --git a/keyboards/crkbd/keymaps/drashna/keymap.c b/keyboards/crkbd/keymaps/drashna/keymap.c
index cd84f0d919..9a1beeb74b 100644
--- a/keyboards/crkbd/keymaps/drashna/keymap.c
+++ b/keyboards/crkbd/keymaps/drashna/keymap.c
@@ -1,17 +1,17 @@
-#include QMK_KEYBOARD_H
 #include "drashna.h"
 
-extern keymap_config_t keymap_config;
-extern uint8_t         is_master;
+extern uint8_t is_master;
 
 #ifdef RGBLIGHT_ENABLE
 // Following line allows macro to read current RGB settings
 extern rgblight_config_t rgblight_config;
 #endif
 #ifdef OLED_DRIVER_ENABLE
-static uint32_t        oled_timer = 0;
-static char     keylog_str[6]   = {};
-static uint16_t log_timer       = 0;
+#    define KEYLOGGER_LENGTH 5
+static uint32_t oled_timer                       = 0;
+static char     keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"};
+static uint16_t log_timer                        = 0;
+// clang-format off
 static const char PROGMEM code_to_name[0xFF] = {
 //   0    1    2    3    4    5    6    7    8    9    A    B    c    D    E    F
     ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l',  // 0x
@@ -37,7 +37,14 @@ void add_keylog(uint16_t keycode);
 
 enum crkbd_keycodes { RGBRST = NEW_SAFE_RANGE };
 
-// clang-format off
+/*
+ * The `LAYOUT_crkbd_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them.  This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
+
 #define LAYOUT_crkbd_base( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
     K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
@@ -155,7 +162,7 @@ void add_keylog(uint16_t keycode) {
         keycode = 0;
     }
 
-    for (uint8_t i = 4; i > 0; --i) {
+    for (uint8_t i = (KEYLOGGER_LENGTH - 1); i > 0; --i) {
         keylog_str[i] = keylog_str[i - 1];
     }
 
@@ -168,7 +175,7 @@ void add_keylog(uint16_t keycode) {
 
 void update_log(void) {
     if (timer_elapsed(log_timer) > 750) {
-        //add_keylog(0);
+        // add_keylog(0);
     }
 }
 
@@ -179,7 +186,7 @@ void render_keylogger_status(void) {
 
 void render_default_layer_state(void) {
     oled_write_P(PSTR("Lyout"), false);
-    switch (biton32(default_layer_state)) {
+    switch (get_highest_layer(default_layer_state)) {
         case _QWERTY:
             oled_write_P(PSTR(" QRTY"), false);
             break;
@@ -268,7 +275,7 @@ void render_status_secondary(void) {
     /* Show Keyboard Layout  */
     render_default_layer_state();
     render_layer_state();
-    render_mod_status(get_mods()|get_oneshot_mods());
+    render_mod_status(get_mods() | get_oneshot_mods());
 
     render_keylogger_status();
 }
@@ -278,9 +285,11 @@ void oled_task_user(void) {
         oled_off();
         return;
     }
-#ifndef SPLIT_KEYBOARD
-    else { oled_on(); }
-#endif
+#    ifndef SPLIT_KEYBOARD
+    else {
+        oled_on();
+    }
+#    endif
 
     update_log();
     if (is_master) {
@@ -303,16 +312,12 @@ uint16_t get_tapping_term(uint16_t keycode) {
 
 #ifdef RGB_MATRIX_ENABLE
 
-void suspend_power_down_keymap(void) {
-    rgb_matrix_set_suspend_state(true);
-}
+void suspend_power_down_keymap(void) { rgb_matrix_set_suspend_state(true); }
 
-void suspend_wakeup_init_keymap(void) {
-    rgb_matrix_set_suspend_state(false);
-}
+void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); }
 
 void check_default_layer(uint8_t mode, uint8_t type) {
-    switch (biton32(default_layer_state)) {
+    switch (get_highest_layer(default_layer_state)) {
         case _QWERTY:
             rgb_matrix_layer_helper(HSV_CYAN, mode, rgb_matrix_config.speed, type);
             break;
@@ -351,7 +356,7 @@ void rgb_matrix_indicators_user(void) {
         rgb_matrix_config.enable
 #    endif
     ) {
-        switch (biton32(layer_state)) {
+        switch (get_highest_layer(layer_state)) {
             case _GAMEPAD:
                 rgb_matrix_layer_helper(HSV_ORANGE, 0, rgb_matrix_config.speed, LED_FLAG_UNDERGLOW);
                 break;
diff --git a/keyboards/gergo/keymaps/drashna/keymap.c b/keyboards/gergo/keymaps/drashna/keymap.c
index edc5a9e997..d1e6224060 100644
--- a/keyboards/gergo/keymaps/drashna/keymap.c
+++ b/keyboards/gergo/keymaps/drashna/keymap.c
@@ -1,14 +1,12 @@
-/* Good on you for modifying your layout! if you don't have
- * time to read the QMK docs, a list of keycodes can be found at
- *
- * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
- *
- * There's also a template for adding new layers at the bottom of this file!
- */
-
-#include QMK_KEYBOARD_H
 #include "drashna.h"
 
+/*
+ * The `LAYOUT_gergo_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them.  This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
 // clang-format off
 #define LAYOUT_gergo_base( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
@@ -17,7 +15,7 @@
   ) \
   LAYOUT_gergo_wrapper( \
     KC_ESC,  K01,    K02,     K03,      K04,     K05,                                                K06,     K07,     K08,     K09,     K0A,    KC_PIPE,      \
-    KC_TAB,  K11,    K12,     K13,      K14,     K15,     _______,                         _______,  K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
+    LALT_T(KC_TAB), K11, K12, K13,      K14,     K15,     _______,                         _______,  K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
     OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,     _______, _______,       _______, _______,  K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT,      \
                                        KC_GRV,   KC_SPC,  BK_LWER, OS_LALT,       OS_RGUI, DL_RAIS, KC_ENT, _______                            \
     )
diff --git a/keyboards/keebio/iris/keymaps/drashna/config.h b/keyboards/keebio/iris/keymaps/drashna/config.h
index 6fff5d72c6..25678bd67d 100644
--- a/keyboards/keebio/iris/keymaps/drashna/config.h
+++ b/keyboards/keebio/iris/keymaps/drashna/config.h
@@ -32,7 +32,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    undef RGBLED_NUM
 #    define RGBLED_NUM 18  // Number of LEDs
 #    undef RGBLED_SPLIT
-#    define RGBLED_SPLIT { 9, 9 }
+#    define RGBLED_SPLIT \
+        { 9, 9 }
 #    define RGBLIGHT_HUE_STEP 8
 #    define RGBLIGHT_SAT_STEP 8
 #    define RGBLIGHT_VAL_STEP 8
diff --git a/keyboards/keebio/iris/keymaps/drashna/keymap.c b/keyboards/keebio/iris/keymaps/drashna/keymap.c
index de19f7ca08..edfcd23e79 100644
--- a/keyboards/keebio/iris/keymaps/drashna/keymap.c
+++ b/keyboards/keebio/iris/keymaps/drashna/keymap.c
@@ -1,7 +1,13 @@
-
-#include QMK_KEYBOARD_H
 #include "drashna.h"
 
+/*
+ * The `LAYOUT_iris_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them.  This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
+
 // clang-format off
 #define LAYOUT_iris_base( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
@@ -10,8 +16,8 @@
   ) \
   LAYOUT_wrapper( \
      KC_ESC,  ________________NUMBER_LEFT________________,                       ________________NUMBER_RIGHT_______________, KC_MINS, \
-     KC_TAB , K01,    K02,     K03,      K04,     K05,                           K06,     K07,     K08,     K09,     K0A,     KC_BSLS, \
-     KC_C1R3, ALT_T(K11), K12, K13,      K14,     K15,                           K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
+     LALT_T(KC_TAB), K01, K02, K03,      K04,     K05,                           K06,     K07,     K08,     K09,     K0A,     KC_BSLS, \
+     KC_C1R3, K11,    K12,     K13,      K14,     K15,                           K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
      OS_LSFT, CTL_T(K21), K22, K23,      K24,     K25,     OS_LALT,     OS_RGUI, K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT, \
                              KC_GRV, KC_SPC,  LT(_LOWER,KC_BSPC),         LT(_RAISE,KC_DEL),  KC_ENT,  RAISE                           \
   )
diff --git a/keyboards/keebio/viterbi/keymaps/drashna/config.h b/keyboards/keebio/viterbi/keymaps/drashna/config.h
index 201c02e419..40a5bbd0e8 100644
--- a/keyboards/keebio/viterbi/keymaps/drashna/config.h
+++ b/keyboards/keebio/viterbi/keymaps/drashna/config.h
@@ -21,27 +21,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 5
 
 #ifdef RGBLIGHT_ENABLE
-#   undef RGBLED_NUM
-#   define RGBLED_NUM 16
-
-#   define RGBLIGHT_HUE_STEP 8
-#   define RGBLIGHT_SAT_STEP 8
-#   define RGBLIGHT_VAL_STEP 8
-#   define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
-#   define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
-#endif // RGBLIGHT_ENABLE
-
-
+#    undef RGBLED_NUM
+#    define RGBLED_NUM 16
 
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#    define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+#    define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
+#endif  // RGBLIGHT_ENABLE
 
 #undef PRODUCT
-#define PRODUCT   Drashnas Viterbi Macro Pad
+#define PRODUCT Drashnas Viterbi Macro Pad
 
 #ifdef AUDIO_ENABLE
-#   define C6_AUDIO
-#   define NO_MUSIC_MODE
+#    define C6_AUDIO
+#    define NO_MUSIC_MODE
 #endif
 
+// clang-format off
 #define LAYOUT_ortho_5x7( \
     L00, L01, L02, L03, L04, L05, L06, \
     L10, L11, L12, L13, L14, L15, L16, \
@@ -56,8 +54,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 		{ L30, L31, L32, L33, L34, L35, L36 }, \
 		{ L40, L41, L42, L43, L44, L45, L46 }, \
   }
+// clang-format on
 
-#define QMK_ESC_OUTPUT F5 // usually COL
-#define QMK_ESC_INPUT D4 // usually ROW
+#define QMK_ESC_OUTPUT F5  // usually COL
+#define QMK_ESC_INPUT D4   // usually ROW
 #define QMK_LED B0
 #define QMK_SPEAKER C6
diff --git a/keyboards/keebio/viterbi/keymaps/drashna/keymap.c b/keyboards/keebio/viterbi/keymaps/drashna/keymap.c
index 9c17c5a577..3b213418d6 100644
--- a/keyboards/keebio/viterbi/keymaps/drashna/keymap.c
+++ b/keyboards/keebio/viterbi/keymaps/drashna/keymap.c
@@ -1,24 +1,15 @@
-#include QMK_KEYBOARD_H
 #include "drashna.h"
 
-extern keymap_config_t keymap_config;
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-
 // Fillers to make layering more clear
-#define DIABLO   TG(_DIABLO)
-#define GAMEPAD  TG(_GAMEPAD)
-#define MEDIA    TT(_MEDIA)
+#define DIABLO TG(_DIABLO)
+#define GAMEPAD TG(_GAMEPAD)
+#define MEDIA TT(_MEDIA)
 
-
-//enum more_custom_keycodes {
+// enum more_custom_keycodes {
 //  KC_P00 = NEW_SAFE_RANGE
 //};
 
+// clang-format off
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
   [_NUMLOCK] = LAYOUT_ortho_5x7(
@@ -55,32 +46,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 
 };
-
-
+// clang-format on
 
 bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
-
-  //switch (keycode) {
-  //case KC_P00:
-  //  if (!record->event.pressed) {
-  //    tap(KC_KP_0);
-  //    tap(KC_KP_0);
-  //  }
-  //  return false;
-  //  break;
-  //}
-  return true;
+    // switch (keycode) {
+    // case KC_P00:
+    //  if (!record->event.pressed) {
+    //    tap(KC_KP_0);
+    //    tap(KC_KP_0);
+    //  }
+    //  return false;
+    //  break;
+    //}
+    return true;
 }
 
-
-
-
 void matrix_init_keymap(void) {
-  #ifndef CONVERT_TO_PROTON_C
+#ifndef CONVERT_TO_PROTON_C
     setPinOutput(D5);
     writePinHigh(D5);
 
     setPinOutput(B0);
     writePinHigh(B0);
-  #endif
+#endif
 }
diff --git a/keyboards/kyria/keymaps/drashna/config.h b/keyboards/kyria/keymaps/drashna/config.h
new file mode 100644
index 0000000000..83d6283f56
--- /dev/null
+++ b/keyboards/kyria/keymaps/drashna/config.h
@@ -0,0 +1,38 @@
+/* Copyright 2019 Thomas Baart <thomas@splitkb.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#define EE_HANDS
+
+#ifdef OLED_DRIVER_ENABLE
+#    define OLED_DISPLAY_128X64
+#    define OLED_FONT_H "font_gmk_bad.h"
+#    define OLED_DISABLE_TIMEOUT
+#    define OLED_SCROLL_TIMEOUT_RIGHT 60000
+#endif
+
+#ifdef RGBLIGHT_ENABLE
+#    define RGBLIGHT_SLEEP
+#    define RGBLIGHT_LIMIT_VAL 200
+#    define RGBLIGHT_HUE_STEP 8
+#    define RGBLIGHT_SAT_STEP 8
+#    define RGBLIGHT_VAL_STEP 8
+#endif
+
+// If you are using an Elite C rev3 on the slave side, uncomment the lines below:
+#define SPLIT_USB_DETECT
+#define SPLIT_USB_TIMEOUT 1000
diff --git a/keyboards/kyria/keymaps/drashna/keymap.c b/keyboards/kyria/keymaps/drashna/keymap.c
new file mode 100644
index 0000000000..bdb00e5967
--- /dev/null
+++ b/keyboards/kyria/keymaps/drashna/keymap.c
@@ -0,0 +1,372 @@
+#include "drashna.h"
+
+uint8_t is_master;
+
+#ifdef OLED_DRIVER_ENABLE
+#    define KEYLOGGER_LENGTH 10
+static uint32_t oled_timer                       = 0;
+static char     keylog_str[KEYLOGGER_LENGTH + 1] = {"\n"};
+static uint16_t log_timer                        = 0;
+// clang-format off
+static const char PROGMEM code_to_name[0xFF] = {
+//   0    1    2    3    4    5    6    7    8    9    A    B    c    D    E    F
+    ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l',  // 0x
+    'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2',  // 1x
+    '3', '4', '5', '6', '7', '8', '9', '0',  20,  19,  27,  26,  22, '-', '=', '[',  // 2x
+    ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ',  // 3x
+    ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ',  16, ' ', ' ', ' ',  // 4x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 5x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 6x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 7x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 8x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // 9x
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ax
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Bx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Cx
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Dx
+    'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',  // Ex
+    ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' '        // Fx
+};
+
+void add_keylog(uint16_t keycode);
+#endif
+
+#ifndef UNICODE_ENABLE
+#    define UC(x) KC_NO
+#endif
+
+/*
+ * The `LAYOUT_kyria_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them.  This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
+
+// clang-format off
+#define LAYOUT_kyria_base( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A  \
+  ) \
+  LAYOUT_wrapper( \
+      KC_ESC,  K01,     K02,     K03,     K04,     K05,                                             K06,     K07,     K08,     K09,     K0A,     KC_MINS, \
+   LALT_T(KC_TAB), K11, K12,     K13,     K14,     K15,                                             K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
+      OS_LSFT, CTL_T(K21), K22,  K23,     K24,     K25,     KC_NO,   KC_NO,       KC_NO,   KC_NO,   K26,     K27,     K28,     K29, RCTL_T(K2A), OS_RSFT, \
+                                 KC_MUTE, OS_LALT, KC_GRV,  KC_SPC,  BK_LWER,     DL_RAIS, KC_ENT,  OS_RGUI, UC(0x03A8), UC(0x2E2E) \
+    )
+/* Re-pass though to allow templates to be used */
+#define LAYOUT_kyria_base_wrapper(...)       LAYOUT_kyria_base(__VA_ARGS__)
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [_QWERTY] = LAYOUT_kyria_base_wrapper(
+        _________________QWERTY_L1_________________, _________________QWERTY_R1_________________,
+        _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,
+        _________________QWERTY_L3_________________, _________________QWERTY_R3_________________
+    ),
+
+    [_COLEMAK] = LAYOUT_kyria_base_wrapper(
+        _________________COLEMAK_L1________________, _________________COLEMAK_R1________________,
+        _________________COLEMAK_L2________________, _________________COLEMAK_R2________________,
+        _________________COLEMAK_L3________________, _________________COLEMAK_R3________________
+    ),
+
+    [_DVORAK] = LAYOUT_kyria_base_wrapper(
+        _________________DVORAK_L1_________________, _________________DVORAK_R1_________________,
+        _________________DVORAK_L2_________________, _________________DVORAK_R2_________________,
+        _________________DVORAK_L3_________________, _________________DVORAK_R3_________________
+    ),
+
+    [_WORKMAN] = LAYOUT_kyria_base_wrapper(
+        _________________WORKMAN_L1________________, _________________WORKMAN_R1________________,
+        _________________WORKMAN_L2________________, _________________WORKMAN_R2________________,
+        _________________WORKMAN_L3________________, _________________WORKMAN_R3________________
+    ),
+
+    [_NORMAN] = LAYOUT_kyria_base_wrapper(
+        _________________NORMAN_L1_________________, _________________NORMAN_L1_________________,
+        _________________NORMAN_L2_________________, _________________NORMAN_R2_________________,
+        _________________NORMAN_L3_________________, _________________NORMAN_R3_________________
+    ),
+
+    [_MALTRON] = LAYOUT_kyria_base_wrapper(
+        _________________MALTRON_L1________________, _________________MALTRON_R1________________,
+        _________________MALTRON_L2________________, _________________MALTRON_R2________________,
+        _________________MALTRON_L3________________, _________________MALTRON_R3________________
+    ),
+
+    [_EUCALYN] = LAYOUT_kyria_base_wrapper(
+        _________________EUCALYN_L1________________, _________________EUCALYN_R1________________,
+        _________________EUCALYN_L2________________, _________________EUCALYN_R2________________,
+        _________________EUCALYN_L3________________, _________________EUCALYN_R3________________
+    ),
+
+    [_CARPLAX] = LAYOUT_kyria_base_wrapper(
+        _____________CARPLAX_QFMLWY_L1_____________, _____________CARPLAX_QFMLWY_R1_____________,
+        _____________CARPLAX_QFMLWY_L2_____________, _____________CARPLAX_QFMLWY_R2_____________,
+        _____________CARPLAX_QFMLWY_L3_____________, _____________CARPLAX_QFMLWY_R3_____________
+    ),
+    [_MODS] = LAYOUT_wrapper(
+        _______, ___________________BLANK___________________,                                       ___________________BLANK___________________, _______,
+        _______, ___________________BLANK___________________,                                       ___________________BLANK___________________, _______,
+        KC_LSFT, ___________________BLANK___________________, _______, _______,   _______, _______, ___________________BLANK___________________, KC_RSFT,
+                                   _______, _______, KC_LALT, _______, _______,   _______, _______, KC_RGUI, _______, _______
+    ),
+    [_LOWER] = LAYOUT_wrapper(
+        KC_F12,  _________________LOWER_L1__________________,                                       _________________LOWER_R1__________________, KC_F11,
+        _______, _________________LOWER_L2__________________,                                       _________________LOWER_R2__________________, KC_PIPE,
+        _______, _________________LOWER_L3__________________, _______, _______,   _______, _______, _________________LOWER_R3__________________, _______,
+                                   _______, _______, _______, _______, _______,   _______, _______, _______, _______, _______
+    ),
+    [_RAISE] = LAYOUT_wrapper(
+        KC_F12,  _________________RAISE_L1__________________,                                       _________________RAISE_R1__________________, KC_F11,
+        _______, _________________RAISE_L2__________________,                                       _________________RAISE_R2__________________, KC_BSLS,
+        _______, _________________RAISE_L3__________________, _______, _______,   _______, _______, _________________RAISE_R3__________________, _______,
+                                   _______, _______, _______, _______, _______,   _______, _______, _______, _______, _______
+    ),
+    [_ADJUST] = LAYOUT_wrapper(
+        KC_MAKE, _________________ADJUST_L1_________________,                                       _________________ADJUST_R1_________________, KC_RESET,
+        VRSN,    _________________ADJUST_L2_________________,                                       _________________ADJUST_R2_________________, EEP_RST,
+        _______, _________________ADJUST_L3_________________, HPT_TOG, HPT_FBK,   MG_NKRO, UC_MOD,  _________________ADJUST_R3_________________, TG_MODS,
+                                   _______, _______, _______, KC_NUKE, _______,   _______, _______, _______, _______, _______
+    ),
+//     [_LAYERINDEX] = LAYOUT_wrapper(
+//       _______, _______, _______, _______, _______, _______,                                       _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______,                                       _______, _______, _______, _______, _______, _______,
+//       _______, _______, _______, _______, _______, _______, _______, _______,   _______, _______, _______, _______, _______, _______, _______, _______,
+//                                  _______, _______, _______, _______, _______,   _______, _______, _______, _______, _______
+//     ),
+};
+// clang-format on
+
+bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
+    if (record->event.pressed) {
+#ifdef OLED_DRIVER_ENABLE
+        oled_timer = timer_read32();
+        add_keylog(keycode);
+#endif
+#ifndef SPLIT_KEYBOARD
+        if (keycode == RESET && !is_master) {
+            return false;
+        }
+#endif
+    }
+    return true;
+}
+void matrix_init_keymap(void) { is_master = (uint8_t)is_keyboard_master(); }
+
+#ifdef OLED_DRIVER_ENABLE
+oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; }
+
+void add_keylog(uint16_t keycode) {
+    if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX) || (keycode >= QK_MODS && keycode <= QK_MODS_MAX)) {
+        keycode = keycode & 0xFF;
+    } else if (keycode > 0xFF) {
+        keycode = 0;
+    }
+
+    for (uint8_t i = (KEYLOGGER_LENGTH - 1); i > 0; --i) {
+        keylog_str[i] = keylog_str[i - 1];
+    }
+
+    if (keycode < (sizeof(code_to_name) / sizeof(char))) {
+        keylog_str[0] = pgm_read_byte(&code_to_name[keycode]);
+    }
+
+    log_timer = timer_read();
+}
+
+void update_log(void) {
+    if (timer_elapsed(log_timer) > 750) {
+        // add_keylog(0);
+    }
+}
+
+void render_keylogger_status(void) {
+    oled_write_P(PSTR("Keylogger: "), false);
+    oled_write(keylog_str, false);
+}
+
+void render_default_layer_state(void) {
+    oled_write_P(PSTR("Layout: "), false);
+    switch (get_highest_layer(default_layer_state)) {
+        case _QWERTY:
+            oled_write_ln_P(PSTR("Qwerty "), false);
+            break;
+        case _COLEMAK:
+            oled_write_ln_P(PSTR("Colemak"), false);
+            break;
+        case _DVORAK:
+            oled_write_ln_P(PSTR("Dvorak"), false);
+            break;
+        case _WORKMAN:
+            oled_write_ln_P(PSTR("Workman"), false);
+            break;
+        case _NORMAN:
+            oled_write_ln_P(PSTR("Norman"), false);
+            break;
+        case _MALTRON:
+            oled_write_ln_P(PSTR("Maltron"), false);
+            break;
+        case _EUCALYN:
+            oled_write_ln_P(PSTR("Eucalyn"), false);
+            break;
+        case _CARPLAX:
+            oled_write_ln_P(PSTR("Carplax"), false);
+            break;
+    }
+}
+
+void render_layer_state(void) {
+    oled_write_ln_P(PSTR("Layer:"), false);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("Lower"), layer_state_is(_LOWER));
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("Raise"), layer_state_is(_RAISE));
+    oled_write_P(PSTR(" "), false);
+    oled_write_ln_P(PSTR("Mods"), layer_state_is(_MODS));
+}
+
+void render_keylock_status(uint8_t led_usb_state) {
+    oled_write_P(PSTR("Lock: "), false);
+    oled_write_P(PSTR("NUM"), led_usb_state & (1 << USB_LED_NUM_LOCK));
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("CAPS"), led_usb_state & (1 << USB_LED_CAPS_LOCK));
+    oled_write_P(PSTR(" "), false);
+    oled_write_ln_P(PSTR("SCL"), led_usb_state & (1 << USB_LED_SCROLL_LOCK));
+}
+
+void render_mod_status(uint8_t modifiers) {
+    oled_write_P(PSTR("Mods: "), false);
+    oled_write_P(PSTR("Sft"), (modifiers & MOD_MASK_SHIFT));
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("Ctl"), (modifiers & MOD_MASK_CTRL));
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("Alt"), (modifiers & MOD_MASK_ALT));
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("GUI"), (modifiers & MOD_MASK_GUI));
+}
+
+void render_bootmagic_status(void) {
+    /* Show Ctrl-Gui Swap options */
+    static const char PROGMEM logo[][2][3] = {
+        {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}},
+        {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}},
+    };
+    oled_write_P(PSTR("Boot  "), false);
+    oled_write_P(logo[0][0], !keymap_config.swap_lctl_lgui);
+    oled_write_P(logo[1][0], keymap_config.swap_lctl_lgui);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("NKRO"), keymap_config.nkro);
+    oled_write_P(PSTR(" "), false);
+    oled_write_ln_P(PSTR("GUI"), !keymap_config.no_gui);
+    oled_write_P(PSTR("Magic "), false);
+    oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui);
+    oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("GRV"), keymap_config.swap_grave_esc);
+    oled_write_P(PSTR("  "), false);
+    oled_write_ln_P(PSTR("CAPS"), keymap_config.swap_control_capslock);
+}
+
+void render_user_status(void) {
+    oled_write_P(PSTR("USER: "), false);
+    oled_write_P(PSTR("Anim"), userspace_config.rgb_matrix_idle_anim);
+    oled_write_P(PSTR(" "), false);
+    oled_write_P(PSTR("Layr"), userspace_config.rgb_layer_change);
+    oled_write_P(PSTR(" "), false);
+    oled_write_ln_P(PSTR("Nuke"), userspace_config.nuke_switch);
+}
+
+// clang-format off
+void render_logo(void) {
+    static const char PROGMEM qmk_logo[] = {
+        0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
+        0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
+        0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
+
+    oled_write_P(qmk_logo, false);
+}
+
+#    ifndef SPLIT_TRANSPORT_MIRROR
+void render_kyria_logo(void) {
+    static const char PROGMEM kyria_logo[] = {
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7,  7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,192,224,240,124, 62, 31, 15,  7,  3,  1,128,192,224,240,120, 56, 60, 28, 30, 14, 14,  7,  7,135,231,127, 31,255,255, 31,127,231,135,  7,  7, 14, 14, 30, 28, 60, 56,120,240,224,192,128,  1,  3,  7, 15, 31, 62,124,240,224,192,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,240,252,255, 31,  7,  1,  0,  0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135,  1,  0,  0,255,255,  0,  0,  1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192,  0,  0,  1,  7, 31,255,252,240,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,254,255,255,  1,  1,  7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30,  7,  1,  1,255,255,254,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0,255,255,  0,  0,192,192, 48, 48,  0,  0,240,240,  0,  0,  0,  0,  0,  0,240,240,  0,  0,240,240,192,192, 48, 48, 48, 48,192,192,  0,  0, 48, 48,243,243,  0,  0,  0,  0,  0,  0, 48, 48, 48, 48, 48, 48,192,192,  0,  0,  0,  0,  0,
+        0,  0,  0,255,255,255,  0,  0,  0,  0,  0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31,  7,255,255,  7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127,  0,  0,  0,  0,  0,255,255,255,  0,  0,  0,  0, 63, 63,  3,  3, 12, 12, 48, 48,  0,  0,  0,  0, 51, 51, 51, 51, 51, 51, 15, 15,  0,  0, 63, 63,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0, 48, 48, 63, 63, 48, 48,  0,  0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63,  0,  0,  0,  0,  0,
+        0,  0,  0,  0, 15, 63,255,248,224,128,  0,  0,  3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128,  0,  0,255,255,  0,  0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15,  3,  0,  0,128,224,248,255, 63, 15,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  3,  7, 15, 62,124,248,240,224,192,128,  1,  3,  7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15,  7,  3,  1,128,192,224,240,248,124, 62, 15,  7,  3,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,
+        0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  3,  7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15,  7,  3,  1,  1,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0
+    };
+    oled_write_raw_P(kyria_logo, sizeof(kyria_logo));
+}
+#    endif
+// clang-format on
+
+void render_status_main(void) {
+    /* Show Keyboard Layout  */
+    render_default_layer_state();
+    render_keylock_status(host_keyboard_leds());
+    render_bootmagic_status();
+    render_user_status();
+
+    render_keylogger_status();
+}
+
+void render_status_secondary(void) {
+    /* Show Keyboard Layout  */
+    render_logo();
+    render_default_layer_state();
+    render_layer_state();
+    render_mod_status(get_mods() | get_oneshot_mods());
+
+    render_keylogger_status();
+}
+
+void oled_task_user(void) {
+    if (timer_elapsed32(oled_timer) > 30000) {
+        oled_off();
+        return;
+    }
+#    ifndef SPLIT_KEYBOARD
+    else {
+        oled_on();
+    }
+#    endif
+
+    update_log();
+    if (is_master) {
+        render_status_main();  // Renders the current keyboard state (layer, lock, caps, scroll, etc)
+    } else {
+#    ifdef SPLIT_TRANSPORT_MIRROR
+        render_status_secondary();
+#    else
+        render_kyria_logo();
+#    endif
+    }
+}
+
+#endif
+
+#ifdef ENCODER_ENABLE
+void encoder_update_user(uint8_t index, bool clockwise) {
+    if (index == 0) {
+        // Volume control
+        if (clockwise) {
+            tap_code(KC_VOLU);
+        } else {
+            tap_code(KC_VOLD);
+        }
+    } else if (index == 1) {
+        // Page up/Page down
+        if (clockwise) {
+            tap_code(KC_PGDN);
+        } else {
+            tap_code(KC_PGUP);
+        }
+    }
+}
+#endif
diff --git a/keyboards/kyria/keymaps/drashna/rules.mk b/keyboards/kyria/keymaps/drashna/rules.mk
new file mode 100644
index 0000000000..c1a37f5c59
--- /dev/null
+++ b/keyboards/kyria/keymaps/drashna/rules.mk
@@ -0,0 +1,22 @@
+OLED_DRIVER_ENABLE = yes   # Enables the use of OLED displays
+ENCODER_ENABLE = yes       # ENables the use of one or more encoders
+RGBLIGHT_ENABLE = yes      # Enable keyboard RGB underglow
+RGBLIGHT_STARTUP_ANIMATION = yes
+
+BOOTMAGIC_ENABLE = no      # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no      # Mouse keys
+EXTRAKEY_ENABLE = yes      # Audio control and System control
+CONSOLE_ENABLE = no        # Console for debug
+COMMAND_ENABLE = no        # Commands for debug and configuration
+NKRO_ENABLE = no           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE = no           # MIDI support
+UNICODE_ENABLE = yes       # Unicode
+BLUETOOTH_ENABLE = no      # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no          # Audio output on port C6
+FAUXCLICKY_ENABLE = no     # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no        # Enable support for HD44780 based LCDs
+
+BOOTLOADER = atmel-dfu
+
+SPLIT_TRANSPORT = mirror
diff --git a/keyboards/orthodox/keymaps/drashna/config.h b/keyboards/orthodox/keymaps/drashna/config.h
index 4719c22696..585c916404 100644
--- a/keyboards/orthodox/keymaps/drashna/config.h
+++ b/keyboards/orthodox/keymaps/drashna/config.h
@@ -34,41 +34,40 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* key combination for magic key command */
 #undef IS_COMMAND
-#define IS_COMMAND() ( \
-    get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT)) \
-)
+#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_LALT)))
 
 #ifdef RGBLIGHT_ENABLE
-#   define RGB_DI_PIN D3
-#   define RGBLED_NUM 16     // Number of LEDs
-#   define RGBLED_SPLIT { 8, 8 }
-
-#   define RGBLIGHT_HUE_STEP 12
-#   define RGBLIGHT_SAT_STEP 12
-#   define RGBLIGHT_VAL_STEP 12
-#   define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
-#   define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
-#endif // RGBLIGHT_ENABLE
+#    define RGB_DI_PIN D3
+#    define RGBLED_NUM 16  // Number of LEDs
+#    define RGBLED_SPLIT \
+        { 8, 8 }
+
+#    define RGBLIGHT_HUE_STEP 12
+#    define RGBLIGHT_SAT_STEP 12
+#    define RGBLIGHT_VAL_STEP 12
+#    define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2
+#    define RGBLIGHT_EFFECT_SNAKE_LENGTH 2
+#endif  // RGBLIGHT_ENABLE
 
 #ifdef AUDIO_ENABLE
-#   define C6_AUDIO
-#   ifdef RGBLIGHT_ENABLE
-#       define NO_MUSIC_MODE
-#   endif
-#endif //AUDIO_ENABLE
+#    define C6_AUDIO
+#    ifdef RGBLIGHT_ENABLE
+#        define NO_MUSIC_MODE
+#    endif
+#endif  // AUDIO_ENABLE
 
 #undef PRODUCT
 #ifdef KEYBOARD_orthodox_rev1
-#   define PRODUCT         Drashna Hacked Orthodox Rev.1
+#    define PRODUCT Drashna Hacked Orthodox Rev .1
 #elif KEYBOARD_orthodox_rev3
-#   define PRODUCT         Drashna Hacked Orthodox Rev.3
+#    define PRODUCT Drashna Hacked Orthodox Rev .3
 #endif
 
-#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_OUTPUT D7  // usually COL
 #ifdef KEYBOARD_orthodox_rev1
-#   define QMK_ESC_INPUT D4 // usually ROW
+#    define QMK_ESC_INPUT D4  // usually ROW
 #else
-#   define QMK_ESC_INPUT D2 // usually ROW
+#    define QMK_ESC_INPUT D2  // usually ROW
 #endif
 #define QMK_LED B0
 #define QMK_SPEAKER C6
diff --git a/keyboards/orthodox/keymaps/drashna/keymap.c b/keyboards/orthodox/keymaps/drashna/keymap.c
index bf6b62b41f..2dbe186343 100644
--- a/keyboards/orthodox/keymaps/drashna/keymap.c
+++ b/keyboards/orthodox/keymaps/drashna/keymap.c
@@ -1,35 +1,12 @@
-/*
-This is the keymap for the keyboard
-
-Copyright 2012 Jun Wako <wakojun@gmail.com>
-Copyright 2015 Jack Humbert
-Copyright 2017 Art Ortenburger
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include QMK_KEYBOARD_H
 #include "drashna.h"
 
-#ifdef INDICATOR_LIGHTS
-extern userspace_config_t userspace_config;
-
-uint8_t last_mod;
-uint8_t last_led;
-uint8_t last_osm;
-#endif
-
+/*
+ * The `LAYOUT_orthodox_base` macro is a template to allow the use of identical
+ * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so
+ * that there is no need to set them up for each layout, and modify all of
+ * them if I want to change them.  This helps to keep consistency and ease
+ * of use. K## is a placeholder to pass through the individual keycodes
+ */
 // clang-format off
 #define LAYOUT_orthodox_base( \
     K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \
@@ -38,7 +15,7 @@ uint8_t last_osm;
   ) \
   LAYOUT_wrapper( \
     KC_ESC,  K01,    K02,     K03,      K04,     K05,                                                             K06,     K07,     K08,     K09,     K0A,     KC_BSPC, \
-    KC_TAB,  ALT_T(K11), K12, K13,      K14,     K15,              OS_LALT, OS_LGUI,   OS_RALT, RAISE,            K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
+    LALT_T(KC_TAB), K11, K12, K13,      K14,     K15,              OS_LALT, OS_LGUI,   OS_RALT, RAISE,            K16,     K17,     K18,     K19,     K1A, RALT_T(KC_QUOT), \
     KC_MLSF, CTL_T(K21), K22, K23,      K24,     K25,     LOWER,   KC_SPACE,KC_BSPC,   KC_DEL,  KC_ENT,  RAISE,   K26,     K27,     K28,     K29, RCTL_T(K2A), KC_MRSF  \
   )
 #define LAYOUT_orthodox_base_wrapper(...)       LAYOUT_orthodox_base(__VA_ARGS__)