Next set of split_common changes (#4974)

* Update split_common to use standard i2c drivers

* Eliminate RGB_DIRTY/BACKLIT_DIRTY

* Fix avr i2c_master error handling

* Fix i2c_slave addressing

* Remove unneeded timeout on i2c_stop()

* Fix RGB I2C transfers

* Remove incorrect comment

6 files changed, 28 insertions, 28 deletions

diff --git a/keyboards/cannonkeys/satisfaction75/i2c_master.c b/keyboards/cannonkeys/satisfaction75/i2c_master.c
index a19dbcc9f5..d81eb92d49 100644
--- a/keyboards/cannonkeys/satisfaction75/i2c_master.c
+++ b/keyboards/cannonkeys/satisfaction75/i2c_master.c
@@ -109,7 +109,7 @@ uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t l
 }
 
 // This is usually not needed. It releases the driver to allow pins to become GPIO again.
-uint8_t i2c_stop(uint16_t timeout)
+uint8_t i2c_stop(void)
 {
   i2cStop(&I2C_DRIVER);
   return 0;
diff --git a/keyboards/dc01/left/matrix.c b/keyboards/dc01/left/matrix.c
index cbe3b3f3d8..a3db220e4f 100644
--- a/keyboards/dc01/left/matrix.c
+++ b/keyboards/dc01/left/matrix.c
@@ -455,10 +455,10 @@ i2c_status_t i2c_transaction(uint8_t address, uint32_t mask, uint8_t col_offset)
         matrix[MATRIX_ROWS - 1] |= ((uint32_t)err << (MATRIX_COLS_SCANNED + col_offset)); //add new bits at the end
 
     } else {
-        i2c_stop(10);
+        i2c_stop();
         return 1;
     }
 
-    i2c_stop(10);
+    i2c_stop();
     return 0;
 }
\ No newline at end of file
diff --git a/keyboards/ergodox_ez/ergodox_ez.c b/keyboards/ergodox_ez/ergodox_ez.c
index 3b2c943506..b27a6b89da 100644
--- a/keyboards/ergodox_ez/ergodox_ez.c
+++ b/keyboards/ergodox_ez/ergodox_ez.c
@@ -128,7 +128,7 @@ uint8_t init_mcp23018(void) {
     mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT);            if (mcp23018_status) goto out;
     mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
     mcp23018_status = i2c_write(0b00111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
-    i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+    i2c_stop();
 
     // set pull-up
     // - unused  : on  : 1
@@ -140,7 +140,7 @@ uint8_t init_mcp23018(void) {
     mcp23018_status = i2c_write(0b00111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
 
 out:
-    i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+    i2c_stop();
 
 #ifdef LEFT_LEDS
     if (!mcp23018_status) mcp23018_status = ergodox_left_leds_update();
@@ -179,7 +179,7 @@ uint8_t ergodox_left_leds_update(void) {
     if (mcp23018_status) goto out;
 
  out:
-    i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+    i2c_stop();
     return mcp23018_status;
 }
 #endif
diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c
index 22837d312a..860cf7b229 100644
--- a/keyboards/ergodox_ez/matrix.c
+++ b/keyboards/ergodox_ez/matrix.c
@@ -309,7 +309,7 @@ static matrix_row_t read_cols(uint8_t row)
             data = ~((uint8_t)mcp23018_status);
             mcp23018_status = I2C_STATUS_SUCCESS;
         out:
-            i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+            i2c_stop();
             return data;
         }
     } else {
@@ -362,7 +362,7 @@ static void select_row(uint8_t row)
             mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);                 if (mcp23018_status) goto out;
             mcp23018_status = i2c_write(0xFF & ~(1<<row), ERGODOX_EZ_I2C_TIMEOUT);      if (mcp23018_status) goto out;
         out:
-            i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+            i2c_stop();
         }
     } else {
         // select on teensy
diff --git a/keyboards/gergo/gergo.c b/keyboards/gergo/gergo.c
index d32792e2a8..cc0bef391d 100644
--- a/keyboards/gergo/gergo.c
+++ b/keyboards/gergo/gergo.c
@@ -47,7 +47,7 @@ uint8_t init_mcp23018(void) {
     mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT);            if (mcp23018_status) goto out;
     mcp23018_status = i2c_write(0b10000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
     mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
-    i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+    i2c_stop();
 
     // set pull-up
     // - unused  : on  : 1
@@ -59,7 +59,7 @@ uint8_t init_mcp23018(void) {
     mcp23018_status = i2c_write(0b11111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
 
 out:
-    i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+    i2c_stop();
     // SREG=sreg_prev;
     //uprintf("Init %x\n", mcp23018_status);
     return mcp23018_status;
diff --git a/keyboards/gergo/matrix.c b/keyboards/gergo/matrix.c
index 29fe48ccb3..9886ecf153 100644
--- a/keyboards/gergo/matrix.c
+++ b/keyboards/gergo/matrix.c
@@ -72,14 +72,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //Trackball pin defs
 #define TRKUP (1<<4)
 #define TRKDN (1<<5)
-#define TRKLT (1<<6) 
+#define TRKLT (1<<6)
 #define TRKRT (1<<7)
 #define TRKBTN (1<<6)
 
 
 // Multiple for mouse moves
 #ifndef TRKSTEP
-#define TRKSTEP 20 
+#define TRKSTEP 20
 #endif
 
 // multiple for mouse scroll
@@ -98,13 +98,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // Trackball interrupts accumulate over here. Processed on scan
 // Stores prev state of mouse, high bits store direction
-uint8_t trkState    = 0; 
-uint8_t trkBtnState = 0; 
+uint8_t trkState    = 0;
+uint8_t trkBtnState = 0;
 
-volatile uint8_t tbUpCnt  = 0; 
-volatile uint8_t tbDnCnt  = 0; 
-volatile uint8_t tbLtCnt  = 0; 
-volatile uint8_t tbRtCnt  = 0; 
+volatile uint8_t tbUpCnt  = 0;
+volatile uint8_t tbDnCnt  = 0;
+volatile uint8_t tbLtCnt  = 0;
+volatile uint8_t tbRtCnt  = 0;
 
 /* matrix state(1:on, 0:off) */
 static matrix_row_t matrix[MATRIX_ROWS];
@@ -240,14 +240,14 @@ uint8_t matrix_scan(void)
   // First we handle the mouse inputs
   #ifdef BALLER
   uint8_t pBtn   = PINE & TRKBTN;
-  
+
   #ifdef DEBUG_BALLER
-  // Compare to previous, mod report 
+  // Compare to previous, mod report
   if (tbUpCnt + tbDnCnt + tbLtCnt + tbRtCnt != 0)
     xprintf("U: %d D: %d L: %d R: %d B: %d\n", tbUpCnt, tbDnCnt, tbLtCnt, tbRtCnt, (trkBtnState >> 6));
   #endif
 
-  // Modify the report 
+  // Modify the report
   report_mouse_t pRprt = pointing_device_get_report();
 
   // Scroll by default, move on layer
@@ -264,7 +264,7 @@ uint8_t matrix_scan(void)
   }
 
   #ifdef DEBUG_BALLER
-  if (pRprt.x != 0 || pRprt.y != 0) 
+  if (pRprt.x != 0 || pRprt.y != 0)
 	xprintf("X: %d Y: %d\n", pRprt.x, pRprt.y);
   #endif
 
@@ -272,7 +272,7 @@ uint8_t matrix_scan(void)
   if ((pBtn != trkBtnState) && ((pBtn >> 6) == 1))  pRprt.buttons &= ~MOUSE_BTN1;
 
   // Save state, push update
-  if (pRprt.x != 0 || pRprt.y != 0 || pRprt.h != 0 || pRprt.v != 0 || (trkBtnState != pBtn)) 
+  if (pRprt.x != 0 || pRprt.y != 0 || pRprt.h != 0 || pRprt.v != 0 || (trkBtnState != pBtn))
     pointing_device_set_report(pRprt);
 
   trkBtnState = pBtn;
@@ -325,8 +325,8 @@ uint8_t matrix_scan(void)
     enableInterrupts();
 
 #ifdef DEBUG_MATRIX
-    for (uint8_t c = 0; c < MATRIX_COLS; c++) 
-		for (uint8_t r = 0; r < MATRIX_ROWS; r++) 
+    for (uint8_t c = 0; c < MATRIX_COLS; c++)
+		for (uint8_t r = 0; r < MATRIX_ROWS; r++)
 		  if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c);
 #endif
 
@@ -394,7 +394,7 @@ static matrix_row_t read_cols(uint8_t row)
             data = ~((uint8_t)mcp23018_status);
             mcp23018_status = I2C_STATUS_SUCCESS;
         out:
-            i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+            i2c_stop();
 
 #ifdef DEBUG_MATRIX
             if (data != 0x00) xprintf("I2C: %d\n", data);
@@ -439,12 +439,12 @@ static void select_row(uint8_t row)
     if (row < 7) {
         // select on mcp23018
         if (mcp23018_status) { // do nothing on error
-        } else { // set active row low  : 0 // set other rows hi-Z : 1 
+        } else { // set active row low  : 0 // set other rows hi-Z : 1
             mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
             mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);                 if (mcp23018_status) goto out;
             mcp23018_status = i2c_write(0xFF & ~(1<<row), ERGODOX_EZ_I2C_TIMEOUT);      if (mcp23018_status) goto out;
         out:
-            i2c_stop(ERGODOX_EZ_I2C_TIMEOUT);
+            i2c_stop();
         }
     } else {
         // Output low(DDR:1, PORT:0) to select