Add Arm Teensys to mcu_selection.mk (#8026)

* Add Arm Teensys to mcu_selection.mk

* Roll back halfkeyboard keymap changes

* Remove extra newline

6 files changed, 27 insertions, 224 deletions

diff --git a/keyboards/ergodox_infinity/rules.mk b/keyboards/ergodox_infinity/rules.mk
index 329ea8b988..31bc20454c 100644
--- a/keyboards/ergodox_infinity/rules.mk
+++ b/keyboards/ergodox_infinity/rules.mk
@@ -1,15 +1,5 @@
-# project specific files
-SRC =	matrix.c \
-	led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
+# MCU name
+MCU = MK20DX256
 
 # Linker script to use
 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
@@ -23,32 +13,6 @@ MCU_SERIES = K20x
 #   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
 MCU_LDSCRIPT = MK20DX256BLDR8
 
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity 60%
-#   - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-#   - MCHCK_K20 for Infinity KB
-#BOARD = MCHCK_K20
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
 # Vector table for application
 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
@@ -92,4 +56,8 @@ LED_DRIVER = is31fl3731c
 LED_WIDTH = 7
 LED_HEIGHT = 7
 
+# project specific files
+SRC = matrix.c \
+      led.c
+
 LAYOUTS = ergodox
diff --git a/keyboards/handwired/onekey/teensy_32/rules.mk b/keyboards/handwired/onekey/teensy_32/rules.mk
index 2c411c0eb6..c1b90d0d2b 100644
--- a/keyboards/handwired/onekey/teensy_32/rules.mk
+++ b/keyboards/handwired/onekey/teensy_32/rules.mk
@@ -1,45 +1,5 @@
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX256
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
+# MCU name
+MCU = MK20DX256
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/handwired/onekey/teensy_lc/rules.mk b/keyboards/handwired/onekey/teensy_lc/rules.mk
index 32ab07d9c1..c307307252 100644
--- a/keyboards/handwired/onekey/teensy_lc/rules.mk
+++ b/keyboards/handwired/onekey/teensy_lc/rules.mk
@@ -1,45 +1,5 @@
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = KL2x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MKL26Z64
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = kl2x
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_LC
-
-# Cortex version
-# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
-MCU  = cortex-m0plus
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 6
-
+# MCU name
+MCU = MKL26Z64
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/infinity60/rules.mk b/keyboards/infinity60/rules.mk
index f93766af97..579eab0f3f 100644
--- a/keyboards/infinity60/rules.mk
+++ b/keyboards/infinity60/rules.mk
@@ -1,16 +1,5 @@
-# project specific files
-SRC =	matrix.c \
-	led.c \
-	led_controller.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
+# MCU name
+MCU = MK20DX128
 
 # Linker script to use
 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
@@ -23,14 +12,6 @@ MCU_SERIES = K20x
 #   - MK20DX128BLDR4 for Infinity with Kiibohd bootloader
 MCU_LDSCRIPT = MK20DX128BLDR4
 
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity KB
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
 # - BOARD =
@@ -40,14 +21,6 @@ MCU_STARTUP = k20x5
 #   - MCHCK_K20 for Infinity KB
 BOARD = MCHCK_K20
 
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
 # Vector table for application
 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
@@ -72,6 +45,11 @@ SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes	    # USB Nkey Rollover
 CUSTOM_MATRIX = yes # Custom matrix file
 
+# project specific files
+SRC = matrix.c \
+      led.c \
+      led_controller.c
+
 LAYOUTS = 60_ansi_split_bs_rshift
 
 
diff --git a/keyboards/k_type/rules.mk b/keyboards/k_type/rules.mk
index e53f316b99..56c4c606e3 100644
--- a/keyboards/k_type/rules.mk
+++ b/keyboards/k_type/rules.mk
@@ -1,14 +1,5 @@
-# project specific files
-SRC =	matrix.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
+# MCU name
+MCU = MK20DX256
 
 # Linker script to use
 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
@@ -22,40 +13,12 @@ MCU_SERIES = K20x
 #   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
 MCU_LDSCRIPT = MK20DX256BLDR8
 
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity KB
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x7
-
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-#   - MCHCK_K20 for Infinity KB
-
 # This board was copied from PJRC_TEENSY_3_1. The only difference should be a
 # hack to ensure the watchdog has started before trying to disable it.
 BOARD = IC_TEENSY_3_1
 
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootloader.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-#OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
-OPT_DEFS =
-
 DFU_ARGS = -d 1c11:b007
 DFU_SUFFIX_ARGS = -p b007 -v 1c11
 
@@ -75,6 +38,8 @@ NKRO_ENABLE = yes	    # USB Nkey Rollover
 CUSTOM_MATRIX = yes # Custom matrix file
 DEBUG_ENABLE = yes
 
+# project specific files
+SRC = matrix.c
 
 # Enter lower-power sleep mode when on the ChibiOS idle thread
 OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk
index 27c3c31416..14507e9dd2 100644
--- a/keyboards/whitefox/rules.mk
+++ b/keyboards/whitefox/rules.mk
@@ -1,15 +1,5 @@
-# project specific files
-SRC =	matrix.c \
-	led.c
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-# - For Infinity KB, SERIES = K20x
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
+# MCU name
+MCU = MK20DX256
 
 # Linker script to use
 # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
@@ -23,14 +13,6 @@ MCU_SERIES = K20x
 #   - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
 MCU_LDSCRIPT = MK20DX256BLDR8
 
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0 and Infinity KB
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x7
-
 # Board: it should exist either in <chibios>/os/hal/boards/
 #  or <this_dir>/boards
 # - BOARD =
@@ -40,20 +22,6 @@ MCU_STARTUP = k20x7
 #   - MCHCK_K20 for Infinity KB
 BOARD = IC_TEENSY_3_1
 
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-#OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
-OPT_DEFS =
-
 DFU_ARGS = -d 1c11:b007
 DFU_SUFFIX_ARGS = -p b007 -v 1c11
 
@@ -75,6 +43,10 @@ BACKLIGHT_ENABLE = yes
 BACKLIGHT_DRIVER = custom
 VISUALIZER_ENABLE = yes
 
+# project specific files
+SRC = matrix.c \
+      led.c
+
 LED_DRIVER = is31fl3731c
 LED_WIDTH = 16
 LED_HEIGHT = 5